R500LC 7

www.hyundai-ce.
com
ROBEX 500LC-7
Standard Equipment
Optional Equipment
ISO standard cab

All-weather steel cab with all-around visibility
Safety glass windows
Raise-up type windshield wiper
Sliding fold-in front window
Sliding side window
Lockable door
Hot & cool box
Accessory box & Ash-tray
AM/FM radio and cassette
Radio remote switch
Computer Aided Power Optimization
(New CAPO) system
2-power mode, 3-work mode, 2-user mode
Auto deceleration & one touch deceleration system
Auto warm up system
Auto overheat prevention system
Sun visor for cabin inside

Fuel filler pump (35 /min, 9.2 USgpm)
Beacon lamp
Safety lock valve for boom cylinder with
overload warning device
Safety lock valve for arm cylinder
Single acting piping kit (breaker, etc)
Double acting piping kit (clamshell, etc)
Accumulator, work equipment lowering
12 volt power supply (24V DC-12V DC converter)
Electric transducer
Air-conditioner(5,000kcal/hr, 20000BTU/hr)
Various optional Arms
Super short arm (2.40m, 7 10)
Short arm (2.90m, 9 6)
Long arm (4.00m, 13 1)
Super long arm (4.50m, 14 9)
Super long arm (5.85m, 19 2)
Heater (7500kcal/hr, 30000BTU/hr)

Heater & Defroster
Self diagnostic system
Centralized monitoring
LCD display
Engine speed
Clock & Error code
Gauges
Fuel level gauge
Engine coolant temperature gauge
Hyd. oil temperature gauge
Warning
Fuel level
Check Engine & CPU
Engine oil pressure
Engine coolant temperature
Hyd. oil temperature
Low battery
Air cleaner clogging
Indicator
Power boost.
Preheat & Engine warming-up
One touch decel
Starting Aid (air gride heater), cold weather
Door and cab locks, one key
Two outside rearview mirrors
Fully adjustable suspension seat with seat belt
Slidable joystick, pilot-operated
Console box tilting system (LH.)
Three front working light
Electric horn
Batteries (2 x 12V x 200AH)
Battery master switch
Removable reservoir tank
Automatic swing brake
Water separator, fuel line
Boom holding system
Arm holding system
Counterweight (10,200kg / 22,490lb)
Boom (7.06m, 23 2)
Arm (3.38m, 11 1)
Track shoes (600mm, 23.6)
Track rail guard
Travel alarm
Catwalk (LH)
NEW 7 SERIES
Tier II Engine
Various optional Buckets (SAE heaped)

Standard bucket (2.15m3, 2.81yd3)
Narrow bucket (1.38m3, 1.80yd3)
Narrow bucket (1.65m3, 2.16yd3)
Narrow bucket (1.84m3, 2.41 yd3)
Light duty bucket (2.56m3, 3.35yd3)
Heavy duty bucket (2.20m3, 2.88yd3)
Rock bucket (1.80m3, 2.35yd3)
Cabin lights
FOPS / FOG(ISO 10262)
Cabin Roof-Cover Transparent
Track shoes
Triple grouser shoe (700mm, 28)
Double grouser shoe (600mm, 24)
Double grouser shoe (700mm, 28)
Lower frame under cover
Preheating system
Fuel warmer
Tool kit
Operator suit
Special cowl
Full track guard
Tropical kit
Adjustable Air Suspension Seat
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.
All US measurement rounded off to nearest pounds or inches.
CRAWLER EXCAVATOR
CUMMINS QSM11-C Engine :
353 HP(263 kW)/ 1,900rpm
PLEASE CONTACT
Operating Weight :
48,800 ~ 49,340 kg (107,580 ~ 108,770 lb)
Bucket Capacity, SAE :
1.38 ~ 3.60 m3 (1.80 ~ 4.71 yd3)
www.hyundai-ce.com
2005. 10 Rev 0.
Photo may include optional equipment.
HYUNDAI CONSTRUCTION EQUIPMENT 02 /
03
Built for Maximum Power,

Performance, Reliability.
A new chapter in construction equipment
has now begun.
Making the dream a reality.
NEW 7 SERIES ROBEX 500LC-7
Technology in Cab Design
TECHNOLOGY IN CAB DESIGN 04 /
05
Operators Comfort is Foremost.

Wide Cab Exceeds Industry Standards.
Visibility
. Even more visibility than before, for safer, more efficient operating.
Excellent Ventilation
. Ventilation has been improved by the addition of the larger fresh air intake system,
and by providing additional air flow throughout the cab.
. Sliding front and side windows provide improved ventilation.
. A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator Environment

. The control levers and seat can be adjusted to provide maximum operator comfort.
. The seat is fully adjustable for optimum operating position, reducing operator
fatigue.
. Console boxes slide forward and backward for improved accessibility.
. The proportional pressure controls reduce unnecessary exertion while ensuring
precise operation.
. Large windows allow excellent visibility in all directions.
Low noise design

. The Robex 7series was designed with low operation noise in mind.
. Hyundai engineering helps to keep interior and exterior noise levels to a minimum.
. The cab's noise levels have been additionally reduced by improving the door seals
for the cab and engine compartments.
. An insulated diesel engine compartment with sound-damping material also reduces
noise.
2
3
Wide, Comfortable Operating Space
Steel Cover Sunroof
Dial Type Engine Speed Switch and

Key Switch
Operating Environment
OPERATING ENVIRONMENT 06 /
Wide, Comfortable Operating Space

All the controls are designed and positioned according to the latest ergonomic
research.
Reinforced pillars have also been added for greater cab rigidity.
07
Remote Radio Control and

Deluxe Cassette
Raise-up Wiper and Cabin Lights

Wide Cab with Excellent Visibility
The cab is roomy and ergonomically
designed with low noise level and good
visibility.
A full view front window and large rear
and side windows provide excellent
visibility in all directions.
Highly Sensitive Joystick and

Easy Entrance
New joystick grips for precise control
have been equipped with double
switches.
(Left: Power boost / One touch
deceleration, Right: Horn/Optional)
Raise-up wiper has enhanced for the

better front view. Cabin Lights enhances
safety by brightly lighting the
surroundings during night work(optional)
Easy-to-Reach Control Panels

Switches and other essential controls are
located near the operator.
This helps keep operator movement to a
minimum, enhancing control with less
operator fatigue.
The best working conditions in a pleasant environment.

