PRODUCT SPEC SHEET AP 621

COST-EFFICIENT SINGLE RADIO 802.11A/B/G/N WIRELESS ACCESS POINT

LESS IS MORE
Motorolas WiNG 5 WLAN solutions offer all the benefits of 11nand then some. Our distributed architecture extends QoS, security and mobility services to the APs so you get better direct routing and network resilience. That means no bottleneck at the wireless controller, no latency issues for voice applications, and no jitter in your streaming video. And with our broad selection of access points and flexible network configurations, you get the network you need with less hardware to buy. Let us show you the less complicated, less expensive way to more capacity, more agility, and more satisfied users.

AP 621
UNIQUE VALUE

The AP 621 combines the power WiNG 5 intelligence at the edge with the cost-efficiency of a single radio thin wireless access point. When deployed with a wireless controller, the access point offers top 802.11a/b/g/n performance along with direct forwarding, security and QoS services at the edge.

The AP 621 is a thin (dependent) multipurpose access point designed to lower the cost of deploying and operating a secure, reliable 802.11n wireless LAN (WLAN) in branch offices or headquarters facilities. The access point features a MIMO radio, superior receive and transmit sensitivity, and a GigE WAN uplink port. The AP 621 is easily managed remotely by a Motorola RFS 7000 or other wireless controller. The embedded WiNG 5 intelligence ensures that traffic is locally forwarded along the most efficient paths without sacrificing quality of service and security implemented at the access point itself.

HIGH RELIABILITY

The AP 621 is designed to optimize network availability through its central and pre-emptive intelligence which dynamically senses weak or failing signals, securely moves mobile users to alternate APs, and boosts signal power to automatically fill RF holes and ensure uninterrupted mobile user access.

GAP-FREE SECURITY

Security includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite,VPN gateway, and location-based access control.

AUTOMATIC CHANNEL AND POWER OPTIMIZATION

FAST AND EASY DEPLOYMENT

Common problems such as building attenuation, electronic interference or sub-optimal access point placement are minimalized as the SMART RF feature of the switch/ controller automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility.

The access ports require no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer 3 deployments.

PAGE 1

PRODUCT SPEC SHEET AP 621

DEVICE AND NETWORK ACCELERATION

Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each AP 621 access point can be virtualized into four unique VLANs which can be customized to direct

broadcast traffic to the intended recipient. This reduces overall network traffic while improving device performance and battery life up to 25%. This also reduces the overall number of access points required to provide unique device services.

FEATURES
Full 802.11n performance with standard 802.3af Simplifies and reduces total cost of installation using standard Power-overEthernet (PoE) Multiband Operation Supports both 2.4 Ghz and 5.0 Ghz frequency bands

AP 621 SPECIFICATIONS CHART

PHYSICAL CHARACTERISTICS Dimensions: Weight: Part number: AP 621 (INTERNAL ANTENNA) 9.5 in. L x 7.5 in. W x 1.7 in. H 24.13 cm L x 18.916 cm W x 4.36 cm H 2.0 lbs./.91 kg AP-0621-60010-US AP-0621-60010-WR Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount No AP 621 (EXTERNAL ANTENNA) 8.5 in. L x 5.6 in. W x 1.5 in. H 21.64 cm L x 14.10 cm W x 3.771 cm H 2.5 lbs./1.14 kg AP-0621-60020-US AP-0621-60020-OUS AP-0621-60020-WR Ceiling-mount (above tile); wall-mount Yes, certified to UL 2043 2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps802.11a: 6,9,12,18,24,36,48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps 802.11a, 802.11b, 802.11g, 802.11n Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO) VLANs and WLANs are controller-dependent Auto-sensing 10/100/1000Base-T Ethernet 5GHz: All channels from 5180 MHz to 5825 MHz 2.4GHz: 2412-2472 MHz Actual operating frequencies depend on national regulatory limits 24dBm 1dB increments 2x2 MIMO (transmit on two and receive on two antennas) FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNII -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz Continued on next page...

