Diesel Generator set KTA19 series engine

576kVA - 650kVA 50Hz 501kW 60Hz

> Specification sheet
Our energy working for you.
Description
This generator set is designed in facilities certified to ISO9001 and manufactured in facilities certified to ISO9001 or ISO9002.

Features
Cummins Heavy-Duty Engine - Rugged 4-cycle industrial diesel delivers reliable power, low emissions and fast response to load changes. Permanent Magnet Generator (PMG) - Offers enhanced motor starting and fault clearing short circuit capability. Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings; low waveform distortion with non-linear loads, fault clearing shortcircuits capability, and class H insulation. Control System - Standard PowerCommand electronic control provides total system integration including remote start/stop, precise frequency and voltage regulation, alarm and status message display, AmpSentry protection, output metering, auto-shutdown. Cooling System - Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat. Enclosures - Optional weather-protective and soundattenuated enclosures are available. Warranty and Service - Backed by a comprehensive warranty and worldwide distributor network.

This Cummins Power Generation commercial generator set is a fully integrated power generation system, providing optimum performance, reliability, and versatility for stationary standby, prime power, and continuous duty applications.
Generator Set Performance Voltage Regulation Maintains voltage output to within 1.0%. At any power factor between 0.8 and 1.0 At any variations from No load to Full load. At any variations from Cold to Hot. At speed droop variations up to 4.5%. Frequency Regulation Isochronous under varying loads from no load to 100% full load when electronic governor is fitted. Random Frequency Variation Will not exceed 0.25% of its mean value for constant loads no load to full load. Waveform Total harmonic distortion open circuit voltage waveform in the order of 1.8%. Three-phase balanced load in the order of 5.0%. Telephone Influence Factor (TIF) TIF better than 50. THF to BS 4999 Part 40 better than 2%. Alternator Temperature Rise Class H insulation. Radio Interference In compliance with BS 800 and VDE levels G and N.

Standby Rating
Model C575 D5B C650 D5A C500 D6B 50Hz kVA (kW) 576.25 (461) 650 (520) N/A 60Hz kW (kVA) N/A N/A 501 (626.25)

Prime Rating
50Hz kVA (kW) 511.25 (409) 590 (472) N/A 60Hz kW (kVA) N/A N/A 449 (561.25)

2007 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered trademark of Cummins Power Generation Inc. "Our energy working for you." is a trademark of Cummins Power Generation.
APSB-1154-07 (9/07)

Generator Set Specifications

Governor Regulation Class Voltage Regulation, No Load to Full Load Random Voltage Variation Frequency Regulation Random Frequency Variation Radio Frequency Emissions Compliance ISO8528 1% 1% Isochronous 0.25% In compliance with BS 800 and VDE levels G and N.

Engine Specifications
Design Bore Stroke Displacement Cylinder Block Battery Capacity Battery Charging Alternator Starting Voltage Fuel System Fuel Filter Air Cleaner Type Lube Oil Filter Type(s) Standard Cooling System 4-cycle, in-line, Turbocharged, Aftercooled 159 mm (6.26 in.) 159 mm (6.26 in.) 18.9 liter (1150 in.) Cast iron, 6 cylinder 150A/hr 35 amps 24 volt, negative ground Direct injection Spin on fuel filters with water separator Dry element Spin-on full flow 104F (40C) ambient radiator

Alternator Specifications
Design Stator Rotor Insulation System Standard Temperature Rise Exciter Type Phase Rotation Alternator Cooling AC Waveform Total Harmonic Distortion Telephone Influence Factor (TIF) Telephone Harmonic Factor (THF) Brushless single bearing, drip proof revolving field 2/3 pitch Single bearing, flexible disc Class H 163C - 125C Standby/Prime Self Excited A (U), B (V), C (W) Direct drive centrifugal blower fan No load < 1.5%. Non distorting balanced linear load < 5% <50 per NEMA MG1-22.43 <2%

Available Voltages
50Hz Line Neutral / Line - Line
 240/416  230/400  220/380                   277/480  220/380  139/240     

60Hz Line Neutral / Line - Line

           

Generator Set Options

Engine  Heavy Duty air filter
 Water jacket heater 220/240 v

Alternator  Alternator heater

 Exciter voltage regulator (PMG)

