Straumann Basic Information On The Prosthetc Procedures

BASIC INFORMATION ON THE
PROSTHETIC PROCEDURES
Straumann

Bone Level Implant Line
Straumann is the industrial partner of the International Team for Implantology (ITI)
in the areas of research, development and education.
CONTENT 1. Straumann
Bone Level Implant

Confidence at bone level 3
2. General information 4
2.1 CrossFit
Connection 4
2.2 Prosthetic options 6
2.3 Abutment overview 8
2.4 Coding 10
3. Preoperative planning 12
3.1 Wax-up/Set-up 12
3.2 X-ray template with reference spheres 12
3.3 Custom-made drill template 13
3.4 Thermoplastic drill template 14
4. Soft tissue management 15
4.1 Soft tissue management solutions 15
4.2 Prefabricated Healing Abutment 16
4.3 Customizable Healing Abutment 19
4.4 Temporary Abutment 21
5. Impression taking 28
5.1 Options for impression taking 28
5.2 Open tray impression 29
5.3 Closed tray impression 33
5.4 Bite registration 37
6. Restoration 39
6.1 CrossFit PLAN Set/PLAN Abutment 39
6.2 Anatomic (and Meso) Abutment 42
6.3 Gold Abutment for crown 49
6.4 Gold Abutment for bridge 61
6.5 Customized CAD/CAM Abutment 71
6.6 Cementable Abutment 81
6.7 Multi-Base Abutment 96
6.8 Abutment for bars 114
6.9 LOCATOR
Abutment 124
7. Aids and instruments 140
7.1 SCS Screwdriver 140
7.2 Polishing Aid 141
7.3 Ratchet and Torque Control Device 142
7.4 Assembling the Ratchet and the Torque Control Device 144
7.5 Tightening an abutment to 35 Ncm 146
8. About sterilization 148
9. Important guidelines 149
10. Index 150
X
X
2
PURPOSE OF THIS GUIDE
This guide describes the essential steps required for the fabrication and
insertion of prosthetic restorations for Straumann
Bone Level implants.

For detailed information regarding implantation and soft tissue management see
Basic information on the surgical procedures with the Straumann
Dental Implant
System (Art. No. USLIT100).
Note
Different procedures apply for dental technicians and prosthodontists. Such
procedures are marked with a color code in the respective chapters of this guide:
Purpose of this guide
Lab procedure
Prosthetic procedure
3
The Straumann
Bone Level Implant provides you with a solution for all bone level treatments, with Straumann expertise
and quality built in. The implant design is based on the latest technology and scientific research in implant dentistry.
Straumanns bone level implant respects five key biological principles, is designed to provide predictable esthetic results
and offers simple handling in a variety of indications.
1. STRAUMANN
BONE LEVEL IMPLANT

CONFIDENCE AT BONE LEVEL
Bone Control Design
The unique Bone Control Design
is
based on key biological principles and
thorough scientific research to support
crestal bone preservation and stable
soft tissue margins. It features the follow-
ing strengths:
Fast osseointegration with the
SLActive
surface technology
Transmission of forces into the bone
through the biomechanical implant
design
Consideration of the biological
distance with a horizontal distance
of microgap to bone
Minimal micromovement through a
conical connection
Consistent Emergence Profiles
The prosthetic components of the
Straumann
Bone Level implant line are

designed to facilitate highly esthetic res-
torations that mimic natural teeth. These
implant line components, designed to
match the abutment profiles, allow you
to easily attain esthetic results through
soft tissue management.
CrossFit Connection
The prosthetic connection is intuitive,
self-guiding and easy to grasp. The
CrossFit
Connection:
Provides a clear-cut insertion through
the guidance by 4 grooves and the
deep, conical connection
Prevents rotation through orthogonal
fit between implant and abutment
Gives prosthetic flexibility with
mechanical long-term stability
through its conical connection
1. Straumann
Bone Level Implant Straumann expertise applied at bone level

Consistent Emergence Profiles
Experience simplified soft tissue
management from start to finish
Bone Control Design
Designed to optimize crestal bone pres-

ervation though adherence to biological
principles
CrossFit
Connection
Feel the fit of the self-guiding connection
4
2. GENERAL INFORMATION
2.1 CrossFit CONNECTION
The Straumann
Bone Level Implant features an intuitive im-

plant-abutment connection that is self-guiding and designed
to enable simple positioning. The new connection is de-
signed to allow clear-cut insertion with all components to
provide outstanding protection against rotation, as well as
long-term stability.
Precision and simplicity: 4 grooves
The CrossFit
Connection features 4 grooves for

the repositioning of prosthetic components. This configuration
is designed for:
simple implant alignment
clear-cut and guided component insertion
flexibility in the placement of angled prosthetic
components
designed to prevent rotation by
orthogonal implant-abutment fit
Figure 1: The internal connection viewed from above
shows the 4 internal grooves.
Figure 2: Abutment insertion, step 1.
The abutment is placed on the 4 grooves in the implant.
2. General information
5
Figure 3a: Abutment insertion, step 2.
The abutment is turned until it is aligned with the 4 implant
grooves.
Figure 3b: Abutment insertion, step 3.
The abutment then falls into its final position.
Figure 4: The CrossFit

connection provides an orthogonal
fit between the implant and abutment.
Reliability and flexibility: Conical connection
The CrossFit
Connection features a cone with improved mechanical properties,

providing more flexibility for prosthetic treatments.
The conical prosthetic connection provides:
reduced micromovements and minimized microgap
outstanding mechanical stability and optimized stress distribution
exact implant-abutment fit
simplified impression taking with divergently positioned implants

Multi-Base Abutment
6
Gold Abutment, for crown
2.2 PROSTHETIC OPTIONS
Single crown
Screw-retained
Cement-retained
Anatomic Abutment
Meso Abutment
CAD/CAM Customized Ceramic
Abutment
Abutment
CAD/CAM Customized Titanium
Abutment
Cementable Abutment
Bridge
Screw-retained
Cement-retained
Anatomic Abutment
Meso Abutment
Gold Abutment, for bridge
Abutment
CAD/CAM Customized Titanium
Abutment
Cementable Abutment

Multi-Base Abutment
7 2. General information
Removable overdenture
Abutment for Bar, Gold
Abutment for Bar, Titanium
Bar
Gold Abutment, for bridge Customized bar
Anatomic Abutment
Meso Abutment
Telescope
LOCATOR
Abutment
Retentive anchor
8
Anatomic
Abutment
Meso
Abutment
Gold Abutment,
for crown
Gold Abutment,
for bridge
CAD/CAM
Customized Ceramic
Abutment
CAD/CAM Cus-
tomized Titanium
Abutment
Cementable
Abutment
Multi-Base
Abutment
Abutment for
Bar, Gold
Abutment for
Bar, Titanium
LOCATOR

Abutment
Single crown
Screw-retained
Cement-retained
Bridge
Screw-retained
Cement-retained
Telescope
Bar
Impression
Implant level
Abutment level
Material* Titanium Titanium Ceramicor
Ceramicor
Zirconia Titanium Titanium Titanium alloy Ceramicor
Titanium Ti alloy
Page 42 42 49 61 71 71 81 96 114 114 124
*See information on sterilization conditions on page 148.
2.3 ABUTMENT OVERVIEW

Ceramicor
is a registered trademark of Cendres & Mtaux SA

(Biel-Bienne, Switzerland)
9
Anatomic
Abutment
Meso
Abutment
Gold Abutment,
for crown
Gold Abutment,
for bridge
CAD/CAM
Customized Ceramic
Abutment
CAD/CAM Cus-
tomized Titanium
Abutment
Cementable
Abutment
Multi-Base
Abutment
Abutment for
Bar, Gold
Abutment for
Bar, Titanium
LOCATOR

Abutment
Single crown
Screw-retained
Cement-retained
Bridge
Screw-retained
Cement-retained
Telescope
Bar
Impression
Implant level
Abutment level
Material* Titanium Titanium Ceramicor
Ceramicor
Zirconia Titanium Titanium Titanium alloy Ceramicor
Titanium Ti alloy
Page 42 42 49 61 71 71 81 96 114 114 124

10
Connection Implant Instruments Implant Closure screw Healing abutment Impression post Implant analog Temporary
abutment
Secondary part
abutment
Narrow CrossFit

(NC)
3.3 mm
Regular CrossFit

(RC)
4.1 mm
4.8 mm
Laser marked (NC/RC)

Color-coded
Screw head Screw head
2.4 CODING
The Straumann
Bone Level Implant line is color-coded and contains laser markings, enabling quick and precise identifica-
tion of secondary parts, surgical instruments and auxiliaries. This concept simplifies the communication between all individu-
als involved in the treatment process.
The following scheme illustrates the above mentioned approach:
11
Connection Implant Instruments Implant Closure screw Healing abutment Impression post Implant analog Temporary
abutment
Secondary part
abutment
Narrow CrossFit

(NC)
3.3 mm
Regular CrossFit

(RC)
4.1 mm
4.8 mm
Laser marked (NC/RC)

Color-coded
Screw head Screw head
12
3. PREOPERATIVE PLANNING
Careful treatment planning is of utmost importance. A comprehensive pre-implan-
tation diagnosis, evaluation and plan are an absolute prerequisite to ensure treat-
ment success. The implant forms the apical extension of the restoration and serves
as the planning basis for the surgical procedure, ultimately achieving a specific
prosthetic result. Close communication between the patient, dentist and dental
technician is imperative to achieve excellent implant-borne restorations.
3.1 WAX-UP/SET-UP
To determine the topographical situation, axial orientation
and choice of implants, making a wax-up/set up using the
previously prepared study cast is recommended. Subse-
quently, the type of superstructure can be defined. The wax-
up/set-up can later be used as the basis for a custom-made
X-ray or drill template and for a temporary restoration.
Abutments should always be loaded axially. Ideally, the
long axis of the implant is aligned with the cusps of the
opposing tooth. Extreme cusp formation should be avoided
as this can lead to unphysiological loading.
3.2 X-RAY TEMPLATE WITH REFERENCE SPHERES
To accurately determine bone availability, the use of an X-
ray template with X-ray reference spheres is recommended.
First, mark the proposed implant positions on the study cast.
Then, fix the X-ray reference spheres at the marked points
and make the vacuum-formed template with the spheres. The
subsequently taken X-ray or computer tomography (CT) scan
provides information on bone availability, quality and muco-
sal thickness. Based on these properties, the exact implant
positions, number of implants, diameters and lengths can be
determined.
The X-ray reference sphere has a diameter of
5 mm. The image of the sphere on the X-ray
provides the reference value for the magnifica-
tion scale.
3. Preoperative planning
13
3.3 CUSTOM-MADE DRILL TEMPLATE
A custom-made drill template can facilitate planning and the preparation of the implant bed and enables precise use of the
cutting instruments. The desired prosthetic result should serve as the focus throughout all treatment planning stages.
With these components, a surgical drill template can be produced in the usual manner:
Art. No. Article Dimensions
049.810V4 Drill sleeve with collar height 10 mm
outside 3.5 mm
inside 2.3 mm
049.818V4 Stepped pin for 049.810 height 16 mm
2.2/3.5 mm
049.816V4 Pin for 049.810 height 16 mm,
2.2 mm
2.2 mm
3.5 mm
The Straumann brochure Basic information on the surgical procedure with the Straumann
Dental Implant
System (USLIT 100) contains two fabrication methods with step by step instructions.
Vacuum-formed template with integral pins as
X-ray reference
Vacuum-formed template with integrated drill
sleeve as drilling template
3. Preoperative planning
14 3. Preoperative planning
Art. No. Article Dimensions Material
040.526 Thermoplastic drill templates set, single tooth, contents:
Thermoplastic drill template for
single-tooth sites (V5)
sleeve height 10 mm,
inner 2.3 mm
titanium/
polymer
Guide pin (V5) length 20 mm, 2.3 mm stainless steel
Drill for dental laboratory 2.3 mm steel
040.527 Thermoplastic drill templates set, free-end situation, contents:
Thermoplastic drill template for
free-end situations (V5)
sleeve height 10 mm,
inner 2.3 mm
titanium/
polymer
Guide pin (V5) length 20 mm, 2.3 mm stainless steel
Drill for dental laboratory 2.3 mm steel
V5 = 5 components per pack
3.4 THERMOPLASTIC DRILL TEMPLATE
Drill a hole in the previously determined implant position and axis in the plaster anatomic cast. Then in-
sert the pin into the prepared site in order to check the implant position. Subsequently, heat the template
in water until it is soft and transparent. Place the template on the guide pin and press it onto the plaster
teeth. After it has cooled and been disinfected, the thermoplastic drill template determines exactly how the
pilot drill ( 2.2 mm) is to be guided.
Drill hole template for single tooth situation Drill hole template for free end situation
15

