Search Results (268)

The current trend in food innovations includes developing products containing plant ingredients or extracts rich in bioactive compounds. This study aimed to prepare and characterize skimmed thermally treated goat’s milk powders enriched with lyophilized fruit extracts of Lycium ruthenicum Murray (GMLR) and Lycium barbarum L. (GMLB). Proximate analysis, ultra-high performance liquid chromatography with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS), Fourier transform infrared spectroscopy using attenuated total reflection (FTIR-ATR), and electrophoretic analysis were assessed. Total phenolic content (TPC), total protein content, and antioxidant properties of enriched goat milk powders were determined spectrophotometrically, and prebiotic potential was evaluated by the broth microdilution method. A total of 25 phenolic compounds and 18 phenylamides were detected in the enriched goat milk powders. Electrophoretic analysis showed the absence of proteolysis in the prepared powders. The GMLR showed the highest TPC and displayed a ferric ion-reducing power, probably contributed by anthocyanins and some phenylamides. GMLR and GMLB had higher ABTS radical scavenging activity but lower ferrous ion-chelating capacity than control goat′s milk powder. GMLB and GMLR in a dose-dependent manner (0.3–5 mg/mL) showed a growth-promoting effect on probiotic strains. In summary, prepared goji/goat milk powders, primarily GMLR, might be used as prebiotic supplements or functional food additives. Full article

Neutrinoless double beta decay ($0\nu \beta \beta$) provides a way to probe physics beyond the Standard Model of particle physics. The upcoming nEXO experiment will search for $0\nu \beta \beta$ decay in ¹³⁶Xe with a projected half-life sensitivity exceeding ${10}^{28}$ years at the 90% confidence level using a liquid xenon (LXe) Time Projection Chamber (TPC) filled with 5 tonnes of Xe enriched to ∼90% in the $\beta \beta$-decaying isotope ¹³⁶Xe. In parallel, a potential future upgrade to nEXO is being investigated with the aim to further suppress radioactive backgrounds and to confirm $\beta \beta$-decay events. This technique, known as Ba-tagging, comprises extracting and identifying the $\beta \beta$-decay daughter ¹³⁶Ba ion. One tagging approach being pursued involves extracting a small volume of LXe in the vicinity of a potential $\beta \beta$-decay using a capillary tube and facilitating a liquid-to-gas phase transition by heating the capillary exit. The Ba ion is then separated from the accompanying Xe gas using a radio-frequency (RF) carpet and RF funnel, conclusively identifying the ion as ¹³⁶Ba via laser-fluorescence spectroscopy and mass spectrometry. Simultaneously, an accelerator-driven Ba ion source is being developed to validate and optimize this technique. The motivation for the project, the development of the different aspects, along with the current status and results, are discussed here. Full article

The promotion of natural beauty has empowered women with textured hair to embrace their natural hair texture and opt for bleaching as a means of style variation. However, bleaching exacerbates the inherent fragility of this hair type, necessitating treatments to partially restore its mechanical properties. Vegetable oils, renowned for their strengthening properties, were evaluated regarding (I) their ability to penetrate both virgin and bleached textured hair using Matrix-Assisted Laser Desorption Ionization (MALDI) time-of-flight (TOF) analysis, and (II) their effects by way of tensile and fatigue tests. The MALDI–TOF results revealed groups of oil molecules in the cortical region of the bleached textured hair. The tensile test results, in turn, showed that the oil treatments were unable to alter the mechanical properties of the hair. Conversely, the fatigue test showed an increase in resistance in the virgin hair, most likely attributed to a lubrication effect in the outermost portions of the cortex and cuticles. In the bleached hair, a reduction in resistance was noted following the treatment with the oils. Comparative analysis with a previous study on straight hair by our group suggests that external molecules diffuse more homogeneously in straight hair than in textured hair. The unique cortical structure of textured hair creates two areas with distinct diffusion zones, resulting in the irregular distribution of external materials and different effects compared to straight hair. Full article

