Catalog Trailerparts

2011 CATALOGUE
Trailer Parts & Accessories
cm
inch
1
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
10
www.trailerparts.net.au
Trailer. Boat. Caravan. Parts & Accessories
PART NUMBER PREFIX INDEX

A
B
C
D
E
FRONT OF TRAILER
AXLES
HUBS & BRAKES 01500 Kg
SPRINGS
LIGHTS & END OF TRAILER
F
G
H
I
WINCHES & BOAT TRAILER BITS

NUTS & BOLTS
SPRINGS, HUBS & BRAKES 1500Kg - 20000Kg
TORSION & GAFFA SUSPENSIONS
2-9
2
3-4
5-7
8
8
8
9
9
9
COUPLINGS
PINTLE HOOKS
RING PULL COUPLINGS
COUPLINGS
COUPLING SPARES
HAND BRAKE LEVERS
MASTER CYLINDERS
TOW BALLS
CHAIN
SHACKLES
10 - 11
10
10
10
11
11
11
ELECTRICAL
ELECTRICAL FLEX
PLUGS & ADAPTERS
ADAPTERS
GAS BOTTLE / JERRY CAN
LEVEL RIDES
MUDFLAPS
12 - 17
14 - 16
17
JOCKEY WHEELS
JOCKEY WHEELS : STANDARD
JOCKEY & CARAVAN STANDS
JOCKEY WHEELS : INDUSTRIAL
SECURITY DEVICES
18 - 22
AXLES
23 - 29
23 - 26
27
28
28 - 29
29
HUBS
HUBS
HUB DATA SHEET
BEARINGS
SEALS & DUST CAPS
WHEEL STUDS/NUTS
30 - 41
30
31
32 - 33
33
34 - 35
36 - 37
39
39 - 41
40
BRAKES
HYDRAULIC DRUM
MECHANICAL DRUM
ELECTRIC DRUM
ELECTRIC CONTROLLER
DISC BRAKES
HEAVY DUTY BRAKES
BACK WELD PLATES
BRAKE- A-WAY UNITS
SENS-A-BRAKE
41 - 42
42
43
43
RIMS, TYRES & MUDGUARDS

RIMS
MUDGUARDS
CASTOR WHEELS
43 - 60
43
44 - 45
46
47
48 - 50
49
51 - 52
53 - 55
56
56
56
57
57
58
58
59 - 60
SUSPENSION
BRANDED SPRINGS
SINGLE AXLE ASSEMBLY
TANDEM ROCKER ASSEMBLY
ROCKER ROLLER ASSMBLY
HEAVY DUTY ASSEMBLY
WALKING BEAMS
GAFFA SUSPENSION
SPRING DRAWINGS
BUSHES
SHACKLE PINS
SHACKLE PLATES
SPRING HANGERS
ROCKER ARMS & HANGERS
AXLE SADDLE
FISH PLATES
U-BOLTS
61 - 65
64
65
65
LIGHTS
REFLECTORS
COMPLIANCE PLATE
LIGHT KITS
65 - 68
65
66 - 69
67
69
69
CATCHES
HORSE FLOAT SPRINGS
CATCHES, LATCHES, HINGES
GAS STRUTS
AIR VENTS
WATER TANKS
70 - 72
70
71
72
WINCHES
WINCHES : PULLING
WINCHES : LIFTING
WINCH SPARES
73 - 77
72
73
74
75
76 - 77
ROLLERS
EZIGUIDE
BOAT ROLLERS : RED
BOAT ROLLERS : BLACK
BOAT ROLLERS : BLUE
BOAT ROLLER BRACKETS
78
78
78
RUBBER TORSION SUSPENSION

ALKO SUSPENSION
POSITORQUE
79 - 80
TRAILER KITS
CONTENTS
PAGE INDEX
sales@trailerparts.net.au
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
PINTLE HOOKS
A0131
WALLACE PINTLE HOOK R7

Drop forged hook
D Value 5
C.R.N. No 16120
A0131A
WALLACE PINTLE HOOK R 15

Drop forged hook
D Value 6
C.R.N. No 16121
A0131D
WALLACE PINTLE HOOK R 20

Drop forged hook
D Value 8
C.R.N. No 16122
A0131C
WALLACE PINTLE HOOK & BALL

Drop forged combination hook and
50mm tow ball.
Trailers with either eye couplings or ball
D Value 2
C.R.N. No 16124
A0132
CAST PINTLE HOOK

Ductile iron hook rated to 3000 Kg
A0132A
CAST PINTLE HOOK & BALL

Ductile iron hook rated to 3000 Kg
Ductile iron hook with steel 50mm ball
A0138
ROGERS PINTLE HOOK & BALL

Drop forged combination hook & 50mm ball
Hook & Ball forged as one unit. Hook D Value 7.5.
CRN 16349
Ball 3.0 tonne (ATM of trailer)
A0743
ADAPTER FOR PINTLE HOOK

To fit a pintle hook to a Hayman Reece adapter. Check rating of tow bar
A0272
SNAPPER PIN FOR WALLACE PINTLE HOOK

Safety pin for jaws.
A0274
SNAPPER PIN FOR PINTLE HOOK

Non genuine
Information on CRN is downloadable from http://rvcs-prodweb.dot.gov.au
COUPLING
All couplings are subject to wear and it is an engineering fact that the greater the contact area the more the load is distributed the wear factor is
reduced. A ball coupling presents a greater area of contact. The load per square centimeter is reduced so wear is reduced. With a ring and pintle hook
the area of contact under the load is minute, so if the pintle hook is soft material and the ring is soft material with no lubrication, fast and excessive
wear results. If the ring is harder steel, life becomes a bit more prolonged. A bit of grease helps. All couplings wear although less wear occurs on
couplings with hardened tempered eyes.
The D Value is the theoretical horizontal reference force between the towing Vehicle and the Trailer
D Value =
(Multiplied Vehicle and Trailer mass)
i.e. (Vehicle X Trailer)
(Sum of Vehicle and Trailer mass)
(Vehicle + Trailer)
Vehicle (Tonne)
Trailer (Tonne)
D Value
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
RINGPULL COUPLING - FIXED
Please see chart on previous page on D Value ratings.

A0126
3 Tonne FIXED RING COUPLING

75mm fixed ring
3 hole mounting
Ring size 75mm x 1-5/8
S.G. Iron construction
May be licensed.
Holes centers 3 @ 102 x 51 mm
Manufacturer : Trigg Brothers Pty Ltd
A0129
3.5 Tonne FIXED RING Coupling

75mm fixed ring
4 hole mounting. Not weldable.
S.G. Iron construction
May be licensed.
Holes centers 4 @ 184 x55mm
Manufacturer : Trigg Brothers Pty Ltd
A0130
5.0 Tonne Non-ADR FIXED RING coupling

5mm fixed ring. Not weldable.
Holes centers 4 @ 184 x55mm
Manufacturer : ALKO
RING PULL COUPLINGS - SWIVEL EYES
Please see chart on previous page on D Value ratings.

WELD-ON RING PULL COUP1NG
D Value 60 kN
CRN 39499
75mm swivelling eye
Ring and shaft is one piece, drop forged
41/40 material. Hardened & tempered
Solid steel body 63 x 63 X 160mm
Better suited for road use.
Manufacturer : TRAILER PARTS PTY LTD
A0160
TELECOM RING PULL COUPLING

D Value 60 Kn
CRN 39500
75mm swiveling eye.
41/40 material. Hardened & tempered.
Fabricated mild steel body may be
bolted or welded to trailer.
Holes centers 4 @ 188x80 mm
Sample D values
Vehicle
10T
12T
15T
Trailer
15T
12T
10T
D Value
6
6
6
COUPLING
A0118
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
RING PULL COUPLINGS - OVERRIDE BRAKES

3500 KG : FORGED EYE RING COUPLING
A0151
3.5 Tonne RING PULL OVERRIDE
A0153B
3.5 Tonne RING PULL OVERRIDE - MECHANICAL
A0156B
3.5 Tonne RING PULL OVERRIDE - HYDRAULIC

3.5 Tonne on unlicensed trailer
Rated at 2 Tonne as override on licensed trailer.
Body is fabricated mild steel.
41/40 hi-tensile. Hardened & tempered.
Holes centers 4 @ 184 x55 mm
2000 KG : FORGED EYE RING COUPLING

A0158
2 Tonne RING PULL OVERRIDE
A0159
2 Tonne RING PULL OVERRIDE - MECHANICAL
A0159A
2 Tonne RING PULL OVERRIDE - HYDRAULIC

Body is cast iron.
41/40 hi-tensile. Hardened & tempered.
Holes centers 4 @ 184 x55 mm
2000 KG : CAST IRON EYE RING COUPLING

A0181
RING PULL OVERRIDE
A0182
RING PULL OVERRIDE - MECHANICAL
A0184
RING PULL OVERRIDE - HYDRAULIC

Body is cast iron. Ring S. G. iron. Steel shaft.
Shaft is screwed & pinned to eye
Must be used with anti swivel plate
Holes centers 4 @ 184x55 mm
MANUFACTURER: TRIGG BROS.
COUPLING
RING COUPLING SPARES

A0163
RING & SHAFT FOR A0160 (Telecom Ring & Shaft)
A0174
RING & SHAFT FOR A0118 (Steel Weld on Body)
A0176
RING & SHAFT FOR A0151 (Over-ride Ring Pull)
A0212
TRIGG HYDRAULIC ANTI SWIVEL
A0213
TRIGG MECHANICAL ANTI SWIVEL
Other minor spares also available. See TRIGG coupling spares
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
A0101
WELDABLE 50MM COUPLING :

TRIGG Cast head with RHS steel shaft.
Lockable with adjuster. 2000Kg capacity
A0112
STANDARD 50MM COUPLING : TRIGG

The most common coupling we sell.
2000 Kg capacity.
Lockable Holes centres 3 @ 111 x 52mm
A0101A
WELDABLE 50MM COUPLING Lockable.

2000 Kg capacity
A0113
BRASS COUPLING 50MM Lever action,

traditional coupling. 1500Kg capacity.
Holes centres 3 @ 100 x45mm
A0115
A0102
FIXED 50MM COUPLING 3500 Kg capacity

with handbrake lever Lockable with adjuster.
Used with electric brakes Holes centers 4 @
184 x55mm
ALKO 50MM COUPLING :

2 hole bolt pattern @ 100mm
A102A
ALKO 3500Kg FIXED COUPLING

A0115A
ALKO PRESSED STEEL COUPLING

50mm ball 750 Kg capacity. Suit 50mm
square RHS
A0117
ALKO LEVER COUPLING NZ style lever

action coupling. 2000 Kg 36 x 90mm
A0116
ALKO Stabiliser 50mm Coupling

Lower the stabiliser handle, and spring loaded
friction pads press firmly against the towball.
Their high dampening force reduces even
small snaking movements in both horizontal & vertical
directions
SCREW DOWN 50MM : TRIGG

Small bolt on coupling. 1000Kg capacity
Holes centres 2 @ 65mm
COUPLING
A0103
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
OVERRIDE 50mm BALL BRAKE COUPLINGS

Caution:
When adjusting hydraulic brake couplings allow at least 4mm clearance between shaft & actuating lever.
TRIGG
A0109
2000 Kg - TRIGG OVERRIDE ONLY

NO BRAKE PLATE OR MASTER CYLINDER
Use this to assemble the hydraulic and mechanical
couplings. Hole pattern 4 hole @ 185 x 55 mm
A0105
A0105A
A0105B
50mm 2000 Kg - TRIGG HYDRAULIC OVERRIDE - 3/4 CYLINDER

50mm 2000 Kg - TRIGG HYDRAULIC OVERRIDE - 7/8 CYLINDER
50mm 2000 Kg - TRIGG HYDRAULIC OVERRIDE - 1 CYLINDER
A0108
A0108B
A0108C
TRIGG MECHANICAL OVERRIDE WITH CAST BRAKE PLATE

TRIGG MECHANICAL OVERRIDE WITH 75mm BRAKE PLATE
TRIGG MECHANICAL OVERRIDE WITH 100mm BRAKE PLATE
AL-KO
A0110C
50mm 2000 Kg - ALKO OVERRIDE ONLY

This is the head & shaft and body.
Use this to make the hydraulic and mechanical couplings.
Holes centres 4 @ 185 x 55 mm
A0110
A0110A
A0110B
50mm 2000 Kg - ALKO HYDRAULIC OVERRIDE 3/4

50mm 2000 Kg - ALKO HYDRAULIC OVERRIDE 7/8
50mm 2000 Kg - ALKO HYDRAULIC OVERRIDE 1
A0110D
A0108E
A0108F
ALKO MECHANICAL OVERRIDE WITH STEEL BRAKE PLATE

ALKO MECHANICAL OVERRIDE WITH 75mm BRAKE PLATE
ALKO MECHANICAL OVERRIDE WITH 100mm BRAKE PLATE
BIG BALL COUPLINGS

A0120
COUPLING
A0121
CARTER WESCO COUPLING & BALL

6 Tonne
D value 5
ADR approved. Ball 70mm. Ball A0318.
CARTER WESCO COUPLING ONLY
A0183
A0183A
AUTOLOCK COUPLING & BALL 9T

AUTOLOCK COUPLING ONLY
9T
ADR approved for on road use. Ball 3
Self closing action for gooseneck
A0185
A0185A
AUTOLOCK COUPLING & BALL 6T

AUTOLOCK COUPLING ONLY
6T.
Not ADR approved. Material fabricated mild steel
Self closing action for Gooseneck. Used with 2-5/16 ball.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
FWD STYLE COUPLINGS

(FOR OFF ROAD USE)
TREGG POLY BLOCK COUPLINGS THE ORIGINAL

TRAILER SIDE ONLY
ALKO Off Road 50mm BALL

A0070
A0072
ALKO 2000 Kg FIXED

ALKO 3500 Kg FIXED
A0075
A0075A
ALKO OVERRIDE BARE

ALKO OVERRIDE HYDRAULIC
with 3/4 M/CYLINDER
ALKO OVERRIDE HYDRAULIC
with 7/8 M/CYLINDER
A0075B
A0087C
A0089
A0089A
POLY BLOCK NON BRAKED

POLY BLOCK BRAKED
Holes centres 4 @ 184 x55 mm
ASSEMBLY includes car & trailer units

A0090
POLY BLOCK ASSEMBLY NO BRAKES

Weld on body. Capacity 3000kg
A0095
POLY BLOCK HYDRAULIC ASSY OVERRIDE

With 3/4 master cylinder.
2000 kg capacity. Holes
Available with other size cylinders
A0097
POLY BLOCK MECHANICAL ASSY OVERRIDE

3000 kg capacity.
With mechanical brake lever.
A0098
POLY BLOCK COUPLING ASSY

NO BRAKES
3500kg capacity
ALKO OVERRIDE MECHANICAL
HYLAND COUPLINGS Off Road 50mm BALL

A0086
A0087
A0087A
A0087B
HYLAND 2000 : NO BRAKES

HYLAND 2000 : OVERRIDE BARE
HYLAND 2000 : OVERRIDE
with 3/4 MASTER CYLINDER
HYLAND 2000 : OVERRIDE
with MECHANICAL PLATE
TRIGG BROTHERS POLY BLOCK COUPLING

TRAILER SIDE ONLY
A0098A
POLY BLOCK COUPLING NON BRAKED
A0098B
POLY BLOCK COUPLING BRAKED

Holes centres 4 @ 184 x55mm
VEHICLE COMPONENTS
A0088A
A0099
POLY BLOCK COUPLING ASSY NO BRAKES

3000kg capacity.
A0099B
POLY BLOCK HYDRAULIC ASSY OVERRIDE

With 3/4 master cylinder.
2000 kg capacity.
A0099D
POLY BLOCK MECHANICAL ASSY OVERRIDE

2000 kg capacity. Inc h mechanical lever.
DO35 OFFROAD COUPLING
COUPLING
ASSEMBLY includes car & trailer units
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
FIFTH WHEEL
A1750
A1752
A1754
BINKLEY 5th WHEEL HEAD AND PIN ASSY

BINKLEY 5th WHEEL HEAD ASSEMBLY (Trailer)
BINKLEY 5th WHEEL PIN & PLATE (Vehicle)
SLEW RINGS These need to be bolted not welded

A1705
A1710
A1715
BALLRACE TURNTABLE 750Kg

A1710
: 400mm
: 750mm
: 900mm
COUPLING
COUPLING SPARES
A0104
TRIGG
MECHANICAL PLATE
Cast A0807/ A809
A0104B
A0104C
A0104D
ALKO MECHANICAL PLATE Fabricated steel

75 RHS MECHANICAL PLATE
100 RHS MECHANICAL PLATE
Galvanised to go around drawbar
A0205
3/4 MASTER CYLINDER : ALKO
A0205A
A0205B
7/8 MASTER CYLINDER

1 MASTER CYLINDER
A0206
A0206C
A0206B
3/4 MASTER CYLINDER CAP

7/8 MASTER CYL CAP & BOWL
1 MASTER CYLINDER CAP
A0210A
A0210C
A0210D
A0215B
A0215D
A0215E
G0704
G0703
A0220F
TRIGG O/RIDE REVERSING CLIP

TRIGG O/RIDE CYLINDER MOUNT
TRIGG ADJUSTING SCREW & NUT
TRIGG COUPLING CAST PLUNGER
TRIGG STEEL SAFETY CATCH
TRIGG HANDLE ASSEMBLY
TRIGG TRIGGER SPRING
TRIGG PLUNGER SPRING
TRIGG SCREW COUPLING KIT
Star Nut, Bolt, Tongue
A0212
TRIGG RINGPULL HYDRAULIC

ANTI-SWIVEL PLATE
To suit TRIGG ring coupling fitted with
hydraulic brakes
TRIGG RINGPULL MECHANICAL
ANTI-SWIVEL PLATE
To suit TRIGG ring & mechanical brakes
A0213
A0230
A0232
A0233
A0234
A0235
ALKO CYLINDER MOUNT BRACKET

ALKO COUPLING PLUNGER
ALKO SAFETY CATCH
ALKO COUPLING HANDLE ASSY
ALKO REVERSING CLIP
A0256
A0256A
A0257
TREGG POLY-BLOCK U & PIN

TREGG PIN : 3/4
TREGG POLY BLOCK
A0221
A0221A
TRIGG POLY TOWBAR ADAPTER

TRIGG POLY HITCH LOCKING PIN
A0260
WELD ON 10mm PLATE

Drilled for Over-ride coupling.
A0262
WELD ON 10mm PLATE FOR A0112

Drilled for Trigg 3 hole coupling.
A0267
AUTO LOCK COUPLING JAWS 2-5/16
HAND BRAKE LEVER

A0286
HAND BRAKE LEVER

(STEEL) :
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
TOWBALLS
A0301
A0304
A0305A
A0306
STEEL
STEEL
STEEL
STEEL
1-7/8
50mm
50mm
50mm
SHANK 55 x 19mm
SHANK
55 x 22mm
SHANK
115 x 25mm 3500 Kg
SHANK
60 x 25mm 3500 Kg
A0316
A0325
STEEL
STEEL
50mm
50mm
SHANK
1 HI-RISE
75 x 22mm
55 x 22mm
A0311
A0312
A0313A
A0327
A0318
STEEL
STEEL
STEEL
STEEL
STEEL
50mm
50mm
2-5/16
3
70mm
SUIT
SUIT
SUIT
SUIT
SHANK
Wallace Pintle Hook

FWD Pintle Hook
6000 Kg AUTOLOCK
9000 Kg AUTOLOCK
60 x 42mm
CHAINS & SHACKLES

A0400
A0401
A0402
A0404
A0404A
A0404B
8mm
10mm
6mm
12mm
10mm
13mm
D SHACKLE - GALVANISED
D SHACKLE - RATED 1000 Kg
D SHACKLE - RATED 2000 Kg
A0409
8mm
A0410
10mm
A0412
13mm
A0414
10mm
ADR TRAILER CHAIN - PER METRE

Suit 1600 Kg trailer
LIFTING CHAIN
- PER METRE
A0420
10mm
HAMMER LOCK suit 10mm LIFTING
DRAW BAR PINS

DRAWBAR PIN
DRAWBAR PIN
DRAWBAR PIN
DRAWBAR PIN
DRAWBAR PIN
DRAWBAR PIN
DRAWBAR PIN
12 x
19 x
22 x
24.5 x
28.6 x
32 x
38 x
95mm
95mm
160mm
160mm
160mm
160mm
185mm
TOW BALLS & CHAIN
A0651
A0652
A0655
A0656
A0658
A0660
A0662
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
ELECTRICAL BASES AND PLUGS

A0501
A0503
A0504
6 PIN METAL SOCKET FOR VEHICLE

7 PIN METAL SOCKET FOR VEHICLE
7 PIN METAL PLUG FOR TRAILER
A0506
MOUNTING PLATE SUITE A0501 A0503
A0510
A0511
HEAVY DUTY BASE - LARGE ROUND (TRUCK/NATO TYPE)

HEAVY DUTY PLUG - LARGE ROUND (TRUCK/NATO TYPE)
A0520
A0521
6 PIN PLASTIC PLUG - SMALL ROUND

7 PIN PLASTIC PLUG - SMALL ROUND
A1501
A1502
A1504
A1505
7 PIN FLAT PLUG FOR TRAILER

7 PIN FLAT SOCKET FOR VEHICLE
12 PIN FLAT PLUG FOR TRAILER
12 PIN FLAT SOCKET FOR VEHICLE
ADAPTERS
SMALL ROUND
SMALL ROUND
SMALL ROUND
A0507A
A0508A
VEHICLE
ADAPTER - 7 pin small vehicle to
ADAPTER - 6 pin small vehicle to
TRAILER
6 pin small trailer
7 pin small trailer
A0512
A0513
ADAPTER - 7 pin Large round

ADAPTER - 7 pin small plug
to
to
7 pin small trailer

7 pin Large round
A1513
A1514
A1515
A1516
ADAPTER - 6 pin small round

ADAPTER - 7 pin small
ADAPTER - 7 pin flat socket
ADAPTER - 7 pin flat
to
to
to
to
7 pin flat plug

7 pin flat
6 pin small round
7 pin small
A1517
A1518
ADAPTER - 7 Large round

ADAPTER - 7 pin flat
to
to
7 pin flat
7 Large round
ELECTRICAL
ELECTRICAL FLEX
A0601
A0602
5 CORE 100 METRE ROLL

A0603
A0604

A0610
A0605
SINGLE CORE (5MM) FLEX 30 METRES

SINGLE CORE 30 METRES
A0606
A0612
A0615
A0620
5 CORE - CUT TO LENGTH

ELECTRICAL FLEX SHEATH - CUT TO LENGTH
7 PIN PLUG
1
YELLOW
2
BLACK
3
WHITE
4
GREEN
5
BLUE
6
RED
7
BROWN
WIRING INSTRUCTION
LEFT HAND TURN
REVERSING SIGNAL
EARTH RETURN
RIGHT HAND TURN
SERVICE BRAKES
STOP LIGHT
TAIL/CLEARANCE
6 PIN PLUG
YELLOW
WHITE
GREEN
BLUE
RED
BROWN
2
6
3
5
4
1
10
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
BODY PARTS
A0704
A0707
A0708
A0708A
A0709
A0761
A0761B
DOLLY WHEEL MOUNT : STANDARD

A swivel mounted dolly wheel boat trailers
to aid beach launching. Unit is welded or
bolted to chassis and takes any standard
trailer hub. Hub extra.
DOLLY WHEEL MOUNT: SLIMLINE
A0763
A0763B
TRAILER RESCUE KIT : STANDARD

