Search Results (557)

Background/Objectives: 3D patient-specific corrective osteotomies are optimized for use with oscillating saws, thereby rendering it incapable of executing curved osteotomies. The aim of this technical note is to introduce and evaluate the Panflute technique, which facilitates curved osteotomies with precise depth control for intra-articular corrective osteotomies in posttraumatic tibial plateau malunions. Methods: A 33-year-old male patient with an intra-articular malunion was treated one year after index surgery of a lateral split-depression tibial plateau fracture with the Panflute technique. The guide design allowed for multiple drill trajectories in a curved path, recreating the original fracture lines. Cylindrical drill tubes in the guide were tailored to match bone trajectory length. This resulted in a patient-specific Panflute-like design enabling precise depth control, safeguarding posterior neurovascular structures. Secondly, the recreated fragment was reduced with a reduction guide, applied to the plate in situ, to facilitate reposition using the plate as tool and reference. Results: The procedure went without technical drawbacks or surgical complications. Postoperative assessment showed that repositioning of the osteotomized articular fragment was performed accurately: pre- to postoperative translational corrections were 5.4 to 0.5 mm posterior displacement for AP deformity (x-axis); 2.9 to 1.0 mm lateral to medial reduction (y-axis); and 5.9 to 0.6 mm cranial-caudal correction (z-axis). Clinically, at 3 months, the fracture united, the patient regained full flexion, and valgus defect-laxity resolved. Conclusions: The presented Panflute-osteotomy guide allows for a pre-planned curved osteotomy. Additionally, for every drill trajectory, the depth could be controlled. The proposed method may expand our surgical armamentarium of patient-specific 3D techniques and solutions for complex intra-articular osteotomies. Full article

This study evaluates the thermal impact of a one-drill protocol for osteotomy preparation in dental implant surgery. Our findings demonstrate a significant reduction in heat generation compared to traditional sequential drilling, suggesting potential benefits for implant osseointegration and patient comfort. Specifically, the one-drill protocol was associated with lower peak temperatures and a reduced duration of elevated temperatures. These findings suggest that the one-drill protocol may contribute to improved implant stability and reduce the risk of thermal-induced bone damage. While further research is needed to confirm these findings in clinical settings, the results of this study provide promising evidence for the potential advantages of the one-drill protocol in dental implant surgery. Additionally, the one-drill protocol may offer simplified surgical workflows and reduced instrument management, potentially leading to improved efficiency and cost-effectiveness in dental implant procedures. Full article

Background and Objectives: The most popular surgical procedures among orthognathic surgeries for Class II and III patients are Le Fort 1 osteotomy for the maxilla and bilateral sagittal split ramus osteotomy (BSSRO) for the mandible. Keeping the condyle in its proper place during fixation is one of the difficulties of orthognathic surgery. One of the worst post-orthognathic surgery consequences in the temporomandibular joint (TMJ) area may be condylar resorption. Condylar remodeling refers to a group of processes that occur in reaction to forces and stress placed on the temporomandibular joint in order to preserve morphological, functional, and occlusal balance. A systematic review of the literature was performed with the aim of identifying the mandibular condylar component of TMJ changes after orthognathic surgery in class II and III patients. Materials and Methods: An electronic search was carried out using the PubMed, Cochrane Library, and Google Scholar, databases. The inclusion criteria included trials in non-growing patients upon whom orthognathic surgery was performed due to Angle II or Angle III classes malocclusion; in addition, a CT or cone beam computed tomography (CBCT) scan was performed before and after surgery to track the mandibular condylar component of TMJ changes. The quality of the studies was evaluated by two independent authors. The risk of bias was assessed by using the Downs and Black checklist. Results: The electronic and manual literature search yielded 12 studies that fulfilled all necessary inclusion criteria. Observed studies were evaluated as good (3), fair (8), and poor (1) quality. Two studies evaluated class II patients, six studies observed class III patients, and four studies were comparative. Most of the studies evaluated condyle angle and space changes, and the condylar surface and volume changes were also observed. However, the methodology of evaluation in the publications differs. Conclusions: Reduction of bone density, especially in class II patients, and morphological condyle reshaping, with the apposition of the bone, is the main adaptive mechanism after orthognathic surgery. However, all of the studies we examined were conducted using different methods of evaluation, measurement, and reference points. Full article

