iP1000 SIMPLIFIED SERVICE MANUAL

1. PRODUCT LIST 2. PRODUCT SPECIFICATIONS 3. ERROR DISPLAY 4. SERVICE MODE 5. EXTERNAL VIEW / PARTS LIST 6. TROUBLESHOOTING FLOWCHART 7. SPECIAL NOTES ON SERVICING IN ASIA 8. PRODUCT TECHNICAL INFORMATION APPENDIX 1: SHIPMENT INSPECTION PATTERN 1 APPENDIX 2: iP1000 SERVICE TOOL

QY8-13A2-010 Rev. 01 June 18, 2004 Canon Inc.

1. PRODUCT LIST 1-1. Main Units

Product name Canon Bubble Jet Printer iP1000 Product code 9517A003AA 9517A004AA 9517A005AA 9517A005AB 9517A008AA 9517A009AA 9517A010AA 9517A013AA 9517A014AA 9517A015AA 9517A018AA 9517A019AA 1-2. Options None 1-3. Consumables Product name Canon Ink Tank BCI-24 Black Product code 6881A001AA 6881A002AA 6881A003AA 6881A004AA 6882A001AA 6882A002AA 6882A003AA 6882A004AA 6881A008AA 6881A009AA 6881A010AA 6881A011AA 6882A008AA 6882A009AA 6882A010AA 6882A011AA Sales territory JPN EUR USA/CAN ASIA/AUST JPN EUR USA/CAN ASIA/AUST JPN EUR USA/CAN ASIA/AUST JPN EUR USA/CAN ASIA/AUST Remarks In common with the S200, S200x, S300, S330, i320, i35, i355, i250, and i255 Sales territory LAM LVT LAM HVT EMB EMB ASA HVT AU KR TW HK CN MY TH Remarks

Canon Ink Tank BCI-24 Color

Canon Ink Tank BCI-24 Black Twin Pack

Canon Ink Tank BCI-24 Color Twin Pack

2. PRODUCT SPECIFICATIONS 2-1. Printer Main Unit Specifications

Paper feeding method Resolution Printing speed
ASF 4,800 x 1,200 dpi (max.) Measured by throughput patterns Fine_BK and Fine_CL. 6.6 ppm (CL throughput pattern) 11.3 ppm (BK throughput pattern) 11 ppm (CL throughput pattern) 14 ppm (BK throughput pattern) Bi-directional / Uni-directional (automatically switched according to print data and print mode) 50% duty 203.2 mm (8 inches) USB (2.0) Full Speed only Service part: QY6-0044-000 CL approx. 170 pages, BK approx. 520 pages (SCID No.5 pattern, default print mode) BK approx. 300 pages (1500 character pattern, default print mode) 2 Max. 10 mm (Approx. 100 pages of 75 g/m ) 2 64 to 105 g/m 10 mm or less 10 mm (Approx. 80 sheets) or less 10 sheets or less A4, LTR, 5x7: 4x6: 10 sheets or less 20 sheets or less

HQ HS

Printing direction Draft mode print duty Print width Interface Supported print head No. of pages that can be printed
CL BK

CL BK CL BK

ASF stacking capacity Paper weight

Plain paper High Resolution Paper Glossy Photo Paper Photo Paper Pro, Photo Paper Plus Glossy, Matte Photo Paper, Photo Paper Plus Semi-gloss Transparency Envelope Photo Stickers T-shirt Transfer

Borderless printing Detection function

30 sheets or less 10 sheets or less 1 sheet 1 sheet 4x6 and 5x7 only Available Available Not available Available Not available Available Available (Detected by dot counting. Reset by user operation. Enabled at default.) Available (6 types)

Cover open Presence of print head Presence of ink tank Presence of paper Paper width Waste ink absorber full Remaining ink amount

Print head alignment Acoustic noise level

Environmental requirements
During operation Non-operation

Fine (Glossy Photo Paper / Fine mode) Approx. 48 dB (Sound pressure level ISO9296) HQ Approx. 56 dB HS Approx. 59 dB Temperature: Humidity: Temperature: Humidity: 5C to 35C (41F to 95F) 10% to 90%RH (no condensation) 0C to 40C (32F to 104F) 5% to 95%RH (no condensation)