We have designed and built an improved system for combined Time-Domain Near-Infrared Spectroscopy (TD NIRS) and Diffuse Correlation Spectroscopy (DCS) measurements. The system features two independent channels, enabling TD NIRS and DCS acquisition at short and long source-detector distances to enhance depth sensitivity in layered tissues. Moreover, the device can operate at fast acquisition rates (up to 50 Hz) to monitor hemodynamic oscillations in biological tissues. An OEM (Original Equipment Manufacturer) TD NIRS device enables stable and robust acquisition of photon distribution of time-of-flight. For the DCS signals, the use of a time tagger and a software correlator allows us flexibility in post-processing. A user-friendly GUI controls TD NIRS data acquisition and online data analysis. We present results for the system characterization on calibrated tissue phantoms according to standardized protocols for performance assessment of TD NIRS and DCS devices. In-vivo measurements during rest and during vascular occlusions are also reported to validate the system in real settings. Full article

Recent clinical outbreaks of infectious diseases caused by pathogenic microorganisms, such as viruses, bacteria, and fungi, along with the emergence of unwanted microorganisms in industrial settings, have significantly reduced efficiency. Graphene has recently attracted significant attention as a potential antimicrobial agent because of its low toxicity, ease of production and functionalization, and high solubility in water. The presence of oxygen functional groups allows the interaction of the compound with bacteria and other biomolecules, making it an interesting candidate for antimicrobial therapy. Moreover, integrating graphene into copper coatings has been shown to enhance their antimicrobial properties. However, the implementation of copper–graphene composite coatings is currently limited by the difficulty of uniformly distributing graphene within the copper matrix. Copper (Cu)-doped graphitic nanoplatelets (CuGnPs), one option to overcome this challenge, are made via a mechanochemical reaction between solid graphite and Cu powder. The configuration of C–Cu bonds within CuGnPs can be identified using a range of analytical techniques, including transmission electron microscopy, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and time-of-flight secondary ion mass spectrometry. To evaluate the antibacterial activity of the Cu-GnPs, we employed Escherichia coli or Staphylococcus aureus. Various amounts (250, 500, 750, and 1000 μg/mL) of prepared CuGnP samples were incubated in a bacterial suspension for 3 or 6 h at 150 rpm and 37 °C for a colony-forming unit assay. Three hours and six hours of treatment of the bacteria with CuGnPs led to a significant difference in bacterial survival compared with that of the control. It was observed that CuGnPs, with copper bound to graphene oxide, more effectively inhibited the proliferation of E. coli compared with nanoplatelets containing graphene oxide alone. These findings suggest that the unique properties of CuGnPs, such as C–Cu bonds, high surface area, and the coexistence of micropores and mesopores, are valuable for exerting strong antimicrobial effects making CuGnPs effective at preventing bacterial colonization on industrial surfaces. Full article

Community drinking water sources are increasingly contaminated by various point and non-point sources, with emerging organic contaminants and microbial strains posing health risks and disrupting ecosystems. This study explores the use of zinc oxide nanoparticles (ZnO-NPs) as a non-specific agent to address groundwater contamination and combat microbial resistance effectively. The ZnO-NPs were synthesized via a green chemistry approach, employing a sol-gel method with lemon peel aqueous extract. The catalyst was characterized using techniques including XRD, ATR-FTIR, SEM-EDAX, UV-DRS, BET, and Raman spectroscopy. ZnO-NPs were then tested for photodegradation of quinoline yellow dye (QY) under sunlight irradiation, as well as for their antibacterial and antioxidant properties. The ZnO-NP photocatalyst showed significant photoactivity, attributed to effective separation of photogenerated charge carriers. The efficiency of sunlight dye photodegradation was influenced by catalyst dosage (0.1–0.6 mg L⁻¹), pH (3–11), and initial QY concentration (10–50 mg L⁻¹). The study developed a first-order kinetic model for ZnO-NPs using the Langmuir–Hinshelwood equation, yielding kinetic constants of equilibrium adsorption and photodegradation of Kc = 6.632 × 10⁻² L mg⁻¹ and kH = 7.104 × 10⁻² mg L⁻¹ min⁻¹, respectively. The results showed that ZnO-NPs were effective against Gram-positive bacterial strains and showed moderate antioxidant activity, suggesting their potential in wastewater disinfection to achieve sustainable development goals. A potential antibacterial mechanism of ZnO-NPs involving interactions with microbial cells is proposed. Additionally, Gaussian Process Regression (GPR) combined with an improved Lévy flight distribution (FDB-LFD) algorithm was used to model QY photodegradation by ZnO-NPs. The ARD-Exponential kernel function provided high accuracy, validated through residue analysis. Finally, an innovative MATLAB-based application was developed to integrate the GPR_FDB-LFD model and FDB-LFD algorithm, streamlining optimization for precise photodegradation rate predictions. The results obtained in this study show that the GPR and FDB-LFD approaches offer efficient and cost-effective methods for predicting dye photodegradation, saving both time and resources. Full article

