Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
6K views

Mikrotik Script and Scheduler

The document describes how to use Mikrotik scripts and scheduler to limit bandwidth for different times of day. It involves creating two simple queues with different bandwidth limits for day and night, writing scripts to enable the appropriate queue, and scheduling the scripts to run at the specified times.

Uploaded by

Oki
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
6K views

Mikrotik Script and Scheduler

The document describes how to use Mikrotik scripts and scheduler to limit bandwidth for different times of day. It involves creating two simple queues with different bandwidth limits for day and night, writing scripts to enable the appropriate queue, and scheduling the scripts to run at the specified times.

Uploaded by

Oki
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mikrotik Script and Scheduler

There are lot many ways to limit bandwidth for day and Night, but
personally I found this is the easiest way, Here it is.

I have used Simple Queue, Script and Scheduler.

Suppose we have one network 192.168.1.0/24 and want to limit


Bandwidth for day and Night Time.

Network 192.168.1.0/24
Bandwidth = 06:00am – 18:00pm – 1Mbps.
Bandwidth = 18:00pm – 06:00am – 2Mbps.
Create two simple queues for the same network with different
Bandwidth Limit.

/queue simple
#name=”Day” target-addresses=192.168.1.0/24
dst-address=0.0.0.0/0
interface= parent=none direction=both priority=8
queue=default-small/default-small limit-at=512k/512k
max-limit=1M/1M total-queue=default-small
#name=”Night” target-addresses=192.168.1.0/24
dst-address=0.0.0.0/0
interface= parent=none direction=both priority=8
queue=default-small/default-small limit-at=1M/1M
max-limit=2M/2M total-queue=default-small
Now, write scripts
/system script
#name=”Day” source=/queue simple enable Day; /queue simple
disable Night
#name=”Night” source=/queue simple enable Night; /queue simple
disable Day
Finally, Schedule it
/system scheduler
#name=”Day” on-event=Day start-date=oct/13/2007
start-time=06:00:00 interval=1d
#name=”Night” on-event=Night start-date=oct/13/2007
start-time=18:00:00 interval=1d

credit : MikroTik Wiki

You might also like