Healing Abutment
Prefabricated healing abutment
(titanium)
p. 1618
Customizable healing abutment
(polymer)
p. 1920
Temporary Abutment
(polymer with titanium inlay)
p. 2127
The Straumann
Bone Level Implant line emphasizes esthetic considerations, offering tailor-made solutions
that allow for natural soft tissue shaping and maintenance in a variety of indications. A versatile portfolio
of healing and temporary abutments is available, including customizable products made of polymer for
easy and quick processing.
4. SOFT TISSUE MANAGEMENT

4.1 SOFT TISSUE MANAGEMENT SOLUTIONS
4. Soft tissue management
X
16
4.2 PREFABRICATED HEALING ABUTMENT
Intended use
Soft tissue management
Closure of implant connection for submerged and non-submerged healing
Characteristics
Simple
One-piece design
Color-coded and laser-marked
Anatomically shaped emergence profiles, matching impression post and final
abutments
Reliable
CrossFit
connection
Prosthetic procedure: p. 1718
1
2
17
4.2.1 Prefabricated Healing Abutment Prosthetic procedure
Step 1 Insertion
Insert the healing abutment with the SCS screwdriver. The
friction fit secures the healing abutment to the instrument
during insertion and ensures safe handling.
Hand-tighten the healing abutment. The cone-in-cone
design provides a tight connection between the two
components.
Step 2 Wound closure
Adapt the soft tissue and suture it back tightly around the
abutment.
18
The bottle-shaped healing abutment pre-shapes the soft tis-
sue by allowing for a slight excess of mucosa to accumulate
during healing. The insertion of the final restoration pushes
the formed tissue outward, supporting the creation of natu-
rally shaped peri-implant soft tissue.
Optional: Bottle-shaped and customizable healing abutment
The customizable healing abutment allows for individual soft
tissue management.
Note
Do not use the customizable healing abutment for longer
than 6 months.
Healing abutments are delivered non-sterile and must be
sterilized prior to use (see instructions, p. 148).
X
19
4.3 CUSTOMIZABLE HEALING ABUTMENT
Intended use
Individual soft tissue management for esthetic cases
Closure of implant connection during healing phase
Characteristics
Simple
Polymer material allows for easy and quick chair-side modification
Easy to achieve esthetics due to gingiva-colored and modifiable polymer
material
Reliable
CrossFit
Connection
Note
Do not use in the mouth for longer than 6 months
1a
1b
20
4.3.1 Customizable Healing Abutment Prosthetic procedure
Step 2 Insertion
Hand-tighten the healing abutment in the implant with the
SCS screwdriver and temporarily seal the screw channel
(e.g., with composite).
Step 1 Customizing
Individualize the healing abutment on an analog, in
accordance with the mouth situation. Heatless wheels and
new cross-toothed millers are recommended for grinding.
p To avoid smearing of the polymer, adjust the bur
speed properly (low rpm number, minimal pressure).
X
X
21
4.4 TEMPORARY ABUTMENT
Intended use
Individual soft tissue management for esthetic cases
Screw- or cement-retained temporary crowns
Cement-retained temporary bridges
Characteristics
Simple
Polymer material allows for easy and quick chair-side modification
Easy to achieve esthetics due to tooth-colored and modifiable polymer material
Reliable
Precise fit and high stability due to reinforcement with titanium inlay
CrossFit
Connection
Note
Do not use in the mouth for longer than 6 months
Place temporary restoration out of occlusion
The NC temporary abutment may be modified by a maximum of 6.0 mm verti-
cally and 0.5 mm laterally. The RC temporary abutment may be modified by a
maximum of 6.0 mm vertically and 1.0 mm laterally.
Lab procedure: p. 2227
1a
1b
22
4.4.1 Temporary Abutment Procedure
Option A: Screw-retained temporary crown
Step 1 Customizing
Individualize the temporary abutment on an analog, in
To avoid smearing of the polymer, adjust the bur speed
properly (low rpm number, minimal pressure).
Note
For optimal adhesion of the temporary veneering material,
roughen or sandblast the upper section of the abutment or
integrate a means of retention.
Lab procedure
2a
2b
2c
2d
23
Step 2 First insertion
Hand-tighten the temporary abutment in the implant/
implant analog with the SCS screwdriver and temporarily
seal the screw channel (e.g., with cotton).
Lab procedure
p Use a standard technique to fabricate the temporary
restoration (e.g., prefabricated crown form or vacuum-
formed sheet technique, as shown here).
3
4
24
Step 3 Finishing
Remove excess acrylic, reopen the screw channel and
finish the temporary restoration.
Step 4 Final insertion
Clean the polished temporary restoration, place it on
the implant and tighten the screw with a torque between
15 Ncm and 35 Ncm using the SCS screwdriver, along
with the ratchet and the torque control device (see instruc-
tions in chapter 7.5, p. 146).
Cover the screw head with absorbent cotton or gutta
percha and seal the screw channel with temporary
veneering material (e.g., composite).
Lab procedure
1a
1b
25
Option B: Cement-retained temporary crown
Step 1 Customizing
Individualize the temporary abutment on an analog, in
To avoid smearing of the polymer, adjust the bur speed
properly (low rpm number, minimal pressure).
Note
For optimal adhesion of the cement-retained temporary
crown, roughen or sandblast the upper section of the
abutment.
Lab procedure
2a
2b
26
Step 2 Fabricating the cement-retained temporary
single crown
Use a standard procedure to fabricate the cement- retained
single crown (e.g., grind out a prefabricated plastic tooth).
Lab procedure
3a
3b
4
27
Step 3 Placing the customized abutment
Place the abutment on the implant and tighten the screw
with a torque between 15 Ncm and 35 Ncm using the
SCS screwdriver, along with the ratchet and the torque
control device (see instructions in chapter 7.5, p. 146).
Cover the screw head with absorbent cotton or gutta
percha and seal the screw channel temporarily (e.g., with
absorbent cotton).
Step 4 Cementing the temporary single crown
Coat the internal configuration of the crown with tempo-
rary cement and cement it on the temporary abutment.
Lab procedure
28
5. IMPRESSION TAKING
5. Impression taking

Open tray technique Closed tray technique
5.1 OPTIONS FOR IMPRESSION TAKING
Impressions for the Straumann
Bone Level Implant can be taken by either of the following two

procedures:
Straumann
Bone Level Implant

The technique used depends upon the users preference and the clinical situation. Both techniques are
described in the following chapters.
p. 2932 p. 3336
X
X
29 5. Impression taking
5.2 OPEN TRAY IMPRESSION
Intended use
Open tray impression technique
Characteristics
Simple
Color-coded components correspond to prosthetic connection
Slender emergence profile accommodates space limitations
Guide screw can be tightened by hand or with the SCS screwdriver
Reliable
High precision impression components replicate the intraoral situation
Clear-cut tactile response from the prosthetic connection verifies proper seating
of components
Note
Open tray impression procedure requires a custom-made tray with perforations.
Impression posts are intended for single use only, to ensure optimal fit and
precise impression taking for each patient.
1
30
5.2.1 Open tray impression Prosthetic procedure
Step 1 Positioning the impression post
Ensure sufficient access to the implant site in order
to avoid pinching of the gingival tissue. Be aware
that the sulcus may collapse rapidly once the healing
components have been removed.
Clean the internal configuration of the implant thoroughly
prior to the impression procedure.
Place the impression post accurately into the implant and
hand-tighten the guide screw.
In situations where occlusal space is limited, the length of
the impression post can be reduced by one retention ring
after the guide screw has been removed.
2c
2d
2a
2b
p Uncover the screws before the material is cured.
p Once the material is cured, loosen the guide screws
and remove the tray.
Step 2 Impression taking
Make perforations in the custom-made impression tray
(light cured resin) according to the individual situation so
that the positioning screw of the impression post sticks out.
p Take the impression using an elastomeric impression
material (polyvinyl siloxane or polyether rubber).
Note
Due to its low tensile strength, hydrocolloid is not suitable for
this application.
1a
1b
1c
2
32
5.2.2 Open tray impression Lab procedure
Step 2 Fabricating the master cast
Fabricate the master cast using standard methods and
type 4 dental stone (DIN 6873). A gingival mask should
always be used to ensure that the emergence profile of
the crown is optimally contoured.
Note
When tightening the screw, grasp the retentive section of the
analog securely to prevent the impression post from rotating.
This step is especially important when dealing with a short-
ened post.
Lab procedure
Step 1 Analog repositioning and fixing
Reposition and fix the analog in the impression using the
guide screw. To avoid inaccuracies when connecting, the
analog must be positioned exactly in line with the grooves
of the impression post before screwing in.
X
X
5.3 CLOSED TRAY IMPRESSION
Intended use
Closed tray impression technique
Characteristics
Simple
Color-coded components correspond to prosthetic connection
Slender emergence profile to accommodate space limitations
No additional preparation (i.e., perforation) of impression tray required
Reliable
High precision impression components replicate the intraoral situation
Clear-cut tactile response from the prosthetic connection verifies proper seating
of components
Note
Impression posts are intended for single use only, to ensure optimal fit and precise
impression taking for each patient.
1a
1b
34
5.3.1 Closed tray impression Prosthetic procedure
p Place the polymer impression cap on top of the
fixed impression post. Ensure that the color of the
cap corresponds to the color of the positioning screw
in the post and that the arrows are aligned in a
p buccal-lingual direction.
p Push the impression cap in an apical direction until it
clicks. The impression cap is now firmly seated on the
impression post.
Step 1 Positioning the impression post
Ensure sufficient access to the implant site in order
to avoid pinching of the gingival tissue. Be aware
that the sulcus may collapse rapidly once the healing
components have been removed.
Clean the internal configuration of the implant thoroughly
prior to the impression procedure.
Place the impression post accurately into the implant and
hand-tighten the guide screw with the SCS screwdriver.
Note
Ensure that the lateral planar areas of the post are facing
mesial and distal.
2a
2b
2c
35
Take the impression using an elastomeric impression
Note
Due to its low tensile strength, hydrocolloid is not suitable for
this application.
Once the material is cured, carefully remove the tray.
The impression cap remains in the impression material and
therefore is automatically pulled off from the impression
post with the removal of the tray.
Unscrew and remove the impression post and send it with
the impression tray to the dental technician.
1a
1b
1c
2
36

