One of the most exciting projects that a gardener can undertake is to propagate his own plants.

Few experiences can match the thrill and awe felt by a gardener who has successfully germinated an even crop of bedding plant seedlings or a particularly difficult woody plant seed, or who has managed to root a cutting or unite t w o grafted parts of a plant. Plant propagation has been practiced ever since early man abandoned his itinerant life and settled down on the land, where he started to grow his own food. The techniques of vegetative propagation developed in such ancient civilizations as those of the Babylonians and the Chinese are still relevant and in use in the twentieth century. Using this book The object of this book is to try to present some of the basic facts on which successful plant propagation is founded, so that the gardener wishing to venture into this field will find the elementary principles explained and will then only have to learn their application from experience. It is not intended that this book will be a complete answerit can only be a guide. Inevitably, some techniques of plant propagation have not been included either because they are too complicated or because they do not always produce satisfactory results. Vegetables have not been included as they are given detailed coverage in a companion volume, Vegetables. However, a comprehen-

sive range of techniques is described so that the gardener can propagate most plants, either from seed or vegetatively. The gardener can discover the way to propagate more than 700 genera of plants by referring to the index at the back of the book, where the appropriate method is listed. A few plants, such as rhododendrons, have been dealt with in detail, and so have a page to themselves, because there are several equally satisfactory ways to propagate them. How this book is arranged The concept and approach in this book is entirely my own, based on my experience gained over the past 20 years evolving different systems of plant propagation and teaching both horticultural students and amateur gardeners. My aim has been to try to present propagation techniques in their logical sequence, in seven separate sections. For example, I have placed layering in the same section as stem cuttings as they are both ways of inducing roots on a stem. Until now, plant propagation has often been presented in a confusing manner: root, stem and leaf cuttings have frequently been lumped together, when logically there is little or no relationship between them. The book starts with a glossary of propagation terms that the gardener may not know. Although the main text is written in a nontechnical style, some technical terms have inevitably been included, and it is to the

glossary that the gardener should refer if he is puzzled by the use of a certain word. The section on tools and equipment is essential reading before the gardener sets out to do any propagating. Here he will find explained the importance of cold frames, propagators, mist units, etc., and he will discover tips on how to select suitable pots and seed trays from the bewildering array that is available. The correct use of composts, fertilizers and rooting hormones is also discussed, and he will learn how to tackle the ubiquitous problems of pests and diseases. The section on propagating from seeds is divided into two parts: seeds in general, and tree and shrub seeds, where the problems of dormancy are explained. The information on how to collect, store and germinate various kinds of seeds and how to look after seedlings is of vital importance to any gardener. The book then presents a wide range of ways to propagate vegetatively. It starts with a section on roots and progresses through to sections on modified stems, stems and leaves. The last section gives full details on grafting and budding techniques, and there is a comprehensive index at the back of the book. Dispelling the mystique The practice of plant propagation is inclined to be surrounded by a certain mystique, despite the enlightened modern tendency to share knowledge. The "art" of plant propagation and the possession of "green" fingers are not magical powers confined to a few

fortunate gardeners; plant propagation is an entirely rational and logical technique, which, if practiced with knowledge and understanding, can be relatively simple and easy. Undoubtedly some people do seem capable of conjuring success without any basic knowledge and of carrying out the various operations instinctively, but these people have, perhaps by subconscious observation, noted correct conditions and timing. The gardener who is gifted with "green" fingers is not dissimilar to the person who is " g o o d " with animals or who has the capability to lead or influence other people. It is simply the result of an innate ability to observe particular conditions. Nothing, however, can supersede the value of real knowledge and understanding that the gardener needs when propagating a plant. Only once he is fully versed in the basic propagating techniques can he hope to be really successful. Although plant propagation is completely logical and explainable, some gardeners are definitely more successful than others; and it is here that the "art" of plant propagation cannot be discounted. The "art" is in interpreting information: it is possible to define the state of plant materials, the condition of plants or the effect of a particular environment, but success derives from being able to transfer this knowledge into practice and interpret these aspects in relation to a situation that is continually, but often almost imperceptibly, changing.

The many phases of plant propagation The actual process of propagation is only one of many phases in the production of a plant. The other phases are selecting suitable plant material; preparing it so it has a high capacity to regenerate; then providing suitable conditions in which the plant material can regenerate; and ensuring its survival until the final phase of establishing the plant material as an integrated, self-supporting new plant. Selecting suitable plant material Often the most overlooked, but one of the most significant, phases is the consideration and choice of suitable material from which to propagate. It is well worth the extra time and effort to assess the available plant material critically so that the best selection is chosen, and new plants are not produced from inferior stock. Only the best forms and selections of a plant should be earmarked for propagation, and they must always be from healthy stock, free from virus infections. Many plants, more especially the older and popular selections, will have deviated from the normal to some extent. Despite their varietal name, they may differ quite considerably and will exist in several clones, so bear this in mind when choosing plant material for propagation. Another limitation that should be considered if propagating by vegetative methods is that the capacity of the plant to regenerate will be affected by the age of the cutting and

its parent plant, as well as the age of the variety from which it is taken. Plant material of the current year's growth will regenerate more readily than older material, and the highest rooting response will be found in a plant that is juvenile, i.e. immature and unable to produce flowers or fruit. As soon as a seed germinates and produces a juvenile plant, it begins to "age" and its capacity to regenerate starts to decline. Most plants subsequently enter a mature phase when their regenerative abilities continue to decline. Old plants and older varieties will exhibit very low levels of response. Pruning or forcing a plant will only recover a little of this capacity to regenerate. Thus the gardener must be prepared to accept that old and very old plants and varieties will be difficult to propagate. For example, a deciduous azalea, of the Exbury type, which was germinated from seed only about 40 years ago, will be much easier to propagate than a Ghent azalea, which would have been originated over 140 years ago. It is important to realize this distinction, and that all plants derived from one selected form must, physiologically, be the same age, regardless of when they were vegetatively propagated. Preparing the plant material Having chosen the most desirable forms, the next phase is to prepare the material so that, when the time comes for propagation, it will possess its maximum capacity to regenerate.

Such preparation of highly regenerative material can be done by growing techniques such as pruning, feeding and watering, or by forcing the plant in a warmer environment than normal. Providing suitable conditions for regeneration Next, it is necessary to stimulate this plant material to regenerate as a new plant by encouraging the processes that cause the development of a new and complete plant. This can be done by placing the plant material in a suitably controlled environment, such as a cold frame or propagator. This will not only speed up regeneration but also lessen the chances of the plant material dying from rotting, disease or exhausted food reserves. A stem, for example, can also be encouraged to produce roots by dipping it in a rooting hormone or wounding it toward its base. The ability of plant material to regenerate is also influenced by the different seasons. Always, therefore, propagate a plant during the season recommended by this book. Ensuring its survival Once the plant material is in its propagating environment, it is vital to ensure its survival until it becomes established. The only way to do this is by maintaining absolute hygiene in the propagating environment and by thoroughly cleaning all tools and equipment. Also, treat the plant material with a fungicide such as Captan or Benlate,

and protect it with a general or specific pesticide. The shorter this survival period the less time there is for things to go wrong. Establishing the new plant As soon as the plant material has regenerated, the last phase in successful propagation is the establishment of this young material as an integrated, self-supporting new plant. W h e n any cutting, such as a leaf or stem, is taken, the new parts that are required to form a complete new plant will need time to become fully integrated with the original cutting. Just because a stem cutting produces roots does not imply a new plantboth systems must grow sympathetically so that a balanced and integrated growth is achieved. It is often relatively simple to persuade a cutting to regenerate a missing part, but it is more difficult to establish the plant material. This has to be done by weaning it from its protected environment and hardening it off until it is a self-supporting individual that can grow happily in a normal environment, whether this is indoors or outdoors. This is often the hardest part of plant propagation. The path of success Provided the gardener uses this book to understand the principles and basic practical tasks of plant propagation and then follows his judgment in relation to a particular plant, he can always approach propagation with confidence. It is this last factor that underlies all aspects of successful propagation.

To propagate plants successfully, it is necessary to have a clean and tidy working area, efficient and effective tools and equipment and to follow a standardized procedure. Failure in any part of the system leads to frustration and, more importantly, delays that will reduce the probability of success. Most important of the gardener's special tools and equipment for plant propagation are a sharp knife, a pair of shears, a dibble, suitable compost and a selection of pots and seed trays. Not all tools or fancy bits of equipment will necessarily enhance the success of propagation, but the important ones will because they make the gardener's job easier, and if the job is easier it often succeeds more readily. The use of suitable tools gives the plant material the very best start. To avoid tearing and crushing, for example, always use a sharp knife or razor blade and a clean sheet of glass when preparing a softwood cutting for planting. If the plant material is damaged, it will die and become a site for possible rots to infect the cutting. By the same token it is important Basic tools and equipment Knives (1), safety razor blades (2) and shears (3) Sharpening stone (4) Oil for lubrication (5) Cleaning rags (6), solvent (7) and emery paper (8) Pressers (various) for firming compost (9) Dibbles (10) Sieve 1/8in mesh) (11) Labels and soft lead pencil (12) Notebook for records (13) Polyethylene bags and tape (14) Raffia, twine, etc. (15) Split canes 12 in or 15 in (16) Hand sprayer (17) Watering can (18) Fungicides (19) Pesticides (20) Rooting powders (21) Panes of glass for covering seed trays (22) Panes of glass for cutting (23) Pots (24) and seed trays (25) Composts (26) and fertilizer (27)

not to push a cutting into the compost; always first make a hole with a dibble of suitable size, and then plant the cutting in that hole. A dibble should be approximately the same diameter as the cutting to be planted. Although many people will use a kitchen table, drain-board or greenhouse bench, the most suitable place to make cuttings, graft or sow seeds is a bench in the garden shed with a convenient shelf for all the bits and pieces of equipment, tools, rooting powders, etc. The height of the bench will be a critical factor to the comfort of the gardener if considerable time is to be spent propagating or potting plants. Incorrectly sited benches will encourage or enhance backaches and cricks in the neck. It is also important to have good lighting placed directly over the workbench itself. Plant propagation in many ways is akin to surgery, and nowhere is there more routine and standardized procedure than in an operating theaterwhere all concentration is centered on the patient. Therefore the secret of success for a gardener lies in having all the required tools and equipment readily to hand and clean and in good working order, so that any technique of propagation can proceed smoothly and all concentration can be centered on the plant material. After use it is important to clean, service and restore all equipment to its correct place so that it is readily accessible.

The main problem in propagation is to ensure survival of the propagated material (be it seed, cutting or graft) until it establishes as a new young plant. If the correct material has been used at the start, and as long as any treatments or cuts have been made correctly, then success is directly related to the control of the environment. The quicker the regenerative processes can be induced the less chance there is for things to go wrong. In plant propagation there are t w o environments: the aerial environment, which can be broken down into humidity, temperature, gaseous balance and light transmission; and the environment of the medium (soil and compost), which covers temperature, moisture status, aeration and its reaction (acidity/ alkalinity). Any equipment therefore should be measured in relation to the effect it has on these factors. An ideal environment is one that allows minimum water loss from the plant material, cool air temperatures, adequate light penetration for photosynthesis, a normal atmospheric balance between compost and air, good drainage and warm soil/compost t e m peratures with a neutral acidity/alkalinity reaction. The degree to which a particular system of environmental control operates will limit the propagation techniques that can be used successfully within it. In general, the "softer" or less hardy the plant material the greater will be the degree of environmental control needed to achieve success. The vagaries of the normal climate are too great for all but the easiest and hardiest plants to be propagated successfully outdoors.

Cold frames To provide initial control over the environment, place a box with a lid of glass on ordinary soil. This cold frame environment helps to increase soil temperatures, reduce temperature fluctuation, maintain humidity and allow light penetration, and it can be used for the propagation of a wide range of hardy plants. Its main disadvantage, which is shared with all enclosed environments, is that air temperatures build up when conditions are sunny. This necessitates either airing the frame to reduce the temperature, and thereby losing humidity, or shading the glass to cut down the light input, and so reducing photosynthesis. There are many plastics substitutes used in place of glass, but because of their heat/light transmission characteristics they are less satisfactory in the late autumn to spring period as they do not conserve heat so effectively as glass. The most manageable cold frame to construct is made with "Dutch lights," which are single panes of glass held in separate wooden frames 4 ft 11 in long by 2 ft 6 | i n wide. These can be laid side by side across a base frame with a distance between backboard and frontboard of 4 f t 9 in. For propagation the backboard is best made at a height of about 12 in and the frontboard at 9 in. The slope of the roof should be pitched in a southerly direction. The cold frame can be made more reliable by improved sealing of any cracks in the structure and by double glazing with t w o layers of "lights"the lid of a cold frame being called a "light."

Greenhouses The next step in the sequence of environmental control is the greenhouse, where slightly more sophisticated pieces of equipment for environmental control can be used. Greenhouses can, of course, be of a wide variety of shapes and sizes. Wooden-framed greenhouses are expensive to purchase, maintain and keep clean. Metal greenhouses are less expensive, cheaper to maintain and easier to keep clean, but unless they have an adequate internal structure they are subject to considerable distortion and damage if exposed to high-velocity winds. A closed case, which is a frame with a lid of glass in a greenhouse, provides a hightemperature system for propagation of house plants and less hardy subjects. Accurate control of temperature can be attained by installing a thermostatically controlled soilheating cable, which will provide bottom heat, into some sand at the base of the closed case. Mist propagation units The ultimate environmental control is provided by a mist unit. This is an open system that automatically maintains the moisture level while allowing the full penetration of light and the use of b o t t o m heat without an increase in air temperature. However, such a system requires both electricity and water in the greenhouse.

Propagators The alternative compromise is the so-called "propagator." This is a portable unit and can be used either in the greenhouse or indoors provided that adequate light is available. It consists of a fiberglass base fitted with a thermostat and heating cables and a Plexiglas-type dome, which provides the closed environment. All sorts of variations are available so make sure that the propagator you buy is sufficiently large for your needs.

Polyethylene tents and tunnels At the other extreme is a cheap and simple arrangement that provides a sufficiently effective closed environment for easily propagated plants. Place a polyethylene bag over the top of a pot or tray, and support it either by one or t w o bamboo rods or by a loop of wire with an end stuck in the compost; seal with a rubber band. Make a tunnel over plants outdoors by supporting polyethylene sheeting with wire and then sealing the ends.

Without doubt the most important piece of equipment needed by a gardener wishing to propagate plants is a knife. Choosing it is perhaps one of the most difficult decisions to make, as so much depends on what sort of work it will be required to carry out. For most tasks, a medium-weight knife with a sharp carbon-steel blade is best. For grafting, select a fairly heavy knife. A budding knife has a spatula end for prying open flaps of bark. It is a useful luxury an ordinary propagation knife is really quite adequate. For very soft cuttings from plants such as dahlias, chrysanthemums and penstemons the best tool is a single-edged razor blade (that is, a one-sided blade with a thick metal-covered edge on the opposite side). Most gardeners use a knife with a straight cutting blade, which is easy to sharpen, but some prefer a slightly curved blade. A knife with a very curved or hooked blade is not

suitable for plant propagation. It is also extremely difficult to sharpen. A knife should always be easy to open and comfortable to hold when in use. Especially with knives that may be required to cut tough material, the blade when opened should be set back into the handle. This avoids excessive play from side to side so that the blade does not loosen. Knife blades are either hollow ground on both sides or on one side only: both types are equally efficient. One-sided knives are usually made in both right-handed and left-handed patterns. As a general rule the more expensive a knife is, the better is the quality of blade and overall design. A good-quaiity steel blade will maintain its sharp cutting edge considerably longer than one of poorer quality and is well worth the extra investment. Keep a knife just for propagation and do not use it for pruning, cutting string or the

1,001 other jobs for which an ordinary penknife is more than suitable. Cut soft wood against a clean pane of glass on the bench in the potting shed. Hard wood should be cut by holding the plant material in the left hand. With the knife blade below the stem and the right thumb above, make a shallow angled slice from beneath, drawing the right forearm backward and maintaining the gap between the right thumb and the blade. Never attempt to cut by pressing the blade toward the thumbit can have disastrous consequences. When using a knife for cutting plant material the blade will inevitably become clogged with resins and plant juices, and these will impair the cutting efficiency. Therefore after use clean the blade either with a rag dipped in a solvent such as gasoline or carbon tetrachloride or by rubbing the blade with a fine grade of emery paper.

Sharpening a knife To sharpen a knife successfully is often regarded as a difficult and specialist job, but in fact if a few basic rules are observed it is relatively simple provided that a straightbladed knife is used and that the sharpening is carried out on a broad, flat Carborundum stone with a coarse and fine side. The stone should be slightly lubricated with a light oil to aid easy movement. Push the blade gently along the coarse side of the stone; then repeat the movement. Give a final "rub" on its fine side. After several turns, repeat the operation on the other side of the blade. Always traverse the entire length of the stone so that it does not become unevenly worn. All sorts of curved and small sharpening stones are available, but for someone not used to sharpening knives they are difficult to handle and use effectively.

Although a sharp knife has always been regarded as the gardener's main cutting instrument for propagation, modern practice makes just as much use of a suitably designed pair of shears; and where these can be used, they are much more effective than a knife because they are quick and easy to use and because they are also less liable to cause injury to the plant material. A pair of shears can not only cope with the final cut on any stem that is firm and hard enough to cut cleanly but can also be used for the initial cutting of softer stems, which may at the final stage need to be trimmed carefully with a knife or razor blade. There are two basic shear designs: the "anvil" type and the "scissor" type. Anvil shears have one sharp blade, usually hollow ground on both sides, which cuts through the stem by "crushing" it against a broad flat surface (the anvil). Scissor shears also have one sharpened blade, but normally only the internal surface is ground flat. This blade cuts by rotating past the anvil blade as in a conventional pair of scissors. The scissor types are preferable simply because they make a cleaner cut and cause less crushing and bruising in the region of the cut. Other shear designs such as those with a ratchet action are not necessary for propagation. W h e n choosing a pair of shears ensure that their size is convenient, the handles feel comfortable, and that they are easy to operate. It is best to choose a spring-loaded pair so that they reopen automatically after each cutit is tedious to have to keep opening the blades for each incision. Select a pair with a catch that keeps the shears closed when out of use so they are not dangerous and the cutting edge is protected. Some types of shears have a sap groove, which helps to prevent the blades sticking. Like all tools for propagation, a pair of shears should ideally be kept only for this purpose to prevent the blades becoming prematurely blunt and ineffective. As with knives it is usually possible to judge shears on the basis of cost: expensive types are normally well designed, easy to dismantle and reassemble and have goodquaiity steel blades that retain their cutting edge for a long period.

Care and maintenance Shears, more than most tools, require constant maintenance if they are to remain effective. After each session wipe the blades w i t h a solvent such as gasoline or carbon tetrachloride and/or fine emery paper to clean off resins, plant juices and residues that otherwise may quickly impair the cutting edges. Then wipe the blades with light oil to prevent rusting, and similarly oil all the moving parts to keep them in good working order. The cutting blade will need periodical sharpening to maintain its edge, but this will be fairly infrequent if a good-quaiity pair was obtained initially and the blades are kept clean. Usually, good-quaiity shears are also marginally adjustable to maintain a good cutting action. The method of sharpening varies, but usually the shears are dismantled and the blade portion sharpened like a knife. In some makes the blade is disposable and is replaced

rather than sharpened. Always keep the leaflet that accompanies the tool and follow the manufacturer's instructions carefully. If no instructions are supplied, take the shears to an expert for sharpening. Making a clean cut When using shears it is important to notice where the cut is actually being made; the anvil blade is often quite thick and it is not always possible to see the actual cut when making it. Also, ensure that any cut is made with the anvil blade away from the proposed cut surface so any bruising is not incorporated in the propagated material. To make a clean cut, decisively squeeze the shear blades together. Never force shears to make a cut as this merely bends the blades, damages the hinge and probably the plant material as well. When dealing with a thick, hard stem move the blades round a bit after each cut until they cut through it.

Normally a pot is as deep as it is broad, but both three-quarter pots and half (or dwarf) potssometimes called pansare available. At the other extreme particularly deep pots called "Long Toms" are obtainable. Select a container that holds only sufficient compost for the task in hand.

A vital consideration when choosing a pot is its capacity for drainage. It is not necessary to crock pots if a well-drained compost is used, but the base of the pot must contain adequate drainage holes; by the same token if a capillary watering system is used then there must be adequate holes for the moisture to rise up into the compost from the capillary medium, be it sand or matting. Only the pot shown below left has adequate drainage.

compost as a 2 3/4|in square pot. However, square pots are a nuisance to fill as the gardener must be sure that the compost is pushed well into the corners. Another major initial consideration is whether to use rigid or nonrigid containers. Pots with rims tend to be more rigid than those without, and they are easier to stack. For propagation there is no substitute for rigidity, although nonrigid containers such as black polyethylene sleeve pots may be used at the potting-on stage. The problem with nonrigid containers is that their tendency to sag makes them a nuisance to fill. The material from which a pot is made is also important. Traditionally, pots were always made of clay, but considerations of cost, durability and weight (in that order) have now reduced their use. Nowadays most rigid pots are made of some form of plastics and these have the advantage of being cheap, lightweight and durable. Some plastic pots, however, become brittle in time with exposure to ultraviolet light. Polypropylene pots of heavy quality will generally provide best value. Plastic pots are also easily washed and stored, whereas clay pots require soaking.

scrubbing and sterilizing between use, which is time consuming. Because clay pots are porous, the compost dries out more quickly than it would in plastic pots, and so more day-to-day management is needed. Broad pots have greater stability, so, where a choice is available, look for a pot with a broad base and almost vertical sides. This shape also allows a greater volume of compost within the pot and therefore a more usable surface area.

Because of the problems of cost many gardeners use yoghurt cartons, vending machine cups, and cream and cheese containers instead of "proper" pots. These are quite satisfactory provided they are clean, have adequate drainage holes, and are used in conjunction with a suitable compost and management system.

Square pots make better use of space than round ones as they can be fitted together exactly to cover an area without any waste of bench or ground space. They also generally contain a greater volume of compost relative to their surface areaa conventional 31/2 in diameter round pot only contains as much

Pots A plant pot is perhaps the commonest piece of equipment that the gardener will need for propagation. By choosing only three or four sizes in the same pot range, tasks such as watering and day-to-day management become standardized and are thus easier.

Seed trays W h e n dealing with relatively large numbers of seedlings or cuttings, as happens often in the production of bedding plants, a tray may be a more suitable container than a pot. Traditionally a seed tray is made of softwood and its dimensions are 14 in by 81/2 in and, according to its required usage, either 2 in or 21/2 in deep. These trays are now relatively expensive to purchase and their expected life is fairly short as they rot easily. However, they have the distinct advantage of being firm and rigid. Plastic seed trays of the same basic dimensions are currently available in many different patterns. The most important characteristic is the degree of drainage permitted in these, and it is of paramount importance to ensure that this is adequate. The quality and variety of plastics used for making seed trays is extraordinarily variable; the best trays are those of a sufficiently thick quality to keep their shape when picked up at a corner and of a type not to become brittle on exposure to ultraviolet light. The advantage of plastics is, of course, their durability and that they can be readily cleaned. Plastic seed trays are also made in "half-tray" sizes measuring 6 in by 81/2 in and 2 in deep.

There are many other materials such as compressed peat, processed paper and expanded polystyrene used for seed trays, but they tend to require careful handling. Some trays are disposable, which overcomes the hygiene problem but inevitably increases the cost factor. Expanded polystyrene trays' with individual growing compartments for each seed or cutting retain warmth and so promote rapid growth. As with pots, many containers such as wooden " D u t c h " t o m a t o trays, fish boxes and molded polystyrene packaging can be substituted for conventional seed trays provided they have adequate drainage and they are properly cleaned before use. Peat pellets and soil blocks As an alternative to pots and trays it is possible to substitute a system that obviates their use: the idea simply being to plant out or pot on the entire unit. This is achieved by eliminating a pot altogether, either by using a peat compost, compressed into a pellet and contained within a net, that swells up when soaked with water, or by compressing the compost into blocks. These systems are useful, very effective and reduce the ultimate root disturbance to a

minimum, which means the growth of the young plants is not checked when they are transplanted. The compressed peat pellets as typified by the "Jiffy 7" are expensive but seem to work very well, and if used for small seedlings or sturdy cuttings appear almost to enhance rooting. The high initial cost of purchasing a soil block mold may deter many gardeners who do not propagate large quantities of cuttings and seedlings. It is best to make hexagonal soil blocks as they do not dry out so readily provided their sides touch each other. To make a soil block successfully it is important to ensure that the compost has the correct level of dampness. To test this, take a handful of moist compost. Squeeze gently but firmly; the compost should tend to crumble. If it falls apart, the material is too dry; if it does not start to crumble, it is too moist. Fill the mold with the compost, compressing it only until the particles form a block. Place the soil block on a tray and leave it to consolidate for 24 hours before inserting a seed or cutting. As the plant grows the roots hold the block together. Plant out as soon as the roots emerge through the sides of the soil block.

