Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 126 views

    Knurling Process

    Uploaded by

    Kiran Kumar K T
    The document outlines the steps to perform a knurling process on a lathe, which includes setting the lathe to a slow speed, mounting the workpiece between centers, selecting and positioning the knurling tool, engaging the longitudinal feed to knurl the workpiece to the desired length while applying cutting oil, and making multiple passes with increasing pressure on the knurling wheels.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Knurling Process

    Uploaded by

    Kiran Kumar K T
    126 views1 page
    The document outlines the steps to perform a knurling process on a lathe, which includes setting the lathe to a slow speed, mounting the workpiece between centers, selecting and positioning the knurling tool, engaging the longitudinal feed to knurl the workpiece to the desired length while applying cutting oil, and making multiple passes with increasing pressure on the knurling wheels.

    Original Description:

    Knurling

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines the steps to perform a knurling process on a lathe, which includes setting the lathe to a slow speed, mounting the workpiece between centers, selecting and positioning the knurling tool, engaging the longitudinal feed to knurl the workpiece to the desired length while applying cutting oil, and making multiple passes with increasing pressure on the knurling wheels.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    126 views1 page

    Knurling Process

    Uploaded by

    Kiran Kumar K T
    The document outlines the steps to perform a knurling process on a lathe, which includes setting the lathe to a slow speed, mounting the workpiece between centers, selecting and positioning the knurling tool, engaging the longitudinal feed to knurl the workpiece to the desired length while applying cutting oil, and making multiple passes with increasing pressure on the knurling wheels.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    KNURLING PROCESS

    1. Set the lathe to the slowest spindle speed. 2. Insert a solid tail stock center. 3. Adjust the compound rest to zero degrees. 4. Set the quick-change gear box to a fast feed rate. 5. Mount the work between centers, lubricate the tail stock center. 6. Set the feed selection lever to the longitudinal position.. 7. Select the proper knurling tool, mount the tool in the tool post. 8. Center and square the knurling tool to the work piece. 9. Check the tracking of the knurling tool, adjust the tool if it is cross-tracking. 10. Engage the longitudinal feed, and let the tool feed across the work piece to the desired length. 11. Apply cutting oil during the knurling operation. 12. Reverse the travel of the carriage. A. Change the feed reversing lever. B. Reverse the spindle rotation. 13. Increase the pressure on the knurling wheels up to .035" and continue knurling. 14. Every third pass, run a clean-up pass by not increasing the pressure on the cross-slide.

    You might also like