Silencer  Critical silencer

 Residential silencer

Cooling  Antifreeze 50/50 (Ethylene glycol) Enclosure  Sound attentuated enclosure

Control Panel  4 pole Main Circuit Breaker

 PCC3100

Our energy working for you. www.cumminspower.com

2007 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered trademark of Cummins Power Generation Inc. "Our energy working for you." is a trademark of Cummins Power Generation.
APSB-1153-07 (9/07)

Control System - PCC2100

P C The PowerCommand 2100 Control is a microprocessor-based generator set monitoring, and control system. The control provides an operator interface to the genset, digital voltage regulation, digital governing and generator set protective functions. The PowerCommand 2100 generator set control is suitable for use on a wide range of generator sets in non-paralleling applications. The PowerCommand Control can be configured for any frequency, voltage and power connection configuration from 120 to 600VAC for for 50Hz or 60Hz operation. Power for the control is derived from the generator set starting batteries. The control functions over a voltage range from 8VDC to 35VDC.

Major Features
12 or 24 VDC Battery Operation. Digital Engine Speed Governing (optional) to provide isochronous frequency regulation. Digital Voltage Regulation with 3-phase sensing AmpSentry Protection for true alternator overcurrent protection. Digital AC Output Metering with Optional Analog Metering. Battery Monitoring System to sense and warn against a weak battery condition. Digital Alarm and Status Message Display Generator set Monitoring: Displays status of all critical engine and alternator generator set functions. Smart Starting Control System: Integrated fuel ramping to limit black smoke and frequency overshoot, Advanced Serviceability using InPower, a PC-based software service tool.

Control System
Includes all functions to locally or remotely start and stop, and protect the generator set. Control Switch - RUN/OFF/AUTO OFF Mode - the generator set is shut down and cannot be started RUN mode the generator set will execute its start sequence AUTO mode, the generator set can be started with a start signal from a remote device LED Indicating Lamps - includes LED indicating lamps for the following functions: Generator set running Not-in-auto mode Common warning Five LED indicating lamps that are configurable for colour and function Low oil pressure warning High engine temperature warning Low oil pressure shutdown Overspeed shutdown Fail to start Emergency Stop Switch. Immediate shut down of the generator set on operation. Base Engine Protection: Overspeed shutdown Low Oil Pressure Warning / Shutdown High Engine Temperature Warning / Shutdown Underspeed / Sensor Fail Shutdown Fail to Start / Fail to Crank Low / high battery voltage

Options
Analog AC Metering Panel Key Type Mode Selector Switch Exhaust Temperature Monitoring PowerCommand Network CAN Engine Interface (Optional on Some Models) Refer to the PowerCommand Controls Technical Bulletin for detailed information (S1409d)

Our energy working for you. www.cumminspower.com

2007 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered trademark of Cummins Power Generation Inc. "Our energy working for you." is a trademark of Cummins Power Generation.
APSB-1153-07 (9/07)

Ratings Definitions
Standby: Limited Time Running: Prime (Unlimited Running Time): Base Load (Continuous):

Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO 8528. Fuel Stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514.

Applicable for supplying power to a constant electrical load for limited hours. Limited Time Running Power is in accordance with ISO 8528.

Applicable for supplying power to varying electrical load for unlimited hours. Prime Power is in accordance with ISO 8528.Ten percent overload capability is available in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514.

Applicable for supplying power continuously to a constant electrical load for unlimited hours. Continuous power in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 and BS 5514.

This outline drawing is to provide representative configuration details for Model series only. See respective model data sheet for specific model outline drawing number.

Do not use for installation design.

Model C575 D5B C650 D5A C500 D6B

Length (mm) 3419 3419 3419

Width (mm) 1246 1285 1246

Height (mm) 1906 1906 1906

Set weight dry kg 4205 4225 4055

Set weight wet kg 4373 4350 4223

Cummins Power Generation Asia Pacific

10 Toh Guan Road #07-01 TT International Tradepark Tel: (65) 6417 2388 Fax: (65) 6417 2399 E-Mail: cpg.apmktg@cummins.com

Our energy working for you. www.cumminspower.com

2007 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered trademark of Cummins Power Generation Inc. "Our energy working for you." is a trademark of Cummins Power Generation.
APSB-1153-07 (9/07)