C
Minimization of Shock and Vibration

through Cab Mounting System
Improved Intelligent Display
CA
The application of Viscous Mounting to the

cabin support provides the operator with a
much improved ride.
The operator work efficiency will increase as
the shock and noise level in the cabin
decreases.
Instrument Panel is installed in front of

RH console box.
It is easy to check all critical systems
with easy-to-read indicators.
Smooth Travel Pedal

and Foot Rests
Rear Emergency Exit Window

Rear Exit Window is designed with easy
exit for
operator's safety.
Storage box and Cup Holder

An Additional storage box and cup holder
are located behind operators seat, and it
keeps food and beverages cool or hot.
Centralized control panel

Horn button
Option button
Remote Radio control
Travel lever
Cluster
One touch decel button
Hour meter
Travel pedal
Fully adjustable suspension seat
Safety lever
Power boost button
Joystick control lever

Air Conditioner and Heater controller
Advanced Hydraulic System
Increased Higher Performance
ADVANCED CAPO SYSTEM

NEW MODE CONTROL SYSTEM
08 /
CUMMINS QSM11-C Engine
Strong and Stable Lower Frame
The six cylinders, turbo-charged, 4 cycle,

Charger air cooled engine is built for power,
reliability, economy and low emissions.
This engine meets Tier II emissions regulations.
Reinforced box-section frame is all welded, low-stress, high-strength steel.

It guarantees safety and resistance against external impact when driving on rough ground and
working on wet sites through high tensile strength steel panels, with highly durable upper and
lower rollers and track guards.
Long undercarriage incorporates heavy duty excavator style components.
X-leg type center frame is integrally welded for maximum strength and durability.
09
POWER MODE
H mode: High power
S mode: Standard power
WORK MODE
: Heavy duty work
: General work
: Breaker
USER MODE
M mode: Maximum Power
U mode : Memorizing Operators Preferable Power Setting
Automatic Engine Overheat Prevention

If the engine coolant temperature gets too
high, the CPU controller lowers the engine
speed and cools the engine.
Anti Restart System

Advanced CAPO System
Arm Flow Regeneration System
The Advanced CAPO(Computer Aided Power

Optimization) system maintains engine and
mutual pump power at optimum levels. Mode
selections are designed for various work loads
and maintaining high performance while
reducing fuel consumption.
Features such as auto deceleration and power
boost are included in the system.
The system monitors engine speed, coolant
temperature, and hydraulic oil temperature.
Contained within the system are self
diagnostic capabilities which are displayed by
error codes on the cluster.
Arm flow regeneration valve provides smooth

arm-in operation without cavitation.
Boom & Arm Holding System

The Holding valves in the main control valve
prevents the boom & arm from dropping over
an extended period in neutral position.
Auto Deceleration System

When remote-control valves are in neutral
position more than 4 seconds, CPU controller
instructs to reduce engine speed.
This decreases fuel consumption and reduces
cab noise levels.
Self Diagnosis System

The CPU controller diagnoses problems in the
CAPO system caused by electric and hydraulic
malfunctions and displays them on the LCD
monitor of the cluster through error codes.
This controller has the capacity to identify 48
distinct types of errors. As the information
from this device, such as engine rpm, main
pump delivery pressure, battery voltage, hyd.
temperature, and the state of all types of
electric switches, provides the operator with a
much more exact state of machine operating
condition.
This makes the machine easier to
troubleshoot when anything does go wrong.
One Touch Decel System

When the one touch decel switch is pressed,
CPU controller controls the accel actuator to
reduce engine speed to low idle rpm. And then
the one touch decel switch is pressed again,
the engine speed recovers.
Max. Flow Cut-off System

For precise control and finishing work, the
Max. Flow Cut-off System reduces pump flow,
thus allowing smooth operation.
The new system protects the starter from

restarting during engine operation, even if the
operator accidentally turns the start key again.
Power boost control System

When the power boost system is activated,
digging power increases about 10%. It is
especially useful when extra power is
temporarily needed, for instance, when
digging hard earth and rock, or if the bucket
teeth are stopped by a stubborn tree root.
Automatic Warming-up System

After the engine is started, if the engine
coolant temperature is low, the CPU controller
increases the engine speed and automatically
increases the pump flow rate to warm up the
engine more effectively.
Pump Flow Control System

In neutral position: Pump flow is reduced to a
minimum to eliminate power loss.
In operation: Maximum pump flow is delivered
to the actuator to increase the speed. With
movement of the control lever, pump flow is
automatically adjusted and the actuator speed
can be proportionally controlled.
Setting the standard in clean,

efficient power.
The QSM uses advanced electronic controls to
meet the toughest emissions standards
without compromising anything.
Exceptional fuel efficiency, durability,
dependability and the highest power-to-weight
ratio in its class are still trademark QSM
qualities.
Plus, the QSM now runs quieter and cleaner.
The QSM engine comes with powerful
Electronic Control Module (ECM).
Using input from sensors located throughout
the engine, it governs the timing and metering
of fuel to the engine. Fuel is injected into the
power cylinder using Cummins dual-pulse
technology. This injection method helps
reduce noise levels as it increases
responsiveness and improves fuel efficiency.
Track Rail Guide & Adjusters