This study aimed to evaluate the differential positional changes of the proximal and distal segments during mandibular setback surgery relapse. Thirty patients with mandibular prognathism who underwent bilateral sagittal split ramus osteotomy were included. Skull models from pretreatment, postsurgery, and post-treatment cone-beam computed tomography were superimposed to evaluate condylar displacement and rotational changes, and to determine the center of rotation (C_Rot) in the proximal and distal segments. During postsurgical relapse, the proximal segment rotated 2.4 ± 2.1° counterclockwise, with the C_Rot located near the mandibular condyle. The distal segment rotated 2.0 ± 2.3° counterclockwise, resulting in forward and upward movement of the chin. The displaced condyle partially returned to its original position during postsurgical orthodontic treatment. A vertical bony step (VBS) between the proximal and distal segments commonly occurs during mandibular setback surgery. As the VBS increases, the C_Rot of the distal segment shifts posterosuperiorly, following a predictable pattern outlined by regression equations. These findings suggest that relapse after mandibular setback surgery consistently occurs in an anterosuperior direction, with translatory movement becoming more prominent as the VBS increases. Including these regression equations in presurgical planning can enhance the precision of relapse simulations and help clinicians more accurately anticipate postsurgical relapse. Full article

Early-stage knee osteoarthritis is often suitable for treatment with high tibial osteotomy (HTO). This is an effective joint-preserving treatment, resulting in good postoperative outcomes. To overcome the limitations of traditional HTO, the surgical technique and correction accuracy can be enhanced by personalised procedures using three-dimensional digital planning and metal additive manufacturing, The purpose of this clinical trial study was to evaluate the three-dimensional accuracy of a new personalised HTO procedure, using modern imaging techniques, 3D modelling, and distance map analysis (DMA). Twenty-five patients were treated with the personalised HTO procedure. Before surgery and after 6 months, they underwent clinical evaluation scoring, radiographic imaging, and computed-tomography scanning to generate morphological models. Specifically, preoperative tibia models were used to plan the tibia correction and the design and position of the fixation plate. Preoperative, planned, and postoperative models were imported in computer-aided and designing software (Geomagic ControlTM 2014, 3D Systems, Rock Hill, SC, USA) for DMA implementation to assess geometrical differences between model surfaces. A very good reproduction of the planned tibia morphology was achieved postoperatively (average differences between −0.9 mm and 1.4 mm). DMA values associated with fixation-plate deformation were less than 1 mm, similar to those for plate-to-tibia surface-contour matching. Overall, personalised digitally planned HTO utilising three-dimensional printed surgical guides and plates enables accurate planned correction and plate placement. Full article

Background: Stem revisions in revision total hip arthroplasty (THA) with proximal bone stock loss may be dealt with utilizing modular, uncemented conical stems. During stem extraction, surgeons may resort to extended trochanteric osteotomy (ETO). However, ETO is associated with extensive blood loss and infections. This study compared the clinical outcomes, radiographic results and complications in THA revisions utilizing conical modular stem with and without ETO. Methods: Patients who underwent revision THA with or without ETO were assessed retrospectively. The minimal follow-up was 3 years. The functional evaluation included Harris Hip Score (HHS) and Short Form 36 (SF-36) as well as Western Ontario and McMaster Universities Arthritis Index (WOMAC) and Numerical Rating Scale for pain assessment. The radiographic evaluation comprised bone defect assessment, osteotomy healing, stem migration and position, presence of radiolucent lines and stress shielding. Results: In total, 73 patients (80 hips) were included in the final analysis. The ETO group comprised 48 hips, and the no-ETO group comprised 32 hips. In the ETO group, pre-operative WOMAC scores were lower than in the no-ETO group (p = 0.012). No significant differences were found in terms of post-operative HHS, WOMAC, and NRS scores between groups, except worse results were found in the case of claw plate implantation. Patients in the no-ETO group exhibited better results in SF-36 than in the ETO-group. Osteotomy non-union was observed in four hips (9.5%). Stam varus/valgus position was within ±1.5 degrees (85.9%). Conclusions: ETO does not adversely impact outcomes in patients undergoing femoral stem revisions with modular conical stems. The invasive nature of these procedures prompts careful consideration in each case individually. Full article

