AMS Issue 14 Amendment 01

A321
AIRCRAFT
MAINTENANCE SCHEDULE

VIETNAM AIRLINES
TECHNICAL DEPARTMENT
GIA LAM AIRPORT
200 NGUYEN SON - LONG BIEN - HA NOI

reference: vna AMS A321

Issue = 14 Date :12 Sep 2013 Amendment = 01 Date :

Approved by: civil aviation administration of vietnam

80 GI A O THONG VA N TA l
cue HA NG KRONG VI ~T NA M
so 'J] L f I QD-CHK
CONG BoA XA HOl CJ -llJ NGHI A VI~T NA M
Doc Hip - Tu do - Hanh phllC
Ha N(Ji, ngay 12thang 'I nom 2014
QUYET t)!NH
Y~viec: Phe chuan tai li~u A MS A 321 PH 14, Sf) 01
cua T6ng cong ty H KYN
Cl)C TRUONG CVC HA NG KHONG VI ~T NA M
- Can cu Luat T-Tangkh6ng dun dung Viet Naill ngay 29/06/2006;
- Can CLI' Quyet dinh 94/20091QD- TTg ngay 16/0712009 cua Thu tuong Chinh
phu guy dinh chirc nang, nhiem vu, quyen han va co du t6chuc cua Cue hang
kh6ng Viet Nam;
- Can cir guy dinh cua BO guy che an roan hang kh6ng dan dung I Tnh vue tau
bay va khai thac tau bay ban hanh theo thong nr s6 01/201 1I TT-BGTVT ngay
27/01/20 I 1 cua B0 giao thong Van tai;
- Xet d~ ngh] cua T6ng cong ty HK VN tai cong van s6 476/TC1'1-1K-
A TCL&A ngay 11104/2014;
- Theo c1~nghi cua Truong Phong Tieu chuan an toan bay,
QUyj.~T D!NH
Di~lI 1- Phe chuftn Tai lieu "Cluro'ng triuh bao dtJ 'i':i'rlgtau bay A 321" (A MS
A 321 PH 14, SD 01) cua T6ng cong ty HK YN;
Di~u 2- T6ng cong ty HKYN chiu trach nhiern ap dung theo dung quy dinh cua
A MS A321, PH 14, SF) 01;
f)i~u 3- Phong Tieu chuan an loan bay chiu trach nhiern ki~m tra, giam sat d~
tai lieu A MS 1\321, PH 14 SD 01 (1U'(),e tuan thu nghiem rue.
Di6u 4- QL1y~t dinh nay co hieu lire sau 15 ngay k~nr ngay ky.c:i-:';;:'i 1-.--
NO 'i IIfI~lI:
- C~IC tnrong (de bao cao);
- T6ng Cry HKYN;
- Luu YT, TCA T8, 7'1(~
Vietnam A irlines A ircraft type: A 321 I ssue: I I /Date: 29-04-2011
VNA -EN-F121 A MS I ssue 14A mendment No: 01- Date: 22-01-2014 Page III
. I n accordance with MPD revision 39
Maintenance Schedule A mendment A pproval Submission (Certification)
Date: Checked by: Department: Date:
~
r.s XU3h Duong
St25
"J4/3/101f.
Submitted by: Department:
NGUYEN cueTHI NH DEPUTY TECHNI CA L
DI RECTOR
Compliance Statement:
This Maintenance Schedule complies with the manufacturer's rrururnurn maintenance and inspection requirements and that requirements of the
A irworthiness A uthority for the airframe, engine (on wing), systems, and components except wherein previously or hereby approved by the
A irworthiness A uthority.
Signed ..~... Name J ~~.Xpan.D.tidn Position [).J2IR.c.C:.W&-..... Date ,,19.!3/UJ/+. .
Organisation: Vietnam A irlines Corporation
The above Maintenance Schedule/Maintenance Schedule A mendment is
approved with the following exceptiones):
Signature;\])J ~/~~~~~ .
Name: .lV.: ../) ~ 7!!!t! .
Date: J-.1. ../ ..d... .; .? !? !4:.: .
For:
(A irworthiness A uthority)

TRANSMITTAL LETTER 09/2013

AMENDMENT NO 00 - ISSUE 14

REF: MAINTENANCE SCHEDULE A321 AMS VNA.

Please find attached amendment 01 issue14 to the above referenced schedule. Please embody this
amendment into the maintenance schedule in your possession and duly sign any copy this transmittal
letter on completion to Gialam Library.

INSTRUCTIONS:

1. Remove and discard entirely Aircraft Maintenance Schedule A321.
2. Insert new Aircraft Maintenance Schedule A321 amendment 01, issue 14.

...............................................................................................................................................................................
The undersigned certifies that AMS copy number................ has been amended in accordance with transmittal
letter Jan/2014.

Signed.......................................... Name............................................................. Date..........................................
Issue 14 Amendment 01 Date: JAN 2013

A321 AIRCRAFT MAINTENANCE SCHEDULE
RECORD OF AMENDMENTS

ALL AMENDMENTS TO THIS SCHEDULE WILL BE ACCOMPLISHED BY EITHER THE ORIGINATING
DOCUMENT FOR THE "MASTER SCHEDULE" AND "MASTER COPY" OR BY LETTER OF TRANSMITTAL FOR
SCHEDULE "COPY HOLDERS". ENTER THE NUMBER IN NUMERICAL ORDER TOGETHER WITH THE
DATE INSERTED AND THE SIGNATURE OF THE PERSON AMENDING THIS SCHEDULE.

ISSUE NO. ISSUE DATE AMDT NO. AMDT DATE INSERTED DATE SIGNATURE

01

01

02

02

03

04

05

05

06

06

07

07

07

08

08

09

10

APR. 2001

APR. 2001

MAR.2002

MAR.2002

APR. 2004

OCT. 2004

AUG. 2005

AUG. 2005

NOV. 2006

NOV. 2006

OCT. 2007

OCT. 2007

OCT. 2007

MAR. 2009

MAR. 2009

AUG 2010

OCT 2010

00

01

00

01

00

00

00

01

00

01

00

01

02

00

01

00

00

APR. 2001

MAY 2001

MAR. 2002

MAR.2003

APR. 2004

OCT. 2004

AUG. 2005

JUN. 2006

NOV. 2006

MAR. 2007

OCT. 2007

JAN. 2008

OCT. 2008

MAR 2009

SEP. 2009

AUG 2010

OCT 2010

Issue 14 Amendment 01 Date: JAN 2013

RECORD OF AMENDMENTS

10

10

11

11

11

11

12

13

13

13

13

13

14

14

OCT 2010

OCT 2010

APR 2011

APR 2011

APR 2011

APR 2011

FEB 2012

AUG 2012

AUG 2012

AUG 2012

AUG 2012

AUG 2012

SEP 2013

SEP 2013

01

02

00

01

02

03

00

00

01

02

03

04

00

01

FEB 2011

MAR 2011

APR 2011

JUN 2011

JUL 2011

OCT 2011

FEB 2012

AUG 2012

OCT 2012

JAN 2013

APR 2013

JUL 2013

SEP 2013

JAN 2014


1. General

This maintenance schedule is approved by The Civil Aviation Authority of Vietnam. No changes
or alterations shall be made to this maintenance schedule without the prior consent of The Civil
Aviation Authority of Vietnam.

2. Amendment procedures

One copy of the maintenance schedule amendment form(s) showing the justification for such
amendment(s) will be submitted by Vietnam Airlines to The Civil Aviation Authority of Vietnam for
approval. When the amendment(s) are finally approved, a copy is returned to Vietnam Airlines for
insertion into the 'master copy' and the appropriate amendment number is recorded on the record
sheet. One copy is retained by The Civil Aviation Authority of Vietnam for insertion into the
'master schedule'.

3. Copy holders of the schedule

Amendment(s) will be issued to copy holders of the maintenance schedule by means of a
'transmittal letter' and shall contain a list of highlights with information about significant changes
and instructions of accomplishment.

4. Schedule holders and distribution

Note: distribution of amendment(s) to copy holders of the maintenance schedule will be through
the technical library of Vietnam Airlines.

Distribution list

Manual number Holder
Master schedule CAAV
01 Technical Department
02 Safety - Quality and Security Department
03, 04, 05 VAECO
Master copy Technical Department Library

ISSUE: JAN 2014

SECTION: 0-LEP

PAGE: 1


SECTION 0

SUMMARY OF CHANGES

LIST OF EFFECTIVE PAGES

SECTION MVT PAGE ISSUE
0-LEP R 1 SEP 2013
0-TOC R 1 SEP 2013
0- REASON FOR ISSUE N 1 JAN 2014
0- SUMMARY OF CHANGES R 1 JAN 2014


SECTION 0

SUMMARY OF CHANGES

TABLE OF CONTENTS

SUBJECT SECTION
SUMMARY OF CHANGES 0

ISSUE: SEP 2013

SECTION: 0-TOC

PAGE: 1

A321 aircraft maintenance schedule
Section 0
SUMMARY OF CHANGES
ISSUE: JAN 2014 SECTION 0 PAGE 1
REASON FOR ISSUE 14 AMENDMENT 01
Revise AMS to update maintenance document for new A321 aicraft: MSN 5916 VN-
A608, MSN 5958 VN-A609, MSN 5994 VN-A610. Update RII task. Update Terminal
check, weekly check.

Section 0
SUMMARY OF CHANGES
ISSUE 14 AMENDMENT 00

SECTION 0: SUMMARY OF CHANGES
- Change: Reason for Issue item.

SECTION 1: GENERAL INTRODUCTION

- Update new A321 aircraft MSN 5916 VN-A608, MSN 5958 VN-A609,
MSN 5994 VN-A610 to AMS.
- Update FC unit.
- Update DY unit: 24 calendar hour elapsed. DY interval may be
counted from 00:00 oclock of next day (has not to incdule remaining
day time since task completion).
- Revise RII introduction
SECTION 2: LINE MAINTENANCE CHECKS
- Terminal Check: Add Emergency Equipment check (Item 11c)
- Weekly Check: add Emergency equipment check (Item 5a), add
galley check (Item 6,7), Add IFE check (Item 8)

SECTION 4: SCHEDULED AIRCRAFT MAINTENANCE

Job Card Amendment Code Amendment reasons
ZL-191-01-2 R EFF UPDATE
ZL-324-01-1 R ADD NOTE: RII TASK
ZL-332-01-1 R ADD NOTE: RII TASK
200413-03-1 R EFF UPDATE
215200-08-1 D DELETED TASK
271400-02-2 R ADD NOTE: RII TASK

Section 0
SUMMARY OF CHANGES
31-ECO-01-1 R ADD THRESHOLD NOTE
323105-02-1 R EFF, REF UPDATE
323105-03-1 R REACTIVE
491600-B5-1 D DELETED TASK
494000-B3-2 R EFF UPDATE

Section 0
SUMMARY OF CHANGES

Section 0
SUMMARY OF CHANGES


SECTION 1

GENERAL INTRODUCTION

ISSUE: JAN 2014

SECTION: 1-LEP

PAGE: 1


1-LEP R 1 SEP 2013
1-TOC R 1 SEP 2013
1-General Introduction R 1 JAN 2014


SECTION 1


TABLE OF CONTENTS

SUBJECT SECTION
GENERAL INTRODUCTION 1

ISSUE: JAN 2014

SECTION: 1-TOC

PAGE: 1


ISSUE: JAN 2014 SECTION 1 PAGE: 1
SECTION1
1. GENERAL
This A321 Maintenance Schedule is based on the A319/A320/A321 Maintenance
Planning Document - Revision 39 Issue 00, Jul/2013 customized in accordance
with VIETNAM AIRLINES
National Requirements,
General Maintenance Policy,
Vendors Recommendations.
Aircraft Definition (Basic version, model and modification status),
It is also kept updated by additions/ amendments/ or intervals arising from:
In service experience,
Reliability Program Document Issue 02, Amendment 00
And the following issues of the A318/A319/A320/A321 Airworthiness limitations
Section documents and engine document are covered in this A321 AMS issue:
ALS Part 1: Safe Life Airworthiness Limitation Items (SL-ALI), revision 02,
May 13/11.
ALS Part 2: Damage Tolerant Airworthiness Limitation Items (DT-ALI), Rev
02, May 28/13.
ALS Part 3: Certification Maintenance Requirements (CMR) EASA version,
Rev 01, Jun 15/12.
ALS Part 4: Ageing Systems Maintenance (ASM), Revision 01, Jun 15/12.
ALS Part 5: Fuel Airworthiness Limitations (FAL), Issue 4, 14 Sep 2012.
V2500 A1/A5 Interactive Electronic Technical Manual (IETM), Rev date: Aug
01/12 .
The AMS is kept updated by additions or amendments from sources mentioned
here in above and detailed in the following section.
Attention is drawn to the fact that although the Maintenance Planning Document will
reflect all repetitive scheduled maintenance tasks promulgated by ALS Parts, AOT,
ISB, SIL, AD/CN, , it is the VNA responsibility to adjust his programs on receipt
of the source document and not to wait until the amended A318/A319/A320/A321
MPD revision has been published.
This Maintenance Schedule is applicable to the following aircraft:



FLT S/N MODEL MSN REGISTRATION
NUMBER
ENGINE
001 A321-231 2255 VN A344 V2533-A5
002 A321-231 2261 VN A345 V2533-A5
003 A321-231 2267 VN A347 V2533-A5
004 A321-231 2303 VN A348 V2533-A5
005 A321-231 2974 VN A350 V2533-A5
006 A321-231 3005 VN A351 V2533-A5
007 A321-231 3013 VN A352 V2533-A5
008 A321-231 3022 VN A353 V2533-A5
009 A321-231 3198 VN A354 V2533-A5
010 A321-231 3315 VN A356 V2533-A5
011 A321-231 3355 VN A357 V2533-A5
012 A321-231 3600 VN A358 V2533-A5
013 A321-231 3737 VN A359 V2533-A5
014 A321-231 3862 VN A360 V2533-A5
015 A321-231 3964 VN A361 V2533-A5
016 A321-231 3966 VN A362 V2533-A5
017 A321-231 4136 VN A363 V2533-A5
018 A321-231 4213 VN A365 V2533-A5
019 A321-231 4277 VN A366 V2533-A5
020 A321-231 4315 VN A367 V2533-A5
021 A321-231 4211 VN A322 V2533-A5
022 A321-231 4669 VN - A323 V2533-A5
023 A321-231 4703 VN - A324 V2533-A5
024 A321-231 4737 VN - A325 V2533-A5
025 A321-231 4783 VN - A326 V2533-A5
026 A321-231 4826 VN - A327 V2533-A5
027 A321-231 4863 VN - A329 V2533-A5
028 A321-231 4945 VN - A331 V2533-A5
029 A321-231 4971 VN - A332 V2533-A5
030 A321-231 5164 VN - A334 V2533-A5


FLT S/N MODEL MSN REGISTRATION
NUMBER
ENGINE
031 A321-231 5241 VN A335 V2533-A5
032 A321-231 5247 VN A336 V2533-A5
033 A321-231 5251 VN A338 V2533-A5
034 A321-231 5275 VN A339 V2533-A5
035 A321-231 5297 VN A390 V2533-A5
036 A321-231 5306 VN A392 V2533-A5
037 A321-231 5340 VN A393 V2533-A5
038 A321-231 5385 VN A395 V2533-A5
039 A321-231 5392 VN A396 V2533-A5
040 A321-231 5418 VN A397 V2533-A5
041 A321-231 5438 VN A399 V2533-A5
042 A321-231 5456 VN A601 V2533-A5
043 A321-231 5469 VN A602 V2533-A5
044 A321-231 5495 VN A603 V2533-A5
046 A321-231 5555 VN A604 V2533-A5
047 A321-231 5699 VN A605 V2533-A5
048 A321-231 5709 VN A606 V2533-A5
049 A321-231 5916 VN A608 V2533-A5
050 A321-231 5958 VN - A609 V2533-A5
051 A321-231 5994 VN - A610 V2533-A5

This document is sorted by ATA-Section and Task number.



2. TASK INTERVAL FRAME
Operational units (usage parameters)
"FH" (Flight Hours) : Elapsed time between wheels lift off and touchdown.
"CY", FC (Flight Cycle) : A complete take off and landing sequence.
"LD" (Landing) : An operation of an aircraft touching the runway
and coming to a full stop or performing a touch
and go.
AH" (APU Hours) : APU operating hours.
Calendar units
HR" (Hour) : One calendar hour elapsed
"DY" (Day) : 24 calendar hour elapsed. DY interval may be
counted from 00:00 oclock of next day (has not to
incdule remaining day time since task completion
"MO" (Month) : One calendar month (can be calculated as 1/12
calendar year).
"YE" (Year) : One calendar year ((can be calculated as 365,25
days).
Other codes
"NR" (National Requirement)
Task known as being subject to national regulatory requirement.
VR" (Vendor Recommendation)
Interval value dependent on task vendor recommendation.
"NT" (Note)
Refer to the note at the end of the task description
Maintenance check requirements
Terminal check - N.E. 36 hours elapsed time.
Weekly check - N.E. 8 days
"A" check - N.E. 750 FH or 04 MO
"2A" check - N.E. 1500 FH or 08 MO
"4A" check - N.E. 3000 FH or 16 MO
"C" check - N.E. 24 MO or 7500 FH or 5000 FC
"2C" check - N.E. 48 MO or 15000 FH or 10000 FC


The A check shall be numbered in the following manner:

Interval
Check number 3000 FH or
16 MO
3000 FH or
16 MO
3000 FH or
16 MO
3000 FH or
16 MO
A01 A
A02 A + 2A
A03 A
A04 A + 2A + 4A

The C check shall be numbered in the following manner:

Interval
Check number 96 MO or
30000 FH or
20000 FC
96 MO or
30000 FH or
20000 FC
96 MO or
30000 FH or
20000 FC
96 MO or
30000 FH or
20000 FC
C1 C
C2 C + 2C
C3 C
C4 C + 2C + 4C

Structure program
For the Structures Program the basic thresholds and intervals for environmental
deterioration related items are as follows:
Threshold 6 Years and 12 Years
Interval 6 Years and 12 Years.
Thresholds and intervals for fatigue damage related items are given in Flight Cycles
(and Flight Hours for range sensitive items).
Zonal inspection program
For the Zonal Inspection Program the basic intervals are 4 months and
multiples, 20 months and 40 months, 6 Years and 12 Years.
3. GENERAL RULES
The following rules, apply to the A321 MAINTENANCE SCHEDULE
3-1 Vietnam Airlines' manuals shall contain the details and responsibilities for
accomplishing the maintenance identified by this document.


3-2 The overall reliability of the A321 will be monitored by Vietnam Airlines'
system for continuous analysis and surveillance as required by the
operator's Regulatory Authority.
3-3 Category II/III landing capabilities and RVSM capability are inherent
functions of the basic design standard of the aircraft. Scheduled tasks
necessary for these operations have been considered in the development of
this program.
3-4 Task intervals may be changed in accordance: with the Regulator, Authority
practices and rules. In this respect, attention is drawn to the source of the
task.
3-5 Weight Variant applicability and weight limits: some SSIs have different
limitations or fatigue inspection requirements depending on the Weight
Variant of each aircraft. The list of the approved WV is provided in the Type
Certificate Data Sheet (TCDS), NA.064 issued by the EASA, together with
associated modification configuration(s). The relevant weight variant of
VNAs A321 fleet, A321-231 is listed in following table:

VARIANT
000
(BASIC)
001
(MOD 28960)
Max. Ramp Weight (kg) 89 400 93 400
Max. Take-off Weight (kg) 89 000 93 000
Max. Landing Weight (kg) 75 500 77 800
Max. Zero Fuel Weight (kg) 71 500 73 800
Minimum Weight (kg) 47 500 47 500

3-6 The airworthiness limitations contained herein allow operation up to the
Limit of Validity (LOV) in FC or FH whichever occurs first. The relevant
LOV values are stated below.
The LOV reflects the limit of validity of the engineering data that supports
the structural maintenance program.
The aircraft shall not be operated beyond these values unless the
manufacturer has updated maintenance documents to include a clearly
defined LOV extension.

Ite
m
Model
A/C
Reg
MSN
WEIGHT
VARIANTS
MOD GROUP
LOV
Airframe
FH FC
1 A321-231 A344 2255 000 21-2A 60,000 48,000
2 A321-231 A345 2261 000 21-2A 60,000 48,000
3 A321-231 A347 2267 000 21-2A 60,000 48,000
4 A321-231 A348 2303 000 21-2A 60,000 48,000
5 A321-231 A350 2974 001 28960 21-2B 60,000 48,000
6 A321-231 A351 3005 001 28960 21-2B 60,000 48,000
7 A321-231 A352 3013 001 28960 21-2B 60,000 48,000
8 A321-231 A353 3022 001 28960 21-2B 60,000 48,000


Ite
m
Model
A/C
Reg
MSN
WEIGHT
VARIANTS
MOD GROUP
LOV
Airframe
9 A321-231 A354 3198 001 28960 21-2B 60,000 48,000
10 A321-231 A356 3315 001 28960 21-2B 60,000 48,000
11 A321-231 A357 3355 001 28960 21-2B 60,000 48,000
12 A321-231 A358 3600 000 21-2A 60,000 48,000
13 A321-231 A359 3737 001 28960 21-2B 60,000 48,000
14 A321-231 A360 3862 001 28960 21-2B 60,000 48,000
15 A321-231 A361 3964 001 28960 21-2B 60,000 48,000
16 A321-231 A362 3966 001 28960 21-2B 60,000 48,000
17 A321-231 A363 4136 001 28960 21-2B 60,000 48,000
18 A321-231 A365 4213 001 28960 21-2B 60,000 48,000
19 A321-231 A366 4277 001 28960 21-2B 60,000 48,000
20 A321-231 A322 4311 001 28960 21-2B 60,000 48,000
21 A321-231 A367 4315 001 28960 21-2B 60,000 48,000
22 A321-231 A323 4669 000 21-2A 60,000 48,000
23 A321-231 A324 4703 000 21-2A 60,000 48,000
24 A321-231 A325 4737 000 21-2A 60,000 48,000
25 A321-231 A326 4783 000 21-2A 60,000 48,000
26 A321-231 A327 4826 000 21-2A 60,000 48,000
27 A321-231 A329 4863 000 21-2A 60,000 48,000
28 A321-231 A331 4945 000 21-2A 60,000 48,000
29 A321-231 A332 4971 000 21-2A 60,000 48,000
30 A321-231 A334 5164 000 21-2B 60,000 48,000
31 A321-231 A335 5241 001 21-2B 60,000 48,000
32 A321-231 A336 5247 001 21-2B 60,000 48,000
33 A321-231 A338 5251 000 21-2A 60,000 48,000
34 A321-231 A339 5275 000 21-2A 60,000 48,000
35 A321-231 A390 5297 001 21-2B 60,000 48,000
36 A321-231 A392 5306 000 21-2A 60,000 48,000
37 A321-231 A393 5340 000 21-2A 60,000 48,000
38 A321-231 A395 5385 000 21-2A 60,000 48,000
39 A321-231 A396 5392 000 21-2A 60,000 48,000
40 A321-231 A397 5418 000 21-2A 60,000 48,000
41 A321-231 A399 5438 000 21-2A 60,000 48,000
42 A321-231 A601 5456 000 21-2A 60,000 48,000
43 A321-231 A602 5469 001 21-2B 60,000 48,000
45 A321-231 A603 5495 000 21-2A 60,000 48,000
46 A321-231 A604 5555 000 21-2A 60,000 48,000
47 A321-231 A605 5699 000 21-2A 60,000 48,000
48 A321-231 A606 5709 001 21-2B 60,000 48,000
49 A321-231 A608 5916 000 21-2A 60,000 48,000
50 A321-231 A609 5958 000 21-2A 60,000 48,000
48 A321-231 A610 5994 001 21-2B 60,000 48,000


3-7 Vietnam Airlines should be aware of the various inspection techniques such
as X-Ray, ultrasonic, eddy current, radio isotope... which are available and
described in the Non-Destructive Testing Manual (NTM). The use of such
techniques can be developed to provide a valuable adjunct to the
prescribed visual inspections. For any substitution of such inspection
technique, it must be ensured that the same damage size will be
detectable by the proposed technique with, at least, the same level of
confidence.
3-8 Items that are life limited will be removed from service according to the
life limits referenced in the aircraft "Type Certificate Data Sheet" or in the
appropriate section of the engine or aircraft manufacturer's manuals.
3-9 Tasks coming from any of the ALS parts must not be deleted and should
be handled with specific associated rules, as described in the subject
documents. ALS Part 3 tasks have specific rules regarding escalation as
follows:
CMR* * : Task interval may be escalated by the operator, in
accordance with an approved reliability program.
CMR* : Task interval shall not be escalated by the operator.

3-10 Tasks may be considered to conform to the requirements of the
scheduled maintenance program if accomplished as part of a regulatory
authorities approved/accepted equivalent check/test by flight crew.
3-11 It is the responsibility of Vietnam Airlines to adjust his own maintenance
program in accordance with his National Requirements and to comply
with existing rules with respect to reporting to his Regulatory Authority
and to the manufacturer events having effects on the continued
airworthiness of the aircraft.
In addition to the above
Vietnam Airlines must be aware of manufacturer and vendors
recommendations and/or requirements published through Inspection
Service bulletin (ISB), Service Information Letter (SIL), All Operators
Letter (AOL), All Operators Telex (AOT) and other documents
dealing with maintenance, since they can not be immediately
reflected in the Maintenance Program.
For engines, APU, and main components, Vietnam Airlines should
also consider manufacturer's manuals for additional task once the
engines or the components are in the shop.
Vietnam Airlines shall refer to Airbus Industries technical publications
(Aircraft Maintenance Manual, Non Destructive Testing Manual, and
Structure Repair Manual) for maintenance practices and procedures.
When two thresholds or intervals, in different units, are assigned to a
task, and when not otherwise stated, the interval expiring fast shall
apply.


3-12 The maintenance clock does not stop while the aircraft is in maintenance
condition. Although the aircraft does not collect any FH or FC when being
on ground, attention has to be given to tasks, where the interval is
expressed in calendar time (hours, days, month, and year). All tasks that
become due at the time of the maintenance visit have to be performed
prior to return to service. However, there is no need to repeat inspections
during the check event. E.g. during a 4 weeks downtime, tasks with
interval 8 DY only need to be performed at the end of the check (for
return to service).
The tasks and frequencies in this AMS have been developed and are
valid for aircraft in operation. If an aircraft is not in operation e.g. parked
or stored, the instructions quoted in AMS section 5 should be followed.
3-13 Unless otherwise specified by AIRBUS in the delivery documentation of
an aircraft, the starting point for calculation of the due dates or times of
all aircraft maintenance tasks (whether the intervals are quoted in Flight
Cycles, Flight Hours or Calendar time) is to be the first flight of that
aircraft. The date of Transfer of Title to a customer may be used for
calculation of the due date of tasks with a calendar interval if that transfer
occurs within 90 days of the date of the first flight of the aircraft and the
aircraft has been stored or parked in accordance with AIRBUS
procedures according to AMM Chapter 10. The start date for the overhaul
period of an overhauled landing gear is the date of the gear's first flight
after overhaul.
The following exceptions apply:
STR, ALI tasks quoted in terms of FH or FC: the first flight is the
starting point for calculation.
ASM tasks quoted in terms of FH or FC: the first flight is the starting
point for ASM tasks quoted in terms of FH or FC.
For TIME CONTROLLED ITEM equipment with intervals defined by the
vendor or by National Requirements (VR or NR): The date of manufacture
is the starting point unless otherwise stated by vendor or national
authority.
The start date for the overhaul period of an overhauled landing gear is
the date of the gear's first flight after overhaul.
For items covered by CN/AD: as stated in the CN/AD.
Where a Damage Tolerant item is transferred from one aircraft to
another, the required maintenance task threshold and intervals for the
transferred item are to be respected:
- For the threshold, the next due inspection (in calendar, FC or FH) is
to be calculated from the date of the first flight after installation of the item
on the first aircraft.
- For the interval, the next due inspection (in calendar, FC or FH) is to
be calculated from the date of the previous task performance on the
transferred item.


If the required inspections on the transferred item are performed as part of
the installation process, then the next due inspection for maintenance
counts from the installation date. If the date of the ToT occurs more than 3
months after of the date of the first flight of the aircraft, Airbus is to be
consulted for advice. On request Airbus can define specific maintenance
tasks to be performed prior to the ToT that may allow the aircraft delivery
date to be used as the starting point for calculation of the due dates.
3-14 ANNUAL UTILIZATION AND MAINTENANCE REVIEW.
The periods / frequencies of the maintenance tasks in this schedule are
generally based on an anticipated annual utilization of 3000 FLIGHT
HOURS and large variations in the annual utilization of individual aircraft
could invalidate the effectiveness of certain tasks. If the annual utilization
varies by more than 25% from that anticipated, the operator accepts that
he or his contracted maintenance organization must review the
maintenance tasks and periods with a view to making any necessary
adjustments.
In addition to variations in utilization the data contained in this schedule
will be reviewed at least annually by the operator or his contracted
maintenance organization, to ensure that the detailed requirements
continue to be valid in the light of operating experience.
3-15 METHOD OF NEXT DUE CHECK CALCUALTION
When determine the next due of a check, use the following method:

- If CRS date is after Due Date then the Next Due = Due Date +Interval.
- If CRS date is before Due Date then the Next Due = CRS date +Interval.
4. CONTINUOUS AIRWORTHINESS
Maintenance tasks and frequencies required by the MRB Document (individually
identified in this document) together with limitations of life limited parts are
Published in the documents of A318/A319/A320/A321 ALS - Airworthiness
Limitations Section and IAE A319/A320/A321/V2500-A5 - Chapter 05 -Time Limits
Manual.
Constitute the instructions that the manufacturers consider as essential for
proper maintenance of the aircraft.
For the manufacturer and Vietnam Airlines common benefit, significant
maintenance information will be reported to the manufacturer to be considered
for further development of the A319/A320/A321 MPD.
5. DOCUMENTS BREAKDOWN


The A321 AMS will be presented in 6 different sections as follows:
SECTION 0: SUMMARY OF CHANGES
- Reason for Issue
- Summary of changes
SECTION 1: GENERAL INTRODUCTION
SECTION 2: LINE MAINTENANCE CHECKS
- PRE-FLIGHT/TRANSIT CHECK
- TERMINAL CHECK
- WEEKLY CHECK
SECTION 3: SCHEDULED COMPONENT MAINTENANCE
- Sub-section 3.1: Engine LLP
- Sub-section 3.2: Landing Gear LLP
- Sub-section 3.3: System Life Limited Components
- Sub-section 3.4: Time Controlled Items List
SECTION 4: SCHEDULED AIRCRAFT MAINTENANCE
- Sub-section 4.1: Airworthiness Limitation Items (ALI)
- Sub-section 4.2: Certification Maintenance Requirement (CMR)
- Sub-section 4.3: Ageing Systems Maintenance (ASM)
- Sub-section 4.4: Fuel Airworthiness Limitation (FAL)
- Sub-section 4.5: Systems, APU and Power Plant
- Sub-section 4.6: Structure Program
- Sub-section 4.7: Zonal Program
- Sub-section 4.8: Fuel Saving Program
SECTION 5: SPECIAL PROCEDURES
- Sub-section 5.1: Unscheduled Maintenance Checks and
Inspections.
- Sub-section 5.2: Parking and Storage Procedures
- Sub-section 5.3: Cold Weather Maintenance Procedure.
- Sub-section 5.4: Critical Design Configuration Control Limitations.
6. OVERALL DOCUMENTS DESCRIPTION

The initial issue/amendment of the AMS was based on the first issue of the
A318/A319/A320/A321 Maintenance Planning Document (MPD). The tasks and
their frequencies given in the MPD, together with the requirements of
Airworthiness Limitations documents shall be introduced in the Section 3, 4 and
section 5.


Maintenance requirements promulgated through ALS Part 1 and ALS Part 4 -
Subpart 4-2 are not included in MPD since they are not repetitive maintenance
tasks. Therefore VNA shall be updated these mandatory requirements approved
by Primary Type Certification Authorities on AMS as hereafter.

6.1 Section 3 Scheduled Components Maintenance:
The maintenance requirements related to many aircraft components, as
listed in the manufacturers documents or mandated by Authority for an aircraft
or the model aircraft:
- Sub-section 3.1- Engine LLP: Life limitation parts of CFM engine mentioned
in paragraph 1 of this section and they are quoted from V2500 A1/A5
Interactive Electronic Technical Manual (IETM), Chapter 5.
- Sub-section 3.2 - Landing Gear LLP: Life limitation parts of lading gear
system can be equipped for A320 aircraft. This sub-section is filtered from
ALS part 1 (Safe life Airworthiness Limitation Items).
- Sub-section 3.3 - System Life Limited Components: The content of this sub-
section is quoted from ALS part 4-subpart 4-2 (system life limited
components) and ALS part 5-section 1-table 2 (life limits).
- Sub-section 3.4 - Time Controlled Items List: for detail interval of the
maintenance task in section 4. This section is based on the following
documents: ALS part 4-subpart 4-3, ALS part 5-section 1-table 1, vendor
recommendations, national requirements, MPD task related to CMM.

6.2 Section 4 Scheduled Aircraft Maintenance:
This section includes all scheduled maintenance tasks related to the aircraft
systems, structure and zonal inspection. The sub-sections are built on the
following documents
- Sub-section 4.1: The Structure section of MPD as well as ALS part 2
(Damage Tolerant Airworthiness Limitation Items).
- Sub-section 4.2: The Systems/APU/Power Plant of MPD section as well as
ALS part 3 (Certification Maintenance Requirements)
- Sub-section 4.3: The Systems/APU/Power Plant section of MPD as well as
ALS part 4 subpart 4-3 (Systems Installations Maintenance Requirements).
- Sub-section 4.4: The Systems/APU/Power Plant section of MPD as well as
ALS part 5 section 1 table 1 (Repetitive tasks)
- Sub-section 4.5: The Systems/APU/Power Plant section of MPD.
- Sub-section 4.6: The Structures section of MPD.
- Sub-section 4.7: The Zonal section of MPD.
- Sub-section 4.8: Fuel saving policy of VNA
6.3 Section 5 Special Procedures
This section is built on to introduce the special maintenance requirements
such as unscheduled maintenance, preventive maintenance ect. The quoted
documents are:
- Sub-section 5.1: A320 AMM chapter 05-51 inspection/checks after the
aircraft has gone through special or abnormal conditions.
- Sub-section 5.2: A320 AMM 10-11-00-555-006 and AMM 10-12-00-553-005.
- Sub-section 5.3: A320 AMM 12-31-00-600-001.
- Sub-section 5.4: ALS part 5 section 2 (Critical Design Configuration Control
Limitations).


7. METHOD OF PRESENTATION
Presentation of maintenance tasks
- The tasks are listed in increasing task reference order within each sub-section.
7-1 Task Number
Each task is identified by a specific task number. When a task has to be repeated in
several specific zones, the task is assigned a single task number. But the several
zones are indicated in "ZONE" column.
The task number comprises 9 digits organized as follow:
XX XX XX - XX - X
I I I
I I I
I I l effectively index
I I _____ Sequence number
I____________ __ ATA reference or first main zone
* ATA reference or first main zone.
- The ATA reference identifies the system/sub-system or component on which
the task is to be accomplished.
- The main zone number is preceded by the letter code "ZL". For tasks to be
repeated in several main zones, the first main zone or LH zone number is
used (Aircraft zoning is given in MPD Volume 2, Section 10).
* Sequence number
- The sequence number is used to discriminate between different tasks relating
to the same system, component, zone or structural significant item.
- Engine type is identified by "I" (IAE) in first digit.
- Vietnam Airlines originated tasks have "VN" as two first digits of the ATA
reference number
* Modification index
- The effectivity index identifies different effectivity of the same work and for
successive developments of a task introduced by modifications or specific
requirement. However, in a few cases, the sequence number may be used
for that purpose, when referenced documentation requires doing so.
- The technical status or specific requirement associated with each effectivity
index is specified in the effectivity column. As a general rule, tasks with same
first 8 digits in task number have same work description in the AMM.
7-2 Main Zone column
The "ZONE" column shows the positions) where the task has to be
accomplished (repeated) according to the description. Quoting several
positions means that the task has to be repeated in each position.


One zone number or one sub-major zone number or one major zone number
identifies either each position.
When sub-major or major zone number is quoted to identify a unique position
of a task, the more precise zone numbers are quoted in the description in
case such additional information is estimated useful.
7-3 Description column
This column provides the following information
* Task title
Identifies the system/sub-system/component/zone/structural significant item
concerned by the task.
* Task description
Gives a concise description of the work to be performed.
* Sampling Note: Sampling Program Inspection. When this note is not
printed, the task has to be accomplished on all aircraft of the fleet. (Refer to
A319/A320/A321 MPD, Section 3-Structure-Intro, chapter Sampling
Program)
* CPCP Note: Requirements to control corrosion to level 1 or better (refer to
A319/A320/A321 MPD Section 3-Structure - Intro, chapter Corrosion
Prevention and Control Program)
* Task preparation (where applicable)
Specifies the preliminary steps (from a pre-established list) to be performed
prior the maintenance task itself.
* Access (where applicable)
Specifies the identifiers of the access panels, linings or doors to be opened
or removed for accomplishment of the task.
Their identifiers do not designate floor panels of passenger cabin and carpe
holds but by frames numbers between which the floor panels have to be
removed are quoted.
* Task code
Mnemonic code defining the type of task to be carried out
ADJ Adjustment/alignment/calibration
BSI Bore scope inspection
VCK Visual check. Check fluid level, Check detector
CHK Check for leaks, Check circuit continuity, Check fluid reserve on
item, Check tension or pointer, Check charge pressure, Remove
and check, Check torque
LKC Leak Check
CLN Cleaning
DRN Draining


DI Detailed inspection
ERU Engine run-up
FNT Functional test
GVI General visual inspection
INS Install
LUB Lubrication
SDI Non-destructive Testing
OPC Operational Check
OPT Operational Test
PRZ Pressurize
DIS Remove and discard
RAI Remove and install
RAR Remove and replace
RDG Reading
RDT Remove, discard and test
RST Remove for restoration
SVC Replenishment (fluid change)
SDI Special detailed inspection
SPL Sampling
SVC Servicing
TST Test
TPS Temporary Protection.
TUP Fluid Top Up
7-4 Threshold/Interval
This column provides the following information
* Threshold
This information, preceded by the letter "T", gives a specific value of an
operational parameter or of a letter code defining the first accomplishment
deadline of the task. When threshold is equal to the interval. The lever "T"
may not show.
When the threshold is expressed in several units, the conjunction "OR"
separate the different indications.
* Task interval
This information, preceded by the letter "I", gives a specifi c value of an
operational parameter or of a letter code defining the maximum tine that
can separate two complete accomplishments of the task.
When interval is equal to the threshold, the letter "I" may not show.
When the interval is expressed in several units, the conjunction "OR"
separate the different indications.


7-5 CT INSPECTION COLUMN
An X in the CT column means that the task requires an inspection.
7-6 REFERENCE COLUMN
This column provides
The AMTOSS (AMT) and the AMM references of the task in the A321
Aircraft Maintenance Manual (AMM).
* References to technical publications where accomplishment instructions
can be found.
* The reference of a special directive (French CN, German LTA, American
AD, Inspection Service Bulletin - ISB, SIL) where additional information of
the origin or justification will be found.
7-7 Men and M-H
Specifies
- The number of men and the corresponding man-hours required to carry
out the task in each position quoted in "ZONE. Man-hours are expressed
in hours and hundredth of hours.
For tasks which require to be performed in shop (example: landing gear
restoration), men and man-hours shown correspond to the
removal/installation of the item concerned (shop man-hours are not
considered)
- The man-hours required opening and closing: the listed access panels.
The figures quoted do not include
* Preparatory work such as aircraft cleaning, positioning work stands,
procuring consumable materials, connecting ground power carts, etc.
* Correction of defects found during task accomplishment.
* Correction for dead time and manpower efficiency.
Therefore these figures represent as such the man-hours actually needed
- The skill code, specifying the type of skill required for task
accomplishment.
AF : Airframe IN : Avionics
CA : Cabin LU : Lubrication
CL : Cleaning QC : Non-Destructive Testing
EL : Electrical RA : Radio
EN : Power Plant UT : Utility
AV : Instrument NDT: Non Destructive Test
7-8 Effectivity column


The information given in this column defines the technical status of the
aircraft on which the task is applicable.
The technical status is expressed as one, or a combination, of the
following keywords
* Serial number indicates that the task is applicable to this particular
aircraft in the A321 fleet or part of the A321 fleet.
* "ALL" indicates that the task is applicable to all aircraft in the fleet.


Vietnam Airlines A321
A M A S I S A I R C R A F T M A I N T E N A N C E S C H E D U L E

TASK Zone D E S C R I P T I O N Task Threshold C References A/C
NUMBER --------------------- Code Interval T EFF.
CHAPTER : 57 WINGS
575142-01-1
1
147
148
2
INBOARD FLAP ACTUATOR DRIVE ARM DVI
DETAILED VISUAL INSPECTION OF INBOARD FLAP,
INBOARD ACTUATOR DRIVE ARM, DRIVE STRUT AND
OUTER PART OF TRUNNION --------- 3
NOTE : 100% LIMIT = 20 YE
NOTE 2: SAMPLING 20% -------- 4
NOTE 3: CPCP -------- 5
PREP. : FLAP EXTENSION

Skill : 1 AF For 1.80 Hrs per zone ---------- 6

Access 734 744 --------- 7 0.00 Hrs
T 24000 FC
Or 10 YE
I 15000 CY
Or 10 YE

8
X AMM 575100/6 ALL
AMT 575100-200-004 10

9

Issue number: 02 Amendment No : 00 A.M.S. Page : STR -57/ 71
Date : 24/01/2002 Date : 24/01/2002 Ref : VN-001 ATA : 57

1 Task number 2 Position(s) of the task, identified by the zone 3 Task title, task description 4 Sample size
5 CPCP 6 Number of men and man-hours (in hours and hundredth of hours) per position 7 Access
8 Threshold, Interval 9 AMM, AMTOSS ref., Tech. Pub., Special Directives 10 Task effectivity


7-9 Permitted variations to maintenance periods
7-9-1 Vietnam Airlines or their contracted Maintenance Organization may
vary the periods described by this Maintenance Schedule provided
such variations are within the limits defined below.
7-9-2 Variations shall be permitted only when the periods prescribed by this
Maintenance Schedule (or documents m support of this Maintenance
Schedule) cannot be complied with due to circumstances which
could not have reasonably been foreseen by Vietnam Airlines or by
the contracted Maintenance Organization.
7-9-3 The decision to vary any of the prescribed periods shall be taken only
by the Chief Inspector/Quality Manager or person of equivalent
status on behalf of Vietnam Airlines or his contracted Maintenance
Organization. Particulars of every variation so made shall be entered
in the appropriate Log Book(s).
7-9-4 Maximum Variations:
The maximum variation of a prescribed period is indicated below
table as follows:

Items controlled by Flight Hours Maximum variation of the prescribed period
5000 Flying hours or less 10%
More than 5000 Flying hours 500 Flying hours
Items controlled by Calendar Time Maximum variation of the prescribed period
Up to 12 months 10% but not exceeding 1 month
Between 13 and 36 months 2 months
More than 3 years 3 months
Items controlled by Landing/cycles Maximum variation of the prescribed period
500 landings/cycles or less 5% but not exceeding 25 FC
More than 500 landings/cycles 5% but not exceeding 250 FC
NOTE 1 : For ECO tasks, maximum variation of the prescribed period is 20%.
NOTE 2 : For items controlled by more than one limit, e.g. items controlled by
Flying Hours or Flying Hours and Landings/cycles, the more restricted
limit shall be applied.
NOTE 3 : The variations permitted above do not apply to:
Those periods included in the Maintenance Schedule which have
been classified as mandatory by the CAAV.
ALI, CMR, AD/CN, FAL, ASM related tasks and Life limitations
related items/components in AMS section 3.


8. SAMPLING PROGRAM
8-1 INTRODUCTION
The purpose of the Sampling Program is to detect systematic deterioration
caused by the environment and/or fatigue, on a group of aircraft selected
from those which have the highest age within a considered fleet. The
Sampling Program is applicable to both Environmental Deterioration (ED)
and Fatigue Damage (FD) SSIs, where the deterioration, should it occur, is
considered as being progressive with age or operating usage. Only those
SSIs for which a systematic environmental deterioration/fatigue damage
characteristic has been analyzed will be considered for inclusion in the
Sampling Program.
SSIs which are susceptible to Accidental Damage (AD) [Non-systematic]
are not considered for the Sampling Program.
The Sampling Program terminates for each applicable SSI at the 100%
Threshold, e.g. the 100% Threshold for all calendar-time Sampling
Program items is 20 Years.
Sampling tasks have NOTE: SAMPLING 20% and NOTE: 100% LIMIT in
DESCRIPTION column.
Following aircraft are selected for Sampling program:

MSN REGISTRATION NUMBER ENGINE
2255
2261
VN - A344
VN - A345
V2533-A5
V2533-A5
2267 VN - A347 V2533-A5
2303 VN - A348 V2533-A5
2974 VN - A350 V2533-A5
8-2 ARRANGEMENT OF INSPECTIONS
For the selected Sampling Program aircraft, inspections commence at the
Sample Threshold and continue at each subsequent repeat inspection
interval.
The same aircraft are to be inspected at each subsequent repeat
inspection interval.
NOTE: The 100% Threshold is the threshold for all aircraft not selected for
sampling.



9. CORROSION PREVENTION AND CONTROL PROGRAM (CPCP)
9-1 INTRODUCTION
The Structures Program includes requirements to control corrosion to Level
1 or better on all structural details, elements or assemblies which
contribute significantly to carrying flight, ground, pressure or control loads,
and whose failure could affect the structural integrity necessary for the
safety of the aircraft. All Corrosion Prevention and Control Program
(CPCP) requirements are indicated by the code CPCP in the SOURCE
column.
Some calendar-time tasks are also covered by the Sampling Program, i.e.
they have a Sample Threshold/Interval. For these tasks, the 100%
Threshold is the time at which the task becomes a CPCP task.
9-2 CORROSION LEVEL DEFINITIONS
The definitions for the various Levels of corrosion are as follows:
Level 1 Corrosion
Corrosion damage that does not require structural reinforcement or
replacement.
or,
Corrosion occurring between successive inspections exceeds allowable
limit but is local and can be attributed to an event not typical of operator
usage of other aircraft in the same fleet (e.g. Mercury spill).
Level 2 Corrosion
Corrosion occurring between successive inspections that requires a single
rework/blend-out, which exceeds allowable limits as defined by the
manufacturer (SRM, SB, etc.), requiring a repair/reinforcement or complete
or partial replacement of applicable structure.
Level 3 Corrosion
Corrosion found during first or subsequent inspection(s), which is
determined (normally by the operator) to be an urgent airworthiness
concern requiring expeditious action.
9-3 CPCP RULES
The effectiveness of the Corrosion Prevention and Control Program is
determined by following the General Rules applicable to the Structures
Program (refer to Paragraph 8) and the rules listed below (Refer also to
CPCP Flow Chart and Decision Steps on following pages).
Level 1 Corrosion Findings
Should inspections consistently reveal corrosion Level 1 findings for a
given area during repeat inspections on particular aircraft operated in


similar conditions, then the existing program is considered effective for the
concerned area, and no change to the program is necessary.
Should inspections reveal that corrosion is Level 2 for a given area during
repeat inspections, and then the existing program is not effective for the
concerned area of the particular fleet.
In order to control corrosion to Level 1 or better, consideration should be
given to one or more of the following corrective actions:
- Decreasing the inspection threshold/interval
- Considering a higher inspection level
- Re-considering the Program Concept
- Application/More frequent application of Temporary Protection System
- Embodiment of preventive modifications, where applicable
- Installation of parts with improved protection standard, where
applicable
In this way, the program is self-regulating and will adjust itself to the
optimum program.
Should inspections reveal that corrosion is Level 3 in a given area, and
then the existing program is not effective for the concerned area.
In addition to the considerations given for Level 2 corrosion, an action plan
calling for a one-time inspection of the concerned area should be
expeditiously agreed with the local Aviation Authority and carried out on all
aircraft of a similar age or older.
Airbus may be consulted to determine whether or not the airworthiness is
affected. In this case all details of findings are to be promptly reported for
detailed evaluation and the assistance required clearly expressed.
A periodic review of the Structures Program, with particular attention to
reported fleet data shall be scheduled to maintain the target of this program
to control corrosion to Level 1 or better on all structural details, elements or
assemblies which contribute significantly to carrying flight, ground,
pressure or control loads, and whose failure could affect the structural
integrity necessary for the safety of the aircraft.



FLOW CHART TO DETERMINE CORROSION LEVELS


EXPLANATION ON FLOW CHART DECISION STEPS
DECISION STEP A - CORROSION FINDING
There is a corrosion finding which is considered to be more than a negligible
finding.
DECISION STEP B - BEYOND ALLOWABLE LIMITS
The corrosion defect noticed on the considered aircraft is beyond the allowable
limits as defined by the manufacturer (e.g. SRM, SB, etc.).
DECISION STEP C - AIRWORTHINESS AFFECTED
The corrosion defect is beyond the allowable limits which prevent the aircraft from
flying in a safe condition.
When significant corrosion findings occur which could affect the structural integrity
of the airplane Airbus can be consulted to determine whether or not the
airworthiness is affected.
In this case all details of findings are to be promptly reported for detailed evaluation
and the assistance required clearly expressed.
DECISION STEP D - DUE TO A NON TYPICAL EVENT
For the purpose of the flow chart, a non-typical event is an event which is
considered to be not representative of the events which normally occurs or could
occur in the concerned area.
As examples:
- Mercury spillage
- Corrosive fluid spillages when they are demonstrated to be exceptional, however
when they are noticed to be systematic they cannot be considered as non-typical.
DECISION STEP E - CUMULATIVE CORROSION
The corrosion in this area has been blended out previously and only at latest
inspection the cumulative blend out now exceeds allowable limits as defined by the
manufacturer (e.g. SRM, SB, etc.).



10. REQUIRED INSPECTION ITEMS (RIIs)

Tasks as RIIs. include those tasks that could result in a failure, malfunction, or
defect that endangers the safe operation of the aircraft if the task is not
completed properly or if operators use improper parts or material. If other
persons perform maintenance task, operators may authorize them to
accomplish their RII requirement, provided that manual satisfies the
regulatory requirements
10-1 List of Other Persons. Maintenance Organizations manual must include a
list of persons with whom Maintenance Organizationss have arranged for the
performance of any required inspections both within their organization and
within other organizations that perform maintenance on their behalf. This
listing must include a designation by occupational title of the personnel
authorized to perform each required inspection.
10-2 Certification. Maintenance Organizations grant an RII authorization to must
hold an appropriate airmans certificate. This is an air carrier qualification
requirement; the individual does not exercise that certificate when
accomplishing the RII. Maintenance Organizationss must formally notify each
of these individuals of their RII authorization as well as its scope.
10-3 RII Requirements. Maintenance Organizations should clearly identify RII
requirements on work forms, job cards, engineering orders, etc., or by any
other method consistent with their maintenance program. A primary concept
of the RII function is to prevent any person who performs any item of work
from performing any required inspection of that work. Therefore, it is
important that Maintenance Organizationss identify RIIs whenever possible so
that everyone knows that an RII is required.
10-4 Standards and Limitations. Maintenance Organizations must set
procedures, standards, and limits necessary for required inspections and
acceptance or rejection of the RII. Maintenance Organizationss should have
those procedures, standards, and limits necessary for the accomplishment of
required inspections. Maintenance Organizations must also have those
rocedures, standards, and limits necessary for the acceptance or rejection of
each of RIIs.
10-5 Procedures. Maintenance Organizations manual must include procedures
to ensure that you perform and complete all required inspections before
releasing the aircraft to service.

Tasks required RIIs will be noted as RII tasks.



11. MAINTENANCE CLOCK STARTING POINT
Unless otherwise specified by AIRBUS in the documentation of an aircraft at time
of first delivery, the starting point for calculation of the due dates or times of all
aircraft maintenance tasks is identified in the following paragraphs.
A. General Rule
The date of first Transfer of Title (ToT) may be used as the starting point for the
following:
- Systems / Power Plant tasks with intervals expressed in airframe FH, FC or
Calendar Time (except as identified in paragraph 2.0)
- Structure tasks with an interval quoted in Calendar Time
- Zonal tasks
NOTE: This may not be valid if the first ToT occurs more than 90 days after first
flight. In this situation specific guidance may be given to the operator at time of
delivery. If details are not available to subsequent operators then any task that
has not yet been accomplished shall be conservatively planned with reference to
first flight date.
First flight shall be used for all structure tasks with an interval quoted in FH, FC or
LDGS.
Tasks with intervals quoted in terms of component FH or component FC (e.g.
APU Hours, Engine Cycles, ACT FH) shall be counted from First Flight of the
component.
The time to start the clock for tasks with applicability determined by post-delivery
modification embodiment is the date of embodiment
B. Specific guidance
- For ALS Part 2 (DT-ALI) tasks:
The threshold is the time at which the maintenance task is first due.
+ Threshold limitations quoted in FC or FH count from first flight.
+ Threshold limitations quoted in Calendar Time may be counted from the
Transfer of Title to the first operator.
For repeat maintenance tasks, the interval usage parameter (Calendar Time, FC
or FH) is counted from the time the task was previously performed.
In cases where the first maintenance is accomplished very early, the next
inspection can be performed at the threshold if the period (Calendar Time, FC or
FH) between initial task accomplishment and the threshold is greater than the
interval.
When alternative inspection methods are provided, the next interval applicable is
the one associated with the inspection method used at the previous inspection.
"Touch and Go" cycles can be neglected if they are less than 5% of the total
number of Flight Cycles up to threshold inspection or between two consecutive
inspections. Each "Touch and Go" cycle above 5% is to be counted as one Flight
Cycle, up to threshold inspection or between two consecutive inspections.
- For ALS Part 3 (CMR) tasks:
Limitations quoted in FH or Calendar Time may be counted from the Transfer of
Title to the first Operator. This policy is agreed with EASA in consideration of the
very low number of FH performed between first flight and delivery, and the
methodology used to define the value of CMR task limitations.
Limitations quoted in FC count from first flight.
- For ALS Part 4 (ASM) tasks:


Limitations controlled at aircraft level and quoted in Calendar Time count from
the Transfer of Title to the first operator
Limitations controlled at aircraft level and quoted in FH, FC or LDGS count from
first flight.
Limitations controlled at component/subassembly level and quoted in Calendar
Time, FH, FC or LDGS count from the date at which the component/item
accomplishes the first flight for which it will undertake its intended function.
- For ALS Part 5 (FAL) tasks:
Limitations quoted in Calendar Time may be counted from the Transfer of Title
to the first operator.
Limitations quoted in FH or FC count from first flight.
- For an overhauled landing gear or a new landing gear installed after first
Transfer of Title: the start date for Calendar Time tasks is the date of the gears
first flight after installation. If this first flight takes place more than 90 days after
installation contact Airbus Maintenance Programs Engineering front desk:
Sched.Maint@airbus.com.
- For equipment having intervals defined by the vendor (VR) or by National
Requirements (NR): the starting point is the date of manufacture or date of
overhaul (for Calendar Time tasks) or the first flight for which it will undertake its
intended function (for FH and FC tasks) unless otherwise stated by vendor or
National Authority.
- For components addressed by Airworthiness Directive (AD): as stated in
the AD.
- For components that are transferred between aircraft:
If the required task on the transferred component is performed as part of the
installation process, then the next performance of the task counts from the
installation date. Otherwise:
For system and structural components transferred between aircraft, the
threshold for Calendar Time tasks is counted from either the date at which the
aircraft to which it was originally fitted had its first Transfer of Title (if applicable)
or, for a new component installed after delivery, the date at which the component
accomplishes its first flight.
For structural components transferred between aircraft, the threshold for FH, FC
or LDGS tasks is counted from the date at which the component accomplishes its
first flight.
For system components transferred between aircraft, the threshold for FH and
FC tasks is counted from either the date at which the aircraft to which it was
originally fitted had its first
Transfer of Title (if applicable) or, for a new component installed after delivery, the
date at which the component accomplishes its first flight.
Source
Calendar
Time Flight Hours
Flight Cycles
or
Landings
SYSTEM TOT TOT TOT
MRBR STRUCTURE TOT 1st Flight 1st Flight
ZONAL TOT TOT TOT


Source
Calendar
Time Flight Hours
Flight Cycles
or
Part 1 1st Flight 1st Flight 1st Flight
Part 2 TOT 1st Flight 1st Flight
ALS Part 3 TOT TOT TOT
Part 4 (aircraft level) TOT 1st Flight 1st Flight

Part 4 (component
level) 1st Flight 1st Flight 1st Flight
Part 5 TOT 1st Flight 1st Flight
LDG overhaul or installation of new
1st Flight
after N/A 1st Flight
gear after first TOT installation
NR,VR Date of Date of Date of

Maunufature
or
Maunufature
or Maunufature or
Overhaul * Overhaul * Overhaul *
AD see AD see AD see AD
* unless otherwise stated in Vendor or National Authority
documentation
12. IMPLEMENTATION PERIOD
A. GENERAL
The IMPLEMENTATION PERIOD is a Grace period for the first time
accomplishment of new tasks added to a Maintenance Program of an aircraft
already in service in case there is no specific note of compliance date.
The following paragraphs suggest Implementation Periods for the tasks originating
from the various MPD source documents. The Implementation Period, often
referred to as a Grace period, is to assist with first time accomplishment of new
tasks added to a maintenance program of an aircraft already in service.
B. AD
The compliance date is identified in the AD.
C. Airworthiness Limitations Items (ALI) ALS Part 2
ALI grace periods must be handled on a case by case basis, using specific
utilization data from concerned aircraft. It would be ensured that there do not
exceed the limitation without prior agreement with the manufacturer, the local
airworthiness authority and the certificating authority. In exceptional circumstances
an ALI may be issued which is already overdue on a particular aircraft. In such
cases Vietnam Airlines will contact manufacture (Airbus) to provide guidance for
specific advice.
D. Certification Maintenance Requirements (CMR) ALS Part 3


In theory, a CMR cannot be added, or an existing CMR made more restrictive, to
an in-service aircraft. All CMRs should be published before the subject design
feature enters service, whether this is on the basic aircraft or as a result of a
modification. If delays occur in CMR document approval it is possible that a CMR
becomes valid after EIS. In this case, the CMR document transmittal letter will
advise an appropriate grace period before first time accomplishment.
E. Aging System Maintenance (ASM) ALS Part 4
Aging Sytem Maintenance tasks are being established in order to allow operation
of aircraft systems beyond their original qualification. Beyond this point, ageing
effects may affect the characteristics leading to an increased potential for failure.
The Part 4 of the Airworthiness Limitations Section (ALS) will be refered to take
the maintenance actions together with their limitation to help to qualify the systems
for continued operation.
F. Fuel Airworthiness Limitation Items (FAL) ALS Part 5
On aircraft that have already exceeded the task threshold, It is recommended that
the FAL tasks are performed at the operator's next scheduled structural inspection
at 6 YE or 12 YE.
G. MRB Report and MRB Report Temporary Revision (TR)
MRB Report (MRBR) tasks arise from a theoretical analysis of the aircraft prior to
entry into service. Tasks are categorized according to whether they are associated
with hidden or evident conditions and according to their contribution to the
avoidance of safety and non-safety related failure effects. Depending on Vietnam
Airlines qualifications and overall VAECO maintenance experience, adjustments to
initial maintenance program tasks and intervals approved by CAAV.
Vietnam Airlines suggest that a local guideline could be as follows:
For Systems/APU/Power Plant and ZIP tasks
Perform at the next due interval. This might not be the next interval (for which the
planning may be completed) but it would be expected in the following one.
NOTE: If task elapsed time is short and any possible corrective action is easily
addressed, Vietnam Airlines consider first performance of at least the FEC 5 and 8
tasks in the next convenient 750 FH / 750 FC / 100 days package.
NOTE: It is recognized that in some cases access for tasks with higher interval
(e.g. 24000 FH, 80 MO) is not available at the next C1 or C2 check events (where
typically tasks with intervals 7500 FH / 15000 FH, 5000 FC / 10000 FC, 24 MO / 48
MO are performed), for example, fuel tank entry, galley or lavatory removal. In
these cases, unless stated otherwise in the MRB Report transmittal letter,
recommend accomplishment at the next due interval that is typically a 6 YE check
event.
For Structure Tasks with CALENDAR threshold/interval
A revised CALENDAR requirement is normally associated with findings from
environmental impacts like corrosion, water ingress etc. It is recommended to
perform the task as soon as possible on at least one aircraft in the fleet in order to
help make this assessment. Delay inaccomplishment may lead to higher repair
costs but not to a loss of continued airworthiness. Note that if a safety concern
exists, a new CALENDAR task recommendation on an in service aircraft would be
promulgated by ISB (and possibly AD) in addition to inclusion in the MRB Report.
For Tasks related to EWIS


On aircraft that have already exceeded the task threshold, recommend that the
ATA 20 tasks with (EWIS) after task description are performed at next convenient
check opportunity unless access is assessed as insufficient to perform the task
without exceeding the scheduled out-of-service period. In this case, the task
should be performed at the next suitable access opportunity (e.g. a structural
inspection at 6 YE or 12 YE) but not exceeding the task interval counting from the
MRBR Rev. 12 approval date (April 2007).
H. Inspection Service Bulletins / All Operator Telexes
As for AD, these documents normally include a recommended compliance time.
Where this is not stated, it is recommended that Vietnam Airlines follows the same
guidance as for the MRB Report.
I. Service Information Letters
It is recommended that Vietnam Airlines follows the same guidance as for the MRB
Report.
13. GLOSSARY
Check
Task performed to ensure that a system or component is still serviceable
(check of bottle weight, check of firing circuit continuity, etc.) or that pressures
or fluid levels are correct (See also Visual Check).
Visual Check
An observation to determine that an item is fulfilling its intended purpose. Does
not require quantitative tolerances. This is a failure finding task.
Detailed Visual Inspection or Detailed Inspection
Intensive visual check of a specified detail, assembly or installation for evidence
of damage or irregularity. The inspection may require surface cleaning,
elaborate access procedures including removal of components where
necessary and the use of such inspection aids as a flash light, mirrors,
magnifying glass, etc.
Functional Test
A quantitative check to determine if one or more functions of a system/sub-
system or component perform, within specified limits.
This task may call for the use of special test equipment.
General Visual Inspection
A visual inspection of an interior or exterior area, installation or assembly to
detect various damage, failure or irregularity. This level of inspection is made
under normally available lighting conditions such as daylight, hangar lighting,
flashlight or drop-light and may require removal or opening of access panels or
doors. Stands, ladders or platform may be required to gain proximity to the area
being checked.
Repeat Interval
The maximum permitted period (for all tasks not performed on a sampling
basis) that can separate two consecutive accomplishment of the task.


Lubrication
Term covering all types of lubricant application by grease gun, squirt can,
spray, brush or hand, for the purpose of maintaining the inherent design
operating abilities of an item.
Limit of Validity
It is the period of time, expressed in appropriate units (e.g. flight cycles) for
which it has been shown that the established inspections and replacement
times will be sufficient to allow safe operation and in particular to preclude
development of widespread fatigue damage.
Maintenance Task
An action or set of actions, including corresponding planning data, required to
achieve a desired outcome which maintains an item (component, system/ sub-
system, structure) in, or restores an item to, serviceable condition. This term
includes inspection and determination of condition.
Maintenance Significant Item
Item identified by the manufacturer, whose failure
- Could affect safety (ground or flight), and/or
- Is undetectable during operation, and/or
- Could have significant operational economic impact, and/or
- Could have significant non-operational economic impact.
Operational Test
A task to determine qualitatively that an item is fulfilling its intended purpose.
This task may include the reading of the aircraft instruments but does not
require the measurement of tolerances.
Replacement
The action whereby an item is removed and another new or restored item is
installed in its place.
Restoration
Term covering all actions (on/off the aircraft) necessary to return the item to a
specific standard.
Sampling
The monitoring and/or withdrawal of selected devices from service to permit
determination of their condition at predetermined progressive intervals.
Special Detailed Inspection
An intensive check of a specific location requiring some special technique such
as non-destructive test techniques, dye penetrated, high-powered
magnification... and that may require disassembly procedures.

Structure Significant Item
A structural detail, structural element or structural assembly which is judged
significant by the manufacturers because of the reduction in aircraft residual
strength or loss of structural function which are consequences of its failure.
Threshold
Limit deadline for all tasks not performed on a sampling basis at which the task
must be accomplished for the first time (subsequent accomplishment deadlines
are rained by adding the repeat interval and its multiples to the threshold).
Touch and go
A Touch and go is a landing in which an aircraft touches the runway and does
not come to a full stop prior to commencing an additional flight.

14. ABBREVIATIONS
The following abbreviations are used through out the present document:
AA : Airworthiness Authorities
A/C : Aircraft
AC : Alternating Current
AC : APU Change
ACARS : Aircraft Communication Addressing and Reporting System
ACC : Active Clearance Control
ACT : Additional Center Tank
ACAS : Airborne Collision Avoidance System
ACMS : Aircraft Condition Monitoring System
ACP : Area Call Panel
ACR : Avionics Communication Router
AD : FAA Airworthiness Directive
ADCN : Aircraft Data Communication Network
ADF : Automatic Direction Finder
ADIRS : Air Data and Inertial Reference System
ADIRU : Air Data/Inertia Reference Unit
AESS : Aircraft Environment Surveillance System
AFDX : Avionics full Duplex
AFM : Airplane Flight Manual
AFMS : Auxiliary Fuel Management System
AFS : Automatic Flight System
AFT : Rear

AGCM : Airborne Ground Check Module
AGU : Air Generation Units
AH : APU Operating Hours
AIB : Airbus
AIDS : Aircraft Integrated Data System
ALI : Airworthiness Limitation Item (ALS Part 2)
ALS : Airworthiness Limitation Section
AMM : Aircraft Maintenance Manual
AMT : Aircraft Maintenance Task Reference
AMTOSS : Aircraft Maintenance Task Oriented Support System
AOL : All Operators Letter
AOT : All Operator Telex
AOW : All Operator Wire
AP : Autopilot
APU : Auxiliary Power Unit
ARO : Anti Roll Out
ASM : Ageing System Maintenance (ALS Part 4)
ASSY : Assembly
ATA : ATA Specification
ATC : Air Traffic Control
ATT : Attitude
BAT : Battery
BCL : Battery Charge Limiter
BCRC : Bulk Crew Rest Compt.
BITE : Built-In Test Equipment
BSCU : Braking & Steering Control Unit
CAS : Cabin Attendant Seat
CFDS : Centralized Fault Display System
CFMI : CFM International
CMP : Configuration, Maintenance, Procedure and Dispatch
Standards for Extended Diversion Time Operations (ETOPS)
CMR : Certification Maintenance Requirements (ALS Part 3)
CN : Consignee de Navigabilit (French Airworthiness Directive)
COMPT : Compartment
CPCP : Corrosion Prevention and Control Program

CRR : Crew Rest Room
CSU : Command Sensor Unit
CVR : Cockpit Voice Recorder
CWB : Center Wing Box
CY : Cycle
D : Deleted
DC : Direct Current
DDRMI : Digital Data Radio Magnetic Indicator
DET : Detailed Inspection
DFDR : Digital Flight Data Recorder
DGAC : Direction Gnrale de lAviation Civile (French Airworthiness
Authority)
DI : Detailed Inspection
DMC : Display Management Computer
DS : Discard
DT : Damage Tolerance
DU : Display Unit
DY : Day
EASA : European Aviation Safety Agency
EC : Eddy Current Inspection Method
ECAM : Electronic Centralized Aircraft Monitoring
ECU : Engine Control Unit
EDP : Engine Driven Pump
EFIS : Electrical Flight Instrument System
EIS : Electronic Instrument System
ELAC : Elevator and Aileron Computer
ELT : Emergency Locator Transmitter
EMER : Emergency
EN : Endoscope Inspection Method
ESS : Essential
ETOPS : Extended-range Twin-engine Operation Performance
Standard
EVAC : Evacuation
EVMU : Engine Vibration Monitoring Unit
EWIS : Electrical Wiring Interconnection System
EZAP : Enhanced Zonal Analysis Procedure

EXTIR : Extinguisher
FAA : United States Federal Aviation Administration
FAC : Flight Augmentation Computer
FAL : Fuel Airworthiness Limitations (ALS Part 5)
FADEC : Full Authority Digital Engine Control
FC : Flight Cycle
FC : Functional Check
FCOM : Flight Crew Operating Manual
FCRC : Flight Crew Rest Compt.
FD : Flight Director
FDUI : Flight Data Interface Unit
FEC : Failure Effect Category (5 evident safety; 6 evident
operational; 7 evident economic; 8
hidden safety; 9 hidden non safety)
FH : Flight Hours
FL : Flight Hours
FR : Frame
FWD : Forward
GAPCU : Ground and Auxiliary Power Control Unit
GCU : Generator Control Unit
GLC : Generator Line Contactor
GPCU : Ground Power Control Unit
GPWS : Ground Proximity Warning System
GSE : Ground Support Equipment
GSM : Global System for Mobile communications
GRP x : Weight variant group x
GSE : Ground Support Equipment
GVI : General Visual Inspection
HDG : Heading
HFEC : High Frequency Eddy Current Inspection Method
HIRF : High Intensity Radiated Fields
HP : High Pressure
HPT : High Pressure Turbine
HR : Hour
I : Repeat Interval

IAE : International Aero Engine
IDG : Integrated Drive Generator
IFES : In Flight Entertainment System
INTRO : Introduction
ISB : (Inspection) Service Bulletin
ISIS : Integrated Standby Instrument System
JAA : Joint Aviation Authorities
JAR : Joint Aviation Requirement
LD : Landing
LD : Lower Deck
LDF : Lower Deck Facility
LDL : Lower Deck Lavatory
LDMCR : Lower Deck Mobile Crew Rest
LE : Leading Edge
LEP : List of Effective Pages
LFEC : Low Frequency Eddy Current Inspection Method
LGCIU : Landing Gear Control and Interface Unit
LH : Left Hand
LP : Low Pressure
LPC : Low Pressure Compressor
LPT : Low Pressure Turbine
LTA : German Airworthiness Directive
LU : Lubrication
LUR : Low Utilization Recommendation
LWR : Lower
MCDU : Multipurpose Control and Display Unit
MH : Man hours
MLG : Main Landing Gear
MO : Month(s)
MOD : Modification
MPD : Maintenance Planning Document
MRB : Maintenance Review Board
MSG : Maintenance Steering Group
MSI : Maintenance Significant Item
MSN : Manufacturer Serial Number

N : New
ND : Navigation Display
NDT : Non Destructive Testing
NLG : Nose Landing Gear
NR : National Requirements
NRV : Non Return Valve
NT : Note
NTM : Non Destructive Testing Manual
OP : Operational Check
PCU : Power Control Unit
PFD : Primary Flight Display
POB : Pressure off Brakes
PREP : Preparation
PTT : Press to Test
PTU : Power Transfer Unit
PW : Pratt & Whitney
PWS : Predictive Windshear System
QAD : Quick Attach Detach
R : Revised
RAT : Ram Air Turbine
RF : Resonance Frequency Inspection Method (e.g. Tap Test)
RH : Right Hand
RMP : Radio Management Panel
ROTO : Roto-test Inspection Method with Eddy Current Roto-probe
RS : Restoration
RSVR : Reservoir
S : Sampling
SB : Service Bulletin
SDI : Special Detailed Inspection
SIL : Service Information Letter
SMR : Scheduled Maintenance Report (engine)
SOV : Shut off Valve
SSI : Structure Significant Item
ST (G) R : Stringer
SV : Servicing

SYS : System
TBD : To be determined
TCAS : Traffic Collision Avoidance System
TE : Trailing Edge
THS : Trimmable Horizontal Stabilizer
TOC : Table of Content
TPIS : Tyre Pressure Indication System
TPS : Temporary Protection System
TR : Temporary Revision
UD : Upper deck
ULB : Underwater Locating Beacon
US : Ultrasonic Test Inspection Method
VC : Visual Check
VCC : Video Control Center
VHF : Very High Frequency
VR : Vendor Recommendation
YE : Year

15. REVISION
The updating of the present A321 AIRRAFT MAINTENANCE SCHEDULE is under
VIETNAM AIRLINES responsibility based on the periodic revisions of the AIRBUS
INDUSTRIE A319/A320/A321 Maintenance Planning Document (MPD) and other
related technical documentations.


16. ASSISTANCE AND INFORMATION
Any query or comments regarding
* The A319/A320/A321 MPD should contact:
AIRBUS
CUSTOMER SERVICES
Maintenance Planning & Services
B.P. No. 33
F-31707 Blagnac Cedex
FRANCE
or TLX : 530 526 F
FAX : 33 (0) 5 61 93 28 72
SITA : TLSBT7X
sched.maint@airbus.com

* The A321 MAINTENANCE SCHEDULE should contact:
VIETNAM AIRLINES
HEAD OFFICE
TECHNICAL DIRECTOR
200 NGUYEN SON St., LONG BIEN Dist,
HANOI
VIETNAM
TEL: 84.4.38731774
FAX: 84.4.38273004
SITA: HDQEPVN


SECTION 2

LINE MAINTENANCE CHECKS



2-LEP R 1 SEP 2013
2-TOC R 1 SEP 2013
2-GENERAL INTRODUCTION R 1 SEP 2013
2-PRE-FLIGHT / TRANSIT CHECK LISTS R 1 SEP 2013
2-TERMINAL CHECK LISTS R 1 SEP 2013
2-TERMINAL CHECK LISTS R 2 JAN 2014
2-TERMINAL CHECK LISTS R 3 SEP 2013
2-WEEKLY CHECK LISTS R 1 SEP 2013
2-WEEKLY CHECK LISTS R 2 JAN 2014
2- WEEKLY CHECK LISTS R 3 JAN 2014

ISSUE: JAN 2014 SECTION 2 - LEP PAGE 1


SECTION 2

LINE MAINTENANCE CHECKS

TABLE OF CONTENTS

SUBJECT

GENERAL
LINE MAINTENANCE CHECK LISTS

ISSUE: SEP 2013 SECTION 2 - TOC PAGE 1

I.A.W AMS A321 - Issue 14 Amd 01 A321 PRE-FLIGHT / TRANSIT CHECK Page 1 of 3

FROM No: VNA-TE-F36
Issued: 00 / Mar. 2009

QUY TRNH
KIM TRA TRC KHI BAY/GIA HAI LN BAY
PRE-FLIGHT/TRANSIT CHECK

Aircraft Type A321 Effectivity A/C Reg. No:

Check Definitions and Notifications
a) A PRE-FLIGHT/TRANSIT Check shall be performed before each flight but not earlier than 2 hours before
the flight. (It includes also the correction of troubles reported in the log book if the airworthiness of the aircraft
is affected).
b) All fluids uplifted during the PRE-FLIGHT/TRANSIT Check must be recorded on the current page of the
aircraft technical log

Safety Pre-caution at aircraft arrival
In accordance with Line Maintenance / Group Handling Procedures
Ensure parking area is clear of foreign objects or any other obstructions, check operation of aircraft exterior lights during
taxiing in, chock nose wheels fore and aft.

Item

Title / Task Description / Requirement
1 Remove all nose landing gear and main landing gear safety pins (before first flight of the day).
2 Review and action Technical Log book and Cabin Defect Log book, transfer entries to Technical Log
book where necessary (transit only).
3 a. Do a safety check of flight compartment for proper position of controls.
b. Energize the aircraft electrical network IAW AMM task 244100/2.
c. Check security box for general condition ref. AMS task VN257000-01.
4 Remove all protective covers and blanks (before first flight of the day).
5
Check battery 1 and 2 volts immediately before selection of GPU / APU or if power has been off
more than six hours.
BATT 1 AND 2 CHECK OFF
BATT 1 AND 2 VOLTAGE CHECK ABOVE 25.5V
Batteries voltage above 25.5V (battery capacity is above 50%).
If batteries voltage below 25.5V, a charging cycle of about 20 minutes is required.
BATT 1 AND 2 AUTO
EXT POWER ON
Check ECAM ELEC page, batteries contactor closed and batteries charging.
6 Inspect landing gear doors, wheels, brakes and tyres for condition. Check Oleo extensions appear
normal.
7 Do walk around inspection of the whole aircraft exterior and check for obvious signs of fluid leaks
and damage, loose or missing parts, obstruction of inlets / outlets, fuselage tail skid for damage of
ground contact during take off (transit only), navigation / communication system antenna, static
ports, TAT, pitot probes, AOA sensors, discharge indicators of oxygen and APU fire extinguisher.


Item

8 a. Drain water from each fuel tank (if the aircraft has been on the ground for six hours or more)
IAW AMM task 12-32-28-281-001 ref. AMS task 281100-01-2.
b. Obtain water free samples from bowser or Refueling truck prior to refueling.
c. Refuel the aircraft up to required dispatch quantity IAW AMM task 121128/3, Make sure that,
fuel uplift quantity discrepancy (between Aircrafts indicator and Bowsers indicator) is within limit
(reference: APPENDIX 1) - Note: This requirement apply to all flights dispatched from
Vietnames Airports only.
Record uplift / content in the Technical Log book.
d. Ensure refuel coupling cap is in place and secured.
e. Ensure dipsticks are retracted and secured.
9 a. Inspection/Check of the Wheels and Tires IAW AMM task 32-41-00-210-002
b. Check and record tire pressure to aircraft technical logbook IAW AMM task 32-41-00-210-003
ref. AMS task 324100-01-1 (before first flight of the day).
10 Examine the torque link assembly. Make sure that it is correctly installed and there is no damage or
wear.
11 Do an external inspection of engines including fan, inlet cowl, turbine and exhaust nozzle and
cowlings for security.
12 Check engine oil on ECAM within 30 minutes of engine shut down and hydraulic level, uplift and
record in Technical Log book if necessary (transit only).
13 Service toilet and fresh water systems as required, check for fluid leaks at toilet and water servicing
panels. Rectify defects before flight.
14 Ensure any corrective actions made in the Technical Log book have been cleared.
15 RVSM REQUIREMENTS (ref. 748/TCTHK-BCL 25th., July, 2007):
a. Inspection/Check of the Pitot Probes, Static Probes and AOA Sensors IAW AMM task 34-13-00
page block 601 (before first flight of the day).
b. Do a visual inspection around the static probes (left and right sides).
Note:
In order to help the operator to determine easily the area to be inspected, Airbus proposes to
draw on the fuselage some red marks as defined in SIL 34-064 (corners of a squares).
These marks are for information only and aim at easing the pre-flight check. In addition, they
are not mandatory to archieve the RVSM certification. In case of scratches or dents around
the static ports, the only applicable documentation is the SRM ATA 53.
16 Do security inspection of the whole aircraft as per MECHANIC section in the form VNA-SQ-F81-09
(Aircraft Normal Security Check Report) and take the signature.
CAUTION: The Emergency Exit Doors 2LH/RH & 3LH/RH were always in armed condition after MOD
A321-11-014-2010. So check the slide control handle of this Emergency Exit Doors in armed position
and placard CH M CA KHI THOT HIM / EMERGENCY USE ONLY on them for presence.
17 FINAL WALK AROUND INSPECTION:


Item

a. Ensure all doors and panels are secured, landing gear pins removed and stowed, engine intakes
and air inlets clear of foreign objects.
b. Ensure no damage has been caused by ground equipment or during baggage loading.
c. Ensure towing lever is in normal (spring loaded) position and towing pin is removed.
d. Remove wheel chocks (upon flight crew instruction).

APPENDIX 1:
Fuel uplift quantity discrepancy limit
(between Aircrafts indicator and Bowsers indicator)
(by fuel uplift quantity)

Fuel uplift quantity (Kg)
(by aircrafts indicator)

Discrepancy (%)

Discrepancy (Kg)
0 1000 Kg 5.8 58
1000 Kg 2000 Kg 4.5 90
2000 Kg 5000 Kg 3.8 190
5000 Kg 10000 Kg 2.6 260
10.000 Kg 20000 Kg 2.3 460
More than 20000 Kg 1.6 1600
(with uplift quantity less than 100,000 Kg)

Safety Pre-caution at aircraft departure
Dispatch aircraft in accordance with Line Maintenance / Ground Handling Procedures
Prior to engine start, ensure area is free of any loose objects and obstruction, any remaining entry / service doors are
secured closed and wheel chocks removed.

RVSM Capability
Prior to every flight, review the following and action as required:
a) Aircraft technical log, all outstanding current and carried forward defects (ADD), Out-of-Phase Maintenance
(OPM) sheets, Notice-To-Crew (NTC) and Minimum Equipment List (MEL) items to ensure the aircraft is RVSM
CAPABLE.
b) Write in techlog if the A/C is not RVSM capable.

I.A.W AMS A321 - Issue 14 Amd 01 A321 TERMINAL CHECK Page 1 of 3
FROM No: VNA-TE-F37
QUY TRNH KIM TRA CUI NGY
TERMINAL/DAILY CHECK OR EQUIVALENT

Aircraft Type A321 Affectivity A/C Reg. No:

a) The TERMINAL Check shall be performed in principle every day and in any case interval must not exceed 36
hours elapsed time.
b) All fluids uplifted during the TERMINAL CHECK must be recorded on the current aircraft Technical Log page.
c) Preflight/Transit check is included in this terminal check procedure. If time to next flight is more than two (02)
hours, then it is required to perform preflight check again.

In accordance with Line Maintenance / Ground Handling Procedures
Ensure parking area is clear of foreign objects or any other obstruction, check operation of aircraft exterior lights during
taxiing in, chock nose wheels fore and aft

Item Title / Task Description / Requirement
1
Carry out Transit Check IAW form A321 - PRE-FLIGHT / TRANSIT CHECK.
2
Install wheel chocks, nose landing gear and main landing gear safety pins.
3
Install all protective covers and blanks.
4
Check seat covers and slide-raft covers for condition.
5 Check the serviceable status of the First Aid Kits and Medical Kits (seal, expired date, condition,
etc), replaced if expired or has been used.
6
Do the following operational tests of:
a. External lights IAW AMM task 334100/5, 334200/5, 334600/5, 334700/5, 334800/5 and
334900/5.
b. Cabin lighting and passenger signs IAW AMM task 33-21-00-710-001.
7
Check general cockpit lighting, emergency torches and replenish spare bulb box as required.
8
Check lavatories for:

a. General condition, cleanliness and evidence of water leakage.
b. Effectiveness of waste disposal self-closing flaps and access doors, verify containment
capability.
c. Damage and distortion to the waste bins and cleanliness and freedom from debris of the bin
compartment.
d. Serviceability of ashtrays both inside and outside of the lavatories.
e. "NO SMOKING" signs both inside and outside of the lavatories.
9 With parking brake applied, check brake wear indicators of heat pack, leakage and overheating
10 Do a general visual inspection of landing gear, landing gear doors and wheel IAW AMM
task 05-27-00-200-001, including:

a. Nose landing gear and main landing gear proximity switches for security and cleanliness.
b. Main landing gear shock absorber for signs of leakage and normal extension.
c. Main landing gear sliding tube for scoring / damage and normal extension.
d. Nose landing gear shock absorber for signs of leakage and normal extension.


e. Wheels and tires (rim damage, sheared / missing tie bolts).
f. Hydraulic leaks (gear doors closed) .
g. Nose landing gear taxi light for cleanliness.
CAUTION: The Emergency Exit Doors 2LH/RH & 3LH/RH were always in armed condition after MOD
A321-11-014-2010. So check the slide control handle of this Emergency Exit Doors in armed position
and placard CH M CA KHI THOT HIM / EMERGENCY USE ONLY on them for presence.
11
Do the following passenger cabin check:

a. Passenger cabin for general condition and cleanliness.
b. Galleys for general condition, cleanliness and evidence of water leakage.
c. Check the following emergency equipment for:
Proper installation/Location.
Damaged.
Security Seal (if having)
(Emergency Equipment Lits is attached in Techlog)
d. Wing upper surfaces and control surfaces through cabin windows for general condition and
evidence of fluid leakage.
12 Records APU hours / cycles using ECB (APU Data/Oil Page) and DMU IAW AMM task 31-36-
00-740-006.
13
Do a general visual inspection of the APU area including:

a. Air intake: flap closed.
b. Door: closed and secured.
c. Drain mast, drains and vents.
d. Exhaust.
e. Fire extinguisher overpressure indicator.
14 Do a general visual inspection from the ground of the stabilizers and the cone / rear fuselage
IAW AMM task 05-23-00-200-001, including:

a. Trimmable horizontal stabilizers and elevators.
b. Fin and rudder.
c. Static dischargers.
15 Do a general visual inspection of the upper half of fuselage from the ground as far as visible
IAW AMM task 05-22-00-200-001. Make sure that there are no signs of corrosion, cracks or
damage.
16 Do a general visual inspection of the lower half of fuselage from the ground as far as visible
IAW AMM task 05-21-00-200-001, including:

a. Avionics equipment vent air inlet valve.
b. Fresh water and wastewater drain masts.
c. Pitot probes, static ports, and AOA sensors IAW AMM task 34-13-00-200-001.
d. Exterior lights for cleanliness.
e. Radome: latches positively locked.
f. Crew oxygen cylinder overpressure indicator: green disc in place.
g. Outflow valve: no obstruction.
h. Antennas and beacon.


17 Do a general visual inspection of all service panels and doors as far as visible from the Ground
IAW AMM task 05-28-00-200-001.
18 Do a general visual inspection of the wings as far as visible from the ground IAW AMM task 05-
25-00-200-001, including:

a. Leading edge slats.
b. Leading edge ventilation air intake: no obstruction.
c. Landing light for cleanliness.
d. Surge tank air intake: no obstruction.
e. Fuel tank overpressure protector disc: white cross in view.
f. Navigation and strobe lights.
g. Static dischargers.
h. Control surfaces, flaps and track fairings: no damage or fluid leakage.
i. Lower wing surface: evidence of fuel leakage.
19 Do a general visual inspection (as far as visible) of the power plants, the nacelles and the pylons
(cowlings closed) IAW AMM task 05-24-00-200-001, including:

a. Cowlings: panels, air outlets, security of latches.
b. Fan thrust reverser doors: latches secured (red indicator not protruding).
c. Drain mast and pylon drains: no obstruction or fluid leakage.
d. Access doors and over pressure doors: in place, closed and secured.
e. Engine air inlets: lip skins, inner and outer intake cowls.
f. Fan exhausts: acoustic lining, exit vanes and struts, thrust reverser blocker doors.
g. Turbine exhausts: 5th.Stage low pressure turbine blades, nozzle and plug (for damage and
metal deposit).
20
Do the following:

a. De-energize the aircraft electrical network IAW AMM task 244100/2.
b. Ensure all doors and service panels are properly closed and secured.
c. Ensure all required protective covers and blanks installed.

secured closed and wheel chocks removed

RVSM Capability
a) Aircraft technical log, all outstanding current and carried forward defects (ADD), Out-of-Phase Maintenance
(OPM) sheets, Notice-To-Crew (NTC) and Minimum Equipment List (MEL) items to ensure the aircraft is RVSM
CAPABLE.

I.A.W AMS A321 Issue 14 Amd 01 A321 WEEKLY CHECK Page 1 of 3
FORM No: VNA-TE-F38
QUY TRNH KIM TRA NGOI TRNG
WEEKLY/LINE1/LINE2 CHECK OR EQUIVALENT
Aircraft Type A321 Effectivity A/C Reg. No:

A/C Reg.
No.
Station Date
Tech
Log page

Work
Package

a) The Weekly Check shall be carried out within every 08 days.
b) All fluids uplifted during the Weekly Check must be recorded on the current aircraft Technical Log page.
c) Preflight/Transit and Terminal check is included in this Weekly Check procedure. If time to next flight is more than
two (02) hours, then it is required to perform Preflight/Transit check again.

In accordance with Line Maintenance / Ground Handling Procedures
Ensure parking area is clear of foreign objects or any other obstruction, check operation of aircraft exterior lights during
taxiing in, chock nose wheels fore and aft

Item Title / Task Description / Requirement MECH INSP
1
Carry out terminal check IAW form A321 - TERMINAL/DAILY CHECK OR
EQUIVALENT.

2 Clean all CRT/LCD screens.

3 Check crew / passenger seats and belts for general condition and attachment.

CAUTION: The Emergency Exit Doors 2LH/RH & 3LH/RH were always in armed
condition after MOD A321-11-014-2010. So check the slide control handle of this
Emergency Exit Doors in armed position and placard CH M CA KHI THOT
HIM / EMERGENCY USE ONLY on them for presence.

4 In passenger cabin:

a. Do a visual inspection of passenger compartment, including seat track
covers, ceiling panels, light covers, window panels, forward and aft partitions
and stowage, literature pocket and magazine rack, attendant seats, shroud
and cover on each lavatory ref. CMS task VN252000-01.

b. Do a detailed visual inspection of waste compartment for damages and
sealing. Make sure the flaps operate normally, repair if necessary ref. CMS
task VN253000-06.

c. Check pressure of emergency cylinder / accumulator of forward and aft
passenger / crew doors. IAW AMM task 52-10-00-210-004 ref. AMS task
521000-01-1.

d. Check emergency cylinder/accumulator pressure on pressure gauge IAW
AMM 52-22-00-200-001 ref. AMS task 522200-08-1.

e. Check pressure on portable oxygen cylinder gauges IAW AMM task 35-30-
00-210-004 ref. AMS task 353000-01-1.

f. Do a detailed inspection of portable oxygen mask IAW AMM task 35-30-00-
220-001 ref. AMS task 353000-07-1.

g. Cleaning of vacuum waste lines with chemical cleaning agent and crushed ice

5
a. Check the following emergency equipment for:
- Proper installation/location.
- Damaged.
- Security Seal (if having)
Note: Emergency Equipment Lits is attached in Techlog

6
a. Check all Lavatories as below for general condition and functional operation
as below.
- Waste Disposal Lid Spring Retention & Waste Enclosure Door Close
- Operational condition of Wash Basin Drain
- Lavatory Door Latch Sliding & Locking with Light On/Off
- Operational condition of Toilet Flushing
- Operational condition of Soap Dispenser and cleanliness
- Condition of Waste Compartment Fire Ext, Temp Indicator
- Condition of No Smoking Placard, Ashtray

7
a. Check all Galley as below for general condition and functional operation as
below.
- Galley Sink Drain, Clogging
- Operational condition and cleanliness of Galley Inserts (Oven, C/M, W/B,
refrigerator)
- Cleanliness of inside of Oven
- Drain Clogging of inside of Ice Drawer Compartment.

8
IFE System Checks
a. Apply for A321-MPES system:
- Test audio system IAW AMM task 23-33-00-710-002-A
- Test O/H video system IAW AMM task 23-36-00-710-001-A
- Operation check of the Video PA system
- Operation check of the Airshow system TASK 23-34-00-710-001-A
- Operation check of the Boarding Music system TASK 23-32-00-710-002-A
b. Apply for A321-DMPES system:
- Test of boading music, broadcast audio, broadcast video on O/H LCD, sky
map, video PA and audio announcement IAW AMM TASK 23-33-00-710-005-
A.
- Check the operation of all O/H LCD monitor.
- Carry Out Close Flight and Turn OFF IFE system after finish working.
c. Apply for A321-EFX system:
- Test of boading music, broadcast audio, broadcast video on O/H LCD, sky
map, video PA and audio announcement IAW AMM TASK 23-33-00-710-005-
A.
- Check AVOD on each B/C seats.
- Check the operation of all O/H LCD monitor.
- Carry Out Close Flight and Turn OFF IFE system after finish working

CAUTION: BEFORE ENTERING OR APPROACHING THE NLG / MLG WELLS / HYD COMPARTMENT MAKE
CERTAIN DOORS ARE LOCKED AND COLLARS FITTED (MLG DOOR ACTUATOR) IN OPENED POSITION BY
MEANS OF SAFETY PINS EQUIPPED WITH STREAMERS.
9
In nose landing gear and hydraulics compartment, do the following general
visual inspection of:

a. Nose landing gear wheel well including zone 124 IAW AMM task 05-21-20-
200-002.

b. Components: installation external leakage.

c. Doors: structure, hinges, up-lock assembly and operating mechanism.

10
In main landing gear and hydraulics compartment, do the following general
visual inspection of:

a. Main Gear Well and the Hydraulics Compartment (Zones 147 and 148) from
the ground IAW AMM task 05-21-40-200-003.

b. Do a general visual inspection of main landing gear bay IAW AMM task 05-
25-70-200-001.

c. Cylinder door and secondary door with main landing gear doors open.

d. Components: installation external leakage.

e. Doors: structure, hinges, up-lock assembly and operating mechanism.

11
In forward and aft cargo compartment, do the following general visual
inspection of:

a. Cargo compartment decompression, lining and floor panels IAW AMM task
25-50-00-200-002 ref. AMS task 255000-01-1.

b. Forward and aft cargo compartment door skin external surface.

12
Check IDG oil level and filter differential pressure indicator IAW AMM task 24-21-
51-200-010 ref. AMS task 242100-07-1.

13 Do the following operational tests of:

a. Emergency lights by TEST EMER LIGHT SYS push button IAW AMM task
33-51-00-710-001 ref. AMS task 335100-01-1.

b. AC emergency generation system IAW AMM task 24-24-00-710-001 ref. AMS
task 242400-01-2 (CMR task).

114
Check engine oil level and replenish IAW AMM task 12-13-
79-610-011.
a. L/H

b. R/H
15
Check APU oil level and replenish IAW AMM task 12-13-49-
612-001.

16
Check CFDS (PFR) for slow door opening/closing messages IAW AMS Task
323105-03-1, AOT A320-32A1390 Note:Threshold of this task is 800 FC.

17
Replacement of the QAR Disk IAW AMM task 31-33-52-600-004 for flight data
storage (Except A/C fitted with QAR P/N 2243800-73).

18 CERTIFY WEEKLY CHECK IN TECHNICAL LOG BOOK.

secured closed and wheel chocks removed

RVSM Capability
a) Aircraft technical log, all outstanding current and carried forward defects (ADD), Out-of-Phase Maintenance (OPM)
sheets, Notice-To-Crew (NTC) and Minimum Equipment List (MEL) items to ensure the aircraft is RVSM
CAPABLE.

CERTI FI CATE OF RELEASE TO SERVICE
The work recorded has been carried out in accordance with the requirements of VAR-145 for the time being in force and
in respect to that work the aircraft / aircraft equipment is considered fit for service.
Date: Signature:.......................... Stamp Holder:..............................Time (UTC):
The stamp / signature in the inspection column denote work has been carried out in accordance with the above quirements.


SECTION 3

SCHEDULED COMPONENTS MAINTENANCE


3- LEP R 1 SEP 2013
3- TOC R 1 SEP 2013
3.0- GENERAL INTRODUCTION N 1 SEP 2013
3.1- A321 ENGINE LIFE LIMITED PARTS R 1 SEP 2013
3.1- A321 ENGINE LIFE LIMITED PARTS R 2 SEP 2013
3.1- A321 APU LIFE LIMIT PARTS N 1 JAN 2014
3.2- A321 LANDING GEAR LIFE LIMITED PARTS N 1 SEP 2013
3.3- A321 SYSTEM LIFE LIMITED COMPOMENTS N 1 SEP 2013
3.4- A321 TIME CONTROLLED ITEMS LIST N 1 SEP 2013

ISSUE: JAN 2014

SECSION 3 - LEP

PAGE: 1


SECTION 3


TABLE OF CONTENTS

SUBJECT

SUB-SECTION 3.0: GENERAL INTRODUCTION
SUB-SECTION 3.1: A321 ENGINE/APU LIFE LIMIT PARTS
SUB-SECTION 3.2: A321 LANDING GEAR LIFE LIMITED PARTS
SUB-SECTION 3.3: A321 SYSTEM LIFE LIMITED COMPONENTS
SUB-SECTION 3.4: A321 TIME CONTROLLED ITEMS LIST

ISSUE: JAN 2013 SECTION 3 - TOC PAGE 1


ISSUE: SEP 2013 SECTION 3 - GENERAL PAGE 1
SECTION 3
1. General
This section of the A321 Maintenance Programme divides into the sub-sections as
follows:
- Sub-Section 3.1: A321 Engine/APU Life Limited Pars.
- Sub-Section 3.2: A321 Landing Gear Life Limited Parts.
- Sub-Section 3.3: A321 System Limited Components.
- Sub-Section 3.4: A321 Time Controlled Items List.

2. Sub-Section 3.1 - A321 Engine Life Limited Parts:

Life limited parts of the engine are published in the Time Limits Manual of the IEA
TLMs Engine Manual. The maximum life of an engine part is engine cycle that is
defined as any flight consisting of one take-off and landing regardless of the length
of flight or whether or not thrust reverser is used on landing. Each touch and go is
considered an additional cycle. Parts must not be used after the total cycles for a
part has equaled the maximum permitted for that part.

3. Sub-Section 3.2 - A321 Landing Gear Life Limited Parts:

3.1 This sub-section of AMS related to ALS ALS Part 1 - Safe Life Airworthiness
Limitation Items and be included two tables: A321 LDG LLP SUB-PART 1-2 TABLE, A321
LDG LLP SUB-PART 1-3 TABLE which they are corrective ALS Sub-part 1-2 (Life
limits) and ALS Sub-part 1-3 (Demonstrated fatigue lives).

3.2 SUB-PART 1-2 TABLE: Life limits
Parts listed under this sub-part are those having a life limit less than the Limit Of
Validity (LOV) due to failure during fatigue tests and whose failure could result in a
catastrophic failure of the airplane.

3.3 SUB-PART 1-3 TABLE: Demonstrated fatigue lives
Parts listed under this sub-part are those having a demonstrated fatigue life without
failure but whose failure could result in a catastrophic failure of the airplane.
Where the values are less than the LOV, fatigue tests are still on going. For these
parts, the life limitation provided (in flight hours and/or flight cycles and/or landings
and/or calendar time, as applicable) is temporary waiting for finalization of the tests.
If the demonstrated fatigue life reaches the LOV, it will remain in sub-part 1-3, if the
part fails before the LOV, its Part Number (PNR) together with the life limit(s) will be
transferred to sub-part 1-2.


3.3 A321 LDG LLP sub-part 1-2 and 1-3 tables provide the applicable life
limitations only when PNR installations have been authorized. These tables do not
ensure that a PNR has been validated for a specific individual aircraft MSN. PNR
are authorized for installation on individual aircraft MSN by SB (and the associated
modifications), which are published by Airbus.
Life limitations quoted in sub-parts 1-2 and 1-3 are applicable to the undamaged
detail parts as listed, not to the assembly or the aircraft on which they are
installed. The limitation/replacement time indication is quoted on the same
line/block of lines as the PNR.

3.4 Aircraft model applicability headers indicate aircraft models. When x is entered
in the model number, it stands for any number within the limits of the list of
models e.g.:
A321-200 stands for: A321-211, A321-212, A321-213, A321-231...
Life limitation applicability is allocated according to the aircraft model affected,
e.g.:
X stands for: All aircraft models defined by the applicability of the column.

