NIC Components NCF Series
NIC Components NCF Series
NIC Components NCF Series
FEATURES
• ECONOMICALLY PRICED FOR COMMERCIAL AND INDUSTRIAL
APPLICATIONS
• WIDE SELECTION OF POWER RATINGS AND RESISTANCE VALUES
• EIA COLOR CODING RESISTANT TO INDUSTRIAL SOLVENTS
• AVAILABLE ON TAPE AND REEL FOR AUTOMATIC INSERTION AND BULK RoHS
PACK FOR SMALLER PRODUCTION RUNS
• NEW REDUCED SIZES AT HIGHER POWER RATINGS Compliant
includes all homogeneous materials
• ±5% TOLERANCE STANDARD
*See Part Number System for Details
STANDARD TYPES, RATINGS AND AVAILABILITY
Type NCF25R NCF25 NCF50 NCF50R NCF100 NCF200
Power Rating at 70°C 0.25W 0.25W 0.50W 0.50W 1.0W 2.0W
Max. Working Voltage at 70°C 250V 250V 350V 350V 500V 750V
Max. Overload Voltage at 70°C 500V 500V 700V 700V 1000V 1500V
Resistance Range ±5% (J) Tol. 1.0Ω~10MegΩ 0.5Ω~10MegΩ 1.0Ω~10MegΩ 1.0Ω~10MegΩ 1.0Ω~10MegΩ 1.0Ω~10MegΩ
Resistance Value Availability E-24 E-24 E-24 E-24 E-24 E-24
PERFORMANCE CHARACTERISTICS
Requirements Performance Test Method & Conditions
Operating Temperature Range -55 ~ +155°C (derated above +70°C - see chart) JIS C5202 MIL-R-10509F
(ppm/°C) 0.25W & Over NCF25R
Temperature 0 ~ -450 <100KΩ <22KΩ
5.2
Coefficient 0 ~ -700 110KΩ ~ 1megΩ 24KΩ ~ 470KΩ 4.6.12
1- to = 80°C
(ppm/°C) 0 ~ -1000 1.1megΩ ~ 2.2megΩ 510KΩ ~ 2.2megΩ
0 ~ -1300 2.4megΩ ~ 10megΩ 2.2megΩ ~ 10megΩ
(µV/V) (NCF25R) 0.25W & Over
0.1 - 0.5Ω ~ 10KΩ
JIS C5202 5.9
Noise (µV/V) 0.3 1.0Ω ~ 10KΩ 11Ω ~ 91KΩ
Method II
0.5 11Ω ~ 91KΩ 100KΩ ~ 1megΩ
1.0 100KΩ ~ 10megΩ 1.1megΩ ~ 10megΩ
Short Time Overload ∆R < ±(1%+0.05Ω) 5.5 Cond. A 4.6.6
Temperature Cycling ∆R < ±(0.5%+0.05Ω) 7.4-55°C/+85°C 4.6.4
Soldering Effect ∆R < ±(1%+0.05Ω) 6.4 350°C 3 sec. 4.6.10
Vibration ∆R < ±(0.5%+0.05Ω) 6.3 Cond. A 4.6.16
Moisture R > 100K ∆R < ±5% 7.9 40°C
4.6.11
Resistance R < 100K ∆R < ± (3%+0.05Ω) 90-95%RH 1000hrs
R > 100K ∆R < ± 3% 7.10
Load Life 4.6.13
R < 100k ∆R < ±(3%+0.05Ω) 70°C 1000hrs
* Maximum allowable continuous voltage (Vdc or rms) for all resistors is the
lower of the two values: “MAXIMUM WORKING VOLTAGE” as
specified, or
Power rating (WATTS x Resistance (OHMS)
Derating Curve
100
70oC
80
PERCENTAGE
RATED LOAD
50
40
20
2.0AMP
PART NUMBER SYSTEM
1.5AMP NZO 25 TR F
RoHS compliant
1.0AMP TR = Tape and Reel
0.5AMP Size:
25R = 1/8W Size
0 25 = 1/4W Size
0OC +25OC +50OC +75OC +100OC+125OC +155 C
O
-55OC -25OC Series
®
A C
REEL DIMENSIONS (mm)
Power Rating A max. B C ref. D max. E max F ± 1.0
1/8W ~ 2W 40 ~ 100 15
60 16 312 53
3W 70 ± 10 14.5
REEL
A D
Label F
Arbor Hole Dia.
E
C
Hub Recess I.D.
Recess Depth
MECHANICAL CHARACTERISTICS
LEAD PULL TEST
The lead wire shall withstand steady pull of the following weight axially to the lead wire for the minimum period of 10 seconds
without any breakage or damage:
Nom. Lead Diameter 0.4φmm 0.5φmm 0.6φmm 0.7φmm 0.8φmm & over
Steady Weight 1.0Kgs. 1.0Kgs. 1.5Kgs 2.0Kgs. 2.5Kgs.
SOLDERABILITY
The lead wire is immersed into 10% methanol or isopropyl alcohol of rosin by weight for a period of 2 ± 0.5 seconds. Then, it shall
be dipped into molten solder melted at 230 ± 5oC for a period of 5 ± 1 seconds approximately 1.5mm from the body of the resistor.
A new adhering coating of solder shall cover minimum 95% of the surface being dipped into solder.