The precise monitoring of chemical reactions in plasma-based processes is crucial for advanced semiconductor manufacturing. This study integrates three diagnostic techniques—Optical Emission Spectroscopy (OES), Quadrupole Mass Spectrometry (QMS), and Time-of-Flight Mass Spectrometry (ToF-MS)—into a reactive ion etcher (RIE) system to analyze CF₄-based plasma. To synchronize and integrate data from these different domains, we developed a Tri-CycleGAN model that utilizes three interconnected CycleGANs for bi-directional data transformation between OES, QMS, and ToF-MS. This configuration enables accurate mapping of data across domains, effectively compensating for the blind spots of individual diagnostic techniques. The model incorporates self-attention mechanisms to address temporal misalignments and a direct loss function to preserve fine-grained features, further enhancing data accuracy. Experimental results show that the Tri-CycleGAN model achieves high consistency in reconstructing plasma measurement data under various conditions. The model’s ability to fuse multi-domain diagnostic data offers a robust solution for plasma monitoring, potentially improving precision, yield, and process control in semiconductor manufacturing. This work lays a foundation for future applications of machine learning-based diagnostic integration in complex plasma environments. Full article

Heel marks (HMs) are a type of dirt stain consisting of polyester-based urethane rubber on polyvinyl chloride (PVC) floor surfaces. The rapid removal of HMs was achieved by using non-thermal atmospheric-pressure plasma technology. Mimetic HMs were prepared by coating PVC floor samples with HMs to a thickness of 13.9 μm. The removal area, thickness, and volume were measured after applying spark discharges at high voltage and a repetition rate of 50 kHz. The treated surfaces were analyzed by using X-ray photoelectron spectroscopy (XPS) and pyrolysis–gas chromatography with time-of-flight mass spectrometry (Py-GC/TOFMS). Removal rates of 20 mm²/min in area, 52 mm³/min in volume, and 7 μm/min in depth were achieved with an inter-electrode distance of 10.0 mm and an air flow rate of 20 standard liters per minute. A removal depth of 10 μm/min was achieved without air supply. The mechanism of stain removal by spark discharge was modeled by decomposing the original high-molecular-weight molecules in polyester-based urethane rubber into low-molecular-weight molecules, such as methylene diisocyanate (MDI) components. The results of this study may facilitate the development of a novel electric vacuum cleaner capable of removing floor stains. Full article

Rare earth elements (REEs) hold significant industrial, scientific, and modern technological worth. This study focused on detecting and quantifying REEs in various geological ore samples. These samples were collected from different REE-bearing locations recommended by geological experts. The analysis was conducted using laser-induced breakdown spectroscopy (LIBS) and laser ablation time-of-flight mass spectrometry (LA-TOF-MS). In this work, LIBS methodology was employed using three different configurations: standard LIBS, LIBS with an applied magnetic field, and LIBS with both an applied magnetic field and target sample heating within an optimal temperature range. Elements from the REE group, specifically lanthanum (La), cerium (Ce), and neodymium (Nd), were identified and quantified. To detect, quantify, and validate the results from LIBS and LA-TOF-MS, we utilized an array of analytical techniques—Energy-Dispersive X-ray Spectroscopy (EDX), Energy-Dispersive X-ray Fluorescence Spectrometer (ED-XRF), and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Interestingly, the quantitative results for REEs (La, Ce, and Nd) in the ore samples obtained using the LIBS technique with various configurations were found to be in agreement with those from LA-TOF-MS, EDX, XRF, and ICP-OES. In addition, LIBS enables detailed microchemical imaging, allowing the map of the spatial distribution of elements within the mineral–ore matrix. The high-resolution microscale elemental mapping of REEs was accomplished using the emission lines Ce (II) at 446.0 nm, La (II) at 492.1 nm, and Nd (II) at 388.8 nm. By integrating multiple analytical techniques, our study enabled the construction of a complete elemental distribution map, providing new insights into the geochemical processes and mineral composition of rare earth ores, while advancing geochemistry and contributing valuable data for rare earth resource exploration. Full article

