Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
53 views

Slab

This document summarizes the design of a two-way slab. The slab has smaller and larger sides of 3.733m and 5.791m respectively. The slab thickness is 6.75m with reinforcement of 8 bars of diameter 12mm on the top and bottom. The required and provided reinforcement for the short and long edges were calculated and checked to be adequate based on the given parameters like moments, area of steel, and spacing. The deflection was also checked using the mid-span deflection formula from IS-456 and found to be within limits.

Uploaded by

Er Saurabh Shah
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
53 views

Slab

This document summarizes the design of a two-way slab. The slab has smaller and larger sides of 3.733m and 5.791m respectively. The slab thickness is 6.75m with reinforcement of 8 bars of diameter 12mm on the top and bottom. The required and provided reinforcement for the short and long edges were calculated and checked to be adequate based on the given parameters like moments, area of steel, and spacing. The deflection was also checked using the mid-span deflection formula from IS-456 and found to be within limits.

Uploaded by

Er Saurabh Shah
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN OF TWO-WAY SLAB

Continuous

Type of slab

CONDITION

3.733 Smaller side


5.791 Larger side
6.75
125
20
415
10.13
1.55
5.791
8.634
1.491

119.6474

One-Way

SHORT EDGE

Continuous

Top 8@ 400mm c/c


Bottom 8@ 200mm c/c

Interior panels
SAFE

3.733
Top 8@ 400mm c/c
Bottom 8@ 200mm c/c

5.791

Continuous

SLAB

LONG EDGE

LONG EDGE

SHORT EDGE

Continuous

Lx
Ly
W (work.)
d
Fck
Fy
W (Service)
Ly/Lx
K=(Wx/Wy)
Wx
Wy

Coefficient
-ve
x
y

+ve
0.054
0.032

x
y

Mx
My

Moments(-ve)
7.68
4.52

KNm
KNm

Moments(+ve)
5.90
3.39

KNm
KNm

Astx
Asty

Ast(-ve)
175.38
101.81

mm2
mm2

Ast(+ve)
133.78
76.03

mm2
mm2

Dia
Astx top
Astx bott
Asty top
Asty bott

ast req
Pt req
Spa. Req Spa. Pro Ast pro
Pt prov.
Check
8
175.38
0.140
275
400
251.2 0.20096 O.K
8 133.7816
0.107
150
200
251.2 0.20096 O.K
8
101.81
0.081
475
400
251.2 0.20096 O.K
8 76.02878
0.061
150
200
251.2 0.20096 O.K

CHECK FOR DEFLECTION


Fs
a1 (M.F)

128.1896
2 From IS-456, pg no. 38

0.042
0.024

Alternate bent up
Alternate bent up

You might also like