Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

BOP Replacement Parts Catalog

Download as pdf or txt
Download as pdf or txt
You are on page 1of 60

BOP Replacement Parts Catalog

CONTENTS
Cameron Elastomer Technology ..........................................................................2
Comparison of Ram-Type Blowout Preventers ....................................................3
Ram Availability Chart ........................................................................................3

U BOP
Description ....................................................................................................4
Hydraulic Control System..............................................................................5
Operating Data and Fluid Requirements ........................................................5
Large Bore Shear Bonnet Operating Data and
Fluid Requirements..................................................................................5
Specifications ................................................................................................6
Accessories ..................................................................................................6
Dimensions ..................................................................................................7
Part Numbers
7-1/16 3000 - 11 10,000......................................................................8
11 15,000 - 16-3/4 5000......................................................................9
16-3/4 10,000 - 26-3/4 3000 ............................................................10
Pipe Rams ..................................................................................................11
Hang-Off Weights ........................................................................................13
Shearing Blind Rams ..................................................................................13
Drill Pipe Shearing Requirements................................................................14
Large Bore Shear Bonnet ............................................................................15
Tandem Boosters ........................................................................................15
DSI and DVS Shear Rams............................................................................16
Variable Bore Rams ....................................................................................16
FLEXPACKERs ............................................................................................17
FLEXPACKER-NRs ......................................................................................17
Inserted Packers ..........................................................................................17
CAMRAM 350 Packers and Top Seals ........................................................17
Bonnet Rebuild Softgoods Kits....................................................................18
Hydraulic Bonnet Bolt System ....................................................................19
Bonnet Seals and Connecting Rod Seals ....................................................19
Bonnet Seal Carriers....................................................................................19

UII BOP
Description ..................................................................................................20
Hydraulic Control System............................................................................21
Dimensions ................................................................................................21
Part Numbers ..............................................................................................22
Pipe Rams ..................................................................................................23
Variable Bore Rams ....................................................................................23
Bonnet Seals and Connecting Rod Seals ....................................................23
Shearing Blind Rams ..................................................................................24
CAMRAM 350 Packers and Top Seals ........................................................24
Bonnet Seal Carriers....................................................................................19
Accessories ................................................................................................26

T BOP
Description ..................................................................................................25
Hydraulic Control System............................................................................26
Accessories ................................................................................................26
Dimensions ................................................................................................27
Part Numbers
13-5/8 15,000
BOP ................................................................................................28
Bonnet Subassembly ......................................................................29

18-3/4 15,000
BOP ................................................................................................30
Bonnet Subassembly ......................................................................31
Pipe Rams ..................................................................................................32
CAMRAM 350 Packers and Top Seals ........................................................32
Shearing Blind Rams ..................................................................................33
Variable Bore Rams ....................................................................................33

TL BOP
Description ..................................................................................................34
Rams ..........................................................................................................34
Heights ........................................................................................................35
Weights ......................................................................................................35
End-to-End Lengths ....................................................................................35
Operating Data
Manual Lock Screws ............................................................................35
Wedgelocks ..........................................................................................35
RamLocks..............................................................................................35
RamLocks with Tandem Boosters ..........................................................35
Super Shear Rams ................................................................................35
ST-Locks ..............................................................................................35
ST-Locks with Tandem Boosters............................................................35
Components
RamLock Bonnet Subassembly ............................................................36
RamLock Operating Piston Subassembly ..............................................36
ST-Lock Bonnet Subassembly ..............................................................38
ST-Lock Assembly ................................................................................39
ST-Lock Sequencing Valve Subassembly..............................................39

UL and UM BOPs
Description ..................................................................................................40
Components ................................................................................................41

DL BOP
Description ..................................................................................................42
Dimensions ................................................................................................43
Weights ......................................................................................................43
Components ................................................................................................43
Part Numbers
7-1/16 3000 - 11 15,000....................................................................44
13-5/8 - 21-1/4 2000 ........................................................................45
Replacement Part Kits..................................................................................46

C BOP
Description ..................................................................................................47
Rams ......................................................................................................47
Fluid Requirements......................................................................................47
Dimensions ................................................................................................47

S/QRC and G-2 BOPs


Description ..................................................................................................48
Pipe Rams ..................................................................................................49
Shear Rams ................................................................................................49
Wireline Rams ............................................................................................49
Clamp Connections ..........................................................................................50
Cameron Locations............................................................................................51
Cameron Terms and Conditions ........................................................................53

To Cover Page

Cameron
BOP Replacement Parts Catalog
Cameron provides all of the OEM products and services necessary to maintain the full range of Cameron drilling products This catalog
contains information on our worldwide network of CAMSERV aftermarket products and services as well as detailed information on
all of the replacement parts necessary for the following Cameron blowout preventers:

Ram-Type BOPs
U BOP
TL BOP

UII BOP
UL BOP

T BOP
UM BOP

Workover BOPs
C BOP

S/QRC Snubbing BOP

G-2 Snubbing BOP

Annular BOPs
D BOP
DL BOP

C O N N E C T
For additional information on products in this catalog or products which do not appear on these pages, Cameron has a myriad of additional resources available to you,
whether you prefer information in electronic or printed format; on the Internet or CD ROM; on your desktop or on your library shelf; Cameron can get you the comprehensive
information you need quickly.

Electronic Information
Cameron maintains a comprehensive website at www.camerondiv.com. The
Cameron website offers more than 50,000 pages of information on all product lines.
The most powerful tool available to Cameron customers via the website is the
Transact section. Transact is a secure extranet within the Cameron website available
only to Cameron customers. Future Transact features include E-Commerce which
will soon enable authorized customers to place orders from their desktop. Current
sections within Transact are:
Technical Library - access operation and maintenance manuals, engineering
bulletins and reports, assembly and testing procedures, inspection criteria,
technical papers, and experience lists.

Printed Information
Cameron maintains a comprehensive library of sales and marketing brochures and
catalogs in printed format. Customers can utilize one of several alternatives to
obtain these materials.

Parts and Pricing - review the list prices of Cameron standard products.

Cameron Sales Force - Customers can contact their local Cameron


representative who can order brochures to be mailed directly to them. Cameron
offers training CDs on many of its products and services. Customers can order
these CDs through local sales representatives.

Internet - customers can access the Cameron Document Ordering System to


receive free, printed copies of brochures via the mail or they can email Cameron
at mktcomm@camerondiv.com to request specific brochures.
Phone or Fax - customers can receive product brochures by telephoning the
Cameron Marketing Communications department in Houston at 713-939-2711
or by faxing 713-939-2735.

Training - access fully interactive, dynamic product-specific training modules


which include installation procedures and service requirements.
Mainframe Access- vendors can read product bills of material, verify revision
status, check customer property, review consigned inventory levels, and much
more in the Cameron SAP database.

CD ROMs
This catalog, along with other Cameron sales and marketing information, is available
on CD ROM. Customers can order the CD catalog via the Internet, phone or fax or
through the Cameron sales force. In addition, Cameron offers a library of training
CD ROMs on many of our products.

Document Ordering System - order free printed brochures or download


Acrobat .pdf files to print to your local printer.
1

Cameron Elastomer Technology


prediction testing is based on the Arrhenius principle of thermochemical
reactions. Elevated temperatures are used to accelerate the thermochemical
degradation of elastomer materials.
Cameron Elastomer Technology employees are experts in elastomer
technology and can take an idea from the testing phase through full product
development.
Today, there is a family of elastomer products specially formulated and
designed to meet the rigorous demands of the oilfield. These products, when
used in Cameron U, UII, T, TL, UL and UM, and C ram and D and DL annular
BOPs, improve performance, extend service life, reduce downtime, and lower
operating costs.
CAMRAM, CAMRAM 350, CAMULAR and CAMLAST elastomers
have set new standards in performance. Each is uniquely Cameron, including
design and manufacturing. Behind each product is the absolute commitment to
quality, performance and support that the industry has come to recognize as
hallmarks of Cameron.
An integral part of CETs Katy facility is a temperature controlled elastomer
warehouse. CET manufactured elastomer products and critical drilling metal
spares are readily available to meet customer requirements.

From its Katy facility west of Houston, Texas, Cameron Elastomer


Technology provides engineered solutions to elastomeric material problems.
State-of-the-art research, including associated mechanical design and
engineering, is conducted at this totally integrated manufacturing facility.
The plant is designed to support Cameron Division's elastomer components
and develop new products to meet the most stringent operating and
environmental conditions.
Cameron Elastomer Technology (CET) has extensive process development
capability supported by continuing research, a comprehensive testing laboratory
and engineering capability. These are combined to provide effective support for
the manufacturing of an extensive line of high-performance elastomer products.
CET offers molded products utilizing compression, transfer and injection
molding techniques. Critical molded products are qualification-tested prior to
release for production.
Cold chambers and ovens are available for testing elastomers in temperature
extremes ranging from -150F to 700F. Precise temperature control allows for
exposure of elastomer components to conditions that simulate the actual service
environment.
CET's facilities provide "life prediction" and immersion testing. The life-

SD-24101-96

Cameron Elastomer Technology plant, Katy, Texas

SD-10861-96

SD-10813-96

A ram-type packer is removed from an injection molding press.

The CET facility produces a wide variety of elastomers components.

Comparison of Cameron Ram-Type Blowout Preventers


developing new ram-type BOP designs. Cameron introduced the U II BOP
for subsea applications and has since developed the T BOP and the
lightweight TL, UL and UM models for land and subsea applications.
Regardless of the model, all of the pressure containing components in
Cameron ram-type BOPS are forged to provide added safety and reliability.

Cameron offers a wide range of ram-type BOPs to meet the dynamic


needs of the drilling industry. The Cameron U BOP was initially designed
for underwater drilling. Today, there are more U BOPs in the field
worldwide than any other ram-type BOP in the industry. As technology
and the needs of the drilling industry changed, Cameron responded by

Comparison of Cameron Ram-Type BOPs


Description
Bore Sizes
7-1/16

11

13-5/8

16-3/4

18-3/4

20-3/4
21-1/4

TL BOP

UM BOP

U BOP

Working Pressures

Working Pressures

Working Pressures

3000 psi WP

3000 psi WP

5000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

15,000 psi WP

3000 psi WP

5,000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

15,000 psi WP

3000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

15,000 psi WP

3000 psi WP

5000 psi WP

10,000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

3000 psi WP
2000 psi WP

5000 psi WP

10,000 psi WP
3000 psi WP

26-3/4

Side Ram Removal

Yes

No

No

Not Required

No

Available on large sizes

Hydraulic Stud Tensioning*


Bonnet Seal Carrier
Hydromechanical Locking Mechanism

Standard

Available

Available

RamLocks/ST-Lock/Wedgelocks

Wedgelocks

Wedgelocks

* Not required when using bonnet seal carrier

Ram Availability Chart


Description
Pipe Rams Available to Fit Standard Pipe Sizes

TL BOP

T BOP

UL/UM BOP

U BOP

U II BOP

Yes

Yes

Yes

Yes

Yes

Variable Bore Rams Available

In Some BOP Sizes

Yes

Yes

Yes

Yes

FLEXPACKER Rams Available

In Some BOP Sizes

No

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

Shearing Blind Rams Available

In Some BOP Sizes

Yes

Yes

Yes

Yes

DVS Shear Rams Available

In Some BOP Sizes

No

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

Yes

No

No

Yes (16-3/4")

No

Super Shear Casing Ram


Grip and Seal Rams Available

No

No

In Some BOP Sizes

In Some BOP Sizes

No

CAMRAM Top Seals Standard

Yes

Yes

Yes (through 18-3/4)

Yes (through 18-3/4)

Yes (through 18-3/4)

CAMRAM Packers Standard

Yes

Yes

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

CAMRAM 350 Packers and Top Seals Available

Yes

Yes

Yes

Yes

Yes

Rams Suitable for H 2S Service

Yes

Yes

Yes

Yes

Yes

Ram Wear Pads Standard

Yes

Yes

No

No

No

Ram-Type BOPs
U BOP UII BOP
UL BOP UM BOP

To Contents Page

U BOP
Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
pressure is released. The operating system can be interlocked using
sequence caps to ensure that the wedgelock is retracted before pressure is
applied to open the BOP.
For subsea applications, a pressure balance chamber is used with the
wedgelocks to eliminate the possibility of the wedgelock becoming unlocked
due to hydrostatic pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 11 through 17
for rams available to fit the U BOP.

The Cameron U BOP is the most widely used ram-type BOP for land, platform
and subsea applications worldwide and offers the widest range of sizes of any
Cameron ram-type BOP.
Like all other Cameron preventers, the rams in the U BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually
improved by increased well bore pressure.
Other features of the U BOP include:
Bonnet seal carrier is available to eliminate the need for high makeup
torque on bonnet studs and nuts.

SD-3772

Wedgelock Assembly

SD-5308

U Blowout Preventer

To Contents Page

U BOP Hydraulic Control System


Ram opening pressure opens the rams. Following ram change-out, this
pressure closes the bonnets. The rams are pulled outward, near the bonnets
before the bonnets begin moving toward the preventer body. This assures that
the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic
pressure draws the bonnets tightly against the preventer body and the bonnet
bolts are reinstalled to hold the bonnets closed.

The U blowout preventer is designed so that hydraulic pressure opens and


closes the rams and provides the means for quick ram change-out.
Ram closing pressure closes the rams. When the bonnet bolts are removed,
closing pressure opens the bonnet. After the bonnet has moved to the fully
extended position, the ram is clear of the body. An eyebolt can be installed in the
top of each ram to lift it out of the preventer.

U Blowout Preventer Hydraulic Control System

SD-84-05

Ram Open, Bonnet Closed


Ram Closed, Bonnet Open

U BOP Operating Data and Fluid Requirements


Bore Size and
Working
Pressure
7-1/16" All WP
11" Except 15,000 psi
11" 15,000 psi
13-5/8" Except 15,000 psi
13-5/8" 15,000 psi Model B
16-3/4" 3000 psi Model B
16-3/4" 5000 psi Model B
16-3.4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 3000 psi

Large Bore Shear Bonnet Operating Data and Fluid Requirements

Gals to Open Gals to Close Locking Closing Opening


Pipe Rams Pipe Rams Screw Turns Ratio Ratio
(1 Set)
(1 Set)
(Each End)
1.3
3.4
5.7
5.5
10.4
9.8
9.8
11.6
21.3
8.1
9.0
27.3
24.5
10.1

1.3
3.5
5.8
5.8
10.6
10.6
10.6
12.5
23.1
8.7
8.7
30.0
26.9
10.8

18
27
32
32
45
38
38
45
54
46
46
54
51
58

6.9:1
7.3:1
9.8:1
7.0:1
10.6:1
6.8:1
6.8:1
6.8:1
7.4:1
7.0:1
7.0:1
7.2:1
7.2:1
7.0:1

Bore Size and


Working
Pressure

2.2:1
2.5:1
2.2:1
2.3:1
3.6:1
2.3:1
2.3:1
2.3:1
3.7:1
1.3:1
1.3:1
4.0:1
4.0:1
1.0:1

7-1/16" All WP
11" Except 15,000 psi
11" 15,000 psi
13-5/8" Except 15,000 psi
13-5/8" 15,000 psi Model B
16-3/4" 3000 psi Model B
16-3/4" 5000 psi Model B
16-3.4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 3000 psi

To Contents Page

Gals to Open Gals to Close Locking Closing Opening


Pipe Rams Pipe Rams Screw Turns Ratio Ratio
(1 Set)
(1 Set)
(Each End)
__
__
__
__
__
6.8
8.9
10.5
16.0
18.2
18.2
18.2
__

6.0
9.0
10.9
16.2
19.0
19.0
19.1
__

27
32
32
45
38
38
45
__

12.0:1
15.2:1
10.8:1
16.2:1
10.4:1
10.4:1
10.4:1
__

4.8:1
3.7:1
4.5:1
6.0:1
4.4:1
4.4:1
4.4:1
__

14.3
14.3
__
__
__

14.9
14.9
__
__
__

46
46
__
__
__

10.8:1
10.8:1
__
__
__

1.7:1
1.7:1
__
__
__

U BOP Specifications and Accessories


The capital letters in the following designations refer to the three U BOP
dimensional views and dimensions charts shown on the following page.
A-1 Length - bonnets closed, locking screws locked
A-2 Length - bonnets opened, locking screws unlocked
A-3 Length - bonnets closed, with wedgelocks
A-4 Length - bonnets opened, with wedgelocks
B-1 Height - flanged
B-2 Height - clamp hubs
B Height - added height if 30" spacing is required for double
C Width - no side outlets
D Centerline of preventer to outlet flange or hub face. This distance is
variable and must be determined per individual specifications.
E-1 Centerline of side outlet (outlet below rams in double) to bottom flange
face
E-2 Centerline of side outlet (outlet below rams in double) to bottom hub
face
F-1 Top of upper ram to top flange face
F-2 Top of upper ram to top hub face
G Height of ram
H-1 Centerline of side outlet between rams to bottom flange face
H-2 Centerline of side outlet between rams to bottom hub face
J Top of lower ram to bottom of upper ram

Your Cameron representative can provide information on non-standard


BOP assemblies. The following specifications apply to typical Cameron
U type BOPs:
Side outlets to 4-1/16" (7-1/16" on 26-3/4" BOPs) can be provided beneath
each set of rams on either or both sides of U BOPs. Side outlets can be
studded, open-face flange or clamp hub with the same pressure rating as the
vertical run connections.
Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A
or applicable standards. Type 6BX flanges are standard for 10,000 and
15,000 psi working pressures and for 5000 psi for 13-5/8" and larger bore
BOPs.
Hydraulic control connections for operation of rams and bonnets are 1" NPT.
There are two connections for each set of rams. Wedgelock connections are
1/2" NPT.
The dimensions chart shown on the following page does not include spacers
between rams for double ram models. U BOPs with spacers to clear tool
joints can be obtained on special order.

