Search Results (15,005)

Soil stoichiometry is essential for determining the ecological functioning of terrestrial ecosystems. Understanding the stoichiometric relationships in mixed forests could enhance our knowledge of nutrient cycling. In a mixed forest zone of Larix principis-rupprechtii (LP) and Betula Platyphylla (BP) in Hebei China, we conducted a study at six different sites with varying levels of tree species mixing. The proportion of L. principis-rupprechtii ranged from 0% to 100%, with intermediate values of 8.58%, 10.44%, 18.62%, and 38.32%. We compared soil stoichiometry, including carbon (C), nitrogen (N), and phosphorus (P), as well as chemical and physical properties across these sites. Piecewise structural equation modeling (piecewiseSEM) was used to assess the direct and indirect links between key ecosystem factors and their effects on soil stoichiometry. In mixed forests, the soil exhibited higher contents of soil organic matter (SOM), total nitrogen (TN), and total phosphorus (TP) compared to those in pure LP forests. Additionally, the soil C: N ratio in the 8.58% and 18.62% mixed forests as well as pure BP forests was significantly higher than that in LP forests. Structural equation modeling (SEM) revealed that the contents and ratios of soil C, N, and P exhibited different responses to mixed species proportions. The effect of mixed species proportions on soil nutrients was predominantly indirect, mediated primarily by variations in soil-available nutrients and, to a lesser extent, by physical properties and pH. Specifically, an increase in the proportion of LP in mixed forests had a direct negative effect on soil-available nutrients, which in turn had a positive effect on the content of SOM, TN, and TP and their respective ratios. Based on these findings, we can predict that soil nutrient limitation becomes more pronounced with increasing proportions of Larix principis-rupprechtii in the mixed forest. Our results emphasized the significance of changes in mixed species proportions on soil stoichiometry, providing valuable references for the sustainable development of forests. Full article

Hydrochar, an attractive member of the carbonaceous materials, is derived from biomass and projects great potential in peroxymonosulfate (PMS) activation, but has not been studied much. Herein, by using the large-scale cultured Chlorella vulgaris and field-collected bloom algae, a series of porous hydrochar was synthesized via a facile hydrothermal carbonization reaction, while Co doping significantly increased their specific surface areas, carbonization degree, and surface functional groups. These Co-doped hydrochar (xCo-HC, x: amount of the Co precursor) could efficiently activate the PMS, resulting in nearly 100% removal of five common paraben pollutants within 40 min. A dosage of 0.2Co-HC of 0.15 g/L, a PMS concentration of 0.6 g/L, and an unadjusted pH of 6.4 were verified more appropriately for paraben degradation. The coexistence of Cl⁻, SO₄²⁻, and humic acid inhibited the degradation, while HCO₃⁻ showed an enhancing effect. No observable change was found at the presence of NO₃⁻. Quenching results illustrated that the produced •SO₄⁻ during the conversion of doped Co³⁺/Co²⁺ acted as the dominant active species for paraben degradation, while •O₂⁻, ¹O₂, and •OH contributed relatively less. The algae-based hydrochar potentially facilitated the electron transfer in the xCo-HC/PMS system. Overall, this study develops a new strategy for resource utilization of the abundant algae. Full article

Machine learning approaches for pattern recognition are increasingly popular. However, the underlying algorithms are often not open source, may require substantial data for model training, and are not geared toward specific tasks. We used open-source software to build a green toad breeding call detection algorithm that will aid in field data analysis. We provide instructions on how to reproduce our approach for other animal sounds and research questions. Our approach using 34 green toad call sequences and 166 audio files without green toad sounds had an accuracy of 0.99 when split into training (70%) and testing (30%) datasets. The final algorithm was applied to amphibian sounds newly collected by citizen scientists. Our function used three categories: “Green toad(s) detected”, “No green toad(s) detected”, and “Double check”. Ninety percent of files containing green toad calls were classified as “Green toad(s) detected”, and the remaining 10% as “Double check”. Eighty-nine percent of files not containing green toad calls were classified as “No green toad(s) detected”, and the remaining 11% as “Double check”. Hence, none of the files were classified in the wrong category. We conclude that it is feasible for researchers to build their own efficient pattern recognition algorithm. Full article