5.3.2 Closed tray impression Lab procedure
Fabricate the master cast using standard methods and a
type 4 dental stone (DIN 6873). A gingiva mask should
always be used to ensure that the emergence profile of
Lab procedure
Step 1 Analog fixing and impression post
repositioning
Mount the impression post onto the analog using the
guide screw. To avoid inaccuracies when connecting, the
analog must be positioned exactly in line with the grooves
of the impression post before screwing it in.
Note
Ensure that the color code of the guide screw corresponds
to the color code of the analog, and that the color code of
the analog corresponds to the color code of the polymer
cap in the impression material.
Reposition the impression post in the tray.
Gently push the impression post until you feel the tactile
response of engagement. It is now firmly seated on the
impression cap in the impression tray.
1
Step 1 Insertion
Insert the bite registration aids into the implants. Each com-
ponent is fitted with a snap mechanism that holds it in the
internal configuration.
Note
Protect the components against aspiration (e.g., use a
throat pack or a thread).
5.4 BITE REGISTRATION
To simplify bite registration after impression taking, plastic bite registration aids are available in various heights.
For repositioning on the master cast, the bite registration aids have a flat side laterally.
2b
3
2a
38
Step 3 Positioning
To transfer the bite, put the bite registration in the analogs
on the master cast. Fix the bite wax model and mount the
maxilla and mandible casts on the articulator.
Step 2 Shortening
Shorten the bite registration aids (if needed) and apply
the bite registration material. To ensure the repositioning
from the mouth to the master cast, the occlusal area and
the lateral flat side of the bite registration aids must be
adequately surrounded with the registration material.
Note
Bite registration aids must be shaped out of the mouth. If
they need to be shortened occlusally due to lack of space,
ensure that the lateral flat side is not ground off.
X
X
39
6.1 CrossFit PLAN SET/PLAN ABUTMENT
Intended use
Intra- and extra-oral planning of prosthetic restoration
Characteristics
Simple
Color-coded, well-marked and easily identifiable PLAN abutments
Comprehensive PLAN set contains all PLAN abutments arranged clearly
Easy handling with the SCS screwdriver
Reliable
Proper seating of PLAN abutments verified through the clear-cut response from
the prosthetic connection
PLAN abutments fabricated of sterilizable polymer material
Note
Clean and moist-heat sterilize PLAN abutments after intra-oral use
Do not g-sterilize PLAN abutments
Do not sterilize the cassette
6. RESTORATION
6. Restoration
1a
1b
2
40 6. Restoration
6.1.2 CrossFit PLAN Set/PLAN abutment selection
Step 2 Ordering the stock abutment
Once the most accurate fit of the PLAN abutment is deter-
mined, order the corresponding stock abutment (titanium,
gold) using the allocation chart on the PLAN set inlay
card.
Step 1 Selecting the right abutment
Open the PLAN set, pick up a PLAN abutment and secure
it with the SCS screwdriver (empty mold for instruments
built in).
Place the PLAN abutment on the implant (intra-oral use)
or implant analog (extra-oral use). Check dimensions (rings
on PLAN abutments indicate gingiva height), axial align-
ment and screw axis of the potential restoration.
The Straumann
CrossFit PLAN Set allows for specified planning of the restoration in the mouth and on the model, provid-
ing the dentist and the dental technician great flexibility in cooperative planning and minimizes the quantity of stock abut-
ments. The PLAN set contains all PLAN abutments available for the Straumann
Bone Level Implant (anatomic, cementable,

gold, and LOCATOR

).
Lab procedure

41
6.1.3 Cleaning and sterilizing PLAN abutments
Clean the PLAN abutments thoroughly with water or ethanol after intra-oral use.
After cleaning, moist-heat sterilize (autoclave) PLAN abutments for 18 minutes at 134 C (273 F).
Refer to the manufacturers specifications for the heat-sterilization device.
Note
Do not sterilize PLAN abutments more than 20 times
Do not g-sterilize PLAN abutments
Do not sterilize the cassette
6. Restoration
X
X
42
6.2 ANATOMIC (AND MESO) ABUTMENT
Intended use
Cement-retained restorations
Characteristics
Simple
Less grinding necessary due to prepared mucosa margins
Adaptation to natural soft tissue contour due to prepared mucosa margins in
different heights
Oval shape resembles emergence profile of a natural tooth
Reliable
CrossFit
Connection
Note
Not suitable for direct ceramic veneering
A minimum height of 3.0 mm above the mucosa margin of the abutment must
be maintained in order to maintain proper stability of the abutment
The cement margin must not be more than 2.0 mm below the mucosa
Use a new basal screw for the final insertion of the abutment
6. Restoration
1a
1b
1c
43 6. Restoration
6.2.1 Anatomic (and Meso) Abutment Lab procedure
The following case describes the fabrication of a cement-retained single crown by using the anatomic abutment.
6. Restoration
Lab procedure
Step 1 Fabricating the master cast and wax-up
Fabricate the master cast, including a gingiva mask with
the corresponding implant analog (see instructions in
chapter 5, p. 28).
For optimal esthetic planning, model a full anatomical
wax-up.
Make a silicone key over the full wax-up in order to define
the optimal shape of the customized abutment.
2a
2b
44
Step 2 Preparing the Anatomic or Meso Abutment
The anatomic abutment and the meso abutment (p. 45)
consist of titanium and can be modified as required.
Note
To maintain proper stability of the abutment, a minimum
height of 3 mm above the mucosa margin of the abutment
must be maintained.
Modify the anatomic abutment on a polishing aid.
The modified anatomic abutment is placed in the master
cast.
6. Restoration
Lab procedure
2c 2d 2e
45
If the anatomic abutment does not fit your individual demands or if you prefer grinding the mucosa margins yourself, you can
use the meso abutment. The processing of the meso abutment corresponds to the steps of the anatomic abutment.
6. Restoration
Lab procedure
3
46
Step 3 Fabricating the superstructure
Fabricate the superstructure on the modified abutment using
standard modeling, casting and veneering methods.
Place the modified abutment on the polishing aid/analog
and hand-tighten the screw using the SCS screwdriver.
Wax an individual resin cap onto the abutment.
Contour a wax model according to the anatomical
circumstances of the individual cast.
Check the wax-up with the silicone key.
6. Restoration
Lab procedure
4a
4b
47
Step 4 Casting and veneering
Cast the framework using the standard casting methods.
Check the framework with the silicone key before
veneering.
Veneer the superstructure.
6. Restoration
Lab procedure
48 6. Restoration
6.2.2 Anatomic Abutment Prosthetic procedure
Position the cleaned abutment in the implant. Tighten the
screw with 35 Ncm using the SCS screwdriver along with
the ratchet and the torque control device (see instructions
in chapter 7.5, p. 146).
Close the SCS configuration of the screw with cotton
and sealing compound (e.g., gutta percha). This allows a
later removal of the anatomic abutment in case a crown
replacement is required.
Cement the superstructure to the abutment.
Remove superfluous cement.
The final restoration is delivered to the doctors office on the
master cast.
Step 1 Preparation
Remove the healing cap or temporary restoration.
Remove the superstructure from the master cast and
unscrew the abutment from the analog.
Clean and dry the interior of the implant and the
abutment thoroughly.
X
X
49
6.3 GOLD ABUTMENT FOR CROWN
Intended use
Screw-retained or cement-retained crowns
Cement-retained bridges via mesostructure (custom abutment technique)
Characteristics
Simple
Easy wax-up and protection of the screw channel due to modeling aid
(burn-out polymer)
Easy-to-achieve esthetics due to individual contouring of the emergence
profile and adaptation to the margin of the gingival contour
Reliable
Superfluous cement easily removable by raising the cement margin by an
individually designed mesostructure
CrossFit
Connection
Note
Not suitable for direct splinting with other gold abutments. For screw-retained
bridges, the gold abutment for bridge must be used (see instructions in chapter
6.4, p. 61).
Use a new basal screw for the final insertion of the abutment.
Do not shorten the gold abutment for crown by more than 1.5 mm.
6. Restoration
1a
1b
1c
50
6.3.1 Gold Abutment for crown Lab procedure
The following case describes the fabrication of a cement-retained single crown by utilizing the custom abutment technique.
Fabricate the master cast, including a gingiva mask with
the corresponding implant analog (see instructions in
chapter 5, p. 28).
wax-up.
6. Restoration
Lab procedure
2c
2a
2b
2d
51
Step 2 Preparing the Gold Abutment
Place the gold abutment on the analog and hand-tighten
the screw using the SCS screwdriver.
Shorten the modeling aid to the height of the occlusal
plane according to the individual circumstances. Working
with the modeling aid ensures a clean and sharp-edged
finish of the screw channel.
Attach the gold abutment to the polishing aid for easier
handling during manipulation outside of the model.
6. Restoration
Lab procedure
3d
3a
3b
3c
52
Step 3 Wax modeling
Contour a wax-up shape according to the individual
anatomical situation. The silicone key shows the exact
space for the cement-retained crown, which will be made
over the customized abutment.
Make sure that the wax layer on the abutment is
sufficiently thick (at least 0.7 mm). Do not cover the
delicate margin of the abutment with wax.
Note
The picture displays the optimal configuration of a custom-
ized abutment, showing an ideal emergence profile. This
configuration ideally adapts the crown contours to the
margin of the gingival contour. For hygiene purposes, the
cement margin must not be more than 2.0 mm below the
gingival level.
6. Restoration
Lab procedure
4
53
Step 4 Investment
Invest the customized abutment according to standard
methods without using wetting agents.
Note
In order to avoid overflow of the cast-on alloy, thoroughly
clean the abutment prior to investment (removal of wax
particles, insulating agents with a cotton pellet or brush
moistened with alcohol).
Always do the cast with the modeling aid. Otherwise,
the dental casting alloy will not or only minimally flow out at
the upper coping rim.
Ensure that there is no wax on the delicate margin.
The use of investment materials for rapid heating methods
(speed investment materials) is not recommended.
When processing the investment material, follow the
manufacturers instructions. Observe the recommended
mixing ratio and preheating time exactly.
6. Restoration
Lab procedure
5b
5a
5c
54
Step 5 Casting and devestment
Cast the customized abutment.
Gently devest the customized abutment with ultrasound,
water jet, pickling acid or a glass fiber brush.
Note
For the devestment of the gold abutment with sandblast-
ing (maximum pressure: 2 bars; maximum alumina particle
size: 50 m), the inner configuration must be protected from
infiltration with sand with the polishing aid.
p The wax-fixed polishing aid allows better fixation and
protects the pre-polished part of the gold abutment.
6. Restoration
Lab procedure
5e
5d
55
p The gold abutment following sandblasting.
Note
Do not sandblast the inner configuration of the gold
abutment.
6. Restoration
Lab procedure
6a
6b
7a
56
Step 6 Polishing
After trimming, polish the finished customized abutment.
The customized abutment is now ready for the fabrication
of the cement-retained single crown.
6. Restoration
Lab procedure
Step 7 Fabricating the cement-retained single crown
Block out the screw channel and wax the framework
directly over the customized abutment.
The silicone key shows the spatial relations for the
restoration.
7b
7c
57
p Cast the framework in the conventional manner. After
trimming the cast, the metal crown fits precisely on the
customized abutment.
6. Restoration
Lab procedure
p The silicone key shows the spatial relations for
p veneering.
p Veneer the superstructure.
58 6. Restoration
Lab procedure
Note
The long-term success of the prosthetic work depends upon
the accurate fit of the restoration.
The entire procedure must repeated if
trimming through the cast-on alloy prohibits the Ceramicor

surface from being covered with ceramic veneering material
(Ceramicor
is a non-oxidizing alloy and does not allow

ceramic bonding).
Ground down to
abutment level
Failed casting
Casting beads and
overflow of alloy
p the cast-on gold did not flow out entirely.
p intruded casting metals and casting pearls cannot be
removed from the connection part of the gold abutment.
Casting errors and incorrect handling
59 6. Restoration
Lab procedure
Using alloys with castable Ceramicor
components
Ceramicor
is only suitable for cast-on procedures

