Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
24 views

School of Environmental Science and Technology Ee 117: Engineering Mechanics I, Tutorial No. 3 Semister2 2013/14

This document contains tutorial problems about engineering mechanics involving forces and moments. It includes determining magnitudes of forces and moments, replacing force systems with equivalent force-couple systems, and calculating moments of forces about given axes.

Uploaded by

James K. Kirahuka
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

School of Environmental Science and Technology Ee 117: Engineering Mechanics I, Tutorial No. 3 Semister2 2013/14

This document contains tutorial problems about engineering mechanics involving forces and moments. It includes determining magnitudes of forces and moments, replacing force systems with equivalent force-couple systems, and calculating moments of forces about given axes.

Uploaded by

James K. Kirahuka
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ARDHI UNIVERSITY

School of Environmental Science and Technology


EE 117: ENGINEERING MECHANICS I, TUTORIAL NO. 3 SEMISTER2; 2013/14

1. Determine the magnitude of the moment
produced by the force of F = 200 N about the hinged
axis (the x axis) of the door.

2. The turnbuckle is tightened until the tension in cable
AB is 1.2 kN. Calculate the magnitude of the moment
about point O of the force acting on point A.

3. If the magnitude of the moment of F about line
CD is 50 N.m determine the magnitude of F.

4. Replace the two forces and single couple by an
equivalent forcecouple system at point A.

5. Determine the force-couple equivalent at A.

6. A tension T of Magnitude 10 kN is applied to the
cable attached to the top A of the rigid mast and
secured to the ground at B. Determine the Moment Mz
of T about the z axis passing through the base O.

You might also like