U BOP Standard Accessories


Size and
Working Pressure
7-1/16" 3000 psi
7-1/16" 5000 psi
7-1/16" 10,000 and 15,000 psi
11" 3000, 5000 and 10,000 psi
11" 15,000 psi
13-5/8" 3000 and 5000 psi
13-5/8" 10,000 psi
13-5/8" 15,000 psi
16-3/4" 3000 and 5000 psi
16-3/4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 3000 psi

Ram
Lube*
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878

Cameron
Box Wrench*
713114-08
713114-08
713114-10
713114-10
713114-13
713114-10
713114-10
***
713114-13
***
***
713114-08
713114-10
***
***
713114-13

Allen Wrench*
Packing Screw
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01
008721-01

* One required.
**Two required for single preventer, four for double preventer.
*** Commercially available sockets are recommended.

To Contents Page

Handwheel**
005457
005457
005457
005298
005298
005298
005298
005298
005298
005298
005298
005298
005298
005298
005298
005298

Universal
Joint**
006018-01
006018-01
006018-01
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03
006018-03

Extension
Wrench*
005652
005652
005652
005526
005526
005526
005526
005526
005526
005526
005526
005526
005526
005526
005526
005526

U BOP Dimensions

SD-84-201

Top View - Single or Double U BOP

SD-84-201

Side View - Double U BOP

SD-9928

Side View - Single U BOP

Single Open-Face Flange or Clamp Hub U BOP Dimensions*


Size
7-1/16"*
7-1/16"*
7-1/16"
7-1/16"
11"*
11"*
11"*
11" Model 79
13-5/8"
13-5/8"
13-5/8"
13-5/8" Model B*
16-3/4" Model B
16-3/4" Model B
16-3/4"*
18-3/4"
20-3/4"
21-1/4"
21-1/4"
21-1/4"**
26-3/4"

Pressure
Rating
(psi)

Vertical
Bore
(in.)

A-1

A-2

A-3

A-4

B-1

3000
5000
10,000
15,000
3000
5000
10,000
15,000
3000
5000
10,000
15,000
3000
5000
10,000
10,000
3000
2000
5000
10,000
3000

7-1/16
7-1/16
7-1/16
7-1/16
11
11
11
11
13-5/8
13-5/8
13-5/8
13-5/8
16-3/4
16-3/4
16-3/4
18-3/4
20-3/4
21-1/4
21-1/4
21-1/4
26-3/4

74.000"
74.000"
74.000"
74.000"
96.250"
96.250"
96.250"
124.000"
112.125"
112.125"
114.125"
139.000"
127.250"
129.250"
139.000"
156.375"
143.688"
143.688"
164.250"
163.375"
169.625"

109.500"
109.500"
109.500"
109.500"
146.875"
146.875
146.875
175.312"
171.500"
171.500"
172.750"
214.375"
204.562"
202.125
218.375"
242.125"
226.812"
226.812"
247.250"
250.375"
275.375"

__
__
__
__
__

__
__
__
__
__

110.125"
110.125"
124.500"
122.688"
122.688"
124.688"
152.250"
147.250"
149.250"
155.500"
166.500"
163.938"
163.938"
180.938"
181.125"
__

150.188"
150.188"
167.125"
166.062"
166.062"
167.312"
205.500"
199.375"
202.250"
212.000"
226.625"
223.875"
223.875"
239.250"
239.500"
__

24.062"
27.500"
30.562"
31.812"
29.062"
34.312"
35.688"
44.812"
31.312"
33.812"
41.688"
53.688"
40.062"
43.062"
49.688"
56.000"
40.562"
37.188"
50.938"
66.000"
48.312"

B-2
__
25.188"
27.188"
__
__
29.312"
32.188"
33.875"
__
31.938"
32.812"
42.000"
31.750"
34.938"
41.938"
43.234"
33.312"
33.312"
46.125"
53.000"
__

E-1

20.250"
20.250"
20.625"
20.625"
25.125"
25.125"
25.750"
32.000"
29.250"
29.250"
30.250"
39.500"
35.750"
35.750"
39.500"
42.500"
39.516"
39.516"
42.500"
47.250"
46.250"

8.750"
10.406"
11.062"
11.688"
9.812"
12.438"
13.125"
16.688"
10.312"
11.562"
15.125"
21.375"
13.312"
14.812"
19.375"
20.500"
14.312"
12.625"
17.969"
24.531"
17.438"

E-2

F-1

__

7.844"
9.625"
12.031"
12.656"
10.531"
13.156"
13.844"
17.781"
11.531"
12.781"
17.094"
22.844"
15.406"
16.906"
20.219"
22.000"
16.281"
14.594"
18.719"
26.250"
19.906"

9.250"
9.375"
__
__
9.938"
11.375"
11.219"
__
10.625"
10.688"
15.500"
9.156"
10.750"
15.500"
13.875"
10.688"
10.688"
17.188"
18.031"
__

F-2

Approx.
Weight
(lbs)

__
8.469"
10.344"
__
__
10.656"
12.094"
12.312"
__
11.844"
12.656"
17.000"
11.250"
12.844"
16.344"
15.344"
12.656"
12.656"
14.688"
19.750"
__

5.50"
5.50"
5.50"
5.50"
6.75"
6.75"
6.75"
9.25"
7.50"
7.50"
7.50"
8.00"
9.25"
9.25"
9.25"
12.00"
8.00"
8.00"
13.50"
13.50"
8.00"

2600
2800
3550
3800
5300
5600
6400
10,300
7200
7700
10,300
23,700
13,700
13,750
23,300
28,900
13,650
13,250
30,000
34,650
24,000

*Available with stud x flange connections.

Double Open-Face Flange or Clamp Hub U BOP Dimensions*


Press.
Rating
(psi)

Vert.
Bore
(in.)

A-1

A-2

7-1/16"*

3000

7-1/16

74.000"

109.500"

__

__

41.000" __

__

7.844"

5.50" 25.688"

__

11.438"

5000

7-1/16"*

5000

7-1/16

74.000"

109.500"

__

__

44.188" 41.875" 18.812" 20.250" 10.406"

9.250"

9.625"

8.469"

5.50" 27.094"

25.938" 11.188"

5200

7-1/16"

10,000

7-1/16

74.000"

109.500"

__

__

7-1/16

74.000"

109.500"

__

__

10.344"
__

__

__

9.375" 12.031"
__
12.656"
__
10.531"

__

6.75

27.438" 12.562"
__
12.562"
__
13.438"

6400

15,000

48.625" 45.250" 17.438" 20.625" 11.062"


49.875" __
17.438" 20.625" 11.688"
49.250" __
16.562" 25.125" 9.812"

5.50" 29.125"

7-1/16"

Size

A-3

A-4

B-1

B-2

B***

18.562" 20.250"

E-1
8.750"

E-2

F-1

F-2
__

H-1

5.50" 29.750"

Approx.
Weight
(lbs)

6750

11"*

3000

11

96.250"

146.875"

11"*

5000

11

96.250"

146.875"

110.125"

150.188"

54.500" 49.500" 16.562" 25.125" 12.438"

9.938" 13.156"

10.656"

6.75" 32.625"

30.125" 13.438" 10,200

11"*

10,000

11

96.250"

146.875"

110.125"

150.188"

55.875" 52.375" 16.562" 25.750" 13.125" 11.375" 13.844"

12.094"

6.75" 33.312"

31.562" 13.438" 11,300

11" Model 79

15,000

11

124.000"

175.312"

124.500"

167.125"

13-5/8 112.125"

171.500"

122.688"

166.062"

12.312"
__

9.25" 41.625"

3000

69.750" 58.812" 14.312" 32.000" 16.688" 11.219" 17.781"


53.375" __
15.438" 29.250" 10.312" __
11.531"

7.50" 32.375"

36.156" 15.688" 18,400


__
14.562" 14,300

13-5/8"

5000

13-5/8 112.125"

171.500"

122.688"

166.062"

55.875" 54.000" 15.438" 29.250" 11.562" 10.625" 12.781"

11.844"

7.50" 33.625"

32.688" 14.562" 14,800

13-5/8"

10,000

13-5/8 114.125"

172.250"

124.688"

167.312"

66.625" 57.750" 12.562" 30.250" 15.125" 10.688" 17.094"

12.656"

7.50" 40.062"

35.625" 17.438" 18,400

13-5/8" Mod B*

15,000

13-5/8 139.000"

214.375"

152.250"

205.500"

81.750" 70.125"

17.000"

8.00" 49.438"

43.562" 20.062" 43,250

3000

16-3/4 127.250"

204.562"

147.250"

199.375"

65.875" 57.562" 13.438" 35.750" 13.312"

11.250"

9.25" 39.125"

34.969" 16.562" 26,650

13-5/8"

16-3/4" Mod B
16-3/4" Mod B

9.938" 39.500" 21.375" 15.500" 22.844"


9.156" 15.406"

30.000"

H-2

9900

5000

16-3/4 129.250"

202.125"

149.250"

202.250"

68.875" 60.750" 13.438" 35.750" 14.812" 10.750" 16.906"

12.844"

9.25" 40.625"

36.562" 16.562" 26,940

16-3/4"*

10,000

16-3/4 139.000"

218.375"

155.500"

212.000"

77.750" 70.000" 11.188" 39.500" 19.375" 15.500" 20.219"

16.344"

9.25" 47.438"

43.562" 18.812" 43,500

18-3/4"

10,000

18-3/4 156.375"

242.125"

166.500"

226.625"

87.125" 74.000" 10.875" 42.500" 20.500" 13.875" 22.000"

15.344" 12.00" 51.500"

44.875" 19.125" 56,950

20-3/4"

3000

20-3/4 143.688"

226.812"

163.938"

223.875"

66.125" 58.875" 12.438" 39.516" 14.312" 10.688" 16.281"

12.656"

8.00" 39.875"

36.250" 17.562" 25,550

21-1/4"

2000

21-1/4 143.688"

226.812"

163.938"

223.875"

62.750" 58.875" 12.438" 39.516" 12.625" 10.688" 14.594"

12.656"

8.00" 38.188"

36.250" 17.562" 25,150

21-1/4"

5000

21-1/4 164.250"

247.250"

180.938"

239.250"

82.375" 74.000" 12.375" 42.500" 17.969" 17.188" 18.719"

14.688" 13.50" 49.031"

45.000" 17.625" 58,000

10,000

21-1/4 163.375"

250.375"

3000

26-3/4 169.625"

275.375"

181.125"
__

239.500"
__

19.750" 13.50" 58.594"


__
8.00" 48.000"

52.094" 20.562" 65,500


__
22.562" 44,200

21-1/4"*
26-3/4"

100.062" 87.062"
78.875" __

9.438" 47.250" 24.531" 18.031" 26.250"


7.438" 46.250" 17.438" __
19.906"

*Available with stud x flange connections.

To Contents Page

7-1/16" 3000 - 11" 10,000 psi WP U BOP Part Numbers


22

37

34

12

36

38

16

15

24

18

22

35

17

19

40

10

SD-5287

42

26

14

13

28

27

33

29

32

11

31

30

25

23

21

41

20

U BOP Exploded View

U Blowout Preventer Part Numbers


Item
No.
1
2
2A
3
4
5
5A
6
6A
7
8
8A
9
10
11
12
12A
13
13A
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

Description
Description

Qty
Sgl

Qty
Dbl

7-1/16"
3000
psi
Model II

7-1/16"
5000
psi
Model II

__
Body
1
1
Intermediate Flange
2
4
030266-03
Intermediate Flange/Shear
041499-03**
Bonnet
2
4
030278-04
Ram Assembly
2
4
0644216-()
Piston, Operating
2
4
236501-15-11-08
Piston, Operating/Shear
049116-01**
Cylinder, Operating
2
4
030274-02
Cylinder, Operating/Shear
041365-02
Housing, Locking Screw
2
4
030308-01
Locking Screw
2
4
030326
Locking Screw/Shear
049258-01
Piston, Ram Change/Open
2
4
030324
Piston, Ram Change/Close
2
4
030325
Cylinder, Ram Change
4
8
030273-02
Bolt, Bonnet
8
16 030312-06
Bolt, Bonnet/Shear
041366-06
Stud, Locking Screw Housing
16
32 219065-10-04-41
Stud, Locking Screw Housing/Shear
038732-57-00-54
Nut, Locking Screw Housing
16
32 2709000-10-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
005940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
020101-78-01
Ring, Plastic Energizing
2
4
018586-12
Seal Ring, Connecting Rod
2
4
212741-37-00-01
__
Ring Back-Up
4
8
Seal, Bonnet
2
4
644197-01-00-01
Pin, Ram Guide
4
8
030313-02
O-Ring, Operating Cylinder
4
8
702645-44-61
O-Ring, Operating Piston Rod to Int Flg
2
4
018492-92
Lip Seal, Operating Piston
2
4
710541
Seal Ring, Tail Rod
2
4
011741-32
O-Ring, Wiping
2
4
702645-33-11
O-Ring, Ram Change Piston to Body
4
8
702645-32-41
O-Ring, Ram Change Piston Rod to Int Flg 4
8
702645-32-91
O-Ring, Ram Change Cylinder to Int Flg
4
8
702645-33-81
O-Ring, Ram Change Cylinder to Bonnet
4
8
702645-34-21
O-Ring, Ram Change Piston
4
8
702645-33-21
O-Ring, Bonnet Bolt Retainer
8
16 702645-22-31
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-22-00-50
Gland, Bleeder
2
4
017454-08
Plug, Bleeder
2
4
017454-09
Lifting Eye
2
2
011849-01
Packing, Plastic
10
20 007650-25
Washer
2
4
689523-04
Ring, Retainer
2
4
018572-83
Wear Ring, Operating Piston
2
4
049223-03
687117-01
Spacer, Shear****

__

7-1/16"
10,000
psi
Model II
__

030266-03
041499-03**
030278-03
644216-()
236501-15-11-08
049116-01**
030274-02
041365-02
030308-01
030326
049258-01
030324
030325
030273-02
030312-02
041366-02
219065-10-04-41
038732-57-00-54
2709000-10-01
M517988
005940-09
005930-05-10
020101-78-01
018586-12
212741-37-00-01
__

030266-01
041499-01**
030278-02
644216-()
236501-15-11-08
049116-01**
030274-02
041365-02
030308-01
030326
049258-01
030324
030325
030273-02
030312-07
041366-07
219065-10-04-41
219065-10-05-41
2709000-10-01
M517988
005940-09
005930-05-10
2010178-01
018586-12
212741-37-00-01
021792-21
644197-01-00-01 644197-01-00-01
030313-02
030313-02
702645-44-61
702645-44-61
018492-92
018492-92
710541
710541
011741-32
011741-32
702645-33-11
702645-33-11
702645-32-41
702645-32-41
702645-32-91
702645-32-91
702645-33-81
702645-33-81
702645-34-21
702645-34-21
702645-33-21
702645-33-21
702645-22-51
702645-22-91
702585-22-00-50 702585-22-00-50
017454-08
017454-08
017454-09
017454-09
011849-01
011849-01
007650-25
07650-25
689523-04
689523-04
018572-83
018572-83
049223-03
049223-03
687117-01
687117-01

7-1/16"
15,000
psi
Model II

To Contents Page

11"
5000
psi
Model II

11"
10,000
psi
Model II

__

__

__

__

030266-01
041499-01**
030278-01
644216-()
236501-15-11-08
049116-01**
030274-02
041365-02
030308-01
030326
049258-01
030324
030325
030273-02
030312-01
041366-22
219065-10-04-41
219065-10-05-41
2709000-10-01
M517988
005940-09
005930-05-10
2010178-01
018586-12
212741-37-00-01
021792-21
644197-01-00-01
030313-02
702645-44-61
018492-92
710541
011741-32
702645-33-11
702645-32-41
702645-32-91
702645-33-81
702645-34-21
702645-33-21
702645-23-21
702585-22-00-50
017454-08
017454-09
011849-01
007650-25
689523-04
018572-83
049223-03
687117-01

030267-03
041457-03**
030268-01
644219-()
673178
698914**
030274-03
041365-03**
030308-02
030365
046628-01
030362
030363
030273-03
030312-04
041366-04
219065-12-05-01
219065-12-06-51
2709000-12-01
M517988
005940-09
005930-05-10
2010178-02
018586-13
212741-38-00-01
021792-22
644197-02-00-01
030313-03
702645-45-11
018492-91
710539
212741-33-00-01
702645-33-51
702645-32-61
702645-33-11
031423-25-13-85
2010180-02
702645-33-51
702645-22-71
702585-25-00-50
017454-08
017454-09
011849-01
007650-25
689523-05
018572-84
049223-02
687117-02

030267-03
041457-03**
030268-02
644219-()
673178
698914**
030274-03
041365-03**
030308-02
030365
046628-01
030362
030363
030273-03
030312-03
041366-03
219065-12-05-01
219065-12-06-51
2709000-12-01
M517988
005940-09
005930-05-10
2010178-02
018586-13
212741-38-00-01
021792-22
644197-02-00-01
030313-03
702645-45-11
018492-91
710539
212741-33-00-01
702645-33-51
702645-32-61
702645-33-11
031423-25-13-85
2010180-02
702645-33-51
702645-22-91
702585-25-00-50
017454-08
017454-09
011849-01
007650-25
689523-05
018572-84
049223-02
687117-02

030267-03
041457-03**
030268-03
644219-()
163129-01
698914**
030274-03
041365-03**
030308-02
030365
046628-01
030362
030363
030273-03
030312-05
041366-05
219065-12-05-01
219065-12-06-51
2709000-12-01
M517988
005940-09
005930-05-10
2010178-02
018586-13
212741-38-00-01
021792-22
644197-02-00-01
030313-03
702645-45-11
018492-91
710539
212741-33-00-01
702645-33-51
702645-32-61
702645-33-11
031423-25-13-85
2010180-02
702640-33-51
702640-23-41
702585-25-00-50
017454-08
017454-09
011849-01
007650-25
689523-05
018572-84
049223-02
687117-02

*A large bore shear bonnet is available for these sizes. For part numbers, see page 15.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 15
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.