Durable track rail guides keep track links in place. Track adjustment is made easy with standard
grease cylinder track adjusters and shock absorbing springs. (Full Track Guide : Option)
Reinforced Bucket and Bucket

Linkage
Sealed and adjustable bucket linkage provides
less wear of pins and bushes
as well as silent operation.The design includes
bucket link durability and anti wear
characteristics. Additional reinforcement
plates on cutting edge section. Reinforced
bucket is made with thicker steel and
additional lateral plate.
Powerful and Preciser

Swing Control
Improved shock absorbing
characteristics make stopping a
precise and smooth action
Hydraulic Damper in Travel Pedal

Improved travel control ability & feeling by
shock reducing when starting and stopping.
Reliability & Serviceability
RELIABILITY & SERVICEABILITY 10 /
Full open doors and master key system

provide easy access for servicing.
11
Durability of structure
proven through FEM
(Finite Element Method) analysis
and long term durability test.
Handrails and foot steps are applied for safety
Side Cover with Left & Right Swing Open Type
Easy to maintain engine components
Easy access to vital components gives unrestricted view of

component allows easy maintenance and repair.
The cooling and preheating system are provided for optimum

and immediate operation, guaranteeing longer life for the engine
and hydraulic components.
Servicing of the engine and hydraulics is considerably simplified
due to total accessibility.
Centralized Electric Control Box and

Easy Change Air Cleaner Assembly
Highly efficient Hydraulic Pump

Pump output capacity has been increased.
Large tool box for extra storage

Electric control box and Air cleaner are

centralized in one or the same
compartment for easy service.
Specifications
Backhoe attachment
Engine
Swing system
Model
Cummins QSM11-C
Watercooled, 4 cycle Diesel,
6-Cylinders in line, direct injection,
Turbocharged, Charger air cooled,
Low emission
Type
Rated flywheel horse power
J1995 (gross)
HP(kW)/rpm
SAE
J1349 (net)
627 1/1 (gross)
PS(kW)/rpm
DIN
627 1/1 (net)
Max. torque
kgf.m(lbf.ft)/rpm
Bore x stroke
mm (in)
Piston displacement
cc (in3)
Batteries
Starting motor
Alternator
353 (263) / 1,900

320 (239) / 1,900
358 (263) / 1,900
325 (239) / 1,900
182.5 (1,320) / 1,300
125 (4.92) x 147(5.79)
10,800 (659)
2 x 12V x 200AH
24V, 7.2kw
24V, 50Amp
Hydraulic system
Two speed axial piston motor

with brake valve and parking brake
Axial piston motor with automatic brake

Swing
Relief valve setting
Implement circuits
330 kgf/cm2 (4,690 psi)
Travel
345 kgf/cm2 (4,910 psi)
Power boost (boom, arm, bucket) 360 kgf/cm2 (5,120 psi)
Swing circuit
285 kgf/cm2 (3,770 psi)
Pilot circuit
35 kgf/cm2 (500 psi)
Service valve
Installed
Hydraulic cylinders
Boom: 2-170 115 1,570 mm (6.7 4.5 61.8)
No. of cylinderArm: 1-190 130 1,820 mm (7.5 5.1 71.7)
bore x rod x stroke
Bucket: 1-170 115 1,370 mm (6.7 4.5 53.9)
Drives & Brakes

Drive method
Drive motor
Reduction system
Max. drawbar pull
Max. travel speed(high) / (low)
Gradeability
Parking brake
Axial piston motor

Planetary gear reduction
Grease-bathed
Multi wet disc
10.0 rpm
Fully hydrostatic type

Axial piston motor, in-shoe design
Planetary reduction gear
38,500 kgf (82,000 lbf)
5.2 km/hr (3.3 mph) / 3.3 km/hr (2.0 mph)
35 (70 %)
Multi wet disc
Control
Pilot pressure operated joysticks and pedals with detachable lever provide
almost effortless and fatigueless operation.
Pilot control
Two joysticks with one safety lever

(LH): Swing and arm, (RH): Boom and bucket(ISO)
Traveling and steering

Engine throttle
External Lights
Two levers with pedals

Electric, Dial type
Two lights mounted on the boom one under the battery box
SAE heaped
m3(yd3)
1.38 (1.80)
Capacity m3 (yd3)
Width mm (in)
Coolant & Lubricant capacity

(refilling)
Fuel tank
Engine coolant
Engine oil
Swing device(each)
Final drive(each)
Hydraulic system(including tank)
Hydraulic tank
liter
610
50.0
37.9
5.0
5.0
380
250
US gal
161.2
13.2
10.0
1.3
1.3
100.4
66.1
UK gal
134.2
11.0
8.3
1.1
1.1
83.6
55.0
X-leg type center frame is integrally welded with reinforced box-section