Ceramics cannot be bonded directly to cast-on Ceramicor
components as this
alloy does not form bonding oxides.
When selecting the casting alloy, ensure that it is compatible with the high-fusing
alloy of the Ceramicor
components. The melting range of the casting alloy must

not exceed a liquidus temperature of 1350 C/2462 F.
Ceramicor
must not be cast on with base metal casting alloys because gold, in
combination with nickel or cobalt, destroys the components.
Suitable dental casting alloys:
High noble alloys
Precious metal alloys with a minimum content of gold and platinum group
metals of 25%
Palladium-based alloys with a minimum content of palladium of 50%
ISO standard alloy types
Alloy types according to the following ISO standards are suitable for cast-on
procedures to the prefabricated Ceramicor
component:
ISO standard 9693
ISO standard 1562
ISO standard 8891
Note
The alloy manufacturers recommendation must be followed. Due to diffusion at
the alloy and the cast-on coping interface, components made from an unsuitable
alloy may form phases with low-strength, reduced corrosion resistance or a lower
melting range.
Ceramicor
is a registered trademark of Cendres & Mtaux SA

(Biel-Bienne, Switzerland).
60 6. Restoration
6.3.2 Gold Abutment for crown Prosthetic procedure
Step 1 Preparation
Remove the superstructure from the master cast and
unscrew the abutment from the analog.
Clean and dry the interior of the implant and the
abutment thoroughly.

Option B: Cement-retained crown
screw with 35 Ncm using the SCS screwdriver, along
with the ratchet and the torque control device (see instruc-
tions in chapter 7.5, p. 146).
Close the SCS configuration of the screw with cotton and
sealing compound (e.g., gutta percha or composite).
This allows later removal of the customized abutment in
case a crown replacement is required.
Cement the crown to the mesostructure and remove
superfluous cement.
Option A: Screw-retained crown
screw with 35 Ncm using the SCS screwdriver along with
sealing compound (e.g., gutta percha or composite).
This allows later removal of the customized abutment in
case a crown replacement is required.
The final restoration is delivered to the doctors office on the master cast.
Note
The picture displays the optimal configuration of a
customized abutment, showing an ideal emergence profile.
This configuration ideally adapts the crown contours to
the margin of the gingival contour. For hygiene purposes,
the cement margin must not be more than 2.0 mm below
the gingival level.
X
X
61
6.4 GOLD ABUTMENT FOR BRIDGE
Intended use
Screw-retained bridges
Screw-retained customized bar
Characteristics
Simple
Easy wax-up and protection of the screw channel due to modeling aid
(burn-out polymer)
Easy to achieve esthetics due to individual contouring of the emergence
profile and adaptation to the margin of the gingival contour
Reliable
No cement gap
One-screw solution
Note
Not suitable for single crowns. For single crowns, the gold abutment for crown
must be used (see instructions in chapter 6.3, p. 49).
Do not shorten the gold abutment for bridge by more than 2.5 mm.
6. Restoration

1b
1a
1c
62
Fabricate a master cast, including a gingiva mask with
the corresponding analogs (see instructions in chapter 5,
p. 28).
wax-up.
Make a silicone key over the full anatomical wax-up
in order to define the optimal shape of the customized
bridge.
6. Restoration
6.4.1 Gold abutment for bridge Lab procedure
The following case describes the planning of a screw-retained bridge.
Lab procedure
2b
2a
2c
63
Step 2 Preparing the gold abutments
Place the gold abutments for bridge on the analogs and
hand-tighten the screws using the SCS screwdriver.
Shorten the modeling aids to the height of the occlusal
plane according to individual circumstances. Working
with the modeling aid ensures a clean and sharp-edged
finish of the screw channel.
To avoid a deformation of the conical design of the
connection, it is highly recommended to always attach the
gold abutment to the polishing aid while working outside
of the model.
6. Restoration
Lab procedure
3a
3b
64
Step 3 Wax modeling
Contour a wax-up shape according to the individual
anatomical situation.
delicate margin of the abutments with wax.

Check the spatial conditions before casting the bridge
framework with the silicone key of the wax-up.
6. Restoration
Lab procedure
4
65
Step 4 Investment
Check that the wax framework of the bridge is absolutely
tension-free before investing the framework.
Invest the bridge framework according to standard
methods without using wetting agents.
Note
clean the abutments prior to investment (removal of wax
6. Restoration
Lab procedure
5b
5a
5c
66
Step 5 Casting and devestment
Cast the bridge framework.
Note
The long term success of the prosthetic work depends upon
the accurate fit of the restoration. The entire procedure will
have to be repeated if casting errors occur (see examples
on p. 58).
Allow for enough cooling time of the casted bridge before
the devestment.
Gently devest the bridge framework with ultrasound,
water jet, pickling acid or a glass fiber brush.
For the devestment of the gold abutments with sandblast-
ing (maximum pressure: 2 bars; maximum alumina particle
size: 50 m), the inner configuration must be protected
from infiltration from sand with the polishing aid.
The wax-fixed polishing aid allows better fixation and
protects the pre-polished part of the gold abutments.
6. Restoration
Lab procedure
5e
5d
5f
67 6. Restoration
Note
To help ensure success of the restoration, a perfect prosthetic
fit in the internal connection of the implant is mandatory.
Take particular care not to let the bridge reconstruction fall
down onto any surface. The weight of the bridge construc-
tion might have a negative impact on the high precision con-
nection of the gold abutment. If the construction falls down
at anytime, repeat the entire procedure.
Do not sandblast the internal configuration of the gold
abutment.
Lab procedure
6b
6a
6c
68
Step 6 Preparation before veneering
Remove the sprues and smooth the removal areas.
Check the spatial conditions with the silicone key.
Control tension-free fitting on the master cast
(Sheffield test). If the bridge is not tension-free and
wiggles, cut the bridge and resplint it in a tension-free
manner.
6. Restoration
Note
In order to take the bridge off the master cast, all basal
screws need to be removed first.
Lab procedure
7
6d
69 6. Restoration
Step 7 Veneering
Lab procedure
p Do an additional try-on of the tension-free fit of the
framework in the mouth of the patient.
70
Step 1 Preparation
Remove the healing abutment or temporary restoration.
Remove the superstructure from the master cast and un-
screw the bridge from the analogs.
Clean and dry the interior of the implants and the
bridgework thoroughly.
Check the tension free fit of the bridgework before
tightening it in the mouth of the patient.
Note
In case of movements due to tensions in the bridgework, do
not insert the bridge.
Position the cleaned bridgework in the implants.
Tighten the screws with 35 Ncm using the SCS screw-
driver, along with the ratchet and the torque control de-
vice (see instructions in chapter 7.5, p. 146).
Close the SCS configuration of the screws with cotton and
sealing compound (e.g., gutta percha or composite). This
allows later removal of the bridge work if needed.
6. Restoration
6.4.2 Gold abutment for bridge Prosthetic procedure
The final restoration is delivered to the doctors office on the
master cast.
X
X
71
Intended use
Cement-retained crowns
Cement-retained bridges via mesostructure
Screw-retained crowns (ceramic abutments only)
Characteristics
Simple
Anatomic emergence profile
Fast scan and design process
Cost and time savings in the dental lab
Ideal cement finish line
Esthetic solution in thin mucosa
Reliable
Crossfit Connection
High performance materials
Biocompatability
6. Restoration
Prosthetic procedure: p. 76; 79-80
6.5 Customized CAD/CAM Abutment
etkon es1 scanner and software
The laser-driven etkon es1 system is designed to scan within
10 microns of accuracy, which allows image capturing on the
most difficult preps, whether they are angular or shoulder depth
chamfer preparations.
The software to check the prosthetic part of the abutment shape
is part of the etkon_visual 4 software and included with each
scanner purchase.
Abutment Wax-up Kit
The Abutment Wax-up Kit includes all analog holders needed
to design restorations for the Straumann
Dental Implant System.

Analog holders are needed to correctly scan the wax-ups of
the customized abutments.
Wax-up Sleeve
To model the abutment for the scan process, a wax-up sleeve
is required. A wax-up sleeve is included in each customized
abutment set.

72
6.5.1 Technical Requirements
To design Straumann
customized abutments, the dental lab needs the following components:

6. Restoration
1c
1a
1b
73
t ype 4 dental stone (DIN 6873). A gingival mask
should be used to ensure that the emergence profile of
For ideal esthetic planning, model a full anatomical
wax-up to the wax-up of the abutment.
Prepare a silicone key over the full wax-up to define
6. Restoration
6.5.2 Straumann Customized Abutment Lab procedure
Lab procedure
2a
2b
74
Step 2 Preparing the scan duplicate model
Insert a wax-up sleeve in the master cast.
Use the wax-up sleeve to model the desired shape of
the abutment.
Note
For an accurate scan, scannable wax must be used
(CopyCadWax from etkon).
6. Restoration
Lab procedure
3b
3a
wax-up sleeve
analog holder
scan pot
scan cylinder
75 6. Restoration
Step 3a Scanning the abutment
Fix the modified wax-up sleeve on the corresponding ana-
log holder.
Insert the analog holder into the scan pot.
Ensure the bolt on the analog holder is in line with the
white marking of the scan pot. This allows for proper po-
sitioning for the analog holder at the bottom of the scan
pot. Integrated magnets help locate the correct position.
Position the complete scan pot into the scan cylinder of
the es1 scanner.
Note
For an accurate scan, the wax-up sleeve must be positioned
correctly on the analog holder. With a correctly positioned
wax-up sleeve, there is no gap and no rotation between the
wax-up sleeve and the analog holder. To ensure optimal fit
and precision, wax-up sleeves are intended for single use
only.
Step 3b Scanning*
Close the cover of the scanner and follow the normal
scan instructions of the es1 scanner.
*Please refer to the CAD/CAM Abutment User Guide
(USLIT 242) to set up the es1 laser scanner.
Lab procedure
4
76
Step 4 Ordering the abutment
After you have scanned the abutment, you can order
your abutment directly via the etkon_visual 4 software.
After the data transmission is completed, an e-mail
confirmation is sent.
Once the abutment design has been verified, you will
receive an order confirmation.
6. Restoration
Note
Before the abutment is fabricated, the data is subjected to
an incoming inspection. If the data record is found to con-
tain errors or is incomplete, a message will be sent to you,
requesting corrections or additional information. A definitive
order confirmation will be sent after completing this step.

