Ingenico - 28/32 boulevard de Grenelle - 75015 Paris - France

Tl. 33(0)1 58 01 80 00 - Fax 33 (0) 1 58 01 91 35 - ingenico@ingenico.com

TELIUM SDK 9.0.1 RELEASE NOTE

Reference: ICO-PE-537-RE-EN V1

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 2 / 20
Please check document validity before using

Contents
1. Standard development platforms _______________________________________ 4
1.1. List of compatible terminals___________________________________________________ 4
1.1.1. Wireless ________________________________________________________________________________4
1.1.2. Countertop terminals _____________________________________________________________________4
1.1.3. Signature capture terminals (Retail pinpads)___________________________________________________4
1.1.4. Pinpads_________________________________________________________________________________4
1.1.5. Unattended _____________________________________________________________________________5
1.1.6. Satellite terminals ________________________________________________________________________5
1.1.7. Mobile payment__________________________________________________________________________5
1.1.8. French health care ________________________________________________________________________5
1.2. Terminals certified PCI V3______________________________________________________5
1.3. Public Key Infrastructure ______________________________________________________5
2. Whats new?__________________________________________________________5
3. Highlighted points ___________________________________________________ 6
3.1. Restriction for iPA280 and PCI PED 2.x compliance ________________________________ 6
3.2. GOAL catalogues naming rule _________________________________________________ 6
3.3. Contactless _________________________________________________________________7
3.3.1. Best practices for Contactless_______________________________________________________________7
3.3.1.1. Field on/off___________________________________________________________________________7
3.3.1.2. Implicit selection ______________________________________________________________________7
3.3.1.3. Use of PSTN modem with contactless activated _____________________________________________7
3.3.2. Add-on Contactless _______________________________________________________________________7
3.3.3. Card supported _________________________________________________________________________ 8
3.4. Family name________________________________________________________________ 8
3.5. Pinpad system______________________________________________________________ 8
3.6. DIR system version downgrade ________________________________________________ 8
3.7. Reserved numbers __________________________________________________________ 8
3.8. EFT930 embedding 8MB of flash_______________________________________________ 8
3.9. Fix in link layer ______________________________________________________________ 9
3.10. PCI PTS version _____________________________________________________________ 9
4. Issues solved in this release by component _______________________________10
4.1. Telium System______________________________________________________________10
4.2. Telium Manager ____________________________________________________________10
4.2.1. Evolutions______________________________________________________________________________10
4.3. Security ___________________________________________________________________ 11
4.3.1. DLL Security ____________________________________________________________________________ 11
4.3.2. Security Extend library____________________________________________________________________ 11
4.3.3. DLL E2EE_______________________________________________________________________________ 11
4.3.4. DLL Digest _____________________________________________________________________________ 11
4.3.5. Schemes _______________________________________________________________________________ 11
4.4. Communication_____________________________________________________________ 12
4.4.1. Link Layer ______________________________________________________________________________ 12
4.4.2. Pack IP ________________________________________________________________________________ 12
4.4.3. DLL SSL________________________________________________________________________________ 12

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 3 / 20
Please check document validity before using

4.4.4. FTP ___________________________________________________________________________________ 12
4.4.5. SNMP _________________________________________________________________________________ 12
4.5. Display ____________________________________________________________________ 12
4.5.1. GOAL _________________________________________________________________________________ 12
4.5.2. DLL Image _____________________________________________________________________________ 13
4.5.3. Fonts__________________________________________________________________________________ 13
4.5.4. CGUI / CGUI tools ________________________________________________________________________ 13
4.5.5. Plug-ins ________________________________________________________________________________ 13
4.6. Contactless ________________________________________________________________ 13
4.6.1. DLL TPass ______________________________________________________________________________ 13
4.6.2. Entry Point _____________________________________________________________________________ 13
4.6.3. TeliumPass _____________________________________________________________________________ 13
4.7. Applications________________________________________________________________ 13
4.7.1. Incendo Online browser __________________________________________________________________ 13
4.7.1.1. Memory ____________________________________________________________________________ 14
4.7.1.2. Migration to this version _______________________________________________________________ 14
4.7.1.2.1. Migration from a version before 3.0.4 ___________________________________________________ 14
4.7.1.3. Compatibility ________________________________________________________________________ 14
4.7.1.3.1. Terminals managed__________________________________________________________________ 14
4.7.1.3.2. EMV packages compatibility___________________________________________________________ 14
4.7.1.4. Evolutions __________________________________________________________________________ 14
4.7.2. Image Loader ___________________________________________________________________________ 14
4.7.2.1. Evolutions __________________________________________________________________________ 14
4.8. AVL_______________________________________________________________________14
4.9. Full configuration for local download for iPP320 in pinpad emulation mode____________ 15
4.9.1. DLL PPLoad evolution ____________________________________________________________________ 15
4.10. SDK features _______________________________________________________________ 15
5. Evolutions in API _____________________________________________________ 15
5.1. Deprecated functions ________________________________________________________ 15
6. Add-ons to Telium SDK________________________________________________ 15
7. Version of components _______________________________________________ 17
8. Supported card types _________________________________________________19


Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 4 / 20
Please check document validity before using

1. Standard development platforms
1.1. List of compatible terminals
This SDK release is compatible with the following products.
1.1.1. Wireless
Telium 2:
iWL220B, iWL220G,
iWL250B, iWL250G ,
iWL250 3G,
iWL250 2SCR (2SCR stands for 2 Smart Card Reader),
iWL280 (Signature capture),
iWL350 (For development only)

Telium 1:
EFT930 Color
EFT930 Black and White
1.1.2. Countertop terminals
Telium 2:
iCT220, iCT250,
E532

Telium 1:
EFT SMART Plus,
EFT SMART,
EFT30
1.1.3. Signature capture terminals (Retail pinpads)
Telium 2:
iSC250,
iSC350
1.1.4. Pinpads
Telium 2:
iPP320, iPP350,
iPP3xx used as a smart card reader (Pinpad emulation mode).

Telium 1:
ML30, ML30 color, ML30 color contactless.

Booster only pinpads:
iPP220, iPP250, iPP280, PPC30, PPR30, P30, P30 Contactless, PP30, PP30S.

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 5 / 20
Please check document validity before using

1.1.5. Unattended
Telium 1:
See UCM add-on package for the exhaustive list of CAD30.

Telium 2:
iUC150, IUC180, iUP250 (for development only)
1.1.6. Satellite terminals
Telium 2:
iST150.

Telium 1:
TeliumPass Plus.
1.1.7. Mobile payment
Telium 2:
iMP3xx (only hardware V4 are supported since SDK 8.0.1),
SPM (iPA280).
1.1.8. French health care
TWINs.
1.2. Terminals certified PCI V3
The following terminals are certified for PCI v3:


iWL220 Since SDK 8.0.1
iWL250 Since SDK 8.0.1
iWL280 Since SDK 8.0.1
iSC250 Since SDK 8.0.1
iPP320 Since SDK 8.1
iPP350 Since SDK 8.1
iMP350 Since SDK 8.2
iCT2xx Since SDK 8.2
iPP2xx Since SDK 8.2
iWL350 Since SDK 9.0


1.3. Public Key Infrastructure
This release supports PKI V3.
2. Whats new?
Issues solved are detailed in paragraph 4.

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 6 / 20
Please check document validity before using


Here are main evolutions coming with this Telium SDK release compared to the release 9.0.
Improvement on GOAL:
o Optimization for applications developed with LibGr running on GOAL terminals,
o Some fixes and improvements for GOAL applications.
3. Highlighted points
3.1. Restriction for iPA280 and PCI PED 2.x compliance
During the PCI PED 2.x certification of the iPA280 devices, some constraints have been put at the level
of communication of sensitive data from the Secure Payment Module (SPM) to the external world. The
PDA part of the product has to be considered as the external world. The reason of this restriction is that
the scope of the PCI PED evaluation was the SPM, which has a secure Telium architecture, and not the
iPA280 product as a whole.

The restriction forbids communicating:
Any APDU command response;
Any cardholder data (i.e. ISO tracks 1 & 2 and their EMV counterpart).
It is also forbidden to receive APDU command queries from the external and to relay them to the
smartcard. The restriction imposed by PCI SSC is not limited to banking cards. Direct communication to
other types of cards (e.g. loyalty) is not allowed.

