Search Results (7,946)

Magnesium fertilization positively impacts various physiological processes in plants, leading to increased yield and fruit quality. In the present study, we determined the effects of the foliar application of magnesium on the yield, fruit quality, fruit biochemical content, and enzyme activity of tomato plants. The study was performed in a plastic greenhouse. The study evaluated magnesium sulfate application through drip irrigation at a single dose of 0.005 kg m² and foliar application at rates of 0%, 0.25%, 0.5%, and 0.75%. As a consequence, the highest average fruit weight was obtained with the foliar application of 0.50% Mg. In terms of the fruit color’s a* value, the best results were again obtained with the application of 0.50% Mg. Mg applications proportionally increased the leaf chlorophyll content. Similarly, the highest leaf Mg content, the leaf relative water content, the fruits’ malic acid content, and the best fruit juice pH value were determined with the application of 0.75%. On the other hand, the application of 0.25% Mg produced the best results on the leaves’ K, Ca, and Na content, as well as in the fruits’ ascorbic acid content. Significant differences were not found in terms of the effects of the treatments on antioxidant activity, total protein amount, and enzyme activity. The application of 0.50% Mg contributed to the fruit color; 0.75% Mg application contributed to the chlorophyll, pH, and malic acid content; and the application of 0.25% Mg contributed to an increase in ascorbic acid. In conclusion, for greenhouse tomato production, a foliar application of 0.50% Mg is recommended to achieve larger, red-colored fruits. A 0.75% Mg application is suggested for increasing the chlorophyll content, lowering fruit juice pH, and enhancing malic acid content in fruits. A 0.25% Mg application is recommended to increase ascorbic acid content in fruits. Full article

Submicron and nanosized powders have gained significant attention in recent decades due to their broad applicability in various fields. This work focuses on ultrasonic spray pyrolysis, an efficient and flexible method that employs an aerosol process to synthesize titanium-based nanoparticles by transforming titanium oxy-sulfate. Various parameters are monitored to better optimize the process and obtain better results. Taking that into account, the influence of temperature on the transformation of titanium oxy-sulfate was monitored between 700 and 1000 °C. In addition to the temperature, the concentration of the starting solution was also changed, and the flow of hydrogen and argon was studied. The obtained titanium-based powders had spherical morphology with different particle sizes, from nanometer to submicron, depending on the influence of reaction parameters. The control of the oxygen content during synthesis is significant in determining the structure of the final powder. Full article

A water-soluble ternary copolymer bearing carboxyl, sulfonic, and amide functional groups was synthesized using ammonium persulfate-catalyzed free radical polymerization in water, resulting in high monomer conversion. This copolymer was then complexed with aluminum sulfate, forming an admixture containing Al(SO₄)(OH)·5H₂O, which was subsequently combined with silica gel. Characterization revealed that the synthesized copolymer formed a large, thin membrane that covered both the aluminum compounds and the silica gel blocks. The introduction of this complex admixture, combining the copolymer and aluminum sulfate, not only reduced the setting times of the cement paste but also enhanced the mechanical strengths of the mortar compared to using aluminum sulfate alone. The complex admixture led to the formation of katoite, metajennite, and C₃A (tricalcium aluminate) in the mortar, demonstrating significant linking effects, whereas pure aluminum sulfate could not completely transform C₃S within 24 h. Further addition of silica gel to the complex admixture further shortened the setting times of the paste, slightly reduced compressive strength, but improved flexural strength compared to the initial complex admixture. The silicon components appeared to fill the micropores and mesopores of the mortar, accelerating cement setting and enhancing flexural strength, while slightly decreasing compressive strength. This study contributed to the development of new cementing accelerators with improved hardening properties. Full article