3.5 Traceability and replacement requirements
In order to maintain aircraft airworthiness, it is mandatory to replace parts
listed under sub-parts 1-2 and 1-3 at or prior to whichever of the life limitations
occurs first, after any necessary adjustment of the stated life limitations in
accordance with the instructions of paragraph 6 of ALS part 1, sub-part 1-0.
In the context of the ALS Part 1, the traceability means records that
clearly demonstrate the history of parts back to initial entry into service of the
part, so that life limitations are accurately applied. Traceability records may
comprise, but are not limited to, the following:
- Application history (aircraft type, model, weight variant, MSN i.e.
Manufacturer Serial Number, etc)
- Maintenance actions carried out (Airworthiness Directives,
modifications, repairs, inspections, etc),
- Life accumulation (accounting for any individual aircraft to which a part
may have been fitted).
Note: Traceability and monitoring of parts listed in sub-parts 1-2 and 1-3 is not
required when a systematic replacement applies.

3.6 The Life limit of Landing gears parts is not expressed in FH or FC but also
mentioned in LDG that be defined as an operation of an aircraft touching the
runway and coming to a full Stop or performing a touch and go. When the items
listed in the table reach the life limitations, disposal/quarantine action must be
taken.
Beside the LOV of aircraft as has been introduced in Section 1, the LOV related to
Landing Gear Safe Life Airworthiness Limitation Items as follows:

Aircraft series LOV in Landings
A321-200 60000 LDG


4. Sub-Section 3.3 - A321 System Life Limited Components:

4.1 This sub-section of ASM related to ALS part 4 Subpart 4.2 : SYSTEMS LIFE
LIMITED COMPONENTS. Components listed under this sub-section are those
having a life limitation, due to the difficulty to define a continued/enhanced
inspection program, and whose failure could contribute to an unsafe condition of the
airplane.

4.2. The initial entry into service is defined for the aircraft (systems installations) as:
- The date of Transfer of Title to the first Operator for limitations in
Calendar times, unless otherwise stated in any delivery documentation to
the first Operator.
- The date of aircraft first flight for limitations in flight hours and/or flight
cycles and/or landings.
The initial entry into service for the transferable systems items is defined as the
date at which the item accomplishes the first flight for which it will undertake its
intended function.
Note: Unless otherwise stated, this means for transferable items delivered on
new aircraft (i.e. from Airbus Final Assembly Line) that the life accumulated
before the aircraft delivery date/transfer of title date (e.g. as a result of test
flights) must be taken into account.

4.3 This tables provide the applicable limitations only for systems installations that
have been authorized. These tables do not ensure that a part number has been
validated for a specific individual aircraft MSN. Part numbers are authorized for
installation on individual aircraft MSN by Service Bulletins (and the associated
modifications) that is published by Airbus.

4.4 Limitation/Replacement time indication
- In computing items life, calculations must include flight hours and/or flight
cycles and/or landings and/or Calendar time (as applicable) since the
initial entry into service of the item (unless otherwise stated).
- Life limitations quoted in sub-section are applicable to the undamaged
items as listed, not to the aircraft on which they are installed. The
limitation/replacement time indication is quoted on the same line/block of
lines as the Part Number.

4.5 Traceability and replacement/maintenance requirements.
In order to maintain aircraft airworthiness, it is mandatory to replace items
listed under sub-section 3.3 at or prior to whichever of the life limitations occurs
first, after any necessary adjustment of the stated life limitation in accordance with
the instructions of the formula in ALS part 4-0, item 3, paragraph C.
In the context of the ALS Part 4, traceability means records that clearly
demonstrate the history of items back to initial entry into service, so that limitations
are accurately applied. Traceability records may comprise, but are not limited to,
the following:
- Application history (aircraft type, model, MSN i.e. Manufacturer Serial
Number, etc),


- Maintenance actions carried out (Airworthiness Directives, modifications,
repairs, inspections, etc),
- Life accumulation (accounting for any individual aircraft to which an item
may have been fitted).

4.6 Limitation applicability.
Limitation applicability may be allocated according to the aircraft MSN affected
Aircraft type, series and model, e.g.
X: stands for all aircraft of the column.
-231 stands for all -231 models of the column.

5. Sub-Section 3.4 - A321 Time Controlled Items List:

5.1This list is superseded A321 Hardtime/life limit Components List of previous
A321 AMS revision and requires the implementation of vendor recommendation.
Those tasks, which deal with time controlled items are to be seen as a planning
help. They are neither demanded by any source document nor by any certification
authority.

5.2 As well as previously, The purpose of this sub-section is to offer a direct access
by listing the off-aircraft tasks (from Sections 4 in AMS) affecting following
components/parts, got permission to use in the fleet (as show in IPC document)
which are to be controlled independently from the airframe:
- Items with time limitations (given by the manufacturer), which must be
removed and replaced (except consumables, expendables).
- Items which are tracked individually (independent from airframe or
installation areas).
- Items to be sent into shop for maintenance (off aircraft).

5.3 Task interval of the time controlled items related to SOURCE REF. column of
this list:
- VR : for time controlled item with intervals defined by the vendor: The
date of manufacture is the starting point unless otherwise stated by
vendor or national authority.
- MPD: for time controlled item with intervals defined by the aircraft
manufacture, the starting point for calculation of the intervals are the
same definitions of the all aircraft maintenance task in General Rules
paragraph of Section 1.

5.4 Tasks are shown as they are in their original sub-section which they are
regulated by task code (ALI, CMR, ASM, FAL, SYS), except task code related to
ALI, CMR, FAL - that is the tasks which corresponds to the ALS from part 1 to part
4.The remaining tasks shall not be considered as including all the safety related
tasks, neither only safety related tasks.


A321 ENGINE LIFE LIMITED PARTS

IN CASE OF INCONSISTENCY BETWEEN THIS TABLE AND THE V2533-A5 SERIES ENGINE MANUAL CHAPTER 5
THE ENGINE MANUAL CHAPTER 5 IS THE REFERENCE
ISSUE: SEP 2013

SECSION 3 - A321 ENG LLP PAGE: 1

TIME LIMITS V2533-A5 (AQ03)
Revdate: 01 Nov 2012

Itm Description P/N Limit (Cycle)
1
DICS,A/O STG.1 FAN 5A0337 20000
2
3
4
SHAFT,ASS'Y STUB 5A0895 20000
5
DISC,ASS'Y STG1.5-2.5 LPC 5R0159 20000
6
DISC,ASSY OF-STAGE 3-8 6A6473/6A7385/6B1380 16000
7
DISC,ASSY OF-STAGE 3-8 6A7401/6B1384 16000
8
DISC,ASSY OF-STAGE 3-8 6A8316/6B1386/6B1404 20000
9
DISC,ASSY OF-STAGE 3-8 6A7705/6B1385 20000
10
DISC ASSY STAGE 9 TO 12 HP 6A4156 8000
11
12
13
14
SHAFT,ASSY REAR HP COMPRESS 6A5867 20000
15
SHAFT,ASSY REAR HP COMPRESS 6A7711/6B1419 20000
16
SEAL, ROTATING-REAR 6A5869 20000
17
SEAL,AIR,HPT,2STG 2A3179 15000
18
19
20
21
HUB,TURB,1STG 2A2801 15000
22
23
SEAL,AIR,HPT,1STG, OUTER 2A1350 15000
24
25
SEAL,AIR,HPT,1STG, INNER 2A3086 15000
26
27
28
29
30
PLATE,RTNG,BLADE,HPT,2STG 2A2097 15000
31
32
33
SEAL AIR,TURBINE,INNER,STG6 3A3063 20000
34
35



ISSUE: SEP 2013


TIME LIMITS V2533-A5 (AQ03)

36
DISK,TURBINE STG7 3A2512 20000
37
38
39
40
41
42
DISK,TURBINE,STG4 3A1984 20000
43
44
45
46
SEAL,AIR,TURBINE,STG7 3A1741 20000
47
48
49
SEAL,AIR TURBINE STG5 3A2423 20000
50
51
52
SHAFT,LP TURBINE 5A1732 20000
53



ISSUE: SEP 2013


TIME LIMITS V2533-A5 (SQ03)
Revdate: Aug /12

Itm Description P/N Limit
1 DICS,A/O STG.1 FAN 5A0337 20000
2 DICS,A/O STG.1 FAN 5A1757 20000
3 SHAFT,ASS'Y STUB 5A0895 20000
4 DISC,ASS'Y STG1.5-2.5 LPC 5R0159 20000
5 DISC,ASSY OF-STAGE 3-8 6A7401/6B1384/6B1391 16000
8 DISC ASSY STAGE 9 TO 12 HP 6A7546 20000
9 SHAFT,ASSY REAR HP COMPRESS 6A5867 20000
10 SHAFT,ASSY REAR HP COMPRESS 6A7711/6B1419 20000
11 SEAL, ROTATING-REAR 6A5869 20000
12 SEAL,AIR,HPT,2STG 2A4157 20000
13 HUB,TURB,1STG 2A2801 15000
14 HUB,TURB,1STG 2A5001 20000
15 SEAL,AIR,HPT,1STG, OUTER 2A1350 15000
17 SEAL,AIR,HPT,1STG, INNER 2A3086 15000
20 HUB,TURB,2STG 2A3002 15000
21 HUB,TURB,2STG 2A4802 20000
22 PLATE,RTNG,BLADE,HPT,2STG 2A3426 15000
24 SEAL AIR,TURBINE,INNER,STG6 3A0363 20000
26 DISK,TURBINE STG7 3A2512 20000
32 DISK,TURBINE,STG4 3A1984 20000
36 SEAL,AIR,TURBINE,STG7 3A1741 20000



ISSUE: SEP 2013


Revdate: Aug /12

39 SEAL,AIR TURBINE STG5 3A2423 20000
42 SHAFT,LP TURBINE 5A1732 20000



ISSUE: SEP 2013



1
2
3
4
SHAFT,ASS'Y STUB 5A0895 20000
5
DISC,ASS'Y STG1.5-2.5 LPC 5R0159 20000
6
DISC,ASSY OF-STAGE 3-8
6A7401 / 6B1384 /
6B1391 16000
7
DISC,ASSY OF-STAGE 3-8
6A8316 / 6B1386 /
6B1404 / 6B1393 /
6B1405
20000
8
DISC,ASSY OF-STAGE 3-8 6A7705/6B1385/6B1392 20000
9
10
SHAFT,ASSY REAR HP COMPRESS 6A5867 20000
11
SHAFT,ASSY REAR HP COMPRESS 6A7711/6B1419 20000
12
SEAL, ROTATING-REAR 6A5869 20000
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
DISK,TURBINE,STG4 3A1984 20000
33
34



ISSUE: SEP 2013



35
36
37
38
39
40
41
42
43



ISSUE: SEP 2013


Revdate: May 01/11

1 DICS,A/O STG.1 FAN 5A0337 20000
2 DICS,A/O STG.1 FAN 5A1757 20000
3 SHAFT,ASS'Y STUB 5A0895 20000
4 DISC,ASS'Y STG1.5-2.5 LPC 5R0159 20000
8 DISC ASSY STAGE 9 TO 12 HP 6A7546 20000
9 SHAFT,ASSY REAR HP COMPRESS 6A5867 20000
10 SHAFT,ASSY REAR HP COMPRESS 6A7711/6B1419 20000
11 SEAL, ROTATING-REAR 6A5869 20000
12 SEAL,AIR,HPT,2STG 2A4157 20000
13 HUB,TURB,1STG 2A2801 15000
14 HUB,TURB,1STG 2A5001 20000
20 HUB,TURB,2STG 2A3002 15000
21 HUB,TURB,2STG 2A4802 20000
32 DISK,TURBINE,STG4 3A1984 20000



ISSUE: SEP 2013


Revdate: May 01/11



ISSUE: JAN 2014 SECTION 3 APU LIFE LIMIT PARTS

A321 AUXILIARY POWER UNIT - LIFE LIMIT PARTS
(APU PN: 3800708-1, PN: 4500001B)
IN CASE OF INCONSISTENCY BETWEEN THIS TABLE AND THE APU MANUAL, APU MANUAL IS THE REFERENCE

Description Part Number Serial Number Limit (Cycle)
1st Stage Rotor Assy.
3840161-1 08-03357-05775 30000
3840160-8 08-03357-05775 30000
Second Stage Turbine Rotor
3610894-11 10-156101-06712 10000
3840165-4 10-156101-06712 10000
Engine Compressor Impeller 3822391-6 10-162053-31041 30000
Turbine Shaft 3822504-3 10P29061 30000
3840161-1 08-03357-05784 30000
3840160-8 08-03357-05784 30000
3610894-11 10-156101-07089 10000
3840165-4 10-156101-07089 10000
Turbine Shaft 3822504-3 10P30197 30000
3840161-1 10-168522-01923 30000
3840160-8 10-168522-01923 30000
3610894-11 10-156101-07069 10000
3840165-4 10-156101-07069 10000
Turbine Shaft 3822504-3 10P29960 30000
3840161-1 10-168522-03278 30000
3840160-8 10-168522-03278 30000
3610894-11 10-156101-10982 10000
3840165-4 10-156101-10982 10000
Turbine Shaft 3822504-3 11P31548 30000
3840161-1 10-168522-00584 30000
3840160-8 10-168522-00584 30000
3610894-11 11-156101-01496 30000
3840165-4 11-156101-01496 30000
Turbine Shaft 3822504-3 11P31816 30000
3840161-1 10-168522-02877 30000
3840160-8 10-168522-02877 30000
3610894-11 10-156101-11979 10000
3840165-4 10-156101-11979 10000
Turbine Shaft 3822504-3 11P30676 30000
3840161-1 10-168522-02877 30000
3840160-8 10-168522-02877 30000
3610894-11 10-156101-11979 10000
3840165-4 10-156101-11979 10000
Turbine Shaft 3822504-3 11P30676 30000
3840161-1 10-168522-03808 30000
3840160-8 10-168522-03808 30000
3610894-11 10-156101-12059 10000
3840165-4 10-156101-12059 10000
Turbine Shaft 3822504-3 11P33468 30000
3840161-1 10-168522-02921 30000
3840160-8 10-168522-02921 30000
3610894-11 11-156101-01115 30000
3840165-4 11-156101-01115 30000
Turbine Shaft 3822504-3 11P34011 30000
1st Stage Rotor Assy. 3840161-1 10-168522-04327 30000



(APU PN: 3800708-1, PN: 4500001B)

3840160-8 10-168522-04327 30000
3610894-11 11-156101-01751 30000
3840165-4 11-156101-01751 30000
Turbine Shaft 3822504-3 11P36169 30000
3840161-1 10-168522-03543 30000
3840160-8 10-168522-03543 30000
3610894-11 11-156101-02940 30000
3840165-4 11-156101-02940 30000
Turbine Shaft 3822504-3 11P36676 30000
3840161-1 10-168522-04360 30000
3840160-8 10-168522-04360 30000
3610894-11 11-156101-02035 30000
3840165-4 11-156101-02035 30000
Turbine Shaft 3822504-3 11P37714 30000
3840161-1 10-168522-04691 30000
3840160-8 10-168522-04691 30000
3610894-11 11-156101-06342 30000
3840165-4 11-156101-06342 30000
Turbine Shaft 3822504-3 11P39036 30000
3840161-1 10-168522-04274 30000
3840160-8 10-168522-04274 30000
3610894-11 11-156101-06089 30000
3840165-4 11-156101-06089 30000
Turbine Shaft 3822504-3 11P39034 30000
3840161-1 10-168522-04813 30000
3840160-8 10-168522-04813 30000
3610894-11 11-156101-06294 30000
3840165-4 11-156101-06294 30000
Turbine Shaft 3822504-3 11P39035 30000
3840161-1 10-168522-04279 30000
3840160-8 10-168522-04279 30000
3610894-11 11-156101-06190 30000
3840165-4 11-156101-06190 30000
Turbine Shaft 3822504-3 11P39039 30000
3840161-1 11-168522-01942 30000
3840160-8 11-168522-01942 30000
3610894-11 11-156101-06038 30000
3840165-4 11-156101-06038 30000
Turbine Shaft 3822504-3 11P39412 30000
3840161-1 10-168522-04679 30000
3840160-8 10-168522-04679 30000
3610894-11 11-156101-04877 30000
3840165-4 11-156101-04877 30000
Turbine Shaft 3822504-3 11P39409 30000
3840161-1 11-168522-01946 30000
3840160-8 11-168522-01946 30000



(APU PN: 3800708-1, PN: 4500001B)

3610894-11 11-156101-11816 30000
3840165-4 11-156101-11816 30000
Turbine Shaft 3822504-3 11P39534 30000
3840302-1 10-156101-13821 30000
3840310-3 10-156101-13821 30000
3610894-11 11-156101-04928 30000
3840165-4 11-156101-04928 30000
Turbine Shaft 3822504-3 11P40940 30000
3610894-20 11-156101-06429 30000
3840310-3 11-156101-06429 30000
3610894-11 11-156101-08811 30000
3840165-4 11-156101-08811 30000
Turbine Shaft 3822504-3 11P42304 30000
3840302-1 11-156101-01572 30000
3840310-3 11-156101-01572 30000
3610894-11 11-156101-10080 30000
3840165-4 11-156101-10080 30000
Turbine Shaft 3822504-3 11P43338 30000
3610894-20 10-156101-12539 30000
3840310-3 10-156101-12539 30000
3610894-11 11-156101-06095 30000
3840165-4 11-156101-06095 30000
Turbine Shaft 3822504-3 12P46906 30000
3610894-20 11-156101-07316 30000
3840310-3 11-156101-07316 30000
3610894-11 11-156101-11338 30000
3840165-4 11-156101-11338 30000
Turbine Shaft 3822504-3 12P47816 30000
3610894-20 11-156101-05344 30000
3840310-3 11-156101-05344 30000
3610894-11 11-156101-10105 30000
3840165-4 11-156101-10105 30000
Turbine Shaft 3822504-3 12P48167 30000
3610894-20 11-156101-08099 30000
3840310-3 11-156101-08099 30000
3610894-11 11-156101-10796 30000
3840165-4 11-156101-10796 30000
Turbine Shaft 3822504-3 12P48200 30000
3610894-20 11-156101-08037 30000
3840310-3 11-156101-08037 30000
3610894-11 11-156101-11564 30000
3840165-4 11-156101-11564 30000
Turbine Shaft 3822504-3 12P48163 30000
3610894-20 11-156101-02420 30000
3840310-3 11-156101-02420 30000
Second Stage Turbine Rotor 3610894-11 11-156101-11358 30000



(APU PN: 3800708-1, PN: 4500001B)

3840165-4 11-156101-11358 30000
Turbine Shaft 3822504-3 12P48165 30000
3610894-20 10-156101-12360 30000
3840310-3 10-156101-12360 30000
3610894-11 11-156101-13832 30000
3840165-4 11-156101-13832 30000
Turbine Shaft 3822504-3 12P48544 30000
3610894-20 11-156101-06963 30000
3840310-3 11-156101-06963 30000
3610894-11 11-156101-09677 30000
3840165-4 11-156101-09677 30000
Turbine Shaft 3822504-3 12P48844 30000
3610894-20 12-156101-00310 30000
3840310-3 12-156101-00310 30000
3610894-11 11-156101-11327 30000
3840165-4 11-156101-11327 30000
Turbine Shaft 3822504-3 12P48850 30000
3610894-20 11-156101-06693 30000
3840310-3 11-156101-06693 30000
3610894-11 12-156101-01380 30000
3840165-4 12-156101-01380 30000
Turbine Shaft 3822504-3 12P49117 30000
3610894-20 12-156101-00694 30000
3840310-3 12-156101-00694 30000
3610894-11 10-156101-04260 30000
3840165-4 10-156101-04260 30000
Turbine Shaft 3822504-3 12P49754 30000
3610894-20 12-156101-00193 30000
3840310-3 12-156101-00193 30000
3610894-11 12-156101-01265 30000
3840165-4 12-156101-01265 30000
Turbine Shaft 3822504-3 12P49757 30000
3610894-20 11-156101-06966 30000
3840310-3 11-156101-06966 30000
3610894-11 12-156101-01175 30000
3840165-4 12-156101-01175 30000
Turbine Shaft 3822504-3 12P50430 30000
3610894-20 11-156101-13581 30000
3840310-3 11-156101-13581 30000
3610894-11 12-156101-00338 30000
3840165-4 12-156101-00338 30000
Turbine Shaft 3822504-3 12P50443 30000
3610894-20 11-156101-08023 30000
3840310-3 11-156101-08023 30000
3610894-11 12-156101-02248 30000
3840165-4 12-156101-02248 30000



(APU PN: 3800708-1, PN: 4500001B)

Turbine Shaft 3822504-3 12P51053 30000
3610894-20 11-156101-07549 30000
3840310-3 11-156101-07549 30000
3610894-11 12-156101-12230 30000
3840165-4 12-156101-12230 30000
Turbine Shaft 3822504-3 12P51715 30000
3610894-20 11-156101-13473 30000
3840310-3 11-156101-13473 30000
3610894-11 12-156101-03835 30000
3840165-4 12-156101-03835 30000
Turbine Shaft 3822504-3 12P52094 30000
3610894-20 11-156101-08702 30000
3840310-3 11-156101-08702 30000
3610894-11 12-156101-01187 30000
3840165-4 12-156101-01187 30000
Turbine Shaft 3822504-3 12P52488 30000
3610894-20 11-156101-08701 30000
3840310-3 11-156101-08701 30000
3610894-11 12-156101-04868 30000
3840165-4 12-156101-04868 30000
Turbine Shaft 3822504-3 12P52780 30000
3610894-20 11-156101-08733 30000
3840310-3 11-156101-08733 30000
3610894-11 12-156101-05914 30000
3840165-4 12-156101-05914 30000
Turbine Shaft 3822504-3 12P52776 30000
3610894-20 11-156101-04273 30000
3840310-3 11-156101-04273 30000
3610894-11 12-156101-05055 30000
3840165-4 12-156101-05055 30000
Turbine Shaft 3822504-3 12P52972 30000
3610894-20 11-156101-08735 30000
3840310-3 11-156101-08735 30000
3610894-11 12-156101-05497 30000
3840165-4 12-156101-05497 30000
Turbine Shaft 3822504-3 12P53471 30000
3610894-20 12-156101-05775 30000
3840310-3 12-156101-05775 30000
3610894-11 12-156101-01906 30000
3840165-4 12-156101-01906 30000
Turbine Shaft 3822504-3 12P53625 30000
3610894-20 11-156101-07325 30000
3840310-3 11-156101-07325 30000
3610894-11 12-156101-08122 30000
3840165-4 12-156101-08122 30000



(APU PN: 3800708-1, PN: 4500001B)

Turbine Shaft 3822504-3 12P54015 30000
3610894-20 12-156101-06086 30000
3840310-3 12-156101-06086 30000
3610894-11 12-156101-07331 30000
3840165-4 12-156101-07331 30000
Turbine Shaft 3822504-3 13P54911 30000
3610894-20 12-156101-09174 30000
3840310-3 12-156101-09174 30000
3610894-11 12-156101-07603 30000
3840165-4 12-156101-07603 30000
Turbine Shaft 3822504-3 13P55600 30000
3610894-20 11-156101-03793 30000
3840310-3 11-156101-03793 30000
3610894-11 12-156101-09517 30000
3840165-4 12-156101-09517 30000
Turbine Shaft 3822504-3 13P55537 30000
3610894-20 12-156101-11164 30000
3840310-3 12-156101-11164 30000
3610894-11 12-156101-09190 30000
3840165-4 12-156101-09190 30000
Turbine Shaft 3822504-3 13P55878 30000


A321 LANDING GEAR LIFE LIMITED PARTS
( IAW ALS Part 1 Rev: 02 Issue: MAY 13/11 & ALS Part 4 Rev: 01 Issue: JUN 15/12)

ISSUE: SEP 2013

SECSION 3 - A321 LDG LLP PAGE: 1

A321 LDG LLP SUB-PART 1-2
(IN CASE OF INCONSISTENCY BETWEEN THIS TABLE AND THE ALS PART 1, THE ALS PART 1 IS THE REFERENCE.)

Explanation notes are located under the assembly title.
LIFE
LIMITS
LIFE LIMITS
APPLICABILITY
IT Nomenclature Part Number LDG A321-200
ATA 32-11-00 MAIN LANDING GEAR (FIG. 01 to 05) X
BASIC SIDE STAY (FIG. 01 & 03) X

(6) This limit applies to parts fitted to A321-200 WV001, WV002, WV003, WV010 and WV011.

(8) This limit applies to parts fitted to A321-200 NOT identified in note (6) above.
1 Lower side stay 201525301 51400 X (6)
2 Lower side stay 201525301 60000 X (8)
3 Upper side stay 201525300 51400 X (6)
4 Upper side stay 201525300 60000 X (8)

(IN CASE OF INCONSISTENCY BETWEEN THIS TABLE AND THE ALS PART 1, THE ALS PART 1 IS THE REFERENCE.)
Explanation notes are located under the assembly title.
DEMONSTRATE
D FATIGUE
LIVES
DEMONSTRATED
FATIGUE LIVES
APPLICABILITY
IT Nomenclature Part Number LDG A321-200
ATA 32-11-00 MAIN LANDING GEAR (FIG. 01 to 05 & 08) X
(1) xx at the end of the PNR stands for any number between 00 and 99, including unused digits.
1 Rear pintle pin (1) D32156005000xx 60000 X
5 Rear pintle pin nut SLN40851 60000 X
6 Rear pintle pin nut SLN41194 60000 X
MAIN STRUT AND DRESSINGS (FIG. 01, 03 & 04) X

(1) This PNR is submitted to an inspection. Refer to CN 2000-428-153(B) latest approved revision.

(2) Bolt PNR NAS6610D43 must be replaced by a new one every time it is removed from the main
fitting.
7 Aft pintle spherical bearing 201042415 60000 X



ISSUE: SEP 2013


20 Forward pintle pin 201522600 60000 X
21 Forward pintle pin lock bolt 201383628 (1) 60000 X
22 Forward pintle pin stub bolt 201587602 60000 X
26 Cardan bracket (LH) 201383304 60000 X
27 Cardan bracket (RH) 201383305 60000 X
28 Cardan bracket bolt NAS6610D43 (2) X
29 Main fitting (LH) 201522300 60000 X
30 Main fitting (LH) 201522351 60000 X
31 Main fitting (RH) 201522301 60000 X
32 Main fitting (RH) 201522352 60000 X
33 Upper torque link pin 201383604 60000 X
34 Upper torque link 201522302 60000 X
35 Upper torque link 201587303 60000 X
36 Torque link apex pin 201383606 60000 X
37 Torque link apex pin nut 201383615 60000 X
38 Torque link apex pin nut 201587612 60000 X
39 Lower torque link 201522303 60000 X
40 Lower torque link 201587304 60000 X
41 Lower torque link pin 201383605 60000 X
42 SHOCK ABSORBER SUBASSEMBLY (FIG. 01 & 02) X

(2) Upper bearing locking screw PNR NAS1802-3-8 must be replaced by a new one every time it is
removed from the upper bearing. PNR applicable to Aircraft landing gear POST MOD 24218.
43 Sliding tube 201522350 60000 X
44 Sliding tube 201522353 60000 X
45 Upper diaphragm tube 201522651 60000 X
46 Upper bearing locking screw NAS1802-3-8 (2) X
COMPLETE SIDE STAY (FIG. 01 & 03) X
BASIC SIDE STAY (FIG. 01 & 03) X
47 Lower cardan nut 201525612 60000 X



ISSUE: SEP 2013


48 Lower cardan nut 201661611 60000 X
49 Lower cardan 201525302 60000 X
50 Side stay lower cardan pin 201525620 60000 X
53 Lower side stay 201661301 60000 X
54 Side stay pivot pin 201525605 60000 X
55 Side stay pivot pin 201661601 60000 X
56 Upper side stay 201661300 60000 X
57 Side stay upper cardan pin 201525618 60000 X
58 Upper cardan 201525607 60000 X
59 Upper cardan nut 201525619 60000 X
60 Upper cardan nut 201661610 60000 X
61 Upper pin (Springs) 201057611 60000 X
62 Upper pin (Springs) 201661607 60000 X
63 Lower pin (Springs) 201057625 60000 X
64 Lower pin (Springs) 201661606 60000 X
65 Triangulation link pin 201057624 60000 X
66 Triangulation link pin 201661609 60000 X
67 Triangulation link 201057306 60000 X
68 Triangulation link 201661307 60000 X
69 Banana link 201057304 60000 X
70 Banana link 201661304 60000 X
71 Banana link 201661306 60000 X
72 Cuff pin 201057623 60000 X
73 Cuff pin 201661612 60000 X
74 Cuff 201057634 60000 X
75 Cuff 201163309 60000 X
76 Cuff 201661302 60000 X
77 Cuff 201661305 60000 X
78 Cuff 201661602 60000 X
79 Cuff 201661613 60000 X
80 Pin (Lock link/Banana link) 201057644 60000 X
81 Pin (Lock link/Banana link) 201661605 60000 X
82 Lock link lower pin 201057627 60000 X
LOCK LINK (FIG. 03) X
83 Lower lock link 201403300 60000 X
84 Lock link center pin 201058608 60000 X
85 Upper lock link 201531300 60000 X
86 Upper lock link 201531600 60000 X
87 Lock link upper pin 201058611 60000 X



ISSUE: SEP 2013


88 Lock stay cardan 201058304 60000 X
89 Lock stay cardan 201058306 60000 X
90 Lock stay cardan pin 201056909 60000 X
ATA 32-21-00 NOSE LANDING GEAR (FIG. 06) X
NOSE LANDING GEAR LEG (FIG. 06) X
LEG STRUCTURE (FIG. 06) X
91 Hinge pin (Barrel/Structure) D65588 60000 X
92 Hinge pin (Barrel/Structure) D65588-1 60000 X
93 Barrel D65233 60000 X
94 Barrel D67583 60000 X
95 Pin (Retraction actuator/ Lock link/Barrel) D65589 60000 X
96 Pin (Retraction actuator/ Lock link/Barrel) D65589-1 60000 X
97 Pin (Forestay/Barrel) D65599 60000 X
98 Pin (Forestay/Barrel) D65599-1 60000 X
SHOCK ABSORBER (FIG. 06) X

(3) One-piece sliding tube (integrating the wheel axle).

(4) Sliding tube with a separate wheel axle.
99 Cylinder D65519 60000 X
100 Sliding tube D65236 (3) 60000 X
101 Sliding tube D66679 (4) 60000 X
102 Wheel axle D66680 60000 X
FORESTAY ASSEMBLY (FIG. 06) X
FORESTAY (FIG. 06) X
103 Forestay lower link D65238 60000 X
104 Forestay lower link D67802 60000 X
105 Pin (Lower link/U-joint) D65773 60000 X
106 Lock link lower pin D65631 60000 X
107 Lock link lower pin D65631-1 60000 X
108 Lock link lower pin D67928 60000 X
109 Cross pin D65628 60000 X
110 Cross pin D65628-1 60000 X
111 Cross pin D67932 60000 X
112 Universal joint D59638 60000 X
113 Pin (Upper panel/U-joint) D65887 60000 X
114 Forestay upper panel D59416 60000 X
115 Forestay upper panel D65237 60000 X
116 Pin (Upper panel/Structure) D65616 60000 X
LOCK LINK (FIG. 06) X
117 Lock link lower link D59635 60000 X
118 Lock link center pin D60054 60000 X
119 Lock link upper link D59636-1 60000 X



ISSUE: SEP 2013


ATA 57-00-00 WING STRUCTURE (FIG. 07 & 08) X

(1) This item is not transferable from an aircraft to another: Traceability at aircraft level is authorized.

(2) xx at the end of the PNR stands for any number between 00 and 99, including unused digits.
120 Gear support rib (LH) (1) (2) D57255510000xx 48000 X
125 Gear support rib (RH) (1) (2) D57255510001xx 48000 X
130 Forward pintle fitting (LH) (1) (2) D57259192002xx 48000 X
131 Forward pintle fitting (RH) (1) (2) D57259192003xx 48000 X
132 Sidestay fitting (LH) (1) (2) D57259172000xx 48000 X
136 Sidestay fitting (RH) (1) (2) D57259172001xx 48000 X
140 Retraction Jack fitting (LH) (1) (2) D57259162000xx 48000 X
141 Retraction Jack fitting (RH) (1) (2) D57259162001xx 48000 X

(IN CASE OF INCONSISTENCY BETWEEN THIS TABLE AND THE ALS PART 4, THE ALS PART 4 IS THE REFERENCE)
ATA 32-10-00 MAIN LANDING GEAR
RETRACTION ACTUATOR (FIG 04)
PART NUMBER
LIFE LIMITATIONS
(LDG)
LIFE LIMITS
APPLICABILITY
A321-200
Retraction actuator pin (main fitting side) 114193637 60000 X
Retraction actuator piston rod 114193601 60000 X
Retraction actuator piston rod 201590908 60000 X
Retaining ring (retraction actuator piston
rod)
114193606 (1) X
Retraction actuator piston head 114193603 60000 X
Retraction actuator piston head 201590909 60000 X
Retraction actuator piston head nut 114193604 60000 X
Retraction actuator piston head nut 201590910 60000 X
Retraction actuator gland 114193602 60000 X



ISSUE: SEP 2013


Retaining ring (retraction actuator gland) 114193643 (2) X
Retraction actuator cylinder 114193600 60000 X
Retraction actuator pin (rear spar side) 114193610 60000 X
Retraction actuator pin (rear spar side) 201590901 60000 X
(1) Retaining ring P/N 114094611 and P/N 114193606 must be replaced by a new one every time it is removed
from the
piston head.
(2) Retaining ring P/N 114193643 must be replaced by a new one every time it is removed from the gland.


A321 TIME CONTROLLED ITEMS LIST

(*) For new parts: Current task interval is applied.
For used parts: Current task interval or CRS (certificate release to service) part interval is applied, whichever comes first.

ISSUE: SEP 2013 SECSION 3 - A321 TIME CONTROLLED ITEMS LIST PAGE 1 OF 10

ITEM
MPD/AMS
REF.
DESIGNATION PART No CMM
SOURCE
REF.
SERVICE DESCRIPTION INTERVAL(*)
1 215141-01-1
OZONE FILTER (OZONE
CONVERTER)
20499003
20499004
20499005
20499006
44018003
44018004
21-11-04

21-11-15
MPD FUNCTIONAL CHECK
9000 FH
OR
60 MO
2 215200-01-1
PRIMARY HEAT
EXCHANGER
753A0000-03
753A0000-04
753B0000-02
753C0000-01
753C0000-02
21-52-11 MPD CLEANING
12000 FH
OR
80 MO
3 215200-01-1 MAIN HEAT EXCHANGER
754A0000-03
754B0000-02
754C0000-01
21-52-11 MPD CLEANING
12000 FH
OR
80 MO
4 212141-01-1
CARTRIDGE FILTER
(RECIRCULATION FILTER)
424B200-3
424B200-4
424B200-6
424B200-7
QA06423
QA06423-01
21-21-02

21-21-23
MPD DISCARD & REPLACE
5000 FH
OR
36 MO
5 213100-08-1 VALVE-SAFETY
9024-15704-2
9024-15704-03
21-31-40 MPD RESTORATION
50000 FH
OR
210 MO
6 215200-02-2 REHEATER
755A0000-04
755B0000-02
755C0000-01
21-52-08
MPD

CLEANING
12000 FH
OR
80 MO
7 215200-04-1 CONDENSER
756A0000-05
756A0000-06
21-52-10 MPD RESTORATION (LEAK TEST)
18000 FH
OR
120 MO





ITEM
MPD/AMS
REF.
SOURCE
REF.
8
237135-01-1
237135-02-1
313300-01-1
313300-03-1
UNDERWATER
ACOUSTIC
BEACON (ULD/ULB)
ELP362D
DK100
DK120
266E0305-00
266E0305-01
266E0305-02
23-70-44
31-31-36
23-70-04
VR (CMM)

BEACON CLEANING
AND/OR TESTING:

ULB BATTERY (AND ORING)
REPLACEMENT:
2 YEAR

6 YEAR
9 243851-01-1 BATTERY 2758 24-38-51 VR (MPD)

GENERAL OVERHAUL IAW CMM
01 YE
10 243851-02-1 BATTERY 2758 24-38-51 VR (MPD)
* CLEANING, CHARGE BATTERY, ADJUST
ELECTROLYTE LEVEL

** CLEANING, CAPACITY CHECK, ADJUST
ELECTROLYTE LEVEL

* 1000 FH

** 2000 FH OR 06 MO

11 212652-01-1 SKIN AIR INLET VALVE
VFT210B00
VFT210A2

REMOVE SKIN AIR INLET VALVE FOR
OVERHAUL
18000 FH
OR
120 MO
12 212653-02-1 SKIN AIR OUTLET VALVE VFT300B00

REMOVE SKIN AIR OUTLET VALVE FOR
OVERHAUL
18000 FH
OR
120 MO
13 256241-02-1 EVACUATION SLIDE/RAFT

D18309-XXX

25-65-17
VR (CMM)
DOT -SP 8162
DOT-SP 10945
* HYDROSTATIC TEST OF GAS CYLINDER
** DISCARD RESERVOIR
* 5 YEAR
** 15 YEAR
14 256241-03-1 EVACUATION SLIDE/RAFT
D30664-XXX
D30665-XXX
25-61-20
25-65-17
VR (CMM)
DOT-SP 8162
DOT-SP 10945

* EVERY 3 YEARS:
FOR EVACUATION SYSTEMS UP TO AND
INCLUDING 15 YEARS OF AGE OR IF
INFLATABLE, RESERVOIR, HOSE AND
APPLICABLE LIFE-LIMITED ITEMS ARE
REPLACED AT 15 YEARS FOR THE NEXT
15 YEARS:
* 03 YEAR

** 01 YEAR

*** 15 YEAR:





ITEM
MPD/AMS
REF.
SOURCE
REF.
CHECK/TEST INCL. HYDROSTATIC TEST

** EVERY YEAR:
FOR EVACUATION SYSTEMS AFTER 15
YEARS OF IN-SERVICE LIFE:

* EVERY 3 YEARS UP AND INCLUDING 15
YEARS :
PERFORM A SYSTEM CHECK OF
INFLATION SYSTEM

*** 15 YEARS: DISCARD RESERVOIR

15 VN256600-01 SURVIVAL KIT
60128-103
60128-101
60128-303

25-61-20 VR (CMM) VISUAL CHECK IAW CMM
THE FIRST OVERHAUL
CONFORM TO THE EXPIRE
DATE ON PLACARDS KIT
03 YEARS.: BEFORE 15
YEARS OF AGE, AFTER THE
FIRST OVERHAUL
01 YEAR.: AFTER 15 YEARS
OF AGE
16 256247-01-1
A321 DOOR 2 /3
EVACUATION SLIDE
SYSTEMS
62292-XXX
62293-XXX
25-66-10
25-66-11
VR (CMM)
* EVERY 3 YEARS
FOR EVACUATION SYSTEMS UP TO AND
INCLUDING 15 YEARS OF AGE
OR
IF INFLATABLE, RESERVOIR, HOSE AND
APPLICABLE LIFE-LIMITED ITEMS ARE
REPLACED AT 15 YEARS FOR THE NEXT
15 YEARS:

** EVERY YEAR
FOR EVACUATION SYSTEMS AFTER 15
YEARS OF IN-SERVICE LIFE:
* 03 YEAR

** 01 YEAR





ITEM
MPD/AMS
REF.
SOURCE
REF.

* EVERY 3 YEARS UP AND INCLUDING 15
YEARS:
INFLATION SYSTEM IAW CMM

AT EVERY SCHEDULED MAINTENANCE
CHECK:
PERFORM A HOSE INTEGRITY TEST

17 256249-01-1
A321 EVACUATION
SYSTEMS RESERVOIR AND
VALVE ASSEMBLY
61639-XXX 25-65-21
VR (CMM)
DOT-SP 8162
DOT-SP 10945
DOT-SP 11194

* EVERY 3 YEARS
PERFORM INFLATION SYSTEM

* * EVERY 5 YEARS UP AND INCLUDING 15
YEARS:
PERFORM HYDROSTATIC TEST AND
INSPECTION IAW CMM.

*** DISCARD RESERVOIR

* 3 YEAR

**5 YEAR

*** 15 YEAR
18 256600-01-1 25 PERSON LIFE RAFT 65025-XXX 25-62-23 VR (CMM)

* 3 YEARS:
INFLATION SYSTEM AND
EVERY 6 YEARS UP AND INCLUDING 12
YEARS AND

** AFTER 15 YEARS AND THEN EACH
YEAR THEREAFTER:
PERFORM A FUNCTIONAL TEST, AN
INFLATABLE INTEGRITY VERIFICATION
TEST INCLUDING OVERPRESSURE TEST
AND LEAK TEST, HOSE INTEGRITY
CHECK, LIGHT SYSTEM TEST (IF
* 03 YEAR

** 01 YEAR





ITEM
MPD/AMS
REF.
SOURCE
REF.
APPLICABLE). DISSEMBLE SYSTEM TO
EXTEND NECESSARY TO COMPLY WITH
CHECK SECTION.

19 256532-01-1
PORTABLE EMERGENCY
LOCATOR TRANSMITTER
(ELT)
1151324-1 25-60-10 VR (CMM)
EVERY 5 YEARS:
PERFORM BATTERY TEST / INSPECTION
IAW CMM
05 YEAR
S1823502-03
S1823502-02
25-63-05 VR (CMM)
EVERY 6 YEARS:
REPLACE BATTERY
06 YEAR
20 256535-02-1 ELT IN REAR FUSELAGE
95N6088 25-60-04 VR (CMM)
REPLACE BATTERY 03 YEAR
DISCARD O-RING 08 YEAR
S1821502-02 25-63-05 VR (CMM) REPLACE BATTERY 06 YEAR
21 256551-01-1 ELECTRONIC MEGAPHONE A12SA 25-65-04 VR CMM) REPLACE BATTERIES 01 YEAR
22 256652-01-1 LIFE VESTS
0P0723-111WC
P0723-103WC
P0723E105P
P0723E105PW
P0640-103
25-60-07
25-60-07
25-60-12
25-60-12
25-60-15
VR (CMM)
EVERY 60 MONTHS:
AFTER ENTRY INTO SERVICE, BUT NOT
LATER THAN 63 MONTH AFTER DATE OF
MANUFACTURE
PERFORM MAINTENANCE INSPECTION
IAW CMM
05 YEAR





ITEM
MPD/AMS
REF.
SOURCE
REF.
23
262141-02-1
262141-02-1A
ENGINE FIRE
EXTINGUISHER BOTTLES
34100005-1
472088-1
26-20-05
26-20-79
VR (CMM)
SIL 26-0237D
SIL96-2
HYDROSTATIC TEST:

WEIGHT CHECK:
10 YEAR

05 YEAR
86181007 26-21-41 NR/VR (CMM)
* EVERY 2 YEARS:
PERFORM A TEST INCLUDING WEIGHT
CHECK

** EVERY 5 YEARS:
PERFORM AN OVERHAUL
INCLUDING HYDROSTATIC TEST OF
EXTINGUISHER BOTTLE DOT 4A-700
* 02 YEAR

** 05 YEAR
24 262142-01-1
ENGINE FIRE EXTIR
BOTTLE CARTRIDGES
30903886
446158
26-20-05
26-21-34
VR (CMM) DISCARD CARTRIDGE 10 YEAR
86182008 26-21-41 VR (CMM)

DISCARD CARTRIDGE
LIFE LIMITS OF CARTRIDGE:
7 YEARS MAXIMUM LIFE
5 YEARS OPERATING LIFE
05 YEAR
25
262241-01-1
262241-01-1A
APU FIRE EXTINGUISHER
BOTTLE
33600005-3 26-20-03
NR/VR (CMM)
SIL 26-0237D
HYDROSTATIC TEST:

WEIGHT CHECK:
10 YEAR

05 YEAR
26 262242-01-1
APU FIRE EXTINGUISHER
BOTTLE CARTRIDGES
30903827 26-20-05 VR (CMM) DISCARD CARTRIDGE 10 YEAR
27 262541-02-1
LAVATORY FIRE
EXTINGUISHER BOTTLE
BA24320A1
BA21758
26-25-36
26-25-12
MPD WEIGHT CHECK 72 MO





ITEM
MPD/AMS
REF.
SOURCE
REF.
28 262441-02-1
PORTABLE FIRE
EXTINGUISHER
74-20
0074-20
26-24-05 VR (CMM)
* PERIODICAL CHECK EVERY 2 YEARS
(VISUAL INSPECTION/WEIGHT
CONTROL/SCALEREF: CMM 26-24-05)
** AFTER EXPIRATION OF 5 YEARS,
INCASE OF FILLING/REFILLING, THE
CONTAINER OF FIRE EXT HAS TO BE
INSPECTED INSIDE. SHOULD DEFECTS BE
DETECTED, THE FIRE EXT HAS TO BE
HYDROSTATICALLY PRESSURE TEST
*** HYDROSTATIC TEST
**** DISCARD EXTINGUISHER
* 2 YEAR

** 5 YEAR

*** 10 YEAR
**** 20 YEAR
29
262341-02-2
CARGO COMPARTMENT
FIRE EXTINGUISHER
BOTTLE
34600049-1
26-23-42
VR (CMM)
SIL 26-0237D
HYDROSTATIC TEST & CHECK OF
PRESSURE SWITCH SETTING
10 YE
262341-01-2 26-23-42 MPD WEIGHT CHECK
22500 FH
OR 72 MO
30 262300-04-3
CARGO COMPARTMENT
FIRE EXTINGUISHER
BOTTLE CARTRIDGES
30903898 26-23-42 VR (CMM) DISCARD CARTRIDGE 10 YEAR
31 261600-05-1
CARGO COMPARTMENT
SMOKE DETECTOR
PPA1102-00
PPA1101-00
PPC1100-00
PPA1103-00
26-16-16
26-16-16
26-18-18
MPD CLEANING IN THE WORKSHOP
18000 FH
OR
120 MO
32 261700-04-1
LAVATORY SMOKE
DETECTOR
PPA1202-00
PPC1200-00
26-16-16
26-18-18
MPD CLEANING IN THE WORKSHOP
12000 FH
OR
80 MONTH





ITEM
MPD/AMS
REF.
SOURCE
REF.
33 275117-01-1
FLAP/SLAT COMMAND
SENSOR UNIT
780A0000-01
780A0000-02
780B0000-01
27-09-02 MPD
CHECK OF FRICTION BRAKE IN
WORKSHOP
40 MONTH
34 292000-11-1 RAT AND ACTUATOR
759998
761618
762308
762308A
762308B
766352
766352A
766352B
764711A
764711B
764711C
29-21-03
29-21-42
29-21-44
ALS PART 4
(ASM)
OVERHAUL AND REPLACE WITH NEW OR
REPAIRED UNITS
20 YEAR
35 321111-01-2 MAIN LANDING GEAR ALL
32-12-13
32-12-21
32-12-22
MPD OVERHAUL
120 MO
OR
20000 FC
36 322111-01-1 NOSE LANDING GEAR ALL
32-27-19
32-27-22
32-27-24
32-27-40
MPD OVERHAUL
120 MO
OR
20000 FC
37 351141-01-1 CREW OXYGEN CYLINDER 89794077 35-21-93
VR (CMM)
SIL-35-103
DOT-SP 8162
HYDROSTATIC TEST 05 YEAR
DISCARD CYLINDER 15 YEAR
38 351241-02-1 CREW OXYGEN MASK
MF10-05-11
MF20-534
35-13-61
35-13-60
MPD FUNCTIONAL CHECK IN WORKSHOP 06 YEAR





ITEM
MPD/AMS
REF.
SOURCE
REF.
39 352142-01-1 OXYGEN GENERATORS
117042-02
117042-03
117042-04
35-21-73 MPD DISCARD OXYGEN GENERATORS 180 MO
40 353000-02-1
PORTABLE OXYGEN
CYLINDER ASSEMBLIES
9700C1AF23AN
9800-2D1AF23AM
35-31-55 VR (CMM)
EVERY 5 YEARS:
PERFORM AN OVERHAUL
INCLUDING HYDROSTATIC TEST
05 YEAR
3552AAADAACXCD 35-35-52 VR (CMM)
HYDROSTATIC TEST:

DISCARD:
05 YEAR

15 YEAR
41 353000-06-1
PBE-PROTECTIVE
BREATHING EQUIPMENT
(SMOCKE HOODS)
E28180
E28180-10
E28180-20-001
35-10-25 VR (CMM) DISCARD: 10 YER
42 470000-02-1
AIR SEPARATION MODULE
(ASM)
2060017-101
2060017-102
47-10-43
MPD
FAL
REPLACEMENT 27000 FH
43 383155-01-1
VACUUM TOILET RINSE
VALVE

15800-348 REV.A
15800-348 REV.B
15800-348 REV.C

MPD
REMOVE, CLEAN AND INSPECT TOILET
RINSE VALVES FROM ALL TOILETS
48 MONTH
44 215800-01-1
AIR COOLING AND
TEMPERATURE CONTROL
MPD
REMOVE CSAS OZONE CONVERTER FOR
RESTORATION
6000 FH
OR
48 MONTH
45 215800-02-1
AIR COOLING AND
TEMPERATURE CONTROL
MPD
REMOVE CSAS HEAT EXCANGER FOR
CLEANING
12000 FH
OR
80 MONTH
46 212653-01-1 SKIN AIR OUTLET VALVE VFT300A1

REMOVE SKIN AIR OUTLET VALVE FOR
OVERHAUL
12000 FH
OR
80 MO





ITEM
MPD/AMS
REF.
SOURCE
REF.
34 262441-02-1-A
PORTABLE FIRE
EXTINGUISHER
74-20
0074-20
26-24-05 VR (CMM)
PERIODICAL CHECK EVERY 2 YEARS
(VISUAL INSPECTION/WEIGHT
CONTROL/SCALEREF: CMM 26-24-05)

2 YEAR

A320 AIRCRAFT MAINTENANCE schedule

SECTION 4

SCHEDULED AIRCRAFT MAINTENANCE



4-LEP R 1 AUG 2012
4-TOC R 1 AUG 2012
4-GENERAL R 1 JUL 2013
4- ALI SUB-SECTION R JUL 2013
4- CMR SUB-SECTION R JUL 2013
4- SYS SUB-SECTION R JUL 2013
4- FAL SUB- SECTION R JUL 2013
4- ASM SUB-SECTION R JUL 2013
4- STR SUB-SECTION R JUL 2013
4- ZNL SUB-SECTION R JUL 2013
4- ECO SUB-SECTION R JUL 2013

ISSUE: SEP 2013 SECTION 4 - LEP PAGE 1
s


SECTION 4

MAINTENANCE SCHEDULE

TABLE OF CONTENTS

SUBJECT SECTION
GENERAL INTRODUCTION 4
AIRWORTHINESS LIMITATION ITEM 4
CERTIFICATION MAINTENANCE REQUIREMENTS 4
SYSTEM 4

FUEL AIRWORTHINESS LIMITATIONS

4
AGEING SYTEMS MAINTENANCE 4
STRUCTURE 4
ZONAL 4
ECO 4

ISSUE: SEP 2013 SECTION: 4-TOC

PAGE: 1

ISSUE SEP 2013 SECTION 4 PAGE: 1
SECTION 4
1. GENERAL
This section includes all the scheduled tasks related to
General Visual Inspection (GVI) require-ments for each aircraft zone to check
system and Power plant installations and structure for security and general
condition (Zonal tasks).
Aircraft Systems and Components.
Auxiliary Power Unit (APU)
Power Plants.
Detailed and Special Detailed Inspection tasks and tasks for re-application of
temporary protections applicable to the aircraft structure (Structure tasks)
2. CONTENTS
This Section includes 6 sub-sections:
Airworthiness Limitation Items (ALI)
Certification Maintenance Requirements (CMR)
Systems and Components (SYS)
Fuel Airworthiness Limitations (FAL )
Ageing Systems Maintenance (ASM)
Structure Program (STR)
Zonal Program (ZNL)
Fuel saving (ECO)
3. REMARK
This Aircraft Maintenance Schedule is printed out from AMASIS.

A321 Aircraft Maintenance Schedule

Date : SEP 2013

LIST OF EFFECTIVE PAGES - ALI Page : 1

LEP R 1 SEP 2013

CHAPTER : 52 DOORS
Task Number Zone Task Title
Task
code
Threshold
Interval
Ctrl References Eff
ALI 521103-01-1
AMM 521100/6
AMT 521100-210-002
T 14 800 CY
I 14 800 CY
ALL 521103-01-1 FWD PAX/CREW DOOR SKIN EXTERNAL SURFACE 831 GVI
841
Y
GENERAL VISUAL INSPECTION OF FORWARD PASSENGER/CREW
DOOR SKIN, EXTERNAL SURFACE, LH/RH
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
ALI 521303-01-1
AMM 521300/6
AMT 521300-210-002
T 14 800 CY
I 14 800 CY
ALL 521303-01-1 AFT PAX/CREW DOOR SKIN EXTERNAL SURFACE 832 GVI
842
Y
GENERAL VISUAL INSPECTION OF AFT PASSENGER/CREW DOOR
SKIN, EXTERNAL SURFACE, LH/RH
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
ALI 522201-01-1
AMM 522211/6
AMT 522211-200-005
T 4 500 CY
I 4 500 CY
ALL 522201-01-1 FORWARD EMERGENCY EXITS EXTERNAL SURFACE 833 GVI
843
N
GENERAL VISUAL INSPECTION OF FORWARD EMERGENCY EXITS,
EXTERNAL SURFACE, LH/RH
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
Date ATA 52 Date 22/01/2014
Amendment No Issue No Page ALI - 52 [1 / 6] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 522203-01-1
AMM 522211/6
AMT 522211-200-006
T 24 000 CY
I 4 500 CY
ALL 522203-01-1 FWD EMERGENCY EXIT DOORS STOP ASSEMBLIES 833 GVI
843
N
GENERAL VISUAL INSPECTION OF DOOR STOP ASSEMBLIES AND
LOCKING HOOK ON FORWARD EMERGENCY EXIT DOORS, LH/RH
Access panels :
833 843
0.04 Total access time : Hrs
Skills :
AF 1 0.40 MHrs
ALI 522204-01-1
AMM 522211/6
AMT 522211-200-007
T 4 500 CY
I 4 500 CY
ALL 522204-01-1 AFT EMERGENCY EXITS EXTERNAL 834 GVI
844
N
AFT EMERGENCY EXITS EXTERNAL
GENERAL VISUAL INSPECTION OF AFT EMERGENCY EXITS,
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
ALI 522206-01-1
AMM 522211/6
AMT 522211-200-008
T 24 000 CY
I 4 500 CY
ALL 522206-01-1 AFT EMERGENCY EXITS INTERNAL 834 GVI
844
N
GENERAL VISUAL INSPECTION OF DOOR STOP ASSEMBLIES AND
LOCKING HOOK ON AFT EMERGENCY EXIT DOORS, LH/RH
Access panels :
834 844
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 523101-01-1
AMM 523111/6
AMT 523111-200-011
T 25 000 FH
T 12 500 CY
I 25 000 FH
I 12 500 CY
ALL 523101-01-1 FWD CARGO COMPARTMENT DOOR SKIN 825 GVI N
GENERAL VISUAL INSPECTION OF FORWARD CARGO
COMPARTMENT DOOR SKIN, EXTERNAL SURFACE
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
ALI 523108-01-1
AMM 523111/6
AMT 523111-200-004
MRB 523108-01-1
T 102 400 FH
T 51 200 CY
T 12 YE
I 29 000 FH
I 14 500 CY
I 12 YE
ALL 523108-01-1 FWD CARGO DOOR FITTINGS EXTERNAL AREA 825 DI Y
DETAILED INSPECTION OF FORWARD CARGO COMPARTMENT
DOOR, HINGE FITTINGS AND ATTACHMENT AREA, EXTERNAL
NOTE 1: APPLICATION OF TPS IS LIMITED ON THE INNER SIDE
OF HINGE FITTINGS
TPS : APPLICATION OF TPS TYPE 1 GRADE 2 OR GRADE 3
PREP. : DOOR OPENED
NOTE 2: 100% LIMIT = 12 YE OR 36500 FC
NOTE 3: SAMPLING 20%
NOTE 4: CPCP
NOTE 5: RII TASK
Access panels :
825
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 523109-02-1
AMM 523111/6
AMT 523111-200-013
T 20 700 FH
T 10 300 CY
I 20 700 FH
I 10 300 CY
ALL 523109-02-1 FWD CARGO DOOR LOCKING HOOKS 825 GVI Y
GENERAL VISUAL INSPECTION OF LOCKING HOOKS AND FORK
FITTINGS OF FORWARD CARGO COMPARTMENT DOOR AT ALL
FRAMES, BETWEEN LONGERON 4 AND LONGERON 5 (6 PLACES)
Access panels :
825
Skills :
AF 1 0.20 MHrs
ALI 523111-01-1
AMM 523211/6
AMT 523211-200-011
T 25 000 FH
T 12 500 CY
I 25 000 FH
I 12 500 CY
ALL 523111-01-1 AFT CARGO DOOR SKIN 826 GVI Y
GENERAL VISUAL INSPECTION OF AFT CARGO COMPARTMENT
DOOR SKIN, EXTERNAL SURFACE
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 523118-01-2
AMM 523211/6
AMT 523211-200-005
MRB 523118-01-2
T 102 400 FH
T 51 200 CY
T 12 YE
I 29 000 FH
I 14 500 CY
I 12 YE
ALL 523118-01-2 AFT CARGO DOOR FITTINGS EXTERNAL AREA 826 DI Y
DETAILED INSPECTION OF AFT CARGO COMPARTMENT DOOR,
HINGE FITTINGS AND ATTACHMENT AREA, EXTERNAL
NOTE 1: APPLICATION OF TPS IS LIMITED TO THE INNER SIDE
OF HINGE FITTINGS
NOTE 4: CPCP
NOTE 5: RII TASK
Access panels :
826
Skills :
AF 1 0.30 MHrs
ALI 523119-02-2
AMM 523211/6
AMT 523211-200-012
T 20 700 FH
T 10 300 CY
I 20 700 FH
I 10 300 CY
ALL 523119-02-2 AFT CARGO DOOR LOCKING HOOKS 826 GVI Y
GENERAL VISUAL INSPECTION OF LOCKING HOOKS AND FORK
FITTINGS OF AFT CARGO COMPARTMENT DOOR AT ALL FRAMES,
BETWEEN LONGERON 4 AND LONGERON 5 (6 PLACES)
Access panels :
826
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 523301-01-1
AMM 523311/6
AMT 523311-200-004
T 7 500 CY
I 7 500 CY
ALL 523301-01-1 BULK CARGO DOOR SKIN EXTERNAL 827 GVI Y
BULK CARGO DOOR SKIN EXTERNAL
GENERAL VISUAL INSPECTION OF BULK CARGO COMPARTMENT
DOOR SKIN, EXTERNAL SURFACE
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
ALI 528107-01-1
AMT 528100-210-801
T 49 100 CY
I 2 800 CY
ALL 528107-01-1 MAIN GEAR DOORS 730 GVI
740
N
GENERAL VISUAL INSPECTION OF MLG DOOR FWD
FITTING JOINT TO HINGE FITTING, LH/RH
NOTE: FOR PRE 24428 OR PRE 24903 AIRCRAFT
RETROFITTED, THRESHOLD IS TO BE COUNTED FROM
SB 52-1058 OR SB 52-1073 EMBODIMENT
Access panels :
734 744
Skills :
AF 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 53 FUSELAGE
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531101-01-1
AMT 531100-220-802
T 36 500 CY
I 3 800 CY
ALL 531101-01-1 FWD PAX/CREW DOOR 220 DI N
DETAILED INSPECTION OF FWD PASSENGER/CREW DOOR
CUTOUT, INTERCOSTALS FITTINGS N7 BETWEEN FR15-16
AND FR20-21, LH/RH
PREPARATION:
CEILING PANELS REMOVED;
INSULATION REMOVED;
LINING REMOVED;
Access panels :
831 841
Skills :
AF 1 0.60 MHrs
ALI 531102-01-1
AMM 531100/6
AMT 531100-210-001
MRB 531102-01-1
T 22 000 CY
T 6 YE
I 13 600 CY
I 6 YE
ALL 531102-01-1 FWD PAX / CREW DOOR 220 DI Y
DETAILED INSPECTION OF FORWARD PASSENGER/CREW DOOR
FRAME, UPPER CORNERS, EXTERNAL SURFACE, LH/RH
NOTE : CPCP
Access panels :
831 841
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531110-01-2
AMT 531100-220-803
MRB 531110-01-2
NTM 53-11-10
T 60 000 FH
T 30 000 CY
I 28 900 FH
I 14 400 CY
ALL 531110-01-2 NOSE FORWARD FUSELAGE 125 SDI
126
N
SPECIAL DETAILED INSPECTION (ROTO) OF CROSSBEAM
SPLICING, FR16 AND FR20, LH/RH.
PREP. : AIR CONDITIONING
DUCTS REMOVED;
BOLTS REMOVED;
INSULATION REMOVED;
NOTE 1: 100% THRESHOLD = 38900 FC OR 77900 FH
NOTE 2: SAMPLING 20%.
Access panels :
812 824
Skills :
NDT 1 0.26 MHrs
ALI 531111-01-1
AMM 531100/6
AMT 531100-210-809
T 1 500 CY
I 1 500 CY
ALL 531111-01-1 AVIONICS DOORS SURROUND 100 GVI Y
GENERAL VISUAL INSPECTION OF AVIONICS COMPARTMENT
DOORS, SURROUND CORNERS, EXTERNAL SURFACE (4 DOORS)
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
ALI 531112-01-1
AMM 531100/6
AMT 531100-210-005
T 32 600 FH
T 16 300 CY
I 32 600 FH
I 16 300 CY
ALL 531112-01-1 FUSELAGE LOWER PANEL EXTERNAL SURFACE 100 DI Y
DETAILED INSPECTION OF FUSELAGE LOWER PANEL AT NLG
BAY AFT CORNERS, EXTERNAL SURFACE, LH/RH
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531113-01-1
AMT 531100-210-818
T 41 400 CY
I 7 400 CY
ALL 531113-01-1 FUSELAGE SKIN ATTACHMENT 200 GVI N
GENERAL VISUAL INSPECTION OF ATTACHMENT TO SKIN
PANEL, FR16, STG 3 LH/RH
Skills :
AF 1 0.00 MHrs
ALI 531114-01-1
AMM 531100/6
AMT 531100-210-006
T 5 700 CY
I 5 700 CY
ALL 531114-01-1 FUSELAGE SKIN EXTERNAL SURFACE 200 DI Y
DETAILED INSPECTION OF FUSELAGE SKIN ABOVE
WINDSHIELD, BETWEEN FR 4 AND FR 12, EXTERNAL SURFACE,
LH/RH
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
ALI 531117-01-1
AMM 531100/6
AMT 531100-210-810
T 14 500 CY
I 14 500 CY
ALL 531117-01-1 FUSELAGE SIDE PANEL 200 GVI Y
GENERAL VISUAL INSPECTION OF FUSELAGE SIDE PANEL,
BELOW COCKPIT SIDE WINDOWS, BETWEEN FR 1 AND FR 12,
Skills :
AF 1 0.20 MHrs
ALI 531118-01-1
AMM 531100/6
AMT 531100-210-811
T 4 300 CY
I 4 300 CY
ALL 531118-01-1 FUSELAGE SIDE PANEL 200 GVI Y
GENERAL VISUAL INSPECTION OF AREA FORWARD OF
WINDSHIELD, ABOVE SIDE PANEL, FROM FR 0 TO FR 4,
Skills :
AF 1 0.25 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531119-01-2
AMM 531100/6
AMT 531100-210-007
MRB 531119-01-2
T 30 000 CY
I 11 700 CY
ALL 531119-01-2 LOWER LAP JOINT EXTERNAL SURFACE 100 DI Y
DETAILED INSPECTION OF UPPER SKIN OF LOWER
LONGITUDINAL LAP JOINT, BETWEEN FR 9 AND FR 20,
NOTE 1 : 100% LIMIT = 35300 FC
NOTE 2 : SAMPLING 20%
Skills :
AF 1 0.60 MHrs
ALI 531124-01-2
AMM 531100/6
AMT 531100-210-011
T 33 600 CY
I 7 900 CY
ALL 531124-01-2 SPLICE AT FR 20 127 DI
128
Y
DETAILED INSPECTION OF FR 20 SPLICE, BETWEEN STRINGER
30 AND STRINGER 32, LH/RH
PREP. : INSULATION DISPLACED;
Access panels :
824
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531127-01-1
AMT 531100-220-807
MRB 531127-01-1
NTM 53-11-27
T 30 000 CY
I 9 900 CY
ALL 531127-01-1 MAIN STRUCTURE 211 SDI
212
N
SPECIAL DETAILED INSPECTION (HFEC) OF LATERAL
SPLICING, FR11, LH/RH
PREPARATION:
INSULATION REMOVED;
LINING REMOVED;
NOTE 1: 100% THRESHOLD =42400 FC
Skills :
AVI 1 1.20 MHrs
ALI 531129-02-3
AMT 531100-220-001
NTM 53-11-29
T 34 600 CY
I 9 000 CY
ALL 531129-02-3 WINDSHIELD CTR POST LWR ATTACHMENT 211 SDI
212
N
SPECIAL DETAILED INSPECTION (HFEC) OF WINDSHIELD
CENTER POST, LOWER ATTACHMENT AREA, INTERNAL SIDE
PREP.: - LH/RH WINDSHIELDS
REMOVED;
- DISPLAY UNIT 4WT1
REMOVED;
- ANCHOR NUT SHIMS
REMOVED;
Access panels :
211LW 211MW
Skills :
AVI 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531133-02-1
AMT 531100-210-029
T 26 700 CY
I 5 700 CY
ALL 531133-02-1 WINDSHIELD SIDE POST LWR ATTACHMENT 211 SDI
212
N
SPECIAL DETAILED INSPECTION (HFEC) OF WINDSHIELD SIDE
POST AT FR 4, LOWER ATTACHMENT, INTERNAL SIDE, LH/RH
NOTE: THIS TASK IS AN ALTERNATIVE TO TASK 531133-01-1
PREPARATION: SLIDING WINDOW OPENED;
Access panels :
211NW 211PW 212NW 212PW
Skills :
AVI 1 1.00 MHrs
ALI 531135-01-2
AMM 531100/6
AMT 531100-210-026
NTM 53-11-35
T 28 800 CY
I 11 000 CY
ALL 531135-01-2 WINDSHIELD SIDE POST UPR ATTACHMENT 211 SDI
212
Y
SPECIAL DETAILED INSPECTION (ROTO) OF WINDSHIELD SIDE
POST AT FR 4, UPPER ATTACHMENT, INTERNAL SIDE, LH/RH
PREP. : BOLTS REMOVED
SLIDING WINDOW OPENED
Access panels :
211BC 211KC 211LC 211NW 212BC 212KC 212LC
212NW
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531155-02-1
AMM 531100/6
AMT 531100-210-027
NTM 53-11-55
T 22 700 CY
I 10 300 CY
ALL 531155-02-1 DOOR STOPS AT FR20 221 SDI
222
Y
SPECIAL DETAILED INSPECTION (HFEC AND ROTO) OF DOOR
FR 20, AT DOUBLE JOGGLE AREA IN OUTER FLANGE OF FR,
AT DOOR STOPS NUMBER 1 AND 7 LOCATION, LH/RH
LINING REMOVED
INSULATION REMOVED
Access panels :
831 841
Skills :
NDT 1 1.00 MHrs
ALI 531157-01-2
AMM 531100/6
AMT 531100-210-021
T 24 000 CY
I 7 000 CY
ALL 531157-01-2 CONTINUITY AND ANGLE FITTINGS 127 DI
128
Y
DETAILED INSPECTION OF CONTINUITY FITTING BETWEEN FR
20 AND FR 21, AND ANGLE FITTING, BOTH SIDES OF FR 21,
AT STRINGER 41 LOCATION, LH/RH
PREP : FLOOR PANELS REMOVED;
LADDER.
Access panels :
824
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531170-01-2
AMM 531100/6
AMT 531100-210-038
MRB 531170-01-2
T 30 000 CY
I 5 500 CY
ALL 531170-01-2 COCKPIT WINDSHIELD LOWER FRONT FTG 200 DI Y
DETAILED INSPECTION OF COCKPIT WINDSHIELD, LOWER
FRONT FITTING AT FR 4, LOWER ATTACHMENT, EXTERNAL
SURFACE, LH/RH
PREP. : LOWER RETAINERS
NOTE 1: THIS TASK IS AN ALTERNATIVE TO TASK 531170-02-2
NOTE 2: 100% LIMIT = 36700 FC
Skills :
AF 1 0.30 MHrs
ALI 531170-02-2
AMM 531100/6
AMT 531100-210-039
MRB 531170-02-2
NTM 53-11-70
T 24 000 CY
I 15 000 CY
ALL 531170-02-2 COCKPIT WINDSHIELD LOWER FRONT FTG 200 SDI Y
SPECIAL DETAILED INSPECTION (HFEC) OF COCKPIT
WINDSHIELD, LOWER FRONT FITTING AT FR 4, LOWER
ATTACHMENT, EXTERNAL SURFACE, LH/RH.
PREP. : LOWER RETAINERS
NOTE 2: 100% LIMIT = 36700 FC
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 531184-01-2
AMT 531100-210-045
T 34 000 CY
I 13 500 CY
ALL 531184-01-2 FWD PRESSURE BULKHEAD VERTICAL POSTS 211 DI
212
N
DETAILED INSPECTION OF CENTRAL AND ADJACENT VERTICAL
POSTS OF FORWARD PRESSURE BULKHEAD AND WEB ASSEMBLY,
UPPER PORTION
PREPARATION: INSULATION REMOVED;
Access panels :
811
Skills :
AF 1 0.40 MHrs
ALI 532104-01-1
AMT 532100-220-802
NTM 53-21-04
T 86 900 FH
T 43 400 CY
I 71 200 FH
I 35 600 CY
ALL 532104-01-1 FLOOR STRUCTURE 131 SDI
132
N
SPECIAL DETAILED INSPECTION (ROTO) OF ATTACHMENT
AREA OF FR25 LH TO FR34 LH AND FR29 RH TO FR34 RH
TO CABIN FLOOR BEAMS, INTERNAL STRUCTURE
PREPARATION:
BOLTS REMOVED;
CEILING PANELS
REMOVED;
INSULATION
DISPLACED;
LINING REMOVED;
Access panels :
825
Skills :
AVI 1 1.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532132-01-1
AMM 532100/6
AMT 532100-200-027
T 24 000 CY
I 13 800 CY
ALL 532132-01-1 FWD CARGO DOOR HINGE FITTING 100 DI
132
Y
DETAILED INSPECTION OF FUSELAGE FORWARD CARGO DOOR
HINGE FITTING AND EXTERNAL ATTACHMENT AREA
NOTE : CPCP
Access panels :
825
Skills :
AF 1 1.80 MHrs
ALI 532135-01-2
AMM 532100/6
AMT 532100-210-002
MRB 532135-01-1
T 2 400 FH
T 1 200 CY
T 6 YE
I 2 400 FH
I 1 200 CY
I 6 YE
ALL 532135-01-2 FWD CARGO DOOR CUTOUT LATERAL FRAMES 132 GVI Y
GENERAL VISUAL INSPECTION OF FORWARD CARGO DOOR
CUTOUT, VISIBLE PART OF LATERAL FR 24A AND FR 28
NOTE: CPCP
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532137-01-1
AMM 532100/6
AMT 532100-200-004
T 19 400 FH
T 9 700 CY
I 19 400 FH
I 9 700 CY
ALL 532137-01-1 FWD CARGO DOOR CUTOUT PANELS 100 DI
132
Y
DETAILED INSPECTION OF FORWARD CARGO DOOR CUTOUT
PANELS, UPPER AND LOWER CORNERS, EXTERNAL SURFACE
Access panels :
825
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532150-01-1
AMM 532100/6
AMT 532100-200-022
MRB 532150-01-1
T 35 900 FH
T 13 500 CY
T 6 YE
I 35 900 FH
I 13 500 CY
I 6 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532150-01-1 FWD EMERGENCY EXIT CUTOUT UPR CORNERS 231 DI Y R
DETAILED INSPECTION OF FORWARD EMERGENCY EXIT SKIN
CUT OUT, UPPER CORNERS, EXTERNAL SURFACE, LH
.
NOTE : CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
833
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532150-01-2
AMM 532100/6
AMT 532100-200-022
MRB 532150-01-2
T 33 500 FH
T 12 600 CY
T 6 YE
I 33 500 FH
I 12 600 CY
I 6 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5343
5427
5469
5709
5994
532150-01-2 FWD EMERGENCY EXIT CUTOUT UPR CORNERS 231 DI Y R
CUT OUT, UPPER CORNERS, EXTERNAL SURFACE, LH
.
NOTE : CPCP
Access panels :
833
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532151-01-1
AMM 532100/6
AMT 532100-220-004
MRB 532151-01-1
T 25 100 FH
T 9 500 CY
T 6 YE
I 25 100 FH
I 9 500 CY
I 6 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532151-01-1 FWD EMERG. EXIT SKIN CUTOUT 232 DI Y R
CUT OUT, UPPER CORNERS, EXTERNAL SURFACE, RH
NOTE : CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
843
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532151-01-2
AMM 532100/6
AMT 532100-220-004
MRB 532151-01-2
T 24 500 FH
T 9 200 CY
T 6 YE
I 24 500 FH
I 9 200 CY
I 6 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
532151-01-2 FWD EMERG. EXIT SKIN CUTOUT 232 DI Y R
CUT OUT, UPPER CORNERS, EXTERNAL SURFACE, RH
.
NOTE : CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
843
ALI 532152-01-2
AMM 532100/6
AMT 532100-210-015
T 42 000 FH
T 20 000 CY
I 42 000 FH
I 20 000 CY
ALL 532152-01-2 FWD EMERG. EXIT SKIN CUTOUT 200 GVI Y
GENERAL VISUAL INSPECTION OF FUSELAGE SKIN AROUNDN
FORWARD EMERGENCY EXIT SKIN CUT OUT BETWEEN FR 35 AND
FR 35.3 AND FROM STRINGER 8 TO STRINGER 23, EXTERNAL
SURFACE, LH/RH
NOTE: CREDIT CAN BE TAKEN FROM PREVIOUS
ACCOMPLISHMENT OF ZONAL TASK ZL-200-02-4.
Skills :
AF 1 0.20 MHrs
ALI 532155-01-2
AMM 532100/6
AMT 532100-200-012
MRB 532155-01-2
T 32 400 CY
I 10 500 CY
ALL 532155-01-2 FRAME SPLICES FR 24-34 131 DI Y
DETAILED INSPECTION OF FRAME SPLICES AT STRINGER 35
LH, FROM FR 24 TO FR 34
PREP. : CARGO FLOOR PANELS
INSULATION REMOVED
Skills :
AF 1 3.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532156-01-1
AMM 532100/6
AMT 532100-210-004
T 42 000 FH
T 24 000 CY
I 12 600 FH
I 4 700 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532156-01-1 FUSELAGE SKIN BETWEEN FR 35.4 & FR 35.8 200 GVI Y R
GENERAL VISUAL INSPECTION OF FUSELAGE EXTERNAL
SURFACE, BETWEEN FR 35.4 AND FR 35.8 FROM STRINGER 8
TO STRINGER 14 AND STRINGER 18 TO STRINGER 23, LH/RH
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.20 MHrs
ALI 532156-01-2
AMM 532100/6
AMT 532100-210-004
T 42 000 FH
T 24 000 CY
I 11 800 FH
I 4 400 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
532156-01-2 FUSELAGE SKIN BETWEEN FR 35.4 & FR 35.8 200 GVI Y R
SURFACE, BETWEEN FR 35.4 AND FR 35.8 FROM STRINGER 8
TO STRINGER 14 AND STRINGER 18 TO STRINGER 23, LH/RH
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532165-01-3
AMM 532100/6
AMT 532100-210-005
T 3 600 CY
I 3 600 CY
ALL 532165-01-3 FUSELAGE SKIN BETWEEN FR 24 AND 35.8 100 GVI Y
SURFACE, FROM STRINGER 23 LH/RH TO BOTTOM CENTERLINE,
EXCEPT AREAS COVERED BY BELLY FAIRING
NOTE: INSPECTION BETWEEN FR 24 AND FR 35.8.
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
ALI 532170-01-2
AMM 532100/6
AMT 532100-210-006
MRB 532170-01-4
T 9 100 CY
T 6 YE
I 9 200 CY
I 6 YE
ALL 532170-01-2 FWD CARGO DOOR LOCK FITTINGS AND 132 GVI Y
SURROUNDING STRUCTURE
GENERAL VISUAL INSPECTION OF FORWARD CARGO DOOR LOCK
FITTINGS AND SURROUNDING STRUCTURE, EXTERNAL PORTION
NOTE: INSPECTION BETWEEN FR 25 AND FR 27A (6 PLACES)
NOTE: CPCP
Access panels :
825
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 532186-01-2
AMT 532100-200-024
MRB 532186-01-2
NTM 53-21-86
T 60 000 FH
T 30 000 CY
I 34 400 FH
I 13 300 CY
ALL 532186-01-2 CIRCUMFERENTIAL JOINT AT FR 35 200 SDI N
SPECIAL DETAILED INSPECTION (LFEC) OF CIRCUMFERENTIAL
JOINT AT FR 35, BETWEEN STRINGER 10 LH AND STRINGER
10 RH, EXTERNAL SIDE.
NOTE 1: 100 % THRESHOLD = 42700 FC OR 60000 FH
Skills :
AVI 1 0.00 MHrs
ALI 532187-01-1
AMM 532100/6
AMT 532100-200-025
MRB 532187-01-1
NTM 53-21-87
T 60 000 FH
T 30 000 CY
I 52 500 FH
I 17 500 CY
ALL 532187-01-1 CIRCUMFERENTIAL JOINT AT FR 35.8 200 SDI Y
SPECIAL DETAILED INSPECTION (LFEC) OF CIRCUMFERENTIAL
JOINT AT FR 35.8 BETWEEN STRINGER 10 LH AND
STRINGER 10 RH, EXTERNAL SIDE
NOTE : 100% LIMIT = 44300 FC OR 60000 FH
Skills :
NDT 1 0.50 MHrs
ALI 532190-01-1
AMM 532100/6
AMT 532100-210-007
T 48 000 CY
I 8 100 CY
ALL 532190-01-1 FUSELAGE SKIN BETWEEN FR 25 AND FR 29 100 GVI Y
SURFACE AROUND WATER DRAIN PANEL CUTOUT, BETWEEN FR
25 AND FR 29 AT STRINGER 43 LH
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533105-01-4
AMM 533100/6
AMT 533100-210-003
MRB 533105-01-4
T 49 500 FH
T 18 000 CY
T 12 YE
I 29 400 FH
I 10 700 CY
I 6 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
533105-01-4 MLG BAY SIDE PANELS 147 DI
148
Y
DETAILED INSPECTION OF MLG BAY FUSELAGE SIDE PANELS
INSIDE MLG BAY, BETWEEN FR 42 AND FR 46, INCLUDING
SLANTED FRAMES AND SIDE BOX, LH/RH
NOTE 1 : 100% LIMIT = 24 YE OR 23600 FC OR 60000 FH
NOTE 3 : CPCP
Access panels :
734
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533105-01-8
AMT 533100-210-003
MRB 533105-01-8
T 12 YE
I 29 400 FH
I 10 700 CY
I 6 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
533105-01-8 MLG BAY SIDE PANELS 147 DI
148
N R
DETAILED INSPECTION OF MLG BAY FUSELAGE SIDE PANELS
INSIDE MLG BAY, BETWEEN FR 42 AND FR 46, INCLUDING
SLANTED FRAMES AND SIDE BOX, LH/RH
ACCOMPLISHMENT OF TASK 533105-01-2.
NOTE 1: 100% THRESHOLD = 24 YE OR 27100 FC OR 60000 FH
NOTE 3: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
734 744
Skills :
AF 1 1.00 MHrs
ALI 533109-01-2
AMM 533100/6
AMT 533100-210-005
T 55 000 FH
T 20 000 CY
I 27 800 FH
I 10 100 CY
ALL 533109-01-2 PRESSURE DECK MEMBRANES UPR SURFACE 145 DI
146
Y
DETAILED INSPECTION OF UPPER SURFACES OF PRESSURE
DECK MEMBRANES AND SIDE BOXES, BETWEEN FR 42 AND FR
46, INCLUDING CONNECTIONS TO LONGITUDINAL BEAMS AND
SUPPORT RIBS, LH/RH
PREP. : AIR DUCT
CABIN FLOOR PANELS
INSULATION REMOVED
Access panels :
NONE
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533111-01-2
AMM 533100/6
AMT 533100-210-006
MRB 533111-01-2
T 60 000 FH
T 22 000 CY
T 12 YE
I 22 000 FH
I 8 000 CY
I 6 YE
ALL 533111-01-2 PRESSURE DECK MEMBRANES LWR SURFACE 147 DI
148
Y
DETAILED INSPECTION OF LOWER SURFACE OF PRESSURE DECK
MEMBRANES, BETWEEN FR 42 AND FR 46, INCLUDING
CONNECTIONS TO LONGITUDINAL BEAMS, SIDE BOXES,
SUPPORT RIBS, REAR SPAR OF CENTER WING BOX AND
PRESSURE BULKHEAD, LH/RH
NOTE 1 : 100% LIMIT = 24 YE OR 22000 FC OR
60500 FH
NOTE 3 : CPCP
Access panels :
734 744
Skills :
AF 1 1.50 MHrs
ALI 533122-01-2
AMM 533100/6
AMT 533100-210-019
T 33 000 CY
I 9 200 CY
ALL 533122-01-2 CIRCUMFERENTIAL SPLICE AT FR 47 200 DI Y
DETAILED INSPECTION OF SKIN IN CIRCUMFERENTIAL SPLICE
AND STRINGER COUPLING AREA AT FR 47, FROM STRINGER
10, LH/RH TO CROWN CENTERLINE, EXTERNAL SURFACE
NOTE 1: 100% LIMIT = 33000 FC
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533130-01-3
AMM 533100/6
AMT 533100-210-010
MRB 533130-01-3
T 27 800 CY
T 12 YE
I 13 500 CY
I 12 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
533130-01-3 ANTI COLLISION LIGHT SKIN CUTOUT 200 DI Y R
DETAILED INSPECTION OF SKIN AROUND ANTI COLLISION
LIGHT CUTOUT, BETWEEN FR 40 AND FR 41 AND BETWEEN
STRINGER 1, LH/RH, EXTERNAL SURFACE
PREP. : COVER OF ANTI-COLLISION LIGHT AND
ANTI-COLLISION LIGHT REMOVED
NOTE 3: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
NONE
Skills :
AF 1 0.20 MHrs
ALI 533130-01-4
AMM 533100/6
AMT 533100-210-010
MRB 533130-01-4
T 27 800 CY
T 12 YE
I 11 500 CY
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
533130-01-4 ANTI COLLISION LIGHT SKIN CUTOUT 200 DI Y
DETAILED INSPECTION OF SKIN AROUND ANTI COLLISION
LIGHT CUTOUT, BETWEEN FR 40 AND FR 41 AND BETWEEN
STRINGER 1, LH/RH, EXTERNAL SURFACE
PREP. : COVER OF ANTI-COLLISION LIGHT AND
ANTI-COLLISION LIGHT REMOVED
NOTE 3: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 533100-210-011
MRB 533131-01-5
T 26 300 CY
T 12 YE
I 15 700 CY
I 12 YE
ALL 533131-01-5 ADF1 ANTENNA SKIN CUTOUT 200 DI N
DETAILED INSPECTION OF SKIN AROUND ADF 1 ANTENNA
CUTOUT, BETWEEN FR 44 AND FR 45 AND BETWEEN STRINGER
1, LH/RH, EXTERNAL SURFACE
PREPARATION:COVER OF ANTENNA AND ANTENNA REMOVED;
NOTE 1: CREDIT CAN BE TAKEN FROM PREVIOUS
NOTE 2: 100% THRESHOLD=24 YE OR 26300 FC
NOTE 3: CPCP
Skills :
AF 1 0.00 MHrs
ALI 533132-01-2
AMM 533100/6
AMT 533100-210-020
MRB 533132-01-2
T 30 000 CY
I 9 300 CY
ALL 533132-01-2 WINDOW FORGINGS FR 35.8-47 200 DI Y
DETAILED INSPECTION OF VISIBLE PART OF WINDOW
FORGINGS AND FUSELAGE SKIN IN WINDOW FORGING AREA,
LH/RH, EXTERNAL SURFACE
NOTE 1: INSPECTION BETWEEN FR 35.8 AND FR 47.
NOTE 2: 100% LIMIT = 36300 FC
Skills :
AF 1 2.65 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533138-01-2
AMT 533100-210-027
MRB 533138-01-2
T 30 000 CY
I 10 000 CY
ALL 533138-01-2 LONGITUDINAL LAP JOINT AT FR 42 241 DI
242
N
DETAILED INSPECTION OF LOWER SKIN OF LONGITUDINAL LAP
JOINT AT STRINGER 18 LH AND STRINGER 18 RH, IN RUNOUT
AREA AT FR 42, INTERNAL
NOTE: THIS TASK IS AN ALTERNATIVE INSPECTION TO TASK
533138-02-2
PREPARATION: LINING AND INSULATION REMOVED;
NOTE 1: 100% THRESHOLD = 40000 FC
Skills :
AF 1 0.50 MHrs
ALI 533138-02-2
AMT 533100-220-004
MRB 533138-02-2
NTM 53-31-38
T 30 000 CY
I 12 000 CY
ALL 533138-02-2 LONGITUDINAL LAP JOINT AT FR 42 241 SDI
242
N
SPECIAL DETAILED INSPECTION (HFEC) OF LOWER SKIN OF
LONGITUDINAL LAP JOINT AT STRINGER 18 LH AND STRINGER
18 RH, IN RUNOUT AREA AT FR 42, INTERNAL
PREPARATION: LINING AND INSULATION REMOVED;
NOTE 1: THIS TASK IS AN ALTERNATIVE INSPECTION TO TASK
533138-01-2
NOTE 2: 100% THRESHOLD= 40000 FC
Skills :
AVI 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533140-01-3
AMM 533100/6
AMT 533100-220-006
MRB 533140-01-3
NTM 53-31-40
T 30 000 CY
I 17 000 CY
ALL 533140-01-3 SPLICE PLATE AT FR 47 200 SDI Y
SPECIAL DETAILED INSPECTION (LFEC) OF SPLICE PLATE AT
CIRCUMFERENTIAL SKIN SPLICE AT FR 47, FROM STRINGER
10, LH/RH, TO CROWN CENTER LINE
NOTE : 100% LIMIT = 40000 FC
Skills :
NDT 1 0.50 MHrs
ALI 533141-01-2
AMM 533100/6
AMT 533100-210-025
MRB 533141-01-2
T 60 000 FH
T 30 000 CY
I 19 600 FH
I 9 800 CY
ALL 533141-01-2 FUSELAGE SKIN BETWEEN FR 35.8 AND 36 190 DI Y
DETAILED INSPECTION OF FUSELAGE SKIN, BETWEEN FR 35.8
AND FR 36 AND BETWEEN STRINGER 25 AND STRINGER 30,
LH/RH, EXTERNAL SURFACE
Access panels :
191BT 191EB 192BT 192EB
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533143-01-1
AMM 533100/6
AMT 533100-210-029
T 80 000 FH
T 40 000 CY
I 21 200 FH
I 10 600 CY
ALL 533143-01-1 SIDE BOX BEAM IN AREA OF FR 46 147 DI
148
Y
DETAILED INSPECTION OF SIDE BOX BEAM IN AREA OF
ATTACHMENT TO FR 46, LH/RH
Access panels :
734 744
Skills :
AF 1 0.40 MHrs
ALI 533144-01-1
AMM 533100/6
AMT 533100-210-030
MRB 533144-01-1
T 66 200 FH
T 33 100 CY
I 25 600 FH
I 12 800 CY
ALL 533144-01-1 FRAME ATTACHMENTS TO PRESSURE FLOOR 145 DI
146
Y
DETAILED INSPECTION OF FRAME ATTACHMENTS TO PRESSURE
FLOOR FROM FR 42 TO FR 46, LH/RH
PREP. : LINING REMOVED
INSULATION REMOVED
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533152-01-3
AMM 533100/6
AMT 533100-210-012
MRB 533152-01-3
T 31 000 CY
T 12 YE
I 9 100 CY
I 6 YE
ALL 533152-01-3 PRESSURE BULKHEAD AT FR 35.8 FWD FACE 137 DI
138
Y
DETAILED INSPECTION OF PRESSURE BULKHEAD FORWARD FACE
NOTE 1: INSPECTION AT FR 35.8 AND PRESSURE DECK UPPER
SURFACE, BETWEEN FR 35.8 AND FR 36, INCLUDING
CONNECTIONS TO CENTER WING BOX AT FR35.8 AND FR 36.
NOTE 2: CPCP
PREP. : AIR DUCT
RECIRCULATION FILTER REMOVED
INSULATION REMOVED
Access panels :
NONE 131NW 131PW 132PW
Skills :
AF 1 0.90 MHrs
ALI 533155-03-1
AMM 533100/6
AMT 533100-220-007
MRB 533155-03-1
NTM 53-31-55
T 60 000 FH
T 30 000 CY
I 39 300 FH
I 17 500 CY
ALL 533155-03-1 KEEL BEAM BOX ELLIPTICAL CUTOUT 147 SDI
148
Y
SPECIAL DETAILED INSPECTION (HFEC) OF KEELBEAM BOX
ELLIPTICAL CUTOUT AT FR 46, LH/RH
Access panels :
734 744
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 533186-01-1
AMT 533100-220-805
NTM 53-31-86
T 80 000 FH
T 40 000 CY
I 30 000 FH
I 15 000 CY
ALL 533186-01-1 FR 35 FORWARD FACE TO PRESSURE BULKHEAD 137 SDI
138
N
ATTACHMENTS
SPECIAL DETAILED INSPECTION (HFEC) OF FR 35 FORWARD
FACE TO PRESSURE BULKHEAD ATTACHMENTS, AROUND
RIVETS AND HOLES BETWEEN STR 28 AND STR 31, LH/RH.
PREPARATION:
AIR CONDITIONING DUCTS REMOVED;
RECIRCULATION FILTERREMOVED;
INSULATION REMOVED;
Skills :
AVI 1 0.00 MHrs
ALI 533188-01-2
AMT 533100-220-806
T 30 300 CY
I 8 400 CY
ALL 533188-01-2 PRESSURE BULKHEAD, AFT FACE, LOWER PART 191 DI
192
N
PRESSURE BULKHEAD, AFT FACE, LOWER PART
OF VERTICAL STRUTS
DETAILED INSPECTION OF PRESSURE BULKHEAD, AFT FACE,
LOWER PART OF VERTICAL STRUTS (200 MM FROM BOTTOM) AT
Y= +/-765 MM (2 PLACES)
NOTE: PRESSURE BULKHEAD FR 35.8.
Access panels :
191BB 191EB 192EB 192FB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534108-01-2
AMM 534100/6
AMT 534100-210-810
T 3 000 CY
I 3 000 CY
ALL 534108-01-2 FUSELAGE EXTERNAL SURFACE FR 47-70 100 GVI Y
SURFACE, BETWEEN FR 47 AND FR 70, FROM STRINGER 23,
LH/RH TO BOTTOM CENTERLINE, EXCEPT AREA COVERED BY
BELLY FAIRING
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
ALI 534111-01-2
AMM 534100/6
AMT 534100-210-002
MRB 534111-01-2
T 60 000 FH
T 28 800 CY
T 12 YE
I 41 700 FH
I 16 700 CY
I 12 YE
ALL 534111-01-2 ADF2 ANTENNA SKIN CUTOUT 200 DI Y
DETAILED INSPECTION OF SKIN AROUND ADF2 ANTENNA
CUTOUT, BETWEEN STRINGER 1, LH/RH, EXTERNAL SURFACE
NOTE 1: INSPECTION BETWEEN FR 47.1 AND FR 47.2.
FOR PRE 20053 AIRCRAFT RETROFITTED, THRESHOLD
IS TO BE COUNTED FROM SB EMBODIMENT.
NOTE 2: 100% LIMIT = 24 YE OR 28800 FC OR
60000 FH
NOTE 4: CPCP
PREP. :COVER OF ANTENNA AND ANTENNA REMOVED
Access panels :
NONE
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534112-01-7
AMT 534100-210-019
MRB 534112-01-7
T 60 000 FH
T 31 200 CY
T 12 YE
I 56 100 FH
I 18 700 CY
I 12 YE
ALL 534112-01-7 VHF3 ANTENNA SKIN CUTOUT 200 DI N
DETAILED INSPECTION OF SKIN AROUND VHF 3 ANTENNA
CUTOUT, BETWEEN STRINGER 1, LH/RH, EXTERNAL SURFACE
NOTE: INSPECTION BETWEEN
FR 52 AND FR 53: CREDIT CAN BE TAKEN FROM PREVIOUS
PREPARATION: ANTENNA REMOVED;
NOTE 1: 100% THRESHOLD=24 YE OR 31200 FC OR 60000 FH
NOTE 3: CPCP
Skills :
AF 1 0.00 MHrs
ALI 534113-01-2
AMM 534100/6
AMT 534100-210-020
MRB 534113-01-2
T 30 000 CY
I 10 900 CY
ALL 534113-01-2 CIRCUMFERENTIAL SKIN SPLICE AT FR 64 200 DI Y
AND STRINGER COUPLING AREAS AT FR 64, FROM STRINGER
10, LH/RH TO CROWN CENTER LINE, EXTERNAL SURFACE
NOTE 1 : 100% LIMIT = 36000 FC
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534121-01-4
AMT 534100-220-010
MRB 534121-01-4
NTM 53-41-21
T 30 000 CY
I 15 000 CY
ALL 534121-01-4 REAR FUSELAGE 200 SDI N
CIRCUMFERENTIAL SKIN SPLICE AT FR 64, FROM STRINGER
10, LH/RH TO CROWN CENTERLINE
NOTE 1: 100% THRESHOLD = 40000 FC
Skills :
NDT 1 1.00 MHrs
AMT 534100-220-808
NTM 53-41-24
T 60 000 FH
T 30 900 CY
I 14 400 FH
I 7 200 CY
ALL 534124-01-4 REAR FUSELAGE 263 SDI
264
N
SPECIAL DETAILED INSPECTION (HFEC) OF AFT PASSENGER/
CREW DOOR CUTOUT, AFT UPPER CORNER BETWEEN STRINGER 8
AND STRINGER 10, FRAME 68 WEB JOINT TO DOOR FRAME,
AFT FACE, LH/RH
PREP.: INSULATION REMOVED;
LINING REMOVED;
Access panels :
832 842
Skills :
NDT 1 1.34 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-220-809
NTM 53-41-25
T 60 000 FH
T 30 000 CY
I 7 000 FH
I 3 500 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
534125-01-4 REAR FUSELAGE 100 SDI N
SPECIAL DETAILED INSPECTION (HFEC) OF FUSELAGE SKIN
EXTERNAL SURFACE AT WATER SERVICE PANEL CUTOUT,
BETWEEN FRAME 65 AND FRAME 66 AT AND BELOW STRINGER
37, TWO UPPER RIVET ROWS AT SKIN TO REINFORCEMENT
JOINT, LH
NOTE 1 : 100% LIMIT = 41500 FC OR 60000 FH
NOTE 3 : ALI WFD TASK
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5469
5495
5555
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-220-810
NTM 53-41-26
T 60 000 FH
T 34 400 CY
I 4 800 FH
I 2 400 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
534126-01-4 REAR FUSELAGE 100 SDI N
EXTERNAL SURFACE AT WASTE SERVICE PANEL CUTOUT,
BETWEEN FRAME 65 AND FRAME 66 BELOW STRINGER 33,
TWO UPPER RIVET ROWS AT SKIN TO REINFORCEMENT
JOINT, RH
NOTE: ALI WFD TASK
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5469
5495
5555
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-220-811
NTM 53-41-27
T 52 800 FH
T 26 400 CY
I 11 200 FH
I 5 600 CY
264
N
SPECIAL DETAILED INSPECTION (HFEC) OF FUSELAGE
INTERNAL STRUCTURE, LATERAL FRAME 68 JOINT TO UPPER
FRAME 68 BETWEEN STRINGER 4 AND STRINGER 5, LH/RH
PREP.: INSULATION REMOVED;
LINING REMOVED;
Access panels :
832 842
Skills :
NDT 1 0.40 MHrs
AMT 534100-220-812
NTM 53-41-29
T 60 000 FH
T 30 000 CY
I 17 600 FH
I 8 800 CY
262
N
SPECIAL DETAILED INSPECTION (ROTO) OF AFT
PASSENGER/CREW DOOR CUTOUT, DOOR STOP FITTINGS HOLES
AT FRAME 66 WEB, LH/RH
PREP.: BOLTS REMOVED;
LINING REMOVED;
Access panels :
832 842
Skills :
NDT 1 0.94 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-220-813
NTM 53-41-30
T 60 000 FH
T 30 000 CY
I 17 600 FH
I 8 800 CY
262
N
SPECIAL DETAILED INSPECTION (ROTO) OF AFT
PASSENGER/CREW DOOR CUTOUT, DOOR STOP FITTINGS HOLES
AT FRAME 68 WEB, LH/RH
LINING REMOVED;
Access panels :
832 842
Skills :
NDT 1 0.94 MHrs
AMT 534100-210-814 T 47 400 FH
T 23 700 CY
I 47 400 FH
I 23 700 CY
ALL 534131-01-4 FUSELAGE SKIN BETWEEN FR 65 AND 70 100 GVI
200
N
GENERAL VISUAL INSPECTION OF FUSELAGE SKIN AROUND AFT
PASSENGER/CREW DOOR CUTOUTS, BETWEEN FR 65 AND FR 70
AND FROM STRINGER 6 TO STRINGER 26, EXTERNAL SURFACE
(EXCEPT AREA UNDER SCUFF PLATE), LH/RH
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534132-01-5
AMM 534100/6
AMT 534100-210-010
T 31 800 FH
T 15 900 CY
I 10 000 FH
I 20 000 CY
ALL 534132-01-5 AFT PAX/CREW DOOR CUTOUT UPR CORNER 260 DI Y
DETAILED INSPECTION OF AFT PASSENGER/CREW DOOR
CUTOUT, UPPER CORNERS, INCLUDING SKIN AND INTERNALLY
THE VISIBLE PORTION OF THE INTERNAL DOUBLER, LH/RH
Access panels :
832 842
Skills :
AF 1 0.15 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534140-01-5
AMM 534100/6
AMT 534100-210-815
T 60 000 FH
T 39 600 CY
I 7 000 FH
I 3 500 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
534140-01-5 FUSELAGE SKIN AROUND OUTFLOW VALVE 100 GVI Y R
GENERAL VISUAL INSPECTION OF FUSELAGE SKIN AROUND
OUTFLOW VALVE CUTOUT, BETWEEN FR 65 AND FR 66 AND
FROM STRINGER 26 TO STRINGER 31, RH, EXTERNAL SURFACE
Skills :
AF 1 0.15 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534140-01-7
AMT 534100-210-815
T 60 000 FH
T 39 500 CY
I 7 000 FH
I 3 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
534140-01-7 FUSELAGE SKIN AROUND OUTFLOW VALVE 100 GVI Y
CUTOUT
OUTFLOW VALVE CUTOUT, BETWEEN FR 65 AND FR 66 AND
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534141-01-6
AMM 534100/6
AMT 534100-210-816
T 59 400 FH
T 29 700 CY
I 21 400 FH
I 10 700 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
534141-01-6 FUSELAGE SKIN AROUND WATER SERVICE PANEL 100 DI Y R
CUTOUT
DETAILED INSPECTION OF FUSELAGE SKIN AROUND WATER
SERVICE PANEL CUTOUT, BETWEEN FRAME 65 AND FRAME 66
AND FROM STRINGER 37 TO STRINGER 43, LH, EXTERNAL
SURFACE
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.15 MHrs
ALI 534141-01-7
AMM 534100/6
AMT 534100-210-816
T 60 000 FH
T 30 500 CY
I 21 800 FH
I 10 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
534141-01-7 FUSELAGE SKIN AROUND WATER SERVICE PANEL 100 DI Y
CUTOUT
DETAILED INSPECTION OF FUSELAGE SKIN AROUND WATER
SERVICE PANEL CUTOUT, BETWEEN FRAME 65 AND FRAME 66
AND FROM STRINGER 37 TO STRINGER 43, LH, EXTERNAL
SURFACE
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534142-01-6
AMM 534100/6
AMT 534100-210-817
MRB 534142-01-6
T 60 000 FH
T 30 000 CY
I 27 200 FH
I 13 600 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
534142-01-6 FUSELAGE SKIN AROUND WASTE SERVICE PANEL 100 DI Y R
CUT OUT
DETAILED INSPECTION OF FUSELAGE SKIN AROUND WASTE
SERVICE PANEL CUTOUT, BETWEEN FR 65 AND FR 66 AND
ACCOMPLISHMENT OF TASK 534142-1-3
NOTE 2: 100% THRESHOLD: 35000 FC OR 60000 FH
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.15 MHrs
ALI 534142-01-7
AMM 534100/6
AMT 534100-210-817
MRB 534142-01-6
T 60 000 FH
T 30 000 CY
I 27 200 FH
I 13 600 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
534142-01-7 FUSELAGE SKIN AROUND WASTE SERVICE PANEL 100 DI Y R
CUTOUT
DETAILED INSPECTION OF FUSELAGE SKIN AROUND WASTE
SERVICE PANEL CUTOUT, BETWEEN FR 65 AND FR 66 AND
NOTE 2: 100% THRESHOLD: 35000 FC OR 60000 FH
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534145-01-1
AMM 534100/6
AMT 534100-220-012
NTM 53-41-45
T 28 300 CY
I 6 500 CY
ALL 534145-01-1 SPLICE PLATE AT FR 47.5 200 SDI Y
CIRCUMFERENTIAL SKIN SPLICE AT FR 47.5, FROM STRINGER
16, LH/RH, TO CROWN CENTER LINE
Skills :
AF 1 0.20 MHrs
ALI 534149-01-1
AMM 534100/6
AMT 534100-210-042
T 29 000 CY
I 9 000 CY
ALL 534149-01-1 CIRCUMFERENTIAL SPLICE 47.5 200 DI Y
AND STRINGER COUPLING AREAS AT FR 47.5, FROM STRINGER
16, LH/RH TO CROWN CENTER LINE, EXTERNAL SURFACE
Skills :
AF 1 0.20 MHrs
ALI 534157-01-6
AMM 534100/6
AMT 534100-210-038
MRB 534157-01-1
T 11 400 CY
T 6 YE
I 11 400 CY
I 6 YE
ALL 534157-01-6 AFT CARGO DOOR LOCK FITTINGS 152 GVI Y
GENERAL VISUAL INSPECTION OF AFT CARGO DOOR LOCK
FITTINGS AND SURROUNDING STRUCTURE, BETWEEN FR 53 AND
FR 55A, EXTERNAL PORTION (6 PLACES)
NOTE: CPCP
Access panels :
826
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-210-031 T 12 000 CY
I 12 000 CY
ALL 534159-01-3 AFT CARGO DOOR CUTOUT UPR/LWR CORNERS 152 DI
154
252
N
DETAILED INSPECTION OF AFT CARGO DOOR CUTOUT, UPPER
AND LOWER CORNERS, EXTERNAL SURFACE
Access panels :
826
Skills :
AF 1 0.60 MHrs
AMT 534100-220-803 T 1 400 CY
T 2 800 FH
I 2 800 FH
I 1 400 CY
ALL 534160-02-1 AFT CARGO DOOR CUTOUT LATERAL FRAMES 152 DI N
DETAILED INSPECTION OF AFT CARGO DOOR CUTOUT, VISIBLE
PART OF LATERAL FRAMES
NOTE: INSPECTION OF FR 52A AND FR 56.
Access panels :
826
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534171-01-2
AMT 534100-210-008
NTM 53-41-71
T 42 100 FH
T 21 000 CY
I 42 100 FH
I 21 000 CY
ALL 534171-01-2 BULK CARGO DOOR CUTOUT UPR CORNERS 162 SDI N
OF BULK CARGO DOOR CUTOUT AT UPPER CORNERS
ACCOMPLISMENT OF TASK 534171-01-3.
Access panels :
827
Skills :
NDT 1 0.20 MHrs
ALI 534172-01-2
AMM 534100/6
AMT 534100-210-804
MRB 534172-01-1
T 30 600 FH
T 15 300 CY
I 30 600 FH
I 15 300 CY
ALL 534172-01-2 BULK CARGO DOOR CUTOUT SEALING PROFILE 162 GVI Y
GENERAL VISUAL INSPECTION OF SEALING PROFILE OF BULK
CARGO DOOR CUTOUT AT UPPER CORNERS
NOTE : CPCP
Access panels :
827
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534183-01-1
AMM 534100/6
AMT 534100-210-820
T 24 000 CY
I 11 900 CY
ALL 534183-01-1 CIRCUMFERENTIAL JOINT ABOVE AFT 200 GVI Y
EMERGENCY EXIT DOOR
GENERAL VISUAL INSPECTION OF CIRCUMFERENTIAL JOINT
ABOVE AFT EMERGENCY EXIT DOOR AT FR 47.3 FROM
STRINGER 6 TO STRINGER 12, EXTERNAL SURFACE, LH/RH
Skills :
AF 1 0.20 MHrs
AMM 535100/6
AMT 535100-210-019
MRB 535103-01-2
T 35 000 FH
T 17 500 CY
I 35 000 FH
I 17 500 CY
ALL 535103-01-2 FUSELAGE SKIN AROUND CUTOUT FOR TAIL 300 GVI Y
COMPARTMENT ACCESS DOOR
CUTOUT FOR TAIL COMPARTMENT ACCESS DOOR, BETWEEN FR
70 AND FR 73 AND BETWEEN STRINGER 25 RH AND BOTTOM
CENTER LINE, EXTERNAL SURFACE
Skills :
AF 1 0.20 MHrs
AMT 535100-210-012 T 34 100 CY
I 14 400 CY
ALL 535162-01-2 FIN/FUSELAGE ATTACH FITTINGS OUTSIDE 323 DI N
DETAILED INSPECTION OF FIN TO FUSELAGE, FORWARD, MID
AND AFT ATTACH FITTINGS, OUTSIDE FUSELAGE, LH/RH
Access panels :
323AL 323AR
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 54 NACELLES / PYLONS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 545103-01-2
AMM 545100/6
AMT 545100-200-003
MRB 545103-01-2
T 8 300 CY
I 8 300 CY
ALL 545103-01-2 PYLON FWD MOUNT FITTING 415 DI
425
Y
DETAILED INSPECTION OF PYLON FORWARD MOUNT FITTING,
FORWARD OF RIB 1
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
AF 1 0.40 MHrs
ALI 545130-01-3
AMM 545100/6
AMT 545100-200-016
T 13 000 CY
I 13 000 CY
ALL 545130-01-3 PYLON LATERAL PANELS EDGE OF CUTOUTS 415 DI
425
Y
DETAILED INSPECTION OF PYLON, LATERAL PANELS, AT THE
EDGE OF ACCESS DOOR CUTOUTS, BETWEEN RIB 5 AND RIB 6,
LH/RH
Access panels :
415BL 415BR 425BL 425BR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 55 STABILIZERS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 552007-01-2
AMT 552000-200-006
NTM 55-20-07
SIL 55-037
T 12 YE
I 6 YE
2255
2261
2267
2303
2480
552007-01-2 ELEVATOR TOP AND BOTTOM SKIN PANELS 335 SDI
345
Y
SPECIAL DETAILED INSPECTION (THERMOGRAPHIC) OF
ELEVATOR TOP AND BOTTOM SKIN PANELS, LH/RH.
NOTE 1: THRESHOLD IS 12 YEARS SINCE THE DATE OF THE
FIRST FLIGHT.
NOTE 2: THIS TASK IS ALTERNATIVE TO THE TASK
552007-01-4.
Skills :
NDT 2 12.00 MHrs
ALI 552007-01-4
AMT 552000-200-006
NTM 55-20-07
SIL 55-037
T 12 YE
I 6 YE
2255
2261
2267
2303
2480
552007-01-4 ELEVATOR TOP AND BOTTOM SKIN PANELS 335 SDI
345
Y R
SPECIAL DETAILED INSPECTION (THERMOGRAPHIC) OF
ELEVATOR TOP AND BOTTOM SKIN PANELS, LH/RH.
NOTE 1: THRESHOLD IS 12 YEARS SINCE THE DATE OF THE
FIRST FLIGHT.
NOTE 2: THIS TASK IS ALTERNATIVE TO THE TASK
552007-01-2.
NOTE 3: RII TASK
PREP. : ELEVATOR REMOVED;
Skills :
NDT 2 12.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 571170-01-3
AMM 571000/6
AMT 571000-220-006
NTM 57-11-47
T 60 000 FH
T 35 000 CY
I 18 200 FH
I 9 100 CY
ALL 571170-01-3 INSPECTION OF CENTER WING BOX 191 SDI
192
Y
SPECIAL DETAILED INSPECTION (US) OF CENTER WING BOX,
CRUCIFORM FITTING, REAR SPAR AT THE LEVEL OF FRAME
42. LH/RH
Access panels :
191DT 191ET 192DT 192ET
Skills :
NDT 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 571185-01-3
AMM 571000/6
AMT 571000-200-026
NTM 57-11-85
T 52 900 FH
T 20 000 CY
I 14 600 FH
I 5 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
571185-01-3 OUTER WING UPPER HALF OF VERTICAL TEE 540 SDI
640
Y R
SPECIAL DETAILED INSPECTION OF OUTER WB- (HOLES ON)
UPPER HALF OF VERTICAL TEE FITTING AT JUNCTION WITH
RIB 1 AND REAR SPAR, LH/RH
PREP. : SEALANT TO BE REMOVED
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
Skills :
NDT 1 1.00 MHrs
ALI 571185-01-4
AMM 571000/6
AMT 571000-200-026
NTM 57-11-85
T 42 000 FH
T 24 000 CY
I 13 200 FH
I 4 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
571185-01-4 OUTER WING UPPER HALF OF VERTICAL TEE 540 SDI
640
Y
SPECIAL DETAILED INSPECTION OF OUTER WB- (HOLES ON)
UPPER HALF OF VERTICAL TEE FITTING AT JUNCTION WITH
RIB 1 AND REAR SPAR, LH/RH
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572004-01-2
AMM 572000/6
AMT 572000-200-004
MRB 572004-01-2
T 49 700 FH
T 30 000 CY
I 24 800 FH
I 15 000 CY
ALL 572004-01-2 OUTER WING FRONT SPAR AFT FACE 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, FRONT SPAR AFT
FACE, BETWEEN RIB 1 AND RIB 8, EXCLUDING THE AREA
INSIDE THE DRY BAY
NOTE 3: 100% LIMIT = 44000 FC OR 60000 FH
Access panels :
540AB 540AZ 540BB 540CB 640AB 640AZ 640BB
640CB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572007-01-4
AMM 572000/6
AMT 572000-200-005
MRB 572007-01-4
T 17 700 FH
T 10 800 CY
T 12 YE
I 17 700 FH
I 10 800 CY
I 6 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572007-01-4 OUTER WING REAR SPAR AFT FACE 571 DI
671
Y R
DETAILED INSPECTION OF OUTER WING, REAR SPAR AFT
FACE, BETWEEN RIB 1 AND GEAR SUPPORT RIB 5, INCLUDING
REAR SPAR ANGLE
NOTE : CPCP
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572007-01-5
AMM 572000/6
AMT 572000-200-005
T 15 800 FH
T 9 600 CY
T 12 YE
I 15 800 FH
I 9 600 CY
I 6 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572007-01-5 OUTER WING REAR SPAR AFT FACE 571 DI
671
Y R
FACE, BETWEEN RIB 1 AND GEAR SUPPORT RIB 5, INCLUDING
REAR SPAR ANGLE
NOTE : CPCP
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572011-01-4
AMM 572000/6
AMT 572000-200-008
T 60 000 FH
T 30 000 CY
I 19 000 FH
I 11 600 CY
ALL 572011-01-4 OUTER WING REAR SPAR FWD FACE 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, REAR SPAR
FORWARD FACE, BETWEEN RIB 1 AND RIB 8, INCLUDING
THE REGION OF THE JOINT AT RIB 6 AND TOP AND
BOTTOM FLANGES
Access panels :
540AB 540BB 540BZ 540CB 640AB 640BB 640BZ
640CB
Skills :
AF 1 2.00 MHrs
AMT 572000-210-802 T 60 000 FH
T 42 800 CY
I 15 900 FH
I 10 000 CY
ALL 572014-01-7 OUTER WING TOP SKIN 500 GVI
600
N
OUTER WING TOP SKIN
GENERAL VISUAL INSPECTION OF OUTER WING, TOP SKIN,
UPPER SURFACE AT ATTACHMENTS TO RIBS AND STRINGERS
BETWEEN RIB 1 AND RIB 8 FROM FRONT SPAR TO REAR SPAR
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572020-01-5
AMM 572000/6
AMT 572000-200-010
MRB 572020-01-5
T 55 000 FH
T 30 000 CY
I 23 200 FH
I 12 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572020-01-5 OUTER WING TOP SKIN RIB 1 AND 8 540 DI
640
Y R
DETAILED INSPECTION OF OUTER WING, TOP SKIN
STRINGERS, BETWEEN RIB 1 AND RIB 8, INCLUDING RUNOUTS
AND AIR TRANSFER HOLES AND BUTT STRAP, AT STRINGER
11, EXCLUDING THE AREA INSIDE THE DRY BAY
NOTE 1: 100% LIMIT = 41800 CY OR 60000 FH
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540AB 540AZ 540BB 540BZ 640AB 640AZ 640BB
640BZ
Skills :
AF 2 6.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572020-01-5
AMM 572000/6
AMT 572000-200-010
T 60 000 FH
T 33 000 CY
I 22 800 FH
I 11 800 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
572020-01-6 OUTER WING TOP SKIN RIB 1 AND 8 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, TOP SKIN
STRINGERS, BETWEEN RIB 1 AND RIB 8, INCLUDING RUNOUTS
AND AIR TRANSFER HOLES AND BUTT STRAP, AT STRINGER
11, EXCLUDING THE AREA INSIDE THE DRY BAY
Access panels :
540AB 540AZ 540BB 540BZ 640AB 640AZ 640BB
640BZ
Skills :
AF 2 6.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572032-01-2
AMM 572000/6
AMT 572000-200-020
T 42 000 FH
T 24 000 CY
I 11 800 FH
I 6 800 CY
ALL 572032-01-2 OUTER WING BOTTOM SKIN/REAR SPAR 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN LOWER
SURFACE AT ATTACHMENT TO REAR SPAR, BETWEEN RIB 1 AND
RIB 8, EXCLUDING AREAS COVERED BY MLG REINFORCING
PLATE, FLAP TRACK 2 FAIRING AND PYLON FAIRING
ALI 572034-01-3
AMM 572000/6
AMT 572000-210-003
T 53 000 FH
T 32 700 CY
I 16 600 FH
I 10 200 CY
ALL 572034-01-3 OUTER WING BOTTOM SKIN LDG PLATE 500 GVI
600
Y
GENERAL VISUAL INSPECTION OF OUTER WING, BOTTOM SKIN
LOWER SURFACE MLG REINFORCING PLATE
Skills :
AF 1 0.40 MHrs
ALI 572036-01-3
AMM 572000/6
AMT 572000-200-022
MRB 572036-01-3
T 42 000 FH
T 24 000 CY
I 18 400 FH
I 10 600 CY
ALL 572036-01-3 OUTER WING BOTTOM SKIN FLAP TRACK 2 531 DI
631
Y
SURFACE, FORWARD OF REAR SPAR IN AREA COVERED BY FLAP
TRACK 2 FAIRINGS, INCLUDING ATTACHMENT TO REAR SPAR
NOTE : SAMPLING 20%
NOTE : 100% THRESHOLD = 35800 FC OR 60000 FH
Access panels :
531CB 531EB 631CB 631EB
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572038-01-2
AMM 572000/6
AMT 572000-200-023
T 41 700 FH
T 24 000 CY
I 7 200 FH
I 4 100 CY
ALL 572038-01-2 OUTER WING BOTTOM SKIN RUNOUTS 500 DI
600
Y
SURFACE AT RUNOUTS OF STRINGER 2 (RIB BAY 5-6),
STRINGER 9 (RIB BAYS 2-3 AND 6-7), STRINGER 10
(RIB BAYS 2-3 AND 6-7), STRINGER 14 (RIB BAY 3-4) AND
STRINGER 15 (RIB BAY 2-3)
Skills :
AF 1 0.06 MHrs
ALI 572041-02-10
AMT 572000-220-802
MRB 572041-02-10
T 48 700 FH
T 30 000 CY
I 7 900 FH
I 4 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
572041-02-10 OUTER WING 500 DI
600
N
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN, LOWER
SURFACE AT ATTACHMENT TO RIBS AND STRINGERS
(EXCLUDING STRINGERS 8 AND 11) BETWEEN RIB 1 AND RIB
8 FROM FRONT SPAR TO REAR SPAR EXCLUDING AREAS
COVERED BY FAIRINGS AND REINFORCING PLATES.
NOTE 1: 100% THRESHOLD = 39600 FC OR 60000 FH
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572000-220-802 T 48 700 FH
T 30 000 CY
I 7 900 FH
I 4 900 CY
2255
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5241
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572041-02-9 OUTER WING 500 DI
600
N R
SURFACE AT ATTACHMENT TO RIBS AND STRINGERS
(EXCLUDING STRINGERS 8 AND 11) BETWEEN RIB 1 AND RIB
8 FROM FRONT SPAR TO REAR SPAR EXCLUDING AREAS
COVERED BY FAIRINGS AND REINFORCING PLATES.
NOTE 1 : 100% LIMIT THRESHOLD = 42400 FC OR 60000 FH
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572042-01-4
AMM 572000/6
AMT 572000-210-005
T 42 000 FH
T 24 000 CY
I 6 500 FH
I 4 000 CY
ALL 572042-01-4 OUTER WING BOTTOM SKIN LOWER SURFACE 471 GVI
481
Y
LOWER SURFACE AT ATTACHMENT TO RIBS AND STRINGERS, IN
AREA COVERED BY PYLON FAIRING
PREP. : PYLON FAIRINGS REMOVED
Skills :
AF 1 0.10 MHrs
ALI 572044-01-5
AMM 572000/6
AMT 572000-210-004
T 47 100 FH
T 29 000 CY
I 7 500 FH
I 4 600 CY
600
Y
LOWER SURFACE SPANWISE SKIN JOINTS AT STRINGER 8 AND
STRINGER 11, BETWEEN RIB 1 AND RIB 8, EXCLUDING AREAS
COVERED BY REINFORCING PLATES AND FAIRINGS
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572050-01-5
AMT 572000-200-034
T 51 400 FH
T 28 700 CY
I 22 000 FH
I 12 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572050-01-5 OUTER WING, DRY BAY AREA 540 DI
640
Y R
DETAILED INSPECTION OF OUTER WING, DRY BAY AREA
NOTE 1:
- THIS TASK IS AN ALTERNATIVE TO TASK 572050-02-5.
- IF AN A/C HAS ALREADY EXCEEDED THE INSPECTION
THRESHOLD OF THIS TASK, THE INSPECTION SHOULD BE
PERFORMED AT THE NEXT DUE OF ANY APPLICABLE TASKS OF
SSI 572004 OR 572020 OR 572027 OR 572053. FROM THAT
TIME ONWARDS, APPLY THE INSPECTION INTERVAL OF THIS
TASK.
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540AB 540BB 540CZ 540DZ 640AB 640BB 640CZ
640DZ
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572050-01-5
AMT 572000-200-034
T 51 400 FH
T 28 700 CY
I 22 000 FH
I 11 800 CY
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572050-01-6 OUTER WING, DRY BAY AREA 540 DI
640
Y R
DETAILED INSPECTION OF OUTER WING, DRY BAY AREA
NOTE 1:
TASK.
Access panels :
540AB 540BB 540CZ 540DZ 640AB 640BB 640CZ
640DZ
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572050-02-5
AMT 572000-220-011
MRB 572050-02-5
NTM 57-20-50
T 42 000 FH
T 24 000 CY
I 22 000 FH
I 12 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572050-02-5 OUTER WING, DRY BAY AREA 521 SDI
621
Y R
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF OUTER
WING, DRY BAY AREA
NOTE 1:
TASK.
NOTE 2: 100% THRESHOLD 28700 FC OR 51400 FH
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
521AZ 521BZ 521EB 621AZ 621BZ 621EB
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572050-02-6
AMT 572000-220-011
NTM 57-20-50
T 51 400 FH
T 28 700 CY
I 22 000 FH
I 11 800 CY
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572050-02-6 OUTER WING, DRY BAY AREA 521 SDI
621
Y R
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF OUTER
WING, DRY BAY AREA
NOTE 1:
TASK.
Access panels :
521AZ 521BZ 521EB 621AZ 621BZ 621EB
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572053-01-3
AMM 572000/6
AMT 572000-200-026
T 51 400 FH
T 28 700 CY
I 22 000 FH
I 12 300 CY
ALL 572053-01-3 OUTER WING BOTTOM SKIN STRINGERS 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN
STRINGERS, BETWEEN RIB 1 AND RIB 8, INCLUDING DRAIN
HOLES IN STRINGERS AND BUTT STRAP AT STRINGER 8 AND
STRINGER 11, EXCLUDING THE AREA INSIDE THE DRY BAY
Access panels :
540AB 540AZ 540BB 540BZ 540CB 640AB 640AZ
640BB 640BZ 640CB
ALI 572111-01-3
AMM 572100/6
AMT 572100-200-002
MRB 572111-01-3
T 42 000 FH
T 24 000 CY
T 12 YE
I 23 000 FH
I 14 000 CY
I 6 YE
ALL 572111-01-3 OUTER WING REAR SPAR AFT FACE RIB 8-11 574 DI
575
674
675
Y
FACE, FROM RIB 8 TO RIB 11
NOTE : CPCP
Access panels :
573CB 573EB 573FB 575AB 673CB 673EB 673FB
675AB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572112-01-3
AMM 572100/6
AMT 572100-200-003
MRB 572112-01-3
T 42 000 FH
T 24 000 CY
T 12 YE
I 26 700 FH
I 15 100 CY
I 6 YE
ALL 572112-01-3 OUTER WING REAR SPAR AFT FACE RIB11-27 575 DI
675
Y
FACE, BETWEEN RIB 11 AND RIB 27, INCLUDING JOINT
PLATE AT RIB 22
NOTE : CPCP
Access panels :
575BB 575CB 575DB 575EB 575FB 575GB 575HB
575JB 575KB 575LB 575MB 675BB 675CB 675DB
675EB 675FB 675GB 675HB 675JB 675KB 675LB
675MB
Skills :
AF 1 1.50 MHrs
ALI 572114-01-5
AMM 572100/6
AMT 572100-200-010
MRB 572114-01-5
T 49 200 FH
T 30 000 CY
I 19 000 FH
I 11 600 CY
ALL 572114-01-5 OUTER WING REAR SPAR FWD FACE RIB 8-11 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, REAR SPAR FORWARD
FACE, BETWEEN RIB 8 AND RIB 11, INCLUDING TOP AND
BOTTOM FLANGES
Access panels :
540CB 540DB 540EB 640CB 640DB 640EB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572115-01-3
AMM 572100/6
AMT 572100-200-011
MRB 572115-01-3
T 48 900 FH
T 30 000 CY
I 20 200 FH
I 12 400 CY
ALL 572115-01-3 OUTER WING REAR SPAR FWD FACE RIB11-27 NT DI Y
FACE, BETWEEN RIB 11 AND RIB 27, INCLUDING JOINT AT
RIB 22 AND TOP AND BOTTOM FLANGES
NOTE 3 : WORKING ZONES: 540, 550, 560
640, 650, 660
Access panels :
540FB 540GB 540HB 540JB 540KB 540LB 540MB
540NB 540PB 540QB 540RB 550AB 550BB 550CB
550DB 560AB 640FB 640GB 640HB 640JB 640KB
640LB 640MB 640NB 640PB 640QB 640RB 650AB
650BB 650CB 650DB 660AB
Skills :
AF 1 0.66 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572129-01-2
AMM 572100/6
AMT 572100-200-015
MRB 572129-01-2
T 52 100 FH
T 30 000 CY
I 11 300 FH
I 6 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572129-01-2 OUTER WING BOTTOM SKIN ATTACH RIB 8-15 500 DI
600
Y R
SURFACE AT ATTACHMENTS TO FRONT SPAR AND REAR SPAR,
BETWEEN RIB 8 AND RIB 15, EXCLUDING AREAS COVERED BY
PYLON REINFORCING, PYLON FAIRING AND FLAP TRACK 3
FAIRING
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572129-01-3
AMM 572100/6
AMT 572100-200-015
T 56 300 FH
T 32 400 CY
I 8 500 FH
I 4 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572129-01-3 OUTER WING BOTTOM SKIN ATTACH RIB 8-15 500 DI
600
Y R
SURFACE AT ATTACHMENTS TO FRONT SPAR AND REAR SPAR,
BETWEEN RIB 8 AND RIB 15, EXCLUDING AREAS COVERED BY
PYLON REINFORCING, PYLON FAIRING AND FLAP TRACK 3
FAIRING
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572130-01-4
AMM 572100/6
AMT 572100-200-016
MRB 572130-01-4
T 52 100 FH
T 30 000 CY
I 11 300 FH
I 6 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572130-01-4 OUTER WING BOTTOM SKIN ATTACH RIB15-22 500 DI
600
Y R
SURFACE AT ATTACHMENT TO FRONT SPAR AND REAR SPAR,
BETWEEN RIB 15 AND RIB 22, EXCLUDING AREA COVERED BY
FLAP TRACK 4 FAIRING
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572130-01-5
AMM 572100/6
AMT 572100-200-016
MRB 572130-01-5
T 52 100 FH
T 30 000 CY
I 11 300 FH
I 6 500 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572130-01-5 OUTER WING BOTTOM SKIN ATTACH RIB15-22 500 DI
600
Y R
BETWEEN RIB 15 AND RIB 22, EXCLUDING AREA COVERED BY
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572137-01-3
AMM 572100/6
AMT 572100-200-019
T 42 000 FH
T 24 000 CY
I 8 200 FH
I 4 900 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572137-01-3 OUTER WING BOTTOM SKIN RUNOUTS 500 DI
600
Y R
SURFACE AT RUNOUT OF STRINGER 4 (RIB BAY 10-11),
STRINGER 5 (RIB BAY 13-14), STRINGER 13 (RIB BAY
8-9), STRINGER 6 (RIB BAY 16-17), STRINGER 7 (RIB BAY
19-20) AND STRINGER 12 (RIB BAY 17-18)
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.24 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572137-01-5
AMM 572100/6
AMT 572100-200-019
T 42 000 FH
T 24 000 CY
I 7 600 FH
I 4 500 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572137-01-5 OUTER WING BOTTOM SKIN RUNOUTS 500 DI
600
Y R
SURFACE AT RUNOUT OF STRINGER 4 (RIB BAY 10-11),
STRINGER 5 (RIB BAY 13-14), STRINGER 13 (RIB BAY
8-9), STRINGER 6 (RIB BAY 16-17), STRINGER 7 (RIB BAY
19-20) AND STRINGER 12 (RIB BAY 17-18)
Skills :
AF 1 0.24 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572142-01-3
AMM 572100/6
AMT 572100-210-002
T 42 000 FH
T 24 000 CY
I 6 800 FH
I 4 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572142-01-3 OUTER WING BOTTOM SKIN CUTOUTS 500 GVI
600
Y R
LOWER SURFACE AT ATTACHMENT TO RIBS AND STRINGERS,
BETWEEN RIB 8 AND RIB 15, FROM FRONT SPAR TO REAR
SPAR, EXCLUDING AREAS COVERED BY PYLON FAIRING AND
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.24 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572142-01-5
AMM 572100/6
AMT 572100-210-002
T 60 000 FH
T 42 700 CY
I 6 800 FH
I 4 000 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572142-01-5 OUTER WING BOTTOM SKIN CUTOUTS 500 GVI
600
Y R
LOWER SURFACE AT ATTACHMENT TO RIBS AND STRINGERS,
BETWEEN RIB 8 AND RIB 15, FROM FRONT SPAR TO REAR
SPAR, EXCLUDING AREAS COVERED BY PYLON FAIRING AND
Skills :
AF 1 0.24 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572143-01-3
AMM 572100/6
AMT 572100-200-022
MRB 572143-01-3
T 51 000 FH
T 30 000 CY
I 16 600 FH
I 9 800 CY
ALL 572143-01-3 OUTER WING BOTTOM SKIN RIB/STGR ATTACH 532 DI
533
632
633
Y
SURFACE AT ATTACHMENT TO RIBS AND STRINGERS IN AREA
COVERED BY FLAP TRACK 3 FAIRING AND FLAP TRACK 4
FAIRING.
NOTE 2 : 100% THRESHOLD = 39200 FC OR 60000 FH
Access panels :
532CB 532EB 533CB 533EB 632CB 632EB 633CB
633EB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572148-01-5
AMM 572100/6
AMT 572100-210-003
T 39 000 FH
T 24 000 CY
I 7 300 FH
I 4 500 CY
2255
2261
2267
2303
2480
2974
3600
3737
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
572148-01-5 OUTER WING BOTTOM SKIN RIB/STGR ATTACH 500 GVI
600
Y R
LOWER SURFACE, SPANWISE SKIN JOINTS AT STRINGER 8 AND
STRINGER 11, BETWEEN RIB 8 AND RIB 18, EXCLUDING
AREAS COVERED BY PYLON FAIRING AND BY FLAP TRACK 3
FAIRING
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572148-01-6
AMM 572100/6
AMT 572100-210-003
T 39 000 FH
T 24 000 CY
I 6 100 FH
I 3 700 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
600
Y R
GENERAL VISUAL INSPECTION OF OUTER WING, BOTTOM SKIN LOWER SURFACE,
SPANWISE SKIN JOINTS AT STRINGER 8 AND STRINGER 11, BETWEEN RIB 8 AND RIB
18, EXCLUDING AREAS COVERED BY PYLON FAIRING AND BY FLAP TRACK 3 FAIRING
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572149-01-5
AMM 572100/6
AMT 572100-210-004
T 52 300 FH
T 32 200 CY
I 8 600 FH
I 5 300 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
600
Y R
LOWER SURFACE, SPANWISE SKIN JOINTS AT STRINGER 8 AND
STRINGER 11, BETWEEN RIB 18 AND RIB 21, ADJACENT TO
FRONT SPAR AND REAR SPAR, EXCLUDING AREAS COVERED BY
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572149-01-6
AMM 572100/6
AMT 572100-210-004
T 53 300 FH
T 32 200 CY
I 6 100 FH
I 3 700 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
600
Y R
OUTER WING BOTTOM SKIN RIB/STGR ATTACH
GENERAL VISUAL INSPECTION OF OUTER WING, BOTTOM SKIN LOWER SURFACE,
SPANWISE SKIN JOINTS AT STRINGER 8 AND STRINGER 11, BETWEEN RIB 18 AND RIB
21, ADJACENT TO FRONT SPAR AND REAR SPAR, EXCLUDING AREA COVERED BY FLAP
TRACK 4 FAIRING
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572150-01-4
AMM 572100/6
AMT 572100-200-023
T 42 000 FH
T 24 000 CY
I 16 000 FH
I 9 400 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572150-01-4 OUTER WING BOTTOM SKIN JOINTS RIB11-13 532 DI
632
Y R
SURFACE, SPANWISE SKIN JOINTS AT STRINGER 8 AND
STRINGER 11, BETWEEN RIB 11 AND RIB 13 IN AREAS
COVERED BY FLAP TRACK 3 FAIRING
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
532CB 532EB 632CB 632EB
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572150-01-5
AMM 572100/6
AMT 572100-200-023
T 40 700 FH
T 24 000 CY
I 8 300 FH
I 4 800 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
632
Y R
SURFACE, SPANWISE SKIN JOINTS AT STRINGER 8 AND
STRINGER 11, BETWEEN RIB 11 AND RIB 13 IN AREAS
COVERED BY FLAP TRACK 3 FAIRING
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572155-01-3
AMM 572100/6
AMT 572100-200-026
T 58 100 FH
T 30 500 CY
I 29 600 FH
I 15 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572155-01-3 OUTER WING BOTTOM SKIN RIB 8-21 540 DI
640
Y R
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN UPPER
SURFACE BUTT STRAPS AT STRINGER 8 AND STRINGER 11,
BETWEEN RIB 8 AND RIB 21
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540CB 540DB 540EB 540FB 540GB 540HB 540JB
540KB 540LB 540MB 540NB 540PB 540QB 640CB
640DB 640EB 640FB 640GB 640HB 640JB 640KB
640LB 640MB 640NB 640PB 640QB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572155-01-4
AMM 572100/6
AMT 572100-200-026
T 42 000 FH
T 22 800 CY
I 18 800 FH
I 9 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572155-01-4 OUTER WING BOTTOM SKIN RIB 8-21 540 DI
640
Y R
SURFACE BUTT STRAPS AT STRINGER 8 AND STRINGER 11,
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540CB 540DB 540EB 540FB 540GB 540HB 540JB
540KB 540LB 540MB 540NB 540PB 540QB 640CB
640DB 640EB 640FB 640GB 640HB 640JB 640KB
640LB 640MB 640NB 640PB 640QB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572158-01-4
AMM 572100/6
AMT 572100-200-028
T 42 000 FH
T 24 000 CY
I 19 800 FH
I 9 800 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
572158-01-4 OUTER WING BOTTOM SKIN STGR RIB 8-18 540 DI
640
Y R
STRINGERS (INCLUDING DRAIN HOLES), BETWEEN RIB 8 AND
RIB 18, COMPRISING STRINGERS 4,5,6,7,8,11,12 & 13
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540CB 540DB 540EB 540FB 540GB 540HB 540JB
540KB 540LB 540MB 640CB 640DB 640EB 640FB
640GB 640HB 640JB 640KB 640LB 640MB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 572158-01-8
AMM 572100/6
AMT 572100-200-028
T 57 900 FH
T 28 600 CY
I 44 100 FH
I 21 800 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572158-01-8 OUTER WING BOTTOM SKIN STGR RIB 8-18 540 DI
640
Y R
STRINGERS (INCLUDING DRAIN HOLES), BETWEEN RIB 8 AND
RIB 18, COMPRISING STRINGERS 4,5,6,7,8,11,12 & 13
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 2.00 MHrs
ALI 572160-01-3
AMM 572100/6
AMT 572100-200-029
T 42 000 FH
T 24 000 CY
I 27 800 FH
I 16 100 CY
ALL 572160-01-3 OUTER WING BOTTOM SKIN STGR RIB 18-27 540 DI
550
560
640
650
660
Y
DETAILED INSPECTION OF OUTER WING BOTTOM
SKIN STRINGERS BETWEEN RIB 18 AND RIB 27
COMPRISING STRINGERS 7, 8 AND 11
Access panels :
540NB 540PB 540QB 540RB 550AB 550BB 550CB
550DB 560AB 640NB 640PB 640QB 640RB 650AB
650BB 650CB 650DB 660AB
Skills :
AF 1 4.02 MHrs
ALI 575158-01-2
AMM 575100/6
AMT 575100-210-003
T 42 000 FH
T 24 000 CY
I 8 800 FH
I 5 200 CY
600
Y
LOWER SURFACE, AFT OF REAR SPAR BETWEEN RIB 1 AND RIB
9, EXCLUDING AREAS COVERED BY FLAP TRACK 2 FAIRINGS
AND PYLON FAIRINGS
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575159-01-2
AMM 575100/6
AMT 575100-200-007
T 34 900 FH
T 21 800 CY
I 12 500 FH
I 7 800 CY
ALL 575159-01-2 OUTER WING BOTTOM SKIN/REAR SPAR 500 DI
600
Y
SURFACE, CURVED SKIN EDGE AFT OF REAR SPAR JUST
INBOARD OF MLG SUPPORT RIB 5
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575160-01-3
AMM 575100/6
AMT 575100-200-008
NTM 57-51-60
T 42 000 FH
T 24 000 CY
I 19 100 FH
I 11 900 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
575160-01-3 TRAILING EDGE BOTTOM SKIN REAR SPAR 574 SDI
674
Y R
SPECIAL DETAILED INSPECTION (X-RAY AND HFEC) OF OUTER
WING, TRAILING EDGE BOTTOM SKIN AFT OF REAR SPAR,
ABOVE MLG REINFORCING
PREP. : MLG SECONDARY HINGED FAIRING
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
574AB 674AB
Skills :
NDT 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575160-01-4
AMM 575100/6
AMT 575100-200-008
NTM 57-51-60
T 42 000 FH
T 24 000 CY
I 16 900 FH
I 10 600 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
575160-01-4 TRAILING EDGE BOTTOM SKIN REAR SPAR 574 SDI
674
Y R
SPECIAL DETAILED INSPECTION (X-RAY AND HFEC) OF OUTER
WING, TRAILING EDGE BOTTOM SKIN AFT OF REAR SPAR,
ABOVE MLG REINFORCING
PREP. : MLG SECONDARY HINGED FAIRING
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
574AB 674AB
Skills :
NDT 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575161-01-2
AMM 575100/6
AMT 575100-210-004
T 42 000 FH
T 24 000 CY
I 6 700 FH
I 4 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
575161-01-2 TRAILING EDGE BOTTOM SKIN REAR SPAR 500 GVI
600
Y R
GENERAL VISUAL INSPECTION OF OUTER WING, TRAILING
EDGE BOTTOM SKIN LOWER SURFACE, AFT OF REAR SPAR FROM
RIB 9 TO RIB 12, INCLUDING JACKING FITTING HOLE AT
RIB 9 AND SIGHTING ROD HOLE AT RIB 10
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575161-01-3
AMM 575100/6
AMT 575100-210-004
T 42 000 FH
T 24 000 CY
I 6 100 FH
I 3 600 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
575161-01-3 TRAILING EDGE BOTTOM SKIN REAR SPAR 500 GVI
600
Y R
GENERAL VISUAL INSPECTION OF OUTER WING, TRAILING
EDGE BOTTOM SKIN LOWER SURFACE, AFT OF REAR SPAR FROM
RIB 9 TO RIB 12, INCLUDING JACKING FITTING HOLE AT
RIB 9 AND SIGHTING ROD HOLE AT RIB 10
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575163-01-3
AMM 575100/6
AMT 575100-220-011
MRB 575163-01-3
NTM 57-51-63
T 46 500 FH
T 30 000 CY
I 5 500 FH
I 3 600 CY
ALL 575163-01-3 OUTER WING BOTTOM SKIN UND PYLON FAIR 574 SDI
674
Y
SPECIAL DETAILED INSPECTION (LFEC) OF OUTER WING,
BOTTOM SKIN LOWER SURFACE, AFT OF REAR SPAR, UNDER
PYLON FAIRING
PREP. : PYLON FAIRINGS REMOVED;
Skills :
NDT 1 1.00 MHrs
ALI 575164-01-4
AMM 575100/6
AMT 575100-220-012
NTM 57-51-64
T 42 000 FH
T 24 000 CY
I 6 400 FH
I 3 900 CY
ALL 575164-01-4 OUTER WING BOTTOM SKIN UND FLAP TRACK2 531 SDI
574
631
674
Y
SPECIAL DETAILED INSPECTION (HFEC) OF OUTER WING,
BOTTOM SKIN LOWER SURFACE, AFT OF REAR SPAR, AROUND
FLAP TRACK 2 FORWARD FITTINGS
Access panels :
531CB 531EB 631CB 631EB
Skills :
NDT 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 575165-01-2
AMM 575100/6
AMT 575100-200-009
MRB 575165-01-2
T 52 500 FH
T 30 000 CY
I 21 100 FH
I 12 700 CY
ALL 575165-01-2 OUTER WING BOTTOM SKIN UND FLAP 2 FAIR 531 DI
574
631
674
Y
SURFACE, AFT OF REAR SPAR, UNDER FLAP TRACK 2 FAIRING
AND FLAP TAB DRIVE 1A FAIRING
Access panels :
531EB 535AB 535BB 631EB 635AB 635BB
Skills :
AF 1 0.40 MHrs
ALI 575221-01-1
AMM 575200/6
AMT 575200-210-009
T 4 800 CY
I 4 800 CY
ALL 575221-01-1 INBOARD FLAP END RIB 500 GVI
600
Y
GENERAL VISUAL INSPECTION OF INBOARD DOUBLE-SLOTTED
FLAP, EXTERNAL SURFACE OF UPPER AND LOWER SKIN, LH/RH
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
ALI 575321-01-2
AMM 575300/6
AMT 575300-210-009
T 8 500 CY
I 8 500 CY
ALL 575321-01-2 OUTBOARD DOUBLE SLOTTED FLAP TAB 500 GVI
600
Y
GENERAL VISUAL INSPECTION OF OUTBOARD DOUBLE-SLOTTED
FLAP, INCLUDING TAB, EXTERNAL SURFACE OF UPPER AND
LOWER SKIN, LH/RH
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
ALI 576103-01-1
AMM 576000/6
AMT 576000-200-002
MRB 576103-01-1
T 30 000 CY
T 12 YE
I 15 800 CY
I 12 YE
ALL 576103-01-1 AILERON HINGE AND ACTUATOR FITTINGS 575 DI
675
Y
DETAILED INSPECTION OF AILERON, HINGE FITTINGS AND
ACTUATOR ATTACHMENT FITTINGS
NOTE 1: 100% THRESHOLD = 12YE OR 38700 FC
NOTE 3: CPCP
Access panels :
575AT 575KB 575LB 575MB 675AT 675KB 675LB
675MB
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 71 POWER PLANT - GENERAL
Task
code
Threshold
Interval
Ctrl References Eff
ALI 711300-03-1
AMT 711300-210-010
T 3 000 CY
I 3 000 CY
ALL 711300-03-1 FAN COWL DOOR HINGE FITTING 437 GVI
438
447
448
Y
GENERAL VISUAL INSPECTION OF FAN COWL DOOR HINGE
FITTINGS
Skills :
B2 1 0.00 MHrs
ALI 712111-03-2
AMM 712112/6
AMT 712112-200-010
T 9 000 FH
T 4 500 CY
I 9 000 FH
I 4 500 CY
ALL 712111-03-2 FORWARD ENGINE MOUNT 435 DI
436
445
446
451
461
Y
DETAILED INSPECTION OF FORWARD ENGINE MOUNT
INSTALLATION
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 712112-200-802 T 15 000 FH
T 7 500 CY
I 15 000 FH
I 7 500 CY
ALL 712111-06-1 FORWARD ENGINE MOUNT 450 SDI
460
N
SPECIAL DETAILED INSPECTION (TC) OF FWD ENGINE MOUNT
PYLON BOLTS.
NOTE: IN CASE TASK THRESHOLD IS OVER DUE WHEN APPLYING CHANGES OF
AMSS ISS 13 AMD 00, THE FIRST TIME OF TASK ACCOMPLISHMENT IS AT 2500 FC OR
5000 FH SINCE 04/04/2012.
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
ALI 712112-02-1
AMM 712112-200-805
T 15 000 FH
T 7 500 CY
I 15 000 FH
I 7 500 CY
ALL 712112-02-1 FORWARD ENGINE MOUNT 450 SDI
460
N
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF FORWARD
ENGINE MOUNT LINK LUGS.
5000 FH SINCE 04/04/2012.
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 712211/6
AMT 712211-200-010
T 15 000 FH
T 7 500 CY
I 15 000 FH
I 7 500 CY
ALL 712211-04-1 AFT ENGINE MOUNT 451 DI
453
454
461
463
464
Y
DETAILED INSPECTION OF AFT ENGINE MOUNT INSTALLATION
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
EN 1 0.60 MHrs
AMT 712211-200-802 T 15 000 FH
T 7 500 CY
I 15 000 FH
I 7 500 CY
ALL 712211-06-1 AFT ENGINE MOUNT 450 SDI
460
N
SPECIAL DETAILED INSPECTION (TC) OF AFT ENGINE MOUNT
PYLON BOLTS
5000 FH SINCE 04/04/2012.
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 712212-02-1
AMT 712211-200-803
T 15 000 FH
T 7 500 CY
I 15 000 FH
I 7 500 CY
ALL 712212-02-1 AFT ENGINE MOUNT 450 SDI
460
N
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF AFT ENGINE
MOUNT LINK LUGS
5000 FH SINCE 04/04/2012.
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
ALI 712213-02-1
AMM 712211-200-804
T 15 000 FH
T 7 500 CY
I 15 000 FH
I 7 500 CY
460
N
DETAILED INSPECTION OF AFT ENGINE MOUNT PINS
5000 FH SINCE 04/04/2012.
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 78 ENGINE EXHAUST
Task
code
Threshold
Interval
Ctrl References Eff
ALI 783200-03-1
AMM 783200/6
AMT 783200-200-011
T 3 000 CY
I 3 000 CY
ALL 783200-03-1 "C" DUCT HINGE FITTING 451 GVI
452
461
462
N
GENERAL VISUAL INSPECTION OF "C" DUCT HINGE FITTINGS
Access panels :
451AL 452AR 461AL 462AR
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES - CMR Page : 1