Basically a compost is a soil substitute for propagating and establishing plants. To carry out this function a compost requires certain propertiesto be well aerated, to retain water, to hold nutrients and to conduct warmth. Thus in constituting a compost the components used should be chosen to establish these particular conditions as well as maintaining them throughout the life of the compost. In order to prevent the occurrence of pests, diseases and weeds the component materials should also be sterile. The only component of a compost that is not initially sterile is the loam. To sterilize it place the loam in a broad, flat container such as a meat tin and put in the oven at 82C/ 180F for 30 minutes. Best results are obtained if the loam is dryish and if the tin is covered with foil so that the steam generated encourages the sterilizing effect. Cool and riddle the loam before use. Cuttings compost The formulation of a compost for rooting cuttings really only requires t w o considerations: the retention of sufficient moisture to help prevent desiccation of the cutting, and the provision of an aerating agent so that air can always circulate within the medium. Conventionally, peat has been used as the water-retentive component and, although various peats are available, sphagnum moss peat is best as it retains a good structure for a long period. For most reliable use and to achieve uniformity it should be riddled through a 1/4in sieve. Sand is used as the aerating agent, and it also allows adequate drainagepeat by itself tending to become waterlogged. In horticultural parlance sand usually means grit, and for these purposes a washed and crushed lime-free grit providing a particle size of between 1/8in and 1/16 in across is the most desirable. The particles should also be "sharp," that is they should not be rounded but have points and corners and thus be irregular in shape. Although these t w o components provide the basic compost they can be substituted with such items as sedge peat, well-weathered sawdust, perlite, vermiculite and graded coal dustin fact by any material that has suitable

physical properties, and that is chemically inactive and biologically more or less sterile. Cuttings composts are usually formulated by evenly mixing equal parts by volume of peat and grit, although it is often difficult to assess how much sieved peat there is in a particular mix. In the end there is no substitute to determining the "feel" of the c o m post and whether it has the right properties. Compost for germinating seedlings The composition of a compost for seedling germination does not differ greatly from that produced for cuttings, except that a little more attention needs to be paid to the nutrient and chemical aspects. The basic components are peat and sand and for germination pure and simple this is sufficient. However if the seedlings are to remain in the compost for some time, add loam to act as a buffer in holding nutrients and controlling drying out. The amount of sterilized loam required need not be great: a formula of 2 parts by volume peat, 2 parts sand and 1 part loam is satisfactory. As seeds are much more sensitive to the acidity in such a compost, lime in the form of ground limestone should be mixed in with the sand at the rate of 11/2 oz per bushel of compost. Although it is not usual to include complicated nutrient mixes in seed composts, it is important to ensure that sufficient phosphate is available. Therefore also mix 3/4oz superphosphate per bushel of compost in with the sand. Potting composts for growing on young plants The formulation of composts for the establishment and growing on of young plants follows on from seed composts in much the same pattern. It is necessary to prepare a compost that allows the development of a root system; contains adequate water to support the plants and sufficient nutrients not to check g r o w t h ; has a suitable acidity/ alkalinity status; and does not dry out too easily. Nowadays such composts are based on the use of peat, although traditionally the John Innes concepts were based on the use of

sterilized loam. The recommendation of loam as a base for composts has had to be discontinued because it is no longer feasible to obtain a standard material on which a recipe can be formulated. Peat is capable of being relatively standardized and so currently forms the basis. It is important, however, to realize that loam has a steadying and controlling influence on both water and nutrient availability that peat does not provide, and so peat-based (that is, loamless) composts require a higher degree of management and maintenance. Therefore it is prudent to use loam as a minor component merely to provide the buffering action and so ease management. In practice the aim is to produce a loamless compost with added l o a m ! Young plants also need nutrient in the compost and this should be added at the rate of 4 oz fertilizer base per bushel of compost unless the manufacturer recommends otherwise. There are, of course, many available proprietary brands of peat-based composts, all of which have been tried and tested successfully. Their main disadvantage is their capacity for drying out and the difficulty of rewetting a dried compost, although this latter factor is less of a problem if a wetting agent has been incorporated. Their chief advantage is that they are ready mixed and come packed in handy-sized plastic bags. If a peat-based compost proves difficult to rewet, then add a small quantity of wetting agent or spreader such as soft soap. Do not use wash-up liquids. How to mix composts The important aspect of mixing compost is to obtain an even and uniform end product. Thorough mixing of the ingredients is essential. It is also easier if you have a bushel or half-bushel box on which to base the formula as lime and fertilizers are normally added at a bushel rate. (A bushel is the amount that will fit into a box 22 in x 10 in x 10 in without compacting.) Evenly layer the ingredients into a pile on a clean concrete floor. The lime and fertilizers should be sprinkled into each sand layer. The whole should then be well mixed with a clean shovel.

Certain chemicals will promote or regulate growth responses in plants when used in minute dosages, and they are used by gardeners not only for plant propagation but also to achieve a variety of other responses, such as encouraging fruit trusses to set. These plant-growth-regulating substances work at very low concentrations and within very critical limits; a substance that sets fruits at one concentration and produces roots on stem cuttings at another may be used as a weedkiller at yet another. Thus it is exceedingly important to follow dosage instructions exactly in order to obtain the desired results. It is also important to realize that these chemicals do not constitute a panacea for success: they will not induce rooting responses if the inherent ability of the stem to produce roots is not present. Their action is merely to enhance the innate capacity of the stem to produce its roots both in greater quantities and quicker than might otherwise have been the case. If the stem cutting is propagated from a healthy plant and at the correct season, then the use of such hormones is usually of no advantage whatsoever. They should be used with knowledge, and only as and when they are likely to achieve an effect. The majority of rooting hormones available on the market are constituted as powders, the base simply being finely ground talc. Talcum powder is used because it is extremely soft and it lacks an abrasive quality, so causing no damage to the cutting. Mixed in with the talcum powder is the rooting hormone. Normally this is a chemical, B-indolyl-butyric acid, known as IBA. Occasionally either IAA (B-indolyl-acetic acid) or NAA (naphthoxy-acetic acid) is substituted. The concentration for hardwood cutting propagation is normally 0.8 percent IBA in talc; softwood concentrations are usually much lessabout a quarter of this figure. All-purpose hormone powders are usually based on NAA. In many cases fungicidal chemicals are also incorporated into the powders, so helping against any rots that may develop in the cuttings. Rooting hormones are also made up in liquid formulations, where the chemicals are

dissolved either in water or in an organic solvent such as alcohol. It is important to emphasize that these hormones should not be used on either leaf or root cuttings. For these cuttings chemicals are not yet commercially available to aid regeneration. How to apply rooting hormones In order to know how to apply rooting hormones, it is important to understand one or t w o basic premises. First, that the concentration of hormone applied to induce root formation is not the best concentration to cause root development. Second, although the hormone may be absorbed through the bark, most of the hormone will be taken up through the cut base of the stem cutting. In actually applying the hormone therefore take care to touch only the basal cut surface onto the powder so that no powder adheres to the outside of the stem; do not dip the cutting even as deep as 1 in. By applying the hormone the roots are induced to form, but if they emerge and come into contact with the hormone still on the bark this may cause the roots to die off. In many cases this does not happen totally, but it may cause losses in some plants or under certain conditions; it is prudent to adopt a system that is suitable for all plants. If there is difficulty in getting sufficient hormone powder to adhere to the cut surface at the base of the cutting then the cutting should first be dipped in water. This is an especially valuable hint with softwood cuttings, which will benefit from the water anyway. Make up water-based formulations by dissolving a pill in a specified amount of water. Then stand the base of the cutting in the solution for 12-24 hours. As the concentration of water-based rooting hormones is much lower than powder-based ones, the bark is not adversely affected and so the cutting can be left standing in any depth of the solution. If an alcohol-based solution is used, dip the base of the cutting in solution and allow to drain so that the alcohol can evaporate, leaving the hormone on the cuttings.

W O U N D I N G STEM CUTTINGS Since certain chemicals are capable of enhancing root production on a stem cutting, it is possible that other techniques may also cause a surge in natural hormone production that could improve rooting. In some plants there exists in the stem between the bark tissues and the w o o d tissues a sheath of material that is capable of inhibiting root development. However, when part of this sheath is damaged, then roots will be produced normally. This damage is achieved by a technique known as wounding. The commonest method of wounding is to remove a slice of bark from the b o t t o m inch or so of the cutting, using a sharp

knife so that the wood tissues are just exposed. Alternatively make three or four 1 in long incisions in the bark at the base of the cutting as deep as the wood tissues. The technique of wounding can be very effective with rhododendron, daphne and juniper, but it is unwise to use it as a matter of course as it provides another possible site for infection and rotting. It may only be necessary on older, hardwood cuttings; softwood cuttings do not normally require wounding. The need to wound a cutting will only be discovered in the light of experiencea continued failure to root a cutting, which cannot be attributed to any other cause, may then suggest that the cutting may respond to wounding.

The use of water to maintain growth in potted plants is seldom efficient. The main difficulty is that the gardener is unable to water as regularly, and in the correct quantities, as the plants ideally need. A number of automatic and semiautomatic systems are available, but their operation is only as effective as the equipment and its setup. For propagation, water is necessary for evaporation, so increasing the level of humidity; it is also required to maintain the turgidity both of a cutting without roots and of a plant by normal uptake by the roots. Moisten freshly potted seedlings and rooted cuttings with tepid water. Avoid cold water, which will only check growth and lower soil temperatures. If the local water is hard, it is better for the plants to use rainwater. Place a tank of water in a greenhouse where it will be warmed to the ambient temperature. The tank of water has the further advantage of providing an evaporating surface, which will help to maintain high levels of humidity in the greenhouse. The biggest problem facing the gardener is knowing when sufficient water has been

applied. To gain experience use a minimum number of pot types and sizes, and as far as possible stick to one compost formula so that experience of these limited conditions will improve watering technique. Watering from above with a rose, attached either to a watering can or a hose, will give a light rate of application. This helps prevent severe caking of the compost and so enhances penetration and free drainage. Water little and often, allowing the water to drain each time it reaches the rim of the pot or seed tray. Watering by a capillary system is usually an advantage to the gardener because it is difficult to overwater, although undue drying due to poor capillary contact may prove a problem until experience is gained. Capillary systems depend either on a proprietary matting, usually made of felt or fiberglass, or on a sand base. The former is easier to set up, but sand provides a more reliable contact. Line a tray that has raised sides with polyethylene sheeting. Puncture the polyethylene several times in a line around the sides within 1/2 in of the required surface level. Fill the recess with fine sand and

pour water over it. The holes will ensure the water does not reach higher than 1/2 in below the surface level of the sand. Make sure that any containers are set firmly onto the capillary bed so that the water can pass into the pot or seed tray without undue hindrance from air space between bed and compost.

If a compost is overwatered, allow it to dry out before watering again. Should a peat-based compost dry out and prove difficult to rewet, then add a drop or t w o of soft soap to the water to improve water penetration. In many peat-based composts a wetting agent is incorporated and a rewetting problem should not arise.

There is much misunderstanding of the role that plant nutrients play in the growth of the plant and hence they are often misused in the propagation and establishment phases of plant production. t h e three so-called major elements that are required for successful plant growth are nitrogen, potassium and phosphorus. These materials are needed in addition to carbon, hydrogen and oxygen as the basic building blocks of plant material. At a secondary level elements such as calcium, sulfur and magnesium are needed in fair quantities, while trace elements, which include iron, manganese, boron, molybdenum and cobalt, are used by the plant in small to minute quantities. Nitrogen is required wherever and whenever plant growth is anticipated. A shortage of available nitrogen is typified by the slow, stunted development of the plant and pale green leaves. It is usually taken up by the plant in the form of either nitrate or ammonium salts. Nitrogen's role in the plant is predominantly as a basic ingredient of protein and it is thus a necessary feature of developing new plant tissue. Often it is referred to as being "important for leafy growth," which is essentially true because leaves constitute a major part of plant tissue; however it is equally a necessary component of stem, root, flower and seed production. As a protein component it is also a vital feature of chromosome development. The role of potassium in the plant is rather less easily explained. Potash, as it is commonly called, is needed as a catalyst wherever chemical reactions occur. It is especially associated with the food-making process of photosynthesis and with supplying nourishment around the plant. This again explains its general association with "leafy growth." However potash is equally important in virtually all parts of the plant where chemical reactions are occurring. Potassium deficiency in plants is usually manifest when the edges of the leaves turn pale yellow, and as this discoloration moves inward the outer edges turn brown and appear scorched. Phosphorus, which is normally used in the form of phosphate, has two major roles to fulfil in plant growth. First it is an essential

component of those very specialized proteins that constitute the chromosomes. Second it is the basis on which the energy needed for plant growth and development is collected, transported and released within the various chemical reactions of the plant. A phosphate shortage is much more difficult and uncertain to describe especially when it is only a marginal amount, but generally stunted growth associated with a purple or red leaf discoloration is a typical s y m p t o m ; however a similar situation often arises with root damage caused by pests or rots. Most other plant nutrients occur in sufficient quantities as minor components or impurities in the main fertilizers, and they do not specifically need to be applied as individual fertilizers. The only two nutrients that may cause problems are magnesium and iron. The prime role of magnesium is in the formation of chlorophyll, the green coloring in the plant. A lack of it is typified by a yellowing of the older leaves as the plant transfers magnesium from its older parts to its newly created parts so causing the "chlorosis" in the old leaves. Iron has a similar function to magnesium but it is not reusable in the plant. Its deficiency causes the young leaves to turn yellow although the veins remain green, and by this characteristic it is possible to distinguish a shortage of this element from a magnesium deficiency. The correct use of fertilizer It is important to ensure that sufficient nutrients are available to young plants. If composts are correctly formulated they should contain an adequate amount. However, seedlings, for example, are germinated in a compost containing only phosphate; as soon as they begin to show green leaves they will benefit from feeding with nitrogen and potash to encourage growth. Although it is possible for the gardener to make up his own soluble feed it is far simpler and much more reliable to use one of the several proprietary brands of liquid feeds that are readily available. If a plant shows signs of, for example, potash deficiency, buy a proprietary brand of liquid fertilizer with a high balance of that particular

nutrient, and not one with only that nutrient in it, and use it as recommended. Organic fertilizers such as bonemeal and dried blood are too slow acting to have any real beneficial effect on a plant with a nutrient deficiency. In the closed environment of pot or seed tray, inorganic fertilizers such as nitrate of soda, sulfate of ammonia, sulfate of iron, sulfate of potash and superphosphate should also be avoided as they may have too drastic a chemical effect on the plant and also upset the balance of the other nutrients. If the gardener is plagued with regular magnesium deficiency substitute magnesian limestone (Dolomite limestone) for ordinary limestone in the compost. Acid-loving plants and ericaceous ones such as heathers and rhododendrons are liable to have an iron shortage and this can be treated with a chelated iron compound either in the compost or as a foliar feed. W h e n applying a foliar fertilizer, always follow the manufacturer's instructions exactly. Water the nutrients over the plant's leaves using a fine rose.

The greatest stumbling block to successful plant propagation is the loss of cuttings and seedlings from the action of various pests and diseases. In many cases this occurs because the gardener has failed to maintain good hygienic standards. A system for successful propagation must be based on regular prevention and control of all possible pathogens. It is not just a question of keeping the cuttings or seedlings free of such agencies; it is also necessary to practice good standards of hygiene in the potting and propagation environment, the containers and tools used for propagation, the composts, the propagating material itself and the subsequent husbandry practiced. Always keep a scrupulously clean and tidy workbench in the potting shed. Before leaving plants to propagate in a greenhouse, scrub out all of the nooks and crannies with a solution of disinfectant so all residual infection is eliminated. It is considerably easier to do this job effectively in a modern metalstructured greenhouse than in a traditional

wooden-structured greenhouse, so take extra trouble when cleaning the latter. The best time to do this is in the early winter, when the gardener's other activities in terms of propagation are at their lowest ebb. Once clean, any remaining problems can be controlled by the routine use of various fungicide and pesticide smoke canisters, which will permeate throughout the greenhouse. At this stage, especial attention, by the use of the requisite chemical, should be paid to the control of such agents as red spider mite, whitefly, sciarid flies, mildews and damping-off fungi. In order to avoid cross-infection in a propagating area, at the earliest opportunity always remove containers and spent compost that are not in use. Spent compost will provide a splendid home for the multiplication of both damping-off fungi and sciarid flies. Perhaps the chief cause of infection of compost-borne rots is in the use of dirty containers for propagation. It is of paramount importance to ensure that the containers are clean, not only of fungal spores but especially of weed seeds such as chickweed, bittercress and annual meadow grass. Their source of infection usually occurs in the "crusty" layer of soil and chemicals that occurs as a tidemark on pots and seed trays. Hence the containers should be scrubbed and washed with soap solution so that they are completely clean. Clay pots will also need soaking to ensure their cleanliness. It is important to wipe all tools absolutely clean after use to ensure they do not become a potential source of infection. The compost used for propagation must be sterile. Usually this is achieved by making up the compost from sterile ingredients. Peat, by its nature, is highly acidic and consequently to all intents and purposes is sterile. Sand should already be sterile, as will be the chemical additives. The only component that may have to be sterilized is the loam and this can be done in an oven at 82C/180F in a broad, flat container covered with foil so that the steam generated encourages the sterilizing process. It is important however to remember that while all these components are sterile when fresh, if they are left lying about open to the

elements they can no longer be considered to be sterile. All composts and their c o m ponents should be kept bagged and covered to maintain their reliability. Incidentally, do not attempt to reuse spent compost, even if sterilized, as the chemical balances will be out of proportion. The plant material itself must also be free of infectiondo not use diseased cuttings or grafting scions for propagation. As a precaution against disease, dip leafy cuttings in a dilute solution of fungicide such as Captan or Benlate. After they have been planted, it is a good precaution to water with another dilute solution of fungicide. Similarly, germinating seeds should be sprayed with Captan or a copper fungicide in an attempt to reduce damping-off diseases to a minimum. As cuttings and seedlings develop, regularly use aerosol sprays or smoke canisters of fungicides and pesticides as a routine precaution against possible infections of dampingoff diseases and mildews, and infestations of red spider mite, whitefly and sciarid flies.

Various pests may cause problems when propagating, but as they attack a wide range of host plants they need only be considered in a general way so that the gardener can recognize t h e m and treat them appropriately. W h e n infested propagating material, or a plant, is placed in a propagating environment, the increased levels of temperature and humidity often cause a population explosion. It is important, therefore, to propagate, whenever possible, from material that appears to be free of pests. It is safer, and often easier, to control pests on stock plants before taking cuttings rather than to treat the cuttings later before they have established themselves as plants. This is not always possible, however, and routine pest control measures should always be taken in the propagating area to combat invasions of pests from infected plants elsewhere in the greenhouse or garden. Aphids Insects, such as greenfly and blackfly, are invariably present in small populations on almost all plants during the growing season, and it is important to control them not only because they can debilitate plant material very quickly with a rapid population build-up but also because they may carry virus diseases. In a propagating area the most useful method of applying insecticides is by using aerosols, preferably in the evening. The most effective are those containing pirimicarb, pyrethrum, bioresmethrin or malathion. Do not spray with these chemicals when the plants are exposed to direct sunlight.

Red spider mites These are not, in fact, insects but are related to the spider. They have eight legs and are capable of spinning webs. Most of them are minute and are comparatively difficult to see, but because they normally occur in such vast quantities their collective action is readily apparent. A typical sign of their presence is for a yellow mottling to appear on some leaves. This discoloration gradually turns a rusty brown and is followed by a grayish sheen of web formation. It is in the propagating environment with its increased temperatures that populations of red spider mites can build up unchecked, and they can cause problems on plants as diverse as cucumber, cyclamen, dahlia and conifers. Available methods of control are not always effective as the most useful materials are also dangerous to humans. The easiest system is simply to keep populations to a minimum by reducing the mites' hibernation stage by routinely scrubbing down all propagating areas during the winter. However, outbreaks will occur, and spraying at regular intervals with chemicals containing dimethoate and malathion, or the use of Derris in liquid formulation, will reduce the infestation.

posts. The adults are attracted by peat, especially when it is wet, and they will lay their eggs in it. The small white grubs that hatch then proceed to eat whatever is available in this situation usually the young, freshly succulent roots of a cutting or seedling. Most damage is caused when the compost is overwatered, so more eggs are laid and more roots are consumed. Therefore to control infestation of sciarid flies do not allow the compost to be continually soaked. Water little and often. Chemical control is not easy. The adults because of their mobility are virtually impossible to kill, and control is therefore limited to an attempt to eliminate the larvae. The incorporation of a granular insecticide in the compost will have some effect as a preventative. If an infestation occurs, the best results are achieved by drenching the compost, preferably with BHC.

hatch by routinely incorporating a powder insecticide in the compost when sowing and potting. The most effective insecticides are those containing BHC.

Glasshouse whiteflies These are one of the most troublesome pests of plants grown under glass. The small, white, mothlike adults and the greenish-white scalelike larvae that occur on lower leaf surfaces both feed by sucking sap, and they excrete a sugary substance known as honeydew. This makes the foliage sticky and allows the growth of a black, sooty mold. The larvae are fairly tolerant of most insecticides, unlike the adults which can be controlled by insecticides containing pyrethrum, bioresmethrin or resmethrin.

Slugs and snails Vine weevils

The larvae of the vine weevil do much more damage than is suspected, and although they are obviously not just pests of propagation areas they can nevertheless cause havoc in newly potted young plants. If any seedlings or young plants collapse suddenly, they have most likely been attacked by vine weevils. The adult weevil lays its eggs in soil or c o m post. The grubs that hatch are white with a brown head, and they feed on nearby roots. In recent years vine weevils have become more of a problem as they no longer show the pronounced seasonality in their life cycle that had previously been assumed. The only satisfactory method of control is to attempt to kill the grubs just after they Slugs and snails feed on the seedlings of many crops. Routine use of slug bait should keep damage to a minimum. If there is a sudden infestation treat with metaldehyde.

Sciarid flies The movement of these very small blackbodied flies is more eye-catching than the flies themselves. They are a relatively new phenomenon and are probably associated with the increasing use of peat-based c o m -

A propagating environment often provides suitable conditions for the establishment and spread of certain diseases, but these should not become a major problem provided that correct hygienic procedures are followed. It is important for the gardener to recognize the symptoms of these diseases and to know how to apply the appropriate control measures. Gray mold This disease is caused by a fungus called Botrytis cinerea, from which it obtains its other common name, botrytis. It is an organism of general occurrence and is capable of varying degrees of parasitism. It thrives in cold, damp conditions, and it can be recognized by a brown area of rotting anywhere on a seedling or cutting, which eventually grows a covering of grayish mold. Once it obtains a foothold it is by no means easy to control its spread. To avoid an outbreak of gray mold, place any seedlings and cuttings in a wellventilated warm atmosphere and maintain strict levels of hygiene. If an infection occurs, the affected plants should be picked out carefully and destroyed. The remaining plants should then be sprayed with Captan, benomyl or thiophanate-methyl to cut down any further spread of the disease, but too regular use of the latter t w o fungicides could lead to the buildup of resistant strains of the fungus.

when threads of the fungus, which resemble fine cotton wool, spread rapidly in the soil or over the compost surface. As it comes into contact with seedlings the parasitic fungus penetrates the tissues, which then die. The problem is particularly acute as these fungi are always present in soil or compost and are capable of survival without parasitism. Old soil or compost, therefore, provides a source of infection and should never be reused for seed sowing or cuttings. The effects are compounded when seedling densities are high; if temperature conditions are too hot or too cold for strong seedling development; if ventilation is poor and the soil too d a m p ; and if the seedlings or cuttings suffer frost damage. The disease can be recognized when seedlings or cuttings suddenly die in patches. To avoid damping-off disease sow seeds at a correct density so that the seedlings are not overcrowded; give them plenty of light, air and warmth, and do not overwater. Spray the seedling area before germination with a solution of Captan or a copper fungicide. Further control may also be achieved after the seeds have emerged by spraying again with Captan or zineb. If damping-off diseases do become established, the seedlings or cuttings should be sprayed with Captan, which will limit the disease, or with a copper fungicide, which will usually kill it off. Unfortunately copper is toxic to some plants, so check the instructions carefully before applying a fungicide containing copper.

Rhizoctonia This particular fungus may cause many problems in horticulture. It is essentially a fungus that survives in the compost and infects and destroys plant material where the humidity is too high and the conditions t o o warm. In plant propagation the disease normally affects cuttings inserted in mist propagators, closed cases or in pots under polyethylene bags. It causes basal rot of the cuttings, and it is by no means easy to control once it has established itself in the propagating area. To prevent initial establishment of rhizoctonia, once or twice a year sterilize the propagating area. Always use equipment and containers that have been thoroughly cleaned when propagating and ensure the compost is fresh and sterile. If the infection does appear, pick out and destroy the diseased plants.

Damping-off diseases These are usually caused by a group of closely related fungi, although certain other organisms can cause damping-off. These fungi cause problems to germinating seedlings

Virus diseases Plants suffer from many diseases caused by minute living organisms called viruses. In most cases the plant merely tolerates the presence of the virus and exhibits certain symptoms indicating its presenceusually these symptoms are typified by a yellow mottling or mosaic effect on the leaves. These symptoms, however, should not be confused with the yellowing caused by magnesium or iron deficiencies (see page 15). The effect of virus diseases is usually simply to reduce the vigor of the plant. This reduction in vigor sometimes means that a plant produces very little suitable propagating material as its growth is weaker than that of a virus-free plant of the same species or variety. It is, however, unwise to propagate from any plant that you suspect is affected by virus as the virus will be passed on to any vegetatively propagated offspring.

Unfortunately it is not possible for gardeners to reduce or eliminate the disease from a virus-infected plant. All that can be done is to attempt to prevent the spread of the disease by digging up and burning the whole of the infected plant. Some virus diseases are carried by aphids that infect other plants when feeding; the spread of virus diseases to uninfected plants is therefore best controlled by the routine use of pesticide smoke canisters or sprays. Virus diseases can also be spread by eelworms in unsterilized soil, or merely by contact from, for example, a propagation knife, After cutting virus-infected plants a knife will be a fertile area for infection. Always disinfect propagation tools and your hands if virus diseases are suspected. The only satisfactory way to avoid trouble when propagating is by using plant material that is virus free. This is a counsel of perfection as it is not easy for the gardener to recognize with certainty virus symptoms in many plants. Although viruses may be passed on through the seed it is possible to raise fresh virus-free stock of certain plants, such as Daphne mezereum, where viruses do not appear to be transmitted by seed. Virus-free rootstocks are labelled EMIA, and they are available for some fruit trees and a few ornamental crabs and cherries. Some virus diseases, such as Daphne mosaic, can be recognized by holding the leaf up to the light and by identifying the mosaic pattern of lighter yellow color. Others are more difficult to recognize and may frequently be confused with mineral deficiency symptoms or even pest damage.

The successful propagation of plants from seeds is a highly improbable process considering the vast number of seeds produced by the parent plant and the relatively small number of plants that survive to maturity under natural circumstances. The gardener, therefore, must recognize all the possible limitations to success, and attempt to reduce or eliminate these and so produce an acceptable crop. Nevertheless, for the gardener, the technique of propagating plants from seed is a very worthwhile and satisfying exercise as it can be a prolific method of plant production. It is also gratifying to collect the bewildering variety of seeds in the garden w i t h o u t causing injury to the plantsan inevitable consequence of vegetative propagation. A seed is produced from the fertilization of the female part of a flower by pollen from the male section. Seed is the end product of the sexual process and as such produces a population of plants that exhibit variable characteristics. By a controlled breeding program, it is possible to eliminate the greater proportion of this variation and produce a population of seedlings that to all intents and purposes are similar. This is the usual practice in the production of bedding plants, vegetables and flower cropsthat is those plants with a short enough life cycle to allow an intensive breeding program. W o o d y plant seedlings are more variable because of their longer life cycle and their tendency to cross-pollinate in their natural habitat. Seeds are a resting and survival stage in the continuance of a plant's existence. Basically a seed consists of an embryo, which is the young plant at its most immature and in its simplest components; a food supply, which maintains the embryo throughout the resting period and provides the basis for further development when germination gets under way; and a seed coat, which acts as the protective component. The embryo consists of the young root system, or radicle; the young stem system, or plumule, which carries the seed leaves, or cotyledons (which may be adapted for food storage); and the hypocotyl, which is the junction between the root and shoot system. Examples of different

embryos are given below: one has the food stored in the endosperm; the other has the cotyledons adapted for food storage.

factorily, and as a general rule establish well. Dustlike seeds, such as those from rhododendrons and lobelia, have a low germination and survival rate. Seeds also vary greatly in the materials that they use as food reservesthat is the stored food in the seed. Those plants that store food as carbohydrates, such as elderberries, marigolds and laburnum, are generally stable and long-lived, and will withstand drying. Seeds that store food as fats or oils, for example peony, magnolia and chestnut seeds, deteriorate both with time and drying and so present problems of storage and survival. It is better to allow these seeds to mature on the plant and collect them just before dispersal.

Survival of drying, however, is not just a function of the stored f o o d ; it also reflects the condition of the seed coat and its ability to protect the seed. Plants, such as willows, with very poorly developed seed coats survive for only very short periods, while those plants, such as sweet peas, laburnum and lupine, with very hard, impermeable seed coats usually survive for considerable periods in a wide variety of conditions. The seeds of the Indian lotus {Nelumbo nucifera) are reputed to have retained viability in a peat bog for over one thousand years. The variation in characteristics of the seed, and more often the fruit, are endless; some seeds and fruits have large wings, hooks or other projections that provide an aid to dispersal, and these can easily be trimmed or rubbed off. The shape of a seed is designed so that, when it is dispersed, it will fall to the ground and lie in the best position for germination. Altering its shape may affect this characteristic, and so, when planting, try not to place a seed upside down. If incorrectly positioned the stem of the germinating seed may produce a kink.