11"
3000
psi
Model II

11" 15,000 - 16-3/4" 5000 psi WP U BOP Part Numbers


22

15

24
37

34

12

36

38

19

18

22

35

17

16

40

10

SD-5287

42

26

14

13

28

27

33

29

32

11

31

30

23

25

21

41

20

U BOP Exploded View

U Blowout Preventer Part Numbers


Item
No.
1
2
2A
3
4
5
5A
6
6A
7
8
8A
9
10
11
12
12A
13
13A
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

Description
Description

Qty
Sgl

Qty
Dbl

11"
15,000
psi
Model 79

13-5/8"
3000
psi
Model II

__
Body
1
1
Intermediate Flange
2
4
049391-01
Intermediate Flange/Shear
*
Bonnet
2
4
031241
Ram Assembly
2
4
644222-()
Piston, Operating
2
4
698481
Piston, Operating/Shear
*
Cylinder, Operating
2
4
030274-01
__
Cylinder, Operating/Shear
Housing, Locking Screw
2
4
030308-03
Locking Screw
2
4
030846
__
Locking Screw/Shear
Piston, Ram Change/Open
2
4
031239
Piston, Ram Change/Close
2
4
031238
Cylinder, Ram Change
4
8
030273-01
Bolt, Bonnet
8
16 030312-12
__
Bolt, Bonnet/Shear
2
4
Stud, Locking Screw Housing
16
32 219065-14-07-51
__
Stud, Locking Screw Housing/Shear
Nut, Locking Screw Housing
16
32 2709000-14-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
005940-09
Pipe Plug, Plastic Packing
2
4
05930-05-10
Ring, Plastic Packing
2
4
2010178-02
Ring, Plastic Energizing
2
4
018586-13
Seal Ring, Connecting Rod
2
4
212741-38-00-01
Ring Back-Up
4+
8+ 021792-22
Seal, Bonnet
2
4
049272-03
Pin, Ram Guide
4
8
030313-01
O-Ring, Operating Cylinder
4
8
702645-45-51
O-Ring, Operating Piston Rod to Int Flg
2
4
018492-91
Lip Seal, Operating Piston
2
4
710538
Seal Ring, Tail Rod
2
4
212741-34-00-01
O-Ring, Wiping
2
4
702645-33-71
O-Ring, Ram Change Piston to Body
4
8
702645-32-81
O-Ring, Ram Change Piston Rod to Int Flg 4
8
702645-33-31
O-Ring, Ram Change Cylinder to Int Flg
4
8
702645-34-61
O-Ring, Ram Change Cylinder to Bonnet
4
8
702645-42-51
O-Ring, Ram Change Piston
4
8
702645-33-81
O-Ring, Bonnet Bolt Retainer
8
16 702645-23-91
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-25-00-54
Gland, Bleeder
2
4
017454-08
Plug, Bleeder
2
4
017454-09
Lifting Eye
2
2
011849-01
Packing, Plastic
10
20 007650-25
Washer
2
4
689523-05
Ring, Retainer
2
4
018572-84
Wear Ring, Operating Piston
2
4
049223-01
687117-03
Spacer, Shear****

13-5/8"
5000
psi
Model II

13-5/8"
10,000
psi
Model II

__

__

__

030270-01
686242**
030284-02
644225-()
679816
687542**
030274-01
041365-01**
030308-03
030307
030846
030310
030309
030273-01
030312-09
041366-09
005918-76-10
219065-14-07-51
2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
__

030270-01
686242**
30284-01
644225-()
679816
687542**
030274-01
041365-01**
030308-03
030307
030846
030310
030309
030273-01
030312-01
041366-01
005918-76-10
219065-14-07-51
2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
__

031216
686767**
031241
644225-()
678512
678512-00-00-02
030274-01
041365-01**
030308-03
030307
030846
031239
031238
030273-01
236519-34-11
041366-12
005918-76-10
219065-14-07-51
2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
021792-26
644197-03-00-01 644197-03-00-01 644197-03-00-01
030313-01
030313-01
030313-01
702645-45-51
702645-45-51
702645-45-51
018492-90
018492-90
018492-90
710538
710538
710538
212741-34-00-01 212741-34-00-01 212741-34-00-01
702645-33-71
702645-33-71
702645-33-71
702645-32-81
702645-32-81
702645-32-81
702645-33-31
702645-33-31
702645-33-31
702645-34-61
702645-34-61
702645-34-61
702645-42-51
702645-42-51
702645-42-51
702645-33-81
702645-33-81
702645-33-81
702645-23-11
702645-23-21
702645-23-91
702585-25-00-44 702585-25-00-44 702585-25-00-54
017454-08
017454-08
017454-08
017454-09
017454-09
017454-09
011849-01
011849-01
011849-01
007650-25
007650-25
007650-25
689523-01
689523-01
689523-01
018572-85
018572-85
018572-85
049223-01
049223-01
049223-01
687117-03
687117-03
687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 15.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 15.
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
+11" 15,000 psi requires 8 for single, 16 for double.

To Contents Page

13-5/8"
15,000
psi
Model B

16-3/4"
3000
psi
Model B

__

__

698899
615538-01
691849
644228-()
698996
615539-01
030274-06
__

038944

038843-02
644231-()
614374-01

030274-06
__

030308-06
695234
__

030308-06
038901
__

038847
038848-01
030273-06
030312-25
__

038946
038947
030273-07
030312-17
__

__

2709000-14-01
M517988
005940-09
005930-05-10
012469-52
018586-14
212741-44
__

038844
041408
038843-01
644231-()
689562
694085**
030274-06
041365-06**
030308-06
038901
695234
038847
038848-01
030273-06
030312-16
041366-16
219065-14-04-71
5918-34-10
2709000-14-01
M517988
005940-09
005930-05-10
012469-52
018586-14
212741-44
__

046613-04
030313-06
702645-46-11
2708811-01
710542
212741-45
702645-34-21
702645-33-21
031423-21-13-85
702645-35-41
702645-43-41
702645-34-41
702645-23-21
702585-31-00-44
017454-08
017454-09
011849-01
007650-25
689523-02
033186-85
049223-04
__

644197-04-00-01
030313-06
702645-46-11
2708811-01
710542
212741-45
702645-34-21
702645-33-21
031423-21-13-85
702645-35-41
702645-43-41
702645-34-41
702645-23-71
702585-31-00-54
017454-080
017454-09
011849-01
007650-25
689523-02
033186-85
049223-04
687117-05

219065-14-07-51 005918-78-10
__
__
2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
021792-26
644196-01
030313-08
702645-46-11
18492-90
710542
212741-45
702645-34-21
702645-33-21
031423-21-13-85
702645-35-41
702645-43-41
702645-34-41
702645-24-51
702585-31-00-54
017454-08
017454-09
011849-01
007650-25
689523-01
018572-85
049223-04
687117-05

16-3/4"
5000
psi
Model B

16-3/4" 10,000 - 26-3/4" 3000 psi WP U BOP Part Numbers


22

37

34

12

36

38

16

15

24

19

18

22

35

17

40

10

SD-5287

42

26

14

13

28

27

33

29

32

11

31

30

23

25

21

20

41

U BOP Exploded View

U Blowout Preventer Part Numbers


Item
No.
1
2
2A
3
4
5
5A
6
6A
7
8
8A
9
10
11
12
12A
13
13A
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

Description
Description

Qty
Sgl

Qty
Dbl

16-3/4"
10,000
psi
Model II

18-3/4"
10,000
psi
Model II

__
Body
1
1
Intermediate Flange
2
4
691848
Intermediate Flange/Shear
*
Bonnet
2
4
691849
Ram Assembly
2
4
644231-()
Piston, Operating
2
4
692828
Piston, Operating/Shear

615536-01
Cylinder, Operating
2
4
041365-06
__
Cylinder, Operating/Shear

Housing, Locking Screw


2
4
030308-06
Locking Screw
2
4
695234
__
Locking Screw/Shear

Piston, Ram Change/Open


2
4
692756
Piston, Ram Change/Close
2
4
692759
Cylinder, Ram Change
4
8
030273-13
Bolt, Bonnet
8
16 030312-24
__
Bolt, Bonnet/Shear

Stud, Locking Screw Housing


16
32 219065-14-06
__
Stud, Locking Screw Housing/Shear

Nut, Locking Screw Housing


16
32 2709000-14-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
005940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
012469-52
Ring, Plastic Energizing
2
4
018586-14
Seal Ring, Connecting Rod
2
4
212741-44
Ring Back-Up

021792-34
Seal, Bonnet
2
4
644197-04-00-01
Pin, Ram Guide
4
8
030313-06
O-Ring, Operating Cylinder
4
8
702645-46-11
O-Ring, Operating Piston Rod to Int Flg
2
4
2708811-01
Lip Seal, Operating Piston
2
4
710542
Seal Ring, Tail Rod
2
4
212741-45
O-Ring, Wiping
2
4
702645-34-21
O-Ring, Ram Change Piston to Body
4
8
702645-33-21
O-Ring, Ram Change Piston Rod to Int Flg 4
8
031423-21-13-85
O-Ring, Ram Change Cylinder to Int Flg
4
8
702645-35-41
O-Ring, Ram Change Cylinder to Bonnet
4
8
702645-43-41
O-Ring, Ram Change Piston
4
8
702645-34-41
O-Ring, Bonnet Bolt Retainer
8
16 702645-24-51
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-31-00-72
Gland, Bleeder
2
4
017454-08
Plug, Bleeder
2
4
017454-09
Lifting Eye
2
2
011849-01
Packing, Plastic
10
20 007650-25
Washer
2
4
689523-02
Ring, Retainer
2
4
033186-35
Wear Ring, Operating Piston
2
4
049223-04
687117-05
Spacer, Shear****

__

20-3/4"
3000
psi
Model II
__

041458
__
041459
644234-()
041460
__
030274-13
__
030308-09
041085
__
040961
040960
030273-09
030312-23
__
005919-38-10
__
2709000-18-01
M517988
005940-09
005930-05-10
012469-72
018586-19
212741-60
021793-40
644197-05-00-01
030313-07
2708812-01
041602-04-13-85
710543
212741-36-00-01
702645-34-51
702645-34-01
2010180-02
702645-43-51
702645-43-81
030101-83-13-85
702645-24-71
702585-36-00-76
017454-08
017454-09
011849-01
007650-25
689523-01
018572-85
049223-07
__

030911-01
041496-01**
030835-01
044256-()
690058-03
693405**
030274-04
041365-04
030308-04
030846
034233
030848
030849
030273-04
030312-10
041366-10
219065-14-06-01
219065-14-07-51
2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
__

21-1/4"
2000
psi
Model II
__
030911-01
041496-01**
030835-02
044256-()
690058-03
693405**
030274-04
041365-04**
030308-04
030846
034233
030848
030849
030273-04
030312-11
041366-11
219065-14-06-01
219065-14-07-51
2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
__

21-1/4"
5000
psi
Model II
__
__
049955-01
049963-01
644240-()
049954-01
__
030274-11
__
030308-08
041085
__
041064
041065
030273-11
030312-26
__
005919-38-10
__

2709000-18-01
M517988
005940-09
005930-05-10
012469-70
018586-18
011741-58
021793-39
046613-16
046613-16
046613-09
030313-04
030313-04
030313-07
702645-45-51
702645-45-51
702645-47-01
018492-90
018492-90
30101-88-13-85
710538
710538
710544
212741-34-00-01 212741-34-00-01 212741-36-00-01
702645-33-71
702645-33-71
702645-34-51
702645-33-61
702645-33-61
702645-34-31
702645-34-11
702645-34-11
031423-52-13-85
702645-43-71
702645-43-71
702645-44-01
702645-43-91
702645-43-91
702645-44-21
702645-42-51
702645-42-51
702645-43-11
702645-22-91
702645-22-71
702645-24-71
702585-28-00-50 702585-28-00-50 702585-36-00-93
017454-08
017454-08
017454-08
017454-09
017454-09
017454-09
011849-01
011849-01
011849-01
007650-25
007650-25
007650-25
689523-01
689523-01
002353-46
018572-85
018572-85
033186-92
049223-10
049223-10
049223-11
__
687117-03
687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 15.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 15.
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
Requires 2 for single and 4 for double.

10

To Contents Page

21-1/4"
10,000
psi
Model II
__
615369-01
615418-01
041357
644240-()
041356
41374**
030274-11
041365-11**
030308-08
041085
__

26-3/4"
3000
psi
Model II
__
__
038327
038326
044260-()
614376-01
__
030274-05
__
030308-05
034233
__

041064
041065
030273-11
030312-21
041366-21
005919-38-10
__

038174
038324
030273-05
030312-13
__

2709000-18-01
M517988
005940-09
005930-05-10
012469-70
018586-18
011741-58
021793-39
046613-09
030313-07
702645-47-01
30101-88-13-85
710544
212741-36-00-01
702645-34-51
702645-34-31
031423-52-13-85
702645-44-01
702645-44-21
702645-43-11
702645-24-81
702585-36-00-93
017454-08
017454-09
011849-01
007650-25
002353-46
033186-92
049223-08
__

2709000-14-01
M517988
005940-09
005930-05-10
012469-24
018586-01
212741-36-00-01
__

219065-14-06-01
__

046613-08
030313-05
702645-45-51
018492-90
710538
212741-34-00-01
702645-33-71
702645-34-41
702645-34-91
702645-43-91
702645-44-11
702645-42-91
702645-23-91
702585-31-00-70
017454-08
017454-09
011849-01
007650-25
689523-01
018572-85
049223-10
__

U BOP Pipe Rams


Pipe rams are available for use in Cameron U BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts on
this page and the next page. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.
All Cameron pipe rams are suitable for H 2S service per NACE MR-01-75.

Top Seal

CAMRAM top seals are standard for all U BOP pipe rams from 7-1/16
through 18-3/4 sizes (For U and UII BOPs through 18-3/4," part numbers
beginning with 644XXX indicate the CAMRAM lipped plate design. Other part
numbers may use the standard elastomer material and reinforced plates. Verify
this with your Cameron representative).

SD-10825

Packer

CAMRAM 350 packers and top seals are available for high temperature
service and for service in which concentrations of H 2S are expected.