track frames. The undercarriage includes lubricated rollers, idlers, track
adjusters with shock absorbing spring and sprocket, assembled track
chain with triple grouser shoes.
Description
Center frame
Track frame
No. of shoes on each side
No. of carrier roller on each side
No. of track roller on each side
No. of track guard on each side
13
Buckets
Undercarriage
Main pump
Type
Two variable displacement piston pumps
Max. flow
2x380 /min (100.4 US gpm / 83.6 UK gpm)
Gear pump
Sub-pump for pilot circuit
Cross-sensing and fuel saving pump system
Hydraulic motors
Travel
Swing motor
Swing reduction
Swing bearing lubrication
Swing brake
Swing speed
12 /
R500LC-7
X - leg type
Pentagonal box type
53
3
9
2
Operating weight (approximate)
SAE
heaped
CECE
heaped
Without
side cutters
With side
cutters
1.38 (1.80)
1.65 (2.16)
1.84 (2.41)
2.15 (2.81)
2.56 (3.35)
2.79 (3.65)
3.03 (3.96)
3.20 (4.19)
3.60 (4.71)
2.20 (2.88)
1.80 (2.35)
2.20 (2.88)
2.43 (3.18)
3.20 (4.19)
1.20 (1.57)
1.44 (1.88)
1.60 (2.09)
1.85 (2.40)
2.20 (2.90)
2.40 (3.14)
2.60 (3.40)
2.78 (3.64)
3.15 (4.12)
1.80 (2.35)
1.50 (1.96)
1.80 (2.35)
2.10 (2.75)
2.80 (3.66)
1,100 (43.3)
1,350 (53.1)
1,420 (55.9)
1,610 (63.4)
1,870 (73.6)
2,020 (79.5)
2,170 (85.4)
2,030 (79.9)
2,250 (88.6)
1,810 (71.3)
1,560 (61.4)
1,810 (71.3)
1,860 (73.2)
2,080 (81.9)
1,250 (49.2)
1,500 (59.1)
1,570 (61.8)
1,760 (69.3)
2,020 (79.5)
2,170 (85.4)
2,320 (91.3)
2,180 (85.8)
2,400 (94.5)
-
: Standard backhoe bucket /
: Heavy-duty /
1.65 (2.16)
1.84 (2.41)
2.15 (2.81)
Weight
kg(lb)
2.56 (3.35)
Recommendation mm(ft.in)
7,060 (23 2)
Boom
Arm
2.20 (2.88)
1.80 (2.35)
2.20 (2.88)
2.79 (3.65)
3.03 (3.96)
3.20 (4.19)
3.60 (4.71)
2,400
(7 10)
2,900
(9 6)
3,380
(11 1)
4,000
(13 1)
2.43 (3.18)
3.20 (4.19)
6,550 (21 6) 9,000 (29 6)
4,500
(14 9)
2,400
(7 10)
5,850
(19 2)
1,360 (3,000)
1,550 (3,420)
1,590 (3,510)
1,740 (3,840)
1,970 (4,340)
2,100 (4,630)
2,140 (4,720)
2,320 (5,110)
2,460 (5,420)
2,140 (4,720)
2,090 (4,610)
2,190 (4,830)
2,330 (5,140)
2,790 (6,150)
: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less
: Rock bucket-Heavy duty
Backhoe attachment
Boom and arms are of all-welded, low-stress, full-box section design. 7,060mm(23 2), 6,550mm(21 6), 9,000mm(29 6)boom and 2,400mm(7 10), 2,900mm(9 6),
3,380mm(11 1), 4,000mm(13 1), 4,500mm(14 9), 5,850mm(19 2)arms are available. Hyundai Buckets are all-welded, high-strength steel implements.
Operating weight, including 7,060mm (23 2) boom, 3,380mm (11 1)

arm, SAE heaped 2.15m3 (2.81 yd3) backhoe bucket, lubricant, coolant,
full fuel tank, hydraulic tank and the standard equipment.
Major component weight

Upperstructure
Counterweight
Boom (with Arm cylinder)
9,940kg (21,910lb)
10,200kg (22,490lb)
4,180kg (9,220lb)
2,400mm (7 10)
2,900mm (9 6)
4,000mm (13 1)
4,500mm (14 9)
5,850mm (19 2)
3,380mm (11 1)
Operating weight
Shoes
Width mm(in)
600 (24)
700 (28)
Triple
grouser
750 (30)
800 (32)
600 (24)
Double
grouser
700 (28)
Type
Standard equipment
Operating weight Ground pressure