77 6. Restoration
Fabricating the abutment
Based on the nal and veried design data, the
customized abutment is manufactured in our Basel,
Switzerland production center.
The customized abutment is inspected for quality control
prior to delivery.
DHL Shipping Service is used to deliver the customized
abutments.
After the order has left the production center, you will re-
ceive a delivery notication e-mail with an order tracking
number. You can check the status of your order on DHLs
website, www.dhl.com.
6.5.3 Manufacturing and Delivery
Lab procedure
78 6. Restoration
Ceramic abutment
Straumann customized abutments made of zirconia diox-
ide have a thermal expansion coefficient of 10.5 x 10-
6/K (25C 500C, 77F 932F).
Fabricate a screw-retained crown with a ceramic syn-
chronized to the thermal expansion coefficient of zirconia
dioxide.
Note
Particular attention must be given to form an even layer of
porcelain veneered on the abutment.
Mount the ceramic abutment on the implant analog.
Use a standard procedure to fabricate the cement-
retained single crown.
Veneer the crown.
Titanium abutment
The procedure for the titanium abutment is the same as the
procedure for the cement-retained ceramic abutment, op-
tion B.
Note
Customized abutments are not sterile when delivered. Please
use the following procedure for sterilization before use:
Titanium Autoclave 134C (273F), 18 minutes
Ceramic Dry heat 160C (320F), 4 hours
6.5.4 Product Completion at the Dental Laboratory
Lab procedure
Option A: Screw - retained crown
Option B: Cement - retained crown
79 6. Restoration
6.5.5 Customized Abutments Prosthetic Procedures
Step 1 Preparation
Remove the superstructure from the master cast and un-
screw the abutment from the analog.
Clean and dry the inner joint of the implant and the abut-
ment thoroughly.
Insert the customized abutment.
Note
If the model contains more than one abutment, use transfer
aids.
Only tighten the screw using the SCS Screwdriver,
together with the ratchet and torque control device.
Never use cement when inserting the abutment into the
implant.
Straumann customized ceramic abutments made of zirco-
nia dioxide are not autoclavable and must not be cleaned
with a steam jet.
Follow recommended sterilization procedures.
80 6. Restoration
6.5.6 Customized Ceramic Abutment
Option A: Screw-retained crown
Position the ceramic abutment in the implant. Tighten the
with the ratchet and the torque control device.
and sealing compound (e.g., gutta percha). This allows
removal of the customized abutment should a crown
replacement be required.
Option B: Cement-retained crown
Position the ceramic abutment in the implant. Tighten the
sealing compound (e.g., gutta percha). This facilitates
removal of the customized abutment should a crown
replacement be required.
Note
Use only the special basal screws provided for the ceramic
abutment.
Customized titanium abutment
Cement-retained crown
Position the titanium abutment in the implant. Tighten the
sealing compound (e.g., gutta percha). This facilitates
removal of the customized abutment should a crown re-
placement be required.
Note
Direct ceramic veneering is not possible with a customized
titanium abutment. Use only the basal screws provided for
the titanium abutment.
81
6.6 Cementable abutment
Intended use
Cement-retained crowns and bridges
Characteristics
Simple
Flexible impression taking on implant or abutment level
Easy handling of prefabricated copings
Reduce adjustment work (e.g., height adjustment)
Easy choice of components thanks to color-coding
Reliable
CrossFit connection
Perfect fit due to prefabricated components
Proper fit of abutment level impression cap verified by clear-cut response
Note
Cement margin must be no more than 2.0 mm below the gingiva.
A minimum height of 3.0 mm above the mucosa margin of the abutment must
be maintained to ensure proper stability and retention of the restoration.

Lab procedure: p. 8992; 94
Prosthetic procedure: p. 82-88; 93; 95

GH
AH
4.0 mm
5.5 mm
1.0 mm
2.0 mm
3.0 mm
D
.
82 6. Restoration
6.6.1 Cementable abutment coding
Narrow CrossFit Regular CrossFit
Diameter (D) 3.5 mm
(blue coding)
5.0 mm
(yellow coding)
5.0 mm
(grey coding)
6.5 mm
(brown coding)
AH 4.0 mm
(black marking)
AH 5.5 mm
(white marking)
AH: Abutment height
GH: Gingiva height
1a
1b
83
Option A: Impression taking on abutment level Prosthetic procedure
Step 1 Abutment insertion
Select the appropriate size cementable abutment using
the PLAN set (see instructions in chapter 6.1, p. 39).
Thoroughly clean and dry the interior of the implant.
Position the abutment in the implant. Tighten the screw
to 35 Ncm using the SCS screwdriver, along with the
ratchet and the torque control device (see instructions in
chapter 7.5, p. 146).
6. Restoration
2
84
Step 2 Customizing the abutment
Make height adjustments according to the individual
situation. This can be done down to the bottom of the
black/white ring.
Note
The abutment level impression does not carry any informa-
tion of potential customizations. In this case, the abutment
level impression has to be taken without any auxiliaries. We
recommend taking the impression on implant level, and then
ask the technician to customize the abutment according to
the individual situation.
We recommend customizing the abutment right before the
final crown is integrated, if the spatial surroundings allow it
(no chewing forces against the abutment). Ask your dental
lab to supply you with a reduction coping.
6. Restoration
3a
3b
85
Step 3 Impression taking on abutment level
Click the impression cap onto the abutment.
The white ring on the abutment indicates the abutment
height (AH). It corresponds to the white arrow on top of
the impression cap and the white clicking mechanism
inside of the impression cap.
Note
Due to its low tensile strength, hydrocolloid materials are not
suitable for this application.
6. Restoration
p Take the impression using an elastomeric impression
4a
4b
86
6. Restoration
Chairside temporization of the abutment
Using the temporary coping
Step 4 Preparation
Snap the temporary coping onto the abutment in the
mouth of the patient.
Mark the appropriate height according to the individual
situation and shorten the coping as necessary.
If you intend to provisionalize a bridge, remove the
rotational feature of the temporary coping.
Note
Do not use Vaseline (aliphatic isolation agent) for insulation
of the abutment.
Temporary coping Protective cap
5a
5b
5c
87
6. Restoration
Step 5 Creating the provisional
Use a standard procedure to fabricate the provisional
(e.g., prefabricated crown form or vacuum-formed sheet
technique). The retention rings ensure proper mechanical
bonding of the veneering material to the coping. The
plateau of the coping helps to prevent the veneering
material from flowing under the abutment.
After the polymerization is completed, take the provisional
out of the mouth and place it on the analog.
Grind down and polish the emergence profile of the
coping and the restoration to achieve an even profile.
To avoid tissue irritation, the interface needs to be smooth
and flush with the restoration.
4
6
88
6. Restoration
Step 6 Inserting the provisional
sealing compound (e.g., gutta percha). This allows a later
removal of the provisional.
Apply temporary cement to the inner part of the coping
and cement it onto the abutment.
Note
The restoration must always be out of occlusion.
Use temporary cement in order to remove the temporary
restoration in due time.
Temporary copings must not be kept in the mouth longer
than 28 days.
Using the protective cap
Step 4 Cementing the protective cap
and sealing compound (e.g., gutta percha). This allows a
later removal of the provisional.
Apply temporary cement to the inner part of the
protective cap and cement it onto the abutment.
Note
Use temporary cement in order to remove the temporary
restoration in due time.
Protective caps can be kept in the mouth for up to 6 months.
1a
2
1b
89
Lab procedure
6. Restoration
Step 2 Preparation
Fabricate the master cast in a conventional manner
(see instructions in chapter 5, p. 28).
Model a full anatomical wax-up for optimal esthetic
planning. Use the corresponding burn-out coping as a
basis for this wax-up.
the optimal shape of the restoration.
Click the corresponding analog into the impression.
Note
Ensure that the color code of the analog corresponds to
the color code of the impression cap.
The white ring on the abutment indicates the abutment height
(AH). It corresponds to the white arrow on top of the impres-
sion cap and the white clicking mechanism inside of the
impression cap.
Lab procedure
3
90 6. Restoration
Step 3 Customizing
Depending on the individual situation, height adapta-
tions can be made without damaging the anti-rotational
grooves.
Customize the abutment portion of the analog according
to the individual situation.
Fabricate a reduction coping for the practitioner. This
will enable the precise transfer of the individualization
into the mouth of the patient.
Note
To ensure proper stability and retention of the restoration,
a minimum height of 3.0 mm above the mucosa margin of
the abutment must be maintained.
Lab procedure
4c
4d
4a
4b
91 6. Restoration
Step 4 Fabricating the crown
Select the burn-out coping and place it on the analog.
Shorten if necessary.
Fabricate the superstructure on the (modified) abutment
using standard modeling methods.
Lab procedure
5a
5b
5c
92 6. Restoration
Cast the framework using standard casting methods.
Adjust the framework so that it can be attached to
the analog. Remove the clamping ring using a circular
motion. Do not harm the rotational faces nor the exact
margin fit.
Lab procedure
1
93 6. Restoration
Remove the temporary restoration in a conventional
manner.
If necessary, do the required customization of the
abutment by using the reduction coping from the dental
technician.
Clean the abutment thoroughly and remove all remaining
temporary cement.
Cement the crown to the abutment and remove
superfluous cement.
2b
1
2a
94
Option B: Impression taking on implant level
Take the impression according to the instructions in chapter 5, p. 28.
Lab procedure
6. Restoration
Step 1 Inserting the abutment
Select the correct size cementable abutment by using the
PLAN set (see instructions in chapter 6.1, p. 39).
Hand-tighten the abutment on the analog in the master
cast.
Step 2 Customizing
Make height adaptations according to the individual
situation without damaging the anti-rotational grooves.
Note
To ensure proper stability and retention of the restoration, a
minimum height of 3.0 mm above the mucosa margin of the
abutment must be maintained.
Follow the corresponding steps as described for the
impression on abutment level (p. 85).
Apply the transfer aid and attach it to the adjacent teeth.
Deliver the customized abutment with the attached transfer
aid and the final restoration to the doctors office for
insertion.