TRAILER RESCUE KIT : S/LINE
SINGLE CARAVAN STEP

DOUBLE CARAVAN STEP
GAS BOTTLE HOLDER 9 KG

GAS BOTTLE HOLDER 9 ADJUSTABLE
GAS BOTTLE HOLDER 4.5 KG
A0710
JERRY CAN HOLDER (suit 20 litre)
A0720
A0720B
MUD FLAP 255 x 230mm

MUD FLAP 280 x 280mm
A0760A
SPARE WHEEL BRACKET
A0730
A0731
A0732
A0733
A0734
REESE TOWBAR ADAPTER Plus 70mm

REESE TOWBAR ADAPTER O Offset
REESE TOWBAR ADAPTER Minus 5mm
SUIT 70mm BALL - 42mm HOLE
COUPLEMATE RECEIVER inc BALL & PIN
A0755
A0756
SPARE WHEEL MOUNT 5 STUD

SPARE WHEEL MOUNT 6 STUD
Circular plates drilled for 5 stud or 6 stud
A0750
PM SPRUNG LOADED
Tow bar adapter for 4WD and light trucks.
Assists to absorb shock loads.
Aids A frames and chassis. Rated 2000Kg.
A0703
4 BAR LEVEL RIDE SET : 4 x 16mm bars

Use on ball weight up to 120 Kg.
Includes head, 4 arms & brackets.
A0715
2 BAR LEVEL RIDE : INDUSTRIAL

Use on ball weight up to 100 Kg.
Includes head, 2 arms & brackets.
A0702
A0716
A0718
HEAD FOR INDUSTRIAL LEVELRIDE

19mm BAR FOR INDUSTRIAL LEVEL
BRACKETS FOR LEVELRIDE
A0765
COUPLE MATE Aid for backing
TOW AIDS, GAS HOLDERS
TOWING AIDS & LEVEL RIDES
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
11
JOCKEY WHEELS - STANDARD

A0801
A0801A
A0820
ALKO 150 JOCKEY WHEEL & CLAMP

ALKO 150 JOCKEY WHEEL & SWIVEL
ALKO 150 JOCKEY WHEEL NO CLAMP
150x50mm
Lift 200mm
Body 350mm
16mm Acme thread
Standard clamp 2 hole
Swivel 4 hole clamp
A0801B MANUTEC JOCKEY WHEEL& SWIVEL

Wheel 150x50mm
Lift 200mm
16mm Acme thread
Attached 2 hole swivel
A0801C MANUTEC SIDEWINDER & SWIVEL

150x50mm wheel
Lift 200mm Body 350.
16mm Acme thread
Attached 2 hole swivel
JOCKEY WHEELS
A0802A
A0802B
A0802C
A0821
A0821A
ALKO 200 JOCKEY WHEEL : TALL

ALKO 200 JOCKEY WHEEL : SHORT
ALKO 200 JOCKEY SHORT & SWIVEL
ALKO 200 JOCKEY TALL NO CLAMP
ALKO 200 JOCKEY SHORT NO CLAMP
200mm metal & rubber tyre
Short 600mm .
Tall 750mm
Single clamp 2 hole
Swivel clamp 8 hole
A0807
ALKO FLAT FREE WHEEL & CLAMP
A0807B ALKO FLAT FREE WHEEL & SWIVEL
A0830
ALKO FLAT FREE NO CLAMP
410x4 Non Flat wheel
Body 360mm.
16mm Acme thread
Screw type clamp
A0808
A0826
ALKO POWER MOVER & CLAMP

ALKO POWER MOVER NO CLAMP
A ratchet operated.
This enables you to
crank your trailer along
in either direction.
Lift 200mm. Body 350mm.
16mm Acme thread.
Removable handle
A0810
NON FLAT GALVANISED

JOCKEY WHEEL & SWIVEL
Lift 200mm Body 360mm.
16mm Acme thread
Non Flat Rubber wheel.
Attached swivel plate.
A0811
TRAILA MATE HYDRAULIC

Hydraulic jockey wheel
Jockey wheel & stand.
Can be used to change wheels.
A0835
EASYMOVER DUEL WHEEL

A ratchet operated. This enables
you to crank your trailer along
in either direction.
A0855
150 X 50 BOAT WHEEL
A0859
450 X 4 PNEUMATIC TYRE

BOAT WHEEL
P/No
P/No
Brand
No Clamp
Clamp Swivel Wheel
Thread
Lift
Finish
A0801
A0801A
A0801B
A0801C
A0802A
A0802B
A0802C
A0807
A0807B
A0808
A0810
A0811
A0835
A0820
YES
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
200mm
200mm
200mm
200mm
200mm
200mm
200mm
200mm
200mm
200mm
225mm
380mm
200mm
Plated
550
Plated
550
Plated
550
Plated
550
Plated
900
Plated
800
Plated
800
Plated
930
Plated
930
Plated
930
Galvanised 700
Plated
1100
Plated
930
A0821
A0821A
A0830
A0826
A0835
ALKO
ALKO
ALKO
ALKO
ALKO
ALKO
MANUTEC
ALKO
ALKO
ALKO
MANUTEC
TRAILAMATE
MANUTEC
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
150 Rubber
150 Rubber
150 Rubber
150 Rubber
200 Metal/Rubber
200 Metal/Rubber
200 Metal/Rubber
200 Metal/Rubber
Flat Free
Flat Free
Flat Free
150 Nylon
Flat Free
Ex Height
Ret Height
Capacity
Kg
350
350
350
350
700
600
600
730
730
730
925
730
730
500
500
500
500
700
700
700
650
750
1000
1000
1000
900
12
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
LIGHT DUTY STANDS

A0803
A0804
A0805A
14 STAND SINGLE CLAMP

Lift 200mm Body 350mm
16mm Acme Thread
16mm Acme Thread
16mm Acme Thread
A1222
A1224
TRAILER FRONT 500mm Camper Style

TRAILER FRONT 600mm Camper Style
A1226
CARAVAN LEG 500mm : ALKO

Reverse swing leg Hinged at inside
CARAVAN LEG 740mm : ALKO
Reverse swing leg. Hinged at inside
A1227
A1228
A1229
CARAVAN QUICKS 590mm : ALKO

CARAVAN QUICKS 740mm : ALKO
Pull handle to quickly release leg
which then winds down
A1203
A1205
HANDLE : SLOTTED TYPE

HANDLE : HEX FOR ALKO SHORT
450mm. Suit CARAVAN QUICKS
HANDLE : HEX FOR ALKO LONG
800mm. Suit CARAVAN LEGS
A1206
A1215
JACK STANDS (ALUMINIUM)

Suitable for use as corner stabilizers on trailers and caravans.
Supplied per box of 4. Stackable to save space.
NOT TO BE USED AS A JACK.
A1220
STABILIZER BODY (SEC) 560mm

40mm RHS with sprung holding pin.
A1230
BIG FOOT
Caravan corner steady foot. Prevents Jack Legs sinking
Box of 4.
JOCKEY WHEELS
TRAILER & CARAVAN JACK LEGS
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
13
JOCKEY WHEELS - HEAVY DUTY

All wheels include a swivel plate
A1001A ALKO 8 X 2 JOCKEY WHEEL & SWIVEL

A1060 ALKO 8 X 2 JOCKEY WHEEL
Metal rim with dolid rubber tyre
Heavy duty tubing
Body 500mm
16mm acme thread Lift 200mm
Supplied with a PM Swivel plate
An economical heavy duty jockey wheel
A1030
A1082
MARTINS 10 X 2 JOCKEY WHEEL & CLAMP

MARTINS 10 X 2 JOCKEY WHEEL
ALLOY WHEEL & SOLID TYRE
Suitable for all heavy duty trailers to 4-1/2 Tonne.
Mounted with a PM spring loaded swivel plate
1-1/4 X 6 TPI acme thread.
Lift 200mm,
6mm Wall thickness.
Body 400mm.
Thrust bearing 1750Kg static.
Tyre rated to 400 Kg.
Manufactured to TELECOM specifications
by TRAILER PARTS PTY LTD
A1040
A1084
MARTINS WHEEL STEEL WHEEL & CLAMP

MARTINS WHEEL STEEL WHEEL
A1050
A1051
MARTINS JOCKEY PNEUMATIC TYRE & CLAMP

MARTINS JOCKEY PNEUMATIC TYRE
JOCKEY WHEELS
Specialised heavy duty jockey wheels

Wheel solid steel 9x5 or with 9 x 2-1/2.
A heavy duty jockey wheel for heavy duty trailers.
Mounted with a PM sprung loaded swivel plate
1-1/4 X 6 TPI Acme thread
Body 400mm
6mm Wall thickness
Lift 200mm
Thrust bearing 1750 Kg Static
Manufactured to TELECOM specifications
by TRAILER PARTS PTY LTD
A1062
ALKO AUTO RETRACT JOCKEY WHEEL

These jockey wheels are activated by winding
the handle, which automatically retracts the wheel
and fork to a travelling position.
14
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
Martins
HEAVY DUTY STANDS
ALKO
MANUFACTURER: TRAILER PARTS PTY LTD
A1006 JOCKEY ROUND SIDEWINDER

A1006A JOCKEY ROUND SIDEWINDER TALL
STANDARD 550-900mm extended height
TALL
1060-1440mm extended height
1300 Kg static load. 57mm round tube
Include pipe-in-pipe mount prewelded.
A1008
A1067
JOCKEY 70 STAND DROP LEG & CLAMP

JOCKEY 70 STAND DROP LEG
1500 Kg static load. 70mm square tube
Includes PM swivel plate
A1010
A1070
A1020 MARTINS TOPWINDER 3000 & SWIVEL

A1020 MARTINS TOPWINDER 3000 SQUARE
A01080 MARTINS TOPWINDER NO SWIVEL
Thrust bearing rated to 34 000 Kg static load
39mm X 6 TPI Acme thread.
Outer tube 75mm square
Retractable 690mm. Extended length 1040mm
Fitted with heavy duty handle
A1045
A1088
MARTINS SIDE WINDER 3000 & SWIVEL

MARTINS SIDE WINDER 3000
Thrust bearing rated to 34 000 Kg static load
39mm acme thread. Bevel gears ratio of 3:2
820mm height overall & 300mm lift
A1049
MARTINS DROP LEG 4500 STAND

Thrust bearing rated to 34 000 Kn static load
Maximum lifting load 1 500 Kg
39mm Acme Thread Bevel gears
ratio of 3:2
Steel nut, screw is immersed
in grease bath
Retractable 740mm.
Extended length: 1360mm
No swivel required
A1008 JOCKEY 70mm LEG NO DROP & CLAMP

A1008A JOCKEY 70mm LEG NO DROP
A01064 STAND BLACK
2000 Kg static load. 70mm square tube
Includes PM swivel plate.
A1090
MARTINS JOCKEY STAND & CLAMP

MARTINS JOCKEY STAND
Thrust bearing 1899 Kg Static
30mm X 6 TPI Acme thread screw
Body made of 60 mm heavy walled boiler tube.
DROP LEG 110mm

Static load capacity 4500Kg
Retractable length: 690mm.
Extended length: 1275mm
110mm outer tube. 585mm thread
JOCKEY WHEELS
A1002A ALKO TOPWINDING STAND & CLAMP

A1065 ALKO TOPWINDING STAND
Heavy duty tubing
Body 500mm
16mm Acme thread
Lift 200mm
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
15
BLACK STANDS
A1003
STAND AND SWIVEL

TRAVEL 250mm
MINIMUM HEIGHT 435mm
A1004
A1064
DROP LEG & PM SWIVEL

DROP LEG
ECONOMICAL STAND
TRAVEL; 380mm + 345mm
MINIMUM HEIGHT 615mm
JOCKEY WHEEL SWIVEL PLATES

SUIT THE A0801 STYLE
A0901
SINGLE CLAMP STANDARD

Two hole mount 150mm centre
SWIVEL PLATES HEAVY DUTY

A1101A
A1101B
STANDARD JOCKEY SPARES (A08** RANGE)

A0903
A0905
A0906
A0907
A0908
A0908A
A0909
A0910
A0910A
A0910C
A0911
A0927
A0901C
SWIVEL BRACKET
SMALL : MANUTEC
Two hole mount 175mm
JOCKEY WHEELS
CLAMP : MARINE GALVANISED
A0901F
SWIVEL BRACKET
SMALL : ALKO
Four hole mount
A0901G
SWIVEL BRACKET
LARGE : ALKO
Six hole mount
185x60 : 185x90 : 185x115mm
A0901H
SWIVEL / CLAMP :
ALKO
Tradition clamp with swivel bracket
185x60 185x90185x115mm
AXLE 1/2
AXLE 5/8
10 SEMI PNUMATIC WHEEL
6 RUBBER WHEEL
8 RUBBER WHEEL
200x55 PRESSED STEEL RIM
THRUST RACE : STD
TOP HANDLE:STD
Grub Screw: ALKO
TOP HANDLE:STD
Pin Type: ALKO
TOP HANDLE STD
Pin Type :MANUTEC
CLAMP HANDLE AND CLIP
HANDLE FOR POWER WHEEL
HEAVY DUTY SPARES (A10** RANGE)

E0966
A1102
A1103
A1104
A1110
A0901E
PM SWIVEL PLATE ROUND

PM SWIVEL BOLTABLE
A1112
A1122
A1135
A1136
A1147
A1148
A1149
A1150
NYLON KNOB AND SPINDLE FOR HANDLE

10x2 WHEEL: ALLOY/RUBBER
THRUST RACE-T/ 2780K
THRUST RACE-T/P 5500Kg
THREAD & NUT
M30 ACME 6-TPI
THREAD & NUT:M
39 ACME 6-TPI
HANDLE ASSYJ/WHEEL/STAND COMPLETE
A1040 STEEL WHEEL 50MM
A1040 STEEL WHEEL 125MM
A1045 2 GEARS & SHAFT ASSY
DROPLEG A1049 OUTER TUBE
DROPLEG A1049 MIDDLE TUBE
DROPLEG A1049 INNER TUBE
16
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
SECURITY DEVICES
A1312
COUPLEMATE DUAL LOCK ANIT-THEFT

Simple U type which engages in the coupling head
Locks trailer only & trailer and vehicle
A1311
HITCH LOCK GENERIC
A1316 COUPLEMATE LOCKABLE REESE PIN

A1316A COUPLEMATE LOCKABLE TREGG PIN
A1317 COUPLEMATE PADLOCK
A1318
MASTERLOCK COUPLING LOCK
A1318D MASTERLOCK PYTHON LOCKING CHAIN

Adjustable locking cable
HITCH HELMET
Solid anti theft unit.
Lock trailer alone or car & trailer together.
Can be used while driving.
Includes quality padlock & 50mm ball
SECURITY
A1320
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
17
AXLES (TIP TO TIP MEASUREMENTS)
Pre & post heating must be used as part of any welding procedure on all axles
39mm ROUND AXLES STANDARD TURNING 750KG
B0101
B0102
B0103
B0104
B0105
B0106
B0107
B0108
B0109
B0110
B0111
B0113
1218mm
1293mm
1345mm
1448mm
1524mm
1600mm
1650mm
1727mm
1804mm
1880mm
1955mm
2005mm
48
51
53
57
60
63
65
68
71
74
77
79
40mm SQUARE AXLES STANDARD TURNING 1 Tonne

B0201
B0202
B0203
B0204
B0205
B0206
B0207
B0208
B0209
B0210
B0211
B0212
B0213
B0214
B0215
B0216
B0217
1218mm
1295mm
1345mm
1448mm
1524mm
1600mm
1650mm
1727mm
1804mm
1880mm
1955mm
2057mm
2108mm
2185mm
2260mm
2005mm
2290mm
48
51
53
57
60
63
65
68
71
74
77
81
83
86
89
79
45mm SQUARE AXLES STANDARD TURNING 1 Tonne

ALSO AVAILABLE USING 50mm ROUND
B0301
B0302
B0303
B0304
B0305
B0306
1650mm
2108mm
2185mm
2260mm
2387mm
2437mm
65
83
86
89
94
96
45mm SQUARE AXLES SLIMLINE TURNING 1.25 Tonne

ALSO AVAILABLE USING 50mm ROUND AND 50mm SQUARE
AXLES
B0401
B0402
B0403
B0404
B0405
B0406
B0407
B0408
B0410
B0411
B0412
1650mm
1955mm
2108mm
2387mm
2437mm
1727mm
2185mm
2260mm
1600mm
1880mm
2005mm
65
77
83
94
96
68
86
89
63
74
79
18
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
AXLES
45mm SQUARE AXLES 1.5 Tonne PARALLEL TURNING
B0461
B0462
B0463
B0464
B0465
B0467
1650mm
1727mm
1958mm
2108mm
2387mm
2437mm
65
68
77
83
94
96
45mm SQUARE AXLES 1.5 Tonne OFF ROAD TURNING

B0482
B0483
B0484
B0485
B0486
B0487
1650mm
1727mm
1955mm
2108mm
2387mm
2437mm
65
68
77
83
94
96
We machine our axles so we can make special lengths.

Axle measurements are from tip to tip
50mm SQUARE AXLES 2.0 Tonne & 30 CWT TURNING
Uses HB200 hubs
B0901
B0902
B0903
B0904
1725mm
2032mm
2387mm
2437mm
68
80
94
96
30 CWT / ALKO 1500 Kg turning available

63mm ROUND AXLES
Using HB300 hubs, combination is rated at 3000 Kg
Lengths to customers requirements.
65mm SQUARE AXLES
Lengths to customers requirements
75mm ROUND AXLES
75mm SQUARE AXLES
AXLES
90mm ROUND AXLES

Using HB600 hubs, combination rated at 10 000 Kg.
Using HB650 hubs, combination rated at 13 000 Kg
110mm ROUND AXLES
Using HB650 hubs combination rated at 14 000 Kg.
Stub axles only available.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
19
STUB AXLES
Rating per pair of stub axles

B0501
B0502
B0503
STANDARD
STANDARD
STANDARD
39 ROUND
39 ROUND
39 ROUND
X 203 mm
X 254 mm
X 305 mm
750 Kg per pair

750 Kg per pair
750 Kg per pair
B0504
B0505
B0506
STANDARD
STANDARD
STANDARD
40 SQUARE
40 SQUARE
40 SQUARE
X 203 mm
X 254 mm
X 305 mm
1000 Kg per pair

1000 Kg per pair
1000 Kg per pair
B0603
B0603
B0603
SLIMLINE
SLIMLINE
SLIMLINE
45 SQUARE
45 SQUARE
45 SQUARE
X 203 mm
X 254 mm
X 305 mm
1250 Kg per pair

1250 Kg per pair
1250 Kg per pair
B0650
B0652
1.5 TONNE
1.5 TONNE
45 SQUARE
50 ROUND
X 305 mm
X 305 mm
B0702
B0710
2.0 TONNE
2.0 TONNE
50 SQUARE
56 ROUND
X 305 mm
X 305 mm
B0801
B0802
3.0 TONNE
3.0 TONNE
63 ROUND
65 SQUARE
X 305 mm
X 305 mm
B0803
B0805
4.0 TONNE
4.0 TONNE
63 ROUND
65 SQUARE
X 305 mm
X 305 mm
B0808
6.0 TONNE
75 ROUND
X 300 mm
B0808
B0809
7.0 TONNE
7.0 TONNE
75 ROUND
75 SQUARE
X 500 mm
X 500 mm
B0810
10 TONNE
100 ROUND
X 500 mm
B0814
20 TONNE
130 ROUND
X 500 mm
B0501
B0504
Pre & post heating must be used as part of any welding procedure on all axles.
CAPACITY
Kg
MATERIAL
mm
NUT
NUT
WASHER
WASHER
SPLIT PIN
SPLIT PIN
STANDARD
STANDARD
SLIM LINE
PARALLEL
HB100A
HB200
HB300
HB400
HB500
HB560
HB600
HB650
HB650
750
1000
1250
1500
1500
2000
3000
4000
5000
7000
10 000
13 000
20 000
39 ROUND
40 SQAURE
45 SQUARE
45 SQUARE
45 SQUARE
50 SQUARE
65 ROUND
65 ROUND
75 ROUND
75 SQUARE
90 SQUARE
110 SQUARE
130 SQUARE
G0201
G0201
G0201
3/4 UNF
3/4 UNF
3/4 UNF
G0401
G0401
G0401
3/4 X 1-1/2
3/4 X 1-1/2
3/4 X 1-1/2
G1004
G1004
G1004
4 x 40mm
4 x 40mm
4 x 40mm
G0205
G0202
G0202
G0202
7/8 UNF
1-1/4 UNF
1-1/4 UNF
1-1/4 UNF
G0404
G0402
G0402
G0402
7/8 X 1-5/8
1-1/4 X 1-1/2 X Hm
1-1/4 X 1-1/2 X Hm
1-1/4 X 1-1/2 X Hm
G1004
G1005
G1005
G1005
4 x 40mm
6 x 50mm
6 x 50mm
6 x 50mm
G0203
G0220
G0222
G0222
1-1/2 UNF
M60 lock nut
M65 lock nut
M65 lock nut
G0418
G0720
G0721
G0721
1-1/4 X 1-1/2 X Hm G1005

M60 lock washer
M60 lock washer
M60 lock washer
6 x 50mm
AXLES
HUB
TYPE
20
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
SPECIAL AXLES : MADE TO ORDER

HORSE FLOAT
B1102
2108mm 83
40mm 75mm DROP AXLE 1000 Kg Horse Float Axle
GALVANISED : Galvanised bar kept in stock to make axles to length required

B1120
B1122
1218-1650 mm
1651-2005 mm
48-65
66-79
39mm ROUND GALVANISED

39mm ROUND GALVANISED
B1130
B1132
1218-1650 mm
1651-2260 mm
48-65
66-89
40mm SQUARE GALVANISED

B1140
B1142
1218-1955 mm
1956-2437 mm
48-77
78-96

B1150
B1142
1218-1955 mm
1956-2437 mm
48-77
78-96

OVERLAY AXLES : MADE TO ORDER

An Overlay axle has the stub axles welded to the top of the main beam.
This lowers the main beam by the size of the stub axle.
Used on horse floats, boat & car trailers. Lengths made to suit.
Made in 1000 Kg, 1250 Kg, 1500 Kg and 2000 Kg capacity.
DROP AXLE:
AXLES
MOSTLY MADE TO ORDER

A drop axle uses a cheek to lift or drop the stub axle.
Cheeks can be 75mm or 100mm.
2000 Kg axles use 100mm drop cheeks.
Ensure that the U-Bolts do not protrude below the rim.
Made in 1000 Kg, 1250 Kg, 1500 Kg and 2000 Kg capacity.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
21
Points to consider when calculation the length of your axle.
Axles are measures tip to tip (end of thread to end of thread)

