Beamsaet 3
Beamsaet 3
1. A cantilever beam is 6 m long and has a point load of 20 kN at the free end. The flexural stiffness is
110 MNm2. Calculate the slope and deflection at the free end.
y = FL3/3EI = - (20 000 x 63)/ (3 x 110 x 106) = - 0.013 m or 13 mm down.
dy/dx = FL2/2EI = (20 000 x 62)/(2 x 110 x 106) = 0.00327
2. A cantilever beam is 5 m long and has a point load of 50 kN at the free end. The deflection at the free
end is 3 mm downwards. The modulus of elasticity is 205 GPa. The beam has a solid rectangular
section with a depth 3 times the width. (D= 3B). Determine
i. the flexural stiffness.
ii. the dimensions of the section.
y = -FL3/3EI = -0.003 = - (50 000 x 53)/ (3 EI)
EI = (0.003 x 3)/ (50 000 x 53) = 694.4 x 106 Nm2
I = 694.4 x 106 /E = 694.4 x 106 /205 x 109 = 0.003387 m4
I = BD3/12 and substitute D = 3B
I = 0.003387 = 27B4/12
B4 = 0.001505
B = 0.197 m D = 0.591 m
BEAMS TUTORIAL 3 SAE 2
1. A cantilever is 6 m long with a u.d.l. of 1 kN/m. The flexural stiffness is 100 MNm2. Calculate the
slope and deflection at the free end.
y = -wL4/8EI = (-1000 x 64)/(8 x 100 x 106) = -0.00162 m or 1.62 mm down
dy/dx = wL3/6EI = (20 000 x 63)/(6 x 110 x 106) = 360 x 10-6
2. A cantilever beam is 5 m long and carries a u.d.l. of 8 kN/m. The modulus of elasticity is 205 GPa and
beam is a solid circular section. Calculate
i. the flexural stiffness which limits the deflection to 3 mm at the free end.
ii. the diameter of the beam. (379 mm).
EI = wL4/8y = 8000 x 54/(8 x 0.003) = 208.3 x 106 Nm2
I = 208.3 x 106/ 205 x 109 = 0.0010161 m4
I = 0.0010161 = D4/64
D4 = (0.0010161x 64)/ = 0.0207
D = 0.379 m
1. A simply supported beam is 4 m long and has a load of 200 kN at the middle. The flexural stiffness is
300 MNm2. Calculate the slope at the ends and the deflection at the middle.
y = -FL3/48EI = - (200 x 103 x 43)/ (48 x 300 x 106) = -0.00089 m or 0.89 mm down
dy/dx = FL2/16EI = (200 x 103 x 42)/(16 x 300 x 106) = 0.000667
2. A simply supported beam is made from a hollow tube 80 mm outer diameter and 40 mm inner
diameter. It is simply supported over a span of 6 m. A point load of 900 N is placed at the middle.
Find the deflection at the middle if E=200 GPa.
I = (0.084 0.044) /64 = 1.885 x 10-6 m4
y = -FL3/48EI = - (900 x 63)/ (48 x 200 x 109 x 1.885 x 10-6) = -0.0107 m or 10.7 mm down
3. Find the flexural stiffness of a simply supported beam which limits the deflection to 1 mm at the
middle. The span is 2 m and the point load is 200 kN at the middle.
EI = FL3/48y = (200x 103 x 23)/(48 x 0.001) = 33.3 x 106 Nm2
BEAMS TUTORIAL 3 SAE 4
1. A simply supported beam is 4 m long with a u.d.l. of 200 N/m. The flexural stiffness is 100 MNm2.
Calculate the slope at the ends and the deflection at the middle.
y = -5wL4/384 EI = -(5 x 200 x 44)/(384 x 100 x 106) = -6.67 x 10-6 m
dy/dx = wL3/24 EI =(200 x 43)/(24 x 100 x 106) = 5.33 x 10-6
2. A simply supported beam is made from a hollow tube 80 mm outer diameter and 40 mm inner
diameter. It is simply supported over a span of 6 m. The density of the metal is 7300 kg/m3. E=200
GPa. Calculate the deflection at the middle due to the weight of the beam.
I = (0.084 0.044) /64 = 1.885 x 10-6 m4
A = (0.082 0.042) /4 = 3.77 x 10-3 m2
Volume/length = 3.77 x 10-3 m3/m
Mass/length = 3.77 x 10-3 x 7300 = 27.52 kg/m
w = 27.52x 9.81 = 269.97 N/m
y = -5wL4/384EI = - (5 x 269.97 x 64)/ (384 x 200 x 109 x 1.885 x 10-6) = -0.012 m or 12 mm down
3. Find the flexural stiffness of a simply supported beam which limits the deflection to 1 mm at the
middle. The span is 2 m and the u.d.l. is 400 N/m.