Lab procedure
1
95 6. Restoration
screw to 35 Ncm using the SCS screwdriver, along with
Insert the abutment together with the transfer aid for a
better orientation.
and sealing compound (e.g., gutta percha). This later
allows removal of the abutment.
Cement the crown to the abutment and remove
superfluous cement.
96

6.7 Multi-Base Abutment
Intended use
Screw-retained bridges
Bar-retained implant-borne dentures in the mandible and maxilla
Characteristics
Simple
Flexible impression taking on implant or abutment level
Color-coded components for simple selection
Highly flexible due to 30 cone and low occlusal height
Reliable
CrossFit Connection
Ideal fit due to prefabricated components
Proper fit of abutment level impression cap verified by clear-cut response
Note
Do not use the multi-base abutment for single-tooth restorations.
Use new occlusal screws for the final insertion of the bar.
Prosthetic procedure: p. 98102, 111, 113
Lab procedure: p. 103110, 112
6. Restoration
97

GH
1.0 mm
2.5 mm
4.0 mm
D
D = Diameter GH = Gingiva Height
Multi-Base Abutment, angled 25
6.7.1 Multi-Base abutment coding
Multi-Base Abutment, straight
Diameter (D) 3.5 mm
(blue coding)
4.5 mm
(yellow coding)
4.5 mm
(grey coding)
6.5 mm
(brown coding)
6. Restoration
98
1a
1b
Use the PLAN set to choose the appropriate size of the
multi-base abutments (see instructions in chapter 6.1, p. 39).
Option A: Impression taking on abutment level Prosthetic procedure
Thoroughly clean and dry the interior of the implants.
Position the abutments in the implants. Tighten to 35 Ncm
using the SCS screwdriver along with the ratchet and the
torque control device (see instructions in chapter 7.5, p. 146).
Note
Do not modify the abutments.
6. Restoration
99
2a
2b
Step 2 Impression taking on abutment level
Click the impression caps or screw the impression posts
onto the abutments. Check the proper fit of the impression
cap by rotating it on the abutment.
To ensure accuracy of the impression procedure, do not
damage the inner aspect of the impression cap.
Take the impression using an elastomeric impression
Note
Due to its low tensile strength, hydrocolloid materials are
not suitable for this application.
6. Restoration
100
3c
3a
3b
Using the temporary coping
Step 3 Preparation
Mount the temporary copings on analogs.
Mark the appropriate heights according to the individual
situation and shorten the copings as necessary.
Sandblast and opaque the copings to avoid the titanium
showing through.
Screw the copings onto the abutments in the patients
mouth and seal the screw channels (e.g., with cotton).
Temporary coping Protective cap
Chairside temporization
6. Restoration
101
4a
4b
4c
Step 4 Creating the provisional
Use a standard technique to fabricate the provisional (e.g.,
prefabricated crown form or vacuum-formed sheet technique).
Retention elements ensure proper mechanical bonding of the
veneering material to the coping.
Remove excess acrylic, reopen the screw channel and
finish the temporary restoration.
6. Restoration
102
5
3
Step 5 Inserting the provisional
Clean the polished temporary restoration, place it on the
abutments and tighten the screw to 15 Ncm using the
SCS screwdriver along with the ratchet and the torque
control device (see instructions in chapter 7.5, p. 146).
Cover the screw head with absorbent cotton or gutta-
percha and seal the screw channel with temporary
veneering material (e.g., composite).
Note
Keep the temporary restoration out of occlusion.
Using the protective cap
Step 3 Mounting the protective caps
Use the SCS screwdriver to hand-tighten the screws of the
protective caps on the abutments.
Note
Protective cap can be kept in the patients mouth for up
to 6 months.
6. Restoration
103
1a
1b
Lab procedure for bridge restoration
2
Lab procedure
Note
Ensure that the color code of the analogs corresponds to the
color code of the impression caps or posts.
Impression material can get under the cap. If this occurs,
remove any residue prior to repositioning the analogs.
Click the corresponding analogs into the impression or
reposition and fix the analog in the impression using the
guide screw.
Step 2 Preparation
Fabricate the master cast in a conventional manner
(see instructions in chapter 5, p. 28).
Model a full anatomical wax-up for optimal esthetic
planning. Use the corresponding gold or burn-out copings
as a basis for the wax-up (here the procedure using a
gold coping is shown).
You can define the optimal shape of the restoration by
making a silicone key over the full wax-up.
6. Restoration
104
3a
3b
3c
Lab procedure
Step 3 Fabricating the bridge
Place the gold copings on the analogs and hand-tighten
the occlusal screws using the SCS screwdriver.
Note
When using burn-out copings, do not over-tighten the
copings. This precaution prevents the wax framework from
undergoing excessive stress while loosening the occlusal
screw after the wax modelation.
Shorten the modeling aids to the height of the occlusal
plane according to the individual situation. Working with
the modeling aid ensures a clean and sharp-edged finish
of the screw channel.
Fabricate the superstructure on the abutments.
delicate margin of the copings with wax.
6. Restoration
105
3d
4a
Lab procedure
Use the silicone key of the wax-up to check the spatial
conditions before casting the bridge framework.
Step 4 Investment
Check that the wax framework of the bridge is absolutely
tension-free before investing the framework.
Invest the bridge framework, according to standard
methods without wetting agents.
6. Restoration
106
4b
4c
4d
Lab procedure
Note
clean the copings prior to investment (removal of wax
Make sure the screw channel and the internal con-
figuration of the copings are filled with investment
material from the bottom to the top in order to avoid
air bubbles (see graphic).
6. Restoration
107
5b
5a
Lab procedure
Cast and devest the framework using standard methods
(see instructions in chapter 6.4.1, p. 6667).
Note
The long term success of the prosthetic work depends on the
accurate fit of the restoration. The entire procedure will have
to be repeated, if casting errors occur (see examples on p. 58).
Control tension-free fitting on the master cast by applying
the Sheffield test. If the bridge is not tension-free and
wiggles, cut the bridge and resplint it tension-free.
Note
In order to take the bridge off the master cast, all occlusal
screws must first be removed.
6. Restoration
108
Lab procedure
5c
5d
Do an additional try-on of the tension-free fit of the
framework in the patients mouth.
6. Restoration
109
1a
1b
Lab procedure
Click the corresponding analogs into the impression or
reposition and fix the analog in the impression using
the guide screw.
Lab procedure for bar restoration
Note
Ensure that the color code of the analogs corresponds to
the color code of the impression caps or posts.
Impression material can get under the cap. In this case,
remove the remains prior to repositioning the analogs.
6. Restoration
110
2
3
Step 2 Preparation
Before placing the copings we recommend mounting the
occlusal screws onto the SCS screwdriver. Next, place
the occlusal screws into the copings for bars.
Mount the copings onto the abutment and hand-tighten
the occlusal screws using the SCS screwdriver.
Step 3 and following steps Fabrication of the bar
Follow the steps described on p. 116122 for the
fabrication of the soldered gold bar or laser-welded
titanium bar.
Note
Always use stabilization pins for the soldering of a gold bar.
Lab procedure
6. Restoration
111
1
Remove the temporary restoration.
Throroughly clean the abutments.
Check the tension free fit of the bridgework or bar
before tightening it in the patients mouth. Do not insert
the bridge or bar in case of movements due to tensions
in the bridgework or bar.
Tighten the occlusal screws to 15 Ncm using the SCS
screwdriver along with the ratchet and the torque control
device (see instructions in chapter 7.5, p. 146).
For bridgework, close the SCS configuration of the screws
with cotton and sealing compound (e.g., gutta percha) to
allow removal of the bridge work if needed.
6. Restoration
112
1a
1b
Select the correct size of the multi-base abutments by
using the PLAN set (see instructions in chapter 6.1, p. 39).
Hand-tighten the abutments on the analogs in the
master cast.
Step 2 and following steps Fabrication of the
bridge/bar
Follow the corresponding steps described on p. 104
for the fabrication of the bridge.
Follow the corresponding steps described on p. 116122
for the fabrication of the soldered gold bar or laser-
welded titanium bar.
Note
Always use stabilization pins for soldering a gold bar.
Option B: Impression taking on implant level
Lab procedure for bridge and bar restoration
Lab procedure
6. Restoration
113
1
Position the cleaned abutments in the implants. Tighten to
35 Ncm using the SCS screwdriver along with the ratchet
and the torque control device (see instructions in chapter
7.5, p. 146).
Check the tension-free fit of the bridgework/bar before
tightening it in the patients mouth. Do not insert the
bridge/bar in case of movement due to tensions in the
bridgework/bar.
Tighten the occlusal screws to 15 Ncm using the SCS
screwdriver along with the ratchet and the torque control
device (see instructions in chapter 7.5, p. 146).
For bridgework, close the SCS configuration of the screws
with cotton and sealing compound (e.g. gutta percha) to
allow removal of the bridge work if needed.
6. Restoration
X
X
114
6.8 Abutment for bars
Intended use
Bar-retained implant-borne dentures in the mandible and maxilla
Stabilization and primary splinting of the implants
Characteristics
Simple
Effective one piece solution provides simplified bar restorations for standard
situations
A 15 cone allows implant divergence flexibility up to 30
Abutment can be easily shortened due to 7.0 mm distance from soft tissue level
Reliable
Flexible design for soldered and laser-welded bar constructions with
prefabricated components
Note
6. Restoration
1
2a
2b
115
type 4 dental stone (DIN 6873).
6. Restoration
6.8.1 Abutment for bars Lab procedure
Step 2 Preparation
Place the abutment for bars on the analogs and
hand-tighten the screw using the SCS screwdriver.
Lab procedure
3
116
Step 3 Placing the bar segments
Place the individual bar segments between the
abutment units.
Note
The space between the bar and the gingiva must be at least
2.0 mm. To achieve a good joint, the gap between the
abutment and the bar should be as small as possible.
6. Restoration
Soldered gold bar
(For the lab procedure of a laser-welded titanium bar, continue at step 3 on p. 120.)
Step 4 Fixation of the bar segments
Use a residue-free burn-out plastic to fix the bar segments
to the abutments.
Note
Do not cover the basal screws.
Lab procedure
5
117 6. Restoration
Step 5 Removing the bar framework
After loosening the screws, carefully remove the bar
framework.
Place the framework on the polishing aids and
hand-tighten the screws. The polishing aids ensure that
the abutments are anchored accurately in the soldering
investment during soldering.
Lab procedure
6a
6b
6c
118
Step 6 Soldering the bar
Note
To prevent possible distortion of the bar through uneven
preheating with the flame, preheat the soldering investment
to 500600 C (9321112 F) in a preheating furnace.
After preheating, solder the invested bar according to
standard procedure.
Once soldering is complete, cool down the investment to
room temperature.
Devest and clean the bar in an ultrasonic bath.
Remove the oxides and soldering flux residues in an acid
bath.

Note
Check the fit.
Do not sandblast the framework.
6. Restoration
p
Note
Stress-free repositioning of the bar on the implant analogs
should be possible without securing it with the screws.
Lab procedure
6d
6e
119
p Shorten the bar in height if necessary, and polish.
p Send the finished bar with 4 new basal screws to
the doctors office.
6. Restoration
Lab procedure
Note
At this point, the screws used for soldering are extremely
oxidized. Therefore, do not use them to secure the bar in
the mouth.
See p. 123 for the prosthetic procedure.
3a
3b
120
Step 3 Placing the bar segments
Fit the bar segments to the master cast, allowing for a
certain gap that will be offset by the addition of titanium
(see graphic 3b).
Note
The space between the bar and the gingiva must be at
least 2.0 mm.
6. Restoration
Laser-welded titanium bar
Lab procedure
4a
4b
4c
121
Step 4 Welding of the segments
Weld the segments together with adequate argon
gas rinsing.
Check the fit.
If necessary, shorten the height of the bar and
polish.
6. Restoration
Note
Stress-free repositioning of the bar on the implant analogs
should be possible without securing it with the screws.
Lab procedure
4d
122
Send the finished bar with 4 new basal screws to
the doctors office.
Note
At this point, the screws used for soldering are extremely
oxidized. Therefore, do not use them to secure the bar in
the mouth.
6. Restoration
Lab procedure
1
123
Position the cleaned bar in the implants. Ensure the stress-
free repositioning of the bar on the implants.
Tighten the screw with 35 Ncm using the SCS screw-
driver, along with the ratchet and the torque control de-
vice (see instructions in chapter 7.5, p. 146).
6. Restoration
6.8.2 Abutment for bars Prosthetic procedure
X
X

124
6.9 LOCATOR
Abutment
Intended use
Dentures retained by implants in the mandible and maxilla
Characteristics
Simple
Divergence compensation up to 40 between two implants
Minimum component height for limited occlusal space
Reliable
Dual retention for optimal abutment-denture connection
Excellent long-term performance due to high wear resistance of components
The LOCATOR
components are a registered trademark of Zest Anchors, Inc.