LEP R 1 SEP 2013

CHAPTER : 21 AIR CONDITIONING / PRESSURIZATION
Task
code
Threshold
Interval
Ctrl References Eff
AMM 213100/5
AMT 213100-720-001
CMR 213100-00001-1-C
CMR 213100-00001-2-C
CMR 213100-00001-3-C
MRB 213100/06
I 24 000 FH
I 80 MO
ALL 213100-05-1 PRESSURE CONTROL AND MONITORING 210 FNT N
PRESSURE CONTROL AND MONITORING
FUNCTIONAL CHECK OF POSITIVE/NEGATIVE DELTA "P"
PROTECTION OF THE SAFETY VALVES.
NOTE:
- THE FUNCTIONAL CHECK MAY ALTERNATIVELY BE ACCOMPLISHED AS AN OFF AIRCRAFT
TASK.
- THE CHECK OF POSITION INDICATION OF SAFETY VALVES IS PART OF THIS TASK
AFTER THE FUNCTIONAL CHECK/RE-INSTALLION.
PREP: ACCESS THROUGH REAR GALLEY WALL REQUIRED;
Access panels :
312AR
Skills :
AF 2 1.66 MHrs
Amendment No Issue No Page CMR - 21 [1 / 1] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 24 ELECTRICAL POWER
Task
code
Threshold
Interval
Ctrl References Eff
AMM 242800/5
AMT 242800-710-001
MRB 242000/17
MRB 243000/10
MRB 245000/08
I 750 FH
I 6 MO
ALL 242800-01-2 STATIC INVERTER 210 OPT N
OPERATIONAL CHECK OF STATIC INVERTER CMR**
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 26 FIRE PROTECTION
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262300/5
AMT 262300-720-001
MRB 26.23.00/03
I 12 000 FH
I 80 MO
ALL 262300-02-3 CARGO COMPARTMENT FIRE EXTINGUISHING 132 OPT N
CHECK FIRING CIRCUIT CONTINUITY. CMR**
NOTE: CREDIT CAN BE TAKEN FROM DELETED TASK 262300-02-1
Access panels :
132MW 825
Skills :
B2 1 0.00 MHrs
EL 2 0.40 MHrs
AMM 262300/6
AMT 262300-200-001
MRB 262300/04
I 18 000 FH
I 120 MO
ALL 262300-03-3 CARGO COMPARTMENT FIRE EXTINGUISHING 132 FUC N
CHECK FIRE EXTINGUISHER LINES FOR LEAKAGE AND CMR**
OBSTRUCTION
Access panels :
132MW 825
Skills :
CA 2 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 27 FLIGHT CONTROLS - GENERAL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 279600/5
AMT 279600-710-007
MRB 271400/01
I 4 000 FH
I 36 MO
ALL 271400-01-1 AILERON AND HYDRAULIC ACTUATION 210 OPT N
OPERATIONAL CHECK OF DAMPING MEASUREMENT BY BITE CMR**
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 271400/6
AMT 271400-220-002
MRB 271400/02
I 15 000 FH
I 100 MO
ALL 271400-03-1 AILERON AND HYDRAULIC ACTUATION 575 OPC
675
Y
CHECK AILERON SERVO CONTROLS FLUID RESERVE CMR**
PISTON POSITION WITH HYDRAULIC RESERVOIR
DEPRESSURIZED
Access panels :
575KB 675KB
Skills :
AF 1 0.40 MHrs
AMM 279600/5
AMT 279600-710-008
MRB 273400/01
I 4 000 FH
I 36 MO
ALL 273400-01-1 ELEVATOR AND HYDRAULIC ACTUATION 210 OPT N
OPERATIONAL CHECK OF DAMPING MEASUREMENT BY BITE CMR**
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 273400/6
AMT 273400-220-001
MRB 273400/02
I 15 000 FH
I 100 MO
ALL 273400-03-1 ELEVATOR AND HYDRAULIC ACTUATION 334 OPC
344
Y
CHECK FLUID RESERVE PISTON POSITION WITH HYDRAULIC CMR**
RESERVOIR DEPRESSURIZED.
Access panels :
334DB 344DB
Skills :
AF 1 0.40 MHrs
AMM 274400/5
AMT 274400-710-002
MRB 274000/01
I 750 FH
ALL 274000-02-1 TRIMMABLE HORIZONTAL STABILIZER 210 OPT N
OPERATIONAL CHECK OF THS ACTUATOR WITH INDIVIDUAL CMR**
HYDRAULIC SYSTEMS
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 274400/5
AMT 274400-710-001
MRB 274000/02
I 4 000 FH
I 80 MO
OPERATIONAL CHECK OF THS ACTUATOR JAMMING PROTECTION CMR**
DEVICE
Access panels :
312AR
Skills :
AF 2 1.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274451/6
AMT 274451-280-001
MRB 274000/16
I 12 000 FH
I 80 MO
ALL 274451-08-1 THS ACTUATOR 310 CHK N
CHECK INTEGRITY OF THS ACTUATOR BALL SCREW SHAFT CMR*
(PRIMARY AND SECONDARY LOAD PATH)
Access panels :
312AR
Skills :
AF 1 0.10 MHrs
AMM 275100/5
AMT 275100-710-001
MRB 275000/04
MRB 275001/04
I 7 500 FH
I 50 MO
ALL 275100-01-2 FLAPS 210 OPT N
OPERATIONAL CHECK OF WTB/POB CMR**
NOTE : FLAP SURFACES MOVE AUTOMATICALLY
Access panels :
575DB 575EB 575FB 675DB 675EB 675FB
Skills :
AF 2 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 275400/6
AMT 275400-210-002
MRB 275000/04
MRB 275001/04
I 7 500 FH
I 50 MO
ALL 275100-03-1 FLAPS 575 DI
675
Y
CHECK OF FLAPS TRANSMISSION SHAFTING INTEGRITY, CMR**
INCLUDING INSPECTION OF SEAL WITNESS DRAINS.
Access panels :
571AB 573AB 573BB 573CB 575AB 575BB 575CB
575DB 575EB 575FB 575GB 671AB 673AB 673BB
673CB 675AB 675BB 675CB 675DB 675EB 675FB
675GB 734 744
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
AMM 278100/5
AMT 278100-710-001
MRB 27.80.00/04
I 7 500 FH
I 48 MO
ALL 278100-03-1 SLATS 520 OPT
620
N
OPERATIONAL CHECK OF WTB/POB CMR**
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 278400-210-002
MRB 27.80.00/04
I 7 500 FH
I 48 MO
ALL 278100-04-1 SLATS 520 DI
620
N
CHECK OF SLATS TRANSMISSION SHAFTING INTEGRITY, CMR**
INCLUDING INSPECTION OF SEAL WITNESS DRAINS
NOTE: CREDIT CAN BE GIVEN FOR PREVIOUS ACCOMPLISHMENT
OF TASK 278100-03-1
Access panels :
191EB 191KB 192EB 192KB 521AT 521CB 521EB
521GB 521HB 522AB 522CB 522EB 522FB 522LB
522NB 522QB 522SB 522UB 621AT 621CB 621EB
621GB 621HB 622AB 622CB 622EB 622FB 622LB
622NB 622QB 622SB 622UB 734 744
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 279600/5
AMT 279600-710-018
MRB 27.90.00/02
MRB 27.90.00/05
I 400 FH
I 80 DY
ALL 279000-05-1 ELECTRICAL FLIGHT CONTROL SYSTEM 210 OPT B2
OPERATIONAL CHECK : CMR*
- OF LOGICS ACTIVATING ELAC 1, ELAC 2, AND SEC.1
STANDBY POWER SUPPLIES
- TO CONFIRM ABILITY OF SEC.1 AND SEC.2 TO ACHIEVE
PITCH CONTROL
- TO CONFIRM ABILITY OF SIDESTICK PRIORITY FUNCTION
Skills :
AV 2 0.80 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 29 HYDRAULIC POWER
Task
code
Threshold
Interval
Ctrl References Eff
AMM 291000/6
AMT 291000-220-002
MRB 29.10.00/05
MRB 29.10.00/12
I 7 500 FH
I 50 MO
ALL 291900-02-1 GROUND INTERNAL LEAK TEST BLUE SYSTEM 210 FNT Y
FUNCTIONAL CHECK TO MONITOR INTERNAL LEAK RATE OF CMR*
BLUE HYDRAULIC SYSTEM
Skills :
AF 2 0.40 MHrs
B2 1 0.00 MHrs
AMM 292200/5
AMT 292200-720-003
MRB 24.50.00/10
MRB 29.10.00/29
I 3 600 FH
I 18 MO
ALL 292000-04-1 AUXILIARY HYDRAULIC POWER 190 FUC Y
OPERATIONAL CHECK OF RAT MANUAL DEPLOYMENT AND CMR*
FUNCTIONAL CHECK OF RAT USING GROUND TEST UNIT,
FOLLOWED BY CHECK OF FILTER INDICATOR
Access panels :
195BB 197EB
Skills :
AF 2 2.00 MHrs
AMM 292200/5
AMT 292200-710-006
MRB 291000/08
I 3 600 FH
I 18 MO
ALL 292000-05-1 AUXILIARY HYDRAULIC POWER 210 OPT N
OPERATIONAL CHECK OF RAM AIR TURBINE (RAT) AUTOMATIC CMR*
DEPLOYMENT.
Access panels :
197EB
Skills :
AF 2 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 292200-220-002
MRB 29.10.00-34
I 3 600 FH
I 18 MO
ALL 292000-09-1 AUXILIARY HYDRAULIC POWER 190 DI N
DETAILED INSPECTION OF RAT BLADES FOR EVIDENCE CMR*
OF PLATING CRACKS
NOTE: THIS TASK IS ONLY APPLICABLE FOR RAT
WITH P/N: 762308
Access panels :
195BB 197EB
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 32 LANDING GEAR
Task
code
Threshold
Interval
Ctrl References Eff
AMM 324300/5
AMT 324300-710-802
MRB 324000/08
I 6 000 FH
I 40 MO
See note
ALL 324300-01-1 ALTERNATE BRAKING SYSTEM 210 OPT N
OPERATIONAL CHECK OF ALTERNATE BRAKING SYSTEM
NOTE: - TASK MAY BE ACCOMPLISHED AT BRAKE CHANGE
- ACCOMPLISHMENT OF THIS TASK WILL ALSO
COVER 324300-01-2 ON AIRCRAFT PRE 26925.
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMT 324300-710-802 I 5 600 FH
I 40 MO
See note
2255
2261
2267
2303
2480
324300-01-2 ALTERNATE BRAKING SYSTEM 210 OPT N
ALTERNATE BRAKING SYSTEM
NOTE: TASK MAY BE ACCOMPLISHED AT BRAKE CHANGE.
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 35 OXYGEN
Task
code
Threshold
Interval
Ctrl References Eff
AMM 352300/5
AMT 352300-710-001
MRB 352000/01
I 8 500 FH
I 80 MO
ALL 352000-01-1 PASSENGER OXYGEN (CHEMICAL) 200 OPT Y
OPERATIONAL CHECK OF MANUAL MASK RELEASE CMR**
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 352300/5
AMT 352300-720-003
MRB 352000/02
I 24 000 FH
I 74 MO
ALL 352000-02-1 PASSENGER OXYGEN (CHEMICAL) 200 FNT N
FUNCTIONAL CHECK OF AUTOMATIC MASK RELEASE, CMR**
DETAILED INSPECTION OF MASKS AND VISUAL CHECK
OF CHEMICAL OXYGEN GENERATORS
Skills :
AF 1 1.40 MHrs
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES - SYS Page : 1

