An analytical model for face stability of tunnels traversing the fault fracture zone with high hydraulic pressure

Water-bearing fault of subsea tunnel has fissure water developed, fractured surrounding rock with low strength, which gets a risk of sudden water inflow and affects the tunnel security. This paper takes the geological forecast and treatment for water-bearing fault of the Qingdao kiaochow bay subsea tunnel for example, according to the water assignment characteristics, using the detect method of TEM and advance borehole to make accurate decision for the position of water-bearing body、the scale of fracture zone and the inflow of water. Through the analysis of results, the grouting form, materials and parameters are chosen and adjusted. The grouting material seals the water flowing fracture, forming water-stopping curtain outside tunnel excavation contour line and strengthening the fault fracture zone to improve the stability of rock.

In order to analyze the stability of the tunnel construction of the fault fracture zone, by adopting the three-dimensional finite element, the paper analyzed the construction process of the Qingshashan Tunnel passing through the F5 fault fracture zone, and the rules and characteristics of deformation, stress distribution and its rules of changes, and the distribution range of the failure zone of the surrounding rock in the construction process, which would have important significance in guiding tunnel construction. Studies have shown that the three-dimensional finite element has a broad application prospect in tunnel projects.

As for the slope with fault fracture zone, the fault fracture zone is the main sliding surface, whose shear strength parameter is the main calculation parameter of landslide occurrence. In this paper, shaking table model tests and damage theory were used to study the change of shear strength and mechanical cumulative damage model of fault fracture zone under the blasting vibration cyclic load. At first, the slope of Daye Iron Mine is selected as a case to study the shear strength weakening law of fault fracture zone by the similarity theory and the principle of the orthogonal test, in which the influence of the characteristics of vibration loading on the shear strength parameters of fault fracture zone with different thicknesses was studied. Secondly, by the assumption of Lemaitre strain equivalence and according to the extreme value characteristics of the normal stress-shear stress curve, the damage theory model of the fault fracture zone was reconstructed, and the microelement of fault was selected for analysis and divided into two parts, including damaged and undamaged materials. Finally, the results of the shaking table model tests were compared with the results of the shear cumulative damage model to verify the rationality of the theoretical model. Moreover, the predicted results of the theoretical model can better reflect the degradation trend of the fault fracture zone with the loading amplitude, normal stress, and loading times. It can be used as a reference for slope stability prediction under the action of cumulative static and dynamic loads.