If you know the length hub face to hub face (where the wheel bolts on) , add the Hub Flange to Tip of Axle measurement to both ends. See page 26 for this measurement. It varies with different axles.
If you only know the chassis you need to add
Chassis
2 x Tyre gap (distance between the chassis and inside of tyre)
2 x Offset of rim (page 41, measurement A)
2 x Hub Flange to Tip of Axle ( Page 26)
Attention must be paid to interference distance for the type of brake being used. (Page 29)
For drop axles, allow sufficient length of stub axle for the brakes to be mounted.
For drop axles, ensure nothing protrudes below your rim line (eg U-Bolts.)
HUB INFORMATION
AXLES
Please note that these are not genuine automobile studs. They are Trailer Industry standard
MODEL
STUDS
P.C.D
STUDS CENTRE - CENTRE
HOLDEN HT
HOLDEN HQ
COMMODORE
FORD FALCON
FORD 4 STUD
FORD F100
LAND CRUISER
NISSAN
LAND CRUISER
LAND ROVER
MINI
JAP 4 STUD
BMW
5 X 7/16 STUDS
5 X 7/16 STUDS
5 X 7/16 STUDS
5 X 1/2 STUDS
4 X 1/2 STUDS
5 X 1/2 STUDS
6 X 1/2 STUDS
6 X 1/2 STUDS
5 X 9/16 STUDS
5 X 5/8 STUDS
4 X 7/16 STUDS
4 X 7/16 STUDS
4 X 7/16 STUDS
107.5mm
120.5mm
120mm
114mm
108mm
140mm
140mm
140mm
150mm
165mm
101.5mm
114.3mm
100mm
63mm
71mm
70.5mm
67mm
76mm
82mm
70mm
70mm
88mm
97mm
72mm
81mm
71mm
5 stud 100 series
Nose turned down
22
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
HUBS 1.0 Tonne per pair
Complete with studs, bearings, seal, nuts & dust cap. 1.0T Hubs use bearings LM67048/10 & LM11949/10
Standard & Slimline use the same casting. Using Quality KOYO Bearings
C0101
C0103
C0105
C0109
C0111
C0113
C0116
C0117
C0131
C0119
C0124
C0127
C0133
C0137
These use
STANDARD HOLDEN
HQ HOLDEN
FORD
COMMODORE
4 STUD JAP
MINI
BLANK : NO STUDS
CORTINA
STEEL : NO FLANGE
L/ROVER
Not recommended 15 or 16 wheels.
L/CRUISER Not recommended 15 or 16 wheels.
F100
L/C 100 Series 5 STUD
Not 15 or 16 wheels.
BMW with turned down nose
C0205
C0301
C0302
C0401
C0602
C0604
TYPICAL HUB-STUB ASSEMBLY
SPECIAL STUD PATTERNS AVAILABLE

12mm 14mm 18mm STUDS AVAILABLE
Bearing Kit
Seal
Seal Water Supa Seal
Dustcap
7/16 wheel nuts
1/2 wheel nuts
PLATED HUBS
Standard & Slimline use the same casting. Complete with studs, bearings, seal, nuts & dust cap
C0101G
C0103G
C0105G
STANDARD HOLDEN
HQ HOLDEN
FORD
Also available with slimline bearings

UNBRANDED BEARING HUBS

C0101C
C0103C
C0105C
C0109C
C0111C
C0113C
C0116C
C0117C
C0131C
C0119C
C0124C
C0127 C
C0133 C
C0137C
STANDARD HOLDEN
HQ HOLDEN
FORD
COMMODORE
4 STUD JAP
MINI
BLANK : NO STUDS
CORTINA
STEEL : NO FLANGE
L/ROVER Not recommended 15 or 16 wheels.
L/CRUISER
F100
L/C 100 Series 5 STUD
Not 15 or 16 wheels.
C0218
Bearing Kit
C0301
Seal
C0302
C0401
Dustcap
C0602
7/16 wheel nuts
C0604
1/2 wheel nuts
We can drill hubs to suit other patterns. A sample may be required.
HUBS
These use
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
23
HUBS 1.25 Tonne per pair (SLIMLINE)
Complete with studs, bearings, seal, nuts & dust cap. 1.25T hubs use L68149/10 & LM12749
Standard & Slimline use the same casting.
C0101B
C0103B
C0105B
C0109B
C0111B
C0113B
C0116B
C0117B
C0119B
C0124B
C0127B
C0133B
C0137B
These use
STANDARD HOLDEN
HQ HOLDEN
FORD
COMMODORE
4 STUD JAP
MINI
BLANK : NO STUDS
CORTINA
L/ROVER
L/CRUISER
F100
L/CRUISER 100 SERIES 5 STUD
C0259
C0315
C0317
C0401
C0602
C0604
TYPICAL HUB-STUB ASSEMBLY
SPECIAL STUD PATTERNS AVAILABLE

12mm 14mm 18mm STUDS AVAILABLE
Bearing Kit
Seal
Dustcap
7/16 wheel nuts
1/2 wheel nuts
HUBS BARE : STUDDED ONLY
Standard & Slimline use the same casting.

C0102
C0104
C0106
C0110
C0112
C0114
C0115
C0118
C0120
C0122
C0128
C0132
C0134
C0138
STANDARD HOLDEN
HQ HOLDEN
FORD
COMMODORE
4 STUD JAP
MINI
BLANK : NO STUDS
CORTINA
L/ROVER
L/CRUISER
F100
STEEL : NO FLANGE
L/CRUISER 100 SERIES 5 STUD
STEEL FLANGELESS HUBS
These hubs are able to be welded

C0131
C0131B
HB200A
STEEL : NO FLANGE Complete with standard bearings

STEEL : NO FLANGE Complete with Slimline bearings
STEEL : NO FLANGE Complete 2000Kg
PARALLEL BEARING HUBS
HUBS
C0151
C0151A
C0152
C0152A
C0154
PARALLEL HUB 6 STUD L/C COMPLETE

PARALLEL HUB 5 STUD L/C COMPLETE
PARALLEL HUB 6 STUD L/C STUDDED ONLY
PARALLEL HUB 5 STUD L/C STUDDED ONLY
PARALLEL HUB BARE UNSTUDDED
24
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
HEAVY DUTY HUBS
Complete with studs, bearings, seal, nuts & dust cap. Manufactured by MARTINS TRAILER PARTS
HB100
HUB COMPLETE 30 CWT ALKO

H0702 Hub bare
H0708 Inner Bearing
LM29749/10
H0710 Outer Bearing
LM67048/10
H0720 Seal
C0426 Dust Cap
HB100A
HUB COMPLETE 1500 Kg SWL PER PAIR

Can be used with Ford, HQ, L.Cruiser, Nissan
H0732 Hub studded
L/Cruiser
H0734 Inner bearing
LM29749/10
H0736 Outer bearing
L44649/10
H0738 1.5 tonne seal
H0738A 1.5 tonne SUPA-SEAL
C0418 Dust cap : screwed aluminum 60mm
C0419 Dust cap : screwed and greaseable
C0503 1/2 wheel nuts
H0742 Bearings and seal set for HB100A
Boating two part SUPA-SEALS now available
HB200
HB200A
HUB COMPLETE 2000 Kg SWL PER PAIR

HUB COMPLETE 2000 Kg
STEEL FLANGELESS
HB300
HUB COMPLETE 3 Tonne SWL PER PAIR

Can be used with L/Cruiser, Nissan, F100, Land Rover rims
H0825 Hub studded
Land Cruiser
H0836 Inner bearing
HR30210J
H0838 Outer bearing
LM29749/10
H0835 3 tonne seal
C0420 Dust cap - screwed cast iron 70mm
HB400

H0904 Hub studded
Bedford (6 on 205mm pcd)
H0906 Inner bearing
JLM 506849/10
H0908 Outer bearing
32008X
H0910 4 tonne seal
C0510A 3/4 wheel nuts
C0631 3/4 UNF wheel stud
HUBS
Can be used with L/Cruiser, Nissan, F100, Land Rover rims

H0801 Hub studded
L/Cruiser
H0810 Inner bearing
25580/20
H0812 Outer bearing
LM67048/10
H0815 2 tonne seal
H0815A 2 tonne SUPA seal
H0816 Bearings and seal set for HB200
C0444 Dust Cap 70mm Aluminium
C0426 Dust cap - pressed steel 2-1/2
Boating two part SUPA-SEALS now available
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
25
HEAVY DUTY HUBS continued
Complete with studs, bearings, seal, nuts & dust cap

Manufactured by TRAILER PARTS PTY LTD
HB500

6 x M18 studs on 205 P.C.D.
H0920
B0808
H0925
H0926
C0434
HB560
Hub studded
75mm round stub
Bearing set 33011JR
5 tonne seal
Dust cap - screwed cast iron 88mm

8 x 3/4 UNF studs on 275 P.C.D.
H0936 Hub studded
B0808 75mm round stub
H0938 Bearing set HM 212047
H0940 Outer bearing set HM 104948
H0942 7 tonne seal 125 x 95 x 12mm
special stud patterns available
HB600

10 x 3/4 UNF studs on 285.75 P.C.D.
H1004
B0810
H1006
H1008
H1010
C0430
AW12
AW12
Special
HB650
HUB COMPLETE 20 Tonne SWL / PAIR

10 x 7/8 B.S.F. studs on 285.78 P.C.D.
340mm flange. 220mm central boss.
HB650A
HUB COMPLETE 20 Tonne SWL / PAIR

10 x 7/8 B.S.F. studs on 335 P.C.D
PCD up to 350mm available.
400mm flange. 262m central boss.
H1024
H1025
B0814
H1026
H1028
H1030
C0430
AW13
AW13
Special
HUBS
Hub studded
90mm round stub
Inner bearing set HM 212049 / 11
Outer bearing set HM 212047 / 11
10 tonne seal 125 x 85 x 13mm
Dust cap - screwed 125mm
Lock washers
Lock nuts
stud patterns available
Hub studded 340mm flange

Hub studded 400mm flange
130mm round stub
Inner bearing set HM 218248 / 10
Outer bearing set HM 212049 / 11
20 tonne seal 150 x 120 x 13mm
Dust cap - screwed 125mm
Lock washers
Lock nuts
stud patterns available
26
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
1500
1500
Parallel
30 Cwt
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
HUBS
20 000
20.0T
7000
7.0T
10 000
5000
5.0T
10.0T
4000
4.0T
3000
1500
1.5 tonne
3.0T
1250
Slimline
2000
1000
Standard
2.0T
39MM RD
750
Standard
130MM RD
90MM RD
75MMSQ
90mm rd
63MM SQ
63MM SQ
50MM SQ
50MM SQ
45MM SQ
45MM SQ
45MM SQ
40MM SQ
Material
Axle Type Capacity

Kg
HM218248
HM218210
HM212049
HM212011
HM212047
HM212011
33011JR
JLM506849
JLM506810
HR30210J
HR30210J
25580
25520
LM29749
LM29710
L68149
L68110
LM29749
LM27910
L68149
L68110
LM67048
LM67010
LM67048
LM67010
Inner
HM212049
HM212011
H1030
H1010
H0942
JLM104948
JLM104910
HM212047
HM212011
H0810
H0910
H0835
H0815
H0720
C0315
H0738
C0315
C0301
C0301
Seal
No
33011JR
732008XM
32008XM
LM29749
LM29710
LM67048
LM67010
LM67048
LM67010
L68149
L68110
L44649
L44610
LM12749
LM12710
LM11949
LM11910
LM11949
LM11910
Outer
C0430
C0430
C0434
C0446
C0421
C0421
C0421
C0426
C0426
C0418
C0401
C0401
C0401
Dust
No
90
66.68
63.5
55
55
50
44.44
38.1
35
38.1
34.99
31.75
31.75
Inner
Size
66.68
63.5
50
55
40
38.1
31.75
31.75
35
27
21.97
19.05
19.05
Outer
Size
120
85
95
62
62
62
49.5
48
44
44.45
44.45
37.5
37.5
Seal
ID
150
125
125
90
90
90
85
69.5
59.1
66.7
59.1
59.1
59.1
Seal
OD
125
125
90
96
70
70
70
2.5
2.5
60
45
45
45
Cap
535mm
535mm
520mm
690mm
375mm
375mm
375mm
375mm
375mm
375mm
320mm
320mm
Rolling
Radius
125
125
145
100
90
90
88
70
55
66
50
50
50
Hub Flange
to Tip of Axle
200
200
195
157
150
150
135
125
124
135
115
115
115
Seal
to Tip
27
BRANDED HUB & BRAKE PARTS

ALKO
DEXTER
H1820
ALKO 2T HUB STUDDED
H1821
H1822
H1823
H1824
H1825
ALKO 2T INNER BEARING 30210J

ALKO 2T OUTER BEARING 15123/15245
ALKO 2T SEAL
ALKO 2T DUST CAP 2.5
ALKO 2T BEARING & SEAL KIT
H1830
H1831
H1840
H1841
ALKO 2T HUB DISC 14mm 6 STUD

ALKO 2T HUB DISC 14mm 5 STUD
ALKO HUB DRUM 12X2
6 STUD
ALKO HUB DRUM 12X2
5 STUD
H1850
H1850A
H1850B
H1850C
DEXTER HUMDRUM 12X2

DEXTER INNER BEARING 25520/80
DEXTER OUTER BEARING
4T15123/15245
DEXTER DUST CAP USE C0429
MELBOURNE TRAILER
H1851
MELBOURNE 2T HUB DISC 300mm
H1860
H1861
TROJAN HUB & BRONZE DISC

TROJAN BEARINGS LM48548
L44649
STANDARD BEARINGS (A/B)

C0201
C0203
C0205
C0205A
C0205B
INNER CUP & CONE

LM 67048 / LM 67010
OUTER CUP & CONE
LM 11949 / LM 11910
STANDARD BEARING SET - INNER & OUTER
STANDARD BEARING SET & SEAL
STANDARD BEARING SET & MARINE SEAL
SLIMLINE BEARINGS (E/F)

C0255
C0257
C0259
C0259A
C0259B
SLIMLINE INNER CUP & CONE L68149 / L68110

SLIMLINE OUTER CUP & CONE LM12749 / LM12710
SLIMLINE BEARING SET - INNER & OUTER
SLIMLINE BEARING SET & SEAL
SLIMLINE BEARING SET & MARINE SEAL
PARALLEL BEARINGS (10 PARRALLEL HUB)

Bearing numbers L68149 & L68110
C0270
C0270A
C0270B
PARRALLEL BEARING SET

PARALLEL BEARING SET & SEAL
PARALLEL BEARING SET & MARINE SEAL
C0262
C0264
1 PARALLEL CONE
1 PARALLEL C
07100/S
07210/X
SEALS
HUBS
C0301
C0302
C0310
C0315
C0317
H0720
H0738
H0738
H0815
H0815A
H0835
H0910
H0942
H1010
H1030
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
SEAL
STANDARD HUB
WATER SUPA SEAL FOR STD HUB
FOR RED RIM (PARALLEL BEARINGS)
SLIMLINE HUB
SLIMLINE WATER SUPA SEAL
30 CWT HUB (HB100) OLD TYPE
1 500KG HUB
1 500KG WATER SUPA SEAL
2 000KG HUB
2 000 KG WATER SUPA SEAL
3 000 KG HUB
4 000 KG HUB
7 000 KG HUB
10 000KG HUB
20 000KG HUB
28
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
DUST CAPS
C0401
C0404
C0408
C0412
C0416
C0418
C0419
C0422
C0425
C0426
C0428
C0429
C0430
C0434
C0436
C0444
C0434
DUST CAP - 45 mm suit standard hub

DUST CAP - 2-1/16
DUST CAP - 2-1/8
DUST CAP - 2-1/4
DUST CAP - RUBBER FOR VELOX RIM
DUST CAP - ALUMINIUM 60mm screwed
DUST CAP - ALUMINIUM 60mm screwed GREASEABLE
DUST CAP - 2-7/16
DUST CAP - 2
DUST CAP - 2-1/2
DUST CAP - 3
DUST CAP - 62mm DEXTER
DUST CAP - 10 & 20 TONNE HUB 125 mm
DUST CAP - 7 TONNE HUB 90 mm screwed
DUST CAP - INDUSTRIAL HEX TOP
DUST CAP - ALUMINIUM 70mm screwed GREASEABLE
DUST CAP - 5 TONNE HUB 96 mm screwed
BEARING BUDDIES
C0402
C0402A
C0403A
C0440
C0442
BEARING BUDDIES (Genuine)

BEARING BUDDY COVERS
BEARING PROTECTORS : ALKO
BEARING BUDDY 1.98
BEARING BUDDY 2.562
(PER PAIR)
(PER PAIR)
(PER PAIR)
(PER PAIR)
(PER PAIR)
WHEEL NUTS
C0502
C0503
C0506
C0507
C0508
C0509A
C0510
C0510A
C0520
C0522
C0524
7/16
9/16
5/8
5/8
7/8
3/4
3/4
M12
M14
M18
UNF
UNF
UNF
UNF
UNF
BSF
UNF
UNF
METRIC
METRIC
METRIC
60 DEGREE
60 DEGREE
60 DEGREE
45 DEGREE
60 DEGREE
60 DEGREE
60 DEGREE
45 DEGREE
60 DEGREE
60 DEGREE
Radius
1.50 A/F
1.25 A/F
WHEEL STUDS 20 All length dimensions measured from under head.

Description
C0602
C0604
C0627
C0628
C0621
C0622
C0623
C0624
C0631
C0635
C0640
C0642
C0644
C0646
7/16 Standard
1/2 Standard
1/2 Short Knurl
1/2 Long Knurl
9/16 Short Knurl
9/16 Long Knurl
5/8 Short Knurl
5/8 Long Knurl
3/4
7/8 Single Wheel
M12
M14
M14
M18
Type
Thread
Length
Overall
Length
Thread
Length
Knurl
Diameter
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
BSF
METRIC
METRIC
METRIC
METRIC
38
38
50
57
50
57
50
57
60
54
37
50
50
60
27
27
30
35
35
30
35
30
36
54
27
24
24
45
7
7
12
21
12
21
12
21
20
Bolt through
10
8
20
15
14
14
16
16
16
16
18
18
12
16
16
HUBS
PART NO
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
29
HYDRAULIC DRUM BRAKE ASSEMBLIES

STANDARD TURNING 1 Tonne ASSEMBLIES (per AXLE)
Contains 2 hubdrums, 2 back plates, backweld plates, bearings, seals, dust caps, & wheel nuts.
C0801
C0802
C0803
C0804
C0805
C0806
STD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
L/ROVER
4 STUD JAP
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
9 X 1-3/4
9 X 1-3/4
9 X 1-3/4
9 X 1-3/4
9 X 1-3/4
9 X 1-3/4
SLIM LINE TURNING 1.25 Tonne ASSEMBLIES (per AXLE)

Contains 2 hubdrums, 2 back plates, backweld plates, bearings, seals, dust caps, & wheel nuts.
C0801B
C0802B
C0803B
C0804B
C0805B
C0806B
STD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
L/ROVER
4 STUD JAP
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
HYDRAULIC DRUM
9 x 1-3/4
9 x 1-3/4
9 x 1-314
9 x 1-3/4
9 x 1-3/4
9 X 1-3/4
C0810B
ALL PATTERNS
HYDRAULIC DRUM
10x 2
PARALLEL TURNING 1500 Kg ASSEMBLIES

C0815
L/CRUISER, L/ROVER & F100 HYDRAULIC DRUM
Hub drums are studded only. No bearings etc

C0901
C0902
C0903
C0904
C0905
C0907
C0908
C0909
C0909A
C0910
C0910A
C0911
C0912
STANDARD HOLDEN HUB DRUM

HQ HOLDEN HUB DRUM
FORD HUB DRUM STUDDED
BLANK HUB DRUM
COMMODORE
BLANK DRUM
F100 HUB DRUM
L/CRUISER HUB DRUM
6 STUD
L/CRUISER HUB DRUM
5 STUD
ALKO HUBDRUM - UNDRILLED
ALKO HUBDRUM - ANY PATTERN
L/ROVER HUBDRUM
4 STUD JAP HUBDRUM
10 X 2
C3005
C3101
C3201
C3202
C3205
C3210
C3302
HOSE BRACKETS
AXLE TEE
SHORT TUBE NUTS : 3/8 for 9 brake plates
LONG TUBE NUTS : 3/8 for master cylinder
LONG TUBE NUTS METRIC
PIPE JOINER 3/8 to 3/8
BLEED SCREW SUIT C1001
C3401
C3402
C3404
C3404
COPPER TUBING
COPPER TUBING
BUNDY TUBING
BUNDY TUBING
3/16 30 METRES
3/16 PER METRE
3/16 24 METRES
3/16 per METRE
ADAPTERS
BRAKES
C1001-LH
C1001-RH
C1001B
9x1-3/4 HYDRAULIC BRAKE PLATE

9x1-3/4 HYDRAULIC BRAKE PLATE
9x1-3/4 HYD. WITH
HAND BRAKE
C1010-LH
C1010-RH
10 X 2 BACK PLATE HYDRAULIC

10 X 2 BACK PLATE HYDRAULIC
C1050A
BRAKE SHOES 9 X 1-3/4 PER AXLE
C3001
C3003
C3303
C3305
C3307
10 mm MALE 3/8 FEMALE

3/8 MALE 10 mm FEMALE
3/8 MALE - 3/8 MALE
HYDRAULIC DRUM BRAKES KITS

Does not include copper tubing.
C2901
SINGLE AXLE HYDR BRAKE KIT

Includes 1 x Brake Hose, Hose Bracket & Clip,
1 x Axle Tee, 5 x short & 1 long tube nut.
C2903
TANDEM AXLE BRAKE KIT

C2905
TRI - AXLE BRAKE KIT

BRAKE HOSE MALE TO FEMALE
HOSE CLIPS
30
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
MECHANICAL CABLE DRUM BRAKE ASSEMBLIES
Contains 2 hubdrums, 2 back plates, backweld plate, bearings, seals, dust caps, & wheel nuts.
STANDARD TURNING 1 Tonne ASSEMBLIES (PER AXLE)
C1301
C1302
C1303
C1304
STANDARD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
MECHANICAL DRUM
MECHANICAL DRUM
MECHANICAL DRUM
MECHANICAL DRUM
9 X 1-3/4
9 X 1-3/4
9 X 1-3/4
9 X 1-3/4
SLIM LINE TURNING 1.25 Tonne ASSEMBLIES (PER AXLE)

C1301B
C1302B
C1303B
C1304B
STANDARD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
MECHANICAL DRUM
MECHANICAL DRUM
MECHANICAL DRUM
MECHANICAL DRUM
9 x 1-3/4
9 x 1-3/4
9 x 1-3/4
9 x 1-3/4
BRAKES KITS
Kit includes cable, pulleys, adjuster and wire clamps.
C2910
C2912
SINGLE AXLE MECHANICAL BRAKE KIT

TANDEM AXLE MECHANICAL BRAKE KIT
MECHANICAL SPARES
C1514A
BRAKES SHOES PER AXLE (4 shoes)
C1515
MECHANICAL BRAKE ADJUSTER
C1519
MECHANICAL BRAKE ACTIVATOR

AL-KO Lever Type
C3501
C3502
CABLE 4mm PER METRE

CABLE 5mm PER METRE
C3503A
CABLE ADJUSTER
C3504
CABLE PULLEY
C3506
CABLE GRIP 5mm
C0901
C0902
C0903
C0904
C0905
C0907
C0908
C0909
C0909
C0910
C0910A
C0911
C0912
STANDARD HOLDEN HUB DRUM

HQ HOLDEN HUB DRUM STUDDED
FORD HUB DRUM STUDDED
BLANK HUB DRUM
COMMODORE
BLANK DRUM
F100 HUB DRUM
L/CRUISER HUB DRUM 6 STUD
L/CRUISER HUB DRUM 5 STUD
ALKO HUBDRUM - UNDRILLED
ALKO HUBDRUM - ANY PATTERN
L/ROVER HUBDRUM
4 STUD JAP
C1401-LH 9 X 1-3/4 MECHANICAL BACK PLATE

C1401-RH 9 X 1-3/4 MECHANICAL BACK PLATE
C1402
BRAKES
Use the same hub drum as hydraulic bakes
CENTRE PULL BACK PLATE MECH.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
31
ELECTRIC DRUM BRAKE ASSEMBLIES
Contains 2 hubdrums, 2 back plates, backweld plate, bearings, seals, dust caps, & wheel nuts.
C1601
C1602
C1603
C1605
STANDARD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
ELECTRIC DRUM
ELECTRIC DRUM
ELECTRIC DRUM
ELECTRIC DRUM
10 X 2
10 X 2
10 X 2
10 X 2