The communication APIs to establish communication between SPM and PDA propose some interfaces.
It is for sure possible to address communication by using lower level functionalities. This must not be
used to circumvent the protocol restrictions for communication.

Since cardholder data must remain within the SPM, the implication of this restriction is that payment
applications have to be executed in the SPM and can not be based on a split design between SPM and
PDA parts of the device. The PDA can be used for merchant application only (i.e. advertising, product
selection)
3.2. GOAL catalogues naming rule
The integration of GOAL in the Telium SDK 9.0 had introduced changes in the Telium Manager
catalogues provided.

The naming rules have been maintained for compatibility and to minimize the changes for users.

This sheet describes the application compatibility and Telium Manager MMI regarding names of
catalogues.
Thunder Catalogues names
Application
compatibility
Telium Manager MMI
Thunder 1 and 2 xxx_GOAL_yyy.mZZ GOAL and Libgr GOAL
Thunder 1 and 2 xxx_CGUI_yyy.mZZ CGUI, GOAL and Libgr GOAL
Thunder 1 and 2 xxx_yyy.mZZ Libgr Libgr
Thunder 3 xxx_GOAL_yyy.mZZ GOAL and Libgr GOAL
Thunder 3 xxx_yyy.mZZ CGUI, GOAL and Libgr GOAL

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 7 / 20
Please check document validity before using


The Telium manager displayed with CGUI interface doesnt exist anymore; it is replaced by the GOAL
interface. The name xxx_CGUI_yyy.mZZ for a catalogue means that it is compatible with CGUI
applications but the Manager interface is GOAL.

The Telium Manager catalogues xxx_MOCKUP.mZZ dont exist anymore. They were designed to use the
Ingedev preview feature. If you want to use this feature, you have to load in your terminal, the
catalogue CGUI_PREVIEW_PROXY.mZZ which is in the directory Components\CGUI_PREVIEW_PROXY,
additionally to the CGUI manager catalogue.

The Telium Manager catalogues include NanoX, the plug-in Signature Capture and the plug-in
Multimedia. So, the plug-ins are no more delivered in the directory \Component\plugins.
3.3. Contactless
3.3.1. Best practices for Contactless
3.3.1.1. Field on/off
The contactless field is to be activated only when a contactless card is waited by the terminal. It must be
stopped when the management of the contactless card is finished.
If the contactless field is opened all the time:
On wireless terminals, product battery autonomy is reduced a lot;
The contactless module and antenna are highly stressed and reliability could decrease quickly
with time;
Applications have to manage the opening and the closing of the field according their business logic.
3.3.1.2. Implicit selection
Following terminals having the contactless feature inside are concerned: iWL2xx, iCT250, iSC2xx, iSC3xx,
EFT930 GCC, EFT930 BCC, iPP3XX, iPA280 (SPM), ML30C and P30C.

Implicit selection is not recommended and must be managed with caution.
Due to physical reason, implicit selection can lead to unexpected issues, for example, at the beginning
of the swipe, the card would possibly enter the antenna field and contactless chip would be handled
instead of magnetic track.
3.3.1.3. Use of PSTN modem with contactless activated
The electro-magnetic field created when the contactless is activated, on an integrated terminal,
prevents the usage of the PSTN modem with contactless activated.
This is not a software issue, and no software solution exists. The contactless field shall not be activated
at the same time as the modem.

Currently, the issue exists only on the iCT250, which is the only Ingenico integrated terminal with
contactless and PSTN modem.
(For instance, on EFT930BCC or EFT930GCC with modem, it works, because the modem is on the cradle,
and the distance between the modem and the contactless field is sufficient).
3.3.2. Add-on Contactless
The add-on contactless doesnt exist anymore.

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 8 / 20
Please check document validity before using

All components provided previously in this package are now by default since Telium SDK 8.1. It concerns
TPass library and component;
Entry point component;
GTL library;
Contactless sample.
3.3.3. Card supported
The list of cards supported by this SDK is given in the paragraph 8: Supported card types .