kg(lb)
kgf/cm2(psi)
48,800 (107,580) 0.84 (11.94)
49,340 (108,770) 0.73 (10.38)
49,590 (109,330) 0.69 (9.81)
49,850 (109,900) 0.65 (9.24)
48,800 (107,580) 0.84 (11.94)
49,340 (108,770) 0.73 (10.38)
Digging force
Arm
Bucket
digging
force
Arm
crowd
force
Length
Weight
SAE
ISO
SAE
ISO
mm(ft.in)
kg(lb)
kN
kgf
lbf
kN
kgf
lbf
kN
kgf
lbf
kN
kgf
lbf
2,400 (7 10)
2,370 (5220)
2,900 (9 6)
2,540 (5600)
246.2 [268.5]
25,100 [27,380]
55,340 [60,370]
246.2 [268.5]
25,100 [27,380]
55,340 [60,370]
292.2 [318.8]
29,800 [32,510]
65,700 [71,670]
4,000 (13 1)
2,670 (5890)
4,500 (14 9)
2,860 (6310)
246.2 [268.5]
25,100 [27,380]
55,340 [60,370]
246.2 [268.5]
25,100 [27,380]
55,340 [60,370]
246.2 [268.5]
25,100 [27,380]
55,340 [60,370]
292.2 [318.8]
29,800 [32,510]
65,700 [71,670]
292.2 [318.8]
29,800 [32,510]
65,700 [71,670]
292.2 [318.8]
29,800 [32,510]
65,700 [71,670]
292.2 [318.8]
29,800 [32,510]
65,700 [71,670]
273.6 [298.5]
27,900 [30,440]
61,510 [67,100]
222.6 [242.9]
22,700 [24,760]
50,040 [54,590]
186.3 [203.3]
19,000 [20,730]
41,890 [45,700]
169.7 [185.1]
17,300 [18,870]
38,140 [41,610]
157.9 [172.2]
16,100 [17,560]
35,490 [38,720]
291.3 [317.7]
29,700 [32,400]
65,480 [71,430]
235.4 [256.8]
24,000 [26,180]
52,910 [57,720]
196.1 [214.0]
20,000 [21,820]
44,090 [48,100]
177.5 [193.6]
18,100 [19,750]
39,900 [43,530]
164.8 [179.7]
16,800 [18,330]
37,040 [40,410]
Note : Arm weight including bucket cylinder and linkage.
Standard arm
3,380 (11 1)
2,380 (5250)
Remark
[
]:
Power Boost
Dimensions & Working ranges
Lifting Capacities
Dimensions
Lifting capacities
Rating over-front
Rating over-side or 360 degree
. Boom: 6.55 m (21 6) . Arm: 2.40 m (7 10) . Bucket: 2.15 m3 SAE heaped . Shoe : 600mm(24) triple grouser & 10,200kg(22,490 lb) CWT
Load Point
height
m(ft)
mm (ft . in)
Description
R500LC-7
4,470 (14 8)
A Tumbler distance
5,460(17 11)
B Overall length of crawler
1,500 (4 11)
C Ground clearance of CWT
3,720 (12 2)
D Tail swing radius
3,665 (12 0)
D Rear-end length
2,980 (9 9)
E Overall width of upperstructure
3,390 (11 2)
F Overall height of cab
770 (2 6)
G Min. ground clearance
H Track gauge(Extended/Retracted) 2,940 (9 8)/2,380 (7 10)
mm (ft . in)
6,550 (21 6) 9,000 (29 6)
7,060 (23 2)
Boom length
Arm length
3,380 4,000 4,500

2,400
2,400 2,900
(7 10) (9 6) (11 1) (13 1) (14 9) (7 10)
5,850
(19 2)
Overall length
12,240 12,160 11,980 12,020 11,980 11,740

(40 2) (39 11) (39 4) (39 5) (39 4) (38 6)
13,770
(45 2)
Overall height
of boom
4,100
3,970 3,880 3,670 4,100 4,540
(13 0) (12 9) (12 0) (13 5) (14 11) (13 5)
5,190
(17 0)
Track shoe width
600
(24)
700
(28)
750
(30)
800
(32)
900
(36)
3,340
(10 11)
3,440
(11 3)
3,490
(11 5)
3,540
(11 7)
3,640
(11 11)
Extended
3,540
(117)
3,640
(11 11)
3,690
(12 1)
3,740
(12 3)
3,840
(12 7)
Retracted
2,980
(9 9)
3,080
(10 1)
3,130
(10 3)
3,180
(10 5)
3,280
(10 9)
Overall width
Standard Equipment
Working ranges
mm (ft . in)
Boom length
7,060(23 2)
6,550 (21 6) 9,000 (29 6)
Arm length
2,400 2,900
3,380 4,000 4,500
2,400
(7 10) (9 6) (11 1) (13 1) (14 9) (7 10)
5,850
(19 2)
Max.
digging reach
11,160 11,550 12,100 12,660 13,150 10,610

(36 7) (37 11) (39 8) (41 6) (43 2) (34 10)
16,280
(53 5)
Max. digging
reach on ground
16,100
10,900 11,310 11,870 12,440 12,930 10,340
(35 9) (37 1) (38 11) (40 10) (42 5) (33 11) (52 10)
Max. digging
depth
6,150
6,630 7,130 7,610 8,230 8,730
(21 9) (23 5) (24 12) (27 0) (28 8) (20 2)
11,380
(37 4)
6,450 6,970 7,460 8,100 8,610

(21 2) (22 10) (24 6) (26 7) (28 3)
5,970
(19 7)
11,280
(37 0)
5,250
Max. vertical wall 5,810 5,670 6,380 7,120 7,510
digging depth
(19 1) (18 7) (20 11) (23 4) (24 8) (17 3)
10,070
(33 0)
Max. digging
height
10,690 10,640 11,120 11,330 11,580 10,300

(35 1) (34 11) (36 6) (37 2) (37 12) (33 10)
13,930
(45 8)
Max. dumping
height
7,270 7,330 7,750 7,960 8,210