Fucosylated chondroitin sulfate (FCS) was prepared from Bohadschia ocellata using protease hydrolysis. The structural characteristics of FCS were confirmed through chemical composition analysis using FTIR spectroscopy, ¹H NMR, and ¹³C NMR. FCS from B. ocellata (FCS-Bo) exhibited an average molecular weight of approximately 122 kDa. The biological activities of FCS-Bo, including anticoagulant, anti-cancer, and Protein Tyrosine Phosphatase 1B (PTP1B) inhibition, were evaluated. FCS-Bo displayed potent anticoagulant properties, markedly extending activated partial thromboplastin time, prothrombin time, and thrombin time when compared to the heparin control. In anti-cancer bioactivity research, FCS-Bo efficiently inhibited colony formation in the colon cancer cell lines HCT-116, HT-29, and DLD-1, achieving inhibition rates of up to 65%. Additionally, FCS-Bo exhibited significant inhibition of PTP1B, with an IC₅₀ as low as 0.0326 µg/mL, suggesting its potential for improving insulin sensitivity and managing conditions such as type 2 diabetes and obesity. Full article

Rifaximin and rifampicin are good broad-spectrum antimicrobials. The irrational use of antimicrobial drugs in veterinary clinics could threaten public health and food safety. It is necessary to develop a reliable detection method of the residue for enhancing the rational supervision of the use of such drugs, reducing and slowing down the generation of bacterial resistance, and promoting animal food safety and human health. So, this study developed an LC-MS/MS method for the detection of rifaximin and rifampicin residues in animal-origin foods. The residual rifaximin and rifampicin of homogenized test materials were extracted with acetonitrile-dichloromethane solution or acetonitrile in the presence of anhydrous sodium sulfate and vitamin C, purified by dispersible solid phase extraction, determined by LC-MS/MS, and quantified by the internal standard method. The specificity, sensitivity, matrix effect, accuracy, and precision of the method were investigated in the edible tissues of cattle, swine, or chicken. In addition, the stability of the standard stock solution and the standard working solution was also investigated. The method was suitable for the muscle, liver, kidney, fat, milk, and eggs of cattle, swine, or chicken, as well as fish and shrimp. The specificity of the method was good, and the detection of the analytes was not affected by different matrices. Both the LOD and LOQ of the two analytes were 5 μg/kg and 10 μg/kg, respectively. The results of matrix effects in each tissue were in the range of 80–120%; there were no significant matrix effects. The average accuracy of rifaximin and rifampicin in different foodstuffs of animal origin was between 80% and 120%, and the method precision was below 20% (RSD). The proposed method showed good performance for determination, which could be employed for the extraction, purification, and detection of residual rifaximin and rifampicin in edible animal tissues. The pretreatment procedure of tissue samples was simple and feasible. The method was highly specific, stable, reliable, and with high sensitivity, accuracy, and precision, which met the requirements of quantitative detection of veterinary drug residues. Full article

Chronic kidney disease (CKD) is a very prevalent and insidious disease, particularly with initially poorly manifested symptoms that progressively culminate in the manifestation of an advanced stage of the condition. The gradual impairment of kidney function, particularly decreased filtration capacity, results in the retention of uremic toxins and affects numerous molecular mechanisms within the body. The dysbiotic intestinal microbiome plays a crucial role in the accumulation of protein-bound uremic toxins such as p-cresol (pC), indoxyl sulfate (IS), and p-cresyl sulfate (p-CS) through the ongoing fermentation process. The described phenomenon leads to an elevated level of oxidative stress and inflammation, subsequently resulting in tissue damage and complications, particularly an increase in cardiovascular risk, representing the predominant cause of mortality in chronic kidney disease (CKD). Therefore, exploring methods to reduce uremic toxins is currently a pivotal therapeutic strategy aimed at reducing the risk of organ damage in patients with chronic kidney disease (CKD). This review aims to summarize recent discoveries on modifying the composition of the intestinal microbiota through the introduction of special probiotic and synbiotic supplements for CKD therapy. The potential to connect the gut microbiota with CKD opens the possibility for further extensive research in this area, which could lead to the incorporation of synbiotics and probiotics into the fundamental treatment and prevention of CKD. Full article