C1601B
C1602B
C1603B
C1605B
STANDARD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
ELECTRIC DRUM
ELECTRIC DRUM
ELECTRIC DRUM
ELECTRIC DRUM
10 x 2
10 x 2
10 x 2
10 x 2
PARALLEL TURNING 1.5 Tonne ASSEMBLIES (PER AXLE)

Uses LM68149 / 10 (slimline) bearing inner and outer.
C1610
L/CRUISER, L/ROVER & Fl00
ELECTRIC DRUM
ELECTRIC SPARES
C1701
C1702
C1703
C1705
C1706
C1710
C1710A
BRAKES
C1801-LH
C1801-RH
C1810-LH
C1810-RH
C1815-LH
C1815-RH
STD HOLDEN ELECTRIC HUB DRUM

HQ HOLDEN ELECTRIC HUB DRUM
FORD ELECTRIC HUB DRUM 10
LANDCRUISER HUB DRUM 10
LANDROVER ELECTRIC HUB DRUM
10 X 2
C2003
C2003A
C2003-LH
C2003-RH
MAGNET OVAL (10x2): GREEN WIRE

MAGNET ROUND WITH CAST LUG
MAGNET OFFROAD LEFT HAND
MAGNET OFFROAD RIGHT HAND
C2003B
MAGNET OVAL (12x2) :WHITE WIRE
C2005
BREAK - AWAY SWITCH
C2006
BATTERY FOR BREAK - SAFE
C2007
C2008
10X2 ACTUATING ARM : RIGHT

10X2 ACTUATING ARM : LEFT
C2010
10X2 SHOES : PER AXLE
C2012
10X2 ADJUSTER LINK
C2020
VOLTAGE REDUCER 24V TO 12V
C2024
CIRCUIT BREAKER
L/CRUISER PARALLEL HUB DRUM

L/ROVER PARALLEL HUB DRUM 10
10x2-1/4 ELECTRIC BRAKE : ALKO

10x2-1/4 ELECTRIC BRAKE : ALKO
10x2-1/4 OFFROAD BRAKE : ALKO
10x2-1/4 OFFROAD BRAKE : ALKO
10x2-1/4 ELECTRIC BRAKE :
10x2-1/4 ELECTRIC BRAKE
20 AMP
32
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
C2801A
HAYER LEMMERZ ENERGIZE III

1-2 AXLES
The Energize III easily adjustable
pendulum leveling system has a Visual
Level Indicator to assure safe easy
leveling. You know its right with just a
glance! Roller style gain control allows easy custom tuning
to your braking requirements
C2801C
TEKONSHA VOYAGER 9030

1-3 AXLES
Recessed controls protect gain and level
settings from accidental readjustment.
Broad control range makes setting quick
and easy.
The green LED display tells you that the unit is on and there
is a complete circuit with the trailer brakes. As braking
power is applied, the LED changes color gradually from
green to red, to indicate braking power.
C2801D
REDARS EB1AX
1-2 AXLES
Miniature solid-state. 50x 100 x 30mm
Can mount in any direction and requires
no mechanical set up. Made in Australia
C2805
TEKONSHA PRODIGY 90185

1-4 AXLES
Applies power to the trailer brakes in
proportion to vehicles deceleration. No
level adjustment necessary - it adjusts
itself to varying terrain as you drive.
The only inertial control that works
proportionally in reverse. Digital display depicts voltage
delivery to trailer during braking. Continual diagnostics check
for proper connection, shorted magnet condition and much
more. Boost feature gives users the ability to apply more
initial trailer braking power when towing heavier trailers.
C2801E
HAYMAN REECE 1-2 AXLES
Solid-state. Munt in any direction.
Complete with Sync-Control the
driver can control the rate of brake
application from soft to aggressive.
Trailer brakes may also be manually. This also activates
the trailer and tow vehicles stop lights when brakes are
applied 75x130x30mm
C2810
ATS BRAKE CONTROLLER

1-2 AXLES
Small solid-state. 50x100x30mm
Suitable for mounting on trailer drawbar
or in the vehicle. Made in Australia
TYPICAL ELECTRIC BRAKE WIRING DIAGRAM
TROUBLE SHOOTING ELECTRIC BRAKES
Open circuit.
Improperly wired or inoperative.
Poor brake adjustment.
Worn/defective magnet.
Short circuit.
REPAIR PROCEDURE
Check for broken wire, loose connection,
improper grounding, faulty connector
between car & trailer etc.
Rewire controller, check controller.
Adjust brakes. Check resistor for
Loose connections.
Selective resistor defective.
Replace magnets.
Check electrical circuit.
INTERMITTENT OR SURGING BRAKES

POSSIBLE CAUSE
REPAIR PROCEDURE
Out of round drums.
Turn or replace drums.
Inadequate trailer ground.
Check for proper grounding.
Broken magnet lead wire.
Bench check magnet & replace if
necessary.
Loose wheel bearings.
Check & adjust bearings.
WEAK BRAKES
POSSIBLE CAUSE
REPAIR PROCEDURE
Loose connections.
Inadequate trailer ground.
Short circuit.
Selective resistor setting incorrect.
Worn or defective magnet.
Poor brake adjustment.
Bent backing plate.
Contaminated linings.
Using trailer brakes only.
Check that all connections are clean

and tight. Check for proper grounding.
Check electrical circuit.
Check for proper setting to avoid too
Replace magnets. Adjust brakes.
Check backing plate flange. Correct
if necessary.
Check & replace badly contaminated
linings.
BRAKES
NO BRAKES
POSSIBLE CAUSE
Check to be sure trailer is not under

braked.
Use of trailer brakes only can cause
fade or loss of friction due to
excessive heat.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
33
STANDARD HYDRAULIC DISC BRAKE ASSEMBLIES
Contains : 2 hub-disc, 2 calipers, caliper mount plates, bearings, seals, dust caps, & wheel nuts.
ALKO CALIPERS
C2101
C2102
C2103
C2104
STANDARD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
260mm x 13mm DISC & ALKO DACROMET CALIPER

MARINISED HYDRAULIC CALIPER DISC ASSEMBLIES

Nominate stud pattern when ordering
C2120
C2121
C2122
C2123
TRIGG GALVANISED
TRIGG L/C
ALKO STAINLESS
ALKO STAINLESS L/C
260mm x 13mm DISC & TRIGG GALVANISED CALIPER

280mm x 13mm DISC & TRIGG GALVANISED CALIPER
260mm x 13mm DISC & ALKO STAINLESS CALIPER
280mm x 13mm DISC & ALKO STAINLESS CALIPER
PBR HYDRAULIC CALIPER DISC ASSEMBLIES

C2150
C2152
PBR BRAKES 13/14

PBR BRAKES L/C
260mm x 20mm DISC & PBR VN CALIPER

280mm x 20mm DISC & PBR VN CALIPER
SLIMLINE DISC BRAKES : HYDRAULIC
Contains : 2 hub-disc, 2 calipers, caliper mount plates, bearings, seals, dust caps, & wheel nuts.
ALKO CALIPERS
C2101B
C2102B
C2103B
C2104B
STANDARD HOLDEN
HQ HOLDEN
FORD
L/CRUISER
260mm DISC & ALKO DACROMET CALIPER

MARINISED HYDRAULIC CALIPER DISC ASSEMBLIES

C2120B
C2121B
C2122B
C2123B
TRIGG GALVANISED
TRIGG L/C
ALKO STAINLESS
ALKO STAINLESS L/C
260mm DISC & TRIGG CALIPER

280mm DISC & TRIGG CALIPER
260mm DISC & ALKO STAINLESS CALIPER
280mm DISC & ALKO STAINLESS CALIPER
PBR HYDRAULIC CALIPER DISC ASSEMBLIES

BRAKES
C2150B
C2152B
PBR BRAKES 13/14 S/L 260mm DISC & PBR VN CALIPER

PBR BRAKES L/C S/L 280mm DISC & PBR VN CALIPER
34
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
MECHANICAL DISC BRAKE ASSEMBLIES
Contains : 2 hub-disc, 2 straight arm calipers, mount plates, bearings, seals, dust caps, & wheel nuts.
C2106
C2107
C2108
C2110
C2112
C2114
STANDARD HOLDEN
HQ HOLDEN
FORD
VELOX WHEELS
JAP
L/CRUISER 6 STUD
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
260mm
260mm
260mm
260mm
260mm
280mm

STANDARD HOLDEN
HQ HOLDEN
FORD
VELOX WHEELS
JAP
L/CRUISER 6 STUD
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
MECHANICAL DISC
DISC SPARES
PBR CALIPERS USE 22mm DISC
C2201
C2202
C2203
C2204
C2204A
DISC/HUB
DISC/HUB
DISC/HUB
DISC/HUB
DISC/HUB
STANDARD
HQ
FORD
L/CRUISER
L/C 5 STUD
22mm
22mm
22mm
22mm
22mm
C2205
C2206
C2207
C2207B
C2207C
C2207D
C2207G
DISC/HUB
DISC/HUB
DISC/HUB
DISC/HUB
DISC/HUB
DISC/HUB
DISC/HUB
STANDARD
HQ
FORD
BEEHIVE
4 STUD JAP
L/C 6 STUD
L/C 5 STUD
13mm
13mm
13mm
13mm
13mm
13mm
13mm
C2303A
C2303C
CALIPER MECHANICAL - TRIGG

CALIPER MECHANICAL - ALKO
C2285
CALIPER: HYDRAULIC ALKO Stainless Steel.

Uses 12 15 mm disc
Left & right hand interchangeable
C2286
260mm
260mm
260mm
260mm
260mm
280mm
CALIPER HYDRAULIC ALKO

Dacromet finish
Left & right hand interchangeable
C2288
C2289
C2290
C2292
C2305
C2306
CALIPER: HYDRAULIC PBR

MARINISED
MARINISED
VN- R.H
VN -L.H.
V8 - R.H.
V8 - L.H.
CALIPER HYDRAULIC TRIGG - R.H

CALIPER HYDRAULIC TRIGG - L.H
Both are Galvanised. Use 13mm disc.

C2310
PBR CALIPER PADS PER AXLE
C2311A MECHANICAL PADS PER AXLE
C2314
C2315
C2318
C2320
C2322
C2324
C2330
TRIGG MECHANICAL S/S SLIDES

MECHANICAL MOUNT BOLTS
TRIGG MECH PRESSURE PAD
MECHANICAL 90 degree ARM
MECHANICAL STRAIGHT ARM
MECHANICAL BOLT LOCK TAB
ALKO STAINLESS SLIDES
C2350
C2352
BRONZE DISC BARE 225mm

BRONZE DISC BARE 275mm
BRAKES
C2106B
C2107B
C2108B
C2110B
C2112B
C2114B
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
35
HEAVY DUTY BRAKES

HUB DRUM ASSEMBLY
Per Wheel
HA200
12x2 ELECTRIC HUBDRUM ASSEMBLY (2000KG PER AXLE)

H0806A
Hub drum 12x2 (one piece)
1
H0816
Bearing & seal kit
25580/20 LM67048/10
C0604
1/2 wheel nuts
H1220-LH TRAILTEC 12x2 electric plate
or
H1220-RH TRAILTEC 12x2 electric backing plate
H1303
Back weld plate 50mm square
HA200A
12x2 HYDRAULIC HUBDRUM ASSEMBLY (2000KG PER AXLE)

H0806A
Hub drum 12x2 (one piece)
H0816
Bearing & seal kit
25580/20 LM67048/10
C0604
1/2 wheel nuts
H1245-LH 12x2 hydraulic backing plate
or
H1245-RH 12x2 hydraulic backing plate
H1303
Back weld plate 50mm square
HYDRAULIC DRUM BRAKES
Per Wheel. Suit 1500Kg, 2000Kg & 3000Kg hubs. Drilled to suit your hub. Hubs not included.
HC050
BRAKE ASSEMBLY 9 X 1-3/4 HYDRAULIC

C1001
Brake plate assembly 9 x 1-3/4
C0907
Brake drum 9 X 1-3/4
C1102
Backweld plate to suit 45mm sq
HC150
BRAKE ASSEMBLY 10 X 2 HYDRAULIC

C1010
Brake plate assembly 10 x 2 1
C1704
Brake drum assembly 10 x 2 1
C1901
Mount plate to suit 45mm sq. 1
HC100
BRAKE ASSEMBLY 11 X 2 HYDRAULIC

H1115
H1101
Brake drum 11 x 2
H1301
Backweld plate
HC450
HC700
BRAKE
BRAKE
1
1
1
1
1
ASSEMBLY 12 X 2 HYDRAULIC
H1245
H1240
Brake drum 12 x 2
H1303
Back weld plate
1
1
ASSEMBLY 12-1/4 x 4 HYDRAULIC

H1270
Brake plate assembly 12-1/4 x 4
H1275
Brake drum 12-1/4 x 4
1
1
MECHANICAL DRUM BRAKES
Per Wheel. Suit 1500Kg, 2000Kg & 3000Kg hubs. Drilled to suit your hub. Hubs not included.
BRAKES
HC055
HC105
BRAKE ASSEMBLY 9 X 1-3/4 MECHANICAL : LEVER PULL

C1401
Back plate mech. 9 x 1-3/4
C0907
Brake drum 9 x 1-3/4
C1901
Mech mount plate suit 45mm sq.
1
1
1
BRAKE ASSEMBLY 11 X 2 MECHANICAL : CENTER PULL

H1110
H1101
Brake drum 11 x 2
H1301
Backweld plate
1
1
36
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
ELECTRIC DRUM BRAKES
Per wheel. Suit 1500Kg, 2000Kg & 3000Kg hubs. Drilled to suit your hub. Hubs not included.
Under-rated brakes will down rate the axle
HC300
HC400
HC900
BRAKE ASSEMBLY 10 x 2 ELECTRIC

C1801
Back plate electric 10 x 2-1/4
C1704
Brake hub-drum 10 x 2 cast
C1901
Elec. Mount plate 45mm sq.
1
1
1
BRAKE ASSEMBLY 12 x 2 ELECTRIC

H1210
Brake plate 12 electric
H1220
Blank drum 12 electric
H1303
Back weld plate
1
1
1
BRAKE ASSEMBLY 12-1/4 x 3-3/8 ELECTRIC (3T/PR)
DISC BRAKES
Per wheel. Suit 1500Kg, 2000Kg & 3000Kg hubs. Drilled to suit your hub. Hubs not included.
Under-rated brakes will down rate the axle
HC803
HC805
HC810
HC820
HC825
HC830
HC840
BRAKE ASSEMBLY 10 HYDRAULIC DISC - ALKO (1.5T/PR)

C2286
ALKO dacromet hydraulic caliper
H1285B
Disc : Cast 280 x 13mm
H1309/A
Comb caliper mount plate 45/50 mm
1
1
1
BRAKE ASSEMBLY 10 HYDRAULIC DISC - PBR VN (1.0T/PR)

C2288
Right or C2289 Left hand caliper
H1285
H1308/A
Comb caliper mount plate 45/50mm
1
1
1
BRAKE ASSEMBLY 10 HYDRAULIC DISC - PBR V8 (1.5T/PR)

C2290
H1285
H1308/A
1
1
1
BRAKE ASSEMBLY 10 HYDRAULIC DISC - ALKO (2T/PR)

C2286
ALKO dacromet hydraulic caliper
H1285B
H1309/A
2
1
2
BRAKE ASSEMBLY 10 HYDRAULIC DISC - PBR V8 (3T/PR)

C2290
H1285
H1308/A
Same as HC805 but using TWO V8 calipers per disc
2
1
2
BRAKE ASSEMBLY 10 HYDRAULIC DISC - ALKO STAINLESS

C2285
ALKO stainless caliper
H1285B
H1309/A
1
1
1
BRAKE ASSEMBLY 10 HYDRAULIC DISC - TRIGG GAL CALIPER

C2305/6
TRIGG galvanised stainless caliper
H1285B
H1308/A
1
1
1
BRAKE ASSEMBLY 10 MECHANICAL DISC (1T/PR)

C2303C
Mechanical calipers
H1285B
H1308/A
1
1
1
BRAKES
HC800
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
37
BRAKE SELECTION : GUIDE ONLY
Under-rated brakes will down rate the axle. Dont skimp on brakes.
Determining which braking system is the best for your trailer depends upon your particular needs, including the gross
mass of your trailer, wheel size and your particular application.
All trailers with a gross mass of over 750 Kg require effective brakes. All trailers over 2000 Kg require a break-a-way
brake system with brakes on all wheels. All trailers over 4500 Kg require ADR 38 certified suspension and foundation
brake equipment. No axles, spring and brakes combinations in this book are ADR certified.
The capacity of the suspension is determined by its weakest link. Under-rated brakes will down rate the axle.
We recommend that all Breakaway systems be fitted by a specialist.
BRAKE SIZES
CAPACITY PER AXLE

Kg PER AXLE
13 / 14 RIMS
15 / 16 RIMS
HYDRAULIC DRUM
9 X 1-3/4
10 X 2
11 X 2
1450
1500
N/A
1200
1500
2000
MECHANICAL DRUM
9 X 1-3/4
11 X 2
1200
N/A
1000
2300
ELECTRIC DRUM
10 X 2-1/4
12 X 2
1600
N/A
1400
2500
MECHANICAL DISC
ALKO
1250
1000
HYDRAULIC DISC
ALKO
PBR VN
PBR V8
TRIGG
1500
1000
1500
1250
1200
1000
1500
1000
The capacity of the suspension is determined by its weakest link. Under-rated brakes will down rate the axle.
These brake sizes are approximate. The braking requirements can vary according to many factors such as rim size, tyre
size, road surface and application method.
It is the manufacturers responsibility to determine what is appropriate for their particular application.
Axle
Capacity
9 Hyd
Drum
9 Mech
Drum
10 Elect
Drum
10 Hyd
Drum
Standard
Slimline
Velox
1500Kg
Parrallel
2000 Kg
3000 Kg
160
160
155
155
172
172
172
172
183
195
203
175
203
175
11 Hyd 11 Mech 12 Elect 12 Elect 12 Hyd

Drum
Drum
Hub
Drum
Drum
Drum
203
209
209
215
205
224
230
224
230
ALKO
Hyd
Disc
TRIGG
Hyd
Disc
232
232
277
266
210
210
255
232
278
245
BRAKES
Please Note : Dimensions are approximate and for our parts only
38
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
COMPRESSED AIR BRAKE EQUIPMENT

Prime mover kit - hand and foot control: The kits include a hand and foot control valve (incorporating tractor protection)
and a trailer stop light switch to suit double line, compressed air trailer using nylon tubes and fittings. These kits suit any
prime mover if hand and foot control of trailer brakes is required.
Couplings are NOT SUPPLIED in prime mover or trailer kits.
H1902
H1909
H1906
AIR KIT FOR TRAILER

AIR KIT FOR TRUCK WITH COMPRESSOR
TRAILER SUZIE COUPLING KIT
Installation by qualified persons required
BRAKE MOUNT PLATES

C1501
C1502
C1901
MECHANICAL & ELECTRICAL DRUM

: 40 mm SQUARE AXLE
: 39 mm ROUND AXLE
: 45 mm SQUARE AXLE
C2403
C2403A
C2403
C2403A
CALIPER MOUNT MECHANICAL

CALIPER MOUNT ALKO HYDRAULIC
CALIPER MOUNT ALKO HYDRAULIC
: 40 mm SQUARE AXLE
: 45 mm SQUARE AXLE
: 40 mm SQUARE AXLE
: 45 mm SQUARE AXLE
C2404
C2404A
C2407
CALIPER MOUNT VN COMMODORE

CALIPER MOUNT VN COMMODORE
CALIPER MOUNT V8 COMMODORE
: 40 mm SQUARE AXLE
: 45 mm SQUARE AXLE
: 45 mm SQUARE AXLE
C1101
C1102
C1104
HYDRAULIC DRUM : 9
HYDRAULIC DRUM : 9
HYDRAULIC DRUM : 9
: 40 mm SQUARE AXLE
: 45 mm SQUARE AXLE
: 39 mm ROUND AXLE
H1301
H1303
H1303
HYDRAULIC DRUM : 11
HYDRAULIC DRUM : 12
ELECTRIC DRUM : 12
: 50 mm SQUARE AXLE
: 50 mm SQUARE AXLE
: 50 mm SQUARE AXLE
H1308
H1308
CALIPER MOUNT TRIGG & COMMODORE : 50 mm SQUARE

CALIPER MOUNT TRIGG & COMMODORE : 45 mm SQUARE
H1309
H1309A

BRAKES
(Welds to axle for brakes to bolt to.)
: 50 mm SQUARE
: 45 mm SQUARE
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
39
H1960-A
H1960-M
SENS-A-BRAKE COMPLETE for AUTOMATIC

SENS-A-BRAKE ASSEMBLY for MANUAL
H1962
H1962A
H1964
H1966
H1968
SENS-A-BRAKE IN CAR KITMANUAL

SENS-A-BRAKE IN CAR KITAUTO
SENS-A-BRAKE MANUAL BRAKE PAD
SENS-A-BRAKE AUTOMATIC BRAKE PAD
SENS-A-BRAKE 24-12V CONVERTER
Maximum hydraulic pressure

Response time @ 1000 psi
Reservor capacity
Number of braked axle contollable
Hydraulic displacement
Electrical supply requirement
Breakaway system
No battery required in breakaway
Operates in reverse
Proportional braking
Control independent of road gradient
Trailer sway control (panic button)
1000 psi
<1.0 sec
90 ml
3
11.4 ml
12V 20 amp
Yes
Yes
Yes
Yes
Yes
Yes
The Sens-a-Brake utilizes compressed air as its central energy source enabling it to produce an instantaneous braking
response. The compressed air energy source is also utilized by the breakaway system. This eliminates the need for a
separate power supply. The Sens-a-Brake is activated through pressure applied to the brake pedal of the tow vehicle.
This makes it a true proportional braking system that operates in all braking situations.
LT-1000E
Electronic Controller compatible model

The AL-KO Sensabrake EAS LT-1000E is
designed to be fully integrated with your existing
Electronic Brake Controller. This model features a
breakaway via the electric plug, and will work with
any AL-KO approved motion sensing electronic
brake controller. The LT-1000E is the perfect solution
for towed vehicles already fitted with an AL-KO
Approved Motion Sensing Electric Brake Controller.
SENSABRAKE LT-1000E Trailer Unit
SENSABRAKE LT-1000E Vehicle Unit
BRAKES
H1950
H1951
40
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
BREAK - SAFE
New Model
Electric Brake Break - Away System
H1915
H1917
MODEL 5000
MODEL 5000 XP
1 & 2 axles.
3 axles
H1918
C2005
C2006
RM5000 Remote battery sensor

Break-Away switch
Battery for Break-Safe
Break - Away will automatically apply the electric brakes and brake
lights on the trailer in the event of an accidental separation from the
towing vehicle. The unit is compact and suits caravans, trailers and
horse floats. Break-Safe can be used with all electric brakes and
requires no modification to the trailer besides ensuring that the unit is
mounted in a protected area. Break-Safe uses pin 5 of a standard seven pin plug. Enclosed in the unit is a long life gel
cell battery which recharges off the car battery. The unit includes a manual test circuit and on charge indicator.
The battery is able to be charged externally. We recommend the unit be installed by an auto electrician.
Break away brakes are required on all licensed trailers
over 2000kg aggregate. The unit includes a break-away
switch which connects to the vehicle via a wire loop.
In the event of a break away the pin is pulled from the
switch activating Break - Safe system
Hydrastar
H1910
H1910
HYDRASTAR & BREAKSAFE