There are a number of distinctions that can be made within seeds as a group. The enormous variation in the size of seeds will inevitably influence the success with which they are propagated. Large seeds, such as acorns, chestnuts and hazelnuts, are produced in small numbers, germinate satis-

Commercial seeds As well as being sold loose in packets, seeds are now available commercially in other forms that make sowing easier and more accurate. Pelleted seeds are coated with decomposable material which disintegrates when in contact with moisture. It is especially convenient to buy small seeds in this form as they are much easier to handle and sow. Seeds can also be purchased evenly spaced on a tape of decomposable paper or plastic. Just cut the tape to the required length and place it in a furrow 1/2in deep and then cover

with soil.

Although it is usual to buy seeds it is often quite possible for the gardener to collect, extract and store his own seeds. This is especially satisfactory with seeds from trees and shrubs, which are dealt with separately on pages 28-32. It is important to label each stock of seed at all stages. Unidentifiable seeds will be of little use, so write a nonperishable label and make sure it accompanies the seed lot through to packeting and sowing. Annual bedding plants are selected strains that have been line-bred to come true from seed. The problem in collecting seed to come true is that a plant may have been chancepollinated by a different variety or species, and so hybrid, atypical plants will be produced. Commercially, the seed is kept true to type by growing the parent plants in large isolated blocks. Certain plants, such as pansies, are self-pollinating and their seed can be collected with confidence that they will come true. Collecting and drying flower seeds Except for those seeds that are collected and sown "green," such as snowdrops and anemones, the majority of herbaceous plants are collected, dried and extracted, and stored. Their seeds should be collected as they become ripe and before they are dispersed.

This requires careful observation. If they are enclosed in some form of fruit, the job becomes much easier, because the seed is actually completed before the fruit matures to a stage of dispersal. The only problem then is to separate the seeds from the fruit. In most cases this involves drying, either in the sun, in a dry atmosphere or in an airing cabinet. If fruits are collected individually, they should be broken open and then spread on tissue paper in a shallow box or tray and left to dry. If whole flower heads are collected, bunch a few stems together and hang them up to dry with their heads enclosed in a brown paper bag that is lightly tied round the stems. As they dry, occasionally shake the bag so the seeds drop into it. W i t h small flower heads leave the neck of the brown paper bag open. Place them in a warm (21C'70F) environment. After drying, break up the seed capsules to free all the seed ana clean the seed lot; depending on its size it can be picked over, put through a sieve, or winnowed in a breeze. Large fleshy seeds such as those from cyclamen, lilies and hellebores will not usually respond well to drying, and it is better to allow them to mature on the plant and collect them just before dispersal.

Storing seeds The longer a seed is stored the more food is used in its survival; thus less food is available for the embryo at germination, and so germination becomes progressively less vigorous. Storage conditions should keep activity to a minimum. Seeds should be stored dry in linen bags, paper bags or packets, or cellophane envelopes; plastics such as polyethylene are not advisable for flower and vegetable seeds as they tend to conserve dampness if it is present. For storage of seeds from trees and shrubs see page 32. Always keep seeds dry and store them in a cool place such as a loft, cellar or possibly a refrigerator. If there is a danger of dampness from the environment, place the packets in a polyethylene bag for protection. If properly dried, most flower and vegetable seeds can be stored for t w o or three years at least, because they store their foods as carbohydrates. Fleshy seeds, however, store their foods as oils or fats and are, therefore, short-lived even under the best conditions: do not expect them to survive for more than twelve months. It is probably best to store these seeds at the moisture content at which they are dispersed, so place them in a polyethylene bag in a refrigerator.

GENETICS Plants grown from the seed of species or stable variants will come "true," that is be similar to the parents. If, however, one parent is unstable or normally propagated vegetatively, then the offspring will in all probability be of the normal forms of species and not of the variant. In plant breeding there is much use of the technique known as F1 hybridization. This is an involved process in which two true-breeding species, or stable variants of the species, are crossed to produce a hybrid generation (the first filial or F1 generation). The advantage of these hybrids is that they are often more vigorous than their parents and may have characteristics of height, form and color that make them more desirable. If these F1 hybrids cross, then their offspring, the F2 generation, will not be like the F1 hybrids but will revert to many characteristics of the original true-breeding, parents. Hence the F2 generation will not possess all the desirable characteristics that were present in the F1 generation and it is therefore necessary to produce F1 seed afresh each year.

To assist with germination and the establishment of a new plant, it is often helpful to soak seeds in water for 12-24 hours before being sown in a compost that will provide adequate aeration, sufficient water-holding capacity, a neutral acidity/alkalinity reaction and sufficient phosphate. Thus a "sowing" or "seed" compost should be used. Before choosing a pot, pan or tray decide how much seed is to be sown; the container should be large enough to allow the seedlings space to develop to the size at which they are to be pricked out. Heap the container with compost and then, to ensure it is evenly distributed and there are no air locks, very lightly firm it to

the corners and base using the fingers. Do not compact the compost. Using a sawing action, strike off the c o m post with a presser board or other piece of w o o d so that it is level with the top of the container. Then with a presser board that fits into the container, lightly and evenly firm the compost to 1/4-3/8 in below the rim, ensuring that the surface is level. The container is now prepared for sowing. The seeds should be sown evenly over the surface either by sowing large seeds one by one or gently shaking small seeds direct from the packet. W h e n shaking, keep the packet low over the compost to prevent the seeds being unevenly distributed. If the seeds are

very fine it is easier to distribute them evenly, and see where they are sown, if they are mixed thoroughly with some dry fine sand. Sow the seeds by shaking across the container, using about half the seeds; then turn the container through 90 degrees and sow the rest of the seeds in the same way. Gently shake some compost over the container through a 1/8in sieve so that an even and uniform layer covers the seeds. As a general rule seeds do not need to be covered by compost deeper than their own thickness. Finally label the seeds and water them in by standing the container in a shallow bath of water so that the water moves up by capillary action. Do not stand the container

in so much water that it overflows the rim onto the seeds and compost. After watering stand out to drain. Alternatively water the compost from above, using a watering can with a fine rose. Start pouring the water away from the container and once an even flow is attained direct it over the seeds; similarly, to stop, move the water away from the container and then stop the flow, so that no drops fall on to the compost. Cover the container with a piece of glass and place in a warm dark place, for example an airing cabinet. Otherwise, cover with glass and a sheet of paper and leave in any warm (2T'C/'70'F) environment.

Germination The germination of seeds covers the entire process, from subjecting a resting seed to suitable conditions to cause it to develop to the stage at which the seedling produces true leaves and establishes as a young plant. If a seed is subjected to the conditions required for germination, and it fails to germinate, despite the fact that it is alive, then the seed is described as being dormant (see pages 28-9). Water is vital to allow plant growth to get under way. So, if the seed has not been soaked before sowing, it is important that the compost should be watered immediately after sowing. Once the seed has sufficiently imbibed, the embryo inside the seed begins to produce root and stem systems, which eventually break out of the seed. To grow, the embryo uses its food reserves. W h e n oxygen is combined with carbohydrates in these food reserves, the energy necessary for growth is produced. Thus the germinating seed will have a massive oxygen

requirement, which can only be satisfied by a well-aerated environment within the compost. All growth processes within the seed are chemical reactions activated by the addition of water. To develop successfully, the seed needs an increasing quantity of water, and the compost must be capable of holding these amounts. As all the processes involved are basically chemical reactions they will obey normal physical rules, the simplest of which implies that the higher the temperature is raised, the faster will be the rate of the reaction. In practice, this means that the warmer seeds are kept, the quicker they will germinate. As all these reactions are taking place in a biological context, there are biological limitations as to how high the temperature can be raised. In practice there are also economic considerations, because high temperatures are costly to maintain. Experience suggests that a germination temperature of 2T^C/70F is a reasonable compromise for most flower and vegetable seeds, and this is why an airing cabinet is an excellent place for seeds to

germinate. For germination of tree and shrub seeds see page 35. To keep seeds moist and warm, cover the container with a sheet of glass so that water condenses on the glass and falls back into the compost. To minimize temperature fluctuations cover the glass with a sheet of paper. As soon as the seedlings emerge, both paper and glass should be removed. Spray the seedlings regularly with water and place them in a well-lit area, out of strong direct sunlight to avoid scorching. Spray germinating seeds with Captan or copper fungicides regularly or they may succumb to damping-off diseases. If the seedlings are to be kept in their container for some time they should be given a liquid fertilizer diluted according to manufacturer's instructions, because many seed composts contain only a phosphate fertilizer. Pricking out As soon as seedlings can be handled, transplant them into a more suitable compost, leaving enough space for unrestricted

development of the young plants. This is known as pricking out or potting on. Fill a container with John Innes No. 1 compost or a compost of similar structure (see page 12), and firm to the base with the tips of the fingers. Strike off compost level with the rim. Lightly firm w i t h presser board so that the compost is 1/4-3/8in below the rim of the container, which is now prepared. Water the seedlings; then loosen them by knocking the old container so that the c o m post comes away from the sides. Hold a seedling by its seed leaf and gently lift with the aid of a dibble, keeping its root system intact. Never hold the seedling by its stem. W i t h the dibble, make a hole in the fresh compost big enough to take the roots. Drop in the seedling and gently firm the compost back round the roots with the dibble. Repeat this operation for each seedling, spacing at 24-40 seedlings per tray. After the tray has been filled, water in the seedlings and return them to the warm environment (21C/70'T) so that they can reestablish as quickly as possible.

Hardening off After the seedlings have been pricked out, they have to be gradually weaned to a stage at which they can be planted out and survive cool temperatures, fluctuating water conditions and the effects of wind without their growth rate being affected. In the plant world this process is generally referred to as hardening off. Most seedlings will have been germinated in a protected environment during the early part of the year to produce a plant of sufficient size to be planted out as soon as the danger of frost is passed. Because so many seedlings are produced in the early part of the year, and they are not hardy, and in most gardens there is a premium on any space that provides sufficient protection, plants tend to be grown at a high density. The problem with crowding plants together is that an increase in fungal diseases both on the stems and leaves and in the compost is likely to result; the plants tend to become spindly as they compete for light; and the varying plants have different watering needs

so more day-to-day care and attention are needed, which is of course time consuming. Once the pricked-out seedlings have reestablished, move them to a cooler environment. For this purpose there is no real substitute for a cold frame, which should be kept firmly closed. Over the course of a few weeks increasingly air the frame during the day by raising the lid, until the frame is continually aired during the day and night: indeed the lid may be completely removed during the day if it is warm. Eventually the lid can be discarded altogether. Frosts as severe as 4C/25 F are sufficient to penetrate into the cold frame, so, if this level of cold is expected, provide some insulation to protect half-hardy plants. The best and most easily manageable insulation should be light yet thick; fibrous matting and similar materials are useful and effective. Regularly check the seedlings in the frame to ensure that they are not drying out excessively. They should not however receive too much water. If anything it is better to err on the side of dryness rather than risk water-

logging. Under these cooler conditions wet composts are increasingly susceptible to fungal root rots. Similarly, the close density of plants creates conditions under which leaf diseases are capable of taking hold. It is, therefore, important that all plants in the frame are sprayed regularly with a fungicide, either Captan, which will prevent the diseases spreading, or a systemic fungicide such as Benlate, which should prevent an outbreak of the diseases. Another aspect of seedling management is the necessity for feeding. Many pricked-out seedlings will spend several weeks in the potting compost before being finally transplanted, and there is no point in starving them and preventing them developing to an adequate size. Thus the seedlings should be regularly fed using a proprietary liquid fertilizer at the intervals stated on the manufacturer's instructions. Avoid excessive feeding as it will produce overvigorous plants that will check their growth on transplanting; it will also increase the risk of disease in the cold frame.

The sowing of bedding plant seeds is a relatively simple procedure and can be guaranteed, within reason, to produce a reliable and uniform crop of seedlings. The main stumbling block that the gardener will experience is knowing when to sow particular plants. The object is to produce, at the same time, all bedding plants

at the requisite size for planting out so that they will make a significant impact when in flower. The sequence of bedding plant sowing is governed primarily by the speed of germination and subsequently by the growth rate of the seedlings of each species. Thus slowdeveloping plants are sown early in the year

although it is important to remember that in the very early part of the year light intensity is usually poor and growth rates of seedlings will be proportionately depressed. Sow bedding plant seeds in a pan (dwarf pot) or a seed tray depending on the quantity of seed used. Because the seeds germinate relatively rapidly at warm temperatures, peatbased composts are quite satisfactory, and there are many proprietary brands available. Fill the container with compost, but keep it light and uncompacted so that drainage is maintained. The main problem with peatbased composts is that they tend to waterlog easily, causing both death of the seeds and poor seedling developmentsymptoms often associated with damping-off diseases and sciarid fly attacks. Many bedding plants, for example lobelia and Begonia semperflorens, have incredibly small, almost dustlike, seeds that are difficult to sow evenly and at a sufficiently low density. These should be thoroughly mixed with some dry, fine sand, so that an even distribution can be achieved. Covering with compost is not then necessary. W i t h the seed packet close to the container sprinkle the seeds evenly over the compost. Sow thinly to avoid having overcrowded seedlings later on. Sift just sufficient c o m -

post over the seeds to make an even cover. Label the container and water the seeds either by using a fine rose on a watering can or by standing the container in a basin of water. Add a fungicide such as Captan to the water. Cover with a sheet of glass to conserve moisture and place in a warm environment (21C/70F) to promote germination; at this stage light is not important. As soon as the seedlings emerge, place them in the light to encourage growth and remove the cover because excessive humidity among seedlings at this stage will lead to damping off. The temperature, however, should still be maintained at as warm a level as possible to encourage quick growth to a size at which the seedlings can be pricked out. As soon as the seedlings are large enough to handle, prick them out into individual pots or seed trays. Their growth will inevitably be checked when they are transplanted, but the smaller and less branched the root system is, the less damage and therefore check will be experienced. The main problem will be the likelihood of damping-off diseases. This can only be avoided by scrupulous hygiene, light sowing densities and regular sprays with fungicides such as Captan or copper-based chemicals.

The growing of herbaceous plants from seed is by no means as widely practiced as the growing of bedding plants or even alpines from seed. This is largely because most herbaceous plants are selected forms that require vegetative methods of propagation. However, there are many herbaceous plants, such as delphiniums and lupines, that can be grown successfully from seed. Most hardy herbaceous plants, and especially those that disperse their seeds in the late summer and autumn, will produce seeds that require a period of exposure to the cold to break their dormancy. Their seed is sown in autumn or winter in containers that are then left outdoors; germination should occur in the spring. Those plants that disperse their seeds in summer, after an early spring flowering, often do not show any dormancy conditions, especially if they are collected and sown slightly green. This kind of plant will then germinate quickly and establish a seedling before the onset of winter. Some herbaceous plants, and particularly members of the legume family, such as lupines, produce seed with a hard seed coat. This prevents the seed germinating until it decomposes sufficiently to allow the seed to take up water. To speed up germination, chip the seed coat with a single-edged razor blade

so that water can get in; alternatively, rub the seeds with a coarse emery paper or similar abrasive until the seed coat is sufficiently reduced to allow water uptake. Some herbaceous plants such as some lilies and peonies exhibit an unusual dormancy condition that delays seedling emergence. If the seeds are sown in the winter/spring period, the seeds germinate as the temperature warms up, but only a root system emerges. Exposure to a further winter's cold is necessary for the stem to develop. Therefore it is not until the second spring that the seedlings appear. For these plants failure should not be accepted until after the second spring; do not be tempted to throw them out if germination does not occur in the first season. Sowing herbaceous seeds Seeds should be sown in pans (dwarf pots) or seed trays, depending on the quantity of seed available. If the seeds are slow to germinate, fill the container with a loambased compost, which will maintain its structure over a long period despite being exposed to natural weather conditions. Peatbased compost will suffice for seeds sown in spring. Firm the compost to the corners and the base of container; then strike off the compost.

W i t h a presser board, firm the compost to 1/4-3/8in below the rim. If seeds are large, individually sow at recommended spacing. Otherwise, broadcast sow the seeds. After sowing, firm them into contact with the c o m post; then cover with grit if they are to stand out for the winter, or with sifted compost if germination will occur quickly. Label the container and water in the seeds. Stand out on any well-drained surface, if the seeds need

chilling. Otherwise place container in a warm (21C/70F) environment. Seedlings of herbaceous plants are susceptible to the various damping-off diseases. It is therefore important to water the emerging seedlings at regular intervals with a dilute solution of Captan or a copper fungicide. As soon as herbaceous plant seedlings are large enough to handle prick off into individual pots.

The propagation of trees and shrubs from seed is rewarding as it allows the gardener to practice a wide range of techniques that, if successful, produce something that has a long-lasting place in the garden or landscape. Although it is possible to purchase some tree and shrub seeds, these are limited to those kinds that can be successfully dried, so in most cases it is necessary for the gardener to collect his o w n seeds. It is important to emphasize that the seeds used for propagation will only produce the kind of offspring that their heredity warrants. Seeds collected from species will probably come true; if collected from selected varieties then the seedlings will normally be of the species, unless of hybrid origin (see page 20). For this reason all fruit trees, which are highly specialized forms, should not be propagated by seed but must be increased vegetatively. The chief problem associated with tree and shrub seeds is the presence of various kinds of dormancy, which in the extreme are sometimes combined and so present particular difficulties in getting the seeds to germinate.

Tree and shrub seeds are extraordinarily diverse in their shape and sizevarying from the fine dustlike seeds of rhododendron to the large nutlike seeds of the horse chestnut or the oak, from the flat disks of wisteria to the hairy "parachutes" of clematis. All these considerations have a bearing on an individual plant's ability to survive and germinate: large seeds with a large embryo should have a much greater chance of successfully germinating than small seeds, as they have a larger food reserve, and therefore more small seeds than large seeds need to be collected. Also affecting the quantity of seed to be collected will be the availability of seed from year to year. If this can be noted on a regular basis, it may give a guide for any storage requirements. Beech is an extreme example as it is reputed to produce good seed only once in "seven years"; other plants also have definite periodic responses. The gardener can either purchase his tree and shrub seeds from a reliable seedsman or he can visit gardens, parks and arboreta in the hope of coming upon some unusual tree

or shrub producing a crop of seeds. Gardeners are usually very generous with their plants and, if asked, will frequently be only too willing to give some seeds or cuttings. Dormancy If a seed is subjected to the conditions required for germination and it fails to germinate, despite the fact that it is alive, then the seed is described as being dormant. Seed dispersed in the late summer or autumn, without an inbuilt dormancy control, would normally germinate. The seedling would then have to survive unfavorable climatic conditions that more often than not would kill it. The plant has, therefore, developed a control mechanism that prevents the seed germinating until the onset of favorable conditions for germination and subsequent establishment. Although these controls benefit the plant and enhance the chances of successful seedling production, they present a very real problem to the gardener, who either has to wait for the dormancy to be broken naturally, which can

take a long time, or has to attempt to overcome the problem artificially, which may be difficult and complex. In woody plants there are three different kinds of dormancy. The simplest is that caused by the seed coat, which has thickened and hardened during the maturation of the seed. Its hardness stops water being taken up by the seed; therefore the embryo cannot imbibe and germination is prevented. In nature, this kind of dormancy is gradually reduced by bacteria and fungi in the soil decomposing the seed coat until it is no longer effective and water can be taken up. Dormancy may also be caused by an immature embryo, which requires a warm temperature in which to develop to a stage where germination can proceed. The commonest form of dormancy in the seeds of plants from temperate climates is a chemical inhibition to the embryo development. In nature, this dormancy is broken by normal exposure of a seed in the soil to winter's cold. This initiates a chain of events

that neutralizes the inhibitor chemical and so allows germination to proceed as soon as environmental conditions are suitable. If only one of these kinds of dormancy occurred in a seed then overcoming it, although a problem, would be comparatively simple. Many plants, however, exhibit c o m binations of these dormancy controls so that overcoming them is complicated and timeconsuming (see pages 32-3). Seeds that are obtained from sources other than the gardener's own collections are almost invariably dried; the process of ripening is fully complete and all the dormancy controls are inbuilt, so germination cannot proceed until these problems have been eliminated. However, for the gardener who is collecting his own seed it is possible to avoid the development of dormancy by collecting immature seed and preventing further drying. To do this, collect the seed when it is green to yellow to buff colored, and fruit as it just turns yellow. At this stage the seed coat and fruit are beginning to dry out and so develop

into the condition suitable for dispersal. It would appear that the dormancy controls develop at this stage. By collecting the seed when it is anatomically complete with its food reserves finished but before dormancy becomes built in, the hard seed coat is avoided and the chilling requirement is at a minimum (just enough to prevent germination until the spring). Thus for germination to occur in spring, the fruits of Daphne mezereum should be collected not in September but in early June, when they are small, hard and green. Complicated dormancy patterns which take a long time to overcome or require a complex artificial procedure can then be avoided. However, it is easy to gather seed that is too immature, which will prove disastrous. Once dormancy conditions are removed, the seed will germinate, provided that suitable conditions are maintained. A change in conditions, such as excessive heat or drying or a continued shortage of oxygen, will cause the development of secondary dormancy, which is extremely difficult to break down.

Buying seeds W h e n purchasing tree and shrub seeds there are few regulations which ensure the same degree of certainty in production that can be attributed to vegetable and flower seeds. Virtually no guarantees are available because the seedsmen themselves have often collected the seeds from the wild and they may be incorrectly labeled. Occasionally seed is collected which is void and so contains no embryo, even though the seed and fruit is perfectly formed when viewed externally. Seed collectors and wholesalers usually process seeds by drying them. This has t w o distinct disadvantages. First, the drying processes enhance the maturation of the seed and so produce deeper dormancy effects. Second, for those seeds that store their food reserves as oils or fats, the drying degenerates the food reserves and so produces a loss of viability. The extent to which viability is lost will depend on how much food is stored as oils or fats. Most nut seeds fall into this category. Despite these drawbacks, there are many seeds offered by seedsmen which are entirely

reliable and which are capable of surviving the drying processes without any detriment to their condition. The gardener can only learn by experience how drying affects different seeds. In many cases seedsmen do not even bother to offer seeds where there is doubt about their ability to survive the drying process. Collecting seeds The collection of seeds from trees and shrubs by the gardener has a number of advantages over buying seeds. The gardener knows the identity of the plant and that it is reasonably hardy, and he can have a clear idea of what conditions suit a particular species, having seen it growing. As so many aliens and exotics are of doubtful hardiness this is a worthwhile consideration, especially as purchased seeds probably come from a more southerly collection. A hardy parent does not necessarily produce hardy offspring, but it is more likely. Another advantage is that the gardener can collect seeds at the moment he deems correct

a situation that is of critical importance when green seeds are being collected to avoid a dormancy condition. Seeds that have been collected, processed and sown without drying will not suffer losses in viability. Finally the gardener has the advantage of choosing where he collects his seeds, and he should take them from those specimens which are regarded as desirable forms and are free from pests and diseases. Because the seeds may be the result of a chance pollination, it is not possible to expect seeds to come true, but at least, by attempting to provide a better genetic base, good forms have an increased chance of being produced. Seeds or fruits should always be collected in prime condition, and at all stages it is important to be able to identify the seeds. Therefore label all containers used for collecting, recording not only the name of the parent plant but also the place of origin and the date of collection so that this information may be used for comparisons. The label should always accompany a seed lot until it is sown, when the information should be

transferred to a permanent label. Always write labels with indelible ink. Seeds that are green or bulky should not be collected in large batches or be kept in the containers for too long as they are very prone to "heat u p " and this can very easily cause the embryo to die. These seeds and fruits should, therefore, be stored in small batches in polyethylene bags and kept cool in a refrigerator. Process and sow as quickly as possible. Large cones should be cut one at a time. W h e n collecting seeds it is useful to have both hands free, especially if it is necessary to stretch into trees. For this purpose a collecting bag is invaluable. This can be made very simply by cutting off the top half from a plastic fertilizer or compost sack. Tie t w o pieces of string to the upper corners of the remaining bottom half and then secure this around the waist. This kind of collecting bag is far superior to a basket or bucket as it is not bulky and will not get in the way. Do not substitute a burlap sack because squashy and fleshy fruits may soak through the burlap into the gardener's clothingan unpleasant and (literally) irritating experience.

Some seeds from trees and shrubs will have to be separated from their fruit component in order to facilitate sowing and storage. In certain cases it is also necessary to store seed either from collection to sowing or from year to year. Both these factors have a bearing on a seed's viability, that is the proportion of a seed sample w h i c h is alive at any time. The cleaning and extraction of seed from the fruit is often a tedious and time-consuming business, but it is necessary if seed is to be sown evenly. Large dry fruits in capsules should be sifted to separate the individual seeds from the capsules. Seeds that are shed direct from the fruits, as happens with many nut seeds such as oaks, chestnuts, hazelnuts, horse chestnuts and beech, are ready for sowing. It is simply a matter of picking them up. Winged fruits should be dried sufficiently to separate the wings, unless, as with maple, each wing has its own seed. Where the wing encloses the seed or seeds, such as w i t h cryptic fruited plants like hornbeam, then either each seed has to be picked out or the whole fruit has to be dried and the seed separated by rubbing and winnowing.

The extraction of seeds from berries or fleshy fruits depends on the size of the individual seeds and the texture of the flesh. Pome fruits such as crab apples, pears, medlars and quinces should have the flesh pared away before any attempt to extract the seeds is made. Separate relatively large seeds with soft flesh, for example berberis, by squashing with a presser board and then swirling the material and some water around a shallow dish. The seeds will tend to gravitate to the middle and the flesh to the outside. Then pick off any berry skin that remains with the seeds. Very fleshy fruits should also be macerated with a presser board before being left in a jar of warm water to ferment; keep in a warm place for a few days until the flesh ferments. Decant off any flesh that is floating, leaving seeds untouched in the bottom of the jar. Change the water two or three times to remove all the flesh. Then pick off any skin. Cones of conifers are one of the most satisfying fruits to deal with. Collect the cones before they begin to shed their seeds, and place t h e m in a paper bag in the airing cabinet. Shake regularly to separate the seeds.

Some cones, such as those from silver fir disintegrate and then the scales have to be separated. The gardener should never open cones by placing them in the oven as excessive drying can very easily cause the seeds to

die. Some cones, such as those from cedars, do not open readily in response to drying; instead put them in a saucepan containing hot water (7r-82C/160-180F) and maintain this temperature until the scales open up.

STORAGE The t w o main considerations concerning the storage of seeds from trees and shrubs are moisture content and temperature of storage. As it is not always possible for the gardener, without detailed information, to know which seeds fall into which groups, all seeds should be treated similarly as a standard procedure. Surface dry all extracted seed to avoid moisture between the seeds encouraging fungal rots. If the seeds are to be used within a couple of days, store them at room temperature in

a polyethylene bag to maintain the moisture content at which they were extracted or collected. This is especially relevant for plants that store their food as fats and oils. The cooler the seeds are kept the longer they remain alive and vigorous. So, for long-term storage, put the seeds in a polyethylene bag, label them, and then place them in a domestic refrigerator near the spot where it is coolest. The lower the temperature the more effective is storage, as long as the seeds are not frozen. Under these conditions seeds can be stored for several weeks.