Nano- and micro-sized vesicular and colloidal structures mediate cell–cell communication. They are important players in the physiology of plants, animals, and humans, and are a subject of increasing interest. We investigated the effect of three surfactants, N-cetylpyridinium chloride (CPC), sodium dodecyl sulfate (SDS), and Triton X-100 (TX100), and two anionic polyelectrolytes, sodium polystyrene sulfonate (NaPSS) and sodium polymethacrylate (NaPMA), on nanoliposomes. In addition, the effect of SDS and TX100 on selected biological membranes (erythrocytes and microalgae) was investigated. The liposomes were produced by extrusion and evaluated by microcalorimetry and light scattering, based on the total intensity of the scattered light (I_tot), hydrodynamic radius (R_h), radius of gyration (R_g), shape parameter p (=R_h/R_g,0), and polydispersity index. The EPs shed from erythrocytes and microalgae Dunaliella tertiolecta and Phaeodactylum tricornutum were visualized by scanning electron microscopy (SEM) and analyzed by flow cytometry (FCM). The R_h and I_tot values in POPC liposome suspensions with added CPC, SDS, and TX100 were roughly constant up to the respective critical micelle concentrations (CMCs) of the surfactants. At higher compound concentrations, I_tot dropped towards zero, whereas R_h increased to values higher than in pure POPC suspensions (R_h ≈ 60–70 nm), indicating the disintegration of liposomes and formation of larger particles, i.e., various POPC–S aggregates. Nanoliposomes were stable upon the addition of NaPSS and NaPMA, as indicated by the constant R_h and I_tot values. The interaction of CPC, SDS, or TX100 with liposomes was exothermic, while there were no measurable heat effects with NaPSS or NaPMA. The SDS and TX100 increased the number density of EPs several-fold in erythrocyte suspensions and up to 30-fold in the conditioned media of Dunaliella tertiolecta at the expense of the number density of cells, which decreased to less than 5% in erythrocytes and several-fold in Dunaliella tertiolecta. The SDS and TX100 did not affect the number density of the microalgae Phaeodactylum tricornutum, while the number density of EPs was lower in the conditioned media than in the control, but increased several-fold in a concentration-dependent manner. Our results indicate that amphiphilic molecules need to be organized in nanosized particles to match the local curvature of the membrane for facilitated uptake. To pursue this hypothesis, other surfactants and biological membranes should be studied in the future for more general conclusions. Full article

Groundwater salinization poses a critical threat to sustainable development in arid and semi-arid rurbanizing regions, exemplified by Kerman Province, Iran. This region experiences groundwater ecosystem degradation as a result of the rapid conversion of rural agricultural land to urban areas under chronic drought conditions. This study aims to enhance Groundwater Pollution Risk (GwPR) mapping by integrating the DRASTIC index with machine learning (ML) models, including Random Forest (RF), Boosted Regression Trees (BRT), Generalized Linear Model (GLM), Support Vector Machine (SVM), and Multivariate Adaptive Regression Splines (MARS), alongside hydrogeochemical investigations, to promote sustainable water management in Kerman Province. The RF model achieved the highest accuracy with an Area Under the Curve (AUC) of 0.995 in predicting GwPR, outperforming BRT (0.988), SVM (0.977), MARS (0.951), and GLM (0.887). The RF-based map identified new high-vulnerability zones in the northeast and northwest and showed an expanded moderate vulnerability zone, covering 48.46% of the study area. Analysis revealed exceedances of WHO standards for total hardness (TH), sodium, sulfates, chlorides, and electrical conductivity (EC) in these high-vulnerability areas, indicating contamination from mineralized aquifers and unsustainable agricultural practices. The findings underscore the RF model’s effectiveness in groundwater prediction and highlight the need for stricter monitoring and management, including regulating groundwater extraction and improving water use efficiency in riverine aquifers. Full article

Staphylococcus aureus (S. aureus) is the leading cause of surgical site infections (SSIs) and is capable of biofilm growth on implanted foreign devices. The use of surgical irrigation solutions has become a common strategy to combat bacterial contamination events that occur during surgery. Despite their antimicrobial activity, SSI rates remain consistent, suggesting that low-level contamination persists. In these cases, circulating neutrophils must traffic from the blood to contamination sites to aid in bacterial clearance. The influence of irrigation solutions on neutrophils’ ability to engage with bacteria has not been explored. The effects of three commonly used irrigation solutions: Xperience (sodium lauryl sulfate), Irrisept (chlorhexidine gluconate), and Betadine^® (povidone-iodine) on nascent S. aureus biofilms alone and in the presence of human neutrophils were assessed at manufactured and diluted concentrations. All three solutions, at a 10% dilution, inhibited bacterial growth as demonstrated by culture assays and confocal video microscopy of bacterial aggregate formation. The effects of 10% dilutions of each of these solutions on neutrophil membrane integrity (by flow cytometry and propidium iodide staining) and motility (by confocal video microscopy of neutrophil track length) were investigated with differing outcomes for each irrigation solution. At this concentration only Irrisept preserved neutrophil membrane integrity and motility. Together, this study examines an overlooked aspect of surgical irrigation solutions by investigating their impact on innate immunity and highlights the feasibility of formulations wherein solution effectiveness is complemented by neutrophil function to reduce risks of infection. Full article

