Tank Power PDF

HSS
Being the best through innovation
TANK-POWER
TANK-POWER FRSER
- Very Good Toughness, Good for Exotic Materials like Stainless Steels,
Nikel Alloys, Titanium and General Application, Rough & Finish
- Sehr gute Zhigkeit. Fr rostfreie Sthle, Nickellegierungen, Titan und
allgemeinen Einsatz. Schruppen und schlichten
SELECTION GUIDE
SIZE
ITEM
MODEL
DESCRIPTION
PAGE
MIN MAX
E9936
GA936
E9A29
GAA29
E9942
GA942
E9A30
GAA30
E9938
GA938
E9A31
GAA31
E9940
GA940
E9A32
GAA32
E9941
GA941
E9A35
GAA35
E9A26
GAA26
E9A33
GAA33
E9A34
GAA34
PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH
D1.0
D25.0
876
D1.0
D25.0
877
D1.0
D25.0
878
D1.0
D25.0
879
D1.0
D25.0
880
D2.0
D25.0
881
R0.5
R12.5
882
R1.0
R12.5
883
D6.0
D25.0
884
D6.0
D25.0
885
PREMIUM HSS-PM, MULTI SCHNEIDEN 45RECHTSSPIRALE KURZ SCHRUPFRSER - FEIN D4.0
D25.0
886
D6.0
D25.0
887
D6.0
D25.0
888
PREMIUM HSS-PM, 2 SCHNEIDEN KURZ
PREMIUM HSS-PM, 2 FLUTE LONG LENGTH

PREMIUM HSS-PM, 2 SCHNEIDEN LANG
PREMIUM HSS-PM, 3 FLUTE STUB LENGTH

PREMIUM HSS-PM, 3 SCHNEIDEN EXTRA KURZ



PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH BALL NOSE

PREMIUM HSS-PM, 2 SCHNEIDEN KURZ STIRNRADIUS
PREMIUM HSS-PM, 2 FLUTE LONG LENGTH BALL NOSE

PREMIUM HSS-PM, 2 SCHNEIDEN LANG STIRNRADIUS
PREMIUM HSS-PM, MULTI FLUTE SHORT LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI SCHNEIDEN KURZ SCHRUPFRSER - FEIN
PREMIUM HSS-PM, MULTI FLUTE LONG LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI SCHNEIDEN LANG SCHRUPFRSER - FEIN
PREMIUM HSS-PM, MULTI FLUTE, 45HELIX SHORT LENGTH ROUGHING - FINE
PREMIUM HSS-PM, MULTI FLUTE SHORT LENGTH ROUGHING - COARSE

PREMIUM HSS-PM, MULTI SCHNEIDEN KURZ SCHRUPFRSER - GROB
PREMIUM HSS-PM, MULTI FLUTE LONG LENGTH ROUGHING - COARSE

PREMIUM HSS-PM, MULTI SCHNEIDEN LANG SCHRUPFRSER - GROB
RECOMMENDED CUTTING CONDITIONS

EMPFOHLENE SCHNEIDKONDITIONEN
874 phone:+82-32-526-0909,
fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr
889
TANK-POWER END MILLS
: Excellent, : Good
Carbon
Steels
Alloy
Steels
Prehardened
Steels
~HB225
HB225~325
HRc30~40
Hardened Steels
HRc40~45
HRc45~55
High Hardened
Steels
Copper
HRc55~70
Graphite Cast Iron Aluminum Stainless

Titanium
Steels
Inconel
phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr 875
CARBIDE
E9936 SERIES
GA936 SERIES
TANK-POWER
END MILLS
HSS
CBN
END MILLS

i-Xmill
END MILLS
2 Flute design for slotting.

Suitable for high speed cutting of difficult - to - cut materials.
YG-1s new developed TANK-POWER Coating suitable for high
speed cutting.
FLAT SHANK
SEITLICHE MITNAHMEFLCHEN
FLAT SHANK
2 Schneiden, Geeignet fr Nutenfrsen.

Geeignet fr Hochgeschwindigkeitsfrsen von schwer zu
zerspanenden Materialien.
Neuentwickelte Beschichtung fr Hochgeschwindigkeitsfrsen.
X5070
END MILLS
X-POWER
END MILLS
up to 3mm
over 3mm
JET-POWER
END MILLS
P.889
Unit : mm
V7 Mill INOX
END MILLS
UNCOATED
TANK-POWER COATED
Mill
Diameter
e8
E9936010
E9936020
E9936030
E9936040
E9936050
E9936060
E9936070
E9936080
E9936090
E9936100
E9936120
E9936140
E9936160
E9936180
E9936200
E9936220
E9936250
GA936010
GA936020
GA936030
GA936040
GA936050
GA936060
GA936070
GA936080
GA936090
GA936100
GA936120
GA936140
GA936160
GA936180
GA936200
GA936220
GA936250
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
Shank
Diameter
h6
Length
of Cut
Overall
Length
6
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
2.5
4
5
7
8
8
10
11
11
13
16
16
19
19
22
22
26
47
48
49
51
52
52
60
61
61
63
73
73
79
79
88
88
102
Tolerances according to DIN 7160 & 7161

Toleranzen nach DIN 7160 & 7161
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
Tolerance range in / Toleranzwerte in

Nominal-Diameter in / Nennmabereich in
from 1 to 3
von 1 bis 3
e8
h6
over 3 to 6
ber 3 bis 6
14
28
0
6
over 6 to 10
ber 6 bis 10
20
38
0
8
25
47
0
9
over 10 to 18 over 18 to 30
ber 10 bis 18 ber 18 bis 30
32
59
0
11
40
73
0
13
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
876 phone:+82-32-526-0909,
Copper
Graphite
Cast Iron Aluminum Stainless

Steels
Titanium
: Good
Inconel
CARBIDE
E9A29 SERIES
GAA29 SERIES
TANK-POWER
END MILLS
FLAT SHANK
FLAT SHANK
HSS

CBN
END MILLS
2 Flute design for slotting.