Power supply

Input voltage / Frequency Power consumption:

External dimensions

AC 100 to 127 V, 50/60Hz (LV) AC 220 to 240 V, 50/60Hz (HV) During printing Approx. 8 W Stand-by status Approx. 1 W Approx. 385 (W) x 224 (D) x 268 (H) mm Approx. 385 (W) x 195 (D) x 165 (H) mm Approx. 2.3 kg (excluding the print head and ink tanks) FCC, IC, CE, C-Tick, VCCI, Taiwan PRC, Korea MIC, Gost-R, UL, CUL, CB Report, GS, FT, CCC, Korea EK, SASO, SPRING, CE Mark, IRAM

With the paper support extended (no paper output tray) With the paper support retracted (no paper output tray) Electromagnetic radiance, Electrical safety

Weight Related standards

Note: Not Blue Angel compliant.

2-2. Product Life Specified print volume or the years of use, whichever comes first. - 3 years of use - Print volume: 4,000 pages - Black: 2,000 pages (A4, standard mode, 1,500 character pattern) - Color: 1,200 pages (A4, 7.5% duty per color pattern) 120 pages (A4, photo, borderless printing) 80 pages (4 x 6, photo, borderless printing) 600 pages (Postcard, photo, borderless printing) 2-3. Print Head Specifications Type Print head 4-color integrated type (ink tank separate type) BK: 320 nozzles in 2 vertical lines C/M/Y: 128 nozzles in 2 vertical lines per color Ink droplet: BK 30 pl, CL 5 pl BK (pigment-based ink) CL: Y, M, C (high brilliance) BCI-24 Black, BCI-24 Color (In common with the S300, S330, i320, i350, i355, i250, and i255) Approx. 60g (excluding ink tanks) Service part (excluding ink tanks) Part number: QY6-0044-000 (In common with the i350, i355, i250, and i255, however, not compatible with the S300 and S330 series.)

Ink color Ink tank Weight Supply method

Print head life 4,000 pages (Same as the printer main unit) Note: Although the print head can be physically installed in the S300 and S330 series printers, it is incompatible with and cannot be used in those models.

3. ERROR DISPLAY Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.
3-1. Operator Call Error (LED Blinking in Orange) LED Error blinking 2 times Paper out
3 times 4 times 5 times Paper jam Ink tank not installed Print head not installed or failure has occurred in the print head. (Non-supported print head (see page 4) is installed or print head EEPROM data is abnormal.) Waste ink absorber full or platen waste ink absorber full warning (approx. 95% of the maximum capacity)

Corrective action Set paper, and press the Resume/Cancel button to feed the paper. Remove the jammed paper, and press the Resume/Cancel button. Re-install the ink tanks, and close the access cover. Install the print head, and close the access cover. Or, confirm the print head is QY6-0044-000 and perform re-installation. If not recovered with the print head installed, power the printer off and on. Pressing the Resume/Cancel button will exit the error, and enable printing.

8 times

3-2. Service Call Error (LED Blinking in Orange and Green Alternately) LED Error Corrective Action blinking 2 times Carriage error Replace the printer as it has failed. 6 times Internal temperature error Replace the printer as it has failed. 7 times Waste ink absorber full or platen waste ink Replace the printer as it has failed. absorber full 8 times Print head temperature rise error Replace the printer as it has failed. 9 times EEPROM error Replace the printer as it has failed. 10 times No print head detected excepting print head Replace the printer as it has failed. replacement (during printing)

3-3. Ink Low Warning (Ink low warnings are displayed by the Status Monitor only when the remaining ink level detection is enabled, and no Status Monitor display when disabled.) Note: The Status Monitor display in the table below is for Windows. Warning Display by Status Monitor
Ink low warning 1 (approx. half level)

Ink low warning 2 (low remaining ink)

Ink low warning 3 (ink level unknown)

