Power Grid Control Through PC
Power Grid Control Through PC
Power Grid Control Through PC
WHAT IS A GRID
POWER GRID CONTROL THROUGH PC is to provide a facility by which we can control all the appliances connected to the power grid like bulbs, fans, TV, fridge, and air cooler etc. from your PC or from your laptop at a distance of 10meters around the control board.
BLOCK DIAGRAM
:
TRANSMITTER:
Relay Microcontroller
B u l b
RF DX
D E C O D E R
LED1
LED2
HARDWARE DESCRIPTION
MICROCONTROLLER
ENCODER
DECODER RF
OVERVIEW
CPU
General purpose Micro Processor I/O PORT SERIAL COM PORT
RAM
ROM
TIMER
Address bus
RF Transmitter :
In this project TX 01 is used which transmits the signal. The signal is given to the RF transmitter.
RF Receiver:
RX 04 Receiver module, the transmitted signal is received by this receiver module. The received data is send to the microcontroller.
Reed relays:
RS 232:
For serial I/O interfacing microcontroller we will use RS 232which will done by using MAX 232 which will help in converting the TTL standards to rs232 standards and vice versa. The wiring of RS-232 devices involves first identifying the actual pins that are being used. Here is how a female DB-9 connector is numbered:
Power supply
In this system we are using 12 volts and 5 volts power supply, 5 volts for Microcontroller and Relays will be operated on 12 volts.
POWER SUPPLY
Bridge Rectifier
Filter Circuit
Regulator section
CONCLUSION
using highly advanced ICs and with the
help of growing technology the project has been successfully implemented. THROUGH PC we can control the unnecessary usage of power
BY TEJASWINI.V