Suitable for high speed cutting of difficult - to - cut materials.
speed cutting.
i-Xmill
END MILLS
2 Schneiden, Geeignet fr Nutenfrsen.

X5070
END MILLS
up to 3mm
X-POWER
END MILLS
over 3mm
JET-POWER
END MILLS
P.889
Unit : mm
UNCOATED
TANK-POWER COATED
Mill
Diameter
e8
E9A29010
E9A29020
E9A29030
E9A29040
E9A29050
E9A29060
E9A29070
E9A29080
E9A29090
E9A29100
E9A29120
E9A29140
E9A29160
E9A29180
E9A29200
E9A29220
E9A29250
GAA29010
GAA29020
GAA29030
GAA29040
GAA29050
GAA29060
GAA29070
GAA29080
GAA29090
GAA29100
GAA29120
GAA29140
GAA29160
GAA29180
GAA29200
GAA29220
GAA29250
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
Shank
Diameter
h6
Length
of Cut
Overall
Length
6
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
3
7
8
11
13
13
16
19
19
22
26
26
32
32
38
38
45
47
51
52
55
57
57
66
69
69
72
83
83
92
92
104
104
121
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS

TANK-POWER
END MILLS

from 1 to 3
von 1 bis 3
e8
h6
over 3 to 6
ber 3 bis 6
14
28
0
6
over 6 to 10
ber 6 bis 10
20
38
0
8
25
47
0
9
32
59
0
11
GENERAL
HSS
END MILLS
40
73
0
13
MILLING
CUTTERS
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
Copper
Graphite

Steels
Titanium
: Good
Inconel
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
E9942 SERIES
GA942 SERIES
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, 3 FLUTE STUB LENGTH

PREMIUM HSS-PM, 3 SCHNEIDEN EXTRA KURZ
Well balanced web design to minimize deflection and chattering.
3 flute design possess the advantage of 2 flute and 4 flute
end mill.
speed cutting.
Verstrkter Kern zur Erhhung der Stabilitt.

3 Schneiden Design besitzt die Vorteile von 2-bzw 4 Schneiden
Frsern.
X5070
END MILLS
X-POWER
END MILLS
up to 1mm over 1mm
JET-POWER
END MILLS
P.890, 891
Unit : mm
V7 Mill INOX
END MILLS
UNCOATED
TANK-POWER COATED
Mill
Diameter
e8
E9942010
E9942020
E9942030
E9942040
E9942050
E9942060
E9942070
E9942080
E9942090
E9942100
E9942120
E9942140
E9942160
E9942180
E9942200
E9942220
E9942250
GA942010
GA942020
GA942030
GA942040
GA942050
GA942060
GA942070
GA942080
GA942090
GA942100
GA942120
GA942140
GA942160
GA942180
GA942200
GA942220
GA942250
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
Shank
Diameter
h6
Length
of Cut
Overall
Length
6
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
2.5
4
5
7
8
8
10
11
11
13
16
16
19
19
22
22
26
47
48
49
51
52
52
60
61
61
63
73
73
79
79
88
88
102

TANK-POWER
END MILLS
GENERAL
HSS
END MILLS

from 1 to 3
von 1 bis 3
e8
h6
over 3 to 6
ber 3 bis 6
14
28
0
6
over 6 to 10
ber 6 bis 10
20
38
0
8
25
47
0
9
32
59
0
11
40
73
0
13
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
878 phone:+82-32-526-0909,
Copper
Graphite

Steels
Titanium
: Good
Inconel
CARBIDE
E9A30 SERIES
GAA30 SERIES
TANK-POWER
END MILLS
FLAT SHANK
FLAT SHANK

Well balanced web design to minimize deflection and chattering.
3 flute design possess the advantage of 2 flute and 4 flute
end mill.
speed cutting.
HSS
CBN
END MILLS
Verstrkter Kern zur Erhhung der Stabilitt.

3 Schneiden Design besitzt die Vorteile von 2-bzw 4 Schneiden
Frsern.
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
up to 1mm over 1mm
JET-POWER
END MILLS
P.890, 891
Unit : mm
UNCOATED
TANK-POWER COATED
Mill
Diameter
e8
E9A30010
E9A30020
E9A30030
E9A30040
E9A30050
E9A30060
E9A30070
E9A30080
E9A30090
E9A30100
E9A30120
E9A30140
E9A30160
E9A30180
E9A30200
E9A30220
E9A30250
GAA30010
GAA30020
GAA30030
GAA30040
GAA30050
GAA30060
GAA30070
GAA30080
GAA30090
GAA30100
GAA30120
GAA30140
GAA30160
GAA30180
GAA30200
GAA30220
GAA30250
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
Shank
Diameter
h6
Length
of Cut
Overall
Length
6
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
3
7
8
11
13
13
16
19
19
22
26
26
32
32
38
38
45
47
51
52
55
57
57
66
69
69
72
83
83
92
92
104
104
121
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS

TANK-POWER
END MILLS

from 1 to 3
von 1 bis 3
e8
h6
over 3 to 6
ber 3 bis 6
14
28
0
6
over 6 to 10
ber 6 bis 10
20
38
0
8
25
47
0
9
32
59
0
11
GENERAL
HSS
END MILLS
40
73
0
13
MILLING
CUTTERS
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
Copper
Graphite