Background/Objectives: Hallux valgus is a common foot deformity that requires surgical correction to restore proper alignment. Precision in the osteotomies performed during these surgeries is critical to avoid complications and improve outcomes. However, variability in surgeon experience can negatively affect precision. In this context, advances in 3D printing have enabled the development of customized surgical guides, which may enhance precision and reduce variability among surgeons with different levels of expertise. This study aims to evaluate the effectiveness of a 3D-printed surgical guide in minimally invasive hallux valgus correction, focusing on the accuracy of osteotomies performed by novice surgeons, experienced surgeons, and theoretically trained consultants. Methods: An ex vivo study was performed with 30 cadaveric feet, divided into three groups according to the level of experience of the surgeons: 3D guide group, Master’s students, professionals. All surgeons performed Akin and Reverdin-Isham osteotomies, but the experimental group (the 3D guide group) utilized a customized 3D-printed surgical guide for enhanced precision during these procedures. Radiographic measurements of osteotomy angles and alignment were taken after the interventions, and compared with the planned values. Statistical analyses were conducted to evaluate the variability in the precision of the cuts. Results: The use of the 3D-printed surgical guide significantly reduced angular variability in the experienced group, achieving higher levels of accuracy than experienced surgeons. Effect sizes, which ranged from small to large, indicated a greater impact on angle measurements (η² = 0.46, p < 0.001); no significant differences were found between the groups in other evaluated parameters. Conclusions: The incorporation of 3D-printed surgical guides in hallux valgus surgery significantly improves osteotomy accuracy, particularly in less experienced surgeons. This suggests that these guides can help standardize procedures, reduce the learning curve, and lower intraoperative complications. Full article

Background: With the rise of new 3D printers, assessing accuracy is crucial for obtaining the best results in patient care. Previous studies have shown that the highest accuracy is achieved with SLS printing technology; however, SLA printing technology has made significant improvements in recent years. Methods: In this study, a realistic anatomical model of a mandible and skull, a cutting guide for mandibular osteotomy, and a splint for orthognathic surgery were replicated five times each using two different 3D printing technologies: SLA and SLS. Results: The SLA group had a median trueness RMS value of 0.148 mm and a precision RMS value of 0.117 mm. The SLS group had a median trueness RMS value of 0.144 mm and a precision RMS value of 0.096 mm. There was no statistically significant difference in RMS values between SLS and SLA technologies regarding trueness. Regarding precision, however, the RMS values for SLS technology were significantly lower in the splint and cutting guide applications than those printed with SLA technology. Conclusions: Both 3D printing technologies produce modern models and applications with equally high dimensional accuracy. Considering current cost pressures experienced by hospitals, the lower-cost SLA 3D printer is a reliable choice for point-of-care 3D printing. Full article

Background/Objectives: Locating the mandibular foramen (MF) through imaging is clinically important for inferior alveolar nerve (IAN) anesthesia and mandibular ramus osteotomies. Although cone-beam computed tomography (CBCT) is superior in imaging the mandible, an orthopantomogram (OPG) is preferred for its ease of use and availability. Therefore, the present study aimed to evaluate the accuracy of digital OPG in localizing the MF, in a subset of the Middle Eastern population. Methods: Radiographic images (OPG and CBCT) of selected patients (adults, dentulous and no mandibular abnormalities) were used to locate the MF through digital measurements (mm) of the anteroposterior distance from the anterior border of the ramus (MF-AP) and the superoinferior position from the mandibular occlusal plane (MF-SI). Measurements were statistically compared between OPG and CBCT for accuracy. Differences in measurements between OPG and CBCT were compared against the anatomic location (right/left), age and biological sex, assuming a p-value < 0.05 as significant. Results: A total of 204 radiographic records (males: 100/females: 104/mean age: 34.65 ± 11.55 years) were evaluated. The measurements for the MF were MF-AP-OPG (right: 13.53 ± 2.44/left: 13.19 ± 2.25), MF-AP-CBCT (right: 13.61 ± 2.39/left: 13.36 ± 2.19), MF-SI-OPG (right: 5.25 ± 1.71/left: 5.41 ± 1.65) and MF-SI-CBCT (right: 5.59 ± 1.66/left: 5.52 ± 1.61). Measurements between OPG and CBCT were not significantly different, except for MF-SI (right) (p = 0.042). While the overall difference between OPG and CBCT (MF-AP/MF-SI) measurements showed a significant association (p < 0.01) with the anatomic location (right/left), a significant association (p < 0.05) with biological sex was observed only for MF-AP. Conclusions: Based on this study’s outcomes, digital OPG is an accurate modality to locate the MF based on anteroposterior (MF-AP) and superoinferior (MF-SI) measurements. This would be clinically beneficial for dental and oral surgeons to achieve the optimum IAN block anesthesia based on preoperative panoramic radiographs. Similarly, it would assist maxillofacial surgeons in planning mandibular orthognathic surgeries and ramus osteotomies without complications. Full article

