Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Shoe Polish

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Pour into a container. The mixture needs to settle for four hours before being used.

Use in the same way as shoe polish purchased in the shops.

MAKING YOUR OWN SHOE POLISH

REAP, P.O. Box 21083, Ngong Road, Nairobi, 00505, Kenya.

A simple shoe polish can be made at home by dissolving charcoal powder and soap in water. In order to make shoe polish you will need: A hard type of charcoal Water A piece of hard bar soap 5 drops of kerosene One sachet of citric acid One capful of glycerine or liquid paraffin 1. Choose the hard type of charcoal. The soft type of charcoal is easier to grind but does not

REAP Teaching Leaflet # 10

bring out good results due to too much powder, so make sure you choose the hard type. (Use local knowledge to find the best type of trees for producing this hard charcoal.) 2. Grind it into a very fine powder. The powder has to be soft and evenly ground or else it will not make good polish.

6. Cut this quarter into small pieces and dissolve it in the water. 7. Add two glasses of sieved charcoal powder. 8. Heat the mixture on a fire until it boils, stirring so that it does not clot. 9. Remove the pan from the fire. 10. Add five drops of kerosene. Keep stirring. 3. Sieve the powder using a kitchen sieve. 4. Measure one and a half glasses of water. 5. For best results use hard bar soap. Cut one square of the bar soap into four quarters. Use only one quarter for the polish.
REAP Teaching Leaflet # 10

11. After two minutes add one sachet of citric acid and one capful of glycerine or liquid paraffin.

You might also like