Fixed Prosthodontics
Fixed Prosthodontics
Fixed Prosthodontics
ARE THE OCCLUSAL INTERFERENCES CORRECTED IN THE PATIENTS MOUTH BEFORE THE
FABRICATION OF FIXED PROSTHESIS?
HOW DO WE DETERMINE THAT THE PATIENT DOES NOT HAVE ANY CENTRIC INTERFERENCES?
HOW DO WE RECORD THE CENTRIC RELATION? DOES THE PATIENT HAVE A CENTRIC SLIDE?
WHAT IS THE DURATION OF THE PARTIAL EDENTULISM?
WHAT HAPPENS TO THE OPPOSING TEETH DUE TO PARTIAL EDENTULISM?
WHAT ARE THE GUIDELINES FOR REDUCING THE SUPRA-ERUPTED TEETH?
WHAT MEASUREMENTS ARE REQUIRED BEFORE FABRICATION OF A FIXED PROSTHESIS?
HOW DO WE CALCULATE THE CROWN: ROOT RATIO?
WHAT IS THE SIGNIFICANCE OF THE DIMENSION OF EDENTULOUS AREA?
HOW DO WE MEASURE THE EDENTULOUS AREA ON THE DIAGNOSTIC CAST AND ITS
SIGNIFICANCE?
WHAT IS INCLUDED IN THE PERI-CEMENTAL ARE?
WHAT IS THE SIGNIFICANCE OF THE INTER-ARCH SPACE? DOES IT HAVE ANYTHING TO DO WITH
THE PONTIC DESIGN?
WHAT IS PONTIC DESIGN?
WHAT IS THE TREATMENT PLAN OF THE PATIENT?
JUSTIFY THE USE OF BULLET PONTIC AS THE CHOICE OF PONTIC DESIGN?
WITH WHAT INSTRUMENT IS THE INTER-ARCH SPACE MEASURED?
WHAT IS FUNCTIONAL BEVEL?
WHAT IS THE TYPE OF FINISH LINE USED FOR A PFM AND AN ALL CERAMIC CROWN? JUSTIFY
THE SAME.
WHERE WILL THE SHOULDER AND THE CHAMFER FINISH LINE MERGE?
WHAT IS THE DIFFERENCE BETWEEN DIAMOND POINTS AND BURS?
WHAT DO THE GREEN, BLACK, BLUE, YELLOW AND RED BANDS SIGNIFY ON THE DIAMONDS?
WHAT DO WE MEAN BY GINGIVAL BIOTYPE?
WHAT IS THE GINGIVAL BIOTYPE OF THE PATIENT?
HOW DO WE DETERMINE THE SIZE OF THE RETRACTION CORD WITH RESPECT TO THE GINGIVA?
WHERE SHOULD BE THE PLACEMENT OF THE MARGINS OF REDUCED TOOTH?
WHAT IS THE PURPOSE OF RETRACTION?
NAME THE DIFFERENT HAEMOSTATIC AGENTS USED?AND ITS ACTION?
VARIOUS METHODS OF ACHIEVING RETRACTION?
WHAT IS MAGICFOAM?
WHY IS IT NECESSARY TO REMOVE THE SMEAR LAYER?
WHICH TYPE OF DIAMIND IS USED FOR A SHOULDER MARGIN?
WHAT IS DONE AFTER TOOTH REDUCTION?
PLACEMENT OF RETRACTION CORD DEPENDS ON WHAT?
WHAT IS SINGLE AND DOUBLE CORD TECHNIQUE?
SULCUS DEPTH IS MEASURED WITH WHAT INSTRUMENT?
WHAT DO WE MEAN BY BIOLOGIC WIDTH? AND ITS SIGNIFICANCE?
VARIOUS TECHNIQUES FOR THE FABRICATION OF INTERIM PROSTHESIS?
MATERIALS USED FOR THE FABRICATION OF INTERIM PROSTHESIS?
WHAT DO WE MEAN BY ESF AND ISF?
WHY POLYETHYL METHACRYLATE IS NOT USED IN COMPARISON TO BIS-ACRYL PROVISIONALS?
WITH WHAT METHOD WAS THE ESF CREATED?
DIFFERENT CEMENTS USED FOR LUTING PROVISIONAL RESTORATIONS?
SIGNIFICANCE OF USING EUGENOL FREE CEMENTS FOR LUTING PROVISIONAL RESTORATIONS?
DOES EUGENOL PLAY ANY IMPORTANT ROLE DURING LUTING? DOES IT AFFECT THE
PROVISIONAL RESTORATION? DOES IT AFFECT THE PERMANENT PROSTHESIS?
NAME THE CEMENTS USED FOR LUTING PERMANENT CROWNS OR FIXED PROSTHESIS?
WHY ADHESIVES ARE NOT APPLIED WHILE MAKING AN IMPRESSION WITH ZOE?
COMPOSITION OF ZOE?