U BOP Pipe Ram

Ram

U BOP Pipe Ram Part Numbers


Pipe
Size

7-1/16" U BOP
3000, 5000, 10,000, and 15,000 psi WP
Top Seal 644214-01-00-01
Assembly

Ram

Packer

644500-01-00-02 644215-01-00-01

11" U BOP
3000, 5000 and 10,000 psi WP
Top Seal 644217-01-00-01

11" U BOP
15,000 psi WP
Top Seal 2010453-01

13-5/8" U BOP
3000, 5000 and 10,000 psi WP
Top Seal 644223-01-00-01

Assembly

Ram

Packer

Assembly

Ram

Packer

Assembly

644219-01

044118-01

644218-01-00-01

644222-01

044121-01

644221-02

644225-01

Ram

Packer

044118-07

019243-08

644225-02

044148-06

644224-02

Blind

644504-01

1.050"

644504-02

644501-01

644215-02

1.315"

644504-03

644501-02

644215-03

044233-25

1.660"

644504-04

644501-03

644215-04

44233-02

044118-02

019243-06

644222-02

044121-02

644221-02

644225-03

044148-05

644224-03

1.900"

644504-05

644501-04

644215-05-00-01

044233-03

044118-03

019243-05

644222-03

044121-03

644221-03

644225-04

044148-07

644224-04

2.062"

644504-06

644501-05

644215-06

044233-04

044118-04

019243-04

644222-04

044121-04

644221-04

644225-05

044148-03

644224-05

2.375"

644504-07

644501-06

644215-07-00-01

644219-06

044118-05

644218-06-00-01

644222-05

044121-05

2010454-05*

644225-06

2.875"

644504-08

644501-07

644215-08-00-01

644219-07

044118-06

644218-07-00-01

644222-06

044121-06

2010454-06*

644225-07

3.500"

644504-09

644502-01-00-01 644215-09-00-01

644219-08

644835-01-00-02 644218-08-00-01

644222-07

644753-01

2010454-07*

644225-08

4.000"

644216-11

644503-02

644215-11-00-01

644219-10

044119-02

644218-10

044234-10

044122-04

690808-09

644225-10

44149-02

644224-10-00-01

4.500"

644216-12

644503-03

644215-12-00-01

644219-11

644835-02

644218-11-00-01

644222-09

644753-02

2010454-09*

644225-11

644738-02

644224-11-00-01

044119-04

019374-04

4.750"

044233-12

5.000"

644216-14

644503-05

644215-14-00-01

644219-14

5.500"

644216-15

644503-06

644215-15-00-01

644219-16

044120-01

5.750'

044233-23

044120-10

6.000"

044233-16

6.625"

7.000"

7.625"

7.750"

8.625"

044147-01-00-01 644224-01-00-01

44148-01-00-01 644224-06-00-01
044148-02

644224-07-00-01

644738-01-00-01 644224-08-00-01

644225-13

044150-01

644224-13

644222-10

644753-03

2010454-10*

644225-14

644738-03

644224-14-00-01

644218-16

044234-13

044123-01

2010454-01

644225-16

044150-03

644224-16-00-01

644218-17

044120-02

644218-18

044234-14

044123-02

690808-13

044244-13

044150-04

031215-09

044233-17

644835-04

644218-19-00-01

044234-15

044123-03

690808-14

644225-18

644738-04-00-02 644224-18-00-01

044233-18

044120-04

644218-20-00-01

044234-16

044124-01

2010454-14

644225-19

044151-01-00-01 644224-19-00-01

044233-19

044120-05

644218-21-00-01

044234-17

044124-02

690808-16

044244-15

044151-02

644224-20

044233-22

044120-09

644218-22

044244-25

044151-06

019506-09

044233-20

044120-06

644218-23

044244-16

044151-03

644224-22

9.000"

044244-24

044151-04

019506-06

9.625"

644225-24

10.750"

044244-18

044152-01

644224-25

11.750"

044244-26

614208-01

644224-26

3.500" Aluminum

644216-10

644503-01

644215-10

044233-08

044119-06

644218-09

044244-20

044149-04

031215-16

4.500" Aluminum

644216-13

644503-04

644215-13

044233-11

044119-07

644218-12

044244-10

044149-05

031215-17

5.000" Aluminum

44233-24

44119-08

644218-15

44244-32

44150-08

31215-27

644835-03-00-01 644218-14-00-01

11

To Contents Page

044151-05-00-01 644224-24-00-01

Part Numbers for U BOP Pipe Rams


Pipe
Size

Blind
1.050"
1.315"
1.660"
1.900"
2.062"
2.375"
2.875"
3.500"
4.000"
4.500"
4.750"
5.000"
5.500"
5.750'
6.000"
6.625"
7.000"
7.625"
7.750"
8.625"
9.000"
9.625"
10.750"
11.750"
13.375"
13.625"
13.750"
16.000"
3.500" Aluminum
4.500" Aluminum
5.000" Aluminum

13-5/8" U BOP
15,000 psi
Top Seal 644226-01
Assembly
Ram

044143-01
__
__
__
__

644227-01
__
__
__
__

044243-02
644228-03
644228-04
644228-05
644228-07
644228-08
044243-10
644228-11
044243-12
__

044144-03
044144-01
044144-02
644739-01
044144-06
644739-02
044145-01
644739-03
044145-03
__

040910-20
644227-03
644227-04
644227-05
644227-07
644227-08
040910-07
644227-11-00-01
040910-08
__

044243-14
044243-15
044243-16
044243-17
044243-22
044243-18
044243-19
044243-20
044243-21
__
__
__
__
__

044145-04
644739-04
044146-01
044146-02
044146-07
044146-03
044146-04
044146-05
044146-06
__
__
__
__
__

040910-09
644227-14
644227-15
644227-16
644227-17
040910-13
040910-14
644227-20
644227-21
__
__
__
__
__

044243-06
044243-08
__

044144-05
044144-08
__

040910-16
040910-05
__

644231-01
__
__
__

044179-01
__
__
__

644231-02
__

044180-03
__

644231-03
644231-04
644231-05
644231-06
644231-07
644231-08
644231-09
644231-10
__

044180-01
044180-02
644740-01
044181-02
644740-02
044181-04
644740-03
044181-06
__

644231-11
644231-12
644231-13
644231-14
__
644231-15
644231-16
644231-17
644231-18
644231-19
644231-20
__
__
__
__
__
__

644230-01
__
__
__

18-3/4" U BOP
10,000 psi
Top Seal 644232-01-00-01
Assembly
Ram
Packer

644234-01
__
__
__
__
__

044184-01
__
__
__
__
__

644233-01
__
__
__
__
__

644230-03
644230-04
644230-05
644230-06
644230-07
644230-08
644230-09
644230-10
__

044254-02
044254-03
644234-04
044254-06
044254-07
044254-09
644234-10
044254-11
__

044185-01
044185-02
644741-01
044185-05
644741-02
044185-08
644741-03
044185-10
__

644233-02
644233-03

049291-01
049291-02
049291-03
049291-04
__

644230-11
644230-12
644230-13
644230-14
__

044254-13
044254-14
044254-15
044254-16
__

044185-12
044185-13
044185-14
044185-15
__

041856-09
644233-13
644233-14
041856-12
__

049291-06
049291-07
049292-01
049292-02
049292-03
049292-04
__
__
__
__
__
__

644230-15
644230-16
644230-17
644230-18
644230-19
644230-20
__
__
__
__
__
__

044254-17
044254-18
044254-19
044254-21
__

044185-16
044185-17
044185-18
044185-21
__

041856-13
041856-14
644233-18
644233-19
__

044254-22
__
__
__

044185-20
__
__
__

644233-20
__
__
__

044254-05
044254-08
__

044185-04
044185-07
__

041856-16
041856-17
__

644230-02
__

21-1/4" Bore 2000 psi


20-3/4" Bore 3000 psi
Top Seal 19514-00-00-01

Pipe Size
Assembly
Blind
1.050"
1.315"
1.660"
1.900"
2.062"
2.375"
2.875"
3.500"
4.000"
4.500"
4.750"
5.000"
5.500"
5.750'
6.000"
6.625"
7.000"
7.625"
7.750"
8.625"
9.000"
9.625"
10.750"
11.750"
13.375"
13.625"
13.750"
16.000"
18.625"
20.000"

Packer

644228-01
__
__
__
__

16-3/4" U BOP
3000, 5000 and 10,000 psi
Top Seal 644229-01-00-01
Assembly
Ram
Packer

21-1/4" U BOP
5000 and 10,000 psi
Top Seal 2010939-01
Assembly
Ram
Packer

044262-01
__
__
__
__
__

044214-01
__
__
__
__
__

2010851-19
__
__
__
__
__

044262-02
044262-03
644233-04-00-01
044262-04
644233-06
044262-06
644233-07
044262-07
041856-06
044262-09
644233-10-00-01 044262-10
644233-11
044262-11
__
__

044215-01
044215-02
644743-01
044215-05
644743-02
044215-08
644743-03
044215-10
__

2010851-01
2010851-02
040962-03
040962-04
2010851-05
040962-06
2010851-07
2010851-08
__

044262-13
044262-14
044262-15
044262-16
__

044215-12
044215-13
044215-14
044215-15
__

040962-09
2010851-10
2010851-11
040962-12
__

044262-17
044262-18
044262-19
044262-20
044262-21
044262-22
044262-24
__

044215-16
044215-17
044215-18
044216-01
044216-02
044216-03
044216-05
__

040962-13
040962-14
040962-15
040962-20
040962-21
2010851-22
040962-24
__

044262-23
044262-05
044262-08
__

44216-04
044215-04
044215-07
__

644233-20
040962-16
040962-17
__

26-3/4" Bore
2000 and 3000 psi
Top Seal 34200

Ram

Packer

Assembly

Ram

044256-01
__
__
__
__
__
__
__

044149-01
__
__
__
__
__
__
__

2163612-01
__
__
__
__
__
__
__

044260-01
__
__
__
__
__

044209-01
__
__
__
__
__

2163561-01
__
__
__
__
__

044256-02
044256-03
044256-04
044256-05
044256-06
044256-07
__

645328-01
044192-02
645328-02
044192-04
645328-03
044193-02
__

2010583-22
031228-04
2010583-05
031228-06
2010583-07
2163613-07
__

044260-02
044260-03
044260-04
044260-05
044260-06
__

614017-01
614017-02
614018-01
614018-02
614018-03
__

2163559-01
2163559-02
2163559-03
2163559-04
2163559-05
__

044260-07
044260-08
__

614018-04
614018-05
__

2163559-06
2163559-07
__

044256-08
044256-09
044256-10
044256-11
__

044193-03
645328-04
044193-05
044193-06
__

031228-09
2010583-10-01
031228-11
031228-12
__

044256-13
044256-14
044256-15
044256-16
044256-17
044256-18
044256-21
044256-19
044256-20
044256-22
__

044193-08
044193-09
044193-10
044194-01
044194-02
044194-03
044194-05
044194-04
044195-01
614459-01
__

031228-14
031228-15
031228-16
2010583-17
031228-18
2010583-04-01
031228-24
031228-19
031228-21
031228-25
__

044260-09
044260-10
044260-11
044260-12
__
__

614019-01
614019-02
614019-03
614019-04
__
__

2163559-08
2163559-09
2163559-10
2163559-01
__
__

044260-14
044260-15
044260-16
044260-17
044260-18
__
__

614019-06
614020-01
614020-02
614020-03
614020-04
__
__

2163559-13
2163559-14
2163559-15
2163559-16
2163559-17
__
__

044260-19
__

614021-01
__

2163559-18
__

044260-20

614021-02

12

To Contents Page

Packer

2163559-21

Hang-Off Weights

Hang-Off Weights
(See Cameron Engineering Bulletin 636)

Hang-off weights are estimated capacities with hardened top corners of the
hang-off rams. This enables the rams to dig into the tool joint and provide
superior hang-off capacity while still meeting NACE requirements.
For variable bore rams (VBRs) and FLEXPACKER rams, hang-off data refer
to Cameron Engineering Bulletin 859D.

Pipe Size
3-1/2"
4-1/2"
5"
5-1/2"
6-5/8"

Pipe Rams
425,000 lbs
550,000 lbs
600,000 lbs
600,000 lbs
600,000 lbs

U BOP Shearing Blind Rams


The single-piece body incorporates an integrated cutting edge.
CAMRAM top seals are standard for all U BOP shearing blind rams
through 18-3/4".
For U and UII BOPs through 18-3/4," part numbers beginning with 644XXX
indicate the CAMRAM lipped-plate design. Other part numbers may use
standard elastomer material and reinforced plates. Verify this with your
Cameron representative.
H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service.
The Cameron shearing blind ram has a single-piece body with an integrated
cutting edge.

Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
The DS shearing blind ram can cut larger diameter tubulars or multiple
tubing strings regardless of their orientation to the centerline of the ram. A blade
seal between the upper and lower faces eliminates the need for moving pipe
after shearing.
Features include of shearing blind rams and DS rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.

11

13

10

12

15

10

2
1

2
4
SD-9348

4
4
11

14

3
7

SD-10815

SD-10827

DS Shearing Blind Ram


6

U BOP H2S Shearing Blind Ram

U BOP Shearing Blind Ram

U BOP H2S Shearing Blind Ram Part Numbers


BOP Bore Size and
Working Pressure
(psi)

1
Upper Ram
Subassy.

2
Ram

13-5/8" 5000 and 10,000

644781-01

18-3/4" 10,000

2010186-01 2010187-01

3
Blade
Packer

4
Packer

5
Packer

6
Top
Seal

7
Blade
Insert

8
Set
Screw

644780-01 644435-01-00-01 046751-01-00-01 046752-01-00-01 644223-01-00-01 644581-01-00-01 644582-01


2010192-01

2010191-01

2010190-01

2010193-01

2010182-01

644524-01

Part number 15 for both sizes is 200231.

13

To Contents Page

9
Lower Ram
Subassy.

10
Ram

11
Packer

12
Packer

13
Top
Seal

14
Blade
Insert

644781-02

644780-02 046751-01-00-01 046752-01-00-01 644223-01-00-01 644581-02-00-01

2010186-02

2010188-01

2010191-01

2010190-01

2010193-01

2010183-01

U BOP DS Shearing Blind Ram


(See page 13 for item number reference)
BOP Bore Size and
Working Pressure
11" 5000 and 10,000 psi

1
Upper Ram
Subassy.

2*
Body

Description and Item Number


4*
5*
6*
Side
Blade
Blade
Packer
Seal
Seal

3*
Side
Packer

7
Lower Ram
Subassy.

8**
Body

9**
Side
Packer

10**
Side
Packer

11
Top Seal
(2 Required)

645078-01-00-01 645079-01-00-01 645080-02-00-01 645080-01-00-01 645031-02-00-01 645031-02-00-01 645078-02-00-01 645079-02-00-01 645080-02-00-01 645080-01-00-01 644217-02-00-01

13-5/8" 5000 and 10,000 psi 645026-01-00-01 645027-01-00-01

2010985-01

2010985-02

2010986-01

2010986-02

645026-02-00-01 645027-02-00-01

20101985-01

2010985-02

6445033-01-00-01

*Part of Upper Ram Subassembly. Item 6 not shown.

U BOP Shearing Blind Ram Part Numbers


(See page 13 for item number reference)
Description and Item Number
BOP Bore Size and
Working Pressure

1
Upper Ram
Subassy.

2
Body*

3
Blade
Packer*

4
Side
Packer*

5
Side
Packer*

7-1/16" 5000, 10,000, 15,000

046792-01-00-03 645079-01-00-01

11" 5000, 10,000 psi

049392-01-00-02 049009-01-00-02

2010462-04

2020460-07

2010461-07

2020462-04

2010460-07

2040461-07

11" 15,000 psi

614297-01

13-5/8" 5000, 10,000 psi

046748-01

13-5/8" 15,000 psi

614004-01

16-3/4" 5000 psi

614275-01

049358-01-00-03 049358-02-00-03

046-49-01-00-02 064435-01-00-01 046751-01-00-02 046750-01-00-02


2010291-01

046910-01

046751-05

046752-05

046766-01-00-01 049006-01-00-01 046910-03-00-01 046751-03-00-01 046752-03-00-01


046751-03-00-01 046752-03-00-01

6
Lower Ram
Subassy.**

7
Body

046792-02

8
Side
Packer

046212-01-00-04 049347-01-00-02

049392-02-00-02 049010-01-00-02

9
Side
Packer

10
Top Seal
(2 Required)

644217-02-00-01

2010461-07

2010460-07

2040453-01

2010460-07

2010461-07

2010453-01

614297-02

614274-01

046748-02

046750-01

614004-02

614003-01

046766-02

049007-01

046751-03-00-01 046752-03-00-01 644229-01-00-01


046751-03-00-01 046752-03-00-01 644229-01-00-01

046751-01-00-02 046752-01-00-02 644223-01-00-01


046751-05

046752-05

644226-01-00-01

16-3/4" 10,000 psi

046773-01

046774-01-00-01

046910-03

046773-02

046775-01

18-3/4" 10,000 psi

046776-01

046777-01-00-01

046910-02

2010191-01

2010190-01

046776-02

046778-01-00-01

20-3/4" 3000 psi

046783-01

046784-01

061535-01-00-01

046783-02

046785-01

061547-01-00-01 615247-02-00-01 019514-00-00-01

21-1/4" 2000 psi

046783-01

046784-01

061535-01-00-01

046783-02

046785-01

061547-01-00-01 615247-02-00-01 019514-00-00-01

21-1/4" 5000 psi

049983-01

049981-01

046910-05-00-01

046751-06

046752-06

046683-02

046682-01

046751-06

046752-06

645478-01

21-1/4" 7500,10,000 psi

046788-01

049012-01

046910-05-00-01

046751-06

046752-06

046788-02

049011-01

046751-06

046752-06

645478-01

2010191-01

2010190-01

6441232-02

*Part of Upper Ram Subassembly.