This work presents a comprehensive model for lignocellulosic biomass pyrolysis, addressing kinetics, energy balances, and gas product composition with the aim of its application in wood combustion. The model consists of a two-stage global mechanism in which biomass initially reacts into tar, char, and light gases (non-condensable gases), which is followed by tar reacting into light gases and char. Experimental data from the literature are employed for determining Arrhenius kinetic parameters and key energy parameters, like tar and char heating values and the specific enthalpy of primary and secondary reactions. A methodology is introduced to derive correlations, allowing the model’s application to diverse biomass types. This work introduces several novel approaches. Firstly, a pyrolysis model that determines the composition of light gases by solving mass, species, and energy balances is developed, limiting the use of correlations from the literature only for tar and char elemental composition. The mass rate of light gases, tar, and char being produced is also determined. Secondly, kinetic parameters for primary and secondary reactions are determined following a Shafizadeh and Chin scheme but with a modified Arrhenius form dependent on $T^n$, significantly enhancing the accuracy of product composition prediction. Additionally, correlations for the enthalpies of reactions, both primary and secondary, are determined as a function of pyrolysis temperature. Primary reactions exhibit an overall endothermic behavior, while secondary reactions exhibit an overall exothermic behavior. Finally, the model is validated using cases reported in the literature, and results for light gases composition are presented. Full article

This literature review investigated the anti-inflammatory properties of brown algae, emphasizing their potential for dermatological applications. Due to the limitations and side effects associated with corticosteroids and immunomodulators, interest has been growing in harnessing therapeutic qualities from natural products as alternatives to traditional treatments for skin inflammation. This review explored the bioactive compounds in brown algae, specifically looking into two bioactive compounds, namely, fucoidans and phlorotannins, which are widely known to exhibit anti-inflammatory properties. This review synthesized the findings from various studies, highlighting how these compounds can mitigate inflammation by mechanisms such as reducing oxidative stress, inhibiting protein denaturation, modulating immune responses, and targeting inflammatory pathways, particularly in conditions like atopic dermatitis. The findings revealed species-specific variations influenced by the molecular weight and sulphate content. Challenges related to skin permeability were addressed, highlighting the potential of nanoformulations and penetration enhancers to improve delivery. While the in vivo results using animal models provided positive results, further clinical trials are necessary to confirm these outcomes in humans. This review concludes that brown algae hold substantial promise for developing new dermatological treatments and encourages further research to optimize extraction methods, understand the molecular mechanisms, and address practical challenges such as sustainability and regulatory compliance. This review contributes to the growing body of evidence supporting the integration of marine-derived compounds into therapeutic applications for inflammatory skin diseases. Full article

Various rapid propagation strategies have been discovered, which has facilitated large-scale plant reproduction and cultivar development. These methods, in many plant species, are used to rapidly generate large quantities (900 mini-tubers/m²) of high-quality propagule (free from contamination) at a relatively low cost in a small space. They are also used for plant preservation. This review article aims to provide potential applications for regeneration and clonal propagation. Plant propagation using advanced agrotechnology, such as aeroponics, is becoming increasingly popular among academics and industrialists. The advancement of asexual aeroponic propagation has been achieved through advancements in monitoring and control systems using IoT and smart sensor technology. New sensor technology systems have gained substantial interest in agriculture in recent years. It is used in agriculture to precisely arrange various operations and objectives while harnessing limited resources with minimal human intervention. Modern intelligent technologies and control systems simplify sensor data collection, making it more efficient than manual data collection, which can be slow and prone to errors. Specific ambient variables like temperature, humidity, light intensity, stock solution concentrations (nutrient water), EC (electrical conductivity), pH values, CO2 content, and atomization parameters (frequency and interval) are collected more effectively through these systems. The use of intelligent technologies provides complete control over the system. When combined with IoT, it aids in boosting crop quality and yield while also lowering production costs and providing data directly to tablets and smartphones in aeroponic propagation systems. It can potentially increase the system’s productivity and usefulness compared to the older manual monitoring and operating methods. Full article