Recommendation:
Even if a card is managed since an old SDK or Add-On Contactless, usage of a recent SDK is strongly
recommend because bugs could have been fixed.
3.4. Family name
The family name, defined in the descriptor used to sign the binary, must follow the pattern
<NAME><VV><AA> where:
NAME is the radical of application (maximum 7 ASCII characters);
VV is the version (2 number);
AA is the amendment (2 number)
3.5. Pinpad system
To avoid problems when a non mock-up pinpad is linked to a mock-up terminal, the terminal mock-up
catalogues dont include pinpad systems. So, you have to load the pinpad system (located in the
directory Component\OS) according to the pinpad you are using.
3.6. DIR system version downgrade
It is not possible to downgrade from a system managing directories (catalogue XXX_DIR.mYY) to a
system which not manages directories (catalogue XXX.mYY).
3.7. Reserved numbers
Service numbers from 1 to 100 and from 0x1E00 0x1FFF are reserved for Ingenico internal use.
Tag numbers used by applications must be taken in the range 0x9FA000-0x9FAFFF.
3.8. EFT930 embedding 8MB of flash
It is possible to use this SDK on EFT930 which has only 8 MB of flash (special system catalogue is
provided: EFT930_8MO_PROD.m31). This catalogue is not a DIR one. If you use Ingestate you may need
some adjustments: please contact your R&D Regional Interface for more information.

For SDK 8.0.x, SDK 8.1 and SDK 8.1.1:
It is forbidden to load a catalogue designed for 8MB terminals on a terminal loaded with a generic
catalogue (that is to say non-8 MB). You must contact the Ingenico support for the rules of this
migration.

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 9 / 20
Please check document validity before using

3.9. Fix in link layer
A bug has been identified in the LinkLayer component, in versions 3.22 and 3.23 (SDK 8.1.2, SDK 8.1.3,
SDK 8.2 and SDK 8.2.1).
For these versions only, on Bluetooth terminals, not associated with any base, the connection (call to
LL_Connect()) fails when using the physical link LL_PHYSICAL_V_DEFAULT_TCPIP, with return code -
1013 (LL_ERROR_NETWORK_NOT_SUPPORTED).
This bug is now corrected in SDK 9.0 (Link Layer version 3.25)
3.10. PCI PTS version
In order to know the PCI PTS version of the product, you can use the fioctl
SYS_FIOCTL_GET_PCI_PTS_VERSION returns PCI_PTS_V2 or PCI_PTS_V3 (or -1 if the fioctl is not
implemented). This function is only implemented on Telium2.
The function GetTerminalPKIVersion() allows to know the PKI Version (return is PKIV1 or PKIV3).

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 10 / 20
Please check document validity before using


4. Issues solved in this release by component
See table in chapter 7 Versions of components for the list of
versions of components provided in this Telium SDK.

Main points delivered in this release are listed below.
4.1. Telium System
Following points are delivered in this release.

Internal
tracker
SUPTEL Description
11184
Corrected issue on booster reboot when previous exception on
swipe management.
11311 SUPTEL-2649
Remote debugger when terminal is in HID mode issue fixed
If the terminal is forced in USB-HID mode and the connection used
for the LDBG link is by default the USB port, the terminal is forced in
USB-CDC mode during the debug session.
11210 SUPTEL-3311
Fix for iPP350 sometimes rebooting when contactless transaction
was started with synchronous card inserted
11189 SUPTEL-3378
Fixed terminal reset due to a lack of RAM memory. More precisely:
When a driver for synchronous card was launched on thunder side,
the OS booster allocates RAM for loading, copying and executing
this driver. This RAM is kept allocated to avoid the reloading of the
driver in case same driver is used. So the RAM memory available is
decreased. The bug fix consists in releasing the allocated RAM in
case of power_down / fclose.
11475 Management of "GPRS only" SIMs
11534
Added external Bluetooth printer and Bluetooth driver in the
iMP3xx catalogues
11560 SUPTEL-3267
Improvement: reduced swipe sensitivity (only on ICT-GPRS
terminal)

4.2. Telium Manager
4.2.1. Evolutions
Following points are delivered in this release.

Internal
tracker
SUPTEL Description
10017 Use of GOAL in Manager
10591 SUPTEL-2935
__LoadDefaultOptions () didnt work all the time on an iWL250
Bluetooth with Ethernet base.