Steels
Titanium
: Good
Inconel
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
E9938 SERIES
GA938 SERIES
FLAT SHANK
FLAT SHANK

Recommended for pocketing, cam milling, die sinking and
slotting..
Designed for high speed cutting of difficult - to - cut materials.
speed cutting.
Empfohlen fr Taschenfrsen, Nockenfrsen, Gussformen und

Nutenfrsen.
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
P.892
Unit : mm
V7 Mill INOX
END MILLS
EDP No.
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
UNCOATED
TANK-POWER COATED
E9938010
E9938020
E9938030
E9938040
E9938050
E9938060
E9938070
E9938080
E9938090
E9938100
E9938120
E9938140
E9938160
E9938180
E9938200
E9938220
E9938250
GA938010
GA938020
GA938030
GA938040
GA938050
GA938060
GA938070
GA938080
GA938090
GA938100
GA938120
GA938140
GA938160
GA938180
GA938200
GA938220
GA938250
Mill Dia.
Tolerance(mm)
Shank Dia.
Tolerance
0~+0.03
h6
Mill
Diameter
Shank
Diameter
Length
of Cut
Overall
Length
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
6
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
3
7
8
11
13
13
16
19
19
22
26
26
32
32
38
38
45
49
51
52
55
57
57
66
69
69
72
83
83
92
92
104
104
121
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
880 phone:+82-32-526-0909,
Copper
Graphite

Steels
Titanium
: Good
Inconel
CARBIDE
E9A31 SERIES
GAA31 SERIES
TANK-POWER
END MILLS
FLAT SHANK
FLAT SHANK

Recommended for pocketing, cam milling, die sinking and
slotting.
Designed for high speed cutting of difficult - to - cut materials.
speed cutting.
HSS
CBN
END MILLS
Empfohlen fr Taschenfrsen, Nockenfrsen, Gussformen und

Nutenfrsen.
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
P.892
Unit : mm
EDP No.
UNCOATED
TANK-POWER COATED
E9A31020
E9A31030
E9A31040
E9A31050
E9A31060
E9A31070
E9A31080
E9A31090
E9A31100
E9A31120
E9A31140
E9A31160
E9A31180
E9A31200
E9A31220
E9A31250
GAA31020
GAA31030
GAA31040
GAA31050
GAA31060
GAA31070
GAA31080
GAA31090
GAA31100
GAA31120
GAA31140
GAA31160
GAA31180
GAA31200
GAA31220
GAA31250
Mill Dia.
Tolerance(mm)
Shank Dia.
Tolerance
0~+0.03
h6
Mill
Diameter
Shank
Diameter
Length
of Cut
Overall
Length
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
10
12
19
24
24
30
38
38
45
53
53
63
63
75
75
90
54
56
63
68
68
80
88
88
95
110
110
123
123
141
141
166
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
Copper
Graphite

Steels
Titanium
: Good
Inconel
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
E9940 SERIES
GA940 SERIES
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH BALL NOSE

PREMIUM HSS-PM, 2 SCHNEIDEN STIRNRADIUS KURZ
Excellent performance on wide materials from carbon steels
and stainless steels to aluminum.
Designed for milling of radius bottom slots, fillets and special
contours.
speed cutting.
Fr die Bearbeitung von: Werkstoffen bis 45 HRC, rostfreien

Sthlen, Titan und Nickellegierungen.
Entworfen zum Frsen von Nuten mit Radien, Rippen und
speziellen Konturen.
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
P.893
Unit : mm
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
UNCOATED
TANK-POWER COATED
Radius of
Ball Nose
R (0.02)
E9940010
E9940020
E9940030
E9940040
E9940050
E9940060
E9940070
E9940080
E9940090
E9940100
E9940120
E9940140
E9940160
E9940180
E9940200
E9940220
E9940250
GA940010
GA940020
GA940030
GA940040
GA940050
GA940060
GA940070
GA940080
GA940090
GA940100
GA940120
GA940140
GA940160
GA940180
GA940200
GA940220
GA940250
R0.5
R1.0
R1.5
R2.0
R2.5
R3.0
R3.5
R4.0
R4.5
R5.0
R6.0
R7.0
R8.0
R9.0
R10.0
R11.0
R12.5
Mill Dia.
Tolerance(mm)
Shank Dia.
Tolerance
0~-0.03
h6
EDP No.
Mill
Diameter
Shank
Diameter
Length
of Cut
Overall
Length
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
6
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
2.5
4
5
7
8
8
10
11
11
13
16
16
19
19
22
22
26
47
48
49
51
52
52
60
61
61
63
73
73
79
79
88
88
102
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
882 phone:+82-32-526-0909,
Copper
Graphite

Steels
Titanium
: Good
Inconel
CARBIDE
E9A32 SERIES
GAA32 SERIES
TANK-POWER
END MILLS
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, 2 FLUTE LONG LENGTH BALL NOSE

PREMIUM HSS-PM, 2 SCHNEIDEN STIRNRADIUS LANG
Excellent performance on wide materials from carbon steels
and stainless steels to aluminum.
Designed for milling of radius bottom slots, fillets and special
contours.
speed cutting.
HSS
CBN
END MILLS
Fr die Bearbeitung von: Werkstoffen bis 45 HRC, rostfreien