Scarification Before sowing it is necessary to break the dormancy of seeds with hard seed coats, and this can be done artificially by the gardener so that germination will occur as soon as conditions are suitable. Commercially, the dormancy period is reduced by adding, concentrated acid to the seed coat, which then disintegrates. Simpler and safer methods are to be preferred, however. Seeds of a sufficient size to be handled individually can be chipped by cutting a portion of the hard seed coat away to expose the seed itself. It is not necessary to reduce or cut away all the seed coat but merely to allow enough to be removed so that water can enter. The seed will then swell and rupture the remainder of the hard seed coat. Smaller seeds and seeds with coats that do not lend themselves easily to chipping can

have their seed coats reduced by scarification. This is a fairly simple process in which the seeds are rubbed with an abrasive substance until the seed coat is eventually worn down to a level at which water will enter. Possibly the easiest way to scarify seeds is to take a jar w i t h a screw lid and line it with sandpaper. Place the seeds in the jar and then shake until the seed coat is sufficiently abraded to allow water uptake. Often a seed with a hard seed coat also needs to be chilled to break dormancy. In this case the seed is subjected to a warm temperature to reduce the,seed coat before being stratified (see page 33). As most seeds are shed in the autumn, this means that such seeds should be stored dry over winter in a warm environment, stratified in early summer and chilled during the following winter before being sown in the spring.

Stratification One of the commonest forms of dormancy found in seeds of trees, shrubs and flowers from the temperate regions is a biochemical control of embryo development, which has to be overcome by chilling. There are t w o parts to this process: the imbibition of the seed, and then its exposure to a period of cold. The simplest way to deal with the problem is to sow these seeds in the open ground, where they will receive natural chilling. In a mild winter, however, there will be insufficient cold to overcome the dormancy controls, and so germination will be delayed for twelve months following a further winter's cold. Thus to be sure of germination an artificial treatment known as stratification is required to complete the chilling process. To obtain a suitable medium for stratification, first sift dry sphagnum moss peat through a 1/4in sieve. Mix about 4 volumes of this peat with 1 volume of water to produce damp peat that just exudes water when

squeezed lightly in the hand. Then mix 4 volumes of this damp peat to 1 volume of seeds to give the seeds plenty of moisture. If the mixture looks compact, add 1 volume of grit to improve aeration. Place the mixture in a polyethylene bag and tie a label on the outside. Leave for t w o or three days in warmth while the seeds take up water and swell. The seeds are now ready for chilling. Place the bag in the refrigerator in the meat drawer, where the temperature will be lowest (but not freezing). Turn and shake the bag every week to prevent compaction and to maintain aeration around the seeds. The time needed for the seeds to chill is extraordinarily different and may vary from three to four weeks to 16 to 18 weeks depending on the species. Many seeds will not be bothered by an excess of chilling period as they simply sit and wait for the right conditions for germination in the spring, but some begin to germinate regardless of temperature once the required chilling period is complete.

HOT WATER TREATMENT Some seeds with hard or impermeable seed coats can be prepared for sowing by treating the seeds with hot water. This extracts sufficient "waterproofing" and allows the seed to take up water and swell. Using a ratio of 3 volumes water to 1 volume seeds, place the seeds in a shallow

dish and pour water that has just gone off the boil over them. Do not use more than this ratio of water otherwise the temperature will be too high for too long and this may cause damage to the embryo. Place the dish in a warm environment; leave for 24 hours. If the seeds do not swell, repeat the exercise.

An open ground seedbed is best for tree and shrub seedling propagation. Although it is quite possible to sow seeds in seed trays or pans (dwarf pots) containing compost, the quality of the compost will inevitably deteriorate and germination may be impaired after a considerable time outdoors. After germination, the seedlings should be left to establish for a growing season before transplanting, and the restrictive volume of a seed tray or pan may not allow adequate space for root or seedling development. Another drawback is that more day-to-day management is required for seedlings in seed trays and pans to ensure that watering is not substandard and that the seedlings have adequate nutrients. The advantage of the open ground seedbed is that it is self-sufficient and encourages unrestricted growth of seedlings. Nor does it need to be extensive as most seedlings can be intensively grown on a relatively small area: oaks and chestnuts at ten to twelve plants per square f o o t ; magnolias at 25 plants

per square foot; and conifers at 50 to 70 plants per square foot. The root system of many trees and shrubs is modified to live in association with a fungus that fulfills many of the functions of the root in exchange for food: this association is often obligatory on the plant and is necessary from an early stage for normal development. It is therefore important to ensure the presence of these fungi in the seedbed at germination, and leaf mold is a good source. The preparation of the seedbed should be carried out in winter so that the soil can be left rough and allowed to weather. In order to improve drainage, soil conditions, seed covering and ease of seedling maintenance, the level of the seedbed should be raised above the surrounding soil. Set up boards 8-9 in high round the proposed seedbed. Keep the width of the seedbed relatively narrow (say 3 ft) so that seeds can be sown evenly across it. At this width, covering the seeds and general maintenance is much easier.

Thoroughly dig the seedbed with a spade to a spit deep, incorporating peat and, if possible, leaf mould. If the soil is particularly heavy, also add grit. In spring, knock the seedbed down to a rough tilth. This encourages weed seeds to germinate. These can then be sprayed or hoed off, so reducing the problem of weeds later on. Prior to sowing, rake in a phosphate fertilizer at the rate of 4 oz to the square yard. Ensure the seedbed is level in order to facilitate sowing, and more especially seedbed watering. It also makes the depth of seed cover more easy to assess. Ideal sowing conditions The process of germination in tree and shrub seeds, as with any other seeds, should be encouraged to take place as quickly as possible so that the best use can be made of the available food reserves. Thus, tree and shrub seeds should be sown under the best possible conditions in a well-drained, aerated

seedbed with sufficient supplies of water and a warm environment. Germination is primarily dependent on water, and the seed must swell and become completely imbibed before biological activity can begin. After this stage, water is still allimportant as it forms the basis of all living processes causing germination. The seedbed, however, must not become waterlogged. Air, which contains oxygen, is also essential around the seed. Energy is necessary for growth, and it is produced when oxygen is used in the breakdown of the carbohydrate reserves of the seed. Thus, if conditions reduce available oxygen, germination is retarded. The other major factor that affects germination is temperature. All growth processes are chemical reactions and as such their rate is a function of temperature: the warmer the conditions, the faster the reaction. Thus the rate of germination is directly affected by the seedbed temperature, and it is best to sow seeds when soil temperatures are warming up in the spring.

Sowing densities Before sowing, it is necessary to discover the correct sowing density for the seeds to germinate and establish as healthy plants. It is as useless to sow too thinly and so waste space as it is to sow too thickly and have very small, useless seedlings that are liable to damp off. A desirable population will depend on the particular plant grown and its vigor. Once the desired seedling density has been decided, this figure is modified by two factors which will then determine the number of seeds to be sown. The first is the viability of

the seedsthat is the number of seeds that are alive and capable of producing new plants. Take a few seeds and, if possible, cut them open to see what percentage are viable. The second consideration that will affect the sowing density is a survival factor. As it is unlikely that all the live seeds will germinate and establish as seedlings, an estimate must be made of the likely losses, which may be caused by poor germination conditions, rots, pests and frost. In general, the larger the seed and the shorter the period between sowing and germination the greater chance it has of survival. Sowing in a seedbed Having arrived at a sowing rate and preferably on a still day, sow the seeds in the fine tilth of a well-prepared seedbed. Spot sow seeds that are large enough to be handled individually, spacing them evenly. To achieve an even distribution with smaller seeds, broadcast sow with your hand held just above the soil level so that bouncing is minimized. Once the seeds are sown, firm them into the seedbed so that there is intimate contact between seeds and soil and water uptake is enhanced. Then cover the seeds with grit, a shovelful at a time. Place the shovel as low over the seeds as possible.

and then retract it quickly, leaving the grit on the seedbed. This method reduces the possibility of the seeds bouncing. The grit, which should be about 1/2in deep, will provide a well-drained surface that will allow even percolation of water through to the soil and absorb the impact of raindrops without caking and splashing; it will also keep the seeds well aerated and make it easy to remove weeds. Finally, level the grit with the back of a rake, clearly label the seedbed and water in if conditions are dry. This seedbed with its grit covering will maintain the seeds for an extensive period despite exposure to all sorts of weather conditions. Protecting the seedlings W h e n seeds germinate they will be exposed to a number of deleterious influences which may reduce growth or even cause death. The chief of these ill-effects is wind, which causes stress in seedlings, reducing growth considerably. Watering will not necessarily alleviate the situation as the seedlings may not be able to take up water quickly enough to compensate for water lost. Therefore, shelter the seeds from wind by putting some 50 percent permeable mesh round the seedbed.

As soon as the seedlings emerge and produce green leaves, they will need feeding with nitrogen and potash to supplement the phosphate already in the seedbed. Although these nutrients can be supplied by topdressing with a granular fertilizer, it is better regularly to use a proprietary brand of liquid fertilizer at the recommended rate, applying a small amount frequently. free and shrub seedlings are extremely susceptible to damage from frost. In their natural habitat they would be protected by the woodland or scrub canopy, but in the seedbed they are completely exposed. Until the danger of frost damage is passed, therefore, they must be protected either by stretching netting with very small holes above the seedlings on a semipermanent basis or by spreading newspaper on top of the seedlings on those nights when frost is anticipated. In addition, it is vital to control pests and diseases such as greenfly, damping-off fungi and various mildews by spraying regularly with fungicides and pesticides. If the seedbed has been prepared adequately then few weeds should be present in the bed. Windblown weed seeds, however, will appear and germinate in the grit. Pull these out while they are still small and their roots are in the grit rather than the soil.

The propagation of plants from roots is a simple and rapid process that has on the whole been neglected. As long ago as 1662, John Evelyn wrote in his famous book Silva of the possibility, when a tree was dug up, of leaving some of its roots in situ to develop as new trees. By 1731 Philip Miller, in The Gardener's Dictionary, was describing the propagation of certain trees from root cuttings as an established practice amongst gardeners. Since then, although it has been demonstrated that it is possible to propagate in this way, the technique has never become standard, except in the case of a small number of mainly herbaceous plants. It appears to have been ignored largely because of the aura of uncertainty associated with the success of this technique. Such a technique, however, should be popular because large quantities of plants can be produced from a very small amount of propagating material. Therefore, it is necessary to sort out the relevant features involved in this kind of regeneration and determine a system that eliminates the greater proportion of the uncertainty. Initially, it is important to divide plants into two categories: those that will propagate from roots; and those (apparently) that will not. A plant that can produce adventitious shoot buds on its roots should be suitable for propagation from root cuttings, although ultimately this is not necessarily an indication of its ability to regenerate a completely new plant. W h e n the various plants capable of producing adventitious buds on their roots are categorized, it will be seen that the responses vary: some plants produce buds on their roots as a natural growth process, whereas others require some other agency to stimulate bud initiation. Some of them have buds that elongate and develop as shoots; others do not grow in this way. There are three relevant methods of propagating from roots: natural suckering and division; suckers from undisturbed, but isolated, roots; and root cuttings. W h e n a plant is lifted, inevitably some roots are severed and remain undisturbed in the soil. During the subsequent late winter

and spring, these roots will, if the plant is capable, develop suckers. These suckers, if left to establish, can then be lifted and replanted at the end of the growing season. Plants that are sometimes propagated this way include Rhus (the sumacs), Robinia, NATURAL SUCKERING Natural suckering occurs in some plants such as lilacs and cherries. The plants send up isolated shoots that develop their own root system. Toward the end of the growing season, sever the roots of a sucker from the parent plant and leave it to establish. After a few weeks, lift the sucker and transplant. If a grafted plant such as a rose sends up a sucker, it should be completely removed immediately. If this is not done, the grafted plant will be weakened as the sucker is from the rootstock and not f r o m . the cultivated variety.

Ailanthus, Rubus and Chaenomeles. However, most plants that regenerate in this way are also fairly easily propagated from root cuttings and, as the latter method makes better use of space, the former technique is not widely employed.

When to take root cuttings W h e n propagating plants from root cuttings it is vital to understand how seasonality affects the capacity of root cuttings to produce stem buds. The subject of " o n " and "off" seasons appears to have been virtually unconsidered until the mid-twentieth century. However, recent research has established that fluctuations in the ability of roots to produce stem buds do exist and that it is pointless to propagate while the plant's response is inhibited by adverse seasonal influences. It is this fluctuation in the capacity to propagate that has probably produced the uncertainty which has led to the propagation of plants from root cuttings being virtually ignored by nearly all gardeners. It is therefore necessary to determine whether the plant from which root cuttings are required does have different seasonal responses, and, if so, what is the best time to take cuttings. W i t h o u t prior guidance, the natural inclination for the gardener would be to take such cuttings in the growing season, but

experience has shown that this has met with little success; although results sometimes improved if cuttings were taken very early or very late in the season. A few plants can produce new plants equally well at any time of the year, but these are relatively u n c o m m o n . Perhaps the best example is the horseradish, which can make itself into a pernicious weed by virtue of this characteristic: when the roots are broken, it is capable of establishing itself as a new plant from each root piece. Virtually all other plants demonstrate a seasonal response. Early observations suggested that plants propagated most successfully during the winter, but experience has shown that, although this is typically true for woody plants, the real feature is not the winter but the dormant season. Many herbaceous plants and more especially alpine plants are not necessarily dormant during the winter. Some alpines, for example the Pasque flower {Pulsatilla vulgaris), start growing in the new year and if root cuttings are made after this period they do not respond; success is only achieved during their dormant

season, which is in the late summer and early autumn. Although propagation from root cuttings is likely to succeed throughout a plant's dormant season, it is best to keep to the midpart of that season, as a maximum response may not exist while the dormancy is still developing or once it is phasing out. Preparing the plant Before propagating from root cuttings, it is preferable to prepare the parent plant itself so that it will develop roots that will have a high capacity to regenerate stem buds and so produce new plants. This ability to produce adventitious stem buds on a severed root is already present in most plants, but it can be enhanced. Lift a healthy plant prior to the growing season and shorten any top growth. Reduce its root system by cutting off the roots close to the crown of the plant, using a knife. Then return the plant to the ground. The pruning upsets the natural root/shoot balance of the plant, and it will grow quickly during the following season to bring the plant back to its normal

equilibrium between root and shoot. As a result of this treatment the vigorous, quickly grown roots will exhibit a very high level of ability to develop stem buds. The roots will have developed fastest at the beginning of the season, and the rate will gradually have declined as the season progressed until, as the dormant season approached, growth will have ceased altogether. At the point where any root started its growth in the spring, and where it grew fastest, will also be where it has the greatest capacity to produce buds; in other words, there is a direct correlation between the rate at which a root grows and its ability to produce stem buds. If, therefore, plenty of root material is available, it is best to take a root cutting only from the top of the root where it began its development in the early spring. In order to obtain cutting material, lift the parent plant and shorten any top growth. Wash it free of soil either in a bucket of water, or by hosing it down. It is then possible to distinguish the young roots which are suitable for propagation. Cut these close to the crown

of the plant, at right angles to the root. Return the parent plant to the garden. Discard the thin root end by slicing with a sloping cut. Slice off any fibrous lateral roots on the cutting to ease handling and planting later on. The removal of roots from the parent plant for propagation will have had the additional effect of root pruning and so will cause the development of further roots for propagation in the ensuing propagating season. Size of a root cutting The size of a root cutting may not be critical if only one cutting is made from each root, but, with roots that regenerate readily and from which it is possible to make more than one cutting, the optimum size of a root cutting becomes very important. It is therefore necessary to determine the minimum size for a root cutting so that maximum use can be made of the available root. The size of the root cutting depends on two factors. First, the cutting requires sufficient food to initiate and develop a stem bud to the stage at which it produces green

leaves and can begin to support itself. Second, the cutting requires sufficient food reserves to support itself while this regenerative process is going on. The size of the cutting, therefore, is made up of the regenerative portion and the survival portion. The size of the survival portion depends on how long the cutting will take to regenerate, and this is reliant on the temperature in which the cutting is propagated: the warmer the environment the quicker the stem will develop. A root cutting taken and planted in the open ground during the winter may not produce a shoot until May, but if it had been placed in a propagator in a temperature of 18-24C/65-75F, it might well have regenerated in about four weeks. The amount of food reserve required for survival between these t w o temperature environments is dramatically different. The size of the regenerative portion needed, however, will remain constant whatever the temperature of the propagating environment, so a rule of t h u m b measurement for the size of a root cutting is based on the variable factortemperature.

As a plant's roots will have been pruned a year before the cuttings are taken, all roots will show one year's growth and therefore be approximately the same thickness. Thus the cutting length is unaffected. An open-ground cutting should be at least 4 in long as it will need to survive for some 16 weeks. A cold frame/cold greenhouse provides a warmer environment, and regeneration will occur in about eight weeks and so a smaller survival portion is required and the cuttings need only be just over 2 in long. In a warm (18-24C/65-75F) greenhouse or propagator, regeneration time is reduced to four weeks, halving the survival time and the required food reserve once again so that in this environment root cuttings need only be about 1 in long. Recognizing the top of a root cutting W h e n propagating plants from root cuttings it is very important to notice the "polarity" of the cuttingthat it has a top and a bottom and therefore a "right way up." Most people suggest that root cuttings should be planted horizontally because the cuttings have been

made in such a way that the top and bottom cannot be recognized, and there is no other way in which polarity can be recognized because roots have no leaves and axillary buds. However, stem cuttings are not planted on their side, so it is unreasonable to expect root cuttings to be, no matter in what direction their roots subsequently grow. Cuttings planted vertically and the correct way up will usually develop to a maximum level provided that the cuttings were taken from a healthy plant and they were given suitable conditions (see page 40). Cuttings planted on their side rarely achieve more than a 40 percent success rate. In order to recognize the top of a root (that is, the end nearest the crown of the plant) so it can be planted the right way up, make a flat cut at right angles to the root where it was severed from its parent; at the bottom end cut away the thin portion using a sloping cut. Always cut roots in this way so, whatever subsequently happens to the root cutting, it will be possible to recognize its correct polarity and so ensure that it is planted the right way up.

Treatment After all the initial aspects have been c o n sidered and the root cutting has been made, the next step is to consider the question of what treatment the cutting may need in order to enhance its chances of producing a stem bud and then surviving until the bud develops and establishes as a new plant. At present there are no growth-promoting substances available for root cuttings, so that it is not possible to enhance bud production in this way. The special powders produced for inducing roots on stems should not be used on root cuttings as they will actually depress bud production. The best way to protect a root cutting is to treat it with a thin powder film of fungicide such as Captan. The root cutting, when planted, will be more or less completely surrounded by soil or compost and as such could easily become waterlogged and so subject to all sorts of fungal rots. The survival of the cutting will very much depend on protecting it against this possibility. Place the cuttings in a polyethylene bag, add some fungicidal powder, using about one teaspoonful of Captan for every 100 1 in

cuttings. "Balloon" the bag by twisting the top and then shake it vigorously. Once the cuttings are coated with a powder film, they are ready for planting. It will be apparent why it is important to be able to recognize the top and bottom of the cuttings after such processing. Planting Root cuttings need to be planted in a medium that will support them, prevent them drying out, allow adequate aeration and, when regeneration starts, provide basic nutrients. All these features can be found in the ground outdoors and the root cuttings will do well there provided that the soil is reasonably light or they are placed under a cold frame in soil to which peat and grit have been added. However, except perhaps for a few very vigorous herbaceous perennials, it is more convenient to plant root cuttings in a container and then plant them out just as soon as they are established. Select a container of suitable size for the number of root cuttings to be propagated, allowing 1-11/2 in for each cutting. For example, plant seven cuttings in a 31/2 in pot. Fill the

container with a peat-based compost containing loam, which will act as a buffer to prevent excessive drying and will maintain an even level of nutrients. Strike off the compost with a presser board so that it is level with the rim. Then press the soil down to at least f in below the rim of the container. Make a hole in the compost with a dibble and then plant the root cutting. Place the top of the cutting just level with the t o p of the compost. Firm back the compost around the cutting. Space the remaining root cuttings evenly round the container. Cover the cuttings with grit. Strike off with a presser board until the grit is level with the rim of the container. This weight of grit tends to compress the compost slightly so causing the tops of the cuttings to be pushed farther up into the grit. This will provide almost perfect aeration for the bud that will develop at the top of the root cutting. Do not water. Label the container and stand it in an environment (propagator, cold frame, etc.) that is appropriate to the size of the root cutting (see page 39). Some plants, for example Romneya coulteri, do not like being dug up and having their

roots disturbed. Therefore, place only one or t w o of their root cuttings in a small pot and treat as one plant, disturbing their roots as little as possible when transplanting them once they are established. Aftercare Keep watering to a minimum to maintain a well-aerated compost, which encourages bud development and reduces the likelihood of rotting. In fact there is probably no need to water at all if the root cuttings were initially planted in a reasonably moist compost and a humid environment is maintained. Very often when the bud first develops, it produces a stem and green leaves but no root system. This will grow later from the base of the new stem. Even if the new roots do develop from the cutting, they too will not appear until after the stem and green leaves have grown. Do not water until the roots appear as the cutting is still liable to rot. Place in a well-lit area once the stem appears. Harden off any young plants propagated in a warm (2TC/70F) environment before planting out or potting up. Apply a liquid fertilizer, according to the manufacturer's instructions.

Some herbaceous perennial plants die back to a crown of buds each dormant season, and their roots are modified to store food. These specialized swollen roots are described as tuberous roots. They can be distinguished from modified stems by their structure and from root cuttings by their inability to produce adventitious buds on isolated roots and so grow a new plant. There are t w o basic kinds of tuberous roots: those that develop annually, such as on dahlias, and those that are perennial and simply increase in size, such as on begonias. Annual tuberous roots develop from lateral roots at the crown of the plant. During the growing season, certain of these develop as food stores, swelling up and producing a cluster of such roots. Each year the new shoot system develops at the expense of the food store in the tuberous roots, which eventually die and disintegrate. Perennial tuberous roots are much simpler in their development. Usually the emerging radicle of the seedling begins to modify as a food storage organ, and this increases in size as and when food is available.

The division of tuberous roots is not a widely used technique as many plants with tuberous roots can be propagated more satisfactorily by stem, leaf and leaf bud cuttings. Success depends on how well the roots are stored. Lift the plant at the end of the growing season. Clean the crowns and dust with a fungicide. Wrap each plant in thick newspaper and place in a frost-free environment, below 5C/42F. Just before the growing season, divide the tuberous roots into portions, each with at least one crown bud, from which the new stem will develop. Protect all cut surfaces from rotting by dusting with a powder fungicide such as Thiram or Captan. Then place the divisions in a warm (21C/70"F), dry, airy area for a couple of days so that the cut surfaces seal themselves quickly by developing a corky layer of tissue, to give added protection. Pot up the divisions in John Innes No. 1 compost if they are to be transplanted within a month or so; otherwise plant them in John Innes No. 2 compost. Label t h e m ; do not water. Place in a frost-free area. Set in the light once a shoot appears.

A modified stem is an organ that stores food, which the plant can then use to survive its dormancy period. Also, it is often the means by which a plant can spread and produce new plants. To be classed among this group a modified stem must exhibit all the characteristics of a stem. It must have a stem structure: that is it will have an apical growing point; the stem itself will carry leaves with buds in their axils; and the arrangement of the leaves will be spiral, alternate or opposite each other.

The stem is modified from the normal in that it may not necessarily be above ground, it often grows more or less horizontally, and it usually acts as a food storage organ. There are basically only six kinds of modified stem, all with distinct habits and growth patterns. These are tubers, rhizomes, corms, bulbs, offsets and runners. They should not be confused with modified root systems, which do not possess all the features associated with a stem. A tuber, for example, has "eyes," which have a cluster of buds and a leaf scar. These are the nodes of a typical stem. They are arranged in a spiral, alternately or opposite each other beginning from the apical bud on the end opposite the scar where the tuber was attached to the parent plant.

A corm is the swollen base of a solid stem which is surrounded by scale leaves. These are attached to the stem at distinct nodes which have a bud in each axil. At the apex of the corm is a bud that will develop into the leaves and the flowering shoot.

An offset is a lateral shoot that develops from a leaf axil at the crown of a plant. This lateral shoot usually has only one bud, which develops into a plantlet with its own root and growing point.

A bulb, on the other hand, has a short, fleshy, usually vertical stem which, at its apex, has a growing point enclosed by thick, fleshy scale leaves. New bulbs develop in the axil of these scale leaves. The flower bud and foliage leaves grow up from the center

A runner also develops from the leaf axil at the crown of a plant. It grows horizontally and, at several of its nodes, forms new plantlets from the lateral buds. These new plants will develop a flowering point and also send out their own runners once they have established themselves.

of the bulb.
A rhizome is a specialized stem that grows horizontally just below the ground or on the surface. The stem appears segmented as it is composed of nodes and internodes, the leaves and flower bud developing from apical or lateral buds on the stem. Roots and a lateral shoot also grow from these points.

Frequently, modified stems are referred to as stolons, but this term has purposely been avoided in this book as it has a multiplicity of meanings.

The name "tuber" in horticultural terms has been much misused and has on occasions covered almost any swollen food storage organ that is chiefly underground. A tuber is, in fact, a swollen underground stem, modified as a food storage organ. It often is of roundish (usually terminating) growth and is normally annual. The leaves are scaly and membranous, and the axillary buds provide the following year's shoots. Within these limitations the number of plants producing true tubers is not very great. The commonest is the potato. Those plants, such as Jerusalem artichokes, that produce opposite rather than spirally arranged buds, such as potatoes, often have a knobby shape. Some water lilies [Nymphaea sp.) produce small tuberlike structures that develop from the main rootstock toward the end of the growing season. Although potatoes are prolific producers of tubers, this is unusual. Normally, plants that develop tubers do so only in very small numbers.

Any increase in numbers must be achieved artificially. As the tuber is normally an organ that allows a plant to survive its dormant period, the season to propagate tubers by artificial division should be just before growth , would commence in the spring. Cut the tuber with a sharp knife so that each piece has at least one good dominant bud or "eye." Then dust all the cut surfaces with a fungicide such as Captan to reduce the possibility of fungal infection. Stand the pieces on a wire tray and keep in a warm (21C/70F), dry environment, for example an airing cabinet, for a couple of days. A protective corky layer, which enhances their survival, will then develop. These tuber "seeds" should not be kept in the dry for any longer than necessary, otherwise the tuber itself will desiccate. Therefore plant them out immediately in a hole twice their depth. They will then quickly produce roots and shoots and establish as a new plant. Label them clearly at all stages of propagation.

A potato tuber is marked by a scar at one end, where it was attached to the parent plant, and by "eyes," or nodes, placed spirally over its surface.