Mobility Supports fast secure roaming Application Support Supports Call Admission Control, for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11 a/b/g/n clients Load balancing, pre-emptive roaming and rate scaling Increases reliability and resilience of the wireless network to support mission critical applications

Available mounting configurations: Plenum rated: LED indicators: Data rates supported: Network standard: Wireless medium: VLANs/WLANs supported: Uplink: RADIO CHARACTERISTICS Operating channels:

WIRELESS DATA COMMUNICATIONS AND NETWORKING

Maximum available transmit power: Transmit power Adjustment: Antenna configuration: Operating bands:

PAGE 2

PRODUCT SPEC SHEET AP 621

AP 621 SPECIFICATIONS CHART (continued)

USER ENVIRONMENT Operating temperature: Storage temperature: Operating humidity: Operating altitude: Storage altitude: Electrostatic discharge: POWER SPECIFICATIONS Operating voltage: Operating current: Integrated Power-over-Ethernet support: Typical Operational RMS Power Consumption: MAXIMUM RADIO TRANSMIT POWER: BAND 2400MHZ 5200MHZ ANTENNA PORT SPECIFICATON Type: Band: Integrated 2.4 GHz and 5.2 GHz Dual-Antenna Elements Two RP-SMA connectors for external antennas (not included) 2.4 GHz to 2.5 GHz; 5.180 GHz to 5.850 GHz (actual operating frequencies depend on regulatory rules and certification agency) SINGLE ANTENNA COMPOSITE TRANSMIT POWER +24 dBm +20 dBm DUAL ANTENNA COMPOSITE TRANSMIT POWER +27 dBm +23 dBm 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range) 270mA rms at 48V Standards-based IEEE 802.3af 10W (209mA at 48V) AP 621 (INTERNAL ANTENNA) 32F to 104 F/0C to 40 C -40F to 158 F/-40C to 70 C 5%-95% (non-condensing) 8,000 ft./2438 m 15,000 ft./4572 m +/- 15 kV (Air), +/- 8 kV (contact) AP 621 (EXTERNAL ANTENNA)

INTERNAL ANTENNA INFORMATION INTERNAL ANTENNA DESCRIPTION Peak gain, 2.4GHz band Peak gain, 5.2GHz band REGULATORY Product safety certifications: Radio approvals: UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna) FCC (USA), Industry Canada, CE (Europe) Continued on next page... VALUES 3.0dBi 6.0dBi

PAGE 3

PRODUCT SPEC SHEET AP 621

CONDUCTED RECEIVER SENSITIVITY (ANTENNA ELEMENT NOT INCLUDED) (typical) at antenna housing connector, 2400MHz band
Rate/MCS 1 2 5.5 11 6 9 12 18 24 36 48 54 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 Mode Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 Sensitivity (dBm) -95 -95 -95 -92 -96 -96 -95 -93 -89 -86 -82 -81 -96 -94 -91 -88 -85 -81 -79 -78 -93 -90 -87 -85 -82 -77 -76 -74 -92 -90 -88 -85 -82 -78 -76 -75 -89 -86 -84 -81 -78 -73 -72 -70

CONDUCTED RECEIVER SENSITIVITY (ANTENNA ELEMENT NOT INCLUDED) (typical) at antenna housing connector, 5200MHz band
Rate/MCS 6 9 12 18 24 36 48 54 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 Mode Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 Sensitivity (dBm) -94 -93 -93 -91 -87 -84 -80 -79 -94 -92 -90 -86 -84 -79 -78 -76 -91 -88 -86 -83 -80 -75 -74 -72 -90 -88 -86 -83 -80 -76 -74 -73 -88 -85 -82 -80 -76 -72 -71 -69

For more information on how the AP 621 can benefit your business, please visit us on the web at motorola.com/wlan or access our global contact directory at www.motorola.com/enterprisemobility/contactus

Part number: SS-AP621. Printed in USA 04/11. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2011 Motorola Solutions, Inc. All rights reserved. Specifications are subject to change without notice.

G3-29-112