Sthlen, Titan und Nickellegierungen.
Entworfen zum Frsen von Nuten mit Radien, Rippen und
speziellen Konturen.
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
P.893
Unit : mm
UNCOATED
TANK-POWER COATED
Radius of
Ball Nose
R (0.02)
E9A32020
E9A32030
E9A32040
E9A32050
E9A32060
E9A32070
E9A32080
E9A32090
E9A32100
E9A32120
E9A32140
E9A32160
E9A32180
E9A32200
E9A32220
E9A32250
GAA32020
GAA32030
GAA32040
GAA32050
GAA32060
GAA32070
GAA32080
GAA32090
GAA32100
GAA32120
GAA32140
GAA32160
GAA32180
GAA32200
GAA32220
GAA32250
R1.0
R1.5
R2.0
R2.5
R3.0
R3.5
R4.0
R4.5
R5.0
R6.0
R7.0
R8.0
R9.0
R10.0
R11.0
R12.5
Mill Dia.
Tolerance(mm)
Shank Dia.
Tolerance
0~-0.03
h6
EDP No.
Mill
Diameter
Shank
Diameter
Length
of Cut
Overall
Length
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
6
6
6
6
6
10
10
10
10
12
12
16
16
20
20
25
7
8
11
13
13
16
19
19
22
26
26
32
32
38
38
45
54
56
63
68
68
80
88
88
95
110
110
123
123
141
141
166
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
Copper
Graphite

Steels
Titanium
: Good
Inconel
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
E9941 SERIES
GA941 SERIES
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, MULTI FLUTE SHORT LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI SCHNEIDEN KURZ SCHRUPPFRSER - FEIN
Suitable for high-feed roughing milling.
Designed to machine carbon steels, alloyed steels,
stainless steels.
Providing excellent finished surfaces in many cases.
speed cutting.
up to 20 : center cut, over 20 : non center cut
Geeignet zum HSC - Schrupp - Frsen.

Geeignet zum Frsen von Stahl, legiertem Stahl und rostfreier
Stahl.
Liefert in vielen Fllen exzellent bearbeitete Oberflchen.
Bis D=20mm : Mit Zentrumschneide, ber D=20mm : Ohne
Zentrumschneide.
X5070
END MILLS
X-POWER
END MILLS
up to 9
10 ~ 20
over 20
JET-POWER
END MILLS
~20
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
UNCOATED
TANK-POWER COATED
Mill
Diameter
js12
E9941060
E9941070
E9941080
E9941090
E9941100
E9941120
E9941140
E9941160
E9941180
E9941200
E9941220
E9941250
GA941060
GA941070
GA941080
GA941090
GA941100
GA941120
GA941140
GA941160
GA941180
GA941200
GA941220
GA941250
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
Shank
Diameter
h6
Length
of Cut
Overall
Length
No. of
Flute
6
10
10
10
10
12
12
16
16
20
20
25
13
16
19
19
22
26
26
32
32
38
38
45
57
66
69
69
72
83
83
92
92
104
104
121
3
3
3
3
4
4
4
4
4
4
5
5

GENERAL
CARBIDE
END MILLS
from 1 to 3
von 1 bis 3
over 3 to 6
ber 3 bis 6
over 6 to 10
ber 6 bis 10
50
0
6
60
0
8
75
0
9
js12
TANK-POWER
END MILLS
P.894
Unit : mm
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
22~
h6
over 10 to 18 over 18 to 30 over 30 to 50

ber 10 bis 18 ber 18 bis 30 ber 30 bis 50
90
0
11
105
0
13
125
0
16
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
884 phone:+82-32-526-0909,
Copper
Graphite

Steels
Titanium
: Good
Inconel
CARBIDE
E9A35 SERIES
GAA35 SERIES
TANK-POWER
END MILLS
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, MULTI FLUTE LONG LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI SCHNEIDEN LANG SCHRUPFRSER - FEIN
stainless steels..
Providing excellent finished surfaces in many cases.
speed cutting.

Stahl.
Liefert in vielen Fllen exzellent bearbeitete Oberflchen.
Bis D=20mm : Mit Zentrumschneide, ber D=20mm : Ohne
Zentrumschneide.
HSS
CBN
END MILLS
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
up to 9
10 ~ 20
over 20
JET-POWER
END MILLS
~20
22~
P.894
Unit : mm
UNCOATED
TANK-POWER COATED
Mill
Diameter
js12
E9A35060
E9A35070
E9A35080
E9A35090
E9A35100
E9A35120
E9A35140
E9A35160
E9A35180
E9A35200
E9A35220
E9A35250
GAA35060
GAA35070
GAA35080
GAA35090
GAA35100
GAA35120
GAA35140
GAA35160
GAA35180
GAA35200
GAA35220
GAA35250
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
Shank
Diameter
h6
Length
of Cut
Overall
Length
No. of
Flute
6
10
10
10
10
12
12
16
16
20
20
25
24
30
38
38
45
53
53
63
63
75
75
90
68
80
88
88
95
110
110
123
123
141
141
166
3
3
3
3
4
4
4
4
4
4
5
5
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS

from 1 to 3
von 1 bis 3
over 3 to 6
ber 3 bis 6
over 6 to 10
ber 6 bis 10
50
0
6
60
0
8
75
0
9
js12
h6
GENERAL
CARBIDE
END MILLS

90
0
11
V7 Mill INOX
END MILLS
105
0
13
125
0
16
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
Copper
Graphite

Steels
Titanium
: Good
Inconel
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
E9A26 SERIES
GAA26 SERIES
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, MULTI FLUTE 45HELIX SHORT LENGTH ROUGHING - FINE

RECHTSSPIRALE KURZ SCHRUPFRSER - FEIN
PREMIUM HSS-PM, MULTI SCHNEIDEN 45
High chip removal and minimizing breakages of cutting edges.
Designed to machine carbon steels, alloyed steels, stainless
steels
speed cutting
Schnelle Spanabfuhr und Minimierung von