Drill Pipe Shearing Requirements


The minimum shearing configurations needed for each size U BOP to meet
the requirements of the proposed second edition of API 16A are listed in the
following chart. Each shearing configuration is capable of shearing the

corresponding pipe at a closing pressure equal to or less than 2800 psi. For
further information on shearing requirements for different pipe sizes and
grades, contact your Cameron representative.

Minimum Shearing Configurations for the U BOP


API Designated
Size
7-1/16"
11"
11"
11"
13-5/8"
13-5/8"
13-5/8"
16-3/4"
18-3/4"
20-3/4"
21-1/4"
21-1/4"

Ram
Type
SBR
SBR
DS
SBR
SBR
DS
SBR
SBR
SBR
SBR
SBR
SBR

Pressure
Rating (psi)
All
10,000 and Lower
10,000 and Lower
15,000 and Higher
10,000 and Lower
10,000 and Lower
15,000 and Higher
All
All
3000 and Lower
3000 and Lower
5000 and Higher

Pipe
OD (In.)
3-1/2
5
5
5
5
5
5
5
5
5
5
5

Pipe
Lb/Ft
13.3
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5

Note: See page 15 for a complete list of part numbers for the large bore shear bonnets and tandem boosters.

14

To Contents Page

Pipe
Grade
S
E
E
G
G
G
S
S
S
G
G
S

Shearing
Configuration
Shear Bonnets with Tandem Boosters
Shear Bonnets with Tandem Boosters
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Shear Bonnets with Tandem Boosters
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Standard Bonnets
Shear Bonnets with Tandem Boosters
Shear Bonnets with Tandem Boosters
Standard Bonnets

Large Bore Shear Bonnets

SD-10816

12A**
2A
24A
26A
5A

42A

Large Bore Shear Bonnet Assembly


(See pages 8, 9 and 10 for items not called out on this drawing.)

Large Bore Shear Bonnet Part Numbers


Item
No.

11"
3000
psi
Model II

Description
(2 Required per Cavity)

11"
5000
psi
Model II

11"
10,000
psi
Model II

11"
15,000
psi
Model 79

13-5/8"
3000
psi
Model 11

13-5/8"
5000
psi
Model II

13-5/8"
10,000
psi
Model II

13-5/8"
15,000
psi
Model B

16-3/4"
5000
psi
Model B

16-3/4"
10,000
psi
Model II

20-3/4"
3000
psi
Model II

21-1/4"
2000
psi
Model II

Bonnet Assembly (Right)

615195-01

615194-01-00-01

614596-01

615419-01

615196-01

615191-01

614498-01

615540-01

615530-01

615537-01

615526-01

615525-01

Bonnet Assembly (Left)

615195-02

615194-02-00-01

614596-02

615419-02

615196-02

615191-02-00-01

614498-02

615540-02

615530-02

615537-02

615526-02

615525-02

2A

Intermediate Flange/Shear

615188-01 615188-01 615188-01

615459-01

615192-01

615192-01

614766-01

615538-01

615528-01

615535-01

615523-01

615523-01

3A

Bonnet/Shear

615189-03 615189-02 615189-01

615640-01

615143-02

615143-01

614772-01

615448-01

615527-01

615534-01

615522-01

615522-02

5A

Operating Piston/Shear

645249-01 645249-01 645249-01

615457-01

615209-01

615209-01

614760-01

615539-01

615529-01

615536-01

615524-01

615524-01

70264045-81

70264045-81

70264045-81

70264045-81

70264546-51

70264546-51

70264546-51

70264045-81

70264045-81

24A

O-Ring, Int Flg to Bonnet Lip

26A Lip Seal, Operating Piston/Shear

70264545-51

70264545-51

70264545-51

710586

710586

710586

42A Wear Ring, Operating Piston/Shear 049223-15 049223-15 049223-15

710542

710542

710542

710542

710588

710588

710588

710542

710542

049223-04

049223-04

049223-04

049223-04

049223-17

049223-17

049223-17

049223-14

049223-14

*Two shear bonnet assemblies, one right and one left, are required per cavity. The shear bonnet assembly consists of all items shown on the illustration.
**See pages 8, 9 and 10 for bonnet bolt part numbers.
7

10

17

23

13

11

15

16

SD-10803-99

5
6
1

12

14

Tandem Booster Exploded View

Tandem Booster Part Numbers

Tandem Boosters for U BOPs


A BOP equipped with tandem boosters can
deliver increased shearing force while not
increasing the wear and tear on the packers.
Tandem boosters approximately double the force
available to shear pipe. Since the tailrod of the
tandem booster has the same stroke as the BOP's
operating piston, the standard shear locking
mechanism can be installed on the outside end of
the booster. For information on lock screws and
the required spacers, see pages 8, 9 and 10.
For information concerning applications where
a tandem booster is required, consult your
Cameron representative.

Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
27

7-1/16"
11"
11" 15,000 psi
Description
3000, 5000
3000, 5000
13-5/8" 3000, 5000
10,000 and 15,000 psi*
5,000 and 10,000 psi
and 10,000 psi
Qty Part No.
Qty Part No.
Qty Part No.
Cylinder
1 644959-01
2 645113-01
2 645113-03
Cylinder Head
1 644960-01
2 645171-01
2 645171-03
Piston
1 644961-01
2 2032370-02
2 645172-03
Tailrod
1 644962-01
2 645173-01
2 645173-03
Adapter Plate
1 644963-01
2 645115-01
2 645115-03
Screw, SDC HD Cap
8 018541-34
16 018542-13
16 018542-14
O-Ring
1 702640-24-91
2 702645-36-11
2 702645-37-11
Seal Ring
1 710541
2 712352
2 710538
Wear Ring, Oper. Piston 1 049223-03
2 049223-21
2 049223-01
Filter, Muffler
1 710621
2 710621
2 710417
Seal, Lip
1 011741-32
2 212741-33-00-01
2 212741-34-00-01
Seal Ring
1 710620
2 712351
2 710419
Wear Ring, Cylinder
1 644443-02
2 644443-03
2 645215-01
Seal Ring
1 705955
2 712445
2 710418
O-Ring
1 702640-33-11
2 702645-33-51
2 702645-33-71
Alignment Ring
1 645116-02
2 645116-01
2 645116-03
__
Pipe Plug
1
2 201018
2 005930-05-10
__
Connector, Tubing
1 019624-01
2
4 204887-10-06-57
Cross
1 006347-08
1 675029-52
1 675029-23
__
Nipple, Pipe Reg.
2
1 685902-07-00-30
1 685902-07-00-30
Hose Assembly
2 711010
2 2708021
2 711374
__
Connector, Tubing
1 204888-08-05-56
2 204887-10-05-56
__
__
Stud, Double End
16 219065-12-05-01
__
Connector, Tubing
1 501133-71-22
2 204887-10-06-56
__
__
Adapter, Pipe
2 675029-01
Repair Kits
- 2164148-01
- 2164148-03
2164148-02

*The 7-1/16" tandem booster is a part of the standard land and platform shear configuration for 7-1/16" U BOPs.

15

To Contents Page

20-3/4" 3000 psi


and
21-1/4" 2000 psi
Qty Part No.
2 645113-04
2 645171-03
2 645172-03
2 645173-04
2 645115-03
16 018542-14
2 702645-37-11
2 710538
2 049223-01
2 710417
2 212741-34-00-01
2 710419
2 645215-01
2 710418
2 702645-33-71
2 645116-03
2 005930-05-10
4 204887-10-06-57
2 675029-23
1 685902-07-00-30
2 711374
__
__
__
- 2164148-02

U BOP DSI and DVS Shear Rams


DVS rams are similar in design to the standard shearing blind rams except
that both blades are V shaped and interlocked. The DVS rams are capable of
shearing tubing, small pipe , braided cable and slickline.

Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are
also available for the U BOP. The interlocking feature of these rams provides the
capability of shearing wireline and braided cable with zero tension in the line,
while still maintaining a seal. The blades are interlocked by using pockets in the
lower ram and arms on the upper ram to prevent any gap between blade surfaces.
DSI rams are similar to standard DS shear rams except for the interlock
feature. DSI shear rams are capable of shearing tubing, small pipe, braided
cable, slickline and solid sinker bar.
Top Seal

Top Seal

Upper Ram Body

Upper Ram Body

Side Packer
Upper Shear Ram
SD11318-99

SD11320-99

Lower Ram Body


Lower Ram Body

Blade Seal
Upper Shear Ram

Side Packer
Lower Shear Ram

Blade Packer
Side Packer

Dual String Interlocking (DSI) Shear Rams

Double V Shear (DVS) Shear Rams

VBR Packer

Top Seal

U BOP Variable Bore Rams (VBR and VBR-II)


The Cameron VBR-II is the next generation of the highly popular Cameron
variable bore ram (VBR) packer. The patent pending VBR-II accommodates a
range of pipe sizes and may be used in existing Cameron variable bore rams.
The VBR-II seals on a range of drill pipe sizes as well as hexagonal kellys and
provides uniform sealing pressure with virtual elimination of extrusion paths.
As indicated in the chart below, the VBR-II is the standard VBR in most common
sizes. In sizes where the VBR-II is not specified in the chart, the popular
Cameron VBR is the standard offering. VBR-II packers for other size BOPs and
other pipe size ranges are available upon request.

SD-5129

U BOP Variable Bore Ram

U BOP Variable Bore Ram Part Numbers


BOP Size and
Working Pressure

Pipe Size
Range

Ram
Subassembly

Ram
Body

Packer

Top
Seal

7-1/16" 3000,5000,10,000 and 15,000 psi

3-1/2" to 2-3/8"

615066-01

615065-01

614616-02

644214-02-00-01

7-1/16" 3000,5000,10,000 and 15,000 psi

4" to 2-7/8

644901-01

614605-01

614616-02

644214-02-00-01

11" 3000, 5000 and 10,000 psi VBR-II

5" to 3-1/2"

645360-01

644836-01

644926-02

644217-01-00-01

11" 15,000 psi

5" to 2-7/8"

614456-01

644754-01

644931-01

2010453-02

13-5/8" 3000, 5000 and 10,000 psi VBR-II

7" to 4-1/2"

046675-01

046671-01

644924-03

644223-02-00-01

13-5/8" 3000, 5000 and 10,000 psi VBR-II

5-1/2" to 3-1/2"

2163945-01

2011438-01

645089-02-00-01

644223-02-00-01

13-5/8" 3000, 5000 and 10,000 psi VBR-II

5" to 2-7/8"

645166-01

644744-01

645089-02-00-01

644223-02-00-01

13-5/8" 15,000 psi

7" to 5"

614104-01

614146-01

644924-02

644226-02-00-01

13-5/8" 15,000 psi

5" to 3-1/2"

614129-01

644745-01

644921-01

644226-02-00-01

16-3/4" 5000

7" to 3-1/2"

046676-01

046672-01

644920-01-00-01

644229-01-00-01

16-3/4" 10,000 psi

5" to 2-7/8"

2163175-01

644746-01-00-01

645128-01-00-01

644229-01-00-01

16-3/4" 10,000 psi


18-3/4" 10,000 psi VBR-II

7" to 5"
7-5/8" to 3-1/2"

046676-01
046677-01

046672-01
046673-01

644920-01-00-01
644927-02

644229-01-00-01
644232-03-00-01

16

To Contents Page

FLEXPACKER and FLEXPACKER-NRs

Inserted Packers

The Cameron FLEXPACKER ram is the latest development in multiple-bore


sealing. Each FLEXPACKER ram is designed to close and seal around several
diameters of tubing and pipe. The Cameron FLEXPACKER-NR is a narrow
range variable bore ram packer designed for use with tapered drill strings.
These packers can be used in existing Cameron BOPs.

The Cameron Inserted Packer for stripping/snubbing service is designed


with a field replaceable, wear-resistant non-rotating insert block. The insert
block is fabricated from a specially formulated ultra-high molecular weight
polyethylene (UHMW-PE) which extends service life. The insert block is
designed to be self-locking in the packer and should not require screws or other
fasteners to hold it in place. The Cameron design eliminates the major causes
of failure for inserted packers using semicircular inserts held in place with
screws, including rapid insert wear out and insert rotation resulting in
permanent packer damage.

FLEXPACKER Sizes and Part Numbers


BOP Size and
Working Pressure
11" 3000, 5000 and 10,000 psi

Pipe Size
Range

Packer
Part No.

Top Seal
Part No.
644217-01-00-01

2-3/8" to 3-1/2"

2010123-01

13-5/8" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2"

2010113-01

644223-01-00-01

18-3/4" 10,000 psi

2-7/8" to 5"

645346-01

644232-04

20-3/4" 3000 psi

5" to 7"

645353-01

019514-00-00-01

21-1/4" 2000 psi

5" to 7"

645353-01

019514-00-00-01

Inserted Packer Sizes and Part Numbers


BOP Size

FLEXPACKER-NR Sizes and Part Numbers


Pipe Size Range

Part Number

11 3000, 5000, and 10,000 psi WP, Type U

BOP Size and Working Pressure

2-3/8 x 3-1/2

2011740-01

11 3000, 5000, and 10,000 psi WP, Type U


13-5/8 3000, 5000 and 10,000 psi WP, Type U
13-5/8 3000, 5000 and 10,000 psi WP, Type U

3-1/2 x 5
2-3/8 x 3-1/2
3-1/2 x 5

2163445-01
2011716-01
2011673-01

13-5/8 3000, 5000 and 10,000 psi WP, Type U


18-3/4 10,000 psi WP, Type U
18-3/4 10,000 psi WP, Type U

5 x 6-5/8
5 x 6-5/8
3-1/2 x 5

2011688-01
2011907-01
2011701-01

Pipe Size

Packer Assy.
Part Number

Insert
Part Number

Modified Packer
Part Number

7-1/16 15,000 psi WP

2-3/8

2010833-04

2010771-04

2010813-04

7-1/16 15,000 psi WP


7-1/16 15,000 psi WP
7-1/16 15,000 psi WP
11 10,000 psi WP
11 10,000 psi WP
11 10,000 psi WP
11 10,000 psi WP
11 10,000 psi WP

2-7/8
3-1/2
4-1/2
2-3/8
2-7/8
3-1/2
4-1/2
5

2010833-05
2010833-06
2010833-07
2010952-01
2010952-02
2010952-03
2010952-04
2010952-05

2010771-05
2010771-06
2010771-07
2010938-01
2010938-02
2010938-03
2010938-04
2010938-05

2010813-05
2010813-06
2010813-07
2010937-01
2010937-02
2010937-03
2010937-04
2010937-05

SD-10315

SD-016611

FLEXPACKER

SD-24364

FLEXPACKER-NR

Inserted Packer

CAMRAM 350 Packers and Top Seals for U BOPs


CAMRAM packers in drill pipe sizes feature the Cameron patented lipped
CAMRAM 350 U BOP pipe ram packers and top seals are available for
plate design. All packers also have chamfered ends on the top and bottom
applications which require high temperature capabilities and greater H2S
reinforcing plates to prevent ram bore scoring and reduce elastomer extrusion.
resistance than standard CAMRAM packers and top seals.
All packers and top seals are molded using CAMLAST high performance
CAMRAM 350 is available in all U BOP sizes in which standard CAMRAM
elastomer from Cameron Elastomer Technology.
packers and top seals are offered. At present, only pipe sizes (up to 6-5/8") are
manufactured.
U BOP CAMRAM 350 Part Numbers
Pipe Size
(In.)