This study evaluates the impact of the addition of nanoparticles of anodic manganese dioxide (NAMD) on the mechanical properties and resistance to chemical attack of concrete. The research focused on nine concrete mixtures with water/cement ratios of 0.40, 0.45, and 0.50 and NAMD contents of 0, 5, and 10%. The properties of NAMD were analyzed, and fresh concrete properties such as temperature, unit weight, and consistency were measured. The compressive strength was determined at different ages (7, 14, 28, 56, and 90 days). The tensile and flexural strength were evaluated at 28 days, and the longitudinal change generated by the SO₄Mg attack was monitored until 90 days. In addition, an accelerated carbonation test was performed on concrete samples with 28 days of curing exposed to an atmosphere of 6% CO₂ for one week. The addition of NAMD did not significantly affect the temperature or unit weight of the fresh concrete, but it did influence the consistency. An increase in compressive, tensile, and flexural strength was observed, especially at early ages and for low w/c ratios. The addition of NAMD reduced the expansion of concrete exposed to magnesium sulfate, with 5% being the most effective dose, and reduced the carbonation rate of concrete by up to 40% in mixes with w/c ratios of 0.40 and 0.50. It was shown that the addition of 5% as an effective dose of NAMD improves the mechanical and durability properties of concrete, especially in mixtures with a low water/cement ratio, contributing to the improvement of the quality and strength of concrete. Full article

In the present study, the evolution of free water content in five different alkali-activated slag (AAS) systems was continuously monitored and compared using ¹H low-field NMR. The alkali activators used were waterglass solutions with three different moduli (1.2, 1.4, and 1.6), sodium hydroxide solution, and sodium sulfate solution. The findings reveal that the type of activator significantly affected the dynamic changes in the relative free water content. Notably, an increase in free water content was observed in the early stages of hydration of all AAS systems except for those activated by sodium sulfate solution. Additionally, this study investigated the relationship between changes in free water content and hydration heat in the AAS systems, dividing the initial 24 h of AAS hydration into three stages. The results demonstrate that free water can serve as an effective probe for monitoring the hydration process in fresh AAS pastes, offering valuable insights alongside traditional thermal signals. Full article

Seaweed polysaccharides are versatile both in their functions in seaweed physiology and in their practical applications in society. However, their content and quality vary greatly. This review discusses the main factors that influence the yield and quality of polysaccharides, specifically carrageenans and agars (sulfated galactans) found in red algae species (Rhodophyta). In addition, its historical, current, and emerging applications are also discussed. Carrageenan has been influenced mainly by photosynthetically active radiation (PAR) and nitrogen, while its relationship with temperature has not yet been replicated by recent studies. Agar’s seasonal trend has also been found to be more ambiguous than stated before, with light, temperature, nutrients, and pH being influencing factors. In this review, it is also shown that, depending on the compound type, seaweed polysaccharides are influenced by very different key factors, which can be crucial in seaweed aquaculture to promote a high yield and quality of polysaccharides. Additionally, factors like the extraction method and storage of polysaccharides also influence the yield and quality of these compounds. This review also highlights the drawbacks and inadequacy inherent from the conventional (or current) extraction technology approaches. Full article