Manufacturer:
Zest Anchors, Inc.
Escondido, CA 92029
USA
0473
6. Restoration
1
2
125
6.9.1 LOCATOR
Abutment Lab procedure

Option A: Master cast from implant level impression
Step 1 Selecting the abutment height
Select the height of the LOCATOR
abutment by determin-
ing the height of the replica gingiva at its highest point on
the master cast. The top margin of the abutment should be
1.0 mm above the mucosa.
Note
Inserting the prosthesis is easier for the patient when the
LOCATOR
abutments are on the same horizontal level.

Hand-tighten the abutment into the implant analog using
the LOCATOR
driver.
6. Restoration
Lab procedure
1
2
126
Step 1 Female analog insertion
Insert the LOCATOR
female analogs into the LOCATOR

impression copings.
Step 2 Fabricating of the master cast
type 4 dental stone (DIN 6873).
Option B: Master cast from abutment level impression
For abutment level impression-taking, special LOCATOR
analogs are used. The selection of the LOCATOR
abutments has
already been made by the prosthodontist.
6. Restoration
Lab procedure
1
2
127
Construction of an overdenture with LOCATOR
denture housings
You can construct a new overdenture or upgrade an already existing and well-functioning overdenture with LOCATOR

components.
Option A: Construction of a new overdenture
Step 1 Placing the white block out spacers and
denture caps
Place one white block out spacer over each abutment.
Place the denture caps with the black processing males
onto the LOCATOR
abutments, or the LOCATOR

analogs in the master cast.
Step 2 Overdenture construction
Construct the overdenture according to the standard
procedure, adding the LOCATOR
denture housing.
Return the completed overdenture to the doctors office
with the black processing males still in place.
6. Restoration
Lab procedure
1
2
3
128
Option B: Upgrading an existing overdenture
Step 1 Placing the white block out spacers and
denture caps
Place one white block out spacer over each abutment.
onto the LOCATOR
abutments, or the LOCATOR

analogs in the master cast.
Step 2 Hollowing out the denture base
Hollow out the existing denture base in the areas of the
LOCATOR
denture caps.
Step 3 Overdenture rebase
Rebase the overdenture according to the standard proce-
dure, adding the LOCATOR
denture housing.
Return to the dentist the completed overdenture with the
black processing males still in place.
6. Restoration
Lab procedure
1
129
6.9.2 LOCATOR
Abutment Prosthetic procedure (standard)

Impression taking
6. Restoration
Make sure the top of the implant is not covered by hard
or soft tissue.
Note
It is imperative that all hard and soft tissue is removed
from the implant shoulder to ensure correct seating of the
LOCATOR
abutment.
abutment by determin-
ing the height of the gingiva at its highest point surround-
ing the implant site. Choose the corresponding abutment
tissue cuff height or the next closest higher size available.
Note
Prosthesis insertion is easier for the patient if the LOCATOR

Option B: Abutment level impression taking
For abutment level impression taking, special LOCATOR
impression components are used. As a consequence, abutment

heights are selected by the doctor on the patient.
2
3
4
130 6. Restoration
Hand-tighten the abutment into the implant using the
LOCATOR
driver.
Tighten the abutment to 35 Ncm using the ratchet, along
with the torque control device and the LOCATOR
driver.
Step 3 Placing spacer and impression coping
Place a white block out spacer ring on each abutment.
The spacer ring is used to block out the area surrounding
the abutment.
Place the LOCATOR
impression copings on the

LOCATOR
abutments.
Take the impression utilizing the mucodynamic technique
(vinyl polysiloxane or polyether rubber).
Send the impression to the dental laboratory.
1
131
The dental technician has completed the LOCATOR

overdenture and returns it to the doctors office for final
placement. The finished denture is delivered with the black
processing males still in place.
Step 1 Selecting the replacement males
Implant divergence up to 10 for a single implant:
6. Restoration
Final restoration
Color Retention
blue 1.5 lbs.
pink 3.0 lbs.
clear 5.0 lbs.
p Implant divergence between 10 and 20 for a single
implant:
Color Retention
red 1.5 lbs.
green 3.04.0 lbs.
Note
Always start with the lowest retention replacement males.
2
3
4
132 6. Restoration
Step 2 Removing the processing males
Remove the black processing males from the housing
(p. 139).
Step 3 Inserting the replacement male
Insert the replacement male with the core tool (p. 137).
Step 4 Inserting the finished denture
Insert the finished denture and check the occlusion.
2
3
1
133
Make sure the top of the implant is not covered by the
gingiva.
abutment by
determining the height of the gingiva at its highest point.
The upper cylindric border should be 1.0 mm or more
(next higher size available) above the mucosa.
Note
Prosthesis insertion is easier for the patient if the LOCATOR

Step 2 Inserting the abutment
Screw the abutment into the implant by hand using the
LOCATOR
driver.
Tighten the abutment to 35 Ncm using the ratchet, along
with the torque control device and the LOCATOR
driver
attached (see instructions in Chapter 7.5, p. 146).
6.9.3 LOCATOR
Abutment Prosthetic procedure (chairside)

For an already existing and well-functioning overdenture, the LOCATOR
system can be used in a chair-side procedure.

Step 3 Placing the block-out spacer
Place a white block-out spacer ring on the abutments.
The spacer is used to block out the area surrounding the
abutment.
6. Restoration
5
4
134
Step 4 Placing the denture caps
onto the LOCATOR
abutments.
Step 5 Hollowing out the denture base
Hollow out the existing denture base in the areas of the
LOCATOR
denture caps.
Note
Ensure that the denture caps fixed on the abutments do not
touch the prosthesis.
6. Restoration
Step 6 Filling the connecting holes
Fill the connecting holes with prosthetic resin from lin-
gual and anchor the caps in the denture (lightcure or self-
curing resin).
Remove any excess resin after curing and polish the
denture.
Note
If the white LOCATOR
block-out spacer does not complete-

ly fill the space between the gingiva and the denture caps,
any remaining undercuts must be blocked out to prevent
resin flowing under the caps. This can be accomplished by
stacking two or more LOCATOR
block-out spacers.
Once the resin has cured, remove the denture from the
mouth and discard the white LOCATOR
block-out spacers.
7
*
*
*
*
*
135
Step 7 Selecting the replacement males
Implant divergence up to 10 for a single implant:
6. Restoration
Color Retention
blue 1.5 lbs.
pink 3.0 lbs.
clear 5.0 lbs.
p Implant divergence between 10 and 20 for a single
implant:
Color Retention
red 1.5 lbs.
green 3.04.0 lbs.
Note
Always start with the lowest retention replacement males.
8
9
10
136
Step 8 Removing the processing males
To place the replacement males in the denture housing,
remove the black processing males from the housing
(p. 139).
Step 9 Inserting the replacement male
Insert the replacement male with the core tool (p. 137).
6. Restoration
Step 10 Inserting the finished denture
Insert the finished denture and check the occlusion.
137 6. Restoration
6.9.4 LOCATOR
Abutment Further references

1. Using the LOCATOR
core tool
The LOCATOR
core tool is a three-piece multifunction instrument.

Gap
The tip is used for removing replacement males from the denture caps. To do this,
the tip must be unscrewed by two full turns. A gap is visible between the tip and
the middle section.
The tip is passed in a straight line into the denture cap with a replacement male.
The sharp edges of the tip hold the replacement male while it is being removed.
The instrument is drawn out of the denture cap in a straight line.
To remove the replacement male from the instrument, the tip must be screwed
clockwise completely onto the middle section. This activates the loosening pin
inside the tip, which releases the replacement male.
138
The middle section of the LOCATOR
core tool is used for inserting replacement

males into the denture caps. To do this, the tip is unscrewed. The exposed end of
the replacement male is pressed into the denture cap. The replacement male is
fixed firmly in the cap when a click is heard.
The end (gold-colored) of the LOCATOR
core tool is used by the dental

technician for screwing and unscrewing the LOCATOR
abutments to and from

the analogs.
2. Determining the implant divergences
Snap the LOCATOR
parallel posts onto the LOCATOR
abutments. Use the

LOCATOR
angle measurement guide to determine the angulation of the

LOCATOR
abutments in relation to each other. With the parallel posts in place,

hold the angle measurement guide behind them to read the angle for each abut-
ment.
Note
Choose the appropriate LOCATOR
replacement males according to the

angulation measured for each abutment.
Tie dental floss through the lateral holes of the angle measurement guide to
prevent aspiration.
6. Restoration
139 6. Restoration
3. Using the black processing male
Both the LOCATOR
female analog and the LOCATOR
denture cap are supplied

with a preassembled black processing male. The black processing male func-
tions as a space keeper for the various LOCATOR
replacement males. For the

relining of a LOCATOR-anchored overdenture, the LOCATOR
replacement males
must be removed from the denture caps and exchanged with black processing
males. The black processing males keep the denture in a stable vertical position
during the relining procedure. When the relining of the denture is finished, the
black processing males are exchanged with the corresponding new LOCATOR

replacement males.
4. Important cleaning instructions
The proper cleaning of the LOCATOR
-borne denture and the LOCATOR

abutments is a prerequisite to ensure the long-term performance of both the
abutments and the nylon processing inserts. An accumulation of plaque on the
abutment that then imbeds into the nylon processing insert can abrade, over time,
the titanium abutment to a smaller diameter and thus causing it to lose retention.
According to the specific situation, the patient might be put on shorter recall
appointments to monitor the proper cleaning of the denture and the abutments.
140
7.1 SCS Screwdriver
The SCS* screwdriver is used for the fixation of the prosthetic parts and healing
components. The star shape of the screwdriver tip connects to the top of the
healing components and abutment screw heads for safe pick-up and handling.
*SCS = Screw Carrying System
SCS screwdriver for manual use
Article: extra short, short, long
Lengths: 15 mm, 21 mm, 27 mm
Art. Nos.: 046.400, 046.401, 046.402
Material: Stainless steel
7. AIDS AND INSTRUMENTS
7. Aids and instruments
141 7. Aids and instruments
7.2 Polishing Aid
The polishing aid is used during polishing and other lab procedures to protect the
abutments prosthetic connection and to establish a convenient fixation extension.
Art. Nos.: 025.2920, 025.4920
Material: Stainless steel
142
7.3 Ratchet and Torque Control Device
The ratchet (Art. No. 046.119) is a two-part lever arm instrument with a rotary
knob for changing the direction of force. It is supplied with a service instrument
(Art. No. 046.108), which is used to loosen the headed screw. After loosening,
the ratchet bolt can be removed from the body of the ratchet. The ratchet gap
must be disassembled prior to use for cleaning and sterilization.
To apply a certain torque when tightening an abutment screw, use the ratchet
together with the torque control device (Art. No. 046.049) and the holding key
(Art. No. 046.064).
Ratchet
The ratchet is used in combination with the torque control device to torque in
all Straumann
abutments and screws (it is the same ratchet used for placing
Straumann
implants manually).
Note
The ratchet and service instrument are packaged together.
looped end
flared part
nut
directional
arrow
ratchet disassembled
pin
forked end
Torque control device
Connected to the ratchet, the torque control device is used
to measure the value of Ncm (Newton centimeter) applied
when inserting Straumann
abutments and screws.

