Version 1
: Received: 22 April 2024 / Approved: 22 April 2024 / Online: 23 April 2024 (03:17:10 CEST)
How to cite:
Breuer, U.; Turos, J. L.; Jungbluth, J.; Schäfer, M.; Weber, S. Interlaminar Fracture Toughness Enhancement of Fine Short Fibre Z-pin Reinforced Carbon Fibre Composite. Preprints2024, 2024041404. https://doi.org/10.20944/preprints202404.1404.v1
Breuer, U.; Turos, J. L.; Jungbluth, J.; Schäfer, M.; Weber, S. Interlaminar Fracture Toughness Enhancement of Fine Short Fibre Z-pin Reinforced Carbon Fibre Composite. Preprints 2024, 2024041404. https://doi.org/10.20944/preprints202404.1404.v1
Breuer, U.; Turos, J. L.; Jungbluth, J.; Schäfer, M.; Weber, S. Interlaminar Fracture Toughness Enhancement of Fine Short Fibre Z-pin Reinforced Carbon Fibre Composite. Preprints2024, 2024041404. https://doi.org/10.20944/preprints202404.1404.v1
APA Style
Breuer, U., Turos, J. L., Jungbluth, J., Schäfer, M., & Weber, S. (2024). Interlaminar Fracture Toughness Enhancement of Fine Short Fibre Z-pin Reinforced Carbon Fibre Composite. Preprints. https://doi.org/10.20944/preprints202404.1404.v1
Chicago/Turabian Style
Breuer, U., Mareike Schäfer and Samuel Weber. 2024 "Interlaminar Fracture Toughness Enhancement of Fine Short Fibre Z-pin Reinforced Carbon Fibre Composite" Preprints. https://doi.org/10.20944/preprints202404.1404.v1
Abstract
In the history of high-performance polymer composite parts with continuous in-plane fibre reinforcement, the comparatively moderate structural-mechanical properties in their out-of- plane-z-direction and the limited load carrying capability between individual reinforcement layers within the laminated structures have always been one of the greatest challenges. Plenty of research work has been carried out to improve load transfer capability as well as fracture toughness for crack opening events between the reinforcement layers by means of out-of-plane fibre reinforcement implementation, for example by sewing or z-pinning technologies. However, the results have not become established across a wide range of applications so far, because the technologies used have led to considerable losses of in-plane strength properties. In this paper first results are presented for a new method of a low fraction z-fibre reinforcement by means of very thin diameter laser drilled holes filled with short carbon fibres, demonstrating potential to improve Mode II fracture toughness.
Copyright:
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.