SECTION MVT PAGE DATE
LEP R 1 SEP 2013

CHAPTER : VN VIETNAM AIRLINES
Task
code
Threshold
Interval
Ctrl References Eff
TR Check : ALL VN257000-01 SECURITY BOX 160 CHK N
CARRY OUT A CHECK OF SECURITY BOX FOR
GENERAL CONDITION
AMT 324227-210-003 I 750 FH
I 4 MO
A Check :
ALL VN320000-01 MAIN LDG BRAKES 700 GVI N
INSPECTION/CHECK MAIN LANDING GEAR BRAKES.
CARRY OUT THE WEAR INDICATOR PIN MEASUREMENT AND RECORD.
Skills :
AF 1 0.00 MHrs
B2 1 0.00 MHrs
AMM 313600/2
AMT 313600-740-015
I 1 500 FH
2A Check :
ALL VN491000-01 APU ENGINE - RECORD HOURS & CYCLES 210 CHK N
APU ENGINE - RECORD HOURS & CYCLES
Skills :
B2 1 0.00 MHrs
EN 1 0.05 MHrs
Date ATA VN Date 22/01/2014
Amendment No Issue No Page SYS - VN [1 / 1] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 08 LEVELING / WEIGHING
Task
code
Threshold
Interval
Ctrl References Eff
AMT 081000-200-001 T 4 YE
I 4 YE
ALL 080000-81-1 AIRCRAFT WEIGHING 210 CHK N
CHECK AIRCRAFT WEIGHING
Amendment No Issue No Page SYS - 08 [1 / 1] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 20 STANDARD PRACTICE
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-023
MRB L/HIRF-20-00-01-2
MRB L/HIRF-20-00-01-3
MRB L/HIRF20-00-01-2
MRB L/HIRF20-00-01-3
I 72 MO
ALL 200001-02-1 HIRF/LIGHTNING PROTECTION-WING 511 CHK
520
611
620
N
CHECK THAT THE CONNECTOR IS CORRECTLY TIGHTENED
BY MEASUREMENT OF THE RESISTANCE WITH A LOOP
TESTER:
- 4005VC, 4007VC, 4009VC, 4011VC, LH SIDE
- 4013VC, 4015VC, 4017VC, 4019VC, LH SIDE
- 4006VC, 4008VC, 4010VC, 4012VC, RH SIDE
- 4014VC, 4016VC, 4018VC, 4020VC, RH SIDE
PREP. : SLATS FULLY EXTENDED
Access panels :
521EB 521GB 522AB
Skills :
EL 1 2.00 MHrs
AMM 249200/6
AMT 249200-210-018
MRB L/HIRF-20-00-02-1
I 36 MO
ALL 200002-01-1 HIRF/LIGHTNING PROTECTION-THS T/E 334 GVI
344
N
GENERAL VISUAL INSPECTION OF ELEMENTS FITTED ON
THE FOLLOWING HARNESSES :
- 405VB, 406VB, 407VB, 408VB, 409VB, LH SIDE
- 400VB, 401VB, 402VB, 403VB, 404VB, RH SIDE
Access panels :
334AB 334BB 334CB 334DB 334EB 344AB 344BB
344CB 344DB 344EB
Skills :
B2 1 0.00 MHrs
EL 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-019
MRB L/HIRF-20-00-03-1
I 72 MO
ALL 200003-01-1 HIRF/LIGHTNING PROTECTION-VERTICAL FIN 321 GVI N
- 4202VB, 4204VB
Access panels :
321AL
Skills :
EL 1 0.10 MHrs
AMM 249200/6
AMT 249200-210-020
MRB L/HIRF-20-00-03-2
I 72 MO
- 4202VB, 4204VB
Access panels :
322BL
Skills :
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-021
MRB L/HIRF-20-00-03-3
I 72 MO
- 4202VB, 4204VB
Access panels :
324AT
Skills :
EL 1 0.10 MHrs
AMM 249200/7
AMT 249200-100-004
MRB 20.0.121/01
I 48 MO
ALL 200121-01-1 FORWARD AVIONIC COMPARTMENT 121 RST
122
N
CLEANING OF EWIS INSTALLED IN THE FORWARD AVIONIC
COMPARTMENT (ONLY IF CONTAMINATED)(EWIS)
Access panels :
121AF 121AL 121BF 121CF 122BF 811
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-027
MRB 20.0.121/02
I 48 MO
ALL 200121-02-1 FORWARD AVIONIC COMPARTMENT 121 GVI
122
N
GENERAL VISUAL INSPECTION OF EWIS INSTALLED IN THE
FORWARD AVIONIC COMPARTMENT (EWIS)
Access panels :
121AF 121AL 121BF 121CF 122BF 811
Skills :
EL 1 0.50 MHrs
AMM 249200/6
AMT 249200-210-028
MRB 20.0.121/03
I 72 MO
ALL 200121-03-1 FORWARD AVIONIC COMPARTMENT 121 GVI
122
N
GENERAL VISUAL INSPECTION OF 90, 108, 109 VU
IN THE FORWARD AVIONIC COMPARTMENT (EWIS)
Access panels :
121AL 811 812 822
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-220-005
MRB 20.0.121/04
I 72 MO
ALL 200121-04-1 FORWARD AVIONIC COMPARTMENT 121 DI
122
N
DETAILED INSPECTION OF G, E AND P ROUTES IN THE
FORWARD AVIONIC COMPARTMENT (EWIS)
PREP. : FLOOR PANELS FROM FR 1 TO FR 9 REMOVED;
Access panels :
121AF 121AL 121BF 121CF 122BF 811
Skills :
AF 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-031
MRB 20.0.125/01
I 72 MO
ALL 200125-01-1 LATERAL AVIONIC COMPARTMENT 125 RST
126
N
CLEANING OF EWIS INSTALLED IN THE LATERAL AVIONIC
COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
PREP. : 813 IF INSTALLED;
Access panels :
812 822 824 831
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-808
MRB 20.0.125/03
I 48 MO
ALL 200125-03-1 LATERAL AVIONIC COMPARTMENT 125 GVI
126
N
GENERAL VISUAL INSPECTION OF EWIS INSTALLED
IN THE LATERAL AVIONIC COMPARTMENT (EWIS)
PREP. : 813 IF INSTALLED;
Access panels :
812 822 824 831
Skills :
EL 1 0.50 MHrs
AMM 249200/6
AMT 249200-210-030
MRB 20.0.125/05
I 72 MO
ALL 200125-05-1 LATERAL AVIONIC COMPARTMENT 125 GVI
126
N
GENERAL VISUAL INSPECTION OF 105, 106, 103, 107
AND 70 VUS INSTALLED IN THE LATERAL AVIONIC
COMPARTMENT (EWIS)
PREP. : 103VU;
105VU;
106VU;
107VU;
Access panels :
812 822 831
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-220-008
MRB 20.0.125/06
I 72 MO
ALL 200125-06-1 LATERAL AVIONIC COMPARTMENT 125 DI
126
N
DETAILED INSPECTION OF G, E AND P ROUTES INSTALLED
IN THE LATERAL AVIONIC COMPARTMENT (EWIS)
PREP. : FLOOR PANELS FROM FR 9 TO FR 16 REMOVED;
813 IF INSTALLED;
Access panels :
812 822 824 831
Skills :
AF 1 0.50 MHrs
AMT 249200-100-013
MRB 20.0.127/02
I 72 MO
ALL 200127-02-1 REAR AVIONIC COMPARTMENT 127 RST
128
N
CLEANING OF EWIS INSTALLED IN THE REAR AVIONIC
Access panels :
127BF 127BG 127CF 127DF 128CF 128EG 131AW
131BW 131CW 131DW 132BW 132EW 824 825
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 249200-210-033
MRB 20.0.127/04
I 48 MO
128
N
GENERAL VISUAL INSPECTION OF EWIS INSTALLED IN THE
REAR AVIONIC COMPARTMENT (EWIS)
Access panels :
127BF 127BG 127CF 127DF 128CF 128EG 131AW
131BW 131CW 131DW 132BW 132EW 824 825
Skills :
AF 1 0.50 MHrs
AMM 249200/6
AMT 249200-210-034
MRB 20.0.127/05
I 72 MO
ALL 200127-05-1 REAR AVIONIC COMPARTMENT 127 GVI
128
N
GENERAL VISUAL INSPECTION OF 80, 63, 187, 188 VU
INSTALLED IN THE REAR AVIONIC COMPARTMENT (EWIS)
PREP. : PARTITION WALL PANELS ON FR 24A;
63VU;
Access panels :
824 825
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 249200-220-007
MRB 20.0.127/07
I 72 MO
128
N
DETAILED INSPECTION OF G, E AND P ROUTES INSTALLED
IN THE REAR AVIONIC COMPARTMENT (EWIS)
PREP. : FLOOR PANELS FROM FR 20 TO FR 24;
Access panels :
127BF 127BG 127CF 127DF 128EG 128GF 131AW
131BW 131CW 131DW 132BW 132EW 824 825
Skills :
AF 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-025
MRB 20.0.131/01
I 72 MO
ALL 200131-01-1 FORWARD CARGO COMPARTMENT 131 RST
132
N
CLEANING OF EWIS INSTALLED IN THE FORWARD CARGO
PREP. : SIDEWALL AND CEILING PANELS REMOVED;
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-805
MRB 20.0.131/02
I 144 MO
ALL 200131-02-1 FORWARD CARGO COMPARTMENT 131 GVI
132
N
GENERAL VISUAL INSPECTION OF G, E AND P ROUTES
INSTALLED IN THE FORWARD CARGO COMPARTMENT (EWIS)
PREP. : SIDEWALL AND CEILING PANELS REMOVED;
Access panels :
825
Skills :
AF 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-024
MRB 20.0.133/01
I 72 MO
ALL 200133-01-1 UNDERFLOOR BAY OF FWD CARGO COMPARTMENT 133 RST
134
N
CLEANING OF EWIS INSTALLED IN
THE UNDERFLOOR BAY OF FORWARD CARGO
PREP. : FLOOR PANELS;
Access panels :
133AL 134AR 825
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-029
MRB 20.0.137/01
I 72 MO
ALL 200137-01-1 BAY BEHIND FWD CARGO COMPARTMENT 137 RST
138
N
CLEANING OF EWIS INSTALLED IN THE BAY BEHIND FWD
CARGO COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
PREP. : ACT(S) NO.4 AND NO.6 REMOVED (IF INSTALLED);
Access panels :
131NW 131PW 132PW 825
Skills :
AF 1 0.30 MHrs
AMM 249200/6
AMT 249200-210-026
MRB 20.0.141/01
I 144 MO
ALL 200141-01-1 WING CENTRE BOX 141 GVI
142
N
GENERAL VISUAL INSPECTION OF EXPOSED EWIS
INSTALLED IN THE WING CENTRE BOX (EWIS)
Access panels :
147AZ 148AZ 734 744
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-015
MRB 20.0.145/01
I 72 MO
ALL 200145-01-1 ZONE UNDER CABIN FLOOR 145 RST
146
N
CLEANING OF EWIS INSTALLED IN THE ZONE UNDER CABIN
FLOOR (ONLY IF CONTAMINATED) (EWIS)
Access panels :
832 842
Skills :
AF 1 0.30 MHrs
AMM 249200/7
AMT 249200-100-026
MRB 20.0.151/01
I 72 MO
ALL 200151-01-1 AFT CARGO COMPARTMENT 151 RST
152
N
CLEANING OF EWIS INSTALLED IN THE AFT CARGO
PREP. : SIDEWALL PANELS FROM FR 46 TO FR 59;
ACT(S) REMOVED (IF INSTALLED);
Access panels :
826
Skills :
EL 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-806
MRB 20.0.151/02
I 144 MO
ALL 200151-02-1 AFT CARGO COMPARTMENT 151 GVI
152
N
GENERAL VISUAL INSPECTION OF P ROUTES INSTALLED IN
AFT CARGO COMPARTMENT (EWIS)
PREP. : ACT(S) REMOVED (IF INSTALLED);
CEILING PANELS FROM FR 46 TO FR 59;
SIDEWALL PANELS FROM FR 46 TO FR 59;
Access panels :
826
Skills :
EL 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-046
MRB 20.0.151/03
I 72 MO
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
200151-03-1 AFT CARGO COMPARTMENT 151 GVI
152
N
GENERAL VISUAL INSPECTION OF EWIS INSTALLED AT THE
ACT(S) (EWIS)
PREP.: ACT;
NOTE : THIS TASK COULD BE PERFORMED AT THE OPPORTUNITY
OF R/I
THE INTERVAL IS 72 ATC MO
Skills :
EL 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-030
MRB 20.0.161/01
I 72 MO
ALL 200161-01-1 BULK CARGO COMPARTMENT 161 RST
162
N
CLEANING OF EWIS INSTALLED IN THE BULK CARGO
PREP. : SIDEWALL PANELS FROM FR 59 TO FR 65;
Access panels :
826
Skills :
AF 1 0.30 MHrs
AMM 249200/7
AMT 249200-100-001
MRB 20.0.171/01
I 144 MO
ALL 200171-01-1 AFT CABIN UNDERFLOOR COMPARTMENT 171 RST
172
N
CLEANING OF EWIS INSTALLED IN THE AFT CABIN
UNDERFLOOR COMPARTMENT (ONLY IF CONTAMINATED)(EWIS)
PREP. : ACT NO.5 REMOVED (IF INSTALLED);
CABIN FLOOR PANELS FROM FR 65 TO FR 70;
Access panels :
161DW 162DW 171AL 172AR 826
Skills :
EL 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-027
MRB 20.0.191/01
I 72 MO
ALL 200191-01-1 AIR CONDITIONING COMPARTMENT & FAIRINGS 191 RST
192
N
CLEANING OF EWIS INSTALLED IN THE AIR CONDITIONING
COMPARTMENT AND FAIRINGS (ONLY IF CONTAMINATED)
(EWIS)
Access panels :
191AB 191AT 191BT 191CT 191DT 191EB 191ET
191GB 191HB 191JB 191KB 191LB 192AB 192AT
192BT 192CT 192DT 192EB 192ET 192FB 192KB
192LB 192MB
Skills :
AF 1 0.30 MHrs
AMM 249200/7
AMT 249200-100-016
MRB 20.0.211/01
I 144 MO
ALL 200211-01-1 COCKPIT 211 RST
212
N
CLEANING OF EWIS INSTALLED IN THE COCKPIT
(ONLY IF CONTAMINATED) (EWIS)
Access panels :
211BC 211FC 211HC 831
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-017
MRB 20.0.211/02
I 72 MO
ALL 200211-02-1 COCKPIT 211 RST
212
N
CLEANING OF EWIS INSTALLED IN 49VU AND 120VU
PREP. : 120VU;
49VU;
Access panels :
831 841
Skills :
AF 1 0.60 MHrs
AMM 249200/6
AMT 249200-210-035
MRB 20.0.211/03
I 144 MO
ALL 200211-03-1 COCKPIT 211 GVI
212
N
GENERAL VISUAL INSPECTION OF EWIS
OF 49VU AND THE 120VU (EWIS)
PREP. : 120VU;
49VU;
Access panels :
831 841
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-007
MRB 20.0.221/01
I 144 MO
ALL 200221-01-1 FORWARD CABIN UTILITY AREA 221 RST
222
N
CLEANING OF EWIS INSTALLED IN THE FORWARD
CABIN UTILITY AREA (ONLY IF CONTAMINATED) (EWIS)
PREP. : DOOR FRAME LINING REMOVED;
FLOOR PANELS FROM FR 12 TO FR 20;
FURNISHINGS FROM FR 12 TO FR 20;
GALLEYS AND TOILETS REMOVED;
SEATS REMOVED;
Access panels :
831 841
Skills :
AF 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-010
MRB 20.0.223/01
I 144 MO
ALL 200223-01-1 FORWARD CABIN OVERHEAD COMPARTMENT 223 RST
224
N
CABIN OVERHEAD COMPARTMENT (ONLY IF CONTAMINATED)
(EWIS)
PREP. : CEILING PANELS FROM FR 12 TO FR 20;
OVERHEAD STOWAGE COMPARTMENTS REMOVED;
Access panels :
831 841
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-029
MRB 20.0.223/02
I 144 MO
ALL 200223-02-1 FORWARD CABIN OVERHEAD COMPARTMENT 223 GVI
224
N
GENERAL VISUAL INSPECTION OF EWIS
OF THE 2000VU (EWIS)
PREP. : 2000VU;
Access panels :
831 841
Skills :
AF 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-012
MRB 20.0.231/02
I 144 MO
ALL 200231-02-1 FORWARD PASSENGER COMPARTMENT 231 RST
232
N
PASSENGER COMPARTMENT (ONLY IF CONTAMINATED)
(EWIS)
FURNISHINGS;
GALLEYS;
SEATS REMOVED;
SIDEWALL PANELS FROM FR 20 TO FR 35.8;
TOILET REMOVAL/INSTALLATION;
Access panels :
831 841
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-036
MRB 20.0.231/03
I 72 MO
ALL 200231-03-1 FORWARD PASSENGER COMPARTMENT 231 GVI
232
N
GENERAL VISUAL INSPECTION OF EWIS CONNECTIONS,
ATTACHMENT POINTS AND ELECTRICAL CONNECTORS BETWEEN
SEAT AND A/C INSTALLED IN THE FORWARD PASSENGER
COMPARTMENT (EWIS)
NOTE: THIS TASK IS APPLICABLE FOR A/C VERSIONS WITH
SEATS AND WITH EWIS BETWEEN SEAT AND A/C ONLY
Access panels :
831 841
Skills :
AF 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-011
MRB 20.0.233/02
I 144 MO
ALL 200233-02-1 FORWARD PASSENGER COMPARTMENT OVERHEAD 233 RST
234
N
COMPARTMENT
PASSENGER COMPARTMENT OVERHEAD COMPARTMENT
PREP. : CEILING PANELS FROM FR 20 TO FR 35.8;
Access panels :
841
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-811
MRB 20.0.233/04
I 144 MO
ALL 200233-04-1 FORWARD PASSENGER COMPARTMENT OVERHEAD 233 GVI
234
N
COMPARTMENT
GENERAL VISUAL INSPECTION OF ALL G & P ROUTES
INSTALLED IN THE FORWARD PASSENGER
COMPARTMENT OVERHEAD COMPARTMENT (EWIS)
PREP. : CEILING PANELS FROM FR 20 TO FR 35.8;
Access panels :
831 841
Skills :
EL 1 0.40 MHrs
AMM 249200/7
AMT 249200-100-008
MRB 20.0.241/02
I 144 MO
ALL 200241-02-1 CENTER PASSENGER COMPARTMENT 241 RST
242
N
CLEANING OF EWIS INSTALLED IN THE CENTER
PASSENGER COMPARTMENT (ONLY IF CONTAMINATED)
(EWIS)
PREP. : FURNISHINGS;
SEATS REMOVED;
SIDEWALL PANELS FROM FR 35.8 TO FR 47;
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-031
MRB 20.0.241/03
I 144 MO
ALL 200241-03-1 CENTER PASSENGER COMPARTMENT 241 GVI
242
N
GENERAL VISUAL INSPECTION OF G ROUTES INSTALLED
AT FR 47 (EWIS)
PREP. : LINING AT FR 47, RH ONLY;
GALLEY & TOILET IF INSTALLED;
Access panels :
832 842
Skills :
EL 1 0.30 MHrs
AMM 249200/6
AMT 249200-210-037
MRB 20.0.241/04
I 72 MO
ALL 200241-04-1 CENTER PASSENGER COMPARTMENT 241 GVI
242
N
SEATS AND A/C INSTALLED IN THE CENTER PASSENGER
COMPARTMENT (EWIS)
NOTE : THIS TASK IS APPLICABLE FOR A/C VERSIONS WITH
PREP.: SEAT COVERS REMOVED AS NECESSARY;
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-014
MRB 20.0.243/02
I 144 MO
ALL 200243-02-1 CENTER PASSENGER OVERHEAD COMPARTMENT 243 RST
244
N
CLEANING OF EWIS INSTALLED IN THE CENTER
PASSENGER OVERHEAD COMPARTMENT (ONLY IF CONTAMINATED)
(EWIS)
PREP. : CEILING PANELS REMOVED;
OVERHEAD STOWAGE BINS FROM FR 35.8 TO FR
47.1;
Access panels :
832 842
Skills :
EL 1 0.40 MHrs
AMM 249200/6
AMT 249200-210-038
MRB 20.0.243/04
I 144 MO
ALL 200243-04-1 CENTER PASSENGER OVERHEAD COMPARTMENT 243 GVI
244
N
GENERAL VISUAL INSPECTION OF G AND P ROUTES
INSTALLED IN THE CENTER PASSENGER OVERHEAD
COMPARTMENT (EWIS)
OVERHEAD STOWAGE BINS FROM FR 35.8 TO FR 47.1;
Access panels :
832 842
Skills :
EL 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-018
MRB 20.0.251/01
I 144 MO
ALL 200251-01-1 AFT PASSENGER COMPARTMENT 251 RST
252
N
CLEANING OF EWIS INSTALLED IN THE AFT PASSENGER
SIDEWALL PANELS FROM FR 47 TO FR 64 REMOVED;
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
AMM 249200/6
AMT 249200-210-039
MRB 20.0.251/03
I 72 MO
ALL 200251-03-1 AFT PASSENGER COMPARTMENT 251 GVI
252
N
SEATS AND A/C INSTALLED IN THE AFT PASSENGER
COMPARTMENT (EWIS)
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-021
MRB 20.0.253/01
I 144 MO
ALL 200253-01-1 AFT PASSENGER OVERHEAD COMPARTMENT 253 RST
254
N
CLEANING OF EWIS INSTALLED IN THE AFT PASSENGER
OVERHEAD COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
OVERHEAD STOWAGE BINS FROM FR 47 TO FR 64
REMOVED;
Access panels :
832 842
Skills :
EL 1 0.40 MHrs
AMM 249200/6
AMT 249200-210-042
MRB 20.0.253/02
I 144 MO
ALL 200253-02-1 AFT PASSENGER OVERHEAD COMPARTMENT 253 GVI
254
N
GENERAL VISUAL INSPECTION OF G AND P ROUTES INSTALLED
IN THE AFT PASSENGER OVERHEAD COMPARTMENT (EWIS)
OVERHEAD STOWAGE BINS FROM FR 47 TO FR 64
REMOVED;
Access panels :
832 842
Skills :
EL 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/7
AMT 249200-100-022
MRB 20.0.261/01
I 144 MO
ALL 200261-01-1 AFT CABIN UTILITY AREA 261 RST
262
N
UTILITY AREA (ONLY IF CONTAMINATED) (EWIS)
PREP. : SEATS REMOVED;
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
AMM 249200/6
AMT 249200-210-044
MRB 20.0.261/02
I 144 MO
ALL 200261-02-1 AFT CABIN UTILITY AREA 261 GVI
262
N
GENERAL VISUAL INSPECTION OF P ROUTES INSTALLED
IN THE AFT CABIN UTILITY AREA (EWIS)
PREP. : LINING AT FR 67;
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-040
MRB 20.0.261/03
I 72 MO
ALL 200261-03-1 AFT CABIN UTILITY AREA 261 GVI
262
N
SEATS AND A/C INSTALLED IN THE AFT CABIN UTILITY
AREA (EWIS)
SEATS AND WITH EWIS CONNECTIONS BETWEEN SEAT AND A/C
ONLY
Access panels :
832 842
Skills :
EL 1 0.50 MHrs
AMM 249200/7
AMT 249200-100-023
MRB 20.0.263/01
I 144 MO
ALL 200263-01-1 AFT CABIN OVERHEAD COMPARTMENT 263 RST
264
N
OVERHEAD COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
OVERHEAD STOWAGE BINS FROM FR 64 TO FR 70;
Access panels :
842
Skills :
EL 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-043
MRB 20.0.263/02
I 144 MO
ALL 200263-02-1 AFT CABIN OVERHEAD COMPARTMENT 263 GVI
264
N
IN THE AFT CABIN OVERHEAD COMPARTMENT (EWIS)
OVERHEAD STOWAGE BINS FROM FR 64 TO FR 70;
Access panels :
832 842
Skills :
EL 1 0.30 MHrs
AMM 249200/6
AMT 249200-210-045
MRB 20.0.263/03
I 144 MO
ALL 200263-03-1 AFT CABIN OVERHEAD COMPARTMENT 263 GVI
264
N
GENERAL VISUAL INSPECTION OF ALL EWIS OF 2001 VU
(EWIS)
PREP. : CIRCUIT BREAKER PANEL;
Access panels :
832 842
Skills :
EL 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-025
MRB 20.0.315/01
I 24 MO
ALL 200315-01-1 TAIL CONE AND APU ACCESSORY COMPARTMENT 315 GVI
316
N
IN THE TAIL CONE AND APU ACCESSORY COMPARTMENT (EWIS)
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EL 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-220-001
MRB 20.0.413/01
I 24 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
200413-01-1 UPPER FORWARD PYLON 413 DI
414
423
424
N
DETAILED INSPECTION OF EWIS INSTALLED
IN THE UPPER FORWARD PYLON (EWIS)
Access panels :
413AL 413BL 413CL 413DL 413EL 414AR 414AZ
414BR 414CR 414FR 423AL 423AZ 423BL 423CL
423DL 423FL 424AR 424BR 424CR 424ER
Skills :
EL 1 0.52 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-220-001
MRB 20.0.413/03
I 24 MO
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
200413-03-1 UPPER FORWARD PYLON 413 DI
414
423
424
N R
IN THE UPPER FORWARD PYLON (EWIS)
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
413AL 413AR 413BL 413BR 413CL 413CR 413DT
414AZ 423AL 423AR 423AZ 423BL 423BR 423CL
423CR 423DT 471AL 471AR 481AL 481AR
Skills :
B2 1 0.00 MHrs
EL 1 0.52 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-220-003
MRB 20.0.435/01
I 24 MO
ALL 200435-01-1 FAN AND ACCESSORY GEAR BOX 435 DI
436
445
446
N
DETAILED INSPECTION OF EWIS IN THE FAN AND
ACCESSORY GEAR BOX (EWIS)
Access panels :
437AL 438AR 447AL 448AR
Skills :
B2 1 0.00 MHrs
EL 1 0.52 MHrs
AMM 249200/6
AMT 249200-220-004
MRB 20.0.453/01
I 24 MO
ALL 200453-01-1 HOT SECTION 453 DI
454
463
464
N
IN THE HOT SECTION (EWIS)
Access panels :
451AL 452AR 461AL 462AR
Skills :
B2 1 0.00 MHrs
EL 1 0.52 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-801
MRB 20.0.540/02
I 144 MO
ALL 200540-02-1 WING FUEL TANK 540 GVI
640
N
WITHIN THE WING FUEL TANK (EWIS)
Access panels :
521AZ 521BZ 540AB 540AZ 540BB 540BZ 540CB
540DB 540EB 540FB 540GB 540HB 540JB 540KB
540LB 540MB 540NB 540PB 540QB 540RB 621AZ
621BZ 640AB 640AZ 640BB 640BZ 640CB 640DB
640EB 640FB 640GB 640HB 640JB 640KB 640LB
640MB 640NB 640PB 640QB 640RB
Skills :
EL 1 0.60 MHrs
AMM 249200/6
AMT 249200-210-802
MRB 20.0.550/01
I 144 MO
ALL 200550-01-1 VENT SURGE TANK 550 GVI
650
N
WITHIN THE VENT SURGE TANK (EWIS)
Access panels :
550AB 550BB 550CB 550DB 650AB 650BB 650CB
650DB
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-803
MRB 20.0.560/01
I 144 MO
ALL 200560-01-1 DRY BAY (OUTBOARD) 560 GVI
660
N
WITHIN THE DRY BAY (OUTBOARD) (EWIS)
Access panels :
560AB 660AB
Skills :
AF 1 0.30 MHrs
AMM 249200/6
AMT 249200-210-804
MRB 20.0.571/01
I 144 MO
ALL 200571-01-1 MLG BAY 571 GVI
671
N
GENERAL VISUAL INSPECTION OF P ROUTE PUMP
FEEDER (EWIS)
PREP. : PUMP WIRING FAIRINGS;
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-024
SIL 20-020
I 24 MO
ALL 202800-01-1 ELECTRICAL BONDING 300 DI
500
600
700
800
N
DETAILED INSPECTION OF BONDING LEADS LOCATED ON THE
FOLLOWING MOVABLE SURFACES: ELEVATOR, RUDDER, FLAPS,
FLAP TRACK FAIRINGS, SLATS, SPOILERS, AILERONS,
LANDING GEAR DOORS AND PASSENGER/CREW DOORS
Access panels :
325BL 325BR 325CL 325CR 325DL 325DR 325EL
325ER 334BB 334DB 334FB 334GB 334HB 344BB
344DB 344FB 344GB 344HB 521AB 522AB 522FB
522NB 522SB 571AB 573AB 573BB 573CB 575AB
575AT 575BB 575CB 575DB 575EB 575FB 575GB
575KB 575LB 575MB 590AB 590BB 621AB 622AB
622FB 622NB 622SB 671AB 673AB 673BB 673CB
675AB 675AT 675BB 675CB 675DB 675EB 675FB
675KB 675LB 675MB 690AB 831FZ 831GZ 832FZ
832GZ 841FZ 841GZ 842FZ 842GZ
Skills :
B2 1 0.00 MHrs
EL 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212149/7
AMT 212149-100-001
MRB 212100/05
I 24 000 FH
I 160 MO
ALL 212100-01-1 AIR DISTRIBUTION AND RECIRCULATION 131 RST N
CLEAN COCKPIT AIR SUPPLY DUCTING GRID
Access panels :
131MW 131PW 825
Skills :
AF 1 0.20 MHrs
AMM 212000/6
AMT 212000-210-001
MRB 212100/04
I 12 YE
ALL 212100-02-1 AIR DISTRIBUTION AND RECIRCULATION 200 GVI Y
GENERAL VISUAL INSPECTION OF RISER DUCTS IN
THE PASSENGER COMPARTMENT
Skills :
AF 1 0.50 MHrs
AMM 212141/3
AMT 212141-920-002
MRB 212100/02
See note
NT Check :
ALL 212141-01-1 RECIRCULATION FILTER 130 DIS N
DISCARD FILTER ELEMENTS OF RECIRCULATION SYSTEM
NOTE: THE INTERVAL OF THIS TASK REFER TO "A321 TIME CONTROLLED ITEMS LIST"
IN SECTION 3 OF AMS
Access panels :
131PW 132PW
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212000/6
AMT 212000-210-002
MRB 212300/02
I 12 YE
ALL 212300-01-1 LAVATORY AND GALLEY VENTILATION NT GVI Y
GENERAL VISUAL INSPECTION OF LAVATORY AND GALLEY
VENTILATION DUCTING IN ZONES 210 THROUGH 260
NOTE: WORKING ZONES 210, 220, 230, 240, 250, 260
Skills :
AF 1 0.10 MHrs
AMM 212300/3
AMT 212300-600-001
MRB 212300/03
I 1 000 FH
I 12 MO
ALL 212300-02-1 LAVATORY AND GALLEY VENTILATION 200 DIS Y
DISCARD LAVATORY AIR EXTRACTION FILTER ELEMENT
NOTE: DEPENDING ON OPERATING ENVIRONMENT AND
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT
INITIAL INTERVAL MAY BE USED.
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 212600/5
AMT 212600-710-001
MRB 212600/02
MRB 261500/01
I 750 FH
I 6 MO
ALL 212600-01-1 AVIONICS EQUIPMENT VENTILATION 210 OPT N
OPERATIONAL CHECK OF SYSTEM VIA MCDU
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212600/5
AMT 212600-710-002
MRB 212600/03
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
OPERATIONAL CHECK OF OVERRIDE FUNCTION (BLOWER AND
EXTRACT)
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 212600/5
AMT 212600-710-003
MRB 212600/04
I 7 500 FH
I 50 MO
OPERATIONAL CHECK OF SMOKE CONFIGURATION CONTROL
CIRCUIT
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 212600/5
AMT 212600-710-004
MRB 212600/05
I 15 000 FH
I 100 MO
OPERATIONAL CHECK OF DITCHING CONFIGURATION CONTROL
CIRCUIT
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212642/6
AMT 212642-200-003
MRB 212600/06
I 24 000 FH
I 160 MO
ALL 212600-05-1 AVIONICS EQUIPMENT VENTILATION 120 DI Y
DETAILED INSPECTION OF SKIN HEAT EXCHANGER DRAIN HOSE
CONNECTION AREA
Access panels :
812 822
Skills :
AF 1 0.40 MHrs
AMM 212642/6
AMT 212642-210-001
MRB 212600/08
I 24 000 FH
I 160 MO
DETAILED INSPECTION OF DEMISTER DRAIN HOSE CONNECTION
AREA
Skills :
AF 1 0.20 MHrs
AMM 212642/6
AMT 212642-210-002
SIL 21-074
I 24 000 FH
I 160 MO
DETAILED INSPECTION OF ELBOW DRAIN HOSE
CONNECTION AREA DOWNSTREAM OF BLOWER FAN
PREP. : ELBOW DUCT DOWNSTREAM OF BLOWER FAN
Access panels :
824
Skills :
AF 1 0.08 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212656/5
AMT 212656-280-002
MRB 212600/16
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
OPERATIONAL CHECK OF AIR INLET CHECK VALVE 2150 HM
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 122113/7
AMT 122113-100-002
MRB 212600/19
I 40 MO
ALL 212600-09-1 AVIONICS EQUIPMENT VENTILATION 120 CLN N
CLEAN GRID OF RELAY BOX VU PANELS
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT
INITIAL INTERVAL MAY BE USED.
Skills :
AF 1 0.50 MHrs
AMM 212643/3
AMT 212643-600-016
MRB 212600/21
I 3 600 FH
I 24 MO
See note
ALL 212600-11-1 AVIONICS EQUIPMENT VENTILATION 127 DIS N
AVIONICS EQUIPMENT VENTILATION
DISCARD DEMISTER FILTER ELEMENT AND FILTER CARTRIDGE
(LE BOZEC). APPLICABILITY WITH PN:402K200-X
Access panels :
824
Skills :
B2 1 0.00 MHrs
IN 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212641/6
AMT 212641-210-001
MRB 212600/07
I 6 YE
DETAILED INSPECTION OF CHECK VALVE FLAPPERS FOR
CONDITION AND OPERATION
Access panels :
824
Skills :
AF 1 0.10 MHrs
AMT 212652-000-802
SIL 21-159
NT Check : ALL 212652-01-1 AVIONICS VENT SKIN AIR INLET VALVE 824 RST N
(SAOV)
REMOVE SKIN AIR INLET VALVE FOR OVERHAUL
NOTE 1: TASK APPLICABILITY FOR AIRCRAFT INTALLED P/N VFT210B00 OR P/N
VFT210A2
NOTE 2: IN CASE TASK THRESHOLD/INTERVAL IS OVER DUE WHEN APPLYING CHANGES
OF AMSS ISS 13 AMD 00, THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS
ISS13 AMD 00 EFFECTIVE DATE IS NEXT C CHECK.
Access panels :
824
Skills :
MEC 1 1.32 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 212653/4
AMT 212653-000-001
MRB 212600/23
SIL 21-099
NT Check : ALL 212653-01-1 AVIONICS VENT SKIN AIR OUTL VLV(SAOV) 126 OVH Y
REMOVE SKIN AIR OUTLET VALVE FOR OVERHAUL.
NOTE 1: TASK APPLICABILITY FOR AIRCRAFT INSTALLED P/N: VFT300A1.
OF AMSS ISS 14 AMD 00, THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS ISS
14 AMD 00 EFFECTIVE DATE IS NEXT C CHECK.
Skills :
AF 1 0.50 MHrs
AMT 212653-000-803
SIL 21-159
NT Check : ALL 212653-02-1 AVIONICS VENT SKIN AIR OUTLET VALVE 126 RST N
(SAOV)
REMOVE SKIN AIR OUTLET VALVE FOR OVERHAUL.
NOTE 1: TASK APPLICABILITY FOR AIRCRAFT INSTALLED P/N: VFT300B00.
Skills :
MEC 1 1.27 MHrs
AMM 213100/5
AMT 213100-710-002
MRB 213100/02
I 9 000 FH
I 60 MO
ALL 213100-01-1 PRESSURE CONTROL AND MONITORING 210 OPT N
OPERATIONAL CHECK OF SYSTEM VIA MCDU
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 213100/5
AMT 213100-710-003
MRB 213100/03
I 9 000 FH
I 60 MO
ALL 213100-02-1 PRESSURE CONTROL AND MONITORING 210 FUC N
OPERATIONAL CHECK OF MANUAL MODE SELECTION AND MANUAL
MODE PRESSURE CONTROL AND FUNCTIONAL CHECK OF MANUAL
MODE CABIN ALTITUDE INDICATION AND OUTFLOW VALVE
POSITION INDICATION
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 213100/5
AMT 213100-710-004
MRB 213100/04
I 22 500 FH
I 150 MO
OPERATIONAL CHECK OF OUTFLOW VALVE CLOSING IN
DITCHING CONFIGURATION
Skills :
AF 1 0.10 MHrs
AMM 213100/5
AMT 213100-710-005
MRB 213100/05
I 22 500 FH
I 150 MO
OPERATIONAL CHECK OF OUTFLOW VALVE PARTIAL OPENING BY
EMERGENCY RAM AIR SWITCH
Skills :
AF 1 0.05 MHrs
AMM 213100/3
AMT 213100-600-001
MRB 21.31.00/07
NT Check : ALL 213100-08-1 PRESSURE CONTROL AND MONITORING 260 RST N
REMOVE SAFETY VALVE FOR RESTORATION
PREP. : ACCESS THROUGH REAR GALLEY WALL REQUIRED;
Skills :
AF 1 0.77 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 215243/6
AMT 215243-210-001
MRB 215000/06
I 24 000 FH
I 120 MO
ALL 215000-02-1 AIR COOLING AND TEMPERATURE CONTROL 130 DI
190
Y
DETAILED INSPECTION OF PACK AIR CHECK VALVES FLAPPERS
FOR CONDITION AND OPERATION
Access panels :
131PW 132PW 191BB 192FB
Skills :
AF 1 0.60 MHrs
AMM 216151/6
AMT 216151-200-001
MRB 215000/14
I 6 000 FH
I 48 MO
ALL 215000-03-2 PACK RAM AIR INLET 190 DI Y
DETAILED INSPECTION OF ACTUATOR MECHANISM AND INLET
FLAP FOR EXCESSIVE PLAY AND CHECK GAP BETWEEN INLET
NOSE AND DIFFUSOR RAMP
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMM 215141/4
AMT 215141-920-001
MRB 215000/10
I 9 000 FH
I 60 MO
See note
ALL 215141-01-1 AIR COOLING AND TEMPERATURE CONTROL 130 FUC N
REMOVE OZONE CONVERTER FOR FUNCTIONAL CHECK
NOTE: DEPENDING ON OPERATING ENVIRONMENT AND OPERATORS EXPERIENCE, A LESS
FREQUENT OR MORE FREQUENT INITIAL INTERVAL
MAY BE USED.
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 215200/7
AMT 215200-100-001
MRB 215000/12
SIL 21-067
See note
NT Check :
ALL 215200-01-1 AIR CONDITIONING PACK 191 RST
192
N
REMOVE PRIMARY AND MAIN HEAT EXCHANGERS FOR
CLEANING.
FREQUENT OR MORE FREQUENT INITIAL INTERVAL MAY BE USED.
Access panels :
191KB 192KB
Skills :
AF 2 4.00 MHrs
B2 1 0.00 MHrs
AMT 215200-100-002
MRB 21.50.00/15
SIL 21-067
NT Check : ALL 215200-02-2 AIR CONDITIONING PACK 191 RST
192
N
REMOVE REHEATER FOR CLEANING
NOTE : CREDIT CAN BE TAKEN FROM TASK 215200-06-1
Access panels :
191KB 192KB
Skills :
AF 2 1.68 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 215200/5
AMT 215200-790-001
MRB 215000/16
SIL 21-067
NT Check : ALL 215200-04-1 AIR CONDITIONING PACK 191 FUC
192
N
REMOVE CONDENSER FOR LEAK CHECK
Access panels :
191KB 192KB
Skills :
AF 1 1.50 MHrs
AMM 215200/4
AMT 215200-920-001
MRB 215000/17
SIL 21-039
SIL 36-047
I 12 000 FH
I 48 MO
2255
2303
215200-07-1 AIR COOLING AND TEMPERATURE CONTROL 191 RAR
192
N
DISCARD COMBO SEALS AND PERISEALS ON HOT AIR INLET
DUCTING, PACK DUCTING AND TRIM AIR DUCTING.
.
NOTE: - DEPENDING ON OPERATING ENVIRONMENT AND OPERATORS EXPERIENCE, A LESS
- TASK MAY BE COMBINED WITH TASK 361100-05-1.
Access panels :
191KB 192KB
Skills :
AF 1 10.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 215200-920-002
MRB 21.50.00/17
SIL 21-039
SIL 36-047
I 12 000 FH
I 48 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
215200-08-1 AIR COOLING AND TEMPERATURE CONTROL 191 DIS
192
N D
DISCARD O-RING SEALS ON HOT AIR INLET DUCTING, PACK
DUCTING AND TRIM AIR DUCTING.
NOTE1:
- DEPENDING ON OPERATING ENVIRONMENT AND OPERATORS
EXPERIENCE A HIGHER INITIAL INTERVAL MAY BE USED.
NOTE2: TASK THRESHOLD IS NEXT C CHECK
Access panels :
191KB 192KB
Skills :
AF 1 5.00 MHrs
AMM 215200/6
AMT 215200-200-001
MRB 215000/19
SIL 21-067
I 12 000 FH
I 80 MO
ALL 215222-01-1 AIR CYCLE MACHINE 191 DI
192
Y
DETAILED INSPECTION OF INTERIOR AND EXTERIOR
OF PLENUM CHAMBER (10HM5 AND 11HM5)
FOR SIGNS OF DELAMINATION.
NOTE : TO BE ACCOMPLISHED WITH TASK 215200-01-1
PREP.: REMOVE HEAT EXCHANGER
Access panels :
191KB 192KB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 215200/6
AMT 15200-200-012
AMT 215200-200-012
SIL 21-128
I 24 000 FH
I 160 MO
ALL 215242-01-1 INJECTOR - WATER 191 GVI
192
N
GENERAL VISUAL INSPECTION OF WATER INJECTOR NOZZLES
FOR EROSION
Skills :
AF 1 0.60 MHrs
AMM 215500/5
AMT 215500-710-001
MRB 215000/04
I 15 000 FH
I 100 MO
ALL 215500-01-1 EMERGENCY RAM AIR INLET 210 OPT N
OPERATIONAL CHECK OF EMERGENCY RAM AIR INLET SYSTEM
Skills :
AF 1 0.10 MHrs
AMM 215500/5
AMT 215500-710-002
MRB 215000/11
SIL 21-060
I 15 000 FH
I 100 MO
ALL 215500-02-1 EMERGENCY RAM AIR INLET 210 OPT N
OPERATIONAL CHECK OF EMERGENCY RAM AIR INLET AND FLOW
CONTROL VALVE CLOSING IN DITCHING CONFIGURATION
Skills :
AF 1 0.10 MHrs
AMM 215541/6
AMT 215541-210-001
MRB 215000/07
I 24 000 FH
I 160 MO
ALL 215541-01-1 EMERGENCY RAM AIR INLET CHECK VALVE 137 DI Y
DETAILED INSPECTION OF EMERGENCY RAM AIR/LP GROUND
AIR CHECK VALVE FLAPPERS FOR CONDITION AND OPERATION
Access panels :
131PW
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 215800-200-001
MRB 21.58.00/01
NT Check : 4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
215800-01-1 AIR COOLING AND TEMPERATURE CONTROL 191 RST Y R
REMOVE CSAS OZONE CONVERTER FOR RESTORATION
NOTE: IF SYSTEM IS DEACTIVATED WHEN TASK BECOMES DUE,
TASK MAY BE POSTPONED UNTIL REACTIVATION.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Access panels :
191BB
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 215800-100-001
MRB 21.58.00/02
NT Check : 4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
215800-02-1 AIR COOLING AND TEMPERATURE CONTROL 191 RST Y R
REMOVE CSAS HEAT EXCANGER FOR CLEANING
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Access panels :
191BB
Skills :
AF 1 0.50 MHrs
AMM 216317/6
AMT 216317-210-001
MRB 215000/02
I 7 500 FH
I 50 MO
ALL 216000-01-1 AIR COOLING AND TEMPERATURE CONTROL 200 DI Y
DETAILED INSPECTION OF CABIN SENSOR DUCT AND
TEMPERATURE SENSOR FOR CONTAMINATION
Access panels :
231CC 251CC
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 216300/5
AMT 216300-710-002
MRB 215000/03
I 9 000 FH
I 60 MO
2255
2261
2267
2303
2480
216000-02-1 AIR COOLING AND TEMPERATURE CONTROL 210 OPT N
OPERATIONAL CHECK OF ZONE CONTROLLER (BACK UP
SWITCHING) VIA CFDS/MCDU
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 216300/3
AMT 216300-920-001
SIL 21-134
I 12 000 FH
I 80 MO
ALL 216000-03-2 TEMPERATURE CONTROL 130 DIS N
DISCARD TRIM AIR PRESSURE REGULATING VALVE FILTER
NOTE: INTERVAL MAY BE ADJUSTED IN ACCORDANCE WITH
OPERATORS EXPERIENCE
Access panels :
131NW 131PW
Skills :
AF 1 1.50 MHrs
AMM 216342/6
AMT 216342-210-001
MRB 215000/05
I 9 000 FH
I 60 MO
ALL 216242-01-1 AIR COOLING AND TEMPERATURE CONTROL 191 DI Y
DETAILED INSPECTION OF TRIM AIR CHECK
VALVE FLAPPERS FOR CONDITION AND OPERATION
PREP. : CHECK VALVE;
Access panels :
191BB 192FB
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 22 AUTO FLIGHT
Task
code
Threshold
Interval
Ctrl References Eff
AMM 221000/5
AMT 221000-710-002
MRB 221000/01
I 15 000 FH
I 100 MO
ALL 221000-01-1 AUTOPILOT/FLIGHT DIRECTOR 210 OPT N
OPERATIONAL CHECK OF AP DISENGAGEMENT AND LOCKING
DEVICES OF SIDE STICK CONTROLLER AND RUDDER PEDALS
Skills :
IN 1 0.25 MHrs
AMM 223000/5
AMT 223000-710-003
MRB 223000/01
I 22 500 FH
I 150 MO
ALL 223000-01-1 AUTOTHRUST 210 OPT N
OPERATIONAL CHECK OF ENGINE/AUTOTHRUST SYSTEM
ISOLATION
Skills :
INS 1 0.25 MHrs
AMM 226000/5
AMT 226000-710-002
MRB 226000/01
I 750 FH
I 6 MO
ALL 226000-01-1 FLIGHT AUGMENTATION 210 OPT N
OPERATIONAL CHECK OF AUTOMATIC CHANGEOVER (AFS TEST)
Skills :
B2 1 0.00 MHrs
INS 1 0.25 MHrs
AMM 226000/5
AMT 226000-710-001
MRB 226000/02
I 7 500 FH
I 50 MO
OPERATIONAL CHECK OF FAC 2 FUNCTIONS
Skills :
B2 1 0.00 MHrs
INS 1 0.25 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 22 AUTO FLIGHT
Task
code
Threshold
Interval
Ctrl References Eff
AMM 226000/5
AMT 226000-710-003
MRB 226000/03
I 7 500 FH
I 50 MO
OPERATIONAL CHECK OF "RETURN TO LOWSPEED" FUNCTION
Skills :
B2 1 0.00 MHrs
INS 1 0.25 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 23 COMMUNICATI0NS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 231300/5
AMT 231300-710-002
MRB 231300/01
MRB 343600/01
MRB 345100/01
MRB 345300/01
MRB 345500/01
I 7 500 FH
I 50 MO
ALL 231300-01-1 RADIO MANAGEMENT 210 OPT N
OPERATIONAL CHECK OF RADIO NAVIGATION SELECTION IN
STANDBY MODE USING RMP 1 AND 2
Skills :
B2 1 0.00 MHrs
RA 1 0.10 MHrs
AMM 233600/5
AMT 233600-710-007
MRB 233300/01
I 15 000 FH
I 100 MO
ALL 233300-01-1 PASSENGER ENTERTAINMENT (MUSIC & VIDEO) 200 OPC N D
OPERATIONAL CHECK OF IFES POWER SHUTDOWN FUNCTION BY
USING THE VCC MASTER SWITCH
Access panels :
831 841
Skills :
RA 1 0.17 MHrs
AMM 235100/5
AMT 235100-710-003
MRB 235000/01
I 15 000 FH
I 100 MO
ALL 235100-01-1 AUDIO MANAGEMENT 210 OPT N
OPERATIONAL CHECK OF CAPT. AND F/O AUDIO CONTROL
PANELS SWITCHING TO THIRD AUDIO CONTROL PANEL
Skills :
RA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 236100/6
AMT 236100-200-001
MRB 236000/01
I 3 000 FH
I 16 MO
4A Check :
ALL 236142-01-1 STATIC DISCHARGER RETAINER 300 CHK
500
600
N
RESISTANCE CHECK TIP TO RETAINER. BONDING CHECK
RETAINER TO STRUCTURE
Skills :
B2 1 0.00 MHrs
RA 1 1.80 MHrs
AMM 237100/5
AMT 23700-710-001
MRB 237100/01
I 7 500 FH
I 50 MO
ALL 237100-01-1 COCKPIT VOICE RECORDER 210 OPT N
OPERATIONAL CHECK OF CVR AND CVR-CHANNEL RECORDING
Skills :
B2 1 0.00 MHrs
RA 1 0.40 MHrs
AMM 237100/5
AMT 237100-710-002
MRB 237100/02
I 15 000 FH
I 100 MO
ALL 237100-02-1 COCKPIT VOICE RECORDER 210 OPT N
OPERATIONAL CHECK OF CVR RECORDING LOGIC INCLUDING
TIME DELAY RELAY
Skills :
RA 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 237135/4
AMT 237135-920-001
MRB 237100/3
See note
NT Check :
ALL 237135-01-1 COCKPIT VOICE RECORDER 312 RST Y
DISCARD ULB BATTERY
NOTE: THE INTERVAL OF THIS TASK REFER TO "A321 TIME
CONTROLLED ITEMS LIST" IN SECTION 3 OF AMS.
Access panels :
312AR
Skills :
RA 1 0.10 MHrs
AMM 237100/5
AMT 237100-720-001
MRB 237100/04
See note
NT Check :
ALL 237135-02-1 CVR ULB OPERATIONAL TEST 312 OPT Y
OPERATIONAL CHECK OF ULB
Access panels :
312AR
Skills :
INS 1 0.70 MHrs
AMM 237300/5
AMT 237300-710-002
MRB 237300/01
I 22 500 FH
I 150 MO
2255
2261
2267
2303
2480
237300-01-1 CABIN INTERCOMMUNICATION DATA SYSTEM 210 OPT N
OPERATIONAL CHECK FOR SECONDARY POWER SUPPLY TO
DIRECTORS AND DECODER/ENCODER UNITS, AND
DECODER/ENCODER UNITS-A CUT OFF FUNCTION
Skills :
RA 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 237300-710-036
MRB 23.73.00/03
I 7 500 FH
I 50 MO
ALL 237300-03-1 CABIN INTERCOMMUNICATION DATA SYSTEM 200 OPC N
OPERATIONAL CHECK OF LOUDSPEAKERS VIA MCDU
NOTE: IN CASE TASK THRESHOLD/INTERVAL IS OVER DUE WHEN APPLYING CHANGES OF
AMSS ISS 13 AMD 00, THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS ISS 13
AMD 00 EFFECTIVE DATE IS NEXT 2A CHECK.
Access panels :
831 841
Skills :
B2 1 0.00 MHrs
RA 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 237300-710-038
MRB 23.73.00/04
I 22 500 FH
I 150 MO
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
237300-04-1 CABIN INTERCOMMUNICATION DATA SYSTEM 200 OPC N R
OPERATIONAL CHECK OF DECODER/ENCODER UNITS ESSENTIAL
POWER SUPPLY, AND DECODER/ENCODER UNITS-A CUT OFF
FUNCTION
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
831 841
Skills :
RA 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 237300-710-042
MRB 23.73.00/08
I 15 000 FH
I 100 MO
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
237300-08-1 CABIN INTERCOMMUNICATION DATA SYSTEM 200 OPC N
OPERATIONAL CHECK OF BATTERY BUS POWERED PA
Access panels :
831 841
Skills :
RA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-003
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 240000-04-1 ELECTRICAL POWER 521 TPS
621
N
APPLY TEMPORARY PROTECTION TO END FITTINGS OF
ELECTRICAL CONDUITS IN WING INBOARD LEADING
EDGE
NOTE : SAME INTERVAL AND ACCESS AS FOR TASK
ZL-521-01-1
TPS: APPLICATION OF TPS TYPE 2 GRADE 2
Access panels :
471CL 482CR 521GB 621GB
Skills :
B2 1 0.00 MHrs
EL 1 1.50 MHrs
AMM 249200/6
AMT 249200-210-004
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
622
N
ELECTRICAL CONDUITS IN WING OUTBOARD LEADING
EDGE
ZL-522-01-1
Access panels :
522AB 622AB
Skills :
B2 1 0.00 MHrs
EL 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-014
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
574
671
674
N
ELECTRICAL CONDUITS IN MAIN LANDING GEAR BAY
AND FALSE SPAR BOX
ZL-574-01-1
Access panels :
574AB 574BB 674AB 674BB
Skills :
B2 1 0.00 MHrs
EL 1 3.00 MHrs
AMM 249200/6
AMT 249200-210-006
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
675
N
ELECTRICAL CONDUITS IN WING OUTBOARD TRAILING
EDGE
Access panels :
575BB 575CB 575DB 575EB 575FB 575GB 575HB
575KB 575LB 575MB 675BB 675CB 675DB 675EB
675FB 675GB 675HB 675KB 675LB 675MB
Skills :
B2 1 0.00 MHrs
EL 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-013
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
631
N
ELECTRICAL CONDUITS IN FLAP TRACK NUMBER 2
FAIRING
ZL-531-01-1
Access panels :
531AT 631AT
Skills :
B2 1 0.00 MHrs
EL 1 1.50 MHrs
AMM 249200/6
AMT 249200-210-005
SIL 24-067
I 6 YE
634
N
ELECTRICAL CONDUITS IN WING TIP
ZL-534-01-1 AND ZL-534-01-2
Access panels :
534AB 634AB
Skills :
EL 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-015
SIL 24-067
I 12 YE
660
N
ELECTRICAL CONDUITS IN DRY BAY (OUTBOARD)
ZL-560-01-1
Access panels :
560AB 660AB
Skills :
EL 1 1.50 MHrs
AMM 249200/6
AMT 249200-210-007
SIL 24-067
I 6 YE
192
N
ELECTRICAL CONDUITS IN AIR CONDITIONING
COMPARTMENT
ZL-191-02-1
Access panels :
191AB 191AT 191BB 191BT 191CB 191CT 191DB
191DT 191EB 191ET 191GB 191HB 191JB 191KB
191LB 192AB 192AT 192BT 192CT 192DT 192EB
192ET 192FB 192KB 192LB 192MB
Skills :
EL 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-010
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
312
N
ELECTRICAL CONDUITS IN FUSELAGE TAIL AREA
ZL-311-01-1, ZL-315-01-1
Access panels :
312AR 314AR 315AL 316AR
Skills :
B2 1 0.00 MHrs
EL 1 1.50 MHrs
AMM 249200/6
AMT 249200-210-008
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 240000-13-1 ELECTRICAL POWER 325 TPS N
ELECTRICAL CONDUITS IN VERTICAL STABILIZER
TRAILING EDGE
ZL-325-01-1
Access panels :
325BL 325BR 325CL 325DL
Skills :
B2 1 0.00 MHrs
EL 1 0.75 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 249200/6
AMT 249200-210-012
SIL 24-067
I 12 YE
322
324
N
ELECTRICAL CONDUITS IN VERTICAL STABILIZER
LEADING EDGE
ZL-321-01-1, ZL-322-01-1, ZL 324-01-1
Access panels :
321AL 322BL 324AT
Skills :
EL 1 2.25 MHrs
AMM 249200/6
AMT 249200-210-011
SIL 24-067
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
344
N
ELECTRICAL CONDUITS IN TRIMMABLE HORIZONTAL
STABILIZER
ZL-334-01-1
Access panels :
334CB 334DB 334EB 344CB 344DB 344EB
Skills :
B2 1 0.00 MHrs
EL 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 240000/6
AMT 240000-200-004
SIL 20-017
T 24 MO
I 36 MO
ALL 240000-17-1 ELECTRICAL POWER 100 OPC
200
N
ELECTRICAL POWER, OPENING AND CLOSING OF ALL CIRCUIT
BREAKERS.
PREP. : ELECTRICAL POWER OFF.
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 244100/5
AMT 244100-740-002
MRB 242000/19
I 750 FH
I 6 MO
ALL 242000-01-1 AC GENERATION 210 OPC Y
OPERATIONAL CHECK OF GAPCU VIA CFDS
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
ENG 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 242100/3
AMT 242100-920-041
CMP 24-2-0000-001
MRB 24.20.00/20
SIL SUN236
T 150 FH
T 1 MO
I 800 FH
I 6 MO
ALL 242000-22-1 AC GENERATION 438 DIS
448
Y
- REMOVE AND DISCARD SCAVENGE AND CHARGE
FILTER ELEMENTS,
- DRAIN AND REPLENISH OIL SYSTEM
NOTE: - REPLACE FILTER ELEMENTS, DRAIN IDG OIL AND
REPLENISH AT 150 FH OR 1 MO AFTER AIRCRAFT
DELIVERY. THEREAFTER REFER TO INTERVAL.
- INTERVAL MAY BE ADJUSTED IN ACCORDANCE
WITH SIL SUN 236.
Access panels :
438AR 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.80 MHrs
AMM 242141/6
AMT 242141-200-010
MRB 242000/07
I 2 400 FH
I 24 MO
ALL 242100-06-1 INTEGRATED DRIVE GENERATOR 438 CHK
448
Y
CHECK TORQUE OF QUICK-ATTACH-DETACH (QAD) TENSION BOLT.
Access panels :
438AR 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 242151/6
AMT 242151-200-010
MRB 242000/05
I 150 FH
I 1 MO
See note
ALL 242100-07-1 INTEGRATED DRIVE GENERATOR 438 DI
448
Y
-CHECK OIL LEVEL OF INTEGRATED DRIVE GENERATOR
(GREEN RANGE) AND REPLENISH IF NECESSARY
-CHECK FILTER DIFFERENTIAL PRESSURE INDICATOR
(POP OUT NOT PROTRUDING)
FREQUENT OR MORE FREQUENT INITIAL INTERVAL MAY BE USED
Access panels :
438AR 448AR
Skills :
EN 1 0.04 MHrs
AMM 242100/5
AMT 242100-710-042
MRB 242000/11
NT Check : ALL 242100-09-1 INTEGRATED DRIVE GENERATOR 438 OPC
448
Y
OPERATIONAL CHECK OF INTEGRATED DRIVE GENERATOR
(IDG) DISCONNECT AND RECONNECT FUNCTION.
NOTE 1: TASK TO BE PERFORMED AT OPPORTUNITY OF
ENGINE CHANGE OR IDG CHANGE.
NOTE 2: RII TASK
Skills :
EN 2 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 242142/7
AMT 242142-100-040
CMM 24-21-42
MRB 242000/12
See note
NT Check :
ALL 242100-10-1 INTEGRATED DRIVE GENERATOR 437 RST
447
Y
CLEAN INTEGRATED DRIVE GENERATOR (IDG) OIL
COOLER.
NOTE: TASK TO BE PERFORMED AT OPPORTUNITY OF
ENGINE SHOP VISIT.
Skills :
EN 1 0.60 MHrs
AMM 242200/5
AMT 242200-710-002
MRB 242000/08
I 7 500 FH
I 50 MO
ALL 242200-01-1 AC MAIN GENERATION 210 OPT N
OPERATIONAL CHECK OF TRANSFER INHIBITION
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 242400/5
AMT 242400-710-002
MRB 242000/10
I 15 000 FH
I 100 MO
ALL 242400-02-1 AC GENERATION 210 OPT N
OPERATIONAL CHECK OF EMERGENCY GCU VIA CFDS
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 242500/5
AMT 242500-710-001
MRB 242000/09
I 7 500 FH
I 50 MO
ALL 242500-01-1 AC GENERATION 210 OPT N
OPERATIONAL CHECK OF AC ESS GENERATION SWITCHING
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 242600/5
AMT 242600-710-002
MRB 242000/14
I 15 000 FH
I 100 MO
ALL 242600-02-1 AC GENERATION 210 OPC N
OPERATIONAL CHECK OF MANUAL AND AUTOMATIC GALLEY AND
BUS SHEDDING
Skills :
EL 1 0.10 MHrs
AMM 243200/5
AMT 243200-710-001
MRB 243000/04
I 6 000 FH
I 48 MO
ALL 243200-01-1 DC GENERATION 210 OPT N
OPERATIONAL CHECK OF DC GENERATION SWITCHING
Skills :
B2 1 0.00 MHrs
EL 1 0.15 MHrs
AMM 243400/5
AMT 243400-710-001
MRB 243000/06
I 7 500 FH
I 50 MO
ALL 243400-01-1 DC GENERATION 210 OPT N
OPERATIONAL CHECK OF "DC EMERG. CONFIG" CAUTION
Skills :
B2 1 0.00 MHrs
EL 1 0.15 MHrs
AMM 243800/5
AMT 243800-710-001
MRB 243000/03
I 750 FH
I 6 MO
ALL 243800-01-1 DC MAIN GENERATION 210 OPT N
OPERATIONAL CHECK OF BATTERY CHARGE LIMITER NO 1 AND
NO 2 VIA CFDS
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 243851/6
AMT 243851-280-001
MRB 243000/05
See note
NT Check :
ALL 243851-01-1 DC GENERATION 126 RST N
REMOVE BATTERY FOR OVERHAUL
NOTE : INTERVAL IS IAW SAFT CMM 24-38-51 OR
REFER TO "A321 TIME CONTROLLED ITEMS LIST"
IN SECTION 3 OF AMS.
Access panels :
822
Skills :
EL 1 0.30 MHrs
AMT 243851-280-802 NT Check : ALL 243851-02-1 DC GENERATION 126 RST N
REMOVE BATTERY FOR CHECK IN WORKSHOP
NOTE 1 : THE INTERVAL OF THIS TASK REFER TO "A321 TIME
NOTE 2: CREDIT IS TAKEN FROM PREVIOUS
Access panels :
822
Skills :
AV 1 0.30 MHrs
AMM 242200/5
AMT 242200-710-001
MRB 245000/04
I 15 000 FH
I 100 MO
ALL 245100-01-1 AC/DC ELECTRICAL LOAD DISTRIBUTION 210 OPT N
OPERATIONAL CHECK OF GENERATOR LINE CONTACTOR OPENING
Skills :
EL 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 245100/5
AMT 245100-710-001
MRB 245000/05
I 15 000 FH
I 100 MO
ALL 245100-02-1 AC/DC ELECTRICAL LOAD DISTRIBUTION 210 OPC N
OPERATIONAL CHECK OF COMMERCIAL ELECTRIC LOAD
SHEDDING
Skills :
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 25 EQUIPEMENT & FURNISHING
Task
code
Threshold
Interval
Ctrl References Eff
IPC 25-65-01-52W
IPC 25-65-04-18U
See note
NT Check :
ALL VN256600-01 SURVIVAL KITS 200 OVH N
REMOVE SURVIVAL KITS FROM THE STOWAGE FOR OVERHAUL
P/N OFF: 60128-103 S/N OFF:
P/N ON: 60128-103 S/N ON: GRN:
AMM 251100/6
AMT 251100-200-001
MRB 251100/01
I 24 000 FH
I 160 MO
ALL 251100-01-1 COCKPIT SEATS 210 DI Y
DETAILED INSPECTION OF SEAT STRUCTURE AND SEAT
ATTACHMENT OF ALL FLIGHT DECK SEATS
Skills :
AF 1 0.30 MHrs
AMM 251151/6
AMT 251151-200-002
MRB 251100/02
I 7 500 FH
I 50 MO
ALL 251100-02-1 COCKPIT SEATS 210 CHK N
CHECK OF ADJUSTMENT OF SEAT CONTROL CABLES
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 252100/6
AMT 252100-210-001
MRB 252100/01
I 15 000 FH
I 100 MO
ALL 252100-01-1 PASSENGER COMPARTMENT SEATS 200 VCK Y
DETAILED INSPECTION OF SEAT TO FLOOR ATTACHMENT AND
GENERAL VISUAL INSPECTION OF SEAT STRUCTURE
Skills :
AF 2 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 252100/6
AMT 252100-210-002
MRB 252100/02
I 15 000 FH
I 100 MO
ALL 252100-02-1 PASSENGER COMPARTMENT SEATS 200 DI Y
DETAILED INSPECTION OF SEAT BELT ATTACHMENT, SEAT
BELT AND LOCK. CHECK OF LOCK
Skills :
AF 2 1.60 MHrs
AMM 252200/6
AMT 252200-210-001
MRB 252200/01
I 15 000 FH
I 100 MO
ALL 252200-01-1 CABIN ATTENDANT SEATS 200 VCK Y
DETAILED INSPECTION OF SEAT ATTACHMENT AND GENERAL
VISUAL INSPECTION OF SEAT STRUCTURE
Skills :
AF 1 0.50 MHrs
AMM 252200/6
AMT 252200-210-002
MRB 252200/02
I 15 000 FH
I 100 MO
ALL 252200-02-1 CABIN ATTENDANT SEATS 200 DI Y
DETAILED INSPECTION OF SEAT BELT ATTACHMENT, SEAT
BELT AND LOCK. CHECK OF LOCK
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 252344/6
AMT 252344-210-001
SIL 25-085
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 252331-01-1 PANELS - LOWER SIDEWALL 200 DI Y
DETAILED INSPECTION OF LOWER SIDE WALL PANEL
AND OF AREA BEHIND LOWER SIDE WALL PANEL
FOR FOREIGN MATERIAL ACCUMULATION.
NOTE : - ONE LOWER SIDE WALL PANEL IN FWD, MID
AND AFT PASSENGER CABIN SHOULD BE
REMOVED, (APPROX 2.5 MH)
- ALTERNATE SIDEWALL PANEL IS
RECOMMENDED AT NEXT INSPECTION
- INTERVAL MAY BE ADJUSTED ACCORDING TO
OPERATOR EXPERIENCE
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 253000/6
AMT 253000-210-001
MRB 253000/01
I 6 YE
ALL 253000-01-1 BUFFET AND GALLEY 200 DI Y
DETAILED INSPECTION OF ATTACHMENT POINTS
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 253000/3
AMT 253000-920-001
MRB 253000/04
I 5 500 FH
I 40 MO
ALL 253000-02-1 BUFFET AND GALLEY 200 RAD N
REMOVE AND DISCARD AIR FILTER ELEMENT
NOTE 1: TASK APPLICABLE ONLY IF FILTER ELEMENTS
ARE INSTALLED
NOTE 2: DEPENDING ON OPERATING ENVIRONMENT AND
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT INITIAL INTERVAL
MAY BE USED.
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
AMM 253400/7
AMT 253400-100-001
MRB 25-34-00/01
I 1 500 FH
I 12 MO
See note
2255
2261
2267
2303
2480
253400-01-1 GALLEY COOLING 200 RST Y
CLEAN "CHILLED AIR IN" AND "CHILLED AIR OUT" GRILLES/
FILTERS IN GALLEY CABINET
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 253400/7
AMT 253400-100-002
MRB 25.34.00/02
I 1 500 FH
I 12 MO
See note
ALL 253400-02-1 GALLEY COOLING 200 RST Y
CLEAN AIR CHILLER CONDENSER AIR FILTER
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 74-08-09
AMM 254000/6
AMT 254000-210-001
MRB 254000/01
I 6 000 FH
I 40 MO
ALL 254000-01-1 LAVATORIES 200 DI Y
DETAILED INSPECTION OF WASTE COMPARTMENT INCLUDING
WASTE FLAP AND OPERATIONAL CHECK OF WASTE FLAP
NOTE: INTERVAL IS 1000 FH FOR OPERATOR FLYING UNDER FAA REGULATIONS AS PER
FAA AD 74-08-09
Skills :
B2 1 0.00 MHrs
CA 1 0.20 MHrs
AMM 254000/6
AMT 254000-210-002
MRB 254000/03
I 80 MO
DETAILED INSPECTION OF ATTACHMENT POINTS
Skills :
CA 1 0.15 MHrs
AMM 254000-210-004
MRB 25.40.00/05
I 7 500 FH
LAVATORIES
DETAILED INSPECTION OF LAVATORY FLOOR PAN"
Skills :
ACA 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 255000/6
AMT 255000-200-002
MRB 255000/01
I 8 DY
ALL 255000-01-1 CARGO COMPARTMENTS 130 VCK
150
160
Y
VISUAL CHECK OF CARGO COMPARTMENT DECOMPRESSION,
LINING, FLOOR PANELS AND PRESSURE COMPENSATION VALVE
(AS FAR AS VISIBLE, IF ACT(S) INSTALLED)
Access panels :
825 826
Skills :
AF 1 0.90 MHrs
AMM 255000/6
AMT 255000-210-001
MRB 255000/03
I 8 000 FH
I 53 MO
ALL 255000-02-1 LOWER DECK CARGO LOADING 130 OPT
150
Y
PERFORM OPERATIONAL CHECK AND DETAILED INSPECTION OF
XZ-LATCHES
Access panels :
825 826
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 255000/6
AMT 255000-210-002
MRB 255000/02
I 4 000 FH
I 12 MO
ALL 255000-03-1 CARGO COMPARTMENTS 130 OPT
150
Y
PERFORM OPERATIONAL CHECK AND DETAILED INSPECTION OF
YZ DOOR SILL LATCHES
Access panels :
825 826
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 255000/6
AMT 255000-200-018
SIL 25-099
I 2 000 FH
I 400 DY
ALL 255000-07-1 LOWER DECK CARGO LOADING 130 DI
150
Y
DETAILED INSPECTION OF PDU ROLLERS FOR WEAR
AND DAMAGE
NOTE : IT IS RECOMMENDED TO ENSURE CLEANLINESS
IN THE VICINITY OF THE PDU ROLLERS
Access panels :
825 826
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 255000/6
AMT 255000-200-012
MRB 255000/14
I 24 000 FH
I 160 MO
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
255000-08-1 LOWER DECK CARGO LOADING 150 DI Y R
REMOVE XZ-ENDSTOPS AND YZ-LATCHES FOR DETAILED INSPECTION.
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 255000/6
AMT 255000-200-013
MRB 255000/15
I 24 000 FH
I 160 MO
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
255000-09-1 LOWER DECK CARGO LOADING 150 DI Y
REMOVE XZ-SINGLE LATCH 32 ACT FOR DETAILED INSPECTION
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 255000-200-015 I 24 000 FH
I 160 MO
5164
5241
5247
5343
5427
5469
5709
5994
255000-10-1 LOWER DECK CARGO LOADING 150 DI Y R
LOWER DECK CARGO LOADING
REMOVE FIXED XZ - LATCHES ACT FOR DETAILED INSPECTION
Skills :
MEC 1 0.50 MHrs
AMM 255000/6
AMT 255000-200-016
MRB 255000/17
I 750 FH
I 6 MO
ALL 255000-11-1 LOWER DECK CARGO LOADING 130 DI
150 VCK
Y
VISUAL CHECK OF XZ-LATCHES AND DOOR SILL LATCHES
NOTE: FOR A319 DOOR SILL LATCHES ONLY TO BE CHECKED IN FWD CC
Access panels :
825 826
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 255000-200-025
MRB 25.50.00/04
I 750 FH
I 6 MO
ALL 255000-16-1 CARGO COMPARTMENTS 130 DI
150
160
Y
DETAILED INSPECTION OF DIVIDER NETS, DOOR NETS
AND NET ATTACHMENT POINTS
NOTE: THE NUMBER OF AFFECTED ZONES MAY VARY ACCORDING
TO THE CARGO SYSTEMS INSTALLED.
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
AMT 255000-200-802 I 24 000 FH
I 160 MO
ALL 255000-25-1 CARGO COMPARTMENTS 130 DI
150
Y
REMOVE XZ-LATCHES FOR DETAILED INSPECTION
NOTE: : IN CASE TASK THRESHOLD/INTERVAL IS OVER DUE WHEN APPLYING CHANGES
14 AMD 00 EFFECTIVE DATE IS NEXT C CHECK
Access panels :
825 826
Skills :
B1 1 1.34 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256141/6
AMT 256141-200-001
MRB 256141/01
I 6 YE
ALL 256141-01-1 DESCENT DEVICE EMERGENCY 210 DI Y
DETAILED INSPECTION OF EMERGENCY ESCAPE ROPE AND ROPE
ATTACHMENT
Access panels :
211EC 212EC
Skills :
AF 1 0.20 MHrs
AMM 256200/6
AMT 256200-210-001
MRB 256200/01
I 750 FH
I 6 MO
ALL 256241-01-1 DOOR ESCAPE SLIDES 800 CHK N
CHECK DOOR AND OFFWING ESCAPE SLIDE/RAFT INFLATION RESERVOIR PRESSURE
NOTE: TASK IS NOT APPLICABLE FOR DEACTIVATED PASSENGER/CREW DOORS /
EMERGENCY EXITS.
DEPENDING ON AIRCRAFT CONFIGURATION, ALTERNATIVE ACCESS
PANELS ARE:
-151CW AND 152CW (A320 & A321) OR
-151SW AND 152SW (A319 & A318) OR
ACCESS TO OVERHEAD STOWAGE COMP. (FOR A/C WITH ACT) SEE AMM FOR
ACCESS PANELS TO BE OPENED
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256200/6
AMT 256200-750-001
MRB 256200/02
See note
NT Check :
ALL 256241-02-1 DOOR ESCAPE SLIDE 831 RAI
832
841
842
Y
REMOVE DOOR ESCAPE SLIDE/RAFT FOR HYDROSTATIC
TEST OF INFLATION RESERVOIR
NOTE :- TASK TO BE PERFORMED WITH 256241-03-1. TASK IS NOT APPLICABLE FOR
DEACTIVATED PASSENGER/CREW DOORS / EMERGENCY EXITS
- THE INTERVAL OF THIS TASK REFER TO "A321 TIME
Skills :
AF 2 2.40 MHrs
AMM 256244/4
AMT 256244-920-001
MRB 256200/03
See note
NT Check :
ALL 256241-03-1 DOOR ESCAPE SLIDE 831 RST
832
841
842
Y
REMOVE DOOR ESCAPE SLIDE/RAFT FOR RESTORATION
-TASK IS NOT APPLICABLE FOR DEACTIVATED PASSENGER/CREW DOORS / EMERGENCY
EXITS.
Skills :
AF 2 8.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256200/5
AMT 256200-710-001
MRB 256200/04
I 18 MO
ALL 256241-04-1 DOOR ESCAPE SLIDE 831 OPT
832
841
842
Y
OPERATIONAL CHECK OF FWD AND AFT PAX/CREW
DOOR ESCAPE SLIDES/RAFT DEPLOYEMENT.
NOTE : - DEPLOYMENT OF EITHER FWD DOOR 831
OR 841 SLIDE/RAFT AND DEPLOYEMENT
OF EITHER AFT DOOR 832 OR 842
SLIDE/RAFT
- ONE SAMPLE PER OPERATOR FLEET
(COMBINED A320/A321 FLEET).
- INTERVAL 18 MONTHS
- TASK IS NOT APPLICABLE FOR DEACTIVATED PASSENGER/CREW DOORS
- ALTERNATE DOOR POSITION AT NEXT
INTERVALE RECOMMENDED
Skills :
AF 1 1.20 MHrs
AMM 531100/6
AMT 531100-210-034
MRB 521000/07
SIL 53-054
I 1 110 CY
I 400 DY
ALL 256241-05-1 DOOR ESCAPE SLIDE 221 CLN
222
261
262
N
CLEAN DOOR GIRT BAR FITTING STOP LEVERS
NOTE : TASK IS NOT APPLICABLE FOR DEACTIVATED
PASSENGER/CREW DOORS
INTERVAL TO BE ADJUSTED ACCORDING TO
DOOR USAGE
Skills :
AF 1 0.65 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256247/4
AMT 256247-920-001
MRB 256200/03
See note
NT Check :
ALL 256247-01-1 DOOR 2/3 ESCAPE SLIDE 131 RST
132
151
152
N
REMOVE DOOR 2/3 ESCAPE SLIDE FOR RESTORATION
Skills :
AF 2 2.40 MHrs
AMM 256200/5
AMT 256200-710-003
MRB 256200/04
I 18 MO
ALL 256247-02-1 DOOR 2/3 ESCAPE SLIDE 833 OPT
834
843
844
N
OPERATIONAL CHECK OF FWD AND AFT EMERGENCY EXIT
DOOR ESCAPE SLIDE DEPLOYMENT
NOTE : - DEPLOYMENT OF EITHER FWD DOOR 833 OR
843 SLIDE/RAFT AND DEPLOYMENT OF
EITHER AFT DOOR 834 OR 844 SLIDE/RAFT
- ONE SAMPLE PER OPERATOR FLEET
- ALTERNATE DOOR POSITION AT NEXT
INTERVAL RECOMMENDED
Skills :
AF 1 1.20 MHrs
AMM 256200/6
AMT 256200-750-003
MRB 256200/02
See note
NT Check :
ALL 256249-01-1 DOOR 2/3 ESCAPE SLIDE 231 RFT
232
251
252
N
REMOVE DOOR 2/3 ESCAPE SLIDE INFLATION RESERVOIR FOR
HYDROSTATIC TEST
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256300/5
AMT 237300-710-026
MRB 237300/05
MRB 256300/01
I 22 500 FH
I 150 MO
ALL 256300-01-1 EVACUATION SIGNALLING EQUIPMENT 200 OPT N
OPERATIONAL CHECK OF EVAC FUNCTION
NOTE : IF INSTALLED
Skills :
AF 2 0.40 MHrs
AMM 256500/5
AMT 256500-720-001
MRB 256532/01
See note
NT Check :
ALL 256532-01-1 PORTABLE EMERGENCY BEACON TRANSMITTER 200 VCK Y
REMOVE THE EMERGENCY LOCATOR TRANSMITTER FOR WORKSHOP
TEST (BATTERY CHECK & FUNCTIONAL CHECK)
Skills :
CA 1 0.20 MHrs
AMM 256500/5
AMT 256500-710-001
MRB 256535/01
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 256535-01-1 ELT (REAR FUSELAGE) 200 OPT N
OPERATIONAL CHECK OF ELT SYSTEM BY MANUAL ACTIVATION
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256500/5
AMT 256500-720-004
MRB 256535/02
See note
NT Check :
ALL 256535-02-1 ELT (REAR FUSELAGE) 200 RAR N
REMOVE ELT FOR BATTERY REPLACEMENT AND DURING
REINSTALLATION PERFORM FUNCTIONAL CHECK OF ELT SYSTEM
INCLUDING AUTOMATIC ACTIVATION
Skills :
EL 2 1.00 MHrs
AMM 256551/2
AMT 256551-920-001
MRB 256551/01
See note
NT Check :
ALL 256551-01-1 MEGAPHONE BATTERIES 200 DIS Y
DISCARD MEGAPHONE BATTERIES
Skills :
CA 1 0.20 MHrs
AMM 256551/2
AMT 256551-710-002
MRB 256551/02
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 256551-02-1 MEGAPHONE 200 OPT N
OPERATIONAL CHECK OF MEGAPHONE
Skills :
B2 1 0.00 MHrs
CA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 256641/4
AMT 256641-920-001
MRB 256641/01
See note
NT Check :
ALL 256600-01-1 SUPPLEMENTAL LIFE RAFT 200 RST N
REMOVE SUPPLEMENTAL LIFE RAFT FOR RESTORATION
AND HYDROSTATIC TEST OF INFLATION RESERVOIR
Skills :
AF 1 0.40 MHrs
AMM 256652/4
AMT 256652-920-001
MRB 256652/01
See note
NT Check :
ALL 256652-01-1 LIFE VESTS 200 RST Y
RESTORATION OF LIFE VESTS
Skills :
AF 1 1.00 MHrs
AD 2012-0134
AMM 257100/6
AMT 257100-290-001
ISB 25A1555
T 20 000 CY
I 500 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
257100-01-1 AVIONICS COMPARTMENT 127 SDI
128
Y
BORESCOPE INSPECTION OF THE 80VU RACK LOWER LATERAL
FITTINGS AND VISUAL INSPECTION OF THE UPPER FITTINGS
AND CENTRAL SHELVE FITTINGS
Skills :
NDT 1 3.25 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2012-0134
AMM 257100/6
AMT 257100-290-002
ISB 25A1555
T 20 000 CY
I 500 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
257100-02-1 AVIONICS COMPARTMENT 127 SDI
128
Y
BORESCOPE INSPECTION OF THE 80VU RACK LOWER CENTRAL
SUPPORT AND VISUAL INSPECTION OF THE UPPER FITTINGS AND CENTRAL SHELVE
FITTINGS
Skills :
NDT 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 261200-5
AMT 261200-710-001
MRB 261200/01
MRB 262100/01
I 750 FH
ALL 261200-01-1 ENGINE FIRE AND OVERHEAT DETECTION 210 OPT Y
OPERATIONAL CHECK OF LOOP/SQUIB
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 261300/5
AMT 261300-710-001
MRB 261300/01
MRB 262200/01
I 750 FH
I 6 MO
ALL 261300-01-1 APU FIRE AND OVERHEAT DETECTION 210 OPT Y
OPERATIONAL TEST OF THE APU FIRE AND OVERHEAT DETECTION SYSTEM
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 261500/6
AMT 261500-100-001
MRB 261500/03
I 11 000 FH
I 73 MO
ALL 261500-03-1 AVIONICS COMPARTMENT SMOKE DETECTION 128 CLN N
CLEAN AVIONICS SMOKE DETECTION PICCOLO TUBES
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT INITIAL INTERVAL
MAY BE USED.
Access panels :
824
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 261600/5
AMT 261600-710-001
MRB 26.16.00/01
MRB 26.23.00/02
I 750 FH
I 6 MO
ALL 261600-03-1 CARGO COMPARTMENT SMOKE DETECTION 210 OPT N
OPERATIONAL CHECK OF CARGO COMPARTMENT SMOKE
DETECTION BY PTT
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 261600/5
AMT 261600-710-003
MRB 21.28.00/06
MRB 26.16.00/02
I 750 FH
I 6 MO
ALL 261600-04-1 CARGO COMPARTMENT SMOKE DETECTION 210 OPT N
OPERATIONAL TEST OF CARGO COMPARTMENT SMOKE
DETECTION BY CFDS TO CONFIRM ISOLATION VALVE
LATCHING CIRCUIT INTEGRITY.
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMT 261615-100-001
MRB 26.16.00/05
NT Check : ALL 261600-05-1 CARGO COMPARTMENT SMOKE DETECTION 130 RST
150
160
N
REMOVE CARGO COMPARTMENT SMOKE DETECTORS FOR CLEANING
Access panels :
825 826
Skills :
AV 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 261700/5
AMT 261700-710-001
MRB 26.17.00/01
I 800 FH
I 6 MO
ALL 261700-03-1 LAVATORY SMOKE DETECTION 210 OPT N
OPERATIONAL CHECK OF LAVATORY SMOKE DETECTION BY CFDS
TO CONFIRM WARNINGS CAN BE DISPLAYED
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 261715/7
AMT 261715-100-003
CMM 261616
MRB 261700/04
NT Check : ALL 261700-04-1 LAVATORY SMOKE DETECTION 200 RST N
REMOVE SMOKE DETECTOR FOR CLEANING
Skills :
EL 1 0.30 MHrs
AMM 262100/5
AMT 262100-710-002
MRB 262100/02
I 7 500 FH
I 50 MO
ALL 262100-02-1 ENGINE FIRE EXTINGUISHING 210 OPT N
OPERATIONAL CHECK OF BOTTLE LOW PRESSURE INDICATING
CIRCUIT
Skills :
B2 1 0.00 MHrs
EL 1 0.20 MHrs
AMM 262100/5
AMT 262100-720-001
MRB 262100/03
I 15 000 FH
I 100 MO
ALL 262100-03-1 ENGINE FIRE EXTINGUISHING 415 CHK
425
N
CHECK OF FIRING CIRCUIT CONTINUITY
Access panels :
415BR 425BR
Skills :
EL 2 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262100/5
AMT 262100-720-003
MRB 262100/09
I 7 000 FH
I 48 MO
ALL 262100-04-2 ENGINE FIRE EXTINGUISHING 415 CHK
425
Y
CHECK DISTRIBUTION PIPING FOR LEAKAGE AND OBSTRUCTION
Access panels :
415BL 415BR 425BL 425BR 437AL 438AR 447AL
448AR 451AL 452AR 461AL 462AR
Skills :
B2 1 0.00 MHrs
CA 2 4.00 MHrs
AMM 262100/5
AMT 262100-710-004
MRB 262100/08
MRB 360000/06
I 15 000 FH
I 100 MO
ALL 262100-05-1 ENGINE FIRE EXTINGUISHING 210 OPT N
OPERATIONAL CHECK OF FIRE CONTROL PUSH BUTTON SWITCH
SUB FUNCTIONS RELATED TO ENGINE SHUTDOWN AND
ISOLATION
Access panels :
413DL 423DL
Skills :
EL 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262141/6
AMT 262141-280-002
MRB 262100/07
See note
NT Check :
ALL 262141-02-1 ENGINE FIRE EXTINGUISHER BOTTLES 415 RAI
425
N
HYDROSTATIC TEST OF BOTTLES INCLUDING CHECK SETTING
OF PRESSURE SWITCH
Access panels :
415BL 415BR 425BL 425BR
Skills :
CA 1 0.40 MHrs
AMM 262141/6
AMT 262141-280-001
See note
NT Check :
ALL 262141-02-1A ENGINE FIRE EXTINGUISHER BOTTLES 415 CHK
425
N
WEIGHT CHECK OF THE ENGINE FIRE EXTINGUISHER
BOTTLE (6WE1,6WE2,8WE1,8WE2)
NOTE: - THE FIRST ACCOMPLISHMENT OF THIS TASK IS NEXT
2A CHECK SINCE EFFECTIVE DATE OF AMS.
Skills :
MEC 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262141/4
AMT 262141-920-001
MRB 262100/06
See note
NT Check :
ALL 262142-01-1 ENGINE FIRE EXTIR BOTTLE CARTRIDGES 415 DIS
425
Y
DISCARD CARTRIDGE
Access panels :
415BL 415BR 425BL 425BR
Skills :
EL 1 0.50 MHrs
AMM 262200/5
AMT 262200-710-002
MRB 23.42.00/01
MRB 26.22.00/02
MRB 28.29.00/01
MRB 28.29.00/03
MRB 49.62.00/01-13
MRB 49.62.00/01-32
MRB 49.62.00/01-36
MRB 49.62.00/03-13
MRB 49.62.00/03-32
MRB 49.62.00/03-36
I 3 000 FH
I 20 MO
ALL 262200-02-1 APU FIRE EXTINGUISHING 210 OPT N
OPERATIONAL CHECK OF AUTOMATIC FIRE EXTINGUISHING
CIRCUIT AND TEST APU LP FUEL VALVE OPERATION USING
EACH INDIVIDUAL MOTOR IN TURN AND TEST APU EMERGENCY
SHUTDOWN CIRCUIT
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262200/5
AMT 262200-720-001
MRB 262200/07
I 15 000 FH
I 100 MO
ALL 262200-03-1 APU FIRE EXTINGUISHING 210 CHK N
CHECK FIRING CIRCUIT CONTINUITY
Access panels :
314AR
Skills :
EL 2 0.40 MHrs
AMM 262200/6
AMT 262200-210-001
MRB 262200/05
I 15 000 FH
I 100 MO
ALL 262200-04-1 APU FIRE EXTINGUISHING 313 DI N
DETAILED INSPECTION OF DISTRIBUTION PIPING
Access panels :
314AR
Skills :
AF 1 0.20 MHrs
AMM 262200/5
AMT 262200-710-003
MRB 262200/06
I 15 000 FH
I 100 MO
OPERATIONAL CHECK OF LOW PRESSURE INDICATING CIRCUIT
Access panels :
314AR
Skills :
EL 2 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262200/5
AMT 262200-710-004
MRB 26.22.00/09
MRB 49.62.00/02-13
MRB 49.62.00/02-32
MRB 49.62.00/02-36
I 24 000 FH
I 80 MO
OPERATIONAL CHECK OF APU FIRE PUSH BUTTON SWITCH
FUNCTIONS (IN SINGLE CHANNEL CONFIGURATION) AND TEST
APU LP FUEL VALVE OPERATION USING EACH INDIVIDUAL
MOTOR IN TURN AND TEST APU EMERGENCY SHUTDOWN CIRCUIT
Skills :
EL 1 0.30 MHrs
AMM 262241/6
AMT 262241-280-002
MRB 262200/03
See note
NT Check :
ALL 262241-01-1 APU FIRE EXTINGUISHER BOTTLE 313 RAI N
HYDROSTATIC TEST OF BOTTLE INCLUDING CHECK OF
Access panels :
314AR
Skills :
CA 1 0.40 MHrs
AMM 262200/4
AMT 262200-040-004-1
See note
NT Check :
ALL 262241-01-1A APU FIRE EXTINGUISHER BOTTLE 313 CHK N
WEIGHT CHECK OF THE APU FIRE EXTINGUISHER
BOTTLE (11WF)
NOTE : - THE FIRST ACCOMPLISHMENT OF THIS TASK IS NEXT
2A CHECK SINCE EFFECTIVE DATE OF AMS.
Skills :
MEC 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262242/4
AMT 262242-920-001
MRB 262200/04
See note
NT Check :
ALL 262242-01-1 APU FIRE EXTIN BOTTLE CARTRIDGE 313 DIS Y
DISCARD CARTRIDGE
Access panels :
314AR
Skills :
EL 1 0.50 MHrs
AMM 262341/4
AMT 262341-920-001
MRB 262300/05
See note
NT Check :
ALL 262300-04-3 CARGO COMPARTMENT FIRE EXTINGUISHING 132 DIS N
REMOVE AND DISCARD CARGO COMPARTMENT FIRE
EXTINGUISHER BOTTLE CARTRIDGES
Skills :
AF 1 0.40 MHrs
AMM 262341/6
AMT 262341-280-001
MRB 26.23.00/01
I 22 500 FH
I 72 MO
ALL 262341-01-2 CARGO COMPARTMENT FIRE EXTIR BOTTLE 132 FUC N
REMOVE CARGO COMPARTMENT FIRE EXTINGUISHER BOTTLE
FOR WEIGHT CHECK
Access panels :
132MW 825
Skills :
CA 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 262341/6
AMT 262341-280-002
MRB 26.23.00/02
MRB 26.23.00/06
See note
NT Check :
ALL 262341-02-2 CARGO COMPARTMENT FIRE EXTIR BOTTLE 132 FUC N
REMOVE CARGO COMPARTMENT FIRE EXTINGUISHER
BOTTLE FOR HYDROSTATIC TEST AND CHECK OF
Access panels :
132MW 825
Skills :
CA 1 0.40 MHrs
AMM 262400/6
AMT 262400-210-002
MRB 262400/01
I 750 FH
I 6 MO
See note
ALL 262441-01-1 PORTABLE FIRE EXTINGUISHER BOTTLES 200 CHK N
CHECK PRESSURE GAUGE READING
NOTE: IF EXTINGUISHER WITH PRESSURE GAUGE IS INSTALLED
Skills :
B2 1 0.00 MHrs
CA 1 0.10 MHrs
AMM 262400/6
AMT 262400-280-001
MRB 262400/02
See note
NT Check :
ALL 262441-02-1 PORTABLE FIRE EXTINGUISHER BOTTLES 200 RAI Y
HYDROSTATIC TEST OF BOTTLES
Skills :
CA 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
CMM 26-24-05 NT Check : ALL 262441-02-1A PERIODICAL CHECK 200 CHK N
PERIODICAL CHECK EVERY 2 YEARS
PERFORM PERIODICAL CHECK FOR FIRE EXTINGUISHER AS PER CMM 26-24-05
NOTE: APPLICABILITY FOR PN: 74-20; 0074-20
INCASE OF OVERDUE TASK WHEN AMS ISSUE 14 AMD 00 IS EFFECTIVE, THE TASK
THRESHOLD IS NEXT 2A CHECK.
AMM 262500/6
AMT 262500-200-002
MRB 262500/01
I 48 MO
2C Check :
ALL 262541-01-1 LAVATORY FIRE EXTINGUISHER 200 GVI Y
GENERAL VISUAL INSPECTION OF LAVATORY FIRE
EXTINGUISHER FOR SIGNS OF LEAKAGE/DISCHARGE
Skills :
AF 1 0.20 MHrs
AMM 262500/6
AMT 262500-200-003
MRB 262500/02
NT Check : ALL 262541-02-1 LAVATORY FIRE EXTINGUISHER BOTTLE 200 FUC N
REMOVE LAVATORY FIRE EXTINGUISHER BOTTLE
FOR WEIGHT CHECK
Skills :
CA 1 0.40 MHrs
AMT 262500-200-005
MRB 26.25.00/04
I 24 MO
C Check :
ALL 262541-04-1 LAVATORY FIRE EXTINGUISHING 200 VCK N
VISUAL CHECK OF FIRE EXTINGUISHER BOTTLE PRESSURE
READING
Skills :
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 271400/6
AMT 271400-220-001
MRB 271400/04
I 18 000 FH
I 120 MO
ALL 271400-02-2 AILERON AND HYDRAULIC ACTUATION 575 CHK
675
N R
CHECK AILERON SERVOCONTROL AND HINGE BEARINGS
FOR EXCESSIVE PLAY AND CONDITION
NOTE: RII TASK
Access panels :
575KB 575MB 590AB 590BB 675KB 675MB 690AB
690BB
Skills :
AF 2 4.00 MHrs
AMM 272200/5
AMT 272200-710-001
MRB 272100/01
I 1 500 FH
I 12 MO
ALL 272100-01-1 RUDDER MECHANICAL CONTROL 210 OPT N
OPERATIONAL CHECK OF RESET FUNCTION
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 272100/6
AMT 272100-210-002
MRB 272100/03
I 24 000 FH
I 72 MO
ALL 272100-02-1 RUDDER MECHANICAL CONTROL 100 DI Y
DETAILED INSPECTION OF RUDDER MECHANICAL CONTROL
CABLES -INCLUDING ZONE 311-
Access panels :
131AC 131BC 131CC 131PW 151AC 151BC 151CC
151DC 161AC 161BC 162DW 241FF 241KF 312AR
812 824 825 826
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 272100/6
AMT 272100-220-001
MRB 272100/03
I 24 000 FH
I 72 MO
ALL 272100-03-1 RUDDER MECHANICAL CONTROL 145 FUC N R
CHECK TENSION OF RUDDER MECHANICAL CONTROL
CABLES USING TENSIOMETER
NOTE: RII TASK
Access panels :
131BC 811 825
Skills :
AF 1 0.10 MHrs
AMM 272641/6
AMT 272641-280-001
MRB 272100/04
I 24 000 FH
I 156 MO
ALL 272100-04-1 RUDDER MECHANICAL CONTROL 325 RFT N
REMOVE YAW DAMPER SPRING ROD FOR WORKSHOP CHECK
Access panels :
325BL
Skills :
AF 1 0.20 MHrs
AMM 272100/5
AMT 272100-710-001
MRB 272100/05
I 18 000 FH
I 72 MO
ALL 272100-05-1 RUDDER MECHANICAL CONTROL 210 OPT Y
OPERATIONAL CHECK OF CENTERING SPRING ROD
Access panels :
325CL 325CR
Skills :
AF 2 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 272100/6
AMT 272100-210-003
MRB 272100/07
I 18 000 FH
I 72 MO
ALL 272100-07-1 RUDDER MECHANICAL CONTROL 325 DI Y
DETAILED INSPECTION OF MECHANICAL CONTROL LINKAGE IN
FIN
Access panels :
325AL 325AR 325BL 325BR 325CL 325CR 325DL
325DR
Skills :
AF 1 0.30 MHrs
AMM 272143/3
AMT 272143-600-001
MRB 272100/09
I 20 MO
ALL 272100-08-1 RUDDER MECHANICAL CONTROL 210 LUB N
LUBRICATION OF RUDDER PEDALS ADJUSTMENT
MECHANISM
NOTE: RII TASK
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 272149/6
AMT 272149-200-001
MRB 27.21.00/10
I 24 000 FH
I 80 MO
ALL 272100-10-1 RUDDER MECHANICAL CONTROL 320 FUC N
FUNCTIONAL CHECK OF RUDDER SERVOCONTROL ACTUATING
SPRING RODS
Access panels :
325BL 325BR 325CL 325CR 325DL 325DR 325EL
325ER
Skills :
AF 2 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 272100-220-004
MRB 27.21.00/11
I 24 000 FH
I 80 MO
ALL 272100-11-1 RUDDER MECHANICAL CONTROL 325 DI N
DETAILED INSPECTION OF RUDDER SERVOCONTROL ACTUATING
SPRING RODS AND RUDDER SERVOCONTROL FEEDBACK ROD
ATTACHMENTS
Access panels :
325CL
Skills :
AF 1 0.50 MHrs
AMM 272100/6
AMT 272100-220-002
MRB 272100/02
I 40 MO
ALL 272145-01-1 RUDDER CABLE TENSION REGULATOR 125 CHK N R
CHECK TENSION REGULATOR POINTER IS WITHIN THE LIMITS
NOTE: RII TASK
Access panels :
811
Skills :
AF 1 0.02 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 272400/5
AMT 272400-710-002
MRB 27.24.00/01
MRB 29.10.00/15
MRB 29.30.00/01
MRB 29.30.00/02
I 750 FH
I 6 MO
ALL 272400-01-1 RUDDER HYDRAULIC ACTUATION 210 OPT N
OPERATIONAL CHECK OF RUDDER SERVOCONTROLS WITH
INDIVIDUAL HYDRAULIC SYSTEMS
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 272400/6
AMT 272400-200-001
MRB 272400/02
I 18 000 FH
I 120 MO
ALL 272400-02-1 RUDDER HYDRAULIC ACTUATION 325 CHK N
CHECK RUDDER SERVO CONTROL AND HINGE BEARINGS
Access panels :
325BL 325CL 325DL 325EL
Skills :
AF 2 2.00 MHrs
AMM 122255-640-001
AMT 122255/3
MRB 272400/03
I 5 500 FH
I 15 MO
ALL 272400-03-1 RUDDER HYDRAULIC ACTUATION 325 LUB N
LUBRICATION OF RUDDER HINGE BEARING NO 6
NOTE: ALTERNATIVELY MPD TASK 272400-05-1 CAN BE APPLIED.
Access panels :
325DL 325DR
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2001-16-09
AD 2010-02-09
AMM 273400/6
AMT 273400-200-001
EAD 2007-0163
MRB 273400/03
I 12 000 FH
I 20 MO
ALL 273400-02-1 ELEVATOR AND HYDRAULIC ACTUATION 334 FUC
344
N
CHECK ELEVATOR SERVO CONTROL AND HINGE BEARINGS
Access panels :
334BB 334DB 334FB 334HB 344BB 344DB 344FB
344HB
Skills :
AF 2 4.00 MHrs
B2 1 0.00 MHrs
AMM 273400/6
AMT 273400-220-002
MRB 273400/04
I 24 000 FH
I 160 MO
ALL 273400-04-2 ELEVATOR AND HYDRAULIC ACTUATION 334 VCK
344
Y
CHECK OF THE DIFFERENTIAL PRESSURE INDICATOR AND
POSITION OF FLUID RESERVE PISTON OF ELEVATOR
SERVO CONTROLS
Access panels :
334DB 344DB
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 273400-200-003
SIL 27-152
I 80 MO
ALL 273400-06-1 ELEVATOR AND HYDRAULIC ACTUATION 334 CHK
344
Y R
CHECK OF ELEVATOR NEUTRAL POSITION AND SERVO CONTROLS
INSTALLATION
NOTE: RII TASK
Access panels :
334DB 344DB
Skills :
AF 1 8.00 MHrs
AD 2010-0046 01
EAD 2010-0046
FAD 2011-1904
ISB 27A1186
I 5 000 CY
ALL 273400-07-1 ELEVATOR AND HYDRAULIC ACTUATION 334 SDI
344
Y
SPECIAL DETAILED INSPECTION OF ELEVATOR SERVOCONTROL
ROD EYE-ENDS
NOTE 1: REFER TO EASA AD 2010-0046/FAA AD 2011-19-04 AND ISB
27A1186 FOR IMPLEMENTATION PERIODS AND TIME UNTIL
FIRST REPEAT ON SERVICE AIRCRAFT
NOTE 2: RII TASK
Access panels :
334DB 344DB
Skills :
NDT 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122253/3
AMT 122253-640-001
MRB 274000/04
I 5 500 FH
I 15 MO
ALL 274000-01-1 TRIMMABLE HORIZONTAL STABILIZER 310 LUB N
LUBRICATE THS BEARINGS AND ATTACHMENT FITTINGS WITH
GREASE MAT. NO. 04-004
NOTE: ALTERNATIVE MPD TASK 274000-07-1 CAN BE APPLIED.
Access panels :
314AR
Skills :
AF 1 1.50 MHrs
B2 1 0.00 MHrs
AMM 279600/5
AMT 279600-710-006
MRB 274000/06
I 15 000 FH
I 100 MO
OPERATIONAL CHECK OF THS ACTUATOR WITH ELECTRICAL
MOTOR NO 3
Skills :
AF 1 0.10 MHrs
AMM 274100/6
AMT 274100-210-001
MRB 274000/12
I 24 000 FH
I 72 MO
ALL 274100-01-1 THS MECHANICAL CONTROL 100 DI
310
Y
DETAILED INSPECTION OF THS MECHANICAL CONTROL
FLOOR PANELS REMOVED;
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274100/6
AMT 274100-220-002
MRB 274000/13
I 24 000 FH
I 72 MO
ALL 274100-02-1 THS MECHANICAL CONTROL 145 CHK N
CHECK THS MECHANICAL CONTROL CABLES FOR CORRECT
TENSION
Access panels :
241FF
Skills :
AF 1 0.20 MHrs
AMM 122227/3
AMT 122227-640-007
MRB 274000/20
I 11 000 FH
I 30 MO
ALL 274100-03-1 THS MECHANICAL CONTROL 120 LUB
310
N
LUBRICATION OF THS MECHANICAL CONTROL CHAINS AND REAR CABLE (AREA OF
TENSION REGULATOR).
Access panels :
312AR 811
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274100/6
AMT 274100-220-001
MRB 274000/07
I 40 MO
ALL 274142-01-1 THS TRIM CTL CABLE TENSION COMPENSATOR 310 CHK N
CHECK POINTER ON TENSION COMPENSATOR SCALE WITHIN
LIMITS
Access panels :
312AR
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
AMM 274454/5
AMT 274454-720-001
MRB 274000/14
I 24 000 FH
I 160 MO
ALL 274400-01-1 THS HYDRAULIC ACTUATION 310 FNT N
FUNCTIONAL CHECK OF THS ACTUATOR PRESSURE OFF BRAKE
(APPLY TORQUE TO MANUAL CRANKING INPUT)
Access panels :
312AR
Skills :
AF 1 0.30 MHrs
AMM 274100/5
AMT 274100-720-001
MRB 274000/15
I 24 000 FH
I 160 MO
ALL 274400-02-1 THS HYDRAULIC ACTUATION 310 FNT N
FUNCTIONAL CHECK OF THS ACTUATOR OVER FULL TRAVEL
RANGE BY REFERENCE TO MECHANICAL INDICATOR
Skills :
AF 2 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274451/5
AMT 274451-710-001
MRB 274000/18
I 18 000 FH
I 120 MO
ALL 274400-03-1 THS ACTUATOR 310 OPT Y
OPERATIONAL CHECK OF THS ACTUATOR NO-BACK DEVICE
Access panels :
312AR
Skills :
AF 1 0.30 MHrs
AMM 122227/3
AMT 122227-640-003
MRB 274000/03
I 1 600 FH
I 12 MO
ALL 274451-01-1 THS ACTUATOR BALL SCREW NUT 310 LUB Y
LUBRICATE THS ACTUATOR BALL SCREW NUT
Access panels :
312AR
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 274451/6
AMT 274451-210-004
MRB 274000/05
I 3 000 FH
I 24 MO
CHECK OIL LEVEL OF THS ACTUATOR GEARBOX
Access panels :
312AR
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274451/6
AMT 274451-210-003
MRB 274000/08
I 12 000 FH
I 80 MO
CHECK INDICATOR OF THS ACTUATOR NO-BACK WEAR
DETECTION DEVICE
Access panels :
312AR
Skills :
AF 1 0.02 MHrs
AMM 274451/6
AMT 274451-220-001
MRB 274000/09
I 12 000 FH
I 80 MO
ALL 274451-04-1 THS ACTUATOR 310 DI Y
DETAILED INSPECTION OF THS ACTUATOR BALL SCREW NUT
BODY AND SCREW AND CLAW STOPS
Access panels :
312AR
Skills :
AF 1 0.15 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274451/6
AMT 274451-220-002
MRB 274000/10
I 12 000 FH
I 40 MO
See note
ALL 274451-05-1 THS ACTUATOR 310 DI Y
DETAILED INSPECTION OF UPPER AND LOWER THS ACTUATOR
ATTACHMENT (PRIMARY AND SECONDARY)
.
NOTE: ENSURE THAT INSPECTIONS ACCORDING 274451-10-1
AND 274451-11-1 ARE CARRIED OUT PRIOR TO TASK
274451-05-1 (AND PRIOR TO ANY CLEANING), WHEN
PLANNED AT THE SAME TIME
Access panels :
312AR
Skills :
AF 1 0.15 MHrs
AMM 274451/6
AMT 274451-210-002
MRB 274000/11
I 12 000 FH
I 80 MO
ALL 274451-06-1 THS ACTUATOR 310 VCK Y
VISUAL CHECK OF THS ACTUATOR THREADED NUT (FAIL SAFE
NUT)
Access panels :
312AR
Skills :
AF 1 0.05 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 274451/6
AMT 274451-200-001
MRB 274000/17
I 15 000 FH
I 100 MO
ALL 274451-07-1 THS ACTUATOR 310 VCK Y
CHECK BACKLASH BETWEEN THS ACTUATOR BALL SCREW NUT
AND SCREW
Access panels :
312AR
Skills :
AF 1 0.40 MHrs
AMM 274451/6
AMT 274451-610-001
MRB 274000/21
I 18 000 FH
I 120 MO
ALL 274451-09-1 THS ACTUATOR 310 DRN N
DRAIN AND REFILL TRIMMABLE HORIZONTAL
STABILIZER ACTUATOR GEAR BOX
Access panels :
312AR
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2007-06-02(FAA)
AD 2008-0150(EASA)
AMM 274451/6
AMT 274451-220-003
ISB 27-1164
I 20 MO
ALL 274451-10-1 THS ACTUATOR 310 DI N
DETAILED INSPECTION OF THSA LOWER ATTACHMENTS FOR
SECONDARY LOAD PATH LOADING
NOTE: PERFORM INSPECTION PRIOR TO TASK 274451-05-1
(IF PLANNED AT THE SAME TIME) AND PRIOR TO ANY
CLEANING.
INTERVAL STARTING POINT IS THE AIRCRAFT FIRST FLIGHT AND NOT DELIVERY
FLIGHT
Access panels :
312AR
Skills :
AF 1 3.50 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2007-06-02(FAA)
AD 2008-0150(EASA)
AMM 274451/6
AMT 274451-220-004
ISB 27-1164
I 10 MO
DETAILED INSPECTION OF THSA UPPER ATTACHMENTS FOR
SECONDARY LOAD PATH LOADING
NOTE: PERFORM INSPECTION PRIOR TO TASK 274451-05-1
(IF PLANNED AT THE SAME TIME) AND PRIOR TO ANY
CLEANING.
INTERVAL STARTING POINT IS THE AIRCRAFT FIRST FLIGHT AND NOT DELIVERY
FLIGHT
Access panels :
312AR
Skills :
AF 1 3.50 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2012-0175
AMT 274451-220-802
ISB 27-1214
T 22 YE
I 24 MO
DETAILED INSPECTION OF THSA BALL SCREW SHAFT LOWER
SPLINES
NOTE :
- TO BE ACCOMPLISHED BEFORE ACCUMULATING 22 YEARS,
BUT NOT BEFORE 20 YEARS SINCE THSA FIRST FLIGHT.
SEE EASA AD 2012-0175 FOR DETAILS OF COMPLIANCE.
- TASK INTERVAL IS RELATED TO EQUIPMENT LEVEL
(THSA MONTH BASED) AND NOT TO A/C LEVEL.
Access panels :
312AR
Skills :
MEC 1 2.00 MHrs
AMM 275100/5
AMT 275100-710-002
MRB 275000/05
MRB 275001/05
I 8 000 FH
I 72 MO
ALL 275100-02-1 FLAPS 210 OPT N
OPERATIONAL CHECK OF FLAP INTERCONNECTING STRUT AND
FLAP DISCONNECT PROXIMITY SENSORS
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 275400/6
AMT 275400-220-006
ISB 57-1133
SIL 27-133
I 5 500 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
275100-07-1 FLAPS 581 DI
681
Y
VISUAL INSPECTION OF THE INNER FLAP DRIVE TRUNNION
CLAMP-TYPE STEEL RUBBING PADS FOR WEAR
NOTE: TASK MAY BE ACCOMPLISHED TOGETHER WITH
575221-02-1 IF INTERVAL NOT EXEEDED.
PREP. : FLAPS EXTENDED;
Access panels :
193AB 193BB 194AB 194BB 734 744
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 275117/6
AMT 275117-280-001
MRB 275000/07
MRB 275001/07
MRB 278000/05
NT Check : 2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
275117-01-1 FLAP/SLAT COMMAND SENSOR UNIT 212 RAI Y
REMOVE CSU FOR WORKSHOP CHECK OF FRICTION BRAKE
NOTE : THE INTERVAL OF THIS TASK REFER TO "A321 TIME
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 27.80.00/08
AMT 275117-280-001
MRB 27.50.00/16
MRB 27.50.01/14
I 144 MO
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
275117-01-2 FLAP/SLAT COMMAND SENSOR UNIT 212 FUC N R
REMOVE CSU FOR WORKSHOP CHECK OF FRICTION BRAKE
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5994
Skills :
AF 1 0.03 MHrs
AMM 275144/6
AMT 275144-200-001
MRB 275000/06
MRB 275001/06
I 8 000 FH
I 72 MO
ALL 275144-01-1 FLAP INTERCONNECTING STRUT 580 DI
680
Y
DETAILED INSPECTION OF INTERCONNECTING STRUT AND
ATTACHMENTS
PREP. : FLAP EXTENDED
SLATS FULLY EXTENDED
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
AMM 275400/6
AMT 275400-200-001
MRB 275000/08
MRB 275001/08
I 24 000 FH
I 80 MO
ALL 275400-01-1 FLAP TRANSMISSION ASSY 570 DI
670
Y
DETAILED INSPECTION OF TRANSMISSION ASSY
Access panels :
734
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122227/3
AMT 122227-640-004
MRB 275000/02
MRB 275001/02
I 1 800 CY
I 10 MO
ALL 275446-01-1 FLAP TRACKS 530 LUB
630
N
LUBRICATE ALL CARRIAGE ROLLERS ON ALL FLAP TRACKS
Skills :
AF 1 1.20 MHrs
B2 1 0.00 MHrs
AMM 275446-200-802
MRB 27.50.01/09
I 22 000 FH
ALL 275446-04-1 FLAP TRACKS 530 DI
630
N
FLAP TRACKS
DETAILED INSPECTION OF TRACKS, ROLLERS, SPHERICAL
BEARING AND TAB DRIVE KINEMATIC (AS FAR AS VISIBLE)
PREPARATION:"FLAPS EXTENDED SLATS FULLY EXTENDED"
Skills :
AF 1 0.04 MHrs
AMM 121327/3
AMT 121327-612-005
MRB 275000/13
MRB 275001/12
I 24 000 FH
I 72 MO
ALL 275449-06-1 ACTUATOR ASSEMBLY 575 SRV
675
N
DRAIN AND REFILL FLAP ACTUATOR ASSEMBLIES WITH
SEMI-FLUID
Skills :
AF 1 8.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 121327/3
AMT 121327-612-002
MRB 275000/03
MRB 275001/03
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 275451-01-1 FLAP POWER CONTROL UNIT 147 SVC N
REPLENISH PCU GEARBOX TO CONFIRM FLUID LEVEL
Access panels :
734
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 122227/3
AMT 122227-640-005
MRB 276400/02
I 2 000 FH
I 15 MO
ALL 276400-01-1 SPOILER AND HYDRAULIC ACTUATION 575 LUB
675
N
LUBRICATE SPOILER NO 1 TO 5 ACTUATOR ATTACHMENTS
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMM 276400/6
AMT 276400-200-001
MRB 276400/03
I 18 000 FH
I 120 MO
ALL 276400-02-1 SPOILER AND HYDRAULIC ACTUATION 575 FUC
675
N
CHECK SPOILER SERVOCONTROL BEARING AND HINGE BEARINGS
Skills :
AF 2 5.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 278400/6
AMT 278400-200-001
MRB 278000/06
I 24 000 FH
I 80 MO
ALL 278400-01-1 SLAT TRANSMISSION ASSY 147 DI
190
520
620
Y
DETAILED INSPECTION OF TRANSMISSION ASSY
Access panels :
191BB 191BT 192BT 192FB 521BT 522AB 522CB
522FB 522JB 522KB 522LB 522NB 522QB 522SB
522UB 621BT 622AB 622CB 622FB 622JB 622KB
622LB 622NB 622QB 622SB 622UB 734
Skills :
AF 1 4.00 MHrs
AMM 121327/3
AMT 121327-612-003
MRB 278000/03
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 278451-01-1 SLAT POWER CONTROL UNIT 147 SVC N
REPLENISH PCU GEARBOX TO CONFIRM FLUID LEVEL
Access panels :
734
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122227/3
AMT 122227-640-006
MRB 278000/02
I 4 500 CY
I 20 MO
ALL 278468-01-1 SLAT TRACKS 520 LUB
620
N
LUBRICATE ALL TRACK ROLLERS AND PINIONS
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMM 278400/6
AMT 278400-210-001
MRB 27.80.00/07
MRB 574206-01-1
MRB 574306-01-1
MRB 574406-01-1
MRB 574506-01-1
MRB 574606-01-1
I 22 000 FH
I 6 YE
ALL 278468-02-1 SLAT TRACKS 520 DI
620
Y
DETAILED INSPECTION OF SLAT TRACKS, ROLLER BEARINGS,
PINION BEARINGS AND CURVED RACK GEARS - AS VISIBLE.
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 123228/3
AMT 123228-281-001
MRB 281100/01
I 36 HR
ALL 281100-01-2 TANKS 190 SRV
500
600
Y
DRAIN WATER CONTENT
NOTE : DEPENDING ON OPERATING ENVIRONMENT AND
OPERATOR'S EXPERIENCE A LESS FREQUENT
INITIAL INTERVAL MAY BE USED
Access panels :
195BB 196BB
Skills :
AF 1 0.30 MHrs
AMM 281100/6
AMT 281100-200-002
MRB 281100/02
MRB 281300/02
MRB 282100/01
MRB 282500/01
I 750 FH
I 6 MO
ALL 281100-02-1 TANKS 196 CHK N
CHECK LEAK MONITOR FOR EVIDENCE OF FUEL LEAKAGE AND
CORRECT CLOSURE OF THE VALVE
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
AMM 123228/3
AMT 123228-281-003
SIL 28-079
I 1 500 FH
I 8 MO
2A Check :
ALL 281100-04-2 FUEL TANK MICROBILOGICAL CONTAMINATION 190 SVC
500
600
N
SAMPLE FUEL FOR MICROBIOLOGICAL CONTAMINATION
ANALYSIS
NOTE : INTERVAL DEPENDING ON EACH INDIVIDUAL
OPERATORS ENVIRONMENT
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 281100/6
AMT 281100-200-001
MRB 281100/03
I 160 MO
ALL 281142-01-1 TANK FLAP VALVES 540 CHK
640
N
CHECK FOR FULL AND FREE MOVEMENT OF CLACK VALVES
PREP. : TANK DEFUELING
Access panels :
540AB 640AB
Skills :
AF 2 0.40 MHrs
AMM 281200/02
AMM 281200/06
AMT 281200-210-001
I 750 FH
ALL 281200-01-1 TANK VENTING SYS 500 VCK
600
N
VISUAL CHECK OF VENT SURGE TANK BURST DISC (EXTERNAL)
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 281247/6
AMT 281247-200-001
MRB 281200/01
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 281247-01-1 NACA VENT INTAKE 550 GVI
650
Y
VISUAL CHECK OF NACA INTAKE FOR SIGNS OF BLOCKAGE
Skills :
AF 1 0.04 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 281300/6
AMT 281300-200-001
MRB 281300/01
MRB 282200/03
I 4 MO
ALL 281343-01-1 DRAIN MAST 148 VCK N
VISUAL CHECK OF DRAIN MAST FOR OBSTRUCTION
Skills :
AF 1 0.02 MHrs
B2 1 0.00 MHrs
AMT 281800-200-002
MRB 28.18.00/01
I 144 MO
ALL 281800-03-1 IGNITION PREVENTION 140 DI
540
550
640
650
Y
DETAILED INSPECTION OF TANK BONDING LEADS (SFAR88)
PREP. : 147AZ
Access panels :
148AZ 540AB 540BB 540CB 540DB 540EB 540FB
540GB 540HB 540JB 540KB 540LB 540MB 540NB
540PB 540QB 540RB 550AB 550BB 550CB 550DB
640AB 640BB 640CB 640DB 640EB 640FB 640GB
640HB 640JB 640KB 640LB 640MB 640NB 640PB
640QB 640RB 650AB 650BB 650CB 650DB
Skills :
AF 1 50.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMT 281844-210-001
MRB 28.18.00/02
I 144 MO
ALL 281800-04-1 IGNITION PREVENTION 140 GVI
540
550
640
650
Y
GENERAL VISUAL INSPECTION OF INTERNAL TANK WIRING AND
PROBE ATTACHMENTS (SFAR88)
PREP. : 147AZ
Access panels :
148AZ 540AB 540BB 540CB 540DB 540EB 540FB
540GB 540HB 540JB 540KB 540LB 540MB 540NB
540PB 540QB 540RB 550AB 550BB 550CB 550DB
640AB 640BB 640CB 640DB 640EB 640FB 640GB
640HB 640JB 640KB 640LB 640MB 640NB 640PB
640QB 640RB 650AB 650BB 650CB 650DB
Skills :
AF 1 8.00 MHrs
AMT 281852-210-001
MRB 28.18.00/05
I 72 MO
138
Y
GENERAL VISUAL INSPECTION OF CENTER TANK FWD CARGO
BAY ISOLATION MATS (SFAR88)
Access panels :
131NW 131PW
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMT 281842-210-001
MRB 28.18.00/06
I 144 MO
146
Y
GENERAL VISUAL INSPECTION OF WIRING HARNESSES ABOVE
CENTER TANK (SFAR88)
Skills :
AF 1 4.30 MHrs
AMM 281841/6
AMT 281841-210-001
MRB 28.18.00/07
I 144 MO
570
620
670
Y
GENERAL VISUAL INSPECTION OF WING LEADING EDGE AND
TRAILING EDGE ELECTRICAL WIRING AND CONNECTIONS
(SFAR88)
Access panels :
521AB 521BB 521BT 521CB 521EB 521GB 521HB
522AB 522AT 522CB 522EB 522FB 522HB 522JB
522KB 522LB 522NB 522QB 522SB 522UB 572AB
572BB 573AB 573BB 573CB 573DB 573EB 573FB
574AB 574BB 575AB 575AT 575BB 575CB 575DB
575EB 575FB 575GB 575HB 575KB 575LB 575MB
621AB 621BB 621BT 621CB 621EB 621GB 621HB
622AB 622AT 622CB 622EB 622FB 622HB 622JB
622KB 622LB 622NB 622QB 622SB 622UB 672AB
672BB 673AB 673BB 673CB 673DB 673EB 673FB
674AB 674BB 675AB 675AT 675BB 675CB 675DB
675EB 675FB 675GB 675HB 675KB 675LB 675MB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMT 281843-210-001
MRB 28.18.00/08
I 144 MO
640
Y
GENERAL VISUAL INSPECTION OF WING FUEL PUMP
ELECTRICAL CONNECTIONS AND UNDERWING ELECTRICAL
SUPPLY CABLE (SFAR88)
PREP. : FUEL PUMP FAIRINGS;
Skills :
AF 1 0.20 MHrs
AMT 281851-210-001
MRB 28.18.00/09
I 144 MO
540
640
Y
GENERAL VISUAL INSPECTION OF FUEL PUMP CANISTERS
(SFAR88)
Access panels :
147AZ 148AZ 540AB 640AB
Skills :
AF 1 4.50 MHrs
AMM 282100/5
AMT 282100-710-002
MRB 282100/04
I 24 000 FH
ALL 282100-01-1 MAIN FUEL PUMP SYSTEM 210 OPT N
OPERATIONAL CHECK OF WING TANK PUMP PRESSURE SENSE
LINE CHECK VALVES