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 11 / 20
Please check document validity before using

11367
New catalogues for healthcare : iMP3, iWL280 Catalogues for healthcare
removed : ML30
11481 SUPTEL-3505 Allows entry of the character * (star) in the PABX initialisation string.
11568 Character '(' was twice in default table for alphanumerical entry
11569 Bug fixed when allocated resources using IAM
11622
On EFT930 Morpho: Fixed freeze when editing hardware configuration
ticket
11625
GetGeneralStatus() improvement:
To start card management at start-up, to use GetGeneralStatus()
function, put this code and call this function in AFTER_RESET entry point
void ActivateCardManagement(void)
{
S_STATE_PARAM state_param;

PSQ_read_state_param(&state_param);
state_param.EnableCamManagement=1;
PSQ_write_state_param(&state_param);
}

4.3. Security
4.3.1. DLL Security
No evolution.
4.3.2. Security Extend library
Following points are delivered in this release.

Internal
tracker
SUPTEL Description
9369 Fixed compilation issue with use of SEC_extend.h
9491 SUPTEL-2148
Function SEC_DukptCBCCipher with algo type TLV_TYPE_TDESDUKPT
froze Booster 1 terminals

4.3.3. DLL E2EE
No evolution.
4.3.4. DLL Digest
No evolution.
4.3.5. Schemes
Last schemes certified are included in this SDK.


Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 12 / 20
Please check document validity before using

4.4. Communication
4.4.1. Link Layer
No evolution.
4.4.2. Pack IP
No evolution.
4.4.3. DLL SSL

Internal
tracker
SUPTEL Description
11165 SUPTEL-3354
Add support of CRL file. CRL file must be added to the SSL profile with
SSL_ProfileAddCertificateCA function.
11488 Possibility to use DLL SSL on an SSL connexion not managed by DLL SSL.
11527
There were some unitialized variables used during SSL connection on
iMP3xx only.
4.4.4. FTP
No evolution.
4.4.5. SNMP
No evolution.

4.5. Display
4.5.1. GOAL
Following points are delivered in this release.

Internal
tracker
SUPTEL Description
11493 The progress-bar text property is not correctly managed
11632 SUPTEL-3620
G_Extended_Entry : on ICT250, not possible to exit via Cancel (red
button). Idem on IWL280 (OK by touchscreen but not by keyboard)
11631 SUPTEL-3665
cGUI Performance - Delayed Response from scrollbar when large
amount of text displayed on TextArea Control
Adds picture image cache

Adding vectorized mode in drawing widgets (@ref
GL_Drawing_SetVectorized, @ref GL_Drawing_GetVectorized)

Adding draw area in drawing widgets (@ref GL_Drawing_DrawArea,
@ref GL_Drawing_GetPixelType)

Changing the internal behavior of scrollbars (the min and max now
shows the movement of the slider)

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 13 / 20
Please check document validity before using


Added ability to scroll the view by the code C (@ref
GL_ScrollView_GetVerticalRange, @ref
GL_ScrollView_GetHorizontalRange, @ref GL_ScrollView_Move)

Added ability to define a mask user in an input field (@ref
GL_Widget_GetUserChar, @ref GL_Widget_SetUserChar)
The cancel button will exit the dialog keyboard
Reducing the size of text on dialog boxes

Remove the image of the virtual keyboard on the function @ref
GL_Dialog_Scheme
4.5.2. DLL Image
No evolution.
4.5.3. Fonts
No evolution.
4.5.4. CGUI / CGUI tools
Internal minor change.
4.5.5. Plug-ins
Now delivered in Telium manager catalogues as described above.
4.6. Contactless
4.6.1. DLL TPass
Following points are delivered in this release.

Internal
tracker
SUPTEL Description
7871
TFU 4977
SUPTEL-1464
When the selected AID is used by more than one application, the new
service CLESS_SERVICE_CUST_DEBIT_SAME_AID is called to determine
which application will manage the card.

4.6.2. Entry Point
No evolution.
4.6.3. TeliumPass
No evolution.
4.7. Applications
4.7.1. Incendo Online browser
Technical documentation and the Incendo SDK are provided with Ingedev (from version 7.8.0).

