Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    A Basic Example: Setup and Definitions

    Uploaded by

    jegan172
    This program implements basic G and M codes to control a cutting tool along a tool-center path without cutter radius compensation. It uses G01, G03, and G04 codes for linear and arc moves and turning the cutter on and off, checking for a P argument for the G04 dwell time. The path consists of several connected arcs and lines in the X-Y plane to cut a shape before rapidly retracting the tool to home.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    A Basic Example: Setup and Definitions

    Uploaded by

    jegan172
    3 views1 page
    This program implements basic G and M codes to control a cutting tool along a tool-center path without cutter radius compensation. It uses G01, G03, and G04 codes for linear and arc moves and turning the cutter on and off, checking for a P argument for the G04 dwell time. The path consists of several connected arcs and lines in the X-Y plane to cut a shape before rapidly retracting the tool to home.

    Original Title

    Lathe Example

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This program implements basic G and M codes to control a cutting tool along a tool-center path without cutter radius compensation. It uses G01, G03, and G04 codes for linear and arc moves and turning the cutter on and off, checking for a P argument for the G04 dwell time. The path consists of several connected arcs and lines in the X-Y plane to cut a shape before rapidly retracting the tool to home.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    3 views1 page

    A Basic Example: Setup and Definitions

    Uploaded by

    jegan172
    This program implements basic G and M codes to control a cutting tool along a tool-center path without cutter radius compensation. It uses G01, G03, and G04 codes for linear and arc moves and turning the cutter on and off, checking for a P argument for the G04 dwell time. The path consists of several connected arcs and lines in the X-Y plane to cut a shape before rapidly retracting the tool to home.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    A Basic Example

    This first case implements a bare minimum of the most standard G and M-codes. For the G04 dwell, it
    uses a P argument, expressed in seconds. For controlling the cutting tool, it simply uses a discrete digital
    output. The path is the tool-center path, so no cutter-radius compensation is used.
    Setup and Definitions
    #define BitsPassed Q100 ; Var for checking passed args
    #define Parg Q116 ; Var for P argument
    #define Pval 32768 ; Val for checking if P passed
    #define CutterOn M1 ; Discrete cutter output
    CutterOn->Y:$078802,8,1 ; Machine Output 1
    &1 ; Address CS 1
    #1->2000X
    #2->2000Y
    #3->2000Z
    G03 X35.25 Y10.00 J5 ; CCW arc move
    G01 X35.25 Y50.10 ; Linear move
    G03 X30.25 Y55.10 I-5 ; CCW arc move
    G01 X10.00 Y55.10 ; Linear move
    G03 X5.00 Y50.10 J-5 ; CCW arc move
    G01 X5.00 Y10.00 ; Linear move
    G03 X10.00 Y5.00 I5 ; CCW arc move
    G01 Z5 ; Cutter up
    M05 ; Stop cutter
    G00 X0 Y0 ; Rapid move back to home
    M30 ; End of program (not actually needed)
    CLOSE

    You might also like