A rhizome is a stem that grows laterally at or above the soil surface, although in some plants it is underground. Normally, a rhizome stores food, but the degree to which it does this varies from species to species. A rhizome is a perennial, and it is propagated artificially by division at an opportune season of the year: in most cases this is after flowering, when the rhizome is about to extend and produce new roots. It has t w o ways of growing. In one, typified by the German or bearded iris, a terminal bud develops and flowers; the plant sends out extension growth through a lateral bud. The following season, this extension growth develops its own terminal bud, which flowers, and the plant continues to extend through its lateral buds. In the other way of growing, typified by mint and couch grass, its extension growth develops continuously from the terminal bud and occasionally from a lateral bud, which usually produces flower spikes. In habit, rhizomes may also vary: " c r o w n " rhizomes, such as asparagus, have virtually no extension growth annually and develop as a spreading crown, whereas other kinds of rhizomes, such as mint, couch grass and

crabgrass, make rapid and continuous growth and spread over large areas of ground in a relatively short time. Perhaps the most prolific of garden plants to be propagated using rhizomes are bearded irises. The best time to divide their rhizomes and establish new plants is immediately after flowering, when the old root system dies down and a new root system begins to develop. Lift the clump of rhizomes with a fork and knock off as much soil as possible. Cut away and discard any old rhizomes, just leaving the current season's flushes of growth. Cut back their roots to 2-3 in, and shorten the leaf blades to reduce water loss before the new root systems develop. The prepared rhizomes are now ready for planting. As a general rule, a rhizome should be replanted at the same depth as it was growing; for irises this is more or less in the surface soil. Usually, a rhizome has two rows of roots longitudinally on each side underneath. Therefore, when replanting, dig out t w o linear shallow trenches and place the roots in these. Firm back the soil over these roots and label the rhizome clearly. If necessary, settle in by watering.

C R O W N RHIZOMES Less easy to propagate are the " c r o w n " rhizomes, such as peony and asparagus, which have what is traditionally referred to as herbaceous perennial rootstock. Fairly massive cuts are needed to divide such rootstock into suitable pieces for propagation: each piece requiring at least one well-developed bud. Divide crown rhizomes in late winter before the buds enlarge and before the new season's root system begins to develop. Make a few relatively large

divisions, unless quick bulking-up is essential, when it is better to plant small divisions in pots filled with John Innes No. 1 compost or similar (see page 12) in order to give them good conditions in which to become established. Dust the cut surfaces thoroughly with a fungicide to prevent bacterial and fungal rots. Leave them in a warm (21C/70F), dry atmosphere for the surface to dry out and develop the beginnings of a protective corky layer. Then plant out the divisions. Label them clearly.

Corms look very similar to bulbs and are often confused w i t h them. However, structurally they are very different. A corm consists of a stem that is swollen as a food store and that is shorter and broader than a bulb. The leaves of the stem are modified as thin, dry membranes that enclose the corm and protect it against injury and drying. Each leaf has a bud in its axil, the top of the stem usually develops as a flowering stem, and the roots are produced from the corm's base, which is often concave. In some kinds of corm, several buds at the top of the stem may grow out and flower. Each year a new corm develops around the base of each stem. Increase, therefore, is

directly related to the number of stems produced by a corm. Normally, most plants developing corms will propagate naturally to give a sufficient increase, but should it be necessary to bulk up supplies more quickly then an artificial technique should be used. Always buy corms from a reputable specialized grower, because it is vital to propagate from disease-free corms. Cut a large, healthy corm into several pieces just prior to the season for planting and ensure each piece has at least one bud. Dust the cut surfaces with a fungicidal powder such as Captan or Thiram, in order to reduce the risk of rotting. Set the pieces on a wire cake-tray and place in a warm, dry environment, such as an airing cabinet, for 48 hours. This will cause the cut surfaces to seal. Then plant singly in a pot or in the ground, and label clearly. If the corm is too small to cut up satisfactorily, then the lateral buds can be induced to develop more readily by removing the main stem either by snapping it off or digging it out with a knife. Then dust the cut surface with fungicidal powder and plant out the corm in the ground. During the growing season it will produce several shoots, which will eventually become new plants.

Cormels are miniature corms that are produced as offsets between the new corm and the old disintegrating corm. The quantity produced is very much a varietal featuregladiolus developing up to about 50 cormels. The level of cormel production will be influenced by the depth at which the main corm is planted; the deeper the corm is in the ground, the more cormels produced. Collect the cormels when the corm is lifted from the ground before winter and store them below 5C/41F in a dry, frost-free environment with air circulating round them. Soak any cormels that become dry in tepid water for 24 hours before planting the following season. Plant them outdoors close together and label. They will normally take t w o years to reach flowering size.

Bulbs are modified stems in which the scale leaves are modified for food storage. There are two kinds of bulbs, tunicate and scaly, and they differ in the development of their scale leaves. Tunicate bulbs Tunicate bulbs, such as daffodils and tulips (see below), have fleshy, very broad scale leaves, more or less surrounding the previous leaf so that the leaves make nearly complete concentric rings around the growing point. Each scale leaf has an axillary bud. The outer scale leaves become dry and m e m branous and give the bulb good protection against drying and injury. The roots of a tunicate bulb develop at the beginning of its growing season on the outside edge of the basal plate.

fleshy, but are often relatively narrow. The roots are produced in midsummer or later, and persist through to the following year.

eventually starts flowering. In some plants, notably tulips and bulbous irises (see below), the original bulb disintegrates after flowering, leaving a cluster of small bulbs as well as a new flowering bulb. In autumn, pull these apart and plant out at twice their own

depth.

Bulbils are tiny bulbs that grow in the leaf axils of stems, which are above ground, of certain species of lily such as L tigrinum. After flowering time, collect the bulbils off the plant as they mature. Set them 1 in apart in a pot filled with John Innes No. 1 compost or similar (see page 12). Cover with grit and place in a cold frame. In autumn of the following year, transplant the bulbils into the ground.

Natural bulb reproduction Bulbs propagate naturally by division and for some this is the only way they can be propagated. In the annual growth cycle the apical bud develops and produces a new bulb during the growing season. If an axillary bud develops into an active growing point, then this also develops as a bulb that may take a year or t w o of further growth before it separates from its original parent (see below) and

Bulblets are offsets that develop on some lilies, such as Lilium longiflorum and L bulbiferum, just below ground level either above or below the main bulb. In late summer, gently detach any bulblets and plant the bulb and bulblets straight into the ground at twice their own depth. Unfortunately, only a few species naturally grow bulblets in any quantity, although some other important species, such as L auratum, L speciosum and L tigrinum, do produce a small number.

Scaly bulbs Scaly bulbs, such as fritillaries, nomocharis and lilies (see below), do not develop a dry, membranous covering and are very much more susceptible to drying than tunicate bulbs. The leaves are normally scaly and very

To increase a particular variety of bulb rapidly it is necessary to use artificial techniques, because the natural rate of increase, although steady, is generally slow. O n e technique is to take leaf cuttings, although, with bulbs, these leaves are modified in the form of bulb scales and the technique is known as bulb scaling. Scaly bulbs, such as lilies and fritillaries, have relatively small, narrow scale leaves which can readily be pulled off the basal plate of the bulbs. W h e n they can best be propagated depends on the availability of bulbs. Ideally, it is easier to deal with fresh bulbs, and these are normally available in October/November. Imported bulbs are not usually available until January/March, and these will invariably have wilted slightly, which makes t h e m less than ideal as propagating material. Take cuttings from a fresh bulb in a turgid condition by pressing the scale leaves outwards until they snap off close to the basal plate of the bulb. W i t h a flaccid bulb, cut the scale leaves as close to the basal plate as possible, using a sharp knife. To propagate from one bulb, cut off only a few scale leaves from the outside of the bulb. Some bulbs, for example lilies, do not like being lifted and replanted; therefore dig

a hole around the bulb, break off some scales and replace the soil round the bulb. Any scale leaves will carry potential rotting agents and so they must be protected. Place the scales in a polyethylene bag filled with a fungicidal powder such as Captan. Shake the bag vigorously until the scale leaves are completely covered with a thin film of fungicide. Mix the scale leaves with four times their volume of an extending medium, which will allow them to develop in a damp, wellaerated environment. Various materials, such as damp vermiculite, can be used very successfully, but, provided that it is adequately sterile, a mixture of equal proportions of damp peat and grit is just as suitable. Place the mixture and a label in a polyethylene bag. Blow into the bag; when fully expanded, tie its neck. Store in a warm (21C/70F) place, such as an airing cabinet, so that new plantlets can develop. The rate at which regeneration occurs is related chiefly to temperature, but is also a varietal characteristicsome being quicker to propagate than others. Generally activity may be expected in about six to eight weeks. The new plant will initially take the form of a bulblet and will develop on the broken surface at the base of the scale leaf.

As soon as these bulblets appear, remove the scale leaves from their bag and plant them vertically in John Innes No. 1 potting compost or equivalent (see page 12). They can either be planted singly in a 3-31/2in pot or lined out into a deep tray, depending on numbers. Ensure the tips of the scales are just visible above the compost. Cover with

grit and label. Water sparingly. Keep the new plants in a warm (21" C/70"F), light environment. In early spring the bulblets will produce leaves above the compost. In summer, harden off the plants. At the end of the season, when the leaves have died down, lift and separate the new young bulbs. Replant immediately.

Some tunicate bulbs, such as hyacinth, grow larger each year and propagate very slowly by natural division of the bulb. They therefore have to be propagated artificially if a significant increase in numbers is required. The scale leaves of tunicate bulbs are large and encircle the bulb; they are not as readily removed from the basal plate as the leaves of scaly bulbs. It is therefore necessary to leave their cut scale leaves in situ while inducing them to produce plantlets. There are t w o ways of doing this: scooping and scoring. Scooping This is carried out toward the end of the bulb's dormant season. To scoop the bulb successfully, and with minimum damage, requires a special t o o l : an old teaspoon with one sharpened edge is excellent. Use it to cut out the basal plate in one scooping movement, leaving the rest of the bulb undisturbed and the cut surfaces of all the scale leaves exposed. Although it is possible to do this with a knife, it is inadvisable as the center of the bulb may become macerated and subject to rotting. Once the basal plate has been removed, dust the cut scale leaf surfaces liberally with a fungicidal powder to minimize potential rotting.

Set the bulb upside down, with the scale leaf bases exposed, on a wire tray or in a tray containing dry sand. Place in a temperature of at least 21C/70F to encourage calluses to form on the scale leaf bases and so further combat any chance of infection. At the same time, the bulb should be kept as dry as possible, but ensure that the scale leaves do not desiccate. An airing cabinet is probably a suitable environment, but dampen the sand occasionally. In about t w o to three months the new bulblets will develop on the cut surfaces of the scale leaves. Plant the bulb in a pot, still placing it upside down so that the bulblets are just below the surface of the compost. Label clearly. Harden off and then leave in a cold frame. In spring, the bulblets will grow and produce leaves and the old bulb will gradually disintegrate. At the end of the season lift and separate the bulblets, and replant. They will normally take a further three or four years before flowering size is reached. Scoring Flowering bulbs can be produced in a shorter time by using a similar technique called scoring, which makes fewer, larger bulblets as there are less cut scale leaf surfaces.

The process follows exactly the same pattern as for scooping except that, instead of cutting away the basal plate of the bulb, the basal plate is scored with a sharp knife. Cut through the basal plate of a tunicate bulb until the scale leaves are scored to a depth of about 1/4in. Make four equally spaced scores if the bulb is large; on smaller bulbs t w o scores at right angles will suffice.

Then place the scored bulb in a warm (21C/70F), dry environment for a day; this will cause the cuts to open out. Dust the cut surface with a fungicide such as Captan. Subsequently, the treatment is the same as for scooped bulbs. The bulblets produced in this way usually only require a further t w o or three years to reach flowering size.

Dividing a plant is a c o m m o n way to propagate many herbaceous perennials, and it is also used to rejuvenate favorite plants and keep them in a vigorous condition. Propagation by division is also successful with shrubs, such as sumac, that produce suckers; with semiwoody perennials, such as New Zealand flax, that produce a crown of offset shoots; and with most plants with modified stems, such as bearded iris (see pages 42-9). Herbaceous plants with fibrous crowns The commonest method of propagating plants by division is that used for herbaceous perennials, such as chrysanthemums, with fibrous roots and a relatively loose crown. Normally, the central part of the crown becomes woody over the course of two or three years. As this woody area does not produce many shoots and generally loses vigor, it is discarded and the remainder of the clump is divided into suitable-sized portions for planting out and reestablishing a new crown. The only variable feature of this form of propagation is the time at which division is carried out. As a general rule, the most

opportune time to divide such plants is directly after flowering, as this is when the new vegetative shoots are being produced and the new root system is developing. In very late-flowering subjects, this would be the following spring. Lift the parent plant and shake off as much soil as possible. Then wash the crown in a bucket, or hose it clean of any residual soil. The plant can be divided without this preliminary preparation, but it is much easier to deal with clean plants, especially if the soil is wet and muddy. Shorten any tall stems above the ground to prevent unnecessary water loss, especially if the division takes place in summer. Break off a piece with at least one good "eye" from the periphery of the crown, where the young shoots are generally produced; avoid the central woody crown, which is of no value and should be discarded. If the piece proves rather intractable to remove, cut it off, using an old carving knife or similar blade. Plant out the new clump as quickly as possible to the same depth as it was growing previously. W h e n replanted it should be labelled and watered inindeed "puddled" in would be more appropriate.

Herbaceous plants with fleshy crowns Many herbaceous plants, such as hostas, develop a compact, fleshy crown that is not easy to pull apart. The best way to propagate these plants is by division toward the end of their dormant season, when buds will begin to shoot, indicating the most vigorous areas. Lift the parent plant and shake off as much soil as possible. Wash the crown thoroughly. W i t h a convenient-sized knife, cut the crown into pieces. The size of divisions will depend on preference, but must include at least one developed shoot. Avoid latent buds, which do not always develop satisfactorily. Dust the cut surfaces with fungicidal powder to reduce the chances of fungal rots. Do not allow the divisions, especially from really fleshy rooted plants such as hostas, to dry excessively. Therefore replant the divisions either in the ground or in a pot as quickly as is feasible. Label them clearly. Naturally dividing alpines There are a number of alpine plants, such as campanulas, which lend themselves to propagation by division because their crowns

separate naturally into individual new plantlets each season. After flowering, or in the spring if the plant flowers in the autumn, as does Gentiana sino-ornata, lift the plant and tease apart the divisions. Replant as soon as possible. Label and water in well. This is a very simple but effective system of increasing plants. If the crowns are lifted and divided fairly frequently the rate of increase can be quite dramatic. However, plants left in situ for a long period tend to produce only a few large divisions. Semiwoody herbaceous plants Some perennials with upright, swordlike leaves, for example Phormium, increase in size by producing a sort of offset that develops into a large crown of individual shoots, each with its own root system. To propagate these plants, it is best to divide them in the spring, although it can be done at any time of the year. Lift them and shake out the .soil, if necessary hosing or washing the crown clean. Pull the various pieces apart. Cut the clump with a spade or hatchet if it is hard and woody in the middle.

and replant- the divisions fairly quickly to avoid the roots drying. Woody shrubs There are a few woody shrubs, such as blackthorn, that produce suckers, which then develop into individual clumps of stems. Lift these plants in the dormant season and wash thoroughly. Divide the clump of stems into convenient-sized portions. Normally the main core of the clump will be woody and will carry few roots. This will be of little value for propagation, purposes, so take the new pieces from the younger, more vigorous growth on the outside of the clump. Cut back the branches fairly drastically to reduce water loss, as the buds will break in the spring before sufficient roots have been produced. Replant the divisions back in the ground as soon as possible and label. Lift relatively isolated suckers individually in the dormant season and use to establish new plants. If the plant has been graftedas may happen with Japanese quincesthen it is the rootstock, not the cultivated variety, that is divided.

Plants, such as Michaelmas daisies, that produce particularly loose crowns can be propagated by separating off single stems on the periphery of the crown so that each has an adventitious root system. These single stem portions are described as "Irishman's cuttings," and they should be planted at once.

Offsets
An offset is a plantlet that has developed laterally on a stem either above or below ground: the stem arises from a crown bud and usually carries no other buds. Most plants, such as sempervivums, that produce offsets first grow a miniature plant with only minimal roots. A root system will not fully develop until late in the growing season. To speed up this process of propagation, pull away the offset from its parent, usually in spring. Either plant out in the garden or pot it up, using a cuttings compost with added grit, which will drain freely and so ensure good root development. Where offset development is poor, it is possible to stimulate offsets by removing the plant's growing tip. This has the same effect as removing a terminal bud.

Although the term offset is normally used for a plantlet that is separated from its parent during the growing season, it is also used to describe slower-developing shoots that are produced by mainly monocotyledonous plants such as yuccas. Eventually these shoots should be sufficiently mature to be separated from the parent and planted on. A pineapple plant produces offsets that can be used for propagation once its fruit is nearly mature. These offsets are variously described as slips, ratoons or suckers. Cut them off the plant close to the crown and plant out. Many corm and bulb plants, such as fritillarias, each year produce miniature reproductions of themselves from the bases of the newly developing corms or bulbs. These are known as cormels (see page 45) and bulbils and bulblets (see page 47).

Runners A runner is a more or less horizontal stem that arises from a crown bud and creeps overground. The leaves are normally scalelike, and rooting may occur at the nodes. The lateral buds develop as new plants, and eventually the stem of the runner deteriorates, leaving a new isolated plant. The classic

example of this kind of natural vegetative reproduction occurs in the strawberry plant. New plantlets usually root down and produce new plants quite successfully. However, unless controlled, a mat of new plants tends to develop, and these are not easily lifted and separated without damage, so thin out the runners regularly.

To produce large, well-established individual plants, dig in plenty of good compost for rooting; in early summer, thin out some of the runners, and pin down the rest into the compost, evenly radiating them around the plant. This method will induce early rooting, but the rate of development will not be quite as fast as for pot-grown runners.

These are obtained by placing a pot under each runner. Dig a hole in the ground beneath a developing plantlet. Set a pot containing good compost into it and then push back the soil to keep the pot in position. Pin down the runner, using wire bent in the shape of a staple, so that the plantlet will root in the pot.

The propagation of plants from stems is one of the most widely practiced techniques of vegetative propagation. The technique involves initiating, developing and establishing a root system on a stem either before or after that stem has been removed from the parent plant, and this can be done in t w o ways: by layering and by stem cuttings. W i t h layering, the stem is encouraged to produce roots before it is severed from the parent plant. The main problem is to establish the rooted layer after it has been removed from the parent. W i t h stem cuttings, the stem is removed from the parent plant before it is encouraged

to develop roots. W i t h this method, it is difficult to keep the cutting alive until its roots have grown and established. Its advantage is that, usually, it takes up much less space than propagating by layering. Always propagate from stems that have a high capacity to produce roots. The gardener must learn to judge this capacity in plants, as it has a significant effect on the eventual success of the layer or cutting. The age of the parent plant, as well as that of the actual stem to be propagated, both have major influences on the capacity of a stem to produce roots. A seedling that has recently germinated cannot immediately flower and produce

seeds, as it is not sexually mature. Therefore it is described as being juvenile, and the only way it can reproduce is asexually, from vegetative parts. Many juvenile plants have a very high capacity to regenerate vegetatively. The juvenile stage is not transient but fixed in some ornamental plants, such as some varieties of ivy {Hedera helix) and the Lawson's cypress varieties 'Ellwoodii' and 'Fletcheri,' and these have a greater capacity than their adult varieties to produce roots on stems. Juvenile plants, however, do not have much value in the garden as they do not flower and produce seed. Most of them will eventually mature into adult plants, when they will flower. In this condition a plant is sexually mature, capable of regenerating by producing seeds, and so it does not need to reproduce vegetatively. A plant's capacity to regenerate from vegetative parts declines with age. Thus the gardener wishing to propagate vegetatively from a mature plant encounters a problem. This can be overcome by growing a mature plant that does not produce flowers, so that its capacity to regenerate vegetatively may be increased, and thus the rooting capacity of its stems. To prevent the plant, or at least the stems used for propagation, from flowering, prune them rigorously so that strong, vegetative (that is nonflowering) shoots are produced. The harder the stems are pruned, the faster they will grow and the more they will produce roots. The first flush of growth on a stem always has the greatest capacity to develop roots. Really fast growth is achieved by a combination of hard pruning and forcing the plant in a high temperature, at least 16C/ 60"F. Under these conditions, roots may be induced on otherwise quite intractable stems. The capacity of a stem to root will also be dependent on the age of the parent plant. The older the plant, the less it will be able to produce roots on stems, even if the stem to be propagated has been severely pruned. If the plant has been grown from a seed by the gardener, then he will know how old it is, and if he can successfully propagate from it. If the plant to be propagated has been produced by a vegetative technique quite

recently, it should root from its stems quite readily, but this is not always so. Many plants, however recently they were vegetatively propagated, may in fact be quite old! If the original plant was grown from seed and displayed attractive ornamental characteristics, it would always have been propagated vegetatively to maintain those characteristics in subsequent generations, but its inherent capacity to produce roots on stems will have declined, despite a temporary resurgence after pruning. Thus new (that is, young) varieties are generally easier to propagate from stems than older varieties. This is particularly evident with plants such as deciduous azaleas, in which the old Ghent varieties are over 140 years old, the newer Ham varieties are only 20 years old, and the Exbury varieties are 40 years old. The last t w o groups are relatively easy to propagate from stems. Before propagating from stems, it is also necessary to consider whether there is a best time of year in which to propagate a particular plant by a particular technique, as it is pointless to do so in the wrong season. The capacity of many plants to produce roots on stems varies considerably during the different seasons, whereas in others there is no distinct seasonal variation. The index at the back of this book will tell the gardener when, where and how to propagate a particular plant.

Layering is one of the oldest techniques used by gardeners to propagate woody plants. A stem is encouraged to develop roots before it is removed from the parent plant. This method is easy as it avoids any complicated environmental control to ensure the stem survives while the root system is developing. The early gardeners had probably observed this process when it occurred naturally under certain conditions. To do it artificially they just repeated the conditions and modified the technique. As with any method of propagation, it is necessary to consider both the stem from which the layer is to be made and what soil is suitable to encourage rooting. The condition of the stem will have a significant effect on the eventual success of propagating by layering. For greatest success, the gardener should develop vigorous, rapidly grown stems with their high capacity -to produce roots. Certain methods of layering, such as stooling, encourage this capacity in stems as part of the normal system of management, but in others, such as simple layering, it is necessary to prepare the stems by pruning the parent plant well before propagation can take place. W h e n pruning bear in mind that, with most methods of layering, the branches to be layered will have to be brought down to ground level. The soil around the parent plant will also require preparation so that it will induce the stem to form roots. Rooting will be encouraged primarily by the exclusion of light, but also by the availability of oxygen and the presence of sufficient moisture and warmth. The exclusion of light from the stem, that is blanching it, is extremely important when encouraging roots to start growing. The sooner light is excluded from the stem, the more effective is the response. So, the earlier a stem is buried or earthed up the more likely it is to root. This effect cannot be overemphasized, as lateness in earthing up is probably the commonest reason why a stem fails to produce roots, provided that it is basically vigorous and capable of producing roots. The soil for layering must have a good water-holding capacity, good aeration and adequate drainage. Thus, especially if plants

are to be layered in an ordinary garden border as opposed to a purpose-developed layer bed, the soil must be dug deeply to provide good drainage and so reduce the chances of waterlogging. It can be further lightened and improved by the addition of peat and/or grit, depending on the heaviness of the soil. W a r m t h will improve rooting, so ensure the layered stem and soil are placed where they will receive adequate sunlight. However, warmth will only be effective if the soil is moist, so water the layered stems during dry periods. In most methods of layering, the soil should be carefully forked away from the layer once it has rooted, so it can be lifted. Do not allow the roots to dry out, otherwise they will die. Layers that may have difficulty rooting successfully should be well established before they are lifted. To encourage this, sever the newly rooted layers from the parent plant about three to four weeks prior to lifting and replanting. This weaning can be further enhanced by pruning the stems so that there is a greater balance of root to stem. Simple layering Simple layering is perhaps the easiest and most effective method of layering a wide variety of woody plants, and it is a technique that can be carried out with minimum disturbance to the parent plant. A stem is buried in the soil behind its tip so that roots are induced in this area. Once the root system is established, the stem can be severed from the parent. The roots are encouraged to develop because the plant foods and hormones are restricted where the stem is buried. To be successful, the gardener must use stems that have a high capacity to produce roots, and they should also be near ground level. Twelve or more months before layering, rigorously prune a low branch or branches on the parent plant so that young, rapidly grown shoots are produced. These will be more amenable to the bending and manipulation involved in the actual layering operation, and because of their rapid growth will have the required capacity to produce roots.

Layering is normally done in late winter/ early spring, as soon as the soil can be worked down to a tilth. As the technique is likely to be carried out in the garden and not in a purpose-prepared nursery bed, it is important to prepare the soil both thoroughly and effectively. Dig as deeply as possible. Then add peat and grit in sufficient quantities to convert the existing soil into a rooting medium with good waterholding capacity, good aeration and adequate drainage. Trim a rapidly grown stem of side-shoots and leaves for about 4-24 in behind the tip. Pull the stem to ground level and mark its position on the soil 9 in behind its tip. Dig a trench from that point, with one straight side about 4 - 6 in deep and the other sloping up to ground level near the parent plant. The secret of inducing root formation is to restrict movement of food and hormones in the tissues of the stem: this is usually achieved by bending the stem at least at a

right angle. However, in plants that are particularly difficult to root, the stem should first be girdled by cutting into the stem with a knife or by binding the stem tightly with a piece of copper wire at the bend. Bend the stem at right angles 9 in behind its tip and set it in the trench against the straight side with its tip exposed above the trench. If the stem is whippy, peg it down with heavy wire staples. Bury the stem with soil, firm in and water well. Keep the soil reasonably moist, especially in dry periods. Rooting will normally occur during the growing season, In autumn, sever the layered stem from the parent plant so that the new plant can .accustom itself to an independent existence. About three to four weeks later, cut off the growing tip to encourage the roots to establish. Pot up or plant out the layer and label it. If rooting is not well advanced by autumn, leave the layer to establish for a further year before lifting and transplanting it.

Air layering is one of the oldest artificial techniques of vegetative propagation. More than 4,000 years ago, it was tried in China and, because of its continued use in that country, it has traditionally been called Chinese layering. It is also sometimes referred to as marcottage from the great era of French gardening in the late seventeenth and eighteenth centuries. An unpruned stem on a normally growing woody plant is induced to develop roots by restricting the stem about 6-9 in behind its growing tip and then excluding light. This combination will cause the initiation of roots, and, if the roots are surrounded by moist, warm soil, then they will develop. The stem is then severed from the parent and established as a new plant. As a technique, air layering can be used on a wide range of plants that have w o o d y stems, and it is a useful way of producing plants without specialized equipment or disturbing them unduly. It is carried out either in spring on the matured w o o d of the previous season, in which case layering is close behind the growing point, or in the late summer on the hardening shoots of that season's growth. Select a stem of the current year's growth. Trim any side-shoots off the stem for about 6-12 in behind the tip.

Then girdle the stem (see page 54) so that food and hormones build up in the region where rooting is requiredusually about 9 in behind the tip. Treat the stem or the cut surfaces with hormone powder to improve rooting. The most effective rooting medium is sphagnum moss as it holds water, is well aerated and is readily manipulated. Soak the moss overnight so that it is completely moist. Take t w o large handfuls of moss and squeeze it, then work it into a ball so that all the fibers are interwoven. W h e n it reaches about 21/2 in in diameter, split it in half, using the thumbs in the same way that an orange is divided. Place the t w o halves around the treated area of the stem and knead them together again so that the moss stays firm. Hold the moss in place with a square of black polyethylene, and secure it to the stem with sticky insulating tape. It is important to ensure that moisture cannot run down into the moss and so waterlog it. So, turn the tape spirally round the ends of the polyethylene, overlapping it until it covers part of the stem. The black polyethylene will retain moisture, maintain a warm environment, exclude light and allow gases to permeate the moss. The layered stem will usually take at least a growing season to produce adequate roots.