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 14 / 20
Please check document validity before using

4.7.1.1. Memory
Before deploying this solution, please check the memory usage of your terminals.
4.7.1.2. Migration to this version
4.7.1.2.1. Migration from a version before 3.0.4
Incendo Online smart browser was previously delivered as an independent package (up to version
3.0.3). It was designed to be signed with region security keys.
The version in this Telium SDK is signed with manufacturer key. So the application type is different
between these two versions. If you have already deployed the browser, to migrate to the version
included in a Telium SDK, you must manage the change of application type. For further details, please
contact the Incendo support.
4.7.1.3. Compatibility
4.7.1.3.1. Terminals managed
Minimal hardware prerequisites are:
Terminal is Ethernet or GPRS;
Terminals is Ingetrust ready;
Minimum of 16 MB of Flash is mandatory;
16 MB of RAM are recommended but not mandatory. 8 MB is possible if terminal is Incendo
Online only (no other applications).

Incendo Online is compatible with the following terminals:
iCT220, iCT250,
iWL220, iWL250
You must not use it on other terminals.

Support of EFT930 color, iSC250, iSC350 and iWL280 will be available in a future release.
4.7.1.3.2. EMV packages compatibility
Incendo smart Browser is compatible with the following EMV packages:
Version 19 or 20.1
4.7.1.4. Evolutions
Please read the release note under \Applications\IncendoBrowser.
4.7.2. Image Loader
At the end of the Telium SDK setup you can choose to install Image Loader on your PC. Documentation
is available in this installed package.
4.7.2.1. Evolutions
No evolution.
4.8. AVL
Following points are delivered in this release.

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 15 / 20
Please check document validity before using


Internal
tracker
SUPTEL Description
11553 SUPTEL-3626 AVLcpp.lib provided for GCC4
4.9. Full configuration for local download for iPP320 in pinpad
emulation mode
A binary concatenates the Telium system (including contactless driver) and the Telium manager for an
iPP3 used in pinpad emulation for local download mode. It is delivered in the directory:
Component\iPP3_EmulationPinpad\Package
Please see description in the CHM help file of the Telium SDK (SDK General Documentation > HOW TO
DEVELOP user guide > How to use iPP3xx as a smart card reader).

This package is not updated for SDK 9.0.1.
4.9.1. DLL PPLoad evolution
The DLL PPLoad is present in the host terminal and allows the loading of the full configuration to the
iPP3.
No evolution.
4.10. SDK features
Following points are delivered in this release.

Internal
tracker
SUPTEL Description
11552 SUPTEL-3627 TLV Tree presentation documentation was missing in SDK 9.0
5. Evolutions in API
5.1. Deprecated functions
SEC_DukptComputeMAC_AC() and SEC_DukptVerifyMAC_AC are now deprecated. If you want to
continue to use it until its definitive removal, you have to had to compile your application with the
define _DEPRECATED_SDK90_.
6. Add-ons to Telium SDK
The following table presents the versions of recommended add-ons to use with this SDK.

Add on
Recommended
version to use with this SDK
Comment
Easy Path To EMV 20.2

Rel ea s e Not e

Ingenico document - Reproduction or disclosure prohibited without written authorization Page 16 / 20
Please check document validity before using

Add On Contactless (New
architecture)
Removed
Components previously in this
add-on are in the Telium SDK
since 8.1
Easy Path To Contactless 3. 07.02

Add On PCL for iPA280 1.18
Add On PCL for iWP 1.15

Add On PCL for iMP3xx 1.02
Add On Morpho 1.06

Add On Telicapt 2.17

Add On UCM 2.06.01
Add On SPDH 1.01

Add On APACS 40 Generic 1.08

Add On ISO8583 Generic 3.02





Rel ea s e Not e

For additional information, please contact your R&D Regional Interface
7. Version of components
The following table compiles the versions of components provided in this version of the SDK and in the previous ones.
In this table, grey cells correspond to evolution of the component.

Security Communication Display Contactless Applications
iPP320 in
emulation
mode
SDK
S
y
s
t
e
m