7-1/16"
3000-15,000 psi
Top Seal:
644701-01

11"
3000-10,000 psi
Top Seal:
644703-01

11"
15,000 psi
Top Seal:
644705-01

13-5/8"
3000-10,000 psi
Top Seal:
644707-01

13-5/8"
15,000 psi
Top Seal:
644709-01

16-3/4"
3000-10,000 psi
Top Seal:
644711-01

18-3/4"
10,000 psi
Top Seal:
644713-01

20-3/4", 3000 psi


21-1/4", 2000 psi
Top Seal:
2164113-01

Packer

Packer

Packer

Packer

Packer

Packer

Packer

Packer

Blind

644700-01

644702-01

644704-01

644706-01

644708-01

644710-01

644712-01

2164105-01

2.375

644700-07

644702-06

644704-05

644706-06

644708-03

2.875

644700-08

644702-07

644704-06

644706-07

644708-04

644710-04

3.500

644700-09

644702-08

644706-08

644708-05

644710-05

644712-04

2164105-04

4.000

644702-10

644706-10

644708-07

644710-06

4.500

644702-11

644704-09

644706-11

644710-07

5.000

644702-14

644704-10

644706-14

644708-11

644710-09

644712-10

2164105-07

5.500

644702-16

644706-16

2164105-08

5.875

2164105-09

13.375

2164105-17

Note: 20" and 26" packers are "severe service" and are technically not CAMRAM 350. They do not incorporate the lipped plate design.

17

To Contents Page

Bonnet Rebuild Softgoods Kits

Kit Part Numbers

For popular size U BOPs, a bonnet rebuild softgoods kit is available to


provide all parts required to reseal the operating system.
Kit parts are shrink-film packed to prevent loss and assure long shelf life.
The kits are less expensive than individual parts. All parts in each kit are
identified with part numbers and parts list index numbers.

BOP Size
7-1/16"

Pressure Rating/Bonnet Type


3000, 5000, 10,000 and 15,000 psi All

11"

3000, 5000 and 10,000 psi Pipe

644909-02

11

15,000 All

644831-08

Kit Part Number*


644909-01

13-5/8"

3000, 5000 and 10,000 psi Pipe

644909-03

13-5/8

15,000 All

644831-12

16-3/4"

5000 psi Pipe

644831-14

16-3/4"

10,000 psi All

644831-15

18-3/4"

10,000 psi All

644909-04

20-3/4"

3000 psi Pipe

644831-17

21-1/4"
21-1/4"

2000 psi Pipe


5000 psi All

644831-18
644831-19

21-1/4"

10,000 psi Pipe

644831-21

26-3/4"

3000 psi All

644831-22

*1 kit contains softgoods for 1 bonnet.

18
24

26

42

19

34
SD-5287

25
32
28

27

33

31

21

20

U BOP Bonnet Softgoods Components

30

29

U BOP Bonnet Rebuild Softgoods Kit Components


(Available for 7-1/16" 3000, 5000, 10,000 and 15,000 psi: 11" 3000, 5000 and 10,000 psi; and 13-5/8" 3000, 5000 and 10,000 psi U BOPs.)
Item Number*

Description

Item Number*

Description

18

Ring, Plastic Packing

29

O-Ring, Ram Change Piston to Body

19

Ring, Plastic Energizing

30

O-Ring, Ram Change Piston Rod to Intermediate Flange

20

Seal Ring, Connecting Rod

31

O-Ring, Ram Change Cylinder to Intermediate Flange

21

Ring, Backup

32

O-Ring, Ram Change Piston to Bonnet

24

O-Ring, Operating Cylinder

33

O-Ring, Ram Change Piston

25

O-Ring, Operating Piston Rod to Intermediate Flange

34

O-Ring, Bonnet Bolt Retainer

26

Lip Seal, Operating Piston

39

Packing, Plastic**

27

Seal Ring, Tail Rod

42

Wear Ring, Operating Piston

28

O-Ring, Wiping

*Item numbers are the same as exploded view shown above.


**Not shown on illustration.

18

To Contents Page

Hydraulic Bonnet Bolt System

Bonnet Bolt and Tensioner Part Numbers


BOP Size and
Working pressure (psi)

The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads
and reduces the time required for making up and breaking out bonnet bolts.
The hydraulic bonnet bolt is completely interchangeable with conventional
bonnet bolts. It has a standard hexagonal head. An additional external
thread mates with the internal threads in the operating head of the hydraulic
bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod
permanently secured in the machined hole in the center of the bolt.
The hydraulic bonnet bolt tensioner consists of a compact tensioner unit
with a remote pump.

Bonnet
Bolt

Compact
Tensioner Unit

11" 15,000 All

049795-13-10

614644-13-10*

13-5/8" 5000 Pipe Ram

049795-13-05

614644-13-05*

13-5/8" 5000 Shear Ram

049917-13-05

614644-13-05*

13-5/8" 10,000 Pipe Ram

049795-13-10

614644-13-10

13-5/8" 10,000 Shear Ram

049917-13-10

614644-13-10*

13-5/8" 15,000 All

049795-13-15

614644-16-10**

16-3/4" 5000 Pipe Ram

049795-16-05

614644-16-05*

16-3/4" 5000 Shear Ram

049917-16-05

614644-16-05

16-3/4" 10,000 All

049795-16-10

614644-16-10**

18-3/4" 10,000 All

049795-18-10

614644-18-10**

21-1/4" 5000 All

049795-21-05

614644-18-10**

*Use 25,000 psi WP pump, part number 645035-01.


**Use 30,000 psi WP pump, part number 645035-02.

Bonnet Seals and Connecting Rod Seals

U BOP CAMLAST Bonnet and Connecting Rod Seals


BOP
Size

For applications where only bonnet and/or connecting rod seals are
required, Cameron offers individually packaged components. Connecting rod
seals are nitrile rubber. Bonnet seals beginning with 644197 are the newest
design.
When high temperature and/or high concentrations of H2S are expected,
Cameron recommends the used of CAMLAST bonnet and connecting rod seals
along with CAMRAM 350 packers and top seals.

Pressure Rating
(psi)

Nitrile
Bonnet Seal

CAMLAST

Conn.Rod Seal

Bonnet Seal

644573-01

645077-37

11"

3000, 5000 and 10,000

644573-02

645077-38

11"

15,000 Model 79

212741-38-00-01

644898-01

645077-38

644197-03-00-01 212741-36-00-01

644573-03

645077-36

644898-02

645077-36

644197-02-00-01 212741-38-00-01
049272-03

13-5/8" 3000, 5000 and 10,000


13-5/8" 15,000

644196-01

212741-36-00-01

16-3/4" 3000 and 5000 Model B

644197-04-00-01

212741-44

644573-04

645077-44

16-3/4" 10,000 Model II

644197-04-00-01

212741-44

644573-04

645077-44

18-3/4" 10,000

644197-05-00-01

212741-60

644573-05

645077-60

20-3/4" 3000

046613-16

212741-36-00-01

046613-26

645077-36

21-1/4" 2000

046613-16

212741-36-00-01

046613-26

645077-36

21-1/4" 5000 and 10,000 Model 79

644197-08

011741-58

21-1/4" 7500 and 10,000 Model II

644197-07

011741-58

644573-07

645077-36

26-3/4" 2000 and 3000

046613-08

212741-36-00-01

Bonnet Seal Carriers for U and U II BOPs


The bonnet seal carrier is a bore-type sealing assembly which replaces the
face seal used as the previous bonnet seal. Sealing capability is not dependent
upon bonnet bolt torque. One seal is captured in a machined bore in the BOP
body while the other seal is captured in a machined bore in the intermediate
flange.
The seal carrier was designed, developed and performance-verified for use in
newly manufactured BOPs or as a replacement seal assembly for BOPs where
either the BOP body or the intermediate flange requires weld repair on the sealing
surfaces.

SD-10860

The bonnet seal carrier can be retrofitted to any U or U II BOP.

Part Numbers for Bonnet Seal Carriers for U and U II BOPs


BOP
Size

BOP
Type

Seal Carrier
Qty.

Retainer Ring

Part No.

Conn.Rod Seal

7-1/16" 3000, 5000, 10,000 and 15,000 644197-01-00-01 212741-37-00-01

Qty.
2

Part No.

11 3000, 5000 and 10,000 psi

645464-02-00-01

13-5/8 10,000 psi

645507-01-00-01

702645-27-91

645509-01-00-01

13-5/8 15,000 psi

2010145-01

702645-27-71

2010146-01

18-3/4 10,000 psi

2010185-01

702645-28-31

2010184-01

UII

18-3/4 10,000 psi

645464-01-00-02

645485-01-00-01

645484-01-00-01

To Contents Page

Part No.

19

702645-27-61

Bonnet Seals
Qty.

645484-02-00-01

U II BOP
pressure is released. The operating system can be interlocked using
sequence caps to ensure that the wedgelock is retracted before pressure
is applied to open the BOP.
A pressure balance chamber is used with the wedgelocks to eliminate the
possibility of the wedgelock becoming unlocked due to hydrostatic
pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 23 and 24 for
rams available to fit the U II BOP.

The Cameron U II BOP takes all of the features of the U BOP and adapts them
for subsea use in the 18-3/4 10,000 and 15,000 psi WP sizes.
Like all other Cameron preventers, the rams in the U II BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually
improved by increased well bore pressure. Other features of the U II BOP
include:
Internally ported hydraulic stud tensioning system ensures that stud loading
is consistently accurate and even.
Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating

SD-10829

18-3/4" Double U II Blowout Preventer

20

To Contents Page

U II BOP Hydraulic Control System

Ram Open, Bonnet Closed

Ram Closed, Bonnet Open

SD-8630

U II BOP Operating Data and Fluid Requirements


Bore Size and
Working Pressure
18-3/4" 10,000 psi

Gallons to Open
Pipe Rams (1 Set)
22.3

Gallons to Close
Pipe Rams (1 Set)
24.7

Gallons to Open
Bonnets (1 Set)
33.7

Gallons to Close
Bonnets (1 Set)
25.2

Closing
Ratio
6.8:1

Opening
Ratio
2.5:1

Gallons to Unlock Gallons to Lock


Wedgelock
Wedgelock
5.5
0.66

18-3/4" 15,000 psi

32.3

34.7

43.9

35.2

9.3:1

3.5:1

5.5

0.66

18-3/4" 15,000 psi


with Cylinder

25.8

28.3

37.4

28.7

7.6:1

2.9:1

5.5

0.66

U II BOP Dimensions

The following designations refer to the dimensional drawing:

SD-5139

U II BOP Top View


A

F-1
F-2
G
H-1
H-2
J

E-2

Length -- bonnets closed, with wedgelocks


Length -- bonnets opened, with wedgelocks
Height -- flanged
Height -- Clamp hubs
Height -- studded x flanged
Width -- no side outlets
Centerline of preventer to outlet flange or hub face. This distance is
variable and must be determined per individual specifications.
Centerline of side outlet (outlet below rams in double) to bottom
flange face
Centerline of side outlet (outlet below rams in double) to bottom
hub face
Top of upper ram to top flange face
Top of upper ram to top hub face
Height of ram
Centerline of side outlet between rams to bottom flange face
Centerline of side outlet between rams to bottom hub face
Top of lower ram to bottom of upper ram

E-1

A-1
A-2
B-1
B-2
B-3
C
D

SD-5139

U II BOP Side View

U II Blowout Preventer Dimensions and Weights


BOP Size, Working
Pressure and Body Style

A-1
(In.)

A-2
(In.)
185.500

B-1
(In.)
__

18-3/4" 10,000 Single

147.000

18-3/4" 10,000 Double

147.000

185.500

87.125

18-3/4" 15,000 Single

148.375

186.875

18-3/4" 15,000 Double

148.375

186.875

B-2
(In.)

C
(In.)

E-1
(In.)

E-2
(In.)

F-1
(In.)

F-2
(In.)

G
(In.)

43.125

B-3
(In.)
__

42.50

20.500

13.938

22.250

15.688

11.5

74.000

__

42.50

20.500

13.938

22.250

15.688

11.5

64.750

53.125

__

47.25

23.875

18.062

26.625

20.812

98.875

87.250

84.5

47.25

23.875

18.062

26.625

20.812

21

To Contents Page

H-1
(In.)
__

H-2
(In.)
__

J
(In.)
__

Weight
(Lbs)

11.5

51.625
__

45.062
__

19.625
__

36,700

11.5

58.000

52.188

22.625

69,800

29,950
56,950

U II BOP Part Numbers


47
46

41

11

29

42

41

43

42

43

38
4

30

31
44

45

33

48

34

36

35

37

49

3a
3b

32

40

19

54

42
41

39
10

24

26

27

25

28

51

SD-7866

22
23
2
52

13

12

14

15

16

17

18
19

21

20

U II Exploded View

53

U II Blowout Preventer Part Numbers


Item
No.

Description
Description

Qty Qty
Sgl Dbl

18-3/34"
10,000 psi

18-3/4"
15,000 psi

Item
No.

Description
Description

Qty Qty
Sgl Dbl

18-3/34"
10,000 psi

18-3/4"
15,000 psi

Body, Clamped

644102-02

615239-03

29

Stud, Wedgelock

12 24

044854-12

Intermediate Flange

615303-01

30

Nut, Wedgelock

12 24

2709000-20-09

2709000-20-09

3a

Bonnet

31

Retainer Ring, Tail Rod

033186-47

033186-47

3b

Bonnet

615302-01
__

614722-03
__
614621-01

32

Seal Ring, Tail Rod

707232

707232

Piston, Operating

614623-01

33

Wear Ring, Ram Change Piston Head

614742-03

614742-03

Piston, Operating (Super Trim)

614623-05

34

O-Ring, Ram Change to Piston Body

702645-34-31

702640-34-31

Piston, Ram Change Open

614618-02

614618-02

35

O-Ring, Ram Change Cyl to Bonnet

702645-44-21

702640-44-21

Piston, Ram Change Close

614618-01

614618-01

36

O-Ring, Ram Change Cyl to Int. Flg

702645-44-01

702640-44-01

Cylinder, Ram Change

030273-16

030273-16

37

Bearing Gland, Intermediate Flange

8 16

615727-01

615727-01

Stud, Bonnet

8 16

644612-18-10

644612-18-15

38

Seal Rng, Ram Change Pst Rod to Int Flg

707233

707233

Piston, Bonnet Stud

8 16

615453-18-10

615453-18-15

39

Connector, Tubing

707159

707159

10

Seal, Bonnet Stud

8 16

615452-18-10

615452-18-15

40

Retainer Ring, Lip Seal Tailrod

614672-04

614672-04

11

Nut, Bonnet Stud

8 16

644018-18-10

615451-18-15

41

Gland, Bleeder

6 12

017454-08

017454-08

12

Pin, Ram Guide

030313-11

030313-11

42

Plug, Bleeder

6 12

017454-09

017454-09

615304-01
__

044854-12

13

Lantern Ring

615332-02

615332-02

43

Lifting Eye

011849

011849

14

Ring Retainer, Backup Ring

614672-05

614672-05

44

Seal Ring, Ram Change Piston Head

707231

707231

049223-16
__

049223-18

710545
__

710546

15

Ring, Backup

610108-15

610108-15

45

Wear Ring, Operating Piston

16

Seal Ring, Connecting Rod

710671

710671

45

Wear Ring, Operating Piston

17

Retainer Plate

615210-01

615210-01

46

Lip Seal, Operating Piston

18

Retainer Ring

041008-08-00-52 041008-08-00-52

46

Lip Seal, Operating Piston

19

Bonnet, Seal

644169-01-00-01 644169-01-00-01

47

O-Ring

* **

20

Connector, Tubing

707276

707276

48

Cylinder, Operating

21

Quick Disconnect, Male

708490-01

708490-01

48

Cylinder, Operating

030101-63-13-85 702645-47-11
__
- 030274-15
__
644613-01

22

Protective Cover

615627-01

615627-01

49

Bearing Retainer Ring, Seal

614348-10

23

Cap Screw

6 12

702500-16-00-10 702500-16-00-10

50

Plastic Packing

10 20

007650-08

007650-08

24

Screw, Plastic Packing

005940-09

005940-09

51

Ring, Seal Operating Piston

710640

710640

25

Pipe Plug, Plastic Packing

005930-05-10

005930-05-10

52

Ring, Backup

610108-28

26

Check Valve, Plastic Packing

M517988

M517988

53

Check Valve, Weep Hole

- 709493

27

Cap Screw, Int Flg to Bonnet

702585-36-00-93 702585-36-00-93

54

Wedgelock w/Pressure Bal Chamber (RH) 2

615402-01

615402-01

28

Ring, Seal Sec Conn Rod

710670

54

Wedgelock w/Pressure Bal Chamber (LH) 2

615402-02

55

O-Ring (Not Shown)

615402-02
__

32 64
4

710670

*4 required for 18-3/4" 10,000 psi BOP; 2 required for 18-3/4" 15,000 psi BOP.
**8 required for 18-3/4" 10,000 psi BOP; 4 required for 18-3/4" 15,000 psi BOP.
Alternate parts for 18-3/4 15,000 psi assembly with operating cylinder.