EI = -5wL4/384 y = (5x 400x 24)/(384 x 0.001) = 83300 Nm2
1. Find the deflection at the centre of the beam shown. The flexural stiffness is 20 MNm2.
2. Find the deflection of the beam shown at the centre position. The flexural stiffness is 18 MNm2.
3. Find value of E I which limits the deflection of the beam shown at the end to 2 mm.
4. A cantilever is 5m long and has a flexural stiffness of 25 MNm2. It carries a point load of 1.5 kN at
the free end and a u.d.l. of 500 N/m along its entire length. Calculate the deflection and slope at the
free end.
This may be solved using standard equations.
y = -FL3/3EI wL4/8EI = -1500(5)3/ (3 x 25 x 106) 500(5)4/(8 x 25 x 106) = - 0.0040625 m
dy/dx = FL2/2EI + wL3/6EI = 1500(5)2/(2 x 25 x 106) + 500(5)3/(6 x 25 x 106) = 1.1667 x 10-3
5. A cantilever beam is 6 m long and has a point load of 800 N at the free end and a u.d.l. of 400 N/m
along its entire length. Calculate the flexural stiffness if the deflection is 1.5 mm downwards at the
free end.
This may be solved using standard equations.
y = - 0.0015 = -FL3/3EI wL4/8EI = -(1/EI)[800(6)3/ 3 + 400(6)4/8
y = - 0.0015 = -122.4 x 103/EI
EI = 122.4 x 103/0.0015 = 81.6 x 106 Nm2
6. A simply supported beam is 6 m long and has a flexural stiffness of 3 MNm2. It carries a point load of
800 N at the middle and a u.d.l. of 400 N/m along its entire length. Calculate the slope at the ends and
the deflection at the middle.
y = -FL3/48EI 5wL4/384EI = -800(6)3/ (48 x 3 x 106) 5(400)(6)4/(384 x 3 x 106) = - 0.00345 m
dy/dx = FL2/16EI + wL3/24EI = 800(6)2/(16 x 3 x 106) + 400(6)3/(24 x 3 x 106) = 1.8 x 10-3
7. Calculate the flexural stiffness of a simply supported beam which will limit the deflection to 2 mm at
the middle. The beam is 5 m long and has a point load of 1.2 kN at the middle and a u.d.l. of 600 N/m
along its entire length.
The beam has a solid rectangular section twice as deep as it is wide. Given the modulus of elasticity is
120 GPa, calculate the dimensions of the section.
y = -FL3/48EI 5wL4/384EI = -1200(5)3/ (48EI) 5(600)(5)4/(384EI) = - 0.002 m
EI = 8000/0.002 = 4 x 106 Nm2
I = BD3/12 = B(2B)3/12 = 8B4/12
B = 0.085 m D = 0.168 m
d2y
x2
[
]
=
=
+ MA
M
R
x
80
x
4
5
x
A
2
dx 2
Integrate
EI
[x 4] 2
dy
x2
x3
= RA
80
5
+ MAx + A
dx
2
2
6
From the boundary condition x = 0, dy/dx = 0 it follows that A = 0
Put in the other boundary condition x = 6, dy/dx = 0
Integrate
[x 4 ] 3
x3
x4
x2
EIy = R A
80
5
+ MA
+ B
6
6
24
2
From the boundary condition x=0, y = 0 it follows that B = 0
Put in the other boundary condition x = 6, dy/dx = 0 and y = 0
[6 4] 2
63
62
dy
= 0 = RA
80
5
+ MA 6
EI
6
2
2
dx
0 = 18R A 160 180 + 6M A
EI
[6 4] 3
63
64
62
80
5
+ MA
6
6
24
2
106.7 270 + 18M A
EIy = 0 = R A
0 = 36R A
44
42
+ MA
24
2
4
4
42
50.55x10 3 x
24
2
3
404.4 x 10 = 76.51 x 103
d2y
x2
EI 2 = M x = R A x 5[x 1] 6[x 2] - 5
+ MA
2
dx
Integrate
[x 1] 2
[x 2 ] 2
dy
x2
x3
EI
= RA
5
6
5
+ MAx + A
dx
2
2
2
6
From the boundary condition x=0, dy/dx = 0 it follows that A = 0
Put in the other boundary condition x = 6, dy/dx = 0
Integrate
[x 1] 3
[x 2 ] 3
x3
x4
x2
EIy = R A
5
6
5
+ MA
+ B
6
6
6
24
2
From the boundary condition x = 0, y = 0 it follows that B = 0
Put in the other boundary condition x = 3, dy/dx = 0 and y = 0
[3 1] 2
[3 2] 2
33
32
dy
= 0 = RA
5
6
5
+ 3M A
EI
6
2
2
2
dx
0 = 4.5R A 10 3 - 22.5 + 3M A
0 = 4.5R A 35.5 + 3M A ................(1)
[3 1] 3
[3 2] 3
32
34
33
5
6
5
+ MA
2
24
6
6
6
6.67 1 - 16.875 + 4.5M A
EIy = 0 = R A
0 = 4.5R A