Background: Heracleum sphondylium, a medicinal plant used in Romanian ethnopharmacology, has been proven to have remarkable biological activity. The escalating concerns surrounding antimicrobial resistance led to a special attention being paid to new efficient antimicrobial agents based on medicinal plants and nanotechnology. We report the preparation of a novel, simple phytocarrier that harnesses the bioactive properties of H. sphondylium and silver nanoparticles (HS-Ag system). Methods: H. sphondylium’s low metabolic profile was determined through gas chromatography–mass spectrometry and electrospray ionization–quadrupole time-of-flight–mass spectrometry. The morphostructural properties of the innovative phytocarrier were analyzed by X-ray diffraction, Fourier-transform infrared spectroscopy, Raman spectroscopy, dynamic light scattering, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The antioxidant activity was evaluated using total phenolic content, ferric reducing antioxidant power, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) in vitro assays. The antimicrobial activity screening against Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, and Escherichia coli was conducted using the agar well diffusion method. The 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay estimated the in vitro potential cytotoxicity on normal human dermal fibroblasts (NHDF) and cervical cancer (HeLa) cells. Results: A total of 88 biomolecules were detected, such as terpenoids, flavonoids, phenolic acids, coumarins, phenylpropanoids, iridoids, amino acids, phytosterols, fatty acids. The HS-Ag phytocarrier heightened efficacy in suppressing the growth of all tested bacterial strains compared to H. sphondylium and exhibited a significant inhibition of HeLa cell viability. Conclusions: The new HS-Ag phytocarrier system holds promise for a wide range of medical applications. The data confirm the capacity to augment the pertinent theoretical understanding in the innovative field of antimicrobial agents. Full article

Due to the similar physical and chemical properties of ilmenite and olivine, separating them is challenging. The flotation process, with the use of collectors, is an effective method. In this study, a ternary collector consisting of aluminum ion (III), benzohydroxamic acid (BHA), and sodium oleate (NaOL) was prepared for the flotation separation of ilmenite and olivine. Through micro-flotation experiments, molecular dynamics simulation (MD), density functional theory (DFT), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis, the synergistic effect between the components of the ternary collector and the adsorption configuration on the surface of ilmenite was investigated. The results revealed that at pH = 8, Al (III), BHA, and NaOL could coordinate and adsorb effectively on the surface of ilmenite, enhancing its floatability for separation from olivine. The adsorption configuration differed from previous reports, showing a co-adsorption of multiple forms on the surface of ilmenite. Full article

Many naturally occurring chemical metabolites with significant cytotoxic activities have been isolated from medicinal plants and have become the leading hotspot of anti-cancer research in recent years. Hyptis rhomboidea Mart. et Gal is used as a folk medicine in South China to treat or assist in the treatment of liver disease, ulcers, and edema. But its chemical constituents have not been fully investigated yet. This study aimed to assess the cytotoxicity of H. rhomboidea, which was chemically characterized by chromatography–mass spectrometry methods. The results showed that the 95% ethanol extract of H. rhomboidea has marked inhibitory effects on five human cancer cell lines (HL-60, A549, SMMC-7721, MDA-MB-231, and SW480), with IC₅₀ values ranging from 15.8 to 40.0 μg/mL. A total of 64 compounds were identified by ultra-high-performance liquid chromatography with quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) and gas chromatograph–mass spectroscopy (GC-MS) analysis of H. rhomboidea crude extract. Among them, kaempferol, quercetin, rosmarinic acid, squalene, and campesterol were found to be abundant and might be the major metabolites involved to its bioactivity. The cytotoxic characterization and metabolite profiling of H. rhomboidea displayed in this research provides scientific evidence to support its use as medicinal properties. Full article