M
a
n
a
g
e
r

D
L
L

H
a
r
d
w
a
r
e

D
L
L

S
e
c
u
r
i
t
y

D
L
L

S
e
c
u
r
i
t
y

E
x
t
e
n
d

D
L
L

E
2
E
E

T
L
V

S
c
h
e
m
e
s

S
c
h
e
m
e
s

P
i
n
l
i
b

I
A
P
P

L
i
n
k

L
a
y
e
r

P
a
c
k

I
P

F
T
P

S
N
M
P

S
S
L

D
L
L

I
m
a
g
e

F
o
n
t
s

C
g
u
i

G
O
A
L

N
a
n
o
X

C
g
u
i

t
o
o
l
s

S
i
g
n
a
t
u
r
e

c
a
p
t
u
r
e

M
u
l
t
i
m
e
d
i
a

D
L
L

T
p
a
s
s

E
n
t
r
y

P
o
i
n
t

G
T
L

T
e
l
i
u
m

P
a
s
s

V
e
n
d
i
n
g

P
a
s
s

I
n
c
e
n
d
o

O
n
l
i
n
e

b
r
o
w
s
e
r

I
m
a
g
e

L
o
a
d
e
r

A
V
L

D
L
L

P
P
L
o
a
d

i
P
P
3

c
o
n
f

9.0.1 1104 6503 2.62 3.21 2.08 4.02 2.06 3.07 1.10 1.10 3.25 3.11 1.21 1.01 1.83 1.01 1.10 2.01 3.06 (10) 1.10 (10) (10) 2.32 0.22 1.16 2.24 3.01 03.01.01 1.06 1.19 1.03 3.00
9.0 1102 6501 2.61 3.21 2.07 4.02 2.06 3.07 1.10 1.10 3.25 3.11 1.21 1.01 1.79 1.01 1.10 2.00 3.05 2.07 1.10 2.10 2.10 2.31 0.22 1.16 2.24 3.01 03.01.00 1.06 1.18 1.03 3.00
8.2
GOAL
1092 6598 2.60 3.21 2.04 4.02 2.06 3.07 1.10 1.10 3.22 3.10 1.21 1.01 1.69 1.01 1.10 2.00 3.03 2.04 1.10 2.10 2.10 2.30 0.22 1.16 2.23 3.01 03.01.00 1.06 1.17 1.03 NA
8.2.1 1092 6403 2.58 3.21 2.04 4.02 2.06 3.07 1.10 1.10 3.22 3.10 1.21 1.01 1.69 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 2.30 0.22 1.16 2.23 3.01 03.01.00 1.06 1.17 1.03 2.06
8.2 10.80 64.02 2.58 3.21 2.04 4.02 2.06 3.07 1.10 1.10 3.22 3.10 1.21 1.01 1.69 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 2.30 0.22 1.16 2.23 3.01 03.01.00 1.06 1.17 1.03 2.05
8.1.3
10.79
(9)
63.05 2.55 3.20 2.04 4.02 2.06 3.07 1.10 1.10 3.22 3.09 1.20 1.01 1.65 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 2.30 0.21 1.16 2.23 3.01 03.00.05 1.06 1.16 1.03 2.04
8.1.2
10.72
(8)
63.04 2.55 3.20 2.04 4.02 2.06 3.07 1.10 1.10 3.22 3.09 1.20 1.01 1.65 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 2.30 0.21 1.16 2.23 3.01 03.00.05 1.06 1.16 1.02 2.03
8.1.1
10.70
(7)
63.02 2.55 3.20 2.04 4.01 2.06 3.07 1.10 1.10 3.21 3.09 1.20 1.01 1.65 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 2.29 0.21 1.16 2.23 3.01 03.00.05 1.06 1.16 1.02 2.01
8.1 10.64 63.00 2.55 3.20 2.04 4.01 2.06 3.07 1.10 1.10 3.21 3.09 1.20 1.01 1.63 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 2.29 0.21 1.16 2.23 3.01 03.00.05 1.06 1.16 1.01 2.01
8.0.2 10.50 62.04 2.54 3.20 2.04 1.01 2.04 3.06 1.10 1.10 3.20 3.08 1.20 1.01 1.61 1.01 1.10 1.17 - 1.24 1.10 1.09 1.09 03.00.04 1.06 1.16
8.0.1 10.46 62.03 2.53 3.20 2.04 1.01 2.04 3.06 1.10 1.10 3.20 3.08 1.20 1.01 1.61 1.01 1.10 1.17 - 1.24 1.10 1.08 1.09 03.00.04 1.06 1.15
8.0 10.35 62.00 2.50 3.20 2.04 1.01 2.04 3.06 1.10 1.10 3.20 3.08 1.20 1.01 1.61 1.01 1.10 1.17 1.23 1.10 1.07 1,08 1.06 1.15

(10) Plug-ins are now in the Manager catalogues
(9) 10.67 for iMP3, 10.77 for iWL280, 10.79 for the other terminals
(8) 10.67 for iMP3, 10.73 for iWL280, 10.72 for the other terminals
(7) 10.67 for iMP3, 10.70 for the other terminals


Rel ea s e Not e

For additional information, please contact your R&D Regional Interface


Ingenico document - Reproduction or disclosure prohibited without written authorization Page 19 / 20
Please check document validity before using
8. Supported card types
This table shows the minimal version of package (add-on contactless and SDK) for the support of a
type of card by a terminal.