HYDRASTAR & USA BREAKAWAY
H1913
HYDRASTAR XL HydraStar XL allows the trailer to be towed

by any vehicle without the use of a hard wired in-cab
controller. HydraStar XL uses its own portable controller
which plugs into the cigarette lighter of the tow vehicle.
H1911
H1911A
H1912
H1914C
HYDRASTAR 1200 psi Generation 7 PUMP UNIT

HYDRASTAR 1600 psi Generation 7 PUMP UNIT
HYDRASTAR BATTERY
HYDRSTAR COVER
Controller Not Included
BRAKES
The HYDRASTARs electro-hydraulic operation eliminates many of the problems faced by traditional override brakes and is
a cheaper alternative to vacuum or air brakes.
The HYDRASTAR eliminates problems associated with backing a trailer uphill typical with surge brake systems. A solenoid
valve instantly applies and releases the trailer brakes every time the unit is actuated and controlled by In cab electronic
brake control module. Ideal for use on boat trailers. Includes an Emergency Brakeaway System which automatically
locks the brakes on the trailer in the event that the trailer becomes separated from the towing vehicle. The unit maintains
pressure to the trailer brakes for 15 plus minutes.
Specifications:
12 Volt dc / 15 amp operation. Use DOT 3 and DOT 4 brake fluid.
3/16 diameter x 45 degree inverted flare output port.
15.5 inches long x 3.0 inches wide x 5.4 inches high.
Control options using standard electronic Brake controller (in-cab control )
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
41
RIMS
C3600
C3600A
C3600B
C3600C
C3600H
HOLDEN HR
HOLDEN HT
HOLDEN HQ
FORD
L/C 5 STUD
ALLOY
ALLOY
ALLOY
ALLOY
ALLOY
13 X 4.5
14 X 5
14 X 5
14 X 5
16 X 7
C3601D FORD
C3601F FORD
C3601G LANDCRUISER
GALVANIZED
GALVANIZED
GALVANIZED
14 X 6
13 X 5
15 X 7
C3602
C3603
C3604
BLACK
BLACK
BLACK
13 X 4.5
14 X 5
14 X 5
C3606 FORD
C3606B FORD
C3606C FORD
BLACK
WHITE
WHITE
14 X 5
14 X 6
13 X 4.5
Trailer Only
Trailer Only
C3647
C3648
C3649
LANDCRUISER
LANDCRUISER
LANDCRUISER
WHITE
WHITE
WHITE
15 X 7
14 X 6
16 X 6
Trailer Only
Trailer Only
Trailer Only
C3612
C3613
C3615
C3619
C3622A
8 ALLOY RIM, TYRE AND BEARINGS

8 ALLOY RIM AND BEARINGS (INTERGRATED HUB)
8 ALLOY HT PATTERN
8X4
9 ALLOY HT PATTERN
9 X 4.5
10 ALLOY HT PATTERN
10 X 4
HOLDEN HR
HOLDEN HT
HOLDEN HQ
Trailer Only
Trailer Only
Trailer Only
Trailer Only
Trailer Only
Trailer Only
WHEELS & RIMS
NEW TYRE & TUBES

C3630
C3631
C3632
TYRE & TUBE

TYRE & TUBE
TYRE & TUBE
400 X 8
600 X 9
500 X 10
6 PLY HIGHWAY
6 PLY HIGHWAY
6 PLY HIGHWAY
C3686
C3688
C3690
TYRE & TUBE

TYRE & TUBE
TYRE & TUBE
195 X 15
185 X 14
155 X 13
LIGHT TRUCK
LIGHT TRUCK
LIGHT TRUCK
PART No
MODEL
SIZE
C3601
C3601A
C3601B
C3601C
C3601D
C3601F
C3601G
HR
HT
HQ
Falcon
Ford
Falcon
L/C
13 X 4.5
14 X 5
14 X 5
14x4.5
14x6
13x4.5
15 x 7
Gal
Gal
Gal
Gal
Gal
Gal
Gal
88
106
92
90
105
65
100
51
46
60
64
74
65
95
C3602
C3603
C3604
C3606
C3606B
C3606C
C3647
C3648
C3649
HR
HT
HQ
Ford
Ford
Ford
L/C
L/C
L/C
13 X 4.5
14 X 5
14 X 5
14x 5
13x4.5
14x6
15 x 7
14 X 6
16 x 6
Paint
Paint
Paint
Paint
Paint
Paint
Paint
Paint
Paint
88
106
92
90
65
104
100
104
95
51
46
60
64
65
77
95
74
85
yes
yes
yes
yes
yes
750
850
850
900
1700
C3615
C3619
C3622A
C3622B
HT
HT
HT
MINI
8 X 4
9 X 4.5
10 X 4
10 X 4
Alloy
Alloy
Alloy
Alloy
30
58
52
52
70
81
52
52
yes
yes
yes
yes
375
500
450
450
TRAILER CAPACITY
ONLY
yes
yes
yes
850
700
850
42
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
MUDGUARDS
C3700
C3701
C3702
C3704
C3710
C3710A
C3711
SINGLE
SINGLE
SINGLE
TANDEM
SINGLE
SINGLE
TANDEM
AXLE
AXLE
AXLE
AXLE
AXLE
AXLE
AXLE
8 WHEEL
10 WHEEL
13 & 14 WHEEL
13 & 14 WHEEL
16 WHEEL
16 WHEEL
16 WHEEL
PLAIN
GALVANISED
GALVANISED
GALVANISED
GALVANISED
NARROW
GALVANISED
C3716
C3717
SINGLE AXLE 13 WHEEL WHITE POLYETHYLENE

SINGLE AXLE 14 WHEEL WHITE POLYETHYLENE
MUDGUARD DIMENSIONS
PART NO
DESCRIPTION
Front
Top
Back
Width
Lip
O/A Length
Gauge
Finish
C3700
C3701
C3702
C3704
C3710
C3710A
C3711
8 Single Axle
10 Single Axle
13-14 Single Axle
13-14 Tandem Axle
15-16 Single Axle
15-16 Single Axle
15-16 Tandem Axle
260
325
355
355
500
500
500
210
350
450
1260
500
500
1460
260
430
430
430
620
620
620
150
230
230
230
300
230
300
25
30
30
30
30
30
30
500mm
670mm
800mm
1600mm
1000mm
1000mm
2000mm
1.2mm
1.2mm
1.2mm
1.2mm
1.6mm
1.6mm
1.6mm
Black
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
CASTOR WHEELS
C5010
C5011
CASTOR 100mm SWIVEL WHITE

CASTOR 100mm FIXED WHITE
C5012
C5013
CASTOR 100mm SWIVEL GREY

CASTOR 100mm FIXED GREY
C5014
C5015
CASTOR 100mm SWIVEL RUBBER

CASTOR 100mm FIXED RUBBER
C5020
C5021
CASTOR 75mm FIXED

WHITE
CASTOR 75mm SWIVEL WHIT
C5022
C5023
C5024
C5025
C5030
CASTOR 63mm FIXED

CASTOR 63mm SWIVEL
CASTOR 75mm SWIVEL
CASTOR 75mm FIXED
CASTOR 63mm FIXED
RUBBER
RUB
RUB
RUBBER
NYLON
C5031
C5032
C5033
C5034
C5035
C5036
C5037
CASTOR 63mm SWIVEL

CASTOR 50mm SWIVEL
CASTOR 50mm FIXED
CASTOR 50mm SWIVEL
CASTOR 50mm FIXED
CASTOR 50mm FIXED
CASTOR 50mm SWIVEL
NYLON
NYLON
NYLON
RUBBER
RUBBER
ALLOY
ALLOY
NON FLAT RUBBER TROLLEY WHEELS

C4051
C4061
C4074
RIM & TYRE

RIM & TYRE
RIM & TYRE
16/6.50 X 8
3.50 X 4
4.00 X 8
BRANDED TRAILER / CARAVAN SPRINGS

D0012
D0014
COROMAL HS5 TWIN SLIPPER

COROMAL HS7 TWIN SLIPPER
D0020
D0022
D0024
D0024
D0024
D0030
D0030
ALKO 6 LEAF SLIPPER 770 x 60 x 6mm

ALKO 6 LEAF D/E OUTBACK
ALKO 8 LEAF D/E OUTBACK
ALKO 5 LEAF TANDEM ASSY
ALKO 6 LEAF TANDEM ASSY
D0040
D0040
D0040
D0040
DUNBIER 3 LEAF GALVANISED SLIPPER 760 x 45 x 6mm

MUD GUARDS
(Used by Jayco)
(Used by Jayco)
(Used by Jayco)
(Used by Jayco)
(Used by Jayco)
(Used by Jayco)
(Used by Jayco)
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
43
SINGLE AXLE SLIPPER ASSEMBLY
Assembly is 2 springs, hangers, pins and nuts

D0101
D0103
D0105
D0107
D0109
D0111
D0113
D0115
2 leaf assembly
3 leaf assembly
4 leaf assembly
6 leaf assembly
8 leaf assembly
10 leaf assembly - long
6 leaf assembly - long
5 leaf assembly
260 kg per pair

400 kg per pair
540 kg per pair
800 kg per pair
1100 kg per pair
1300 kg per pair
680 kg per pair
680 kg per pair
D0101 uses
D0103 uses
D0105 uses
D0115 uses
D0107 uses
D0113 uses
and
D0102
D0104
D0106
D0116
D0108
D0114
2 leaf slipper
3 leaf slipper
4 leaf slipper
5 leaf slipper
6 leaf slipper
6 leaf slipper
D1401
D1402
D1001
D0903
D0109 uses
D0111 uses
and
D0110
D0112
8 leaf slipper spring only

2
2
D1404
Spring hanger 9/16
2
D1101
Shackle Pin 9/16
2
D0904
Nylon bush 3/4 x 9/16 x 45mm
spring only
spring only
spring only
spring only
spring only
spring only
Slipper hanger Rear : No hole
Spring hanger 1/2
Spring Bolt
1/2
Nylon bush 1/2 x 3/4 x 45mm
2
2
2
2
2
2
2
2
2
SINGLE SLIPPER SPRING : LEAVES 45 X 6mm

D0102
D0104
D0106
D0116
D0108
D0110
2 leaf slipper
3 leaf slipper
4 leaf slipper
5 leaf slipper
6 leaf slipper
8 leaf slipper
spring only
spring only
spring only
spring only
spring only
spring only
725 x 45 x 6mm
725 x 45 x 6mm
725 x 45 x 6mm
725 x 45 x 6mm
725 x 45 x 6mm
725 x 45 x 6mm
D0112
D0114
D0118
D0122

850 x 45 x 6mm
850 x 45 x 6mm
930 x 45 x 6mm
620 x 45 x 6mm
D0124
850 x 45 x 8mm
SINGLE SLIPPER SPRING - GALVANIZED : LEAVES 45 X 6mm
SUSPENSION
D0104G
D0106G
D0108G
D0110G
D0116G

725mm x 45 x 6mm
725mm x 45 x 6mm
725mm x 45 x 6mm
725mm x 45 x 6mm
725mm x 45 x 6mm
44
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
SLIPPER TANDEM ASSEMBLY

D0603
D0605
uses
6 LEAF TANDEM SLIPPER ASSEMBLY 1500 Kg

8 LEAF TANDEM SLIPPER ASSEMBLY 2000 Kg
D1404 Spring hanger 9/16
D1101 Shackle Pin 9/16
D0904 Nylon bush 3/4 x 9/16 x 45m
4
4
SLIPPER TANDEM SPRING ONLY : LEAVES 45 X 6 mm

D0604
D0606
6 leaf slipper spring only 800 mm

8 leaf slipper spring only 800 mm
Not recommended for tri axle or rough outback roads.

Tandem slipper springs place undue loads on A frames & chassis.
SINGLE LEAF SLIPPER PARABOLIC ASSEMBLY : 45mm wide

D0151
D0153
D0155
D0152
D0154
D0156
SINGLE LEAF SPRING ASSEMBLY

600 kg
1 000 kg
1400 kg
D0151 uses
D0152 Single leaf spring only
D0153 uses
D0155 uses
and
D1401 Spring hanger : No hole
D1402 Spring hanger 1/2
D1001 Spring bolt 1/2
D0903 Spring bush 1/ x 3/4 x 45mm
2
2
2
2
2
2
SINGLE LEAF SPRING ONLY 600 Kg per pair

SINGLE AXLE DOUBLE EYE ASSEMBLY

4 LEAF ASSEMBLY 500 Kg PER PAIR

D0401 uses
D0403 uses
D0405 uses
and
D0402
D0404
D0406
D1404
D1501
D1302
D1101
D0904
4 Leaf D/E spring 45 X 6 mm (715mm)

Spring hanger 9/16
Perch Block 9/16
Shackle plateLong
Shackle pin
Bush : Nylon 3/4 x 9/16 x 45mm
2
2
2
2
2
4
6
SUSPENSION
D0401
D0403
D0405
SINGLE AXLE DOUBLE EYE SPRING ONLY

D0402
D0404
D0406
4 LEAF DOUBLE EYE SPRING 715mm

Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
45
TANDEM AXLE DOUBLE EYE ASSEMBLY
Assembly is 4 springs, hangers, rockers pins and nuts. Springs are 625 x 45 x 6mm
D0801-14
D0801-16
D0801B
D0801G-14
D0801G-16
5 LEAF ASSEMBLY
5 LEAF ASSEMBLY
5 LEAF ASSEMBLY OFFSET SPRINGS
5 LEAF ASSEMBLY
5 LEAF ASSEMBLY
1500 Kg
1500 Kg
1500 Kg
1500 Kg
1500 Kg
D0804-14
D0804-16
D0804B-14
D0804C
D0804G-14
D0804G-16
7 LEAF ASSEMBLY
7 LEAF ASSEMBLY
7 LEAF ASSEMBLY
7 LEAF ASSEMBLY
7 LEAF ASSEMBLY
7 LEAF ASSEMBLY
All nylon bushes

OFFSET SPRINGS
GALVANISED
GALVANISED
2000 Kg
2000 Kg
2000 Kg
2000 Kg
2000 Kg
2000 Kg
D0807-14
D0807-16
D0807B
9 LEAF ASSEMBLY
9 LEAF ASSEMBLY
9 LEAF ASSEMBLY OFFSET SPRINGS
2500 Kg
2500 Kg
2500 Kg
D0802 / G
D1404
D1301
D1101
D1601
D1706
5 leaf spring 45 x 6mm

Spring hanger
Shackle Plate
Shackle Pin 9/16
Rocker hanger
Rocker Arm
D0805 / G
D0808
D1404
D1301
D1101
D1109
D1602
D1702B
D1702C
7 leaf spring 45 x 6mm 4

9 leaf spring 45 x 6mm 4
Spring hanger
4
Shackle Plate
8
Shackle Pin 9/16
12
Shackle Pin 3-1/2 x 3/4 2
Rocker hanger 3/4
2
Rocker Arm Short (suit 14) 2
Rocker Arm Long (suit 16) 2
BRASS BUSHING ASSEMBLY : With Greaseable Pins

D0821
D0824
D0827
5 LEAF ASSEMBLY WITH BRASS BUSHES

TRI AXLE ASSEMBLIES

D0840
D0842
D0844
5 LEAF TRI AXLE ASSEMBLY

2000 Kg PER SET

3000 Kg PER SET
3750 Kg PER SET
TANDEM AXLE DOUBLE EYE SPRING ONLY
SUSPENSION
D0802
D0805
D0808
D0815
D0802G
D0805G
D0818
D0819
D0820
5 LEAF SPRING DOUBLE EYE

TANDEM 625 mm
TANDEM 625 mm
TANDEM 625 mm
TANDEM 625 mm
TANDEM 625 mm
TANDEM 625 mm
OFFSET 625 mm
OFFSET 625 mm
OFFSET 625 mm
GALVANISED
GALVANISED
Assembly
Wheels
Front / Rear to Center Hanger
Spring Bolt to Chassis
Axle to Axle
D0801
D0804
D0807
14
14
14
725
725
725
175
175
175
835
835
835
D0801
D0804
D0807
16
775
16
775
16
775
Measurement are approximate.
/
/
/
725
725
725
/
775
175
935
/
775
175
935
/
775
17
935
Springs lengths vary slightly. Tack weld and then physically check
46
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
4
4
8
14
2
2
ROCKER ROLLER TANDEM ASSEMBLY

D0882-14
D0882-16
D0890-14
D0890-16
D0896-16
D0899A
5 LEAF TANDEM ROCK/ROLL 60 X 6.5mm 14 RIM 2000 Kg

D0885
5 Leaf rocker roller spring 60 X 6.5 2000KG
D0885A
5 Leaf rocker roller spring 60 X 6.5 FRONT
D0885B
5 Leaf rocker roller spring 60 X 6.5 REAR
D1602
Rocker hanger 3/4
2
D1712A
Rocker arm
2
D1107
Shackle Pin 4 x 5/8 greaseable
8
D1109
Shackle Pin 3-1/2 x 3/4
2
D1416
Spring Hanger 5/8
4
D2201
Roller
4
D0894
7 Leaf rocker roller spring 60 X 6.5 3000 KG
D0894B
7 Leaf rocker roller spring 60 X 6.5 FRONT
D0894C
7 Leaf rocker roller spring 60 X 6.5 REAR
D1712A
Rocker Arm 5/8 x 3/4 x 5/8
2
D1602
Rocker Hanger 3/4
2
D1107
Shackle Pin 4 x 5/8 greaseable
8
D1109
2
D1416
Spring Hanger 5/8
4
D2201
Roller
4
D0897
7 Leaf rocker roller spring 65 X 8.0
4
D1715
Rocker Arm 7/8 x 1 x 7/8
2
D1610
Rocker Hanger
2
D1117
8
D1120
Shackle Pin 4-1/2 x 1
2
D1417A
Spring Hanger 7/8
D2202
Roller
7/8
16
14
14
Centre Bolt
Offset Bolt
Offset Bolt
16
14
14
Centre Bolt
Off Set Bolt
Off Set Bolt
Centre Bolt

D0899B
8 Leaf rocker roller spring 65 X 8.0 6000 KG
16
Centre Bolt
ROCKER ROLLER TRIAXLE ASSEMBLY
5 LEAF TRIAXLE ROCK/ROLL 60 X 6.5mm

14 RIM 3000 Kg
16 RIM 3000 Kg
14 RIM 4500 Kg
16 RIM 4500 Kg
16 RIM 6000 Kg
Non ADR
Assembly
Wheels
Front / Rear to Center Hanger
Spring Bolt to Chassis
Axle to Axle
D0882-14
D0882-16
14
16
765
765
/
/
765
765
195
200
750
870
D0890-14
D0890-16
14
16
760
760
/
/
760
760
195
200
750
870
D0896-16
D0899A
16
810
/
810
225
940
16
825
/
825
225
940
Measurement are approximate. Springs lengths vary slightly. Tack weld and then physically check
SUSPENSION
D0883-14
D0883-16
D0892-14
D0892-16
D0899-16
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
47
HEAVY DUTY SPRING ASSEMBLIES
Refer to pages 50 & 51 for spring dimensions
SINGLE AXLE SLIPPER ASSEMBLY

H0101
H0104
H0106
H0108
2 Tonne SLIPPER ASSEMBLY

H0102 9 leaf 60 x 8mm spring
D1410 Spring hanger 3/4 hole
D1127 Shackle pin 4 x 3/4
2
4
4
3 Tonne SLIPPER ASSEMBLY

2
4
4
1.5 Tonne SLIPPER ASSEMBLY

H0107 7 leaf 60 x 6.5 mm spring
2
4
4
1.25 Tonne SLIPPER ASSEMBLY

H0109 5 leaf 60 x 6.5mm spring
2
4
4
SINGLE AXLE DOUBLE EYE ASSEMBLY

H0201
H0203
H0207
SUSPENSION
H0209
H0213
H0211
H0215
2 Tonne DOUBLE EYE

D1415 Cast hanger
D1115 Shackle pin 4-7/8 x 3/4
2
4
2
4
2
3 Tonne DOUBLE EYE

D1415 Cast hanger
2
4
2
4
2
4 Tonne DOUBLE EYE

H0208
14 leaf 65 x 8mm spring
D1415 Cast hanger
2
4
2
4
2
1.5 Tonne DOUBLE EYE - OFF ROAD

1.0 Tonne DOUBLE EYE - OFF ROAD
D1308 Shackle plates 5/8 hole
D1502 Perch block
2
2
2
4
2
6
Technical Note
No undercarriage assemblies in this
catalogue are ADR approved
(Axles, Springs, Brakes etc ).
All licensed trailers over 4500 Kg
require ADR approve undercarriages.
Unlicensed trailer do not require ADR
approves undercarriages.
7 Tonne DOUBLE EYE ASSEMBLY

13 leaf 75 x 11mm Non ADR
5 Tonne DOUBLE EYE ASSEMBLY
16 leaf 65 x 8mm
Non ADR
48
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
TANDEM AXLE DOUBLE EYE ASSEMBLY

Not ADR registered
H0305
H0307
H0308
4 Tonne TANDEM ROCKER ASSEMBLY (90 Kg)

6 Tonne TANDEM ROCKER ASSEMBLY (155 Kg)
4 Tonne TANDEM ROCKER ASSEMBLY 1200mm
H0305 uses H0306
H0307 uses H0204
H0308 uses H0202
D1410
D 1303
D 1605
D 1705
D1127
D1125

Spring hanger 3/4 hole

Shackle plate drilled, to 3/4
Rocker hanger 1-1/4
Cast rocker arm 4 tonne
Shackle pin 4 x 3/4
Shackle pin 4-5/8 x 1-1/4
NOT ADR APPROVED

AXLE to AXLE
4 suits H0305
4 suits H0307
4
8
2
2
12
2
940
FRONT
940
860
860
Drawing for H0305
1030
WALKING BEAM
Complete with 600mm center stub shaft, hubs & bearings

All units use bearing in central rocker box.
H0425
1.5 Tonne WALKING BEAM

1.5 tonne uses 39mm standard trailer hubs & stubs
890mm stub spacing. Suit all 13 & 14 rims
H0427

2.5 tonne uses 45mm slimline stubs & hubs.
1050mm stub spacing. Suit all patterns.
Stub
To Stub

3.0 Tonne uses 1500 Kg hubs & stubs (HB100A).
1050mm stub spacing. Suit HQ, Ford, L/Cruiser, Nissan
H0435

4.0 Tonne uses 50mm 2000 Kg hubs and stubs.
1050mm stub spacing. Suit Land Cruiser, Land Rover
SUSPENSION
H0430
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
49
TANDEM TWIN SLIPPER ASSEMBLY
A heavy duty load sharing suspension which enables the axles to be widely spread enabling large diameter wheels to be
used. Mainly used for agricultural purposes. Four to eight tonne units use the same hangers and 10 & 13 use the same
hangers, only the springs change.
Manufactured by MARTINS TRAILER PARTS.
H0505
H0507
H0509
H0511
H0513
H0515
4 Tonne
5 Tonne
6 Tonne
10 Tonne
8 Tonne
13 Tonne

240 Kg COMPLETE
245 Kg COMPLETE
250 Kg COMPLETE
320 Kg COMPLETE
275 Kg COMPLETE
400 Kg COMPLETE
H0505
H0507
H0509
H0513
H0506
H0508
H0510
H0514