4. SERVICE MODE To conduct the following functions, a host computer (Windows 98 / ME / 2000 / XP), printer driver and service tool (QY9-0065) for the iP1000 are needed. If an error has occurred in the printer, the service tool cannot be used as it is. To use the service tool, set the printer in the special mode, following the procedures below. <Special mode setting procedures> With the print head installed, while pressing and holding the Power button, connect the AC plug. After the LED lights in green, with the Power button still pressed, press the Resume/Cancel button 2 times, and release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)
Function Print head manual cleaning < For reference > Print head refreshing (deep cleaning) Paper feed roller cleaning Procedure Select Cleaning from the printer driver utility. Select Deep Cleaning from the printer driver utility. Remarks Cleaning time: Approx. 40 sec. Cleaning time: Approx. 70 sec.

Cleaning time: Approx. 2 min. 1. Remove the paper from the ASF. 2. Select Roller Cleaning from the printer driver utility. 3. Following the instruction from the Status Monitor, load 3 sheets of plain paper in the ASF, and feed them. Nozzle check pattern printing

Test printing 1) Nozzle check pattern printing Select Nozzle Check from the printer driver utility. < For Reference > Print head alignment

Significant misalignment can be 1. Select Print Head Alignment from the printer driver adjusted. utility. 2. Select the optimal value using the printed head position adjustment pattern. Refer to Shipment inspection pattern sample*2 below. Host computer and service tool are required. Host computer and service tool are required. Host computer and service tool are required.

Refer to Shipment inspection pattern*1 below. 2) Shipment pattern printing - ROM version - Number of pages fed - Waste ink amount EEPROM reset Refer to EEPROM reset / Destination setting*3 below. (Reset of waste ink counter etc.) Destination setting Refer to EEPROM reset / Destination setting*3 below.

*1 Shipment inspection pattern a. Install the print head (QY6-0044-000), and press the Power button to turn on the printer. (The LED lights in green.) b. Load A4-sized paper. c. Connect the printer to the computer. Using the iP1000 service tool (QY9-0065), select USB PORT. (Refer to Appendix 2, iP1000 Service Tool.) d. Select TEST PATTERN 1. The printer starts printing the shipment inspection pattern.
2 * Shipment inspection pattern sample EEPROM contents can be confirmed from the shipment inspection pattern printout (top of the shipment inspection pattern).

Model name ROM Version Waste ink amount (%) Number of pages fed: Page: Total number of pages fed PL: Plain paper PR: PR101, SP101, MP101 CA: Postcard, Inkjet postcard, Glossy postcard BL: Borderless printing (Counted separately from other media)

IP1000 P=V X.XX D=XXXXX.X Page=XXXX PL=XXXX ,HR=XXXX ,GP=XXXX ,CA=XXXX ,BL=XXXX SettingTime=XXXX / XX / XX XX:XX YY YY YY YY USB= (YYYYYY)

Installation time

EEPROM reset / Destination setting a. Install the print head (QY6-0044-000), and press the Power button to turn on the printer. (The LED lights in green.) b. Connect the printer to the computer. Using the iP1000 service tool (QY9-0065), select USB PORT. (Refer to Appendix 2, iP1000 Service Tool.)

c. <Destination setting> Destination can be set by clicking each model name in SET DESTINATION. Confirm the model name by clicking GET DEVICE ID after setting change. (If incorrect, it can be changed before turning the unit OFF/ON.) <EEPROM reset> When EEPROM CLEAR is checked, the EEPROM is reset after the shipment inspection pattern printing. (At EEPROM reset, the main waste ink counter value is re-set to 3,000mg.)

