Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 585 views

    Intelligent Automatic Plant Irrigation System

    Uploaded by

    Iet Trichy
    This document describes an automatic plant irrigation system that uses sensors to monitor soil moisture levels and activate a water pump when the soil becomes dry. Copper wires inserted in the soil act as sensors by measuring the resistance between them. When resistance increases due to dry soil, a comparator circuit triggers a timer to operate the water pump for a preset period. The system irrigates plants without manual intervention, using low-cost and reliable components. It can be used for home gardens, greenhouses, farms and more.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Intelligent Automatic Plant Irrigation System

    Uploaded by

    Iet Trichy
    585 views5 pages
    This document describes an automatic plant irrigation system that uses sensors to monitor soil moisture levels and activate a water pump when the soil becomes dry. Copper wires inserted in the soil act as sensors by measuring the resistance between them. When resistance increases due to dry soil, a comparator circuit triggers a timer to operate the water pump for a preset period. The system irrigates plants without manual intervention, using low-cost and reliable components. It can be used for home gardens, greenhouses, farms and more.

    Original Description:

    Intelligent Automatic Plant Irrigation System

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes an automatic plant irrigation system that uses sensors to monitor soil moisture levels and activate a water pump when the soil becomes dry. Copper wires inserted in the soil act as sensors by measuring the resistance between them. When resistance increases due to dry soil, a comparator circuit triggers a timer to operate the water pump for a preset period. The system irrigates plants without manual intervention, using low-cost and reliable components. It can be used for home gardens, greenhouses, farms and more.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    585 views5 pages

    Intelligent Automatic Plant Irrigation System

    Uploaded by

    Iet Trichy
    This document describes an automatic plant irrigation system that uses sensors to monitor soil moisture levels and activate a water pump when the soil becomes dry. Copper wires inserted in the soil act as sensors by measuring the resistance between them. When resistance increases due to dry soil, a comparator circuit triggers a timer to operate the water pump for a preset period. The system irrigates plants without manual intervention, using low-cost and reliable components. It can be used for home gardens, greenhouses, farms and more.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.

    com/

    INTELLIGENT AUTOMATIC PLANT IRRIGATION SYSTEM

    Project Associates K.N.Manjula B.Swathi D.Sree Sandhya

    CONTENTS:

    1. Introduction-----------------------------1 2. List of Components--------------------2 3. Circuit diagram------------------------3 4. Circuit operation----------------------3

    5. Applications -------------------------------19 6. Conclusion----------------------------------19 7. Bibliography-------------------------------19

    1. INTRODUCTION

    Irrigation is the key to a successful garden. Long gone are the days of manual watering or relying on a friend to water when you are on vocation or away on business. The project presented here waters your plants regularly when you are out for vocation .the circuit comprises sensor parts built using op-amp LM324. Op-amp is configured here as a comparator. Two stiff copper wires are inserted in the soil to sense the weather the soil is wet or dry .The comparator monitors the sensor and when sensor sense the dry condition then the project will switch on the motor and it will switch off the motor when sensor is wet.the comparator does the above job it reciees the signals from the sensors.

    To arrange the circuit,insert copper wires in the soil to a depth of about 2cms,keeping them 3cms apart. for small areas a small pump such as the one used in air coolersis able to pump enough water

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/ with in 5 to 6 seconds.the timing components for the timer are selected accordingly. The timing can be varied with the help of preset voltage .

    The circuit is more effective indoors if one intends to use it for long periods. This is because the water from reservoir(bucket, etc) evaporates rapidly if it is kept in the open. For regulating the flow of water, either a tap can be used or one end of a rubber pipe can be blocked using M-seal compound, with holes punctured along its length to water several plants.

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/ 2. List of Components:

    R1, R2

    ________ 10k

    resistors

    R3

    ________ 220

    Resister

    C1

    ________ 100F Capacitor

    C2

    ________ 0.1 F Capacitor

    ________ IN4007

    LED

    ________ Light Emitting Diode

    IC1

    ________ LM324 Quad op-amp

    IC2

    ________ NE555 IC Timer

    RL1

    relay

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/ 3. Circuit diagram

    4. Circuit operation:

    When the soil dries out, the between the copper wires (sensor probes A and B) increases. If the resistance increases beyond a preset limit, output pin 1 of op amp N1 goes low. This triggers the timer IC2 (NE555) configured as a monostable multivibrator. As a result relay RL1 is activated for preset time the water pump starts immediately to supply water to the plants. As soon as the soil becomes sufficiently wet, the resistance between sensor probes decreases rapidly. This causes pin 1 of op-amp N1 to go high. LED1 glows to indicate the presence of adequate water in the soil . The threshold point at which the output of op-amp N1 goes low can be changed with the help of preset VR1 . http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/ 4

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/

    6. Advantages: Highly sensitive Works according to the soil condition Fit and Forget system Low cost and reliable circuit Complete elimination of manpower Can handle heavy loads up to 7A System can be switched into manual mode whenever required

    7. Applications: Roof Gardens Lawns Agriculture Lands Home Gardens

    7.Conclusion: The circuit is more effective indoors if one intends to use it for long periods. This is because the water from reservoir(bucket, etc) evaporates rapidly if it is kept in the open. For regulating the flow of water, either a tap can be used or one end of a rubber pipe can be blocked using M-seal compound, with holes punctured along its length to water several plants.

    8. Bibliography:

    http:// www.electronics-manufacturers.com http://www.datasheetcatalog.org http://www.wikipedia.com www.kpsec.freeuk.com Principles of electronics by V.K.Mehta www.google.com Basic electronics by Boylested

    http://mskrao.weebly.com/ http://mskrao.weebly.com/ http://mskrao.weebly.com/

    You might also like