4
4
4
4
D1718
D1615
D 1420
D2301
D2302
D1129
D1131
D2020
D2204
Rocker arm
Rocker hanger
Front spring hanger
Front radius rod
Rear radius rod
Shackle pin 5 x 7/8
Fish plate 92 x 82
Roller
and
H0511
H0515
uses
uses
uses
uses
2
2
2
2
2
2
4
4
4
10 Tonne TANDEM TWIN SLIPPER ASSEMBLY

13 Tonne TANDEM TWIN SLIPPER ASSEMBLY
H0511 uses H0512 8 leaf 75 x 16mm spring
H0515 uses H0516 9 leaf 75 x 16mm spring
4
4
and
2
2
2
2
2
2
4
4
4
D1719
D1616
D1420
D2301
D2302
D1129
D1131
D2020
D2204
Rocker arm
Rocker hanger
Front spring hanger
Front radius rod
Rear radius rod
Shackle pin 5 x 7/8
Fish plate 92 x 82
Roller
1420
FRONT
SUSPENSION
(4 tonne / 4 springs)

1435
555 CENTRES
690 C-C
1540 CRS
50
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
THE
GAFFA TRAILING ARM SUSPENSION
MANUFACTURED BY MARTINS TRAILER PARTS
Features
Progressive load rated springs
Removable stub axle unit
Easily wheel aligned : camber : toe in / out
Supplied on 1200 mm subframe, ready to go.
Incorporates rubber bump stop rated at 600 Kg
Features heavy duty shock absorbers
Trailing Arm eliminates transfer of axle shock
Special long life Kevlar / Graphite dry bushes
Special rated axle strap
Trailing Arm allows for good track clearance
Suits wide selection of hub types
All brake types can be supplied to suit.
Hubs and brakes are not included with the assembly to allow for manufacture a wide range of hub and brake types.
Hydraulic disc and drum, mechanical disc and drum and electric drum brakes can all be fitted to the GAFFA. The assembly
is supplied as a unit for use on a chassis width of 1200mm. The units may be divided by the purchaser for their particular
application. Extreme care should be taken when assembling onto the underside of your trailer. The unit itself must not be
part of the trailer subframe, rather, it should compliment it. Shackle bushes are 3/4 Kevlar / Graphite which run dry. The
shackle bolts are specially made to help ensure free movement of the arms. The stub axles are replaceable and need to
be checked for toe in out after trailer construction. GAFFAS can be supplied using low ride springs and shock absorbers to
keep the trailer low to the ground if required.
RIDE HEIGHTS
Centre of stub to chassis
Long spring
Short spring
270 or 330 mm
230 or 290 mm
COMPLETE ASSEMBLIES
GAFFA SUSPENSION
GAFFA SUSPENSION
GAFFA SUSPENSION
750 KG
1000 KG
1500 KG
I0820
I0855
I0855B
I0855C
I0855D
I0860
I0861
I0862
I0870
I0872
I0874
GAFFA SEMI BUILD

GAFFA STUB
: SLIM LINE
GAFFA STUB
: 1500 KG
GAFFA STUB
: PARALLEL TURNING
GAFFA STUB
: SPECIAL TURNING
GAFFA REBOUND STRAP
GAFFA REBOUND STRAP COVER
GAFFA BUMP STOP
GAFFA COIL SPRING 14MM 750 KG
I0876
I0878
I0879
I0885
COIL SPRING
14MM 750 KG : SHORT
COIL SPRING
15MM 1000 KG : SHORT
COIL SPRING
16MM 1500 KG : SHORT
SHOCK ABSORBER PER PAIR
SUSPENSION
I0801
I0803
I0805
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
51
GAFFA Air
TRAILING ARM SUSPENSION
The new GAFFA Air, airbag suspension, will give the softest ride to your RV. Utilizing many of the components of the sprung
Gaffa helps to keep the price to an affordable level. The Gaffa Air still uses removeable stub axles and can be fitted with all
types of hubs and brakes. The units comes fitted with stub axles, airbags and shock absorbers.
Air compressors and tanks are also available on request.
For the very best, ride on Gaffa Air
COMPLETE ASSEMBLIES
I0810
I0825
GAFFA Air
GAFFA SEMI BUILD
I0855
I0855B
I0855C
I0855D
I0860
I0861
I0862
I0885
I0890
GAFFA STUB
: SLIM LINE
GAFFA STUB
: 1500 KG
GAFFA STUB
: PARALLEL TURNING
GAFFA STUB
: SPECIAL TURNING
GAFFA REBOUND STRAP
GAFFA REBOUND STRAP COVER
GAFFA BUMP STOP
SHOCK ABSORBER PER PAIR
GAFFA FIRESTONE AIR BAG EACH
AIRBAG SUSPENSION
Featuring an airbag supported by a heavy trailing spring leaf that supports the AIRBAG and to which the axle u-bolts. This
combines the cost saving of a beam axle with the superior ride of the AIRBAG. The axle can be selected from our complete
range. To match the capacity required.
Assembly includes front hangers and shackle bolts, two sprung arms, two air bags and brackets, and U-bolts.
Axle is not included in the kit
The suspension uses a FIRESTONE bag
SPRUNG BEAM AXLE AIRBAG ASSEMBLY
I0906
I0908
I0910
I0912
I0912
D1410
D1127
SPRING for SPRUNG AIRBAG ASSEMBLY

LOWER AIRBAG BRACKET
TOP AIRBAG BRACKET
BOTTOM AIRBAG BRACKET
SPABILIZER
SPRING HANGER 3/4
SHACKLE PIN 4 X 3/4
SUSPENSION
I0900
52
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
SPRING DRAWINGS
PART No. - No. OF LEAVES PER SPRING, MATERIAL,
MAXIMUM LOAD ON TOTAL SPRING ASSEMBLY, SHIPPING WEIGHT PER SPRING
D0104
D0106
D0108
D0110
D0116
D0604
D0606
D0112
D0114
H0107
H0109
H0102
H0105
2 LEAF SLIPPER,
260 Kg SINGLE PAIR,
3 LEAF SLIPPER,
400 Kg SINGLE PAIR,
4 LEAF SLIPPER,
540 Kg SINGLE PAIR,
6 LEAF SLIPPER,
800 Kg SINGLE PAIR,
8 LEAF SLIPPER,
1 100 Kg SINGLE PAIR,
5 LEAF SLIPPER,
680 Kg SINGLE PAIR,
45 X 6mm,
3.1 Kg
45 X 6mm,
4.7 Kg
45 x 6mm,
5.3 Kg
45 X 6mm,
7.1 Kg
45 X 6mm,
8.9 Kg
45 X 6mm,
6.4 Kg
6 LEAF SLIPPER,
1500 Kg TANDEM SET,
8 LEAF SLIPPER,
2000 Kg TANDEM SET,
45 X 6mm,
7.4 Kg
45 X 6mm,
9.4 Kg
10 LEAF SLIPPER,
45 X 6mm,
1 300 Kg SINGLE PAIR, 12.4 Kg
6 LEAF SLIPPER,
45 X 6mm,
680 Kg SINGLE PAIR,
8.0 Kg
7 LEAF SLIPPER,
1500 Kg SINGLE PAIR,
5 LEAF SLIPPER,
60 X 6mm,
15 Kg
60 X 6mm,
10 Kg
9 LEAF SLIPPER,
13 LEAF SLIPPER,
60 X 8mm,
25.1 Kg
60 X 8mm,
34.8 Kg
SUSPENSION
D0102
PLEASE NOTE:
THESE DIAGRAMS RELATE TO SPRING LENGTH ONLY NOT THE NUMBER OF LEAVES.
D0102 HAS THE SAME LENGTH MEASUREMENT AS D0104 ETC.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
53
SPRING DRAWINGS

D0406
D0802
D0805
D0808
D0815
D0818
D0819
D0820
H0202
H0204
H0210
H0214
SUSPENSION
H0306
45 X 6mm,
5.5 Kg
45 X 6mm,
7.2 Kg
45 X 6mm,
10.2 Kg
5 LEAF DOUBLE EYE,

1500 Kg TANDEM SET,
7 LEAF DOUBLE EYE,
2000 Kg TANDEM SET,
9 LEAF DOUBLE EYE,
2500 Kg TANDEM SET,
11 LEAF DOUBLE EYE,
3000 Kg TANDEM SET,
45 X 6mm,
6.1 Kg
45 X 6mm,
8.2 Kg
45 X 6mm,
9.5 Kg
45 X 6mm,
12.0 Kg
5 LEAF DOUBLE EYE,

1500 Kg OFFSET SET,
7 LEAF DOUBLE EYE,
2000 Kg OFFSET SET,
9 LEAF DOUBLE EYE,
2500 Kg OFFSET SET,
45 X 6mm,
6.1 Kg
45 X 6mm,
8.1 Kg
45 X 6mm,
9.5 Kg
9 LEAF DOUBLE EYE,

2000 Kg per PAIR,
13 LEAF DOUBLE EYE,
3000 Kg per PAIR,
60 X 8mm,
25.3 Kg
60 X 8mm,
35.9 Kg
9 LEAF DOUBLE EYE,

1500 Kg per PAIR,
6 LEAF DOUBLE EYE,
1000 Kg per PAIR,
60 X 6m,
19 Kg
60 X 6mm,
14 Kg
8 LEAF DOUBLE EYE,

4000 Kg TANDEM SET,
60 X 8mm,
19.7 Kg
680
280
400
625 approx
115
D0404
4 LEAF DOUBLE EYE,

500 Kg SINGLE PAIR,
6 LEAF DOUBLE EYE,
760 Kg SINGLE PAIR,
9 LEAF DOUBLE EYE,
910
450
450
860 approx
145
D0402
PLEASE NOTE:
THESE DIAGRAMS RELATE TO SPRING LENGTH ONLY - NOT THE NUMBER OF LEAVES.
H0202 HAS THE SAME LENGTH MEASUREMENT AS H0204 ETC.
54
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
SPRING DRAWINGS

D0154
D0156
D0885-16
D0894-16
D0885A-14
D0894B-14
D0884B-14
D0894C-14
D0897
D0899B
SINGLE LEAF SLIPPER,

600 Kg SINGLE PAIR,
45 X 13mm,
3.0 Kg
45 X 16mm,
3.6 Kg
45 X 18mm,
4.2 Kg
5 LEAF ROCKER ROLLER

2000 Kg TANDEM
3000 Kg TANDEM
60 X 6.5

2000 Kg TANDEM
3000 Kg TANDEM
60 X 6.5
FRONT SPRING
60 X 6.5
FRONT SPRING

2000 Kg TANDEM
3000 Kg TANDEM
60 X 6.5
REAR SPRING
60 X 6.5
REAR SPRING

4000 Kg TANDEM
6000 Kg TANDEM
65 X 8mm
60 X 6.5
380
300
300
380
65 X 8mm
SUSPENSION
D0152
PLEASE NOTE:
THESE DIAGRAMS RELATE TO SPRING LENGTH ONLY - NOT THE NUMBER OF LEAVES.
D0885-14 HAS THE SAME LENGTH MEASUREMENT AS D0894-16 ETC.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
55
BUSHES
BRONZE BUSHES
D0901
D0902
D0908
D0909
D0911
D0912
BRONZE
BRONZE
BRONZE
BRONZE
BRONZE
BRONZE
I.D.
O.D.
LENGTH
3/4
9/16
5/8
7/8
3/4
1-1/4
X
X
X
X
X
X
1
3/4
7/8
1-1/8
1
1-1/2
X
X
X
X
X
X
1-3/4
1-3/4
2-1/4
2-1/2
2-1/2
2-1/2
1/2
12
X
X
7/8
24
X
X
1-3/8
35mm
1/2
9/16
1/2
9/16
5/8
X
X
X
X
X
3/4
3/4
7/8
7/8
7/8
X
X
X
X
X
1-3/4
1-3/4
1-3/4
1-3/4
2-1/2
1
X
1-1/4 X
1 3/4 X
1-1/2 X
60MM
60MM
7/8
X
1-1/8 X
45MM
65MM
POLY BUSHES
D0905
D0913
POLY
POLY
NYLON BUSHES
D0903
D0904
D0906
D0907
D0910
NYLON
NYLON
NYLON
NYLON
NYLON
KEVLON BUSHES
D0924
D0925
KEVLON
KEVLON
STEEL BUSHES
D0917
D0918
STEEL
STEEL
X
X
SUSPENSION
SHACKLE PINS & NUTS Length Diameter

D1001
D1101
D1103
D1107
D1109
D1115
D1117
D1119
D1121
D1123
D1125
D1127
D1129
D1131
D1133
D1135
D1138
D1151
D1153
Shackle Pin and Nut

Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
Shackle Pin and Nut
3-1/2
3-1/2
3-1/2
4
3-1/2
4-7/8
4-1/2
4-1/2
4-1/2
4-3/4
4-5/8
4
6-1/4
5
5-3/4
4
6/-1/4
100
100
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1/2
9/16
9/16
5/8
3/4
3/4
7/8
1
5/8
1-1/8
1-1/4
3/4
1-1/4
7/8
1-1/4
5/8
1-1/2
18mm
16mm
9/16
9/16
3/4
5/8
9/16
9/16
16mm
Hole : Punched
Hole : Punched
Hole : Drilled
Hole : Drilled
Hole : Plated
Hole : Plated
Hole : Drilled ALKO
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
Greaseable
ALKO
ALKO
SHACKLE PLATES
D1301
D1302
D1303
D1308
D1351
D1352
D1310
60mm Centre
74mm Centre
85mm Centre
85mm Centre
60mm Centre
74mm Centre
65mm Centre
30x8mm
30x8mm
40x10mm
40x10mm
30x8mm
30x8mm
35x8mm
56
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
SLOTTED PLATES - PLATED FOR VARIOUS U BOLTS

D1320
D1322
D1324
SLOTTED PLATE
(SUIT 35 - 55mm) 10mm HOLE
SLOTTED PLATE
SLOTTED PLATE
Special plates made to order
SPRING HANGERS
D1401
D1402
D1404
D1410
D1412
D1414
D1415
D1416
D1417
D1420
D1421
D1425
SPRING HANGER
SPRING HANGER
SPRING HANGER
SPRING HANGER
SPRING HANGER
SPRING HANGER
CAST HANGER
SPRING HANGER
SPRING HANGER
SPRING HANGER FRONT
SPRING HANGER REAR
SPRING HANGER
NO HOLE
HOLE
9/16 HOLE
HOLE
5/8 HOLE
9/16 HOLE
3/4 HOLE
5/8 HOLE
7/8 HOLE
TWIN SLIPPER
TWIN SLIPPER
16mm
45mm WIDE
45mm WIDE
45mm WIDE
60mm WIDE
60mm WIDE
60mm WIDE
60mm WIDE
68mm WIDE FOR ROCK/ROLL 3T
68mm WIDE FOR ROCK/ROLL 4T
D1401
D1410
D1415
ALKO Front & Back
D1402
PERCH BLOCKS
D1501
D1502
PERCH BLOCK : 45MM WIDE : Fitted with 3/4 X 9/16 nylon bush
PERCH BLOCK : 60MM WIDE : Fitted with 7/8 X 5/8 brass bush
D1501
ROCKER HANGERS
D1601
D1602
D1604
D1605
D1610
D1611
D1615
D1611
D1620
STEEL ROCKER HANGER - 9/16 HOLE

STEEL ROCKER HANGER - 1-1/4 HOLE
STEEL ROCKER HANGER - 7/8 FOR 3T ROCKER/ROLLIER
STEEL ROCKER HANGER - 1 FOR 4T ROCKER/ROLLER
STEEL ROCKER HANGER - TWIN SLIPPER 4,5,6 TONNE
STEEL ROCKER HANGER - TWIN SLIPPER 10 TONNE
STEEL ROCKER HANGER - 18mm ALKO
ROCKER ARMS
D1708
D1709
STEEL ROCKER ARM - FORKED: ALL 3/4 HOLES

STEEL ROCKER ARM - FORKED: 1 CENTRAL HOLE - BUSHED
STEEL ROCKER ARM - STRAIGHT: 1 BUSHED
STEEL ROCKER ARM - LONG VERSION OF D 1702B FOR 16 WHEEL
CAST
ROCKER ARM - SUIT 4 Tonne ROCKER ASSY
CAST
ROCKER ARM - STRAIGHT: ALL 3/4 HOLES WITH
nylon bushes to suit 9/16 pin
CAST
ROCKER ARM - FORKED BANANA - DRILLED ONLY
CAST
ROCKER ARM - BANANA TYPE - DRILLED ONLY
D1712A
D1715
D1720
CAST
CAST
STEEL
D1702C
D1705
SUSPENSION
D1701
D1702
D1702B
D1702C
D1705
D1706
D1706
ROCKER ARM - 3/4 HOLE 60mm WIDE FOR ROCK/ROLL 3T

ROCKER ARM - 1 HOLE 60mm WIDE FOR ROCK/ROLL 4T
ROCKER ARM - 18mm ALKO
D1709
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
57
ROCKER ARM SELECTION GUIDE

Part No. Material
Shape
D1701
D1702
D1702B
D1702C
D1705
D1706
D1708
D1709
D1710
D 1712A
D 1715
D1716
D 1718
D 1720
Forked
Forked
Straight
Straight
Triangular
Straight
Banana Forked
Banana Straight
Twin Slipper
Rocker Roller
Rocker Roller
Banana
Fabricated
Fabricated
Steel 45x45
Steel 45x45
Steel 45x45
Steel 45x45
Cast
Cast
Cast
Cast
Cast
Cast
Cast
Cast
Steel
Steelt
Spring
Width
45
45
45
45
60
45
45
45
45
60
60
60
75
60
Hole Sizes
End Center End
Hole Centres
Marking
9/16
9/16
9/16
9/16
3/4
9/16
9/16
9/16
9/16
5/8
7/8
9/16
9/16
3/4
3/4
3/4
1-1/4
9/16
3/4
3/4
3/4
3/4
1
9/16
9/16
9/16
9/16
9/16
3/4
9/16
9/16
9/16
9/16
5/8
7/8
9/16
90-100 mm
90-110 mm
78-75 mm
105-105 mm
127-127 mm
75-75 mm
80-115 mm
110-110 mm
Welded
Welded
16
18
16mm
100-100
A540
A676
A56511
Trigg A340
Carter
Industrial
Industrial
Twin Slipper
ALKO
FISH PLATES
Fish plate match with U-bolts to attach axle & spring.

D2001
D2002
D2003
D2004
D2006
D2007
D2008
D2009
D2010
D2012
D2013
D2014
D2015
Inside hole measurements

40mm X 45mm X 10mm - 12mm U BOLT
BLANK 10mm
BLANK 12mm
D2020
92mm X 82mm to suit twin slipper assembly
D2050
40mm X 45mm X 10mm - GALVANIZED
D2001
D2004
D2050
AXLE SADDLES
SUSPENSION
Saddles are used to locate springs on axle

D2101
D2102
D2103
D2103A
D2104
D2104B
FLAT AXLE PACKER

40mm SQUARE SADDLE
45mm SQUARE SADDLE
45mm SQUARE SADDLE - suit 60mm SPRINGS
50mm SQUARE SADDLE
50mm SQUARE SADDLE - suit 60mm SPRINGS
D2105
D2106
D2106A
D2107
D2108
D2108A
39mm ROUND SADDLE

63mm ROUND SADDLE
63mm ROUND SADDLE - WITH FLAT
65mm SQUARE SADDLE
75mm ROUND SADDLE
75mm ROUND SADDLE - WITH FLAT
58
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
ROUND U BOLTS
115mm
130mm
150mm
130mm
150mm
215mm
215mm
115mm
266mm
150mm
150mm
96mm
180mm
150mm
96mm
115mm
280mm
115mm
130mm
96mm
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SQUARE U BOLTS
D1901
D1902
D1903
D1904
D1906
D1907
D1908
D1910
D1911
D1912
D1913
D1915
D1916
D1917
D1920
D1921
D1925
D1926
D1929
D1930
D1931
D1932
D1933
D1934
D1951
D1952
D1953
D1954
D1956
D1958
D1962
D1964
D1965
D1968
D1969
115mm
130mm
150mm
130mm
150mm
165mm
150mm
150mm
180mm
100mm
75mm
130mm
190mm
100mm
150mm
130mm
90mm
150mm
75mm
130mm
220mm
100mm
100mm
100mm
115mm
130mm
150mm
130mm
150mm
150mm
100mm
100mm
130mm
150mm
150mm
39mm
39mm
39mm
50mm
50mm
63mm
63mm
39mm
76mm
50mm
63mm
39mm
57mm
45mm
39mm
45mm
75mm
39mm
39mm
39mm
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
12mm
12mm
12mm
12mm
12mm
16mm
16mm
l0mm
16mm
l6mm
12mm
10mm
16mm
16mm
12mm
12mm
3/4
12mm
12mm
12mm
HI TENSILE
HI TENSILE
HI TENSILE
GALVANISED
GALVANISED
GALVANISED
All measurements shown are inside measurements

X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
40mm
40mm
40mm
45mm
45mm
45mm
50mm
50mm
50mm
75mm
75mm
50mm
65mm
65mm
65mm
50mm
35mm
100mm
50mm
45mm
65mm
40mm
45mm
50mm
40mm
40mm
40mm
45mm
45mm
50mm
75mm
100mm
50mm
75mm
100mm
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
12mm
12mm
12mm
12mm
12mm
16mm
12mm
16mm
16mm
10mm
10mm
12mm
16mm
10rnm
12mm
10mm
10mm
10mm
10mm
16mm
16mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
PLATED
PLATED
PLATED
PLATED
PLATED
PLATED
PLATED
PLATED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
SUSPENSION
D1801
D1802
D1803
D1804
D1805
D1806
D1806A
D1808
D1809
D1810
D1811
D1812
D1813
D1814
D1815
D1816
D1819
D1851
D1852
D1865
All measurements shown are inside measurements
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
59
U BOLT KITS
Kit includes 4 x U Bolts, 2 x Fish Plates & 2 x Axle Saddles. Enough for ONE (1) axle
D1755
D1756
D1757
D1759
U-BOLT SET D1801+D2001+D2105

U-BOLT SET D1802+D2001+D2105
U-BOLT SET D1803+D2001+D2105
U-BOLT SET D1804+D2003+D2103
AXLE
AXLE
AXLE
AXLE
D1760
D1761
U-BOLT SET D1865+D2050+D2105

U-BOLT SET D1851+D2050+D2105
AXLE
AXLE
D1770
D1771
D1772
D1774
D1775
D1779
D1780
D1783
D1784
U-BOLT SET D1901+D2001+D2102

U-BOLT SET D1902+D2001+D2102
U-BOLT SET D1903+D2001+D2102
U-BOLT SET D1904+D2002+D2103
U-BOLT SET D1906+D2002+D2103
U-BOLT SET D1910+D2006+D2104B
U-BOLT SET D1911+D2006+D2104B
U-BOLT SET D1930+D2004+D2103A
U-BOLT SET D1907+D2004+D2103A
AXLE
AXLE
AXLE
AXLE
AXLE
AXLE
AXLE
AXLE
AXLE
D1790
D1791
D1792
D1793
U-BOLT SET D1932+D2050+D2102

U-BOLT SET D1951+D2050+D2102
U-BOLT SET D1933+D2050+D2103
U-BOLT SET D1954+D2050+D2103
AXLE
AXLE
AXLE
AXLE
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
GALVANISED
U BOLT SELECTION GUIDE

