Indoor Directional Antenna Vertical Polarization Half-Power Beam Width
Indoor Directional Antenna Vertical Polarization Half-Power Beam Width
Indoor Directional Antenna Vertical Polarization Half-Power Beam Width
Flat design
870 960 V 90
736 624
Cable RG 223/CU of 1m length, white, with N female connector 870 960 MHz < 1.5 7 dBi 50 H-plane: 90/ E-plane: 65 Vertical 50 Watt (at 50 C ambient temperature) 500 g 320 x 165 x 42 mm 205 / 155 / 32 mm Radiator: Brass. Radome: ABS, colour: White. Reflector: Aluminum. Mounting plates: Stainless steel. Two holes of 6 mm diameter in the mounting plate are provided for this purpose. All metal parts as well as the inner conductor are DC grounded.
65 90
10 dB dB
3 0
Mounting:
Horizontal Pattern
Grounding:
10
3 0
Vertical Pattern
Mounting:
936.675/c
Subject to alteration.
Mounting the attachment plate Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated.
Aligning the antenna Align the antenna over the attachment plate, keeping the cable in the middle of the plate.
Pulling the antenna downwards Pull the antenna downwards until it clicks into place.
Internet: http://www.kathrein.de KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany . Telephone +49 8031 1 84-0 . Fax +49 8031 1 84-9 73
page 1 of 1
736 624