Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 360 views

    Burner Alignment

    Uploaded by

    Đào Hùng
    The document describes a burner alignment system that uses a laser and target to help position burners following a shutdown. The system includes a laser mounting base that ensures the laser beam is parallel to the burner centerline. A target is placed in the kiln's center to receive the laser beam and features a large, easy-to-see marking to aid alignment. The target is mounted on a three-armed, self-centering assembly to accurately center it on the kiln's centerline.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Burner Alignment

    Uploaded by

    Đào Hùng
    360 views2 pages
    The document describes a burner alignment system that uses a laser and target to help position burners following a shutdown. The system includes a laser mounting base that ensures the laser beam is parallel to the burner centerline. A target is placed in the kiln's center to receive the laser beam and features a large, easy-to-see marking to aid alignment. The target is mounted on a three-armed, self-centering assembly to accurately center it on the kiln's centerline.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a burner alignment system that uses a laser and target to help position burners following a shutdown. The system includes a laser mounting base that ensures the laser beam is parallel to the burner centerline. A target is placed in the kiln's center to receive the laser beam and features a large, easy-to-see marking to aid alignment. The target is mounted on a three-armed, self-centering assembly to accurately center it on the kiln's centerline.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    360 views2 pages

    Burner Alignment

    Uploaded by

    Đào Hùng
    The document describes a burner alignment system that uses a laser and target to help position burners following a shutdown. The system includes a laser mounting base that ensures the laser beam is parallel to the burner centerline. A target is placed in the kiln's center to receive the laser beam and features a large, easy-to-see marking to aid alignment. The target is mounted on a three-armed, self-centering assembly to accurately center it on the kiln's centerline.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Burner Alignment System

    To assist in nding the optimal burner position following a shut down

    Features and Benefits


    The laser mounting base is designed for a minimum of a three point physical contact for each burner tube end conguration. When this physical contact is maintained the laser base provides an accurate mount for the factory adjusted bore sight laser to project a beam parallel to the centerline of the burner. The base has a 0.500 inch diameter bore which requires the largest adaptor provided with the slighter.

    A target was the special equipment designed to be located in the middle of the kiln to receive a laser ray of a pointer being shot through the pipe of a burner or attached to a special xture mounted on the nose of the burner. The target would be sturdy, easy to use, and able to withstand repeated use. The main target area was designed to be large and easy to see from a distance.

    Manually hand cranked gears deploy three arm system Arms deploy equally to automatically locate the middle of the kiln in the center of the target. Fabricated from lightweight aluminum Easy to set up, move, and store One target can be used for several different kilns Target decal measurement in centimeters Large black decal is visually easier to see

    The laser target is a three armed self centering assembly that accurately centers the target on the centerline of the kiln. Please refer to separate set up directions provided with the unit. For burner tube adjustment using the laser slighter, the target assembly should be placed 25-30 yards/meters up the kiln from the laser beam source.

    You might also like