Brassinosteroid (BR) signaling is regulated by BRI1-EMS SUPPRESSOR 1 (BES1) transcription factors, which are crucial for plant growth, development, and stress responses. Despite their importance, BES1 gene studies in Medicago sativa L. are limited, hindering our understanding of the BR signaling in this species. This study identified four BES1 genes in M. sativa; characterized their properties, conserved motifs, cis-regulatory elements, and chromosomal location; and explored their functions in development and stress responses. A phylogenetic analysis grouped these genes into two subfamilies. Transcript profiling showed widespread and tissue-specific expression patterns. A qRT-PCR analysis unveiled that most MsBESI genes were upregulated under salt and drought treatments, except MsG0280009980, which was suppressed. This research lays the groundwork for enhancing M. sativa stress resistance and understanding the BES1 gene family’s function. Full article

Wine production is one of the most important agricultural activities. The winemaking process generates a considerable volume of different residues characterized as by-products, such as pomace, seeds, stems, and skins. By-products are rich in polyphenols with antioxidant and antibacterial properties and may act as bacteriostatic or bactericidal agents against food-borne pathogens, improving food safety by enhancing antibiotic efficacy and reducing bacterial resistance. The aim of this study was to evaluate the phenolic composition and antioxidant activity of grape components (skins, seeds, and stems) from three red grape varieties (Periquita, Gamay, and Donzelinho Tinto) and determine their antibacterial activity against antibiotic-resistant bacteria, including Escherichia coli in food-producing animals and Listeria monocytogenes from food products and food-related environments. Ten phenolic compounds were quantified in these red grape varieties, with specific compounds found in different parts of the grape, including phenolic acids and flavonoids. Flavonoids are abundant in seeds and stems, malvidin-3-O-glucoside being the main anthocyanin in skins. The ethanolic extract from the seeds showed in vitro concentration-dependent activity against reactive species like ^•NO and O₂^•−. Gamay extract was the most effective, followed by Donzelinho Tinto and Periquita. Extracts showed varying antibacterial activity against Gram-positive and Gram-negative bacteria, with stronger effects on Gram-positive bacteria. L. monocytogenes was more susceptible, while E. coli was limited to three strains. Seeds exhibited the strongest antibacterial activity, followed by stems. The results of our study provide evidence of the potential of grape by-products, particularly seeds, as sources of bioactive compounds with antioxidant and antibacterial properties, offering promising avenues for enhancing food safety and combating antibiotic resistance in food production and related environments. Full article

Over the recent decades, an apparent worldwide rise in Harmful Algae Blooms (HABs) has been observed due to the growing exploitation of the coastal environment, the exponential growth of monitoring programs, and growing global maritime transport. HAB species like Alexandrium catenella—responsible for paralytic shellfish poisoning (PSP)—Protoceratium reticulatum, and Lingulaulax polyedra (yessotoxin producers) are a major public concern due to their negative socioeconomic impacts. The significant northward geographical expansion of A. catenella into more oceanic-influenced waters from the fjords where it is usually observed needs to be studied. Currently, their northern boundary reaches the 36°S in the Biobio region where sparse vegetative cells were recently observed in the water column. Here, we describe the environment of the Biobio submarine canyon using sediment and water column variables and propose how toxic resting cyst abundance and excystment are coupled with deep-water turbulence (10⁻⁷ Watt/kg) and intense diapycnal eddy diffusivity (10⁻⁴ m² s⁻¹) processes, which could trigger a mono or multi-specific harmful event. The presence of resting cysts may not constitute an imminent risk, with these resting cysts being subject to resuspension processes, but may represent a potent indicator of the adaptation of HAB species to new environments like the anoxic Biobio canyon. Full article

In the urban environment dust particles form a major part of air pollutants and can affect the physiological functions of the plant. Plants proved to be very powerful tools in as-sessing environmental pollution because of their wide distribution. Festuca ovina is a durable plant with specific habitat requirements, but there is no data on physiological response on traffic pollution. The purpose of the study was to measure impact of traffic pollution for Festuca ovina plant to different distance from the source of pollution (highway) basing on physiological markers and microscopical ob-servations. 3 hypoteses were formulated concerning the effect of distance from the source of pollution to the reaction of plants; difference of physiological reaction of leaves and roots to stress conditions; roots as a better indicator of urban pollutions. Current results suggest that Festuca ovina could serve as an effective plant marker for monitoring traffic pollution. The combination of high flavonoid production and reduced free proline concentration in leaves were observed and may suggests the potential tolerance of this plant species to traffic highway pollution. Ammonia content may be a good indicator or ROS accumulation in leaves and roots of plants according to the distance of the pollution source. Full article

Essential oils (EOs) have been gaining popularity in the past decades among researchers due to their potential to replace conventional chemicals used in the fight against pests, pathogenic and spoilage microbes, and oxidation processes. EOs are complex mixtures with many chemical components, the content of which depends on many factors—not just the plant genus, species, or subspecies, but also chemotype, locality, climatic conditions, phase of vegetation, method of extraction, and others. Due to this fact, there is still much to study, with antimicrobial effect being one of the key properties of EOs. There are many methods that have been frequently used by researchers for in vitro evaluation; however, although the research has been going on for decades, an internationally accepted standard is still missing. Most of methods are based on time-proven standards used for the testing of antibiotics. Due to the specific properties of EOs and their components, such as volatility and hydrophobicity, many modifications of these standard procedures have been adopted. The aim of this review is to describe the most common methods and their modifications for the testing of antimicrobial properties of EOs and to point out the most controversial variables which can potentially affect results of the assays. Full article

Three MnCeTiO_x catalysts with the same composition were prepared by conventional co-precipitation (MCT-C), reverse co-precipitation (MCT-R), and parallel co-precipitation (MCT-P), respectively, and their low-temperature SCR performance for de-NO_x was evaluated. The textural and structural properties, surface acidity, redox capacity, and reaction mechanism of the catalysts were investigated by a series of characterizations including N₂ adsorption and desorption, XRD, SEM, XPS, H₂-TPR, NH₃-TPD, NO-TPD, and in situ DRIFTs. The results revealed that the most excellent catalytic performance was achieved on MCT-R, and more than 90% NO_x conversion can be obtained at 100–300 °C under a high GHSV of 80,000 mL/(g_cat·H). Furthermore, MCT-R possessed optimal tolerance to H₂O and SO₂ poisoning. The excellent catalytic performance of MCT-R can be attributed to its larger BET specific surface area; higher contents of Mn⁴⁺, Ce³⁺, and adsorbed oxygen species; and more adsorption capacity for NH₃ and NO. Moreover, in situ DRIFTs results indicated that the NH₃-SCR reaction follows simultaneously the Langmuir–Hinshelwood and Eley–Rideal mechanisms at 100 °C. By adjusting the adding mode during the co-precipitation process, excellent low-temperature de-NO_x activity of MCT-R can be obtained simply and conveniently, which is of great practical value for the preparation of a MnCeTiO_x catalyst for denitrification. Full article