Polysaccharides from cyanobacteria are extensively reported for their complex structures, good biocompatibility, and diverse bioactivities, but only a few cyanobacterial species have been exploited for the biotechnological production of polysaccharides. According to our previous study, the newly isolated marine cyanobacterium Cyanobacterium aponinum SCSIO-45682 was a good candidate for polysaccharide production. This work provided a systematic study of the extraction optimization, isolation, structural characterization, and bioactivity evaluation of polysaccharides from C. aponinum SCSIO-45682. Results showed that the crude polysaccharide yield of C. aponinum reached 17.02% by hot water extraction. The crude polysaccharides showed a porous and fibrous structure, as well as good moisture absorption and retention capacities comparable to that of sodium alginate. A homogeneous polysaccharide (Cyanobacterium aponinum polysaccharide, CAP) was obtained after cellulose DEAE-52 column and Sephadex G-100 column purification. CAP possessed a high molecular weight of 4596.64 kDa. It was mainly composed of fucose, galactose, and galacturonic acid, with a molar ratio of 15.27:11.39:8.64. The uronic acid content and sulfate content of CAP was 12.96% and 18.06%, respectively. Furthermore, CAP showed an in vitro growth inhibition effect on human hepatocellular carcinoma (HepG2) cells. The above results indicated the potential of polysaccharides from the marine cyanobacterium C. aponinum SCSIO-45682 as a moisturizer and anticancer addictive applied in cosmetical and pharmaceutical industries. Full article

Background: Propolis possesses many bioactive compounds that could modulate the gut microbiota and reduce the production of uremic toxins in patients with chronic kidney disease (CKD) undergoing hemodialysis (HD). This clinical trial aimed to evaluate the effects of propolis on the gut microbiota profile and uremic toxin plasma levels in HD patients. These are secondary analyses from a previous double-blind, randomized clinical study, with 42 patients divided into two groups: the placebo and propolis group received 400 mg of green propolis extract/day for eight weeks. Indole-3 acetic acid (IAA), indoxyl sulfate (IS), and p-cresyl sulfate (p-CS) plasma levels were evaluated by reversed-phase liquid chromatography, and cytokines were investigated using the multiplex assay (Bio-Plex Magpix^®). The fecal microbiota composition was analyzed in a subgroup of patients (n = 6) using a commercial kit for fecal DNA extraction. The V4 region of the 16S rRNA gene was then amplified by the polymerase chain reaction (PCR) using short-read sequencing on the Illumina NovaSeq PE250 platform in a subgroup. Forty-one patients completed the study, 20 in the placebo group and 21 in the propolis group. There was a positive correlation between IAA and TNF-α (r = 0.53, p = 0.01), IL-2 (r = 0.66, p = 0.002), and between pCS and IL-7 (r = 0.46, p = 0.04) at the baseline. No significant changes were observed in the values of uremic toxins after the intervention. Despite not being significant, microbial evenness and observed richness increased following the propolis intervention. Counts of the Fusobacteria species showed a positive correlation with IS, while counts of Firmicutes, Lentisphaerae, and Proteobacteria phyla were negatively correlated with IS. Two months of propolis supplementation did not reduce the plasma levels of uremic toxins (IAA, IS, and p-CS) or change the fecal microbiota. Full article

Immunotherapies, including checkpoint inhibitor antibodies, have precipitated significant improvements in clinical outcomes for melanoma. However, approximately half of patients do not benefit from approved treatments. Additionally, apart from Tebentafusp, which is approved for the treatment of uveal melanoma, there is a lack of immunotherapies directly focused on melanoma cells. This is partly due to few available targets, especially those expressed on the cancer cell surface. Chondroitin sulfate proteoglycan 4 (CSPG4) is a cell surface molecule overexpressed in human melanoma, with restricted distribution and low expression in non-malignant tissues and involved in several cancer-promoting and dissemination pathways. Here, we summarize the current understanding of the expression and functional significance of CSPG4 in health and melanoma, and we outline immunotherapeutic strategies. These include monoclonal antibodies, antibody–drug conjugates (ADCs), chimeric-antigen receptor (CAR) T cells, and other strategies such as anti-idiotypic and mimotope vaccines to raise immune responses against CSPG4-expressing melanomas. Several showed promising functions in preclinical models of melanoma, yet few have reached clinical testing, and none are approved for therapeutic use. Obstacles preventing that progress include limited knowledge of CSPG4 function in human cancer and a lack of in vivo models that adequately represent patient immune responses and human melanoma biology. Despite several challenges, immunotherapy directed to CSPG4-expressing melanoma harbors significant potential to transform the treatment landscape. Full article