22

To Contents Page

049223-19
710851

614348-10

610108-28
709493

702645-46-91

U II BOP Pipe Rams


U II BOP Pipe Ram Part Numbers
Pipe rams are available for use in Cameron U II BOPs to fit all commonly
used sizes of tubing, drill pipe, drill collar or casing within the ranges in the
chart on this page. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.
Cameron U II pipe rams are suitable for H 2S service per NACE MR-01-75.
CAMRAM top seals are standard for all U II BOP pipe rams.
CAMRAM 350 packers and top seals are available for high temperature
service and for service in which concentrations of H 2S are expected.

Top Seal

18-3/4" 10,000 and 15,000 psi U II


Top Seal: 645282-01-00-01

Pipe
PipeSize
Size

Packer

Blind

Assembly
644248-01

Ram
615407-01

Packer
644247-01*

2.375"

644248-02

614770-01

644247-02*

2.875"

644248-03

614770-02

644247-03*

3.500"

644248-04

644742-01

644247-04*

3.500" Aluminum

644248-05

614770-04

644247-05

4.000"

644248-06

614770-05

644247-06

4.500"

644248-07

644742-02

644247-07

4.500" Aluminum

644248-08

614770-07

644247-08

4.750"

644248-09

614770-08

644247-09

5.000"

644248-10

644742-03

644247-10-00-01

5.500"

644248-11

614770-10

644247-11-00-01*

6.000"

644248-12

614770-12

644247-12-00-01

6.625"

644248-13

614770-13

644247-13

7.000"

644248-14

614770-14

644247-14

7.625"

644248-15

614770-15

644247-15

8.625"

644248-16

614770-16

644247-16

9.000"

644248-17

614770-17

644247-17

9.625"

644248-18

614770-18

644247-18-00-01

SD-5307

Ram Body

U II BOP Pipe Ram

CAMRAM Top Seal


CAMRAM VBR Packer

U II BOP Variable Bore Rams


One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all U II BOP variable bore
rams. The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe.

SD-5129

Ram Body

U II BOP Variable Bore Ram

U II BOP Variable Bore Ram Part Numbers


BOP Size and
Working Pressure

Pipe
Size Range

Ram
Assembly

Ram
Body

Packer
Packer

18-3/4" 10,000 psi


18-3/4" 10,000 psi
18-3/4" 15,000 psi
18-3/4" 15,000 psi

7.625" to 3.500"
5.000" to 2.875"
7.625" to 5.000"
5.000" to 3.500"

614879-01
614878-01
614879-01
614878-01

614846-01
644748-01
614846-01
644748-01

644918-01-00-01
644919-01-00-01
644918-01
644919-01

Top
Seal

645282-01-00-01
644246-02
644918-01-00-01
644919-01-00-01

Bonnet Seals and Connecting Rod Seals


Bonnet Seal and Connecting Rod Seal Part Numbers

For applications where only bonnet and/or connecting rod seals are
required, Cameron offers individually packaged components.

Temperature Range

Bonnet Seal

Connecting Rod Seal

Normal (Up to 250F)

644169-01-00-01

710671

644169-03

711871

High (Up to 350F)

23

To Contents Page

U II BOP Shearing Blind Rams


6

Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
Features include of shearing blind rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
The single-piece body incorporates an integrated cutting edge.
CAMRAM top seals are standard for all U II BOP shearing blind rams.
H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service.
The Cameron shearing blind ram has a single-piece body with an integrated
cutting edge.

1
2
7

SD-10827

U II BOP Shearing Blind Ram

U II BOP Shearing Blind Ram Assemblies


Item
Item

Description
Description
Upper Ram Assembly

2010214-01

Ram

2010216-01

Blade Packer

046910-05-00-01

Packer

615567-01-00-01

Packer

615568-01-00-01

Top Seal

645282-01-00-01

**6
7

12

18-3/4" 10,000 and


15,000 psi

10

SD-10815

Lower Ram Assembly

2010215-01

*8

Ram

2010217-01

*9

Packer

615567-01-00-01

*10

Packer

615568-01-00-01

3
5
1

11

*Part of lower ram subassembly, item 7.


**Part of upper and lower ram subassemblies, items 1 and 7.

U II BOP H2S Shearing Ram Assemblies


Item
Item

Description
Description

Upper Ram Subassembly

644759-01

Ram

644752-01

Blade Insert

644519-03

Cap Screw

644524-01

Lower Ram Subassembly

644759-02

U II BOP H2S Shearing Blind Ram

18-3/4" 10,000 and


15,000 psi

10

Ram

644752-02

11

Blade Insert

644519-02

12

Pin

200231-00

CAMRAM High Temp Shearing Blind Ram Blade and Side Packers
Item
Item

Description
Description

18-3/4" 10,000 and


15,000 psi

Blade Packer, High Temperature

644904-01

Left Side Packer, High Temperature

644905-01

Right Side Packer, High Temperature

644905-02

Top Seal, High Temperature

645246-01

Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.

CAMRAM 350 Packers and Top Seals for U II BOPs


CAMRAM 350 U II BOP pipe ram packers and top seals are available for
applications which require higher temperature capabilities than standard
CAMRAM packers and top seals.
CAMRAM 350 is available in all U II BOP sizes in which standard CAMRAM
packers and tops seals are available. At present, only pipe sizes (up to 6-5/8")
are available.
U II BOP CAMRAM 350 Part Numbers
PipeSize
Size
Pipe

CAMRAM 350
Top Seal

18-3/4" 10,000 and 15,000 psi


Top Seal 645246-01
Description

Part No.

Blind

Packer

644714-01

2.375"

Packer

644714-02

2.875"

Packer

644714-03

3.500"

Packer

644714-04

5.000"

Packer

644714-10

5.500"

Packer

644714-11

SD-7786

CAMRAM 350
Packer

U II CAMRAM 350 Packer and Top Seal

24

To Contents Page

UL and UM BOPs
The Cameron UL and UM BOPs are lightweight blowout preventers
designed for easy maintenance and long life. Both designs complement the
existing line of U preventers with interchangeable bonnets that can be installed
on any comparable size U BOP. The shearing capabilities of the UL and UM
BOP bonnets are comparable to a U BOP bonnet with tandem boosters
installed. The UL and UM both utilize an internal booster that results in a
reduced weight and length for the preventers and eliminates the need for
external plumbing. The UM now replaces the UL since the UM bonnet features
full stroke operation that allows for one-step ram removal. Other features of the
UL an UM BOPs include:
Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.

Same bonnet used for both shear and pipe rams. The internal shear booster
can be reversed to act as a stroke-limiting device.
Internal booster provides the force necessary for shearing pipe and at the
same time provides a reduced sealing force for long ram seal life.
Hydraulically operated locking mechanisms, wedgelocks are available for
subsea applications.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
The UL and UM BOPs utilize the same rams as the U BOP.
Other features include hydraulically opening bonnets, forged body and a wide
selection of rams to meet all applications.

EN
OP

SD-017936

OP

UM Blowout Preventer

40

To Contents Page

EN

UM BOP Components
3

34

42

32

33

31

23

31

35

37

30

26

22

43

34 33
29

27 28
39 20

37

35

41

38 24
46

14 12
10
25 36

11

47

51

40

SD-017936

15
17 16

19

50

18

13

UM BOP Exploded View

16 17

UM BOP Components
Item

Description

Qty.

26
Item

Nut
for Cylinder Head
Description

8
Qty.

Solid Block Body

26

Nut for Cylinder Head

Bonnet

27

Seal Ring, Tail Rod Seal

Operating Piston

28

Retainer Ring, Tail Rod Seal

Ram Change Piston, Open

29

Retaining Ring, Spirolox, Tail Rod

Ram Change Piston, Close

30

Seal Ring,Operating Piston Seal

Ram Change Cylinder

31

O-Ring, Operating Cylinder

10

Ram Guide Pin

32

O-Ring, Booster Piston Retainer

11

Retaining Ring, Spirolox, Connecting. Rod (Primary)

33

Seal Ring

12

Retaining Ring, Primary Connecting Rod Seal,

34

Wear Ring, Ram Change Piston

13

Back-Up Ring, Primary Connecting Rod Seal,

35

O-Ring, Ram Change Cylinder

14

Seal Ring, Primary Connecting Rod Seal

36

O-Ring, Ram Change Piston to Bonnet

15

Retainer Ring, Secondary Connecting Rod Seal,

37

O-Ring, Ram Change Piston to Body

16

Seal Ring, Seal for Secondary Connecting Rod

38

Stud, Lock Screw Housing

16

17

Back-up Ring for Secondary Connecting Rod Seal and


Hydraulic Seal, Connecting Rod (Secondary)

39

Nut, Lock Screw Housing

16

40

Lifting Eye, 2-1/8 Diameter

18
19

Retainer Ring for Hydraulic Connecting Rod Seal,


Retaining Ring, Spirolox

2
2

41

Booster Piston Retainer

42

Booster Piston

20

Locking Screw

43

Booster Piston Seal

22

Locking Screw Housing

46

Nameplate, Ram Type BOP, API 16A

23

Operating Cylinder

47

Nameplate, Patent - U BOP

24

Cylinder Head

25

Stud for Cylinder Head

50
51

Bonnet Bolt
Bonnet Seal, Compression Type

8
2

Note: Quantities listed are for a single ram BOP.

41

To Contents Page

Ram-Type BOPs
T BOP TL BOP

To Contents Page

T BOP
Hydraulic stud tensioning ensures that stud loading is consistently accurate
and even.
Hydraulically operated locking mechanisms, ST locks, act directly on the
operating piston tailrod and are interlocked by sequence caps to ensure that
locks are opened before the BOP is opened.
Bonnet studs instead of bonnet bolts reduce the need to make and break
threads in the BOP body.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
The standard T BOP has a large enough piston area to shear all commonly
used sizes and grades of drill pipe.
Other features include hydraulically opening bonnets, forged body and
a wide selection of rams to meet all applications. See pages 32 and 33 for
rams available to fit the T BOP.

The Cameron T blowout preventer offers a unique combination of benefits,


including safety, economy, reliability, extended service life, reduced height and
fast and easy service.
Side ram removal on the T BOP permits reduced stack height and facilitates
change-out of rams and packers. Sliding the rams to the side simplifies access
and handling and reduces vertical clearance requirements.
The T BOP is available in a modular design which greatly reduces stack
height. This design is possible because the side ram removal feature of the T
BOP allows for construction of a BOP stack with virtually no extra space
between BOP body cavities. Each BOP body or module has only a slightly
raised face and a gasket prep.
The design of the T is based on Camerons experience with the highly
successful U and U II ram-type BOPs and combines much of this proven
technology including:
Metal-to-metal bonnet gaskets increase the safety and reliability in critical
service applications.

SD-9599

18-3/4" T Blowout Preventer

25

To Contents Page

T BOP Hydraulic Control System


Ram closing pressure, shown in the red on the illustration, closes the rams.
When the bonnet nuts are released, closing pressure opens the bonnet. When
the bonnet has moved to the fully extended position, a ram removal tray is
inserted and ram opening pressure brings the rams into the clear for removal.
ST-locks are locked by applying pressure, shown in green on the illustration, to
the ST-lock lock port. This pressure wedges a piston-like assembly into position
to ensure that the rams are locked in the closed position. An option is available
where the locks are also locked automatically by installing a sequence valve in
the system.

The T blowout preventer is designed so that hydraulic pressure opens and


closes the rams and provides a means for side ram removal.
Ram opening pressure, shown in blue on the illustration, opens the rams and
closes the bonnets after ram change-out. The rams are pulled outward, close to
the bonnets before the bonnets begin moving toward the preventer body. This
assures that the rams never obstruct the bore or interfere with pipe in the hole.
Hydraulic pressure draws the bonnets tightly against the preventer body and the
bonnet studs are hydraulically tensioned to hold the bonnets closed. Ram
opening pressure is also used to automatically unlock the ST-locks.

T BOP Operating Data and Fluid Requirements


Bore Size and
Working Pressure

Gallons to Open
Pipe Rams (1 Set)

Gallons to Close
Pipe Rams (1 Set)

Gallons to Open
Bonnets (1 Set)

Gallons to Close
Bonnets (1 Set)

Closing
Ratio

Opening
Ratio
4.3:1

Gallons to Unlock
ST Locks (1 Set)
__

Gallons to Lock
ST Locks (1 Set)
__

13-5/8" 10,000 psi

12.9

13.9

15.43

13.75

8.6:1

18-3/4" 15,000 psi

22.4

24.3

27.63

24.64

6.7:1

3.1:1

3.42

3.41

T BOP Hydraulic Operating System

SD-10806

SD-10806

Ram Open _ Bonnet Closed, ST-Lock Unlock


Ram Closed _ Bonnet Open
ST-Lock Lock

T and U II BOP Accessories

T and U II BOP Accessory Part Numbers


Part Number

A high-pressure, hydraulic pump system is utilized with all Cameron T and


U II BOPs for tensioning of the bonnet studs.

Description

645035-02

High-Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs

615309-01

10-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

615309-02

25-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

708490-01

Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity)

26

To Contents Page

T BOP Dimensions
D

Both the 13-5/8" 10,000 psi WP and the 18-3/4" 15,000 psi WP T BOPs are
available in single, double and modular configurations. In addition, end
preparations can be API flange, clamp hub or studded connections.
The following designations refer to the T BOP dimensional drawings on this
page:
A-1 Length -- bonnets closed, with ST-locks
A-2 Length -- bonnets opened, with ST-locks
A-3 Length -- bonnets closed, locking screws locked
A-4 Length -- bonnets opened, locking screws unlocked
B-1 Height -- flanged
B-2 Height -- clamp hubs
B-3 Height -- studded x flanged
B-4 Height -- modular
C
Width -- no side outlets

Centerline of preventer to outlet flange or hub face. This distance is


variable and must be determined per individual specifications
Top of preventer to centerline of outlet -- flanged
Top of preventer to centerline of outlet -- Cameron clamp hubs
Top of preventer to centerline of outlet -- studded x flanged
Top of preventer to centerline of outlet -- modular
Top of upper ram to top flange face
Top of upper ram to top hub face
Top of upper ram to studded face
Top of upper ram to modular face
Height of ram
Centerline of upper outlet to centerline of lower outlet
Centerline of upper ST-lock (or locking screw) to centerline of lower
ST-lock (or locking screw)

E-1
E-2
E-3
E-4
F-1
F-2
F-3
F-4
G
H
J

A-1 (Bonnets Closed)

A-3 (Bonnets Closed)

A-4 (Bonnets Opened)

A-2 (Bonnets Opened)

F
E

SD-8635

SD-8491

Side View - 18-3/4" T BOP

C
D

SD-8635

Side View - 13-5/8" T BOP

SD-8492

End View - 18-3/4" T BOP

End View - 13-5/8" T BOP

13-5/8" 10,000 psi WP T BOP Dimensions


Style
Single

A-3
124"

A-4
175.6"

B-1
43.6"

B-2
34.4"

B-3
33.5"

B-4
23.3"

C
32"

E-1
26.7"

E-2
22.1"

E-3
16.6"

E-4
16.6"

F-1
18"

F-2
13.4"

F-3
7.9"

F-4
7.9"

G
7.5"

H
24.6"*

J
24.6"

Weight
15,500 lb

Double

124"

175.6" 68.2"* 59.0"*

58.1"*

32"

26.7"

22.1"

16.6"

18"

13.4"

7.9"

7.5"

24.6"*

24.6"

27,650 lb

Add 12.9" for 30" spacing between rams.

18-3/4" 15,000 psi WP T BOP Dimensions


Style
Single

A-1
177"

A-2
217"

B-1
64.2"

B-2
53"

B-3
49"

B-4
32.1"

C
47"

E-1
40.6"

E-2
35.1"

E-3
25.6"

E-4
24.6"

F-1
26.4"

F-2
20.8"

F-3
11.3"

F-4
10.3"

G
11.5"

H
34"*

J
34"

Weight
44,000 lb

Double

177"

217"

98.3"*

87"*

83.1"*

47"

40.6"

35.1"

25.6"

26.4"

20.8"

11.3"

10.3"

11.5"

34"*

34"

85,000lb

Add 7.6" for 30" spacing between rams.

27

To Contents Page

13-5/8 10,000 psi WP T BOP Part Numbers


9

7
5
8

13
10

SD-10809

11

16

13-5/8" 10,000 psi WP T BOP


12

13-5/8" 10,000 psi WP T BOP Component List and Part Numbers


Item
Item
1

Description
Description
Body (Type)

Qty
1

Part No.
644765-01

Item
Item
9

Bonnet Subassembly, RH

Description
Description

644797-01

Qty

Part No.