Product EMV 1.1 EMV 2.0 EMV 2.0.1 Mifare 1K Mifare 4K
Mifare
UltraLight
STM
Innovatron
Calypso
Telium Pass+ Add-On 3.0 - - Add-On 3.0 Add-On 3.5 Add-On 3.5 Add-On 3.5 Add-On 3.6
Vending Pass Add-On 3.0 - - Add-On 3.0 Add-On 3.6 Add-On 3.5 Add-On 3.5 Add-On 3.5
P30
SDK 5.8
Add-On 3.0
- -
SDK 5.8
Add-On 3.0
SDK 7.2
Add-On 3.5
SDK 6.4.1
Add-On 3.5
- -
ML30
SDK 5.8
Add-On 3.0
- -
SDK 5.8
Add-On 3.0
SDK 6.6
Add-On 3.5
SDK 6.4.1
Add-On 3.5
- -
CAD30UCR +
EPSUM A40
SDK 5.8
Add-On 3.0
- -
SDK 5.8
Add-On 3.0
SDK 7.1
Add-On 3.5
SDK 6.2.2
Add-On 3.5
SDK 5.8
Add-On 3.5
SDK 7.3
Add-On 3.5
EFT930CC
SDK 6.2
Add-On 3.0
- -
SDK 6.2
Add-On 3.0
SDK 7.1
Add-On 3.5
SDK 6.4
Add-On 3.5
-
SDK 7.1
Add-On 3.5
iCT250
SDK 6.4
Add-On 3.0
- -
SDK 6.4
Add-On 3.0
SDK 7.1
Add-On 3.5
SDK 6.4
Add-On 3.5
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.6
iPA280
SDK 6.4
Add-On 3.0
- -
SDK 6.4
Add-On 3.0
SDK 7.1
Add-On 3.5
SDK 6.4
Add-On 3.5
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.6
iPP220
iPP250
-
SDK 7.1
Add-On 3.2
-
SDK 7.1
Add-On 3.2
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.5
SDK 7.2
Add-On 3.5
iPP280 -
SDK 7.5
Add-On 3.7
-
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
iPP320
iPP350
-
SDK 7.1
Add-On 3.2
-
SDK 7.1
Add-On 3.2
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.5
SDK 7.1
Add-On 3.6
iSC250 - -
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
iSC350 -
SDK 7.2
Add-On 3.2
-
SDK 7.2
Add-On 3.2
SDK 7.2
Add-On 3.5
SDK 7.2
Add-On 3.5
SDK 7.2
Add-On 3.5
SDK 7.1
Add-On 3.6
iWL220
iWL250
- -
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
iWL280 - -
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
iMP3xx - -
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
SDK 8.0.1
Add-On 3.10
iST150
(TeliumPass
emulation)
- -
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
SDK 7.5
Add-On 3.7
iST150
(Intelligent
mode)
- -
SDK 7.5
Add-On 3.9
SDK 7.5
Add-On 3.9
SDK 7.5
Add-On 3.9
SDK 7.5
Add-On 3.9
SDK 7.5
Add-On 3.9
SDK 7.5
Add-On 3.9








Ingenico document - Reproduction or disclosure prohibited without written authorization Page 20 / 20
Please check document validity before using








WARNING: Integrity of TELIUM Manager and TELIUM System must be respected
You shall respect the integrity of SDK components (c.f. list)
and never mix components from different SDKs, except following INGENICO requirements.
INGENICO only guarantees a standard package. Partial or modified packages cannot be either downloaded, nor supported, nor
guaranteed by INGENICO.

This SDK is available on CDROM format on request or can be downloaded from INGENICO FTP server.