54LS03 DM54LS03 DM74LS03 Quad 2-Input NAND Gates with Open-Collector Outputs

June 1989

54LS03 DM54LS03 DM74LS03 Quad 2-Input NAND Gates with Open-Collector Outputs
General Description
This device contains four independent gates each of which performs the logic NAND function The open-collector outputs require external pull-up resistors for proper logical operation

Pull-Up Resistor Equations

Features
Y

VCC (Max) b VOL RMIN e IOL b N3 (IIL) Where N1 (IOH) e total maximum output high current for all outputs tied to pull-up resistor N2 (IIH) e total maximum input high current for all inputs tied to pull-up resistor N3 (IIL) e total maximum input low current for all inputs tied to pull-up resistor

Alternate Military Aerospace device (54LS03) is available Contact a National Semiconductor Sales Office Distributor for specifications

Connection Diagram
Dual-In-Line Package

TL F 6344 1

Order Number 54LS03DMQB 54LS03FMQB 54LS03LMQB DM54LS03J DM54LS03W DM74LS03M or DM74LS03N See NS Package Number E20A J14A M14A N14A or W14B

Function Table
Y e AB Inputs A L L H H B L H L H Output Y H H H L

H e High Logic Level L e Low Logic Level

C1995 National Semiconductor Corporation

TL F 6344

RRD-B30M105 Printed in U S A

Absolute Maximum Ratings (Note) If Military Aerospace specified devices are required please contact the National Semiconductor Sales Office Distributors for availability and specifications
Supply Voltage 7V Input Voltage 7V Output Voltage 7V Operating Free Air Temperature Range b 55 C to a 125 C DM54LS and 54LS DM74LS 0 C to a 70 C Storage Temperature Range
b 65 C to a 150 C

Note The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed The device should not be operated at these limits The parametric values defined in the Electrical Characteristics table are not guaranteed at the absolute maximum ratings The Recommended Operating Conditions table will define the conditions for actual device operation

Recommended Operating Conditions

DM54LS03 Nom 5 Max 55 Min 4 75 2 07 55 4 125 0

DM74LS03 Nom 5 Max 5 25

Units V V 08 55 8 70 V V mA C

45 2

Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Symbol VI ICEX VOL Parameter Input Clamp Voltage High Level Output Current Low Level Output Voltage Conditions VCC e Min II e b18 mA VCC e Min VO e 5 5V VIL e Max VCC e Min IOL e Max VIH e Min IOL e 4 mA VCC e Min II IIH IIL ICCH ICCL Input Current Input Voltage Max VCC e Max VI e 7V VCC e Max VI e 2 7V VCC e Max VI e 0 4V VCC e Max VCC e Max 08 24 DM54 DM74 DM74 0 25 0 35 0 25 Min Typ (Note 1) Max
b1 5

Units V mA

100 04 05 04 01 20
b 0 36

mA mA mA mA mA

High Level Input Current Low Level Input Current Supply Current with Outputs High Supply Current with Outputs Low

16 44

Switching Characteristics at VCC e 5V and TA e 25 C (See Section 1 for Test Waveforms and Output Load)
RL e 2 kX Symbol Parameter Min tPLH tPHL Propagation Delay Time Low to High Level Output Propagation Delay Time High to Low Level Output 6 3 CL e 15 pF Max 20 15 CL e 50 pF Min 20 4 Max 45 20 ns ns Units

Note 1 All typicals are at VCC e 5V TA e 25 C

Physical Dimensions inches (millimeters)

Ceramic Leadless Chip Carrier Package (E) Order Number 54LS03LMQB NS Package Number E20A

14-Lead Ceramic Dual-In-Line Package (J) Order Number 54LS03DMQB or DM54LS03J NS Package Number J14A

Physical Dimensions inches (millimeters) (Continued)

14-Lead Small Outline Molded Package (M) Order Number DM74LS03M NS Package Number M14A

14-Lead Molded Dual-In-Line Package (N) Order Number DM74LS03N NS Package Number N14A

54LS03 DM54LS03 DM74LS03 Quad 2-Input NAND Gates with Open-Collector Outputs

Physical Dimensions inches (millimeters) (Continued)

14-Lead Ceramic Flat Package (W) Order Number 54LS03FMQB or DM54LS03W NS Package Number W14B

LIFE SUPPORT POLICY NATIONALS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION As used herein 1 Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user
National Semiconductor Corporation 1111 West Bardin Road Arlington TX 76017 Tel 1(800) 272-9959 Fax 1(800) 737-7018

2 A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness

National Semiconductor Europe Fax (a49) 0-180-530 85 86 Email cnjwge tevm2 nsc com Deutsch Tel (a49) 0-180-530 85 85 English Tel (a49) 0-180-532 78 32 Fran ais Tel (a49) 0-180-532 93 58 Italiano Tel (a49) 0-180-534 16 80

National Semiconductor Hong Kong Ltd 13th Floor Straight Block Ocean Centre 5 Canton Rd Tsimshatsui Kowloon Hong Kong Tel (852) 2737-1600 Fax (852) 2736-9960

National Semiconductor Japan Ltd Tel 81-043-299-2309 Fax 81-043-299-2408

National does not assume any responsibility for use of any circuitry described no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications