c3d Best Practices

AutoCAD Civil 3D 2009
Best Practices
237A1-050000-PM03A
April 2008
2008 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder.
Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design|Studio (design/logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert, DWG TrueView, DXF, EditDV, Education by Design, Exposure, Extending the Design Team, FBX, Filmbox, FMDesktop, Freewheel, GDX Driver, Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, iMOUT, Incinerator, IntroDV, Inventor, Inventor LT, Kaydara, Kaydara (design/logo), LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, Reactor, RealDWG, Real-time Roto, Recognize, Render Queue, Reveal, Revit, Showcase, ShowMotion, SketchBook, SteeringWheels, StudioTools, Topobase, Toxik, ViewCube, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus, Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, Wiretap, and WiretapCentral The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner, Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, and Wire All other brand names, product names or trademarks belong to their respective holders. Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Published By: Autodesk, Inc. 111 Mclnnis Parkway San Rafael, CA 94903, USA
Contents
Chapter 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Customer Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chapter 2
Templates, Styles, and Drawings . . . . . . . . . . . . . . . . . . 3

Optimizing Drawing Templates . . . . . . . . . . . . . . . . . . . . . . 3 Using the Correct Templates . . . . . . . . . . . . . . . . . . . . . 3 Drawing Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Using Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Sample Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Style Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Copying Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Delete Layers from Drawing or Template . . . . . . . . . . . . . . 15 Setting Default Styles for New Objects . . . . . . . . . . . . . . . 16 Conceptual Visual Styles . . . . . . . . . . . . . . . . . . . . . . 17 Label Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Labeling External References . . . . . . . . . . . . . . . . . . . . . . . 21 Adding Xref Labels . . . . . . . . . . . . . . . . . . . . . . . . . 21 Xref Layer Control . . . . . . . . . . . . . . . . . . . . . . . . . 22 Managing Large Data Sets . . . . . . . . . . . . . . . . . . . . . . . . . 23 Defining Large Data Sets . . . . . . . . . . . . . . . . . . . . . . 23 Efficient Data Processing . . . . . . . . . . . . . . . . . . . . . . 24 Data Tiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
iii
Optimizing System Values, Variables, and Commands . AutoCAD System Variables . . . . . . . . . . . . Use Appropriate Data Resolution . . . . . . . . . Accessing More Windows RAM . . . . . . . . . . Simplify Profile and Section View Styles . . . . . . . . Section View Production . . . . . . . . . . . . . Maintaining Clean Drawings . . . . . . . . . . . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. 25 . 26 . 30 . 31 . 31 . 31 . 32
Chapter 3
Project Management . . . . . . . . . . . . . . . . . . . . . . . 35
Data Storage: Vault or Not . . . . . . . . . . . . . . . . . Data Referencing . . . . . . . . . . . . . . . . . . . . . . Vault References . . . . . . . . . . . . . . . . . . . . Data Shortcuts . . . . . . . . . . . . . . . . . . . . . AutoCAD Xrefs . . . . . . . . . . . . . . . . . . . . Drawing and Object Relationships . . . . . . . . . . . . . Level 1: Individual Design Objects . . . . . . . . . . Level 2: Base, Linework, and Engineering Drawings . Level 3: Production Sheets . . . . . . . . . . . . . . Digging It: Three-Level Project Structure . . . . . . . Sample Project Structure . . . . . . . . . . . . . . . User Access Controls . . . . . . . . . . . . . . . . . . . . Project Folder Structure . . . . . . . . . . . . . . . . . . . Working Folder Location . . . . . . . . . . . . . . . Sharing and Transferring Files . . . . . . . . . . . . . . . . Autodesk Vault Best Practices . . . . . . . . . . . . . . . . Single or Multiple Sites . . . . . . . . . . . . . . . . Creating Additional Vaults . . . . . . . . . . . . . . Single Vault . . . . . . . . . . . . . . . . . . . Multiple Vaults . . . . . . . . . . . . . . . . . Project Folders . . . . . . . . . . . . . . . . . . . . . Working Folders . . . . . . . . . . . . . . . . . . . . Working Folder Configurations . . . . . . . . . Autodesk Vault Project User Interfaces . . . . . . . . Prospector Tab . . . . . . . . . . . . . . . . . . Autodesk Vault Administration Tool . . . . . . Microsoft Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 . 36 . 37 . 37 . 38 . 38 . 39 . 40 . 41 . 43 . 44 . 45 . 46 . 46 . 47 . 48 . 48 . 50 . 50 . 51 . 51 . 51 . 52 . 54 . 55 . 55 . 57
Chapter 4
Surface Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Working with Large Surfaces . . . . . . . . Controlling Surface Data Resolution . Reducing the Displayed Surface Area . Working with Surface Points . . . . . . . . Filtering Point Files . . . . . . . . . . COGO Point Label Visibility . . . . . Working with LandXML Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 . 59 . 60 . 61 . 61 . 62 . 63
iv | Contents
Working with DEM Files . . . . . . . . . . . . . . . . . . . . . . . . . 63 Working with Contour Data . . . . . . . . . . . . . . . . . . . . . . . 65 Minimizing Flat Areas . . . . . . . . . . . . . . . . . . . . . . . . 66
Chapter 5
Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Site Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Multiple Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Chapter 6
Corridor Design . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Alignments . . . . . . . . . . . . . Alignment Design Strategies . Superelevation . . . . . . . . . Assemblies . . . . . . . . . . . . . . Baseline Location . . . . . . . Assembly Offsets . . . . . . . Drawing Management . . . . . . . . Corridor Code Set Styles . . . . . . . Corridor Regions . . . . . . . . . . Intersection Design . . . . . . . . . Overlapping Slope Projection Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 . 72 . 73 . 73 . 73 . 74 . 75 . 76 . 76 . 76 . 77
Chapter 7
Parcels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Creating Parcels . . . . . . . . . . . . . . . . . . . . . . . How Parcels are Defined . . . . . . . . . . . . . . . Cleaning Up Drawing Errors . . . . . . . . . . . . . Creating an Enclosed Parcel . . . . . . . . . . . . . . Right of Way (ROW) Creation . . . . . . . . . . . . Parcel Topology and Sites . . . . . . . . . . . . . . . Parcel Interaction with Alignments . . . . . . . . . . Parcel Interaction with Feature Lines . . . . . . . . . Automatic Parcel Creation . . . . . . . . . . . . . . Semi-Automatic Parcel Creation . . . . . . . . . . . Editing Parcels . . . . . . . . . . . . . . . . . . . . . . . . Adding a Boundary . . . . . . . . . . . . . . . . . . Deleting Parcels . . . . . . . . . . . . . . . . . . . . Offsetting Parcels . . . . . . . . . . . . . . . . . . . Updating ROW Parcels . . . . . . . . . . . . . . . . Labeling Parcels . . . . . . . . . . . . . . . . . . . . . . . When to Add Labels . . . . . . . . . . . . . . . . . Parcel Area Selection Label . . . . . . . . . . . . . . Quickly Editing with the Style Selection Dialog Box . Editing Parcel Line Segment Labels . . . . . . . . . . Labeling Parcel External References (Xrefs) . . . . . . Parcel Spanning Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 . 79 . 79 . 80 . 81 . 81 . 82 . 83 . 83 . 84 . 86 . 87 . 87 . 88 . 88 . 89 . 89 . 89 . 90 . 91 . 93 . 96
Contents | v
Table Tag Renumbering . . . . . . . . . . . . . . . . . . . . . . . 98 Creating Parcel Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Chapter 8
Grading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Feature Line Grading . . . . . . . . . . . . . . . . . . . . . . Site Interactions . . . . . . . . . . . . . . . . . . . . . Feature Lines . . . . . . . . . . . . . . . . . . . . Lot Lines . . . . . . . . . . . . . . . . . . . . . . Alignments . . . . . . . . . . . . . . . . . . . . . Point Types and Elevation Control . . . . . . . . . . . Split Point Elevation Control . . . . . . . . . . . Feature Line Break/Trim/Extend . . . . . . . . . . . . . Feature Line Move . . . . . . . . . . . . . . . . . . . . Feature Line Smoothing . . . . . . . . . . . . . . . . . Duplicate and Crossing Feature Lines . . . . . . . . . . Feature Line Labels . . . . . . . . . . . . . . . . . . . . Projection Grading . . . . . . . . . . . . . . . . . . . . . . . How Projection Grading Works . . . . . . . . . . . . . Boundary Representation . . . . . . . . . . . . . Case Study: Two Intersecting Gradings . . . . . . Case Study: Three Intersecting Gradings . . . . . Preparing the Footprint . . . . . . . . . . . . . . . . . Grading to Targets . . . . . . . . . . . . . . . . . . . . Grading Group Surfaces . . . . . . . . . . . . . . . . . Using Explode With Grading Objects . . . . . . . . . . Using Feature Lines and Projection Grading Together . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 . 102 . 102 . 102 . 103 . 104 . 105 . 105 . 106 . 106 . 108 . 109 . 110 . 111 . 112 . 113 . 115 . 117 . 119 . 119 . 120 . 120
Chapter 9
Pipe Networks . . . . . . . . . . . . . . . . . . . . . . . . . . 131

How the Parts Catalog Works . . . . . . . . . . . . . . Parts Catalog Management Practices . . . . . . . Standardizing Pipes and Structures . . . . . Problematic Scenarios . . . . . . . . . . . . . . . Local Catalogs and a New Part . . . . . . . Local Catalogs and a Modified Part . . . . . Part Catalogs on Different Networks . . . . Drawing Shared Between Two Companies . Creating User-Defined Optional Properties . . . . Assign Optional Properties to a Part Size . . Parts Lists . . . . . . . . . . . . . . . . . . . . . . . . . Backup Part Catalog . . . . . . . . . . . . . . . . Parts List Rules . . . . . . . . . . . . . . . . . . . Pipe and Structure Rules . . . . . . . . . . . . . . Renaming Part Size Name . . . . . . . . . . . . . Pipe Network Design . . . . . . . . . . . . . . . . . . . Networks in Profile and Section Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 . 133 . 134 . 134 . 134 . 135 . 135 . 136 . 136 . 136 . 138 . 138 . 138 . 138 . 139 . 139 . 141
vi | Contents
Managing Pipe Data . . . . . . . . . . . . . . . . . . . . . . Locating Pipe Network Parts . . . . . . . . . . . . . . . Pipe Networks that Traverse Multiple Surfaces . . . . . Renaming Pipe Network Parts . . . . . . . . . . . . . . Network Labeling Strategies . . . . . . . . . . . . . . . . . . Spanning Pipes . . . . . . . . . . . . . . . . . . . . . . Labeling Pipe External References . . . . . . . . . . . . Digging It: Display Flow Capacity with Manning Equation . Manning Equation . . . . . . . . . . . . . . . . . . . . Writing the Flow Capacity Expression . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. 143 . 143 . 143 . 144 . 145 . 145 . 146 . 147 . 147 . 149
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Contents | vii
viii
Introduction
The Best Practices guide provides an overview of best practices for implementing AutoCAD Civil 3D and using it efficiently in design operations. In addition to what this guide contains, you will find best practices in the Autodesk Civil 3D Users Guide and Moving from Land Desktop to Civil 3D. Another great source of best practices is the Autodesk Civil Engineering Community website (http://civilcommunity.autodesk.com), where you can find many usage tips, sample files, and links to other information sources.
Customer Information
Several parts of this guide include a Digging It section that describes best practices developed by AutoCAD Civil 3D users. Their personal comments and related information are provided to demonstrate how AutoCAD Civil 3D is used on real engineering projects.
Legal Notice
Certain information described in this Best Practices guide was provided by third party contributors and/or customers of Autodesk. Autodesk provides this information as is, without warranty of any kind, either express or implied.
Templates, Styles, and Drawings
Manage templates, styles, and drawings so you can work most efficiently with AutoCAD Civil 3D software.
Optimizing Drawing Templates

The drawing templates used to standardize your project drawings can be configured in several ways to support large data sets. In particular, you need a range of object and label styles for different project phases and drawing types. The following templates supplied with AutoCAD Civil 3D include styles with minimal displayed elements:

_AutoCAD Civil 3D (Imperial) NCS Extended.dwt _AutoCAD Civil 3D (Metric) NCS Extended.dwt
For example, see the surface styles _No Display and Border Only, and the profile view style First View. These are useful as is, and as a basis for developing minimal styles for other objects.
Using the Correct Templates

Make sure to design your drawing using the correct template. When you select File New to access the Select Template dialog box, a large number of templates are available. The template acad.dwt, is a default AutoCAD drawing
template. Rather than using this template (acad.dwt) to create your drawings, use customized AutoCAD Civil 3D templates.
Specify a Template to use with the QNEW Command

The normal default template for a new drawing is acad.dwt. This default template is applied when you start AutoCAD Civil 3D or open a new drawing (QNEW command). You can specify a different default template that better suits your needs. To change the default template 1 Enter Options at the command line. 2 In the Options dialog box, on the Files tab, expand Template Settings. 3 Change the value for Default Template File Name for QNEW to the template that you want to use.
Figure 1: Set the default template
4 | Chapter 2 Templates, Styles, and Drawings
NCS Templates
If your company is using the National CAD Standard (NCS), then use a template that is set up with NCS standards.
For metric data sets, use the AutoCAD Civil 3D (Metric) NCS Extended template. For imperial data sets, use the AutoCAD Civil 3D (Imperial) NCS Extended template.
Use the Appropriate Country Kit

There are 22 country kits that contain drawing requirements for specific regions. Many regions have styles that can be downloaded to ensure that drawings that local users create in AutoCAD Civil 3D meet the local submittal requirements. If you reside in a country that has an available country kit, make sure you start your project using the template file from the kit. For example, the template from the country kit for use in the UK and Ireland is called _Autodesk Civil 3D <version> UK_IE Bylayer.dwt.
Drawing Tips
The following sections describe good practices and will help avoid mistakes when getting started with drawings.
Prevent Scaling
If you are using a 3D drawing, insert your 3D survey drawing into this file. You must ensure that the units of measure are not accidentally scaled to another unit. For example, if your drawing uses imperial units, it may accidentally be scaled to metric. To prevent scaling, set the INSUNITS value to 0.
Use References to Reduce Drawing Size

Create a surface directly from the point file rather than importing the points as COGO points. This practice avoids the use of system memory to keep the point data labels up to date. Rather than starting a design in the same drawing as the surface, create a data shortcut to the surface. This practice will dramatically reduce the active drawing size.
Drawing Tips | 5
Apply Meaningful Names to Objects

Adopt a naming convention that applies useful names to differentiate objects. Because multiple people in your company may work with your drawings, it is important to use consistent and meaningful names.
Use Minimal Object Styles

For most efficient processing, use styles that have very little or no displayed elements. Minimal display styles are drawn faster, and are especially relevant for large objects, such as surfaces, point groups, and corridors. These are useful in conceptual designs, the early stages of a project, and whenever you want to suppress the display of a surface or other large object. They can also apply to other objects, subject to the nature of your drawings. Minimal styles for objects such as surfaces and corridors should be configured in both 2D and 3D display modes for efficient use. When designing corridors, in the Shape Style dialog box as shown in figure 2, you can create more efficient subassemblies by ensuring that the shape style for each one is defined with no fill, or at least a solid fill rather than hatch patterns.
Figure 2: Editing a subassembly shape style
Turn Off Labels

As with object styles, you can design separate label styles for use at different project stages, and for different audiences. An empty No Label style is useful, especially for alignments, profile views, and other objects with label sets. You can switch off all labels for an object by applying this style. You can turn off labels to reduce clutter and drawing time for some design phases. To turn off all labels for a feature: 1 Right-click the feature node on the Toolspace Settings tab. 2 Click Edit Label Style Defaults. 3 In the Edit Label Style Defaults - dialog box, set label visibility to false, as shown in figure 3.
Figure 3: Turning off label visibility for a feature
If you want to create a label design that has just the essential data and can be drawn quickly, simplify all text and graphic elements, including the use of rotation, borders, and plan readability. Another useful tactic is to leave a style in place, but temporarily edit the style with the Label Style Composer to turn off the label visibility, as shown in figure 4.
Figure 4: Turning off label visibility
Drawing Tips | 7
Use of Layers to Manage Display

For faster processing, freeze or turn off the drawing layers that contain objects. By default, design objects and their labels are divided across multiple layers. For example, as shown in figure 5, alignments, profiles, and other road design objects are spread across many layers, all beginning with C-ROAD. If you consolidate the road design objects on fewer layers, it is easier to turn them on or off.
Figure 5: C-ROAD layers
Autodesk Civil Engineering Community

Jack Strongitharm, an Autodesk Civil 3D Application Engineer for the UK and Ireland, has contributed some good ideas to this section. See Jacks blog and other AutoCAD Civil 3D blogs and discussion groups for more tips and tricks at the Autodesk Civil Engineering Community: http://civilcommunity.autodesk.com/
Using Styles
Every object has default styles and settings that you should become familiar with, and learn to configure for best results in your projects. However, it is not practical to try and master these for all objects as you learn to design with
AutoCAD Civil 3D. Instead, become familiar with the default styles for objects and labels in your template and over time modify them to suit your needs.
Create Styles for Project Stages

Create a default style for initial object creation, then others for different stages of the design process, for different users, for different types of analysis, and for final presentation purposes. For many objects, the default styles may be adequate and you will require minimal changes as your requirements evolve. As with object styles, create different label styles for different stages and purposes in the project lifecycle. During the design phase, use simple, fast-drawing labels for most objects to display only the essential data that supports the design process. Best practices for the use of styles involve making additional styles available for composite drawings, turning layers off in some contexts to hide labels, and perhaps having multiple label styles on different layers.
Sample Styles
The Sample_ styles.dwg, provided with AutoCAD Civil 3D, can be used to preview Standard AutoCAD Civil 3D styles and note the differences between them. This drawing will help demonstrate how styles can be managed and the various ways in which styles can be transferred to other drawings. Review Sample_ styles.dwg and see which styles you might want to change at the outset. Compare this drawing with other supplied drawings and assess the styles you would like to incorporate.
Style Comparison
We will compare some basic styles with more complicated styles within a single drawing and also compare a drawing template (.dwt) with a sample drawing. This exercise will help illustrate how some of the basic styles compare to a drawing that has undergone style additions and revisions. When starting out with AutoCAD Civil 3D, focus on the layout and use of the Toolspace Settings and Prospector tabs as they are critical components for style creation, control, and identification.
Sample Styles | 9
Surface Style Comparison

Open the sample styles drawing: C:\Program Files\AutoCAD Civil 3D <version>\Best Practices Guide\Sample_styles.dwg. The surface styles are designed to display different components of a surface at different design stages. The surface style assigned to the drawing is called Existing Ground Contours. This is an example of a style that would be used during the design stage of a project. In the Surface Style - Existing Ground Contours dialog box, the Border, Major Contour, and Minor Contour components are set to visible. These components determine how the surface appears in the drawing. With these components enabled, the surface is displayed as shown in figure 6.
Figure 6: Elevations and slopes are not visible
The following exercise demonstrates how to change the Existing Ground Contours style so that it reflects the Final Grade style. Editing the contour style will demonstrate how to experiment with styles to suit your requirements. To change the Existing Ground Contour style 1 On the Toolspace Settings tab, expand the Surface styles collection and double-click the Existing Ground Contours style. 2 On the Display tab, click the light bulb icons to turn off the Major Contour and Minor Contour components. 3 Click the light bulb icons to turn on the visibility for the Elevations and Slope Arrows components as shown in figure 7. Keep the Border contour set to Visible.
Figure 7: Enable the elevations and slopes components
Now the drawing displays borders, elevation differences indicated by color, and slope direction arrows and appears as shown in figure 8. The contour lines are no longer visible. These changes now reflect the components that are enabled for the supplied Finish Grade surface style.
Figure 8: Elevation colors and slope arrows for presentation
The Finish Grade style is set up to display the drawing for presentation purposes or for the latter stages of a project. Before setting up your styles you should explore the existing styles to determine what would work best for you. Remember that seemingly small style property edits can have dramatic effects in your drawings.
Style Comparison | 11
NOTE Take a conservative approach when creating styles and make additional changes only as warranted.
Parcel Style Comparison

For parcel styles, you can assign colors to differentiate between various types of parcel components. To explore parcel styles 1 In the Style_samples.dwg, on the Toolspace Settings tab, in the Parcel collection, expand the Parcel Styles collection and right-click Residential. Click Edit. 2 In the Parcel Style - Residential style dialog box, on the Display tab, the color of the parcel segments is set to blue. Observe that the parcel area fill component is visible and note the hatch pattern that is set for the parcel area fill. 3 Look at how another parcel style is composed. Click File menu New. In the dialog box, select _AutoCAD Civil 3D (Imperial) NCS Extended.dwt. 4 Observe how the style for Single-Family parcels is set up differently. Specifically, the assigned color is different and the parcel area fill is not visible. The hatch patterns for these parcel styles are also different. If you click on the hatch pattern, the Hatch Pattern dialog box is displayed, where you can change the assigned hatch pattern. The different hatch patterns for each of these styles shows one example of how different variables and combinations are possible when creating new styles or modifying existing ones.
Style Suggestions
While learning to use AutoCAD Civil 3D styles, consider the following:
Start out with as few styles as possible until you become more comfortable with the product. Track your new styles so that you can keep them straight until you can remember the visible indications for each one. Take time to explore the wide range of style components and options. You may discover useful aspects of the tools that are not readily apparent.
Only create new styles as you need them. Remember that styles should serve your designs, and are tools to help improve your drawings and facilitate the process. They should not make your job more difficult. Once you become accustomed to their use and how they are created, copied, and edited, the application of styles will greatly enhance your drawings and make your job easier.
Copying Styles
There are various ways to duplicate or copy styles between drawings and templates. This practice saves the time it would take to re-create styles.
Copy Style in Master View

You can use drag and drop to transfer styles from one open drawing or template to another. To copy a style 1 Open the Style_samples.dwg and another drawing. On the Toolspace Settings tab, select Master View. 2 Click and drag a style from one of the drawings and drop it on top of the other drawing name. In the example shown in figure 9, the Grading Standard style was selected from the Style_samples.dwg, and dragged and dropped onto the Breaklines.dwg name. 3 If the targeted drawing contains a style with the same name, the Duplicate Item Name dialog box enables you to either overwrite, rename, or cancel (skip) copying the item. You can also apply your choice (Overwrite, Rename, or Skip) to all future name conflicts during this work session. If the copied style transfers successfully, it appears when you expand the drawings style collection. No dialog box or prompt is displayed.
Copying Styles | 13
Figure 9: Use drag and drop to transfer style
Transfer Template Styles to Drawing

When you have a template file (.dwt) that contains all of your established standard styles, you can transfer them to another drawing. There is no need to redesign styles. This procedure uses a feature of Point styles, but it actually copies all styles for all object types. To copy styles from a template file to another drawing 1 On the Toolspace Settings tab, expand the Point collection Point Styles. Select one of the listed styles, right-click, and click Edit.
2 Click the Marker tab. Select the Use AutoCAD BLOCK Symbol For Marker option. Right-click in the Block list. Click Browse as shown in figure 10.
Figure 10: Browse to select the template file to transfer styles
3 In the Block Reference Selection dialog box, select *.dwt from the Files of Type drop-down menu, and browse to your template file. 4 Select the template file. Click Open and then click OK. Any style that is not contained in the current drawing will be copied from the template.
Delete Layers from Drawing or Template

From any drawing, you can delete layers that contain objects. When you create a standard template file, it is a good practice to delete the layers that you do not intend to use. To delete unwanted layers from a drawing or template file 1 At the command line, enter LayDel.
Delete Layers from Drawing or Template | 15
2 Select the drawing objects on the layers that you want to delete, or use the Name option to select the layers from the Delete Layers dialog box as shown in figure 11. 3 Press the Shift or Ctrl key to select multiple layers from the list.
Figure 11: Select layers to delete
NOTE When deleting layers from a template (DWT) file, verify that required/active styles or settings do not reference the layers.
Setting Default Styles for New Objects

If you create a new style and want to use it as a default, you can change the command settings to use this style as the default when creating new objects. You should also adhere to this practice when creating label styles. There are several ways to do this. To set a style as the default style 1 On the Toolspace Settings tab, right-click the drawing name. Click Edit Drawing Settings. 2 Click the Ambient Settings tab, and expand the General property. Set the Save Command Changes To Settings property to Yes as shown in figure 12.
Figure 12: Use command settings to set default styles
OR 1 On the Toolspace Settings tab, right-click any object collection. Click Edit Feature Settings. 2 Click the Ambient Settings tab, and expand the General property. Set the Save Command Changes To Settings property to Yes. OR 1 On the Toolspace Settings tab, right-click a specific command item in an objects Commands collection. Click Edit Command Settings. 2 Click the Ambient Settings tab, and expand the General property. Set the Save Command Changes To Settings property to Yes.
Conceptual Visual Styles

For conceptual drawings/landscape plans, you can adjust the visual style to resemble a rough sketch. To adjust the visual styles 1 Select View Visual Styles Visual Style Manager. 2 In the Visual Style Manager, select either the 3D Hidden, 3D Wireframe, Conceptual, or Realistic visual styles. 3 In the Edge Modifiers section, toggle on the Overhang and Jitter options. Overhang controls the amount of overhang (line extensions) and Jitter controls the number of lines that are drawn. 4 Experiment with these values until the style is displayed as required.
Conceptual Visual Styles | 17
This render style is scale dependent, so you may have to set an appropriate zoom level before you start the adjustment. NOTE These styles are similar to the NAPKIN command options that create sketch effects, but these adjustments do not add additional entities to the drawing, they just display the styles differently.
Transparent Surface Style

Another possible use of visual styles is to display a surface as transparent. You can create a new visual style and set the global Opacity to a small number, or you can assign different kinds of glass render materials to the different surfaces and then render the drawing.
Label Styles
This section describes best practices for working with label styles.
Editing Label Styles

The ability to edit labels within the drawing eliminates the need to locate the styles on the Settings tab. Select the Edit Label Style option for quick access to the label style editing tools. To use the Edit Label Style option 1 Select a label, right-click and click Edit Label Style. 2 This opens the <Object> Label Style dialog box as shown in figure 13 from which you can perform multiple commands to either create a new style, copy the existing style or child style, or edit currently selected style. NOTE The Label Style Composer is accessed when you select Edit Current Selection.
Figure 13: Dialog box for accessing label style editing tools
You can drag and drop styles between drawings using the Settings tab Master View. You should not copy labels themselves from drawing to drawing. If you drag a label style into the current drawing along with a label that refers to that label style and you overwrite it, you will lose the style. NOTE You can use a crossing selection to change multiple labels. Draw a crossing selection window over labels that you want to edit, and then select Label Properties. Then use the Properties palette to edit the properties of the selected labels.
Label Appearance
In your final production drawings use as few labels as possible for best performance.
Displaying Surface Elevation Cut/Fill Labels with Colors

You can create label styles for different AutoCAD Civil 3D features. The use of expressions to calculate data can greatly enhance your annotation. An example of this is the use of an expression to create a label style that uses color to distinguish between surface cut and fill volume labels. In this example, the cut volume labels are red, and the fill volume labels are green. To display cut/fill labels with distinguishing colors 1 Create a volume surface from the two surfaces you are comparing. 2 Create an expression for Surface Spot Elevation labels. Name it Negative Value. Use this expression: -1 * {Surface Elevation}. This expression takes a value, and multiplies it by negative one, changing a positive integer into a negative, or for this example, taking a negative and turning it into a positive.
Label Styles | 19
3 Create a Surface Spot Elevation label style named Cut Fill. In the Label Style Composer dialog box, on the Layout tab, change the Name property of the label component to fill. Change its color to Green. Edit the text component and change the Sign Modifier to Hide Negative Value. 4 Make a new component for the Cut value by copying the Fill text component and renaming it to Cut. Change the color to red. Edit the text component, and replace with the Negative Value expression. Change the Sign Modifier to Hide Negative Value. 5 Use the Spot Elevations On Grid command to add labels to the volume surface, using the Cut Fill style. All the spot elevations in a cut area (where the volume surface is negative) will be labeled with the red label, and all the spot elevations with a fill area (where the volume surface is positive) will be labeled with the green text. Since the negative values are hidden, and the expression is used to convert a negative into a positive (the cut), the labels automatically display the appropriate spot elevation.
Labeling High and Low Points for a Profile View Curve

Experiment with label styles to display critical information in your drawings. A good practice with profiles is to label high and low points on a profile view curve. To label high and low points on a profile view curve 1 In Toolspace, click the Settings tab. 2 Expand Profile Label Styles Curve. 3 Right-click the Curve collection and click New to create a new label style with the name Low Point. 4 Right-click Low Point and click Edit. 5 Click the Layout tab. 6 Create a new component for text by clicking Component. Create Text
7 Click on the value column for Contents and open the Text Component Editor dialog box. 8 In the Properties drop-down list, select Low Point Elevation. Click the arrow icon to add it to the label.
9 In the Text Component Editor, click at the beginning of the Low Point Elevation text properties. Press ENTER. In the Properties drop-down list, select Low Point Station. Click the arrow icon to add it to the label. The properties appear as follows: <[Low Point Station(Uft|FS|P2|RN|AP|Sn|TP|B2|EN|W0|OF)]<[Low Point Elevation(Uft|P3|RN|AP|Sn|OF)]>. Click OK to close the Text Component Editor. 10 Click the General tab and set the visibility to True. 11 Click OK to close the Label Style Composer dialog box. 12 Click a curve in a Profile View and right-click. 13 Click Edit Labels to display the Profile Labels dialog box. 14 Locate Sag Curves in Type and set Profile Sag Curve Label Style to Low Point. 15 Repeat steps 4 to 14 to create a High Point label style and assign it to a crest curve.
Labeling External References

In this release of AutoCAD Civil 3D, you can label xref data. Xrefs enable you to input data for maximum flexibility in a new environment. This section describes how to label xrefs.
Adding Xref Labels

When working with xref data, you should store the source drawing with no labels. Add the labels after you have inserted the xrefs into your current drawing. If you decide to include labels in the source drawing, they should reside on a layer that can be turned off. Xref labels from the source drawing cannot be edited. After inserting xrefs, use the labeling commands as you would for other objects.
Parcel Xrefs
The recommendation to add labels after inserting xrefs into your current drawing applies when working with parcel xrefs. Use the source drawing as a canvas for your object data and avoid the clutter of annotation. For more
Labeling External References | 21
information about labeling parcel xrefs, see Labeling Parcel External References (Xrefs) (page 93) in the Parcels chapter. NOTE All xrefs transfer into the new drawing whether they are used or not. Components always reference layers, and all layers are transferred into the new drawing.
Xref Layer Control

You can use AutoCAD commands to control the display of Xrefs. For example, you can change the color, visibility, linetype, and other properties of xref layers with the AutoCAD VISRETAIN system variable. The layer settings affected are On, Off, Freeze, Thaw, Color, Ltype, LWeight, and PStyle.
Turn Off Layer Visibility

You can turn off label visibility as long as you know what layer the labels reside on. If you xref a parcel that includes a label, you should place the area label on a layer that will not plot or on a layer that you can freeze. You can set different layer references for the area label and the parcel segments. So after you insert the xref, you can freeze the area label layer and the parcel segments will remain visible. Then if you freeze the parcel segment layer, the entire parcel will disappear. When adding labels in the current drawing to objects referenced from an xref, the labels are placed on a layer in the current drawing based on the style definition.
Save Current Layer Settings

To save your changes to layer settings, enter VISRETAIN at the command line, and set the variable to 1. This saves the current sessions changes in the current drawings layer table so that in subsequent sessions, the layer state remains set to what you want. If VISRETAIN is set to 0 (zero), the settings are not saved after you close and the drawing.
Change Color ByLayer or ByStyle

There are two methods used to change color: using object by layer and object by style. When working with xrefs, it is important to remember the following:
Xref drawings are read-only, so the only thing that you can change are the layer states.
You cannot change the xref object style or label style. You can change properties of layers. You can use the xref edit command to make edits to the source drawing. Subsequent changes to the source drawing dynamically change the xref data.
To change the color of an object, you can change the xrefs layer as long as you know what it is. Some users prefer to control ByLayer, while others prefer to use color explicitly to display an object no matter what layer it resides on. Use the method that works best for you.
Managing Large Data Sets

Any large project requires good planning to preventor at least minimizeunpleasant surprises. An AutoCAD Civil 3D project with large data sets is no different. In this case, the project team should set up its data files and configure AutoCAD Civil 3D for optimum efficiency of operations. Generating screen displays and propagating updates through a network of related objects can be very time consuming with large data sets, but there are many ways to reduce the processing time.
Defining Large Data Sets

For the purpose of this discussion, a large project includes one or more of the following data sets:

A surface with more than a million points A subdivision with more than 200 lots A corridor longer than 15 km (9.3 miles)
If your projects use smaller data sets, you can still benefit from the advice in this document to improve your work processes and your computer system performance. Implementing some of these recommendations will also enable your team to take on larger projects if the opportunity arises.
Managing Large Data Sets | 23
Efficient Data Processing

This section describes best practices to retain optimum data processing efficiency as you build up the content of a Civil 3D model. The tips and guidelines presented in this section are based on four general principles:
Groom the data so it can be processed faster. For input data such as points and surfaces, groom the data at the time of input, or before you start using it in the design process. Use data references to distribute the engineering model across multiple drawings, and to separate the production drawings from the engineering model. Minimize the display and update of objects not required in current design tasks. Reduce the frequency of automated operations such as surface rebuild, drawing save, and virus scanning, or turn off these operations.
These principles are applied at several levels of an engineering project, including the drawing settings, object styles, project management, and working with objects. Because some of the best practices involve decisions to make at the beginning of a project, it is important to read this entire section and consider how to apply the recommendations to your projects.
Data Tiling
Tiling refers to segregating a model into manageable work zones. This process facilitates working with large amounts of data, and enables better data collaboration of the design team.
Existing Ground Surfaces

The existing ground surface model of a large corridor region can be created in tiles, with one tile per drawing. The combination of tiles represents the entire project. If adjacent surface regions must be used together for plotting or analysis, use data references to bring them in. For alignment design, combine the existing ground (EG) profiles from each of the surface tiles in a single profile view to display a continuous view of the EG profile.
Large Subdivisions
The concept of tiling a model is effective in dealing with large subdivisions. The lots and corridor models can be tiled so that designers can work simultaneously on multiple tiles, or phases of the project.
Multiple Regions for Corridors

With long corridors or corridor networks, create multiple regions for modeling purposes. Normally, corridor regions are used to mark the use of different assemblies, with a region boundary occurring where the use of one assembly ends and another begins. But you can also add regions without changing assemblies. The value of additional regions is controlyou can use the Corridor Properties dialog box to turn off the modeling of regions not required for current operations, as shown in figure 14. This improves the speed of corridor rebuilding.
Figure 14: Turning off corridor regions and baselines
If your corridor includes some regions with few changes in the surface or the assembly, consider reducing the frequency of the corridor modeling in these regions to improve processing speed.
Optimizing System Values,Variables, and Commands

For better handling of large, detailed drawings, you can improve the performance of AutoCAD Civil 3D by configuring the settings for several system values, AutoCAD variables, and commands.
Optimizing System Values,Variables, and Commands | 25
AutoCAD System Variables

Among over 500 system variables to control AutoCAD behavior, there are several that you can use to improve the handling of large data sets. This section explains first how to access the system variable editor, then provides background information and recommended settings for particular variables.
Accessing the System Variable Editor

To access the AutoCAD system variable settings, enter SYSVDLG at the command line or in the Civil 3D Complete Workspace, click Express menu Tools System Variable Editor. The following dialog box is displayed as shown in figure 15, providing a convenient interface for reviewing system variable descriptions and changing their settings.
Figure 15: Setting system variables
If you have a large work group, you can create a script to run on each computer and standardize the AutoCAD settings. To do this, configure the variables on one computer, then click Save All in the System Variables dialog box. The settings are saved in an SVF file or an SCR file, each of which can be run on another computer to update settings. For more information, click Help on the System Variables dialog box.
3D Display Configuration
The display of a complex surface in 3D is memory intensive, especially if the surface includes graphic detail such as material rendering or a draped image. You can improve performance of 3D display at the expense of graphic detail, a trade-off that may be acceptable during the design process. In the final project phase, you can revise these settings to get more detailed images for presentation purposes. The main settings for 3D display are accessible when you enter the AutoCAD command 3DCONFIG. Doing this displays the Adaptive Degradation and Performance Tuning dialog box, as shown in figure 16.
Figure 16: Adaptive degradation settings
The adaptive degradation settings shown in figure 16 indicate that if the display speed drops below five frames per second, the system starts to degrade the display quality of fast silhouettes, view-dependent objects, and other items selected in the Degradation Order list. Depending on the data you are displaying and the graphics card in your computer, you may get better performance by turning off adaptive degradation.
Manual Performance Tuning

Another useful setting in the Adaptive Degradation and Performance Tuning dialog box is accessible when you click the Manual Tune button, which opens the Manual Performance Tuning dialog box. If you clear the check box for Dynamic Tessellation, shown in figure 17, you can significantly improve the display speed of pipe networks as 3D solids. With dynamic tessellation turned off, system resources are not used to store surface tessellation in memory for different zoom levels. To compensate for this setting, after you have set your 3D display to the desired zoom level, regenerate the display (REGEN) to synchronize the tessellation level.
Figure 17: Dynamic tessellation settings
Variable Settings
The following variables are useful for optimizing system performance.
GRIPOBJLIMIT
Function: Specifies the maximum number of selected objects that can display editing grips. Default setting is 100. Recommended setting: 2
HIGHLIGHT
Function: Specifies whether objects you select in the drawing are redrawn with dashed lines for easier visibility. Default setting is 1 (on), but you can set it to 0 (off) for faster selection of large, detailed objects. The 0 setting is especially effective for working with surfaces that include many contours or other lines. Recommended setting: 0
ISAVEPERCENT
Function: Controls the amount of unused space in a drawing, measured in percent. Default setting is 50. With a setting of 0 the drawing size is minimized, but every save operation is a full save. Recommended setting: 0
SAVETIME
Function: Specifies the time interval in minutes between automatic save (Autosave) operations. Default setting is 10 minutes. Recommended setting: 30 or more
Drawing Settings
Configure the following settings in your drawing templates so that they apply consistently for all drawings created from the templates.
PROXYGRAPHIC
Function: Specifies whether to save proxy graphic images in the drawing. Proxy graphics require space in the drawing file and are required only for display in applications other than AutoCAD Civil 3D. If you do not need to share drawings with users of AutoCAD or other AutoCAD-based applications, you can save space by turning off proxy graphics. If you do need to share drawings with AutoCAD users, consider using the Export to AutoCAD option, which explodes Civil 3D objects to AutoCAD primitives. Recommended setting: 0 (off).
REGENMODE
Function: Specifies whether the REGEN (regenerate) command runs automatically (1) or manually (0). REGEN can be time consuming on a large drawing, so it is advisable to run it manually, when required. Recommended setting: 0
VIEWRES
Function: Specifies the circle zoom percent value, which determines the smoothness of displayed curves. Valid values are integers from 1 to 20000; default is 1000. Setting a lower number causes faster system performance in REGEN operations. Recommended setting: try 50, then adjust up or down to suit requirements
Use Appropriate Data Resolution

Review the requirements for data precision and coverage in the final drawings and other project deliverables. Compare these with the resolution of input surface data, especially if it comes from a DEM (digital elevation model) or LIDAR (light detection and ranging) source. Ensure that your project does not contain overly detailed surfaces that require long processing time at every step. You can either purchase a lower resolution file from the vendor, or filter the file on input to reduce data density. For more information, see Filtering Point Files (page 61) in the Surface Data chapter. Look for ways to reduce the data density in non-critical regions of the project.
The project may span a wide geographic area, but the design activity is focused along a few narrow corridors. The project contains undeveloped regions, which can use surface data of a lower resolution. The project area may include large flat areas with little topographic relief. These areas too could be represented with data of lower resolution.
Accessing More Windows RAM

The Windows operating system typically does not allow an application to use more than 2 GB of system RAM. To facilitate working with large data sets, you can increase this limit to 3 GB if your computer has 4 GB or more of physical RAM installed. This change has not been tested on all system configurations, so it is not supported by Autodesk. However, you can test it with your system, and if you encounter problems, switch back to the 2 GB limit. For more information, see the document The 3 GB Switch and AutoCAD Civil 3D on the AutoCAD Civil 3D Services and Support website, at this link: http://usa.autodesk.com/getdoc/id=TS1071001.
Simplify Profile and Section View Styles

To minimize processing time, design your profile and section views on grids that use styles without excess detail. Some examples are as follows:

Turn off the minor grid lines and ticks Expand the scale of the major grid Avoid using clipped grid options Keep label text very short
Where necessary, apply more detailed styles to any of these elements for final production, but use minimal display styles in the design phase.
Section View Production

A large project often involves the need to display many section views. AutoCAD Civil 3D 2009 includes a new feature for separating the corridor model from the display of section views in a production drawing. The process is as follows: 1 In the corridor drawing, create a data reference for each alignment that is used as a baseline for the corridor. 2 In a new section view drawing, insert the alignment references, and attach the corridor drawing as an xref. 3 Create sample lines in the section view drawing, and generate the section views.
Simplify Profile and Section View Styles | 31
Maintaining Clean Drawings

As part of the project teams work process, you can use a number of standard AutoCAD operations to eliminate redundant data from project drawings.
Check for Drawing Errors

The Audit command checks for errors in an open, active drawing. To run the command, click File menu Drawing Utilities Audit.
Remove Unused Data

Two purge commands are available to remove unused data from your drawings.
The main command removes nested, unused features. To run the command, click File menu Drawing Utilities Purge. A secondary command removes unused registered applications (regapps) from a drawing. To run this command, enter -purge on the command line, then enter the command option r to remove regapps.
Locate Redundant Objects

This AutoCAD command (QSELECT) is useful for finding redundant objects in a drawing, as long as you have some idea of what to look for. For example, if you have been creating alignments and know that your drawing contains four actual alignments, you could use QSELECT to select all alignments. Then if the list includes more than four, you can delete the extra ones.
Repair Drawings
The Recover command locates, and repairs damaged data in a drawing. The command is intended to be run when you open a drawing. Click File menu Drawing Utilities Recover, select the drawing, then click Open.
Map 3D Cleanup
A powerful utility developed for AutoCAD Map 3D is also included with AutoCAD Civil 3D. It enables you to delete duplicate objects, weed polylines, and do many other cleanup actions. You can set several parameters to control each action. To access the tools, click Map menu Tools Drawing Cleanup, or enter _mapclean on the command line to access the dialog box as shown in figure 18.
Figure 18: Map 3D drawing cleanup actions
NOTE While you can run several actions together, it is recommended that you do them one at a time for better monitoring and control.
Delete Corrupt Data

If you have a drawing that is corrupted and cannot be fixed by other means, you can use the Write Block (WBlock) command to write all drawing objects to a new drawing file. This can eliminate the corrupt data, and reduce the file size. Several precautions apply when using WBlock with AutoCAD Civil 3D data:
Do not specify an insertion point, as doing that would change all the coordinate positions. If the drawing contains many Civil 3D object or large objects, you may need to use alternative methods: export the data to LandXML, and then import it into a new drawing, or Export to AutoCAD, which explodes the Civil 3D objects. If the objects are exploded and you want to re-create them, you may be able to use the exploded polylines or other simple entities as a starting point, or you may need to start from scratch.
Maintaining Clean Drawings | 33
If you also want to copy sheet layouts from the drawing, use the AutoCAD DesignCenter tool to drag-and-drop them to the new drawing.
Remove Unneeded Objects

The Zoom Extents command enables you to see whether the drawing contains any unwanted objects outside the main design area. If so, you can delete them and reduce the drawing size.
Project Management
This section describes how to organize your drawings, design objects, and work procedures to support a project team. Project management is a big picture issue that affects everyone on the team. Decisions about your project management system can have extensive, long-term consequences. The first challenge is to gain a clear understanding of the planning decisions required and the information you need to make these decisions. Visualize how a particular project management system will work when it is fully loaded with design objects, drawings, and staff members sharing files. How do you keep the system flexible and efficient while still protecting the data? A strategy that works fine with a set of 20 drawings in a month-long project can break down in a long-term project with 400 drawings. Fortunately, with AutoCAD Civil 3D you can start with a simple system and build it up or trim it down as project requirements change.
Data Storage:Vault or Not

The choice of a data storage mechanism exists because the Autodesk Vault database is supplied with AutoCAD Civil 3D. Vault provides a secure and comprehensive data management solution, but requires formal database management and usage procedures. In most cases, it also requires a dedicated server. You may want a simpler system. If so, you can store your projects in folders, and manage them in your own way. You must also establish procedures to ensure that data is not unintentionally deleted or changed. These procedures can be quite easy and safe for a small design team in which people do not need shared access to many drawings and they keep in touch with each others activities. For larger teams with a lot of design objects shared across many drawings, Vault may provide a better solution. To really settle this question, you need to
35
understand your data referencing strategy and object relationships within a typical project. To get acquainted with Vault, you can install it on a networked server or your own computer, experiment with using it, and review the documentation. You probably want to use Vault if you are interested in any of these features:

Secure document locks and version control Assignment of user roles and file access permissions down to the level of folders within projects Automated data backup and restore operations Project labeling and archiving mechanism Management of data at multiple geographic sites within a single database structure
Data Referencing
For all but the smallest projects, it is a best practice to maintain master drawings of common objects such as existing ground surfaces and alignments. These objects can be referenced into other drawings as lightweight copies of the original, requiring very little space. The practice of referencing also protects the source data from unintentional changes, because the referenced objects are read-only copies. The source data cannot be changed in the host drawing. The use of references is another way to leverage the dynamic relationships between objects. When a source object is edited, these changes automatically flow through all referenced copies in other drawings. AutoCAD Civil 3D supports three reference types:

Vault references Data shortcuts AutoCAD external references (xrefs)
Vault references and data shortcuts can be used for project surfaces, alignments, pipe networks, and view frame groups. Vault references can be used for these same objects, but also for profiles.
36 | Chapter 3 Project Management
Vault References
Vault references are used only within Vault projects, and they are restricted to use within a single project. To use these references across multiple project phases or across different engineering projects, you can create folders for separate engineering projects within a single Vault project folder.
Figure 1: Subfolders in a Vault project
As shown in figure 1, your projects NE and NW are within a single Vault project called North. Vault references can link to anywhere within the North project folder. If you need to extend these references to other projects, create new folders for these projects inside your North project working folder. Replicate the same structure in Vault, using the Autodesk Vault administration tool. Subfolders of this type can be used to group the folders for drawings and documents, but not other project objects, such as the reference links in Prospector or the Vault database files (project.xml, PointsStatus.mdb, PointsGeometry.mdb, Survey.sdb and Survey.sdx).
Data Shortcuts
Data shortcuts are intended for project management systems that do not use Autodesk Vault. This type of reference involves links from drawings to objects in other drawings, without the use of a database. Data shortcuts can be repaired if the links to the source objects are broken.
Vault References | 37
If you are unsure about your need for Autodesk Vault, start with data shortcuts. If you later decide to introduce Vault, you can import your data shortcut projects into Vault. In the process, data shortcuts are automatically converted to Vault references.
Reference Format
When you create data shortcuts from a drawing, you can choose to share all or some of the surfaces, alignments, profiles, pipe networks, and view frame groups in that drawing. The reference to each object is stored in a separate XML file. If you use the default template for data shortcut projects, all of these XML files are stored in the _Shortcuts folder for the project, separated into subfolders by object type.
AutoCAD Xrefs
AutoCAD external references (xrefs) are useful for displaying an entire drawing within another drawing as an overlay, without overly expanding the size of the host drawing. One common use of xrefs is for displaying parcels, because Vault references and data shortcuts cannot handle parcels. You can change the labels of the xref objects. However, the engineering data of the xref objects does not interact with other objects in the host drawing. For example, an alignment in an xref does not split any parcels that it crosses in the host drawing. Xrefs are compatible with all project management systems, whether they use Vault references or data shortcuts. To create an xref, click Insert menu DWG Reference and browse to the drawing that contains the objects you want to see. The objects in the xref drawing are displayed in the host drawing.
Drawing and Object Relationships

As you create data references between project drawings, you construct a network of drawings. If you are working on a large project with many people, this network can become confusing and difficult to manage. To reap the benefits of data references, it is important to plan the drawing relationships in advance, and actually create a diagram for the project team to reference.
Figure 2: Three-level project drawing structure
Figure 2 shows a sample project structure. This three-level structure can be used with Vault or with data shortcut projects. The following sections describe how to set up the different levels.
Level 1: Individual Design Objects

In the first level of the project structure, set up the source drawings that contain basic design objects such as existing ground surfaces, alignments, and parcel networks. You can either store each object in a separate drawing or you can include several related objects in a single drawing.
Level 1: Individual Design Objects | 39
One Object Per Drawing

Keeping each object in a separate drawing is recommended for large projects. This structure ensures that users can edit objects without preventing access to other objects by other users. This isolation of objects also minimizes the possibility of a user editing an object and accidentally affecting other objects in the same drawing.
Multiple Objects Per Drawing

Grouping multiple objects in a single drawing makes sense with small projects, or whenever one user is solely responsible for the entire design. For example, all of the related alignments in a subdivision design could be managed in a single drawing, and the parcel network in another drawing. This project structure reduces the number of drawings to manage, but there is a risk of accidental changes to objects.
Data Referencing
Use data references between your level 1 drawings to share read-only copies of objects such as the existing ground surface. These references can be either Vault references or data shortcuts, depending on your structure.
Explicit Naming
For each drawing, create a unique file name and save it to the designated project working folder. We recommend that you name each drawing with a clear reference to the object it contains (for example, Maple_Street_Centerline.dwg). As the number of project drawings increases, the wisdom of using explicit references in the file names becomes more apparent.
Level 2: Base, Linework, and Engineering Drawings

After you have created the design objects, you can create several types of drawings in level 2 of the workflow. These include base, linework, and engineering drawings. In a multi-user environment, engineers and designers can reference core project objects into composite drawings, keeping the drawing size small, and ensuring that core objects are not unintentionally modified. At the same time, technicians and drafters can create plan sets and production drawings as required.
Base Drawings
Base drawings, such as a utility base or grading base, are created by combining data references from level 1 drawings. You can use base drawings to show the existing conditions on a site, and then xref this drawing into a site features plan or a plan set.
Linework Drawings
Creating linework drawings is sometimes an intermediate step between developing engineering plans and base drawings. Linework drawings contain the linework and AutoCAD objects (such as lines, text, and blocks) that are used to build or represent existing conditions. Although linework drawings do not include AutoCAD Civil 3D objects, you can still add linework drawings to the project so that you can manage and reference them later on in the workflow.
Engineering Plans
Engineering planssuch as corridor designs, grading plans, or site plansresult from combining design objects to create other design objects for your project. For example, in a corridor model drawing, you can keep the drawing at a manageable size by using data references to bring in the alignment and profile from their source drawing, and the existing ground surface from its source drawing.
Level 3: Production Sheets

After you have developed the relevant base, engineering, and linework drawings, you are ready to create a production sheet or a plan set drawing, such as a plan and profile, utility sheet, or landscaping sheet. To generate these top-level sheets, xref your base, engineering, and linework plans together into a plan set drawing that can be used for generating layouts with title blocks and final drafting. If you are using Autodesk Vault, before you xref these drawings, ensure that their latest versions are in your working folder. To get the latest version of Autodesk Vault project data
In Toolspace, on the Prospector tab, right-click the project name Get Latest Version.
Level 3: Production Sheets | 41
This operation pulls the most recent versions of all project drawings and design objects into your working folder. Once you have these latest versions, you are ready to create level 3 production sheets.
Create the Plan Set Drawing

Lets assume you are working on a plan and profile sheet. First, create a new drawing, name it, and save it to your working folder. Then externally reference the appropriate level 2 drawings, such as base linework, base utility, and base topology. When you create a level 3 drawing, the level 2 object data and label styles are display-only. However, you can use Layer Manager to selectively hide and display layers within the level 2 data. If you are using Vault, be sure to use the option Include All File Dependencies when you check in the plan set drawing. This ensures that all associated file dependencies will be copied to their working folders when other team members check out the plan set drawing. You typically use a plan set drawing with Sheet Set Manager (SSM) in AutoCAD Civil 3D. To create individual sheets in SSM, you create AutoCAD views within your plan set drawings. For more information on SSM, refer to the online help in AutoCAD Civil 3D.
Additional Drafting and Annotation

You can data reference individual design objects into a plan set drawing and apply any required annotation or drafting. This process leverages the work done in level 1 and level 2 drawings. In addition, drafters and technicians can finalize the annotation for the level 3 sheets as part of a full set of construction documents.
Addressing Interference
When drawings from level 1 and level 2 are externally referenced into level 3, you may find that there are annotation overlaps, duplication, or other interferences. You can use Layer Manager to turn off interfering text, or you can create a data reference of the design object in the level 3 drawing and control its annotation there. Using this approach, the level 3 drawings can be synchronized to reflect changes that take place in lower levels. While creating references in level 3 requires some duplicate work, it is negligible compared to the benefit of the level 3 sheets being synchronized with the original design.
Working with Images

You may need to incorporate an image into a production sheet. For example, a rough grading plan sheet can include aerial photographs. To attach an image, click Insert menu Xref Manager. As an alternative, if you have installed AutoCAD Raster Design, you can access that application from the Image menu.
Bypassing Level 2
You may be able to complete some projects without using all three levels of the workflow. In particular, you may not need the intermediate drawings in level 2. Instead, you may be able to create level 3 sheets by data referencing individual objects from drawings created in level 1. The benefit of bypassing level 2 drawings is that you can create labels directly in the level 3 drawings, avoiding the possibility of generating interference. The downside of bypassing level 2 is that you cannot combine objects from level 1 to design objects such as corridors or utility networks in separate drawings.
Digging It:Three-Level Project Structure

Mike Bandich and Danny Counts of U.S. CAD originally developed the project structure described in this document. Here Mike explains how they have used and adapted the structure for different projects. After hearing about Vault for the first time in 2006, I was enthusiastic about its possibilities for project-based collaboration, explains Mike Bandich. During a break at Tech Camp, after my first introduction to Vault, I began to discuss a potential work flow with Danny. Out of that conversation arose the concept that developed into the project drawing structure. In my opinion, the concept can be applied to any civil engineering project that uses Vault with any of the shared AutoCAD Civil 3D objects. I have personally applied this structure to a range of design projects, including street improvements, sewer and storm water networks, and residential grading. We proposed the concept of one object per drawing because this model offers the greatest flexibility for project teams large and small. In practice, some project teams have decided to combine multiple objects into a single drawing. For example, some have decided to put all the horizontal control (alignments) into one drawing. Contact Mike or Danny through their corporate website (http://www.uscad.com) or by dialing 1-877-64-USCAD. See Dannys blog at http://digginginc3d.blogspot.com/.
Digging It:Three-Level Project Structure | 43
Sample Project Structure

The following table shows how data references and external references can be used to share data among the drawings of a typical project. Drawing or File
Survey.dwg Existing Ground (EG).dwg Parcels.dwg Alignment.dwg Profile.dwg Corridor.dwg (Source dwg for Corridor surface) Proposed Grade.dwg Sections.dwg Pipes.dwg EG surface EG surface, Alignment, EG profile, Finished Ground (FG) profile EG surface, Corridor surface Alignment Proposed Grade surface, Alignment Alignment EG surface, Alignment, EG profile, FG profile, Proposed Grade, Pipe Network Corridor.dwg Parcel.dwg Parcel.dwg, Existing Ground.dwg
Data References
External References
View Frames.dwg Sheet Compilation.dwg
Parcel.dwg Corridor.dwg
Sheet Set.dst
Sheet Compilation.dwg
User Access Controls

For any project team, and especially a large one, you can protect your data by creating an organized system of access permissions to project folders. Typically you assign read-write access at the project level, and then apply restrictions to sub-folders within a project. It is usually most efficient to apply permissions to user groups rather than individuals. For example, your project team could include Surveyors, Civil Engineers, and CAD Technicians.
Figure 3: Group permissions example
Figure 3 uses bidirectional arrows to signify read-write access, and unidirectional arrows to signify read-only access:
Surveyors are the only ones with write access to the folder that contains land surfaces. The Surveyors have read-only access to the folder that contains drawings of alignments, parcels, and other civil design objects. Civil Engineers have read-only access to the land surfaces and production drawings, but write access to the civil design objects. CAD Technicians have read-only access to the engineering design folder, but write access to the production drawing folder.
Access controls of this type are a standard administrative function in Autodesk Vault, and can be configured using the Autodesk Vault administration tool. If you are not using Vault, you can set permissions within the Microsoft New
User Access Controls | 45
Technology File System (NTFS), using the Sharing and Security settings at the folder level. Consult with your system administrator to set up an effective strategy. For any such strategy, it is a best practice to create several user groups or roles and configure the folder access for these groups. Individual users can be added to a group to acquire the appropriate permissions, and moved to another group if required.
Project Folder Structure

The structure of project folders is designed to keep all your documents organized and easy to find for all team members. As the number of drawings and other documents increases, the folder structure becomes more important for maintaining productivity and ensuring that nothing gets lost. The data references between drawings include path names, so the drawings must retain their names and folder locations to preserve the references.
Autodesk Vault Projects

If you are using Autodesk Vault, each time you create a project you are offered the choice of a project template, which is a standard hierarchy of named folders. It is recommended that you examine the default template (_Sample Project) and either use it or create a modified version to suit your project needs. The default location for project templates is C:\Civil 3D Project Templates. To create your own template, copy the default version, modify the folder names and hierarchy, and save it in the same directory with a different name.
Data Shortcut Projects

If you are using data shortcuts, a standard project folder structure is still a best practice. You can use the default template (_Sample Project) and create your own versions. Keep the top-level _Shortcuts folder and its object-specific subfolders as the storage location for shortcut XML files, but feel free to create other folders for drawings.
Working Folder Location

Projects in Autodesk Vault and those with data shortcut references each use the concept of a working folder for storing all projects. For data shortcut projects, the working folder contains the actual project documents. For
Autodesk Vault, the working folder contains replicas of original documents from the database. The default working folder location for both types of projects is C:\Civil 3D Projects. This location is fine if you use either Vault or data shortcuts for all your projects. However, if you work with both types of projects, you should keep the project types separate for ease of administration. One simple solution is to set your Autodesk Vault working folder to C:\Civil 3D Vault Projects and set your data shortcut working folder to C:\Civil 3D Shortcut Projects.
Sharing and Transferring Files

Several strategies are available for sharing files among members of a project team, sending files to clients, and archiving files.
Project Import and Export

Autodesk Vault provides a convenient mechanism for safely moving projects between vaults. You can select a project on the Prospector tab and export it to a single ZIP archive. This archive can be transferred as required, and then imported into another vault. The import operation is accessible on the Projects node of the Prospector tab. Besides importing Vault projects, it can import a data shortcuts project and convert all shortcuts to Vault references. If you have a few drawings with data shortcuts and you want to add these to a Vault project, you can simply add them using regular Vault operations. Broken references will be detected, but after all related drawings have been added, these references will be resolved.
eTransmit
This standard AutoCAD function can be used to send AutoCAD Civil 3D drawings and referenced objects to a client or remote team member. eTransmit is also useful for transferring drawings from one project to another. All drawings required to support the data references are automatically included in the package. The receiving computer must have the AutoCAD Civil 3D Object Enabler installed, or a full version of AutoCAD Civil 3D. TIP eTransmit is ideal for submitting finished drawings or conducting technical reviews with markups. It can also capture edits to the main drawing, and update the central version, but edits to the referenced drawings are less reliable.
Sharing and Transferring Files | 47
Autodesk Vault Best Practices

If you are using Autodesk Vault, you have several decisions to make about the configuration of vaults and projects.
Single or Multiple Sites

Choose a network architecture to match the spatial distribution of your team. Autodesk Vault can be configured for a single office site as shown in figure 4.
Figure 4: Single Site Vault architecture
Autodesk Vault can also manage project data for users at multiple geographic locations as if they were all working in the same office. This capability is provided by a multi-site option, available with Autodesk Vault at extra cost.
Figure 5: Multi-site Vault architecture
As shown in figure 5, a multi-site Vault installation involves a single instance of SQL Server managing files for two or more sites. Each databasealso referred to as a vault is typically replicated at each site to facilitate file sharing, but not all files are copied. Individual files are distributed to users as needed. SQL Server keeps track of where copies of files exist and ensures that these are updated or that users are notified of changes. Database administration tasks can be managed from any location, but occur once for the entire network. If your business is distributed across several office locations, the data management and security benefits of multi-site Autodesk Vault may be very useful. For more information, see the Autodesk Data Management Server 2009 Implementation Guide.
Single or Multiple Sites | 49
Creating Additional Vaults

Determine the optimum number of vaults for your projects. When you first install Autodesk Vault, you automatically create a single vault. This can serve as your sandbox or test database for experimenting with Vault operations. Work with sample data that you can practice deleting and restoring without worrying if something gets lost. It is a good idea to retain this test vault for ongoing purposes of training staff and testing new operations. Your database administrator uses ADMS Console to create a new vault for real project data. Each vault can store many projects, so you may not need more than one. The key point about vaults is that they are separate databases. Each user can log into only one vault at a time. Backup schedules and other administrative operations are configured separately for each vault. It is a good idea to create separate vaults for separate teams that are not sharing data. Recommended times to create a new vault for a single team are as follows:
When your existing vault is getting so large that administrative tasks are very time-consuming When you start a new set of projects that do not require data from the older projects
If necessary, at any time you can export a project from one vault and import it into another.
Single Vault
The simplest way to organize your projects with Autodesk Vault is to use a single vault to store all projects and their information. All team members have access to this one location, and you set up access control and user names only once. A single vault keeps project data centralized and easier to manage. Using a single vault for all projects makes sense for a small single office or teams that are connected via a local area network (LAN). With a single vault, you reduce both your IT and project management overhead. If your organization has multiple offices connected via a wide area network (WAN), you can still employ a single vault, but with multiple sites. For more information, see Single or Multiple Sites (page 48). A single vault can become unwieldy over time. As the amount of project data increases, so do the time and space required for backup and restore operations.
As your vault grows, you may need to archive some older projects, or create a new vault for new projects.
Multiple Vaults
Using multiple vaults right from the beginning is recommended for large organizations with several departments that use AutoCAD Civil 3D independently. Each departmentsuch as the survey, site, or highway departmentsgets its own vault. This structure makes it easier to separately manage departmental permissions and project access. Each vault can have a separate system administrator, and users can be granted access to only one vault, if necessary. If some users need access to multiple vaults, their permissions must be configured separately for each vault. Another restriction of note is that users cannot log into more than one vault at a time. Organizations with very large, multi-phased projects may want to assign a separate vault for each project for ease of project management. If you elect to partition your data into multiple vaults on a server, your project teams will see shorter project lists and have tighter control over data access. However, there are some disadvantages. Projects reside in different locations and your users have to remember multiple vault names and locations. Also, backing up and maintaining multiple vaults is more work for your IT department.
Project Folders
Create folders to organize your data and to support referencing. Within each vault, you can create any number of project folders, each using a project template, which is a standard hierarchy of folders. These Vault projects do not necessarily correspond to separate engineering projects. The key point here, as noted in Vault References (page 37), is that each drawing can be associated with only one project, and data references must remain within a project folder. Each Vault project should include all of the engineering projects that need to share data. You can always move documents between projects by clicking File menu eTransmit.
Working Folders
Understand how to use your storage location for work in progress.
Project Folders | 51
Initial Drawing Save Location

When you create a new drawing, it is a best practice to save it in the appropriate working folder. For example, if you add a new alignment drawing, save it initially to the project subfolder that includes the other alignments. The reason for doing this is that when you later add the drawing to Vault, it will be automatically directed into the correct project subfolder.
Working Folder Configurations

You can set up working folders on each client computer or on the network, as described in the following sections.
Local Working Folders
Figure 6: Local working folders
When working folders are kept on local computers, as shown in figure 6, it minimizes network traffic and accommodates team members who may work offline from the field or a home office. Users create network traffic only when they check files in or out from the vault. The disadvantage of this option is that the project files are stored on the local machine, which makes them unavailable for the backup system. In addition, using external references (xrefs) and Sheet Set Manager (SSM) to share files is a more manual process. This set-up also requires storage capacity on each local machine to accommodate the working folder.
Individual Network Working Folders
Figure 7: Individual working folders on the network
By maintaining private working folders on the server, as shown in figure 7, you protect each users work-in-progress from changes by other users. Locating these folders on the server allows for nightly backup of the data. The drawback to having individual working folders on the server is the increase in network traffic. Additionally, if you do a nightly backup of the folders, you may have a lot more data than you really need, as you may back up multiple copies of the same files in each folder.
Working Folders | 53
Shared Network Working Folders
Figure 8: Shared working folders on the network
Multiple users can share a single working folder, as shown in figure 8. This configuration may be more familiar, because many organizations already use a centralized data or projects folder for their drawings. Similar to individual working folders located on the server, a shared working folder can be backed up nightly, ensuring project data security. However, since it is a common location, the backups will be smaller in size than with the backups of individual working folders. The benefit of this configuration is that drawings with data references or external references are notified and updated every time they are saved, rather then only when they are checked back into the vault, as with the other two options. The disadvantage of the common working folder is that accidental changes can occur more easily when users work with files in the same set of folders. This approach is recommended only for small teams with members who are in close communication with each other and unlikely to be working in the same drawings.
Autodesk Vault Project User Interfaces

Work with Autodesk Vault from within an application, or by using a separate administration tool. Within AutoCAD Civil 3D, you can use the Toolspace Prospector tab to interact with Autodesk Vault. Another method is by using the Autodesk Vault
administration tool. In some situations there are distinct advantages to using one of these methods over the other. You can also check Vault files in and out from some Microsoft Office applications.
Prospector Tab
Project files and records are managed most reliably when you use the Toolspace Prospector tab to create all projects. After you create a new project, it is displayed in the Projects collection in AutoCAD Civil 3D. You can also view, edit, and manage drawings and AutoCAD Civil 3D object data stored in a vault from the Prospector tab. You should use a project template to create a standard folder structure for all of your projects. The template _Sample Project is provided with AutoCAD Civil 3D and stored by default in C:\Civil 3D Project Templates. If this template does not meet your needs, simply copy it, revise the folder names and structure, then save it with a different name in the Civil 3D Project Templates folder. Then when you create a project, your custom template will be available to select. It is easy to make multiple templates for different project types.
Autodesk Vault Administration Tool

Autodesk Vault provides a stand-alone application that enables you to manage project files and users. The Autodesk Vault tool window, shown in Figure 9, uses a table to show project files and data about these files.
Figure 9: Autodesk Vault window
Autodesk Vault Project User Interfaces | 55
In the tool window, you can see all project files, including system files such as project.xml. The window also lists all drawings where the selected file is used as a reference and displays DWF versions of the drawing files, so you can quickly find the version you need. You can use the Autodesk Vault tool to conduct many administrative activities. An Autodesk Vault administrator can delete unwanted files, set up working folders, and manage file access for individual users or groups, as described in User Access Controls (page 45). Using the Vault tool, you can restore a previous version of a file without restoring the entire project. If you need to start a new drawing using an existing drawing as the basis, you can use the Copy Design option in the Vault tool to do this without opening the source drawing.
Project Labeling
The Autodesk Vault tool also lets you label project milestones for easy identification. Firms often need to submit deliverables to a client at certain levels of completion, such as 30%, 50%, and 75% completion intervals. For a 30% complete submittal, you can label all drawings in a project 30%. When you create this new label, the most recently checked-in version of every file in the project and all reference files are assigned the label. If, at a later time, you need to restore the 30% completion project files, you can easily restore the project to this milestone by simply restoring the 30% label, instead of doing it drawing by drawing.
Pack and Go
Another helpful administrative task with the Vault tool is Pack and Go, in which a label and all of its referenced files are combined into a single package and sent to either a folder outside the vault or to an e-mail recipient. All files referenced by a selected label are automatically included in the package unless otherwise specified. Use Pack and Go functionality to

Archive a file structure Copy a complete set of files, retaining links to referenced files Isolate a group of files for design experimentation Send a data set to e-mail recipients, such as subcontractors or clients
Because Autodesk Vault allows you to store every file related to your project, such as Word documents, e-mails, and spreadsheets, you should also use the Vault tool to manage files that are not AutoCAD Civil 3D drawings. We do not recommend using the Vault tool on a regular basis to check in or check out drawings with AutoCAD Civil 3D data. In rare cases when these drawings do need to be managedfor instance, if files are lost when checked out of a projectan administrator can force a check-in of the files through the Autodesk Vault tool.
Microsoft Office
When Microsoft Office is installed on the same computer as AutoCAD Civil 3D and an Autodesk Vault client, the file menu for these three Microsoft applications is automatically customized for Vault access. An Open From Vault command and an Autodesk Vault submenu are both added to the Office button, as shown in Figure 10.
Figure 10: Vault menu added to Microsoft Word
Using these commands, you can log in to Autodesk Vault and work securely with documents without leaving the Microsoft application window.
Autodesk Vault Project User Interfaces | 57
58
Surface Data
Surfaces are essential to most design tasks in AutoCAD Civil 3D, and because of their size, it is important to structure them for efficient processing.
Working with Large Surfaces

Follow these practices for efficient processing of large surfaces. AutoCAD Civil 3D can build and store surfaces created from millions of points, but performance is often a problem for surfaces containing more than a million points. Such surfaces require a long time to build, edit, and draw. This section describes several ways to work more effectively with large surfaces.
Avoid Snapshots
With large surfaces, avoid creating surface snapshots; instead, retain the active links to point files, XML files, or other input data. The drawback of a snapshot is that it uses system memory, so it can double the amount of memory required for the surface. Snapshots are more useful with small surfaces. The presence of a snapshot results in faster surface rebuilds because AutoCAD Civil 3D references the snapshot rather than redoing the operations that created it.
Controlling Surface Data Resolution

Several methods are available to reduce surface resolution, or to create variable resolution, with higher resolution in specific areas of interest.
59
Simplifying a Surface
This surface editing process reduces the number of points on a triangulated irregular network (TIN) surface, making the surface file smaller and easier to process. You can choose from two editing methods, and you can apply the process to the entire surface or limit it to a smaller region. The two editing methods are as follows:
Point removal partitions the surface into small regions, each containing roughly the same number of points. The user-specified percentage of points is deleted from each region. To minimize the possibility of changing the surface during this operation, set a smaller value for the maximum allowed elevation change. No point will be removed if its removal would result in an elevation change larger than your set value. Edge contraction replaces the two endpoints of a triangle edge with a single point, and then redraws the triangles. This method is usually more accurate than point removal, but it takes longer to complete.
With both editing methods, points are not removed if they are on a surface breakline or border. For more information, see Simplifying Surfaces in the AutoCAD Civil 3D Users Guide.
Using a Data Clip Boundary

This boundary type defines a region of interest on a surface where you want to import a set of surface data. For example, you may want to import high-resolution LIDAR data along a corridor, but not on the surrounding surface. In this case, you draw a polyline around the corridor and define it as a data clip boundary. Then when you import the LIDAR data, it is added to the drawing inside the data clip boundary, but not anywhere else on the surface.
Reducing the Displayed Surface Area

Use a mask or boundary to suppress extraneous data from the surface display.
Apply a Mask
Use a mask to display a subset of a surface. The mask boundary can be of any polygonal shape, and you can edit the shape or move the mask around like a
60 | Chapter 4 Surface Data
viewing window. Surface redrawing is faster because areas outside the mask are not displayed. The entire surface remains in the drawing for reference in surface volume calculations, and operations such as surface rebuilds continue to process the entire surface.
Create a Boundary
To reduce the processed surface area, create a smaller outer boundary around the region of your design. Areas outside the boundary are not drawn or included in calculations, but they remain in the file, available for future use. If you later need to enlarge the boundary and restore deleted portions, simply rebuild the surface. This operation requires a valid reference to the surface definition data, so you should ensure that this link remains intact.
Working with Surface Points

Manage data files and the sequence of operations for greatest efficiency.
Referencing a Point File

Unless you need to edit points and point groups, add a point file reference to the surface definition rather than importing the point file into the drawing. This keeps the drawing smaller and easier to process. If your surface is composed from several point files, merge them into one large point file to improve performance.
Adding Breaklines First

If you add point data and breakline data (breaklines or contours) to a surface, add the breakline data first. The breaklines define specific surface features such as walls or ponds, so if they are present before points are added, the breaklines support the creation of a more accurate surface model.
Filtering Point Files

Ensure that your point file does not contain more points than required for your surface. An excessive number of points can mean a coverage area that is too large, or a point density that is too high. In either case, it requires more processing time when the surface is saved or regenerated. To avoid this situation, filter
Working with Surface Points | 61
the point file on import, limiting the number of points imported, or sampling a fraction of the points. To filter a point file on import 1 In Toolspace, on the Settings tab, expand the Point Point File Formats collection. 2 Right-click the file type you want to import Properties. 3 In the Point File Format dialog box (figure 1), set the options on the lower right to limit the total number of points and set a sampling rate.
Figure 1: Settings for point file filtering
This type of filtering often makes sense when using LIDAR data, which contains points in a dense grid.
COGO Point Label Visibility

For COGO points in a drawing, you can improve performance by turning off the point label visibility. To turn off point label visibility 1 In the Settings tree, right-click the Point collection. 2 Click Label Style Defaults. 3 In the Edit Label Style Defaults dialog box, in the Label property, change the Visibility setting to False.
Working with LandXML Files

Use settings to minimize surface file size. Before importing LandXML data to build a surface, check the LandXML settings for surface import, as shown in figure 2.
Figure 2: LandXML surface import settings
The option to create the source data (breaklines and contours) in the drawing adds 3D polylines. By turning off this option, you can make the surface file much smaller if the source data includes a lot of contours. This data is often not required for your design work with the surface.
Working with DEM Files

Understand some essential settings for digital elevation models (DEM). If you have a choice of source data for your existing ground surfaces, create grid surfaces rather than TIN (triangulated irregular network) surfaces when possible. The difference in system memory requirements is significant for large surfaces. As a general rule, a grid surface, such as a DEM, requires about one-sixth (17%) of the memory space required by the same surface in TIN format.
Exporting a DEM File

AutoCAD Civil 3D enables you to export DEM files from a surface. At the time of export, you can expand the grid spacing to make the file smaller. Figure 3 shows the menu selection used to start the export process.
Working with LandXML Files | 63
Figure 3: DEM file export
The Export Surface To DEM dialog box, shown in figure 4, is where you can set the grid spacing in the exported DEM file. A grid spacing of 2 covers a given area with one quarter the number of points required by a grid spacing of 1. Use a higher numeric setting here to create a DEM file that is smaller in size, and less detailed.
Determining Grid Point Elevation

An important export setting is the method for determining elevation at each point. You can choose to either sample the surface elevation at the grid point, or compute the average elevation from surrounding points. The latter method (averaging) is more time consuming. For greater efficiency, use the surface sampling option, as shown in figure 4.
Figure 4: Optimizing settings for an exported DEM file
Working with Contour Data

Edit your input data to include only the essential regions. Before you add contour polyline data to a surface, consider whether it includes any terrain that is not needed for design purposes. If so, you can use the AEC modify tools to crop unwanted portions of the contours. As shown in figure 5, these tools are available on the right-click menu when no objects are selected in the drawing.
Working with Contour Data | 65
Figure 5: Location of AEC modify tools
Minimizing Flat Areas

Edit surface data for greater accuracy. As surface triangles are created around contour data, erroneous flat triangles can appear in regions where contour lines follow tight curves, creating a condition where all three points of a triangle can be on the same contour. When you add contour data to a surface, it is important to understand how to use the settings for minimizing flat areas. Otherwise, the minimizing operation can run very slowly, and the resulting surface can be inaccurate. When you add contours to a surface definition, the Add Contour Data dialog box includes default settings to minimize flat areas, as shown in figure 6.
Figure 6: Default settings when adding contour data
If you add all your contour data in a single operation, use the three default settings shown in figure 6 to edit the contours and create a more accurate surface. AutoCAD Civil 3D uses these options to correct flat areas by checking the surrounding elevations, interpolating new points, and subdividing triangles. If you add contour data in two or more batches, clear the check boxes for the initial batches, so that contours are not edited based on incomplete data. When you add the final batch of contour data, select the three check boxes to correct the contours based on the full data set.
Minimizing Flat Areas | 67
68
Sites
5
The key points about a site in AutoCAD Civil 3D are as follows:

This section explains how to use sites in AutoCAD Civil 3D to manage the dynamic interaction of design objects within a project.
Site Characteristics
Objects in each site collection interact topologically with each other. A site can contain alignments, feature lines, grading groups, and parcels. An object can occupy only one site at a time. Sites can overlap or occupy the same geographic region. You can move or copy objects from one site to another Where two lines in the same site cross, they both acquire the same elevation. The line last drawn controls the elevation. This behavior affects feature lines, alignments, and parcel lot lines.
Multiple Sites
Using multiple sites provides a way to control object interactions within a single drawing. You can move or copy objects into the same site when you want them to interact, and move or copy them into separate sites when you want to isolate them.
69
Site Transparency
The fact that sites are transparent and always visible can be helpful in some situations, such as when you have soil-type parcels overlaid on a grading plan. In other situations, you might want to visibly mark the objects to indicate their site. For example, if you have two phases of a residential project in different sites, you can use the Site Properties dialog box to set the starting parcel number to 101 in one site, and 201 in the other. You can also use different object styles in each site.
Alignment Interaction
When you create alignments, you have the option of not assigning them to a site. Therefore you can keep your alignments from interacting with other site objects during the design period. After the alignment design is finished, you can move the alignments into the parcels site and work with the interactions between both object types. If you use alignments in the design of utility networks, you may want to keep these alignments in a separate site from the parcels and the road alignments. Similarly, you may want to keep your overall grading plan in a separate site from the alignments and parcels. For more information, see Site Interactions (page 102)in the Grading chapter of this guide.
70 | Chapter 5 Sites
Corridor Design
This section describes best practices for corridor design, including suggestions for the related alignment, assembly, profile, and section objects. Corridors can be the most complex, data-rich objects in an AutoCAD Civil 3D engineering design. As you develop the design, structure the data for efficient processing by AutoCAD Civil 3D so that your work is not slowed down by events such as unnecessary rebuilding operations. The large amount of data in a corridor design must also be managed carefully so that it is most useful for those who review the design and construct it on the ground.
Alignments
When creating alignments, use a naming format that identifies the real-world reference for the alignment, such as MapleSt - Edge_of_Pavement. The default names such as Alignment - 1 can get confusing as the design progresses and the number of alignments multiplies. Either type in the name of each alignment as you create it, or modify the alignment naming template to add any standard text to the name, such as project phase. Some corridors can be designed entirely from a single centerline alignment, but most require additional alignments, such as the centerlines of intersecting roads. Create these other alignments before generating the corridor if you have the design information available. Other alignments such as gutter flow lines and curb returns, can be generated from the corridor design or added later in the process.
71
Alignment Design Strategies

If you are creating an alignment from a polyline, adapt your method to the nature of the polyline. The dialog box for creating an alignment in this way includes a check box for Add Curves Between Tangents, shown in figure 1.
Figure 1: Detail from alignment creation dialog box
If you select the Add Curves Between Tangents check box, you get an alignment with free curves inserted where two straight segments joined. These free curves are easy to edit, as they retain tangency at all times. If your input polyline includes arcs, these become fixed curves in the alignment, which do not retain tangency in editing. Leaving these as fixed curves is fine if you do not need to edit them. An alternative is to delete these fixed curve subentities and insert a free curve between the adjacent entities. Then if you need to edit the alignment, the free curve retains tangency.
Entity Types
If you are laying out alignments using the drafting tools, it can be overwhelming to see the wide range of line, curve, and spiral tools. To make the correct choice, it helps to understand the difference between fixed, floating, and free entities:
Fixed entities are defined by specific points, with no topological relation to adjacent entities. In editing operations, fixed entities remain connected to adjacent entities, but can be moved out of tangency. This is the type of entity you get when you convert a polyline to an alignment. Floating entities are attached to an existing entity and remain tangent to it. Their endpoint, however is defined by other criteria, such as radius, length, a through point, or finding the best-fit path through a number of specified points. Free entities are always created between two existing entities, and always maintain tangency to them. Free entities are the most flexible in editing operations.
72 | Chapter 6 Corridor Design
Once you determine which entity type best suits your design context, you can select the appropriate line, curve, spiral, or combination based on your available design data, such as whether you have a known through point, length, or radius.
Superelevation
If you are adding superelevation to any alignments, do so before creating the corridor. Also, the superelevation data is not dynamic, so it does not update if you grip-edit the alignment. Therefore, add the superelevation after the alignment design is stable, or be prepared to redo the superelevation if the alignment is modified.
Assemblies
Assemblies are a versatile component of corridor design, with many subassemblies and structural options to choose from. Understanding these options makes it easier to design corridors for a wide range of uses.
Baseline Location
An assembly baseline is typically located in one of two places, as shown in the following figures.
Central Baseline
Figure 2: Assembly for divided roadway
The assembly in figure 2 has a baseline in the center of a ditch between two roadways. This assembly can be used for a corridor designed symmetrically along a single central baseline. However, if you are designing a corridor section
Superelevation | 73
from the gutter flow line or another outside line, it usually makes more sense to place your baseline at that location. The best practice is to set your baseline along the primary alignment that controls the corridors location.
Outside Baseline
Figure 3: Assembly for curb return
Figure 3 shows a typical assembly for the design of a curb return in an intersection. The curb return is the curved region that joins the outside edges of two intersecting alignments. The assembly shows a single road lane with a gutter, curb, sidewalk, and standard daylight. The baseline is located where the edge of pavement meets the curb, as this is the alignment that controls the design. Another common location for a curb return baseline is the back edge of the curb.
Assembly Offsets
Use an assembly offset to associate a point on a subassembly with a secondary alignment. This is especially useful in a corridor region such as a knuckle or lane widening.
Figure 4: Assembly with offset
Figure 4 shows an assembly with an offset on the curb subassembly on one side of the roadway. This offset can be associated with an alignment that defines the outside road edge as it widens to accommodate a turn lane or off-ramp.
Drawing Management
Corridor Model
In a corridor model drawing, keep the drawing at a manageable size by using data references to bring in the alignment and profile from their source drawing, and the existing ground surface from its source drawing.
Section Views
Once the corridor is designed, create a separate drawing for the section views. In this drawing, use a data reference to bring in the alignment, and use an external reference (xref) to bring in the corridor drawing. The sections can extract the required corridor data from the xref.
Profile Views
If a drawing contains several profile views, these can add significant time to the file size and processing time. Several strategies are available to minimize these effects. Especially in the initial design phase of a project, keep each profile view as simple as possible, with minimal labels and data bands, and no clipped grids. As the design progresses, you can add more construction data to the display. If you have profile views in the same drawing as a corridor, you can delete the views after you finish designing the layout profiles. The profile objects remain in the drawing for reference by the corridor, but the rebuilding operations are faster, and the drawing is a little smaller without the profile views. You can re-create the profile views as required in a production drawing, separate from the corridor. For more information, see Simplify Profile and Section View Styles (page 31).
Drawing Management | 75
Corridor Code Set Styles

In the initial planning of your corridor, examine the assemblies you are using and identify the major points and links that will need special labels or display styles for higher visibility in the design. For example, you may need to show ditch side slopes or elevations along the gutter flow line. For purposes of three-dimensional display, you may want to color the paved surfaces black and the ditches green. These controls are all available in code set styles. You can find Code Set Styles in Toolspace, on the Settings tab, by expanding General collection Multipurpose Styles.
Corridor Regions
In the initial design stages, divide each corridor into multiple regions. Create a separate region wherever the assembly changes, such as for lane widening or intersections. As the design gets more detailed, you can turn off regions you are not working in and experience faster rebuilds. In each region, set the assembly frequency and the section swath width to avoid loading the design with unnecessary data. For example, assemblies can be widely spaced along a straight roadway across flat terrain, and spaced more closely in regions with a lot of change.
Section Swath Width

Section swath width should be set to a value not much wider than the maximum corridor width between the daylight lines on each side. Avoid a swath width that takes in excessive amounts of the existing ground surface beyond the corridor.
Intersection Design
The Advanced Corridor Design Tutorials distributed with AutoCAD Civil 3D demonstrate an effective process for designing intersections or junctions. The basic sequence is as follows: 1 Modify the layout profile for the side road to match the elevations of the through road and create vertical curves where required for smooth transition in elevation across the intersection. 2 Add the side road baselines and profiles to the corridor design.
3 Remove geometry from the side road regions that cross the intersection. 4 Define curb return alignments and add these baselines to the corridor. Create assemblies for use on the curb return alignments. 5 Evaluate the drainage characteristics of the intersection surface 6 Add a boundary to the intersection surface. This process was developed by Eric Chappell and engineers at Engineered Efficiency, Inc., Itasca, Illinois, U.S.A. (www.eng-eff.com).
Overlapping Slope Projection Lines

On a corridor design with tight inside corners, slope projection lines may overlap. You can resolve this in two ways:
Insert a new subassembly in the region where the daylight lines are intersecting and increase the slope in that region. The daylight lines will intersect the surface before intersecting with each other. Create an offset alignment and profile in the region of the tight interior curve and choose a subassembly that grades to the offset feature line in this region. This design forces the connection from the hinge point to the feature line on the inside of the curve.
Overlapping Slope Projection Lines | 77
78
Parcels
This section describes best practices for parcel creation, editing, and annotation, particularly in the context of subdivision design.
Creating Parcels
This section describes parcel creation best practices.
How Parcels are Defined

Regardless of how they are created, parcels are defined by closed polylines. All lot line intersections must be closed to create correct topology for calculations of linear dimensions and parcel areas. Parcels are defined by their boundary lines, and not their area, the space inside the boundary lines. Adjoining parcels share lot lines, so if a lot line is deleted, the two previously existing parcels become a single parcel.
Cleaning Up Drawing Errors

Before you convert AutoCAD objects to parcels ensure that the objects do not contain drawing errors that will adversely affect the parcel tools. Use the AutoCAD Map 3D cleanup tools to check the objects for errors. Select Map Tools Drawing Cleanup. For more information, see Maintaining Clean Drawings (page 32)in Templates, Styles, and Drawings.
79
Creating an Enclosed Parcel

If you create a parcel from a closed area, such as a polygon that is fully enclosed in a parcel, the smaller area will be subtracted from the total area of the larger parcel. You will end up with two parcels, with one being an island parcel inside of the other as shown in figure 1.
Figure 1: Enclosed parcel subtracts area from larger parcel
80 | Chapter 7 Parcels
Right of Way (ROW) Creation

Right of way parcels can be automatically generated for parcels located along alignments. Remember the following when creating ROW parcels:
One ROW parcel is created for each selected parcel adjacent to the alignment. For example, if you choose two parcels during ROW creation, one on each side of an alignment, two separate ROW parcels will be created, not one complete parcel. These can be combined using the Parcel Union tool on the Parcel Layout Tools toolbar. You do not have to choose parcels on both sides of the alignment to generate ROW parcels. However, if you only pick a parcel on one side, only the ROW parcel on that side of the alignment will be created. If you select a parcel that is adjacent to more than one alignment, the offset value set in the dialog box will be used on all adjacent alignments. The alignment must be in the site for ROW parcels to be generated.
Parcel Topology and Sites

Parcel topology is controlled through the use of sites. Drawings may have multiple sites and sites may contain multiple parcels. Each site represents a different set of relationships (topology) between objects. Parcels must exist within a site and they interact with other objects contained in the site, such as feature lines and alignments. Any parcel segment drawn through an existing parcel will subdivide the parcel. To prevent this subdivision, you can create new parcels in a different site so that they will not be included in the same topology as the original parcels. Remember the following points when working with parcels and sites:
Each site has a site parcel that represents the extents of all objects within the site. All parcels within a site are dynamically related to each other. However, parcels in one site are not related to parcels in a different site. While parcels within a site cannot overlap, sites can overlap, which in turn enables you to work with overlapping parcels. For example, property parcels overlapping soil mapping parcels.
Right of Way (ROW) Creation | 81
Parcels can be moved to a different site, but the original relationship to the other parcels in the original site is lost. Objects within a site do not have to touch each other. You can see a complete list of sites and the parcels within them on the Prospector tab of Toolspace. Use the Copy to Site and Move to Site commands to easily rearrange where objects are located and to prevent unwanted interaction. Certain site properties such as the site parcel style are specific to the Parcels collection within a site. To edit these properties, right-click the Parcels collection under the named site collection.
Parcel Interaction with Alignments

Default Alignment Layout
When you create an alignment with the Create Alignment - Layout or Create Alignment - From Polyline dialog boxes, the default is to create the alignment with no specified site <None> as shown in figure 2.
Figure 2: Place alignment on <None> site
This setting is recommended so that your alignments do not interact with parcels when they are created. If at a later time you would like them to interact with parcels, feature lines, or other alignments, you can move or copy the alignment to a site.
Parcel Interaction with Feature Lines

When lot lines and feature lines in the same site cross, they create a split point. This point acquires the elevation of the line last editedcommonly known as the last one wins rule. To prevent this interaction, create separate sites for parcels and for the feature lines in a grading plan.
Feature Line Editing Commands

Use the feature line editing commands to edit parcel geometry and parcel elevations. To access these commands select Parcels menu Edit Parcel or Parcels menu Edit Parcel Elevations.
Automatic Parcel Creation

AutoCAD Civil 3D uses minimum frontage and default area criteria when automatically laying out parcels. It is important to note that these are minimum values, so that if either criterion is not met when creating the parcels, the software will adjust the other one so that the parcel is solved correctly. If you know your minimum area ahead of time, you can size the lots exactly by using a larger minimum frontage value. You can estimate the frontage value by taking the length of frontage you are working from, and dividing that by the number of lots. With these two values, you can use the tools to lay out the parcels as desired. Also make sure to enable Automatic Mode in the Parcel Layout Tools as shown in figure 3.
Figure 3: Set to Automatic Mode
Parcel Interaction with Feature Lines | 83
When you have a large irregularly shaped parcel to subdivide, it may create varying parcel sizes depending on the creation method used (by angle, by direction, by line). After setting the minimum area and minimum frontage, create back lot lines, and divide an area into bands or pieces where the tool will work well. The parcel automatic mode works best with symmetrical areas and regions with uniform shapes. For areas with irregular shapes or tight inside corners, use the manual layout mode.
Canceling Parcel Creation Commands

To cancel a parcel creation command while using the Parcels Layout Tools toolbar, you can press ESC, but be sure to watch the command line. If you press ESC too many times, the toolbar closes. If you simply hit ESC until the command line indicates you should select from the layout tools, you will have successfully canceled the command while keeping the toolbar open. This is also true of other AutoCAD Civil 3D toolbars. You can also press ESC to change the Parcel settings without having to close and reopen the toolbar.
Semi-Automatic Parcel Creation

You can use the Parcel Layout Tools to semi-automatically divide existing parcels. By setting a desired area, minimum frontage, and snap increment before selecting a tool, the program can assist you to lay out new parcels according to these particular constraints. To semi-automatically divide existing parcels 1 Click Parcels menu Create by Layout to open the Parcel Layout Tools. 2 Enter the values for Default Area, Minimum Frontage, and Snap Increment (optional). 3 Choose a creation tool. 4 Pick a point inside the parcel that you would like to subdivide. 5 Select start and end points of the frontage line. As you draw along the frontage, a temporary line is displayed. 6 Depending on the tool you selected (Slide Angle, Slide Direction, and so on) provide the information requested at the Command prompt.
7 Either press Enter to accept the default area, or drag your cursor along the parcel. A line is shown and a tooltip appears next to the cursor that shows the area and frontage of the current parcel line position.
Figure 4: Enter the Frontage Angle
NOTE If you turned on the snap increment, the cursor automatically jumps to the area increments that you set. However, if you try to move your cursor below the minimum frontage, the line no longer moves with it. This prevents you from creating parcels that do not match your criteria. To subdivide the parcel, click once to accept the current position of the lot line.
Semi-Automatic Parcel Creation | 85
Figure 5: Complete semi-automatic creation
Marissa Jenkinson, a Sales Applications Engineer for CADD Microsystems, Inc., (http://www.caddmicro.com) based in Alexandria, Virginia, U.S.A., has contributed content to this parcel creation section as well as to the parcel editing best practice information.
Editing Parcels
This section describes best practices when editing or altering parcel data.
Editing Lot Lines

Attached lot lines are created with the slide angle, slide direction, and swing line precise sizing tools available on the Parcel Layout Tools toolbar. You
cannot slide or swing edit regular lot lines, these commands only work with attached lot lines. When you grip an attached lot line, you will see it has a single triangle grip at one end and can be grip edited to slide it along the lot line it is attached to. When working with attached lot lines, edit single lines one at a time. The feature line editing commands that insert or edit elevation points work with attached lot lines. Feature line commands that edit the geometry such as Reverse, Insert PI, and so on do not work with attached lot lines. For more information, see the Grading Feature Line commands topic in the Help System.
Grip Editing
If you grip edit a parcel line and drag it past the Area Selection Label centroid, the parcel regenerates and may be assigned a new number and a different style. Keep track of where the centroid is while grip editing. It is recommended that you complete grip editing and configuration of parcel geometry as much as possible before you add labels.
Adding a Boundary
You can add a boundary around a selected number of parcels. The boundary is represented by a 2D polyline. To create a boundary around a selected number of parcels 1 Enter LineworkShrinkwrap at the command line. 2 Select the parcels that you want to use as a boundary and press Enter. This command draws a polyline around touching objects. If your selection includes parcels that are not touching, the boundary is drawn around each individual parcel.
Deleting Parcels
To delete a parcel, you must delete the individual parcel segments. You cannot delete a parcel by selecting its area selection label and pressing the Delete key. Also note that if you delete a segment line, the parcel as a whole no longer exists even though three of the perimeter lines still exist.
Adding a Boundary | 87
NOTE If a parcel segment is on a locked layer, you are not able to delete the segment. You must unlock the layer, and then you can delete the segment.
Offsetting Parcels
Parcels and parcel segments can be offset using the standard AutoCAD Offset command. To offset an entire parcel, select the area label when asked to pick objects. To offset just one segment of a parcel, select the segment entity when asked to pick objects. You can also offset your site parcel to see its extents and the objects it contains. To offset a site parcel 1 At the command line, enter offset. 2 Enter a small distance (for example, 2 feet). 3 Choose the Site Parcel Area Label as the object to offset. The outline of the site parcel is displayed.
Updating ROW Parcels

When you edit an alignment in AutoCAD Civil 3D, the ROW parcels are not automatically adjusted. This means that the ROW parcels are incorrect after the change, and all other adjacent parcels are outdated as well. There is a quick way to adjust these parcels. To update ROW parcels 1 Once the alignment has been edited, offset it to each side to generate a construction line representing where the ROW lines should be. 2 Grip edit the existing ROW parcel segments using OSNAPs to precisely match the new vertices of the construction line. 3 Edit any curve segment parameters using the sub-entity editor tools, which are accessed on the Parcel Layout Tools toolbar.
Labeling Parcels
This section describes best practices when labeling parcels.
When to Add Labels

It is a good general practice to create and edit your geometry before creating labels. This applies to parcels as well.
Parcel Xref Data

When you externally reference parcel data, you can add labels to them in the current drawing. You can label parcel xrefs in the same way that you would label any object. It is recommended that you do not apply labels in a source drawing that you will be externally referencing because these labels are not editable. You should insert xrefs and then label them in the current drawing. If you want to add parcel tables, you must first convert the labels to tags. For managing projects with parcel data, use parcel external references. Vault does not currently support parcel data so you must use parcel xrefs to input source data into your current drawing.
Parcel Area Selection Label

The parcel area selection label is an embedded object that cannot be deleted, as it is used to select a parcel. The parcel area selection label is distinct from other parcel area labels. The area selection label and other parcel labels are all supported by the AutoCAD Properties palette. To edit the parcel area selection label, right-click and select Edit Area Selection Label Style as shown in figure 6.
Labeling Parcels | 89
Figure 6: Parcel area selection label context menu
Quickly Editing with the Style Selection Dialog Box

To quickly edit a parcel line segment or other label object, except for parcel area selection labels, right-click and select Edit Label Style. In the Object (Parcel Line Label) Style dialog box, you can perform the following actions:

Create a new style Copy the existing style Create a child style from the existing style Edit the current style properties with the Label Style Composer
Editing Parcel Line Segment Labels

To save time, you should bulk edit multiple parcel label properties with the AutoCAD Properties palette. To bulk edit parcel segment labels 1 Click multiple segment labels in the drawing to select them. The labels are highlighted. 2 Right-click anywhere in the drawing and select Label Properties or Properties. 3 In the Properties palette, select the Line Label Style pull-down menu as shown in figure 7. You can choose from all existing parcel segment labels. NOTE The General Line Label Styles are also available for annotating parcels.
Editing Parcel Line Segment Labels | 91
Figure 7: Available parcel line label styles
The General Line Label Style can be used with parcels as well as feature lines and alignments, and can be selected from the Lines/Curves, Grading, and Alignments menus. The Properties palette also provides access to the Label Style Composer through the Edit Current Style option. This allows for more uninterrupted style property editing because you do not have to navigate to the Toolspace Settings tab. From the styles pull-down menu in the Properties palette, select Create/Edit (as shown in figure 7) to access the Object (Parcel Line Label) Style dialog box as shown in figure 8.
Figure 8: Parcel line label style options
Labeling Parcel External References (Xrefs)

The following exercise is presented to demonstrate the best way to insert and then annotate parcel data. There are three parts to the operation:
Insert an xref of the parcel drawing into a drawing that contains AutoCAD objects. Label the lot lines. Edit the resulting labels.
Labeling Parcel External References (Xrefs) | 93
Open the files: C:\Program Files\AutoCAD Civil 3D <version>\Best Practices Guide\source.dwg and C:\Program Files\AutoCAD Civil 3D <version>\Best Practices Guide\current.dwg 1 Maximize current.dwg, and select Insert DWG Reference. In the Select Reference File dialog box, navigate to source.dwg, select it and click Open. 2 In the External Reference dialog box, set Insertion Point to 0,0,0, Scale to 1,1,1, and Rotation Angle to 0. It is recommended that you set the Path Type to Relative Path.
Figure 9: Required settings for Xref labeling
3 Click OK. 4 Add labels as you would for regular data. Click Lines/Curves Add Line/Curve Labels Multiple Segment. Label all of the lines and curves that comprise LOT7 and LOT16, which are xref data. The labeling commands work as they do for regular objects. 5 Select and right-click the xref parcels and observe the xref commands that are available.
NOTE The xref data is highlighted with dashed lines when selected. The xref commands affect the corresponding labels in various ways. If you detach or bind the xref, the label is deleted and must be recreated. 6 Right-click a parcel that exists in the current drawing and note the context menu as shown in figure 10.
Figure 10: Xref object context menu
NOTE When you label xrefs, designate them as such to avoid confusion. With the Text Component Editor, add a convention to the label text for identification. This is an easy way to visually differentiate xref and native object data.
Labeling Parcel External References (Xrefs) | 95
Parcel Spanning Labels

AutoCAD Civil 3D provides parcel line and curve anchor points for the creation of useful visual cues when annotating parcels. In previous releases, workarounds were used to create crows feet to indicate the start and end points of lot lines. These extra steps are no longer necessary. The Iron Node point label style can be used to indicate where parcel lot lines meet. In the Add Labels dialog box, note the Span label style as well as the Iron Pipe label style.
Figure 11: Parcel span label with crows feet
Parcel Spanning Labels | 97
Table Tag Renumbering

In AutoCAD Civil 3D, table tag control is maintained through the Toolspace Prospector tab. While in Master View, right-click the drawing name and select Table Tag Numbering.
Figure 12: Table tag numbering option
When creating tags, duplicates are not created by default, even if the starting number for creation is set to a duplicate number. You can create duplicates by using the renumber tag command.
Figure 13: Dialog box for table tag control
Creating Parcel Tables

In AutoCAD Civil 3D, you can create tables for xref parcel data and for parcel data in the current drawing. Select Lines/Curves menu Add Tables Add Line, Add Curve, or Add Segments. When using the Create Table dialog box, use the No Tags Selected check box option to go into the drawing and select numerous labels that you want to convert to tags for table inclusion.
Creating Parcel Tables | 99
100
Grading
The surface modeling tools in AutoCAD Civil 3D software include generic ones such as points and breaklines, as well as purpose-built site grading tools for grading with feature lines and projected slopes. Understanding the strengths and limitations of each tooland learning how to use them togetheris a major part of learning best practices in grading.
Feature Line Grading Overview

This grading method involves creating a set of feature lines to define the graded region as surface breaklines, and then adjusting the elevation of key points to control the shape of the surface. This technique is ideal for wide, fairly flat areas, such as parking lots or building pads. It is also well suited to areas with rapidly changing elevations or slopes, where walls would normally be required to grade successfully. You can manually add or remove feature lines, and adjust their location in three dimensions, to achieve precise slope design. This process enables you to control water drainage, or clean up difficult geometry in areas such as the intersection of two or more slopes.
Slope Projection Grading Overview

This grading method involves projecting a slope from a feature line to an intersection with a surface, or to a specified distance, elevation, or elevation difference. This technique enables you to calculate proposed feature lines based on some criteria. A major benefit of projection grading is that the resulting grading objects remain true to the original criteria if the base feature line is edited. Additionally, the criteria can be edited and the grading model reflects the change. This technique works best when relationships between feature lines need to be maintained. This section explains some techniques for using each of these tools to get optimal results from AutoCAD Civil 3D.
101
Feature Line Grading

Feature lines are like advanced 3D polylines, with the following differences:

They support true geometric arcs. They interact with each other. Where two feature lines intersect at a point, editing the elevation of the point edits the elevation of both feature lines. They have much better editing support than 3D polylines.
Site Interactions
A site is a collection of objects that are topologically related. The object types that can be included in a site are feature lines, parcel lot lines, and alignments. A key point to remember is that when objects in the same site intersect, they acquire the same elevation at the crossing point, similar to crossing breaklines in a surface. If you want to create overlapping objects that do not interact this way, simply assign them to different sites. Lets look at some of the interaction of objects within a site.
Feature Lines
You can use multiple sites to manage grading feature lines in distinct groups. The Move to Site and Copy to Site commands are helpful in this process. For example, you can copy feature lines to another site, then lower their elevation to create a subsurface.
Lot Lines
Traditionally, lot lines are thought of as 2D representations of parcels. However, in AutoCAD Civil 3D, lot lines can also have elevations and can be used in building a grading model. Feature line editing commands are used to assign elevations, including at intermediate elevation points. Lot lines interact with feature lines, sharing elevations at common points. They can also be added to surfaces as breaklines. When you display the lot lines, you can choose to use the elevations of the objects or you can flatten the elevations to a specific elevation. This option is available in Site Properties.
102 | Chapter 8 Grading
It is not always desirable to use lot lines directly for grading work. Inserting elevation points, or intersecting feature lines with lot lines creates break points in the lot line geometry, which affects labels. A lot line crossed by a feature line is split into two segments with separate labels. On a small site, it may be acceptable to use a mix of lot lines and feature lines in your grading site, ignoring the parcels that are created.
Preventing Lot Line Interaction

You can provide greater clarity in a grading design by preventing the interaction of lot lines with feature lines, using separate sites for parcel geometry and grading features. One approach is to replace the lot lines with feature lines in the grading site. There are several methods of doing this:
If you created the lot lines from AutoCAD entities, use the same entities to create feature lines in the grading site. Copy the lot lines to the grading site, then explode these lot lines, turning them into AutoCAD entities. Then use grading tools to convert some or all of the lot lines into feature lines For a small site, trace the lot lines with AutoCAD entities to convert to feature lines, or use the Draw Feature Line command.
Alignments
Alignments do not have elevations assigned to them directly, but obtain elevations from a profile model. As with lot lines, alignments interact with feature lines in the same site. The most common problem is a split point created where a feature line crosses an alignment, and both objects acquire the same elevation at that point. Split points are more fully explained in the next section, Point Types. The recommended procedure when creating alignments is to not assign them to a site. This prevents interaction between alignments, feature lines, and parcels. In AutoCAD Civil 3D, the default alignment creation options provide this behavior.
Site Interactions | 103
Point Types and Elevation Control

The primary point that defines the geometry of the feature lines is called a point of intersection or PI. It is represented by a triangle symbol in the Elevation Editor, or when using a feature line editing command. The PI appears as a standard square grip when grip editing a feature line. Elevation points can be inserted along a feature line to define grade breaks. They do not break the horizontal geometry of the feature line. They are represented by the circle symbol for both the feature line commands and grip editing. When grip editing, an elevation point can be dragged to a different position along the feature line. Where two feature lines cross at a location where neither one has a PI point, a split point is created. This is shown in the editor with a white triangle, rather than a green PI triangle.
Figure 1: Elevation Editor, showing two split points
In Figure 1, the Elevation Editor shows the elevations for the square feature lines, including two split points where these lines cross feature lines BC and CD. In the Elevation Editor, the point symbol in the first column includes a plus sign (+) at any point that intersects with another feature line.
Split Point Elevation Control

When feature lines within the same site cross each other and create a split point, that point acquires the elevation of the feature line that was last editedcommonly known as the last one wins rule. If the other feature line has a different elevation, it gets a grade break at the crossing point. If a site contains feature lines of different styles, you can specify a priority level for each style for the purpose of controlling split point elevations. For more information, see Feature Line Site Properties in the Grading chapter of the Users Guide. At split points there is not an actual point, so you cannot directly edit the elevation. When you edit one of the feature lines, its grade runs straight through the intersection, forcing the other feature line to break at the split point. If you create a feature line from AutoCAD entities, without assigning elevations, the new line has a default elevation of zero (0). To edit the elevation of a split point directly, or to have better control over the point, you can use the Insert PI command to create a permanent point at that location on one of the feature lines.
Feature Line Break/Trim/Extend

While the AutoCAD Extend command works with feature lines, they cannot be edited with AutoCAD Break or Trim commands because feature lines are too complex. To overcome this problem, dedicated feature line Break and Trim commands have been added to the Edit Feature Lines menu and toolbar, as shown in figure 2.
Feature Line Break/Trim/Extend | 105
Figure 2: Feature line editing commands
These commands give you precise control over feature line editing operations.
Feature Line Move

When editing feature line elevations, the preferred method is to use the grading feature line tools, such as the Elevation Editor, which provides reliable controls for incrementally raising or lowering an entire line or specified points. AutoCAD commands such as MOVE and OSNAP can give undesirable results unless used carefully. For instance, an accidental OSNAP to an object at elevation 0 will set the elevation to 0. However, the AutoCAD MOVE command is the standard way to move a feature line horizontally.
Feature Line Smoothing

A feature line created from a tessellated (segmented) polyline can be smoothed to a series of curves or a true geometric arc, as shown in figure 3.
Figure 3: Comparing a smoothed line with a fitted arc
Polyline 1 on the left is smoothed in two different ways in the arcs on the right, using feature line editing commands as shown in figure 2. Line 2 was created with the Smooth command. When selected, it retains the four grips of a polyline. This type of line always retains tangency to the adjoining lines, and it can be adjusted to form a complex set of arcs, such as when you need to create an aesthetically pleasing landscape design. If you label this line, you can obtain the precise arc parameters for layout on the ground. Line 3 was created using the Fit Curve command. In this case, the three segments have been converted to a single arc. If you grip edit this arc, it does not always retain tangency with the adjoining lines. The single arc can be easier to lay out and usually results in a simpler grading design. When creating gradings from corridor feature lines, the Corridor command CreateGradingFeatureLine is very useful. As shown in figure 4, you can configure the Feature Line Creation Options to smooth the feature line when it is exported, and to create a dynamic link between the corridor and the feature line. Smoothing the feature line replaces tessellated line segments with arcs, and creating a dynamic link ensures that the feature line is updated with any changes to the corridor.
Feature Line Smoothing | 107
Figure 4: Command setting to smooth corridor feature lines for grading
Duplicate and Crossing Feature Lines

Feature lines in the same site can only have one elevation at a crossing point. If two feature lines approach within a tolerance distance of 0.0001, the points collapse to a single point. If feature lines are so close that they do not collapse but are very nearly overlapping, the topology model becomes much more difficult to represent. In these cases the model creates very small sliver enclosed areas, analogous to sliver triangles in a surface TIN model. In most cases, sliver areas are not a problem, but excessive overlapping can be difficult to model in the topology and can extend the surface processing time. In particular, this can happen when you have multiple feature lines overlapping with slightly different geometry. Also, arcs tend to have more problems than lines when resolving overlapping geometry. Keep these interactions in mind when creating feature lines for a grading plan. In general, if you are trying to represent duplicate feature lines, it is a good practice to put them in unique sites. Otherwise, visually inspect the feature lines within a site and remove any that are nearly tangent and not required. You should also remember these practices when creating lot lines and alignments.
Feature Line Labels

Feature lines are labeled using the general multipurpose line and curve label styles. The AutoCAD Civil 3D NCS Extended drawing templates contain several useful styles, including Grade Only and Slope Only.
Setting Downhill Arrows

The default behavior of the Grade Only label style shows the grade with a direction arrow that points in the forward direction of the feature line.
Figure 5: Default display of a Grade Only label on a feature line
Using an expression, you can configure the direction arrows in this label style to point in the downhill grade direction, which may be more useful. To do this, edit the Arrow component of the Grade Only style, as shown in figure 6.
Feature Line Labels | 109
Figure 6: Configuring Grade Check arrows in Grade Only label style
To set downhill grade arrows 1 In Toolspace, on the Settings tab, expand the General Label Styles Line collection. 2 Right-click Grade Only Edit. 3 In the Label Style Composer dialog box, on the Layout tab, select the Arrow component. 4 In the Direction Arrow section, click the value for Rotation Angle and select Grade Check. 5 Click OK to apply the change.
Projection Grading
A grading projection is constructed from feature lines. As shown in figure 7, the controlling feature line to which a grading is attached is called the footprint. This feature can be edited using the feature line commands. The grading projection creates another line at the outer edge, known as a daylight
line. Depending on the grading criteria, the daylight can be at a specified elevation, distance, or where the grading meets the existing surface. The daylight line is controlled by the grading object and cannot be edited directly.
Figure 7: Parts of a grading object, shown on a 3D solid
Projection lines connect the footprint to the daylight line at key design points, such as the start and end of transitions. These projection lines are created with non-editable feature lines. Grading styles have a 3D solid display component that shades the surface and appears automatically in a 3D view. This can be used to view the grading without creating a terrain model.
How Projection Grading Works

Grading algorithms used in some commercial civil engineering products employ a simple method of ray projection. A ray is simply projected from the footprint at the given criteria to find the intersection with the surface. This method does not fully resolve situations where the grading intersects itself in 3D, such as in a tight inside corner, or where the grading is projecting past the radius of the footprint, as shown in figure 8.
How Projection Grading Works | 111
Figure 8: Projecting past the radius of a footprint
Figure 8 shows a case in which the footprint has a rounded corner with a radius of 50 feet. Gradings are projected out 100 feet to the surface, and the gradings along two adjacent sides intersect far from the corner. The region of intersection can be quite complicated if the two segments have different footprint elevations or slope projections, resulting in ambiguous elevations where they meet.
Boundary Representation
AutoCAD Civil 3D slope grading uses a technique known as boundary representation, or b-Rep modeling. For each segment of the footprint, a bounded cone, plane, or spline region is created to match the grading criteria for that segment. These pieces are intersected against each other, and the resulting pieces are joined together in order to create a grading with real 3D intelligence.
Figure 9: Corner of a large projection grading
Figure 9 shows exactly how the cone on the outside corner of a pond intersects with the surface. Notice that you cannot draw a straight projection line from the footprint to the part of the grading that flows along the valley in the lower left. A simple ray projection algorithm would not generate this part of the solution, because it would find only the first ray intersection with the surface, at a higher elevation. By showing accurate results of the grading criteria, AutoCAD Civil 3D makes it easier for engineers to see important details and explore realistic design options. For example, in this case we can see that a retaining wall could prevent the grading from flowing along the valley, and we could revise the design to include such a wall. Finding a good solution becomes more difficult if the grading segments do not intersect each other fully. AutoCAD Civil 3D uses straightening and averaging algorithms to handle these and other problem spots in a second computing pass. While the 2D daylight is reasonably clear in most cases, finding the complete 3D edited solution can be much more complicated. Another complicating factor is the limited precision with which computers can calculate intersections. For these reasons, short segments and shallow angles can also be problematic.
Case Study:Two Intersecting Gradings

We can learn more about how AutoCAD Civil 3D creates gradings by looking at some examples of grading intersection. Figure 10 shows the top view of two overlapping gradings. The segment on the left has a grade of 0%, and the one on the right has a steep grade of 100% with a cross-slope of 2:1.
Figure 10: Top view of two intersecting gradings
Figure 11 shows a side view of the gradings, which reveals that they have only a single point of intersection. This results in a chasing grade situation between the two segments, without a mathematical intersection line between the two patches, except for the degenerate intersection at the corner point.
Figure 11: Side view of two intersecting gradings
The slopes and grades were exaggerated for this example in order to show the problem more clearly, but a similar problem can easily happen any time the slope along the footprint exceeds the cross slope. If two gradings do not
intersect, AutoCAD Civil 3D can handle the problem by averaging the slopes and elevations in the intersection zone. This effectively transitions the cross slope in most cases, as shown in figure 12.
Figure 12: Calculated transition for two intersecting gradings
This situation is very common in real-world grading scenarios. In particular, it occurs when grading to the inside of a footprint where elevations of the footprint vary. Similar grading intersection problems can also occur when transitioning around inside corners.
Case Study:Three Intersecting Gradings