WHY SELF-CURE ACRYLIC RESIN IS USED FOR FABRICATION OF CUSTOM TRAY?
COMPOSITION OF TRAY ADHESIVES AND ITS ACTION?
HOW DO WE REMOVE THE EXCESS CEMENT? HOW IS THE EXCESS CEMENT REMOVED BENEATH
THE PONTIC?
TYPE OF ARTICULATING PAPER USED FOR CHECKING THE OCCLUSION?
DIFFERENT SIZES OF ARTICULATING PAPERS AVAILABLE?
DIFFERENT COLORS AVAILABLE IN ARTICULATING PAPERS? WHAT DO THE COLORS BLUE AND
RED SIGNIFY?
WHAT ARE ARTICULATING STRIPS CALLED AS?
VARIOUS BRANDS OF ARTICULATING PAPERS?
WHY DO WE REQUIRE A THICKER ARTICULATING PAPER FOR COMPLETE DENTURE AS
COMPARED TO A FIXED PARTIAL DENTURE?
VARIOUS IMPRESSION MATERIALS AND TECHNIQUES USED FOR MAKING IMPRESSIONS?
WHERE DO WE PLACE THE SPACER IN MULTIPLE-MIX TECHNIQUE?
WHY DOUBLE STAGE TECHNIQUE IS BETTER THAN SINGLE STAGE TECHNIQUE? JUSTIFY THE
STATEMENT.
HOW CAN WE RESTRICT THE FLOW OF PUTTY BEYOND SOME STAGE IN TWO STAGE TECHNQUE?
WHAT COMPANYS TRAY ADHESIVE IS USED?
WHY A SPECIAL TRAY WAS NOT FABRICATED FOR MAKING IMPRESSIONS FOR FIXED PARTIAL
DENTURE?
WHEN A SPECIAL TRAY IS USED FOR AN FPD CASE? FOR WHICH KIND OF CONSISTENCY?
WHICH IS THE NEXT CONSISTENCY AFTER PUTTY?
HEAVY BODY CAN BE USED AS A SPECIAL TRAY WITH WHAT?
IS INTER-OCCLUSAL RECORD MADE? IF YES, WITH WHAT MATERIAL? JUSTIFY THE USE OF
MATERIAL FOR THE SAME.
WHAT IS THE NEXT STEP AFTER BITE REGISTRATION?
HOW TO ADJUST FOR THE OCCLUSION AFTER THE INTER-OCCLUSAL RECORD IS REMOVED?
VARIOUS METHODS TO RECORD THE INTER-OCCLUSAL RECORDS?
DIE POURING IS DONE WITH WHAT MATERIAL?
WHAT IS PINDEX SYSTEM? WHAT KIND OF PINS ARE USED IN IT? ARE THE PINS WITH SLEEVES?
AND NO. OF PINS USED FOR THE SAME.
WHY DIE- CONTOURING IS DONE? AND WITH WHAT INSTRUMENT?
SIGNIFICANCE OF APPLYING DIE-SPACER?
DIE- SPACER IS APPLIED HOW MUCH AWAY FROM THE MARGIN?
COMPOSITION OF DIE HARDNER? HOW MANY COATS ARE APPLIED? WHICH ARE THE DIFFERENT
COLORS USED?
HOW ARE CONTACTS CHECKED WITH DENTAL FLOSS IN PROVISIONAL RESTORATIONS?
GRAND VIVA
WHAT DESIGN CONSIDERATIONS ARE THERE FOR FABRICATION OF MAJOR CONNECTORS?
DESIGNING DEPENDS ON THE PRINCIPLE OF WHAT?
WHAT ARE PRECISION ATTACHENTS? AND ITS ADVANTAGES?
WHAT ARE SEMI-PRECISION ATTACHMENTS?
DIFFERENT METHODS OF RETAINING MAXILLARY EXTRA-ORAL PROSTHESIS?
WHAT IS HTV AND RTV?
WHICH ARE THE INTERNAL AND EXTERNAL PIGMENTS USED FOR SILICONE?
WHAT IS PIER ABUTMENT?
WHAT ARE THE MODIFICATIONS TO BE DONE IN PIER ABUTMENTS?
WHAT IS RPI SYSTEM?
WHAT IS RPA?
WHY DO WE GIVE RPI AND NOT CIRCUMFERENTIAL CLASP ON A DISTAL EXTENSION TOOTH?
ADVANTAGES OF RPI SYSTEM?
WHAT ARE FUNCTIONAL IMPRESSIONS?
WHAT IS ALTERED CAST TECHNIQUE?
NAMES OF FLUID WAXES?
WHAT IS FLUID WAX TECHNIQUE?
WAXES USED FOR FABRICATION OF WAX PATTERN FOR FPD?
WHAT IS THE FULL NAME OF PKT?
HOW DO WE CREATE THE OCCLUSAL ANATOMY IN WAX PATTERN?
WHAT KIND OF WAX PATTERN IS MADE FOR PFM CROWNS?