Scaffolds are widely used devices for the treatment of osteochondral lesions of the talus (OCLT), aimed at enhancing mechanical stability and fostering chondrogenic differentiation. A systematic review and meta-analysis were performed to evaluate the safety, and clinical and radiological results of scaffolds for OCLT management. On 2 January 2024, a search was performed in four databases (PubMed, Embase, Web of Science, and Scopus), according to PRISMA guidelines. The risk of bias in the included studies was also evaluated. Thirty clinical studies were included in the qualitative analysis: 12 retrospective case series, 3 retrospective comparative studies, 9 prospective case series, 1 prospective comparative study, and 1 Randomized Controlled Trial (RCT). Natural scaffolds, such as bilayer collagen (COLL)I/III and hyaluronic scaffolds, were the most employed. Only minor adverse events were observed, even if more serious complications were shown, especially after medial malleolar osteotomy. An overall clinical and radiological improvement was observed after a mean of 36.3 months of follow-up. Patient age and Body Mass Index (BMI), lesion size, and location were correlated with the clinical outcomes, while meta-analysis revealed significant improvement in clinical scores with hyaluronic scaffolds compared to microfracture alone. This study highlights the safety and positive clinical outcomes associated with the use of scaffolds for OCLT. In the few available comparative studies, scaffolds have also demonstrated superior clinical outcomes compared to microfractures alone. Nevertheless, the analysis has shown the limitations of the current literature, characterized by an overall low quality and scarcity of RCTs. Full article

Background: This study aims to determine a generalized outcome and risk profile for patients undergoing orthognathic surgery for the definitive treatment of cleft lip and palate. Furthermore, we hope to determine the key risk factors that cause increased risk for cleft lip and palate patients undergoing orthognathic surgery. Methods: This study includes a systematic review using PubMed, MEDLINE, Cochrane, and Scopus. Data curation utilized Covidence software, with dual-reviewer screening and conflict resolution by a third party, focusing on publications with the full texts available. Results: The initial search yielded 1697 articles. Following title, abstract, and full-text screening, a total of 62 articles were included in this review. A total of 70.9% of included articles had moderate bias, with the rest having low risk of bias. The sample consisted of 2550 patients with an average age of about 20 years and an average follow-up of 16.8 months. The most employed procedure was Le Fort I osteotomy (99%). In terms of velopharyngeal function, there were notable increases in insufficiency and severity scores, with an average 63% worsening score from the baseline. That being said, patients experienced an average 33% improvement in speech articulation. Furthermore, the average horizontal movement was reported to be 6.09 mm with a subsequent relapse of 0.98 mm overall. Conclusions: This systematic review distills data from 62 articles and 2550 patients. It highlights the efficacy of orthognathic surgery in addressing oropharyngeal and aesthetic deficits. This study identifies relapse and velopharyngeal insufficiency as recurrent complications. These insights inform surgical refinement and patient counseling, laying a foundation for enhanced clinical protocols. Full article