When more than two patches overlap each other from the top view, but do not intersect completely in 3D, finding a solution gets increasingly complex. Consider the example in figure 13.
Figure 13: Plan view of three intersecting gradings
If you look closely from the side, you can see that two of the patches do not intersect at all, and the other intersections are incomplete.
Figure 14: Side views of three intersecting gradings
In this case, AutoCAD Civil 3D is able to resolve the conflict through a process of elevation averaging, but as the ambiguous region becomes more complex,
the resolution gets more difficult. Figure 15 shows the cleaned up 3D view of the three intersecting gradings.
Figure 15: Calculated transition for three intersecting gradings
Preparing the Footprint

The previous section demonstrated how AutoCAD Civil 3D models complex geometries. These concepts imply several best practices for preparing a grading footprint. For example, you can use feature line editing tools in AutoCAD Civil 3D to clean up and simplify feature lines. Some of the best practices are as follows:
Use the Elevation Editor to verify the elevations along feature lines. Look for locations where an elevation may unintentionally drop to zero, such as at a split point. Use the Weed command (WeedFeatures) to remove unnecessary points and simplify grading geometry where possible. This operation can significantly improve the results where two or more gradings intersect. Use the Fit curve command (FitCurveFeature) to replace tessellated segments with an arc. This operation creates a smoothly curved grading face, rather than many short straight segments. Tessellated segments are common with feature lines created from 3D polylines that do not have arc support, such as those created with the Land Desktop grading commands.
Figure 16 shows the dialog box for configuring the weeding operation. You can specify which weeding factors to apply, adjust the numeric values, and preview the results before committing. In the example shown in figure 16, note the report near the bottom of the dialog box that 3 of 20 vertices will
Preparing the Footprint | 117
be weeded. When all four check boxes were selected, only one vertex would have been removed. Click the Help button on this dialog box to see the Help topic for weeding and learn how to use these controls for best results.
Figure 16: Weeding controls
The grading in figure 17 on the left is graded to the inside of a curve that has been tessellated by line segments. The grading on the right is graded from a true arc. The edited shape of the true arc is a more realistic grading.
Figure 17: Grading a segmented curve versus a true arc
You can use the Smooth command to convert a tessellated feature line to a true arc, similar to the polyline fit curve.
Grading to Targets
This section presents some best practices for different target types.
Grading to a Surface or Absolute Elevation

Grading to an absolute elevation is treated as though you were grading to a flat surface at that elevation. If you are unsure of a gradings ability to intersect with the surface, start with a steeper slope, then edit to a flatter slope.
Grading to Distance, Relative Elevation, or Stepped Offset

Grading design often makes use of offset feature lines for features such as curbs and ditches. You can create these in two general ways, depending on whether you want the secondary line to be dependent or independent of the footprint:
Grading to a distance or to a relative elevation creates a dependent parallel line linked to the footprint. In this case, editing the footprint also updates the offset line. Using the Stepped Offset command creates an independent parallel line that can be edited separately from the footprint.
Grading Group Surfaces

When the Automatic Surface Creation option is turned on, a surface is generated from the gradings. Any curves on the gradings are tessellated using the grading group tessellation settings. The grading group is added to the surface as a single operation. It appears in the Surface Properties, on the Definition page, in the lower Operation Type box. By default, Automatic Rebuild is turned on for the grading surface. When working on large grading groups in large drawings, you can turn this option off to get better performance. Additional surface data, such as points or breaklines, can be added to the grading group surface using the Surface Data commands. The creation of the Automatic Surface can be turned on or off as necessary.
Detached Surfaces and Infill Grading

You can also create a detached surface from a grading group by using the Create Detached Surface command, which converts the grading information into breaklines. Once created, a detached surface is no longer linked to the
Grading to Targets | 119
grading group, so it will not update with changes to the gradings. When surfaces are created from grading groups, boundaries are created around the gradings so that the surface represents the exact definition of the gradings. If the grading closes around on itself, this creates a hole in the surface. To fill in the hole, create grading infill. A grading infill can be created in any region that is entirely enclosed by feature lines.
Faster Surface Rebuilds

When refining a particular grading solution, you can improve system performance by temporarily turning off automatic surface rebuilding, and editing the grading style to turn off slope shading and slope patterns. These operations take extra time, and add extra complexity to the grading process. If the base grading does not have a good solution, these operations will also have trouble completing correctly.
Using Explode With Grading Objects

If a grading object is exploded, the projection lines and daylight lines become editable feature lines. You can do this to modify projection lines or a daylight line, then add them to the design surface as breaklines for use in an existing or new grading. Exploding the grading object creates a closed polyline that includes the footprint, projection lines, and daylight, so it completely bounds the face. Exploding the daylight alone creates a polyline from the daylight. Whether 2D or 3D polylines are created is determined by the Site Display Mode site property, which specifies either flatten to elevation or use elevation. On the other hand, using the ERASE or EXPLODE command on the footprint preserves the daylight as a feature line, but not the projection lines.
Using Feature Lines and Projection Grading Together

Sometimes, inside corners are not well suited to a projection grading solution. In reality, the projection grading result is often different from what will be constructed in the field. Lets look at a building footprint example to illustrate a technique for using the best of both feature line tools and projection grading tools.
TIP The exercises described in this section are also available in the form of two detailed Grading tutorials: Grading from a Complex Building Footprint and Using Feature Lines to Modify a Grading. We start with a building pad that already has the basic elevations assigned. In this case, the top portion of the pad is at an elevation of 402 feet and the bottom portion is at 400 feet.
Figure 18: Building pad overview
In this case, lets assume that we want to create a 1.5-foot shoulder around the pad, and then grade into the existing ground surface at 1%. At first, it might seem like slope grading is the ideal choice for both of these tasks; however, the area around the ramp needs more control than slope grading alone can provide. Lets look at what happens when we try to apply the first criteria to this footprint, grading to a distance of 1.5 feet.
Using Feature Lines and Projection Grading Together | 121
Figure 19: Building pad with slope grading
The 2D view in figure 19 looks fine, but notice in the 3D view of figure 20 how the grade twists in near the ramp:
Figure 20: Grade twists beside the ramp
Because the ramp is steeper than the specified 1% cross-slope, there is not a good way for slope grading to resolve this condition within the given constraints. More importantly, the inner portion of the shoulder is now substantially steeper than 2:1, so the problem will be exaggerated when we try to grade to the surface.
What we need is more detailed control of this region than slope grading allows. Because the daylight of a slope grading is controlled entirely by the criteria, it cannot be edited other than by changing the criteria of the grading. Instead, we can use the Stepped Offset command to generate a daylight line that we can edit manually to resolve the area around the ramp. First, we run the stepped offset command with the same parameters that were given to the slope grading (1.5' at 1%). This initial step yields essentially the same daylight solution as the slope graded version. However, because this is a stepped offset, we can use the full set of feature line editing tools to refine the solution. Next, we use the feature line Fillet command with a radius of 15' to create a smooth fillet between the corners of the two pads, as shown in figure 21.
Figure 21: Fillets inserted on each side of the ramp
Notice that the feature line fillet uses the elevations from the existing feature line, and smoothly interpolates them across the length of the fillet, as shown in figure 22.
Figure 22: Fillet elevations
Several other feature line editing tools could also have been used to trim out this portion of the grading and set the desired elevations for the shoulder edge. Now that we have a smoother feature line to grade from, we apply a 2:1 grade-to-surface criteria and create infill grading objects to handle the interior parts. Each infill grading must be completely bounded by feature lines. Figure 23 clearly shows the diamond markers for the two infill grading objects: one for the building pads and the ramp between them, another for the perimeter of both pads and the area between the fillets and the ramp.
Figure 23: Project graded to the surface
Figure 24 shows the same grading in a 3D shaded view. The gray area (1) is the infill grading that represents the shoulder, the gold area (2) is the pad infill grading, and the green (3) is the slope grading to the surface.
Figure 24: 3D grading
There are a couple of more details to clean up:
The arc portion of our ramp (area 1 in figure 25) is not triangulated very well One of the triangles adjacent to the ramp (area 2) is steeper than we would like
Figure 25: Triangulation issues
To fix the arc triangulation, we need to set a finer value for tessellation spacing in the grading group. As shown in figure 26, this can be difficult to find in the Grading Group Properties dialog box, because it can be set only when Automatic Surface Creation is enabled. However, this setting is also used for the Create Detached Surface command and infill grading triangulation. The best solution at this point is to turn on Automatic Surface Creation, change the tessellation spacing from the default value of 10 feet to 1 foot, then turn off Automatic Surface Creation again. You must click Apply after turning on Automatic Surface Creation in order to apply the changed settings.
Figure 26: Changing tessellation spacing
With the tessellation spacing set correctly, you need to update the infill grading. The easiest way to do this is by selecting the interior feature line (the building pad), and using MOVE with a displacement of (0.0, 0.0, 0.0). The results are shown in figure 27.
Figure 27: Improved triangulation on one side
The arcs in the ramp (area 1) are now triangulated better, but the triangles on the right side (2) are not well distributed. To handle this last issue, we will add another feature line to the infill to control the elevations in the same way that a breakline is used in a surface. First, create a polyline in the area that needs to be fine-tuned.
Figure 28: Feature line insertion
Then use the Create Feature Lines From Objects command. In this case, we want to assign elevations from grading objects so that the new feature line
starts at reasonable elevations. There is no need to insert intermediate grade break points. The triangulation of the infill adjusts to accommodate the new feature line, as shown in figure 29. Any of the feature line editing tools can now be used to precisely control this portion of the infill grading.
Figure 29: Resolved triangulation
Figure 30 shows the 3D view of our edited grading.
Figure 30: Final result in 3D
By using feature lines and projection grading skills together, we have demonstrated how to work through a typical design process, creating an initial grading, and then optimizing it for the specific project terrain. As demonstrated in this process, once you understand the grading design concepts, and master the basic procedures, you can combine projections with
feature lines, and use a range of operations to resolve the design challenges of a particular project.
130
Pipe Networks
This section describes best practices for working with pipe networks parts catalogs, as well as for creating, editing and labeling pipe networks.
How the Parts Catalog Works

This section explains best practices for using the parts catalog, and describes particular work scenarios that can cause problems. When pipe networks are created or edited, AutoCAD Civil 3D references the parts catalog for information about each part (pipe or structure). You can use the Part Builder utility to edit the data for any part, and to expand the catalog by creating additional custom parts. As shown in figure 1, each part is defined by three files with the same root name but different extensions:
Figure 1: Catalog files for two types of circular pipe
If you use Part Builder to modify a part, you will probably change the XML file, as it contains the detailed dimensions and calculations. Changes to the DWG and BMP files are possible, but not essential in every case. AutoCAD Civil 3D installs the default pipe network parts catalog at C:\Documents and Settings\All Users\Application Data\Autodesk\C3D <version>\enu\Pipes Catalog.
131
You can point your drawing to a different catalog by clicking Pipes menu Set Pipes Network Catalog, and then changing the settings in the dialog box shown in figure 2.
Figure 2: Dialog box for specifying the pipe network catalogs
Multi-User Environment
In a multi-user work environment with multiple parts catalogs, it is easy to create unwanted changes in drawings if your parts catalogs do not have consistent contents and standard locations. Unwanted changes can occur because each drawing references the parts catalog at the location specified on the computer on which it was created. If the drawing is opened on a different computer, where it cannot find a catalog at the same location, it points to the default location, or whatever is defined on the second computer. Unwanted changes can occur to parts in the drawing if the following conditions are met:
The user of the second computer edits the pipe network with an operation that references the parts catalog. The referenced part has specifications in the current catalog that differ from those in the original catalog.
Under these conditions, the part specifications from the current catalog are applied to the part in the drawing.
132 | Chapter 9 Pipe Networks
Operations that reference the catalogand can introduce unwanted changesinclude adding a part to the network or moving a part. Other operations, such as editing a label, do not reference the catalog.
Parts Catalog Management Practices

To prevent errors in multi-user environments, use the following practices for managing pipe network part catalogs:
When changes to a parts catalog are expected, designate a single person (the catalog manager) to be responsible for making changes and maintaining the master parts catalog. When the master catalog changes, the catalog manager distributes the updated catalog to all users or offices. Users send all new or modified parts to the catalog manager for addition to the master catalog. Among the team, agree on a standard process for doing this. For example, users could send to the catalog manager an entire catalog folder, or just the affected files (DWG, XML, and BMP) for a single part. If all users store their parts catalogs locally on their computers, the catalogs should be in the same location, preferably the default C: drive path used by AutoCAD Civil 3D. If a number of users are on the same network, a single pipes catalog can be stored in a central network location. In this case, it is important for users to avoid changing the shared catalog, as they could interfere with the work of other users. Instead, the catalog manager should be responsible for making all changes and notifying the users. When a new or modified part is required, always use Part Builder to make the edits. Manual edits to an .xml file can produce unwanted results. When modifying a default part, save it with a new name so that it can be easily distinguished from the original part. When sharing a drawing with another user, prevent unwanted part changes by setting the pipe network catalog to the same location, such as a shared network drive, or the default C: drive. If two separate catalogs are involved, verify that their contents are identical. AutoCAD Civil 3D uses the US Imperial Pipe Catalog and US Imperial Structure Catalog, by default. When creating a pipe network, if you are
Parts Catalog Management Practices | 133
working with metric drawings, change the Pipe Catalog to metric. Click Pipes menu Set Pipe Network Catalog. In the Pipe Network Catalog Settings dialog box, select US Metric Pipes and US Metric Structures for the Pipe Catalog and Structure Catalog fields, respectively.
Standardizing Pipes and Structures

Pipe network parts catalogs are a convenient mechanism for standardizing the specifications of pipes and structures across project drawings. But it is important for all users to understand how AutoCAD Civil 3D consults these catalogs and updates drawings during the editing process. In any environment where multiple users are sharing drawings, they should follow a standard procedure for maintaining and distributing the pipe network parts catalog to avoid unwanted part changes in drawings. All parts catalogs in use by a design team should be identical, and they should be stored in consistent locations. If this is done, the parts catalogs are referenced in a predictable way, and it is easier to find and update them when required.
Problematic Scenarios
The following sections describe scenarios that can cause unexpected changes in pipe network drawings. Solutions are provided that can prevent or recover from the problem outlined in each scenario.
Local Catalogs and a New Part

1 Users A and B are both using AutoCAD Civil 3D with the default pipe network catalog path (C:\Documents and Settings\All Users\Application Data\Autodesk\C3D <version>\enu\Pipes Catalog\). 2 User A creates a new part and uses the part in Drawing 1. This new part exists only in the catalog on As computer. 3 User B edits Drawing 1 on his computer, and parts are referenced from the catalog. The new part created by user A is not available, so AutoCAD Civil 3D uses the closest part it can find. As a result, the part in Drawing 1 is changed.
Solution: User A sends the new part to the catalog manager, who distributes it to User B and others, maintaining standard catalogs that contain identical parts.
Local Catalogs and a Modified Part

1 Users A and B are both using AutoCAD Civil 3D with the default pipe network catalog path (C:\Documents and Settings\All Users\Application Data\Autodesk\C3D <version>\enu\Pipes Catalog\). 2 User A modifies an existing part X and uses the part in Drawing 1. The name of part X is not changed. 3 User B edits Drawing 1 on her computer, and parts are referenced from the catalog. Part X is found and used, but it is the default part X, not including the changes made by user A. Solution: User A saves the modified part with a different name, and sends the part to the catalog manager, who distributes it to User B and others. When modifying parts, users should change the part name to clearly identify the new part.
Part Catalogs on Different Networks

1 User A is using AutoCAD Civil 3D with the pipe network catalog path set to a network location, such as N:\Autodesk\Civil3D <version>\Pipes Catalog\. 2 User A creates a new part and uses the part in Drawing 1. 3 User B, in another office, edits Drawing 1 on his computer, which has the pipe network catalog path set to a different network location, such as J:\Autodesk\Civil\Pipes Catalog\. Drawing 1 searches for the pipes catalog on the N: drive but does not find it. Therefore, AutoCAD Civil 3D substitutes the most similar part from the catalog on the J: drive and uses it instead. Solution: User A sends the new part to the catalog manager, who distributes it to User B and others to maintain consistent catalogs. Users of networked catalogs in different offices should agree to use the same drive letter and path
Problematic Scenarios | 135
for their parts catalogs. If this is done, drawings can be shared reliably and it is easier to maintain standard catalogs.
Drawing Shared Between Two Companies

1 Company A is using AutoCAD Civil 3D with the pipe network catalog either locally or on the network. Company A creates a new part or modifies an existing part. That part is used in a pipe network in Drawing 1. The drawing is given to Company B. 2 Company B opens and edits the drawing, which points to the path where the catalog resided at Company A. If that was the default location, the drawing finds that path at Company B and looks there for the part. If the saved path was a network location that does not exist at Company B, AutoCAD Civil 3D looks in Company Bs default catalog location. If the part is a standard AutoCAD Civil 3D part with the name unchanged, it uses the one in Company Bs catalog, regardless of whether it resembles the one Company A intended. If the part is new or a renamed standard AutoCAD Civil 3D part, the software looks in Company Bs catalog for the most similar part. Solution: Company A provides a copy of its parts catalog along with the drawing, asking Company B to reference this catalog, or update its current catalog to include the changes. Ideally the changes are clearly identified so that Company B can determine whether the updates from Company A would introduce any unwanted changes to other drawings.
Creating User-Defined Optional Properties

To add further definition to a part, you can assign optional properties to a part size definition in a parts list. You can create a user-defined property to display information such as pipe design discharge.
Assign Optional Properties to a Part Size

One way to customize a part is to add a property to the part size. In the following example, you will create a new property by editing the Part Parameter Configuration file.
To assign optional properties to a part size 1 Navigate to the Part Parameter Configuration xml file (AeccPartParamCfg.xml). The default location is C:\Documents and Settings\All Users\Application Data\Autodesk\AutoCAD <version>\enu\Pipes Catalog\Aecc Shared Content 2 Open the file and click View Source to modify the file. 3 Navigate to the <AeccParamDeclaration> section. A sample optional property is the Hazen Williams Coefficient flow analysis. The entry for this is as follows: <AeccDfParameter name="ACHW" desc="Hazen Williams Coefficient" context="FlowAnalysis_HazenWilliams" index="0" datatype="Float" usage="Double_General" unit="" visible="True" internal="True"/>. 4 Copy an existing optional property and make changes as appropriate to create a new property. 5 In the <AeccParamUsage> section, the corresponding entry for the sample in step 3 is <AeccOptParam context="FlowAnalysis_HazenWilliams"/>. Copy and modify an entry as appropriate to create a new entry for your property. 6 Save and close the xml file.
Creating User-Defined Optional Properties | 137
Parts Lists
The following sections describe best practices for using Parts Lists.
Backup Part Catalog

It is a good practice to make a copy of the entire Part Catalog directory before you make any modifications. If you make any mistakes, you can replace the Part Catalog with your copy. Otherwise, you have to reinstall AutoCAD Civil 3D. Make a copy of C:\Documents and Settings\All Users\Application Data\Autodesk\C3D <version>\enu\Pipes Catalog and store in a secure place, such as a backup drive or disc.
Parts List Rules

When building a parts list, you create a list of parts for a given system type, and assign them the desired styles. Rules are never run automatically, only at creation time and when the Apply Rules command is run. You can apply rules by selecting a pipe or structure in a drawing, then right-click and click Apply Rules. This is designed so that undesired changes are not made automatically, or accidentally; you must actively run them. You can bulk edit part list rules and styles in the Panorama view. Right-click on the column header and select Edit.
Pipe and Structure Rules