5. EXTERNAL VIEW / PARTS LIST 5-1. External Parts, Power Supply Unit, Logic Board Assy

5-2. Print Unit

Parts List
Key Part Number QY6-0044-000 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 S1 QC1-5681-000 QM2-1845-000 QC1-5677-000 QC1-5678-000 QC1-5680-000 QC1-5672-000 QM2-1764-000 QK1-1006-000 QK1-1010-000 QA4-1268-000 QC1-1695-000 WT2-5694-000 QC1-1690-000 QM2-1445-000 QM2-1443-000 QA4-1223-000 QA4-1255-000 XA9-1493-000 Rank K J J J J J J I I N I I I I I I I I G Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9 PRINT HEAD PAPER SUPPORT UPPER COVER UNIT, WITH BUTTON SIDE COVER L SIDE COVER R COVER, I/F FRONT COVER LOGIC BOARD ASSY AC ADAPTER: 100/120V 50/60HZ AC ADAPTER: 220/240V 50/60HZ FILM, TIMING SLIT STRIP SPRING, TIMING SLIT STRIP FILM CLAMP, CABLE LOCK LEVER.BLADE CAP UNIT BLADE UNIT ABSORBER1, INK ABSORBER2, INK SCREW, TP M3X8 FOR AC ADAPTER FOR UPPER CASE UNIT FOR PRINT UNIT S2 S3 XB6-7300-605 XB1-2300-405 G G 4 2 (1) SCREW, TP M3X6 MM SCREW, M3X4 FOR LOGIC BOARD ASSY FOR PRINT UNIT/LF MOTOR FOR PRINT UNIT FOR TIMING SLIT STRIP FILM SPRING Yes Yes Yes Yes Yes LV HV (EUR/ASIA/AU/KR/HK/MY/TH) Yes Yes Yes Yes Description Remark In common with the i350 / i355 Yes

Power cables:
QH2-2720-000 QH2-2725-000 QH2-2726-000 QH2-2727-000 WT3-5156-000 WT3-5160-000 WT3-5182-000 S S S S S S S 1 1 1 1 1 1 1 CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER 120V (LAM-LV) 100V-120V 220V-240V 220V-240V (AU) 220V-240V (GB, HK) 220V-240V (KR) 220V-240V (CHN)

10

6. TROUBLESHOOTING FLOWCHART 6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment)

Power ON

Service Call Error? No

Yes

Open access cover, and install print head

Service Call Error? No Connect to computer

Yes

Shipment inspection pattern printing

Refer to 4. SERVICE MODE regarding printing method.

< Shipment inspection pattern check items> (Refer to the attached print sample.) 1. Non-ejection of ink: 2. Top margin: 3. Line: 4. Gray area: Yes Outside of paper Not connected White lines / uneven density NG NG NG NG

Correct? Yes

No

Replace print head and print shipment inspection pattern

Correct? Yes

No

Waste ink counter less than 7%?

No

Yes

Normal

Defective

< Note for normal printer refurbishment > At refurbishment, install the print head, and while pressing and holding the Power button, connect the AC plug. After the LED lights in green, while holding the Power button, press the Resume/Cancel button 2 times, and release the Power button. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.) With this condition, print the shipment inspection pattern and reset the EEPROM in accordance with 4. SERVICE MODE, EEPROM reset / Destination setting. Since the printer enters the shipping mode (carriage in replacement position, paper lifting plate raised) by powering off using the Power button, remove the print head, unplug the power cord, and do not print afterwards. 11

6-2. Print Head Troubleshooting Flowchart (print head operation confirmation)

Connect to computer

Nozzle check pattern printing

Refer to 4. SERVICE MODE regarding printing method.

Correct? No Print head cleaning

Yes

Refer to 4. SERVICE MODE regarding cleaning method.

Nozzle check pattern printing

Correct? No Print head deep cleaning

Yes

Refer to 4. SERVICE MODE regarding cleaning method.

