Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Firewall Cable Penetration Location: Van'S Aircraft, Inc

    Uploaded by

    Mark Evan Salutin
    This document provides instructions for installing and routing a push pull cable through an engine mount ring and friction comb assembly. It instructs the user to add three cushioned clamps to the engine mount ring and route the cable through each, install a friction comb between the lower clamps with the cable woven through it, pull the cable handle out of the sheath, and trim the cable sheath to the specified dimensions.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Firewall Cable Penetration Location: Van'S Aircraft, Inc

    Uploaded by

    Mark Evan Salutin
    20 views1 page
    This document provides instructions for installing and routing a push pull cable through an engine mount ring and friction comb assembly. It instructs the user to add three cushioned clamps to the engine mount ring and route the cable through each, install a friction comb between the lower clamps with the cable woven through it, pull the cable handle out of the sheath, and trim the cable sheath to the specified dimensions.

    Original Description:

    RV-12

    Original Title

    49-09

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for installing and routing a push pull cable through an engine mount ring and friction comb assembly. It instructs the user to add three cushioned clamps to the engine mount ring and route the cable through each, install a friction comb between the lower clamps with the cable woven through it, pull the cable handle out of the sheath, and trim the cable sheath to the specified dimensions.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views1 page

    Firewall Cable Penetration Location: Van'S Aircraft, Inc

    Uploaded by

    Mark Evan Salutin
    This document provides instructions for installing and routing a push pull cable through an engine mount ring and friction comb assembly. It instructs the user to add three cushioned clamps to the engine mount ring and route the cable through each, install a friction comb between the lower clamps with the cable woven through it, pull the cable handle out of the sheath, and trim the cable sheath to the specified dimensions.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    VAN'S AIRCRAFT, INC.

    Step 1: Add three sets of cushioned clamps to the WD-1220 Engine Mount Ring routing the CT A-740 BLACK Push Pull Cable through each. See Figure 1. Step 2: Install the FF-00002 Friction Comb between the lower set of cushioned clamps by weaving the CT A-740 BLACK Push Pull Cable through the notches in the friction comb as shown in Figure 1. Step 3: Pull the handle and attached wire of the CT A-740 BLACK Push Pull Cable completely out of the cable sheath. Step 4: Using the dimensions in Figure 1 trim the CT A-740 BLACK Push Pull Cable sheath.

    FIREWALL CABLE PENETRATION LOCATION

    CUSHIONED CLAMP CT A-740 BLACK

    2 27/32

    MS21919WCH8 (ENGINE MOUNT) MS21919WCH3 (CABLE) 3X AN3-3A MS21042-3

    FF-00002

    FIGURE 1: TRIMMING THE PUSH PULL CABLE


    DATE: 02/22/10 REVISION:

    RV-12

    PAGE

    49-09

    You might also like