39mm RND
45mm WIDE
2 leaf
3 leaf
4 leaf
5 leaf
6 leaf
7 leaf
8 leaf
9 leaf
10 leaf
LEAF
D1815
D1815
D1801
D1801
D1801
D1802
D1802
60mm WIDE
SPRINGS
40mm SQ
45mm SQU
50mm RND
50mm SQ
D1932
D1901
D1901
D1901
D1901
D1902
D1902
D1903
D1903
D1904
D1904
D1904
D1904
D1906
D1906
D1804
D1804
D1804
D1804
D1805
D1805
D1915
D1915
D1908
D1908
D1930
D1930
D1907
D1810
D1810
D1810
D1910
D1910
D1911
D1807
D1807
D1807
D1909
D1909
D1911
D1806
D1806A
D1916
8mm LEAF
9 leaf
13 leaf
SUSPENSION
65mm SQ
LEAF
6 leaf
8 leaf
9 leaf
Leaf thickness
65mm RND
ROCKER ROLLER SPRINGS
ROLLER
ASSEMBLY
5 leaf (2 Tonne)
7 leaf (3 Tonne)
7 leaf (4 Tonne)
D1901
D1930
D1907
D1810
D1810
D1910
D1911
D1811
D1807
D1911
SINGLE LEAF SPRINGS (Parabolic)

600 Kg
1000Kg
1400 Kg
D1815
D1815
D1815
D1932
D1932
D1932
D1933
D1933
60
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
PEREI LIGHTS
: Bayonet
ADR APPROVED, NUMBER PLATE LIGHTS
COMBINATION TAIL LIGHTS
ADR APPROVED
E0106B
PEREI NUMBER PLATE LIGHT

SMALL (90 X 50 X 40mm: Festoon)
E0120
TRUCK COMBINATION LIGHT

(280 X 100 X 45mm :Bayonet)
E0106A
PEREI NUMBER PLATE LIGHT

LONG (110 X 45 X 40mm: Twin Bayonet )
E0130
PEREI SQUARE COMBINATION

(100 X 100 X 40mm: Bayonet globe)
E0143
PEREI OBLONG COMBINATION

(165 X 80 X 55mm: Bayonet globe)
E0147
RECTANGULAR COMBINATION
WITH REVERSE
RECTANGULAR COMBINATION
(330 X 80 X 55mm : Bayonet globe)
CLEARANCE LAMPS
E0103R
E0103A
E0103C
E0108
PEREI RED AND REFLECTOR

PEREI AMBER AND REFLECTOR
PEREI WHITE AND REFLECTOR
90 X 50 X 25mm: Festoon globe
CLEARANCE LIGHT
RUBBER MOUNTED
95 X 80 X 85mm: ADR
E0147A
E0109
E0109B
CLEARANCE LIGHT
FLUSH MOUNTED
140 X 70 X 40mm : Festoon globe
CLEARANCE LIGHT
& STRONG PLASTIC SURROUND
E0135
CLEARANCE RED/& AMBER

CLEARANCE RED/& WHITE
90 X 50 X 40mm : Festoon globe
LIGHTS
E0110
E0110A
ARK SQUARE COMBINATION

(95 X 95 X 35mm : Bayonet globe
Clip on lenses)
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
61
LED LIGHTS
INTERIOR LIGHTS
E0605
ROUND 80mm 12 LED PUSH BUTTON
E0515
E0516
E0517
E0518
WHITE STRIP LIGHT 100 x 25 x 10

INDIVIDUAL LIGHT : MULTI VOLTED

EL150A
EL150R
EL150W
LIGHT:LED-AMBER
80x80x30 mm
LIGHT:LED- RED
80x80x30 mm
LIGHT:LED- WHITE
80x80x30 mm
36 LED EACH Multivolt 12-24V
Clip in lenses 400mm of hard wired cable
CLEARANCE LIGHT
EL200A
EL200R
EL200W
LED CLEARANCE AMBER

LED CLEARANCE RED
LED CLEARANCE WHITE
4 LED
4 LED
4 LED
EL210
LED CLEARANCE RED /AMBER 4 LED

4 LED 35 X 58 X 19mm
EL212
LED CLEARANCE AMBER

Boxed lots of 10
EL220
CLEARANCE LIGHT FLUSH MOUNTED

140 X 70 X 40mm
LED LIGHTS
NUMBER PLATE LIGHT
EL100
LED NUMBER PLATE PEREI

LED NUMBER PLATE TO EL303
LED NUMBER PLATE TO EL304
2 LED
LIGHTS
EL105
EL110
EL115
LED NUMBER PLATE

4 LED 76 X 41 X 30mm
Multivolt 12-24
62
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
12 VOLT COMBINATION LAMPS
EL302
EL303
EL303N
EL304
EL304
EL305
EL310
EL312
Rectangular 14 LED
Stop/Tail/Indicator
Includes reflector.
Size 150 x 80 x 22mm.
Fully submersible.
Stainless steel bolts
Square 14 LED
Stop/Tail/Indicator
Includes reflector.
Size 150 x 80 x 22mm.
Fully submersible.
Stainless steel bolts
Rectangular 8 LED
Rectangular 8 LED
Stop/Tail/Indicator
Includes reflector
Size 150x80x22.
Fully submersible
Square 8 LED
Square 8 LED
Stop/Tail/Indicator
Includes reflector
Size 150x80x22.
Fully submersible.
Stop / Tail / Indicator

EL320
LIGHT :LED COMBO

80x80mm lense
400mm of hard wired cable
Multivolt 12-24V
OD 100x100x30mm
EL322
LIGHT :LED COMBO

100 x 100mm lense
Multivolt 12-24V
OD 120 x 120 x 30mm
EL330-LH LIGHT :PEREI COMBO

Multivolt
OD 100x100x30mm
Includes reflector
EL330-RH LIGHT :PEREI COMBO
OD 100x100x30mm
Included number plate light
Includes reflector
Multivolt
Trailer light kit

L/H & R/H lights
Stop/Tail/Indicator
Number Plate
200x113x30mm
Boat Trailer Kit

Trailer light kit
L/H & R/H lights
Stop/Tail/Indicator
Number Plate
200x113x30mm
EL340
LIGHT :LED COMBO STOP / TAIL

200 x 50 x 28mm 400mm of cable
EL342
LIGHT COMBO STOP/TAIL/INDICATOR

200 x 50 x 28mm 400mm of cable
LIGHTS
EL300
COMBINATION LIGHT : MULTI VOLTED
Same as EL310
Boat Trailer Kit with 8M of cable prewired in.
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
63
CLUSTER LIGHT
Stop / Tail / Indicator
EL400
EL410
EL412
EL420
LED 3X 80mm Cluster RED/RED/AMBER

Clip in lenses. 400mm of hard
wired cable36 415 x 145 x 32mm
LED 3X80mm Cluster RED/AMBER/WHITE

wired cable36 350x120x31mm
E0162
E0162A
E0162B
ROUND - 60mm RED

ROUND - 60mm AMBER
ROUND - 60mm WHITE
E0163
E0163A
E0163B
ROUND - 80mm RED

ROUND - 80mm AMBER
ROUND - 80mm WHITE
E0164
E0164A
E0164B
OBLONG STICK ON - (70 X 20mm) RED

OBLONG STICK ON - (70 X 20mm) AMBER
OBLONG STICK ON - (70 X 20mm) WHITE
E0165A
E0165B
OBLONG STICK ON - (70 X 40mm) AMBER

OBLONG STICK ON - (70 X 40mm) WHITE
E0168
E0168A
E0168B
SCREW ON - (70 X 40mm) - RED

SCREW ON - (70 X 40mm) - AMBER
SCREW ON - (70 X 40mm) - WHITE
E0169
E0169A
E0169B
SCREW ON - (100 x 50mm) - RED

SCREW ON - (100 x 50mm) - AMBER
SCREW ON - (100 x 50mm) - WHITE
LED 3X100mm Cluster RED/RED/AMBER

Clip in lenses. 400mm of hard wired cable
350X120X31mm
LED 3X125mm Cluster RED/RED/AMBER

wired cable36 415 x 145 x 32mm
LIGHTS
EL412
LED 2X 80mm Cluster RED/AMBER

Clip in lenses. 190x100x28mm
REFLECTORS PERIE Comply to ADR
64
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
LIGHTING KIT
includes combination lights, 7 pin plug, all reflectors & cable
PEREI BAYONET GLOBE KIT

E0080
E0082
E0084
E0086
E0088
LIGHT SET : TRAILER

LIGHT SET : TRAILER
LIGHT SET : TRAILER
LIGHT SET : TRAILER
LIGHT SET : TRAILER
2.1
2.1
2.1
2.1 plus
2.1 plus
X 4.0M
X 6.0M
X 10M
X 4.0M
X 6.0M
MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
2.1
2.1
2.1
2.1 plus
2.1 plus
X 4.0M
X 6.0M
X 10M
X 4.0M
X 6.0M
MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
L.E.D. LIGHT KIT

EL090
EL092
EL094
EL096
EL098
LIGHT SET : TRAILER

LIGHT SET : TRAILER
LIGHT SET : TRAILER
LIGHT SET : TRAILER
LIGHT SET : TRAILER
LIGHT BAR FOR BOAT TRAILER

E0401
E0401D
E0401E
LIGHT BAR - BARE 1500MM LONG

LIGHT BAR COMPLETE - 1520mm LONG
Metal bar fitted with non-submersible lights, reflectors, 8 M of cable & plug
LIGHT BAR COMPLETE - 1520mm LONG
Metal bar fitted with LED submersible lights, reflectors, 8 M of cable & plug
HORSE FLOAT SPRINGS

E0701
E0703
30 FLAT SPRING
30 HELPER LEAF
E0715
E0716
30 HORSE FLOAT SPRING ASSEMBLY COMPLETE

30 HORSE FLOAT SPRING ASSEMBLY & HELPER COMPLETE
Set includes springs, mount brackets and bolts.
E0707
E0711
E0712
COIL SPRING FOR TAILGATE 1/2 DIA. STEEL

Arm length 560mm overall. 9 coils, 52mm center, 150mm leg.
Center shaft diameter should be 12mm less than the spring inner diameter
E0605
TRAILER COMPLIANCE PLATE

Information required to stamp on compliance plate
- TRAILER MAKER
- DATE OF MANUFACTURE
- VIN NUMBER
- AGGREGATE TRAILER MASS
- TYRE SIZE
- RIM SIZE
- TYPE OF TRAILER
E0607
COMPLIANCE PLATE PRINTED
LIGHTS
COMPLIANCE PLATE
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
65
R CLIPS
E0801
E0801A
E0801B
E0801C
E0801D
BONNET LATCH : RUBBER
E0908
TOGGLE KIT - SHORT
E0909
TOGGLE KIT - LONG

Kit includes threaded toggle, nut,
strike plate and rubber dampener.
R CLIP 4 X 90mm
R CLIP 3 X 65mm
R CLIP 5 X 110mm
R CLIP 6 X 115mm
R CLIP 7 X 150mm
LYNCH PIN
E0802
E0802B
E0802C
E0802D
E0802E
E0825
LYNCH PIN 6mm

LYNCH PIN 8mm
LYNCH PIN l lmm
LYNCH PIN 4.5mm
LYNCH PIN 11mm LONG
SPRUNG CATCHES
E0803
E0803A
STANDARD SPRUNG CATCH :12MM

Base 60 x 30 mm. 115mm Over All
CAM LATCHES
E0914
E0915
E0916
CAM LATCH : ADJUSTABLE 90x30mm

CAM LATCH : ADJUSTABLE 1 15x32mm
CAM LATCH : ADJUSTABLE 160x45mm
E0917
CAM LATCH - LOCKABLE
E0918
CAM LATCH - HEAVY , LOCKABLE
E0919
CAM LATCH - HIGH SECURITY
E0924
CAM ROOF CLAMP FOR CAMPER
HEAVY SPRUNG CATCH 16 mm

Base 95 x 32 x 8mm. Overall 180mm
CATCHES & LATCHES
TOGGLES
E0812 TOGGLE LOCK - WELDABLE 20mm
E0813 TOGGLE LOCKTHREADED
66
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
E0820
E0822
GAS STRUTS
PLATED BOLTABLE HINGE - FEMALE
PLATED BOLTABLE HINGE - MALE
Zinc plated & drilled
E0904
TAILGATE HINGE SET : male & female

(E0906 &E0907)
E0905
TAILGATE FEMALE : LONG SUIT E0904

300mm long Black metal finish
E0906
TAILGATE FEMALE SHORT SUIT E0904

100mm long Black metal finish
E0907
TAILGATE GUDGEON - MALE

(LEFT AND RIGHT)
E0935
E0936
E0937
HINGE 180 deg

HINGE 270 deg
HINGE 270 deg
E0960
PIANO HINGE : 38 x 1.6 x 1250mm
E0962
BOLT ON
BOLT ON
WELD ON
E18=OD
E18315100N
315=Extended length
100N= Force
Part No
Part No
E18-316-100N
E18-316-150N
E18-316-200N
E18-330-370N
E18-340-150N
E18-340-380N
E18-375-480N
E18-375-530N
E18-405-280N
E18-405-365N
E18-405-390N
E18-430-100N
E18-430-120N
E18-430-150N
E18-430-315N
E18-450-140N
E18-475-415N
E18-500-200N
E18-500-240N
E18-500-360N
E18-500-440N
E18-500-450N
E18-500-480N
E18-500-590N
E18-500-650N
E18-525-200N
E18-525-300N
E18-525-400N
E18-525-460N
E18-525-520N
E18-550-370N
E18-550-500N
E18-550-590N
E18-575-270N
E18-575-300N
E18-575-450N
E18-575-500N
E18-575-520N
E18-585-200N
E18-585-300N
E18-585-340N
E18-585-495N
E18-595-710N
E18-630-270N
E18-630-380N
E18-630-410N
E18-630-450N
E18-670-290N
E18-670-670N
E18-700-270N
E18-700-380N
E18-700-420N
E18-750-210N
E18-750-270N
E18-750-300N
E18-750-400N
E18-750-700N
E18-750-730N
E18-750-850N
E18-830-850N
E22-315-100N
E22-330-630N
E22-525-400N
E22-585-370N
E22-585-470N
E22-585-495N
E22-595-710N
E22-630-350N
E22-700-350N
E22-700-570N
E22-700-650N
E22-700-680N
E22-700-820N
E22-750-700N
E22-750-850N
E22-795-500N
E22-795-600N
E22-795-700N
E22-795-780N
E22-795-800N
E22-795-900N
E22-830-350N
E27-830-700N
E27-830-900N
CATCHES & LATCHES
HINGES
UTILITY SPRUNG CORNER FASTENER
E0745
LID STAY - MECHANICAL SUPPORT

220 mm 420 mm extended
Hole center 30 mm
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
67
HANDLES
E0920
E0930
CATCHES & LATCHES
E0950
E0950B
CORNER FASTENERS
DOOR RETAINER
DOUBLE DOOR LOCKING DEVICE
E0901
E0902
E0903
UTILITY FASTENER : HANDLE

UTILITY FASTENER : TONGUE BENT
UTILITY FASTENER : TONGUE FLAT
E0910
E0911
E0912
TRUCK FASTENER : HANDLE

TRUCK FASTENER : TONGUE FLAT
TRUCK FASTENER : TONGUE :BENT
E0958
ROD LOCK - 2 POINT DOOR LOCK
E0966
NYLON KNOB & SPINDLE

(HEAVY DUTY : JOCKEY WHEEL)
E0940
E0940A
TURN BUCKLE - EYE TO EYE 10mm

TURN BUCKLE - EYE TO HOOK 10mm
E0941
LASHING HOOKS
E0945
LASHING RING
90mm square body
Eye 55 x 35mm sprung flat
HANDLE : COMPRESSION 100x50mm

HANDLE : COMPRESSION 80x40mm
E0951
E0951A
E0951B
HANDLE : RECESSED LOCKABLE T

ROD TO MAKE 3 POINT LOCKING
ROD GUIDE
E0955
E0957
DOOR HANDLE T TYPE LOCKABLE

DOOR INSIDE LATCH
68
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
WATER TANKS
E0720
SMALL SCUPPER
(ALLOY SPRUNG AIR VENT)
(Opening size 100 x 60mm)
E0721
LARGE SCUPPER
(Opening size 190 x 100mm)
E0722
E0724
MULLER VENT : PLASTIC

Drawing air out by venturi effect
O.D. 280 x 185mm
SPINNING VENT : PLASTIC

Drawing air out by venturi effect
O.D. 230mm : Opening 120mm
E0723
ROSE VENT : ALUMINIUM

150mm diameter
E0723A
ROSE VENT : PLASTIC

150mm diameter
E1102
WATER TANK 58 LITRE

800 X 460 X 180MM
E1104
WATER TANK 80 LITRE

1160 X 460 X 180MM
E1106
WATER TANK 57 LITRE

SQUARE
750 X 350 X 240MM
E1200
E1224
WATER INLET - FLAP TYPE

WATER INLET - LOCKABLE
E1230
RV WATER LEVEL INDICATOR

gives an accurate reading of the water
level, whose tanks have a maxi depth of
280mm and a max wall thickness of 10mm
E1300
WATER PUMP
Easy duel action
TROJAN
VENTS & WATER TANKS
AIR VENTS
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
69
PULLING WINCHES
Pulling winches are rated for a rolling load. Securely bolt base using all bolt holes. Twisting of the winch body when the
winch is under load places extreme pressure on the winch gears. All winches must be lubricated on all gears. Winches are
not for the movement of people or a load securing device for boats on trailers.
AL-KO International
Model
Brand
Ratio Capacity
Kg
Cable
Size
Body
Size
Handle
F0130
ALKO
1:1
6Mx4mm
150x100
Fixed
250
AL-KO PREMIUM RANGE
ALKO Premium boat winches have galvanised body and stainless steel shafts.
F0142
F0143
F0144
F0145
ALKO
ALKO
ALKO
ALKO
3:1:1
5:1:1
10:5:1
15:5:1
500
700
1000
1200
6Mx4mm
6Mx5mm
7.5Mx6mm
7.5Mx6mm
150x100
150x100
150x100
150x100
Removable
Removable
Removable
Removable
500
700
1000
1200
4Mx50mm
6Mx50mm
7Mx50mm
7Mx50mm
150x100
150x100
150x100
150x100
Removable
Removable
Removable
Removable
AL-KO PREMIUM RANGE

F0146
F0147
F0148
F0149
ALKO
ALKO
ALKO
ALKO
3:1:1
5:1:1
10:5:1
15:5:1
ATLANTIC
Model
Brand
Ratio Capacity
Kg
Cable
Size
Body
Size
Handle
F0170
F0171
F0172
F0173
F0174
F0175
ATLANTIC
ATLANTIC
ATLANTIC
ATLANTIC
ATLANTIC
ATLANTIC
3:1:1
3:1
5:1
5:1
10:5:1
15:5:1
500
700
1000
1200
1200
1200
6Mx4mm
6Mx5mm
7.5Mx6mm
7.5Mx6mm
7.5Mx6mm
7.5Mx6mm
150x100
150x100
150x100
150x100
150x100
150x100
Removable
Removable
Removable
Removable
Removable
Removable
3:1:1
5:1:1
10:5:1
15:5:1
500
700
1000
1200
4Mx50mm
6Mx50mm
7Mx50mm
7Mx50mm
150x100
150x100
150x100
150x100
Removable
Removable
Removable
Removable
F0171
F0175
WEBBED WINCHES
F0176
F0177
F0178
F0179
ATLANTIC
ATLANTIC
ATLANTIC
ATLANTIC
JARRETT
WINCHES
All winches have One Way pawls

Model
Brand
Ratio Capacity
Kg
Cable
Size
Body
Size
Handle
F0103
F0109
F0110
F0113
Jarrett
Jarrett
Jarrett
Jarrett
3:1
5:1
5:1:1
10:5:1
6Mx4mm
6Mx4mm
6Mx5mm
7.5Mx6m
124x110
124x110
124x110
124x110
Fixed
Fixed
Loose
Loose
300
500
500
1000
70
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
BRAKE WINCHES
Brake winches are rated for a vertical load. DO NOT use for lifting humans.
Securely bolt base using all bolt holes. Twisting of the winch body when the winch is under load places extreme pressure
on the winch gears. Please note all winches must be lubricated regularly on all gears.
.
Do not use a winch to secure a load while it is being transported. The ratchet pawl will not take the strain.
JARRETT
Model
Brand
Ratio Cap.
Kg
Cable
M
Brake
Type
Body
mm
Handle
F0122
F0122A
F0122B
Jarrett
Jarrett
Jarrett
5:1
300
3:1
200
10 : 1 500
7.5Mx5mm
7.5Mx5mm
7.5Mx5mm
Self Act.
Self Act.
Self Act.
140 x 143
140 x 143
140 x 143
Bolt On
Bolt On
Bolt On
F0123
F0124
Jarrett
Jarrett
8:1
15:1
630 No Cable
1200 No Cable
Self Act.
Self Act.
234x230
234x230
Bolt On
Bolt On
Self Act.
Self Act.
140 x 143
140 x 143
Bolt On
Bolt On
Self Act.
Self Act.
234x230
234x230
Bolt On
Bolt On
ATLANTIC
F0160
F0160A
Atlantic
Atlantic
5:1
3:1
300
200
7.5Mx5mm
7.5Mx5mm
F0162
F0163
Atlantic
Atlantic
8:1
15:1
630 No Cable
1200 No Cable
WINCHES
Be conservative when selecting your winch

Caution: Liberally lubricate all moving parts of winches
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
71
WINCH POST & PLATE

F0180
F0184
F0192
WINCH POST
SMALL
575mm
WINCH POST
LARGE
750mm
WINCH PLATE
MEDIUM
Suits most winch hole patterns
F0252
WEB & SNAP HOOK 7.5M x 50mm
F0207
F0209
F0215
HOOK : STAINLESS STEEL S

HOOK : FIGURE 8 SNAP HOOK
HOOK : SNAP HOOK MARINE
F0204
F0205
F0205A
F0206A
HANDLE : CAST WINCH

HANDLE : JARRETT WINCH (HEX)
HANDLE : JARRETT WORM DRIVE
HANDLE : ALKO
F0260
F0261
F0265
PULLEY BLOCK & HOOK 50mm

PULLEY BLOCK : Steel 50mm
PULLEY BLOCK : Steel 90mm
ALKO PREMIUM WINCH SPARES
WINCH CABLES & ACCESSORIES

F0201A
F0202
F0203
F0235
F0236
6.0M x 4mm CABLE & SHOOK

7.5M x 5mm CABLE & SNAP HOOK
15M x 5mm CABLE & SNAP HOOK
7.5M x 6mmCABLE & SNAP HOOK
15M x 6mm CABLE & SNAP HOOK
F0230
F0232
F0234
6M x 5mm SUPER ROPE

7M x 7mm SUPER ROPE
15Mx 7mm SUPER ROPE
Low stretch UV resistant Polyethylene
WINCHES
Eziguide is designed for easy fitting on a wide variety

of trailers. It comprises two separate spring-loaded
15roller arms which bolt to the rear of the trailer,
either side of the existing keel roller.
Sizing related to the spring material diameter.
FP-001
FP-002
FP-003
FP-004
FP-005
FP-006
FP-010
FP-011
FP-020
FP-021
FP-022
WINCH PAWL 1:3:5

