Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
178 views

Process Design Data Sheet C-401

Process Design Data Sheet for distillation column C-401 used to separate C12 from C14. The vertical column is 9.5 meters tall, has a diameter of 1.1 meters, and is located on the ground floor. It uses Flexi Pac HC structured packing with 3 beds that are each 2.8 meters tall to separate the components at temperatures of 220C for the feed, 200C at the top, and 250C at the bottom.

Uploaded by

Tej Choksi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
178 views

Process Design Data Sheet C-401

Process Design Data Sheet for distillation column C-401 used to separate C12 from C14. The vertical column is 9.5 meters tall, has a diameter of 1.1 meters, and is located on the ground floor. It uses Flexi Pac HC structured packing with 3 beds that are each 2.8 meters tall to separate the components at temperatures of 220C for the feed, 200C at the top, and 250C at the bottom.

Uploaded by

Tej Choksi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Process Design Data Sheet

Process Design Data Sheet For Column C-401


DOC. NO.: PROCESS DATASHEET FOR Distillation Column CLIENT: TEJ SALIL CHOKSI SERVICE: SEPARATION OF C12 EQPT NO.: C-401 FROM C14 DIMENSIONS: HT = 9.5 m MOUNTING: VERTICAL SP.GR. MATERIALS FATTY ALCOHOLS METHNAOL C12 WAX ESTER LOCATION: On Ground Floor UNITS NORMAL PRESSURE DESIGN PRESSURE DESIGN TEMP kg/cm2 (g) kg/cm2 (g) C VESSEL 5.1 6 200 REFLUX RATIO MINIMUM OPERATING 0.65 0.78 (AVG.) 0.85 UNITS -QTY --REMARKS WORKING ACTUAL NOMINAL NA DIA = 1.1 m CAPACITY LITERS QUANTITY: 1 CAD. NO.: SHT.: PROJECT : HOME PAPER 2011-12. CONTRACT NO.:

MIN. ELEVATION (FOR NPSH):

Process Design Data Sheet M.O.C. SS-316 NO. OF THEORETICAL CORROSION ALLOWANCE LINING MATERIAL: PACKINF FACTOR: 120 ft2/ft3 HETP: 14 INCHES OPERATING VAPOR VELOCITY: 0.86 m/s TYPE OF SUPPORT: SKIRT SUPPORT NO. OF BEDS: 3 FLOODING VELOCITY: 1.43 m/s NOS.: 1 HT. OF EACH BED: 2.8 % OF FLOODING VELOCITY: 60 mm N/A N/A THK.: N/A MOC OF PACKING: SS-316 PLATES 24

TYPE OF PACKING: FLEXI PAC HC STRUCTURED

FEED TEMPERATURE: 220C TOP TEMPERATURE: 200C BOTTOM TEMPERATURE: 250C LIQUID DISTRIBUTOR: PERFORATED PIPE NO. 3 NO. OF HOLES. 60

PACKING SUPPORT: GAS INJECTION METAL SUPPORT PLATE (JAEGAR CORPORATION) PACKING RETAINER GRID: HEIGHT: 4 INCHES, DIAMETER 35.75 INCHES INSULATION: ASBESTOS RADIOGRAPHY : * JOINT EFFICIENCY : * NOTES : 1. MECHANICAL TO SPECIFY MARKED THUS ' * ' STRESS RELIEVED : *

You might also like