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282100/5
AMT 282100-710-008
MRB 282100/08
I 15 000 FH
I 100 MO
ALL 282100-03-1 MAIN FUEL PUMP SYSTEM 210 OPT Y
OPERATIONAL CHECK OF AIR RELEASE VALVES TO ENSURE
ADEQUATE FUEL FLOW UNDER SUCTION FEED CONDITIONS
Skills :
AF 1 0.10 MHrs
AMM 282100/5
AMT 282100-790-002
MRB 282100/02
I 7 500 FH
I 50 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
282100-05-1 FUEL PUMP SYSTEM 410 CHK
420
520
620
N
VISUAL CHECK OF PIPES, COUPLINGS AND LP VALVE
EXTERNAL TO TANK FROM FRONT SPAR TO DISCONNECT PANEL FOR
LEAKS WITH BOOSTER PUMP ON AND LP VALVE OPEN
Access panels :
413AL 413CL 413EL 414AZ 414FR 423AL 423AZ
423CL 423FL 424ER 437AL 447AL 471AL 472AR
481AL 482AR 522AB 622AB
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282100/5
AMT 282100-790-002
MRB 282100/02
I 7 500 FH
I 50 MO
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
282100-05-2 FUEL PUMP SYSTEM 410 CHK
420
520
620
N
VISUAL CHECK OF PIPES, COUPLINGS AND LP VALVE
EXTERNAL TO TANK FROM FRONT SPAR TO DISCONNECT PANEL FOR
LEAKS WITH BOOSTER PUMP ON AND LP VALVE OPEN
Access panels :
413AL 413CL 414AZ 423AL 423AZ 423CL 423CR
437AL 447AL 471AL 471AR 471BL 471BR 481AL
481AR 481BL 481BR
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 282100/6
AMT 282100-280-001
MRB 282100/09
I 24 000 FH
I 160 MO
ALL 282100-06-1 MAIN FUEL PUMP SYSTEM 540 CHK
640
N
CHECK SUCTION VALVES FOR FULL AND FREE
MOVEMENT
Skills :
AF 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282000/4
AMT 282000-960-001
SIL 28-073
I 24 000 FH
I 18 000 CY
I 80 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
282100-07-1 MAIN FUEL PUMP SYSTEM 470 DIS
480
N
DISCARD "O" RINGS ON PYLON ENGINE FUEL FEED PIPE
CONNECTORS AND REPLACE BY NEW "O" RINGS
Access panels :
414FR 423FL 471AL 472AR 481AL 482AR
Skills :
AF 2 8.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282000/4
AMT 282000-960-001
SIL 28-073
I 24 000 FH
I 18 000 CY
I 80 MO
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
282100-07-2 MAIN FUEL PUMP SYSTEM 470 DIS
480
N R
DISCARD "O" RINGS ON PYLON ENGINE FUEL FEED PIPE
CONNECTORS AND REPLACE BY NEW "O" RINGS
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
471AL 471AR 471BL 471BR 481AL 481AR 481BL
481BR
Skills :
AF 2 8.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMT 282100-720-802 I 144 MO
ALL 282100-10-1 MAIN FUEL PUMP SYSTEM 540 FUC
640
N
REMOVE AIR RELEASE VALVE FOR FUNCTIONAL CHECK OF
FLOAT
AMD 00 EFFECTIVE DATE IS NEXT C CHECK.
Access panels :
540CB 640CB
AMM 282200/5
AMT 282200-210-001
MRB 282200/01
I 750 FH
ALL 282200-02-1 APU FUEL PUMP SYSTEM 148 CHK N
CHECK FOR LEAKAGE FROM SHROUD DRAIN MAST AND APU
COMPARTMENT DRAIN MAST WITH APU FUEL PUMP RUNNING
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMT 282300-720-001
MRB 28.23.00/01
I 7 500 FH
I 50 MO
ALL 282300-01-2 CROSSFEED SYSTEM 210 OPT Y
CROSSFEED SYSTEM
OPERATIONAL CHECK OF CROSSFEED VALVE USING INDIVIDUAL
MOTORS AND CHECK FUEL FLOW IN "OPEN" AND FUEL SHUT
OFF IN "CLOSED" POSITIONS
Access panels :
734
Skills :
MEC 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282400/5
AMT 282400-790-003
MRB 282400/01
I 15 000 FH
I 100 MO
See note
ALL 282400-01-1 ENGINE LOW PRESSURE SHUT OFF 210 OPT N
OPERATIONAL CHECK OF LP SHUT OFF VALVES AND THEIR
CONTROLS TO ENSURE NO FLOW WHEN SELECTED CLOSED WITH
BOOSTER PUMP ON
NOTE : TASK MAY BE PERFORMED AT OPPOTUNITY OF ENGINE
REMOVAL PROVIDED INTERVAL NOT EXCEEDED
Skills :
AF 1 0.10 MHrs
AMM 282541/6
AMT 282541-200-001
MRB 282500/02
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 282541-01-2 COUPLING REFUEL/DEFUEL 522 DI
622
Y
DETAILED INSPECTION OF COUPLING REFUEL/DEFUEL.
Access panels :
522HB 622HB
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 282600/6
AMT 282600-210-001
MRB 282600/01
I 66 MO
ALL 282600-01-1 MAIN TRANSFER SYSTEM 540 CHK
640
N
MANUALLY OPERATE THE TRANSFER SYSTEM DISCHARGE
CHECK VALVE ON RIB 1 AND CHECK FOR FULL AND
FREE MOVEMENT
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/6
AMT 282800-200-003
MRB 282800/01
I 750 FH
I 6 MO
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-01-1 ADDITIONAL CENTER TANK TRANSFER SYSTEM 190 OPC N
OPERATIONAL CHECK OF LEAK MONITOR FOR EVIDENCE OF
FUEL LEAKAGE
NOTE: IF NO ACT(S) ARE FITTED WHEN TASK BECOMES DUE,
TASK MAY BE POSTPONED UNTIL NEXT ACT
INSTALLATION.
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 123228/3
AMT 123228-281-005
MRB 282800/03
I 4 MO
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-03-1 ADDITIONAL CENTER TANK TRANSFER SYS 190 OPT N
OPERATE WATER DRAIN VALVE IN ACT TO DRAIN
ACCUMULATE WATER
NOTE: DEPENDING ON OPERATING ENVIRONMENTAND OPERATORS EXPERIENCE, A LESS
FREQUENT OR MORE FREQUENT INITIAL INTERVAL
MAY BE USED.
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/5
AMT 282800-710-002
MRB 282800/4
I 22 500 FH
I 150 MO
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
OPERATE CHECK OF MOTOR 1 OF TRANSFER VALVE
INSTALLATION.
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/5
AMT 282800-710-001
MRB 282800/13
I 22 500 FH
I 150 MO
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-05-2 ADDITIONAL CENTER TANK TRANSFER SYSTEM 210 OPC N
OPERATIONAL CHECK OF THE ACT MANUAL TRANSFER SYSTEM
NOTE:- IF NO ACT(S) ARE FITTED WHEN TASK BECOMES DUE,
INSTALLATION.
- TASK IS INCLUDED IN THE ACT INSTALLATION
PROCEDURE. CREDIT CAN BE TAKEN FOR
ACCOMPLISHMENT OF THE TASK AT THIS OPPORTUNITY
Skills :
AF 2 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282839/4
AMT 282839-920-001
MRB 282800/06
I 15 000 FH
I 100 MO
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-06-2 ADDITIONAL CENTER TANK TRANSFER SYS 150 DIS N
REPLACE ACT AIR INLET FILTER
NOTE : IF NO ACT(S) ARE FITTED WHEN TASK BECOMES DUE,
INSTALLATION.
Access panels :
152YW
Skills :
AF 1 0.25 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/5
AMT 282800-720-001
MRB 282800/7
I 22 500 FH
I 150 MO
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-07-1 ADDITIONAL CENTER TANK TRANSFER SYS 150 FUC N
FUNCTIONAL CHECK OF ACT PRESSURE REDUCING VALVE
INSTALLATION.
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/5
AMT 282800-720-002
MRB 282800/08
I 72 MO
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
OPERATIONAL CHECK OF ACT INWARD RELIEF VALVE
NOTE:- IF NO ACT(S) ARE FITTED WHEN TASK BECOMES DUE,
INSTALLATION.
- ACT SERIAL NUMBER TO BE TRACKED SINCE TASK
ACCOMPLISHMENT IS A FUNCTION OF ACT AGE AND
NOT AIRCRAFT AGE.
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/6
AMT 282800-200-002
MRB 282800/09
I 750 FH
I 6 MO
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-09-1 ADDITIONAL CENTER TANK TRANSFER SYS 150 GVI N
GENERAL VISUAL INSPECTION OF THE INTEGRATED IMPACT
WALL(S) (IF INSTALLED)
Skills :
AF 1 0.16 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 281100/5
AMT 281100-790-011
MRB 282800/12
I 5 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
282800-18-1 ADDITIONAL CENTER TANK TRANSFER SYSTEM 150 FUC N
FUNCTIONAL CHECK OF THE VENT/TRANSFER PIPE
SHROUDS AND ACT DRAIN PIPE CONNECTORS
INSTALLATION.
Access panels :
241EF 241JF
Skills :
AF 1 0.67 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282900/5
AMT 282900-710-002
MRB 282900/02
I 24 000 FH
I 160 MO
ALL 282900-02-1 APU LOW PRESSURE FUEL SHUT OFF 210 CHK N
OPERATIONAL CHECK OF APU LP FUEL VALVE FOR EVIDENCE
OF INTERNAL LEAKAGE WITH LEFT WING TANK PUMP ON
Access panels :
315AL
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 291000/6
AMT 291000-200-006
MRB 291000/06
MRB 291000/28
I 1 000 FH
I 12 MO
ALL 290000-03-1 HYDRAULIC POWER 435 CHK
445
Y
CHECK CLOGGING INDICATOR ON ENGINE DRIVEN PUMP (EDP) CASE
DRAIN FILTER (POP OUT NOT PROTRUDING).
Access panels :
437AL 447AL
Skills :
AF 1 0.02 MHrs
B2 1 0.00 MHrs
AMM 291000/6
AMT 291000-210-002
MRB 291000/28
I 1 000 FH
I 12 MO
ALL 290000-05-1 HYDRAULIC POWER 100 VCK N
CHECK CLOGGING INDICATORS OF THE FOLLOWING
FILTERS(POP OUT NOT PROTRUDING)
-HIGH PRESSURE DELIVERY
-GROUND SERVICING (RESERVOIR FILLING)
-RETURN (LOW PRESSURE)
-BLUE HYDRAULIC SYSTEM ELECTRICAL PUMP CASE
DRAIN
-RESERVOIR PRESSURIZATION FILTER
-WATER SEPARATOR
Access panels :
195BB 196BB 197CB 197FB 734
Skills :
AF 1 0.06 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 291000-200-025
SIL 29-064
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 290000-07-1 HYDRAULIC SYSTEM SEALS 100 VCK N
VISUAL CHECK OF HIGH AND LOW PRESSURE MANIFOLDS AND
GROUND SERVICE PANELS AND MANIFOLDS FOR SIGNS OF
EXTERNAL LEAKAGE.
Skills :
AF 1 0.06 MHrs
B2 1 0.00 MHrs
AMM 291000/6
AMT 291000-200-001
MRB 291000/01
I 750 FH
I 6 MO
ALL 291000-01-1 MAIN HYDRAULIC POWER 100 VCK N
CHECK FLUID LEVEL ON RESERVOIR INDICATORS
Access panels :
196BB 197FB 744
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 291000/6
AMT 291000-200-002
MRB 291000/02
I 750 FH
I 6 MO
ALL 291000-02-1 MAIN HYDRAULIC POWER 100 CHK N
CHECK RESERVOIR AIR PRESSURE ON RESERVOIR GAUGE
Access panels :
196BB 197FB 744
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 292300/5
AMT 292300-710-002
MRB 291000/38
I 22 000 FH
I 144 MO
ALL 291000-04-1 MAIN HYDRAULIC POWER 210 FUC N
FUNCTIONAL CHECK OF PTU GREEN TO YELLOW
Skills :
AF 1 0.10 MHrs
AMM 291400/3
AMT 291400-680-001
MRB 291000/13
I 2 250 FH
I 24 MO
ALL 291000-05-1 MAIN HYDRAULIC POWER 195 DRN Y
DRAIN WATER SEPARATOR
Access panels :
195BB
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
AMM 292300/5
AMT 292300-710-003
MRB 291000/37
I 7 500 FH
I 50 MO
FUNCTIONAL CHECK OF PTU YELLOW TO GREEN
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 291000/5
AMT 291000-720-002
MRB 291000/19
I 36 000 FH
I 144 MO
ALL 291000-08-1 MAIN HYDRAULIC POWER 210 FNT N
FUNCTIONAL CHECK OF PRIORITY VALVES IN GREEN, BLUE
AND YELLOW SYSTEM
Skills :
AF 2 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 291000/5
AMT 291000-710-001
MRB 291000/14
I 10 000 FH
I 72 MO
ALL 291000-09-1 MAIN HYDRAULIC POWER 210 OPT N
OPERATIONAL CHECK OF HYDRAULIC FIRE SHUT OFF
VALVES AND ASSOCIATED INDICATING SYSTEM.
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 291000/5
AMT 291000-720-001
MRB 291000/20
I 16 000 FH
I 144 MO
See note
ALL 291000-10-1 MAIN HYDRAULIC POWER 574 FNT
674
Y
FUNCTIONAL CHECK OF HYDRAULIC FIRE SHUT OFF VALVES
NOTE : TASK MAY BE PERFORMED AT OPPOTUNITY OF ENGINE
Access panels :
574AB 674AB
Skills :
AF 2 0.80 MHrs
AMM 291000/6
AMT 291000-200-008
MRB 291000/22
SIL 29-092
I 600 FH
I 6 MO
CHECK NITROGEN CHARGE PRESSURE ON HYDRAULIC
POWER ACCUMULATORS.
Access panels :
196BB 744
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 123229/3
AMT 123229-281-001
MRB 291000/23
SIL 29-081
I 7 500 FH
I 24 MO
See note
ALL 291000-15-1 MAIN HYDRAULIC POWER 100 DI Y
ANALYZE HYDRAULIC FLUID
NOTE : DEPENDING ON OPERATING ENVIRONMENT AND OPERATORS EXPERIENCE, A LESS
FREQUENT OR MORE FREQUENT FREQUENT
INITIAL INTERVAL MAY BE USED
Access panels :
734 744
Skills :
AF 1 0.30 MHrs
AMM 291700/3
AMT 291700-680-001
MRB 291000/32
I 1 500 FH
I 12 MO
ALL 291000-18-1 MAIN HYDRAULIC POWER 148 SVC Y
DRAIN RECOVERY TANK
Access panels :
734 744
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 292300-710-006
MRB 29.10.00/35
I 7 500 FH
I 50 MO
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
291000-19-1 MAIN/AUXILIARY POWER 210 OPC Y R
OPERATIONAL CHECK OF PTU INHIBITION LOGIC
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
196BB 734 744
Skills :
EL 1 0.75 MHrs
AMT 291000-710-004
MRB 29.10.00/36
I 24 MO
ALL 291000-20-1 MAIN/AUXILIARY POWER 210 OPC Y
OPERATIONAL CHECK OF EDP DEPESSURIZATION
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
AMM 291200/5
AMT 291200-710-001
MRB 291000/10
I 7 500 FH
I 50 MO
ALL 291200-01-1 BLUE MAIN HYDRAULIC POWER 210 FNT N
FUNCTIONAL CHECK OF BLUE ELECTRICAL PUMP PRESSURE BY
READING ECAM INDICATION
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 291000/6
AMT 291000-220-001
MRB 291000/18
I 24 000 FH
I 144 MO
ALL 291900-01-1 GROUND INTERNAL LEAK TEST SYSTEM 210 FNT N
FUNCTIONAL CHECK TO MONITOR INTERNAL LEAK RATE OF
YELLOW AND GREEN HYDRAULIC SYSTEMS
Skills :
AF 2 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 292200/5
AMT 292200-280-002
MRB 291000/27
I 72 MO
ALL 292000-07-1 AUXILIARY HYDRAULIC POWER 190 FUC N
FUNCTIONAL CHECK OF ANTI-ICING DEVICE MAGNETS
Access panels :
197EB
Skills :
AF 2 0.20 MHrs
AMM 292251/6
AMT 292251-200-003
MRB 291000/09
I 20 MO
ALL 292251-02-1 RAM AIR TURBINE 195 DI Y
DETAILED INSPECTION OF RAM AIR TURBINE ( RAT )
ASSEMBLY AND DOORS IN DEPLOYED POSITION
PREP. : RAM AIR TURBINE EXTENSION
Access panels :
195BB 197EB
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 293100/5
AMT 293100-710-001
MRB 293000/05
I 24 000 FH
ALL 293100-01-1 HYDRAULIC FLUID QUANTITY INDICATING 190 FNT N
FUNCTIONAL CHECK OF RESERVOIR LOW LEVEL WARNING
Access panels :
197CB 197EB 198CB
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 293400/5
AMT 293400-710-001
MRB 293000/04
I 7 500 FH
I 50 MO
ALL 293400-01-1 RESERVOIR PRESSURIZATION INDICATING 210 OPT N
OPERATIONAL CHECK OF RESERVOIR LOW AIR PRESSURE
WARNING
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 30 ICE AND RAIN PROTECTION
Task
code
Threshold
Interval
Ctrl References Eff
AMM 301151/4
AMT 301151-960-001
MRB 301100/03
I 22 000 FH
ALL 301151-01-2 WING ANTI ICE CONTROL VALVE 522 DIS
622
N
REPLACE WING ANTI-ICING FILTER
NOTE: APPLICABILITY TASK: AIRCRAF EQUIPTED WITH PART NUMBER:
"P/N SAS911* OR P/N SAS912*OR P/N 38E93*"
Access panels :
522AB 622AB
Skills :
AF 1 1.00 MHrs
AMM 302100/5
AMT 302100-710-001
MRB 302100/02
I 48 MO
2C Check :
ALL 302100-01-1 ENGINE AIR INTAKE ICE PROTECTION 210 OPT N
OPERATIONAL CHECK OF ENGINE ANTI-ICE SYSTEM FAULT
WARNING
Access panels :
438AR 448AR
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 30 ICE AND RAIN PROTECTION
Task
code
Threshold
Interval
Ctrl References Eff
AMM 302149/6
AMT 302149-200-010
MRB 302100/01
I 6 000 FH
I 40 MO
ALL 302149-02-1 ENGINE AIR INTAKE ANTI-ICE DUCT 438 DI
448
N
DETAILED INSPECTION OF INLET COWL ANTI-ICE SUPPLY
DUCTS AND ASSOCIATED HARDWARE IN THE CORE COMPARTMENT
Access panels :
438AR 448AR 452AR 462AR
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
AMT 303100-720-001
SIL 34-084
I 24 MO
ALL 303100-01-1 PROBE ICE PROTECTION 120 FUC N
FUNCTIONAL CHECK OF THE INSULATION RESISTANCE OF THE
PITOT PROBE HEATER
Skills :
EL 1 0.25 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 31 INDICATING & RECORDING SYSTEMS
Task
code
Threshold
Interval
Ctrl References Eff
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 313200/2
AMT 313200-869-002
MRB 212100/01
MRB 212600/01
MRB 212800/01
MRB 213100/01
MRB 215000/01
MRB 233000/01
MRB 242000/04
MRB 244000/01
MRB 261200/02
MRB 261300/02
MRB 275000/01
MRB 275001/01
MRB 278000/01
MRB 281500/01
MRB 282800/10
MRB 284200/01
MRB 284600/01
MRB 293000/03
MRB 303100/01
MRB 304200/01
MRB 324000/04
MRB 360000/01
MRB 494000/01
MRB 494000/01-13
MRB 494000/01-32
MRB 494000/01-36
MRB 495120/01
MRB 495120/01-36
MRB 496100/01
MRB 496100/01-36
I 750 FH
I 6 MO
ALL 313000-01-1 CFDS AND DATA RECORDING SYSTEM 210 OPC N
READ CENTRALIZED FAULT DISPLAY SYSTEM (CFDS)
FOR CLASS 3 FAULTS.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
MRB 497000/01
MRB 497000/01-32
MRB 497000/01-36
MRB 499000/01
MRB 499000/01-32
MRB 499100/01
MRB 499120/01-13
MRB 499300/01
MRB 499300/01-36
MRB 730000/03
MRB 730000/03-C5
MRB 732200/01-I2
MRB 732534/01
MRB 732534/01-C5
MRB 732534/01-I2
MRB 783100/01-I2
MRB 793000/01
MRB 793000/01-I2
Skills :
B2 1 0.00 MHrs
INS 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 313355/4
AMT 313355-920-001
MRB 313300/02
MRB 313600/01
See note
NT Check :
ALL 313300-01-1 DFDR SYSTEM INTERCONNECTION 312 DIS Y
DISCARD UNDERWATER LOCATOR BEACON BATTERY
Access panels :
312AR
Skills :
INS 1 0.30 MHrs
AMM 313300/5
AMT 313300-710-015
MRB 313300/04
MRB 313600/02
See note
NT Check :
ALL 313300-03-1 DFDR SYSTEM INTERCONNECTION 312 OPT Y
OPERATIONAL CHECK OF ULB
Access panels :
312AR
Skills :
INS 1 0.15 MHrs
AMM 313300/5
AMT 313300-710-006
MRB 313300/05
MRB 313601/03
I 24 MO
ALL 313300-04-1 DFDR SYSTEM INTERCONNECTION 210 OPC N
OPERATIONAL CHECK OF DFDR VIA MCDU
Skills :
AV 1 0.25 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 313300-710-803 I 24 000 FH
I 160 MO
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
313300-07-1 DFDR SYSTEM INTERCONNECTION 121 OP N R
OPERATIONAL CHECK OF WGL-QAR INTERLOCK LOGIC
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Access panels :
824
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 316000/5
AMT 316000-740-005
MRB 316001/02
I 7 500 FH
I 50 MO
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
315000-01-1 CENTRAL WARNING SYSTEMS/ELECTRONIC 210 OPC N R
INSTRUMENT SYSTEM (EIS)
OPERATIONAL CHECK OF CORRECT OPERATION OF PFD-ND AND
ECAM-ND MANUAL TRANSFER
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
Skills :
AV 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 316000/5
AMT 316000-710-005
MRB 316001/04
I 7 500 FH
I 50 MO
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
OPERATIONAL CHECK OF CORRECT OPERATION OF EFIS AND
ECAM DMC AUTOMATIC AND MANUAL TRANSFER
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
Skills :
AV 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 316000/5
AMT 316000-710-006
MRB 316001/03
I 7 500 FH
I 50 MO
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
OPERATIONAL CHECK OF DMC3 POWER SUPPLY TRANSFER WHEN
BUSBAR 101XP IS LOST
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
Skills :
AV 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 316000/5
AMT 316000-710-002
MRB 315000/01
MRB 316000/01
I 6 000 FH
I 48 MO
2255
2261
2267
2303
2480
316000-01-1 ELECTRONIC INSTRUMENT SYSTEM 210 OPT N
OPERATIONAL CHECK OF EFIS/ECAM SWITCHING FUNCTIONS:
- MANUAL DMC 1 + 2 TO DMC 3 SWITCHING
- MANUAL PFD/ND TRANSFER
- MANUAL ECAM/ND TRANSFER
- AUTOMATIC UPPER DU/LOWER DU TRANSFER
- AUTOMATIC PFD/ND TRANSFER
Skills :
INS 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 316000/5
AMT 316000-740-002
MRB 316000/02
I 7 500 FH
I 50 MO
2255
2261
2267
2303
2480
316000-02-1 ELECTRONIC INSTRUMENT SYSTEM 210 TST N
PERFORM ELECTRONIC INSTRUMENT SYSTEM ( EIS )
INPUT TEST
AMM 316322/4
AMT 316322-400-002
SIL 31-025
I 2 400 FH
I 24 MO
2255
2261
2267
2303
2480
316322-01-1 DISPLAY UNIT 210 SWA N
REPOSITION ALL CATHODE RAY TUBES BY SWAPPING
ALL DISPLAY UNITS FROM ONE POSITION(PFD,ND,
UPPER ECAM,LOWER ECAM)TO ANOTHER
NOTE:INTERVAL MAY BE ADJUSTED IN ACCORDANCE TO
OPERATOR'S EXPERIENCE
Skills :
B2 1 0.00 MHrs
EL 1 0.25 MHrs
AMM 316322/6
AMT 316322-200-001
SIL 31-030
T 6 000 FH
T 48 MO
I 1 200 FH
I 12 MO
See note
2255
2261
2267
2303
2480
316322-02-1 DISPLAY UNIT 210 FUC N
FUNCTIONAL CHECK OF DISPLAY UNITS BRIGHTNESS
NOTE : INTERVAL MAY BE ADJUSTED IN ACCORDANCE
WITH OPERATOR'S EXPERIENCE
Skills :
B2 1 0.00 MHrs
EL 1 0.25 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122232/3
AMT 122232-640-001
MRB 32.11.00/02
MRB 32.11.00/18
MRB 32.30.00/03
I 500 CY
I 4 MO
ALL 321000-01-1 MAIN LANDING GEAR AND DOORS 731 LUB
741
N
LUBRICATION OF MAIN LANDING GEAR AND DOORS
Access panels :
734 744
Skills :
AF 2 4.00 MHrs
B2 1 0.00 MHrs
AMT 321100-220-006
MRB 32.11.00/15
I 20 000 CY
I 120 MO
ALL 321100-15-1 MAIN GEAR 731 SDI
741
N
SPECIAL DETAILED INSPECTION OF BUSHINGS AND BEARINGS
IN MLG AIRFRAME ATTACHMENT FITTINGS
PREP. : AIRCRAFT JACKING;
MAIN LANDING GEAR REMOVAL;
Access panels :
734 744
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 321111/4
AMT 321111-920-001
MRB 32.11.00/14
MRB 32.11.00/19
MRB 321105-03-1
MRB 321107-03-1
MRB 321109-02-1
MRB 321110-03-1
MRB 321111-02-1
MRB 321113-02-1
MRB 321116-02-1
MRB 321125-02-1
MRB 321128-03-1
MRB 321135-01-1
MRB 321135-02-1
MRB 321136-02-1
MRB 321140-01-1
MRB 321141-01-1
MRB 321142-01-1
MRB 321151-01-1
MRB 321152-01-1
MRB 321155-01-1
MRB 321155-01-2
MRB 321160-01-1
MRB 321162-01-1
MRB 321164-01-1
MRB 321165-01-1
MRB 321167-01-1
MRB 321168-01-1
NT Check : ALL 321111-01-2 MLG 731 SDI
741
N
SPECIAL DETAILED INSPECTION (OVERHAUL) OF MAIN GEAR
(OFF AIRCRAFT)
MAIN LANDING GEAR REMOVAL;
NOTE: RII TASK
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
734 744
Skills :
AF 0 0.00 MHrs
AMM 321111/6
AMT 321111-200-001
MRB 32.11.00/13
I 1 500 CY
I 18 MO
ALL 321111-03-1 MLG TORQUE LINK DAMPER RESERVOIR 731 FUC
741
N
CHECK OF MLG TORQUE LINK DAMPER FLUID LEVEL
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 121232/3
AMT 121232-611-004
MRB 321100/04
I 10 000 CY
I 80 MO
ALL 321113-03-1 MAIN LANDING GEAR SHOCK ABSORBER 731 FUC
741
N
CHECK OF MLG SHOCK ABSORBER FLUID LEVEL
PREP. : AIRCRAFT JACKING
Skills :
AF 2 2.00 MHrs
AMM 121432/3
AMT 121432-614-003
MRB 321100/03
I 5 000 CY
I 24 MO
ALL 321113-04-1 MAIN LANDING GEAR SHOCK ABSORBER 731 FUC
741
N
CHECK OF MLG SHOCK ABSORBER CHARGE PRESSURE
Skills :
AF 1 0.80 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 321127/6
AMT 321127-200-001
MRB 321100/05
I 10 000 CY
ALL 321127-01-1 MAIN LANDING GEAR TORQUE LINK 731 CHK
741
Y
CHECK OF MLG TORQUE LINKS FOR EXCESSIVE PLAY
Skills :
AF 1 0.40 MHrs
AMM 122232/3
AMT 122232-640-002
MRB 32.21.00/01
MRB 32.30.00/03
MRB 32.50.00/01
I 500 CY
I 4 MO
ALL 322000-01-1 NOSE LANDING GEAR AND DOORS 710 LUB N
LUBRICATION OF NOSE LANDING GEAR AND DOORS
Access panels :
713 714
Skills :
AF 2 2.80 MHrs
B2 1 0.00 MHrs
AMT 322100-200-016
MRB 32.21.00/07
I 20 000 CY
I 120 MO
ALL 322100-07-1 NOSE GEAR 710 SDI N
SPECIAL DETAILED INSPECTION OF BUSHINGS AND BEARINGS
IN NLG AIRFRAME ATTACHMENT FITTINGS.
PREP. : NLG REMOVED;
AIRCRAFT JACKING;
Access panels :
713 714
Skills :
AF 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 322111/4
AMT 322100-200-802
MRB 32.21.00/05
MRB 32.50.00/02
MRB 322105-03-1
MRB 322110-03-1
MRB 322115-03-1
MRB 322120-02-1
MRB 322130-02-1
MRB 322140-02-1
MRB 322146-01-1
MRB 322147-01-1
MRB 322148-01-1
MRB 322149-01-1
MRB 322150-01-1
MRB 322160-01-1
MRB 322161-01-1
NT Check : ALL 322111-01-1 NOSE LANDING GEAR 710 RST N
SPECIAL DETAILED INSPECTION (OVERHAUL) OF NOSE GEAR
(OFF AIRCRAFT)
PREP. : NLG REMOVED;
AIRCRAFT JACKING;
NOTE: RII TASK
Access panels :
713 714 734
Skills :
AF 3 12.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 121432/3
AMT 121232-610-002
MRB 322100/03
I 5 000 CY
I 24 MO
C Check :
ALL 322113-01-1 NOSE LANDING GEAR SHOCK ABSORBER 711 FUC N
CHECK OF NLG SHOCK ABSORBER CHARGE PRESSURE
AND FLUID LEVEL.
Access panels :
713 714
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 322100/6
AMT 322100-200-003
ISB 32-1252
MRB 322100/02
I 5 000 CY
See note
ALL 322127-01-1 NOSE LANDING GEAR TORQUE LINK 711 FUC Y
CHECK OF NLG TORQUE LINKS FOR EXCESSIVE PLAY
NOTE: INCLUDING CHECK OF TORQUE LINK APEX PIN FOR
CRACKS, WHERE APPLICABLE
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
ISB 32-1323 I 4 500 CY
I 20 MO
2255
2261
2267
2303
2480
322128-01-1 NOSE LANDING GEAR 711 GVI Y
INSPECTION FOR BARREL WEAR
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 323000-200-002
MRB 32.30.00/01
I 750 FH
I 4 MO
ALL 323000-01-1 NORMAL EXTENSION AND RETRACTION 711 DI
731
741
N
VISUAL CHECK OF NLG AND MLG DOWNLOCK SPRINGS AND
ATTACHMENTS.
Skills :
AF 1 0.40 MHrs
MEC 1 0.20 MHrs
AMT 528100-220-002
MRB 32.30.00/16
MRB 32.30.00/18
I 20 000 CY
I 120 MO
ALL 323000-16-1 NORMAL EXTENSION AND RETRACTION 711 SDI
731
741
Y
SPECIAL DETAILED INSPECTION OF MLG AND NLG DOOR HINGE
BEARINGS, ATTACHMENT LUG BUSHINGS AND PINS AND DOOR
ACTUATING CYLINDERS ATTACHMENT LUG BUSHINGS AND PINS.
Access panels :
713 714 734 744
Skills :
AF 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 323100-720-008
MRB 32.30.00/17
I 4 000 FH
I 26 MO
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
323000-17-1 NORMAL EXTENSION AND RETRACTION 210 FUC Y R
FUNCTIONAL CHECK OF LGCIU POWER SUPPLY RELAYS.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5699
5916
5958
Skills :
AF 0 0.00 MHrs
B2 1 0.00 MHrs
AMT 323100-210-002
MRB 32.30.00/19
I 750 FH
I 6 MO
ALL 323000-19-1 NORMAL EXTENSION AND RETRACTION 711 GVI
731
741
Y
GENERAL VISUAL INSPECTION OF L/G EXTENSION /
RETRACTION SYSTEM COMPONENTS
Access panels :
713 714 734 744
Skills :
AF 1 1.50 MHrs
B2 1 0.00 MHrs
AMM 326900/5
AMT 326900-740-001
MRB 323000/02
I 750 FH
I 6 MO
ALL 323100-01-1 NORMAL EXTENSION AND RETRACTION 210 VCK N
BITE CHECK OF LANDING GEAR CONTROL INTERFACE UNIT
(LGCIU) USING MCDU (TO ENSURE THAT CONTINUOUS BITE IS
OPERATIVE)
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 323100/6
AMT 323100-200-001
MRB 323000/07
I 3 500 CY
I 24 MO
ALL 323100-02-1 NORMAL EXTENSION AND RETRACTION 711 DI
731
741
Y
DETAILED INSPECTION OF GEAR UPLOCK AND DOOR UPLOCK
UNITS AND ROLLERS.
Access panels :
713 714 734 744
Skills :
AF 1 1.80 MHrs
B2 1 0.00 MHrs
AMM 323100/5
AMT 323100-710-001
MRB 323000/11
I 18 000 CY
I 144 MO
ALL 323100-03-1 NORMAL EXTENSION AND RETRACTION 210 OPT N
OPERATIONAL CHECK OF RETRACTION INHIBITION BAULK
Skills :
AF 2 0.10 MHrs
AMM 323100/5
AMT 323100-710-005
MRB 323000/12
I 15 000 FH
I 72 MO
ALL 323100-04-1 NORMAL EXTENSION AND RETRACTION 210 OPT Y
OPERATIONAL CHECK TO ENSURE SAFETY VALVE CLOSES AT
260 KTS
PREP : APU RUNNING
Skills :
AF 2 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 323000/6
AMT 323000-200-001
MRB 32.30.00/06
I 5 000 CY
I 24 MO
ALL 323100-05-1 NORMAL EXTENSION AND RETRACTION 120 DI Y
DETAILED INSPECTION OF NOSE GEAR DOOR OPERATING
MECHANISM
Access panels :
713 714
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 326100/5
AMT 326100-710-001
MRB 323000/05
I 7 500 FH
I 50 MO
ALL 323100-06-1 NORMAL EXTENSION AND RETRACTION 210 OPT N
BITE CHECK USING MCDU TO ENSURE "GEAR NOT DOWN FOR
LANDING" WARNINGS OPERATIVE
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 323122-920-001
ISB 32-1307
MRB 322152-01-1
MRB 322153-01-1
VSB 580-32-3160
I 20 000 CY
I 10 YE
ALL 323100-08-1 NORMAL EXTENSION AND RETRACTION 711 RST N
SPECIAL DETAILED INSPECTION (OVERHAUL) OF THE NOSE
LANDING GEAR ACTUATING CYLINDER AND GEAR ATTACHMENT PIN (OFF AIRCRAFT).
PREP. : ACTUATING CYLINDER - NLG;
NOTE : REFER TO APPENDIX 7 OF MPD FOR LANDING GEAR
OVERHAUL PROCEDURES DOCUMENT
NOTE : CPCP
Access panels :
713 714
Skills :
AF 2 7.00 MHrs
AMT 323100-220-002
MRB 321147-01-1
MRB 321148-01-1
MRB 321171-01-1
MRB 321172-01-1
MRB 321173-01-1
MRB 321174-01-1
I 20 000 CY
I 10 YE
ALL 323100-09-1 NORMAL EXTENSION AND RETRACTION 731 SDI
741
N
SPECIAL DETAILED INSPECTION (OVERHAUL) OF THE MAIN
LANDING GEAR RETRACTION ACTUATOR AND ATTACHMENT PINS
(OFF AIRCRAFT)
PREP. : RETRACTION ACTUATOR REMOVED.;
NOTE : CPCP
NOTE : REFER TO APPENDIX 7 OF MPD FOR LANDING GEAR
OVERHAUL PROCEDURES DOCUMENT
Access panels :
734 744
Skills :
AF 0 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 323100/6
AMT 323100-200-003
ISB 32-1298
T 25 000 CY
I 600 CY
See note
2255
2261
2267
2303
2480
323105-01-1 NORMAL EXTENSION AND RETRACTION - INSTL 731 DI
741
N
DETAILED INSPECTION OF RETRACTION ACTUATOR
NOTE: INITIAL ACCOMPLISHMENT IS RECOMMENDED AFTER
20000 FC BUT BEFORE 25000 FC FROM ENTRY INTO
SERVICE (EIS)
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2011-0069
AD 2011-13-11
AOT 32A1390
ISB 32-1390
T 800 CY
I 425 CY
2267
2480
3005
3013
3022
3198
3737
3862
4136
4213
4311
4315
4669
4737
4783
4826
4863
4945
4971
5241
5247
5251
5275
5297
5306
5340
5343
5385
323105-02-1 NORMAL EXTENSION AND RETRACTION 730 OPC
740
N R
OPERATIONAL CHECK OF THE MLG DOOR ACTUATOR
13 AMD 04 EFFECTIVE DATE IS NEXT WEEKLY CHECK
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AOT 32A1390
EAD 2011-0069
T 800 CY
I 8 DY
See note
ALL 323105-03-1 NORMAL EXTENSION AND RETRACTION 210 VCK N R
NORMAL EXTENSION AND RETRACTION
CHECK CFDS (PFR) FOR SLOW DOOR OPENING/CLOSING
MESSAGES
Skills :
AF 1 0.75 MHrs
AD 2007-0065
ISB 32-1290
T 4 500 CY
I 20 000 CY
I 89 MO
See note
2255
2261
2267
2303
323112-01-1 SELECTOR VALVE - LG 711 VCK N
INSPECTION OF SELECTOR VALVES.
NOTE 1: THRESHOLD IS 4500 CY FROM THE EFFECTIVE DATE OF
THE AD 2007-0065 (28/03/2007) BUT NOT EXCEEDING
20,800 CY FROM FIRST FLIGHT.
NOTE 2: RII TASK
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 323300/6
AMT 323300-200-002
MRB 323000/09
I 72 MO
ALL 323300-01-1 LANDING GEAR FREE FALL EXTENSION 100 DI
200
Y
DETAILED INSPECTION OF FREE-FALL MECHANISM INCLUDING
CABLES
Access panels :
131AC 131BC 131CC 132PW 211FF 211JF 241EF
241FF 241KF 241LF 241MF 242FF 242KF 242LF
242MF 713 714 734 744 822 824
825
Skills :
AF 1 1.00 MHrs
AMM 323300/5
AMT 323300-720-003
MRB 32.11.00/17
MRB 32.21.00/08
MRB 32.30.00/13
I 15 000 CY
I 80 MO
ALL 323300-03-1 LANDING GEAR FREE FALL EXTENSION 700 FNT N
FUNCTIONAL CHECK OF FREE-FALL SYSTEM
Access panels :
713 714
Skills :
AF 4 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 323300/6
AMT 323300-200-001
MRB 323000/15
I 72 MO
ALL 323300-04-1 LANDING GEAR FREE FALL EXTENSION 100 VCK N
CHECK OF FREE-FALL MECHANISM CABLE TENSION
Access panels :
131AC 241EF 242FF 242LF 713 714 734
744 822 825
Skills :
AF 1 0.05 MHrs
AMM 323300/5
AMT 323300-710-001
MRB 323000/08
I 24 MO
C Check :
ALL 323300-05-1 LANDING GEAR FREE FALL EXTENSION 210 OPT N
OPERATIONAL CHECK OF FREE-FALL MECHANICAL CONTROL
NOTE: RII TASK
Access panels :
713 714 734 744
Skills :
AF 4 0.40 MHrs
B2 1 0.00 MHrs
AMM 324200/5
AMT 324200-720-004
MRB 324000/14
I 5 000 CY
I 48 MO
ALL 324000-14-1 WHEELS AND BRAKES 210 FUC
730
744
N
FUNCTIONAL CHECK OF THE AUTOMATIC REACTIVATION OF THE
NORMAL BRAKING MODE (PARKING BRAKE APPLIED)
PREP. : HYDRAULIC GROUND POWER
Skills :
AF 2 9.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 324400-720-002
MRB 32.40.00/17
I 7 500 FH
I 5 000 CY
I 50 MO
ALL 324000-17-1 WHEELS AND BRAKES 190 FUC N
FUNCTIONAL CHECK OF BRAKE ACCUMULATOR SYSTEM.
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
AMM 324100/6
AMT 324100-210-003
MRB 324000/01
I 3 DY
ALL 324100-01-1 WHEELS 700 OPC Y
CHECK TIRE PRESSURE
Skills :
AF 1 0.10 MHrs
AMT 324200-640-001
SIL 32-130
I 2 000 CY
ALL 324100-05-1 WHEELS 730 LUB
740
Y
LUBRICATION OF MLG AXLE AND AXLE SLEEVES
PREP. : BRAKE UNIT;
MLG WHEEL;
Skills :
AF 1 0.74 MHrs
B2 1 0.00 MHrs
ISB 32-1282 T 7 500 CY
I 2 000 CY
2255
2261
2267
2303
2480
324200-03-1 LANDING GEAR WHEELS AND BRAKES 731 DI
741
Y
DETAILED INSPECTION OF THE NORMAL BRAKE MANIFOLD
PREP. : MLG FIXED LEG FAIRING;
Skills :
AF 1 6.00 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 324227/6
AMT 324227-210-003
MRB 324000/02
I 36 HR
ALL 324227-01-1 MAIN LANDING GEAR BRAKES 731 FUC
741
Y
FUNCTIONAL CHECK OF BRAKE HEAT PACK FOR WEAR BY USE OF THE WEAR INDICATOR
(PARKING BRAKE APPLIED)
NOTE : TASK ACCOMPLISHED AS PART OF OPERATORS
ROUTINE MAINTENANCE PROGRAM. DEPENDENT ON
OPERATORS EXPERIENCE, A HIGHER INITIAL
INTERVAL MAY BE USED.
Skills :
AF 1 0.02 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 324300-710-802
MRB 32.40.00/08
I 7 500 FH
I 50 MO
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
324300-01-3 ALTERNATE BRAKING SYSTEM 210 OPC N R
NOTE: TASK MAY BE ACCOMPLISHED AT BRAKE CHANGE.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Skills :
AF 1 0.20 MHrs
AMM 324200/5
AMT 324200-710-003
MRB 324000/09
I 10 000 CY
ALL 324300-02-1 ALTERNATE BRAKING SYSTEM 210 OPT N
OPERATIONAL CHECK OF ANTISKID INHIBITION
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 324311/6
AMT 324311-210-001
MRB 324000/06
I 1 500 CY
I 18 MO
2255
2261
2267
2303
2480
324311-01-1 LOW PRESSURE BRAKE RESERVOIR 122 FUC N
CHECK FLUID LEVEL OF LOW PRESSURE BRAKE
RESERVOIR
Access panels :
811
Skills :
AF 1 0.01 MHrs
B2 1 0.00 MHrs
AMM 324314/6
AMT 324314-200-002
MRB 324000/12
I 13 MO
2255
2261
2267
2303
2480
324314-01-1 ALTERNATE BRAKE DIST. - DUAL VALVE 148 RST N
DRAIN ACCUMULATED WATER FROM THE BRAKE DUAL
DISTRIBUTION VALVE (BDDV)
Access panels :
148FB 734 744
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 324411/6
AMT 324411-200-001
CMP 32-2-0000-001
MRB 32.40.00/05
I 750 FH
I 4 MO
ALL 324411-01-1 BRAKE ACCUMULATOR 148 CHK N
FUNCTIONAL CHECK OF PARKING/EMERGENCY BRAKE
ACCUMULATOR BY READING THE CHARGE PRESSURE ON THE
ACCUMULATOR GAUGE
Access panels :
744
Skills :
AF 1 0.01 MHrs
B2 1 0.00 MHrs
AMM 324500/5
AMT 324500-710-001
MRB 324000/13
SIL 32-091
I 2 000 CY
I 24 MO
ALL 324500-01-1 PARKING/ULTIMATE EMERG. BRAKING SYSTEM 148 OPT N
OPERATIONAL CHECK OF THE PARKING BRAKE SYSTEM
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
ISB 32-1279 I 7 500 FH
I 5 000 CY
2255
2261
2267
2303
2480
324500-04-1 PARKING/ULTIMATE EMERG. BRAKING SYSTEM 190 FUC N
INSPECTION OF THE ACCUMULATOR OF THE ALTERNATE
BRAKING SYSTEM FOR PRESSURE DECREASE.
NOTE: CREDIT CAN BE TAKEN FROM TASK 324500-03-3
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 324900/5
AMT 324900-720-001
MRB 324000/03
I 750 CY
I 9 MO
ALL 324900-01-1 TIRE PRESSURE INDICATING SYSTEM 210 FUC N
CROSSCHECK OF TPIS READING AND TIRE PRESSURE GAUGE
NOTE: A/C WITH TPIS INSTALLED
Skills :
AF 1 0.12 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 33 LIGHTS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 331400/5
AMT 331400-710-001
MRB 231300/02
MRB 279000/01
MRB 315000/07
MRB 331400/01
MRB 344800/03
I 750 FH
I 6 MO
ALL 331400-01-1 ANNUNCIATOR LIGHT TEST AND DIMMING 210 OPT N
OPERATIONAL CHECK OF LIGHTS TEST SYSTEM
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 335100/5
AMT 335100-710-001
MRB 335100/01
I 8 DY
ALL 335100-01-1 CABIN EMERGENCY LIGHTING 210 OPT Y
OPERATIONAL CHECK OF EMERGENCY LIGHTS
Skills :
EL 1 0.02 MHrs
AMM 335100/5
AMT 335100-710-003
MRB 335100/03
SIL 33-033
I 400 DY
ALL 335100-03-1 CABIN EMERGENCY LIGHTING 220 CHK Y
CHECK BATTERY CAPACITY
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 33 LIGHTS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 335100/5
AMT 335100-710-004
MRB 335100/05
I 15 000 FH
I 100 MO
ALL 335100-05-1 CABIN EMERGENCY LIGHTING 200 CHK N
CHECK MANUAL OPERATION FROM BOTH CONTROL PANELS AND
CHECK ALL CABIN LIGHTS AND SIGNS ILLUMINATED BY
BATTERIES
Skills :
EL 1 0.05 MHrs
AMM 335100/5
AMT 335100-720-001
MRB 335100/06
I 24 000 FH
ALL 335100-06-1 CABIN EMERGENCY LIGHTING 220 CHK N
CHECK OF DOOR SWITCH POWER SUPPLIED BY EMERGENCY
LIGHTS SYSTEM AND CHECK DOOR SWITCH OPERATION TO
ACTIVATE THE EXTERIOR LIGHTS
Skills :
EL 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 34 NAVIGATION
Task
code
Threshold
Interval
Ctrl References Eff
AMM 341300/5
AMT 341300-710-002
MRB 341300/01
I 15 000 FH
I 100 MO
ALL 341300-01-1 AIR DATA 210 OPT N
OPERATIONAL CHECK OF OVERSPEED WARNING VMO/MMO
USING CFDS.
Skills :
RA 1 0.20 MHrs
AMM 341300/5
AMT 341300-710-001
MRB 341300/02
I 15 000 FH
I 100 MO
OPERATIONAL CHECK OF AIR DATA SWITCHING FUNCTION
Skills :
RA 1 0.20 MHrs
AMM 341300/5
AMT 341300-710-007
MRB 341300/01
I 15 000 FH
I 100 MO
OPERATIONAL CHECK OF OVERSPEED WARNINGS VFE/VLE
USING CFDS.
Skills :
RA 1 0.20 MHrs
AMM 341300/5
AMT 341300-710-003
MRB 341300/04
I 7 500 FH
I 50 MO
OPERATIONAL CHECK OF ALTITUDE COMPARISON WARNING
Skills :
B2 1 0.00 MHrs
RA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 341000/5
AMT 341000-710-009
MRB 341400/03
I 12 000 FH
I 80 MO
OPERATIONAL CHECK OF THE 5-MINUTE TIME DELAY OF ADIRU
2 AND 3 POWER DISCONNECTION IN EMERGENCY
CONFIGURATION
Skills :
AV 1 0.20 MHrs
AMM 341000/3
AMT 341000-170-001
MRB 341300/06
SIL 34-3084
I 6 000 FH
I 20 MO
ALL 341300-07-1 AIR DATA 120 RST N
FLUSHING OF TOTAL PRESSURE LINES
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT INITIAL
INTERVAL
MAY BE USED.
Skills :
AV 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 341300-710-009
MRB 34.13.00/07
I 12 000 FH
I 80 MO
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
341300-09-1 AIR DATA 210 OPT N R
OPERATIONAL CHECK OF THE BACK UP SPEED SCALE DISPLAY
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Skills :
AF 1 0.20 MHrs
AMT 303100-710-007
ISB 34-1415
T 5 200 FH
I 2 000 FH
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
341300-10-1 AIR DATA 120 FUC N
FUNCTIONAL TEST OF THE HEATING OF THE THREE AOA
SENSORS
Skills :
B2 1 0.00 MHrs
EL 1 2.25 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 341000-170-004
SIL 34-084
T 5 200 FH
I 750 FH
I 4 MO
ALL 341300-11-1 AIR DATA 120 RST N
CLEANING OF 1 OUT OF 3 PITOT PROBES.
NOTE: TASK TO BE PERFORMED ALTERNATELY ON PITOT 1, 2
AND 3.
Skills :
B2 1 0.00 MHrs
AMM 341400/5
AMT 341400-710-003
MRB 341400/01
I 7 500 FH
I 50 MO
ALL 341400-01-1 ATTITUDE, HEADING AND POSITION 210 OPT N
OPERATIONAL CHECK OF ATT/HDG SWITCHING FUNCTION
Skills :
B2 1 0.00 MHrs
RA 1 0.20 MHrs
AMM 341400/5
AMT 341400-710-004
MRB 341400/02
I 7 500 FH
I 50 MO
ALL 341400-02-1 ATTITUDE, HEADING AND POSITION 210 OPT N
OPERATIONAL CHECK OF ATTITUDE AND HEADING COMPARISON
WARNING
Skills :
B2 1 0.00 MHrs
RA 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 342225-710-001
MRB 34.20.00/03
I 7 500 FH
I 50 MO
3862
3964
3966
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
342000-03-1 STANDBY NAVIGATION SYSTEM 210 OPC N R
OPERATIONAL CHECK OF ISIS DC HOT BUS SUPPLY
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5958
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 342100/5
AMT 342100-790-001
MRB 342100/01
SIL 34-084
I 12 000 FH
I 80 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
4136
342100-01-1 STANDBY ALTITUDE AND AIRSPEED 120 TST N
LOW RANGE LEAK TEST OF STANDBY PNEUMATIC CIRCUITS
Access panels :
811
Skills :
RA 2 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 341000/3
AMT 341000-170-003
MRB 342100/02
SIL 34-084
I 6 000 FH
I 20 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
342100-02-1 STANDBY DATA ALTITUDE AND AIRSPEED 120 DRN N
DRAINING AND FLUSHING OF STANDBY PNEUMATIC CIRCUITS
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT INTERVAL
MAY BE USED.
Access panels :
811 812
Skills :
RA 1 0.75 MHrs
AMM 342200/5
AMT 342200-710-001
MRB 342200/01
I 6 000 FH
I 48 MO
ALL 342200-01-1 STANDBY COMPASS 210 DI Y
OPERATIONAL CHECK OF THE STANDBY COMPASS INCLUDING
LIGHT TEST AND VISUAL CHECK
Skills :
B2 1 0.00 MHrs
RA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 342225-170-001
MRB 34.20.00/02
SIL 34-084
I 6 000 FH
I 20 MO
3862
3964
3966
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
342200-02-1 STANDBY ALTITUDE AND HEADING 120 SVC N R
DRAINING AND FLUSHING OF STANDBY PNEUMATIC CIRCUITS
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE FREQUENT INITIAL
INTERVAL MAY BE USED.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5958
Access panels :
811 812
Skills :
B2 1 0.00 MHrs
RA 1 0.75 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 342225-790-001
MRB 34.20.00/01
SIL 34-084
I 12 000 FH
I 80 MO
3862
3964
3966
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
342200-05-1 STANDBY DATA - INTEGRATED STANDBY 120 FUC N R
INSTRUMENT SYSTEM (ISIS)
LOW RANGE LEAK TEST OF STANDBY PNEUMATIC CIRCUITS
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5958
Access panels :
811
Skills :
RA 1 0.42 MHrs
AMM 344200/5
AMT 344200-750-001
MRB 344200/01
I 4 000 FH
I 48 MO
ALL 344200-01-1 RADIO ALTIMETER 152 OPT N
OPERATIONAL CHECK AND DETAILED INSPECTION FOR
CONTAMINATION OF RADIO ALTIMETER FAN
OPERATORS EXPERIENCE, A LESS FREQUENT OR MORE
FREQUENT INITIAL INTERVAL MAY BE USED.
Access panels :
152GW
Skills :
B2 1 0.00 MHrs
RA 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 344211/4
AMT 344211-920-001
SIL 34-097
I 144 MO
ALL 344200-02-1 RADIO ALTIMETER 150 DIS N
RADIO ALTIMETER ANTENNAS AND COAXIAL CABLES
REPLACEMENT.
Access panels :
151AG 151UF 152AG 152GW 152HW 152MF 152NF
Skills :
RA 1 11.42 MHrs
AMT 344211-615-001
SIL 34-099
I 6 MO
ALL 344200-03-1 RADIO ALTIMETER 150 RST N
RADIO ALTIMETER ANTENNAS EXTERNAL SURFACE CLEANING
Skills :
B2 1 0.00 MHrs
RA 1 0.00 MHrs
AMM 344800/5
AMT 344800-710-001
MRB 344800/01
I 7 500 FH
I 50 MO
ALL 344800-01-1 GROUND PROXIMITY WARNING SYSTEM 210 OPT N
OPERATIONAL CHECK OF GROUND SELF TEST SYSTEM
Skills :
B2 1 0.00 MHrs
RA 1 0.20 MHrs
AMM 345200/5
AMT 345200-720-006
MRB 345200/02
I 15 000 FH
I 100 MO
ALL 345200-02-1 ATC SYSTEM 210 FNT N
FUNCTIONAL CHECK OF ATC ANTENNAS
Skills :
RA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 35 OXYGEN
Task
code
Threshold
Interval
Ctrl References Eff
AMM 351241/5
AMT 351241-710-001
FCO 3-03-06
MRB 351000/01
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 351000-01-1 CREW OXYGEN SYSTEM 210 OPT Y
OPERATIONAL CHECK OF FLIGHT CREW OXYGEN SYSTEM
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 351241/7
AMT 351241-100-001
MRB 351000/07
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 351000-07-1 CREW OXYGEN MASKS 210 CLN Y
CLEANING OF OXYGEN MASKS
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 351000/5
AMT 351000-720-001
MRB 35.10.00/08
I 6 500 FH
I 24 MO
ALL 351000-08-1 CREW OXYGEN MASKS 210 FUC Y
FUNCTIONAL CHECK OF ECAM OXYGEN CYLINDER CONTENTS
INDICATION COMPARED WITH CYLINDER PRESSURE GAUGE
Skills :
AF 1 0.12 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 35 OXYGEN
Task
code
Threshold
Interval
Ctrl References Eff
AMM 351141/6
AMT 351141-750-002
MRB 351000/05
See note
NT Check :
ALL 351141-01-1 CREW OXYGEN CYLINDER 125 RAI Y
HYDROSTATIC TEST OF OXYGEN CYLINDER
Access panels :
812
Skills :
AF 1 0.20 MHrs
AMM 351241/6
AMT 351241-200-001
MRB 351000/03
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 351241-01-1 CREW OXYGEN MASKS 210 DI N
DETAILED INSPECTION OF OXYGEN MASKS (OUT OF BOX)
WITH HARNESS INFLATED
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 351241/6
AMT 351241-750-001
MRB 351000/04
NT Check : ALL 351241-02-1 CREW OXYGEN MASK REGULATORS 210 FNT N
REMOVE FOR FUNCTIONAL CHECK OF MASK REGULATOR
ASSEMBLY
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 35 OXYGEN
Task
code
Threshold
Interval
Ctrl References Eff
AMM 351200/5
AMT 351200-710-001
MRB 351000/02
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 351351-01-1 OXYGEN SUPPLY VALVE 210 OPT N
OPERATIONAL CHECK OF LP SOLENOID VALVE CONTROL
(CLOSING MODE) AND LP INDICATION
Skills :
B2 1 0.00 MHrs
EL 1 0.10 MHrs
AMM 352100/3
AMT 352100-920-001
MRB 352000/3
NT Check : ALL 352142-01-1 OXYGEN GENERATORS 200 DIS Y
DISCARD OXYGEN GENERATORS
Skills :
AF 1 5.40 MHrs
AMM 353000/6
AMT 353242-210-002
MRB 353000/1
I 4 MO
ALL 353000-01-1 PORTABLE OXYGEN CYLINDERS 200 CHK N
CHECK PRESSURE ON CYLINDER PRESSURE GAUGES
Skills :
AF 1 0.02 MHrs
B2 1 0.00 MHrs
AMM 353000/6
AMT 353242-750-001
MRB 353000/2
See note
NT Check :
ALL 353000-02-1 PORTABLE OXYGEN 200 RAI Y
REMOVE PORTABLE OXYGEN CYLINDER ASSEMBLY FOR
HYDROSTATIC TEST (INCLUDING FUNCTIONAL CHECK OF
OXYGEN REGULATOR AND LP RELIEF VALVE)
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 35 OXYGEN
Task
code
Threshold
Interval
Ctrl References Eff
AMM 353000/6
AMT 353242-210-001
MRB 353000/03
I 24 000 FH
I 160 MO
ALL 353000-04-1 PORTABLE OXYGEN 200 CHK N
VISUAL CHECK OF CYLINDER ATTACHMENTS
Skills :
AF 1 0.20 MHrs
AMM 353000/6
AMT 353000-210-006
MRB 353000/04
I 100 DY
ALL 353000-05-1 PROTECTIVE BREATHING EQUIPMENT 200 VCK N
VISUAL CHECK OF THE TAMPER SEAL/SERVICEABILITY
INDICATION OF THE PROTECTIVE BREATHING EQUIPMENT
Skills :
AF 1 0.02 MHrs
B2 1 0.00 MHrs
AMM 353000/6
AMT 353000-920-001
MRB 353000/05
See note
NT Check :
ALL 353000-06-1 PROTECT. BREATHING EQPT (CKPT & CABIN) 200 DIS N
DISCARD PROTECTIVE BREATHING EQUIPMENT
Skills :
AF 1 0.20 MHrs
AMM 353000/6
AMT 353000-220-001
MRB 35.30.00/06
I 24 MO
ALL 353000-07-1 PORTABLE OXYGEN 200 DI N
DETAILED INSPECTION OF PORTABLE OXYGEN MASK
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 36 PNEUMATIC
Task
code
Threshold
Interval
Ctrl References Eff
AMM 361153/5
AMT 361153-720-001
MRB 36.00.00/05
I 22 000 FH
I 5 YE
ALL 361100-01-1 ENGINE BLEED AIR SUPPLY SYSTEM 450 FNT
460
N
FUNCTIONAL CHECK OF OVERPRESSURE VALVE.
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
AF 1 0.20 MHrs
AMM 361100/5
AMT 361100-790-002
SIL 36-047
I 40 MO
ALL 361100-06-1 ENGINE BLEED AIR SUPPLY SYSTEM 410 CHK
420
N
PERFORM LEAK CHECK ON THE COMBO SEALS ON THE
PYLON DUCT SLEEVES (DOWNSTREAM PRECOOLER)
.
NOTE : DEPENDING ON OPERATING ENVIRONMENT AND
OPERATOR'S EXPERIENCE,A LESS OR A MORE
FREQUENT INITIAL INTERVAL MAY BE USED
Skills :
AF 2 0.40 MHrs
AMM 361141/6
AMT 361141-200-010
MRB 360000/16
I 6 000 FH
I 40 MO
ALL 361141-04-1 IP BLEED CHECK VALVE 450 DI
460
N
CHECK OF IP BLEED CHECK VALVE FOR CONDITION
Access panels :
437AL 447AL 451AL 461AL
Skills :
B2 1 0.00 MHrs
EN 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 361143/7
AMT 361143-100-001
MRB 36.00.00/17
SIL 36-055
I 6 000 FH
I 40 MO
ALL 361143-01-1 THERMOSTAT - FAN AIR VALVE CONTROL 413 RST
423
N
REMOVE THE THERMOSTAT-FILTER OF THE FAN AIR
VALVE-CONTROL FOR CLEANING.
NOTE:
- DEPENDING ON OPERATING ENVIRONMENT AND OPERATORS
EXPERIENCE,A LESS OR A MORE FREQUENT INITIAL INTERVAL
MAY BE USED
Access panels :
413DL 423DL
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMM 361200/5
AMT 361200-710-002
MRB 360000/03
I 50 MO
ALL 361200-01-1 AIR BLEED AIR SUPPLY & CROSSBLEED SYST 210 OPT N
OPERATIONAL CHECK OF CROSSBLEED VALVE IN MANUAL MODE
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 361200/5
AMT 361200-790-002
MRB 360000/15
SIL 36-047
I 22 000 FH
I 144 MO
ALL 361200-02-3 APU BLEED AIR SUPPLY & CROSSBLEED SYST 150 FUC
160
190
310
N
PERFORM LEAK CHECK ON APU BLEED AIR DUCTING
(UPSTREAM THE APU BLEED CHECK VALVE)
NOTE :
TASK MAY BE COMBINED WITH TASKS
361148-01-1 AND 361200-03-1
Access panels :
151BW 151CW 151DW 151EW 151HW 151JW 151RW
161AW 161BW 161CW 161DW 197KB 312AR 314AR
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 361200/5
AMT 361200-790-003
MRB 360000/11
SIL 36-047
I 22 000 FH
I 144 MO
ALL 361200-03-1 APU BLEED AIR SUPPLY & CROSSBLEED SYST 191 FUC
192
N
PERFORM LEAK CHECK ON BLEED AIR DUCTING IN THE
FUSELAGE AREA BETWEEN THE APU BLEED CHECK
VALVE, AIR CONDITIONING PACK AND WING/FUSELAGE
CONNECTION
NOTE :
- TASK MAY BE COMBINED WITH TASKS
361148-01-1 AND 361200-02-3
- DEPENDING ON OPERATING ENVIRONMENT AND
Access panels :
191KB 192KB
Skills :
AF 1 1.00 MHrs
AMM 361251/6
AMT 361251-200-001
SIL 36-038
I 24 000 FH
I 160 MO
ALL 361251-01-1 APU BLEED CHECK VALVE 192 DI N
REMOVE AND CHECK AUXILIARY POWER UNIT BLEED
CHECK VALVE FOR CONDITION
Access panels :
197BB
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 38 WATER / WASTE
Task
code
Threshold
Interval
Ctrl References Eff
AMM 381000/2
AMT 381000-670-002
MRB 38.10.00/01
I 750 FH
I 4 MO
A Check :
ALL 381000-01-1 POTABLE WATER SYSTEM 171 RST N
STERILIZATION OF POTABLE WATER SYSTEM AND DISCARD OF
WATER FILTER ELEMENTS, IF INSTALLED
NOTE: -DEPENDING ON OPERATING ENVIRONMENT AND
-PERFORM THIS TASK IN NEXT A CHECK FOR OVERDUED
AIRCRAFT
Access panels :
133AL 171AL
Skills :
B2 1 0.00 MHrs
CA 2 3.00 MHrs
AMM 383167/3
AMT 383167-610-001
MRB 383101/03
SIL 38-020
I 6 000 FH
I 24 MO
ALL 383100-02-1 VACUUM TOILET SYSTEM 170 DI N
INSPECT WATER SEPARATOR AND ASSOCIATED FILTER
ELEMENT, AND CLEAN AS NECESSARY
Access panels :
161DW 162DW
Skills :
B2 1 0.00 MHrs
UT 2 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 383161/6
AMT 383161-210-001
MRB 383101/06
SIL 38-020
I 6 000 FH
I 24 MO
ALL 383100-05-1 VACUUM TOILET SYSTEM 172 DI N
DETAILED INSPECTION OF CLEANLINESS INSIDE WASTE TANK
Access panels :
161DW 162DW
Skills :
B2 1 0.00 MHrs
UT 1 0.50 MHrs
AMM 383100/7
AMT 383100-100-018
MRB 383101/05
SIL 38-020
I 150 FH
I 2 MO
ALL 383100-06-1 VACUUM TOILET SYSTEM 200 RST N
CLEANING OF VACUUM WASTE LINES WITH CHEMICAL CLEANING
AGENT AND CRUSHED ICE
Skills :
AF 1 0.30 MHrs
AMM 383100/7
AMT 383100-100-004
SIL 38-020
I 6 000 FH
I 48 MO
ALL 383100-07-1 VACUUM TOILET SYSTEM 200 RST N
CORRECTIVE VACUUM WASTE LINE CLEANING.
NOTE:INTERVAL MAY BE ADJUSTED ACCORDING TO
OPERATOR EXPERIENCE.
Skills :
B2 1 0.00 MHrs
MEC 2 10.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 383155-100-001
SIL 38-031
NT Check : ALL 383155-01-1 VACUUM TOILET RINSE VALVE 200 RST N
VACUUM TOILET RINSE VALVE
REMOVE, CLEAN AND INSPECT TOILET RINSE VALVES
FROM ALL TOILETS.
NOTE1: TASK APPLICABILITY: AIRCRAFT EQUIPPED WITH P/N:
P/N: 15800-348 REV.A OR P/N 15800-348 REV.B OR P/N 15800-348 REV.C
NOTE2: TASK THRESHOLD IS NEXT C CHECK
Skills :
UT 1 0.35 MHrs
AMM 383200/7
AMT 383200-100-002
MRB 383200/02
SIL 38-029
I 1 200 FH
I 24 MO
ALL 383200-01-1 WASTE WATER DRAIN 200 RST N
CLEAN FILTER ELEMENT OF WASHBASIN DRAIN VALVES
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 384100/3
AMT 384100-610-001
MRB 384000/01
I 24 000 FH
I 72 MO
ALL 384142-01-1 AIR FILTER 171 DIS N
DISCARD SYSTEM FILTER ELEMENT
NOTE : DEPENDING ON EACH INDIVIDUAL OPERATOR'S
ENVIRONMENT A MORE FREQUENT INTERVAL
MAY BE USED
Access panels :
161DW 826
Skills :
CA 1 0.10 MHrs
AMM 384200/6
AMT 384200-210-001
MRB 384000/03
I 12 000 FH
I 80 MO
See note
ALL 384241-01-2 AIR SUPPLY 172 DI N
DETAILED INSPECTION OF COMPRESSOR INLET FILTER.
Access panels :
162DW 826
Skills :
CA 1 0.05 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 384200/3
AMT 384200-610-001
MRB 384000/02
I 24 000 FH
I 72 MO
ALL 384242-01-3 AIR SUPPLY 171 DIS N
DISCARD COMPRESSOR OUTLET FILTER ELEMENT.
Access panels :
161DW 826
Skills :
CA 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 47 INERT GAS GENERATION SYSTEM
Task
code
Threshold
Interval
Ctrl References Eff
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 471041-920-001
MRB 47.00.00/01
I 7 000 FH
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
470000-01-1 INERT GAS GENERATION SYSTEM 191 DIS N R
D-ULPA FILTER ELEMENT REPLACEMENT
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Access panels :
191BB
Skills :
AF 1 0.75 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 471043-920-001
MRB 47.00.00/02
NT Check : 4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
470000-02-1 INERT GAS GENERATION SYSTEM 191 DIS N R
AIR SEPARATOR MODULE REPLACEMENT
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Access panels :
191AB 191BB
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 49 AIRBORNE AUXILLIARY POWER UNIT
Task
code
Threshold
Interval
Ctrl References Eff
AMM 491200/6
AMT 491200-210-004
MRB 491200/02-32
I 80 MO
See note
ALL 491200-A1-1 APU MOUNTS 315 DI Y
DETAILED INSPECTION OF APU SUSPENSION RODS, VIBRATION
ISOLATOR STRUCTURE INCLUDING BRACKETS AND VISIBLE
PART OF STRUCTURE ATTACHMENT FITTINGS
NOTE : TASK MAY BE ACCOMPLISHED AT OPPORTUNITY OF
APU CHANGE
Access panels :
315AL 316AR
Skills :
EN 1 0.30 MHrs
AMT 491200-210-005
MRB 49.12.00/01-32
I 20 MO
3737
3862
3966
4311
4315
491200-A2-1 APU MOUNTS 315 GVI
316
Y
APU MOUNTS
GENERAL VISUAL INSPECTION OF APU SUSPENSION SYSTEM
FOR CONDITION AND SECURITY.
NOTE: THIS TASK IS APPLIED TO A/C THAT IS EQUIPED WITH APS3200 APU SERIES
ONLY
Access panels :
315AL 316AR
Skills :
MEC 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 491200/6
AMT 491200-210-007
MRB 491200/02-13
I 80 MO
See note
ALL 491200-B1-1 APU MOUNTS 315 DI Y
DETAILED INSPECTION OF APU SUSPENSION RODS, VIBRATION
ISOLATOR STRUCTURE INCLUDING BRACKETS AND VISIBLE
PART OF STRUCTURE ATTACHMENT FITTINGS
NOTE : TASK MAY BE ACCOMPLISHED AT OPPORTUNITY OF
APU CHANGE
NOTE : TASK IS ONLY APPLICABLE TO AIRCRAFT FITTED
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
EN 1 0.30 MHrs
AMT 491200-210-804
MRB 49.12.00/01-13
MRB 49.12.00/01-32
I 20 MO
ALL 491200-B2-1 APU MOUNTS 315 GVI
316
Y
APU MOUNTS
GENERAL VISUAL INSPECTION OF APU SUSPENSION SYSTEM
FOR CONDITION AND SECURITY.
NOTE: THIS TASK IS APPLIED TO A/C THAT IS EQUIPED WITH 131-9(A)APU SERIES
ONLY
Access panels :
315AL 316AR
Skills :
MEC 1 0.01 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 491300/6
AMT 491300-200-002
MRB 49.13.00/01-32
I 20 MO
3737
3862
3966
4311
4315
491300-A1-1 FIRE SEALS 310 GVI Y
GENERAL VISUAL INSPECTION OF ALL APU COMPARTMENT FIRE
WALLS AND SEALS:
- COMPARTMENT DOORS
- FWD AND AFT FIRE WALLS
- SIDE FIRE WALLS
- UPPER FIRE WALL
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 1.42 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 491300/6
AMT 491300-200-003
MRB 49.13.00/01-13
I 20 MO
ALL 491300-B1-1 FIRE SEALS 310 GVI Y
GENERAL VISUAL INSPECTION OF ALL APU COMPARTMENT FIRE
WALLS AND SEALS:
- COMPARTMENT DOORS
- FWD AND AFT FIRE WALLS
- SIDE FIRE WALLS
- UPPER FIRE WALL
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 1.42 MHrs
AMM 491600/6
AMT 491600-210-002
MRB 491600/03-32
I 40 MO
3737
3862
3966
4311
4315
491600-A1-1 AIR INTAKE SYSTEM 310 DI Y
DETAILED INSPECTION OF APU AIR INTAKE,
DIFFUSER ELBOW, SEALS AND FELT METAL
Access panels :
314AR 315AL 316AR
Skills :
EN 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2006-0153
AD 2007-13-08
AMM 491600/7
AMT 491600-100-002
ISB 49-1068
I 2 400 FH
2255
2261
2267
2303
2480
491600-A4-1 AIR INTAKE SYSTEM 310 RST Y
CLEANING OF APU AIR INTAKE
NOTE: APPLY FOR APU APIC(APS 3200) PRE 35803 (49-1070)
Access panels :
315AL 316AR
Skills :
AF 1 1.50 MHrs
AD 2006-0153
AD 2007-13-08
AMM 491600/6
AMT 491600-210-005
ISB 49-1068
I 600 FH
3737
3862
3966
4311
4315
491600-A5-1 AIR INTAKE SYSTEM 310 GVI Y
GENERAL VISUAL INSPECTION OF APU AIR INLET PLENUM
AND APU AIR INTAKE.
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 491600/6
AMT 491600-200-002
MRB 49.16.00/01-13
I 40 MO
ALL 491600-B1-1 AIR INTAKE SYSTEM 313 DI
315
Y
DETAILED INSPECTION OF APU AIR INTAKE,
DIFFUSER ELBOW, SEALS AND FELT METAL
WITH 131-9(A) APU
Access panels :
314AR 315AL 316AR
Skills :
EN 1 0.30 MHrs
AD 2006-0153 02 01
AD 2007-13-08
AMM 491600/6
AMT 491600-210-802
EAD 2006-0153
ISB 49-1068
I 600 FH
ALL 491600-B6-1 AIR INTAKE SYSTEM 310 GVI Y D
GENERAL VISUAL INSPECTION OF APU AIR INLET PLENUM
AND APU AIR INTAKE.
WITH 131-9(A) APU AND PRE MOD 35936
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 492100-920-007
MRB 49.21.00/05-13
See note
NT Check :
ALL 492100-B5-1 POWER SECTION 315 DIS
317
Y
DISCARD LIFE LIMITED PARTS OF THE APU POWER
SECTION IN ACCORDANCE WITH OEM RECOMMENDATION
NOTE : REFER TO APPROVED ENGINE MANUAL FOR INTERVAL.
WITH 131-9(A) APU
PREP. : APU REMOVED;
Access panels :
315AL 316AR 317AL
AMT 493241-920-001
MRB 49.30.00/02-13
I 8 500 FH
I 72 MO
ALL 493000-B1-1 ENGINE FUEL AND CONTROL 315 DIS Y
DISCARD FUEL INLET FILTER ELEMENT
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.15 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 493100/5
AMT 493100-710-002
MRB 493400/01-32
I 24 MO
3737
4311
4315
493400-A1-1 APU FUEL LOW PRESSURE WARNING 210 OPT N
OPERATIONAL CHECK OF APU FUEL LOW PRESSURE CIRCUIT
WITH APIC 3200 APU
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
AMT 493100-710-003
MRB 49.34.00/01-13
I 24 MO
ALL 493400-B1-1 APU FUEL LOW PRESSURE WARNING 210 OPC N
OPERATIONAL CHECK OF APU FUEL LOW PRESSURE CIRCUIT
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 494141/6
AMT 494141-920-001
MRB 494000/02-32
I 2 250 FH
I 24 MO
3737
4311
4315
494000-A1-1 IGNITION AND STARTING 316 DI Y
REMOVE AND DISCARD IGNITER PLUGS
WITH APIC 3200 APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.20 MHrs
AMT 494141-220-001
MRB 49.40.00/02-13
I 6 000 FH
I 40 MO
ALL 494000-B2-1 IGNITION AND STARTING 315 VCK Y
DETAILED INSPECTION OF IGNITER PLUG
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2007-13-08
AMT 494251-200-008
EAD 2006-0153
ISB 49-1068
I 600 FH
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
494000-B3-1 IGNITION AND STARTING 315 VCK Y D
CHECK WEAR INDICATOR OF STARTER MOTOR BRUSH
WITH 131-9(A) APU
Access panels :
315AL
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 494251-200-008
SIL 49-043
I 750 FH
I 6 MO
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
494000-B3-2 IGNITION AND STARTING 315 VCK Y R
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
5994
Access panels :
315AL
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2007-13-08
AMT 494251-700-002
EAD 2006-0153
ISB 49-1068
I 600 FH
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
494000-B4-1 IGNITION AND STARTING 315 OPT Y D
TEST OF CLUTCH OF APU STARTER MOTOR
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2006-0153
AD 2007-13-08
AMM 494251/6
AMT 494251-200-006
ISB 49-1068
I 600 FH
2255
2261
2267
2303
2480
494251-A1-1 STARTER MOTOR 315 VCK N
Access panels :
315AL
Skills :
B2 1 0.00 MHrs
EN 1 0.05 MHrs
AMM 494251/6
AMT 494251-200-006
SIL 49-043
I 750 FH
I 6 MO
3737
4311
4315
494251-A2-1 STARTER MOTOR 315 VCK N
WITH APIC 3200 APU
Access panels :
315AL
Skills :
B2 1 0.00 MHrs
EN 1 0.05 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 498100-200-016
MRB 49.80.00/04-32
I 24 MO
3737
4311
4315
498000-A4-1 EXHAUST 310 VCK N
VISUAL CHECK OF APU COMPARTMENT EXHAUST MUFFLER
INSULATION COVERS AND BELLOWS
WITH APIC 3200 APU
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
AMT 498100-200-017
MRB 49.80.00/01-13
I 24 MO
ALL 498000-B1-1 EXHAUST 310 VCK N
VISUAL CHECK OF APU COMPARTMENT EXHAUST MUFFLER
INSULATION COVERS AND BELLOWS
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 490000-790-007
SIL 49-032
I 7 500 FH
I 50 MO
ALL 499000-A2-1 OIL SYSTEM 310 VCK N
CHECK APU COMPARTMENT AND AIR INTAKE DUCT FOR
OIL CONTAMINATION
WITH APIC 3200 APU
Access panels :
315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
AMT 499141-200-002
SIL 49-051
I 3 000 FH
I 24 MO
ALL 499100-B2-1 STORAGE AND DISTRIBUTION 315 DIS N
REMOVE AND DISCARD OIL FILTER ELEMENTS (8069KM)
AND (8076KM).
NOTE : DEPENDING ON OPERATING ENVIROMENT AND
OPERATORS EXPERIENCE A HIGHER INITIAL
INTERVAL MAY BE USED
WITH 131-9(A) APU
Access panels :
315AL 316AR
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 490000-790-008
SIL 49-032
I 7 500 FH
I 50 MO
ALL 499100-B4-1 STORAGE AND DISTRIBUTION 310 VCK N
CHECK APU COMPARTMENT AND AIR INTAKE DUCT FOR
OIL CONTAMINATION
WITH 131-9(A) APU
Access panels :
314AR 315AL 316AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521000/6
AMT 521000-210-004
MRB 521000/01
I 8 DY
ALL 521000-01-1 PASSENGER/CREW DOOR 831 CHK
832
841
842
Y
CHECK EMERGENCY CYLINDER/ACCUMULATOR PRESSURE
Skills :
AF 1 0.04 MHrs
AMM 521000/5
AMT 521000-720-001
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
ALL 521000-02-1 PASSENGER/CREW DOOR 831 FNT
832
841
842
N
FUNCTIONAL CHECK OF DOOR SUSPENSION
Access panels :
831 831FZ 831GZ 832 832FZ 832GZ 841
841FZ 841GZ 842 842FZ 842GZ
Skills :
AF 1 0.20 MHrs
AMM 521000/6
AMT 521000-220-006
MRB 52.10.00/06
I 15 000 FH
I 10 000 CY
I 48 MO
2C Check :
ALL 521000-03-1 PASSENGER/CREW DOOR 831 DI
832
841
842
Y
DETAILED INSPECTION OF DOOR SEALS
NOTE: TASK IS NOT APPLICABLE FOR DEACTIVATED
Access panels :
831 832 841 842
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521000/6
AMT 521000-200-002
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
ALL 521000-04-1 PASSENGER/CREW DOOR 831 DI
832
841
842
Y
DETAILED INSPECTION OF PASSENGER/CREW
DOOR FOR INTEGRITY AND GOOD ADJUSTMENT OF
MECHANISMS (INCLUDING GIRT BAR)
PREP. : INSULATION REMOVED
NOTE: RII TASK
Access panels :
831AZ 831BZ 831CZ 831DZ 831EZ 831FZ 831GZ
832AZ 832BZ 832CZ 832DZ 832EZ 832FZ 832GZ
841AZ 841BZ 841CZ 841DZ 841EZ 841FZ 841GZ
842AZ 842BZ 842CZ 842DZ 842EZ 842FZ 842GZ
Skills :
AF 1 0.40 MHrs
AMM 521000/5
AMT 521000-720-003
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
832
841
842
N
FUNCTIONAL CHECK OF LOCKING MECHANISM
Access panels :
831 832 841 842
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521000/5
AMT 521000-720-005
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
832
841
842
N
FUNCTIONAL CHECK OF ESCAPE SLIDE RELEASE
MECHANISM
NOTE : ONLY FWD DOORS FOR POST 37807 (IF AFT DOORS
FULLY DEACTIVATED)
Skills :
AF 1 0.80 MHrs
AMM 521000/5
AMT 521000-200-001
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
ALL 521000-07-1 PASSENGER/CREW DOOR 831 CHK
832
841
842
N
CHECK OF DOOR STOPS ADJUSTMENT
Access panels :
831 832 841 842
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521000/5
AMT 521000-710-002
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
ALL 521000-08-1 PASSENGER/CREW DOOR 831 OPT
832
841
842
N
OPERATIONAL CHECK OF INTERLOCK MECHANISM TO
ENSURE THAT EMERGENCY ESCAPE HANDLE STAYS IN
DISARMED POSITION WHEN DOOR IS UP AND OUTSIDE
OF FRAME
FULLY DEACTIVATED)
Access panels :
831 832 841 842
Skills :
AF 1 0.40 MHrs
AMM 521000/5
AMT 521000-720-004
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
832
841
842
N
FUNCTIONAL CHECK OF MECHANICAL LOCKING
INDICATION
Access panels :
831 832 841 842
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521000/5
AMT 521000-710-001
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
832
841
842
N
OPERATIONAL CHECK OF DAMPING DURING
OPENING/CLOSING
FULLY DEACTIVATED)
Access panels :
831 832 841 842
Skills :
AF 1 0.20 MHrs
AMM 521000/5
AMT 521000-710-003
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
832
841
842
N
OPERATIONAL CHECK OF STRIKER MECHANISM
FULLY DEACTIVATED)
Access panels :
831 832 841 842
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521000/5
AMT 521000-720-002
MRB 52.10.00/02
MRB 52.10.00/08
I 15 000 FH
I 10 000 CY
I 80 MO
832
841
842
N
OPERATIONAL CHECK OF ESCAPE SLIDE DISARMING
WHEN DOOR IS OPENED FROM THE OUTSIDE
FULLY DEACTIVATED)
Access panels :
831 832 841 842
Skills :
AF 1 0.20 MHrs
AMM 122252/3
AMT 122252-640-016
MRB 521000/05
SIL 53-076
I 20 MO
ALL 521000-14-1 PASSENGER/CREW DOOR 831 LUB
832
841
842
N
PASSENGER/CREW DOOR
LUBRICATION OF HINGE ARM SUPPORT FITTING BEARINGS
Skills :
AF 1 0.80 MHrs
B2 1 0.00 MHrs
AMM 122252/3
AMT 122252-640-006
MRB 521000/03
I 20 MO
ALL 521121-01-1 PAX/CREW DOOR 831 LUB
832
841
842
N
LUBRICATION OF EXTERIOR CONTROL HANDLE AND TELESCOPIC
ARM
Skills :
AF 1 1.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122252/3
AMT 122252-640-014
AOT 52A1103
MRB 521000/04
I 36 MO
ALL 521121-02-1 PAX/CREW DOOR 831 LUB
832
841
842
N
LUBRICATION OF SAFETY PIN GUIDE FITTING AND DOOR
ARMING/DISARMING MECHANISM
Access panels :
831BZ 831CZ 831DZ 832BZ 832CZ 832DZ 841BZ
841CZ 841DZ 842BZ 842CZ 842DZ
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 522200/5
AMT 522200-710-001
MRB 522200/01
I 8 000 FH
I 53 MO
ALL 522200-01-1 PASSENGER COMPARTMENT EMERGENCY EXIT 833 OPC
834
843
844
Y
OPERATIONAL CHECK
- OF DOOR LOCKING/UNLOCKING AND DOOR OPENING/CLOSING
FROM INSIDE AND OUTSIDE AND DOOR LATCHING AND UNLATCHING,
- TO ENSURE THAT DOOR CANNOT BE LOWERED AND LOCKED
WHEN OPEN,
- OF DOOR DAMPING MECHANISM,
- OF ESCAPE SLIDE DISARMING WHEN DOOR IS OPENED FROM
OUTSIDE,
- TO ENSURE THAT ESCAPE SLIDE ARMING LEVER IS LOCKED
IN "DISARMED" POSITION WHEN DOOR IS OPEN, AND
FUNCTIONAL CHECK
- OF LOCKING MECHANISM, HAND FORCE
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 522200/5
AMT 522200-720-001
MRB 522200/02
I 8 000 FH
I 53 MO
ALL 522200-02-1 PASSENGER COMPARTMENT EMERGENCY EXIT 833 OPC
834
843
844
N
OPERATIONAL CHECK
- OF DOOR UNLOCKING FROM INSIDE AND OUTSIDE IN
"ARMED" POSITION,
- OF ESCAPE SLIDE RELEASE MECHANISM
ARMING/DISARMING, AND FUNCTIONAL CHECK
- OF SLIDE RELEASE CABLE MOVEMENT
Skills :
AF 1 1.20 MHrs
B2 1 0.00 MHrs
AMM 122252/3
AMT 122252-640-013
MRB 522200/03
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 522200-03-1 PASSENGER COMPARTMENT EMERGENCY EXIT 833 LUB
834
843
844
N
LUBRICATION OF EXTERIOR CONTROL HANDLE AND TELESCOPIC
ARM
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 522211/6
AMT 522211-200-004
MRB 522200/04
I 8 000 FH
I 53 MO
ALL 522200-04-1 PASSENGER COMPARTMENT EMERGENCY EXIT 833 DVI
834
843
844
N
DOOR DETAILEDINSPECTION OF CYLINDER ASSEMBLY
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 522200/6
AMT 522200-200-001
MRB 522200/06
I 8 DY
ALL 522200-08-1 PASSENGER COMPARTMENT EMER EXIT DOOR 833 VCK
834
843
844
N
DOOR
CHECK EMERGENCY CYLINDER/ACCUMULATOR PRESSURE ON
PRESSURE GAUGE
Skills :
AF 1 1.00 MHrs
AMM 122252/3
AMT 122252-640-002
MRB 523100/01
I 4 500 CY
I 18 MO
ALL 523000-01-1 CARGO COMPARTMENT DOOR 825 LUB
826
N
LUBRICATION OF FWD AND AFT CARGO DOOR
Access panels :
825 825AR 826 826AR
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 122252/3
AMT 122252-640-009
MRB 523100/01
I 4 500 CY
I 18 MO
ALL 523000-03-1 CARGO COMPARTMENT DOOR 825 LUB
826
N
LUBRICATION OF EXTERIOR CARGO DOOR HANDLE
NOTE : INTERVAL MAY NEED TO BE MORE FREQUENT
WHEN OPERATING IN HOSTILE ENVIRONMENTS
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 523100/5
AMT 523100-720-001
MRB 523100/02
I 18 000 CY
I 72 MO
ALL 523100-01-1 FORWARD CARGO COMPARTMENT DOOR 825 FUT N
FUNCTIONAL CHECK OF FORWARD CARGO COMPARTMENT
DOOR, COMPRISING FUNCTIONAL CHECKS OF:
- LOCKING MECHANISM
- INTERLOCK MECHANISM
- DRIFT PIN MECHANISM
- SAFETY MECHANISM
Access panels :
825 825AR
Skills :
AF 2 0.20 MHrs
AMM 523200/5
AMT 523200-720-001
MRB 523100/02
I 18 000 CY
I 72 MO
ALL 523200-01-1 AFT CARGO COMPARTMENT DOOR 826 FUT N
FUNCTIONAL CHECK OF AFT CARGO COMPARTMENT
DOOR, COMPRISING FUNCTIONAL CHECKS OF:
- LOCKING MECHANISM
- INTERLOCK MECHANISM
- DRIFT PIN MECHANISM
- SAFETY MECHANISM
Access panels :
826 826AR
Skills :
AF 2 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122252/3
AMT 122252-640-007
MRB 523300-01-1
I 4 500 CY
I 18 MO
ALL 523300-01-1 BULK CARGO COMPARTMENT DOOR 827 LUB N
LUBRICATION OF BULK CARGO COMPARTMENT DOOR HANDLE AND
HINGE ARM BEARINGS
NOTE: INTERVAL MAY NEED TO BE MORE FREQUENT
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 523500/5
AMT 523500-710-001
MRB 523500/01
I 10 000 CY
I 72 MO
ALL 523500-01-1 CARGO COMPARTMENT DOOR - ELECTRICAL 100 OPT Y
CARGO COMPARTMENT DOOR ELECTRICAL CONTROL SYS
AND HYD SYSTEM
OPERATIONAL CHECK OF DOOR CLOSING INHIBITION BY DOOR
SILL LATCH SWITCH
Access panels :
826
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 524100/6
AMT 524100-210-001
MRB 524100/01
I 15 000 FH
I 10 000 CY
I 48 MO
2C Check :
ALL 524100-01-1 ACCESS DOORS 811 DI
812
822
824
Y
DETAILED INSPECTION OF
DOOR SEALS
Access panels :
811 812 822 824
Skills :
AF 1 0.40 MHrs
AMM 122252/3
AMT 122252-640-008
MRB 524100/02
I 20 MO
ALL 524100-02-1 ACCESS DOORS 811 LUB
812
822
824
N
LUBRICATION OF EXTERIOR AVIONIC COMPARTMENT
DOOR HANDLE
.
NOTE : INTERVAL MAY NEED TO BE MORE FREQUENT
Access panels :
811 812 822 824
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 525100/6
AMT 525100-220-001
MRB 525111/01
I 15 000 FH
I 100 MO
ALL 525111-01-1 COCKPIT DOOR 220 DI N
DETAILED INSPECTION OF MECHANICAL PARTS OF DOOR
LOCKING SYSTEMS
Skills :
AF 1 0.25 MHrs
AMM 525100/5
AMT 525100-720-002
MRB 525111/02
I 15 000 FH
I 48 MO
ALL 525111-02-1 COCKPIT DOOR 220 OPC N
OPERATIONAL CHECK OF ALL PRESSURE SENSING CHANNELS
FOR RAPID DECOMPRESSION.
Skills :
AF 1 0.15 MHrs
AMM 525100/5
AMT 525100-710-005
MRB 525111/02
I 15 000 FH
I 48 MO
OPERATIONAL CHECK OF DOOR OPENING IN CASE OF
POWER OFF.
Skills :
AF 1 0.05 MHrs
AMM 525100/5
AMT 525100-710-006
MRB 525111/02
I 15 000 FH
I 48 MO
OPERATIONAL CHECK OF DOOR OPENING BY USING THE
EMERGENCY CODE.
Skills :
AF 1 0.05 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 525100-710-008
MRB 52.51.11/04
I 12 000 FH
I 80 MO
4213
4277
4315
525111-07-1 COCKPIT DOOR 220 OPC N
OPERATIONAL CHECK OF DEADBOLT
Skills :
AF 1 0.05 MHrs
AMT 525100-710-010
MRB 52.51.11/05
I 72 MO
OPERATIONAL CHECK OF MANUAL RELEASE OF PIP-PINS
Skills :
AF 1 0.20 MHrs
AMM 527100/5
AMT 527100-710-001
MRB 527100/01
I 7 500 FH
I 40 MO
ALL 527100-01-1 DOOR WARNING 210 OPT N
OPERATIONAL CHECK OF DOOR WARNING SYSTEM
PASSENGER/CREW DOORS / EMERGENCY EXITS
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 122252/3
AMT 122252-640-005
MRB 527100/02
I 18 MO
ALL 527100-02-1 DOOR WARNING 831 LUB
832
841
842
N
LUBRICATION OF DOOR WARNING PROXIMITY SWITCH
ACTUATING MECHANISM
Access panels :
831 832 841 842
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 527300/5
AMT 527300-710-003
MRB 527300/01
I 7 500 FH
I 40 MO
ALL 527300-01-1 EMERGENCY ESCAPE SLIDE RELEASE 210 OPT N
AND OVERPRESSURE WARNING SYSTEMS
OPERATIONAL CHECK OF EMERGENCY ESCAPE SLIDE RELEASE
WARNING
PASSENGER/CREW DOORS / EMERGENCY EXITS
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 527300/5
AMT 527300-720-003
MRB 527300/02
I 18 000 CY
I 80 MO
ALL 527300-02-1 EMERGENCY ESCAPE SLIDE RELEASE AND 122 OPT N
OVERPRESSURE WARNING SYSTEMS
OPERATIONAL CHECK OF RESIDUAL CABIN PRESSURE WARNING
AND FUNCTIONAL CHECK OF DIFFERENTIAL PRESSURE SWITCH
Access panels :
811
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 530000/6
AMT 530000-210-001
MRB 531900/03
I 6 YE
ALL 530000-01-1 FUSELAGE DRAINAGE 100 DVI N
REMOVE AND DETAILED INSPECTION OF PISTON TYPE
DRAIN VALVES IN LOWER FUSELAGE SHELL
Skills :
AF 1 0.40 MHrs
AMM 531900/6
AMT 531900-210-001
MRB 531900/06
I 4 MO
ALL 531900-01-1 FUSELAGE DRAINAGE 220 DI N
INSPECTION OF FUSELAGE DRAINAGE
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 531900/6
AMT 531900-710-001
MRB 531900/07
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 531900-02-1 FUSELAGE DRAINAGE 120 OPT Y
OPERATIONAL CHECK OF THE FUSELAGE DRAINAGE
Access panels :
824 825
Skills :
B2 1 0.00 MHrs
MEC 2 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531900/6
AMT 531900-710-003
MRB 531900/08
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 531900-03-1 FUSELAGE DRAINAGE 120 OPC
130
150
Y
OPERATIONAL CHECK OF PISTON TYPE DRAIN VALVES IN
LOWER FUSELAGE SHELL FROM OUTSIDE
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-013
MRB 532180-01-3
T 5 YE
I 5 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
532180-01-3 FUSELAGE FR 24-35.8 133 DI
134
137
138
Y
DETAILED INSPECTION OF FUSELAGE INTERNAL STRUCTURE
BETWEEN FR 24 AND FR 35.8, INCLUDING FORWARD FACE OF
PRESSURE BULKHEAD, FROM STRINGER 38 LH/RH TO BOTTOM
CENTERLINE
NOTE 1: TII TPS MAY BE LIMITED TO FUSELAGE INTERNAL
STRUCTURE FROM FR 35.7 TO FR 35.8, AND FORWARD FACE
OF PRESSURE BULKHEAD, FROM STRINGER 38, LH/RH TO
BOTTOM CENTERLINE
TPS : APPLICATION OF TPS TYPE 1 PLUS A SUBSEQUENT
APPLICATION OF TPS TYPE 2
PREP: CARGO FLOOR PANELS
OF
Access panels :
825
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 533900/6
AMT 533900-210-001
MRB 531900/01
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 533900-01-1 FUSELAGE DRAINS 140 INS Y
OPERATIONAL CHECK OF RUBBER FLAP DRAIN VALVE HOLES IN
PRESSURE FLOOR FROM MLG BAY
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 535900/6
AMT 535900-210-001
MRB 531900/02
I 8 MO
ALL 535900-01-1 FUSELAGE DRAINS 310 INS Y
OPERATIONAL CHECK OF SINGLE DRAIN PIPE AFT OF FR 70
FROM OUTSIDE
Skills :
AF 1 0.05 MHrs
B2 1 0.00 MHrs
AMM 535900/6
AMT 535900-210-002
MRB 531900/05
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 535900-02-1 FUSELAGE DRAINS 827 OPC N
OPERATIONAL CHECK OF RUBBER FLAP DRAIN VALVE AT
BULK CARGO COMPARTMENT DOOR FROM OUTSIDE
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545000/6
AMT 545000-200-001
MRB 545000/01
I 24 MO
C Check :
ALL 545000-01-1 PYLONS 410 GVI
420
Y
GENERAL VISUAL INSPECTION OF COMPARTMENT A AND F
PYLON DRAIN SYSTEM
NOTE: ACCESS 482AR 482BR 486AR OR 471CL 481BR 481CR
485AR OR 425BL ARE ALTERNATIVE DEPENDING ON
CONFIGURATION.
Access panels :
413AL 415AL 415BL 423AL 425AR 425BL 425BR
471AL 471BL 471CL 475AL 481BR 481CR 482AR
482BR 485AR 486AR
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 545000/6
AMT 545000-200-002
MRB 545000/02
I 72 MO
ALL 545000-02-1 PYLONS 410 CHK
420
N
FLOW CHECK OF INDIVIDUAL DRAIN LINES OF PYLON SYSTEM
Access panels :
413AL 423AL 471AL 471BL 482AR 482BR
Skills :
AF 2 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545000/6
AMT 545000-220-001
ISB 54-029
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 545000-03-1 PYLON DRAINAGE 410 DI
420
Y
DETAILED INSPECTION OF THE CAF4 SEALANT IN PYLON
CANTILEVER ZONE "A"
Access panels :
413AL
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMT 545000-220-002
MRB 54.50.00/03
I 24 MO
ALL 545000-04-1 PYLONS 410 DI
420
Y
PYLONS
DETAILED INSPECTION OF PYLON COMPARTMENT C DRAIN
SYSTEM.
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 552600-200-002
SIL 55-035
T 12 YE
I 12 YE
ALL 552600-01-1 ELEVATOR ATTACH FITTINGS 335 CHK
345
Y R
CHECK OF ELEVATOR ATTACHMENT FITTINGS FOR WEAR,
LH/RH
PREP. : ELEVATOR REMOVED;
NOTE: RII TASK
Access panels :
334BB 334DB 334FB 334HB 344BB 344DB 344FB
344HB
Skills :
AF 1 5.00 MHrs
AMT 554600-200-802
SIL 55-038
I 6 YE
ALL 553600-01-1 RUDDER ATTACH FITTINGS 325 CHK N R
CHECK OF RUDDER ATTACHMENT FITTINGS FOR WEAR
AMD 00 EFFECTIVE DATE IS NEXT 6Y CHECK.
NOTE 1: RII TASK
Access panels :
325BL 325BR 325CL 325CR 325DL 325DR 325EL
325ER
Skills :
AF 1 6.42 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 56 WINDOWS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 561000/6
AMT 561000-200-003
SIL 56-017
I 4 MO
ALL 561000-01-1 COCKPIT WINDOWS 210 DI Y
DETAILED INSPECTION OF ALL COCKPIT WINDOWS FROM
INSIDE.
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 561000/6
AMT 561000-200-005
SIL 56-017
I 20 MO
ALL 561000-02-1 COCKPIT WINDOWS 210 DI Y
DETAILED INSPECTION OF ALL COCKPIT WINDOWS FROM
OUTSIDE
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 561200/6
AMT 561200-220-001
MRB 561200/02
SIL 56-017
I 48 MO
2C Check :
ALL 561200-01-1 SLIDING WINDOWS 210 DI Y
DETAILED INSPECTION OF WINDOW SEALS
Skills :
AF 1 0.10 MHrs
AMM 122256/3
AMT 122256-600-001
MRB 561200/01
I 20 MO
ALL 561200-02-1 SLIDING WINDOWS 210 LUB N
LUBRICATION OF COCKPIT SLIDING WINDOW TRACKS
Skills :
B2 1 0.00 MHrs
MEC 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572900/6
AMT 572900-210-002
MRB 572900/01
I 80 MO
ALL 572900-01-1 MISCELLANEOUS (DRAINS) FOR OUTER WING 500 CHK
600
Y
CHECK OF DRAIN HOLES AND HOSES FOR CLOGGING
Skills :
AF 1 0.72 MHrs
AMM 573900/6
AMT 573900-200-002
MRB 573900/01
I 80 MO
ALL 573900-01-1 MISCELLANEOUS (DRAINS) FOR WING TIP 530 CHK
630
Y
CHECK OF DRAIN HOLES FOR CLOGGING
Skills :
AF 1 0.20 MHrs
AMM 575900/6
AMT 575900-200-002
MRB 575900/01
I 80 MO
ALL 575900-01-1 MISCELLANEOUS (DRAINS) 500 CHK
600
Y
FOR LEADING/TRAILING EDGE AND
LEADING/TRAILING EDGE DEVICES
.
CHECK OF DRAIN HOLES FOR CLOGGING
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 711300/5
AMT 711300-800-010
MRB 71.13.00/06-I2
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL 711300-I2-1 FAN COWL 430 OPT
440
N
FUNCTIONAL CHECK OF FAN COWL LATCH TENSIONS.
Access panels :
437AL 438AR 447AL 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.20 MHrs
AMT 711300-210-803 I 6 000 FH
I 40 MO
ALL 711300-I4-1 FAN COWL 430 GVI
440
N
FAN COWL
GENERAL VISUAL INSPECTION OF INNER SURFACE OF DOORS
AND SEALS
Access panels :
437AL 438AR 447AL 448AR
Skills :
EN 1 2.20 MHrs
AMT 711300-220-801 I 24 MO
440
N
FAN COWL
FUNCTIONAL CHECK OF PRESSURE RELIEF DOOR LATCH
ASSEMBLY
Skills :
EN 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 711300-210-802 I 7 500 FH
I 24 MO
440
N
FAN COWL
GENERAL VISUAL INSPECTION OF FAN COWL LATCHES AND
SURROUNDING STRUCTURE
Skills :
EN 1 0.76 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 72 ENGINE
Task
code
Threshold
Interval
Ctrl References Eff
AMM 723281/4
AMT 723281-920-010
MRB 723280/01
MRB 723280/01-I2
See note
NT Check :
ALL 723000-I1-1 COMPRESSOR SECTION 430 DIS
440
N
DISCARD BOOSTER DISC
PREP.: ENGINE REMOVED;
AMM 724110/4
AMT 724110-920-010
MRB 724100/01
MRB 724100/01-I2
See note
NT Check :
ALL 723000-I2-1 COMPRESSOR SECTION 450 DIS
460
N
DISCARD LIFE LIMITED HP COMPRESSOR MODULE ROTATING
PARTS
AMM 723100/4
AMT 723100-920-010
MRB 723100/01
MRB 723100/01-I2
See note
NT Check :
ALL 723100-I1-1 LP COMPRESSOR (FAN) SECTION 430 DIS
440
N
DISCARD FAN DISC
AMM 720000/6
AMT 720000-200-011
ISB V2500-ENG-72-0297
I 1 500 CY
ALL 723100-I3-1 LP COMPRESSOR (FAN) SECTION 430 DI
440
N
TAP TEST OF ENGINE FAN BLADES
NOTE : REFER TO SB V2500-ENG-72-0297
Skills :
B2 1 0.00 MHrs
EN 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 72 ENGINE
Task
code
Threshold
Interval
Ctrl References Eff
AMM 723111/6
AMT 723111-200-013
MRB 723100/03-I2
I 5 000 CY
I 72 MO
ALL 723100-I4-1 LP COMPRESSOR (FAN) MODULE 430 DI
440
N
DETAILED INSPECTION OF FAN BLADES LEADING EDGE FOR
EROSION
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
AMT 723111-200-010
AMT 723111-300-014
ISB V2500-ENG-72-0386
VSB V2500-ENG-72-0386 07 01
See note
NT Check :
ALL 723100-I6-1 LP COMPRESSOR (FAN) SECTION 430 DI
440
N
DOVETAIL ROOT FLANK ULTRASONIC INSPECTION AND
APPLICATION OF DRY FILM LUBRICANT
NOTE : REFER TO SB V2500-ENG-72-0386
Skills :
B2 1 0.00 MHrs
EN 1 14.80 MHrs
AMM 720000/6
AMT 720000-200-013
MRB 724000/01
MRB 724000/01-I2
I 2 400 FH
I 1 200 CY
I 72 MO
ALL 724000-I1-1 COMBUSTION SECTION 450 BSI
460
N
BORESCOPE INSPECTION OF INSIDE OF COMBUSTION CHAMBER
AND HP TURBINE STAGE 1 VANES
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
B2 1 0.00 MHrs
ENG 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 72 ENGINE
Task
code
Threshold
Interval
Ctrl References Eff
AMM 720000/6
AMT 720000-200-018
MRB 724500/01
MRB 724500/01-I2
I 2 400 FH
I 1 200 CY
I 72 MO
ALL 725000-I1-1 TURBINE SECTION 450 BSI
460
N
BORESCOPE INSPECTION OF HP TURBINE BLADE AEROFOILS
INTERVAL NOTE: 4A OR 1200CY
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
B2 1 0.00 MHrs
ENG 1 2.00 MHrs
AMM 724500/4
AMT 724500-920-010
MRB 724500/02
See note
NT Check :
ALL 725000-I2-1 TURBINE SECTION 450 DIS
460
N
DISCARD HP TURBINE DISCS, ROTATING AIRSEALS AND
RETAINING PLATES
AMM 725000/4
AMT 725000-920-010
MRB 725000/01
MRB 725000/01-I2
See note
NT Check :
ALL 725000-I3-1 TURBINE SECTION 450 DIS
460
N
DISCARD LPT SHAFT, DISCS AND ROTATING AIRSEALS
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 72 ENGINE
Task
code
Threshold
Interval
Ctrl References Eff
VSB V2500-ENG-72-0461 06 I 6 000 FH
ALL 725000-I4-1 TURBINE SECTION 450 DI
460
N
INSPECTION OF THE NUMBER 5 BEARING COMPARTMENT (OIL
JET) AND OIL TUBES FOR COKING
Skills :
B2 1 0.00 MHrs
EN 1 14.00 MHrs
AMM 726000/6
AMT 726000-200-011
MRB 726000/01-I2
I 10 000 FH
I 9 000 CY
I 100 MO
ALL 726000-I1-1 ACCESSORY DRIVES (EXTERNAL GEARBOX) 430 GVI
440
Y
GENERAL VISUAL INSPECTION OF GEARBOX MOUNTING
LINKS AND ATTACHMENT FEATURES
Access panels :
437AL 438AR 447AL 448AR
Skills :
EN 1 0.40 MHrs
AMM 723251/4
AMT 723251-920-010
MRB 723226/01
MRB 723226/01-I2
See note
NT Check :
ALL 726000-I2-1 INTERNAL GEARBOX AND DRIVE SYSTEM 430 DIS
440
N
DISCARD LP STUB SHAFT
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 73 ENGINE FUEL CONTROL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 732200/5
AMT 732200-740-042
SIL 73-017
I 600 FH
ALL 730000-I4-1 ENGINE FUEL & CONTROL-GENERAL 210 OPC B1
CORRECT FAULTS OF THE ENGINE SCHEDULED MAINTENANCE
REPORT (SMR)
Skills :
B2 1 0.00 MHrs
EN 1 0.10 MHrs
AMM 731242/4
AMT 731242-920-010
MRB 731000/01-I2
SIL 73-024
T 1 500 FH
T 750 FH
T 150 FH
I 6 000 FH
I 40 MO
ALL 731000-I1-1 FUEL DISTRIBUTION 435 RAR
445
N
REMOVE, INSPECT FOR CONTAMINATION AND REPLACE MAIN
FUEL FILTER
NOTE 1: - REMOVE AND REPLACE FILTER ELEMENT
AT 150 FH, 750 FH AND 1500 FH
AFTER A/C DELIVERY THEREAFTER
SEE INTERVAL.
- REMOVE AND REPLACE FILTER ELEMENT
AT 150 FH AND 750 FH AFTER
MAJOR TANK INTERVENTION THEREAFTER
SEE INTERVAL.
NOTE 2: INCASE TASK THRESHOLD IS OVERDUE WHEN APLYING NOTE 1, THE FIRST
TIME OF TASK ACCOMPLISHMENT IS NEXT A CHECK.
NOTE 3: RII TASK
Access panels :
437AL 447AL
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 73 ENGINE FUEL CONTROL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 732200/5
AMT 732200-710-043
SIL 73-022
I 30 000 FH
ALL 732500-I1-1 FUNCTIONAL INTERFACES 210 CHK N
CHECK FOR ERRONEOUS SIGNAL POSITIONS TO THE
ZONES CONTROLLER FROM THE BLEED AND WING/
NACELLE ANTI-ICE VALVES WITH ENGINES, APU
AND PACKS OPERATING
Skills :
EN 1 0.25 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 75 ENGINE AIR
Task
code
Threshold
Interval
Ctrl References Eff
AMM 752100/6
AMT 752100-200-010
MRB 752100/01-I2
I 48 MO
ALL 752100-I1-1 NACELLE COMPT AND ACCESSORY COOLING 430 CHK
440
Y
CHECK ZONE 1 VENTILATION INLET AND EXIT FOR BLOCKAGE
Access panels :
437AL 438AR 447AL 448AR
Skills :
EN 1 0.30 MHrs
AMM 752100/6
AMT 752100-200-011
MRB 752100/02
MRB 752100/02-I2
I 7 500 FH
I 50 MO
ALL 752100-I2-1 NACELLE COMPT AND ACCESSORY COOLING 450 CHK
460
Y
CHECK ZONE 2 VENTILATION INTAKE HOLES (IN THRUST
REVERSER C-DUCTS) AND EXIT FOR BLOCKAGE
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
B2 1 0.00 MHrs
EN 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 752200/6
AMT 752200-200-010
MRB 752200/01
MRB 752200/01-I2
I 1 200 FH
I 12 MO
ALL 752200-I1-1 BEARING COMPT COOLING AND SEALING 450 GVI
460
Y
GENERAL VISUAL INSPECTION OF NO 4 BEARING COOLING AIR
TUBES FOR DAMAGE AND SECURITY AND OF THE NO 4 BEARING
COOLER AND ASSOCIATED INLET IN THE LEFT THRUST
REVERSER C-DUCTS FOR DAMAGE OR BLOCKAGE
NOTE: APPLICABILITY ONLY IAE WITH ACAC P/N D1876-1000A
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
AMT 752200-200-010 I 3 000 FH
I 20 MO
ALL 752200-I1-2 BEARING COMPT COOLING AND SEALING 450 GVI
460
N
GENERAL VISUAL INSPECTION OF NO 4 BEARING COOLING AIR
TUBES FOR DAMAGE AND SECURITY AND OF THE NO 4 BEARING
COOLER AND ASSOCIATED INLET IN THE LEFT THRUST
REVERSER C-DUCTS FOR DAMAGE OR BLOCKAGE
NOTE 1: APPLICABILITY WITH ACAC P/N D1876-5000A
NOTE 2: THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS ISS 14
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 752451/6
AMT 752451-200-010
MRB 752400/01
MRB 752400/01-I2
I 7 500 FH
I 50 MO
ALL 752400-I1-1 HP/LP TURBINE ACC SYSTEM 454 CHK
464
Y
CHECK THE ACC VALVE POSITION AND ACC VALVE ROD END
BEARING FOR LOSSENESS
Access panels :
438AR 448AR 452AR 462AR
Skills :
B2 1 0.00 MHrs
EN 1 0.20 MHrs
AMM 753242/2
AMT 753242-640-010
CMP 72-2-0401-015
SIL IAE-128
I 1 500 FH
ALL 753200-I1-1 HPC AIRFLOW CONTROL SYSTEM 450 LUB
460
N
LUBRICATION OF HPC VARIABLE STATOR VANE (VSV) MECHANISM.
NOTE : TASK IS ONLY APPLICABLE TO ENGINE
PRE SB V2500-ENG-72-0564
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 781000/6
AMT 781000-200-010
MRB 781000/01-I2
I 24 000 FH
I 160 MO
See note
ALL 781000-I1-1 MIXED EXHAUST SYSTEM 455 GVI
465
Y
GENERAL VISUAL INSPECTION OF THE EXHAUST SYSTEM
FIRE SEALS
NOTE : TASK MAY BE PERFORMED AT OPPORTUNITY OF
ENGINE REMOVAL PROVIDED INTERVAL NOT EXCEEDED.
Skills :
EN 1 0.30 MHrs
AMM 781000/6
AMT 781000-200-011
MRB 781000/02-I2
I 24 000 FH
I 160 MO
See note
ALL 781000-I2-1 MIXED EXHAUST SYSTEM 455 GVI
465
Y
GENERAL VISUAL INSPECTION OF THE COMMON NOZZLE
ASSEMBLY FIREPROOF BULKHEAD (ENGINE OR CNA REMOVED)
NOTE: -THIS TASK IS AN ALTERNATIVE TO TASK 78100-I3-1
-TASK MAY BE PERFORMED AT OPPOTUNITY OF ENGINE
Skills :
EN 1 0.30 MHrs
AMM 781000/6
AMT 781000-200-014
MRB 781000/07-I2
I 24 000 FH
I 160 MO
ALL 781000-I3-1 MIXED EXHAUST SYSTEM 455 SDI
465
Y
BORESCOPE INSPECTION OF THE COMMON NOZZLE ASSEMBLY
FIREPROOF BULKHEAD (ENGINE/CNA INSTALLED)
NOTE: THIS TASK IS AN ALTERNATIVE TO TASK 781000-I2-1
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 783200/5
AMT 783200-700-001
MRB 7832AA/04
MRB 783200/04-I2
I 15 000 FH
I 10 000 CY
I 100 MO
ALL 783100-I1-1 THRUST REVERSER CONTROL & INDICATING 450 OPC
460
Y
OPERATIONAL CHECK OF THE THRUST REVERSER LOWER
ACTUATOR LOCK MECHANISM.
Access panels :
437AL 438AR 447AL 448AR
Skills :
EN 1 1.00 MHrs
AMM 783200/6
AMT 783200-200-014
MRB 7832AA/02
MRB 7832AA/02-I2
MRB 783200/02
MRB 783201/01-I2
I 2 500 FH
I 30 MO
ALL 783200-I2-1 THRUST REVERSER HALVES 450 GVI
460
Y
DETAILED INSPECTION OF THRUST REVERSER BLOCKER DOORS
AND LINKAGES FOR CONDITION AND SECURITY (REQUIRES
PARTIAL MANUAL DEPLOYMENT OF THRUST REVERSER)
PREP. : BLOCKER DOORS DEPLOYMENT
Access panels :
437AL 438AR 447AL 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 783219/6
AMT 783219-200-010
MRB 7832BB/02
MRB 783201/02-I2
I 2 500 FH
I 30 MO
ALL 783200-I3-1 THRUST REVERSER HALVES 450 GVI
460
Y
GENERAL VISUAL INSPECTION OF THE CASCADES AND
THEIR ATTACHMENTS (REQUIRES FULL DEPLOYMENT
OF THRUST REVERSER )
PREP. : BLOCKER DOORS DEPLOYMENT
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
AMM 783200/6
AMT 783200-200-013
MRB 78.32.01/05-I2
I 6 000 FH
ALL 783200-I5-1 THRUST REVERSER COWLING SYSTEM 450 GVI
460
Y
GENERAL VISUAL INSPECTION OF INNER BARREL HEATSHIELD
AND FIRE SEALS
Access panels :
451AL 452AR 461AL 462AR
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMT 783200-210-802 I 24 MO
ALL 783201-I8-1 THRUST REVERSER COWLING SYSTEM 450 GVI
460
Y
THRUST REVERSER COWLING SYSTEM
GENERAL VISUAL INSPECTION OF THRUST REVERSER
CROSSOVER BEAMS, HINGES AND LATCHES
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 79 ENGINE OIL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 790000/6
AMT 790000-200-013
MRB 790000/01-I2
I 600 FH
I 6 MO
ALL 792000-I1-1 OIL DISTRIBUTION 435 CHK
445
N
CHECK MASTER MAGNETIC CHIP DETECTOR FOR EVIDENCE OF
METALLIC DEBRIS
Access panels :
437CL 447CL
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
AMM 792244/4
AMT 792244-920-010
MRB 791000/02
I 1 200 FH
I 12 MO
ALL 792000-I2-1 OIL DISTRIBUTION FILTER 435 DIS
445
N
REMOVE INSPECT AND REPLACE SCAVENGE FILTER
NOTE: RII TASK
Access panels :
437AL 447AL
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 79 ENGINE OIL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 792144/4
AMT 792144-920-010
MRB 791000/03
I 6 000 FH
I 40 MO
ALL 792000-I3-1 OIL DISTRIBUTION FILTER 435 DIS
445
N
REMOVE INSPECT AND REPLACE WITH A NEW
OR CLEANED PRESSURE FILTER
NOTE: RII TASK
Access panels :
437AL 447AL
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
SIL IAE261 I 5 000 CY
ALL 792000-I5-1 OIL DISTRIBUTION 435 DI
447
N
DETAILED INSPECTION OF IDG FCOC AND ENGINE FCOC
AMD 00 EFFECTIVE DATE IS NEXT C CHECK
Access panels :
437AL 447AL
Skills :
AF 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 80 STARTING
Task
code
Threshold
Interval
Ctrl References Eff
AMM 801341/6
AMT 801341-200-010
MRB 800000/01
MRB 800000/01-I2
I 600 FH
I 750 CY
I 6 MO
ALL 801300-I1-1 ENGINE STARTING SYSTEM 436 DI
446
N
INSPECTION OF STARTER MAGNETIC CHIP DETECTOR
Access panels :
438AR 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.06 MHrs
AMM 121380/3
AMT 121380-600-011
MRB 800000/02
MRB 800000/02-I2
SIL IAE052
I 600 FH
I 750 CY
I 6 MO
ALL 801300-I3-1 ENGINE STARTING SYSTEM 436 SER
446
B1
DRAIN AND REPLENISH OIL SYSTEM
Access panels :
438AR 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 80 STARTING
Task
code
Threshold
Interval
Ctrl References Eff
AMM 801351/7
AMT 801351-100-010
MRB 800000/03
MRB 800000/03-I2
I 5 000 CY
I 60 MO
ALL 801300-I4-1 ENGINE STARTING SYSTEM 436 CLN
446
N
CLEAN PNEUMATIC STARTER VALVE FILTER
Access panels :
438AR 448AR
Skills :
B2 1 0.00 MHrs
EN 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES - FAL Page : 1