Schneidkantenausbrchen
Stahl.
D3
X5070
END MILLS
D2
D1
L1
X-POWER
END MILLS
L3
L2
JET-POWER
END MILLS
P.894
Unit : mm
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
UNCOATED
TANK-POWER COATED
Mill
Diameter
D(js12)
E9A26040
E9A26050
E9A26060
E9A26070
E9A26080
E9A26090
E9A26100
E9A26120
E9A26140
E9A26160
E9A26180
E9A26200
E9A26250
GAA26040
GAA26050
GAA26060
GAA26070
GAA26080
GAA26090
GAA26100
GAA26120
GAA26140
GAA26160
GAA26180
GAA26200
GAA26250
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
25.0
EDP No.
Shank
Diameter
D2 (h6)
Length
of Cut
L1
Length
Below Shank
L3
Overall
Length
L2
Neck
Diameter
D3
No. of
Flute
6
6
6
10
10
10
10
12
12
16
16
20
25
11
13
13
16
19
19
22
26
26
32
32
38
45
31
37
44
54
63
57
57
57
66
69
69
72
83
83
92
92
104
121
9.5
11.5
15
19
24
3
4
4
4
4
4
4
4
5
5
6
6
6

from 1 to 3
von 1 bis 3
over 3 to 6
ber 3 bis 6
over 6 to 10
ber 6 bis 10
50
0
6
60
0
8
75
0
9
js12
h6

90
0
11
105
0
13
125
0
16
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
886 phone:+82-32-526-0909,
Copper
Graphite

Steels
Titanium
: Good
Inconel
CARBIDE
E9A33 SERIES
GAA33 SERIES
TANK-POWER
END MILLS
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, MULTI FLUTE SHORT LENGTH ROUGHING - COARSE

PREMIUM HSS-PM, MULTI SCHNEIDEN KURZ SCHRUPFRSER - GROB
stainless steels.
speed cutting.

Stahl.
Bis D<=20mm : mit Zentrumschnitt, ber D<=20mm : Ohne Zentrumschnitt.
HSS
CBN
END MILLS
i-Xmill
END MILLS
X5070
END MILLS
up to 9
10 ~ 20
X-POWER
END MILLS
over 20
JET-POWER
END MILLS
~20
22~
P.894
Unit : mm
UNCOATED
TANK-POWER COATED
Mill
Diameter
js12
E9A33060
E9A33070
E9A33080
E9A33090
E9A33100
E9A33120
E9A33140
E9A33160
E9A33180
E9A33200
E9A33220
E9A33250
GAA33060
GAA33070
GAA33080
GAA33090
GAA33100
GAA33120
GAA33140
GAA33160
GAA33180
GAA33200
GAA33220
GAA33250
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
Shank
Diameter
h6
Length
of Cut
Overall
Length
No. of
Flute
6
10
10
10
10
12
12
16
16
20
20
25
13
16
19
19
22
26
26
32
32
38
38
45
57
66
69
69
72
83
83
92
92
104
104
121
3
3
3
3
4
4
4
4
4
4
5
5
V7 Mill STEEL
END MILLS
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS

from 1 to 3
von 1 bis 3
over 3 to 6
ber 3 bis 6
over 6 to 10
ber 6 bis 10
50
0
6
60
0
8
75
0
9
js12
h6
GENERAL
CARBIDE
END MILLS

90
0
11
V7 Mill INOX
END MILLS
105
0
13
125
0
16
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
Copper
Graphite

Steels
Titanium
: Good
Inconel
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
E9A34 SERIES
GAA34 SERIES
FLAT SHANK
FLAT SHANK
PREMIUM HSS-PM, MULTI FLUTE LONG LENGTH ROUGHING - COARSE

PREMIUM HSS-PM, MULTI SCHNEIDEN LANG SCHRUPFRSER - GROB
stainless steels.
speed cutting.

Stahl.
Bis D<=20mm : mit Zentrumschnitt, ber D<=20mm : Ohne Zentrumschnitt.
X5070
END MILLS
X-POWER
END MILLS
up to 9
10 ~ 20
over 20
JET-POWER
END MILLS
~20
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
UNCOATED
TANK-POWER COATED
Mill
Diameter
js12
E9A34060
E9A34070
E9A34080
E9A34090
E9A34100
E9A34120
E9A34140
E9A34160
E9A34180
E9A34200
E9A34220
E9A34250
GAA34060
GAA34070
GAA34080
GAA34090
GAA34100
GAA34120
GAA34140
GAA34160
GAA34180
GAA34200
GAA34220
GAA34250
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
EDP No.
Shank
Diameter
h6
Length
of Cut
Overall
Length
No. of
Flute
6
10
10
10
10
12
12
16
16
20
20
25
24
30
38
38
45
53
53
63
63
75
75
90
68
80
88
88
95
110
110
123
123
141
141
166
3
3
3
3
4
4
4
4
4
4
5
5

GENERAL
CARBIDE
END MILLS
from 1 to 3
von 1 bis 3
over 3 to 6
ber 3 bis 6
over 6 to 10
ber 6 bis 10
50
0
6
60
0
8
75
0
9
js12
TANK-POWER
END MILLS
P.894
Unit : mm
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
22~
h6

90
0
11
105
0
13
125
0
16
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
: Excellent
Carbon
Steels
Alloy
Steels
~HB225 HB225~325
Prehardened
Steels
Hardened Steels
High Hardened
Steels
HRc30~40
HRc40~45 HRc45~55
HRc55~70
888 phone:+82-32-526-0909,
Copper
Graphite