Nozzle check pattern printing Yes

Correct? No Print head deep cleaning

Nozzle check pattern printing Yes

Correct? No Replace ink tanks

Nozzle check pattern printing

Correct? No

Yes

Defective

Normal

12

7. SPECIAL NOTES ON SERVICING IN ASIA - Elimination of Major Component Connectors on the Logic Board Assy In the iP1000, the LF and CR motors are soldered to the logic board assy, and the connectors which were used in prior models are eliminated. In addition, the CR flexible cable is soldered to the print head to eliminate the connector. (However, in peak periods of production, instead of soldering, the connector may be used for the CR flexible cable on the print head side.)
<Special notes on servicing> In replacing the logic board assy, remove the solder from the backside of the logic boards LF and CR motor cable connections, and re-solder them to the replaced logic board assy. Regarding the CR flexible cable, as there is no service part setting, no solder removal or re-soldering of the cable itself is required. Logic Board Assy

CR Flexible Cable (Print Head Side)

13

8. PRODUCT TECHNICAL INFORMATION 8-1. FAQ (Problems specific to the iP1000 and corrective actions)
Possible Call / Claim Corrective action - LED blinks alternately in orange and Remove the packing material fixing the green, 2 times (carriage error). carriage.

No. 1

* A

Function Phenomenon Installation Carriage error (LED blinks alternately in orange and green 2 times).

Ink tank installation error (LED blinks in orange 4 times.)

Cause The user may not have removed the packing material at unpacking and installation. Although a caution sheet is packaged together with the printer, the user may not have noticed it. Note: Even if the packing material remains, no parts are damaged. Open the access cover, and install the ink Since the user did not seat the ink tanks - LED blinks in orange 4 times (ink tanks properly. completely at unpacking, installation, and tank installation error). (As this ink tank replacement, the ink tank occurs at printer installation, the user contacts the main case. cannot recognize the error.) - Paper out error - Paper cannot be fed - Cannot print 1. 2. 1. 2. 3. 1. 2. 1. - Multiple pages of paper are fed simultaneously. -Blank paper is ejected. - Paper out error - Paper cannot be fed - Cannot print - Paper jam error - Paper cannot be fed - Cannot print - Paper jam error - Paper cannot be fed - Cannot print 1. Reduce the number of pages loaded in the ASF. 2. Flatten curled paper.

Paper feeding

No paper feeding when a number of sheets are loaded. (PR-101)

Multi-feeding

Envelope not feeding

Envelope jam at feeding

Paper jam

When the paper is curled and many sheets are loaded, the loaded page limit level in the ASF creates friction at paper feeding. In the high temperature and high humidity Fan the paper and set them in the environment, the frictional force between ASF. In case of PR-101, set the paper sheet the front and back sides of paper becomes high, and sheets stick to each by sheet in the ASF. other, contributing to multi-feeding. Perform roller cleaning from the printer The paper feed roller slips on the paper at paper feeding. driver. Note: Depending on the paper lots. This Reduce the number of envelopes phenomenon may occur in DL loaded in the ASF. envelope. Flatten the envelope (with a pen). Perform roller cleaning from the printer When the paper is fed by the slightly-slippery paper feed roller, the flap driver. is caught in the return position of the Reduce the number of envelopes claw. loaded in the ASF. Remove the jammed paper from the As the LF roller slips on the paper, the paper pick-up side. paper is not fed, causing the jam error at paper ejecting.

14

(8-1. FAQ (Problems specific to the iP1000 and corrective actions) contd)
Possible Call / Claim - Smear on the printed side of paper - Cannot print properly - Paper edge crease Cause The edge of paper rises due when paper is curled, causing the print head to rub against the printed surface of paper, resulting in smearing.

No. 8

* B

Function Image quality

Phenomenon Smearing on printed side.

Smearing on the backside (or address side) of postcards

Corrective action 1. Correct the paper curl. 2. Recommend the user to conduct printing in the print quality assurance area. (In the iP1000, the head-to-paper distance cannot be changed.) Note: In borderless printing (to 4x6 or 5x7), correct the paper curl. Clean the ribs on the platen with cotton swabs/buds. When borderless printing is conducted continuously, ink mist attaches to the ribs on the platen, and is transferred to the backside of the following paper.

