Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 273 views

    Sway Frame Steel Column Design

    Uploaded by

    Chirianu Marian
    This document summarizes the design of a steel column with a 203x203x52 UC cross section that is 3300 mm tall. It provides the key dimensions, material properties, applied loads, and design checks for the column. The column was found to be adequate under the applied axial load of 472.8 kN, bending moment of 9.5 kNm, and shear force of 4.7 kN based on checks for shear capacity, buckling, bending moment capacity, and combined axial and bending stresses.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sway Frame Steel Column Design

    Uploaded by

    Chirianu Marian
    273 views1 page
    This document summarizes the design of a steel column with a 203x203x52 UC cross section that is 3300 mm tall. It provides the key dimensions, material properties, applied loads, and design checks for the column. The column was found to be adequate under the applied axial load of 472.8 kN, bending moment of 9.5 kNm, and shear force of 4.7 kN based on checks for shear capacity, buckling, bending moment capacity, and combined axial and bending stresses.

    Original Description:

    Sway Frame Steel Column Design

    Original Title

    -Sway Frame Steel Column Design

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a steel column with a 203x203x52 UC cross section that is 3300 mm tall. It provides the key dimensions, material properties, applied loads, and design checks for the column. The column was found to be adequate under the applied axial load of 472.8 kN, bending moment of 9.5 kNm, and shear force of 4.7 kN based on checks for shear capacity, buckling, bending moment capacity, and combined axial and bending stresses.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    273 views1 page

    Sway Frame Steel Column Design

    Uploaded by

    Chirianu Marian
    This document summarizes the design of a steel column with a 203x203x52 UC cross section that is 3300 mm tall. It provides the key dimensions, material properties, applied loads, and design checks for the column. The column was found to be adequate under the applied axial load of 472.8 kN, bending moment of 9.5 kNm, and shear force of 4.7 kN based on checks for shear capacity, buckling, bending moment capacity, and combined axial and bending stresses.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    JOB

    TITLE

    Sway Frame Steel Column design

    DATE

    Dec-14

    PAGE

    BY

    MC

    CHECKED

    Geometry
    ( B11 )

    Column height

    L = 3300

    mm

    Try Section: 203x203x52 UC


    Radius of gyration

    ry = 51.8

    mm

    rx = 89.1

    mm

    A = 6630

    mm2

    Shear Area

    Av = 1629

    mm2

    Plastic Modulus

    S = 5.7E+05

    mm3

    I = 5.3E+07

    mm4

    Compression Area

    Moment of intertia
    Yield stress

    py = 275

    Shear Force

    V= 4.7

    kN

    Bending moment

    M= 9.5

    kNm

    Axial load

    N= 472.8

    kN

    VRd =268.8

    kN

    N/mm2

    Loading

    Shear capacity

    Shear OK
    Support restraint

    Both flanges fully restrained

    Effective length factor


    Restraint spacing

    0.70 x L

    mm (leave blank if no restraints)

    Effective length

    Le = 2310

    mm

    u = 0.848
    v = 0.920
    = 44.595
    For class 1 plastic or class 2 compact cross-sections

    <180, OK

    w = 1.000
    LT = 34.78
    LO = 34.31
    pb = 273.93

    Bending moment capacity

    Mb,Rd = 155.32

    N/mm2
    kNm
    Buckling OK

    Low shear, Mc =

    pyS

    = 155.9 kNm
    Bending OK

    Compressive strength

    pE= 2E/2= 1017.394


    =
    3.5

    allocation of strut curve

    

    =(-o)/1000=
     

    0.10

    o=

    17.15

    =[py+(=1)pE]/2= 695.0515
    = 244.1488 N/mm2

    

    
    Nc,Rd = 1618.706 kN

    

    Axial cap. OK

    
    N/Nc,Rd + M/Mb,Rd =

    0.35 < 1, Section OK

    You might also like