Prune back any new growth on the rooted layer toward the end of the dormant season. Then cut off the stem with shears just below the point of layering and remove the black polyethylene square. The most critical stage when air layering is to establish the rooted layer successfully. Fill a pot with John Innes No. 1 compost or

similar (see page 12). Slightly loosen the moss ball and roots. Place the rooted layer in the pot. Firm so the roots are in contact with the compost. Do not firm too heavily and so compress the moss ball and roots. Label and place in a protected environment until further root growth develops and the new plant is established.

Tip layering is a specialized technique used for the various members of the genus Rubus, such as blackberries and loganberries. If the growing tip of such a plant is buried in the soil, it will naturally swell, develop roots and establish itself. This phenomenon is modified to suit the gardener. Tip layering is an invaluable technique for propagating a few plants, as it can be carried out in the garden on one part of a plant without disturbing the flowering or fruiting ability of the rest of it. The members of the genus Rubus, especially the fruiting varieties, are prone to virus infections, and they should be propagated only from known virus-free stocks.

Select a new strong stem as it develops from the crown of the plant during the spring. As soon as it reaches 15-18 in long, pinch out the tip to encourage branching. The growth of these stems is rapid and vigorous, and soon the stems can be pinched out again. Continue to do this until midsummer, when about six to eight tips should be well developed. It is at this stage that the stems can be layered. However, as the roots of these particular plants are fine, fibrous and easily damaged, the soil for layering should be well prepared so that once the layers have rooted they can be lifted with minimum damage to their root system.

Dig and cultivate the soil thoroughly, if possible dig in a deep layer of organic matter to conserve moisture and prevent the roots drying. Improve the top 6 in by adding some peat and grit. Pull down a stem and make a mark where its tip touches the ground. Start digging a trench at this spot, making it 4 in deep. Give it smoothed vertical sides except for one which should be sloped toward the parent plant. Smoothed vertical sides will help any shoots to grow vertically and so produce a manageable plant. Place the tip in the deepest part of the trench and pin it down with a heavy wire staple. Replace the soil, firm and water.

In about three weeks, shoots should appear above ground level. In September cut back the original stem at the crown of the parent plant, so that the layer can establish as an independent plant. Cut off the rest of the original stem and shorten the growing tip before lifting the rooted layer in autumn after leaf fall. Replant the layer immediately and label it. Protect any layers that cannot be replanted straight away by wrapping their roots in damp newspaper, which is then placed in a plastic bag. Close the bag and tie the neck tightly so the roots will,not dry out. Propagation by tip layering in this way can be repeated each year.

Stooling is an entirely artificial system of propagating plants by layering, because a plant is grown just to develop new plants, which it will do year after year. It is a technique that is principally used to produce specialized rootstocks that control the vigor and size of a tree, especially fruit trees. However it can be employed on any plant that will respond to severe annual pruning. Plant a rooted layer, cutting or seedling in well-cultivated ground and label it. Establish for one growing season. Never use a plant that has been grafted as it will reproduce the rootstock and not the grafted variety. All clonal fruit-tree rootstocks should be designated EMLA, which indicates they are free from virus disease. During the early part of the dormant season, cut back the rootstock, leaving about 1-2 in of the stem above ground level. In the following spring, earth up any shoots as soon as they are about 6 in long, so that the whole plant is covered. W o r k the soil down between the shoots so that each shoot is completely surrounded by soil. Do not delay earthing up as one of the most critical factors in stooling is excluding light from the plant at an early stage.

As the shoots grow, continue to earth them up until each shoot is buried to about 9 in. No further action will now be necessary, unless the summer is particularly dry, when the soil should be watered to encourage the roots to develop. Just keep the soil around the stems warm and moist. Too much water will depress temperatures. In early winter, after the leaves have fallen and the shoots are fully dormant, gently fork away the soil back down to the original level, so exposing the stool and its shoots. The base of each shoot should have produced roots. Remove these rooted layers from the parent stool. W i t h a pair of shears cut them flush with the stool, so that no stub remains. Replant them immediately and label them clearly. After removing and replanting the rooted layers, cultivate the soil around the stool and clean off any residual earth on the stool itself so that it is fully exposed to the elements. This is necessary to ensure that the buds receive adequate winter chilling and will therefore break evenly the following spring, when the whole process is repeated, except that a general fertilizer is added at about 4 oz to the square yard. Successful production will depend on looking after the stool.

French layering is an extension of stooling and, as such, it also requires a specially grown plant from which new plants can develop. Like stooling, it produces an annual crop of rooted layers, but initially it takes longer for the sequence to become established. Cultivate some ground by digging deeply and adding some organic matter, peat and grit. Plant a rooted layer and label it. Allow it to establish for a growing season. During the early part of the dormant season, cut it back to 1-2 in above ground level.

Leave the plant to grow undisturbed during the following growing season. After the leaves have dropped, reduce any shoots to a manageable numbersay, at the most, eight strong shoots. Cut back their tips so that each stem is the same length; then peg them down horizontally over the ground. By positioning the stems horizontally early in the winter, the buds will break evenly along the entire length of the shoots in spring. In spring, unpeg the stems when their shoots are about 2-3 in long. Cultivate the

ground. Space out the stems evenly in a star arrangement around the stool, and make a trench 2 in deep under each stem. Drop each stem into its trench and cover it until only the tips of the new shoots are exposed. Earth up the new shoots as they grow, always keeping the tips exposed, until the mound is about 6 in above ground level. Water the layers only if the weather is particularly dry. Do not overwater. The central stool meanwhile will be producing a fresh crop of shoots, and it is these

that will provide the next year's stems for pegging down. Gently fork away the soil mounds, after leaf fall. Cut away the rooted stems flush with the stool, avoiding the current year's growth. Divide each stem into individual plants with their own root systems. Plant these out immediately; label and water in. Reduce the current year's growth on the stool to, say, eight strong shoots, and prune to an equal length. Peg these down on the ground so that the sequence can continue.

This technique is used to propagate numerous heaths and heathers, dwarf rhododendrons and other related plants, and any shrub of suitable habit that is not readily propagated by other methods. A plant that is already mature, and possibly even straggly, is dug up with a reasonably sized root ball. It is then completely buried so only the tips of the branches show. These branches will root, and they are then lifted, separated, and planted out to establish as new plants. Dropping is not necessarily the most desirable method of propagating plants as often the resulting layers are less shapely than those produced by cuttings, but it is easy and simple to follow. Prepare a plant in the dormant season by pruning it rigorously to encourage new, strong-growing stems with a high capacity to produce roots. Older, nonpruned stems will respond less satisfactorily to propagation but will nevertheless usually regenerate. Dropping is normally done in spring before growth begins, but once the ground is no longer frozen, so the soil can be broken down to a tilth.

Cultivate some soil and incorporate peat and grit if the soil is heavy and likely to become waterlogged. This will lighten it and improve aeration. Excavate a hole large enough for the whole plant to be " d r o p p e d " into it, leaving only the tips of the stems visible. Dig the base of the hole well to allow efficient drainage, otherwise waterlogging will discourage successful rooting. Lift the plant with as complete a root ball as possible. Place it in the hole and arrange its branches in any of three different patterns within the hole; the choice will depend upon the habit of the plant under consideration. Whichever pattern of dropping is used, ensure that only 1 in or so of the stem tips are exposed: greater exposure of stem will cause the new growth to be leggy. Cover the plant with soil, firm in and label. Water during the growing season if the soil dries. Lift the whole plant in autumn. The branches will have rooted, usually fairly close to the soil surface. Cut away each division and plant it out or pot it up. Label clearly. Discard the old stool.

WAYS TO BURY A PLANT Compress the branches into a single row towards the middle of the plant if the branching is sparse. This pattern saves space and makes weeding easy. It should not be done if the plant produces a thick mass of stems as rooting will not be satisfactory if there is insufficient room for the roots to develop.

In those plants with brittle branches, work the soil down among them so that each stem is surrounded. This pattern is more difficult to keep weed free. The traditional pattern is to excavate a bowl-shaped hole and to push out all the branches to the perimeter, and fill in the middle of the hole with soil. This pattern is easy to weed but is wasteful of space.

Growing plants from stem cuttings is by far the most popular method of vegetative propagation. However, only in the last 150 years, since the availability of cheap materials and the development of greenhouses, cold frames, etc., has it played a significant part in vegetative propagation. The main difficulty about taking stem cuttings is that a stem, separated from its parent plant, has to survive while it initiates and develops roots and establishes itself as a new plant. This distinguishes the technique from layering (see page 54), in which the stem is not separated from the parent plant until after a new root system is produced. Because a stem cutting has no support system from the parent plant, it is necessary for the gardener to supply this himself. He should ensure that the propagating environment will not only enhance root development but also maintain the cutting until it is self-supporting. Selecting a suitable stem The ability of a stem to produce roots will be dependent on the age of the parent plant and its particular variety, and on the stem to be propagated (see page 53). The gardener should try to propagate from a plant that has recently matured and is a relatively new variety rather than an old plant or old variety of plant. The parent plant should be pruned rigorously to encourage it to produce fast-growing vegetative shoots from which stem cuttings will be made, as these shoots are most likely to produce roots. The harder the plant is pruned, the faster will be the new growth. The whole success of propagation by stem cuttings depends on the ability of the stem to produce rootsand if this is absent or at a very low level, then the stem should be discarded. A stem's ability to produce roots may have seasonal fluctuations, but this depends on the condition of the stem, that is whether it is soft w o o d , hard w o o d , etc. A softwood cutting is taken soon after the buds have started growing in spring, and it has a greater ability to produce roots than a hardwood cutting, which is taken at the end of the growing season. However, because the soft-

w o o d stem is still immature, it is more susceptible to water loss, rot and disease, and it therefore requires a highly controlled environment in which to develop. A stem cutting's food reserve is used not only to initiate roots but also to maintain the cutting until it is fully established as a new plant. The size of the reserve depends on the condition of the stem: a cutting from a mature (hardwood) stem will be able to survive much longer than an immature (softwood) cutting. A cutting should therefore be encouraged to develop roots as quickly as possible to avoid exhausting its food reserve. It should also be exposed as little as possible to variable weather conditions to prevent it drying outleafy cuttings being particularly prone to water loss. A cutting should be taken from a fastgrowing stem from the current year's growth at the correct season for the condition of the stem (for example, green w o o d in early summer, hard wood during the dormant season). It should then produce roots quite readily, without the artificial aid of rooting hormones; if it is dipped in hormone, the treatment is likely to have little or no effect. However for plants that are difficult to root, dip stem cuttings into a rooting hormone, or wound them, to stimulate the roots. Environmental control The rate at which a stem cutting develops its roots is dependent on the temperature around it. The processes controlling root initiation are essentially chemical; the higher the temperature the faster the chemical reaction and thus root production. However, if a whole cutting is kept warm, its tip will grow and food will be diverted from the important function of forming roots. Its food reserves may then be used up before the cutting has become self-supporting. Therefore, a cutting requires t w o temperatures: a cool, aerial environment to keep tip growth to a minimum, and warmth below to encourage root production. The exact temperatures vary with the condition of the stem and how susceptible it is to water loss. Softwood cuttings require bottom heat of about 21C/70F and as cool an aerial temperature as practicala mist

unit is ideal Hardwood cuttings, on the other hand, are propagated outdoors where the soil is quite warm enough and the air, even when frosty, is not too cool. Greenwood, semiripe and evergreen cuttings need a warm, humid environment. This can be supplied by placing a small pot filled with water inside a pot that has the cuttings and compost in it and putting them under a polyethylene tent, or by placing the pot that has the cuttings and compost in it inside a larger pot filled with moist peat and putting them under a polyethylene tent. However, the main disadvantage of these t w o environments is that it is easy for the gardener to overwater and so kill the cuttings through rotting and fungal diseases unless extreme care is taken. Cold frames, closed cases and polyethylene tunnels are therefore preferable. Different stem conditions A stem cutting can be divided into five w o o d conditions for the purposes of propagation. Softwood cuttings have leaves and are made from the first flush of growth in spring. Their stems are normally very soft because

they have grown extremely rapidly; and they require sophisticated environmental controls to minimize water loss and so ensure their survival until they become established. Greenwood cuttings are made from the tips of the leafy stems during early to midsummer. Their stems are soft, although harder than softwood cuttings, and they should be propagated in a controlled environment, such as a closed case. Semiripe cuttings are made in late summer from stem growth that has slowed and hardened but is still actively growing. Although these leafy stems are subject to water loss, they can survive under less rigorous environmental controls than softer w o o d cuttings. Ripewood cuttings are stems taken from evergreen plants during winter. They have almost hardwood stems but, because they are leafy, they are not entirely dormant and will require some degree of environmental control. Hardwood cuttings are made from leafless dormant stems of deciduous plants. They require minimal environmental control for survival.

WHERE TO CUT A STEM A nodal cutting has its basal cut just (-1/8in) below a bud, or node. It is the traditional place to cut soft, immature stems as a stem just below a node is harder and more resistant to fungal rots than a stem cut further away from the nodes. This latter cut is known as an internodal cut, and it is used mainly for more mature, woodier stems. Other methods of taking a cutting are leaf bud, heel or mallet cuttings (see pages 62-3) or vine eye cuttings (see page 73). The index at the back of the book will refer to these methods when appropriate.

Leaf bud cuttings Leaf bud cuttings can be taken from any type of stemsoft w o o d , green w o o d , semiripe wood, hard w o o d or evergreen. Each cutting consists of a leaf, a bud in its leaf axil and a very short piece of stem. The leaf supplies food to support the cutting and the regenerative processes; the bud provides the basis for the new stem system; and the piece of stem is where the first roots are produced. To be successful, the gardener must use stems that have a high capacity to produce roots. Therefore, prune the parent plant rigorously should it be a woody plant. This will encourage new stems, which will grow rapidly and so have a high rooting potential. For leaf bud cuttings, select one of these new stems with an undamaged leaf that is fully expanded and mature, if the leaf is immature, the cutting will complete leaf growth before it starts producing roots, and this increases the chances of peripheral problems, such as rotting. Also, ensure that there is a viable bud in the leaf axil. (For example, some Virginia creepers do not have a bud in every leaf axil.)

Make the cuttings with a razor blade, knife or shears, depending on the hardness of the stem. Cut close above the bud so that as small a snag as possible is left. This minimizes the likelihood of rotting and die-back, which might endanger the bud. Make the basal cut about 1-11/2 in below the top cut so that sufficient stem is available to anchor the cutting firmly in the cuttings compost. This is especially important with plants that have big leaves and are liable to rot. Plants with big leaves are also difficult to plant at a realistic spacing, so reduce their leaf area either by removing some of the leaf or by rolling the leaf and placing a rubber band round it so that it takes up less room. Dip the cutting in a rooting hormone. In a pot filled w i t h cuttings compost make a hole with a dibble. Plant the cutting with its bud about level with the compost surface. Firm sufficiently to prevent rocking. Label and water in with a fungicide. Place hardy cuttings in a cold frame and less hardy cuttings in a well-lit, more protected environment, such as a mist unit or closed case.

Heel cuttings The taking of heel cuttings is a traditional way to propagate plants from stem cuttings. It is a widely used method of removing a stem cutting from a plant, and it is quite possible to make heel cuttings of softwood, greenwood, semiripe, hardwood or evergreen stems. A young side-shoot is stripped away from its parent stem so that a heel, that is a thin sliver of bark and w o o d from the old stem, also comes away at the base of the cutting. The reason for taking a stem cutting with a heel is to give the cutting a firm base so that it is well protected against possible rots. It also exposes the swollen base of the current season's growth, which has a very high capacity to produce roots. Heel cuttings are often used for stem cuttings that take some time to develop

roots, for example those that are planted in autumn and have to survive through the winter before rooting, or those hardwood cuttings that are planted in a cold frame. Heel cuttings are also made from softwood and greenwood stems that are left to develop in partially controlled environments, such as a propagator. Heel cuttings can be taken at any time of year. Hold the bottom of the side-shoot between the t h u m b and forefinger and pull down sharply so it comes away with a long tail. If the side-shoot does not pull off readily, , place a knife blade in the angle close against the parent stem and cut away the side-shoot with a heel. Trim the tail on the heel and any leaves near it. Remove some of the tip on semiripe and hardwood cuttings. Dip the cutting in a rooting hormone.

Plant hardwood cuttings straight into the ground; semiripe and subshrub cuttings in a cold frame; and less hardy cuttings in the protected environment of a propagator. Label and water them in with a fungicide. Mallet cuttings Mallet cuttings have a hardwood plug at the base of each cutting to guard against rotting organisms. Their use is restricted to semiripe and hardwood cuttings, and they are especially successful for many Berberis when propagated in the autumn and planted in cold frames. Mallet cuttings are most successfully made from stems with a feathered habit, that is from a stem with small side-shoots. Prune back the parent plant in winter to encourage vigorous stem growth, which has a high capacity to produce roots.

Take mallet cuttings from these new stems in the later part of the growing season. Cut horizontally with scissor-type shears across the parent stem immediately above a suitable side-shoot. It is important to make this top cut as close to the side-shoot as possible because the longer the snag the greater the likelihood of die-back and hence potential rotting. Make a further horizontal cut about 3/4 in below the top cut so that the side-shoot is isolated with a small "mallet" of parent stem. Split this piece of mallet with a knife if it is thick. Trim any leaves at the bottom. Dip the base of the mallet stem in a rooting hormone. Make a hole large enough to take all the mallet and part of the side-shoot with a dibble. Plant semiripe cuttings in a cold frame and hardwood cuttings in the open ground. Label and water with a fungicide.

Soft wood is the most immature part of a stem, and, when propagating, it is the most difficult kind of cutting to keep alive. However, soft w o o d does have the highest capacity of all kinds of stems to produce roots: the younger and the more immature the cutting, the greater will be its ability to develop roots, and so propagate successfully. Soft stem growth is produced continuously at the tip of any stem during the growing season. As it matures, the stem gradually hardens and becomes woody. The faster the growth at the tip, the more stem without w o o d will be present. Softwood cuttings, then, are taken in spring from the fast-growing tips of plants. Growth when the buds first break is remarkably rapid, and, if cuttings are made as soon

as there is sufficient growth, the highest rooting potential will be available. Tips of plants taken slightly later in the season, around the beginning of June, will be slower growing, more mature and have a lower capacity to root, and they are referred to as greenwood cuttings. It is possible to obtain softwood cuttings later in the season by forcing the plant, that is by increasing temperatures well above the norm, which will accelerate growth. This can be done, for example, by placing deciduous outdoor plants in the warmth of a greenhouse, or by placing houseplants in a temperature of about 29C/85F. The very highest capacity to produce roots can be achieved by pruning the parent plant vigorously in winter, which will encourage rapid

g r o w t h ; by increasing the temperature around the plant in spring; and by then taking the cutting as soon as sufficient tip growth is available. Softwood cuttings are extremely susceptible to water loss. Their immature leaves have not fully expanded and so have not c o m pletely developed their own mechanisms for reducing water loss. Even a relatively minor water loss will hinder the roots developing. By the time a cutting is wilting all root development will have ceased. The secret of success is to collect the cuttings in small batches and to maintain them in a fully turgid condition before planting t h e m . Fill a container with cuttings compost and firm to within f in of the rim.

Take a cutting in early morning when the stem is fully turgid. By midafternoon normal water loss from the plant will exceed uptake, and the plant will be under water stress. If the stem has grown less than 4 in since bud-break, remove it with a heel, that is with the swollen portion at the base of the stem that had the very fastest growth when the new stem started to develop at bud-break. Place the cutting in a polyethylene bag or a bucket of water immediately. Keep the polyethylene bag shaded to avoid "cooking" the cuttinga major cause of failure. Plant the cutting as soon as possible. If it cannot be dealt with quickly, keep it cool in the vegetable compartment of a domestic refrigerator, where the low temperature will prevent excessive water loss.

If there is more than 4 in between the tip and the base of the cutting, place the cutting on a sheet of glass and make a nodal c u t that is a cut at the base of the stem just (1/8 in) below a bud or leaf joint. This provides as hard and solid a surface as possible and will help prevent rotting. If the cutting was taken with a heel, neaten the tail that will also have come away with the stem. Remove the leaves on the b o t t o m third of the cutting, which will be reliant on the remaining leaves to produce sufficient food to keep it alive until its roots are fully established. Dip the base of the cutting in a powder fungicide such as Captan to protect it against rotting. Softwood cuttings do not need to be treated with a rooting hormone.

but the "softwood" strength (0.2 percent IBA) can be mixed in with the powder fungicide if desired. Make a hole with a dibble and plant the cutting up to its leaves in the compost, taking care .not to damage the base of the cutting. Plant cuttings so their leaves do not touch. Label and firm them in by watering from above the compost, using a watering can with a fine rose; pressing by hand may damage the cuttings. Place the cuttings as quickly as possible in a well-lit propagating environment such as a mist unit, a closed case or a polyethylene tent that will conserve moisture within the cuttings. The advantage of a mist unit is that it keeps the top of the cuttings cool, whereas air

temperatures .are high in a closed case or polyethylene tent. A high aerial temperature will force the cuttings to grow upward, and food will be diverted from the important function of root initiation. If the cuttings are shaded to reduce the aerial temperature, then the light intensity penetrating to the leaves of the cuttings is decreased, and this reduces food production and hence the rate of regeneration. The problem then becomes a vicious circle that is not easy to resolve without a mist unit, which maintains both a cool, aerial environment and high water status within the cuttings. Softwood cuttings, because they are the immature part of a plant, are susceptible to all the vagaries of their environment: so the

longer they take to root, the greater are the chances of them succumbing to some outside influence. Thus the speed with which they regenerate is vital. The rate of root production will be dependent on the temperature surrounding the base of the cuttings; in general, the higher the temperature, the faster the roots are produced. Best rooting will occur with a temperature around the base of the cuttings of 21-24C/70-75F. Spray softwood cuttings with a liquid fungicide at least once a week to protect them against rotting and disease. Harden off the cuttings once they have rooted successfully, gradually weaning them from their controlled environment; finally pot them up in John Innes No. 1 compost or similar (see page 12) and label.

The essential but subtle distinction between softwood cuttings and greenwood cuttings is their speed of growth. Externally they may appear to be very similar, but greenwood cuttings are taken from the soft tip of the stem after the spring flush of growth has slowed down. The stem is, then, slightly harder and woodier than for softwood cuttings because the tip is not growing away from the hardening stem so fast as it was in the spring. In fact, as the season progresses greenwood cuttings become harder and harder. However, it should be emphasized that greenwood cuttings require just as much environmental control as softwood cuttings. Use greenwood cuttings to propagate a wide range of trees and shrubs, such as gooseberries, that will root easily, and the majority of herbaceous plants, such as chrysanthemums. However, plants that are difficult to root should be propagated from softwood cuttings and not from greenwood cuttings, which have a slightly reduced ability to develop roots. Prune back w o o d y plants rigorously in winter to encourage rapidly grown stems with a high capacity to root, which can be used for propagation in the growing season.

Take cuttings from these stems once their growth rate has begun to decline, which will usually be about the beginning of June for most outdoor plants. Fill a container with cuttings compost and firm to within 3/8 in of the rim. Take a cutting from a fully turgid stem with all its current season's growth, early in the morning. Place the cutting immediately in a bucket of water or a polyethylene bag in a shaded position, because it is vitally important to maintain the turgidity of a greenwood cutting. If it suffers water loss, its rooting will be hindered. Place the cutting on a pane of glass and with a knife reduce the cutting to about 3-4 in. The cutting's length will very much depend on the amount of soft growth available. Discard the leaves from the bottom half of the cutting. Dip the base of the cutting in a rooting hormone powder of "softwood" strength (0.2 percent IBA). Make a hole in the compost and plant the cutting up to the leaves. Label it and water with a fungicide. Place in a closed case, mist unit or polyethylene tent, to prevent excessive water loss and wilting. Ensure the cutting receives adequate light to make the food

needed for root production, as the cutting has little or no food reserves. Rooting should take between three and eight weeks. Take the rooted cutting out of

the propagating environment but keep it well protected, gradually hardening it off. Then repot in John Innes No. 1 compost or similar (see page 12), and label clearly.

During the late summer, annual stem growth slows down and plant stems become harder. Cuttings taken at this time are called semiripe cuttings. As they are thicker and, harder than softwood cuttings, they are more capable of survival. However they are still susceptible to the same problems of water loss because the cuttings carry leaves. Semiripe cuttings have relatively high levels of stored food and can therefore survive and produce roots in poor light. Many deciduous plants, such as deutzias, that root fairly easily are propagated from semiripe cuttings, and some evergreen plants can also be increased in this way. Prune the parent plant at the start of the dormant season, so that strong, fast-grown stems are available for propagation the following season. These will have a greater ability to produce roots than unpruned stems. Prepare the soil in the cold frame by digging deeply. Add peat and grit to improve drainage and its water-holding capacity. Cover the surface with a 1 in layer of fine (builder's) sand to make a better rooting medium. If only a few cuttings are to be taken, fill a container with cuttings compost and cover with a 1 in layer of fine sand. Take semiripe cuttings from a main stem with all the current season's growth or from side-shoots if the main stem has feathered

growth, that is a series of small side-shoots growing on the main stem. Remove the tip of the stem if it is soft, but leave it if the apical bud has set and growth has ceased for the year. Shorten the cutting with shears to 4-6 in long, depending on the vigor of the particular plant. Cut off the lower leaves flush with the stem so that about 2 in of stem is clear at the base. Treat the basal cut surface with a rooting hormone powder. The strength for semiripe cuttings is 0.4 percent IBA. Make a hole with a dibble in the soil in a cold frame. Plant the cutting about l1/2 in deep, so its base just enters the soil below the sand layer. Space the cuttings as close as is feasible, but this is not likely to be much less than 3-4 in apart. Label them clearly. Water in the cuttings using a dilute fungicidal solution; this also firms the sand around the cutting. Close the frame tightly and shade it to prevent the leaves from scorching. Air the cold frame from the lower end if the temperature rises above 27C/80F. Water sufficiently to rewet and develop high humidity should conditions become dry. As semiripe cuttings are usually deciduous, they will drop their leaves in autumn. At this stage remove all the fallen leaves from the frame so that they do not rot and cause disease.

Insulate the frame with matting once the leaves have fallen to protect the cuttings against frost in winter. Once the cuttings have no leaves, light is not necessary for the plants to manufacture food and so the matting can be left in place all the time. Rooting may start fairly quickly if the weather is mild; otherwise it will occur during the late winter or spring.

Leave the rooted cuttings in situ during the following growing season. Feed them regularly with a liquid fertilizer and water when dry. Remove insulation and air the cold frame by raising its lid during the day as soon as the danger of frost is over. Eventually remove it altogether. Lift the new plants and transplant them after leaf fall in the autumn. Label the new plants clearly.

