Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Ck704 - 1W Stereo Amplifier Module: Components

    Uploaded by

    jimrodas
    This module uses a Samsung KA2209 IC to function as a stereo amplifier suitable for portable cassette players and radios. It can operate from 1.8V to 9V, making it suitable for battery use. The circuit is designed to connect the amplifier in a stereo pattern to accept a preamplifier input and power speakers between 1W and 8 ohms. Assembly instructions describe soldering lowest height components like resistors first, then the IC socket and capacitors while ensuring correct polarity of electrolytic capacitors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ck704 - 1W Stereo Amplifier Module: Components

    Uploaded by

    jimrodas
    19 views1 page
    This module uses a Samsung KA2209 IC to function as a stereo amplifier suitable for portable cassette players and radios. It can operate from 1.8V to 9V, making it suitable for battery use. The circuit is designed to connect the amplifier in a stereo pattern to accept a preamplifier input and power speakers between 1W and 8 ohms. Assembly instructions describe soldering lowest height components like resistors first, then the IC socket and capacitors while ensuring correct polarity of electrolytic capacitors.

    Original Description:

    Original Title

    Ampl1W

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This module uses a Samsung KA2209 IC to function as a stereo amplifier suitable for portable cassette players and radios. It can operate from 1.8V to 9V, making it suitable for battery use. The circuit is designed to connect the amplifier in a stereo pattern to accept a preamplifier input and power speakers between 1W and 8 ohms. Assembly instructions describe soldering lowest height components like resistors first, then the IC socket and capacitors while ensuring correct polarity of electrolytic capacitors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views1 page

    Ck704 - 1W Stereo Amplifier Module: Components

    Uploaded by

    jimrodas
    This module uses a Samsung KA2209 IC to function as a stereo amplifier suitable for portable cassette players and radios. It can operate from 1.8V to 9V, making it suitable for battery use. The circuit is designed to connect the amplifier in a stereo pattern to accept a preamplifier input and power speakers between 1W and 8 ohms. Assembly instructions describe soldering lowest height components like resistors first, then the IC socket and capacitors while ensuring correct polarity of electrolytic capacitors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    CK704 - 1W STEREO AMPLIFIER MODULE

    This stereo amplifier module uses the Samsung KA2209 8-pin IC. This is an equivalent IC to the TDA2822. It is designed for portable casette players & radios. It has a wide operating supply voltage of 1.8V to 9V so it is suitable for battery operation. It can be connected in either a stereo or bridge pattern. The stereo connection is used in this kit. Feed the output from a preamplifier into this kit. The kit is constructed on a single-sided printed circuit board (PCB) with a printed overlay and bottom solder mask. Protel Autotrax and Schematic were used to produce it. ASSEMBLY INSTRUCTIONS Check off the components in the bag against the Component listing. It is generally easiest to solder the lowest height components first - the resistors. Then solder the IC socket & capacitors. The main thing to watch is to get the electrolytic capacitors in the correct way. The negative terminal is marked on the body of the capacitor. And the positive is marked on the overlay of the PCB. Also make sure to get the IC around the correct way. The dot or marked end of the IC corresponds to the indent shown in the overlay. Pads are provided for the stereo signal in, out and the power supply. Hook-up wire and speakers are for the user to supply. Speakers should be a minimum of 1W, 4 or 8 ohm. CIRCUIT DESCRIPTION This is the text book circuit for this IC in stereo mode. It is ideal for battery powered operation. Power output depends critically on speaker resistance & supply voltage. At 3V into 4 ohm speakers the power is 0.1W. At 6V into 4 ohm speakers it is 0.65W. At 9V it is over 1W.

    COMPONENTS Resistors 1/4W, 5%: 4R7 yellow violet gold R3 R4 10K brown black orange R1 R2 Electrolytic capacitors 10uF mini C1 100uF/25V C4 C5 470uF/16V C2 C3 100nF box capacitor C6 C7 KA2209 IC 8 pin IC socket Kit 87 PCB

    2 2 1 2 2 2 1 1 1

    See all our kits at

    http://www.ElectronicKits.com/

    You might also like