LEP R 1 SEP 2013

CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMT 281800-700-001
AMT 281800/5
FAL 281800-00001-1-F
MRB 28.13.00/03
MRB 28.13.00/05
MRB 28.18.00/04
I 72 MO
ALL 281800-01-1 CENTER TANK 137 FUC
138
Y
FUNCTIONAL CHECK OF TANK VAPOUR SEAL AND VENT DRAIN
SYSTEM (SFAR88)
PREP. : 241AF OR 131NW
Skills :
AF 1 2.00 MHrs
AMM 281800/6
AMT 281800-200-001
FAL 281800-00002-1-F
MRB 28.18.00/03
I 72 MO
ALL 281800-02-1 CENTER TANK 191 DI
192
Y
DETAILED INSPECTION OF VAPOUR SEAL (SFAR88)
Access panels :
191KB 192KB
Skills :
AF 1 0.80 MHrs
Amendment No Issue No Page FAL - 28 [1 / 1] :
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 472143-700-001
FAL 470000-00001-1-F
I 12 000 FH
4669
4703
4737
4783
4826
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
470000-03-1 INERT GAS GENERATION SYSTEM 191 OP N R
OPERATIONAL CHECK OF DUAL FLOW SHUT OFF VALVE
(DFSOV), DUAL FLAPPER CHECK VALVES (DFCV) AND
NITROGEN ENRICHED AIR (NEA) LINE FOR LEAKS.
Access panels :
191BB
Skills :
AF 1 0.75 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 472043-700-001
FAL 470000-00002-1-F
I 60 000 FH
4669
4703
4737
4783
4826
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
470000-04-1 INERT GAS GENERATION SYSTEM 137 OP
138
N R
OPERATIONAL CHECK OF BOTH DUAL FLAPPER CHECK VALVES
(DFCV) FOR LEAKS.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5958
5994
Access panels :
131NW 131PW
Skills :
AF 1 0.76 MHrs
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES ASM Page : 1