The propagation of evergreen trees and shrubs from stem cuttings is a traditional and valuable method. Evergreen cuttings are taken from stems of very ripe w o o d , that is, almost hard w o o d . They cannot be regarded as hardwood cuttings as they are not leafless and are not fully dormant because of their evergreen habit. Because they have leaves, they need sufficient environmental control to prevent excessive water loss. In winter, prune the parent plant from which the cuttings are to be made. This will encourage the development of strong, vigorous, fast-grown shoots that have the required high capacity to produce roots. Propagate evergreen cuttings during late summer to early a u t u m n ; rooting will normally take place during winter. However, evergreen plants can be propagated from softer w o o d earlier in the growing season. Treat these cuttings according to the condition (soft w o o d , green w o o d or semiripe wood) of their stems. Prepare the soil in a cold frame by digging thoroughly and mixing in grit, peat and sand. Evergreen cuttings taken in late summer should be 4 - 6 in long, although their length must be related to the normal size of the plant and the amount of annual growth. Cuttings from dwarf Hebe, for example, may be only 11/2 in long. Take a heel with the cutting (see page 63) if it is to be propagated in unsterilized soil in a cold frame or polyethylene tunnel. Neaten any tail on the heel. Leave on the cutting any terminal bud that may have set. If, however, growth is continuing, cut out the soft tip with a knife. Strip any leaves off the bottom third to half of the cutting. Make a shallow vertical w o u n d about 1 in long in the bottom of the stem of plants, such as Daphne, Elaeagnus and Magnolia grandiflora, that are difficult to root. Dip the base of the cutting in a rooting hormone powder of ripewood strength (0.8 percent IBA). Ensure the wound is covered with the powder. To make more economical use of space, reduce the size of large leaves by cutting off up to half of each leaf blade with a sharp pair of scissor-type shears. Make a hole with a dibble in the prepared soil in the cold frame and plant the cutting

up to its leaves. Allow the leaves of cuttings to touch but not to overlap. If leaves overlap excessively they tend to stick together with a water film, and this provides an ideal place for rot to develop. Label the cuttings and water them with a dilute solution of fungicide. Close the lid of the cold frame as tightly as possible. Shade the frame by painting it with a proprietary lime-wash or by covering it with mesh, in order to reduce temperature fluctuation during the day and so prevent scorching. Remove the shading once light intensity and day length decreases during the autumn. If watering is necessary, incorporate a fungicide to help control rots. Inspect the frame regularly and remove any fallen leaves and dead cuttings. Cover the frame with matting as insulation as long as there is any danger from frost. Leave the cuttings in situ for the whole growing season. Transplant in autumn, taking considerable care when lifting the cuttings as many evergreen plants produce fairly thick, fleshy and brittle roots. Label the new plants clearly.

EVERGREEN CUTTINGS IN A MIST UNIT Prune the parent plant in winter. In late summer, fill a container with cuttings c o m post. Then take a cutting about 4 - 6 in long from the current season's growth. Pinch out any soft growing tip. At the bottom, make a nodal cut. Strip any leaves off the bottom third of the cutting and make a shallow vertical w o u n d on plants that are difficult to root. Dip the cutting in a rooting hormone. Cut down the size of large leaves. Make a hole with a dibble in the compost and insert the cutting. Plant any more cuttings, allowing the leaves just to touch. Label and water with a fungicide. Place in a mist unit or closed case. Ensure the cuttings do not become too wet as over the winter poor light and low temperatures do not dry out composts quickly. Harden them off gradually once the cuttings have rooted. Pot on very carefully in spring and label.

One of the easiest techniques of vegetative propagation is to propagate plants from hardwood cuttings. A hardwood cutting is made during the dormant season from the fully mature stem of a deciduous tree or shrub. Because the cutting has no leaves, the degree of environmental control required for successful propagation is minimal. As with virtually all methods of vegetative propagation, it is the preparation of the parent plant, by pruning rigorously,a year before the cutting is to be taken, that is possibly the single most important factor in the ultimate success of rooting a hardwood cutting. Hard, rigorous pruning will encourage stems with a high capability of producing roots. Where and when to take a cutting A stem grows at different speeds throughout the season. It develops fastest in spring, its

rate slowly declining until autumn, when growth ceases altogether. Even by the end of the growing season, the base of a stem that was produced in spring still has the greatest ability to develop roots, and it should be used for most hardwood cuttings. Plants, such as willows, poplars and currants, that root easily show very little decline in their ability to produce roots anywhere along the stem and so virtually any part of the stem can be made into cuttings. W i t h plants, such as colored-leaf plums, that are difficult to root include the swollen base in the cutting, which should be cut flush with the stem (see page 9). Hardwood cuttings can be taken any time during the dormant season, but they will be most successful at "leaf fall" and just before the leaf buds break; their lowest capacity to root is in the early new year. Cuttings made just before the dormant buds break will need a protected environ-

ment, such as a cold frame, or very careful timing to avoid leaves being produced before roots, so causing the cutting to lose water too quickly and die. Thus it is more satisfactory to take cuttings at "leaf fall," when they can be planted in the open ground. Conventional "leaf fall" occurs when the stem, having produced a corky abscission layer to isolate each leaf, has its leaves removed by rain, frost or wind. However, as far as the plant is concerned, a leaf is isolated as soon as the corky abscission layer is c o m plete, and this in effect is "leaf fall." Run a hand down the stem of a plant. If the leaves fall off, the corky abscission layer is complete, and the time, therefore, is right to take hardwood cuttings. Size of a hardwood cutting Although traditionally hardwood cuttings are made between 10-14 in long, a shorter length is much more successful.

Hardwood cuttings, although leafless, will still lose some water by evaporation from their surface. The commonest reason why these cuttings may fail to develop roots is because they are allowed to dry out. To avoid water loss, expose as little of the cutting as possible above the ground. However, if the cutting is planted too deep, the buds will not grow properly. Thus it is vital to expose sufficient of the cutting above ground for about three buds to develop. In practice the third bud can be planted just below ground level as at that depth its growth will not be inhibited. Therefore, for most plants, only 1 in or so of the cutting need be above ground. A cutting initially develops roots both along the stem and from the cut area at its base. Gradually, the roots along the stem disappear and the root system of the new plant develops from the basal roots alone. Therefore these basal roots should be encouraged by applying a rooting hormone to the cutting and by

maintaining good aeration around it. The surface layers of the soil, that is about the top 2 in, have most air in them. Thus ideally a cutting should be planted within these layers. However, a cutting planted 2 in deep with about 1 in exposed above ground will be too short for survival: the cutting will dry out too easily; it will be too short to anchor rigidly; and it will be t o o small to contain sufficient food reserves to support it through the dormant season. Thus the length must be increased to take account of these factors, and 6 in is a satisfactory compromise for a hardwood cutting. Propagating a hardwood cutting Prune the parent plant rigorously during the dormant season to encourage fast-growing stems. At "leaf fall" cut a hardwood stem with all the current year's growth, using a pair of shears. Cut it flush with the parent stem

to avoid snags. Make a sloping cut as close as possible above the proposed top bud, remembering that the bottom part of the cutting has the greatest rooting capacity. Make a horizontal cut exactly 6 in below the top cut ignoring the position of any buds. Treat only the cut base of the cutting, and not the stem, with a rooting hormone powder. The hardwood strength is 0.8 percent IBA. If suitable stems are made into cuttings at the correct season then the rooting hormone will have little affect except with plants that are difficult to root. Bundle the cuttings made at "leaf fall" into quantities of ten or twelve and heel them into a sandbox, almost to their full d e p t h ; label, and leave for the rest of the winter. Alternatively, they can be planted directly into well-cultivated soil. Easily rooted plants will readily survive in the open ground, whereas less easily rooted plants will benefit from the increased t e m -

perature and less fluctuating environment of a cold frame. Just before the dormant buds break in spring, dig the propagation bed thoroughly. Make a furrow 5 in deep with a spade. Lift the cuttings from the sandbox and plant them vertically in the furrow. Allow 4 - 6 in between cuttings; leave 12-15 in between rows in the open ground and only 4 in between rows in a cold frame. Firm back the soil, leaving about 1 in of the cuttings exposed. Label each row. Open-ground cuttings may need refirming if lifted by frost. Leave the cuttings in situ for the growing season. In autumn, lift the rooted cuttings, each of which will have produced several stems, and transplant them to their final situations in the garden. Protect cuttings planted in a cold frame only until they have developed some roots and then harden off. It becomes increasingly difficult to harden them off as the growing season progresses.

Disbudding A plant is sometimes needed that has a single stem, or "leg," at the bottom and many stems, or branches, farther up the plant. To grow a plant with this characteristic, a hardwood cutting needs to be longer than the normal 6 in and have more than 1 in exposed above the ground. However; a longer cutting may encourage further buds to develop lower down the stem, so losing the desired single stem. To prevent any branching down the stem, cut out all but the top three buds at "leaf fall." Cut out the buds shallowly but c o m pletely with a sharp knife; ensure no latent buds or part-buds remain. It is simpler to disbud in this way than to cut out stems at a later date. Gooseberry and red currant bushes are normally propagated from 10-14 in hardwood cuttings that have been disbudded. The bush will then have a single stem at the b o t t o m , which will allow free air circulation around the bush, thus reducing the possibility of mildew attacks.

To produce rose rootstocks take an Sin hardwood cutting and remove all but the top t w o buds from plants such as Rosa laxa and Rosa multiflora 'Simplex.' This method will avoid rootstock suckers. Seal the areas that have been disbudded to prevent rotting and disease. It is possible to leave them to callus over naturally, but unless this is done under fairly humid conditions there is always the danger that the cuttings may desiccate. It is better, therefore, to paint the disbudded areas with paraffin wax or more satisfactorily with a proprietary pruning paint such as Arbrex. Treat the cuttings with rooting hormone. Plant the rootstock and label it. For roses, leave the t w o top buds exposed and sufficient stem above the soil level for any buds to be grafted on later in the season. Gooseberry and red-currant cuttings should be planted with their third top bud within 2 in of the soil surface. At the end of the growing season lift the cuttings and replant with much more of the stem exposed.

Soft- or hollow-pith stems For many woody plants, such as forsythia, it is not possible to propagate hardwood cuttings by the method described on pages 70-1 because they have a soft or hollow pith. If this is exposed, it very often provides a site for rots and diseases, which will then kill the cuttings. There are t w o ways of overcoming this problem: either make the hardwood cutting exactly 6 in long and then seal the base of the cutting with paraffin wax, or make the basal cut below a leaf bud joint. Cuttings treated by either of these methods should root just as prolifically as cuttings with a solid pith. Melt some paraffin wax until it is liquid. Touch the base of a 6 in cutting in the wax so. that a drop of wax attaches, cools and sets quickly, so sealing the cut. Do not overheat the wax and so damage the plant.

This is a very satisfactory method of sealing these cuttings, but take care not to damage the wax seal when the cuttings are bundled, heeled in and planted. The alternative method is to make' the basal cut at a node, that is immediately below a leaf joint, where the pith is generally solid. Make the basal cut at the node nearest to the normal 6 in cutting length. Plants such as kerria very often have long spaces between nodes, and cuttings may then become as much as 8 - 9 in long. It is often recommended that plants with a soft pith should be cut with a knife, as this tends to cause less damage than shears, which may crush the cutting. Provided, however, that a sharp pair of scissor-type shears is used, it is rare for extensive damage to occur and shears are, therefore, quite satisfactory.

Vine eyes This technique is normally used only for vines, although it is quite possible to adopt it for any plant with a reasonably solid pith that can be propagated by hardwood cuttings. Vine eye cuttings are the hardwood equivalent of leaf bud cuttings. Prune back the plant during the dormant season to encourage vigorous growth. Fill a small pot with cuttings compost and firm to within 3/8 in of the rim, using a presser board. At "leaf fall" cut a stem with all the current season's growth from the parent plant. Make a sloping cut with a pair of shears just above a leaf bud joint, so that no snag is left that could die back and possibly kill the bud. Make the basal cut horizontally across the stem about 11/2 in below the top cut. W o u n d the cutting if the plant is difficult to root.

Place a sharp knife half-way down the stem on the opposite side to the bud. Make a shallow cut down to the base. Dip the basal cut surface and the w o u n d into hormone powder of a suitable strength for hardwood cuttings (0.8 percent IBA). Make a hole in the prepared compost with a dibble. Plant the cutting vertically so that the bud lies about level with the compost surface. Insert only one cutting per pot. Label the pot and stand it on a greenhouse bench or in a closed casethe higher the temperature, the faster will be the rate of regeneration. Water the cutting to prevent it drying out. Do not overwater during the winter when the cutting is dormant, as the compost will readily waterlog, causing the cutting to rot and die. Harden off the cutting once it has rooted, and transplant in spring. Label it.

Conifers are predominantly evergreen trees and shrubs, some of which can be propagated from softwood, greenwood, semiripe and ripewood cuttings. In general, spruces, firs and pines do not respond to propagation from cuttings, and they should be propagated from seed or, if special varieties are required, by grafting. Whether conifer cuttings are to be propagated in a warm environment, such as a closed case, or in a colder one, such as a cold frame, does not affect the season that they are taken. Take cypress cuttings in autumn or winter, and yew and juniper cuttings in the new year after the parent plants have been subjected to a period of frost. Select cuttings from young, actively growing plants such as hedges that are clipped regularly, and so produce strong, vigorous shoots.

Preferably take cuttings from the top rather than the bottom of the plant, as cuttings from low down often develop into plants of atypical habit in that they may continue to grow horizontally. Conifers vary considerably in their pattern of growth. There are leader shoots, which are the growing points of the branches; lateral or subterminal shoots, which also increase in size; and feather shoots, which do not grow larger. For propagation by cuttings it is important to choose shoots with a distinct growing point, and this is why feather shoots are unsatisfactory. If a growing point is not present, bun-shaped forms will be produced, particularly with yellow foliage forms. Conifer propagation in a warm environment Conifer cuttings to be propagated in the warm environment of a closed case or mist unit

should have a softer base than those to be propagated in a cold frame; they should also become established more quickly. Fill a container with cuttings compost and firm to within f in of the rim. The tip of a conifer shoot is green; it gradually turns yellow farther down the stem, and then brown. Remove a vigorously growing leader or lateral shoot from the parent stem. Make a clean cut about 1/4 in into the brown-barked w o o d so that the cutting is predominantly green but has a small protective "plug" of hard w o o d at its base. Trim the leaves off the bottom 1-11/2 in of the cutting. Do not remove the growing point. After trimming, dip the cutting in a rooting hormone powder of ripewood (0.8 percent IBA) strength. Make a 1 in hole with a dibble in the compost and insert the cutting and firm. Leave

about 11/2-2 in between cuttings. Label the container; then water with a fine rose. Place in a closed case or mist unit. The cuttings will root within three to four months. Harden off and pot on in spring. Conifers propagated in a cold frame It is easier, but slower, to propagate conifer cuttings in a cold frame. Prepare the soil in the propagation bed before taking the cuttings. Raise the level of the soil in the cold frame to within 6-8 in of the lid. This will maintain an equable humidity and temperature for the cuttings. Pull a stem backward down the parent stem to obtain a cutting with a heel, w h i c h can then be propagated in a cold frame. Trim the heel of the cutting with a sharp knife. Remove the leaves on the b o t t o m third of the cutting either with a knife or by hand provided only a small scar is caused which may actually encourage the cutting to root. Do not remove the growing point.

Dip the base of the cutting in a rooting hormone powder of ripewood strength (0.8 percent IBA). Make a 1 in hole with a dibble in the cold frame soil and plant a cutting. Firm the soil back round the stem. Space any other cuttings 2 in apart and label them. Water with a dilute fungicidal solution and close down the lid of the cold frame. Ensure the environment is always kept absolutely clean and hygienic as the cuttings have to survive for nearly a year in the cold frame. Place matting on the lid to insulate the cuttings during any cold weather. Remove it as soon as the danger of frosts has passed. Leave the cuttings undisturbed until summer, when the frame should be aired and shaded to prevent scorching. This can be done either by painting its lid with a proprietary brand of lime-wash or by covering it w i t h mesh. Water the cuttings as necessary to prevent them drying out. Lift the cuttings in autumn. Pot on or transplant to their final position in the garden.

Some woody, low-growing plants, such as Salvia, that are often treated as herbaceous plants are called subshrubs. Most of t h e m root readily and can easily be propagated from stem cuttings taken in late summer. Prune the parent plant during the dormant season to encourage strong, vigorous shoots to develop. Prepare the soil in a cold frame by digging deeply. Add grit if necessary to ensure it is free draining. Cut off some shoots with all their current season's growth in late summer (usually early

September). Select nonflowering shoots if possible, although with many plants, such as lavender, these may be difficult to find. If flowering shoots have to be used then cut back the flower and its stem to the leafy part. Cut out any soft growing tip with a sharp knife or pinch it out between the t h u m b and forefinger. Make the basal cut with shears about 4 in below the top of the cutting. A quick and easy way to measure 4 in is to hold the stem in the palm of an adult's hand. The stem will be approximately 4 in long where it reaches the butt of the hand.

Strip the leaves from the b o t t o m half of the cutting, either by pulling very carefully or by cutting with a sharp knife. Dip the base of the cutting into a rooting hormone powder, preferably of a semiripewood strength (0.4-0.5 percent IBA). W i t h a dibble make a hole in the prepared soil about half the length of the cutting, that is about 2 in deep. Firm the soil around the cutting. Leave about 4 in between each cutting and about 4 in between each row. Label the cuttings clearly. Using a watering can with a coarse rose, apply a dilute fungi-

cidal solution of Captan or Benlate over the cuttings to protect them against disease. Seal the cold frame and shade it to avoid scorching. Check the cuttings regularly; water when necessary to prevent them drying out. Remove the shading on the cold frame and reduce watering as soon as light intensity decreases. Insulate the cuttings against frost by laying some matting over the cold frame. Remove this during the day, if possible. Harden off the rooted cuttings gradually in spring. Then lift and transplant to their final position in the garden. Label them clearly.

The genus rhododendron is an extremely large and varied group of plants that have differing abilities to root from cuttings. The large-flowering hardy hybrids and the smallleafed dwarf rhododendrons are the most worth while to propagate from stem cuttings. Large-flowered hardy hybrids Prepare the compost before taking any cuttings to avoid unnecessary delay, and water loss, before planting. Mix together equal parts lime-free grit and sifted peat. Fill a container w i t h the compost and firm to within 3/8 in of the rim. Take cuttings from the second flush of growth at the end of the summer, usually in September. The second flush of growth can be recognized by the umbrella of shoots that does not occur on the first flush of growth. Remove all the leaves except the terminal whorl (the group of leaves nearest the tip). Snap out the terminal bud regardless of whether it is a flower or vegetative bud. Place the cutting in the palm of a hand so that the top is just about level with the forefinger and the stem is across the palm of the

hand. Cut the stem at the butt of the hand with a sharp pair of shears. This will give a cutting of about 4 in long. Cut part of the remaining leaves to reduce their leaf area and so make planting easier. W o u n d the b o t t o m 3/8 in of the cutting by making a shallow score with a sharp knife. Dip the cut surfaces in a strong rooting hormone (0.8 percent IBA). This is particularly important for varieties with 'Britannia' in their pedigree, as they are generally difficult to root. Make a hole with a dibble in the prepared compost and insert the cutting. Plant any further cuttings as close together as possible. Label the container and place it in a well-lit environment with bottom heat of 21C/70F. Control water loss by covering the container with a very thin, clear polyethylene sheet or by leaving the container in a mist unit. Prevent rots by applying a dilute fungicidal solution at regular weekly intervals. Rooting should not be expected until well into the new year. Harden off the rooted cuttings and transplant in late winter/early spring and label. Place them in a cold frame to grow on.

DWARF RHODODENDRONS These are the easiest group from which to take cuttings, although some varieties, depending on their parentage, are more difficult than others to root successfully. Mix thoroughly equal parts lime-free grit and sifted peat. Fill a container of suitable size with compostallow about 11/2 sq. in per cuttingand firm gently. Select a stem of the current year's growth that has set its terminal bud, which is usually in late August to September. Cut back the stem with a sharp pair of shears to about 11/2 in from the tip. Pick or cut off any leaves on the bottom half of the cutting. W o u n d the cutting by making a very shallow slice on the bottom 1/2 in of the cutting. This wounding is not always necessary, but many varieties do benefit, and it is advisable to adopt a standard procedure. Treat the cut surfaces with rooting hormone powder, using the hardwood strength of 0.8 percent IBA.

Make a 1/2 in hole with a dibble in the prepared compost. Plant the cutting and water with a fungicide. Label; then place in a well-lit humid environment with bottom heat; a mist unit is ideal to produce these conditions. Once the cutting has rooted, harden off gradually in spring. Pot up and label.

An extremely prolific and relatively easy way to propagate heathers is from cuttings. t h e season to do this is summer, although the exact timing depends upon the availability of nonflowering shoots from which to make the cuttings. Do not take cuttings from shoots with flower buds that have set because rooting may well be slow and poor, especially for winter-flowering heathers. However summerflowering heathers can be propagated from shoots that have already flowered, should nonflowering shoots be scarce. Prune a plant during the dormant season to encourage strong, vigorous shoots. Make up some cuttings compost of equal volumes lime-free grit and sifted sphagnum moss peat. It is imperative that the peat is sifted and all lumps removed, otherwise later on the rooted cuttings will be difficult to separate without damage. Choose a container appropriate to the number of cuttings to be taken, allowing 3/4 in between cuttings. A separate container should be used for each variety as varieties will root at different rates.

Fill the container with the compost and firm with a presser board to within f in of the container rim. Cut off a 1-11/2 in vegetative shoot with a pair of sharp scissors. Remove the leaves on the lower part of the cutting. The cutting is then ready to be planted as there is no need to apply a rooting hormone. Make a hole with a thin dibble to half the depth of the cutting, which is then inserted. Plant any remaining cuttings 3/4 in apart. Label; then water with a dilute fungicidal solution, using a fine rose. Do not firm by hand. Place the container of cuttings in a protected environment. Quickest rooting will occur if there is bottom heat and high humidity, for example in a mist unit. A wellsealed cold frame, shaded in the summer and insulated with matting in the winter, will suit just as well, although rooting of late-season cuttings may not occur until the spring. Harden off the rooted cuttings and pot on in spring. Take special care when knocking out the cuttings and teasing them apart, so that minimal damage is done to the roots. Label the new plants clearly.

Some plantsmostly houseplants that belong to Begonlaceae, Crassulaceae and Gesneriaceaehave the capacity to develop plantlets on their leaves. This is a simple and efficient means of propagation, and it can occur in either of t w o ways: by naturally

growing foliar embryos, or by artificially induced plantlets from leaf cuttings. Foliar embryos are the result of a highly specialized process that occurs in certain plants, such as the strawberry geranium and piggyback plant. In this process the plant isolates simple plant cells in small areas of its leaves during the course of its g r o w t h ; these cells are subsequently capable of developing into new plants. The range of plants that can be propagated from leaf cuttings is relatively small, and the success of this technique is subject to various environmental factors that are to some extent open to manipulation by the gardener. Leaf cuttings should be made only from leaves that have recently expanded fully. If the leaf is still less than full size and immature, all its energy will first go toward developing and maturing. This will delay the generation of new plant life and, since a leaf cut off from its parent is unsupported, the longer the propagation process takes the more likely it is that problems, such as rotting, will arise. W h e n a leaf has recently expanded to its maximum leaf area it is efficient in food production and still has a full life expectancy in case regeneration should be slow. At this time the leaf is still young enough to have a high capacity to propagatea capacity that will lessen as the leaf ages. The selected leaf should be complete, normal and undamaged so that it will not be

subject to rots and will produce typical offspring. It should also be free from pests and diseases. Since most plants suitable for propagation by leaf cuttings are grown indoors or under glass, it is possible to take cuttings all year round, as long as there is a fresh, fully expanded leaf available. All that will alter is the speed at which the plantlets develop; in winter, temperatures and light intensity will be lower and, as a consequence, food production and the rate of propagation will be slower. The leaf, when separated from its parent plant, will be highly susceptible to desiccation and it is necessary to minimize this by controlling the environment. Therefore always propagate leaf cuttings in a closed case, propagator, or under a glass sheet or polyethylene tent. The most c o m m o n cause of failure in leaf propagation is the leaf rotting before it has a chance to produce a self-supporting plant. Thus it is important that all materials, containers, composts and leaves should be clean and undamaged. Although many plants have leaves that are capable of rooting, they do not all have the capacity to propagate from leaf cuttings. Those that do not can only be successfully

propagated from leaf bud cuttings (see page 62). Other specialized kinds of leaf cuttings are bulb scaling (see page 48), and scooping and scoring bulbs (see page 49).

The simplest and most reliable way to produce new plants from leaf cuttings is to use a complete leaf with its stalk. The disadvantage of this method is that it develops only a few new plants from each leaf. Rotting and disease are the main causes of failure so always use clean tools, containers and composts. Leaf petiole cuttings can be taken at any time of year provided a new, fully expanded leaf is available. Make up a cuttings compost of equal parts sifted peat and grit. Fill a container that is large enough to take the leaf petiole cuttings. Firm the compost to within 3/4 in of the rim of the container. Slice a suitable leaf cleanly through the leaf stalk, using a sharp knife or a single-edged razor blade to ensure the least possible damage. Leave about 2 in of the leaf stalk attached to the leaf blade. Make a small hole with a dibble in the compost to a depth just sufficient to hold the cutting. Plant at a shallow angle so that the leaf blade is almost flat on the compost. The shallower the base of the stalk is planted into

the compost the more the air can circulate around it, which will encourage a quick response. Then firm the compost around the stalk. W h e n the cuttings are all planted, label them and water in a dilute fungicide such as Captan or Benlate, using a fine rose. Place the cuttings in an environment that maintains a steady high humidity, so that the cuttings do not dry out. The temperature, especially for houseplants, needs to be relatively high, and this is best provided by using a propagator that is heated at the bottomideally at about 20C/68F. Expose the cuttings to sufficient light for them to manufacture food and develop the new plantlets. Too much sunlight may scorch the cuttings. In general, light shade is the best compromise. The new plantlets will develop on the cut surface of the leaf stalk within five to six weeks, and several may appear at this point. Leave them until they can be handled and separated into individual plants, potted on and hardened off. If it is likely to be some time before they are large enough to be potted on, then liquid feed the plantlets.

A leaf midrib is the extension of a leaf stalk, and it is possible to propagate from leaf midrib cuttings in the same way as it is from leaf stalk (petiole) cuttings. Leaf midrib cuttings can be used for any leaves that have a single central vein, and it is a particularly successful technique with Streptocarpus. Before taking cuttings, ensure all tools and equipment are scrupulously clean. Disease can be a major problem if care is not taken when propagating. Leaf midrib cuttings can be taken at any time of the year provided the plant has a suitable leaf, that is one that is undamaged and has recently expanded fully. Fill a plastic container with cuttings c o m post. Water thoroughly and allow to drain.

Cut a suitable undamaged leaf cleanly from the parent plant and place it upside down on a clean sheet of glass. Cut off a strip that is not more than 2 in wide, using a singleedged razor blade at right angles to the midrib. Cut further strips in the same way, each strip having a central rib and two wings. Make a shallow trench in the compost and insert the bottom of a cutting just deep enough to hold it erect. Firm gently. Plant the remaining cuttings about 1 in apart. Spray the completed container with a fungicide such as Captan or Benlate to protect the cuttings against fungal rots. Label the container and place it in a warm (21C/70F), humid environment to encourage the cuttings to root. However, ensure there is sufficient light for the leaves to manufacture

food. Avoid direct sunlight, which may scorch the cuttings. A propagator or a closed case with bottom heat is ideal, although a polyethylene tent supported with a cane or loop of wire is quite adequate protection.