6,900
(23 10) (24 1) (25 5) (26 1) (26 11) (22 8)
10,530
(34 7)
Min. swing radius
4,640
5,090 4,900 4,780 4,830 4,870
(16 8) (16 1) (15 8) (15 10) (15 12) (15 3)
5,940
(19 6)
Max. digging
B
depth (8' level)
Standard Equipment
7.5m
25.0ft
6.0m
20.0ft
4.5m
15.0ft
3.0m
10.0ft
1.5m
5.0ft
Ground
Line
-1.5m
-5.0ft
-3.0m
-10.0ft
-4.5m
-15.0ft
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
Load radius
4.5m (15.0ft)
6.0m (20.0ft)
At max. reach
Capacity
Reach
7.5m (25.0ft)
m (ft)
*26210
*57780
*22070
*48660
*26210
*57780
*22070
*48660
*19750
*43540
*19750
*43540
*23620
*52070
*21590
*47600
*18190
*40100
*12430
*27400
19860
43780
19950
43980
*18190
*40100
*12430
*27400
*13190
*29080
*14810
*32650
*16480
*36330
*17540
*38670
*17620
*38850
*16590
*36570
*14140
*31170
*13190
*29080
14470
31900
13650
30090
13010
28680
12670
27930
12600
27780
12780
28180
*11580
*25530
*12280
*27070
*13090
*28860
*13650
*30090
*13660
*30120
*12760
*28130
10370
22860
10050
22160
9650
21270
9290
20480
9070
20000
9020
19890
*10040
*22130
*9900
*21830
*9900
*21830
9840
21690
9870
21760
*9950
*21940
*9650
*21270
*8660
*19090
8720
19220
7260
16010
6490
14310
6140
13540
6120
13490
6460
14240
7310
16120
*8660
*19090
8.44
(27.7)
9.23
(30.3)
9.69
(31.8)
9.86
(32.3)
9.77
(32.1)
9.41
(30.9)
8.72
(28.6)
7.62
(25.0)
Load Point
height
m(ft)
7.5m
25.0ft
6.0m
20.0ft
4.5m
15.0ft
3.0m
10.0ft
1.5m
5.0ft
Ground
Line
-1.5m
-5.0ft
-3.0m
-10.0ft
-4.5m
-15.0ft
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
4.5m (15.0ft)
Load radius
6.0m (20.0ft)
7.5m (25.0ft)
9.0m (30.0ft)
At max. reach
Capacity
Reach
m (ft)
*20940
*46160
*20940
*46160
*20730
*45700
*17990
*39660
*13590
*29960
19330
42620
*17990
*39660
*13590
*29960
*12670
*27930
*14410
*31770
*16080
*35450
*17070
*37630
*17110
*37720
*16250
*35830
*14340
*31610
*10660
*23500
*12670
*27930
14010
30890
13100
28880
12460
27470
12160
26810
12130
26740
12310
27140
*10660
*23500
*10410
*22950
*10880
*23990
*11710
*25820
*12580
*27730
*13200
*29100
*13310
*29340
*12710
*28020
*10990
*24230
*10410
*22950
10210
22510
9790
21580
9330
20570
8950
19730
8720
19220
8660
19090
8810
19420
*10160
*22400
*10530
*23210
*10770
*23740
7140
15740
6930
15280
6730
14840
*9050
*19950
*8960
*19750
*8960
*19750
8810
19420
8820
19440
*9080
*20020
*8900
*19620
*8260
*18210
7490
16510
6330
13960
5700
12570
5400
11900
5380
11860
5650
12460
6320
13930
7720
17020
9.09
(29.8)
9.83
(32.3)
10.26
(33.7)
10.42
(34.2)
10.33
(33.9)
9.99
(32.8)
9.36
(30.7)
8.36
(27.4)
Load Point
height
m(ft)
7.5m
25.0ft
6.0m
20.0ft
4.5m
15.0ft
3.0m
10.0ft
1.5m
5.0ft
Ground
Line
-1.5m
-5.0ft
-3.0m
-10.0ft
-4.5m
-15.0ft
NOTES
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
4.5m (15.0ft)
Load radius
6.0m (20.0ft)
7.5m (25.0ft)
9.0m (30.0ft)
At max. reach
Capacity
Reach
m (ft)
*21420
*47220
*24420
*53840
*19000
*41890
*21420
*47220
*24420
*53840
*19000
*41890
*18360
*40480
*22060
*48630
*23550
*51920
*23160
*51060
*21740
*47930
*19320
*42590
*15480
*34130
*18360
*40480
20430
45040
19290
42530
19000
41890
19060
42020
*19320
*42590
*15480
*34130
*13580
*29940
*15410
*33970
*16670
*36750
*17060
*37610
*16540
*36460
*15030
*33140
*12100
*26680
1. Lifting capacity are based on SAE J1097, ISO 10567.

