Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Ms 16142

    Uploaded by

    Bryan Martinez
    409 views2 pages
    This document provides standard dimensions for a boss, gasket seal straight thread tube fitting. It specifies thread sizes from 1/8 inch to 2-1/2 inches with minimum and maximum diameters, depths, and other geometric features. Tolerances are given to ensure proper fitting of threaded components. The drawing and table are intended to define the fitting geometry and achieve interchangeability.

    Original Description:

    Ms 16142

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides standard dimensions for a boss, gasket seal straight thread tube fitting. It specifies thread sizes from 1/8 inch to 2-1/2 inches with minimum and maximum diameters, depths, and other geometric features. Tolerances are given to ensure proper fitting of threaded components. The drawing and table are intended to define the fitting geometry and achieve interchangeability.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    409 views2 pages

    Ms 16142

    Uploaded by

    Bryan Martinez
    This document provides standard dimensions for a boss, gasket seal straight thread tube fitting. It specifies thread sizes from 1/8 inch to 2-1/2 inches with minimum and maximum diameters, depths, and other geometric features. Tolerances are given to ensure proper fitting of threaded components. The drawing and table are intended to define the fitting geometry and achieve interchangeability.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    -.

    ,,
    (,

    ,4730

    THIS SURFACESHALL SE SQUARE


    WITH THD. P.D. WITHIN .010 F.,1.R.
    WHEN MEASURED AT DIA. L

    \
    +

    OIAMETER D SHALL SE CONCENTRIC


    WITH THREAD R 0. WITHIN 005 F.I. R

    FDIA. SFOT13MX ~

    D DIA.

    UI

    1=I

    VP
    C DIA. THIS DIM APPLIES
    0NL% WHEN TAP DRIU
    CAN NOT PASS THRU ENTIRE BOSS

    z
    :
    IMTWINATIONAL
    IltT@EEsr

    SH

    0C

    denotes

    .[
    4

    change (s)

    TITLE

    k C,*

    ,/

    BOSS, GAS-T SEAL STRAIGHTTHREAD


    T(JM FITTING, STANDARDDIMENSIONS
    POR

    IOcW@lMNTiPl!CIFICATION suPcRscoE$t
    NONE
    I

    D ,%,

    672-1

    Iuu/rrocmitom~rlorn)

    IUILITARY

    AAS16M2($H)
    ~age

    ...

    ,0.,

    .0,7,., ,.,

    ,,,

    ,0..

    . . . 0.,0

    .,.,

    Source: http://www.assistdocs.com -- Downloaded: 2012-05-17T18:02Z


    Check the source to verify that this is the current version before use.

    $? AMOARO

    1 ok 2
    Project 4730-IU065

    .
    -.-.-

    Straight

    iiam~ter

    minor

    Pitch
    diameter

    nat-

    side

    Ta

    thread

    L*e

    Thread

    dhnteter

    mall

    size

    thread
    x

    depth
    min.

    94ax.

    Inches

    1/0
    3/16
    1/4
    5/16
    3/8
    1/2
    :;:
    7/8
    1
    1-1/4
    1-1/2
    2

    0.2854 0.2902
    .3479 .352ti
    3/8-24m-2B
    7/16-2W5NP-2B .4050 .410.4
    .4675 .4731
    V2-20WW-2E)
    9/16-18UNF-2B .5264 .5323
    *7094 .7159
    3/4-16UNF-2B
    7/8-14WPJF-213 .8286 .8356
    1.00841.0158
    l-1/16-12UP!-2B
    l-3/16-L2WN-2B1.13341.1409
    1.25841.2659
    l-5/16-12UN-218
    l-!vB-12wN-2El1.57091.57%5
    l-7\8-12UN-2B 1.82091.8287
    2.44592.4540
    2-1/2-12wPa2E+
    5/16-24?JNE=2B

    0.390
    .390
    .454
    .454
    .500
    .562
    .656
    .750
    .750

    0.277

    0.267
    .330
    .3$3
    .4%6
    .502
    .682
    .798
    .972

    .34!0
    .395
    .457
    0515
    .696
    .814
    .990
    1.097 1.115
    1.222 1.240
    1.535 1.553
    1.7851.803
    2.410 2.428

    .750
    .750

    0
    c

    IbJ

    w.ni4iniilum
    liam3ter

    fiwm

    +0.005
    - .000

    +().015 diam- .000 eter

    Mimi-

    +1

    &&$r@@

    mwn

    SW!
    note
    1

    Mini
    mum
    dhn-

    @ter

    see
    note 1
    Degrees

    ).062
    .125
    .172
    .234
    .297
    .391
    .484
    .609
    .719
    .844
    k.078
    1..3I2
    ).78J
    .---

    0.358
    .421
    .487
    .550
    .616
    .811
    .942
    1.148
    1.273
    1.398
    1.713
    1.962
    2.587

    If

    face

    0.074
    .074
    .093
    .093
    .097
    .100
    .100
    .130
    .130
    .13C
    .132
    .132
    .132
    . ..-.

    .906
    .906
    .906
    .906
    ..

    1.910
    2.270

    2.560
    3.480
    ..

    c)fboss is

    0.438
    .500
    .563
    .625
    .6$8
    .875
    L.000
    1.250
    1,37!5
    1.500
    1.875
    2.125
    2.750

    12
    12
    12
    12
    12
    15
    15
    15
    15
    15
    15
    15
    15

    0.672 0.468
    .750
    .468
    .547
    .828
    .906
    .547
    .609
    ..969
    ,688
    1.188
    .781
    1.344
    1.625
    .906
    1.765
    .906

    0.062
    .062
    .062
    .062
    .062
    .094
    .094
    .094
    .094
    .125
    .125
    .125
    .125

    machined surface, dimensions IFand M need

    not apply.
    SE

    llW~RNAT16MAL
    INTEREST

    TITLE

    ,Ilol C.. t

    BOSS,

    GASKET

    TWBE FTTTING,
    i&ijIiiXiiiiiiRCI

    Iu. x%%.u

    STRAXGMETEUUEAD

    SEAL

    >_FOR
    ..

    !,.lMlrE.o

    cmR,),,,.41,0,v/

    .!O,,

    $TAHBABO

    MS16142[SH]
    i%age

    !!.

    QvARY

    STACWlARt9
    DXMENSXOEW

    FICATlON NIPQR$EOC$:

    Mlfi

    , ,,,,

    !,,,.,

    ffU.8.

    ,,,

    ,,. ,,

    ,0.

    . . .

    O,O,

    2 of

    GOVWMUMWVTF%WNTWJGOFFICE: 198.1 703-023/7841

    Source: http://www.assistdocs.com -- Downloaded: 2012-05-17T18:02Z


    Check the source to verify that this is the current version before use.

    ,?,

    .-

    You might also like