Stand the container in a water bath to rewet compost that is beginning to dry out. Young plantlets should appear in five to eight weeks, but they will not be big enough for transplanting for several more weeks.

LEAF CUTTINGS ON LATERAL VEINS Lay a leaf upside down on a clean sheet of glass. Remove the midrib with a razor blade so that the t w o halves of the leafblade are isolated and all the lateral veins have an exposed cut surface. Make a shallow trench in a container filled with moist cuttings compost. Plant

the leaf cuttings vertically in the trench with the cut surfaces of the lateral veins just in the compost. Firm gently; label and place in a propagator or closed case. Plantlets will develop on the cut surfaces of the lateral veins within five to eight weeks. Separate, pot on and label when they are large enough to handle.

Plants that do not have a leaf with a central midrib and lateral veins but possess a more netted veining are not easy to propagate from leaf cuttings. Certain plants, however, have leaf veins that are capable of generating a new plant, and these can be propagated by cutting through the veins of the leaf so that plantlet development is induced but the leaf itself remains entire. Because of the size of their leaves this technique is particularly suitable for varieties of Begonia rex. Clean all tools and equipment thoroughly. Fill a seed tray w i t h cuttings compost; then press it down to about 3/8 in below the rim. Water the seed tray thoroughly and allow to drain. Remove a fully expanded leaf that is undamaged from the parent plant. Place the leaf upside down on a clean sheet of glass. Cut off the leaf stalk flush with the leaf blade, using a single-edged razor blade. Make a f i n cut across a major vein, using the razor blade.

Repeat this until there is one cut every square inch all over the leaf. Place the cut (or slashed) leaf, with its top side upward, flat on the surface of the cuttings compost in a seed tray. Pin the leaf down with a thin wire staple if it does not lay flat on the compost. Label the leaf cuttings clearly. Spray the seed tray with a fungicide to reduce the likelihood of rots, and cover with a sheet of glass. Place in the light, which is essential for food production and so for plantlet development. Avoid direct sunlight, which may scorch the leaf. A closed case with bottom heat provides the best environment for a slashed leaf to propagate. The rate at which plantlets develop will be dependent on the surrounding temperature: at 21C/70F, plantlets should appear in three to four weeks. Separate the new plants once they can be handled easily and pot on. Label and harden off gradually.

Any leaf that will regenerate vegetatively can be propagated from leaf squares, but this method is normally used only for plants with big leaves and especially for Begonia rex varieties. Its main advantage is that it produces numerous plantlets from a single leaf. This m e t h o d of propagation produces small pieces of cut leaf that are prone to rotting. Therefore clean, sterile tools and equipment should be used at all times and scrupulous, hygienic measures should be observed. Fill a clean plastic seed tray w i t h cuttings compost and press the compost to give a flat surface about f in below the rim. Water the compost thoroughly and allow to drain. Remove a fully expanded, undamaged leaf from the parent plant and place it face down on a clean sheet of glass. Take a single-edged razor blade and ruler and cut this leaf into a series of 3/4 in squares, placing the ruler gently on the leaf to avoid crushing. Any damaged squares must be discarded. Lay the cuttings flat on the compost with the top side facing upward. Place in rows

about 1/2 in apart. Label the seed tray clearly. Spray the cuttings with a fungicide such as Captan or Benlate. Cover the seed tray with a clean sheet of glass to maintain humidity. Place in a warm (18-21C/65-70F) environment out of direct sunlight, but make sure there is sufficient light available to allow the leaves to manufacture food. A closed case is ideal, although a window sill in a warm room facing east or west is also suitable. If the compost was thoroughly watered initially and the seed tray is covered, little or no more watering will be needed. Should the compost dry out, rewet by standing the seed tray in a water bath. Plantlets should appear on the cut surfaces of the larger leaf veins nearest to the leaf stalk. At a temperature of 21C/70"F, this should occur after about five or six weeks, but the new plants will not be big enough to pot on for several more weeks. W h e n the first leaves have opened, gradually harden off by airing the seed tray. Pot up when the plants are a sufficient size to handle without damage.

Monocotyledonous plants, such as snowdrops and mother-in-law's tongues, have a series of parallel veins running the length of each leaf. Some of these plants can be propagated at any time of year from leaf cuttings, providing they have an inherent capacity to produce a plantlet on the cut surface of a vein and suitable leaves are available. Cuttings from normal leaves such as Cape cowslips {Lachenalia), snowdrops (Calanthus) and snowflakes {Leucojum) tend to wilt quickly, so keep them turgid by planting as soon as possible. W i t h succulents, such as mother-in-law's tongues (Sansevieria), water loss is not so critical. Leaf cuttings from bulbous plants, such as Hyacinthus, that have tender leaves may well rot and die unless they are handled as little as possible, planted carefully and sprayed regularly with fungicide.

Ensure all tools and equipment are absolutely clean before taking leaf cuttings. Fill a container with cuttings compost, press down to within 3/8 in of the container rim, using a presser board. Water the compost thoroughly and allow to drain. Cut off a fully expanded, undamaged leaf from the parent plant. Lay it face down on a clean sheet of glass and cut with a singleedged razor blade at right angles to the veins. Make a series of slices 1-11/4 in wide. Make a shallow trench with a dibble and plant the cutting vertically with its basal cut held firmly in the compost. Place the other cuttings 1 in apart in rows. Label the container clearly. Spray the cuttings with a fungicide such as Captan or Benlate as protection against rot and disease. Place the container in a warm (21C/70F), humid environment so the leaves do not dry

out and wilt. Ensure the cuttings have adequate light to produce food, although direct sunlight should be avoided otherwise scorching may occur. A polyethylene tent will provide these conditions quite adequately, although a closed case in a greenhouse will be the most satisfactory provided that it is kept scrupulously clean. Rewet drying compost by standing the base of the container in a water bath. The time taken for young plantlets to appear will vary with the different plants. Mother-in-law's tongues will usually regenerate in six to eight weeks during the summer. Cape cowslips, snowdrops and hyacinths that have been propagated in spring just as their leaves mature will regenerate in four to six weeks. Repot the new plants once they are large enough to handle and label them clearly; then harden them off.

Leaf cuttings of Heloniopsis will regenerate from both ends. Reduce the leaf to 11/2-2 in by cutting off the top and bottom. Plant the cutting in a loop, with both ends in the compost.

A few plants are capable of developing isolated groups of simple cells in certain areas of their leaves. As a result these cells, or foliar embryos, are capable of developing into new plantlets. Given certain growing conditions some of these plants, such as Mitella, have foliar embryos that develop naturally into plantlets. Other plants such as Cardamlne will only respond in this way if the leaves are separated from the parent plant. The position on the leaf of these embryos is fixed according to each plant's characteristic and it is not influenced by the way the actual plantlets develop. The plantlets in Kalanchoe leaves, for example, arise between the jagged edges of the leaves; in Mitella and Cardamine, the plantlets appear at the junction of the leaf stalk and leaf blade. Sedum, however, produces only one plantlet and this is at the base of each sessile leaf. Collect the plantlets from those plants that produce t h e m naturally. W i t h some of these plants,, such as Kalanchoe, the plantlets fall off once the roots begin to develop. Plant them in cuttings compost in a labeled seed tray. Repot t h e m separately once they have established properly.

Although other plants such as Asplenium and Cystoperis develop foliar embryos naturally, it is best to remove the leaf together with the plantlets to allow them slightly longer to become established before separating them from the parent leaf. Place the leaf flat on some cuttings compost in a seed tray. Pin it in position with a light wire staple if it does not sit flat on the compost. Label and leave on a shaded greenhouse bench. Ensure that the parent leaf does not become desiccated. Separate the plantlets and pot on once they have rooted and established. This should take seven to eight weeks. Some plants, such as Tiarella, will only be stimulated into developing plantlets from foliar embryos if their leaves are severed. Cut off a leaf as soon as it has expanded fully. Set it on some cuttings compost in a seed tray. Label; then place in a warm (21C/70F), humid, shady environment such as a polyethylene tent until the plantlets develop and establish (five to seven weeks); then separate and pot on. Succulents, such as Sedum and Kalanchoe, can be left on an open bench in a greenhouse to develop their plantlets. Certain Kalanchoe respond best if the leaves are stimulated in spring to produce plantlets.

Grafting is a technique of joining t w o parts of different plants together in such a way that they will unite and continue their growth as one plant. One part, called the scion, is usually a stem from the plant to be propagated. This is grafted onto a root system from another plant, which is called the rootstock (also, the stock or understock). All the various techniques of joining plants are called grafting, although, when buds only are joined to the rootstock, it is sometimes called budding.

There are t w o basic grafting positions: apical grafting, in which the top of the rootstock is removed and is replaced with the scion; and side grafting, in which the scion is grafted on to the side of the rootstock and the rootstock above the graft is not removed until after a union is achieved. Because time-consuming preparation work is necessary before two plants can be joined, grafting is superficially a less attractive technique than other relatively easy methods of vegetative propagation, such as taking stem

cuttings or layering. However, some plants such as witch hazel are not easily propagated by any other vegetative method if selected forms are required, and so they are grafted onto rootstocks. Perhaps the most useful reason for grafting is to transfer the benefits of a particular rootstock on to another plant. Various fruittree rootstocks, for example, have been developed to control both the size and fruiting vigor of other varieties of fruit tree. Other advantages that a rootstock might possess are resistance to pests and diseases; toleration of high soil-moisture levels and salt concentrations; and toleration of high alkalinity levels in the soil. The more rootstock incorporated into a new plant, the more influence the rootstock will have. Another advantage of grafting is that more than one scion can be joined onto a plant. This is particularly useful with fruit trees as a suitable pollinator variety can be grafted into a tree or bush already grafted with another variety, or it may allow a decorative stem to be grafted on and then be top worked with another variety.

There are a number of problems associated with grafting. The main one is ensuring two plants are compatible. This limitation determines which variety and species of plants can be grafted onto which rootstocks; in general, it is normal to graft varieties onto their own species or very closely related ones. To graft successfully, it is vitally important to position the various tissues of the stem correctly so that the stem can make a quick and continuous union. The cambium is the actively growing part of the stem that lies just under the bark. This cambium layer on both the scion and the rootstpck must be positioned so they are absolutely adjacent to each other, or at least in as much contact as possible. The successful formation of a graft also depends on making and matching cuts quickly and cleanly: the cut surfaces must be placed in contact with the minimum of delay. Should the surfaces dry out, the tissues will die and so make an effective barrier to the development of a successful union. The making of a graft union is only partly due to successful carpentry. Much also

depends on providing suitable conditions for the tissues to develop and grow to form a successful union. In effect, this means that water loss must be prevented and warmth must be provided round the grafted parts by carefully covering them until they have joined together. Traditionally, the grafted parts have been covered and tied together with raffia, but most grafts are now enclosed by 1/2 in wide clear polyethylene strip. This has the advantage of completely surrounding and sealing the cut areas, so reducing water loss to a minimum. The graft union on indoor grafted plants is taped with rubberized strip before being placed in a humid atmosphere to develop. Once the grafted parts have successfully united, the development of the new plant depends on preventing any further c o m petition from the rootstock. Therefore, always remove all subsequent growths from anywhere on the rootstock. Although it is theoretically possible to graft at almost any time of the year, the best season for most grafting is in the spring.

Shield-budding, however, must normally wait until midsummer when the bark lifts easily from the w o o d on the rootstock. Whip-and-tongue grafting Whip-and-tongue grafting is commonly used to propagate fruit trees, although the technique can be employed successfully for trees and shrubs with tissues that will also readily unite at relatively low temperatures. Select a plant that will be suitable as rootstock and plant it outdoors. Label it and leave it to establish for one growing season. In midwinter, select a plant that is suitable as scion material. From it take some hardwood stems with all their previous season's growth. Bundle these scions together and heel them into 6 in of soil in a well-drained cool position. Firm back the soil and label them. W h e n the scions are eventually grafted in spring, they will be less developed than the growth on the rootstock. Prepare the rootstock once its sap has started to rise; this is usually just before the leaf buds break. Trim to make a single stem with no branches.

Fruit trees (-especially apples) are grafted at 9-10 in above soil level to avoid problems such as collar rot. Ornamental plants, on the other hand, are grafted as close to the ground as feasible, to avoid unsightly bulges that may occur with certain rootstock/scion combinations. Cut back the rootstock to the appropriate height with a pair of sharp shears. Then make a 11/2 in sloping cut across the top, using a sharp knife. Lift the scions from the ground. Select one that has a similar diameter at its base to that of the rootstock top. Take a sharp knife and make a top cut close above a bud about four to five buds from the scion base. Then make a sloping 11/2 in cut across the base of the scion, ending it just below a b u d ; ensure the cut is at the same angle as the rootstock cut. This is a splice or whip graft. To provide rigidity, add a tongue to the cuts. The tongue is made from single cuts on both the scion and rootstock. From onethird of the way down the sloping cut on top of the rootstock, make a shallow, single 1/2 in slice d o w n into the rootstock.

Make the scion tongue by cutting for 1/2 in from one-third of the way up the scion sloping cut, keeping the knife blade at the same angle as the tongue on the rootstock. Slip the scion into the rootstock so they interlock. If the rootstock is thicker than the scion, move it to one side until there is good contact between the t w o cambial layers. Bind with clear polyethylene grafting tape to hold the join firmly. Seal the top of the scion with tree paint and label. For a wide range of trees and shrubs, including apple and pear trees, the grafted parts can then be left to unite. Cherry trees, however, should have their scion and grafted area covered with a polyethylene bag, which is then tied just below the unionthe increased temperature hastening development. Remove the grafting tape and polyethylene bag as soon as the cut surfaces start callusing, which means the t w o grafted parts are beginning to join. Cut off any growth that the rootstock may produce and, if required, reduce the scion shoots to just one to promote a singlestemmed tree or shrub.

Wedge or cleft grafting is perhaps the easiest way to join t w o plants as only simple carpentry is required, and it is used to propagate a wide variety of shrubs and ornamental trees. In midwinter, collect some stems with all their previous season's growth from a plant with suitable scion material. Bundle these together and then heel them 6 in deep into the ground. This will prevent the scions drying out, and will keep t h e m cool and retard their development. Label t h e m clearly. In late winter/early spring, select a suitable rootstock: either a one-year-old seedling or a substantial piece of root that is growing vigorously. Lift the rootstock and wash it. Crafting is carried out on the top of the root or in the hypocotyl of the seedling. Cut the top of the rootstock horizontally, using a sharp knife. Then make a single 11/4 in cut vertically down the middle of the rootstock. Lift the scions; choose one that has plump, healthy buds and is of similar diameter to the top of the rootstock. Make a sloping cut just above a bud at the top, using a sharp knife. Then make a horizontal cut about 6 in below. To form a wedge, make a sloping 11/2 in cut, starting near a bud and cutting toward the

middle of the scion base. Make a similar cut on the opposite side of the scion. Push the scion gently but firmly down into the rootstock cut. Leave a small portion of the cut scion surface exposed above the rootstock. This will encourage the development of callus tissues, and it is known as the "church w i n d o w " effect. Bind the joined area tightly with clear polyethylene grafting tape. Seal the top ot the scion with a suitable tree paint to reduce water loss. Place the grafted parts in a box of peat and grit and heel them in to just above the graft union. Label and place in a protected environment such as a cold frame or closed case, or on a greenhouse bench. The higher the temperature the faster the union will occur, providing the grafted parts do not dry out. As the grafted parts unite, the exposed cut surfaces will start callusing. This can be seen in the "church w i n d o w " just above the cut surface of the rootstock, where the callus tissues interlock and provide rigidity. W h e n a fairly firm union has formed, cut and remove the polyethylene tape. Pot up the resulting tree or shrub, or plant it out.

depending on its vigor. Write a label in indelible ink and attach it to the new plant. Cut out any competing growths from the

rootstock, although these are unlikely to occur with a rootstock that was cut back into the hypocotyl or a root.

The side-wedge graft is the simplest and most effective method of side grafting, and it is widely used to propagate both deciduous and evergreen plants. The usual season for side-wedge grafting is in late winter/early spring, just before the leaf buds break. However, with evergreen plants it is feasible whenever a mature flush of growth is available and the rootstock is growing actively. For very sappy plants, that is those plants that "bleed" when cut, it is advisable to graft early in the growing season and dry the rootstocks off before doing so. Establish a one-year-old labeled seedling in a pot and grow it for a year. Ensure this seedling, which will form the rootstock, is related to and therefore compatible with the plant to be grafted onto it. About three weeks before grafting, place the potted rootstock in a frost-free area to encourage it to grow. Dry off the rootstock, especially deciduous rootstock, by keeping watering to a bare minimum or indeed by not watering at all. Trim the leaves off the b o t t o m 3-4 in of the rootstock stem. Select a plant that has suitable scion material, and remove some stems with all their previous season's growth. If at all

possible, collect these stems with their apical buds intact. Select a stem, or scion, of comparable thickness to the rootstock. Make t w o sloping 11/2 in cuts on the scion base, opposite each other, so that a wedge shape is produced. Starting about 2 in above soil level, cut downward into the rootstock for 1 1/2 in and inward to about a third of the stem thickness. Gently bend the rootstock away from this cut so that it opens sufficiently to insert the scion. If the scion is narrower than the rootstock, match up the cambial layers on one side. Release the tension on the rootstock. Bind with clear polyethylene tape, overlapping it to seal the entire cut area and label. Stand the grafted rootstock in a greenhouse, and the t w o parts should join in about six to eight weeks, depending on the species. This environment is preferable to a warm, humid one, such as a closed case, where the buds would be encouraged to develop and, once the t w o parts have joined, the grafted rootstock would need hardening off, which can be extremely difficult to do satisfactorily. Remove the polyethylene tape and cut back half the rootstock above the grafted area as soon as the two parts have joined.

Two weeks later, cut back the remaining rootstock above the grafted area so that the scion becomes the leader shoot of the plant. Dab the cut surface with a suitable tree paint if the final cut surface is extensive.

Watering is probably the most difficult aspect of graft management. Water little and often rather than in large doses at infrequent intervals, so that the plant is kept on the dry side in a humid environment.

Traditionally, side-veneer grafts have been used to propagate conifers, but they are now often carried out on any plant suitable for side grafting. The join resulting from this method of grafting is slightly more upright than one from a side-wedge graft (see page 89). Conifers, when cut, exude resin and, although this can be reduced by drying off the rootstocks before grafting, the resin will still adhere to a knife blade and so impair its efficiency and cutting edge. Therefore, keep the knife blade clean by wiping it regularly with some absorbent material soaked in an organic solvent such as acetone. It is important to wipe the solvent off the blade with a clean cloth otherwise it could pollute the tissues of any plant through which the knife blade subsequently cuts. Rootstocks for side-veneer grafts are almost invariably pot grown, as the fine, fibrous roots of the conifer are prone to drying out. Graft conifers either in late winter/early spring or during late summer, although the latter period causes problems as the trees have to be kept alive over the winter and then need to be hardened off in spring. In late winter/early spring, dry off the potgrown conifer that will form the rootstock by watering less than usual. Because it is evergreen, this drying off should not be as drastic as for deciduous plants.

After three weeks, once the rootstock shows signs of growth, grafting is carried out. Select a conifer that has suitable scion material and cut off a leader shoot of one season's growth. The length of the shoot, or scion, will very much depend on the vigor of growth, but it must include some mature brown-barked w o o d . Strip off the leaves from the bottom third of the scion. Make a 11/4 in sloping cut down to the scion base, using a sharp knife. Then turn the scion over and make a very small wedge cut. Trim any leaves off the bottom 6 in of the rootstock stem. About 21/2-3 in above soil level, make a 11/4in sloping cut downward and inward to give a shallow cut about 1/8 in deep at the bottom. Then make a slightly downward and inward nick lower down the rootstock to join the first cut. Remove the sliver of w o o d from the rootstock. Place the rootstock and scion together. If their sizes match they will be easier to manipulate. If the scion is narrower than the rootstock, set to one side to match up the cambial layers. The interlocking bases of the t w o grafted parts will provide some rigidity, but they should also be tied together firmly. It is possible to use a rubberized strip as a tie, but clear polyethylene tape is just as effective and has the added advantage of preventing water loss from around the cuts.

Label the grafted rootstock and keep it warm and humid to encourage the plant to grow and the grafted parts to join up. A closed case with or w i t h o u t heat from below is a suitable environment. Water the pot sparingly, keeping the plant on the dry side until callusing occurs. Conifers, if grown close together in pots under warm, humid conditions, are subject to various leaf diseases and rots, and to red

spider mite infestations, so spray regularly with fungicides and pesticides. Take the grafted rootstock out of the closed case and harden off on the greenhouse bench, once the parts have united. This should be within six to ten weeks. Remove the polyethylene tape and reduce the top of the rootstock by one-third immediately. After a fortnight, remove a further third. After midsummer, head back any remaining rootstock.

Shield-budding, or T-budding, is a traditional way to propagate rosaceous plants by grafting. A bud from the plant to be propagated is placed behind the bark of the rootstock so that the back of the bud and the exposed surface of the rootstock w o o d are in contact. However, this technique can only be carried out when the bark of the rootstock lifts easily; this is normally between May and August. Select a suitable rootstock, either a seedling or a one-year-old layer. Plant it in some open ground during the winter. Label it and allow to establish. As soon as the bark lifts easily from the wood underneath, prepare the rootstock for

shield-budding. Insert a rose bud into the hypocotyl of a seedling rose (see page 92) and a tree bud into a stem of a compatible rootstock at the required height. Cut off any leaves and branches on the b o t t o m 12 in of the rootstock. Make a Tshaped incision through the bark by cutting a horizontal slit and then a vertical downward incision sufficiently large to take a suitable bud. The taut bark will begin to spring away from the wood underneath. Loosen the two flaps slightly to receive the bud. Select a plant that has suitable budding material. Cut off a stem with all the current year's growth and with plump, healthy buds.

Remove the leaves, but leave about 1/2 in of each leaf stalk attached to the stem. W h e n shield-budding, always select buds from the middle of a stem where the buds are mature. Do not take them from the bottom of the stem because they may be latent, nor from the top where they will be immature. Cut shallowly into the stem, or bud stick, about 1/4 in below a mature b u d ; then cut shallowly underneath the b u d ; when past it, lift off the bud together with a tail of bark. Ensure the cut is deep enough to avoid damaging the " e y e " of the bud. Remove any w o o d from under the bark by bending the bark outward and flicking the

w o o d out. If the bud trace comes out with the w o o d , the bud is not mature and should be discarded. Using the leaf stalk as a handle, slip the bud into the T-cut on the rootstock, and trim off the tail flush with the horizontal cut. Tie the budded rootstock with clear polyethylene tape, leaving the bud and leaf stalk exposed, and label it. After three to four weeks the bud will have united with the rootstock and the tape can be removed. In late winter/early spring, cut back the top of the rootstock to just above the bud, which will then grow out during the following spring.

Hybrid Tea and Floribunda roses should be propagated by inserting buds into seedling rootstocks rather than by taking stem cuttings. The advantage of rose budding is that the seedling rootstocks boost the vigor of the weaker varieties, which on their o w n roots may grow only 9 in or so, while reducing the potential of the more vigorous ones, which might otherwise reach 14-16 ft tall. The selection of a suitable rootstock is one of the most important decisions when propagating roses. Although it is possible to collect a seedling of the wild rose from the hedgerow and use this as rootstock, this not only denudes the natural flora of the countryside but in fact is not really desirable as rootstock. A rose rootstock should not produce suckers once the bush is eventually planted in its permanent position. It should ideally be of a variety that grows few thorns, and the actual process of budding will be easier if the neck of the rootstock is relatively long. All these advantages are found in Rosa laxa. In winter, plant a seedling rootstock of 5-8 mm grade up to its neck in the ground. Space further plants about 9 in apart in a row, and earth t h e m all up to cover their necks; then label them. Budding is carried out once the bark of the rootstock lifts easily, usually after midsummer.

Pull away the earth from the rootstock neck. Make a T-shaped cut in the neck. Loosen the t w o flaps of bark a little. Select a plant that has suitable budding material. From it choose a stem in which the flowers have just " b l o w n , " that is, gone over, and remove this stem with all its current season's growth. At this stage virtually all the buds on the stem will be suitable for propagation. Remove the leaves from the stem. Hold a sharp knife just below a bud. Cut shallowly toward the tip of the stem around the bud. Lift off the bud together with its tail. Insert the bud, tail upward, between the flaps of bark on the rootstock. Trim the tail flush with the horizontal cut. Cover the bud with a rubber budding patch and pin it in position. This patch, which is made of nonvulcanized rubber, will perish at about the same rate as the bud unites with the rootstockin about four to five weeks. This means that the rubber patch does not need cutting as it will not constrict the rapidly expanding neck of the plant. The bud will develop before the end of the season or during the following season. In late winter, cut off the top of the rootstock, just above the bud. This prevents possible stem suckers. The following autumn, replant the bush in its final place.

Standard roses Standard roses are propagated on to rootstocks of Rosa rugosa, which has single stems usually 6 - 8 f t tall. Plant in winter in a row and support on wire attached to posts. Budding takes place during the following summer when the bark lifts. Two or sometimes three

buds in a close spiral are worked on the rootstock in order to produce a more even and regular head. The height at which the leaf buds are inserted will depend on the length of stem required. A standard rose is usually budded at about 31/2 ft; a half-standard at about 21/2 ft.

Chip-budding is perhaps the easiest way to bud a plant as it involves relatively few actions and, more importantly, it provides greater cambial contact between rootstock and scion than does shield-budding. A " c h i p " of bark and w o o d is removed from the rootstock and replaced with a " c h i p " of similar dimensions carrying a bud from the plant to be propagated. Chip-budding can be used to propagate any rosaceous plant, provided that the w o o d is sufficiently hard and mature. For the technique to be successful, it is necessary to prevent any water loss by sealing the cut edges extremely well. Chip-budding can be carried out at any time of year provided that well-matured buds are available and temperatures are high enough (at least 10C/50F) to produce a union quickly. Although this technique could be used on pot-grown rootstocks such as Magnolia grandiflora, it is usually carried out on rootstocks that have been planted in winter in the open ground. In midsummer, remove all branches and leaves from the b o t t o m 12-15 in of the rootstock stem.

Select a plant that is suitable for budding. Cut off some vegetative shoots with all their current year's growth and with well-matured buds, at least toward their base. Discard the softer t o p growth and carefully remove all the leaves flush with the stem. Make a 1/4in cut down into the rootstock stem, at an angle of about 45 degrees. Start a top cut 11/4" in above the lower cut and angle it down to join the basal cut; remove the chip. Select a stem, or bud stick, that has a similar diameter to the rootstock so that it is easy to match the cuts. Make exactly similar cuts on the bud stick as on the rootstock, ensuring that a bud is included midway down the chip. Tuck the bud chip into position on the rootstock and tie with polyethylene tape, overlapping the tape so that it seals the chip completely. Then label. After three to four weeks the bud will have united with the rootstock and the tape can be removed, so allowing the bud to swell. In winter, cut the rootstock right back, close above the bud but without damaging it. The bud will grow out the following season. If budding is done early, the bud may grow out before the end of the season.