1 Week: Duration: 3 Hrs (Monday To Friday)

Embedded System
Duration: 3 hrs (Monday to Friday)
1st Week
1st Day Introduction to Embedded System Tool Hardware tool and Software tool Introduction Board on which we have to work (MAB 51 / NANO / Universal) Concept of Digital Electronics and Analog Electronics 2nd Day Introduction to Microcontrollers based System designs What is a Microcontroller? Microcontroller and microprocessor Evolution and information about latest microcontrollers 8/16/32 bit microcontrollers Latest microcontrollers and technology trends 3rd 4th Day 8051 Architecture 8051 Block diagram and description Oscillator circuits, SFRs Port Pin description Internal Memory, External Memory Counters and Timers Interrupts Resister bank & stack / 8051, stag bit & PSW 5th Day Programming in Embedded C How to operate KEIL Software How to downloading of code in microcontroller Interfacing of LED with Microcontroller on different port in different ways ( LEDs) Simple ON, OFF program.
2nd Week
Simulation & Implementation on Hardware with microcontroller 1st Day Program in C language a) Program to toggle on LED b) Program for alternate glowing of the 8 LEDS c) Program for left shifting on LEDS d) Program for right shifting on LEDS e) Program for Counting 0 to 9 on LEDS f) Program for Counting 0 to 99 on LEDS g) Program to Count no of zeros in a given data & display output on LEDS h) Display pattern 0110 , 0011 , 1001 , 1100 , on LEDS i) Alternate glow of LEDS by using timers
j) Shifting of LEDS by using timers with 1 sec delay 2nd Day Interfacing of DIP Switch / Push switch with Microcontroller Program how to make ON & OFF LED through DIP Switch Controlling of LEDs in Different pattern through switches a) Toggle LED by DIP switches b) Controlling of shifting of LEDS by switches c) Incrementing & decrementing the numbers on seven segment by switches d) Programs of gates on LEDS by switches 3rd Day Interfacing of 7 Segment with Microcontroller Program in C language a) Count 0 to 9 on seven- segment display b) Count 0 to 99 on seven- segment display c) Count 0 to 999 on seven- segment display d) Count 0 to 9999on seven- segment display e) Program to display character on 7 Segment with key switches f) Display of 0 to 9 on seven segment by timers with 1 sec delay g) Display of 0 to99 on seven segment by timers with 250ms sec delay 4th Day Study of LCDs command & interfacing of LCDs with Microcontroller a) Display of a character on LCD b) Display of a character array on LCD c) Count 0 to 9 on LCD d) Count 0 to9 9 on LCD e) Left shifting of data on LCD f) Right shifting of data on LCD g) Display data on both the lines of LCD h) Program of gates on LCD and controlling it with switches 5th Day Interfacing of Buzzer with Microcontroller Program to turn off buzzer Interfacing of Relay with microcontroller and programming of a) Switching on/off a relay b) Switching on/off a buzzer c) Switching on/off a relay& buzzer d) Program to control any appliances through relay
3rd Week
1st Day Interfacing of Motor with microcontroller a) Programming of stepper motor at different port of microcontroller b) Control of stepper motor in different angle c) Control of stepper motor by switches Interfacing of DC Motor with microcontroller Programming in c language to a) Control of DC motor in different direction b) Control of DC motor by switches 2nd 3rd Day Interfacing of A/D conversion with microcontroller a) Programming of analysis of internal input using A/D converter & display on LCD b) Program to display any external input using A/D Conversion & display on LCD 4th - 5th Day a) Study of serial communication of microcontroller b) Implementation or program for serial communication c) Interfacing between microcontroller & PC d) Program to transfer data between PC & microcontroller in different format (Microcontroller to PC and PC to microcontroller)
4th Week
Concept of Exposure of Wireless using Microcontroller 1st 2nd Day Discussion & overview of GSM technology based on Microcontroller Implementation of AT Command (3-4) in GSM development Trainer a) Program on GSM technology how to make call b) Program on GSM technology how Receive call etc. 3rd - 4th Day Interfacing & Programming of RFID with Microcontroller a) Discussion & Overview of RFID technology based on Microcontroller b) Attendance System using RFID 5th Day Discussion & overview of GPS technology based on Microcontroller a) Study & Implementation of GPS technology b) How to calculate latitude & Longitude / UTC etc.
5th Week
1st two days PCB Design on Orcad Software
How to design schematic How to implement it on PCB Work out on 2 to 3 models.
3 Days + 6th Week

Minor Project based on above discussed technology. Lecture for how to design the Project.
Temperature sensor using 8051 (Simple identification) Temperature sensor using switches. Automatic visitor counter using 8051 & display on LCD Automatic room light Control with visitor counter Automatic password lock system using relay and 8051 Mobile Automation using DTMF Robot using Mobile DTMF Line Follower Robot Traffic light control system Sun tracking system Data and reception using RS232 protocol Display system using serial Communication Boataling plant process Automatic plant process Automatic Car parking system PC controlled Robot using RF Speed measurement of Stepper Motor or DC Motor Switch controlled Robot using 8051 Four function calculate

1 Week: Duration: 3 Hrs (Monday To Friday)

Uploaded by

Copyright:

Available Formats

1 Week: Duration: 3 Hrs (Monday To Friday)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1 Week: Duration: 3 Hrs (Monday To Friday)

Uploaded by

Copyright:

Available Formats

Embedded System

Duration: 3 hrs (Monday to Friday)

How to design schematic How to implement it on PCB Work out on 2 to 3 models.

3 Days + 6th Week

You might also like