Background and Objectives: This study aimed to evaluate the tibial tubercle–posterior intercondylar eminence (TT-IC) distance as a diagnostic tool and surgical guide for correcting extensor apparatus misalignment through tibial tubercle osteotomy. Materials and Methods: A retrospective analysis was conducted on patients with extensor apparatus misalignment. The TT-IC distance was measured using MRI. Patients underwent tibial tubercle osteotomy, guided by the TT-IC distance for correction. Post-operative outcomes, including alignment, pain scores, and functional recovery, were assessed. Results: A significant correlation was found between the TT-IC distance and the degree of extensor apparatus misalignment. Utilizing the TT-IC distance as a surgical guide led to improved alignment in majority of patients. Post-operative outcomes showed reduced pain and enhanced functional recovery. Conclusions: The study established the TT-IC measurement as a valuable tool for determining the need for tibial tuberosity osteotomy in patients with patellar instability, particularly those with trochlear dysplasia, by providing a more precise criterion than the traditional TT-TG distance. Full article

Background: In comparison to titanium screws, novel cortical bone allograft screws may come with advantages in osseointegration and with avoidance of potential material removal surgery after scarf osteotomy. Methods: A scarf osteotomy with allograft bone screws as fixation was performed in 21 patients (30 feet). Clinical and radiological parameters were prospectively collected until one year after surgery. A retrospective control group, consisting of 75 patients (82 feet) after scarf osteotomy using headless compression screws, was used to compare clinical outcomes. Results: After fixation with allograft bone screws, the mean preoperative AOFAS score increased from 51.5 points preoperatively to 93.5 points one year after surgery. In radiological assessments, a continuous osseointegration with the remodeling of the bone screw was observed in all patients that finished follow-up. However, four metatarsal fractures occurred early postoperatively after fixation using allograft bone screws. There were only three material removal surgeries in patients treated with headless compression screws. Conclusions: Allograft bone screws display a safe fixation and are a biological alternative for scarf osteotomy. Enough distance between the screw and the proximal osteotomy should be ensured to avoid fractures. Full article

Osseodensification enhances the stability of endosteal implants. However, pre-clinical studies utilizing osseodensification instrumentation do not account for the limited presence of trabeculae seen clinically. This study aimed to evaluate the effect of osseodensification instrumentation on osteotomy healing in scenarios with and without the presence of trabecular bone. A ~10 cm incision was made over the hip of twelve sheep. Trabecular bone was surgically removed from twelve sites (one site/animal; negative control (Neg. Ctrl)) and left intact at twelve sites (one site/animal; experimental group (Exp.)). All osteotomies were created using the osseodensification drilling protocol. Each osteotomy received an endosteal implant and was evaluated after 3 or 12 weeks of healing (n = 6 animals/time). Histology revealed increased woven and lamellar bone surrounding the implants in the Exp. group relative to the Neg. Ctrl group. The Exp. group demonstrated the presence of bone fragments, which acted as nucleating sites, thereby enhancing the bone formation and remodeling processes. Bone-to-implant contact (%BIC) and bone area fractional occupancy (%BAFO) were significantly higher in the Exp. group relative to the Neg. Ctrl group both at 3 weeks (p = 0.009 and p = 0.043) and 12 weeks (p = 0.010 and p = 0.008). Osseodensification instrumentation in the presence of trabecular bone significantly improved osseointegration. However, no negative influences such as necrosis, inflammation, microfractures, or dehiscence were observed in the absence/limited presence of trabeculae. Full article

This article presents a comprehensive overview of managing extra-articular and intra-articular distal radius malunions (DRM), discussing the pathoanatomy, clinical, and radiologic evaluation, conservative treatment, and surgical strategies. Corrective osteotomy remains the primary surgical intervention for symptomatic DRM. Surgical planning should consider factors such as timing, approach, correction technique, implant, graft, and associated injuries. The correction of extra-articular malunion necessitates brachioradialis tenotomy, circumferential periosteum release, and intrafocal elevation with grafting to facilitate distal radius realignment following osteotomy. Computer-assisted planning with 3D-printed patient-specific instrumentation (PSI) could help execute extra-articular osteotomy with high precision. As for the management of intra-articular malunion, it may require wrist arthrotomy, arthroscopy, or PSI assistance for precise articular osteotomy and reduction of the joint surface. This review highlights the importance of early intervention, thorough preoperative planning, and appropriate surgical techniques to optimize outcomes and minimize complications. Future research should focus on large-scale randomized controlled trials to compare different surgical methods, particularly for intra-articular DRM. Full article