Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Habilitar SNMP en Linux Centos

    Uploaded by

    Jhan Ore
    This document provides instructions for setting up SNMP monitoring on a server in 3 steps: 1. Install the net-snmp and net-snmp-utils packages and configure SNMP with the snmpconf utility. 2. Edit /etc/snmp/snmpd.conf to enable read-only SNMP communities for localhost testing and a remote Cacti server. 3. Start the SNMP daemon, confirm it is listening correctly, and test SNMP walks locally and remotely using the configured community string.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Habilitar SNMP en Linux Centos

    Uploaded by

    Jhan Ore
    43 views2 pages
    This document provides instructions for setting up SNMP monitoring on a server in 3 steps: 1. Install the net-snmp and net-snmp-utils packages and configure SNMP with the snmpconf utility. 2. Edit /etc/snmp/snmpd.conf to enable read-only SNMP communities for localhost testing and a remote Cacti server. 3. Start the SNMP daemon, confirm it is listening correctly, and test SNMP walks locally and remotely using the configured community string.

    Original Title

    Habilitar Snmp en Linux Centos

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for setting up SNMP monitoring on a server in 3 steps: 1. Install the net-snmp and net-snmp-utils packages and configure SNMP with the snmpconf utility. 2. Edit /etc/snmp/snmpd.conf to enable read-only SNMP communities for localhost testing and a remote Cacti server. 3. Start the SNMP daemon, confirm it is listening correctly, and test SNMP walks locally and remotely using the configured community string.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    43 views2 pages

    Habilitar SNMP en Linux Centos

    Uploaded by

    Jhan Ore
    This document provides instructions for setting up SNMP monitoring on a server in 3 steps: 1. Install the net-snmp and net-snmp-utils packages and configure SNMP with the snmpconf utility. 2. Edit /etc/snmp/snmpd.conf to enable read-only SNMP communities for localhost testing and a remote Cacti server. 3. Start the SNMP daemon, confirm it is listening correctly, and test SNMP walks locally and remotely using the configured community string.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Quick method, immediately after install: yum install net-snmp yum install net-snmp-utils snmpconf -g basic_setup

    Pick reasonable values. I enable one of each kind of monitor so I have some examples, and only enable snmp 1 / 2c READONLY communities with a community string specific to my setup. I enable one rocommunity for localhost testing and then create another with the same community name reachable from my cacti server. This ends up looking like this in /etc/snmp/snmpd.conf (use your settings) rocommunity MYCOMMUNITY1234 cactiserver.localdomain.com rocommunity MYCOMMUNITY1234 localhost I use localhost rather than hostname so the config is portable across machines. FOR those like me that are too lazy to walk to the console and use the GUI, otherwise enable snmp/UDP in the GUI. iptables --insert RH-Firewall-1-INPUT 9 --protocol udp --dport 161 -j ACCEPT

    note rule 9 in the chain is about right if you have ssh and http enabled. Just want it to be before the final rule. Do an iptables list and count down to right before the final REJECT rule use that number (one less than reject) instead of 9. chkconfig snmpd on service snmpd start lsof -i UDP:snmp #confirm its listening on port snmpwalk -Os -c MYCOMMUNITY1234 -v 1 localhost system #confirm its up locally snmpwalk -On -c MYCOMMUNITY1234 -v 1 localhost prTable #look at process monitor you setup during config, get MIB number snmpwalk -On -c MYCOMMUNITY1234 -v 1 localhost dskTable #look at disk monitor you setup during config, get MIB number

    Etc. You can read the whole list in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt in the section called Current UCD core mib table entries. #Test again from cactiserver snmpwalk -Os -c MYCOMMUNITY1234 -v 1 TARGETMACHINE system It works? iptables-save > /etc/sysconfig/iptables (or it wont work after you reboot!) DONE!

    You might also like