LEP R 1 SEP 2013

Task
code
Threshold
Interval
Ctrl References Eff
AMT 292200-960-001
ASM 292200-00001-1-E
T 20 YE
NT Check :
ALL 292000-11-1 AUXILIARY HYDRAULIC POWER 195 RST N
REMOVE RAT AND ACTUATOR FOR OVERHAUL AND
REPLACE WITH NEW OR RECONDITIONED UNITS.
NOTE 1 : CHECK THE PART NUMBERS OF RAT AND ACTUATOR
FOR EFFECTIVITY BEFORE PERFORM THE TASK
NOTE 2 : THE INTERVAL OF THIS TASK REFER TO "A321 TIME
NOTE 3: RII TASK
Access panels :
147BB 147CB 195BB 734
Skills :
AF 1 1.00 MHrs
Amendment No Issue No Page ASM - 29 [1 / 1] :
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES - STR Page : 1

LEP R 1 SEP 2013

CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/6
AMT 282800-200-004
T 6 YE
I 6 YE
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
282801-01-1 ACT EXTERNAL SURFACE 151 DI
152
N R
DETAILED INSPECTION OF ADDITIONAL CENTER TANK
(ACT), EXTERNAL SURFACE
NOTE: ACT SERIAL NUMBER TO BE TRACKED SINCE
TASK ACCOMPLISHMENT IS A FUNCTION OF ACT AGE
AND NOT OF AIRCRAFT AGE
NOTE: ACT
INTERGRATED WALL IMPACT REMOVED
Skills :
AF 1 0.40 MHrs
Amendment No Issue No Page STR - 28 [1 / 3] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/6
AMT 282800-200-005
MRB 282802-01-1
T 12 YE
I 12 YE
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
282802-01-1 ACT INTERNAL STRUCTURE 151 DI
152
N R
DETAILED INSPECTION OF ADDITIONAL CENTER TANK (ACT),
INTERNAL STRUCTURE
NOTE: ACT SERIAL NUMBER TO BE TRACKED, SINCE TASK
ACCOMPLISHMENT IS A FUNCTION OF ACT AGE AND NOT OF
AIRCRAFT AGE (THRESHOLD AND INTERVAL ARE 10 ACT YEARS)
PREP: ACT ACCESS PANEL
ACT REMOVED;
BLADDER TANK REMOVED
INTEGRATED IMPACT WALL REMOVED
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 28 FUEL
Task
code
Threshold
Interval
Ctrl References Eff
AMM 282800/6
AMT 282800-200-008
MRB 282803-01-1
NTM 282803
T 32 000 CY
I 13 300 CY
See note
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
282803-01-1 ACT EXTERNAL SURFACE 151 SDI
152
N R
SPECIAL DETAILED INSPECTION (HFEC) OF ADDITIONAL
CENTER TANK (ACT), EXTERNAL SURFACE, IN AREA OF
TANKPLATE PROFILES
NOTE: ACT SERIAL NUMBER TO BE TRACKED, SINCE TASK
ACCOMPLISHMENT IS A FUNCTION OF ACT USAGE PARAMETER
(ACT FC) AND NOT OF AIRCRAFT USAGE PARAMETER
(THRESHOLD & INTERVAL ARE 32000 ACT CY & 13300 ACT CY)
PREP: ACT
INTEGRATED IMPACT WALL
Skills :
NDT 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 321100/6
AMT 321100-200-008
MRB 321101-01-2
T 6 YE
I 6 YE
ALL 321101-01-2 MAIN GEAR 731 DI
741
Y
DETAILED INSPECTION OF MAIN LANDING GEAR, SLIDING
TUBE (TWIN WHEEL), BRAKE ATTACHMENT FLANGE, UPPER AND
LOWER TORQUE LINKS, UPPER AND LOWER TORQUE LINK PINS
AND APEX PIN & NUT - EXTERNAL SURFACES, EXCEPT WHERE
COVERED BY DRESSINGS AND BUSH FLANGES.
TPS : TPS MUST NOT BE APPLIED
PREP.: AIRCRAFT JACKED, SLIDING TUBE FULLY
EXTENDED.;
NOTE : CPCP
Skills :
AF 1 0.80 MHrs
AMM 321100/6
AMT 321100-200-009
MRB 321103-01-1
T 6 YE
I 6 YE
ALL 321103-01-1 MAIN GEAR 731 DI
741
Y
DETAILED INSPECTION OF MAIN LANDING GEAR, MAIN
FITTING, FORWARD PINTLE PIN, FORWARD PINTLE PIN LOCK/
STUB BOLTS, REAR PINTLE PIN & NUT, RETRACTION
ACTUATOR ATTACHMENT PINS & UPPER DIAPHRAGM CROSS PIN
- EXTERNAL SURFACES, EXCEPT WHERE COVERED BY
DRESSINGS & BUSH FLANGES.
NOTE : CPCP
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 321100-200-018
MRB 321146-01-1
T 6 YE
I 6 YE
ALL 321146-01-1 MAIN LANDING GEAR PARTS 731 DI
741
Y
DETAILED INSPECTION OF MAIN LANDING GEAR, RETRACTION
ACTUATOR - EXTERNAL SURFACE, EXCEPT WHERE COVERED BY
DRESSINGS & BUSH FLANGES.
NOTE : CPCP
Skills :
AF 1 1.20 MHrs
AMT 321100-200-019
MRB 321156-01-1
T 6 YE
I 6 YE
ALL 321156-01-2 MAIN LANDING GEAR PARTS 731 DI
741
Y
DETAILED INSPECTION OF MAIN LANDING GEAR, UPPER &
LOWER SIDESTAY, UPPER & LOWER CARDANS AND NUTS, UPPER
& LOWER LOCK LINKS, LOCKSTAY CARDAN, LOCKSTAY CARDAN
BRACKET & BOLTS, CUFF, TRIANGULATION LINK, BANANA
LINKS, UPPER & LOWER CARDAN PINS, SIDESTAY PIVOT PIN,
UPPER PIN (SPRINGS), LOCKSTAY CARDAN PIN, UPPER &
LOWER LOCK LINK PINS, LOCK LINK CENTER PIN,
TRIANGULATION LINK PINS, LOCK LINK/BANANA LINK PIN,
CUFF PINS & LOWER (SPRINGS) PIN - EXTERNAL SURFACES,
EXCEPT WHERE COVERED BY DRESSINGS, BUSH FLANGES &
FITTINGS.
NOTE : CPCP
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 322100-200-018
MRB 322141-01-1
T 6 YE
I 6 YE
ALL 322141-01-1 NOSE LANDING GEAR PARTS 711 DI Y
DETAILED INSPECTION OF NOSE LANDING GEAR, BARREL,
SLIDING TUBE AND TURNING TUBE EXTERNAL SURFACES,
EXCEPT WHERE COVERED BY DRESSINGS AND BUSH FLANGES.
PREP.: AIRCRAFT JACKED, SLIDING TUBE FULLY
EXTENDED.;
NOTE : CPCP
Skills :
AF 1 0.50 MHrs
AMT 322100-200-013
MRB 322142-01-1
T 6 YE
I 6 YE
DETAILED INSPECTION OF NOSE LANDING GEAR, TORQUE
LINKS - EXTERNAL SURFACES, EXCEPT WHERE COVERED BY
DRESSINGS AND BUSH FLANGES.
NOTE : CPCP
Skills :
AF 1 0.50 MHrs
AMT 322100-200-014
MRB 322143-01-1
T 6 YE
I 6 YE
DETAILED INSPECTION OF NOSE LANDING GEAR, FORESTAY
UPPER PANEL, LOWER LINK AND UNIVERSAL JOINT -
EXTERNAL SURFACES, EXCEPT WHERE COVERED BY DRESSINGS
AND BUSH FLANGES.
NOTE : CPCP
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 322100-200-012
MRB 322144-01-1
T 6 YE
I 6 YE
DETAILED INSPECTION OF NOSE LANDING GEAR, LOCK LINK
UPPER AND LOCK LINK LOWER - EXTERNAL SURFACES, EXCEPT
WHERE COVERED BY DRESSINGS AND BUSH FLANGES.
NOTE : CPCP
Skills :
AF 1 0.50 MHrs
AMT 322100-200-009
MRB 322145-01-1
T 6 YE
I 6 YE
DETAILED INSPECTION OF NOSE LANDING GEAR, UPPER
BARREL HINGE PINS, FORESTAY BARREL PIN, ACTUATING
CYLINDER PINS, RETAINING NUT SHOCK ASSY, TORQUE LINK
PINS, TORQUE LINK APEX PIN AND NUT, UPPER PANEL TO
STRUCTURE PINS, UPPER PANEL TO UNIVERSAL JOINT PIN,
LOCK LINK CENTRE PIN, LOWER LOCK LINK PIN, LOWER LOCK
LINK TO UNIVERSAL JOINT PIN AND CROSS PIN - EXTERNAL
SURFACES, EXCEPT WHERE COVERED BY DRESSINGS AND BUSH
FLANGES.
NOTE : CPCP
Skills :
AF 1 0.50 MHrs
AMT 322100-200-015
MRB 322151-01-1
T 6 YE
I 6 YE
DETAILED INSPECTION OF NOSE LANDING GEAR, ACTUATING
CYLINDER - EXTERNAL SURFACES, EXCEPT WHERE COVERED BY
DRESSINGS AND BUSH FLANGES.
NOTE : CPCP
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 361148/6
AMT 361148-790-001
MRB 360000/10
SIL 36-047
I 22 000 FH
I 144 MO
ALL 361148-01-1 AIR BLEED DUCTS, WING 500 CHK
600
N
PERFORM LEAK CHECK ON BLEED AIR DUCTING IN THE
WING AREA BETWEEN BLEED AIR PRECOOLER,WING
ANTI ICE VALVE AND WING/FUSELAGE CONNECTION
NOTE :
- TASK MAY BE COMBINED WITH TASKS
361200-02-3 AND 361200-03-1
- DEPENDING ON OPERATING ENVIRONMENT AND
Access panels :
521AB 521CB 521EB 621AB 621CB 621EB
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521100/6
AMT 521100-200-001
MRB 521101-01-1
T 12 YE
I 12 YE
ALL 521101-01-1 FWD PAX/CREW DOOR STOP ASSEMBLIES 831 DI
841
Y
DETAILED INSPECTION OF DOOR STOP ASSEMBLIES ON
FORWARD PASSENGER/CREW DOOR, LH/RH
NOTE : CPCP
Access panels :
831 841
Skills :
AF 1 0.46 MHrs
AMM 521100/6
AMT 521100-200-002
MRB 521104-01-1
T 12 YE
I 6 YE
ALL 521104-01-1 FWD PAX/CREW DOOR INTERNAL STRUCTURE 831 DI
841
Y
DETAILED INSPECTION OF FORWARD PASSENGER/CREW DOOR,
INTERNAL STRUCTURE, LH/RH
TPS: APPLICATION OF TPS TYPE 1 PLUS A SUBSEQUENT
PREP: LINING REMOVED
INSULATION REMOVED
NOTE: CPCP
Access panels :
831 841
Skills :
AF 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 521300/6
AMT 521300-200-001
MRB 521301-01-1
T 12 YE
I 12 YE
ALL 521301-01-1 AFT PAX/CREW DOOR STOP ASSEMBLIES 832 DI
842
Y
DETAILED INSPECTION OF DOOR STOP ASSEMBLIES ON AFT
PASSENGER/CREW DOOR, LH/RH
NOTE : CPCP
Access panels :
832 842
Skills :
AF 1 0.40 MHrs
AMM 521300/6
AMT 521300-200-002
MRB 521304-01-1
T 12 YE
I 6 YE
ALL 521304-01-1 AFT PAX/CREW DOOR INTERNAL STRUCTURE 832 DI
842
Y
DETAILED INSPECTION OF AFT PASSENGER/CREW DOOR,
TPS: APPLICATION OF TPS TYPE 1 PLUS A SUBSEQUENT
INSULATION REMOVED
NOTE: CPCP
Access panels :
832 842
Skills :
AF 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 522211/6
AMT 522211-200-001
MRB 522202-01-1
T 12 YE
I 6 YE
ALL 522202-01-1 FWD EMERGENCY EXITS, INTERNAL 833 DI
843
N
DETAILED INSPECTION OF FORWARD EMERGENCY EXITS,
INSULATION REMOVED
NOTE: CPCP
Access panels :
833 843
Skills :
AF 1 2.00 MHrs
AMM 522211/6
AMT 522211-200-002
MRB 522205-01-1
T 12 YE
I 6 YE
ALL 522205-01-1 AFT EMERGENCY EXITS INTERNAL 834 DI
844
N
DETAILED INSPECTION OF AFT EMERGENCY EXITS, INTERNAL
STRUCTURE, LH/RH
INSULATION REMOVED
NOTE: CPCP
Access panels :
843 844
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 523111/6
AMT 523111-200-001
MRB 523103-01-1
T 12 YE
I 6 YE
ALL 523103-01-1 FWD CARGO DOOR INTERNAL STRUCTURE 825 DI Y
DETAILED INSPECTION OF FORWARD CARGO COMPARTMENT
DOOR, INTERNAL STRUCTURE
INSULATION REMOVED
NOTE: CPCP
Access panels :
825
Skills :
AF 1 1.50 MHrs
AMM 523111/6
AMT 523111-200-022
MRB 523105-01-3
T 5 300 CY
I 5 300 CY
ALL 523105-01-3 FWD CARGO COMPARTMENT DOOR ACTUATOR 825 GVI Y
COMPARTMENT DOOR, ACTUATOR ATTACH FITTINGS
Access panels :
825
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 523111/6
AMT 523111-200-005
MRB 523109-01-1
T 110 200 FH
T 55 100 CY
T 12 YE
I 11 800 FH
I 5 900 CY
I 6 YE
ALL 523109-01-1 FWD CARGO DOOR LOCKING HOOKS 825 DI Y
DETAILED INSPECTION OF LOCKING HOOKS AND FORK
FITTINGS OF FORWARD CARGO COMPARTMENT DOOR AT ALL
FRAMES, BETWEEN LONGERON 4 AND LONGERON 5 (6 PLACES)
NOTE 1: 100% LIMIT = 12 YE
NOTE 3: CPCP
Access panels :
825 825AR
Skills :
AF 1 1.35 MHrs
AMM 523211/6
AMT 523211-200-001
MRB 523113-01-1
T 12 YE
I 6 YE
ALL 523113-01-1 AFT CARGO DOOR INTERNAL STRUCTURE 826 DI Y
DETAILED INSPECTION OF AFT CARGO COMPARTMENT DOOR,
INTERNAL STRUCTURE
INSULATION REMOVED
NOTE: CPCP
Access panels :
826
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 523211/6
AMT 523211-200-022
MRB 523115-01-3
T 5 300 CY
I 5 300 CY
ALL 523115-01-3 AFT CARGO DOOR ACTUATOR ATTACH FITTINGS 826 GVI Y
DOOR, ACTUATOR ATTACH FITTINGS
Access panels :
826
Skills :
AF 1 0.10 MHrs
AMM 523211/6
AMT 523211-200-006
MRB 523119-01-2
T 110 200 FH
T 55 100 CY
T 12 YE
I 11 800 FH
I 5 900 CY
I 6 YE
ALL 523119-01-2 AFT CARGO DOOR LOCKING HOOKS 826 DI Y
DETAILED INSPECTION OF LOCKING HOOKS AND FORK
FITTINGS OF AFT CARGO COMPARTMENT DOOR AT ALL FRAMES,
BETWEEN LONGERON 4 AND LONGERON 5 (6 PLACES)
NOTE 3: CPCP
Access panels :
826 826AR
Skills :
AF 1 1.35 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 523311/6
AMT 523311-200-003
MRB 523303-01-1
T 12 YE
I 6 YE
ALL 523303-01-1 BULK CARGO DOOR INTERNAL 827 DI Y
DETAILED INSPECTION OF BULK CARGO COMPARTMENT DOOR,
INTERNAL STRUCTURE
PREP : LINING REMOVED
INSULATION REMOVED
NOTE : CPCP
Access panels :
827
Skills :
AF 1 0.20 MHrs
AMM 523311/6
AMT 523311-200-002
MRB 523305-01-1
T 12 YE
I 12 YE
ALL 523305-01-1 BULK CARGO DOOR FITTINGS AREA 827 DI Y
DETAILED INSPECTION OF BULK CARGO COMPARTMENT DOOR
STOP FITTINGS AND ATTACHMENT AREA, EXTERNAL AND
INTERNAL
INSULATION REMOVED
NOTE 1: 100 % LIMIT=12 YE
NOTE 3: CPCP
Access panels :
827
Skills :
AF 1 0.75 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 524111/6
AMT 524111-200-001
MRB 524111-01-1
T 12 YE
I 12 YE
ALL 524111-01-1 FWD AVIONIC DOOR INTERNAL STRUCTURE 811 DI Y
DETAILED INSPECTION OF FORWARD AVIONICS COMPARTMENT
ACCESS DOOR, INTERNAL STRUCTURE, INCLUDING HINGE ARMS
PREP: DOOR FLOOR PANEL REMOVED
NOTE: CPCP
Access panels :
811
Skills :
AF 1 0.20 MHrs
AMM 524114/6
AMT 524114-200-001
MRB 524121-01-1
T 12 YE
I 6 YE
ALL 524121-01-1 AFT AVIONIC DOOR INTERNAL STRUCTURE 824 DI Y
DETAILED INSPECTION OF AFT AVIONICS COMPARTMENT
ACCESS DOOR, INTERNAL STRUCTURE
NOTE: CPCP
Access panels :
824
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 524113/6
AMT 524113-200-001
MRB 524131-01-1
T 12 YE
I 6 YE
ALL 524131-01-1 LATERAL RIGHT AVIONIC DOOR 822 DI Y
DETAILED INSPECTION OF LATERAL RIGHT AVIONICS
COMPARTMENT ACCESS DOOR, INTERNAL STRUCTURE
INSULATION REMOVED
NOTE: CPCP
Access panels :
822
Skills :
AF 1 0.20 MHrs
AMM 524112/6
AMT 524112-200-001
MRB 524141-01-1
T 12 YE
I 6 YE
ALL 524141-01-1 LATERAL LEFT AVIONIC DOOR 812 DI Y
DETAILED INSPECTION OF LATERAL LEFT AVIONICS
COMPARTMENT ACCESS DOOR, INTERNAL STRUCTURE
INSULATION REMOVED
NOTE: CPCP
Access panels :
812
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 528100/6
AMT 528100-200-001
MRB 528101-01-1
T 6 YE
I 6 YE
ALL 528101-01-1 MLG DOOR FWD AND AFT FITTING 734 DI
744
Y
DETAILED INSPECTION OF MLG DOOR, FORWARD AND AFT
FITTINGS, LH/RH
NOTE: CPCP
Access panels :
734 744
Skills :
AF 1 0.40 MHrs
AMT 528100-280-801
MRB 528106-01-1
NTM 52-81-06
T 18 800 CY
I 3 600 CY
ALL 528106-01-1 MAIN GEAR DOORS 734 NDT
744
N
SPECIAL DETAILED INSPECTION (HFEC & US) OF MLG DOOR
ACTUATOR LUGS, LH/RH.
NOTE: FOR PRE 24903 AIRCRAFT RETROFITTED, THRESHOLD
IS TO BE COUNTED FROM SB 52-1073 EMBODIMENT
PREPARATION: ACTUATOR REMOVED;
Access panels :
734 744
Skills :
B1 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 528200/6
AMT 528200-200-001
MRB 528211-01-1
T 6 YE
I 6 YE
ALL 528211-01-1 NLG MAIN DOOR HINGES 713 DI
714
Y
DETAILED INSPECTION OF NLG, MAIN DOOR HINGES, LH/RH
NOTE: CPCP
Access panels :
713 714
Skills :
AF 1 0.40 MHrs
AMM 528200/6
AMT 528200-200-002
MRB 528221-01-1
T 6 YE
I 6 YE
ALL 528221-01-1 NLG SECONDARY DOOR HINGES 715 DI
716
Y
DETAILED INSPECTION OF NLG, SECONDARY DOOR HINGES,
LH/RH
NOTE: CPCP
Access panels :
715 716
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 52 DOORS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 528200-220-801
MRB 528223-01-1
T 26 000 CY
I 7 500 CY
ALL 528223-01-1 NOSE GEAR DOORS 715 DI
716
N
DETAILED INSPECTION OF NLG AFT DOOR AFT FITTINGS,
LH/RH
Access panels :
715 716
Skills :
AF 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-002
MRB 531104-01-1
T 96 000 FH
T 48 000 CY
I 16 000 FH
I 8 000 CY
ALL 531104-01-1 DOOR FRAME FWD LOWER CORNER 220 DI Y
FRAME, FORWARD LOWER CORNER UNDERNEATH THE SCUFF
PLATE, LH/RH
PREP. : FWD CORNER SCUFF PLATE REMOVED
Skills :
AF 1 0.90 MHrs
AMM 531100/6
AMT 531100-210-028
MRB 531104-02-1
NTM 53-11-04
T 96 000 FH
T 48 000 CY
I 32 200 FH
I 16 100 CY
ALL 531104-02-1 DOOR FRAME EXTERNAL SURFACE 220 SDI Y
SPECIAL DETAILED INSPECTION (US) OF FORWARD
PASSENGER/CREW DOOR FRAME, FORWARD LOWER CORNER
UNDERNEATH THE SCUFF PLATES, LH/RH.
PREP. : FWD CORNER SCUFF PLATE REMOVED
Skills :
NDT 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-003
MRB 531107-01-1
T 30 000 CY
I 20 000 CY
ALL 531107-01-1 FWD PRESSURE BULKHEAD 110 DI Y
DETAILED INSPECTION OF FORWARD FACE OF PRESSURE
BULKHEAD, VERTICAL ANGLE (Y=675) AT CROSSING AREAS
WITH HORIZONTAL STIFFENERS (Z=1 AND Z=1329), LH/RH
PREP.: UPPER PROTECTIVE SHIELD
NOTE : SAMPLING 20%
Access panels :
110AL
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-008
MRB 531120-01-1
T 30 000 CY
I 18 500 CY
ALL 531120-01-1 UPPER LAP JOINT EXTERNAL SURFACE 200 DI Y
DETAILED INSPECTION OF UPPER SKIN OF UPPER
LONGITUDINAL LAP JOINT, BETWEEN FR 15 AND FR 16 AND
FR 20 AND FR 24, EXTERNAL SURFACE, LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.30 MHrs
AMM 531100/6
AMT 531100-210-009
MRB 531121-01-1
T 30 000 CY
I 16 600 CY
ALL 531121-01-1 LAT LAP JOINT FR 11-14, FR 20-24 100 DI Y
DETAILED INSPECTION OF OUTER SKIN OF LATERAL
LONGITUDINAL LAP JOINT, BETWEEN FR 11 AND FR 14 AND
FR 20 AND FR 24, LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-010
MRB 531123-01-1
T 6 YE
I 6 YE
ALL 531123-01-1 LAT LAP JOINT FR 01-24 100 DI Y
DETAILED INSPECTION OF OUTER SKIN OF LATERAL
LONGITUDINAL LAP JOINT, BETWEEN FR 1 AND FR 24, LH/RH
NOTE 1 : 100% LIMIT = 24 YE
NOTE 3 : CPCP
Skills :
AF 1 0.60 MHrs
AMT 531100-220-805
MRB 531125-02-1
T 33 000 CY
I 29 800 CY
ALL 531125-02-1 NOSE FORWARD FUSELAGE 211 DI
212
N
DETAILED INSPECTION OF CENTRAL/LATERAL WINDOW FRAME
AROUND FASTENER HOLE, UPPER AREA, LH/RH
PREPARATION: SLIDING WINDOW OPENED;
NOTE: SAMPLING 20%
Skills :
AF 1 0.00 MHrs
AMM 531100/6
AMT 531100-210-013
MRB 531131-01-1
T 30 000 CY
I 20 000 CY
ALL 531131-01-1 WINDSHIELD CTR POST UPR ATTACHMENT 211 DI
212
Y
DETAILED INSPECTION OF WINDSHIELD CENTER POST, UPPER
ATTACHMENT AREA, INTERNAL SIDE
NOTE : SAMPLING 20%
Access panels :
211LC 211MC 211MW 212LC
Skills :
AF 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-015
MRB 531141-01-1
T 30 000 CY
I 9 200 CY
ALL 531141-01-1 SIDE WINDOW STRUCTURE 200 DI Y
DETAILED INSPECTION OF SIDE WINDOW STRUCTURE, UPPER
JUNCTION, BETWEEN FORWARD AND REAR FR, EXTERNAL
SURFACE, LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-017
MRB 531151-01-1
T 12 YE
I 12 YE
ALL 531151-01-1 DOOR STOP FITTINGS 221 DI
222
Y
DETAILED INSPECTION OF DOOR STOP FITTINGS ON FR 16
AND FR 20, LH/RH
NOTE : CPCP
Access panels :
831 841
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-025
MRB 531153-02-1
NTM 53-11-53
T 30 000 CY
I 17 700 CY
ALL 531153-02-1 DOOR STOPS AT FR 16 221 SDI
222
Y
SPECIAL DETAILED INSPECTION (HFEC) OF DOOR FR 16, AT
DOUBLE JOGGLE AREA IN OUTER FLANGE OF FR, AT DOOR
STOPS NUMBER 1 AND 7 LOCATION, LH/RH.
PREP.: BOLTS REMOVED
LINING REMOVED
INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
831 841
Skills :
NDT 1 1.00 MHrs
AMM 531100/6
AMT 531100-210-803
MRB 531161-01-1
T 6 YE
I 6 YE
ALL 531161-01-1 NLG BAY ALL PANELS 123 GVI Y
GENERAL VISUAL INSPECTION OF NLG BAY, ALL PANELS,
LH/RH
NOTE: CPCP
Access panels :
713 714
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-018
MRB 531162-01-2
T 60 000 FH
T 30 000 CY
I 38 300 FH
I 19 100 CY
ALL 531162-01-2 NLG BAY 127 DI
128
Y
DETAILED INSPECTION OF NLG BAY, REAR PANEL AFT FACE,
LOWER CORNERS, LH/RH.
NOTE : SAMPLING 20%
PREP.: LADDER REMOVED;
FLOOR PANEL REMOVED;
Access panels :
824
Skills :
AF 1 0.90 MHrs
AMM 531100/6
AMT 531100-210-019
MRB 531163-01-1
T 6 YE
I 6 YE
ALL 531163-01-1 FWD PAX/CREW DOOR SURROUND 221 DI
222
Y
FORWARD PASSENGER/CREW DOOR, ABOVE CABIN FLOOR LEVEL,
BETWEEN FR 15 AND FR 21 AND BETWEEN STRINGER 8 AND
STRINGER 23, LH/RH
PREP: CEILING PANELS REMOVED
LINING REMOVED
INSULATION REMOVED
NOTE 1:CPCP
NOTE 2:EXCLUDED AREA COVERED BY TASKS 531166-01-1 AND
531166-01-2
Access panels :
831 841
Skills :
AF 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-801
MRB 531164-01-1
T 6 YE
I 6 YE
ALL 531164-01-1 FUSELAGE FR 15-21 125 DI
126
Y
DETAILED INSPECTION OF FUSELAGE INTERNAL STRUCTURE,
BELOW FORWARD PASSENGER/CREW DOOR AND CABIN FLOOR
LEVEL, FROM FR 15 TO FR 21 AND BETWEEN STRINGER 28 LH
AND STRINGER 28 RH.
PREP: INSULATION REMOVED
NOTE: CPCP
Access panels :
812 824
Skills :
AF 1 1.30 MHrs
AMM 531100/6
AMT 531100-220-006
MRB 531166-01-2
T 6 YE
I 6 YE
ALL 531166-01-2 FUSELAGE FR 16-20 221 DI
222
Y
DETAILED INSPECTION OF FWD PASSENGER/CREW DOOR CUTOUT
LOWER CORNERS INTERNAL STRUCTURE ABOVE CABIN FLOOR
LEVEL, AT FR 16 AND FR 20 FROM STRINGER 22 TO
STRINGER 23 AND AROUND GIRT BAR FITTINGS, LH/RH.
NOTE:CPCP
PREP: BLANKING PLATE REMOVED; GIRT BAR FITTING REMOVED
Access panels :
831 832
Skills :
AF 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-036
MRB 531167-01-1
T 6 YE
I 6 YE
ALL 531167-01-1 AREA BELOW BATTERIES 126 DI Y
BELOW BATTERIES, BETWEEN FR 10 AND FR 16, RH
NOTE: CPCP
Access panels :
822
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-804
MRB 531169-01-1
T 6 YE
I 6 YE
ALL 531169-01-1 FUSELAGE FR 12-15 125 GVI
126
Y
GENERAL VISUAL INSPECTION OF FUSELAGE INTERNAL
STRUCTURE, BELOW GALLEY AND TOILET, BETWEEN FR 12 AND
FR 15 AND BETWEEN STRINGER 23 LH AND STRINGER 23 RH
NOTE: CPCP
Access panels :
812 822
Skills :
AF 1 3.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-020
MRB 531171-01-1
T 6 YE
I 6 YE
ALL 531171-01-1 NLG SECONDARY DOOR HINGE SUPPORTS 123 DI
124
Y
DETAILED INSPECTION OF NLG, SECONDARY DOOR HINGE
SUPPORTS ON FUSELAGE, LH/RH
NOTE: CPCP
Access panels :
715 716
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-032
MRB 531172-01-1
T 30 000 CY
I 14 000 CY
ALL 531172-01-1 SKIN FR21-23 & FR17-18 FROM STGR 31-36 100 DI Y
DETAILED INSPECTION OF FUSELAGE SKIN, BETWEEN FR 21
AND FR 23 LH AND FR 17 AND FR 18 RH, FROM STRINGER 31
TO STRINGER 36
NOTE : SAMPLING 20%
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-040
MRB 531175-01-1
T 12 YE
I 12 YE
ALL 531175-01-1 FWD FACE OF FRONT PRESSURE BULKHEAD 110 DI Y
DETAILED INSPECTION OF FORWARD FACE OF FRONT PRESSURE
BULKHEAD ATTACHED TO FR 1
PREP. : PROTECTIVE SHIELD
NOTE 4: CPCP
Access panels :
110AL
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-041
MRB 531176-01-1
T 6 YE
I 6 YE
ALL 531176-01-1 COCKPIT SIDE WINDOWS FRAMEWORK 200 DI Y
DETAILED INSPECTION OF COCKPIT SIDE WINDOWS, EXTERNAL
VISIBLE PORTION OF FRAMEWORK, BETWEEN FR 4 AND FR 12,
LH/RH
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-042
MRB 531177-01-1
T 12 YE
I 12 YE
ALL 531177-01-1 COCKPIT WINDSHIELD FRAME 200 DI Y
DETAILED INSPECTION OF COCKPIT WINDSHIELD, EXTERNAL
PORTION OF FRAMEWORK COVERED BY RETAINERS
PREP: WINDSHIELD RETAINERS
NOTE: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-043
MRB 531178-01-1
T 6 YE
I 6 YE
ALL 531178-01-1 COCKPIT WINDSHIELD RETAINERS 200 DI Y
DETAILED INSPECTION OF COCKPIT WINDSHIELD, EXTERNAL
VISIBLE PORTION OF RETAINERS
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
AMM 531100/6
AMT 531100-210-044
MRB 531180-01-1
T 12 YE
I 12 YE
ALL 531180-01-1 FWD PAX/CREW DOOR UNDER SCUFF-PLATE 100 DI Y
CUTOUT, UNDERNEATH THE SCUFF-PLATE, LH/RH
PREP: SCUFF PLATE REMOVED
NOTE: CPCP
Access panels :
831 841
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-035
MRB 531181-01-1
T 6 YE
I 6 YE
ALL 531181-01-1 FUSELAGE INTL STRUCT FR15-21, STR23-28 129 DI Y
AND LOWER SURFACE OF CABIN FLOOR STRUCTURE FROM FR 15
TO FR 21, BETWEEN STRINGER 23 AND STRINGER 28 LH/RH
NOTE 1: TII TPS MAY BE LIMITED TO LOWER SURFACE OF
CABIN FLOOR STRUCTURE BETWEEN FR15 AND FR21
PREP. : CABIN FLOOR PANELS REMOVED
STAIRS DEPLOYED (IF INSTALLED)
NOTE 2: CPCP
Access panels :
812 813 824
Skills :
AF 1 2.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 531100-210-814
MRB 531185-01-1
T 12 YE
I 12 YE
ALL 531185-01-1 FUSELAGE INTERNAL STRUCTURE 211 GVI
212
221
222
223
224
231
232
233
234
Y
STRUCTURE, FROM FR 1 TO FR 24, ABOVE CABIN FLOOR
LEVEL, AS FAR AS VISIBLE.
PREP. : AIR CONDITIONING DUCTS REMOVED;
LINING AND CEILING PANELS REMOVED;
INSULATION DISPLACED;
NOTE 1: CPCP
Skills :
AF 1 15.80 MHrs
AMM 531100/6
AMT 531100-210-046
MRB 531186-01-1
T 12 YE
I 12 YE
ALL 531186-01-1 AFT FACE OF FWD PRESSURE BULKHEAD 211 DI
212
Y
DETAILED INSPECTION OF AFT FACE OF FORWARD PRESSURE
BULKHEAD, ABOVE COCKPIT FLOOR LEVEL, INCLUDING FR 1,
AS FAR AS VISIBLE
PREP. : INSULATION DISPLACED
WIRING BUNDLES DISPLACED
NOTE 3: CPCP
Skills :
AF 1 0.85 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-047
MRB 531187-01-1
T 12 YE
I 12 YE
ALL 531187-01-1 COCKPIT WINDOW FRAMES 211 DI
212
Y
DETAILED INSPECTION OF COCKPIT WINDOW FRAMES AND
CLOSING PANELS, INTERNAL STRUCTURE (FR 12 AND
FORWARD).
PREP. : - INSULATION DISPLACED
- LINING REMOVED
- ELECTRONIC DEVICES DISPLACED
NOTE 3: CPCP
Access panels :
811
Skills :
AF 1 0.40 MHrs
AMM 531100/6
AMT 531100-210-048
MRB 531188-01-1
T 12 YE
I 12 YE
ALL 531188-01-1 COCKPIT FLOOR STRUCTURE 211 DI
212
Y
DETAILED INSPECTION OF COCKPIT FLOOR STRUCTURE,
BETWEEN FR 1 AND FR 12
PREP: COCKPIT FLOOR PANELS
RUBBER LEVELLING STRIPS
NOTE: CPCP
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-049
MRB 531189-01-2
T 6 YE
I 6 YE
ALL 531189-01-2 FUSELAGE FR 12-21 NT DI Y
DETAILED INSPECTION OF CABIN FLOOR STRUCTURE BETWEEN
FR 12 AND FR 21
PREP: CABIN FLOOR PANELS
GALLEYS
TOILET REMOVAL/INSTALLATION
NOTE 1: CPCP
NOTE 2: WORKING ZONES: 211, 212, 221, 222, 231, 232
Access panels :
NONE
Skills :
AF 1 9.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-805
MRB 531190-01-2
T 12 YE
I 12 YE
ALL 531190-01-2 FLOOR STRUCTURE FR 21 TO FR 24 NT GVI Y
GENERAL VISUAL INSPECTION OF CABIN FLOOR STRUCTURE,
EXCLUDING AREAS BELOW GALLEYS AND TOILETS, BETWEEN FR
21 AND FR 24
PREP. : CABIN FLOOR PANELS
NOTE 1: CPCP
NOTE 2: WORKING ZONES 221, 222, 231, 232
Access panels :
NONE
Skills :
AF 4 4.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-220-002
MRB 531191-01-1
T 12 YE
I 12 YE
ALL 531191-01-1 AFT FACE OF FWD PRESSURE BULKHEAD 121 DI
122
Y
DETAILED INSPECTION OF AFT FACE OF FORWARD PRESSURE
BULKHEAD, BELOW COCKPIT FLOOR LEVEL, INCLUDING FR 1
AND STRINGER CONNECTIONS.
NOTE 1: IF CORROSION IS FOUND ON THE PRESSURE BULKHEAD
ABOVE THE AVIONICS FLOOR PANELS THE COMPLETE AFT FACE
(UPPER AND LOWER AREAS) OF THE PRESSURE BULKHEAD IS
TO BE INSPECTED.
PREP. : - FORWARD AVIONICS BAY FLOOR PANELS REMOVED
- INSULATION DISPLACED
- WIRING BUNDLES DISPLACED
NOTE 2: CPCP
Access panels :
NONE 811
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-806
MRB 531192-01-1
T 12 YE
I 12 YE
ALL 531192-01-1 FUSELAGE FR 1 TO 12 121 GVI
122
125
126
Y
STRUCTURE AND FLOOR STRUCTURE, INCLUDING NLG BAY
PANELS, BETWEEN FR 1 AND FR 12, BELOW COCKPIT FLOOR
PANELS
NOTE 1: TPS MAY BE LIMITED TO FUSELAGE INTERNAL
STRUCTURE BETWEEN FR1 AND FR12 AND AFT FACE OF
PRESSURE BULKHEAD, FROM STRINGER 32, LH/RH TO
BOTTOM CENTERLINE
PREP. : AIR DUCT. FORWARD AVIONICS BAY FLOOR PANELS REMOVED
INSULATION REMOVED
NOTE 2: CPCP
Access panels :
NONE 811 812 822
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-210-807
MRB 531193-01-1
T 12 YE
I 12 YE
ALL 531193-01-1 FUSELAGE FR 21 TO 24 127 GVI
128
Y
STRUCTURE AND FLOOR STRUCTURE, INCLUDING NLG BAY AFT
FACE, BETWEEN FR 21 AND FR 24, BELOW CABIN FLOOR
PANELS
NOTE 1: TPS MAY BE LIMITED TO FUSELAGE INTERNAL
STRUCTURE BETWEEN FR 21 AND FR 24, FROM
STRINGER 32, LH/RH TO BOTTOM CENTERLINE
PREP. : AVIONICS BAY FLOOR PANELS REMOVED
NOTE 2: CPCP
Access panels :
NONE 824
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 531100/6
AMT 531100-220-003
MRB 531194-01-2
T 6 YE
I 6 YE
ALL 531194-01-2 FLOOR STRUCTURE FR 21 TO 24 221 DI
222
231
232
Y
DETAILED INSPECTION OF CABIN FLOOR STRUCTURE, BELOW
AND 0.5M AROUND GALLEYS AND TOILETS, BETWEEN FR 21
AND FR 24
GALLEYS
NOTE: CPCP
NOTE: TASK ONLY APPLICABLE IF GALLEYS/TOILETS
INSTALLED BETWEEN FR 21 AND FR 24
Access panels :
NONE
Skills :
AF 1 34.80 MHrs
ISB 53-1180 T 10 000 CY
I 500 CY
2267 531197-01-1 NLG BAY 123 DI
124
Y D
DETAILED INSPECTION OF NOSE LANDING GEAR ACTUATOR
FITTING FASTENERS
Access panels :
824
Skills :
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2013-0122
ISB 53-1259
T 60 000 FH
T 30 000 CY
I 10 000 FH
I 5 000 CY
ALL 531259-01-1 TI-ANGLE CONNECTION BETWEEN BELLY 140 DI N
DETAILED INSPECTION OF OF TI-ANGLE CONNECTION
BETWEEN BELLY FAIRING AND KEEL BEAM SIDE PANEL
FR41-FR42, RH/LH.
AMM 532100/6
AMT 532100-210-001
MRB 532102-01-2
T 12 YE
I 12 YE
ALL 532102-01-2 FLOOR STRUCTURE FR 24-35.8 231 GVI
232
Y
EXCLUDING AREAS BELOW GALLEYS AND TOILETS (IF
INSTALLED) AND EMERGENCY EXIT ENTRANCE AREA, BETWEEN
FR 24 AND FR 35.8
NOTE: CPCP
Skills :
AF 1 2.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-220-001
MRB 532105-01-2
T 6 YE
I 6 YE
ALL 532105-01-2 FLOOR STRUCTURE FR 24 TO FR 35.8 231 DI
232
Y
AND 0.5M AROUND GALLEYS AND TOILETS (IF INSTALLED)
AND EMERGENCY EXIT ENTRANCE AREA, BETWEEN FR 24 AND
FR 35.8
GALLEYS
NOTE: CPCP
Access panels :
NONE
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-018
MRB 532113-01-1
T 6 YE
I 6 YE
ALL 532113-01-1 FWD EMERGENCY EXIT CUTOUT SURROUNDS 231 DI
232
Y
DETAILED INSPECTION OF INTERNAL STRUCTURE AROUND
FORWARD EMERGENCY EXIT CUTOUTS, BETWEEN FR 35 AND FR
35.3 FROM STRINGER 23 LH TO STRINGER 7 LH AND FROM
STRINGER 23 RH TO STRINGER 10 RH
PREP: CEILING PANELS REMOVED
LINING REMOVED
OVERHEAD STOWAGE COMPARTMENTS ON RH SIDE (IF
REMOVED (IF INSTALLED)
INSULATION REMOVED
NOTE: CPCP
Access panels :
NONE 833 843
Skills :
AF 1 0.40 MHrs
AMM 532100/6
AMT 532100-200-019
MRB 532114-01-1
T 12 YE
I 12 YE
ALL 532114-01-1 DOOR STOP FITTINGS 231 DI
232
Y
DETAILED INSPECTION OF DOOR STOP FITTINGS ON FR 35.1
AND FR 35.2A, LH/RH
PREP.: LINING REMOVED
NOTE : CPCP
Access panels :
NONE 833 843
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-220-006
MRB 532115-01-1
T 30 000 CY
I 20 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532115-01-1 FR35.1 &.2A WEB/DOOR STOP INTERCOSTALS 231 DI
232
Y R
DETAILED INSPECTION OF FR 35.1 AND FR 35.2A WEB AND
DOOR STOP INTERCOSTALS, AT JUNCTION AREA, BETWEEN
DOOR STOP NO1 AND NO8 (LH)/NO6 (RH), LH/RH
INSULATION REMOVED
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
NONE 833 843
Skills :
AF 1 0.40 MHrs
AMM 532100/6
AMT 532100-220-006
MRB 532115-01-2
T 30 000 CY
I 19 100 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
532115-01-2 FR35.1 &.2A WEB/DOOR STOP INTERCOSTALS 231 DI
232
Y
DETAILED INSPECTION OF FR 35.1 AND FR 35.2A WEB AND
DOOR STOP INTERCOSTALS, AT JUNCTION AREA, BETWEEN
DOOR STOP NO1 AND NO8 (LH)/NO6 (RH), LH/RH
INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
833 843
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-020
MRB 532117-01-1
T 6 YE
I 6 YE
ALL 532117-01-1 ESCAPE CHUTE SLIDE COMPARTMENT 131 DI
132
Y
DETAILED INSPECTION OF ESCAPE CHUTE SLIDE
COMPARTMENT, INTERNAL STRUCTURE, BETWEEN FR 35.1 AND
FR 35.2A, FROM STRINGER 24 TO STRINGER 28, LH/RH
PREP: ESCAPE CHUTE SLIDE ASSEMBLY REMOVED
NOTE: CPCP
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-021
MRB 532119-01-1
T 60 000 FH
T 30 000 CY
T 12 YE
I 42 000 FH
I 19 500 CY
I 12 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532119-01-1 FWD EMER EXIT CUTOUT UNDER SCUFF-PLATE 100 DI Y R
DETAILED INSPECTION OF FORWARD EMERGENCY EXIT CUT OUT
UNDERNEATH THE SCUFF-PLATE, LH/RH
PREP. : SCUFF PLATE REMOVED
NOTE 3: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
833 843
Skills :
AF 1 0.20 MHrs
AMM 532100/6
AMT 532100-200-021
MRB 532119-01-2
T 60 000 FH
T 30 000 CY
T 12 YE
I 42 000 FH
I 18 600 CY
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
532119-01-2 FWD EMER EXIT CUTOUT UNDER SCUFF-PLATE 100 DI Y
DETAILED INSPECTION OF FORWARD EMERGENCY EXIT CUT OUT
UNDERNEATH THE SCUFF-PLATE, LH/RH
PREP. : SCUFF PLATE REMOVED
NOTE 3: CPCP
Access panels :
833 843
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-001
MRB 532120-01-1
T 30 000 CY
I 9 500 CY
ALL 532120-01-1 FRAME WEBS 231 DI
232
Y
DETAILED INSPECTION OF FRAME WEBS AT STRINGER 18
LH/RH FOR FR 25, 26, 27, 28, 32, 33, 34
PREP.: LINING
INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
NONE 831
Skills :
AF 1 0.60 MHrs
AMM 532100/6
AMT 532100-200-002
MRB 532125-01-1
T 60 000 FH
T 30 000 CY
I 20 800 FH
I 10 400 CY
ALL 532125-01-1 JUNCTION FR 24/PAX FLOOR BEAM 128 DI
132
Y
DETAILED INSPECTION OF FR 24 JUNCTION WITH CABIN
FLOOR BEAM AT STRINGER 23, INTERNAL SIDE, RH
PREP.: INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
NONE 131HC 132BW 132EW 825
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-027
MRB 532132-01-3
T 12 YE
I 12 YE
ALL 532132-01-3 FWD CARGO DOOR HINGE FITTING 100 DI
132
Y
DETAILED INSPECTION OF FUSELAGE FORWARD CARGO DOOR
HINGE FITTING AND EXTERNAL ATTACHMENT AREA
NOTE 1: TPS APPLICATION IS LIMITED TO THE INNER SIDE
OF THE HINGE FITTINGS
PREP. : DOOR OPENED AND CLOSED
NOTE 2: CPCP
Access panels :
825
Skills :
AF 1 0.90 MHrs
AMM 532100/6
AMT 532100-200-016
MRB 532140-01-1
T 60 000 FH
T 30 000 CY
I 14 200 FH
I 7 100 CY
ALL 532140-01-1 FR 25, 26 AND 27 LOWER FITTINGS 132 DI
232
Y
DETAILED INSPECTION OF INSIDE RADIUS OF CROSS BEAM AT
FR 25, FR 26 AND FR 27 LOWER FITTINGS, LOCATED ABOVE
FORWARD CARGO DOOR, RH
PREP. : ACTUATOR DISCONNECTED
CEILING PANELS REMOVED
Access panels :
825
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-017
MRB 532140-02-1
NTM 53-21-40
T 60 000 FH
T 30 000 CY
I 34 800 FH
I 17 400 CY
ALL 532140-02-1 FR 25, 26 AND 27 LOWER FITTINGS 132 SDI
232
Y
SPECIAL DETAILED INSPECTION (HFEC) OF INSIDE RADIUS
OF CROSS BEAM AT FR 25, FR 26 AND FR 27 LOWER
FITTINGS, LOCATED ABOVE FORWARD CARGO DOOR, RH.
PREP. : ACTUATOR DISCONNECTED
CEILING PANELS REMOVED
Access panels :
825
Skills :
AF 1 0.40 MHrs
AMM 532100/6
AMT 532100-200-009
MRB 532145-01-2
T 30 000 CY
I 11 100 CY
ALL 532145-01-2 FR 29 TO 34 ATTACHMENT AREA 131 DI
132
Y
DETAILED INSPECTION OF ATTACHMENT AREA OF FR 29 TO FR
34, CARGO FLOOR BEAMS, LH/RH
PREP:CARGO FLOOR PANELS REMOVED;
NOTE : SAMPLING 20%
Access panels :
825
Skills :
AF 1 3.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-220-007
MRB 532147-01-1
T 30 000 CY
I 15 400 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532147-01-1 FR35.1 & FR35.2A TO CABIN FLOOR BEAMS 131 DI
132
Y R
DETAILED INSPECTION OF ATTACHMENT AREA OF FR 35.1 AND
FR 35.2A TO CABIN FLOOR BEAMS, LH/RH
INSULATION REMOVED
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
825
Skills :
AF 1 1.00 MHrs
AMM 532100/6
AMT 532100-220-007
MRB 532147-01-2
T 30 000 CY
I 14 700 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
532147-01-2 FR35.1 & FR35.2A TO CABIN FLOOR BEAMS 131 DI
132
Y
DETAILED INSPECTION OF ATTACHMENT AREA OF FR 35.1 AND
FR 35.2A TO CABIN FLOOR BEAMS, LH/RH
INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
825
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-220-005
MRB 532153-01-1
T 60 000 FH
T 30 000 CY
I 22 500 FH
I 8 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532153-01-1 FUSELAGE SKIN/WINDOW FORCING DOUBLERS 200 DI Y R
DETAILED INSPECTION OF FUSELAGE SKIN AND VISIBLE PART
OF WINDOW FORGING DOUBLERS AROUND CABIN WINDOWS,
BETWEEN FR 35.3 AND FR 35.8 AND BETWEEN STRINGER 14
AND STRINGER 18, EXTERNAL SURFACE, LH/RH
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.20 MHrs
AMM 532100/6
AMT 532100-220-005
MRB 532153-01-2
T 60 000 FH
T 30 000 CY
I 22 700 FH
I 8 600 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
532153-01-2 FUSELAGE SKIN/WINDOW FORCING DOUBLERS 200 DI Y
BETWEEN FR 35.3 AND FR 35.8 AND BETWEEN STRINGER 14
AND STRINGER 18, EXTERNAL SURFACE, LH/RH
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-220-002
MRB 532158-01-1
T 60 000 FH
T 30 000 CY
I 19 900 FH
I 7 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532158-01-1 FUSELAGE SKIN BETWEEN FR 35 & FR 35.8 200 DI Y R
DETAILED INSPECTION OF FUSELAGE EXTERNAL SURFACE,
BETWEEN FR 35 AND FR 35.8 FROM STRINGER 8 TO CROWN
CENTERLINE, LH/RH.
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.20 MHrs
AMM 532100/6
AMT 532100-220-002
MRB 532158-01-2
T 60 000 FH
T 30 000 CY
I 24 000 FH
I 9 000 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
532158-01-2 FUSELAGE SKIN BETWEEN FR 35 & FR 35.8 200 DI Y
DETAILED INSPECTION OF FUSELAGE EXTERNAL SURFACE,
BETWEEN FR 35 AND FR 35.8 FROM STRINGER 8 TO CROWN
CENTERLINE, LH/RH.
NOTE : SAMPLING 20%
AMM 532100/6
AMT 532100-200-008
MRB 532160-01-1
T 48 000 CY
I 13 000 CY
ALL 532160-01-1 FUSELAGE SKIN BETWEEN FR 28 AND 35 200 DI Y
BETWEEN FR 28 AND FR 35 AND BETWEEN STRINGER 14 AND
STRINGER 18, EXTERNAL SURFACE, LH/RH
Skills :
AF 1 1.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 532100-210-802
MRB 532164-01-6
T 60 000 FH
T 30 000 CY
I 5 800 FH
I 2 900 CY
ALL 532164-01-6 FORWARD FUSELAGE 200 GVI N
SURFACE, FROM STRINGER 23 LH/RH TO CROWN CENTERLINE,
EXCEPT AREAS COVERED BY BELLY FAIRING
NOTE: INSPECTION BETWEEN FR 24 AND FR 35.8.
Skills :
AF 1 3.52 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-220-003
MRB 532168-01-1
T 30 000 CY
I 9 600 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
532168-01-1 FUSELAGE SKIN COVERED BY BELLY FAIRING 191 DI
192
Y R
DETAILED INSPECTION OF FUSELAGE SURFACE COVERED BY
BELLY FAIRING, BETWEEN FR 35.5 AND FR 35.7 FROM
STRINGER 26 TO STRINGER 32, LH/RH
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
191AT 192AT
Skills :
AF 1 0.40 MHrs
AMM 532100/6
AMT 532100-220-003
MRB 532168-01-2
T 30 000 CY
I 9 100 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
532168-01-2 FUSELAGE SKIN COVERED BY BELLY FAIRING 191 DI
192
Y
DETAILED INSPECTION OF FUSELAGE SURFACE COVERED BY
BELLY FAIRING, BETWEEN FR 35.5 AND FR 35.7 FROM
NOTE : SAMPLING 20%
Access panels :
191AT 192AT
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-011
MRB 532175-01-1
T 12 YE
I 6 YE
ALL 532175-01-1 FWD CARGO DOOR CUT OUT 132 DI
232
Y
DETAILED INSPECTION OF INTERNAL STRUCTURE AROUND
FORWARD CARGO DOOR CUTOUT, FROM FR 24 TO FR 29 AND
BETWEEN STRINGER 23 AND STRINGER 38, RH
PREP. : CARGO FLOOR PANELS REMOVED * TBD
FWD ACT(S) REMOVED (IF INSTALLED)
LINING AND INSULATION REMOVED
NOTE: CPCP
Access panels :
825
Skills :
AF 1 4.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-013
MRB 532180-01-4
T 6 YE
I 6 YE
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
532180-01-4 FUSELAGE FR 24-35.8 133 DI
134
137
138
Y R
BETWEEN INCLUDING FORWARD FACE OF PRESSURE BULKHEAD, FROM STRINGER 38 LH/RH
TO BOTTOM CENTERLINE
NOTE 1: INSPECTION BETWEEN FR 24 AND FR 35.8. TYPE 2 TPS MAY BE LIMITED TO
FUSELAGE INTERNAL STRUCTURE FROM FR 35.7 TO FR 35.8, AND FORWARD FACE OF
PRESSURE BULKHEAD, FROM STRINGER 38, LH/RH TO BOTTOM CENTERLINE
NOTE 2: CPCP
PREP. : CARGO FLOOR PANELS
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
825
Skills :
AF 1 2.40 MHrs
AMM 532100/6
AMT 532100-210-008
MRB 532195-01-1
T 16 700 CY
I 16 700 CY
ALL 532195-01-1 FWD CARGO DOOR ACTUATOR 132 GVI Y
GENERAL VISUAL INSPECTION OF FORWARD CARGO DOOR
ACTUATOR ATTACH BRACKETS, BETWEEN CABIN FLOOR BEAMS,
FROM FR 25 TO FR 27
Access panels :
131AC 825
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 532100/6
AMT 532100-200-005
MRB 532196-01-1
T 37 400 CY
T 12 YE
I 9 300 CY
I 12 YE
ALL 532196-01-1 FWD CARGO DOOR ECCENTRIC BOLTS 132 DI Y
DETAILED INSPECTION OF FORWARD CARGO DOOR ECCENTRIC
BOLTS OF LOCKING MECHANISM AT LOCK FITTINGS, BETWEEN
FR 25 AND FR 27A
PREP. : ECCENTRIC BOLTS REMOVED
NOTE 3: CPCP
Access panels :
825
Skills :
AF 1 1.10 MHrs
AMT 533100-210-002
MRB 533101-01-3
T 60 000 FH
T 30 000 CY
I 37 600 FH
I 18 800 CY
ALL 533101-01-3 AFT PRESSURE BULKHEAD FWD FACE 147 DI
148
N
DETAILED INSPECTION OF PRESSURE BULKHEAD AT FR 46,
FORWARD FACE.
NOTE 2: SAMPING 20%
Access panels :
734 744
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 533100-210-008
MRB 533103-01-5
T 60 000 FH
T 35 000 CY
T 12 YE
I 40 500 FH
I 18 000 CY
I 12 YE
ALL 533103-01-5 AFT PRESSURE BULKHEAD AFT FACE 151 DI
152
N
DETAILED INSPECTION OF PRESSURE BULKHEAD AT FR 46,
AFT FACE, INCLUDING VERTICAL BEAMS, ABOVE CARGO FLOOR
LEVEL.
PREPARATION:
INSULATION REMOVED;
NOTE 1: 100% THRESHOLD = 12 YEARS
NOTE 3: CPCP
Access panels :
151AW 151BW 152BW
Skills :
AF 1 2.00 MHrs
AMM 533100/6
AMT 533100-210-004
MRB 533107-01-1
T 48 000 CY
I 20 000 CY
ALL 533107-01-1 MLG BAY SIDE PANELS OUTBOARD FACE 147 DI
148
Y
DETAILED INSPECTION OF MLG BAY FUSELAGE SIDE PANELS,
OUTBOARD FACE, BETWEEN FR 42 AND FR 47, FROM STRINGER
26 TO STRINGER 36, LH/RH
NOTE : SAMPLING 20%
Access panels :
191ET 192ET 193AT 194AT 734 744
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 533100-220-003
MRB 533110-01-2
NTM 53-31-00
T 60 000 FH
T 33 500 CY
I 33 000 FH
I 12 000 CY
ALL 533110-01-2 LONGITUDINAL FLOOR BEAMS 145 SDI
146
N
SPECIAL DETAILED INSPECTION (EDDY CURRENT) OF UPPER
FLANGE OF LONGITUDINAL FLOOR BEAMS AT FR 42 AND FR
46, AS FAR AS VISIBLE
PREPARATION: CABIN FLOOR PANELS REMOVED;
Skills :
AVI 1 0.00 MHrs
AMM 533100/6
AMT 533100-210-018
MRB 533121-01-2
T 30 000 CY
I 20 000 CY
ALL 533121-01-2 CIRCUMFERENTIAL SPLICE AT FR 35 & 35.8 200 DI Y
AND STRINGER COUPLING AREA AT FR 35 AND FR35.8 FROM
STRINGER 10, LH/RH TO CROWN CENTERLINE, EXTERNAL
SURFACE
NOTE : SAMPLING 20%
Skills :
AF 1 0.50 MHrs
AMT 533100-210-038
MRB 533133-01-6
T 30 000 CY
I 5 000 CY
ALL 533133-01-6 CENTER FUSELAGE 200 GVI N
SURFACE, BETWEEN STRINGER 23, LH/RH TO CROWN CENTER
LINE, EXCEPT AREAS COVERED BY BELLY FAIRING
NOTE: INSPECT FROM FR 35.8 TO FR 47.
Skills :
AF 1 8.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 533100/6
AMT 533100-210-031
MRB 533135-01-1
T 12 YE
I 12 YE
ALL 533135-01-1 FUSELAGE FR 36-46 145 GVI
146
Y
STRUCTURE BELOW CABIN FLOOR PANELS, INCLUDING CABIN
FLOOR STRUCTURE BETWEEN FR 36 AND FR 46
NOTE 1: CAN BE PERFORMED AT SAME TIME AS TASK
571157-01-1
PREP. : CABIN FLOOR PANELS
INSULATION REMOVED
NOTE 2: CPCP
Skills :
AF 1 3.30 MHrs
AMM 533100/6
AMT 533100-210-023
MRB 533136-01-1
T 6 YE
I 6 YE
ALL 533136-01-1 MAIN LANDING GEAR BAY 147 GVI
148
Y
GENERAL VISUAL INSPECTION OF MLG BAY, INCLUDING MLG
DOOR HINGES
NOTE: CPCP
Access panels :
743 744
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 533100/6
AMT 533100-210-007
MRB 533151-01-2
T 48 000 CY
T 6 YE
I 10 000 CY
I 6 YE
ALL 533151-01-2 KEELBEAM BOX NT DI Y
DETAILED INSPECTION OF KEELBEAM BOX
NOTE 1: INSPECTION BETWEEN FR 35.8 AND FR 47.
NOTE 2: CPCP
NOTE 3: WORKING ZONES: 147, 148, 191, 192, 195, 196
Access panels :
147AB 147BB 147EB 147FB 148DB 148FB 191BB
191GB 191HB 191JB 191KB 192KB 195AB 196AB
734 744
Skills :
AF 1 1.20 MHrs
AMM 533100/6
AMT 533100-210-032
MRB 533153-02-2
T 6 YE
I 6 YE
ALL 533153-02-2 PRESSURE BULKHEAD AT FR 35.8 AFT FACE 191 GVI
192
Y
GENERAL VISUAL INSPECTION OF PRESSURE BULKHEAD AFT
FACE AND LOWER SKIN OF RESSURE DECK LOWER SURFACE
NOTE 1: INSPECTION AT FR 35.8 AND LOWER SKIN OF
PRESSURE DECK LOWER SURFACE, BETWEEN FR 35.8 AND FR
36.
NOTE 2: CPCP
Access panels :
191BB 191EB 192EB 192FB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 533100/6
AMT 533100-210-014
MRB 533154-01-1
T 6 YE
I 6 YE
ALL 533154-01-1 MLG DOORS FITTINGS 147 DI
148
Y
DETAILED INSPECTION OF HINGE AND ACTUATOR FITTINGS
FOR MLG DOORS AT KEELBEAM
NOTE: CPCP
Access panels :
734 744
Skills :
AF 1 0.70 MHrs
AMT 533100-220-001
EAD 2012-0118
FAD 2009-20-05
ISB 53-1195
NT Check : ALL 533154-03-1 MLG DOORS FITTINGS 147 SDI
148
N
SPECIAL DETAILED INSPECTION (US AND HFEC) OF
ACTUATOR FITTINGS FOR MLG DOORS AT KEEL BEAM LH/RH
(FOR TWIN WHEEL A/C OR FOR BOGIE A/C)
PREPARATION: ACTUATOR REMOVED
NOTE 1: FOR THRESHOLD AND INTERVAL, REFER TO AD 2012-0118.
Skills :
AVI 1 6.00 MHrs
AMT 533100-220-001
EAD 2012-0118
FAD 2009-20-05
ISB 53-1196
NT Check : ALL 533154-04-1 MLG DOORS FITTINGS 147 SDI
148
N
SPECIAL DETAILED INSPECTION (HFEC) OF THE KEEL BEAM MLG DOOR FWD HINGE
FITTING (FOR TWIN WHEEL A/C), OR OF THE KEEL BEAM MLG DOOR
CENTER-HINGE-FITTING (FOR BOGIE A/C), LH/RH
NOTE: -FOR THRESHOLD AND INTERVAL, REFER TO AD 2012-0118.
Skills :
AVI 1 5.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-016
MRB 534103-01-2
T 44 300 CY
I 20 000 CY
ALL 534103-01-2 WINDOW FORGINGS FR 47-64 200 DI Y
DETAILED INSPECTION OF VISIBLE PART OF WINDOW
FORGINGS AND FUSELAGE SKIN IN WINDOW FORGING AREA,
BETWEEN FR 47 AND FR 64, LH/RH, EXTERNAL SURFACE
NOTE : SAMPLING 20%
Skills :
AF 1 1.60 MHrs
AMM 534100/6
AMT 534100-210-011
MRB 534106-01-2
T 48 000 CY
I 12 000 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
534106-01-2 FRAME SPLICES FR 53-56 252 DI Y
DETAILED INSPECTION OF FRAME SPLICES AND ADJACENT
AREA LOCATED ABOVE STRINGER 18 RH
NOTE 1: INSPECT AREA FROM FR 53 TO FR 56.
THIS TASK IS AN ALTERNATIVE INSPECTION TO TASK
534106-02-2.
Access panels :
252HW 252LW 252PW
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-220-004
MRB 534106-02-1
NTM 53-41-06
T 48 000 CY
I 20 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
534106-02-1 FRAME SPLICES FR 53-56 252 SDI Y R
SPECIAL DETAILED INSPECTION (US) OF FRAME SPLICES AND
ADJACENT AREA FROMLOCATED ABOVE STRINGER 18
NOTE: INSPECT AREA FROM FR 53 TO FR 56. THIS TASK IS AN ALTERNATIVE
INSPECTION TO TASK 534106-01-5
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
252HW 252LW 252PW
Skills :
NDT 1 0.80 MHrs
AMM 534100/6
AMT 534100-220-004
MRB 534106-02-2
NTM 53-41-06
T 48 000 CY
I 19 000 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
534106-02-2 FRAME SPLICES FR 53-56 252 SDI Y
SPECIAL DETAILED INSPECTION (US) OF FRAME SPLICES AND
ADJACENT AREA LOCATED ABOVE STRINGER 18
NOTE 1: INSPECT AREA FROM FR 53 TO FR 56.
THIS TASK IS AN ALTERNATIVE INSPECTION TO TASK
534106-01-2.
Access panels :
252HW 252LW 252PW
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
ALI 534107-01-1
AMM 534100/6
AMT 534100-210-014
MRB 534107-01-1
T 6 YE
I 6 YE
ALL 534107-01-1 FUSELAGE INTERNAL STRUCTURE FR 46-65 153 DI
154
Y
BETWEEN FR 46 AND FR 65, INCLUDING AFT FACE OF
PRESSURE BULKHEAD FROM STRINGER 38, LH/RH TO BOTTOM
CENTER LINE.
NOTE 2: CPCP
PREP.: CARGO FLOOR PANELS REMOVED; ACT(S) REMOVED (IF INSTALLED);
Access panels :
NONE
Skills :
AF 1 5.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-036
MRB 534109-01-1
T 48 000 CY
I 20 000 CY
ALL 534109-01-1 UPPER SEGMENT OF FR 70 263 DI
264
Y
DETAILED INSPECTION OF UPPER SEGMENT OF FR 70, FIN TO
FUSELAGE FORWARD ATTACHMENT FITTINGS AND AREA BETWEEN
FR 69 AND FR 70, FROM STRINGER 6, LH/RH TO CROWN
CENTER LINE, INTERNAL STRUCTURE
PREP.: GALLEYS
INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
NONE
Skills :
AF 1 3.00 MHrs
ALI 534110-01-1
AMM 534100/6
AMT 534100-210-018
MRB 534110-01-1
T 48 000 CY
I 20 000 CY
ALL 534110-01-1 CIRCUMFERENTIAL SKIN SPLICE AT FR 70 200 DI
323
Y
AT FR 70, BETWEEN STRINGER 10, LH/RH AND CROWN CENTER
LINE, INCLUDING CUTOUT CORNERS FOR FIN ATTACHMENTS,
EXTERNAL SURFACE
NOTE : SAMPLING 20%
Access panels :
323AL 323AR
Skills :
AF 1 5.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-210-823 T 30 000 CY
I 3 000 CY
ALL 534118-01-4 REAR FUSELAGE 200 GVI N
SURFACE, BETWEEN STRINGER 23, LH/RH TO CROWN CENTER
LINE
NOTE 1: INSPECTION FROM FR 47 TO FR 70.
NOTE 2: THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS ISS 14
AMD 00 EFFECTIVE DATE IS NEXT 2A CHECK
AMT 534100-220-802
NTM 53-41-23
T 60 000 FH
T 34 200 CY
I 19 600 FH
I 9 800 CY
262
263
264
N
SPECIAL DETAILED INSPECTION (ROTO) OF FUSELAGE
INTERNAL STRUCTURE, FRAME 66 AND FRAME 68 INNER CAP
JOINT TO GUSSETS PLATE FROM STRINGER 10 TO STRINGER
16, LH/RH
PREP.: BOLTS REMOVED; INSULATION REMOVED; LINING REMOVED;
NOTE: SAMPLING 20%
Access panels :
832 842
Skills :
NDT 1 1.32 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-806
MRB 534128-01-3
T 60 000 FH
T 48 000 CY
I 58 200 FH
I 29 100 CY
2255
2261
2267
2303
2974
534128-01-3 FUSELAGE SKIN BETWEEN FR 64 AND 70 200 DI Y
DETAILED INSPECTION OF FUSELAGE SKIN EXTERNAL SURFACE
BETWEEN FRAME 64 AND FRAME 70 FROM STRINGER 6 TO
CROWN CENTER LINE, LH/RH
Access panels :
321AL
Skills :
AF 1 0.20 MHrs
AMT 534100-210-021
MRB 534133-01-6
T 60 000 FH
T 48 000 CY
I 47 600 FH
I 23 800 CY
ALL 534133-01-6 AFT PAX/CREW DOOR CUTOUT LWR CORNER 832 DI
842
N
CUTOUT, LOWER CORNERS, INCLUDING SKIN AND DOUBLER
UNDERNEATH THE SCUFF PLATE, LH/RH
PREPARATION: CORNER SCUFF PLATES REMOVED;
NOTE: SAMPLING 20%
Access panels :
832
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-220-008
NTM 53-41-33
T 60 000 FH
T 48 000 CY
I 60 000 FH
I 38 600 CY
260
N
SPECIAL DETAILED INSPECTION (HFEC & X-RAY) OF AFT
PASSENGER/CREW DOOR CUTOUT, LOWER CORNERS, INCLUDING
SKIN AND DOUBLER UNDERNEATH THE SCUFF PLATE, LH/RH
NOTE: SPECIAL DETAILED INSPECTION IS FOR DOUBLER
WHICH IS NOT VISIBLE WITH DETAILED INSPECTION.
PREP.: LINING AND INSULATION REMOVED;
CORNER SCUFF PLATES REMOVED;
Access panels :
832 842
AMM 534100/6
AMT 534100-210-029
MRB 534134-01-1
T 12 YE
I 12 YE
ALL 534134-01-1 DOOR STOP FITTINGS FR 66 AND 68 261 DI
262
Y
DETAILED INSPECTION OF DOOR STOP FITTINGS ON FR 66
AND FR 68, LH/RH
NOTE : CPCP
Access panels :
NONE 832 842
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-003
MRB 534135-01-4
T 6 YE
I 6 YE
ALL 534135-01-4 AFT PAX/CREW DOOR CUTOUT 261 DI
262
263
264
Y
DETAILED INSPECTION OF INTERNAL STRUCTURE AROUND AFT
PASSENGER/CREW DOOR CUTOUT, ABOVE CABIN FLOOR LEVEL,
BETWEEN FR 65 AND FR 69 AND FROM STRINGER 6 TO
STRINGER 23, LH/RH, EXCLUDING THE LOWER CORNERS OF
THE DOOR ENTRANCE AREA AT FR 66 AND FR 68, BETWEEN
STRINGER 22 AND 23, LH/RH
NOTE 1: EXCLUDED AREA COVERED BY TASKS 534143-01-1 OR
534143-01-3.
NOTE 2: CPCP
PREP: LINING AND INSULATION REMOVED
Access panels :
NONE 832 842
Skills :
AF 1 0.80 MHrs
AMM 534100/6
AMT 534100-210-041
MRB 534136-01-1
T 12 YE
I 12 YE
ALL 534136-01-1 AFT PAX/CREW DOOR UNDER SCUFF-PLATE 100 DI Y
CUTOUT, UNDERNEATH THE SCUFF PLATE, LH/RH
PREP.: SCUFF PLATE
NOTE : CPCP
Access panels :
832 842
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-220-009
NTM 53-41-37
T 60 000 FH
T 30 300 CY
I 50 200 FH
I 25 100 CY
SPECIAL DETAILED INSPECTION (LFEC) OF INTERNAL
DOUBLER, FORWARD AND AFT OF WASTE SERVICE PANEL
CUTOUT, BETWEEN STRINGER 35 AND STRINGER 39, RH
NOTE: SAMPLING 20%
Skills :
NDT 1 1.00 MHrs
AMT 534100-220-007
NTM 53-41-39
T 60 000 FH
T 48 000 CY
I 45 600 FH
I 22 800 CY
SPECIAL DETAILED INSPECTION (LFEC) OF INTERNAL
DOUBLER, FORWARD AND AFT OF WATER SERVICE PANEL
CUTOUT, BETWEEN STRINGER 38 AND STRINGER 42, LH.
NOTE 1 : CREDIT CAN BE TAKEN FROM PREVIOUS ACCOMPLISHMEN
OF TASK 534139-01-1
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-834
MRB 534143-01-1
T 5 YE
I 5 YE
2255
2261
2267
2303
2480
534143-01-1 FUSELAGE INTERNAL STRUCTURE FR 66-68 261 DI
262
Y
DETAILED INSPECTION OF AFT PASSENGER/CREW DOOR CUTOUT
LOWER CORNERS INTERNAL STRUCTURE, ABOVE CABIN FLOOR
STRINGER 23 AND AROUND GIRT BAR FITTINGS, LH/RH
NOTE 1:CREDIT CAN BE TAKEN FORM PREVIOUS ACCOMPLISHMENT
OF TASK 534135-01-4 IN CASE THIS INSPECTION WAS
PERFORMED PRIOR JUNE 2004.
PREP.:BLANKING PLATE REMOVED; GIRT BAR FITTING REMOVED
LINING AND INSULATION REMOVED
NOTE 2: CPCP
Access panels :
832 842
Skills :
AF 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-210-834
MRB 534143-01-3
T 6 YE
I 6 YE
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
534143-01-3 FUSELAGE INTERNAL STRUCTURE FR 66-68 261 DI
262
Y R
DETAILED INSPECTION OF AFT PASSENGER/CREW DOOR CUTOUT
LOWER CORNERS INTERNAL STRUCTURE, ABOVE CABIN FLOOR
STRINGER 23 AND AROUND GIRT BAR FITTINGS, LH/RH
NOTE: CREDIT CAN BE GTAKEN FROM PREVIOUS ACCOMPLISHMENT OF TASKS
534135-01-4 OR 534143- 01-1.
PREP: BLANKING PLATE REMOVED; GIRT BAR FITTING REMOVED
LINING AND INSULATION REMOVED;
NOTE: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
Access panels :
832 842
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-030
MRB 534144-01-1
T 6 YE
I 6 YE
ALL 534144-01-1 FUSELAGE INTERNAL STRUCTURE FR 65-70 171 DI
172
Y
BELOW CABIN FLOOR PANELS INCLUDING FLOOR STRUCTURE,
FROM FR 65 TO FR 70
NOTE: CPCP
Access panels :
161DW 162DW 826
Skills :
AF 1 0.70 MHrs
AMM 534100/6
AMT 534100-210-801
MRB 534146-01-1
T 12 YE
I 12 YE
ALL 534146-01-1 FLOOR STRUCTURE FR 47-70 251 GVI
252
261
262
Y
EXCLUDING AREAS BELOW GALLEYS AND TOILETS AND DOOR
ENTRANCE AREA, FROM FR 47 TO FR 70
NOTE: CPCP
Access panels :
NONE
Skills :
AF 1 1.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-037
MRB 534147-01-1
T 6 YE
I 6 YE
ALL 534147-01-1 FLOOR STRUCTURE FR 47 TO 70 251 DI
252
261
262
Y
AND 0.5M AROUND GALLEYS AND TOILETS, FROM FR 47 TO
FR 70, EXCEPT AREA BETWEEN FR 66 AND FR 68 AND
LATERAL SHEAR PLATES BETWEEN FR 68 AND FR 70.
NOTE: TASK ONLY APPLICABLE IF GALLEYS/TOILETS
INSTALLED
GALLEYS
NOTE: CPCP
Access panels :
NONE
Skills :
AF 1 0.80 MHrs
AMM 534100/6
AMT 534100-210-802
MRB 534148-01-2
T 6 YE
I 6 YE
ALL 534148-01-2 FUSELAGE UNDER BELLY FAIRING 190 GVI Y
SURFACE, AND BELLY FAIRING SUPPORT STRUCTURE BETWEEN
FR 35.3 AND FR 48, UNDER THE BELLY FAIRING
PREP. : BELLY FAIRING
NOTE : CPCP
Skills :
AF 1 4.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-004
MRB 534150-01-1
T 12 YE
I 6 YE
ALL 534150-01-1 AFT CARGO DOOR CUTOUT 152 DI Y
AROUND AFT CARGO DOOR CUTOUT
NOTE: INSPECTION FROM FR 52 TO FR 57 AND BETWEEN STRINGER 23 AND STRINGER
38
PREP: ACT
INSULATION REMOVED
Access panels :
152DW 152EF 152FF 152HW 152MF 152NF
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-005
MRB 534152-01-3
T 12 YE
I 12 YE
ALL 534152-01-3 AFT CARGO DOOR HINGE FITTINGS INTERNAL 252 DI Y
DETAILED INSPECTION OF FUSELAGE INTERNAL STRUCTURE AT
INTERNAL ATTACHMENT AREA OF AFT CARGO DOOR HINGE
FITTINGS, FROM FR 52 TO FR 57, BETWEEN STRINGER 22
AND STRINGER 23
PREP. : REAR ACT REMOVED (IF INSTALLED)
INSULATION REMOVED
NOTE 1: 100 % THRESOLD = 24 YE
NOTE 3: CPCP
Access panels :
252GW 252KW 252NW
Skills :
AF 1 0.90 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-006
MRB 534153-01-3
T 12 YE
I 12 YE
ALL 534153-01-3 AFT CARGO DOOR HINGE FITTINGS EXTERNAL 152 DI Y
DETAILED INSPECTION OF FUSELAGE AFT CARGO DOOR HINGE
FITTINGS AND EXTERNAL ATTACHMENT AREA
NOTE: APPLICATION OF TPS IS LIMITED TO THE INNER SIDE
OF HINGE FITTINGS
PREP. : ACT
NOTE 3: CPCP
Access panels :
826
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-025
MRB 534155-01-3
T 48 000 CY
T 12 YE
I 11 400 CY
I 12 YE
ALL 534155-01-3 AFT CARGO DOOR ECCENTRIC BOLTS 154 DI Y
DETAILED INSPECTION OF AFT CARGO DOOR ECCENTRIC BOLTS
OF LOCKING MECHANISM AT LOCK FITTINGS, BETWEEN FR 53
AND FR 55 A (6 PLACES)
PREP. : ECCENTRIC BOLTS REMOVED
NOTE 3: CPCP
Access panels :
826
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-012
MRB 534156-01-1
T 48 000 CY
I 8 400 CY
ALL 534156-01-1 AFT CARGO DOOR LOCK FITTING 154 DI Y
DETAILED INSPECTION OF AFT CARGO DOOR LOCK FITTINGS
AND SURROUNDING STRUCTURE, BETWEEN FR 53 AND FR 55 A,
FROM STRINGER 41 RH TO DOOR SILL, INTERNAL PORTION (6
PLACES)
PREP. : REAR ACT
CARGO FLOOR PANELS
534156-02-1
Access panels :
NONE 826
Skills :
AF 1 0.90 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-220-011
MRB 534156-02-1
NTM 53-41-56
T 48 000 CY
I 9 600 CY
ALL 534156-02-1 AFT CARGO DOOR LOCK FITTINGS 154 SDI Y
SPECIAL DETAILED INSPECTION (HFEC) OF AFT CARGO DOOR
LOCK FITTINGS AND SURROUNDING STRUCTURE, BETWEEN FR
53 AND FR 55 A, FROM STRINGER 41 RH TO DOOR SILL,
INTERNAL PORTION (6 PLACES)
534156-01-1
PREP. : REAR ACT
CARGO FLOOR PANELS
Access panels :
NONE 826
Skills :
AF 1 0.20 MHrs
AMM 534100/6
AMT 534100-210-803
MRB 534160-01-1
T 6 YE
I 6 YE
ALL 534160-01-3 AFT CARGO DOOR CUTOUT LATERAL FRAMES 152 GVI Y
GENERAL VISUAL INSPECTION OF AFT CARGO DOOR CUTOUT,
VISIBLE PART OF LATERAL FRAMES.
NOTE: INSPECTION OF FR 52A AND FR 56
Access panels :
826
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-819
MRB 534163-01-1
T 16 700 CY
I 16 700 CY
ALL 534163-01-1 AFT CARGO DOOR ACTUATOR ATTACH BRACKET 152 GVI Y
GENERAL VISUAL INSPECTION OF AFT CARGO DOOR ACTUATOR
ATTACH BRACKET NOTE: INSPECTION BETWEEN FLOOR BEAMS AT FR 53, FR 54
AND FR 55
PREP. : ACT
Access panels :
151CC
Skills :
AF 1 0.20 MHrs
AMM 534100/6
AMT 534100-210-028
MRB 534164-01-1
T 12 YE
I 6 YE
ALL 534164-01-1 BULK CARGO DOOR CUTOUT 162 DI Y
AROUND BULK CARGO DOOR CUTOUT, FROM FR 59 TO FR 63
AND BETWEEN STRINGER 23 AND STRINGER 38
NOTE: CPCP
Access panels :
162BW 162EW
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-805
MRB 534167-02-1
T 6 YE
I 6 YE
ALL 534167-02-1 BULK CARGO DOOR STOP FITTING 162 GVI Y
GENERAL VISUAL INSPECTION OF BULK CARGO DOOR STOP
FITTINGS INCLUDING VISIBLE PART OF LATERAL FR 60 AND
FR 62.
NOTE: TPS APPLICATION IS LIMITED TO THE VISIBLE PART
OF THE LATERAL BULK CARGO DOOR FRAMES.
PREP: INSULATION REMOVED;
NOTE: CPCP
Access panels :
827
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-007
MRB 534169-01-1
T 12 YE
I 12 YE
ALL 534169-01-1 FUSELAGE SKIN UNDER SCUFF PLATE 162 DI
164
Y
DETAILED INSPECTION OF FUSELAGE SKIN UNDERNEATH BULK
CARGO DOOR SCUFF PLATE
PREP. : SCUFF PLATES REMOVED
NOTE 1: 100% LIMIT = 24YE
NOTE 3: CPCP
Access panels :
827
Skills :
AF 1 0.20 MHrs
AMM 534100/6
AMT 534100-210-044
MRB 534176-01-1
T 40 000 CY
I 11 600 CY
ALL 534176-01-1 AFT EMERGENCY EXIT SKIN CUTOUTS 100 DI
200
Y
DETAILED INSPECTION OF AFT EMERGENCY EXIT SKIN
CUTOUTS, UPPER AND LOWER CORNERS, EXTERNAL SURFACE,
LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-045
MRB 534177-01-1
T 48 000 CY
I 20 000 CY
ALL 534177-01-1 AFT EMERGENCY EXIT ESCAPE CHUTE COMPT. 100 DI Y
DETAILED INSPECTION OF AFT EMERGENCY EXIT ESCAPE
CHUTE COMPARTMENT SKIN CUTOUTS, UPPER AND LOWER
CORNERS, EXTERNAL SURFACE, LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.20 MHrs
AMM 534100/6
AMT 534100-210-049
MRB 534187-01-1
T 6 YE
I 6 YE
ALL 534187-01-1 ESCAPE CHUTE SLIDE COMPARTMENT 151 DI
152
Y
DETAILED INSPECTION OF ESCAPE CHUTE SLIDE COMPARTMENT
INTERNAL STRUCTURE, BETWEEN FR 47.2A AND FR 47.4 FROM
PREP: ESCAPE SLIDE
NOTE: CPCP
Skills :
AF 1 0.40 MHrs
AMM 534100/6
AMT 534100-210-048
MRB 534190-01-1
T 12 YE
I 12 YE
ALL 534190-01-1 DOOR STOP FITTINGS ON FR 47.2A & 47.4 251 DI
252
Y
DETAILED INSPECTION OF DOOR STOP FITTINGS ON FR 47.2A
AND FR 47.4, LH/RH
NOTE : CPCP
Access panels :
834 844
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-046
MRB 534191-01-1
T 48 000 CY
I 9 500 CY
ALL 534191-01-1 FUSELAGE SKIN AT WINDOW CUTOUT 200 DI Y
DETAILED INSPECTION OF SKIN AT WINDOW CUTOUT BETWEEN
FR 47 AND FR 47.2, FROM STRINGER 14 TO STRINGER 18,
NOTE : SAMPLING 20%
Skills :
AF 1 0.20 MHrs
AMM 534100/6
AMT 534100-210-047
MRB 534192-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 6 YE
ALL 534192-01-1 INTL STRUCT AROUND EMERG EXIT CUTOUTS 251 DI
252
Y
DETAILED INSPECTION OF INTERNAL STRUCTURE AROUND AFT
EMERGENCY EXIT CUTOUTS, ABOVE CABIN FLOOR LEVEL,
BETWEEN FR 47.2 AND FR 47.5, AND FROM STRINGER 10 TO
STRINGER 23, LH/RH
INSULATION REMOVED
NOTE 3: CPCP
Access panels :
834 844
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 534100/6
AMT 534100-210-835
MRB 534195-01-1
T 5 YE
I 5 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
534195-01-1 CABIN FLOOR STRUCTURE AFT ENTRANCE AREA 261 DI
262
Y
DETAILED INSPECTION OF CABIN FLOOR STRUCTURE AND
STRUCTURE BELOW AFT ENTRANCE AREA; BETWEEN FRAME 66
AND FRAME 68 AND LATERAL SHEAR PLATES BETWEEN FRAME
68 AND FRAME 70.
NOTE: IN CASE SUFFICIENT ACCESS TO LATERAL SHEAR WEBS
IS NOT POSSIBLE DUE TO GALLEY CONFIGURATION,
THE GALLEY MUST BE REMOVED TO GET ACCESS TO THE
INSPECTION AREA.
PREP: CABIN ATTENDANT SEAT REMOVED;
LATERAL GALLEY LINING REMOVED
LOWER DOOR FRAME LINING REMOVED
NOTE : CPCP
Access panels :
832 842
Skills :
AF 1 5.16 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 534100-210-835
MRB 534195-01-2
T 6 YE
I 6 YE
3198
3315
3355
3600
3737
3862
3964
3966
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
534195-01-2 CABIN FLOOR STRUCTURE AFT ENTRANCE AREA 261 DI
262
Y R
CABIN FLOOR STRUCTURE AFT ENTRANCE AREA
DETAILED INSPECTION OF CABIN FLOOR STRUCTURE AND
STRUCTURE BELOW AFT ENTRANCE AREA; BETWEEN FRAME 66
AND FRAME 68 AND LATERAL SHEAR PLATES BETWEEN FRAME
68 AND FRAME 70.
NOTE: IN CASE SUFFICIENT ACCESS TO LATERAL SHEAR WEBS
IS NOT POSSIBLE DUE TO GALLEY CONFIGURATION,
THE GALLEY MUST BE REMOVED TO GET ACCESS TO THE
INSPECTION AREA.
PREP: CABIN ATTENDANT SEAT REMOVED;
LATERAL GALLEY LINING REMOVED;
LOWER DOOR FRAME LINING REMOVED;
NOTE :CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5916
5958
Access panels :
832 842
Skills :
AF 1 0.66 MHrs
AMM 535100/6
AMT 535100-210-001
MRB 535101-01-1
T 6 YE
I 6 YE
ALL 535101-01-1 REAR PRESSURE BULKHEAD AFT FACE 311 DI
312
Y
DETAILED INSPECTION OF REAR PRESSURE BULKHEAD
COMPLETE AFT FACE, AND FUSELAGE INTERNAL STRUCTURE,
BETWEEN FR 70 AND FR 71, FROM STRINGER 26, LH/RH TO
BOTTOM CENTER LINE
NOTE1 : TPS MAY BE LIMITED TO FUSELAGE INTERNAL
STRUCTURE FROM FR 70 TO FR 71, AND AFT FACE OF
PRESSURE BULKHEAD, FROM STRINGER 26, LH/RH TO BOTTOM
CENTERLINE
PREP. : PROTECTIVE SHIELD
NOTE 2: CPCP
Access panels :
312AR
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 535100/6
AMT 535100-210-014
MRB 535105-01-3
T 48 000 CY
I 13 800 CY
ALL 535105-01-3 REAR PRESSURE BULKHEAD SPLICE 311 DI
312
Y
DETAILED INSPECTION OF REAR PRESSURE BULKHEAD AFT
FACE, REINFORCEMENT SPLICE AT FORWARD FIN ATTACHMENT
AREA
NOTE : SAMPLING 20%
Access panels :
312AR
Skills :
AF 1 0.60 MHrs
AMM 535100/6
AMT 535100-210-003
MRB 535107-01-2
T 60 000 FH
T 30 000 CY
I 27 000 FH
I 9 000 CY
ALL 535107-01-3 CIRCUMFERENTIAL JOINT AT FR70 311 DI
312
Y
DETAILED INSPECTION OF RING FRAME AT CIRCUMFERENTIAL
JOINT OF REAR PRESSURE BULKHEAD SKIN AT FR 70, AFT
FACE
NOTE : SAMPLING 20%
Access panels :
312AR
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 535100-210-004 T 48 000 CY
I 17 300 CY
ALL 535113-01-5 FUSELAGE SKIN AT THS CUTOUT 311 DI
312
N
DETAILED INSPECTION OF FUSELAGE SKIN AT HORIZONTAL
STABILIZER CUTOUT AT FORWARD, UPPER AND LOWER
CORNERS, LH/RH
NOTE 1 : CREDIT CAN BE TAKEN FROM PREVIOUS
NOTE 2 : CPCP
NOTE 3 : 100% LIMIT THRESHOLD = 12YE, INTERVAL = 12YE
Access panels :
333AB 333AT 343AB 343AT
AMM 535100/6
AMT 535100-210-005
MRB 535115-01-1
T 12 YE
I 12 YE
ALL 535115-01-1 FRAME 74 SPLICES 311 DI
312
Y
DETAILED INSPECTION OF FR 74, SPLICES AT STRINGER 12
AND STRINGER 19, LH/RH, INTERNAL STRUCTURE
NOTE: CPCP
Access panels :
312AR
Skills :
AF 1 1.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 535100-210-007 T 48 000 CY
I 18 000 CY
ALL 535117-01-5 HORIZONTAL STABILIZER ATTACHMENT 311 DI
312
N
DETAILED INSPECTION OF HORIZONTAL STABILIZER
ATTACHMENT AND BACK UP STRUCTURE AT FR 77, FROM
NOTE 2 : CPCP
NOTE 3 : 100% LIMIT THRESHOLD = 12YE, INTERVAL = 12YE
Access panels :
312AR 314AR
AMM 535100/6
AMT 535100-210-002
MRB 535121-01-1
T 6 YE
I 6 YE
ALL 535121-01-1 REAR PRESSURE BULKHEAD BLW CABIN FLOOR 171 DI
172
Y
DETAILED INSPECTION OF REAR PRESSURE BULKHEAD,
FORWARD FACE, BELOW CABIN FLOOR LEVEL
NOTE: CPCP
Access panels :
162DW
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 535100/6
AMT 535100-210-008
MRB 535123-01-1
T 12 YE
I 12 YE
ALL 535123-01-1 REAR PRESSURE BULKHEAD ABV CABIN FLOOR 261 DI
262
Y
DETAILED INSPECTION OF REAR PRESSURE BULKHEAD,
FORWARD FACE, ABOVE CABIN FLOOR LEVEL
PREP: GALLEYS
INSULATION REMOVED
NOTE: CPCP
Skills :
AF 1 14.70 MHrs
AMM 535100/6
AMT 535100-210-018
MRB 535126-01-1
T 12 YE
I 12 YE
ALL 535126-01-1 FUSELAGE AND VERT STAB ATTACH FITTINGS 323 GVI Y
SURFACE AND VERTICAL STABILIZER ATTACHMENT FITTING,
UNDERNEATH VERTICAL STABILIZER/FUSELAGE FAIRINGS
PREP: FAIRINGS
NOTE: CPCP
ACCESS : FAIRINGS REMOVED
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 535100/6
AMT 535100-210-009
MRB 535151-01-1
T 12 YE
I 12 YE
ALL 535151-01-1 TAIL CONE ATTACH FITTINGS 311 DI
312
313
314
Y
DETAILED INSPECTION OF TAIL CONE ATTACHMENT FITTINGS
AT FR 77 AND FR 78
NOTE 3: CPCP
Access panels :
314AR
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 545100-200-001
NTM 54-51-01
T 60 000 FH
T 30 000 CY
I 24 600 FH
I 12 300 CY
ALL 545101-01-5 PYLON FWD MOUNT FITTING 415 SDI N
SPECIAL DETAILED INSPECTION (ROTO) OF PYLON FORWARD
MOUNT FITTING AND SPIGOT FITTING.
NOTE: SAMPLING 20%
Access panels :
437AL 438AR 451AL 452AR
AMM 545100/6
AMT 545100-200-002
NTM 54-51-02
T 60 000 FH
T 30 000 CY
I 45 400 FH
I 22 700 CY
ALL 545102-01-3 PYLON FWD MOUNT FITTING 415 SDI
425
Y
SSPECIAL DETAILED INSPECTION (US) OF PYLON FORWARD
MOUNT FITTING, END OF LOWER ARMS, AFT OF RIB 1,
FORWARD AND AFT ATTACHMENT BOLT HOLES.
NOTE: SAMPLING 20%
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-027
MRB 545104-01-1
T 12 YE
I 12 YE
ALL 545104-01-1 PYLON LOWER SPAR UPPER SURFACE 415 DI
425
Y
DETAILED INSPECTION OF PYLON, LOWER SPAR, UPPER
SURFACE, BETWEEN RIB 2 AND RIB 3, AND RIB 4 AND RIB 8
NOTE: THIS TASK MUST BE PERFORMED AT THE SAME TIME AS
TASK 545104-02-1
NOTE: CPCP
NOTE: SAMPLE 20%.
NOTE: 100% LIMIT = 24YE
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-028
MRB 545104-02-1
NTM 54-51-04
T 12 YE
I 12 YE
ALL 545104-02-1 PYLON LOWER SPAR UPPER SURFACE 415 SDI
425
Y
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF PYLON,
LOWER SPAR, UPPER SURFACE, BETWEEN RIB 1 AND RIB 2,
AND RIB 3 AND RIB 4, AND RIB 8 AND RIB 10.
NOTE 1: THIS TASK MUST BE PERFORMED AT THE SAME TIME AS
TASK 545104-01-1
NOTE 2: CPCP
NOTE 3: SAMLE 20%
NOTE 4: 100% LIMIT = 24YE
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-004
MRB 545106-01-1
T 12 YE
I 12 YE
ALL 545106-01-1 PYLON LWR SPAR 415 DI
425
Y
DETAILED INSPECTION OF PYLON, LOWER SPAR, BETWEEN RIB
1 AND RIB 10, LOWER SURFACE
NOTE: CPCP
NOTE: SAMLE 20%
NOTE: 100% LIMIT = 24YE
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR 473AL 473AR 473BL 473CL 483AL 483AR
483BL 483CL
Skills :
AF 1 3.20 MHrs
AMT 545100-200-005 T 60 000 FH
T 30 000 CY
T 12 YE
I 30 200 FH
I 15 100 CY
I 12 YE
ALL 545107-01-5 ENGINE AFT ATTACH BEAM 415 DI
425
N
DETAILED INSPECTION OF ENGINE AFT ATTACHMENT BEAM.
NOTE 2 : CPCP
NOTE 3 : 100% LIMIT = 24YE
Access panels :
437AL 438AR 451AL 452AR
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-006
MRB 545114-01-3
T 60 000 FH
T 30 000 CY
I 28 400 FH
I 14 200 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
545114-01-3 PYLON/WING ATTACH FITTINGS LUGS RIB 4 415 DI
425
Y
DETAILED INSPECTION OF PYLON TO WING ATTACH FITTING
LUGS AT RIB 4
NOTE : SAMPLING 20%
Access panels :
414FR 423FL 471AL 472AR 481AL 482AR
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-006
MRB 545114-01-6
T 60 000 FH
T 30 000 CY
I 28 400 FH
I 14 200 CY
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
425
Y R
LUGS AT RIB 4
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
471AL 471AR 471BL 471BR 481AL 481AR 481BL
481BR
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-008
MRB 545115-01-3
T 60 000 FH
T 30 000 CY
I 11 600 FH
I 5 800 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
545115-01-3 PYLON/WING RIB 4 415 DI
425
Y
DETAILED INSPECTION OF PYLON TO WING FORWARD
ATTACHMENT SHACKLES AT RIB 4
Access panels :
414FR 423FL 471AL 472AR 481AL 482AR 521BT
621BT
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-008
MRB 545115-01-6
T 60 000 FH
T 30 000 CY
I 11 600 FH
I 5 800 CY
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
545115-01-6 PYLON/WING RIB 4 415 DI
425
Y
DETAILED INSPECTION OF PYLON TO WING FORWARD
ATTACHMENT SHACKLES AT RIB 4
Access panels :
471AL 471AR 471BL 471BR 481AL 481AR 481BL
481BR 521BT 621BT
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-007
MRB 545115-02-3
NTM 54-51-15
T 60 000 FH
T 30 000 CY
I 22 000 FH
I 11 000 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
545115-02-3 PYLON/WING RIB 4 415 SDI
425
Y
SPECIAL DETAILED INSPECTION (US) OF PYLON TO WING
FORWARD ATTACHMENT SHACKLES AT RIB 4.
Access panels :
414FR 423FL 471AL 472AR 481AL 482AR 521BT
621BT
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-007
MRB 545115-02-6
NTM 54-51-15
T 60 000 FH
T 30 000 CY
I 22 000 FH
I 11 000 CY
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
545115-02-6 PYLON/WING RIB 4 415 SDI
425
Y R
SPECIAL DETAILED INSPECTION (US) OF PYLON TO WING
FORWARD ATTACHMENT SHACKLES AT RIB 4.
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
471AL 471AR 471BL 471BR 481AL 481AR 481BL
481BR 521BT 621BT
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-009
MRB 545116-01-1
T 12 YE
I 12 YE
ALL 545116-01-1 PYLON/WING ATTACH FITTING RIB4 415 DI
425
Y
DETAILED INSPECTION OF SHACKLES, SLEEVES AND BOLTS OF
PYLON TO WING ATTACHMENT FITTINGS AT RIB 4
SHACKLES
SLEEVES
ENGINE REMOVED
NOTE 3: CPCP
Skills :
AF 1 8.40 MHrs
AMM 545100/6
AMT 545100-200-010
MRB 545117-01-1
T 12 YE
I 12 YE
2255
2261
2267
2303
2480
545117-01-1 PYLON SPIGOT 415 DI
425
Y
DETAILED INSPECTION OF PYLON SPIGOT RECEPTACLE UPPER
SURFACE, INCLUDING FITTING BORE, AND UPPER SPAR
SURROUNDING SURFACE
PREP: BALL JOINT
NOTE: CPCP
Access panels :
415BL 415BR 425BL 425BR 471AL 471BL 472AR
472BR 481AL 481BL 482AR 482BR
Skills :
AF 1 3.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 545100-200-010
MRB 545117-01-2
T 12 YE
I 12 YE
2974
3005
3013
3022
3198
3315
3355
425
Y
SURROUNDING SURFACE
PREP: BALL JOINT
NOTE: CPCP
Access panels :
415BL 415BR 425BL 425BR 471AL 471BL 472AR
472BR 481AL 481BL 482AR 482BR
Skills :
AF 1 1.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 545100-200-010
MRB 545117-01-4
T 12 YE
I 12 YE
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
425
Y R
SURROUNDING SURFACE
PREP: BALL JOINT
NOTE: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
415BL 415BR 425BL 425BR 471BL 471BR 471CL
471CR 481BL 481BR 481CL 481CR
Skills :
AF 1 3.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-011
MRB 545120-01-1
T 60 000 FH
T 30 000 CY
I 22 000 FH
I 11 000 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
425
Y
LUGS AT RIB 10
NOTE : SAMPLING 20%
Access panels :
471CL 472BR 475BL 476BR 481BL 482CR 485BL
486BR
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-011
MRB 545120-01-4
T 60 000 FH
T 30 000 CY
I 22 000 FH
I 11 000 CY
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5251
5275
5306
5340
5385
5392
5418
5438
5456
425
Y R
LUGS AT RIB 10
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
471CR 471DL 475BL 475BR 481CL 481CR 485BL
485BR
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-220-001
MRB 545123-01-1
NTM 54-51-23
T 60 000 FH
T 30 000 CY
I 19 600 FH
I 9 800 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
545123-01-1 PYLON/WING AFT ATTACHMENT SHACKLES AT 415 SDI
425
Y
SPECIAL DETAILED INSPECTION (US) OF PYLON TO WING AFT
ATTACHMENT SHACKLES AT RIB 10.
NOTE : SAMPLING 20%
Access panels :
471CL 472BR 475AL 475BL 476AR 476BR 481BL
482CR 485AL 485BL 486AR 486BR
Skills :
NDT 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-220-001
MRB 545123-01-5
NTM 54-51-23
T 60 000 FH
T 30 000 CY
I 19 600 FH
I 9 800 CY
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
545123-01-5 PYLON/WING AFT ATTACHMENT SHACKLES AT 415 SDI
425
Y R
SPECIAL DETAILED INSPECTION (US) OF PYLON TO WING AFT
ATTACHMENT SHACKLES AT RIB 10.
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
471CR 471DL 475AL 475AR 475BL 475BR 481CL
481DR 485AL 485AR 485BL 485BR
Skills :
NDT 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-014
MRB 545124-01-1
T 12 YE
I 12 YE
ALL 545124-01-1 PYLON/WING AFT ATTACH FITTING SLEEVES 415 DI
425
Y
DETAILED INSPECTION OF PYLON TO WING AFT ATTACHMENT
FITTING, SLEEVES AND BOLTS
SHACKLES
SLEEVES
ENGINE REMOVED
NOTE 3: CPCP
Skills :
AF 1 0.40 MHrs
AMM 545100/6
AMT 545100-200-015
MRB 545126-01-2
T 60 000 FH
T 30 000 CY
I 19 000 FH
I 9 500 CY
ALL 545126-01-2 PYLON LATERAL PANELS FASTENERS AREAS 410 DI
420
Y
DETAILED INSPECTION OF PYLON, LATERAL PANELS, IN THE
AREAS OF FASTENERS SECURING THE SUPPORTS OF ACCESS
DOORS, BETWEEN RIB 5 AND RIB 6, LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.40 MHrs
AMM 545100/6
AMT 545100-200-017
MRB 545131-01-2
T 60 000 FH
T 30 000 CY
I 19 400 FH
I 9 700 CY
ALL 545131-01-2 PYLON LATERAL PANELS CUTOUT CORNERS 410 DI
420
Y
DETAILED INSPECTION OF PYLON, LATERAL PANEL, IN AREAS
OF FASTENERS AT DOOR CUTOUT CORNERS, BETWEEN RIB 2
AND RIB 3, EXTERNAL SURFACE, LH/RH
NOTE : SAMPLING 20%
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-018
MRB 545133-01-1
T 60 000 FH
T 30 000 CY
I 26 200 FH
I 13 100 CY
ALL 545133-01-1 PYLON LWR SPAR RIB 1 AND 4 415 DI
425
Y
DETAILED INSPECTION OF PYLON, LOWER SPAR, IN AREAS OF
FASTENERS AT JUNCTION WITH LATERAL PANEL, BETWEEN RIB
1 AND RIB 4, LH/RH
NOTE : SAMPLING 20%
Access panels :
415AL 415AR 425AL 425AR
Skills :
AF 1 2.60 MHrs
AMT 545100-200-019
MRB 545134-01-6
T 60 000 FH
T 30 000 CY
I 19 800 FH
I 9 900 CY
ALL 545134-01-6 PYLON UPR SPAR RIB 4 AND 10 415 DI
425
N
DETAILED INSPECTION OF PYLON, UPPER SPAR, IN AREAS OF
FASTENERS AT JUNCTION WITH LATERAL PANEL, BETWEEN RIB
4 AND RIB 10, LH/RH
NOTE: SAMPLE 20%
Access panels :
471BL 471BR 471CL 471CR 471DL 481BL 481BR
481CL 481CR 481DR
Skills :
ENG 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-021
MRB 545156-01-1
T 10 YE
I 10 YE
2255
2261
2267
2303
2480
545156-01-1 PYLON UPPER SPARS UPPER SURFACE 415 DI
425
Y
DETAILED INSPECTION OF PYLON, UPPER SPARS, UPPER
SURFACE, FROM FORWARD OF RIB 1 TO RIB 10
PREP: PRE-COOLER
NOTE: CPCP
Access panels :
413CL 413DL 413EL 414CR 414FR 423CL 423DL
423FL 424CR 424ER 471AL 471BL 471CL 472AR
472BR 481AL 481BL 482AR 482BR 482CR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-021
MRB 545156-01-3
T 12 YE
I 12 YE
2974
3005
3013
3022
3198
3315
3355
425
Y
PREP: PRE-COOLER
NOTE: CPCP
Access panels :
413CL 413DL 413EL 414CR 414FR 423CL 423DL
423FL 424CR 424ER 471AL 471BL 471CL 472AR
472BR 481AL 481BL 482AR 482BR 482CR
Skills :
AF 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-021
MRB 545156-01-6
T 12 YE
I 12 YE
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
425
Y R
PREP: PRE-COOLER
NOTE: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
413CL 413CR 413DT 423CL 423CR 423DT 471AL
471AR 471BL 471BR 471CL 471CR 471DL 481AL
481AR 481BL 481BR 481CL 481CR 481DR
Skills :
AF 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-022
MRB 545161-01-1
T 10 YE
I 10 YE
2255
2261
2267
2303
2480
545161-01-1 PYLON UPPER SPAR LOWER SURFACE 415 DI
425
Y
DETAILED INSPECTION OF PYLON, UPPER SPAR, LOWER
SURFACE, FORWARD OF RIB 1
NOTE: CPCP
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-022
MRB 545161-01-2
T 12 YE
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
425
Y R
SURFACE, FORWARD OF RIB 1
NOTE: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-023
MRB 545162-01-1
T 10 YE
I 10 YE
2255
2261
2267
2303
2480
425
Y
TASK 545162-02-1
NOTE 4: CPCP
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 545100-200-023
MRB 545162-01-2
T 12 YE
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
425
Y R
TASK 545162-02-2
NOTE 4: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-024
MRB 545162-02-1
NTM 54-51-62
T 10 YE
I 10 YE
2255
2261
2267
2303
2480
545162-02-1 PYLON UPPER SPAR LOWER SURFACE 415 SDI
425
Y
UPPER SPAR, LOWER SURFACE, BETWEEN RIB 1 AND RIB 2,
RIB 3 AND RIB 4, AND RIB 8 AND RIB 10.
TASK 545162-01-1
NOTE 4: CPCP
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 545100-200-024
MRB 545162-02-2
NTM 54-51-62
T 12 YE
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
545162-02-2 PYLON UPPER SPAR LOWER SURFACE 415 SDI
425
Y R
UPPER SPAR, LOWER SURFACE, BETWEEN RIB 1 AND RIB 2,
RIB 3 AND RIB 4, AND RIB 8 AND RIB 10.
TASK 545162-01-2
NOTE 4: CPCP
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
NDT 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 545100/6
AMT 545100-200-025
MRB 545170-01-1
T 12 YE
I 12 YE
ALL 545170-01-1 PYLON PYRAMID MATING FACE 415 DI
425
Y
DETAILED INSPECTION OF PYLON, PYRAMID MATING FACE
WITH THE ENGINE FORWARD MOUNT FITTING
PREP. : ENGINE REMOVED
NOTE 3: CPCP
Skills :
AF 1 0.40 MHrs
AMM 545100/6
AMT 545100-200-026
MRB 545171-01-1
T 12 YE
I 12 YE
ALL 545171-01-1 PYLON ENGINE AFT ATTACHMENT BEAM 415 DI
425
Y
DETAILED INSPECTION OF PYLON, ENGINE AFT ATTACHMENT
BEAM MATING FACE WITH THE ENGINE AFT MOUNT FITTING
PREP. : ENGINE REMOVED
NOTE 3: CPCP
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 545400-220-002
ISB 54-1022
T 6 YE
I 6 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
545172-01-1 PYLON FWD CORNER FITTINGS 475 DI
476
485
486
Y
DETAILED INSPECTION OF AFT PYLON SECONDARYTTACHMENT
STRUCTURE, FORWARD CORNER FITTINGSFT MOUNT FITTING
NOTE: FOR OVERDUED AIRCRAFT, PERFORM THIS TASK IN NEXT
C CHECK
Access panels :
475AL 476AR 485AL 486AR
Skills :
AF 1 4.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AD 2012-0100
ISB 54A1026
I 3 000 FH
I 2 250 CY
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
545500-01-1 PYLON AFT MOVABLE FAIRING 470 DI
480
N R
DETAILED INSPECTION OF AFT PYLON MOVEABLE FAIRING,
LH/RH
NOTE 1: THRESHOLD IN ACCORDANCE WITH EASA AD 2012-0100.
NOTE 2: RII TASK
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
477AL 487AR
Skills :
B1 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 551634/6
AMT 551634-200-001
MRB 551001-01-1
T 6 YE
I 6 YE
ALL 551001-01-1 THS JACK FITTING 333 DI
343
Y
DETAILED INSPECTION OF HORIZONTAL STABILIZER, JACK
FITTING AND SURROUNDING EXTERNAL STRUCTURE
Access panels :
312AR
Skills :
AF 1 0.40 MHrs
AMM 551600/6
AMT 551600-200-002
MRB 551002-01-1
T 32 000 CY
I 24 000 CY
ALL 551002-01-1 THS UPR JOINT FITTING REAR AREA 333 DI
343
Y
DETAILED INSPECTION OF HORIZONTAL STABILIZER, UPPER
AND LOWER JOINT FITTINGS, EXTERNAL SURFACES, 5
REARMOST ROWS OF FASTENERS
NOTE : SAMPLING 20%
Access panels :
314AR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 551600/6
AMT 551600-200-001
MRB 551010-01-1
T 6 YE
I 6 YE
ALL 551010-01-1 THS HINGE AND ATTACH FITTINGS 333 DI
343
Y
DETAILED INSPECTION OF HORIZONTAL STABILIZER, REAR
SUPPORT FITTINGS, UPPER AND LOWER ATTACH FITTINGS AND
SURROUNDING EXTERNAL STRUCTURE, LH/RH
Access panels :
314AR
Skills :
AF 1 0.40 MHrs
AMM 551000/6
AMT 551000-210-001
MRB 551012-01-1
T 12 YE
I 12 YE
ALL 551012-01-1 THS SPARBOX INTERNAL STRUCTURE 333 DI
343
Y
DETAILED INSPECTION OF HORIZONTAL STABILIZER,
INTERNAL STRUCTURE OF TORQUE BOX, IINBOARD OF
FUSELAGE FAIRINGS
PREPARATION: PEELABLE HOLE COVERS REMOVED;
Access panels :
312AR 314AR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 551000/6
AMT 551000-210-002
MRB 551019-01-1
T 12 YE
I 12 YE
ALL 551019-01-1 THS TORQUE BOX INTERNAL STRUCTURE 333 DI
343
Y
DETAILED INSPECTION OF HORIZONTAL STABILIZER,
INTERNAL STRUCTURE OF TORQUE BOX, OUTBOARD OF
FUSELAGE FAIRINGS, LH/RH
PREPARATION : PEELABLE HOLE COVERS REMOVED
Access panels :
331AB 331BB 331CB 332AB 334AB 334AT 334BB
334BT 334CB 334CT 334DB 334DT 334EB 334FB
334GB 334HB 341AB 341BB 341CB 342AB 344AB
344AT 344BB 344BT 344CB 344CT 344DB 344DT
344EB 344FB 344GB 344HB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 551600/6
AMT 551600-200-004
MRB 551020-01-1
T 6 YE
I 6 YE
ALL 551020-01-1 ELEVATOR HINGE SUPPORTS AND FITTINGS 334 DI
344
Y
DETAILED INSPECTION OF HORIZONTAL STABILIZER, HINGE
FITTINGS AND SUPPORT RIBS AND ACTUATOR FITTINGS FOR
THE ELEVATOR, LH/RH
NOTE: CPCP
Access panels :
334AT 334BB 334BT 334CT 334DB 334DT 334FB
334HB 344AT 344BB 344BT 344CT 344DB 344DT
344FB 344HB
Skills :
AF 1 0.40 MHrs
AMM 552000/6
AMT 552000-200-003
MRB 552002-01-1
T 6 YE
I 6 YE
ALL 552002-01-1 ELEVATOR HINGE SUPPORT AND ACT. FTG. 335 DI
345
Y
DETAILED INSPECTION OF ELEVATOR, HINGE FITTINGS AND
ACTUATOR FITTINGS, LH/RH
NOTE: CPCP
Access panels :
334BB 334DB 334FB 334HB 335AB 335BB 335CB
335DB 344BB 344DB 344FB 344HB 345AB 345BB
345CB 345DB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 552000/6
AMT 552000-200-001
MRB 552004-01-1
NTM 51-10-03
NTM 55-20-04
T 6 YE
I 6 YE
ALL 552004-01-1 ELEVATOR SKIN PANELS 300 SDI Y
SPECIAL DETAILED (TAP TEST) INSPECTION OF ELEVATOR,
TOP AND BOTTOM SKIN PANELS IN AREA OF HINGE SUPPORTS
2, 3 AND 4 AND ACTUATOR FITTINGS 1 AND 2, LH/RH
Skills :
NDT 1 0.50 MHrs
AMM 552000/6
AMT 552000-200-002
MRB 552005-01-1
T 12 YE
I 12 YE
ALL 552005-01-1 ELEVATOR PANELS INTERNAL STRUCTURE 335 DI
345
Y
DETAILED INSPECTION OF ELEVATOR PANELS, INTERNAL
STRUCTURE AS FAR AS VISIBLE, LH/RH
PREP. :
PEELABLE HOLE COVERS REMOVED
Access panels :
334AB 334BB 334CB 334DB 334EB 334FB 334GB
334HB 335AB 335BB 335CB 335DB 344AB 344BB
344CB 344DB 344EB 344FB 344GB 344HB 345AB
345BB 345CB 345DB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 552000/6
AMT 552000-200-005
MRB 552006-01-2
T 12 YE
I 12 YE
ALL 552006-01-2 ELEVATOR OUTBOARD RIB 335 DI
345
Y
DETAILED INSPECTION OF ELEVATOR OUTBOARD RIB,
NOTE 1: CREDIT CAN BE TAKE FROM PREVIOUS ACCOMPLISHMENT
OF TASK 552005-01-1 IN CASE THIS INSPECTION WAS
PERFORMED PRIOR JUNE 2004.
PREP. : ELEVATOR TIP;
NOTE 2 : CPCP
Access panels :
332AB 342AB
Skills :
AF 1 0.60 MHrs
AMM 553000/6
AMT 553000-200-001
MRB 553003-01-1
T 12 YE
I 12 YE
ALL 553003-01-1 VERT STABILIZER CENTER BOX 321 DI
322
323
324
Y
DETAILED INSPECTION OF VERTICAL STABILIZER, CENTER
BOX, INTERNAL STRUCTURE AS FAR AS VISIBLE, FRONT SPAR
FORWARD FACE AND UPPER CLOSING RIB, UPPER SURFACE
PREP. : PEELABLE HOLE COVERS REMOVED
Access panels :
321AL 322AL 322BL 322CL 323AL 323AR 324AT
325AL 325AR 325BL 325BR 325CL 325CR 325DL
325DR 325EL 325ER
Skills :
AF 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 553600/6
AMT 553600-210-001
MRB 553004-01-1
T 6 YE
I 6 YE
ALL 553004-01-1 VERT STABILIZER ATTACH FITTINGS 323 DI Y
DETAILED INSPECTION OF VERTICAL STABILIZER, ATTACH
FITTINGS, INCLUDING LOAD INTRODUCTION AREA AT SKIN
PANELS
Access panels :
323AL 323AR
Skills :
AF 1 0.30 MHrs
AMM 553000/6
AMT 553000-210-001
MRB 553005-01-1
T 6 YE
I 6 YE
ALL 553005-01-1 RUDDER HINGE ARMS AND ACTUATOR 325 DI Y
DETAILED INSPECTION OF RUDDER HINGE ARM 1,2,3,4 AND 5
AND FIN ACTUATOR FITTINGS (ACTUATOR 1, 2 AND 3)
NOTE: CPCP
Access panels :
325BL 325CL
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 553000/6
AMT 553000-210-002
MRB 553006-01-2
T 6 YE
I 6 YE
ALL 553006-01-2 RUDDER HINGE ARM 6 AND 7 325 DI Y R
DETAILED INSPECTION OF RUDDER HINGE ARM 6 AND 7
NOTE 1: CPCP
NOTE 2: RII TASK
Access panels :
324AT 325DL 325EL 326CT
Skills :
AF 1 0.15 MHrs
AMM 554000/6
AMT 554000-210-001
MRB 554003-01-1
NTM 55-40-03
NTM 55-40-03/PART5
T 6 YE
I 6 YE
ALL 554003-01-1 RUDDER SIDE PANELS 300 SDI Y
SPECIAL DETAILED INSPECTION (US) OF RUDDER SIDE
PANELS, IN AREA OF RUDDER BEARINGS, IN THE BOOSTER
AREA AND AROUND TRAILING EDGE FASTENERS AND HOISTING
POINTS, LH/RH.
Skills :
NDT 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 554000/6
AMT 554000-210-003
MRB 554004-01-1
T 12 YE
I 12 YE
ALL 554004-01-1 RUDDER SIDE PANELS INTERNAL SURFACES 326 DI Y R
DETAILED INSPECTION OF RUDDER SIDE PANELS, INTERNAL
SURFACES
NOTE 1: ALTERNATIVE ACCESS: 325AR 325BR 325CR 325DR
325ER 326AT
NOTE 2: RII TASK
PREP: PEELABLE HOLE COVERS REMOVED
Access panels :
325AL 325BL 325CL 325DL 325EL 326AT
Skills :
AF 1 1.50 MHrs
AMM 554000/6
AMT 554000-210-004
MRB 554005-01-1
T 6 YE
I 6 YE
ALL 554005-01-1 RUDDER FITTINGS,ACT. ATTACH FITTINGS 326 DI Y
DETAILED INSPECTION OF RUDDER ATTACH FITTING 1,2,3,4
AND 5 AND RUDDER ACTUATOR ATTACH FITTINGS (ACTUATOR
1, 2 AND 3)
NOTE: NOTE: ON A/C POST SB 55-1030 ONLY RUDDER ACTUATOR
ATTACH FITTINGS (ACTUATOR 1, 2 AND 3) TO BE
INSPECTED.
NOTE: CPCP
Access panels :
325BL 325CL
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 554000/6
AMT 554000-210-005
MRB 554006-01-1
T 6 YE
I 6 YE
ALL 554006-01-1 RUDDER ATTACH FITTING 6 AND 7 326 DI Y
DETAILED INSPECTION OF RUDDER ATTACH FITTING 6 AND 7
NOTE: CPCP
Access panels :
324AT 325DL 325EL
Skills :
AF 1 0.20 MHrs
AMT 554000-220-001
MRB 554008-01-1
NTM 55-40-08
T 6 YE
I 6 YE
SPECIAL DETAILED INSPECTION (THERMOGRAPHIC) OF THE
HONEYCOMB CORE OF THE RUDDER SIDE PANELS, LH / RH.
NOTE: RUDDER WITH AN AGE OF 12 YE OR HIGHER, AT
APPROVAL DATE OF MRBR REVISION 16 (SEP 2011), SHOULD
TO BE INSPECTED NOT LATER THAN 12 MONTH AFTER
APPROVAL DATE OF MRBR REVISION 16 (SEP 2011).
RUDDER WITH AN AGE LOWER THAN 12 YE, AT APPROVAL DATE
OF MRBR REVISION 16 (SEP 2011), SHOULD PERFORM THE
INSPECTION WITHIN 24 MONTH AFTER APPROVAL DATE OF
MRBR REVISION 16 (SEP 2011), OR AT THE RUDDER
INSPECTION THRESHOLD DATE, WHICHEVER OCCURS THE
LATER.
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 554000-210-006
MRB 554009-01-1
NTM 55-40-09
T 6 YE
I 6 YE
SPECIAL DETAILED INSPECTION (ELCH TEST) OF THE
BONDING LAYERS BETWEEN RUDDER SIDE PANEL HONEYCOMB
STRUCTURE AND EXTERNAL SKINS OF THE RUDDER SIDE
PANELS, LH / RH.
NOTE: RUDDER WITH AN AGE OF 12 YE OR HIGHER, AT
APPROVAL DATE OF MRBR REVISION 16 (SEP 2011), SHOULD
TO BE INSPECTED NOT LATER THAN 12 MONTH AFTER
APPROVAL DATE OF MRBR REVISION 16 (SEP 2011).
RUDDER WITH AN AGE LOWER THAN 12 YE, AT APPROVAL DATE
OF MRBR REVISION 16 (SEP 2011), SHOULD PERFORM THE
INSPECTION WITHIN 24 MONTH AFTER APPROVAL DATE OF
MRBR REVISION 16 (SEP 2011), OR AT THE RUDDER
INSPECTION THRESHOLD DATE, WHICHEVER OCCURS THE
LATER.
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 56 WINDOWS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 562113/6
AMT 562113-200-001
MRB 562101-01-1
T 6 YE
I 6 YE
ALL 562101-01-1 WINDOW PANELS NT DI Y
DETAILED INSPECTION OF CABIN WINDOW PANES, INCLUDING
WINDOW PANES IN DOORS
NOTE: WORKING ZONES: 221, 222, 231, 232, 241, 242
251, 252, 261, 262
Access panels :
831
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-220-002
MRB 571106-01-3
NTM 57-11-06
T 60 000 FH
T 40 000 CY
I 23 400 FH
I 9 900 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
571106-01-3 CENTER WING BOX LWR SKIN 141 SDI
142
Y
SPECIAL DETAILED INSPECTION (HFEC) OF CENTER WING BOX
AT ENDS OF LOWER SKIN STIFFENERS, 8 TO 15, LH/RH.
Access panels :
147AZ 148AZ 734 744
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-220-002
MRB 571106-01-5
NTM 57-11-06
T 60 000 FH
T 31 000 CY
I 21 600 FH
I 9 200 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
571106-01-5 CENTER WING BOX LWR SKIN 141 SDI
142
Y R
SPECIAL DETAILED INSPECTION (HFEC) OF CENTER WING BOX
AT ENDS OF LOWER SKIN STIFFENERS, 8 TO 15, LH/RH.
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
147AZ 148AZ 734 744
Skills :
NDT 1 2.00 MHrs
AMM 571000/6
AMT 571000-200-004
MRB 571109-01-1
T 12 YE
I 12 YE
ALL 571109-01-1 CENTER WING BOX REAR SPAR 147 DI
148
Y
DETAILED INSPECTION OF CENTER WING BOX, REAR SPAR,
AROUND ACCESS DOOR CUTOUTS
NOTE : CPCP
Access panels :
147AZ 148AZ 734 744
Skills :
AF 1 0.76 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-006
MRB 571120-01-3
T 60 000 FH
T 48 000 CY
I 18 000 FH
I 7 600 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
571120-01-3 CENTER WING SPANWISE 137 DI
138
Y R
DETAILED INSPECTION OF CENTER WING SPANWISE FORMED
ANGLE, ALONG LOWER EDGE OF FRONT SPAR, FORWARD FACE
INSULATION REMOVED
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
825
Skills :
AF 1 0.66 MHrs
AMM 571000/6
AMT 571000-200-006
MRB 571120-01-5
T 60 000 FH
T 48 000 CY
I 15 600 FH
I 6 600 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
571120-01-5 CENTER WING SPANWISE 137 DI
138
Y
DETAILED INSPECTION OF CENTER WING SPANWISE FORMED
ANGLE, ALONG LOWER EDGE OF FRONT SPAR, FORWARD FACE
INSULATION REMOVED
NOTE : SAMPLING 20%
Access panels :
825
Skills :
AF 1 0.66 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-012
MRB 571122-01-1
T 6 YE
I 6 YE
ALL 571122-01-1 CENTER WING BOX REAR SPAR 147 DI
148
Y
DETAILED INSPECTION OF CENTER WING BOX, REAR SPAR AFT
FACE
NOTE: CPCP
Access panels :
734 744
AMM 571000/6
AMT 571000-200-013
MRB 571134-01-3
T 60 000 FH
T 30 000 CY
I 42 000 FH
I 18 900 CY
ALL 571134-01-3 CENTER WING BOX SKIN STGR 11-15 191 DI
192
195
196
Y
DETAILED INSPECTION OF CENTER WING BOX, BOTTOM SKIN
LOWER SURFACE, FROM STRINGER 11 TO STRINGER 15,
BETWEEN Y=+/-1292, AS FAR AS VISIBLE
NOTE : SAMPLING 20%
Access panels :
191BB 191CT 191EB 191KB 191LB 192CT 192EB
192FB 192KB 192LB 195AB 196AB 734 744
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-014
MRB 571135-01-3
T 60 000 FH
T 30 000 CY
I 42 000 FH
I 18 900 CY
ALL 571135-01-3 CENTER WING BOX SKIN STGR 6-11, 11-15 141 DI
142
Y
DETAILED INSPECTION OF CENTER WING BOX, BOTTOM SKIN
UPPER SURFACE, INCLUDING STRINGERS, FROM STRINGER 6
TO STRINGER 11, BETWEEN Y=+/-765 AND FROM STRINGER 11
TO STRINGER 15, BETWEEN Y=+/-1292
NOTE : SAMPLING 20%
Access panels :
147AZ 148AZ 734 744
Skills :
AF 1 1.00 MHrs
AMM 571000/6
AMT 571000-200-019
MRB 571154-01-1
T 6 YE
I 6 YE
ALL 571154-01-1 CENTER WING BOX LOWER SKIN 191 DI
192
195
196
Y
DETAILED INSPECTION OF CENTER WING BOX, LOWER SKIN
LOWER SURFACE, FROM FR 36 TO FR 42, BETWEEN RIB 1 LH
AND RIB 1 RH, INCLUDING LOWER SPLICE AT RIB 1, AS FAR
AS VISIBLE
NOTE : CPCP
Access panels :
191BB 191CT 191EB 191LB 192CT 192EB 192FB
192LB 195BB 196BB 734 744
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-016
MRB 571155-01-1
T 12 YE
I 12 YE
ALL 571155-01-1 CENTER WING BOX LOWER SKIN 191 DI
192
195
196
Y
DETAILED INSPECTION OF CENTER WING BOX, LOWER SKIN
LOWER SURFACE, FROM FR 36 TO FR 42 BETWEEN RIB 1 LH
AND RIB 1 RH, COVERED BY VAPOR SEAL
PREP. : AIR CONDITIONING PACKS
VAPOR SEAL (IF INSTALLED)
HEAT SHIELDS REMOVED
NOTE 3: CPCP
Access panels :
191BB 191CT 191EB 191KB 191LB 192CT 192EB
192FB 192KB 192LB 195AB 196AB 734 744
Skills :
AF 1 9.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-020
MRB 571156-01-1
T 12 YE
I 12 YE
ALL 571156-01-1 CENTER WING BOX FRONT SPAR 137 DI
138
Y
DETAILED INSPECTION OF CENTER WING BOX, FRONT SPAR,
FORWARD FACE
PREP. : FWD ACT(S) REMOVED (IF INSTALLED).LINING REMOVED
INSULATION REMOVED
NOTE 3: CPCP
Access panels :
825
Skills :
AF 1 1.00 MHrs
AMM 571000/6
AMT 571000-200-021
MRB 571157-01-1
T 12 YE
I 12 YE
ALL 571157-01-1 CENTER WING BOX UPPER SKIN 145 DI
146
Y
DETAILED INSPECTION OF CENTER WING BOX, UPPER SKIN
UPPER SURFACE AND BEAMS, INCLUDING FRAME FEET BETWEEN
FR 36 AND FR 42.
NOTE :-CAN BE PERFORMED AT SAME TIME AS 533135-01-1
-TPS MAY BE LIMITED TO CENTER WING BOX, UPPER
SKIN BEAMS, BETWEEN FR 36 AND FR 42
NOTE : CPCP
PREP. : CABIN FLOOR PANELS REMOVED
Skills :
AF 1 3.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-023
MRB 571181-01-3
NTM 57-11-81
T 60 000 FH
T 43 000 CY
I 40 100 FH
I 17 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
571181-01-3 CENTER WING BOX TRIFORM FITTING 141 SDI
142
Y R
SPECIAL DETAILED INSPECTION (US) OF CWB, UPPER
SURFACE OF TRIFORM FITTING (ON FIRST ROW OF FASTENERS
FROM RIB 1), BETWEEN STRINGER 8 AND FR 42, LH/RH
PREP. : SEALANT REMOVED;
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
147AZ 148AZ 734 744
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-023
MRB 571181-01-5
NTM 57-11-81
T 60 000 FH
T 43 000 CY
I 37 300 FH
I 15 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
571181-01-5 CENTER WING BOX TRIFORM FITTING 141 SDI
142
Y R
SPECIAL DETAILED INSPECTION (US) OF CWB, UPPER
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
147AZ 148AZ 734 744
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-024
MRB 571182-01-3
NTM 57-11-82
T 60 000 FH
T 45 000 CY
I 40 100 FH
I 17 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
571182-01-3 OUTER WING TRIFORM FITTING 540 SDI
640
Y R
SPECIAL DETAILED INSPECTION (US) OF OUTER WB, UPPER
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
Skills :
NDT 1 2.00 MHrs
AMM 571000/6
AMT 571000-200-024
MRB 571182-01-5
NTM 57-11-82
T 60 000 FH
T 43 000 CY
I 37 300 FH
I 15 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
571182-01-5 OUTER WING TRIFORM FITTING 540 SDI
640
Y
SPECIAL DETAILED INSPECTION (US) OF OUTER WB, UPPER
NOTE : SAMPLING 20%
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-025
MRB 571183-01-3
NTM 57-11-83
T 60 000 FH
T 40 000 CY
I 40 100 FH
I 17 000 CY
ALL 571183-01-3 CENTER WING BOX LOWER SPLICE AT RIB 1 191 SDI
192
195
196
Y
SPECIAL DETAILED INSPECTION (US) OF CWB, LOWER SPLICE
ON LOWER SKIN LOWER SURFACE AT RIB 1 (AT TWO CENTRAL
ROWS OF FASTENERS), BETWEEN STRINGER 8 AND FR 42,
LH/RH
NOTE : SAMPLING 20%
Access panels :
191LB 192LB 734 744
Skills :
NDT 1 4.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-017
MRB 571189-01-2
T 60 000 FH
T 30 000 CY
I 42 000 FH
I 19 000 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
571189-01-2 CENTER WING BOX STRINGER WEB 141 DI
142
Y R
DETAILED INSPECTION OF CENTER WING BOX,
STRINGER WEB AT JUNCTION WITH STRUT ATTACH
FITTINGS ON UPPER STRINGERS 2, 3, 8, 9, 15, 16
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
147AZ 148AZ 734 744
Skills :
AF 1 1.00 MHrs
AMM 571000/6
AMT 571000-200-017
MRB 571189-01-4
T 60 000 FH
T 30 000 CY
I 41 200 FH
I 17 700 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
571189-01-4 CENTER WING BOX STRINGER WEB 141 DI
142
Y
DETAILED INSPECTION OF CENTER WING BOX,
STRINGER WEB AT JUNCTION WITH STRUT ATTACH
FITTINGS ON UPPER STRINGERS 2, 3, 8, 9, 15, 16
NOTE : SAMPLING 20%
Access panels :
147AZ 148AZ 734 744
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 571000/6
AMT 571000-200-022
MRB 571199-01-1
T 12 YE
I 12 YE
ALL 571199-01-1 OUTER WING BOX EXTERNAL SURFACE 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING BOX, EXTERNAL
SURFACE OF RIB 1 AND UPPER SURFACE OF TRIFORM
FITTING, BETWEEN FRONT SPAR AND REAR SPAR
NOTE : CPCP
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
AMM 572000/6
AMT 572000-220-004
MRB 572001-01-1
T 12 YE
I 6 YE
ALL 572001-01-1 OUTER WING FRONT SPAR FWD FACE 521 DI
621
Y
DETAILED INSPECTION OF OUTER WING, FRONT SPAR FORWARD
FACE, BETWEEN RIB 1 AND RIB 8, INCLUDING VICINITY OF
CUTOUTS FOR SLAT TRACKS 1,2,3 AND 4
NOTE : CPCP
Access panels :
521AB 521BT 521CB 521EB 521GB 621AB 621BT
621CB 621EB 621GB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-003
MRB 572002-01-2
T 80 000 FH
T 48 000 CY
T 12 YE
I 21 900 FH
I 13 200 CY
I 12 YE
ALL 572002-01-2 OUTER WING FRONT SPAR ROOT JOINT FTG 540 DI
640
Y
FACE, UPPER AND LOWER ROOT JOINT FITTING
NOTE 3 : CPCP
Access panels :
540AB 540AZ 640AB 640AZ
AMM 572000/6
AMT 572000-200-006
MRB 572008-01-2
NTM 572008
T 60 000 FH
T 48 000 CY
I 20 000 FH
I 11 000 CY
ALL 572008-01-2 OUTER WING REAR SPAR JOINT PLATE 574 SDI
674
Y
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF OUTER WING
REAR SPAR AFT FACE SPAR JOINT PLATE AT RIB 6.
NOTE : SAMPLING 20%
Access panels :
574AB 574BB 674AB 674BB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-007
MRB 572010-01-2
T 58 900 FH
T 30 000 CY
T 12 YE
I 24 400 FH
I 11 800 CY
I 12 YE
ALL 572010-01-2 OUTER WING REAR SPAR ROOT JOINT FTG 540 DI
640
Y
FACE, UPPER AND LOWER ROOT JOINT FITTINGS
NOTE 3: CPCP
Access panels :
540AB 540BZ 640AB 640BZ
AMM 572000/6
AMT 572000-220-001
MRB 572012-01-2
T 60 000 FH
T 48 000 CY
I 21 600 FH
I 13 400 CY
ALL 572012-01-2 OUTER WING TOP SKIN UPR SURFACE 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING TOP
SKIN UPPER SURFACE AT ATTACHMENT TO FRONT SPAR
AND REAR SPAR BETWEEN RIB 1 AND RIB 8
NOTE : SAMPLING 20%
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-009
MRB 572019-01-2
T 60 000 FH
T 48 000 CY
I 23 400 FH
I 16 800 CY
ALL 572019-01-2 OUTER WING TOP SKIN STGR CROWN FTG 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, TOP SKIN STRINGER
CROWN FITTINGS AT ROOT JOINT, FROM FRONT SPAR TO REAR
SPAR
NOTE : SAMPLING 20%
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
Skills :
AF 1 0.68 MHrs
AMM 572000/6
AMT 572000-200-011
MRB 572022-01-1
T 12 YE
I 12 YE
ALL 572022-01-1 OUTER WING TOP SKIN LWR SURFACE 521 DI
540
621
640
Y
DETAILED INSPECTION OF OUTER WING, TOP SKIN, LOWER
SURFACE PYLON REINFORCING PLATE
NOTE 1: 100% THRESHOLD = 24YE
NOTE 3: CPCP
Access panels :
521BT 540BB 540CB 621BT 640BB 640CB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-013
MRB 572024-01-2
T 60 000 FH
T 42 000 CY
I 24 600 FH
I 17 600 CY
ALL 572024-01-2 OUTER WING RIBS OUTBOARD FACE 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING RIBS,
OUTBOARD FACE OF RIB 2, RIB 3 AND RIB 4 AT
SKIN ATTACHMENTS ( INCLUDING CLEATS ) SPAR
ATTACHMENTS AND REGION OF STRINGER CUTOUTS
NOTE : SAMPLING 20%
Access panels :
540AB 640AB
Skills :
AF 1 6.00 MHrs
AMM 572000/6
AMT 572000-200-014
MRB 572026-01-5
T 60 000 FH
T 34 000 CY
I 21 000 FH
I 10 000 CY
ALL 572026-01-5 OUTER WING BOLTED PANEL 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, RIB 5, AFT OF
BOLTED PANEL
NOTE : SAMPLING 20%
Access panels :
540AB 540BB 640AB 640BB
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572000-200-015 T 60 000 FH
T 48 000 CY
I 26 500 FH
I 16 000 CY
ALL 572027-01-4 OUTER WING RIB 5 AND RIB 6 540 DI
640
N
DETAILED INSPECTION OF OUTER WING, RIB 5 AND RIB 6 AT
SKIN ATTACHMENTS (INCLUDING CLEATS) SPAR ATTACHMENTS,
ACCESS CUTOUT SURROUNDS AND IN REGION OF STRINGER
CUTOUTS, EXCLUDING THE AREA INSIDE THE DRY BAY
Access panels :
540AB 540BB 640AB 640BB
AMT 572000-200-016 T 60 000 FH
T 48 000 CY
I 27 900 FH
I 20 000 CY
ALL 572028-01-2 OUTER WING RIB 7 AND 8 540 DI
640
N
DETAILED INSPECTION OF OUTER WING, RIB 7 AND RIB 8
AND PYLON REAR FITTING EXCLUDING PICK-UP LUG
NOTE: SAMPLING 20%
Access panels :
540BB 540CB 640BB 640CB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-017
MRB 572029-01-3
T 60 000 FH
T 44 000 CY
I 30 000 FH
I 22 000 CY
ALL 572029-01-3 OUTER WING BOTTOM SKIN RIB 1-7 500 DI
600
Y
SKIN LOWER SURFACE AT ATTACHMENT TO FRONT SPAR
BETWEEN RIB 1 AND RIB 7 EXCLUDING AREA COVERED
BY PYLON FAIRING AND PYLON REINFORCING
NOTE : SAMPLING 20%
Skills :
AF 1 0.02 MHrs
AMM 572000/6
AMT 572000-200-019
MRB 572031-01-2
T 60 000 FH
T 48 000 CY
I 22 900 FH
I 16 400 CY
ALL 572031-01-2 OUTER WING BOTTOM SKIN LWR SURFACE 411 DI
421
500
600
Y
SURFACE AT FRONT SPAR MASKED BY PYLON FAIRING AND
VISIBLE PORTION OF PYLON REINFORCING PLATE
PREP.: PYLON FAIRINGS REMOVED
NOTE : SAMPLING 20%
Skills :
AF 1 0.80 MHrs
AMM 572000/6
AMT 572000-200-021
MRB 572033-01-2
NTM 57-20-33
T 52 500 FH
T 30 000 CY
I 25 900 FH
I 16 000 CY
ALL 572033-01-2 OUTER WING BOTTOM SKIN LDG PLATE 540 SDI
640
Y
SPECIAL DETAILED INSPECTION (X-RAY) OF OUTER WING,
BOTTOM SKIN, FORWARD OF REAR SPAR IN AREA MASKED BY
MLG REINFORCING PLATE INCLUDING ATTACHMENT TO REAR
SPAR.
NOTE : SAMPLING 20%
Access panels :
540AB 540BB 640AB 640BB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572000-220-804 T 57 000 FH
T 32 800 CY
I 9 200 FH
I 5 300 CY
ALL 572037-02-5 OUTER WING 471 DI
481
N
SURFACE ATTACHMENT TO REAR SPAR IN AREA COVERED BY
PYLON FAIRING
PREP.: REMOVE PYLON FAIRINGS;
NOTE: SAMPLING 20%
AMM 572000-200-001 T 12 YE
I 6 YE
ALL 572040-01-2 OUTER WING BOTTOM SKIN CUTOUTS 540 SDI
640
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN, UPPER
AND LOWER SURFACES, AROUND ACCESS DOOR CUTOUTS IN RIB
BAY 2-3 AND RIB BAY 6-7
NOTE: CPCP
Access panels :
540AB 540BB 640AB 640BB
Skills :
NDT 0 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-032
NTM 57-20-40
T 51 300 FH
T 30 000 CY
I 25 600 FH
I 15 000 CY
ALL 572040-03-3 OUTER WING BOTTOM SKIN CUTOUTS 500 SDI
540
600
640
Y
SPECIAL DETAILED INSPECTION (EDDY CURRENT) OF OUTER
WING, BOTTOM SKIN, UPPER AND LOWER SURFACES, AROUND
ACCESS DOOR CUTOUTS IN RIB BAY 2-3 AND RIB BAY 6-7.
NOTE : SAMPLING 20%
Access panels :
540AB 540BB 640AB 640BB
Skills :
NDT 1 2.00 MHrs
AMT 572000-200-024
MRB 572047-01-5
NTM 57-20-47
T 44 900 FH
T 30 000 CY
I 16 600 FH
I 11 100 CY
ALL 572047-01-5 OUTER BOTTOM SKIN LOWER SURFACE 471 SDI
481
N
SPECIAL DETAILED INSPECTION (EDDY CURRENT) OF OUTER
WING, BOTTOM SKIN, LOWER SURFACE AROUND AFT PYLON
ATTACHMENT FITTING CUTOUT
PREPARATION: PYLON FAIRINGS REMOVED
NOTE: SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 574100-200-003
MRB 572049-01-3
I 6 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
572049-01-3 OUTER WING BOTTOM SKIN DRAIN HOLES 500 DI
600
N
SURFACE AT DRAIN HOLES FOR TRACK CANS, 1,2,3,& 4 (RIB
BAYS 1-2, 2-3, 4-5, 5-6) MAGNETIC LEVEL INDICATOR
HOLE ADJACENT TO RIB 6; MLG PICK UP RAIL HOLE FORWARD
OF REAR SPAR INBOARD IF RIB 5.
13 AMD 00 EFFECTIVE DATE IS NEXT 6YE CHECK.
NOTE 2: CPCP
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-003
MRB 572049-01-4
T 6 YE
I 6 YE
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
572049-01-4 OUTER WING BOTTOM SKIN DRAIN HOLES 500 DI
600
Y R
SURFACE AT DRAIN HOLES FOR TRACK CANS, 1,2,3,& 4 (RIB
BAYS 1-2, 2-3, 4-5, 5-6), DRY BAY DRAIN HOLE IN RIB
BAY 6-7; MAGNETIC LEVEL INDICATOR
HOLE ADJACENT TO RIB 6, MLG PICK UP RAIL HOLE FORWARD
OF REAR SPAR INBOARD OF RIB 5.
NOTE : CPCP
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
Skills :
AF 1 0.18 MHrs
AMM 572000/6
AMT 572000-200-025
MRB 572052-01-2
T 12 YE
I 12 YE
ALL 572052-01-2 OUTER WING BOTTOM SKIN ROOT JOINT FTG 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN ROOT
JOINT FITTINGS ON STRINGER 8 AND STRINGER 11
NOTE 3: CPCP
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-002
MRB 572054-01-4
T 60 000 FH
T 48 000 CY
T 12 YE
I 25 500 FH
I 14 300 CY
I 12 YE
ALL 572054-01-4 OUTER WING BOTTOM SKIN PUMP APERTURES 500 DI
600
Y
SURFACE AT FUEL PUMP APERTURES BETWEEN RIB 1 AND RIB 2
PREP. : FUEL PUMP
NOTE 3: CPCP
Skills :
AF 1 1.38 MHrs
AMT 572000-220-805 T 6 YE
I 6 YE
ALL 572054-02-1 OUTER WING BOTTOM SKIN PUMP APERTURES 500 DI
600
N
SURFACE AT HOLES ADJACENT TO FUEL PUMP APERTURES
NOTE 1: CPCP
Skills :
B1 1 0.26 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-027
MRB 572057-01-2
NTM 57-20-57
T 60 000 FH
T 43 500 CY
I 33 200 FH
I 20 600 CY
ALL 572057-01-2 OUTER WING BOTTOM SKIN RIB BAY 7-8 471 SDI
481
Y
BOTTOM SKIN LOWER SURFACE, HOT FUEL RECIRCULATION
HOLE AT RIB BAY 7-8, BETWEEN STRINGER 4 AND STRINGER
5.
PREP.: PYLON FAIRINGS REMOVED
NOTE : SAMPLING 20%
Skills :
NDT 1 1.00 MHrs
AMM 572000/6
AMT 572000-220-003
MRB 572062-01-1
T 12 YE
I 6 YE
ALL 572062-01-1 OUTER WING FIXED TRAILING EDGE 571 DI
574
671
674
Y
DETAILED INSPECTION OF OUTER WING FIXED
TRAILING EDGE, REAR SPAR AFT FACE, BETWEEN GEAR
SUPPORT RIB 5 AND RIB 8
NOTE : CPCP
Access panels :
574AB 574BB 674AB 674BB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572000/6
AMT 572000-200-031
MRB 572063-01-1
T 6 YE
I 6 YE
ALL 572063-01-1 OUTER WING FIXED TRAILING EDGE 500 DI
600
Y
SURFACE, AREA COVERED BY FUEL PUMP WIRING HARNESS
FAIRINGS.
PREP. : FUEL PUMP FAIRINGS
WIRING HARNESS DISPLACED
NOTE 3: CPCP
Skills :
AF 1 0.10 MHrs
AMM 572100/6
AMT 572100-200-006
MRB 572101-01-2
T 26 700 FH
T 16 100 CY
T 12 YE
I 26 700 FH
I 16 100 CY
I 12 YE
ALL 572101-01-2 OUTER WING FRT SPAR FWD FACE RIB 8-22 522 DI
622
Y
FACE, BETWEEN RIB 8 AND RIB 22, INCLUDING ALL CUTOUTS
NOTE 3: CPCP
Access panels :
522AB 522CB 522EB 522FB 522HB 522JB 522KB
522LB 522NB 522QB 622AB 622CB 622EB 622FB
622HB 622JB 622KB 622LB 622NB 622QB
Skills :
AF 1 1.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-007
MRB 572106-01-4
T 60 000 FH
T 45 500 CY
T 12 YE
I 37 300 FH
I 26 700 CY
I 12 YE
ALL 572106-01-4 OUTER WING FRT SPAR FWD FACE RIB 22-27 522 DI
622
Y
FACE, BETWEEN RIB 22 AND RIB 27, INCLUDING ALL
CUTOUTS
NOTE 3: CPCP
Access panels :
522QB 522SB 522UB 622QB 622SB 622UB
Skills :
AF 1 0.60 MHrs
AMM 572100/6
AMT 572100-200-008
MRB 572108-01-3
T 49 500 FH
T 30 000 CY
I 21 100 FH
I 12 700 CY
ALL 572108-01-3 OUTER WING FRT SPAR AFT FACE RIB 8-22 540 DI
640
Y
DETAILED INSPECTION OF OUTER WING FRONT
SPAR AFT FACE BETWEEN RIB 8 AND RIB 22
NOTE : SAMPLING 20%
Access panels :
540CB 540DB 540EB 540FB 540GB 540HB 540JB
540KB 540LB 540MB 540NB 540PB 540QB 540RB
640CB 640DB 640EB 640FB 640GB 640HB 640JB
640KB 640LB 640MB 640NB 640PB 640QB 640RB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-009
MRB 572109-01-2
T 60 000 FH
T 48 000 CY
I 24 600 FH
I 17 600 CY
ALL 572109-01-2 OUTER WING FRT SPAR AFT FACE RIB 22-27 550 DI
560
650
660
Y
FACE, BETWEEN RIB 22 AND RIB 27
NOTE : SAMPLING 20%
Access panels :
550AB 550BB 550CB 550DB 560AB 650AB 650BB
650CB 650DB 660AB
Skills :
AF 1 0.80 MHrs
AMT 572100-220-801 T 53 800 FH
T 30 000 CY
I 26 900 FH
I 15 000 CY
ALL 572116-02-2 MAIN STRUCTURE 500 DI
600
N
DETAILED INSPECTION OF OUTER WING, TOP SKIN, UPPER
SURFACE AT ATTACHMENT TO FRONT SPAR AND REAR SPAR
NOTE: SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-001
MRB 572122-01-1
T 60 000 FH
T 48 000 CY
I 32 100 FH
I 20 000 CY
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
572122-01-1 OUTER WING TOP SKIN RIB 19-20 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING, TOP SKIN, UPPER
SURFACE AROUND MANUAL REFUELLING APERTURE, BETWEEN
RIB 19 AND RIB 20
PREP.: ADAPTOR RING
NOTE : SAMPLING 20%
Skills :
AF 1 1.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-032
MRB 572122-02-1
T 6 YE
I 6 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
572122-02-1 OUTER WING TOP SKIN RIB 19-20 500 DI
600
Y
SKIN, UPPER SURFACE AROUND MANUAL REFUELLING
APERTURE BETWEEN RIB 19 AND RIB 20
NOTE : CPCP
Skills :
AF 1 0.02 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572100-200-012 T 52 500 FH
T 30 000 CY
I 29 000 FH
I 20 000 CY
ALL 572123-01-3 OUTER WING TOP SKIN STGR RIB 8-13 540 DI
640
N
DETAILED INSPECTION OF OUTER WING, TOP SKIN,
STRINGERS BETWEEN RIB 8 AND RIB 13, INCLUDING RUNOUTS
AND AIR TRANSFER HOLES, STRINGERS JOINT BETWEEN RIB 8
AND RIB 9 AND BUTT STRAP AT STRINGER 11
Access panels :
540CB 540DB 540EB 540FB 540GB 640CB 640DB
640EB 640FB 640GB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-013
MRB 572124-01-2
T 52 900 FH
T 30 000 CY
I 35 100 FH
I 22 000 CY
ALL 572124-01-2 OUTER WING TOP SKIN STGR RIB 13-27 540 DI
550
560
640
650
660
Y
SKIN STRINGERS BETWEEN RIB 13 AND RIB 27
INCLUDING RUNOUTS, AIR TRANSFER HOLES AND
BUTTSTRAP AT STRINGER 11 INCLUDING RUNOUT AT
FRONT SPAR AT RIB 18
NOTE : SAMPLING 20%
Access panels :
540HB 540JB 540KB 540LB 540MB 540NB 540PB
540QB 540RB 550AB 550BB 550CB 550DB 560AB
640HB 640JB 640KB 640LB 640MB 640NB 640PB
640QB 650AB 650BB 650CB 650DB 660AB
Skills :
AF 1 13.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572100-270-001
ISB 57-1154
I 40 MO
See note
NT Check :
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
572125-01-1 TOP SKIN PANEL 2 OVERHANG BETWEEN RIB 22 575 SDI
675
Y
AND RIB 27
SPECIAL DETAILED INSPECTION OF OUTER WING, TOP SKIN
PANEL 2 OVERHANG BETWEEN RIB 22 AND RIB 27
NOTE : - FOR THRESHOLD REFER TO ISB 57-1154.
- REFER TO ISB 57-1154 FOR ALTERNATIVE TASK
TERMINATING THIS INSPECTION.
Skills :
NDT 2 12.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572100-200-014 T 52 500 FH
T 30 000 CY
I 31 900 FH
I 20 000 CY
ALL 572126-01-3 OUTER WING RIB9-27 AT SKIN ATTACHMENTS 540 DI
550
560
640
650
660
N
DETAILED INSPECTION OF OUTER WING, RIB 9 TO RIB 27,
AT SKIN ATTACHMENTS, INCLUDING CLEATS, SPAR
ATTACHMENTS AND IN REGION OF STRINGER CUTOUTS
NOTE: SAMPLING 20%
Access panels :
540CB 540DB 540EB 540FB 540GB 540HB 540JB
540KB 540LB 540MB 540NB 540PB 540QB 540RB
550AB 550BB 550CB 550DB 560AB 640CB 640DB
640EB 640FB 640GB 640HB 640JB 640KB 640LB
640MB 640NB 640PB 640QB 640RB 650AB 650BB
650CB 650DB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572100-270-002
ISB 1155
I 40 MO
See note
NT Check :
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
572127-01-1 TOP SKIN PANEL 2 OVERHANG BETWEEN RIB 4 575 SDI
675
Y
AND RIB 22
SPECIAL DETAILED INSPECTION OF OUTER WING, TOP SKIN
PANEL 2 OVERHANG BETWEEN RIB 4 AND RIB 22
NOTE : - FOR THRESHOLD REFER TO ISB 57-1155.
- REFER TO ISB 57-1155 FOR ALTERNATIVE TASK
TERMINATING THIS INSPECTION.
Skills :
NDT 2 32.00 MHrs
AMM 572100/6
AMT 572100-200-017
MRB 572131-01-5
T 59 100 FH
T 34 000 CY
I 34 300 FH
I 19 700 CY
ALL 572131-01-5 OUTER WING BOTTOM SKIN LWR SURFACE 500 DI
600
Y
NOTE : SAMPLING 20%
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-018
MRB 572134-01-3
T 52 500 FH
T 30 000 CY
I 42 000 FH
I 24 000 CY
ALL 572134-01-3 OUTER WING BOTTOM SKIN TRACK 3 AND 4 540 DI
640
Y
SURFACE IN AREAS OF FLAP TRACK 3 AND 4 FORWARD AND
AFT PICK UP FITTINGS, INCLUDING ATTACHMENT TO REAR
SPAR
NOTE : SAMPLING 20%
Access panels :
540FB 540GB 540NB 540PB 640FB 640GB 640NB
640PB
Skills :
AF 1 0.40 MHrs
AMT 572100-200-004
MRB 572139-01-2
T 12 YE
I 6 YE
ALL 572139-01-2 OUTER WING BOTTOM SKIN RIB BAY CUTOUTS 500 DI
540
600
640
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN, UPPER
AND LOWER SURFACES AROUND ACCESS DOOR CUTOUTS IN RIB
BAYS 8-9, 9-10, 10-11, 11-12 AND 12-13
NOTE: CPCP
Access panels :
540CB 540DB 540EB 540FB 540GB 640CB 640DB
640EB 640FB 640GB
Skills :
AF 1 0.52 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-020
MRB 572139-02-2
NTM 57-21-39
T 52 100 FH
T 30 000 CY
I 17 700 FH
I 10 200 CY
ALL 572139-02-2 OUTER WING BOTTOM SKIN RIB BAY CUTOUTS 500 SDI
540
600
640
Y
BOTTOM SKIN, UPPER AND LOWER SURFACES AROUND ACCESS
DOOR CUTOUTS IN RIB BAYS 8-9, 9-10, 10-11, 11-12 AND
12-13.
NOTE : SAMPLING 20%
Access panels :
540CB 540DB 540EB 540FB 540GB 640CB 640DB
640EB 640FB 640GB
Skills :
NDT 1 2.00 MHrs
AMM 572100/6
AMT 572100-200-021
MRB 572140-01-2
T 12 YE
I 90 MO
ALL 572140-01-2 OUTER WING BOTTOM SKIN CUTOUTS NT DI Y
SURFACES, AROUND ACCESS DOOR CUTOUTS IN ALL BAYS,
NOTE 1: CPCP
NOTE 2: WORKING ZONES: 500, 540, 550, 560
600, 640, 650, 660
Access panels :
540HB 540JB 540KB 540LB 540MB 540NB 540PB
540QB 540RB 550AB 550BB 550CB 550DB 560AB
640HB 640JB 640KB 640LB 640MB 640NB 640PB
640QB 640RB 650AB 650BB 650CB 650DB 660AB
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-024
MRB 572151-01-3
T 48 700 FH
T 30 000 CY
I 20 300 FH
I 12 500 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
633
Y R
SKIN LOWER SURFACE SPANWISE SKIN JOINTS AT
STRINGER 8 AND STRINGER 11 BETWEEN RIB 18 AND
RIB 20 IN AREA COVERED BY FLAP TRACK 4 FAIRING
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
533CB 533EB 633CB 633EB
Skills :
AF 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-024
MRB 572151-01-4
T 48 700 FH
T 30 000 CY
I 15 900 FH
I 9 800 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
633
Y R
SKIN LOWER SURFACE SPANWISE SKIN JOINTS AT
STRINGER 8 AND STRINGER 11 BETWEEN RIB 18 AND
RIB 20 IN AREA COVERED BY FLAP TRACK 4 FAIRING
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
533CB 533EB 633CB 633EB
Skills :
AF 1 0.04 MHrs
AMM 572100/6
AMT 572100-200-025
MRB 572153-01-1
T 6 YE
I 6 YE
ALL 572153-01-1 OUTER WING BOTTOM SKIN DRAIN HOLES 500 DI
600
Y
SURFACE AT DRAIN HOLES FOR TRACK CANS 5,6,7,8,9,10,11,12
(RIB BAYS 9-10,11-12,13-14,16-17,18-19,21-22,23-24,25-26)
DRY BAY DRAIN HOLES IN RIB BAY 26-27 AND MAGNETIC LEVEL
INDICATOR POSITIONS ADJACENT TO RIB 9 AND RIB 12
NOTE : CPCP
Skills :
AF 1 0.24 MHrs
AMM 572100/6
AMT 572100-200-027
MRB 572157-01-2
NTM 57-21-57
T 52 500 FH
T 30 000 CY
I 33 200 FH
I 20 000 CY
ALL 572157-01-2 OUTER WING BOTTOM SKIN RUNOUT 500 SDI
600
Y
SPECIAL DETAILED INSPECTION (X-RAY) OF OUTER WING,
BOTTOM SKIN, RUNOUT OF BUTTSTRAP AT STRINGER 8,
BETWEEN RIB 20 AND RIB 21, ADJACENT TO FRONT SPAR AND
RUNOUT OF BUTTSTRAP AT STRINGER 11 ADJACENT TO RIB 21
AT REAR SPAR.
NOTE : SAMPLING 20%
Access panels :
540PB 540QB 540RB 640PB 640QB 640RB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572100/6
AMT 572100-200-030
MRB 572161-01-6
T 60 000 FH
T 48 000 CY
T 12 YE
I 21 100 FH
I 12 300 CY
I 12 YE
ALL 572161-01-6 OUTER WING BOTTOM SKIN ACCESS DOORS 540 DI
550
560
640
650
660
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN ACCESS
DOORS, BETWEEN RIB 13 AND RIB 27
NOTE 3: CPCP
Access panels :
540HB 540JB 540KB 540LB 540MB 540NB 540PB
540QB 540RB 550AB 550BB 550CB 550DB 560AB
640HB 640JB 640KB 640LB 640MB 640NB 640PB
640QB 640RB 650AB 650BB 650CB 650DB 660AB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-005
MRB 572164-01-2
T 6 YE
I 6 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
572164-01-2 OUTER WING BOTTOM SKIN FUEL DRAIN 500 DI
600
Y
SURFACE AT FUEL TANK WATER DRAIN HOLES BETWEEN RIB
22-23, AND MAGNETIC LEVEL INDICATOR POSITION BETWEEN
RIB 15-16
NOTE : CPCP
Skills :
AF 1 0.14 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-005
MRB 572164-01-3
T 6 YE
I 6 YE
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
572164-01-3 OUTER WING BOTTOM SKIN FUEL DRAIN 500 DI
600
Y R
SURFACE AT FUEL TANK WATER DRAIN HOLES RIB 22-23
NOTE : CPCP
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
5456
5469
5495
5555
5699
5709
5916
5958
5994
Skills :
AF 1 0.14 MHrs
AMM 572600/6
AMT 572600-200-004
MRB 572601-01-2
T 48 000 CY
I 6 100 CY
ALL 572601-01-2 FLAP TRACK BEAMS UPR FLANGE RADII 531 DI
532
533
631
632
633
Y
DETAILED INSPECTION OF OUTER WING, FLAP TRACK BEAMS
2,3,4 TRACK UPPER FLANGE RADII
NOTE: THIS TASK IS AN ALTERNATIVE TO TASK 572601-02-2
NOTE : SAMPLING 20%
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631CB
631EB 632CB 632EB 633CB 633EB
Skills :
AF 1 0.90 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572600/6
AMT 572600-220-003
MRB 572601-02-2
NTM 57-26-01
T 48 000 CY
I 12 300 CY
ALL 572601-02-2 FLAP TRACK BEAMS UPR FLANGE RADII 531 SDI
532
533 DI
631
632
633
Y
FLAP TRACK BEAMS 2,3,4 TRACK UPPER FLANGE RADII
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631CB
631EB 632CB 632EB 633CB 633EB
AMM 572600/6
AMT 572600-200-005
MRB 572604-01-3
T 48 000 CY
I 6 100 CY
ALL 572604-01-3 FLAP TRACK BEAMS LWR FLANGES 531 DI
532
533
631
632
633
Y
2,3,4 LOWER FLANGES AND LOWER CHANNEL
PREP.: FLAP EXTENSION
NOTE : SAMPLING 20%
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631CB
631EB 632CB 632EB 633CB 633EB
Skills :
AF 1 0.90 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572600/6
AMT 572600-200-006
MRB 572607-01-2
T 6 YE
I 6 YE
ALL 572607-01-2 FLAP TRACK BEAMS FWD SPIGOT ATTACH 531 DI
532
533
631
632
633
Y
2,3,4 FORWARD SPIGOT PINS, BOLTS AND FITTINGS.
NOTE : CPCP
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631CB
631EB 632CB 632EB 633CB 633EB
Skills :
AF 1 0.90 MHrs
AMM 572600/6
AMT 572600-220-004
MRB 572607-02-2
T 48 000 CY
I 7 300 CY
ALL 572607-02-2 FLAP TRACK BEAMS FWD SPIGOT ATTACH 531 DI
532
533
631
632
633
Y
2,3,4 FORWARD SPIGOT PINS, BOLTS AND FITTINGS
NOTE: REFER TO AMM FOR GAP CHECK
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631AB
631BB 632AB 632BB 633AB 633BB
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572600/6
AMT 572600-220-005
MRB 572610-01-2
T 48 000 CY
I 12 300 CY
ALL 572610-01-2 FLAP TRACK BEAMS AFT SPIGOT 531 DI
532
533
631
632
633
Y
2,3,4 AFT SPIGOT
NOTE 1: REFER TO AMM FOR TORQUE CHECK
Access panels :
531CB 532CB 533CB 631CB 632CB 633CB
Skills :
AF 1 1.20 MHrs
AMM 572600/6
AMT 572600-200-010
MRB 572610-02-1
T 6 YE
I 6 YE
ALL 572610-02-1 FLAP TRACK BEAMS AFT SPIGOT 531 DI
532
533
631
632
633
Y
2,3,4 AFT SPIGOT
NOTE : CPCP
TPS: "NO" (TPS MUST NOT BE APPLIED)
Access panels :
531CB 532CB 533CB 631CB 632CB 633CB
Skills :
AF 1 1.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572600/6
AMT 572600-200-008
MRB 572650-01-1
T 12 YE
I 12 YE
ALL 572650-01-1 OUTER WING REAR SPAR SIDESTAY FITTING 571 DI
671
Y
DETAILED INSPECTION OF OUTER WING, REAR SPAR AFT FACE
SIDESTAY FITTING
NOTE 3: CPCP
Skills :
AF 1 0.40 MHrs
AMM 572600/6
AMT 572600-200-007
MRB 572651-01-1
T 6 YE
I 6 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
572651-01-1 OUTER WING REAR SPAR JACK FITTING 571 DI
671
Y
DETAILED INSPECTION OF OUTER WING REAR
SPAR AFT FACE, RETRACTION JACK FITTING
PREP.: RETRACTION ANCHORAGE ACTUATOR REMOVED;
BEARING ASSEMBLY REMOVED;
NOTE : CPCP
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 572600-200-007 I 6 YE
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
572651-01-2 OUTER WING REAR SPAR JACK FITTING 571 DI
671
Y R
OUTER WING REAR SPAR JACK FITTING
DETAILED INSPECTION OF OUTER WING, REAR SPAR AFT FACE
RETRACTION JACK FITTING
NOTE: REMOVAL OF ACTUATOR AND BEARING ASSEMBLY NOT
REQUIRED FOR POST 39730 OR POST 150311 AIRCRAFT.
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.10 MHrs
AMM 572600/6
AMT 572600-200-001
MRB 572653-01-2
T 48 000 CY
T 12 YE
I 16 400 CY
I 12 YE
ALL 572653-01-2 FLAP TRACK 2 AFT ATTACH FITTINGS 531 DI
532
533
631
632
633
Y
DETAILED INSPECTION OF OUTER WING, FLAP TRACK 2, AFT
ATTACHMENT FITTINGS ON WING BOTTOM SKIN AT FALSE REAR
SPAR, AND FLAP TRACK 3 & 4, AFT ATTACHMENT FITTINGS
AT REAR SPAR
NOTE 3: CPCP
TPS: "NO" (TPS MUST NOT BE APPLIED)
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631CB
631EB 632CB 632EB 633CB 633EB
Skills :
AF 1 0.90 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572600/6
AMT 572600-220-001
MRB 572654-01-2
NTM 57-26-54
T 60 000 FH
T 48 000 CY
I 22 900 FH
I 16 400 CY
ALL 572654-01-2 OUTER WING PYLON FWD ATTACH FITTING 521 SDI
621
Y
SPECIAL DETAILED INSPECTION (US AND EC) OF OUTER
WING, PYLON FORWARD ATTACHMENT FITTINGS
SHACKLES;
SLEEVES;
ENGINE REMOVED;
NOTE : SAMPLING 20%
Access panels :
521BT 621BT
Skills :
NDT 1 1.00 MHrs
AMM 572600/6
AMT 572600-200-002
MRB 572656-01-1
T 12 YE
I 12 YE
ALL 572656-01-1 OUTER WING PYLON SPIGOT 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING, PYLON SPIGOT
FITTING
PREP. : BALL JOINT REMOVED
PYLON FAIRINGS REMOVED
SLEEVE REMOVED
NOTE 3: CPCP
Skills :
AF 1 2.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 572600/6
AMT 572600-200-003
MRB 572657-01-1
T 12 YE
I 12 YE
ALL 572657-01-1 OUTER WING PYLON AFT FITTING LUG 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING, AFT PYLON
ATTACHMENT FITTING LUG
PREP: PYLON FAIRINGS REMOVED
NOTE: 100% THRESHOLD = 24YE
NOTE: SAMPLING 20%
Skills :
AF 1 0.02 MHrs
AMM 572600/6
AMT 572600-200-009
MRB 572658-01-2
T 12 YE
I 12 YE
ALL 572658-01-2 OUTER WING BOTTOM SKIN TRACK BEAM FTG 531 DI
532
533
631
632
633
Y
SKIN LOWER SURFACE FORWARD ATTACHMENT FITTING
FOR FLAP TRACK BEAMS 2, 3 & 4
Access panels :
531CB 531EB 532CB 532EB 533CB 533EB 631CB
631EB 632CB 632EB 633CB 633EB
Skills :
AF 1 0.90 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 573000/6
AMT 573000-200-001
MRB 573101-01-2
T 60 000 FH
T 48 000 CY
I 17 200 FH
I 12 300 CY
ALL 573101-01-2 WING TIP BOTTOM SKIN LWR SURFACE JOINT 534 DI
634
Y
DETAILED INSPECTION OF WING TIP BOTTOM
SKIN LOWER SURFACE JOINT OUTBOARD OF RIB 27
NOTE : SAMPLING 20%
Skills :
AF 1 0.40 MHrs
AMM 574100/6
AMT 574100-200-012
MRB 574101-01-2
T 52 500 FH
T 30 000 CY
T 12 YE
I 32 000 FH
I 23 000 CY
I 6 YE
ALL 574101-01-2 FIXED LE ROLLER PIN HOLES 521 DI
522
621
622
Y
DETAILED INSPECTION OF OUTER WING, FIXED LEADING
EDGE, ROLLER PIN HOLES AND OTHER CUTOUTS IN TRACK RIB
1 TO 12
NOTE 3 : CPCP
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
Skills :
AF 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-013
MRB 574102-01-2
NTM 57-41-02
T 60 000 FH
T 48 000 CY
I 18 000 FH
I 12 900 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
574102-01-2 FIXED LE FWD UPR ROLLER PIN HOLES 522 SDI
622
Y R
FIXED LEADING EDGE, FORWARD UPPER ROLLER PIN HOLES IN
TRACK RIBS 5,6,7,8,9,10,11 AND 12.
PREP.: SLATS AND SLAT TRACKS REMOVED
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
522AB 522CB 522FB 522KB 522LB 522NB 522QB
522SB 522UB 622AB 622CB 622FB 622KB 622LB
622NB 622QB 622SB 622UB
Skills :
NDT 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-013
MRB 574102-01-3
NTM 57-41-02
T 60 000 FH
T 48 000 CY
I 13 800 FH
I 9 900 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
574102-01-3 FIXED LE FWD UPR ROLLER PIN HOLES 522 SDI
622
Y R
FIXED LEADING EDGE, FORWARD UPPER ROLLER PIN HOLES IN
TRACK RIBS 5,6,7,8,9,10,11 AND 12.
PREP.: SLATS AND SLAT TRACKS REMOVED
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
522AB 522CB 522FB 522KB 522LB 522NB 522QB
522SB 522UB 622AB 622CB 622FB 622KB 622LB
622NB 622QB 622SB 622UB
Skills :
NDT 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-014
MRB 574106-01-2
T 60 000 FH
T 48 000 CY
T 12 YE
I 55 900 FH
I 39 300 CY
I 6 YE
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
574106-01-2 FIXED LE BOTTOM ATTACH JOINT 521 DI
522
621
622
Y R
EDGE, BOTTOM ATTACHMENT JOINT ON TRACK RIB 1 TO 12
NOTE 3 : CPCP
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-014
MRB 574106-01-4
T 60 000 FH
T 48 000 CY
T 12 YE
I 55 900 FH
I 39 300 CY
I 6 YE
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
5469
5709
5994
574106-01-4 FIXED LE BOTTOM ATTACH JOINT 521 DI
522
621
622
Y R
EDGE, BOTTOM ATTACHMENT JOINT ON TRACK RIB 1 TO 12
NOTE 3 : CPCP
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
AMM 574100/6
AMT 574100-200-015
MRB 574112-01-1
T 12 YE
I 6 YE
ALL 574112-01-1 FIXED LE MAIN BOTTOM WING SKIN 521 DI
522
621
622
Y
EDGE, BOTTOM WING SKIN, UPPER AND LOWER SURFACES,
FORWARD OF FRONT SPAR, FROM RIB 1 TO RIB 27,
INCLUDING SIGHTING ROD HOLES IN RIB BAY 8-9 AND RIB
BAY 26-27, LIFTING BEAM HOLES AND DRAIN HOLES
NOTE 3 : CPCP
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-016
MRB 574113-01-1
T 12 YE
I 6 YE
ALL 574113-01-1 FIXED LE TOP WING SKIN 521 DI
522
621
622
Y
DETAILED INSPECTION OF OUTER WING, FIXED LEADING EDGE
TOP WING SKIN, UPPER AND LOWER SURFACES, FORWARD OF
FRONT SPAR, FROM RIB 1 TO RIB 27
NOTE 3 : CPCP
Access panels :
521AB 521CB 521EB 522AB 522CB 522FB 522KB
522LB 522NB 522QB 522SB 522UB 621AB 621CB
621EB 622AB 622CB 622FB 622KB 622LB 622NB
622QB 622SB 622UB
Skills :
AF 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-017
MRB 574114-01-2
NTM 57-41-14
T 60 000 FH
T 48 000 CY
I 17 800 FH
I 12 800 CY
ALL 574114-01-2 FIXED LE PINION FITTING 521 SDI
522
621
622
Y
FIXED LEADING EDGE PINION FITTING BOLTING AND
ACTUATOR BOLTING LOWER BOLT HOLES ON RIB
2,3,5,6,7,8,9,10,11 AND 12
NOTE : SAMPLING 20%
Access panels :
521CB 521EB 522AB 522CB 522FB 522KB 522LB
522NB 522QB 522SB 522UB 621CB 621EB 622AB
622CB 622FB 622KB 622LB 622NB 622QB 622SB
622UB
Skills :
NDT 1 2.00 MHrs
AMM 574100/6
AMT 574100-200-002
MRB 574201-01-1
T 6 YE
I 6 YE
ALL 574201-01-1 SLAT 1, TRACKS 1-4 500 DI
600
Y
DETAILED INSPECTION OF SLAT 1, TRACKS 1 TO 4 :
VISIBLE PART OF ROLLER CONTACT AREA WHEN SLAT IS
FULLY EXTENDED, LH/RH
PREP. : SLATS EXTENDED
NOTE 3: CPCP
Skills :
AF 1 0.12 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574200/6
AMT 574200-200-001
MRB 574202-01-1
T 12 YE
I 6 YE
2255
2261
574202-01-1 SLAT 1 TRACKS 1-4 ATTACHMENTS 500 DI
600
Y
DETAILED INSPECTION OF SLAT 1, TRACKS 1 TO 4
ATTACHMENTS, INCLUDING TRACK RIB LUGS, TRACK LUGS,
BOLTS, LINKS AND SIDE PLATES, LH/RH
PREP: BOLTS SUCCESSIVELY REMOVED
SLATS EXTENDED
NOTE: CPCP
Skills :
AF 1 0.42 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 574200-200-001
MRB 574202-01-2
T 12 YE
I 6 YE
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
574202-01-2 SLAT 1 TRACKS 1-4 ATTACHMENTS 500 DI
600
Y
DETAILED INSPECTION OF SLAT 1, TRACKS 1 TO 4
PREP: SLATS FULLY EXTENDED;
NOTE: CPCP
Skills :
AF 1 0.44 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574200/6
AMT 574200-200-004
MRB 574204-01-1
T 78 000 FH
T 39 000 CY
T 12 YE
I 32 000 FH
I 16 000 CY
I 12 YE
ALL 574204-01-1 SLAT 1 SKIN CONNECTIONS 500 DI
600
Y
DETAILED INSPECTION OF SLAT 1, SKIN CONNECTIONS IN
AREA OF LOWER GIRDER AT TRACK RIB STATIONS, LH/RH.
NOTE 1: DET INSPECTION IS OF EXTERNAL STRUCTURE OF
SLAT 1.
NOTE 4: CPCP
Skills :
AF 1 0.12 MHrs
AMM 574200/6
AMT 574200-200-005
MRB 574204-02-1
NTM 57-42-04
T 12 YE
I 12 YE
ALL 574204-02-1 SLAT 1 SKIN CONNECTIONS 500 SDI
600
Y
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF SLAT 1,
SKIN CONNECTIONS IN AREA OF LOWER GIRDER AT TRACK RIB
STATIONS, LH/RH.
NOTE 1: SDET INSPECTION IS OF INTERNAL STRUCTURE OF
SLAT 1 (ENDOSCOPE).
NOTE 4: CPCP
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 574200-280-801
NTM 57-42-04
T 78 000 FH
T 39 000 CY
I 32 000 FH
I 16 000 CY
ALL 574204-03-1 SLAT 1 500 SDI
600
N
SPECIAL DETAILED INSPECTION (HFEC) OF SLAT 1, SKIN
CONNECTIONS IN AREA OF LOWER GIRDER AT TRACK RIB
STATIONS 3 AND 4, LH/RH
NOTE 1: SDET INSPECTION IS OF EXTERNAL STRUCTURE OF
SLAT 1
PREP.: SLAT FULLY EXTENDED;
AMM 574200/6
AMT 574200-200-006
MRB 574205-01-1
T 12 YE
I 6 YE
ALL 574205-01-1 SLAT 1 TRAILING EDGE 500 DI
600
Y
DETAILED INSPECTION OF SLAT 1, TRAILING EDGE, LOWER
FACE, LH/RH
NOTE : CPCP
Skills :
AF 1 1.00 MHrs
AMM 574100/6
AMT 574100-200-008
MRB 574301-01-1
T 6 YE
I 6 YE
ALL 574301-01-1 SLAT 2 TRACK 5-6 ROLLER CONTACT AREA 500 DI
600
Y
DETAILED INSPECTION OF SLAT 2, TRACKS 5 AND 6 :
NOTE 3 : CPCP
Skills :
AF 1 0.06 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574300/6
AMT 574300-200-008
MRB 574302-01-1
T 12 YE
I 6 YE
2255
2261
574302-01-1 SLAT 2 TRACK 5-6 ATTACHMENTS 500 DI
600
Y
DETAILED INSPECTION OF SLAT 2, TRACKS 5 AND 6
PREP: BOLTS SUCCESSIVELY REMOVED
SLATS EXTENDED
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574300/6
AMT 574300-200-008
MRB 574302-01-2
T 12 YE
I 6 YE
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
600
Y
PREP: SLATS FULLY EXTENDED
NOTE: CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574300/6
AMT 574300-200-002
MRB 574304-01-1
T 12 YE
I 12 YE
600
Y
AREA OF LOWER GIRDER AT TRACK RIB STATIONS, LH/RH
SLAT 2.
NOTE 4: CPCP
Skills :
AF 1 0.06 MHrs
AMM 574300/6
AMT 574300-200-003
MRB 574304-02-2
NTM 57-43-04
T 12 YE
I 12 YE
600
Y
STATIONS, LH/RH.
SLAT 2.
PREP. : SLAT FULLY EXTENDED
NOTE 4: CPCP
Skills :
NDT 1 0.82 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 574300-280-801
NTM 57-43-04
T 78 000 FH
T 39 000 CY
I 32 000 FH
I 16 000 CY
600
N
SPECIAL DETAILED INSPECTION (LFEC) OF SLAT 2, SKIN
STATIONS, LH/RH.
NOTE: SDET INSPECTION IS OF EXTERNAL STRUCTURE OF
SLAT 2.
PREP.: SLATS FULLY EXTENDED;
NOTE: SAMPLING 20%
Skills :
NDT 1 0.80 MHrs
AMM 574300/6
AMT 574300-200-001
MRB 574305-01-1
T 12 YE
I 6 YE
600
Y
FACE, LH/RH
PREP.: SLATS EXTENDED
NOTE : CPCP
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574100/6
AMT 574100-200-009
MRB 574401-01-1
T 6 YE
I 6 YE
600
Y
NOTE 3 : CPCP
Skills :
AF 1 0.06 MHrs
AMM 574400/6
AMT 574400-200-010
MRB 574402-01-1
T 12 YE
I 6 YE
2255
2261
600
Y
PREP. : BOLTS SUCCESSIVELY REMOVED
SLATS EXTENDED
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574400/6
AMT 574400-200-010
MRB 574402-01-2
T 12 YE
I 6 YE
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
600
Y
NOTE: CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574400/6
AMT 574400-200-007
MRB 574404-01-1
NTM 57440
T 78 000 FH
T 39 000 CY
T 12 YE
I 32 000 FH
I 16 000 CY
I 12 YE
600
Y
DETAILED INSPECTION OF SLAT 3, SKIN
STATIONS, LH/RH
SLAT 3.
NOTE 4: CPCP
Skills :
AF 1 0.06 MHrs
AMM 574400/6
AMT 574400-200-007
MRB 574404-02-1
NTM 57-44-04
T 12 YE
I 12 YE
600
Y
STATIONS, LH/RH.
SLAT 3.
NOTE 4: CPCP
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574400/6
AMT 574400-200-009
MRB 574405-01-1
T 12 YE
I 6 YE
600
Y
FACE, LH/RH
NOTE : CPCP
Skills :
AF 1 1.00 MHrs
AMM 574100/6
AMT 574100-200-010
MRB 574501-01-1
T 6 YE
I 6 YE
600
Y
NOTE : CPCP
Skills :
AF 1 0.06 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574500/6
AMT 574500-200-008
MRB 574502-01-1
T 12 YE
I 6 YE
2255
2261
600
Y
ATTACHMENTS INCLUDING TRACK RIB LUGS, TRACK LUGS,
PREP.: BOLTS SUCCESSIVELY REMOVED
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574500/6
AMT 574500-200-008
MRB 574502-01-2
T 12 YE
I 6 YE
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
600
Y
NOTE: CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574500/6
AMT 574500-200-005
MRB 574504-01-1
NTM 574504
T 78 000 FH
T 39 000 CY
T 12 YE
I 32 000 FH
I 16 000 CY
I 12 YE
600
Y
DETAILED INSPECTION OF SLAT 4, SKIN
STATIONS, LH/RH
SLAT 4.
NOTE 4: CPCP
Skills :
AF 1 0.06 MHrs
AMM 574500/6
AMT 574500-200-006
MRB 574504-02-1
NTM 57-45-04
T 12 YE
I 12 YE
600
Y
STATIONS, LH/RH.
SLAT 4.
NOTE 4: CPCP
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574500/6
AMT 574500-200-007
MRB 574505-01-1
T 12 YE
I 6 YE
600
Y
FACE, LH/RH
NOTE : CPCP
Skills :
AF 1 1.00 MHrs
AMM 574100/6
AMT 574100-200-011
MRB 574601-01-1
T 6 YE
I 6 YE
600
Y
NOTE 3 : CPCP
Skills :
AF 1 0.06 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574600/6
AMT 574600-200-008
MRB 574602-01-1
T 12 YE
I 6 YE
2255
2261
600
Y
PREP. BOLTS SUCCESSIVELY REMOVED
SLATS EXTENDED
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574600/6
AMT 574600-200-008
MRB 574602-01-2
T 12 YE
I 6 YE
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
600
Y
NOTE: CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574600/6
AMT 574600-200-005
MRB 574604-01-1
T 78 000 FH
T 39 000 CY
T 12 YE
I 32 000 FH
I 16 000 CY
I 12 YE
600
Y
AREA OF LOWER GIRDER AT TRACK RIB STATIONS, LH/RH
SLAT 5.
NOTE 4: CPCP
Skills :
AF 1 0.06 MHrs
AMM 574600/6
AMT 574600-200-006
MRB 574604-02-1
NTM 57-46-04
T 12 YE
I 12 YE
600
Y
STATIONS, LH/RH.
SLAT 5.
NOTE 4: CPCP
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 574600/6
AMT 574600-200-007
MRB 574605-01-1
T 12 YE
I 6 YE
600
Y
FACE LH/RH
NOTE 2 : CPCP
Skills :
AF 1 1.00 MHrs
AMM 575100/6
AMT 575100-220-004
MRB 575101-01-1
T 12 YE
I 12 YE
ALL 575101-01-1 TRAILING EDGE FLAP ACTUATOR BRACKETS 531 DI
532
533
631
632
633
Y
DETAILED VISUAL INSPECTION OF OUTER WING
TRAILING EDGE FLAP ACTUATOR BRACKETS AT FLAP
TRACKS 2, 3 AND 4
NOTE : CPCP
Access panels :
531CB 532CB 533CB 631CB 632CB 633CB
Skills :
AF 1 1.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-220-005
MRB 575101-02-2
NTM 57-51-01
T 48 000 CY
I 16 400 CY
ALL 575101-02-2 TRAILING EDGE FLAP ACTUATOR BRACKETS 531 SDI
532
533
631
632
633
Y
SPECIAL DETAILED INSPECTION (US) OF OUTER WING,
TRAILING EDGE FLAP ACTUATOR BRACKETS AT FLAP
TRACKS 2, 3 AND 4
NOTE : SAMPLING 20%
Access panels :
531CB 532CB 533CB 631CB 632CB 633CB
Skills :
NDT 1 3.00 MHrs
AMT 575100-220-006
MRB 575104-01-1
T 48 000 CY
T 12 YE
I 15 000 CY
I 12 YE
ALL 575104-01-1 TRAILING EDGE SPOILER 1 HINGE FITTINGS 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING, TRAILING EDGE,
SPOILER 1 ACTUATOR AND HINGE FITTINGS
PREP.: FLAPS EXTENDED;
SPOILERS EXTENDED;
NOTE : CPCP
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-210-001
MRB 575106-01-3
T 48 000 CY
I 12 300 CY
ALL 575106-01-3 TRAILING EDGE SPOILERS HINGE PINS NT DI Y
SPOILERS 1,2,3,4 AND 5 HINGE PINS
PREP.: PINS REMOVED
NOTE : THIS TASK IS AN ALTERNATIVE TO TASK 575106-02-3
NOTE : SAMPLING 20%
NOTE : WORKING ZONES 574 ,575 ,582 ,583 ,584 ,585 ,586
674 ,675 ,682 ,683 ,684 ,685 ,686
Access panels :
573BB 575BB 575DB 575EB 575GB 673BB 675BB
675DB 675EB 675GB
Skills :
AF 1 0.31 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-220-015
MRB 575106-02-3
NTM 575106
T 48 000 CY
I 16 400 CY
ALL 575106-02-3 TRAILING EDGE SPOILERS HINGE PINS NT SDI Y
SPECIAL DETAILED INSPECTION (MPI) OF OUTER WING,
TRAILING EDGE, SPOILERS 1,2,3,4,AND 5 HINGE PINS
PREP. : PINS REMOVED
NOTE 4: WORKING ZONES: 574, 575, 582, 583, 584, 585, 586
674, 675, 682, 683, 684, 685, 686
Access panels :
573BB 575BB 575DB 575EB 575GB 673BB 675BB
675DB 675EB 675GB
Skills :
NDT 1 1.00 MHrs
AMM 575100/6
AMT 575100-210-002
MRB 575106-03-1
T 12 YE
I 12 YE
ALL 575106-03-1 TRAILING EDGE SPOILERS HINGE PINS NT SDI Y
DETAILED INSPECTION OF OUTER WING TRAILING EDGE
SPOILERS 1,2,3,4 AND 5 HINGE PINS
NOTE 1: WORKING ZONES: 574, 575, 582, 583, 584, 585, 586
674, 675, 682, 683, 684, 685, 686
NOTE 2: CPCP
Access panels :
573BB 575BB 575DB 575EB 575GB 673BB 675BB
675DB 675EB 675GB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-220-009
MRB 575107-01-1
T 12 YE
I 6 YE
ALL 575107-01-1 TRAILING EDGE SPOILER 2-5 FITTINGS NT DI Y
SPOILERS 2,3,4 AND 5 ACTUATOR AND HINGE FITTINGS
SPOILER EXTENSION
NOTE : WORKING WITH ZONE : 575, 583, 584, 585, 586
675, 683, 684, 685, 686
Skills :
AF 1 1.20 MHrs
AMM 575100/6
AMT 575100-220-010
MRB 575107-02-2
NTM 57-51-07
T 48 000 CY
I 12 300 CY
ALL 575107-02-2 TRAILING EDGE SPOILER 2-5 FITTINGS NT SDI Y
TRAILING EDGE, SPOILERS 2,3,4 AND 5 ACTUATOR AND
HINGE FITTINGS
NOTE 2 : WORKING WITH ZONE : 575, 583, 584, 585, 586
675, 683, 684, 685, 686
PREP . : FLAPS EXTENDED;
SPOILERS EXTENDED;
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-220-001
MRB 575119-01-2
T 30 500 CY
T 12 YE
I 16 500 CY
I 12 YE
ALL 575119-01-2 TRAILING EDGE AILERON HINGE FITTINGS 575 DI
590
675
690
Y
AILERON HINGE FITTINGS 1 TO 5 AND "A" FRAMES
NOTE 3 : CPCP
Access panels :
575AT 575JB 575KB 575LB 575MB 675AT 675JB
675KB 675LB 675MB
Skills :
AF 1 0.52 MHrs
AMM 575100/6
AMT 575100-220-002
MRB 575120-01-3
T 48 000 CY
I 12 300 CY
ALL 575120-01-3 TRAILING EDGE AILERON HINGE PINS 575 DI
590
675
690
Y
AILERON HINGE PINS 1 TO 5
Access panels :
575AT 575JB 575KB 575LB 575MB 675AT 675JB
675KB 675LB 675MB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-220-013
MRB 575120-02-2
NTM 57-51-20
T 48 000 CY
I 16 400 CY
ALL 575120-02-2 TRAILING EDGE AILERON HINGE PINS 575 SDI
590
675
690
Y
TRAILING EDGE, AILERON HINGE PINS 1 TO 5
Access panels :
575AT 575JB 575KB 575LB 575MB 675AT 675JB
675KB 675LB 675MB
Skills :
NDT 1 2.00 MHrs
AMM 575100/6
AMT 575100-220-016
MRB 575120-03-1
T 12 YE
I 90 MO
ALL 575120-03-1 TRAILING EDGE AILERON HINGE PINS 575 DI
590
675
690
Y
AILERON HINGE PINS 1 TO 5
PREP.: PINS REMOVED
NOTE : CPCP
Access panels :
575AT 575JB 575KB 575LB 575MB 675AT 675JB
675KB 675LB 675MB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-220-003
MRB 575121-01-2
T 30 000 CY
T 6 YE
I 25 000 CY
I 6 YE
ALL 575121-01-2 TRAILING EDGE AILERON ACTUATOR FITTING 575 DI
590
675
690
Y
AILERON, INBOARD AND OUTBOARD ACTUATOR FITTINGS
NOTE 3: CPCP
Access panels :
575KB 575LB 675KB 675LB
Skills :
AF 1 0.04 MHrs
AMM 575100/6
AMT 575100-200-003
MRB 575140-01-1
T 30 000 CY
T 12 YE
I 15 000 CY
I 12 YE
ALL 575140-01-1 FLAP TRACK 1 147 DI
148
Y
DETAILED INSPECTION OF FLAP TRACK 1, INCLUDING
ATTACHMENT BRACKETS TO FUSELAGE, STRUT, CARRIAGE AND
SWINGING LINK (PENDULUM), LH/RH
NOTE 3: CPCP
Access panels :
191ET 192ET 193AT 194AT 734 744
Skills :
AF 1 3.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-200-004
MRB 575142-01-1
T 24 000 CY
T 10 YE
I 15 000 CY
I 10 YE
ALL 575142-01-1 INBOARD FLAP ACTUATOR DRIVE ARM 147 DI
148
Y
DETAILED INSPECTION OF INBOARD FLAP, INBOARD ACTUATOR
DRIVE ARM, DRIVE STRUT AND OUTER PART OF TRUNNION, LH/RH
NOTE 3: CPCP
Access panels :
734 744
Skills :
AF 1 3.60 MHrs
AMM 575100/6
AMT 575100-200-005
MRB 575150-01-2
T 12 YE
I 6 YE
ALL 575150-01-2 OUTER WING MLG SUPPORT RIBS 571 DI
671
Y
DETAILED INSPECTION OF OUTER WING, MLG SUPPORT RIB 5,
OUTBOARD AND INBOARD FACES
NOTE : CPCP
Access panels :
574AB 674AB
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-200-006
MRB 575151-01-3
T 46 700 FH
T 30 000 CY
I 9 200 FH
I 5 900 CY
ALL 575151-01-3 TRAILING EDGE FALSE REAR SPAR 573 DI
574
673
674
Y
DETAILED INSPECTION OF OUTER WING, TRAILING EDGE
FALSE REAR SPAR, FORWARD AND AFT FACES
NOTE : SAMPLING 20%
Access panels :
573AB 573BB 573CB 574AB 574BB 673AB 673BB
673CB 674AB 674BB
Skills :
AF 1 1.52 MHrs
AMM 575100/6
AMT 575100-200-010
MRB 575166-01-3
T 60 000 FH
T 48 000 CY
I 10 000 FH
I 5 900 CY
ALL 575166-01-3 OUTER WING FALSE REAR SPAR LWR FLANGE 574 DI
674
Y
DETAILED INSPECTION OF OUTER WING, FALSE REAR SPAR,
FORWARD FACE, LOWER FLANGE, BETWEEN RIB 7 AND RIB 9
NOTE : SAMPLING 20%
Access panels :
573BB 573CB 573DB 573EB 673BB 673CB 673DB
673EB
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575100/6
AMT 575100-200-011
MRB 575167-01-1
T 6 YE
I 6 YE
ALL 575167-01-1 OUTER WING BOTTOM SKIN UPPER SURFACE 574 DI
674
Y
DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN PANEL
NO. 3, UPPER SURFACE, BETWEEN REAR SPAR AND FALSE
REAR SPAR, AND BETWEEN GEAR SUPPORT RIB 5 AND RIB 8.
NOTE: CPCP
Access panels :
574AB 574BB 674AB 674BB
Skills :
AF 1 0.20 MHrs
AD 2012-0032
ISB 57-1168
I 500 CY
ALL 575171-01-4 MAIN LANDING GEAR SUPPORT RIB 5 LUGS 730 DI
740
Y
MAIN LANDING GEAR SUPPORT RIB 5 LUGS
DETAILED INSPECTION OF MAIN LANDING GEAR SUPPORT
RIB 5 LUGS.
NOTE 1: FOR THRESHOLD REFER TO ISB 57-1168.
NOTE 2: RII TASK
Access panels :
734 744
Skills :
AF 1 2.50 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AD 2008-05-12
AMM 575200/6
AMT 575200-210-010
EAD 2010-0209
ISB 57-1133
I 4 000 FH
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
575221-02-1 FLAPS 581 DI
681
Y
DETAILED INSPECTION OF INBOARD FLAP TRUNNION AND
SLIDING PANEL
NOTE : CREDIT CAN BE TAKEN FROM LAST ACCOMPLISHMENT
OF SB 57-1133
Access panels :
193AB 193BB 194AB 194BB 195AB 195BB 734
744
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMM 575200/6
AMT 575200-210-001
MRB 575223-01-1
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575223-01-1 INBOARD DOUBLE SLOTTED FLAP TRUNNION 581 DI
681
Y
DETAILED INSPECTION OF INBOARD DOUBLE-SLOTTED FLAP,
TRUNNION ATTACHMENT BRACKET, INCLUDING INBOARD
TRUNNION, LH/RH
NOTE 1: THIS TASK HAS TO BE PERFORMED THE SAME TIME AS
TASK 575223-02-1.
PREP. : RUBBER SEALS
FLAP EXTENSION
NOTE 3: CPCP
Access panels :
581AT 681AT
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-220-009
MRB 575223-02-1
NTM 57-52-23
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575223-02-1 INBOARD DOUBLE SLOTTED FLAP TRUNNION 581 SDI
681
Y
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF INBOARD
DOUBLE-SLOTTED FLAP, TRUNNION ATTACHMENT BRACKET,
INCLUDING INBOARD TRUNNION, LH/RH
NOTE 1: INSPECTION IS THROUGH INSPECTION HOLES
THIS TASK HAS TO BE PERFORMED THE SAME TIME AS TASK
575223-01-1.
PREP. : COVER TAPES FROM INSPECTION HOLES REMOVED
FLAP EXTENSION
NOTE 3: CPCP
Access panels :
581AT 681AT
Skills :
AF 1 0.59 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-210-002
MRB 575225-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575225-01-1 INBOARD DOUBLE SLOTTED FLAP DRIVE 531 DI
581
631
681
Y
DRIVE STRUT FOR FLAP AND DRIVE LEVER FOR FLAP TRACK
FAIRING, INCLUDING ATTACHMENT BRACKETS TO THE FLAP AT
TRACK 2, LH/RH
NOTE 2: CPCP
Access panels :
531AT 531CB 631AT 631CB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-220-010
MRB 575226-01-1
NTM 57-52-26
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575226-01-1 INBD DOUBLE SLOTTED FLAP INTL BRACK 581 SDI
681
Y
DOUBLE-SLOTTED FLAP, INTERNAL BRACKETS AT TRACK 2,
LH/RH
FLAPS EXTENDED;
NOTE 2: 100% THRESHOLD = 24 YE
NOTE 4: CPCP
Access panels :
531AT 531CB 581AB 631AT 631CB 681AB
Skills :
AF 1 0.59 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-210-003
MRB 575227-01-1
T 32 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575227-01-1 INBD DOUBLE SLOTTED FLAP FLAP/CARRIAGE 531 DI
581
631
681
Y
FLAP TO CARRIAGE ATTACHMENT BRACKET AT TRACK 2, LH/RH
FLAP EXTENSION
NOTE 3: CPCP
Access panels :
531AT 531CB 631AT 631CB
Skills :
AF 1 0.80 MHrs
AMM 575200/6
AMT 575200-210-004
MRB 575229-01-1
T 32 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575229-01-1 INBD DOUBLE SLOTTED FLAP PYLON FAIR AT 477 DI
487
581
681
Y
ATTACHMENT BRACKET OF PYLON AFT FAIRING, INCLUDING
SURROUNDING SKIN, LH/RH
NOTE 3: CPCP
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-220-011
MRB 575230-01-1
NTM 57-52-30
T 32 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575230-01-1 INBD DOUBLE SLOTTED FLP INT SUPP BRACK 581 SDI
681
Y
SPECIAL DETAILED INSPECTION (ENDOSCOPE) INBOARD
DOUBLE-SLOTTED FLAP, INTERNAL SUPPORT BRACKETS PYLON
AFT FAIRING ATTACHMENT, LH/RH
FLAP EXTENSION
NOTE 4: CPCP
Skills :
NDT 1 1.19 MHrs
AMM 575200/6
AMT 575200-210-005
MRB 575231-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575231-01-1 INBOARD DOUBLE SLOTTED FLAP END RIB 581 DI
681
Y
END RIB, INCLUDING INTERCONNECTION STRUT ATTACHMENT
BRACKET AND LEVER, LH/RH
FLAP EXTENSION
NOTE 3 : CPCP
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-210-006
MRB 575233-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575233-01-1 INBOARD DOUBLE SLOTTED FLAP TAB DRIVE 535 DI
572
635
672
Y
TAB DRIVE ASSEMBLY AND ARTICULATION AT RIB 3, LH/RH
NOTE 3 : CPCP
Access panels :
535AB 535BB 635AB 635BB
Skills :
AF 1 0.80 MHrs
AMM 575200/6
AMT 575200-210-007
MRB 575235-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575235-01-1 INBOARD DOUBLE SLOTTED FLAP TAB ARTIC 535 DI
635
Y
TAB ARTICULATION AT RIB 6, LH/RH
NOTE 3: CPCP
Access panels :
535AB 535BB 635AB 635BB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-210-008
MRB 575237-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575237-01-1 INBOARD DOUBLE SLOTTED FLAP TAB DRIBE 531 DI
631
Y
TAB DRIVE STRUT AND ARTICULATION AT RIB 9, LH/RH
NOTE 3 : CPCP
Access panels :
531AT 531CB 631AT 631CB
Skills :
AF 1 0.40 MHrs
AMM 575200/6
AMT 575200-220-012
MRB 575239-01-1
NTM 57-52-39
T 48 000 CY
T 10 YE
I 20 000 CY
I 10 YE
ALL 575239-01-1 INBOARD DOUBLE SLOTTED FLAP RIB 3 581 SDI
681
Y
DOUBLE-SLOTTED FLAP, RIB 3, LH/RH
FLAP EXTENSION
NOTE 4: CPCP
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-220-013
MRB 575241-01-1
NTM 57-52-41
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575241-01-1 INBOARD DOUBLE SLOTTED FLAP RIB 6 581 SDI
681
Y
DOUBLE-SLOTTED FLAP, RIB 6, LH/RH
FLAP EXTENSION
NOTE 4: CPCP
Skills :
NDT 1 1.00 MHrs
AMM 575200/6
AMT 575200-200-005
MRB 575250-01-1
T 24 YE
I 12 YE
ALL 575250-01-1 INBOARD FLAP TRACK 2 CARRIAGE 500 DI
600
Y
DETAILED INSPECTION OF OUTER WING, INBOARD FLAP TRACK
2 CARRIAGE FORGING
NOTE 3: CPCP
Skills :
AF 1 0.10 MHrs
AMM 575200/6
AMT 575200-220-004
MRB 575250-02-2
NTM 57-52-50
T 48 000 CY
I 16 400 CY
ALL 575250-02-2 INBOARD FLAP TRACK 2 CARRIAGE 500 SDI
600
Y
SPECIAL DETAILED INSPECTION (U/S) OF OUTER WING,
INBOARD FLAP TRACK 2 CARRIAGE FORGING
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-200-001
MRB 575251-01-2
T 36 000 CY
I 7 000 CY
ALL 575251-01-2 INBOARD FLAP TRACK 2 ROLLERS 500 DI
600
Y
2 CARRIAGE ROLLERS
NOTE : SAMPLING 20%
Skills :
AF 1 0.20 MHrs
AMM 575200/6
AMT 575200-220-007
MRB 575252-01-2
NTM 57-52-52
T 48 000 CY
I 12 300 CY
ALL 575252-01-2 INBOARD FLAP TRACK 2 BOLT ASSEMBLY 531 SDI
631
Y
INBOARD FLAP TRACK 2 FLAP PIVOT BOLT ASSEMBLY
PREP.: INNER BOLT REMOVED
FLAP EXTENSION
NOTE : SAMPLING 20%
Skills :
NDT 1 2.00 MHrs
AMM 575200/6
AMT 575200-200-006
MRB 575254-01-1
T 6 YE
I 6 YE
ALL 575254-01-1 INBOARD FLAP TRACK 2 DRIVE LEVER 531 DI
631
Y
2, DRIVE LEVER
SPOILER EXTENSION
NOTE 3: CPCP
Skills :
AF 1 0.02 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575200/6
AMT 575200-220-005
MRB 575254-02-2
NTM 57-52-54
T 48 000 CY
I 12 700 CY
ALL 575254-02-2 INBOARD FLAP TRACK 2 DRIVE LEVER 531 SDI
631
Y
INBOARD FLAP TRACK 2, DRIVE LEVER
SPOILER EXTENSION
NOTE : SAMPLING 20%
Skills :
NDT 1 1.00 MHrs
AMM 575300/6
AMT 575300-220-021
MRB 575323-01-1
NTM 57-53-23
T 30 000 CY
T 12 YE
I 15 000 CY
I 12 YE
ALL 575323-01-1 OUTBOARD DOUBLE SLOTTED FLAP TAB 587 SDI
687
Y
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF OUTBOARD
DOUBLE SLOTTED FLAP TAB FRONT SPAR, LH/RH
FLAP EXTENSION
NOTE 4: CPCP
Skills :
NDT 1 1.39 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-001
MRB 575327-01-1
T 30 000 CY
T 12 YE
I 17 100 CY
I 12 YE
ALL 575327-01-1 OUTBD DOUBLE SLOTTED FLAP INBOARD RIB 587 DI
687
Y
DETAILED INSPECTION OF OUTBOARD DOUBLE-SLOTTED FLAP,
INBOARD RIB, INCLUDING INTERCONNECTION STRUT
ATTACHMENT BRACKET, LEVER AND ROLLER, INTERNAL AND
EXTERNAL, LH/RH
TASK 575327-02-1.
FLAP EXTENSION
NOTE 4: CPCP
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-014
MRB 575327-02-1
NTM 57-53-27
T 30 000 CY
T 12 YE
I 17 100 CY
I 12 YE
ALL 575327-02-1 OUTBD DOUBLE SLOTTED FLAP INBOARD RIB 587 SDI
687
Y
DOUBLE-SLOTTED FLAP, INBOARD RIB, INCLUDING
INTERCONNECTION STRUT ATTACHMENT BRACKET, LEVER AND
ROLLER, INTERNAL AND EXTERNAL, LH/RH
NOTE 1: INSPECTION IS THROUGH INSPECTION HOLES.
THIS TASK HAS TO BE PERFORMED THE SAME TIME
AS TASK 575327-01-1.
RUBBER SEALS
FLAP EXTENSION
NOTE 4: CPCP
Skills :
NDT 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-002
MRB 575329-01-1
T 30 000 CY
T 12 YE
I 17 900 CY
I 12 YE
2255
2261
2267
2303
2480
575329-01-1 OUTBD DOUBLE SLOTTED FLAP INTL SUPP 532 DI
587
632
687
Y
INTERNAL SUPPORT FITTING AT TRACK 3, INCLUDING
ATTACHMENT BRACKET, DRIVE BRACKET AND ATTACHMENT
STRUCTURE, INTERNAL AND EXTERNAL, LH/RH
TASK 575329-02-1.
NOTE 4: CPCP
Access panels :
532AT 532CB 587AB 632AT 632CB 687AB
Skills :
AF 1 0.99 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-015
MRB 575329-02-1
NTM 57-53-29
T 30 000 CY
T 12 YE
I 17 900 CY
I 12 YE
2255
2261
2267
2303
2480
575329-02-1 OUTBD DOUBLE SLOTTED FLAP INTL SUPP 533 SDI
587
633
687
Y
DOUBLE-SLOTTED FLAP, INTERNAL SUPPORT FITTING AT
TRACK 3 INCLUDING ATTACHMENT BRACKET, DRIVE BRACKET
AND ATTACHMENT STRUCTURE, INTERNAL AND EXTERNAL,
LH/RH
AS TASK 575329-01-1.
FLAP EXTENSION
NOTE 4: CPCP
Access panels :
532AT 532CB 587AB 632AT 632CB 687AB
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 575300-210-002
MRB 575329-03-1
T 30 000 CY
T 12 YE
I 17 900 CY
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
575329-03-1 OUTBD DOUBLE SLOTTED FLAP INTL SUPP 532 DI
587
632
687
Y R
INTERNAL SUPPORT FITTING AT TRACK 3 INCLUDING
ATTACHMENT BRACKET, DRIVE BRACKET AND ATTACHMENT
NOTE 1: THIS TASK HAS TO BE PERFORMED THE SAME TIME
AS TASK 575329-04-1
NOTE 4: CPCP
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
532AT 532CB 632AT 632CB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 575300-220-015
MRB 575329-04-1
NTM 57-53-29
T 30 000 CY
T 12 YE
I 17 900 CY
I 12 YE
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
575329-04-1 OUTBOARD DOUBLE-SLOTTED FLAP 532 SDI
587
632
687
Y
TRACK 3 INCLUDING ATTACHMENT BRACKET, DRIVE BRACKET
LH/RH
AS TASK 575329-03-1.
NOTE 4: CPCP
PREP. : COVER TAPES FROM INSPECTION HOLES REMOVED;
FLAPS EXTENDED;
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
5251
5275
5297
5306
5340
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
Access panels :
532AT 532CB
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-003
MRB 575331-01-1
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575331-01-1 OUTBD DOUBLE SLOTTED FLAP DRIVE LINK 532 DI
632
Y
DRIVE LINKAGE AND DRIVE FITTING AT TRACK 3, LH/RH
NOTE 3: CPCP
Access panels :
532AT 532CB 632AT 632CB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-004
MRB 575333-01-1
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575333-01-1 OUTBD DOUBLE SLOTTED FLAP INTL SUPP 533 DI
587
633
687
Y
INTERNAL SUPPORT FITTING AT TRACK 4, INCLUDING
PENDULUM SUPPORT, DRIVE BRACKET AND ATTACHMENT
TASK 575333-02-1.
NOTE 1: 100% THRESHOLD = 90MO
NOTE 3: CPCP
Access panels :
533AT 533CB 587BB 633AT 633CB 687BB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-016
MRB 575333-02-1
NTM 57-53-33
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575333-02-1 OUTBD DOUBLE SLOTTED FLAP INTL SUPP 533 SDI
587
633
687
Y
SPECIAL DETAILED INSPECTION (EN) OF OUTBOARD
TRACK 4, INCLUDING PENDULUM SUPPORT, DRIVE BRACKET
LH/RH
AS TASK 575333-01-1.
NOTE 3: 100% THRESHOLD = 90MO
NOTE 4: CPCP
FLAP EXTENSION
Access panels :
533AT 533CB 587BB 633AT 633CB 687BB
Skills :
NDT 1 2.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-005
MRB 575335-01-1
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575335-01-1 OUTBD DOUBLE SLOTTED FLAP DRIVE LINK 533 DI
633
Y
DRIVE LINKAGE AND DRIVE FITTING AT TRACK 4, LH/RH
NOTE 3: CPCP
Access panels :
533AT 533CB 633AT 633CB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-006
MRB 575337-01-1
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575337-01-1 OUTBOARD DOUBLE SLOTTED FLAP TAB ARTIC 537 DI
538
539
587
637
638
639
687
Y
TAB ARTICULATION AT STATIONS 3 A, 3 B, 3 C, LH/RH
TASK 575337-02-1.
NOTE 3: CPCP
Access panels :
537AB 537BB 537CB 538AB 538BB 538CB 539AB
539BB 539CB 637AB 637BB 637CB 638AB 638BB
638CB 639AB 639BB 639CB
Skills :
AF 1 1.60 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-017
MRB 575337-02-1
NTM 57-53-37
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575337-02-1 OUTBOARD DOUBLE SLOTTED FLAP TAB ARTIC 537 SDI
538
539
587
637
638
639
687
Y
DOUBLE-SLOTTED FLAP, TAB ARTICULATION AT STATIONS 3
A, 3 B, 3 C, LH/RH
AS TASK 575337-01-1.
FLAP EXTENSION
NOTE 4: CPCP
Access panels :
537AB 537BB 537CB 538AB 538BB 538CB 539AB
539BB 539CB 637AB 637BB 637CB 638AB 638BB
638CB 639AB 639BB 639CB
Skills :
NDT 1 4.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-007
MRB 575339-01-1
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
587
632
687
Y
TAB ARTICULATION AT TRACK 3, LH/RH
TASK 575339-02-1.
NOTE 4: CPCP
Access panels :
532AT 532CB 632AT 632CB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-018
MRB 575339-02-1
NTM 57-53-39
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
587
632
687
Y
DOUBLE-SLOTTED FLAP, TAB ARTICULATION AT TRACK 3,
LH/RH
AS TASK 575339-01-1.
FLAP EXTENSION
NOTE 4: CPCP
Access panels :
532AT 532CB 632AT 632CB
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-210-008
MRB 575341-01-1
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
587
633
687
Y
TAB ARTICULATION AT TRACK 4, LH/RH
TASK 575341-02-1.
NOTE 4: CPCP
Access panels :
533AT 533CB 633AT 633CB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-019
MRB 575341-02-1
NTM 57-53-41
T 30 000 CY
T 12 YE
I 20 000 CY
I 12 YE
587
633
687
Y
DOUBLE-SLOTTED FLAP, TAB ARTICULATION AT TRACK 4,
LH/RH
AS TASK 575341-01-1.
FLAP EXTENSION
NOTE 4: CPCP
Access panels :
533AT 533CB 633AT 633CB
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-020
MRB 575343-01-1
NTM 57-53-43
T 48 000 CY
T 12 YE
I 20 000 CY
I 12 YE
ALL 575343-01-1 OUTBD DOUBLE SLOTTED FLAP RIB 2, 9, 12 587 SDI
687
Y
DOUBLE-SLOTTED FLAP, RIB 2, 9 AND 12, LH/RH
FLAP EXTENSION
NOTE 4: CPCP
Skills :
NDT 1 1.00 MHrs
AMM 575300/6
AMT 575300-200-009
MRB 575350-01-1
T 12 YE
I 12 YE
ALL 575350-01-1 OUTBOARD FLAP TACK 3-4 CARRIAGE 532 DI
533
632
633
Y
DETAILED INSPECTION OF OUTER WING OUTBOARD FLAP TRACK
3 AND 4 CARRIAGE FORGINGS
NOTE 3: CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-220-006
MRB 575350-02-2
NTM 575350
T 48 000 CY
I 16 400 CY
ALL 575350-02-2 OUTBOARD FLAP TACK 3-4 CARRIAGE 532 SDI
533
632
633
Y
SPECIAL DETAILED INSPECTION (US) OF OUTER WING
OUTBOARD FLAP TRACK 3 AND 4 CARRIAGE FORGINGS
NOTE : SAMPLING 20%
Skills :
NDT 1 2.00 MHrs
AMM 575300/6
AMT 575300-200-001
MRB 575351-01-2
T 36 000 CY
I 20 000 CY
ALL 575351-01-2 OUTBOARD FLAP TRACK 3-4 ROLLERS 500 DI
600
Y
3 AND 4 CARRIAGE ROLLERS
NOTE : SAMPLING 20%
Skills :
AF 1 0.20 MHrs
AMM 575300/6
AMT 575300-220-007
MRB 575352-01-2
NTM 57-53-52
T 36 000 CY
I 15 000 CY
ALL 575352-01-2 OUTBOARD FLAP TRACK 3-4 BOLT ASSEMBLY 532 SDI
533
632
633
Y
SPECIAL DETAILED INSPECTION (MPI) OF OUTER WING
OUTBOARD FLAP TRACK 3 AND 4 FLAP PIVOT BOLT ASSEMBLY
PREP.: INNER BOLT REMOVED
FLAP EXTENSION
NOTE : SAMPLING 20%
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 575300/6
AMT 575300-200-010
MRB 575354-01-1
T 6 YE
I 6 YE
ALL 575354-01-1 OUTBOARD FLAP TRACK 3-4 DRIVE LEVERS 532 DI
533
632
633
Y
3 AND 4 DRIVE LEVERS
SPOILER EXTENSION
NOTE 3: CPCP
Skills :
AF 1 0.12 MHrs
AMM 575300/6
AMT 575300-220-008
MRB 575354-02-2
NTM 575354
T 48 000 CY
I 16 400 CY
ALL 575354-02-2 OUTBOARD FLAP TRACK3-4 DRIVE LEVERS 532 SDI
533
632
633
Y
SPECIAL DETAILED INSPECTION (HFEC) OF OUTER WING
OUTBOARD FLAP TRACK 3 AND 4 DRIVE LEVERS
SPOILER EXTENSION
NOTE : SAMPLING 20%
Skills :
NDT 1 4.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 576000/6
AMT 576000-200-003
MRB 576104-01-1
T 12 YE
I 12 YE
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
576104-01-1 AILERON SKIN ATTACH TO TRAILING EDGE 500 DI
600
Y
DETAILED INSPECTION OF AILERON, UPPER AND LOWER
EXTERNAL SKINS AT ATTACHMENT TO TRAILING EDGE,
INBOARD AND OUTBOARD EDGES, SPARS AND RIBS
Skills :
AF 1 1.00 MHrs
AMM 576000/6
AMT 576000-210-001
MRB 576106-01-1
T 12 YE
I 12 YE
ALL 576106-01-1 AILERON UPPER AND LOWER SKINS 500 DI
600
Y
DETAILED INSPECTION OF AILERON, UPPER AND LOWER
SKINS, EXTERNAL SURFACE
NOTE : 100% THRESHOLD = 24YE
NOTE : SAMPLING 20%
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 576000-200-005
MRB 576107-01-1
T 6 YE
I 6 YE
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
576107-01-1 AILERON UPPER AND LOWER EXTERNAL SKINS 500 DI
600
Y R
DETAILED INSPECTION OF AILERON UPPER AND LOWER
EXTERNAL SKINS AT ATTACHMENT TO TRAILING EDGE AND
OUTBOARD CLOSING RIB
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
5343
5385
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Skills :
AF 1 1.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577100/6
AMT 577100-200-001
MRB 577001-01-2
T 48 000 CY
I 16 400 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
577001-01-2 SPOILER 1 FITTING 500 DI
600
Y R
DETAILED INSPECTION OF SPOILER 1, CENTER HINGE
FITTING AND ACTUATOR BRACKET
TASK 577001-02-2
SPOILER EXTENSION
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 0.44 MHrs
AMM 577100/6
AMT 577100-200-001
MRB 577001-01-4
T 48 000 CY
I 15 300 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
577001-01-4 SPOILER 1 FITTING 500 DI
600
Y
TASK 577001-02-3
SPOILER EXTENSION
Skills :
AF 1 0.44 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMT 577100-200-001 T 24 YE
I 12 YE
ALL 577001-01-6 SPOILER 1 FITTING 500 DI
600
Y
SPOILER 1 FITTING
PREP: FLAPS AND SPOILERS EXTENDED;
Skills :
AF 1 0.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577100/6
AMT 577100-220-001
MRB 577001-02-2
NTM 57-70-01
T 48 000 CY
I 16 400 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
577001-02-2 SPOILERS 1 FITTING 500 SDI
600
Y
SPECIAL DETAILED INSPECTION (HFEC) OF SPOILER 1,
ACTUATOR BRACKET
TASK 577001-01-2
FLAP EXTENSION
SPOILERS EXTENSION
Skills :
NDT 1 1.04 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577100/6
AMT 577100-220-001
MRB 577001-02-3
NTM 57-70-01
T 48 000 CY
I 15 300 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
577001-02-3 SPOILERS 1 FITTING 500 SDI
600
Y
SPECIAL DETAILED INSPECTION (HFEC) OF SPOILER 1,
ACTUATOR BRACKET
TASK 577001-01-4
FLAP EXTENSION
SPOILER EXTENSION
Skills :
NDT 1 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577100/6
AMT 577100-200-002
MRB 577002-01-1
T 12 YE
I 12 YE
ALL 577002-01-1 SPOILER 1 SKINS OF CENTER FITTING 500 DI
600
Y
DETAILED INSPECTION OF SPOILER 1, UPPER AND LOWER
SKINS, IN REGION OF CENTER HINGE FITTING
SPOILER EXTENSION
Skills :
AF 1 0.08 MHrs
AMM 577100/6
AMT 577100-200-003
MRB 577003-01-1
T 12 YE
I 12 YE
ALL 577003-01-1 SPOILER 1 SKINS AT TRAILING EDGE 500 DI
600
Y
DETAILED INSPECTION OF SPOILER 1, UPPER AND LOWER
SKINS, AT TRAILING EDGE AND INBOARD AND OUTBOARD
EDGES
PREP. : SPOILER EXTENSION
Skills :
AF 1 0.44 MHrs
AMM 577200/6
AMT 577200-200-002
MRB 577006-01-1
T 12 YE
I 12 YE
ALL 577006-01-1 SPOILER 2-5 CENTRE FITTING 500 DI
600
Y
DETAILED INSPECTION OF SPOILER 2,3,4 AND 5, CENTER
HINGE FITTINGS
SPOILER EXTENSION
NOTE : CPCP
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577200/6
AMT 577200-200-004
MRB 577006-02-2
NTM 57-70-06
T 48 000 CY
I 16 400 CY
2255
2261
2267
2303
2480
3600
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
577006-02-2 SPOILER 2-5 CENTRE FITTING 500 SDI
600
Y R
SPECIAL DETAILED INSPECTION (HFEC AND US) OF SPOILER
2, 3, 4 AND 5, CENTER HINGE FITTINGS
PREP. : PINS REMOVED;
FLAPS EXTENDED;
SPOILERS EXTENDED;
NOTE : SAMPLING 20%
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
Skills :
AF 1 2.00 MHrs
NDT 1 2.00 MHrs
AMM 577200/6
AMT 577200-200-004
MRB 577006-02-3
NTM 57-70-06
T 48 000 CY
I 15 300 CY
2974
3005
3013
3022
3198
3315
3355
3737
3862
3964
3966
4136
4213
4277
4311
4315
5164
5241
5247
5297
5343
5427
577006-02-3 SPOILER 2-5 CENTRE FITTING 500 SDI
600
Y
SPECIAL DETAILED INSPECTION (HFEC AND US) OF SPOILER
2, 3, 4 AND 5, CENTER HINGE FITTINGS
PREP. : PINS REMOVED;
FLAPS EXTENDED;
SPOILERS EXTENDED;
NOTE : SAMPLING 20%
Skills :
AF 1 4.00 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577500/6
AMT 577500-200-001
MRB 577007-01-1
T 12 YE
I 12 YE
ALL 577007-01-1 SPOILER 2-5 SKINS OF CENTER FITTING 500 DI
600
Y
DETAILED INSPECTION OF SPOILER 2,3,4 AND 5, UPPER AND
LOWER SKINS IN REGION OF CENTER HINGE FITTING
SPOILER EXTENSION
Skills :
AF 1 0.20 MHrs
AMM 577200/6
AMT 577200-200-003
MRB 577008-01-1
T 12 YE
I 12 YE
ALL 577008-01-1 SPOILER 2-5 SKINS AT TRAILING EDGE 500 DI
600
Y
DETAILED INSPECTION OF SPOILER 2,3,4 AND 5, UPPER AND
LOWER SKINS AT TRAILING EDGE AND INBOARD AND OUTBOARD
EDGES
SPOILER EXTENSION
Skills :
AF 1 1.64 MHrs
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 57 WINGS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 577100/6
AMT 577100-210-001
MRB 577009-01-1
T 12 YE
I 12 YE
ALL 577009-01-1 SPOILERS 1 TO 5 EXTERNAL SURFACE 500 DI
600
Y
DETAILED INSPECTION OF SPOILERS 1 TO 5, UPPER AND
LOWER SKINS, EXTERNAL SURFACE
SPOILER EXTENSION
Skills :
AF 1 0.44 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 712112/6
AMT 712112-200-013
MRB 712111-04-1
T 12 YE
I 12 YE
See note
ALL 712111-04-1 FORWARD ENGINE MOUNT 435 DI
436
445
446
451
461
Y
DETAILED INSPECTION OF FORWARD ENGINE MOUNT
INSTALLATION
NOTE 1: ACCOMPLISHMENT OF THIS INSPECTION TO BE
PERFORMED WITH A MAXIMUM INTERVAL OF 12 YEARS
BETWEEN MOUNT DISASSEMBLY
PREP. : ENGINE MOUNT DISASSEMBLED
ENGINE REMOVAL
NOTE 2: CPCP
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
EN 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 712211/6
AMT 712211-200-012
MRB 712211-02-1
T 12 YE
I 12 YE
See note
453
454
461
463
464
Y
DETAILED INSPECTION OF AFT ENGINE MOUNT INSTALLATION
NOTE 1: ACCOMPLISHMENT OF THIS INSPECTION TO BE
PERFORMED WITH A MAXIMUM INTERVAL OF 10 YEARS
BETWEEN MOUNT DISASSEMBLY
PREP. : ENGINE MOUNT DISASSEMBLED
ENGINE REMOVAL
NOTE 2: CPCP
Access panels :
437AL 438AR 447AL 448AR 451AL 452AR 461AL
462AR
Skills :
EN 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES - ZNL Page : 1