The present investigation was performed to figure out the chemical constituents and biological potential of polar extracts (AcOEt and BuOH) from Achillea ligustica, a medicinal species of the Asteraceae family. Liquid chromatography quadrupole time-of-flight mass spectrometry (LC-Q-TOF-MS) was utilized to conduct a preliminary analysis of the phytochemical profiles of the AcOEt and BuOH extracts. The analysis revealed the existence of twenty compounds in the AcOEt extract and twenty-two in the BuOH extract, classified into various types of secondary metabolites. Subsequently, the exudate from the plant yielded five flavonoids, including two 6-methoxyflavonols identified for the first time in this genus. The isolation of compounds from AcOEt and BuOH extracts was achieved through the combined use of column chromatography (silica gel and Sephadex LH-20) and preparative TLC chromatography. The structures have been elucidated using 1D and 2D NMR spectroscopy, alongside comparisons with research data. Our study measured the total phenolic and flavonoid contents and carried out a comprehensive range of antioxidant tests using DPPH, GOR, CUPRAC, reducing power, and O-phenanthroline assays. Both extracts exhibited considerable antioxidant potential and contained high levels of phenolic and flavonoid compounds. The photoprotective effect of the AcOEt and BuOH extracts was evaluated in vitro by measuring the sun protection factor. Both extracts exhibited a high capacity for UV radiation absorption. Consequently, this plant presents an intriguing prospect for future research focused on incorporating it into photoprotective cosmetic products and pharmaceutical formulations. Full article

An alkali-soluble β-glucan (AHEP-A-b, 20 kDa) purified from Hericium erinaceus fruiting bodies, was structurally characterized and examined for antioxidant activity. Methylation analysis and NMR spectroscopy show that the backbone of AHEP-A-b is composed of (1→6)-linked-D-β-glucopyran residues, branched at O-3 of glucopyranose (Glcp) residues with [→3)-β-D-Glcp-(1→] oligosaccharides or single unit of β-Glcp. Periodate oxidation analysis and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS) indicate that the degree of polymerization (DP) of [→3)-β-D-Glcp-(1→] side chains is 2 to 8. Functionally, AHEP-A-b is a relatively strong antioxidant as demonstrated by using 2, 2′-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) free radical (ABTS^·+), 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, and hydroxyl radicals scavenging assays. The present study lays the foundation for further studies into structure-activity relationships of polysaccharides from H. erinaceus. Full article

The textile industry significantly contributes to environmental pollution through its use of synthetic dyes, especially sulfur black, known for its toxicity and resistance to degradation. This research focuses on a fungal strain, Aspergillus sp. strain DS-28, isolated from activated sludge, which exhibits an exceptional ability to biodegrade sulfur black dye. This study systematically assessed the biodegradation capacity of this strain through a series of experiments conducted over a 7-day period. Analytical techniques including high-performance liquid chromatography time-of-flight mass spectrometry (HPLC-TOF/MS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR) were employed to monitor the degradation process. SEM showed a significant reduction in particle size, with surfaces becoming smoother and flatter post treatment. XRD indicated a decrease in the intensity of several chemical bonds, and FTIR analysis demonstrated the enhanced vibrational absorption peaks of benzene ring bonds, with the disappearance of -C-S- and -C-S-S-C- groups. The results demonstrate that Aspergillus sp. DS-28 degrades sulfur black by initiating the oxidative breakdown of its complex structures into simpler forms. This study not only elucidates the biodegradation pathway facilitated by Aspergillus sp. DS-28, but also highlights its potential application in developing eco-friendly waste management strategies for treating dye-contaminated wastewater. Full article