For best results, it is not recommended that you customize rules. Part Rules are only intended to determine the best initial pipe and structure elevations during pipe creation. These are usually checked against the surface being referenced by the network parts. In the drawing, right-click a pipe and click Pipe Properties. In the Pipe Properties dialog box on the Rules tab, edit Rule set parameters such as minimum slope and depth to achieve the best results.
If you edit network parts, rules are never re-run automatically, in order to avoid inadvertent or unwanted changes to pipe or structure elevations. To re-run rules, use the ApplyRules command.
Renaming Part Size Name

Renaming part list names is done individually. When a part size is added to a parts list, a part size name is automatically generated. For example, 16 x 24 inch Egg-Shaped Culvert MCR_0.000000 ACMan_0.000000 ACHW_0.000000 ACDW_0.000000 Material_. This name is impractical for use in a label, so you should rename the part sizes using a convention such as <Size/Material/Shape>. An example is 72-inch RCP, in which RCP stands for reinforced concrete pipe. Another option is to create a label that includes the actual part size value and also displays a material description using an acronym that you standardize for your company.
Pipe Network Design

The following sections describe best practices when designing a pipe network.
Specifying Styles
Right-click a collection on the Prospector tab to batch change properties such as style, rule, or render material.
Renaming Part Size Name | 139
Figure 3: Edit styles in the item view
You can quickly edit the styles of many pipes or structures in the Prospector tab for that pipe network as shown in figure 3. To bulk edit pipes or structures 1 Right-click the Pipes collection on the Toolspace Prospector tab. 2 Press the shift key and select the desired pipes, then in the item view, right-click the Style column header and select Edit. 3 You are prompted to choose a different style. Make your selection and the selected pipes are updated in the drawing.
One Network Per Network Type

Components in a pipe network do not have to be directly connected. It is a good idea to create one pipe network per network type per project. For example, one Sanitary Network, one Storm Drainage Network, one Water Network, and so on. This allows for easier editing and rerouting of the system. Experiment with your sites to find the best solution for you.
Rerouting Pipes
You cannot connect pipe network elements from different networks. Therefore, create a single network that includes all parts that might eventually need to be connected. For example, include all storm drainage structures and pipes in a single pipe network. During the course of your design, you may find that a particular section of pipe should be connected to a different structure.
Networks in Profile and Section Views

The following sections describe best practices for displaying pipe networks in profile and section views.
Pipe Connection Display in Profile

Use the Clean Up Pipe To Pipe Connections option in the Pipe Style dialog box, as shown in figure 4, to improve the appearance of pipe profiles so that the pipes graphically appear to line up as expected. This option is not enabled by the default, so you must select it. To enable pipe clean up 1 Select a pipe in the drawing. 2 Right-click and click Edit Pipe Style. 3 Select the Profile tab in the Pipe Style dialog box. 4 Click the Clean Up Pipe top Pipe Connections check box.
Networks in Profile and Section Views | 141
Figure 4: Dialog box for selecting pipe connection clean up
Create From an Alignment

Creating an alignment from network parts is a good method for generating pipe run profiles. If your local agency standards require profiles for pipe network centerlines, use the CreateAlignFromNetwork command to convert alignments to networks.
Grip Editing in Profile View

When grip editing pipes and structures in profile view, a good practice is the use of the transparent command station/elevation. This is useful if you need to set a grip (Pipe ends/Structure rim or sump) at a certain elevation. You can also match the crown invert of adjacent pipes across structures. In general, grip editing enables you to more easily modify slopes and elevations.
Convert 3D Polylines
A good method for creating water and gas line pipe profiles is to create a 3D polyline and then convert it to a pipe network.
To convert a 3D polyline 1 Use the Survey feature to convert survey data to a 3D polyline object. 2 Use the CreateNetworkFromObject command to convert the 3D polyline into a pipe network. Based on the vertices of the 3D polyline, AutoCAD Civil 3D will place structures on the network. For more information, see
Managing Pipe Data

The following sections describe best practices for managing pipe data.
Locating Pipe Network Parts

The best way to locate and identify a single pipe or structure embedded within a large network is to know the part name. When you create pipes and structures, assign them meaningful names so that they are easily distinguishable. Use a consistent naming convention so that you can locate the part on the Prospector tab. You cannot zoom to the Prospector tab to display a part, but you can zoom from the Prospector tab to the part in the drawing.
Pipe Networks that Traverse Multiple Surfaces

A common scenario is a pipe network that crosses multiple surfaces. One way to handle this is to divide the network into two separate networks, each with its own associated surface. Note that the network properties have a default surface and alignment that is assigned to each part. These defaults can be changed at any time and for any given part. You can change the default references in bulk by right-clicking the item view or Panorama column header. Another useful method when creating a pipe network that would cross multiple surfaces, is to create a composite of the two surfaces. For example, if you have an existing road surface and a finished ground surface, you can create a composite volume by which to define the network. For more information, see the Calculating Composite Volumes topic in the AutoCAD Civil 3Dhelp.
Managing Pipe Data | 143
Renaming Pipe Network Parts

When pipe network parts are created, they are automatically assigned names and numbers. If the default naming/numbering process does not give desired results (the numbers themselves and/or the direction of numbering) you can use the Rename Networks Parts command to automatically rename and optionally renumber a series of pipes and structures. Select a linear series of connected pipes and structures, and automatically rename them to more easily manage the network. Use this command so that you do not have to individually locate and manually rename components. To rename pipe network parts 1 From the Pipes menu, click Utilities Rename Network Parts. You can select to rename/renumber just pipes, just structures, or both. 2 In the drawing, click to select the part(s) to rename and press Enter. The Rename Pipe Network Parts dialog box is displayed (figure 5).
Figure 5: Dialog box for renaming pipes and structures
Network Labeling Strategies

The following sections describe best practices for annotating network parts and structures.
Spanning Pipes
You can add spanning labels to pipes in profile view in the same way you can add them in plan view. Just as for pipes in plan view, you can move profile span labels to any connected pipe or structure in the span. NOTE The AutoCAD LIST command is a good method to list the connected pipes in the span.
Network Labeling Strategies | 145
Breaking Pipes
As it is not always feasible to complete layout before creating labels, you can use spanning labels to annotate pipe spans. Spanning labels are useful in places where you have connected a lateral to a pipe. When a lateral is connected to a pipe, the original pipe is broken at the connection point. A spanning label annotates the two broken pipe segments as if they were still one continuous pipe.
Spanning Multiple Segments

Spanning labels are also useful when you have long continuous pipes of multiple segments such as curves, or using pipes to represent a flexible underground utility. The spanning label will label a number of pipe segments as if they are one continuous pipe.
Labeling Pipe External References

You can label pipe network xref data. After inserting the xref data, label the pipes and structures as if they are in the current drawing. Tables cannot be created for pipe xref data.
Digging It: Display Flow Capacity with Manning Equation

You can use an expression for Mannings equation to label pipes in plan or profile view in order to display their flow capacity. This process was developed by Jeffrey Old, a licensed P.E. and AEC Solutions Engineer with Hagerman & Company, Inc., based in Mt. Zion, Illinois, USA (http://www.hagerman.com). Jeffrey has provided advice on how to successfully use expressions to design pipes hydraulically, as well as an explanation of how these expressions work.
Manning Equation
With the use of a mathematical expression for Mannings equation, you can label pipes in plan or profile to display their flow capacity as a basis for analyzing the overall capacity of your network. AutoCAD Civil 3D seemingly does not have the ability to design pipes based on a flow value, which is usually expressed in cubic feet per second. However, with the expression, you can design hydraulically. This is a good example of how the creative use of expressions with label styles can greatly improve your network designs. Mannings equation is considered the engineering default for calculating gravity flow in a pipe. This equation is an expression using four components of a pipe. The four components are:

Cross-sectional area of flow expressed in square feet Slope expressed in feet of fall over feet of run Hydraulic radius expressed in feet and calculated as flow cross-sectional area divided by the wetted perimeter A roughness coefficient known as Mannings n value which has no units.
The basic equation in English (imperial) units is as follows:
Q = (1.49/n) * Area * (hydraulic radius)^(2/3) * (slope)^(1/2), where Q is flow in cubic feet per second.
Digging It: Display Flow Capacity with Manning Equation | 147
By assuming that a pipes theoretical maximum capacity occurs when flowing 100% full, the hydraulic radius for a circular pipe can be reduced to a simple term:

Hydraulic radius = area / perimeter Hydraulic radius = pi*r^2 / 2*pi*r Hydraulic radius = r / 2, where r is radius in feet.
Using this simplification, Mannings equation for circular pipe flowing full can be reduced to a function of pipe radius, slope, and roughness:
Q = (1.49/n) * pi * r^2 * (r/2)^(2/3) * (slope)^(1/2)
Display Pipe Components

Object label styles in AutoCAD Civil 3D can be composed using the basic components of the objects they are designed to label. For example, a label style for a parcel line can be set up to display the bearing and distance of that line, which are two of its basic components. Similarly, pipe label styles can be set up to display a pipes basic components, such as slope or diameter, in plan or profile view. Taking this a step further, tables can be created with fields populated by the basic components of a series of parcel lines or pipes.
Spot Elevation Expression

With label styles you can create and name mathematical expressions based on the components of the objects they are labeling. For example, an expression can be created for spot elevations on a surface which subtracts a given value from the actual surface elevation. The expression could be called SUBGRADE and the composition might look something like this: {Surface Elevation}-2, where Surface Elevation is a component, or named property, of the surface. Once created, that expression can be used as a component for label styles and table styles. Simply create a Spot Elevation surface label style employing the expression called SUBGRADE. Use the New Expression dialog box as shown in figure 6.
Figure 6: Surface label style expression
Writing the Flow Capacity Expression

You can create a custom expression for flow in a full circular pipe. To create the expression

In Toolspace, on the Settings tab, expand a pipe label style collection. Right-click Expressions and click New. In the New Expression dialog box, enter the name as FLOW. Enter the following expression: 1.49*pi*((({Start Crown Elevation}-{Start Invert Elevation})/2)^2)*(1/0.013)*((({Start Crown Elevation}-{Start Invert Elevation})/4)^(0.6667))*(SQRT({Pipe Slope}))
Writing the Flow Capacity Expression | 149
Click OK.
Figure 7: Flow capacity expression
NOTE The term ((Start Crown Elevation Start Invert Elevation)/2) has been substituted for Pipe Radius. The use of Pipe Radius, which is a named component of the pipe, does not work correctly in this case. Similarly, do not use the {Inner Pipe Diameter} component. This expression assumes a Mannings n value of 0.013, which is the standard for concrete pipe. In fact, pipes have a named component for Mannings n value which you can set. However, adding that component to your expression yields an undesired result so you should not use it for this procedure.
Create Flow Label Style

The next step is to create a pipe label style for plan and profile which displays this value for flow. Figure 8 shows an example of this label style with all the pertinent hydraulic settings:
Figure 8: Use text component editor to display flow capacity (Q)
Displaying the flow capacity is useful for design purposes. When it is time to produce your construction plans, assign a style more suitable for production drawings. As pipes are created and labeled, the label style DESIGN FLOW will display the pipes flow capacity (Q).
Figure 9: Flow capacity label
The flow capacity label is especially effective in profile view where the invert grips of each pipe can be adjusted until the desired pipe capacity is reached.
Writing the Flow Capacity Expression | 151
You may have to follow each iteration of invert raising or lowering with a REGEN command to regenerate the drawing, but it is still effective. You can create pipe and structure tables in AutoCAD Civil 3D. Now with the added expression for flow, it becomes easy to add the capacity of a pipe to a table. These expressions demonstrate the importance of fully exploring the capability of mathematical expressions with AutoCAD Civil 3D. Making a couple of assumptions, it is easy to see that any user with a simple understanding of Mannings equation can create an expression for flow capacity and compare that value to the expected flow calculated by the design storm. This comparison can then be used to help set the diameter and slope of a pipe. For more AutoCAD Civil 3D tips and tricks, see Jeffrey Olds technology bulletin postings at the Hagerman & Company, Inc. website: http://newsletters.hagerman.com/newsletters.
Index
3DCONFIG setting 27
A
adaptive degradation setting 27 alignments 71, 103 for corridors 71 site interaction 103 assemblies 73 for corridors 73 assembly offsets 74 AutoCAD system variables, setting 26 Autodesk Vault 4849, 5152, 55, 57 administration tool 55 and Microsoft Office 57 configuration 48 multi-site 49 multiple vaults 51 project interfaces 55 working folder options 52
C
code set styles 76 contour data, flat areas 66 corridors 71, 76 best practices 71 intersection design 76 regions 76 corrupt data, purging 33 country kits 5 cut and fill labels for surface
19
D
data 24, 30, 3637 management 24 referencing 36 resolution 30 shortcuts 37 data clip boundary 60 data shortcuts, XML files 38 default template, specify 4 DEM export 63 Digging It 1, 43, 147 drag and drop styles 13 drawing 3, 29, 31 settings 29 structure, section views 31 templates 3
B
best practices 1, 3, 8, 18, 24, 35, 48, 59, 71, 79, 101, 131, 133 Autodesk Vault 48 corridors 71 drawing templates 3 grading 101 label styles 18 large data sets 24 other sources 1 parcels 79 parts catalogs 133 pipe networks 131 points and surfaces 59 project management 35 styles 8 boundary for surface 61 boundary representation (grading) 112 breaklines, adding 61
E
editing 105, 109 feature line labels 109 feature lines 105 elevation points 104 eTransmit and project files 47 explode grading object 120 external references (xrefs) 38
Index | 153
F
feature line 101, 119 grading 101 offset 119 folder permissions 45 footprint preparation 117
surface cut and fill 19 LandXML files 63 layers 8, 15 deleting unused 15 for display management 8 lot lines 102103 and grading 102 interaction with feature lines
103
G
grading 101, 110, 112113, 117, 119 120 best practices 101 boundary representation 112 detached surface 119 example 120 feature line method 101 footprint preparation 117 infill 120 intersection of planes 113 object parts 110 offset feature lines 119 slope projection method 101 use of explode 120 grading group surfaces 119 grid surface 63 GRIPOBJLIMIT setting 28
M
Mannings equation 147 mask for surface 60
O
object styles 6 minimal 6 offset feature lines
119
P
parcel creation 79, 8384 automatic 83 from AutoCAD geometry 79 semi-automatic 84 parcels 79, 81, 86, 8889, 93, 96, 9899 best practices 79 editing 86 labeling 89 labeling xrefs 93 offsetting 88 site topology 81 spanning labels 96 table creation 99 tag renumbering 98 parts catalog management 133 performance optimization 25 pipe networks 131, 136, 138139, 143 145, 147 best practices 131 design 139 display flow capacity 147 labeling 145 locating parts 143
H
HIGHLIGHT setting 29
I
infill grading example 126 ISAVEPERCENT setting 29
L
label styles 7, 18 editing 18 minimal 7 labeling xrefs 21 labels 1920 profile high/low points
20
154 | Index
Mannings equation 147 multiple surfaces 143 parts catalog 131 parts lists 138 renaming parts 139, 144 resizing parts 138 user-defined optional properties 136 point files 61 and surfaces 61 filtering 61 points 62, 104 elevation 104 performance enhancement tips 62 profile high/low point labeling 20 profiles, for corridors 75 project management 36, 38, 4548 data referencing 36 eTransmit 47 links between drawings 38 project import and export 47 project templates 46 user permissions 45 using Autodesk Vault 48 working folder 46 project structure, three levels 38 project template 46, 55 PROXYGRAPHICS setting 29 purging redundant data 32
section view drawing structure 31 simplify surface 60 site object interactions 69, 102 sites 81 parcel interactions 81 slope projection grading 101 styles 1314, 1618 drag and drop 13 for sketches, concept drawings 17 setting default 16 surface transparency 18 transfer from template 14 surface 19, 59 cut and fill labels 19 snapshot 59 surfaces 60, 63, 6566 contour data 65 export DEM 63 LandXML import 63 masks and boundaries 60 minimizing flat areas 66 system settings for better performance 25
T
table tag renumbering template settings 29 98
Q
QNEW command 4
V
Vault references 37 VIEWRES setting 30
R
RAM increase 31 REGENMODE setting 30 right-of-way parcels 81, 88
W
WBlock, removing corrupt data working folder location 46 33
S
Sample_Styles drawing 9 SAVETIME setting 29 section swath width 76
X
XML data shortcut files xref labeling 21 xrefs 38 38
Index | 155
156

c3d Best Practices

Uploaded by

Copyright:

Available Formats

c3d Best Practices

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

c3d Best Practices

Uploaded by

Copyright:

Available Formats

AutoCAD Civil 3D 2009

Templates, Styles, and Drawings . . . . . . . . . . . . . . . . . . 3

Table Tag Renumbering . . . . . . . . . . . . . . . . . . . . . . . 98 Creating Parcel Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Pipe Networks . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Templates, Styles, and Drawings

Optimizing Drawing Templates

Using the Correct Templates

Specify a Template to use with the QNEW Command

Figure 1: Set the default template

4 | Chapter 2 Templates, Styles, and Drawings

Use the Appropriate Country Kit

Use References to Reduce Drawing Size

Apply Meaningful Names to Objects

Use Minimal Object Styles

Figure 2: Editing a subassembly shape style

6 | Chapter 2 Templates, Styles, and Drawings

Turn Off Labels

Figure 3: Turning off label visibility for a feature

Figure 4: Turning off label visibility

Use of Layers to Manage Display

Figure 5: C-ROAD layers

Autodesk Civil Engineering Community

8 | Chapter 2 Templates, Styles, and Drawings

Create Styles for Project Stages

Surface Style Comparison

Figure 6: Elevations and slopes are not visible

10 | Chapter 2 Templates, Styles, and Drawings

Figure 7: Enable the elevations and slopes components

Figure 8: Elevation colors and slope arrows for presentation

Parcel Style Comparison

12 | Chapter 2 Templates, Styles, and Drawings

Copy Style in Master View

Figure 9: Use drag and drop to transfer style

Transfer Template Styles to Drawing

14 | Chapter 2 Templates, Styles, and Drawings

Figure 10: Browse to select the template file to transfer styles

Delete Layers from Drawing or Template

Delete Layers from Drawing or Template | 15

Figure 11: Select layers to delete

Setting Default Styles for New Objects

16 | Chapter 2 Templates, Styles, and Drawings

Figure 12: Use command settings to set default styles

Conceptual Visual Styles

Conceptual Visual Styles | 17

Transparent Surface Style

Editing Label Styles

18 | Chapter 2 Templates, Styles, and Drawings

Displaying Surface Elevation Cut/Fill Labels with Colors

Labeling High and Low Points for a Profile View Curve

20 | Chapter 2 Templates, Styles, and Drawings

Labeling External References

Adding Xref Labels

Labeling External References | 21

Xref Layer Control

Turn Off Layer Visibility

Save Current Layer Settings

Change Color ByLayer or ByStyle

22 | Chapter 2 Templates, Styles, and Drawings

Managing Large Data Sets

Defining Large Data Sets