Steels
Titanium
: Good
Inconel
CARBIDE
TANK-POWER
END MILLS

HSS
PREMIUM HSS-PM, 2 FLUTE - SLOTTING

PREMIUM HSS-PM, 2 SCHNEIDEN - NUTENFRSEN
CBN
END MILLS
GA936, GAA29 SERIES

MATERIAL
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
7000
5000
4300
3900
3500
2600
2100
1800
1600
1350
1150
950
840
750
115
160
230
255
265
275
300
275
265
265
240
220
185
155
5900
4100
3600
3250
2900
2200
1800
1450
1250
1150
950
780
710
630
90
135
175
200
210
240
265
240
210
195
195
165
150
140
4900
3350
3150
2600
2300
1800
1450
1150
1000
890
790
700
600
490
80
115
160
185
190
200
230
210
195
180
160
150
125
115
3150
2300
2000
1700
1450
1150
900
740
630
560
500
440
400
360
65
80
92
102
110
115
125
115
110
102
100
92
80
75
2000
1800
1600
1350
1150
890
700
580
500
440
400
360
320
250
40
62
75
75
85
85
102
85
80
80
75
70
55
52
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
0.5D
RPM = rev./min.
FEED = mm/min.

D-POWER
END MILLS
E9936, E9A29 SERIES

MATERIAL
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
HARDNESS
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
4800
3300
2900
2600
2300
1800
1400
1200
1100
900
800
640
570
510
70
100
140
160
160
170
180
170
160
160
150
130
110
95
4000
2800
2400
2200
2000
1500
1200
1000
850
750
640
540
480
430
55
85
110
125
135
150
165
150
140
135
120
100
90
85
3300
2200
2100
1800
1600
1200
1000
800
680
600
530
480
400
340
50
75
100
115
120
125
140
130
120
110
100
95
75
70
2100
1600
1300
1100
1000
750
600
500
430
380
340
300
270
240
40
50
60
65
65
70
80
70
65
65
55
55
50
45
1300
1200
1050
900
750
600
480
400
340
300
270
240
210
175
25
40
45
45
55
55
65
55
50
50
45
40
35
30
STRENGTH
~ 500N/mm2
500 ~ 800N/mm2
0.5D
D
ALU-POWER
END MILLS
RPM = rev./min.
FEED = mm/min.
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS

GA942, GAA30 SERIES

MATERIAL
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS

STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
6500
4600
4300
3800
3350
2600
100
1800
1600
1350
1150
950
840
750
70
102
140
160
230
240
250
275
250
240
240
230
230
240
5500
3900
3600
3200
2800
2200
1800
1450
1350
1150
890
790
730
630
55
85
115
130
190
210
210
230
220
210
190
190
195
210
4800
3350
3000
2600
2300
1800
1400
1200
1000
890
790
700
600
490
45
52
80
92
140
150
160
170
160
150
150
140
150
160
3000
2200
1900
1700
1450
1150
890
740
660
560
500
440
400
360
35
45
52
62
92
102
115
115
110
102
95
92
95
102
1900
1800
1500
1300
1100
890
680
580
500
440
400
360
315
250
28
45
55
55
75
85
92
92
85
85
80
80
85
85
0.5D
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
PREMIUM HSS-PM, 3 FLUTE - SIDE CUTTING

PREMIUM HSS-PM, 3 SCHNEIDEN - SEITENFRSEN
GA942, GAA30 SERIES

MATERIAL
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
RPM = rev./min.
FEED = mm/min.
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
8200
5800
5200
4700
4200
3200
2500
2100
1800
1600
1350
1250
1150
1000
100
145
185
210
300
330
350
350
350
330
310
300
310
330
6800
4800
4400
4000
3600
2600
2100
1800
1500
1300
1150
1050
950
840
80
120
155
175
250
270
290
300
285
275
265
255
265
275
5500
3800
3500
2900
2600
2000
1600
1400
1150
1000
890
780
740
630
65
75
110
125
190
200
210
230
210
200
195
190
195
210
3800
2700
2300
2000
1800
1300
1000
900
780
660
580
520
470
420
50
65
75
85
125
140
150
150
140
140
130
125
130
135
2400
2200
1900
1700
1500
1100
890
740
630
550
500
440
400
360
40
65
75
75
100
115
125
125
120
115
110
110
110
120
1.5D
0.1D
890 phone:+82-32-526-0909,
RPM = rev./min.
FEED = mm/min.
CARBIDE
TANK-POWER
END MILLS

HSS

CBN
END MILLS
E9942, E9A30 SERIES

MATERIAL
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
4400
3150
2900
2600
2300
1800
1400
1200
1070
930
780
640
570
520
45
65
85
100
145
150
155
170
155
150
150
145
145
150
3700
2650
2400
2150
1900
1500
1200
1000
930
780
610
530
500
430
35
55
70
80
120
130
130
145
135
130
120
120
120
130
3300
3200
2100
1800
1600
1200
960
820
680
610
530
480
410
340
30
30
50
55
85
95
100
105
100
95
95
85
95
100
2100
1500
1300
1100
1000
780
610
500
450
380
350
300
270
240
20
30
35
40
55
65
70
70
65
65
60
55
60
65
1300
1200
1000
890
750
610
460
395
345
300
270
245
215
170
18
28
35
35
45
55
58
58
55
55
50
50
55
55
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS
0.5D
RPM = rev./min.
FEED = mm/min.