10

Horizontal lines or uneven print density at the trailing edge of paper

<When printing the address side of postcards> - Smears on the address side <When printing the message side of postcards> - Smears on the backside Recommend printing in the print quality - Cannot print to the bottom edge of assurance area. paper - Lines or uneven print density appear in the trailing edge of paper - Cannot print properly - Lines or uneven print density (on skin tones and background) - Cannot print properly

11

Horizontal lines or uneven print density due to LF roller feeding at small pitch

When the paper end comes off the pinch roller, printing is performed without the paper being held, preventing the ink drops from being ejected in the correct positions, resulting in unevenness. Note: The problem is less noticeable than that of the i320. Change the print quality from standard to As the print media slightly slips while high mode. being fed by the LF roller, printed areas overlap, causing the problem.

*Occurrence level: A: The phenomenon is likely to occur frequently. (Caution required). B: The phenomenon may occur under certain conditions, but likeliness is assumed very low in practical usage. C: The phenomenon is unlikely to be recognized by the user, and no practical issues are assumed.

15

8-2. Major Functions (1) Borderless printing (4x6, 5x7 size only) The iP1000 supports borderless printing only for 4x6 and 5x7 size paper. Borderless printing is not supported with other paper sizes (A4, LTR, etc.).
< Possible problems with this function > - Smearing on the address side of postcards in continuous borderless printing on the message side. -> Clean the ribs on the platen. - Smearing on the backside of paper in continuous borderless printing. -> Clean the ribs on the platen. - Ink mist on the platen. -> Clean the ribs on the platen (2) No paper selection lever The printer does not need adjustment via a paper selection lever. (Adjustment of the head-to-paper distance when printing envelopes is not necessary.) < Possible problems with this function > - The head rubs against the paper when the amount of paper curl is large. -> Flatten curled paper (to less than 3 mm). -> In print modes other than borderless printing, conduct printing in the print quality assurance area of the top and bottom edges. (Top margin 28 mm, bottom margin 26.5 mm) (3) Quiet mode The printer has a quiet mode function. Compared with the normal mode, Acoustic noise level: Slightly lower. (HQ, normal: Approx. 48 dB, Quiet: Approx. 47 dB) Audible overtone level: Sound quality changes, and sound becomes quieter. Print speed: Slows. (BK printing in HQ/HS mode using an acoustic noise measurement pattern: Approx.1.3 times) (4) Remaining ink level detection function The printer has a function to detect the remaining ink level. (Default setting: ON) Detection method: Dot counting (Counted for each BK/CL ink tank) CL tank: The remaining ink level is detected by total counted dot values of 3 colors of ink. Display method: Displayed on the Status Monitor (at 3 levels listed below for each BK/CL ink tank) Level 1: Half level of remaining ink level (Approx. 40% of ink remaining) Level 2: Indication of ! mark (Approx. 10% of ink remaining) Lever 3: Indication of ? mark (Remaining ink level is unknown, ink may be used up anytime) Note: Remaining ink detection function displays the status only, and does not cause errors. Accuracy: The margin of error of detection accuracy is +/-10% in normal printing. The margin of error is likely to be large in the following specific print patterns: When printing continuously using any one of the CMY colors of ink -> As the remaining ink level is calculated by total counted dot values of 3 colors of ink, if any of the C/M/Y inks is heavily consumed, the margin of error for remaining ink increases. When performing continuous BK solid printing -> With continuous printing, ink flow from the tank to the ink chamber can be interrupted, after which ink remains unused in the tank.