LEP R 1 SEP 2013

CHAPTER : ZL ZONAL CARD
Task
code
Threshold
Interval
Ctrl References Eff
AMT 052530-200-008 I 24 MO
ALL ZL-535-01-2 FLAP TAB HINGE AND FAIRING NO. 1A 535 GVI
635
N
GENERAL VISUAL INSPECTION OF FLAP TAB HINGE AND
FAIRING NO. 1A (EWIS)
Access panels :
535CB 635CB
Skills :
B1 1 0.40 MHrs
AMT 052530-200-010 I 24 MO
ALL ZL-537-01-2 FLAP TAB HINGE AND FAIRING NO. 3A 537 GVI
637
N
FAIRING NO. 3A (EWIS)
NOTE: THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS ISS 14
Access panels :
537AB 537CB 637AB 637CB
Skills :
B1 1 0.20 MHrs
Date ATA ZL Date 22/01/2014
Amendment No Issue No Page ZNL - ZL [1 / 2] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : ZL ZONAL CARD
Task
code
Threshold
Interval
Ctrl References Eff
AMT 052530-200-011 I 24 MO
ALL ZL-538-01-2 FLAP TAB HINGE AND FAIRING NO. 3B 538 GVI
638
N
FAIRING NO. 3B (EWIS)
Access panels :
538AB 538CB 638AB 638CB
Skills :
B1 1 0.40 MHrs
AMT 052530-200-012 I 24 MO
ALL ZL-539-01-2 FLAP TAB HINGE AND FAIRING NO. 3C 539 GVI
639
N
FAIRING NO. 3C (EWIS)
Access panels :
539AB 539CB 639AB 639CB
Skills :
B1 1 0.40 MHrs
Date ATA ZL Date 22/01/2014
Amendment No Issue No Page ZNL - ZL [2 / 2] :
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 05 MAINTENANCE CHECKS
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052100/6
AMT 052100-200-002
MRB ZL-100-02-3
MRB 531109-01-2
MRB 531115-01-1
MRB 531116-01-1
MRB 531119-02-1
MRB 531172-02-1
MRB 532137-02-1
MRB 532165-01-6
MRB 534108-01-1
MRB 534131-01-2
MRB 534176-02-1
I 4 MO
ALL ZL-100-02-3 LOWER HALF OF FUSELAGE 100 GVI Y
GENERAL VISUAL INSPECTION OF LOWER HALF OF FUSELAGE.
Skills :
AF 1 1.00 MHrs
B2 1 0.00 MHrs
AMM 052110/6
AMT 052110-200-001
MRB ZL-110-01-1
I 48 MO
2C Check :
ALL ZL-110-01-1 RADOME 110 GVI Y
GENERAL VISUAL INSPECTION OF RADOME (EWIS)
Access panels :
110AL
Skills :
AF 1 0.10 MHrs
Amendment No Issue No Page ZNL - 05 [1 / 76] :
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052120/6
AMT 052120-200-001
MRB ZL-121-01-1
I 24 MO
C Check :
ALL ZL-121-01-1 AVIONICS COMPARTMENT 121 GVI
122
Y
GENERAL VISUAL INSPECTION OF AVIONIC
COMPARTMENT (EWIS)
Access panels :
811
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 052120/6
AMT 052120-200-007
MRB ZL-121-02-1
MRB 21.21.00/03
MRB 27.21.00/08
I 6 YE
ALL ZL-121-02-1 AVIONICS COMPARTMENT 121 GVI
122
Y
GENERAL VISUAL INSPECTION OF AVIONIC
COMPARTMENT (EWIS)
PREP. : INSULATION TO BE DISPLACED AS REQUIRED TO
COMPLETE THE REQUIRED INSPECTION.
Access panels :
121AF 121AL 121BF 121CF 122BF 811
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052120/6
AMT 052120-200-012
MRB ZL-123-02-1
I 4 MO
ALL ZL-123-02-1 NOSE LANDING GEAR WELL 123 GVI Y
GENERAL VISUAL INSPECTION OF THE NOSE GEAR WELL (EWIS)
Access panels :
713 714
Skills :
AF 1 0.50 MHrs
B2 1 0.00 MHrs
AMM 052120/6
AMT 052120-200-003
AMT 052120-200-008
MRB ZL-125-01-2
I 24 MO
ALL ZL-125-01-2 LATERAL AVIONICS COMPARTMENT 125 GVI
126
129
Y
GENERAL VISUAL INSPECTION OF LATERAL AVIONIC
COMPARTMENT (EWIS)
PREP: 813 IF INSTALLED
Access panels :
125AL 812 822
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
MEC 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052120/6
AMT 052120-200-008
MRB ZL-125-02-1
MRB 212100/03
MRB 253000/02
MRB 351000/06
I 24 000 FH
I 6 YE
ALL ZL-125-02-1 LATERAL AVIONICS COMPARTMENT 125 GVI
126
Y
GENERAL VISUAL INSPECTION OF LATERAL AVIONIC
COMPARTMENT (EWIS)
COMPLETE THE REQUIRED INSPECTION
813 IF INSTALLED
Access panels :
812 822 824 831
Skills :
AF 1 0.40 MHrs
AMM 052120/6
AMT 052120-200-005
MRB ZL-127-01-1
I 24 MO
C Check :
ALL ZL-127-01-1 REAR AVIONICS COMPARTMENT 127 GVI
128
Y
GENERAL VISUAL INSPECTION OF REAR AVIONIC
COMPARTMENT (EWIS)
Access panels :
824
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052120/6
AMT 052120-200-010
MRB ZL-127-02-2
MRB 21.21.00/03
MRB 21.27.00/04
I 6 YE
ALL ZL-127-02-2 REAR AVIONICS COMPARTMENT 127 GVI
128
Y
GENERAL VISUAL INSPECTION OF REAR AVIONIC
COMPARTMENT (EWIS)
COMPLETE THE REQUIRED INSPECTION;
Access panels :
127BF 127BG 127CF 127DF 128CF 128EG 131AW
131BW 131CW 131DW 132BW 132EW 824 825
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052130/6
AMT 052130-200-001
MRB ZL-131-01-2
MRB 255000/04
MRB 255000/05
MRB 255000/06
MRB 255000/07
MRB 255000/08
MRB 532137-02-1
I 750 FH
I 750 CY
I 4 MO
ALL ZL-131-01-2 FORWARD CARGO COMPARTMENT 131 GVI
132
Y
COMPARTMENT(AS FAR AS VISIBLE IF ACT(S)
INSTALLED) (EWIS)
.
.
.
.
.
.
.
.
.
.
.
.
Access panels :
825
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052130/6
AMT 052130-200-004
MRB ZL-131-02-2
MRB ZL-131-02-3
MRB 212100/03
MRB 383200/03
I 24 000 FH
I 6 YE
132
Y
COMPARTMENT (EWIS)
Access panels :
131FF 131GF 131JF 131KF 131QF 131VF 131WF
131YF 131ZF 132FF 132GF 132JF 132MW 132QF
132RF 132VF 132YF 825
Skills :
AF 1 0.40 MHrs
AMM 052130/6
AMT 052130-200-006
MRB ZL-131-03-2
MRB 532103-01-2
I 12 YE
132
Y
COMPARTMENT (EWIS)
PREP. : - CEILING PANELS FROM FR 24 TO FR 35.7
- INSULATION TO BE DISPLACED AS REQUIRED TO
- SIDEWALL PANELS FROM FR 24 TO FR 35.7
Access panels :
825
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052130/6
AMT 052130-200-002
MRB ZL-133-01-4
MRB 383200/03
I 24 000 FH
I 6 YE
ALL ZL-133-01-4 BAY UNDER FWD CARGO COMPARTMENT FLOOR 133 GVI
134
Y
GENERAL VISUAL INSPECTION OF UNDERFLOOR BAY OF FWD
CARGO COMPARTMENT (EWIS)
PREP. : FLOOR PANELS FROM FR 24 TO FR 35.7
Access panels :
133AL 134AR 825
Skills :
AF 1 0.50 MHrs
AMM 052130/6
AMT 052130-200-003
MRB ZL-137-01-1
MRB 212100/03
MRB 215000/08
MRB 215000/09
MRB 532103-01-1
MRB 532103-01-2
I 24 000 FH
I 6 YE
ALL ZL-137-01-1 BAY BEHIND FWD CARGO COMPARTMENT 137 GVI
138
Y
GENERAL VISUAL INSPECTION OF BAY BEHIND FWD CARGO
COMPARTMENT (EWIS)
PREP : ACT(S) NO.4 AND NO.6 REMOVED (IF INSTALLED)
INSULATION TO BE DISPLACED AS REQUIRED TO
Access panels :
131NW 131PW 132PW 825
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052140/6
AMT 052140-200-001
MRB ZL-141-01-1
MRB 28.11.00/05
MRB 28.11.00/06
MRB 28.21.00/07
MRB 571150-01-1
I 12 YE
ALL ZL-141-01-1 WING CENTER BOX 141 GVI
142
Y
GENERAL VISUAL INSPECTION OF WING CENTER BOX (EWIS)
Access panels :
147AZ 148AZ 734 744
Skills :
AF 1 0.60 MHrs
AMM 052140/6
AMT 052140-200-002
MRB ZL-145-01-1
MRB 212100/03
MRB 531900/04
I 6 YE
ALL ZL-145-01-1 ZONE UNDER CABIN FLOOR 145 GVI
146
Y
GENERAL VISUAL INSPECTION OF ZONE UNDER CABIN FLOOR (EWIS)
PREP. : - FLOOR PANELS FROM FR 36 TO FR 46
- INSULATION TO BE DISPLACED AS REQUIRED TO
Access panels :
832 842
Skills :
AF 2 2.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052140/6
AMT 052140-200-004
MRB ZL-145-02-1
MRB 360000/08
I 4 MO
ALL ZL-147-02-1 MAIN GEAR WELL-HYDRAULICS COMPARTMENT 147 GVI
148
Y
GENERAL VISUAL INSPECTION OF MLG-WELL AND HYDRAULIC
COMPARTMENT (EWIS)
Access panels :
734 744
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052140/6
AMT 052140-200-005
MRB ZL-147-03-1
MRB 282200/02
MRB 291000/21
MRB 291000/31
MRB 571150-01-1
I 24 000 FH
I 6 YE
ALL ZL-147-03-1 MAIN GEAR WELL-HYDRAULICS COMPARTMENT 147 GVI
148
Y
GENERAL VISUAL INSPECTION OF MLG-WELL AND HYDRAULIC
COMPARTMENT (EWIS)
Access panels :
147AB 147EB 734 744
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052150/6
AMT 052150-200-001
MRB ZL-151-01-1
MRB 25.50.00/05
MRB 25.50.00/06
MRB 25.50.00/07
MRB 25.50.00/08
MRB 25.50.00/09
MRB 25.50.00/10
MRB 25.50.00/19
MRB 25.50.00/22
MRB 534157-01-1
MRB 534157-01-2
MRB 534160-01-1
MRB 534160-01-2
I 750 FH
I 750 CY
I 4 MO
ALL ZL-151-01-1 AFT CARGO COMPARTMENT 151 GVI
152
Y
(AS FAR AS VISIBLE, IF ACT IS INSTALLED) (EWIS)
Access panels :
826
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052150/6
AMT 052150-200-003
MRB ZL-151-02-4
MRB 212100/03
MRB 253000/02
MRB 253000/03
MRB 282200/02
MRB 360000/09
MRB 383200/03
I 24 000 FH
I 6 YE
152
Y
GENERAL VISUAL INSPECTION OF AFT CARGO
COMPARTMENT (EWIS)
Access panels :
151AC 151AW 151AY 151BC 151BW 151CW 151DC
151DW 151EW 151HW 151JW 151KC 152BW 152CW
152DW 152FW 152GW 152HW 152JW 826
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052150/6
AMT 052150-200-004
MRB ZL-151-03-8
MRB 534120-01-1
I 12 YE
152
Y
GENERAL VISUAL INSPECTION OF AFT CARGO
COMPARTMENT (EWIS)
SIDEWALL PANELS FROM FR 47.2 TO FR 59;
Access panels :
826
Skills :
AF 1 0.40 MHrs
AMT 052150-200-002
MRB ZL-153-01-10
MRB 38.32.00/01
MRB 38.32.00/03
I 24 000 FH
I 6 YE
ALL ZL-153-01-10 UNDERFLOOR BAY OF AFT CARGO COMPTMENT 153 GVI
154
Y
GENERAL VISUAL INSPECTION OF UNDERFLOOR BAY OF AFT
PREP. : FLOOR PANELS FROM FR 47.2 TO FR 59;
Access panels :
826
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052160/6
AMT 052160-200-001
MRB ZL-161-01-1
MRB 25.50.00/05
I 750 FH
I 4 MO
ALL ZL-161-01-1 BULK CARGO COMPARTMENT 161 GVI
162
Y
(AS FAR AS VISIBLE, IF ACT IS INSTALLED) (EWIS)
Access panels :
826
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052160/6
AMT 052160-200-003
MRB ZL-161-02-1
MRB 212100/03
MRB 282200/02
MRB 360000/09
I 24 000 FH
I 6 YE
162
Y
GENERAL VISUAL INSPECTION OF BULK CARGO
COMPARTMENT (EWIS)
Access panels :
161AC 161AW 161BW 161CW 162BW 162CW 162EW
826
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052160/6
AMT 052160-200-004
MRB ZL-161-03-2
MRB 534120-01-1
T 12 YE
I 12 YE
162
Y
GENERAL VISUAL INSPECTION OF BULK CARGO
COMPARTMENT (EWIS)
Access panels :
826 827
Skills :
AF 1 0.40 MHrs
AMM 052160/6
AMT 052160-200-002
MRB ZL-163-01-1
I 6 YE
ALL ZL-163-01-1 UNDERFLOOR BAY OF BULK CARGO COMPT. 163 GVI
164
Y
GENERAL VISUAL INSPECTION OF UNDERFLOOR BAY OF BULK
PREP. : FLOOR PANELS FROM FR 59 TO FR 65
Access panels :
826 827
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052170/6
AMT 052170-200-001
MRB ZL-171-01-1
MRB 360000/08
MRB 381000/02
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-171-01-1 AFT CABIN UNDERFLOOR COMPARTMENT 171 GVI
172
Y
GENERAL VISUAL INSPECTION OF AFT CABIN UNDERFLOOR
COMPARTMENT (EWIS)
Access panels :
161DW 162DW 171AL 172AR 826
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052170/6
AMT 052170-200-002
MRB ZL-171-01-2
MRB 212100/03
MRB 212300/01
MRB 253000/02
MRB 282200/02
MRB 383101/04
MRB 383200/01
MRB 383200/03
I 24 000 FH
I 72 MO
ALL ZL-171-02-1 AFT CABIN UNDERFLOOR COMPARTMENT 171 GVI
172
Y
GENERAL VISUAL INSPECTION OF AFT CABIN UNDERFLOOR
COMPARTMENT (EWIS)
PREP : ACT(S) REMOVED (IF INSTALLED);
Access panels :
161DW 162DW 171AL 172AR 826
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052190/6
AMT 052190-200-001
MRB ZL-191-01-1
I 24 MO
C Check :
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
ZL-191-01-1 AIR CONDITIONING COMPT AND FAIRINGS 191 GVI
192
Y
GENERAL VISUAL INSPECTION OF AIR CONDITIONING
COMPARTMENT AND FAIRINGS (EWIS)
Access panels :
191BB 191KB 192KB
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 052190-200-001 I 24 MO
4669
4703
4737
4783
4826
4863
4945
4971
5251
5275
5306
5340
5385
5392
5418
5438
5456
5495
5555
5699
5916
5958
ZL-191-01-2 AIR CONDITIONING COMPT AND FAIRINGS 191 GVI
192
Y R
AIR CONDITIONING COMPARTMENT AND
FAIRINGS
Access panels :
191AB 191BB 191KB 192KB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052190/6
AMT 052190-200-009
MRB ZL-191-02-1
MRB 215000/08
MRB 215000/09
I 24 000 FH
I 6 YE
ALL ZL-191-02-1 AIR CONDITIONING COMPT AND FAIRINGS 191 GVI
192
Y
Access panels :
191AB 191AT 191BT 191CT 191DT 191EB 191ET
191GB 191HB 191JB 191KB 191LB 192AB 192AT
192BT 192CT 192DT 192EB 192ET 192FB 192KB
192LB 192MB
Skills :
AF 1 1.00 MHrs
AMM 052190/6
AMT 052190-200-003
MRB ZL-193-01-1
MRB ZL-193-01-2
I 6 YE
ALL ZL-193-01-2 OFFWING ESCAPE SLIDE STOWAGE AREA 193 GVI
194
Y
GENERAL VISUAL INSPECTION OF OFFWING ESCAPE SLIDE
STOWAGE AREA (EWIS)
Access panels :
193AT 194AT
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052190/6
AMT 052190-200-005
MRB ZL-195-01-1
MRB 291000/21
MRB 291000/31
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-195-01-1 HYDRAULICS COMPARTMENT AND FAIRINGS 195 GVI
196
Y
GENERAL VISUAL INSPECTION OF HYDRAULIC COMPARTMENT
AND FAIRINGS (EWIS)
Access panels :
195BB 196BB
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 052190/6
AMT 052190-200-007
MRB ZL-197-01-2
MRB 291000/21
I 6 YE
ALL ZL-197-01-2 REAR FAIRING 197 GVI
198
Y
GENERAL VISUAL INSPECTION OF REAR FAIRING (EWIS)
Access panels :
197AB 197GB 197KB 198GB 198KB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052200/6
AMT 052200-200-002
MRB ZL-200-02-3
MRB 531106-01-1
MRB 531114-02-1
MRB 531117-01-2
MRB 531118-01-2
MRB 531179-01-1
MRB 532152-01-1
MRB 532164-01-2
MRB 533133-01-2
MRB 534118-01-1
MRB 534131-01-2
MRB 534176-02-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-200-02-3 UPPER HALF OF FUSELAGE 200 GVI Y
GENERAL VISUAL INSPECTION OF UPPER HALF OF FUSELAGE
Skills :
AF 1 0.30 MHrs
B2 1 0.00 MHrs
AMM 052210/6
AMT 052210-200-001
MRB ZL-211-01-1
I 15 000 FH
I 10 000 CY
I 48 MO
2C Check :
ALL ZL-211-01-1 COCKPIT 211 GVI
212
Y
GENERAL VISUAL INSPECTION OF COCKPIT (EWIS)
Access panels :
211AW 211AZ 211BW 211EW 211LW 212AW 212AZ
212BW 212EW 212JW 831
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052210/6
AMT 052210-200-002
MRB ZL-211-02-1
I 12 YE
ALL ZL-211-02-1 COCKPIT 211 GVI
212
Y
GENERAL VISUAL INSPECTION OF COCKPIT (EWIS)
PREP : INSULATION TO BE DISPLACED AS REQUIRED TO
Access panels :
211BC 211FC 211HC 212BC 212FC 212KW 831
Skills :
AF 1 0.40 MHrs
AMM 052220/6
AMT 052220-200-006
MRB ZL-221-02-1
I 12 YE
ALL ZL-221-02-1 FORWARD CABIN UTILITY AREA 221 GVI
222
Y
GENERAL VISUAL INSPECTION OF FWD CABIN UTILITY AREAS
INCLUDING FLOOR STRUCTURE (EWIS)
FURNISHINGS FROM FR 12 TO FR 20;
GALLEYS;
SEATS REMOVED;
Access panels :
831 841
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052220/6
AMT 052220-200-003
MRB ZL-223-01-1
MRB 531185-01-1
I 12 YE
ALL ZL-223-01-1 FWD CABIN UTILITY AREA OVERHEAD COMPT. 223 GVI
224
Y
GENERAL VISUAL INSPECTION OF FWD CABIN UTILITY AREA
OVERHEAD COMPARTMENT (EWIS)
GALLEYS;
Access panels :
831 841
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052230/6
AMT 052230-200-001
MRB ZL-231-01-2
MRB 532101-01-2
I 12 YE
ALL ZL-231-01-2 FORWARD PASSENGER COMPARTMENT 231 GVI
232
Y
GENERAL VISUAL INSPECTION OF FWD PASSENGER
COMPARTMENT (EWIS)
(INCLUDING FLOOR STRUCTURE)
FURNISHING REMOVED;
GALLEYS;
SEATS REMOVED;
SIDEWALL PANELS FROM FR 20 TO FR 35.8;
Access panels :
831 841
Skills :
AF 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052230/6
AMT 052230-200-003
MRB ZL-233-01-2
MRB 531185-01-1
MRB 532101-01-2
I 12 YE
ALL ZL-233-01-2 FWD PASSENGER OVERHEAD COMPT 233 GVI
234
Y
GENERAL VISUAL INSPECTION OF FWD PASSENGER OVERHEAD
COMPARTMENT (EWIS)
PREP : CEILING PANELS FROM FR 20 TO FR 35.8
GALLEYS
OVERHEAD STOWAGE COMPARTMENTS REMOVED
Access panels :
831 841
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052240/6
AMT 052240-200-001
MRB ZL-241-01-2
MRB 533134-01-2
I 12 YE
ALL ZL-241-01-2 MID PASSENGER COMPARTMENT 241 GVI
242
Y
GENERAL VISUAL INSPECTION OF CENTER PASSENGER
COMPARTMENT (EWIS)
PREP. : FURNISHING, SIDEWALL AND FLOOR PANELS FROM FR
35.8 TO FR 47 REMOVED;
GALLEYS;
Access panels :
832 842
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052240/6
AMT 052240-200-003
MRB ZL-243-01-3
MRB 533134-01-2
I 12 YE
ALL ZL-243-01-3 MID PASSENGER OVERHEAD COMPT 243 GVI
244
Y
GENERAL VISUAL INSPECTION OF CENTER PASSENGER
OVERHEAD COMPARTMENT (EWIS)
PREP. : CEILING PANELS FROM FR 35.8 TO FR47;
GALLEYS;
Access panels :
832 842
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052250/6
AMT 052250-200-001
MRB ZL-251-01-2
MRB 534119-01-1
T 12 YE
I 12 YE
ALL ZL-251-01-2 AFT PASSENGER COMPARTMENT 251 GVI
252
Y
GENERAL VISUAL INSPECTION OF AFT PASSENGER
COMPARTMENT (EWIS)
GALLEYS;
SEATS REMOVED;
FURNISHING, SIDEWALL AND FLOOR PANELS FROM FR
47 TO FR 64 REMOVED;
Access panels :
832 842
Skills :
AF 1 0.70 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052250/6
AMT 052250-200-003
MRB ZL-253-01-1
MRB 534119-01-1
MRB 534119-01-2
MRB 534119-01-3
T 12 YE
I 12 YE
ALL ZL-253-01-1 AFT PASSENGER OVERHEAD COMPT 253 GVI
254
Y
GENERAL VISUAL INSPECTION OF AFT PASSENGER OVERHEAD
COMPARTMENT (EWIS)
PREP : CEILING PANELS FROM FR 47 TO FR 64;
GALLEYS;
Access panels :
832 842
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052260/6
AMT 052260-200-004
MRB ZL-261-02-1
MRB 534119-01-1
MRB 534119-01-2
MRB 534119-01-3
I 12 YE
ALL ZL-261-02-1 AFT CABIN UTILITY AREAS 261 GVI
262
Y
GENERAL VISUAL INSPECTION OF AFT CABIN UTILITY AREAS
INCLUDING FLOOR STRUCTURE (EWIS)
PREP. : FLOOR PANELS BETWEEN FR 64 TO 70;
FURNISHINGS BETWEEN FR 64 TO 70;
GALLEYS;
SEATS REMOVED;
SIDEWALL/DOOR FRAME LINING REMOVED;
Access panels :
832 842
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052260/6
AMT 052260-200-003
MRB ZL-263-01-1
MRB 534119-01-1
MRB 534119-01-2
MRB 534119-01-3
T 12 YE
I 12 YE
ALL ZL-263-01-1 AFT CABIN OVERHEAD COMPARTMENT 263 GVI
264
Y
GENERAL VISUAL INSPECTION OF AFT CABIN OVERHEAD
COMPARTMENT (EWIS)
GALLEYS;
Access panels :
832 842
Skills :
AF 1 0.70 MHrs
AMM 052300/6
AMT 052300-200-002
MRB ZL-300-02-1
MRB 236000/02
MRB 491600/04-36
MRB 535103-01-1
MRB 535125-01-1
MRB 551017-01-1
MRB 551018-01-1
MRB 552001-01-1
MRB 553001-01-1
MRB 554001-01-1
I 7 500 FH
I 24 MO
ALL ZL-300-02-1 STABILIZERS AND CONE/REAR FUSELAGE 300 GVI Y
GENERAL VISUAL INSPECTION OF STABILIZERS AND
CONE/REAR FUSELAGE
NOTE: THE FIRST TIME OF TASK ACCOMPLISHMENT SINCE AMS
ISS14 AMD 00 EFFECTIVE DATE IS NEXT 2A CHECK
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052310/6
AMT 052310-200-001
MRB ZL-311-01-1
MRB 27.21.00/08
MRB 274000/19
MRB 282200/02
MRB 360000/08
MRB 535124-01-1
MRB 551005-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-311-01-1 AFT FUSELAGE TAIL SECTION 311 GVI
312
Y
GENERAL VISUAL INSPECTION OF AFT FUSELAGE TAIL
SECTION (EWIS)
Access panels :
312AR 314AR
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052310/6
AMT 052310-200-002
MRB ZL-313-01-1
MRB 360000/08
MRB 491600/01-32
MRB 491600/03-13
MRB 491600/05-36
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-313-01-1 TAIL CONE APU AIR INTAKE AREA 313 GVI
314
Y
GENERAL VISUAL INSPECTION OF TAIL CONE APU AIR INTAKE
AREA (EWIS)
Access panels :
314AR
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 052310-200-003
MRB ZL-315-01-1
MRB 36.00.00/08
MRB 49.12.00/01-13
MRB 49.17.00/01-13
MRB 49.30.00/01-13
I 24 MO
ALL ZL-315-01-1 TAIL CONE APU - ACCESSORY COMPARTMENT 315 GVI
316
Y
GENERAL VISUAL INSPECTION OF TAIL CONE APU AND
ACCESSORY COMPARTMENT (EWIS)
WITH 131-9(A) APU
Access panels :
315AL
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052310/6
AMT 052310-200-003
MRB ZL-315-01-2
MRB 360000/08
MRB 491200/01-32
MRB 491700/01-32
MRB 493100/01-32
MRB 495100/01-32
I 24 MO
ALL ZL-315-01-2 TAIL CONE APU - ACCESSORY COMPARTMENT 315 GVI
316
Y
GENERAL VISUAL INSPECTION OF TAIL CONE APU AND
ACCESSORY COMPARTMENT (EWIS)
WITH APIC 3200 APU
Access panels :
315AL 316AR
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052310/6
AMT 052310-200-004
MRB ZL-317-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-317-01-1 TAIL CONE/APU EXHAUST AREA 317 GVI Y
GENERAL VISUAL INSPECTION OF TAIL CONE APU EXHAUST
AREA (EWIS)
Access panels :
317AL
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 052320/6
AMT 052330-200-001
MRB ZL-321-01-1
I 12 YE
ALL ZL-321-01-1 DORSAL FIN 321 GVI Y
GENERAL VISUAL INSPECTION OF DORSAL FIN (EWIS)
Access panels :
321AL
Skills :
AF 1 0.10 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052320/6
AMT 052320-200-002
MRB ZL-322-01-1
I 12 YE
ALL ZL-322-01-1 VERTICAL STABILIZER LEADING EDGE 322 GVI Y
GENERAL VISUAL INSPECTION OF VERTICAL STABILIZER
LEADING EDGE (EWIS)
Access panels :
322AL 322BL 322CL
Skills :
AF 1 0.30 MHrs
AMM 052320/6
AMT 052320-200-003
MRB ZL-323-01-1
I 12 YE
ALL ZL-323-01-1 VERTICAL STABILIZER SPAR BOX 323 GVI Y
GENERAL VISUAL INSPECTION OF VERTICAL STABILIZER SPAR
BOX (EWIS)
Access panels :
321AL 322BL 323AL 323AR 325AL 325AR
Skills :
AF 1 0.50 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052320/6
AMT 052320-200-004
MRB ZL-324-01-1
I 12 YE
ALL ZL-324-01-1 VERTICAL STABILIZER TIP 324 GVI Y R
TIP (EWIS)
NOTE: RII TASK
Access panels :
324AT
Skills :
AF 1 0.10 MHrs
AMM 052320/6
AMT 052320-200-005
MRB ZL-325-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-325-01-1 VERTICAL STABILIZER TRAILING EDGE 325 GVI Y
GENERAL VISUAL INSPECTION OF VERTICAL
STABILIZER TRAILING EDGE (EWIS)
Access panels :
325BL 325CL 325DL 325EL
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMT 052320-200-007
MRB ZL-325-02-1
MRB 27.21.00/08
MRB 553002-01-1
MRB 553007-01-1
MRB 554007-01-1
MRB 554007-01-2
I 6 YE
ALL ZL-325-02-1 VERTICAL STABILIZER TRAILING EDGE 325 GVI Y
TRAILING EDGE (EWIS)
Access panels :
325AL 325AR 325BL 325BR 325CL 325CR 325DL
325DR 325EL 325ER
Skills :
AF 1 0.40 MHrs
AMT 052320-200-006
MRB ZL-326-01-1
MRB 554002-01-1
MRB 554007-01-1
I 6 YE
ALL ZL-326-01-1 RUDDER 326 GVI Y
GENERAL VISUAL INSPECTION OF RUDDER (EWIS)
Access panels :
325AL 325AR 325BL 325BR 325CL 325CR 325DL
325DR 325EL 325ER 326AT
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052320/6
AMT 052320-200-008
MRB ZL-326-02-1
I 12 YE
ALL ZL-326-02-1 RUDDER 326 GVI Y
GENERAL VISUAL INSPECTION OF RUDDER (EWIS)
Access panels :
325AL 325AR 325BL 325BR 325CL 325CR 325DL
325DR 325EL 325ER 326AT
Skills :
AF 1 0.60 MHrs
AMM 052330/6
AMT 052330-200-001
MRB ZL-331-01-1
MRB 551015-01-1
I 6 YE
ALL ZL-331-01-1 THS LEADING EDGE 331 GVI
341
Y
GENERAL VISUAL INSPECTION OF TRIMMABLE HORIZONTAL
STABILIZER LEADING EDGE (EWIS)
Access panels :
331AB 331BB 331CB 341AB 341BB 341CB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052330/6
AMT 052330-200-002
MRB ZL-332-01-1
MRB 551015-01-1
I 12 YE
ALL ZL-332-01-1 THS TIP 332 GVI
342
Y R
STABILIZER TIP (EWIS)
NOTE: RII TASK
Access panels :
332AB 342AB
Skills :
AF 1 0.20 MHrs
AMM 052330/6
AMT 052330-200-003
MRB ZL-333-01-1
I 12 YE
ALL ZL-333-01-1 THS SPAR BOX 333 GVI
343
Y
STABILIZER SPAR BOX (EWIS)
PREP. : PEELABLE HOLE COVERS REMOVED;
Access panels :
312AR 314AR 331AB 331BB 331CB 332AB 333AB
333AT 334AB 334BB 334CB 334DB 334EB 334FB
334GB 334HB 341AB 341BB 341CB 342AB 343AB
343AT 344AB 344BB 344CB 344DB 344EB 344FB
344GB 344HB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052330/6
AMT 052330-200-004
MRB ZL-334-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-334-01-1 THS TRAILING EDGE 334 GVI
344
Y
Access panels :
334BB 334DB 334FB 334HB 344BB 344DB 344FB
344HB
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 052330/6
AMT 052330-200-007
MRB ZL-334-02-1
MRB 551016-01-1
MRB 551020-02-1
MRB 552003-01-1
I 6 YE
ALL ZL-334-02-1 THS TRAILING EDGE 334 GVI
344
Y
Access panels :
334AB 334AT 334BB 334BT 334CB 334CT 334DB
334DT 334EB 334FB 334GB 334HB 344AB 344AT
344BB 344BT 344CB 344CT 344DB 344DT 344EB
344FB 344GB 344HB
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052330/6
AMT 052330-200-005
MRB ZL-335-02-1
MRB 552002-02-1
MRB 552003-01-1
I 6 YE
ALL ZL-335-01-1 ELEVATOR 335 GVI
345
Y
GENERAL VISUAL INSPECTION OF ELEVATOR (EWIS)
Access panels :
334BB 334DB 334FB 334HB 335AB 335BB 335CB
335DB 344BB 344DB 344FB 344HB 345AB 345BB
345CB 345DB
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052400/6
AMT 052400-200-002
MRB ZL-400-02-2
MRB 236000/02
MRB 711100/01-I2
MRB 711100/02-I2
MRB 711300/01-I2
MRB 723100/02-I2
MRB 723100/02-I3
MRB 723280/02-I2
MRB 723280/03-I2
MRB 723285/01-I2
MRB 725000/02-I2
MRB 781000/03-I2
MRB 781000/05-I2
MRB 7832BB/03-I2
I 750 CY
I 4 MO
ALL ZL-400-02-2 POWER PLANT, NACELLES AND PYLONS 400 GVI Y
GENERAL VISUAL INSPECTION OF POWERPLANTS, NACELLES
AND PYLONS
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052410/6
AMT 052410-200-001
MRB ZL-411-01-1
MRB 360000/08
MRB 572031-02-1
I 20 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
ZL-411-01-1 UPPER FORWARD PYLON 411 GVI
413
414
421
423
424
Y
GENERAL VISUAL INSPECTION OF UPPER FWD PYLON (EWIS)
Access panels :
413AL 413BL 413CL 413DL 413EL 414AR 414AZ
414BR 414CR 414FR 423AL 423AZ 423BL 423CL
423DL 423FL 424AR 424BR 424CR 424ER
Skills :
EN 1 0.18 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052410/6
AMT 052410-200-001
MRB ZL-411-01-3
MRB 36.00.00/08
MRB 572031-02-1
I 20 MO
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
5392
ZL-411-01-3 UPPER FORWARD PYLON 411 GVI
413
414
421
423
424
Y R
GENERAL VISUAL INSPECTION OF UPPER FWD PYLON (EWIS)
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
413AL 413AR 413BL 413BR 413CL 413CR 413DT
414AZ 423AL 423AR 423AZ 423BL 423BR 423CL
423CR 423DT 471AL 471AR 481AL 481AR
Skills :
B2 1 0.00 MHrs
EN 1 0.18 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052410/6
AMT 052410-200-002
MRB ZL-415-01-2
I 20 MO
ALL ZL-415-01-2 LOWER PYLON 415 GVI
425
Y
GENERAL VISUAL INSPECTION OF LOWER PYLON (EWIS)
Access panels :
415AL 415AR 415BL 415BR 425AL 425AR 425BL
425BR
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
AMM 052430/6
AMT 052430-200-001
MRB ZL-433-01-2
MRB 302100/04
I 24 000 FH
I 6 YE
ALL ZL-433-01-2 AIR INTAKE LIP 433 GVI
434
443
444
Y
GENERAL VISUAL INSPECTION OF AIR INTAKE LIP (EWIS)
Access panels :
434AR 434BR 437AL 438AR 444AR 444BR 447AL
448AR
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052430/6
AMT 052430-200-002
MRB ZL-435-01-2
MRB 711100/03-I2
MRB 717000/01-I2
MRB 731000/02-I2
MRB 7832AA/03-I2
MRB 790000/04-I2
MRB 800000/04-I2
I 16 MO
ALL ZL-435-01-2 FAN AND ACCESSORY GEARBOX 435 GVI
436
445
446
Y
GENERAL VISUAL INSPECTION OF FAN AND ACCESSORY GEAR
BOX (EWIS)
Access panels :
437AL 438AR 447AL 448AR
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052430/6
AMT 052430-200-003
MRB ZL-437-01-2
MRB 711300/02
MRB 711300/02-I2
MRB 711300/03-I2
MRB 711300/04-I2
MRB 711300/05-I2
MRB 783200-01-4
I 16 MO
ALL ZL-437-01-2 FAN COWLING 437 GVI
438
447
448
Y
GENERAL VISUAL INSPECTION OF FAN COWL (EWIS)
Access panels :
437AL 438AR 447AL 448AR
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052450/6
AMT 052450-200-001
MRB ZL-451-01-2
MRB 752100/03-I2
MRB 7832AA/03-I2
MRB 7832BB/04-I2
MRB 7832BB/06-I2
MRB 783200-01-4
MRB 783200BB/08-I2
I 16 MO
ALL ZL-451-01-2 THRUST REVERSER COWLING 451 GVI
452
461
462
Y
GENERAL VISUAL INSPECTION OF THRUST REVERSER (EWIS)
PREP. : THRUST REVERSER DEPLOYED
Access panels :
451AL 452AR 461AL 462AR
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052450/6
AMT 052450-200-002
MRB ZL-453-01-2
MRB 360000/08
MRB 717000/01-I2
MRB 724000/02-I2
MRB 731000/02-I2
MRB 75.23.00/01-I2
MRB 752400/02-I2
MRB 752400/03-I2
MRB 753200/01-I2
MRB 781000/04-I2
MRB 781000/05-I2
MRB 781000/06-I2
MRB 7832BB/08-I2
MRB 790000/04-I2
I 16 MO
ALL ZL-453-01-2 HOT SECTION 453 GVI
454
463
464
Y
GENERAL VISUAL INSPECTION OF HOT SECTION (EWIS)
Access panels :
451AL 452AR 452DR 452ER 461AL 462AR 462DR
462ER
Skills :
B2 1 0.00 MHrs
EN 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052470/6
AMT 052470-200-001
MRB ZL-471-01-2
MRB 572031-02-1
MRB 572042-01-5
MRB 572047-02-2
MRB 572057-02-1
SIL 54-023
I 20 MO
2255
2261
2267
2303
2480
2974
3005
3013
3022
3198
3315
3355
ZL-471-01-2 PYLON LEADING EDGE AND LOWER FAIRING NT GVI Y
GENERAL VISUAL INSPECTION OF PYLON LEADING EDGE AND
LOWER FAIRING (EWIS)
Access panels :
471AL 471BL 471CL 472AR 472BR 473AL 475AL
475BL 475CL 476AR 476BR 476CR 477AL 481AL
481BL 482BR 482CR 483AL 485AL 485BL 485CL
486AR 486BR 486CR 487AR
Skills :
EN 1 0.36 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052470/6
AMT 052470-200-001
MRB ZL-471-01-5
MRB 572031-02-1
MRB 572042-01-5
MRB 572047-02-2
MRB 572057-02-1
SIL 54-023
I 20 MO
3600
3737
3862
3964
3966
4136
4213
4277
4311
4315
4669
4703
4737
4783
4826
4863
4945
4971
5164
5241
5247
5251
5275
5297
5306
5340
5343
5385
ZL-471-01-5 PYLON LEADING EDGE AND LOWER FAIRING NT GVI Y R
GENERAL VISUAL INSPECTION OF PYLON LEADING EDGE AND
LOWER FAIRING (EWIS)
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
5392
5418
5427
5438
5456
5469
5495
5555
5699
5709
5916
5958
5994
Access panels :
471BL 471BR 471CL 471CR 471DL 473AL 475AL
475AR 475BL 475BR 477AL 481BL 481BR 481CL
481CR 481DR 483AL 485AL 485AR 485BL 485BR
487AR
Skills :
B2 1 0.00 MHrs
EN 1 0.36 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052500/6
AMT 052500-200-002
MRB ZL-500-02-1
MRB 23.60.00/02
MRB 36.00.00/07
MRB 572031-02-1
MRB 572059-01-1
MRB 572166-01-1
MRB 574207-01-1
MRB 574307-01-1
MRB 574407-01-1
MRB 574507-01-1
MRB 574607-01-1
MRB 575158-01-3
MRB 575158-01-4
MRB 575161-01-4
MRB 575162-01-3
MRB 575201-01-1
MRB 575221-01-2
MRB 575251-02-1
MRB 575301-01-1
MRB 575321-01-1
MRB 575351-02-1
MRB 576104-02-1
MRB 576106-02-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-500-02-1 WING LOWER SURFACE 500 GVI
600
Y
GENERAL VISUAL INSPECTION OF WING LOWER SURFACE
INCLUDING UPPER AND LOWER SURFACES OF SLATS AND
FLAPS (EWIS)
PREP. : FLAPS EXTENDED
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052500/6
AMT 052500-200-003
MRB ZL-500-03-1
MRB 572058-01-1
MRB 572165-01-1
MRB 574207-01-1
MRB 574307-01-1
MRB 574407-01-1
MRB 574507-01-1
MRB 574607-01-1
MRB 575155-01-3
MRB 575201-01-1
MRB 575221-01-2
MRB 575301-01-1
MRB 575321-01-1
MRB 576104-02-1
MRB 576106-02-1
MRB 577002-02-1
MRB 577003-02-1
MRB 577007-02-1
MRB 577008-02-1
MRB 577009-02-1
I 48 MO
2C Check :
ALL ZL-500-03-1 WING UPPER SURFACE 500 GVI
600
Y
GENERAL VISUAL INSPECTION OF WING UPPER SURFACE
INCLUDING SLATS, FLAPS AND SPOILERS
SPOILERS EXTENDED
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052520/6
AMT 052520-200-001
MRB ZL-521-01-1
MRB 30.11.00/01
MRB 36.00.00/08
MRB 572654-02-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-521-01-1 INBOARD FIXED LEADING EDGE STRUCTURE 521 GVI
621
Y
GENERAL VISUAL INSPECTION OF INBOARD FIXED LEADING
EDGE STRUCTURE (EWIS)
Access panels :
521AB 521AT 521BT 521CB 521EB 521GB 521HB
621AB 621AT 621BT 621CB 621EB 621GB 621HB
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
AMM 052520/6
AMT 052520-200-002
MRB ZL-522-01-1
MRB 30.11.00/01
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-522-01-1 OUTBOARD FIXED LEADING EDGE STRUCTURE 522 GVI
622
Y
GENERAL VISUAL INSPECTION OF OUTBOARD FIXED LEADING
EDGE STRUCTURE (EWIS)
Access panels :
522AB 522AT 522BT 522CB 522EB 522FB 522HB
522JB 522KB 522LB 522NB 522QB 522SB 522UB
622AB 622AT 622BT 622CB 622EB 622FB 622HB
622JB 622KB 622LB 622NB 622QB 622SB 622UB
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052530/6
AMT 052530-200-001
MRB ZL-531-01-1
MRB 275000/10
MRB 275000/11
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-531-01-1 FLAP TRACK NO.2 FAIRING 531 GVI
631
Y
GENERAL VISUAL INSPECTION OF FLAP TRACK NO.2
AND FAIRING (EWIS)
Access panels :
531AT 631AT
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052530/6
AMT 052530-200-005
MRB ZL-531-02-2
MRB 572036-02-2
MRB 575165-02-2
I 6 YE
631
Y
AND FAIRING (EWIS)
Access panels :
531AL 531AR 531AT 531CB 531DB 531EB 531FB
631AL 631AR 631AT 631CB 631DB 631EB 631FB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052530/6
AMT 052530-200-002
MRB ZL-532-01-1
MRB 275000/10
MRB 275000/11
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
632
Y
AND FAIRING (EWIS)
Access panels :
532AT 632AT
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052530/6
AMT 052530-200-006
MRB ZL-532-02-2
MRB 572143-02-2
MRB 572150-02-2
I 6 YE
632
Y
AND FAIRING (EWIS)
Access panels :
532AL 532AR 532AT 532CB 532DB 532EB 532FB
632AL 632AR 632AT 632CB 632DB 632EB 632FB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052530/6
AMT 052530-200-003
MRB ZL-533-01-1
MRB 275000/10
MRB 275000/11
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
633
Y
AND FAIRING (EWIS)
Access panels :
533AT 633AT
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052530/6
AMT 052530-200-007
MRB ZL-533-02-2
MRB 572143-02-2
MRB 572151-02-2
I 6 YE
633
Y
AND FAIRING (EWIS)
Access panels :
533AL 533AR 533AT 533CB 533DB 533EB 533FB
633AL 633AR 633AT 633CB 633DB 633EB 633FB
Skills :
AF 1 0.60 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052530/6
AMT 052530-200-004
MRB ZL-534-01-2
MRB 573101-02-1
I 72 MO
ALL ZL-534-01-2 WING TIP 534 GVI
634
Y
GENERAL VISUAL INSPECTION OF WING TIP (EWIS)
Access panels :
534AB 534AL 534BL 634AB 634AL 634BL
Skills :
AF 1 0.20 MHrs
AMM 052530/6
AMT 052530-200-009
MRB ZL-536-01-1
MRB 275000/11
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-536-01-1 FLAP TAB HINGE FAIRING NO. 1B 536 GVI
636
Y
FAIRING NO. 1B (EWIS)
Access panels :
536AB 536BB 636AB 636BB
Skills :
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052540/6
AMT 052540-200-005
MRB ZL-540-01-2
MRB 572019-02-1
MRB 572024-02-1
MRB 572056-01-1
I 6 YE
ALL ZL-540-01-2 WING FUEL TANK 540 GVI
640
Y
GENERAL VISUAL INSPECTION OF WING FUEL TANK (EWIS)
NOTE: INTERVAL MAY BE ADJUSTED BY INDIVIDUAL
OPERATORS IN CONSIDERATION OF THEIR OWN
INSERVICE EXPERIENCE AND OPERATIONAL
ENVIRONMENT.
Access panels :
540AB 540AZ 540BZ 640AB 640AZ 640BZ
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052540/6
AMT 052540-200-004
MRB ZL-540-02-2
MRB 28.11.00/05
MRB 28.11.00/06
MRB 28.21.00/07
MRB 572004-02-1
MRB 572011-02-1
MRB 572027-02-1
MRB 572028-02-1
MRB 572050-03-2
MRB 572060-01-1
MRB 572061-01-1
MRB 572108-02-1
MRB 572114-02-1
MRB 572126-02-1
MRB 572167-01-1
MRB 572168-01-1
I 12 YE
ALL ZL-540-02-2 WING FUEL TANK 540 GVI
640
Y
GENERAL VISUAL INSPECTION OF WING FUEL TANK (EWIS)
NOTE: ALTERNATIVE COMPLIANCE FOR THE DRY BAY AREA IS
SHOWN BY PERFORMING TASKS 572050-02-1, 572050-02-2,
572050-02-4, 572050-02-5 AND 572050-02-6 AT THE SAME
TIME. ACCESS PANELS 540/640CZ AND 540/640DZ NEED NOT
TO BE REMOVED IN THIS CASE
Access panels :
521AZ 521BZ 540AB 540AZ 540BB 540BZ 540CB
540CZ 540DB 540DZ 540EB 540FB 540GB 540HB
540JB 540KB 540LB 540MB 540NB 540PB 540QB
540RB 621AZ 621BZ 640AB 640AZ 640BB 640BZ
640CB 640CZ 640DB 640DZ 640EB 640FB 640GB
640HB 640JB 640KB 640LB 640MB 640NB 640PB
640QB 640RB
Skills :
AF 1 3.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052550/6
AMT 052550-200-001
MRB ZL-550-01-1
MRB 572109-02-1
MRB 572115-02-1
MRB 572126-02-1
MRB 572167-01-1
MRB 572168-01-1
I 12 YE
ALL ZL-550-01-1 VENT SURGE TANK 550 GVI
650
Y
GENERAL VISUAL INSPECTION OF VENT SURGE TANK (EWIS)
Access panels :
550AB 550BB 550CB 550DB 650AB 650BB 650CB
650DB
Skills :
AF 1 0.60 MHrs
AMM 052560/6
AMT 052560-200-001
MRB ZL-560-01-1
MRB 572109-02-1
MRB 572115-02-1
MRB 572126-02-2
MRB 572167-01-1
MRB 572168-01-1
I 12 YE
ALL ZL-560-01-1 DRY BAY 560 GVI
660
Y
GENERAL VISUAL INSPECTION OF DRY BAY
(OUTBOARD) (EWIS)
Access panels :
560AB 660AB
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052570/6
AMT 052570-200-006
MRB ZL-571-02-1
MRB 291000/21
MRB 572652-01-1
I 15 000 FH
I 10 000 CY
I 48 MO
2C Check :
ALL ZL-571-02-1 MAIN LANDING GEAR 571 GVI
671
Y
GENERAL VISUAL INSPECTION OF MLG BAY (EWIS)
Skills :
AF 1 0.40 MHrs
AMM 052570/6
AMT 052570-200-002
MRB ZL-572-01-2
I 15 000 FH
I 10 000 CY
I 48 MO
2C Check :
ALL ZL-572-01-2 SHROUD BOX 572 GVI
672
Y
GENERAL VISUAL INSPECTION OF SHROUD BOX (EWIS)
Access panels :
571AB 671AB
Skills :
AF 1 0.20 MHrs
AMM 052570/6
AMT 052570-200-003
MRB ZL-573-01-1
MRB 575151-02-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-573-01-1 INBOARD FIXED TRAILING EDGE STRUCTURE 573 GVI
673
Y
GENERAL VISUAL INSPECTION OF INBOARD FIXED TRAILING
EDGE STRUCTURE FROM SHROUD BOX TO RIB 9 (EWIS)
SPOILERS EXTENDED
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052570/6
AMT 052570-200-004
MRB ZL-574-01-1
MRB 291000/21
MRB 575151-02-1
MRB 575163-02-1
I 24 MO
C Check :
ALL ZL-574-01-1 FALSE SPAR BOX 574 GVI
674
Y
GENERAL VISUAL INSPECTION OF FALSE SPAR BOX (EWIS)
Access panels :
573AB 573BB 573CB 573DB 573EB 574AB 574BB
673AB 673BB 673CB 673DB 673EB 674AB 674BB
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052570/6
AMT 052570-200-005
MRB ZL-575-01-1
MRB 576102-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-575-01-1 OUTBOARD FIXED TRAILING EDGE STRUCTURE 575 GVI
675
Y
GENERAL VISUAL INSPECTION OF OUTBOARD FIXED TRAILING
EDGE STRUCTURE FROM RIB 9 TO RIB 27 (EWIS)
SPOILERS EXTENDED;
Access panels :
575AT 575KB 575LB 575MB 675AT 675KB 675LB
675MB
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052590/6
AMT 052590-200-001
MRB ZL-590-01-1
I 15 000 FH
I 10 000 CY
I 48 MO
2C Check :
ALL ZL-590-01-1 AILERON 590 GVI
690
Y
GENERAL VISUAL INSPECTION OF AILERON (EWIS)
Access panels :
590AB 590BB 690AB 690BB
Skills :
AF 1 0.20 MHrs
AMM 052710/6
AMT 052710-200-001
MRB ZL-711-01-1
MRB 528212-01-1
MRB 528222-01-1
I 4 MO
ALL ZL-711-01-1 NOSE GEAR NT GVI Y
GENERAL VISUAL INSPECTION OF NOSE GEAR AND NOSE GEAR
DOORS (EWIS)
NOTE: WORKING ZONES 711, 712, 713, 714, 715, 716
Access panels :
713 714
AMM 052730/6
AMT 052730-200-001
MRB ZL-731-01-1
I 4 MO
741
N
GENERAL VISUAL INSPECTION OF LH/RH MAIN LANDING
GEAR (EWIS)
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052730/6
AMT 052730-200-002
MRB ZL-732-01-1
I 4 MO
742
N
GENERAL VISUAL INSPECTION OF MAIN LANDING GEAR
CYLINDER DOOR (EWIS)
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052730/6
AMT 052730-200-003
MRB ZL-733-01-1
I 4 MO
743
N
GENERAL VISUAL INSPECTION OF MAIN LANDING GEAR
SECONDARY DOOR (EWIS)
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052730/6
AMT 052730-200-004
MRB ZL-734-01-1
MRB 528105-01-1
I 4 MO
744
N
GENERAL VISUAL INSPECTION OF MAIN LANDING GEAR MAIN
DOORS (EWIS)
Access panels :
734 744
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052810/6
AMT 052810-200-001
MRB ZL-811-01-1
MRB 524112-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-811-01-1 FWD AVIONICS COMPARTMENT DOOR 811 GVI Y
GENERAL VISUAL INSPECTION OF FWD AVIONICS COMPARTMENT
DOOR (EWIS)
(INCLUDING EXTERNAL SURFACE)
Access panels :
811
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 052810/6
AMT 052810-200-002
MRB ZL-811-02-1
I 12 YE
ALL ZL-811-02-1 FWD AVIONICS COMPARTMENT DOOR 811 GVI Y
GENERAL VISUAL INSPECTION OF FWD AVIONICS COMPARTMENT
DOOR (EWIS)
PREP. : DOOR PANELS REMOVED
Access panels :
811
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052810/6
AMT 052810-200-003
MRB ZL-812-01-1
MRB 524132-01-1
MRB 524142-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-812-01-1 LATERAL AVIONICS COMPARTMENT DOOR 812 GVI
822
Y
GENERAL VISUAL INSPECTION OF LATERAL AVIONICS
COMPARTMENT DOORS (EWIS)
Access panels :
812 822
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052810/6
AMT 052810-200-004
MRB ZL-812-02-1
I 12 YE
ALL ZL-812-02-1 LATERAL AVIONICS COMPARTMENT DOOR 812 GVI
822
Y
GENERAL VISUAL INSPECTION OF LATERAL AVIONICS
COMPARTMENT DOORS (EWIS)
Access panels :
812 822
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052820/6
AMT 052820-200-007
MRB ZL-824-01-1
MRB 524122-01-1
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-824-01-1 REAR AVIONICS COMPARTMENT DOOR 824 GVI Y
GENERAL VISUAL INSPECTION OF REAR AVIONIC COMPARTMENT
DOOR (EWIS)
Access panels :
824
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 052820/6
AMT 052820-200-008
MRB ZL-824-02-1
I 12 YE
ALL ZL-824-02-1 REAR AVIONICS COMPARTMENT DOOR 824 GVI Y
GENERAL VISUAL INSPECTION OF REAR AVIONIC COMPARTMENT
DOOR (EWIS)
Access panels :
824
Skills :
AF 1 0.40 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052820/6
AMT 052820-200-001
MRB ZL-825-01-1
MRB 523101-01-2
I 4 MO
ALL ZL-825-01-1 FORWARD CARGO COMPARTMENT DOOR 825 GVI N
GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT
DOOR INCLUDING FUSELAGE DOOR SILL, DOOR SEAL AND LOCK
FITTINGS, EXTERNAL SURFACE (EWIS)
Access panels :
825
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 052820/6
AMT 052820-200-004
MRB ZL-825-02-1
I 12 YE
ALL ZL-825-02-1 FORWARD CARGO COMPARTMENT DOOR 825 GVI Y
GENERAL VISUAL INSPECTION OF FWD CARGO COMPARTMENT
DOOR (EWIS)
Access panels :
825 825AR
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052820/6
AMT 052820-200-002
MRB ZL-826-01-1
MRB 523111-01-2
I 4 MO
ALL ZL-826-01-1 AFT CARGO COMPARTMENT DOOR 826 GVI N
DOOR INCLUDING FUSELAGE DOOR SILL, DOOR SEAL AND LOCK
FITTINGS (EWIS)
Access panels :
826
Skills :
AF 1 0.10 MHrs
B2 1 0.00 MHrs
AMM 052820/6
AMT 052820-200-005
MRB ZL-826-02-1
I 12 YE
ALL ZL-826-02-1 AFT CARGO COMPARTMENT DOOR 826 GVI Y
DOOR (EWIS)
Access panels :
826 826AR
Skills :
AF 1 0.30 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052820/6
AMT 052820-200-003
MRB ZL-827-01-1
MRB 523301-01-2
I 4 MO
ALL ZL-827-01-1 BULK CARGO COMPARTMENT DOOR 827 GVI N
DOOR INCLUDING DOOR STOPS ON FUSELAGE DOOR
FRAME (EWIS)
Access panels :
827
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052820/6
AMT 052820-200-006
MRB ZL-827-02-1
I 12 YE
ALL ZL-827-02-1 BULK CARGO COMPARTMENT DOOR 827 GVI Y
DOOR (EWIS)
Access panels :
827
Skills :
AF 1 0.20 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052830/6
AMT 052830-200-001
MRB ZL-831-01-1
MRB 521103-01-2
MRB 521303-01-2
I 4 MO
ALL ZL-831-01-1 FWD AND AFT PASSENGER/CREW DOOR 831 GVI
832
841
842
Y
GENERAL VISUAL INSPECTION OF FWD AND AFT
PASSENGER/CREW DOORS INCLUDING DOOR STOPS ON FUSELAGE
DOOR FRAMES AND DOOR SEALS, EXTERNAL SURFACE (EWIS)
Access panels :
831 832 841 842
Skills :
AF 1 0.20 MHrs
B2 1 0.00 MHrs
AMM 052830/6
AMT 052830-200-005
MRB ZL-831-02-1
I 12 YE
ALL ZL-831-02-1 FWD AND AFT PASSENGER/CREW DOOR 831 GVI
832
841
842
Y
GENERAL VISUAL INSPECTION OF FWD AND AFT
PASSENGER/CREW DOORS (EWIS)
Access panels :
831 831AZ 831BZ 831CZ 831DZ 831EZ 831FZ
831GZ 832 832AZ 832BZ 832CZ 832DZ 832EZ
832FZ 832GZ 841 841AZ 841BZ 841CZ 841DZ
841EZ 841FZ 841GZ 842 842AZ 842BZ 842CZ
842DZ 842EZ 842FZ 842GZ
Skills :
AF 1 0.80 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052830/6
AMT 052830-200-007
MRB ZL-833-02-2
I 6 YE
ALL ZL-833-02-2 FORWARD AND AFT EMERGENCY EXIT 833 GVI
834
843
844
Y
GENERAL VISUAL INSPECTION OF FWD AND AFT EMERGENCY
EXITS (EWIS)
Access panels :
833 833CZ 833DZ 833EZ 833FZ 833GZ 833HZ
834 834CZ 834DZ 834EZ 834FZ 834GZ 834HZ
843 843CZ 843DZ 843EZ 843FZ 843GZ 843HZ
844 844CZ 844DZ 844EZ 844FZ 844GZ 844HZ
Skills :
AF 1 0.60 MHrs
AMM 052830/6
AMT 052830-200-009
MRB ZL-833-03-1
MRB 522201-01-2
MRB 522204-01-2
I 4 MO
ALL ZL-833-03-1 FORWARD AND AFT EMERGENCY EXIT 833 GVI
834
843
844
Y
EXITS - EXTERNAL SKIN (EWIS)
Skills :
AF 1 0.60 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
AMM 052830/6
AMT 052830-200-011
MRB ZL-833-04-1
MRB 522200/05
I 7 500 FH
I 5 000 CY
I 24 MO
C Check :
ALL ZL-833-04-1 FWD AND AFT EMERGENCY EXITS (INCLUDING 833 GVI
834
843
844
Y
DOOR STOPS ON FUSELAGE DOOR FRAMES)
EXITS INCLUDING DOOR STOPS ON FUSELAGE DOOR
FRAMES (EWIS)
Access panels :
833 843
Skills :
AF 1 0.40 MHrs
B2 1 0.00 MHrs
:
:
:
:
:
14
12/09/2013
01

Date : SEP 2013 LIST OF EFFECTIVE PAGES - ECO Page : 1

LEP R 1 SEP 2013

CHAPTER : 12 SERVICING (LUBRICATION)
Task
code
Threshold
Interval
Ctrl References Eff
AMT 122111-615-072 I 30 DY
See note
ALL 12-ECO-00 EXTERNAL CLEANING A/C CLN N
PERFORM WASHING AIRCRAFT
AMM 122111-615-002 I 7 500 FH
I 24 MO
C Check :
ALL 12-ECO-01 EXTERNAL CLEANING A/C CLN N
C/O THE AIRCRAFT EXTERNAL CLEANING
Skills :
B2 1 0.00 MHrs
Amendment No Issue No Page ECO - 12 [1 / 1] :
:
:
:
:
:
14
12/09/2013
01
Task
code
Threshold
Interval
Ctrl References Eff
I 12 MO
ALL 31-ECO-01-1 DIGITAL FLIGHT DATA RECORDING SYSTEM 210 OP N R
DOWNLOAD AND RECORD DFDR DATA.
NOTE 1: TASK MAY BE COMBINED WITH TASK 31-ECO-01-2
NOTE 2: INCASE OF TASK THRESHOLD IS OVERDUE WHEN AMS ISSUE 14 AMD 00 IS
EFFECTIVE THE TASK THRESHOLD IS NEXT 2A CHECK.
I 12 MO
ALL 31-ECO-01-2 READ OUT DFDR DATA 200 *** N
READ OUT OF DFDR DATA TO ENSURE RECORDED
PARAMETERS MEET THE RANGE AND ACCURACIES REQUIRED IN
"BO QUY CHE AN TOAN HANG KHONG DAN DUNG LINH VUC TAU BAY
VA KHAI THAC TAU BAY"
NOTE 1: TASK MAY BE COMBINED WITH TASK 31-ECO-01-1
NOTE 2: INCASE OF TASK THRESHOLD IS OVERDUE WHEN AMS ISSUE 14 AMD 00 IS
EFFECTIVE THE TASK THRESHOLD IS NEXT 2A CHECK.
:
:
:
:
:
14
12/09/2013
01
CHAPTER : 72 ENGINE
Task
code
Threshold
Interval
Ctrl References Eff
AMT 720000-100-010 I 1 500 FH
ALL 72-ECO-00 CLEAN THE ENGINE GAS PATH 400 CLN N
CLEAN THE ENGINE GAS PATH FOR PERFORMANCE
IMPROVEMENT (WATER ONLY)
Skills :
B2 1 0.00 MHrs
EN 4 8.00 MHrs
:
:
:
:
:
14
12/09/2013
01


SECTION 5

SPECIAL PROCEDURES


5 LEP R 1 SEP 2013
5 TOC R 1 SEP 2013
5.0 GENERAL INTRODUCTION N 1 SEP 2013
5.1 UNSCHEDULE MAINTENANCE CHECKS AND
INSPECTIONS
N 1 SEP 2013
5.1 UNSCHEDULE MAINTENANCE CHECKS AND
INSPECTIONS
N 2 SEP 2013
5.2 PARKING / STORAGE PROCEDURES N 1 SEP 2013
5.2 PARKING / STORAGE PROCEDURES N 2 SEP 2013
5.3 COLD WEATHER MAINTENANCE PROCEDURE N 1 SEP 2013
5.4 A321 CRITICAL DESIGN CONFGURATION CONTROL
LIMITATION
N 1 SEP 2013

ISSUE: SEP 2013 SECTION 5 - LEP PAGE 1


SECTION 5
SPECIAL PROCEDURES

TABLE OF CONTENTS

SUBJECT

GENERAL
SUB-SECTION 5.1: UNSCHEDULE MAINTENANCE CHECKS AND INSPECTIONS.
SUB-SECTION 5.2: PARKING / STORAGE PROCEDURES.
SUB-SECTION 5.3: COLD WEATHER MAINTENANCE PROCEDURE.
SUB-SECTION 5.4: A321 CRITICAL DESIGN CONFGURATION CONTROL LIMITATION

ISSUE: SEP 2013 SECTION 5 - TOC PAGE 1


SECTION 5
SPECIAL PROCEDURES

ISSUE: SEP 2013 SECTION 5 SPECIAL PROCEDURES PAGE 1
GENERAL

This section of the Aircraft Maintenance Schedule is built in order to refer to the AMM
tasks or procedure of the aircraft manufacturer which they are considered to be as the
special maintenance procedures. This section covers:

- Unscheduled maintenance checks and inspections.
- Packing, storage and procedures.
- Cold weather maintenance procedure.
- Critical Design Configuration Control Limitations (CDCCL)

A. Sub-section 5.1- Unscheduled maintenance checks and inspections

Unscheduled maintenance checks includes procedures, instructions, and standards
for maintenance that occurs on an unscheduled or unforeseen basis. A need for
unscheduled maintenance may result from scheduled maintenance tasks, pilot
reports, or unforeseen events such as hard or overweight landings, tail strikes,
lightning strikes, or engine over temperature...ect

This sub-section is built up as the cross-reference table, in which consists of the
following causes abnormal may occurs during the operation or maintenance of
aircraft and the corresponding procedures.

Those inspections that are necessary after an incident, flight in abnormal
conditions, abnormal operation or repair and will, in most cases, be called for as a
result of flight crew report or maintenance report. Unless specified differently, the
technical staff must do these inspections before the subsequent flight of the aircraft.
If there is no inspection in this sub-section applicable to the incident or abnormal
flight conditions that occurred, VNA or aircraft maintenance bases VNA must tell
Airbus and make a request for more instructions.

B. Sub-section 5.2 - Parking and storage procedures

These procedures need to be done for care and protection of aircraft in case of
decommissions and stay on ground (AOG) for short or long terms, the instructions
in those procedures necessary to park or store the aircraft in normal or abnormal
conditions.
Airbus give precise guidelines for handling parked aircraft in an aircraft
maintenance manual (AMM), therefore, Parking and storage procedures are given
in the form of AMM tasks in this sub-section.

During storage or parking periods, do not stop or change the maintenance program
without CAAV approval. The maintenance calendar clock continues during these
periods. However, if the AMM storage or parking procedures are done correctly,


SECTION 5
SPECIAL PROCEDURES

and if you have the approval of CAAV, it is not necessary to do all the scheduled
maintenance tasks (such as AMS tasks) immediately during storage/packing
period. You can wait until the end of the period to do them all before the next flight.

The Parking procedure can drawn up for the decommissioning of an aircraft for a
period of up to twelve weeks, the Storage procedure can be taken when an aircraft
is decommissioned for up to two years. Depending on the requirement or purpose
in each particular case, normal or abnormal conditions, the length of time of the
decommissioning or AOG, which procedure can be applied, or apply one after the
other procedure in accordance with the respective period of each procedure.

1. Parking procedure:
This procedure is to keep the aircraft in flight-ready condition during the parking
period, which means it can be returned to the operative fleet within a
comparatively short time.
Parking procedure would be start with an aircraft remain on the ground for more
than two days. And it is divided into two sub-procedure corresponding to the two
period is not more than 15 days and not more than 12 weeks.

Each sub-procedure consists of three different work packages: A procedure for
parking the aircraft in flight-ready condition, then the related tasks to do periodic
ground check during parking, and finally there is a work package to return to
operation or to do again the parking procedure.

Note:
- The parking procedure period of not more than 15 days can do again one
time only.
- The procedure for the renewal of the 12-week parking period includes a non-
revenue flight procedure within the aircraft standard envelope.

2. Storage procedure:
This procedure gives the preservation steps for a storage periods, and is often
applied in the case of aircraft is not ready to fly condition or decommission for a
long term.
J ust like parking procedures, this procedure is divided into two sub-procedures
also, procedure for a period of not more than six months and more than two
years. Each sub-procedure comprises: a storage procedure, various periodic
ground checks, and return to operation after storage period or renewal for six
months / two years Storage Period.
Note:
- The procedure to store the aircraft not more than six months can do again
one time only.
- The procedure for the renewal of two years storage Period includes a non-
revenue flight procedure within the aircraft standard envelope.


SECTION 5
SPECIAL PROCEDURES

C. Sub-section 5.3 - Cold weather maintenance procedure.

This procedure supply a work package to keep aircraft operation safety in
cold weather conditions, aircraft downtime and delays in flight schedules caused by
cold weather problems can be minimized by a program of preventive cold weather
servicing.
The aircraft need to carry out this procedure if it is in cold soak configuration when:

1. It is parked in cold weather (Outside Air Temperature (OAT) lower than 0
deg.C (32.00 deg.F) ) and
2. There is no supply of power to the aircraft (no air conditioning).

This procedure also presents a form of reference AMM task.

D. Sub-section 5.4 - Cri ti cal Desi gn Configurati on Control Li mi tations (CDCCL)

A CDCCL is a limitation requirement to preserve either a critical ignition source
prevention feature of the fuel system design or a critical design feature of the
flammability reduction system that is necessary to prevent the occurrence of an
unsafe condition. The purpose of the CDCCL is to provide instructions to retain the
critical ignition source prevention or critical flammability reduction feature during
configuration change that may be caused by alterations, repairs, or maintenance
actions.

A critical ignition source prevention feature may exist in the fuel system and related
Installation or in systems that, if a failure condition were to develop, could interact with
the fuel system in such a way that an unsafe condition would develop in the fuel
system without this limitation.

A critical feature that contributes to the integrity of the flammability reduction system
may exist in the fuel tank inerting system and related installation that, if not maintained,
could compromise the design and lead to an unsafe condition in the fuel system.

VAECO are responsible for ensuring that their internal documentation is amended to
reflect the data contained within this sub-section and provides appropriate text to
highlight the existence of each CDCCL. Such identification is necessary in the
instructions used by the person who will be performing an installation, alteration, repair
or modification so as to minimize the risk that the work performed compromises the
original design criteria.
This sub-section is quoted from ALS part 5 section 2 and collated the reference with
aircrafts configuration. The mandatory requirements are based on the appropriate
identification of the CDCCL in the accomplishment instructions associated with the
installation, alteration, repair or modification (Reference and Applicability column).


SECTION 5
SPECIAL PROCEDURES

ISSUE: SEP 2013 SUB-SECTION 5.1 UNSCHEDULE MAINT CHK&INSP PAGE 1
SUB-SECTION 5.1
UNSCHEDULE MAINTENANCE CHECKS AND INSPECTIONS

ITERM

INSPECTIONS
AFTER

DESCRIPTION

REFERENCE

1
Airframe vibration / noise in
flight
Identification of the Cause of
In-Flight Airframe Vibrations
and/or Noises.
TSM
05-50-00-810-801
2 Heavy landing
Inspection After
Hard/Overweight Landing.
AMM
05-51-11-200-004
3
the landing gear
extends/retracts at more
than the Geardown Limiting
Speed
Inspection after Landing Gear
Extension at more than the
Geardown Limiting Speed
AMM
05-51-12-200-001
4 overspeed warning
Inspection after Flap/Slat
Extension at more than the
Flap/Slat Limiting Speed
AMM
05-51-13-200-001
5 Airframe Bird / Hail Strike
Inspection of the Airframe after
a Bird or Hail Strike.
AMM
05-51-14-200-001
6 Wheel / tyre failure
Inspection after a Tire Burst or
Tread Throw.
AMM
05-51-15-200-001
7 Brake Overheat
Inspection After Brake
Overheat
AMM
05-51-16-200-001
8
Excessive Load Factor in
flight
Inspection after in Flight
Excessive Load Factor due to
Turbulence or Maneuver or in
Excess of VMO/MMO
AMM
05-51-17-200-001
9 Lightning strike
Inspection after Lightning
Strike.
AMM
05-51-18-200-001
10 Engine bird strike
Inspection of the Engine after a
Bird Strike or Slush Ingestion.
AMM
05-51-19-200-001
11 Tail Runway Impact
Inspection after a Tail Runway
Impact.
AMM
05-51-21-200-001
12
NLG Towing Overload /
Overrun
Inspection After a NLG Towing
Overload or Overrun.
AMM
05-51-22-200-001
13
NLG Steering Angle
exceedance
Inspection after NLG Steering
Angle of more than 95 deg.
AMM
05-51-23-200-001
14
Aircraft spring out Runway /
taxiway during taxi, takeoff
or landing.
Inspection after Leaving
Runway or Taxiway.
AMM
05-51-24-200-001
15
Flight through Dust Storm /
Volcanic Ash / Severe
Conditions on Ground
- Inspection after Flight through
Dust Storm or Dust
Contamination on Ground.
- Inspection after Flight through
Volcanic Ash or Volcanic Ash
AMM
05-51-25-200-002

AMM
05-51-25-200-003


SECTION 5
SPECIAL PROCEDURES

ISSUE: SEP 2013 SUB-SECTION 5.1 UNSCHEDULE MAINT CHK&INSP PAGE 2

ITERM

INSPECTIONS
AFTER

DESCRIPTION

REFERENCE

Contamination on Ground.
16 Engine failure Inspection after engine failure
AMM
05-51-26-200-001
17 Impact on Engine Cowls
Inspection after Impact on
Engine Cowls
AMM
05-51-27-200-001
18
Fluid spillage in cargo
compartment
Procedure after Fluid Spillage
AMM
05-51-28-200-002
19
Pax / crew doors abnormal
movement
Inspection after Abnormal
Movement of the Pax/Crew or
Emergency Exit
AMM
05-51-29-200-001
20
Significant MLG vibration at
touch-down
Inspection after Significant
MLG Vibration at Touch-Down
AMM
05-51-31-200-001
21 Engine Shut-Down in flight
Inspection after Engine
Windmilling (After Engine In-
Flight Shut-Down)
AMM
05-51-34-200-001
22 Impact on Wing Tip/Fence
Inspection after Impact on
Wing Tip/Fence
AMM
05-51-35-200-001
23 Overweight Taxiing
Inspection after taxiing at a
weight that is more than the
Maximum design Taxi Weight
(MTW)
AMM
05-51-41-200-001
24
The aircraft was in very
high winds on the ground
(wind speed of more than
80 knots (150 KM/H))
Inspection after Very High
Winds on Ground
AMM
05-51-42-200-001
25
Work on System Electrical
Installation
Inspection after Work on
System Electrical Installation
AMM
05-51-43-700-001
26
Aircraft Operation with High
Lateral Acceleration
Inspection after Aircraft
Operation with High Lateral
Acceleration
AMM
05-51-44-200-001
27 Fluid leak Leaks Permitted values
AMM
05-50-00-790-001
28
Abnormal sign during take-
off
Lateral J erk at Take-off
TSM
05-50-00-810-823
29
Smell of oil in cabin or
Unsatisfactory Cabin Air
Quality
Oil in the Air Conditioning
System
TSM
21-00-00-810-801


SECTION 5
SPECIAL PROCEDURES

ISSUE: SEP 2013 SUB-SECTION 5.2 PAGE 1
PARKING/STORAGE PROCEDURE

SUB-SECTION 5.2
PARKING / STORAGE PROCEDURES.

1. Parking procedure: Ref. AMM task: 10-11-00-555-006
2. Storage procedure: Ref. AMM task: 10-12-00-553-005


SECTION 5
SPECIAL PROCEDURES

COLD WEATHER MAINTENANCE PROCEDURE
SUB-SECTION 5.3
COLD WEATHER MAINTENANCE PROCEDURE.

Cold Weather Maintenance Procedures: Ref. A320 AMM task: 12-31-00-600-001.


SECTION 5
SPECIAL PROCEDURES

CRITICAL DESIGN CONFGURATION CONTROL LIMITATION
SUB-SECTION 5.4
A321 CRITICAL DESIGN CONFGURATION CONTROL LIMITATION

Itm CDCCL Requirement Reference Applicability
1
Air gap between a
fuel quantity
indicating probe
and the aircraft
structure.
Critical to prevent spark generation
during lightning strike conditions and
must not be compromised

The gap stated in the relevant
maintenance procedure in the AMM must
be achieved during installation of a fuel
quantity probe.
AMM
28-42-15-400

ALL
2
Separation of fuel
quantity and level
indicating system
wiring from other
wiring.
To prevent cross coupling of high voltage
transients and thereby keep unsafe
ignition energies from inside the tank it is
required that operators obey the wire
routing and separation standards given in
the Electrical Standard Practices Manual
(ESPM).
ESPM
20-10-00
20-33-20
20-33-21
20-33-22
ALL

3
Direct bonding on
items of equipment
inside a fuel tank.
Direct bonding is critical to prevent spark
generation during component failure and
lightning strike conditions and must not
be compromised.

Direct bonding in fuel tanks must be
carried out during component installation
to the appropriate bonding method and
standard stated within the installation
procedure in the AMM.

AMM
28-11-37-400

28-11-41-400
28-12-41-400
28-12-45-400
28-12-46-400
28-12-47-400
28-13-43-400
28-15-41-400
28-21-42-400
28-21-43-400
28-21-51-400
28-21-52-400
28-22-51-400
28-25-41-400
28-25-42-400
28-25-46-400
28-25-52-400
28-42-46-400
28-42-47-400
28-42-48-400
28-43-21-400
28-43-22-400
57-27-11-400

A321 Post
25453
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
4
Safety critical
features of fuel
pumps
These features must be maintained
throughout the full life of the fuel pump to
avoid the possibility of generation of an
ignition source by overheating or sparks
caused by arcing, friction etc.

CMM
28-20-40
28-21-51
28-22-19
28-24-11

A321 With ACT
ALL
ALL
ALL


SECTION 5
SPECIAL PROCEDURES

CRITICAL DESIGN CONFGURATION CONTROL LIMITATION
Itm CDCCL Requirement Reference Applicability
Repair and overhaul of fuel pumps must
be carried out in accordance with the
equipment manufacturers maintenance
instructions or other maintenance
instructions acceptable to the certifying
authority.
5
Centre fuel tank
volume and
ventilation flow rate
The volume of the centre fuel tank and
the flow rate of the ventilation system
must be maintained at values which,
when used in the determination of the
fuel tank flammability exposure, comply
with the fuel tank inerting system
requirements.
N/A A321 Post
38062

6
Protective coating
on fuel tank at the
connection of fuel
tank inerting ystem
A protective coating (Finch paint) is
necessary at the connection between the
centre fuel tank and the dual flapper
check valves housing of the Inert Gas
Generating System (IGGS) to prevent
fuel or fuel vapour leaks into an area
containing ignition sources.

After maintenance of the dual flapper
check valves the protective coating must
be restored to the appropriate standard
using the method stated within the
maintenance procedure in the AMM.
AMM
47-20-43-400
47-20-43-700

A321 Post
38062
7
Warning Placards
for areas that may
contain oxygen
depleted
atmospheres.

Warning placards installed to ensure
maintenance personnel are aware of
areas that may be hazardous because of
possible oxygen depleted atmosphere,
must be ensured to be present in the
designated positions.

AMM
57-17-11-000
57-17-11-400
28-12-47-000
28-12-47-400
A321 Post
150837

AMS Issue 14 Amendment 01

Uploaded by

Copyright:

Available Formats

AMS Issue 14 Amendment 01

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AMS Issue 14 Amendment 01

Uploaded by

Copyright:

Available Formats

A321

You might also like