2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
*13580
*29940
13270
29260
12520
27600
12110
26700
11980
26410
12090
26650
*12100
*26680
*9660
*21300
*10230
*22550
*11140
*24560
*12120
*26720
*12880
*28400
*13190
*29080
*12870
*28370
*11640
*25660
*9660
*21300
*10230
*22550
9890
21800
9380
20680
8950
19730
8650
19070
8540
18830
8600
18960
*9690
*21360
*10180
*22440
*10550
*23260
*10620
*23410
7190
15850
6930
15280
6690
14750
6530
14400
*8360
*18430
*8320
*18340
*8380
*18470
8260
18210
8250
18190
8620
19000
*8630
*19030
*8300
*18300
*7100
*15650
6890
15190
5880
12960
5310
11710
5030
11090
5000
11020
5210
11490
5770
12720
6900
15210
*7100
*15650
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
9.55
(31.3)
10.25
(33.6)
10.66
(35.0)
10.81
(35.5)
10.73
(35.2)
10.40
(34.1)
9.80
(32.2)
8.86
(29.1)
7.42
(24.3)
Lifting Capacities
LIFTING CAPACITIES
Lifting capacities
Rating over-front
17
Load Point
height
m(ft)
7.5m
25.0ft
6.0m
20.0ft
4.5m
15.0ft
3.0m
10.0ft
1.5m
5.0ft
Ground
Line
-1.5m
-5.0ft
-3.0m
-10.0ft
-4.5m
-15.0ft
-6.0m
-20.0ft
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
4.5m (15.0ft)
Load radius
6.0m (20.0ft)
7.5m (25.0ft)
9.0m (30.0ft)
10.5m (35.0ft)
*14070
*31020
*17560
*38710
*22030
*48570
*27690
*61050
*21410
*47200
*14070
*31020
*17560
*38710
*22030
*48570
*27690
*61050
*21410
*47200
*17760
*39150
*21260
*46870
*23000
*50710
*23140
*51010
*22050
*48610
*19730
*43500
*15800
*34830
*17760
*39150
20360
44890
19220
42370
18750
41340
18680
41180
18900
41670
*15800
*34830
*12980
*28620
*14940
*32940
*16240
*35800
*16700
*36820
*16270
*35870
*14820
*32670
*11940
*26320
*12980
*28620
12950
28550
12220
26940
11800
26010
11650
25680
11740
25880
*11940
*26320
At max. reach
Capacity
Reach
4980
*6590
*6900 *6900
*14530 10980
*15210 *15210
4370
*7620 *7620 *5070 *5070 *6610
9630
*16800 *16800 *11180 *11180 *14570
4000
5470 *6680
7400
*6810
*9230 *8220
8820
*20350 *18120 16310 *15010 12060 *14730
3800
6460
5270
7050
9670
*7920
*8940
8380
21320 *19710 15540 *17460 11620 14240
3760
6430
5070
6710
9100
*8270
*9620
8290
20060 *21210 14790 *18230 11180 14180
3860
6620
4910
6420
8630 *10120
*8270
8510
19030 *22310 14150 *18230 10820 14590
7080
4160
4810
6230
8330 *10280
*7920
9170
18360 *22660 13730 *17460 10600 15610
6160
4720
8210
*7100
*9900
18100 *21830 13580
*15650 10410
6260
5780
8260
*6850
*8530
18210 *18810 13800
*15100 12740
8560
*5940 *5940
18870
*13100 *13100
11.35
(37.2)
11.93
(39.1)
12.27
(40.3)
12.40
(40.7)
12.33
(40.5)
12.06
(39.6)
11.55
(37.9)
10.79
(35.4)
9.69
(31.8)
8.10
(26.6)
Load Point
height
m(ft)
10.0m
35.0ft
8.0m
25.0ft
6.0m
20.0ft
4.0m
15.0ft
2.0m
5.0ft
Ground
Line
-2.0m
-5.0ft
-4.0m
-15.0ft
-6.0m
-20.0ft
-8.0m
-25.0ft
NOTES
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
*11700
*25790
*15000
*33070
*18860
*41580
*17900
*39460
*11700
*25790
*15000
*33070
*18860
*41580
*17900
*39460
5.0m (15.0ft)
*16870 16620
*37190 36640
*17270 15020
*38070 33110
*18210 14440
*40150 31830
*17860 14390
*39370 31720
*15810 14660
*34860 32320
*12440 *12440
*27430 *27430
Load radius
7.0m (25.0ft)
9.0m (30.0ft)
*9040 *9040 *7050

*19930 *19930 *15540
9970
*8070
*10900
*24030 21980 *17790
9020
*8880
*12210
*26920 19890 *19580
8480
*9290
*12720
*28040 18700 *20480
8290
*9180
*12450
*27450 18280 *20240
8360
*8400
*11330
*24980 18430 *18520
8680
*6540
*9090
*20040 19140 *14420

11.0m (35.0ft)
13.0m (45.0ft)
*4910 *4910 *2810

*10820 *10820 *6190
*5320 *5320 *4370
*11730 *11730 *9630
4990
*5110
*7050 *5880
*15540 *12960 11000 *11270
4600
6630
*5410
*6460
14620 *14240 10140 *11930
5550
4250
6060
*6930
12240
9370
13360 *15280
5400
4010
5680
*7160
11900
8840
12520 *15790
3890 *4190
5500
*7000
8580 *9240
12130 *15430
3940
5530
*6190
8690
12190 *13650
5780
12740
*2810
*6190
3650
8050
3450
7610
3230
7120
3030
6680
2890
6370
2870
6330
Rating over-front
Load Point
height
m(ft)
7.5m
25.0ft
6.0m
20.0ft
4.5m
15.0ft
3.0m
10.0ft
1.5m
5.0ft
Ground
Line
-1.5m
-5.0ft
-3.0m
-10.0ft
-4.5m
-15.0ft
-6.0m
-20.0ft
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
Load radius
6.0m (20.0ft)
4.5m (15.0ft)
7.5m (25.0ft)
At max. reach
Capacity
Reach
9.0m (30.0ft)
m (ft)
*13300
*29320
*19310
*42570
*25700
*56660
*22360
*49300
*13300
*29320
*19310
*42570
*25700
*56660
*22360
*49300
*17090
*37680
*21120
*46560
*23430
*51650
*23730
*52320
*22730
*50110
*20660
*45550
*17250
*38030
*11650
*25680
*17090
*37680
*21120
*46560
19850
43760
19310
42570
19220
42370
19390
42750
*17250
*38030
*11650
*25680
*12920
*28480
*14910
*32870
*16450
*36270
*17140
*37790
*16930
*37320
*15760
*34740
*13340
*29410
*12920
*28480
13590
29960
12800
28220
12310
27140
12100
26680
12120
26720
12360
27250
*9730
*21450
*10720
*23630
*11800
*26010
*12720
*28040
*13220
*29150
*13120
*28920
*12230
*26960
*9970
*21980
*9730
*21450
10070
22200
9560
21080
9100
20060
8770
19330
8600
18960
8600
18960
8820
19440
*8620
*19000
*9390
*20700
*9960
*21960
*10450
*23040
*10670
*23520
*10420
*22970
7560
16670
7330
16160
7060
15560
6790
14970
6590
14530
6500
14330
6190
13650
5370
11840
4890
10780
4660
10270
4620
10190
4800
10580
5250
11570
6130
13510
*7110
*15670
*7870
*17350
*7850
*17310
*7900
*17420
7660
16890
7650
16870
7950
17530
*8140
*17950
*7910
*17440
*7110
*15670
10.18
(33.4)
10.83
(35.5)
11.21
(36.8)
11.36
(37.3)
11.28
(37.0)
10.97
(36.0)
10.41
(34.2)
9.54
(31.3)
8.25
(27.1)
At max. reach
Capacity
Reach
*4350
*9590
*4290
*9460
*4290
*9460
4200
9260
4080
8990
4140
9130
4390
9680
*4530
*9990
*4380
*9660
*3820
*8420
Lifting capacities
m (ft)
*9230
*20350
*10470
*23080
*11630
*25640
*12470
*27490
*12830
*28290
*12550
*27670
*11390
*25110
*8660
*19090
LIFTING CAPACITIES
3530
7780
2860
6310
2450
5400
2200
4850
2100
4630
2110
4650
2270
5000
2620
5780
3290
7250
*3820
*8420
m (ft)
Load Point
height
m(ft)
13.66
(44.8)
14.63
(48.0)
15.25
(50.0)
15.57
(51.1)
15.60
(51.2)
15.35
(50.4)
14.80
(48.6)
13.91
(45.6)
12.61
(41.4)
10.72
(35.2)
7.5m
25.0ft
6.0m
20.0ft
4.5m
15.0ft
3.0m
10.0ft
1.5m
50ft
Ground
Line
-1.5m
-5.0ft
-3.0m
-10.0ft
-4.5m
-15.0ft
-6.0m
-20.0ft
NOTES
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.0m (10.0ft)
4.5m (15.0ft)
Load radius
6.0m (20.0ft)
7.5m (25.0ft)
9.0m (30.0ft)
10.5m (35.0ft)
At max. reach
Capacity
Reach
m (ft)
*13920
*30690
*18330
*40410
*23530
*51870
*25640
*56530
*18550
*40900
*13920
*30690
*18330
*40410
*23530
*51870
*25640
*56530
*18550
*40900
*19310
*42570
*22370
*49320
*23510
*51830
*23140
*51010
*21600
*47620
*18800
*41450
*14200
*31310
*19310
*42570
20130
44380
19280
42510
18990
41870
19040
41980
*18800
*41450
*14200
*31310
*13880 13790
*30600 30400
*15680 12890
*34570 28420
*16730 12270
*36880 27050
*16900 11960
*37260 26370
*16150 11890
*35600 26210
*14300 12050
*31530 26570
*10730 *10730
*23660 *23660