16

Reset procedure: Perform the following operations from the printer driver utility. 1. In Low Ink Warning Setting, enable Display low ink warning. 2. In Ink Counter Reset, reset the applicable ink counter(s). Note: Be sure to reset the ink counter from the printer driver utility after replacing ink tanks. < Possible problems with this function > - Due to user error, the actual remaining ink level does not match the indicated remaining ink level, resulting in ink out, etc. User error: Forgetting to reset the ink counter / ink counter reset other than when replacing ink tanks. - Due to the specific print pattern, the actual remaining ink level does not match the indicated remaining ink level, resulting in ink out. Specific print pattern: Continuous printing using any one of the CMY colors of ink / continuous BK solid printing, etc. (5) Print head deep cleaning The printer has a print head deep cleaning (refreshing) function. Print head deep cleaning (refreshing): This is a deep cleaning function in order to resolve print failure due to ink clogging the print head. (The black ink is pigment-based, and clogs easier than other dye-based ink.) Perform from the printer driver utility. < Possible problems with this function > - Excessive ink consumption when conducting print head deep cleaning repeatedly. (The amount of ink used is approx. 10 to 15 times the normal manual cleaning amount.) < Reference > Cleaning types, amount of ink used and time required BK and CL ink drawing is simultaneously performed. Cleaning type Amount of ink used Manual cleaning BK: Approx. 0.12 g Dot count cleaning CL: Approx. 0.14 g Timer cleaning (24 hours to 2 weeks) Head replacement BK: Approx. 0.30 g Ink tank replacement CL: Approx. 0.30 g Cleaning when the print head is not capped at printer power on Cleaning on arrival at user BK: Approx. 0.45 g Timer cleaning (2 weeks to 3 months) CL: Approx. 0.45 g Print head deep cleaning BK: Approx. 1.5 g Timer cleaning (3 months or more) CL: Approx. 2.2 g

Time required Approx. 40 sec.

Approx. 45 sec. Approx. 60 sec. Approx. 70 sec.

(6) Print head alignment The printer has a print head alignment function (print head position adjustment function). Print head alignment: This is a function to correct the displacements between the nozzle lines of the print head, and incorrect print position at bi-directional printing. The adjustment is conducted using the printed head position adjustment pattern. A: Print head alignment between black nozzle lines B: Print head alignment between cyan nozzle lines C: Print head alignment between magenta nozzle lines D: Print head alignment between yellow nozzle lines E: Print head alignment between black and color printing

17

F: Print head alignment in bi-directional black printing G: Print head alignment in bi-directional color printing Perform from the printer driver utility. (At initial set-up by the user, notice to perform the print head alignment is displayed in the Status Monitor.)

18

APPENDIX 1:

SHIPMENT INSPECTION PATTERN 1

Check item 1 (Non-ejection of ink): Total area of the sample below Check item 2 (Top margin)

Print EEPROM information -> Refer to 4. SERVICE MODE for details.

BK nozzle check pattern
C nozzle check pattern M nozzle check pattern Y nozzle check pattern

Check item 3 (Gray area)

Check item 4 (Vertical lines)

Paper size: A4

19

APPENDIX 2:

iP1000 SERVICE TOOL

< How to use the iP1000 Service Tool (QY9-0065) > Usage: Shipment inspection pattern printing Destination setting in EEPROM EEPROM reset Supported OS: Windows 98 / ME / 2000 / XP (J/E version) : QY9-0065 Distribution method: Provided by SSIS (Download iP1000 Service Tool from software download in SSIS.) < Usage procedures > 1. Unzip iP1000tool_V100.EXE. (Double-click to unzip the file.) 2. Open the iP1000tool_V100 folder created after unzipping. 3. Open GeneralTool.exe.

A B C D F

4.

Select the connected USB port number from USB PORT (A).

< How to print the shipment inspection pattern > 1. Select TEST PATTERN 1 (B), and the shipment inspection pattern 1 will be printed. (Refer to APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.) < How to set the destination > 1. In SET DESTINATION (C), select the model name iP1000 (common to all destinations), and the destination will be set. 2. Click DEVICE ID (D), and confirm the model name indicated in the (E) area. Or, confirm the model name on the shipment inspection pattern printout. < EEPROM reset > After marking the EEPROM CLEAR check box, perform the shipment inspection pattern printing. The EEPROM will be reset. (When the waste ink counter is re-set, it is not re-set to zero, but to 3,000mg.)

20

 , Canon ( ) , . , . - ( ). - iP3300, . . , .

, .

 - , .

 iP1500 - , , , , , ( ), , .

- ( ).

, iP1000 - ( , ) .

- ( ).

, ( ) . ( ), , , , - , , ... . - , .

 ( ) . - ( ), , : 1. ( , , , ), , - , , . , , , , . 2. , , ( , , , ). , .

CANON PIXMA IP1000