Characterization of fungal spider pathogens lags far behind their insect counterparts. In addition, little to nothing is known concerning the ecological reservoir and/or fungal entomopathogen community surrounding infection sites. Five infected spider cadavers were identified in the neo-tropical climate of north-central Florida, USA, from three of which viable cultures were obtained. Multi-locus molecular phylogenetic and morphological characterization identified one isolate as a new Gibellula species, here named, Gibellula floridensis, and the other isolates highly similar to Parengyodontium album. The fungal entomopathogen community surrounding infected spiders was sampled at different habitats/trophic levels, including soil, leaf litter, leaf, and twig, and analyzed using ITS amplicon sequencing. These data revealed broad but differential distribution of insect-pathogenic fungi between habitats and variation between sites, with members of genera belonging to Metarhizium and Metacordyceps from Clavicipitaceae, Purpureocillium and Polycephalomyces from Ophiocordyceps, and Akanthomyces and Simplicillium from Cordycipitaceae predominating. However, no sequences corresponding to Gibellula or Parengyodontium, even at the genera levels, could be detected. Potential explanations for these findings are discussed. These data highlight novel discovery of fungal spider pathogens and open the broader question regarding the environmental distribution and ecological niches of such host-specific pathogens. Full article

Zinc oxide nanoparticles (NPs) are used in a wide range of consumer products and in biomedical applications, resulting in an increased production of these materials with potential for exposure, thus causing human health concerns. Although there are many reports on the size-related toxicity of ZnO NPs, the toxicity of different nanoforms of this chemical, toxicity mechanisms, and potency determinants need clarification to support health risk characterization. A set of well-characterized ZnO nanoforms (e.g., uncoated ca. 30, 45, and 53 nm; coated with silicon oil, stearic acid, and (3-aminopropyl) triethoxysilane) were screened for in vitro cytotoxicity in two cell types, human lung epithelial cells (A549), and mouse monocyte/macrophage (J774) cells. ZnO (bulk) and ZnCl₂ served as reference particles. Cytotoxicity was examined 24 h post-exposure by measuring CTB (viability), ATP (energy metabolism), and %LDH released (membrane integrity). Cellular oxidative stress (GSH-GSSG) and secreted proteins (targeted multiplex assay) were analyzed. Zinc oxide nanoform type-, dose-, and cell type-specific cytotoxic responses were seen, along with cellular oxidative stress. Cell-secreted protein profiles suggested ZnO NP exposure-related perturbations in signaling pathways relevant to inflammation/cell injury and corresponding biological processes, namely reactive oxygen species generation and apoptosis/necrosis, for some nanoforms, consistent with cellular oxidative stress and ATP status. The size, surface area, agglomeration state and metal contents of these ZnO nanoforms appeared to be physicochemical determinants of particle potencies. These findings warrant further research on high-content “OMICs” to validate and resolve toxicity pathways related to exposure to nanoforms to advance health risk-assessment efforts and to inform on safer materials. Full article

Wild fruit species offer significant nutritional, environmental, and economic benefits. Among them, Prunus cerasifera Ehrh. (myrobalan) stands out for its resilience and nutrient-rich fruits, traditionally consumed fresh or dried. This study aimed to assess the morphological and biochemical diversity of 21 wild P. cerasifera accessions from Slovenia, focusing on 18 fruit and stone traits, including size, shape, color, and phenolic compounds such as total monomeric anthocyanins and total phenolic content (TPC). The objective was to identify genotypes with potential for cultivation and food production or as parental components in breeding programs. The results showed variability in fruit length (2.19–2.82 cm), width (2.18–2.99 cm), weight (67.98–150.30 g), firmness, and juiciness, with notable differences in stone characteristics. Phytochemical analysis revealed a wide range of TPC (277–1756 mg/100 g) and anthocyanin levels (0–710 mg/100 g), with higher concentrations in darker fruits. Statistical analysis compared PAM and AGNES clustering methods, finding that PAM with five clusters and AGNES with two clusters provided similar insights. The study emphasized variability in morphological and chemical traits among clusters, with specific accessions showing particularly valuable traits, such as accession RK13, which had high TPC and anthocyanins and a non-adherent stone. Full article