*9910
*21850
*11090
*24450
*12150
*26790
*12860
*28350
*13030
*28730
*12500
*27560
*10940
*24120
*6580 *6580
*14510 *14510
7640
*8200
*18080 16840
7370
*5530
*9910 *8760
*21850 *19310 16250 *12190
7060
9620
*7170
*9420
21210 *20770 15560 *15810
6750
9100 *10030
*7960
20060 *22110 14880 *17550
6510
8710 *10410
*7220
19200 *22950 14350 *15920
6360
8470 *10410
18670 *22950 14020
6340
8400
*9760
18520 *21520 13980
8520
18780
5470
12060
5310
11710
5140
11330
5010
11050
*7130
*15720
*7150
*15760
*7220
*15920
7000
15430
6980
15390
7210
15900
*7610
*16780
*7540
*16620
*7120
*15700
5520
12170
4820
10630
4410
9720
4190
9240
4150
9150
4290
9460
4640
10230
5340
11770
6670
14700
10.81
(35.5)
11.42
(37.5)
11.78
(38.6)
11.92
(39.1)
11.85
(38.9)
11.56
(37.9)
11.03
(36.2)
10.21
(33.5)
9.04
(29.7)
14 / 15 /
16

R500LC 7

Uploaded by

Copyright:

Available Formats

R500LC 7

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

R500LC 7

Uploaded by

Copyright:

Available Formats

www.hyundai-ce.

ISO standard cab

Sun visor for cabin inside

Heater (7500kcal/hr, 30000BTU/hr)

Various optional Buckets (SAE heaped)

Photo may include optional equipment.

HYUNDAI CONSTRUCTION EQUIPMENT 02 /

Built for Maximum Power,

NEW 7 SERIES ROBEX 500LC-7

Technology in Cab Design

TECHNOLOGY IN CAB DESIGN 04 /

Operators Comfort is Foremost.

Comfortable Operator Environment

Low noise design

Wide, Comfortable Operating Space

Steel Cover Sunroof

Dial Type Engine Speed Switch and

NEW 7 SERIES ROBEX 500LC-7

Wide, Comfortable Operating Space

Remote Radio Control and

Raise-up Wiper and Cabin Lights

Highly Sensitive Joystick and

Raise-up wiper has enhanced for the

Easy-to-Reach Control Panels

The best working conditions in a pleasant environment.

Minimization of Shock and Vibration

Improved Intelligent Display

The application of Viscous Mounting to the

Instrument Panel is installed in front of

Smooth Travel Pedal

Rear Emergency Exit Window

Storage box and Cup Holder

Centralized control panel

Joystick control lever

NEW 7 SERIES ROBEX 500LC-7

Advanced Hydraulic System

Increased Higher Performance

ADVANCED CAPO SYSTEM

CUMMINS QSM11-C Engine

Strong and Stable Lower Frame

The six cylinders, turbo-charged, 4 cycle,

Reinforced box-section frame is all welded, low-stress, high-strength steel.

S mode: Standard power

Automatic Engine Overheat Prevention

Anti Restart System

Arm Flow Regeneration System

The Advanced CAPO(Computer Aided Power

Arm flow regeneration valve provides smooth

Boom & Arm Holding System

Auto Deceleration System

Self Diagnosis System

One Touch Decel System

Max. Flow Cut-off System

The new system protects the starter from

Power boost control System

Automatic Warming-up System

Pump Flow Control System

Setting the standard in clean,

Track Rail Guide & Adjusters

9040 9040 *7050

4910 4910 *2810