D-POWER
END MILLS
E9942, E9A30 SERIES

MATERIAL
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
HARDNESS
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
5600
3900
3600
3200
2800
2100
1700
1400
1200
1100
930
860
790
680
60
90
115
130
190
210
210
220
215
210
195
185
195
210
4600
3300
3000
2700
2400
1800
1400
1200
1000
890
790
720
650
580
50
75
95
110
155
170
180
185
180
170
165
155
165
170
3700
1600
2400
2000
1800
1350
1100
930
780
680
610
540
500
430
40
45
68
80
120
125
130
145
130
125
120
120
120
130
2600
1800
1600
1400
1200
890
710
610
540
440
390
360
320
290
32
40
45
55
80
85
95
95
90
85
80
80
80
85
1600
1500
1300
1100
1000
710
610
500
430
370
340
300
270
240
25
40
45
45
65
70
80
80
75
70
68
68
68
75
STRENGTH
~ 500N/mm2
500 ~ 800N/mm2
1.5D
0.1D
ALU-POWER
END MILLS
RPM = rev./min.
FEED = mm/min.
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS

GA938, GAA31 SERIES

MATERIAL
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
V7 Mill INOX
END MILLS
V7 Mill STEEL
END MILLS

STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
9200
6600
5300
4400
3900
3100
2300
2000
1800
1600
1500
1250
1050
1000
290
410
480
510
540
570
630
570
550
510
460
440
410
370
8400
6000
4700
4000
3600
2600
2100
1800
1600
1400
1250
1050
950
840
240
350
400
420
450
480
530
480
460
430
400
370
320
305
6100
4400
3600
2900
2600
2000
1600
1400
1100
1000
890
780
680
630
170
250
300
320
330
370
380
370
350
340
310
275
255
230
4100
2700
2300
2000
1800
1400
1000
890
790
680
630
530
470
420
125
180
200
220
230
240
265
240
230
220
195
175
160
150
3300
2400
2000
1700
1450
1150
890
720
630
550
500
440
400
360
85
125
150
160
180
185
200
185
170
165
150
140
130
125
1.5D
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS

E9938, E9A31 SERIES

MATERIAL
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
TECHNICAL
DATA
RPM = rev./min.
FEED = mm/min.
0.1D
CARBON STEELS
ALLOY STEELS
TOOL STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc35
ALLOY STEELS
TOOL STEELS
AUSTENITIC
STAINLESS STEELS
HRc35 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1100N/mm2
1100 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
6300
4500
3600
3000
2600
2100
1600
1300
1200
1100
1000
850
710
680
180
260
300
310
330
360
390
360
340
310
280
270
260
230
5700
4000
3200
2700
2400
1800
1400
1200
1100
900
850
710
640
570
150
210
250
265
275
300
330
300
285
265
250
230
200
190
4000
3000
2400
2000
1800
1400
1100
900
780
680
600
540
460
430
110
155
190
195
205
230
235
230
215
205
190
175
160
140
2800
2000
1600
1400
1200
900
710
600
530
450
430
360
320
280
75
110
125
135
140
150
165
150
140
135
120
110
100
95
2300
1650
1350
1125
975
750
600
495
430
375
340
300
270
240
55
80
95
100
110
115
125
115
105
100
95
85
80
80
1.5D
0.1D
892 phone:+82-32-526-0909,
RPM = rev./min.
FEED = mm/min.
CARBIDE
TANK-POWER
END MILLS

HSS
PREMIUM HSS-PM, 2 FLUTE BALL NOSE - PROFILING

PREMIUM HSS-PM, 2 SCHNEIDEN STIRNRADIUS - PROFILFRSEN
CBN
END MILLS
GA940, GAA32 SERIES

MATERIAL
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
R1.5 3.0
R2.0 4.0
R3.0 6.0
R4.0 8.0
R5.0 10.0
R6.0 12.0
R8.0 16.0
R10.0 20.0
R12.5 25.0
7300
6000
4400
3350
2750
2300
1700
1350
950
340
430
480
530
600
530
480
420
310
5800
4620
3500
2600
2100
1800
1300
1000
740
230
290
320
350
400
350
320
280
210
3900
3000
2300
1800
1400
1200
890
680
470
125
160
180
200
230
200
180
150
115
2000
1600
1200
890
680
580
440
360
250
55
75
85
85
102
85
80
70
52
i-Xmill
END MILLS
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
V7 Mill INOX
END MILLS
0.2D
0.5D
V7 Mill STEEL
END MILLS
RPM = rev./min.
FEED = mm/min.
ALU-POWER
END MILLS
PREMIUM HSS-PM, 2 FLUTE BALL NOSE - PROFILING

PREMIUM HSS-PM, 2 SCHNEIDEN STIRNRADIUS - PROFILFRSEN
D-POWER
END MILLS
E9940, E9A32 SERIES

MATERIAL
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc40
HARDNESS
~ 500N/mm2
STRENGTH
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1300N/mm2
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
R1.5 3.0
R2.0 4.0
R3.0 6.0
R4.0 8.0
R5.0 10.0
R6.0 12.0
R8.0 16.0
R10.0 20.0
R12.5 25.0
5000
4000
3000
2300
1800
1500
1100
930
640
210
260
300
330
370
330
300
260
190
3900
3100
2300
1800
1400
1200
900
710
500
140
180
200
220
250
220
200
170
130
2600
2100
1600
1200
1000
820
600
480
340
80
100
110
125
140
125
110
95
70
1300
1000
820
600
480
400
300
240
175
35
45
55
55
65
55
50
45
30
K-2 CARBIDE
END MILLS
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
0.2D
TECHNICAL
DATA
0.5D
RPM = rev./min.
FEED = mm/min.
CARBIDE
TANK-POWER
END MILLS
HSS
CBN
END MILLS
i-Xmill
END MILLS
PREMIUM HSS-PM, MULTI FLUTE ROUGHING - SIDE CUTTING