WINCH PAWL 1:5:10
WINCH PAWL SPRING 1:15
WINCH PAWL SPRING 1:3:5
WINCH PAWL SPRING 1:5:10
WINCH PAWL SPRING 1:15
WINCH BUSH 16mm
WINCH BUSH 20mm
WINCH GEAR 1:3:5
WINCH GEAR 10:1
WINCH GEAR 15:1
F0270
CAST WINCH PAWL ASSY
MODEL
F1050
F1052
F1054
F1056
EG8
EG10
EG11
EG13
POWER
SAILBOATS
3.6 to 4.2m
4.2 to 4.8m
4.8 to 6.0m
6.0 to 8.5m
4.2 to 4.8m
4.8 to 6.0m
6.0 to 8.5m
72
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
RED POLY ROLLERS
Polyurethane rollers are an excellent general purpose roller with particular application to fiberglass boats. The roller have a
little give to suit the fibreglass while return to shape well.
CONCAVE ROLLER
F0402
F0404
A
175
195
B
80
67
C
55
45
PIN
19mm
19mm
B
175
150
48
C
60
35
30
D
120
60
50
PIN
22mm
16mm
16mm
C
50
50
50
50
45
50
50
D
75
75
75
75
62
80
750
PIN
16mm
19mm
19mm
19mm
16mm
25mm
19mm
B
50
70
50
C
85
110
80
PIN
12mm
12mm
12mm
B
85
PIN
25mm
B
75
75
PIN
16mm (TAPERED)
16mm (SQUARE)
STEPPED ROLLER
F0440
F0442
F0444
A
65
60
10
PARALLEL ROLLER
F0420
F0421
F0422
F0423
F0424
F0425
A
150
150
200
200
300
300
B
75
50
75
50
75
50
PIN
19mm
19mm
19mm
19mm
19mm
19mm
COTTON REEL ROLLER

F0406
F0408
F0410
F0412
F0414
F0416
F0418
A
85
110
160
195
100
300
120
B
40
55
105
135
53
160
55
V BLOCK - BOW STOP

F0452
F0454
F0456
A
90
115
50
WOBBLE ROLLER
F0450
A
105
F0460
F0462
A
62
63
ROLLERS
BUNK ROLLER
SELF-CENTERING ROLLER
F0430
F0434
A
170
240
B
70
80
PIN
19mm
19mm
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
73
BLACK RUBBER ROLLERS
Rubber rollers are an excellent cheap form of roller which have been used on boat trailer for years.
They are the traditional roller. Suitable for all types of boats.
CONCAVE ROLLER
F0330
F0332
A
300
200
B
69
C
80
45
PIN
25mm
21mm
B
160
C
35
PIN
17mm
STEPPED ROLLER
F0316
A
63
PARALLEL ROLLER
F0310
F0310A
F0311
A
150
200
300
B
60
60
60
PIN
18mm
22mm
24mm
COTTON REEL ROLLER

F0302B
F0304
F0306
F0314
F0327
F0328
F0331
A
110
75
178
152
104
145
145
B
55
62
65
52
58
40
60
C
50
35
75
100
45
40
70
D
75
B
50
C
80
PIN
16mm
B
100
75
80
PIN
25mm
25mm (RIPPLED)
26mm (BLUE POLY)
B
75
75
PIN
16mm (TAPERED)
16mm (SQUARE)
127
102
61
90
120
PIN
16mm
17mm
16mm
19mm
17mm
17mm
16mm
V BLOCK - BOW STOP

F0510
A
100
WOBBLE ROLLER
F0321
F0321B
F0321C
A
100
100
120
ROLLERS
BUNK ROLLER
F0308
F0309
A
62
62
74
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
BLUE MAGNA ROLLERS
For ALUMINIUM, Blue Magna rollers are excellent, hard wearing rollers for boats and for rolling metal across.
COTTON REEL ROLLER

F0353
F035
F0355
F0356
A
122
4
115
160
B
52
154
55
C
50
40
56
D
75
50
75
70
PIN
17mm
90
17mm
17mm
17mm
B
60
C
40
D
60
55
PIN
17mm
17mm
B
45
C
70
PIN
22mm
STEPPED ROLLER
F0360
F0362
A
160
100
CONCAVE ROLLER
F0370
A
200
PARALLEL ROLLER
F0375
A
200
B
60
PIN
17mm
SIDE STRIPPING - FOR BOAT TRAILERS

F0508
45mm THERMOPLASTIC PER METRE

Glue on plastic stripping. 45 X 8mm
F0514
MAGNA STRIPPING: BLUE 55 X 18mm

Extremely tough and slippery
slide for aluminium boats.
55
F0516
MAGNA PLANK: BLUE 70 X 40mm

Tough and slippery side rail.
No need for metal supports.
Sold by the meter from 3 M lengths
F0517
MAGNA PLANK: KIT

lm of Magna Plank complete with galvanised
brackets to bolt to existing supports.
ROLLERS
18
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
75
ROLLER BRACKETS
(GALVANIZED)
F0600
F0601
F0601A
F0602
F0603
F0603A
ROLLER BRACKET
ROLLER BRACKET
ROLLER BRACKET
ROLLER BRACKET
ROLLER BRACKET
ROLLER BRACKET
85
115
130
160
210
320
X
X
X
X
X
X
56 X
65 X
65 X
66 X
65 X
90 X
17mm
17mm
17mm
17mm
17mm
17mm
ROLLER PINS
F0604
F0605
F0606
F0607
F0608
ROLLER PIN 165 X 16mm

ZINC PLATED
ZINC PLATED
ZINC PLATED
ZINC PLATED
ZINC PLATED
F0604A
F0605A
F0606A
F0607A

ZINC PLATED
ZINC PLATED
ZINC PLATED
ZINC PLATED
F0604S
F0605S
F0608S
F0607S

STAINLESS
STAINLESS
STAINLESS
STAINLESS
F0660
F0662
F0664
F0666
ROLLER BRACKET
ROLLER BRACKET
ROLLER BRACKET
ROLLER BRACKET
SINGLE
TWIN LEG
TWIN LEG
TWIN LEG
F0670
LOW WATER ROCKER SPINDLE
200mm
F0672
F0674
LOW WATER ROCKER BRACKET 200mm

LOW WATER ROCKER BRACKET 300mm
100mm
150mm
200mm
300mm
ADJUSTABLE SUPPORTS
ROLLERS
Threaded adjusting bolts, nuts & washers - Galvanised

F0802
F0803
305 X 20mm INCLUDING NUTS AND WASHERS

356 X 20mm INCLUDING NUTS AND WASHERS
76
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
BUNK ROLLER BRACKETS

F0808
F0915
F0810
BUNK ROLLER SUPPORT - 20mm THREAD, NUTS & WASHERS

BUNK ROLLER HEAD - GALVANISED
BUNK ROLLER ASSEMBLY - 20mm HEAD AND SUPPORT ONLY
F0814
F0816
BUNK ROLLER KIT WITH BLACK ROLLERS

BUNK ROLLER KIT WITH RED ROLLERS
20mm THREAD
20mm THREAD
WOBBLE ROLLER BRACKETS

F0812
F0813
WOBBLE ROLLER TANDEM ASSY (NO ROLLERS)

WOBBLE ROLLER QUAD ASSY (NO ROLLER)
F0824
F0828
F0828
WOBBLE ROLLER KIT : RED POLY ROLLER

WOBBLE ROLLER KIT : BLUE POLY ROLLER
WOBBLE ROLLER KIT : BLACK RUBBER ROLLER
F0921
F0924
F0926
F0922
WOBBLE ROLLER TANDEM HEAD: NO ROLLERS

WOBBLE ROLLER QUAD HEAD
WOBBLE ROLLER SINGLE HEAD
WOBBLE ROLLER SUPPORT - TUBULAR R.H.S
F0952
F0954
F0956
F0958
SPIGGOT BRACKET
50 x 50mm
SPIGGOT BRACKET
65 x 40mm
SPIGGOT BRACKET
75 x 50mm
SPIGGOT BRACKET
100 x 50mm
Fit around RHS and tightened with bolt
F0960
F0962
F0964
SOCKET BRACKET
SOCKET BRACKET
SOCKET BRACKET
WELD ON
BOLT ON SINGLE
BOLT ON TWIN
F0930
SIDE RAIL - BARE GALVANISED ANGLE IRON

Galvanised 1.5M long 50x50mm slotted angle.
F0517
MAGNA PLANK: KIT

lm of Magna Plank complete with galvanised
brackets to bolt to existing supports.
MAGNA PLANK: BLUE 70 X 40mm
ROLLERS
SIDE RAILS
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
77
Positorque
Half axles sold per half but rated per pair

I0102
I0103
I0105
POSITORQUE
POSITORQUE
POSITORQUE
750 Kg PER PAIR

1000 Kg PER PAIR
1250 Kg PER PAIR
The Positorque axle is a simple rubberized suspension which uses

four (4) rubber rods mounted in each corner of of a square tubing
The swing arm is mounted at 30 degree for a low ride height.
Only available as half axles.
ALKO
TORSION SUSPENSION
Half axles sold per half but rated per pair

I0702
I0703
I0704
I0704-16
I0705
I0706
ALKO FULL AXLE

ALKO FULL AXLE
ALKO FULL AXLE
ALKO FULL AXLE
ALKO FULL AXLE
ALKO FULL AXLE
401 - 850 KG
851 - 1250 KG
1251 -1450 KG
1251 -1450 KG
1450 -1600 KG
1600 -2500 KG
I0710
I0714
I0716
I0718
I0720
I0722
ALKO HALF AXLE

ALKO HALF AXLE
ALKO HALF AXLE
ALKO HALF AXLE
ALKO HALF AXLE
ALKO HALF AXLE
400 Kg PER PAIR

850 Kg PER PAIR
1250 Kg PER PAIR
1450 Kg PER PAIR
1600 Kg PER PAIR
2500 Kg PER PAIR
The AL-KO I.R.S. axle uses simple and effective engineering.

The hexagonal axle tube houses three rubber elements held in
place by a triple fluted inner tube. Suspension movement between
bump and rebound compresses the rubber elements thus providing
dampening of road shocks.
The unique self-dampening characteristics of the rubber elements
slows down the rebound . Every AL-KO I.R.S. axle is manufactured
to exact engineering standards and tested for toe-in and camber
as well as load rated deflection using state-of-the-art alignment
technology. The AL-KO I.R.S. axles are also available in special
configurations, such as half axles.
78
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
Kit 1 - 500Kg SINGLE AXLE TRAILER
Kit 5 - 1500Kg TANDEM AXLE TRAILER
1x
1x
1x
2x
1x
1x
2x
1x
2x
2x
1x
B0111
D0801
D1755
C0101
C0801
1x
A0105
39mm ROUND AXLE: 1650mm

4 LEAF SPRING ASSEMBLY
U BOLT KIT
HUB ASSEMBLY - HOLDEN HT
COUPLING 50mm
LIGHTING KIT

(NO BRAKES)
1x
1x
1x
2x
1x
1x
B0207
D0107
D1770
C0103
A0112
E0080
40mm SQUARE AXLE: 1650mm

U BOLT KIT
HUB ASSEMBLY - HOLDEN HQ
COUPLING 50mm
LIGHTING KIT
1x C2901
5m C3402
1 x E0080

1x
1x
1x
2x
B0901
H0201
D 1780
HB200
(LANDCRUISER WHEELS)
2x
HC100
1x
1x
1x
1x
B0401
D0109
D 1775
C0804B
1x
A0105A
1x
A0105
1x C2901
5m C3402
1x E0080
45mm SLIMLINE AXLE: 1650mm

U BOLT KIT
BRAKE ASSEMBLY: 9 X 1-3/4
HYDRAULIC DRUM
HYDRAULIC OVERRIDE
COUPLING
SINGLE AXLE BRAKE KIT
3/16 COPPER TUBING
LIGHTING KIT

1x
1x
1x
2x
B0482
H0209
D 1784
HBI00A
2x
HC050
1x
A0105
1x C2901
5m C3402
1x E0080

U-BOLT KIT (16mm U-Bolts)
1.5 Tonne HUBS
SCREWED DUST CAP
HYDRAULIC DRUM
HYDRAULIC OVERRIDE
COUPLING
3/16 COPPER TUBING
LIGHTING KIT

5 LEAF ROCKER ASSEMBLY
U BOLT KITS
HUB ASSEMBLY - HOLDEN HT
HYDRAULIC DRUM
HYDRAULIC OVERRIDE
COUPLING
3/16 COPPER TUBING
LIGHTING KIT
1x C2901
6M C3402
50mm SQUARE AXLE: 1727 mm

U BOLT KITS
2 Tonne HUBS
SCREWED DUST CAP
BRAKE ASSEMBLY
11 X 2 HYDRAULIC DRUM
HYDRAULIC OVERRIDE
COUPLING
3/16 COPPER TUBING
Kit 7 - 2000Kg TANDEM ROCKER TRAILER

2x
1x
B0211
D0804
2x
2x
1x
D 1771
C0801
A0105A
1x C2903
8M C3402
1x E0080

7 LEAF ROCKER SPRING
ASSEMBLY
U BOLT KITS
BRAKE ASSEMBLY
HYDRAULIC OVERRIDE
COUPLING
TANDEM AXLE BRAKE KIT
3/16 COPPER TUBING
LIGHTING KIT
SAMPLE TRAILER KITS
B0107
D0105
D1755
C0101
A0112
E0080

1x
1x
4x
2x
2x
2x
B1001
H0203
D1807
D2008
D2106A
HB300
2x
HC820
1x
1x
A0102
H1910

190 X 65 X 16mm U BOLTS
63 X 63 X 12mm FISH PLATES
63mm ROUND SADDLES
3 Tonne HUBS
SCREWED DUST CAP
BRAKE ASSEMBLY
HYDR DISC & TWIN CALIPER
50MM COUPLING
HYDRASTAR ELECTRIC/
HYDRAULIC
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
79

2x
1x
2x
4x
B0486
D0890-16
D1784
HB100A
4x
HC300
1x
1x
A0102
H1915
1x
E0088

U-BOLT KITS (16mm U-BOLTS)
1.5 Tonne HUBS
SCREWED DUST CAP
BRAKE ASSEMBLY
10x2 ELECTRIC DRUM
COUPLING 50mm: 3 Tonne
TANDEM AXLE ELECTRIC
BRAKE-A-WAY UNIT
LIGHTING KIT

2x
1x
2x
4x
4x
1x
1x
1x
B0903
D0896-16 8 LEAF SPRING ASSEMBLY
D1780
U BOLT KITS
HB200
2 Tonne HUBS
SCREWED DUST CAP
HC400
BRAKE ASSEMBLY: 12 X 2
ELECTRIC DRUM
A0120
COUPLING: 4.5 Tonne
H1915
TANDEM AXLE ELECTRIC
BRAKE-A-WAY UNIT
E0088
LIGHTING KIT
Kit 11 - 750 Kg CAMPER TRAILER

(NO BRAKES)
SAMPLE TRAILER KITS
1x
2x
1x
1x
1x
1x
1x
B0401
C0124B
D0109
D1775
A0112
E0080
A0801
1650mm 45mm SLIM LINE AXLE

HUBS COMPLETE: L/CRUISER
SPRING ASSEMBLY: 8 X 45
U BOLT KIT: 12mm
50mm COUPLING
LIGHTING KIT
JOCKEY WHEEL
Kit 12 - 1250 Kg CAMPER TRAILER

(WITH HYDRAULIC BRAKES)
1x
1x
1x
1x
1x
B0401
C0804B
H0209
D1783
A0105
1x
6x
1x
1x
C2901
C3402
E0080
A0801
1650MM 4SMM SLIM LINE AXLE

HYD BRAKE ASSY: L/CRUISER
SPRING ASSEMBLY: 9 X 60
U BOLT KIT: 16mm
50mm HYDRAULIC OVERRIDE
COUPLING
BRAKE KIT
COPPER TUBING
LIGHTING KIT
JOCKEY WHEEL
Kit 13 - 1500 Kg CAMPER TRAILER :

(ELECTRIC BRAKES)
1x
1x
B0461
C1610
1x
H0209
1x
1x
D1784
A0190
1x
1x
E0080
A0801
AXLE 1650mm 1.5 TONNE

TRAILER ELECTRIC BRAKES
ON PARALLEL TURNING
SPRING ASSEMBLY
9 X 60 LEAF
U BOLT KIT: 16mm
TREGG POLY BLOCK
OFF-ROAD COUPLING
LIGHTING KIT
JOCKEY WHEEL
Kit 14 - 750 Kg GAFFA TRAILER

NO BRAKES
1x
I0805
2x
1x
1x
1x
C0124B
A0112
E0080
A0801
GAFFA TRAILING ARM

SUSPENSION
1.5 TONNE HUBS COMPLETE
50MM FIXED COUPLING
LIGHT KIT
JOCKEY WHEEL

WITH BRAKES
1x
I0805
2x
2x
1x
HB100A
HC050
A0199B
1x
6x
1x
1x
C2921
C3402
E0080
A0801
GAFFA TRAILING ARM

SUSPENSION
1.5 TONNE HUBS COMPLETE
HYDRAULIC DRUM BRAKES : 9
POLY BLOCK OVERRIDE
COUPLING COMPLETE
BRAKE KIT
COPPER TUNING
LIGHT KIT
JOCKEY WHEEL

WITH BRAKES
1x
I0805
1x
CO804B
1x
A0199B
1x
6x
1x
1x
C2921
C3402
E0080
A0801
GAFFA TRAILING ARM

SUSPENSION
S/LINE L/CRUISER
HUB & BRAKES
POLY BLOCK OVERRIDE
COUPLING COMPLETE
BRAKE KIT
COPPER TUBING
LIGHT KIT
JOCKEY WHEEL
80
Bayswater
Ph 9279 5777
Fx 9377 1156
OConnor
Ph 9314 2222
Fx 9337 1897
Wangara
Ph 9302 2800
Fx 9302 2600
POSTAL ADDRESS
for all written correspondence and payments
4 Katanning St, Bayswater Western Australia 6053
BAYSWATER - CENTRAL SALES
4 Katanning Street, Bayswater, Western Australia 6053
Phone : (08) 9279 5777 Fax : (08) 9377 1156 Email : sales@trailerparts.net.au
BAYSWATER - MANUFACTURING
6 Katanning Street, Bayswater, Western Australia 6053
Phone: (08) 9279 5777 Fax : (08) 9377 1156 Email : sales@trailerparts.net.au
OCONNOR - SOUTHERN SALES
81 Forsyth Street, OConnor, Western Australia 6163
Phone : (08) 9314 2222 Fax : (08) 9337 1897 Email : oconnor@trailerparts.net.au
WANGARA - NORTHERN SALES
61 Challenge Boulevard, Wangara, Western Australia 6065
Phone : (08) 9302 2800 Fax : (08) 9302 2600 Email : wangara@trailerparts.net.au
WEBSITE
WHEN ORDERING
please supply
Your Name and full Delivery Address - not just a box number.
Your Order Number if applicable.
Quote the part number and a brief product description.
Quantity of goods.
Freight Company details if applicable.
When ordering axles, confirm axle length by fax.
If at all possible, also FAX your requirements.
RECEIVAL OF GOODS
Check your goods immediately on receipt. We sometimes make mistakes but not many.
We will not be responsible for any subsequent costs relating to the supply of the wrong goods.
RETURN OF GOODS
If goods are wrongly supplied through our negligence we will gladly exchange when returned to our warehouse. However goods
returned through the fault of, or not required by, the customer will incur a restocking charge of 10%. We cannot accept for exchange,
goods that are damaged weathered or used. Goods will not be accepted for return after 7 days. All returns must be accompanied
with a copy of the purchase invoice.
ORDERS FOR SPECIALLY MANUFACTURED PARTS
Orders only processed against an irrevocable order or cash before manufacture and are non returnable.
IMPORTANT
All our goods are guaranteed against faulty workmanship.
It is the responsibility of the purchaser to ensure by his/her own enquiries that the goods are suitable in
capacity and design for the particular application. Any technical information is issued gratis
Our advice is free and gratis. We accept no responsibility for your finished products.
The purchaser is deemed to be in possession of sufficient technical knowledge to successfully manufacture his / her own finished
goods. Should you require professional advice we will supply you with the name of a professional engineer.
A word of advice - do not buy goods too light to save money - in the end it may prove costly.
This catalogue is copyright.
Apart from any fair dealings for the purposes of customers design, as permitted under the copyright act, no part may be reproduced
by any process without the written permission of the Proprietors of Trailer Parts Pty. Ltd.
Illustrations in this catalogue are for display only and may not necessarily represent the actual article.
Printed in Western Australia
e
u
g
o
l
a
t
a
C
e
n
i
l
On
s in stock
rt
a
p
f
o
e
g
n
a
r
Massive
Visit our warehouse or order your

parts and accessories online at
Bayswater
OConnor
Wangara
4 Katanning Street,
Bayswater WA 6053
Ph 9279 5777
Fx 9377 1156
81 Forsyth Street
OConnor WA 6163
Ph 9314 2222
Fx 9337 1897
61 Challenge Boulevard
Wangara WA 6065
Ph 9302 2800
Fx 9302 2600
oconnor@trailerparts.net.au
wangara@trailerparts.net.au
Website : www.trailerparts.net.au

Catalog Trailerparts

Uploaded by

Copyright:

Available Formats

Catalog Trailerparts

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog Trailerparts

Uploaded by

Copyright:

Available Formats

What parts does the catalogue cover?

What parts does the catalogue cover?

What information is provided for each part?

What information is provided for each part?

2011 CATALOGUE

Trailer Parts & Accessories

PART NUMBER PREFIX INDEX

WINCHES & BOAT TRAILER BITS

RIMS, TYRES & MUDGUARDS

RUBBER TORSION SUSPENSION

WALLACE PINTLE HOOK R7

WALLACE PINTLE HOOK R 15

WALLACE PINTLE HOOK R 20

WALLACE PINTLE HOOK & BALL

CAST PINTLE HOOK

CAST PINTLE HOOK & BALL

ROGERS PINTLE HOOK & BALL

ADAPTER FOR PINTLE HOOK

SNAPPER PIN FOR WALLACE PINTLE HOOK

SNAPPER PIN FOR PINTLE HOOK

Information on CRN is downloadable from http://rvcs-prodweb.dot.gov.au

RINGPULL COUPLING - FIXED

Please see chart on previous page on D Value ratings.

3 Tonne FIXED RING COUPLING

3.5 Tonne FIXED RING Coupling

5.0 Tonne Non-ADR FIXED RING coupling

RING PULL COUPLINGS - SWIVEL EYES

Please see chart on previous page on D Value ratings.

TELECOM RING PULL COUPLING

RING PULL COUPLINGS - OVERRIDE BRAKES

3.5 Tonne RING PULL OVERRIDE

3.5 Tonne RING PULL OVERRIDE - MECHANICAL

3.5 Tonne RING PULL OVERRIDE - HYDRAULIC

2000 KG : FORGED EYE RING COUPLING

2 Tonne RING PULL OVERRIDE

2 Tonne RING PULL OVERRIDE - MECHANICAL

2 Tonne RING PULL OVERRIDE - HYDRAULIC

2000 KG : CAST IRON EYE RING COUPLING

RING PULL OVERRIDE

RING PULL OVERRIDE - MECHANICAL

RING PULL OVERRIDE - HYDRAULIC

RING COUPLING SPARES

RING & SHAFT FOR A0160 (Telecom Ring & Shaft)

RING & SHAFT FOR A0118 (Steel Weld on Body)

RING & SHAFT FOR A0151 (Over-ride Ring Pull)

TRIGG HYDRAULIC ANTI SWIVEL

TRIGG MECHANICAL ANTI SWIVEL

Other minor spares also available. See TRIGG coupling spares

WELDABLE 50MM COUPLING :

STANDARD 50MM COUPLING : TRIGG

WELDABLE 50MM COUPLING Lockable.

BRASS COUPLING 50MM Lever action,

FIXED 50MM COUPLING 3500 Kg capacity

ALKO 50MM COUPLING :

ALKO 3500Kg FIXED COUPLING

ALKO PRESSED STEEL COUPLING

ALKO LEVER COUPLING NZ style lever

ALKO Stabiliser 50mm Coupling

SCREW DOWN 50MM : TRIGG