Service Instrument
The service instrument is used to assemble and disassemble
the ratchet.
Holding key
The forked end of the holding key can be used to assemble
and disassemble the ratchet. The pin can be used to
stabilize drivers when abutments and screws are placed
(also used for implant placement).
fluted end
torque scale
tear drop
1a
2a
1b
2b
144
Step 1 Loosening
Loosen the ratchet nut with the service instrument
or the holding key.
7.4 Assembling the Ratchet and the Torque Control Device
Step 2 Removing
Unscrew and remove the internal bolt from the ratchet
body.
3a 3b
4a
4b
Step 3a Insertion
Insert the ratchet body into the torque control device
(flared part of the ratchet must be flush with fluted end of
torque control device).
Step 3b Insertion
Insert the internal bolt into the opposite end of the torque
control device. Tighten it firmly by hand.
Step 4 Tightening
Tighten the nut of the ratchet with the service instrument or
the holding key. Do not overtighten.
The ratchet and torque control device are now assembled
and ready for use.
1
2
3
146
Step 1 Insertion and tightening
Insert the abutment into the implant.
Tighten the abutment screw by hand using the SCS
screwdriver.
7.5 TIGHTENING AN ABUTMENT WITH 35 Ncm
Step 2 Placing the ratchet
Place the looped end of the assembled ratchet with
the torque control device over the driver handle. The
directional arrow must be pointing clockwise (towards the
torque bar with tear drop). If not, pull the arrow out, flip it
over, and let it snap in.
Step 3 Stabilizing the ratchet
For stabilization, put the pin end of the holding key into
the coronal hole on the driver handle.
4
147
Step 4 Positioning of appropriate Ncm mark
Use one hand to hold the holding key and the other hand
to hold the torque bar. Grasp only the tear drop and
move the torque bar to the 35 Ncm mark.
Step 5 Removing the ratchet
After reaching the 35 Ncm mark, return the torque bar to
its starting position.
Lift and remove the holding key, the ratchet with torque
control device and the driver.
Note
Proper care and maintenance are important to ensure correct
function of the ratchet and torque control device. Always dis-
assemble instruments for proper cleaning and sterilization.
For detailed instructions on how to care for these instruments,
please refer to their package inserts.
Recommended torque for abutments and screws
Hand-tight 15 Ncm 1535 Ncm 35 Ncm
Closure screws
Healing abutments
Temporary copings Temporary abutments Final abutments
148
Unless otherwise stated on the product packaging, Straumann abutments and components are not sterile when
delivered. Please use the following procedure for sterilization prior to use.
Note
Parts that have been modified or altered from their original state may require different sterilization procedures.
To prevent tension cracks in PMMA products, do not use the following: alcohol; UV radiation; sterilization; immersion
in liquid for more than one hour; temperatures over 60 C (140 F).
About Sterilization
8. ABOUT STERILIZATION
Material Method Conditions
Ti, Ti alloy
Autoclave, moist heat 134 C (273 F) for 18 minutes
PEEK, PEEK with Ti inlay
Metal alloy Ceramicor
Composition in weight %:
Au 60%, Pd 20%, Pt 19%, Ir 1%
ZrO
2
Dry heat 160 C (320 F) for 4 hours
149
Disclaimer of liability
The Straumann dental implant is part of an overall concept and
may only be used in conjunction with the associated original
components and instruments according to Institut Straumann AGs
instructions and recommendations.
Use of products made by third parties in conjunction with the
Straumann
Dental Implant System will void any warranty or other

obligation, express or implied, of Institut Straumann AG.
Instructions as to application of our products take place verbally, in
writing, by electronic media or in hands-on trainings corresponding to
state of the art at the time of introduction of the product.
The user of Straumann products has the duty to determine whether or
not any product is suitable for the particular patient and circumstances.
Straumann disclaims any liability, express or implied, and shall have
no responsibility for any direct, indirect, punitive or other damages,
arising out of or in connection with any errors in professional judgment
or practice in the use or installation of Straumann products.
The user is also obliged to study the latest developments of the
Straumann
Dental Implant System and their applications

regularly.
Please note
The descriptions contained in this document are not sufficient for
immediate use of the Straumann
Dental Implant System. Knowledge

of dental implantology and instruction in the handling of the
Straumann
Dental Implant System provided by an operator with the

relevant experience are always necessary.
Availability
Not all products listed in this brochure are available in all countries.
Validity
Upon publication of this brochure, all previous versions are super-
seded.
Caution
Our products must be secured against aspiration when used intraorally.
Do not use damaged or blunt instruments.
Units per package
Unless stated otherwise, there is one unit in each package.
Documentation
You can obtain detailed instructions on the Straumann

Dental Implant
System from your Straumann representative.
Copyright and trademarks
Straumann documents may not be reprinted or published, in whole
or part, without the written authorization of Institut Straumann AG.
Straumann
and/or other products and logos from Straumann

that are mentioned here are trademarks or registered trademarks of
Straumann Holding AG and/or its affiliates.
Definition SLActive
Sand-blasted, Large grit, Acid-etched, chemically active and
hydrophilic
Definition SLA

Sand-blasted, Large grit, Acid-etched
Explanation of the symbols on labels and instruction leaflets

Lot/batch number
Article number

Sterile by gamma irradiation

Nonsterile
min.
Lower temperature limit
max.
Upper temperature limit
max.
min.
Temperature limit

Caution: Federal (USA) law restricts this
product to sale by or on the order of a
dentist or physician
Do not use on patients
Do not reuse
Refer to instructions for use
Use before expiry date

Protect from exposure to strong light or heat
XXXX

Straumann products carry the CE mark and
fulfill the requirements of the Medical Devices
Directive 93/42 EEC
Consult operating instructions
Colored warning labels
YELLOW = CAUTION Indicates hazards or unsafe handling
which might cause minor injury or
damage to property
ORANGE = WARNING Indicates hazards which might cause
serious or fatal injury
RED = DANGER Indicates hazards which might cause
immediate serious or fatal injury
IMPORTANT NOTES
Important Notes
9. IMPORTANT NOTES
150
10. INDEX
Abutment
Anatomic 42
Cementable 81
for bars 114
CAD/CAM Customized 71
Gold, for bridge 61
Gold, for crown 49
LOCATOR
124
Meso 42
Multi-Base 96
PLAN 39
Temporary 21
Anchorage
Cement-retained 6
Screw-retained 6
Auxiliary
Modeling aid 49, 61
Polishing aid 141
Scanbody 74
Connection 4
Healing Abutment
Bottle shape 18
Conical 16
Customizable 19
Instrument
Holding Key 143
Ratchet 142
SCS Screwdriver 140
Service Instrument for Ratchet 143
Torque Control Device for Ratchet 143
Planning
PLAN Set/Abutment 39
Pre-operative 12
Polymer
Impression cap 85
Healing Abutment 19
Modeling aid 49, 61
Protective Cap 86
Temporary Abutment 21
Temporary Coping 86
Prosthetics
Abutment Overview 8
Prosthetic options 6
Removable overdenture 6, 114, 124
Restoration
Final 39, 42, 49, 61, 71, 81, 114, 124
Temporary 21
Soft tissue management 15
Template
Drill 13
Thermoplastic drill 14
X-ray 12
Tightening torque 146
8. Index
S
t
r
a
u
m
a
n
n

p
r
o
d
u
c
t
s

a
r
e

C
E

m
a
r
k
e
d

5
/
0
8

U
S
L
I
T

2
3
2
International Headquarters
Institut Straumann AG
Peter Merian-Weg 12
CH-4002 Basel, Switzerland
Phone +41 (0)61 965 11 11
Fax +41 (0)61 965 11 01
www. st r aumann. com
North American Distributors
Straumann USA, LLC
60 Minuteman Road
Andover, MA 01810
Phone 800/448 8168
978/747 2500
Fax 978/747 2490
www.straumannusa.com

Straumann Canada Limited
4145 North Service Road, Suite 303
Burlington, ON L7L 6A3
Phone 800/363 4024
905/319 2900
Fax 905/319 2911
www.straumann.ca

Straumann Basic Information On The Prosthetc Procedures

Uploaded by

Copyright:

Available Formats

Straumann Basic Information On The Prosthetc Procedures

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Straumann Basic Information On The Prosthetc Procedures

Uploaded by

Copyright:

Available Formats

BASIC INFORMATION ON THE

Bone Level Implant

Bone Level implants.

BONE LEVEL IMPLANT

Bone Level implant line are

Bone Level Implant Straumann expertise applied at bone level

Designed to optimize crestal bone pres-

Bone Level Implant features an intuitive im-

Connection features 4 grooves for

Connection features a cone with improved mechanical properties,

Zirconia Titanium Titanium Titanium alloy Ceramicor

is a registered trademark of Cendres & Mtaux SA

Zirconia Titanium Titanium Titanium alloy Ceramicor

Bone Level Implant can be taken by either of the following two

Bone Level Implant

Bone Level Implant (anatomic, cementable,

is a non-oxidizing alloy and does not allow

is only suitable for cast-on procedures

components. The melting range of the casting alloy must

is a registered trademark of Cendres & Mtaux SA

Dental Implant System.

customized abutments, the dental lab needs the following components:

components are a registered trademark of Zest Anchors, Inc.

Abutment Lab procedure

abutments are on the same horizontal level.

female analogs into the LOCATOR

analogs are used. The selection of the LOCATOR

abutments, or the LOCATOR

abutments, or the LOCATOR

Abutment Prosthetic procedure (standard)

impression components are used. As a consequence, abutment

impression copings on the

Abutment Prosthetic procedure (chairside)

system can be used in a chair-side procedure.

block-out spacer does not complete-

Abutment Further references

core tool is a three-piece multifunction instrument.

core tool is used for inserting replacement

core tool is used by the dental

abutments to and from

parallel posts onto the LOCATOR

abutments. Use the

angle measurement guide to determine the angulation of the

abutments in relation to each other. With the parallel posts in place,

replacement males according to the

female analog and the LOCATOR

denture cap are supplied

replacement males. For the

-borne denture and the LOCATOR

abutments and screws.

Dental Implant System will void any warranty or other

Dental Implant System and their applications

Dental Implant System. Knowledge

Dental Implant System provided by an operator with the

and/or other products and logos from Straumann

You might also like