Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

PW7755 00

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

4168.11.33.

00

Dual Broadband Antenna

824-960/1710-2170 MHz

65 2.6 m MET Antenna

Part Number:
7755.00

Horizontal Beamwidth: 65o


Gain: 17.5/ 17.5dBi

Electrical Downtilt: Adjustable


Connector Type: 7/16 DIN female

The Powerwave dual band dual polarized broadband antenna has individual
adjustable electrical downtilt per band. Four connector ports allow separate tilts on
each frequency band and ensure the use of diversity concepts. The phase shifter
technology, based on a patented sliding dielectric, minimizes intermodulation
distortion and maximizes efficiency. The slant +/- 45 dual polarization system
provides the independent fading signals needed for achieving top-quality coverage
via diversity concepts. The Powerwave Broadband antenna design is based on a
patented stacked aperture-coupled patch technology, which provides high isolation
performance and a wide VSWR bandwidth. The antennas have superior radiation
patterns due to a unique reflector design which provides a very small variation of the
3dB horizontal beam width over the frequency band as well as a high front-to-back
ratio.

Key Benefits
Excellent broad- and multi-band capabilities
Polarization purity makes good diversity gain
Excellent pattern performance and high gain over
frequency
High passive intermodulation performance
Light, slim and robust design

D031-08203 Rev A

824-960 / 1710-2170 MHz

Dual Broadband Antenna


Electrical Specifications
Frequency band (MHz)

824-960

Gain, 0.5 (dBi)


Polarization
Nominal Impedance (Ohm)
VSWR, 824-960MHz
VSWR, 1710-2170MHz
Isolation between inputs, 824-960MHz (dB)
Isolation between inputs, 1710-2170MHz (dB)
Inter band isolation, MHz (dB)
Horizontal -3 dB beamwidth
Tracking,Horizontal plane, 824-960MHz, 60
Tracking,Horizontal plane, 1710-2170MHz, 60
Electrical downtilt range (adjustable)
Vertical -3 dB beamwidth
Sidelobe suppression, Vertical 1 st upper (dB)
Vertical beam squint
First null-fill (dB)
Front-to-back ratio (dB)
Front-to-back ratio, total power (dB)
Cross-polar discrimination (XPD) 60 (dB)
Average IM3, 2Tx@43dBm (dB)
Average IM3, 2Tx@43dBm (dB)
Average IM7, 2Tx@43dBm (dB)
Power Handling, Average per input (W)
Power Handling, Average total (W)

1710-2170

17.5

17.5
Dual linear 45
50

1.5:1
1.5:1
30
30
38
65
<2.0dB
2 to 8
6
> 17
@2 MET
0.8
< -25
> 28
>25
>11
-150

300
600

65
<1.5dB
0 to 8
6
> 17
@2 MET
0.8
< -25
>30
>25
>11

Typical Horizontal and Vertical 7755.00


850 MHz Band Patterns

-153
-160
250
500

Typical Horizontal and Vertical 7755.00


1900 MHz Band Patterns

All specifications are subject to change without notice.


Contact your Powerwave representative for complete performance data.

Mechanical Specifications
Connector Type

7/16 DIN female

Connector Position

Bottom

Dimensions, HxWxD

2630x280x125mm (88"x11x5)

Wind Load, Frontal, 100 mph Cd=1 (N)

868N (195 lbf)

Weight With Brackets

19.6 kg (43 lbs)

Survival Wind Speed


Lightning Protection

70m/s (156 mph)


DC grounded

Radome Material

PVC

Radome Color

Light Gray

Packing Size

2830x355x255mm (94"x12"x10")

Shipping Weight

23.3 kg (52 lbs)

Corporate Headquarters
Powerwave Technologies, Inc.
1801 East St. Andrew Place
Santa Ana, CA 92705 USA

Tel: 714-466-1000
Fax: 714-466-5800
www.powerwave.com

Main European Office


Antennvgen 6
SE-187 80 Tby
Sweden
Tel: +46 8 540 822 00
Fax: +46 8 540 823 40

Main Asia Pacific Office


23 F Tai Yau Building
181 Johnston Road
Wanchai, Hong Kong
Tel: +852 2512 6123
Fax: +852 2575 4860

Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.

You might also like