PREMIUM HSS-PM, MULTI SCHNEIDEN SCHRUPFRSER - SEITENFRSEN
GA941, GAA35, GAA33, GAA34, GAA26 SERIES

MATERIAL
X5070
END MILLS
X-POWER
END MILLS
JET-POWER
END MILLS
V7 Mill INOX
END MILLS

STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
2800
2400
1900
1600
1400
1200
1050
960
890
790
230
290
415
415
415
415
415
425
425
415
2200
1900
1500
1200
1050
950
890
760
650
600
180
230
315
330
330
330
330
330
330
315
1600
1400
1050
900
760
660
610
530
470
420
115
160
195
230
230
230
230
230
230
220
1300
1050
890
740
630
550
490
440
400
360
105
125
160
180
180
180
180
180
180
180
1.5D
V7 Mill STEEL
END MILLS
0.5D
RPM = rev./min.
FEED = mm/min.
ALU-POWER
END MILLS
D-POWER
END MILLS
K-2 CARBIDE
END MILLS
PREMIUM HSS-PM, MULTI FLUTE ROUGHING - SIDE CUTTING

PREMIUM HSS-PM, MULTI SCHNEIDEN SCHRUPFRSER - SEITENFRSEN
E9941, E9A35, E9A33, E9A34, E9A26 SERIES

MATERIAL
GENERAL
CARBIDE
END MILLS
TANK-POWER
END MILLS
GENERAL
HSS
END MILLS
MILLING
CUTTERS
STRUCTURAL STEELS
CARBON STEELS
STRUCTURAL STEELS
CARBON STEELS
CAST IRONS
~ HRc20
HRc20 ~ HRc30
HRc30 ~ HRc40
~ 500N/mm2
500 ~ 800N/mm2
800 ~ 1000N/mm2
1000 ~ 1300N/mm2
HARDNESS
STRENGTH
CARBON STEELS
ALLOY STEELS
TOOL STEELS
PREHARDENED STEELS
ALLOY STEELS
TOOL STEELS
DIAMETER
RPM
FEED
RPM
FEED
RPM
FEED
RPM
FEED
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
1900
1600
1300
1100
930
820
710
660
610
540
140
180
260
260
260
260
260
265
265
260
1500
1300
1000
820
710
640
610
510
440
400
110
140
195
205
205
205
205
205
205
195
1050
900
710
600
510
450
410
360
320
280
70
100
125
140
140
140
140
140
140
135
900
740
600
500
430
370
330
300
270
240
65
80
100
110
110
110
110
110
110
110
1.5D
TECHNICAL
DATA
0.5D
RPM = rev./min.
FEED = mm/min.
894 phone:+82-32-526-0909,

Tank Power PDF

Uploaded by

Copyright:

Available Formats

Tank Power PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tank Power PDF

Uploaded by

Copyright:

Available Formats

HSS

Being the best through innovation

PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH

PREMIUM HSS-PM, MULTI SCHNEIDEN 45RECHTSSPIRALE KURZ SCHRUPFRSER - FEIN D4.0

PREMIUM HSS-PM, 2 SCHNEIDEN KURZ

PREMIUM HSS-PM, 2 FLUTE LONG LENGTH

PREMIUM HSS-PM, 3 FLUTE STUB LENGTH

PREMIUM HSS-PM, 3 FLUTE SHORT LENGTH

PREMIUM HSS-PM, 4 FLUTE SHORT LENGTH

PREMIUM HSS-PM, 4 FLUTE LONG LENGTH

PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH BALL NOSE

PREMIUM HSS-PM, 2 FLUTE LONG LENGTH BALL NOSE

PREMIUM HSS-PM, MULTI FLUTE SHORT LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI FLUTE LONG LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI FLUTE, 45HELIX SHORT LENGTH ROUGHING - FINE

PREMIUM HSS-PM, MULTI FLUTE SHORT LENGTH ROUGHING - COARSE

PREMIUM HSS-PM, MULTI FLUTE LONG LENGTH ROUGHING - COARSE

RECOMMENDED CUTTING CONDITIONS

fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr

TANK-POWER END MILLS

Graphite Cast Iron Aluminum Stainless

phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr 875

PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH

2 Flute design for slotting.

2 Schneiden, Geeignet fr Nutenfrsen.

Tolerances according to DIN 7160 & 7161

Tolerance range in / Toleranzwerte in

Cast Iron Aluminum Stainless

fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr

PREMIUM HSS-PM, 2 FLUTE LONG LENGTH

2 Flute design for slotting.

2 Schneiden, Geeignet fr Nutenfrsen.

Tolerances according to DIN 7160 & 7161

Tolerance range in / Toleranzwerte in

Cast Iron Aluminum Stainless

phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr 877

PREMIUM HSS-PM, 3 FLUTE STUB LENGTH

Verstrkter Kern zur Erhhung der Stabilitt.

up to 1mm over 1mm

Tolerances according to DIN 7160 & 7161

Tolerance range in / Toleranzwerte in

Cast Iron Aluminum Stainless

fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr

PREMIUM HSS-PM, 3 FLUTE SHORT LENGTH

Verstrkter Kern zur Erhhung der Stabilitt.

up to 1mm over 1mm

Tolerances according to DIN 7160 & 7161

Tolerance range in / Toleranzwerte in

Cast Iron Aluminum Stainless

phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr 879

PREMIUM HSS-PM, 4 FLUTE SHORT LENGTH

Empfohlen fr Taschenfrsen, Nockenfrsen, Gussformen und

Cast Iron Aluminum Stainless

fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr

PREMIUM HSS-PM, 4 FLUTE LONG LENGTH

Empfohlen fr Taschenfrsen, Nockenfrsen, Gussformen und

Cast Iron Aluminum Stainless

phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr 881

PREMIUM HSS-PM, 2 FLUTE SHORT LENGTH BALL NOSE