2*

Plug

201026

10

Bonnet Subassembly, LH

644797-02

TX Bonnet Gasket

644799-01

11

Nut Subassembly

644616-02

Screw, 12 Pt Cap

24

702585-14-00-10

12

Collar Subassembly

644789-01

Bonnet Stud

644652-01

13

O-Ring

702645-32-31

Bearing Retainer

644653-01

14*

Pipe Plug

K201024

Split Bearing

644654-01

Wear Ring

614742-10

15*
16

Pipe Plug
Ram Guide Pin

4
4

675029-49
644658-01

*Not shown.

28

To Contents Page

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Part Numbers

46

44

45

42

43

79
78

86
37

47

48

40

41

39

60

53

36

49

50

57

59

38

66
61
56

51
74

73

72

68

67

62

63

51

54

84
SD-10808

69
64

52

58

55

85
30

65

77

76

75

71

70

32
31

33

35

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Exploded View

34

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Parts List


Item

Description

Qty.

Item

Part No.

Description

Qty.

Part No.

30

Bonnet

644630-01

59

Retaining Ring, Spirolox

018572-18

31

Liner, Operating Cylinder

644631-01

60

O-Ring, Size 360

702645-36-01

32

O-Ring

644768-02

61

Screw, 12 Pt Cap

702585-06-00-30

33

Operating Piston Subassembly

644791-01

62

Backup Ring

644771-01

34

Seal Ring

710410

63

Seal Ring

710369

35

Wear Ring

614742-08

64

Retainer Ring

644737-01

36

Ram Change Piston, Open

644637-01

65

Retaining Ring, Spirolox

708393

37

Ram Change Piston, Close

644637-02

66

Locking Screw Housing

644734-01

38

Seal Ring

710505

67

Locking Screw

644733-01

39

Wear Ring

614742-09

68

O-Ring, Size 459

702645-45-91

40

Cylinder, Ram Change System

644640-01

69

Stud, Double Ended

644450-03

41

O-Ring, Size 336

702645-33-61

70

Nut

644792-01

42

Gland, Ram Change System

644641-01

71

Button

644635-01

43

Backup Ring

644381-06

72

Inner Seal, Hydraulic Bonnet Stud Piston

644651-01

44

Seal Ring

710504

73

Inner Seal, Hydraulic Bonnet Nut

644438-02

45

O-Ring, Size 341

702645-34-11

74

Outer Seal, Hydraulic Bonnet Nut

644439-02

46

Seal Retainer, Ram Change System

644642-01

75

Spacer Ring, Hydraulic Bonnet Stud

644650-01

47

Cylinder Head, Ram Change System

644643-01

76

O-Ring, Size 362

702645-36-22

48

O-Ring, Size 338

702645-33-81

77

Retaining Ring, Spirolox

033186-05

49

Insert, Bonnet Gasket

644644-01

78

Gland

017454-46

50

Screw, 12 Pt Cap

12

702585-14-00-26

79

Blind Plug

017454-36

51

Backup Ring

644381-05

80*

Check Valve

709493

52

Seal Ring

710430

81*

Bleeder Plug Assembly

640202-02

53

Seal Carrier

644726-01

82*

High Pressure Plug

615684-02

54

O-Ring, Size 352

702645-35-21

83*

O-Ring, Size 113

702645-11-31

55

Seal Ring

609745-14

84

Tubing Connector

707276

56

Backup Ring

644381-04

85

Male Quick-Disconnect

708490-01

57

Seal Ring

710429

58

Retainer Ring

644648-01

*Not shown

29

To Contents Page

18-3/4 15,000 psi WP T BOP Part Numbers

5
8

13
10
11
17

12

16
SD-8060

18-3/4" 15,000 psi WP T BOP

18-3/4" 15,000 psi WP T BOP Component List and Part Numbers


Item
Item
1

Description
Description
Body (Typical)

Qty
1

Part No.

Item
Item

644622-01

Description
Description

Bonnet Subassembly, RH

Qty

644562-01-02-01

644562-02-02-02

Plug

201026

10

Bonnet Subassembly, LH

TX Bonnet Gasket Kit

644770-01

11

Nut Subassembly

16

Screw, 12 Pt Cap

48

702585-14-00-10

12

Collar

16

Bonnet Stud

16

644362-01

13

O-Ring

Bearing Retainer

644361-01

Split Bearing

16

644360-01

16
17

Ram Guide Pin


Retaining Ring, Spirolox

Wear Ring

16

645363-01

30

To Contents Page

Part No.

8
16

644616-01
615707-01
702645-32-61
644399-01
711202

18-3/4" 15,000 psi WP T BOP Bonnet Subassembly Part Numbers

47

48

41

38

40

39

37

36

61

60

69

61

46

70

44

45

42

43

50

49

53

58

55

52

62
65

52

51

51

51

59

56

54

57

SD-8061

83

81

82

80

78

79

63

76

75

73

74

30

64

18-3/4" 15,000 psi WP T BOP Bonnet Subassembly


32

31

77
33
35

34

18-3/4" 15,000 psi WP T BOP Bonnet Subassembly Parts List


Item

Description

30

Bonnet

31

Liner, Operating Cylinder

32

O-Ring, Size 387

33

Operating Piston Subassembly

34
35

Qty.
1

Part No.

Item

Description

Qty.

Part No.

644414-01

55

Seal Ring

709630

644470-01

56

Spacer Ring, Connecting Rod

644355-01

702645-38-71

57

Ret. Ring, Primary Conn. Rod Seal

644356-01

644483-04

58

Retaining Ring, Spirolox

709503

Seal Ring

709635

59

O-Ring, Size 453

702645-45-31

Wear Ring

614742-06

60

Seal Sub, Blind

644491-02

36

Ram Change Piston, Open

644301-01

61

O-Ring, Size 214

702645-21-41

37

Ram Change Piston, Close

644301-02

62

Screw, 12 Pt Cap

702585-06-00-42

38

Seal Ring

709632

63

Stud, Double Ended

644450-01

39

Wear Ring

614742-05

64

Cap Nut

644447-01

40

Cylinder, Ram Change System

615685-01

65

ST-Lock Assembly

645021-01

41

O-Ring, Size 348

702645-34-81

69

Gland, Tubing

017454-46

42

Gland, Ram Change System

615711-01

70

Blind Plug

017454-36

43

Backup Ring

644381-03

71*

Valve, Check

709643

44

Seal Ring

709633

73

High Pressure Plug

615684-02

45

O-Ring, Size 428

702645-42-81

74

O-Ring, Size 113

702645-11-31

46

Seal Retainer, Ram Change System

615712-01

75

Connector, Tubing

707276

47

Cylinder Head, Ram Change System

615713-01

76

Male Quick-Disconnect

708490-01

48

O-Ring, Size 425

702645-42-51

77

Button

615706-01

49

Insert, Bonnet Gasket

644358-03

78

Inner Seal, Hydraulic Bonnet Nut

644438-01

50

Screw, 12 Pt Cap

12

702585-14-00-20

79

Spacer Ring, Hydraulic Bonnet Stud

644359-01

51

Backup Ring

644381-02

80

Outer Seal, Hydraulic Bonnet Nut

644439-01

52

Seal Ring

709631

81

Piston, Hydraulic Bonnet Stud

615709-01

53

Wear Ring

644443-01

82

O-Ring, Size 377

702645-37-71

54

Backup Ring

644381-01

83

Retaining Ring, Spirolox

709636

*Not shown

High Temperature Connecting Rod Seal Part Numbers*


Item
52

Description
Connecting Rod Seal

Part Number
712021

55

Connecting Rod Seal

712022

*Order both part numbers.

31

To Contents Page

T BOP Pipe Rams


Pipe rams are available for use in Cameron T BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the chart on
this page. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.

CAMRAM Top Seal

CAMRAM Packer
Ram Body

SD-10824

Wear Pad
Screw

T BOP Pipe Ram

T BOP Pipe Ram Part Numbers


18-3/4" 15,000 psi***
Top Seal 644369-01-00-01

13-5/8" 10,000 psi****


Top Seal 644409-01

Pipe Size
Ram
644479
__

Packer
644427
__

Assembly
644458

Ram
644401

Packer
644486

Blind

Assembly
644457
__

()-01

()-01

()-01**

1.315"

__

__

__

()-02

()-02

()-02

1.660"

__

__

__

()-03

()-03

()-03

1.900"

__

__

__

()-04

()-04

()-04

2.062"

__

__

__

()-05

()-05

()-05

2.375"

()-01

()-01

()-02

()-06

()-06

()-06**

2.875"

()-02

()-02

()-03

()-07

()-07

()-07**

3.500"

()-03-00-01

()-03

()-04**

()-08

()-08

()-08**

4.000"

()-04

()-04

()-05

()-10

()-10

()-10

4.500"

()-05

()-05

()-06

()-12

()-12

()-12**

4.750"

()-06

()-06

()-07

()-14

()-14

()-14

5.000"

()-07

()-07

()-08-00-01

()-15

()-15

()-15**

5.500"

()-08

()-08

()-09-00-01

5.562'

()-09

()-09

()-10

()-17
__

()-17
__

()-17**
__

6.000"

()-10

()-10

()-11

()-18

()-18

()-18

6.625"

()-11

()-11

()-12-00-01

()-19

()-19

()-19

7.000"

()-12

()-12

()-13

()-20

()-20

()-20**

7.625"

()-13

()-13

()-14

()-21

()-21

()-21**

8.625"

()-14

()-14

()-15

()-22

()-22

()-22

9.000"

()-15

()-15

()-16

()-23

()-23

()-23

9.625"

10.750"

()-17

()-17

()-18

()-24
__

()-24
__

()-24**
__

11.750"

()-18

()-18

13.375"

3.500" Aluminum

()-20

()-20

4.000" Aluminum

()-21

()-21

4.500" Aluminum

()-22

5.000" Aluminum

()-23

()-19

__

__

__

__

__

__

()-21

()-09

()-09

()-09

()-22

()-11

()-11

()-11

()-22

()-23

()-13

()-13

()-13

()-23

()-24

()-16

()-16

()-16

Base numbers remain the same. Dash numbers change by pipe size.
**Currently available.
***Additional part numbers include: right side wear pad, 2011279-01; left side wear pad, 2011279-02 and, screws, 644349-01.
****Additional part numbers include: right side wear pad, 2011277-01; left side wear pad, 2011277-02; and, screws, 644349-01.

T BOP CAMRAM 350 Packers and Top Seal Part Numbers


Description

18-3/4" 15,000 psi

Top Seal

645068-01

3-1/2" Packer

645070-04

5" Packer

645070-08

32

To Contents Page

T BOP Shearing Blind Rams


Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
Features include of shearing blind rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
The single-piece body incorporates an integrated cutting edge.
CAMRAM top seals are standard for all T BOP shearing blind rams.
H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service.
The Cameron SBR has a single-piece body with an integrated cutting edge.

10

11
SD-10830

7
2
6

9
8

CAMRAM 350 Shearing Blind Ram for T BOP Part Numbers


2

Item
2

Description
Right Packer

Upper SBR

18-3/4" 15,000 psi WP


644893-01-00-01

3
4

Left Packer
Top Seal*

644893-02-00-01
645068-01-00-02

Blade Packer

644894-01-00-01

Lower SBR

T BOP Shearing Blind Ram

*The part numbers listed above are used for both standard and high temperature applications except for
the top seal.

T BOP Shearing Blind Ram Part Numbers


18-3/4" T BOP
Item

Description

1
2
3
4
5
6
7
8
9
10
11

Body
Right Packer
Left Packer
Top Seal
Blade Packer
Right Wear Pad
Left Wear Pad
Screw
Blade Insert
Screw
Pin

13-5/8" T BOP

Upper SBR
644514-01

Lower SBR
644514-02

644515-01
644893-01-00-01
644893-02-00-01
644369-01-00-01
644894-01-00-01
2011279-01
2011279-02
644349-01
644519-03
644524-01
__

644515-02
644893-01-00-01
644893-02-00-01
644369-01-00-01
__
2011279-01
2011279-02
644349-01
644519-02
__
200231

Upper SBR
644591-01

Lower SBR
644591-02

644402-01
644490-01
644490-02
644409-01
644541-01
2011277-01
2011277-02
644349-01
644581-01-00-01
644582-01
__

644402-02
644490-01
644490-02
644409-01
__
2011277-02
2011277-02
644349-01
644581-02-00-01
__
200231

T BOP Variable Bore Rams


CAMRAM Top Seal

One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all T BOP variable bore rams.
The variable bore ram packer contains steel reinforcing inserts similar to those in
the Cameron annular BOP packer. The inserts rotate inward when the rams are
closed so the steel provides support for the rubber which seals against the pipe.

CAMRAM Packer
Ram Body

SD-10831

Left Wear Pad


Right Wear Pad

T BOP Variable Bore Ram

T BOP Variable Bore Ram Part Numbers


BOP Size and
Working Pressure

Pipe Size Range

Assembly

Body

13-5/8" 10,000 psi

2.875" to 5.000"

644618-01

644567-01

644549-01

18-3/4" 15,000 psi

3.500" to 5.000"

644533-02

644576-01

644531-01-01

18-3/4" 15,000 psi

3.500" to 5.500"

2163169-01

18-3/4" 15,000 psi

3.500" to 7.625"

644533-01

Screw

Right
Wear Pad

Left
Wear Pad

Screw
Wear Pad

644409-01

2011277-01

2011277-02

644349-01

644369-01-00-01

2011279-01

2011279-02

644349-01

2163170-01

644531-01-01-01 644369-01-00-01

2011279-01

2011279-02

644349-01

644575-01

644404-01-00-01 644369-01-00-01

2011279-01

2011279-02

644349-01

Packer

33

To Contents Page

Top Seal

TL BOP
Wear pads are included on the bottom of all TL BOP rams.
Bonnet seal carrier eliminates the need for high make-up torque on bonnet
studs and nuts.
Manual lock screws and hydro-mechanical locking devices, wedgelocks,
ST-Locks or RamLocks are available.
Tandem boosters are available to shear large, extra-heavy wall casing.
Available in 13-5/8 10,000, 15,000 WP psi and 18-3/4 5000, 10,000 and
15,000 WP psi sizes with many body configurations.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.

The Cameron TL BOP is the result of an evolution of Camerons successful


BOP product lines, including the U, UII, and T BOPs. Eliminating separate
bonnets and intermediate flanges simplified the BOP. Cameron also
incorporates the bonnet seal carrier and other features into the TL to reduce
maintenance and rig time. The TL also features side ram removal, which
shortens the BOPs height and saves rig time. Other features of the TL include:
Bonnet studs rather than bonnet bolts reduce the need to make and break
threads in the BOP body.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets because the operating
cylinder and ram-change cylinders fit between the bonnet and end flange
with tie-bolts holding the assembly together.
Access caps on the ram change pistons enable easier access from the end of
the bonnet.
Piston area is large enough to shear all commonly used sizes and grades of
drill pipe.
Super shear bonnets and non-sealing super shear rams are available for
shearing drill collars and large casing.
Side ram removal reduces stack height and simplifies ram change-out.

TL BOP Rams
Standard pipe rams, variable bore rams and flexpackers are available in
most sizes. For shearing, Cameron offers the shearing blind rams, DVS rams
that shear and seal and non-sealing super shear rams for shearing drill collars
and large casing.

SD-25381

18-3/4 15,000 psi WP TL BOP with RamLocks

SD25382

18-3/4 15,000 psi WP TL BOP with ST-Locks

34

To Contents Page

TL BOP Heights and Weights

BOP Size and


Working Pressure

Body
Style

Height

Weight (lbs)

Flange X Studded Studded x Studded Lock Screws

Wedgelocks

ST-Locks

RamLocks

Super Shears

13-5/8 10,000 psi WP

Double

56.00"

23,651

N/A

TandemBoosters
N/A

18-3/4 5000 psi

Single

33.50"

17,500

18,700

20,050

N/A

20,500****
39,300****

18-3/4 5000 psi

Double

58.00"

33,600

36,000

38,300

N/A

18-3/4 10,000 psi

Single

41.34"

27.00"****

22,700

N/A

26,450

25,750

N/A

N/A

18-3/4 10,000 psi


18-3/4 15,000

Double
Single

65.98"
49.03

42,400

N/A
N/A

60,500
39,150

48,474
35,950

N/A

N/A
44,650

18-3/4 15,000

Double

83.22

55,440 *

N/A

74,800

68,400

70,025*** 66,825**

* Flange x Flange
** With RamLocks and Super Shears
*** With ST-Locks and Super Shears
**** With RamLocks and Tandem Boosters
With ST-Locks
Unless otherwise noted, all weights are for flanged x studded body styles

TL BOP End-To-End Lengths


BOP Size and
Working Pressure

Manual Lock Screws

Wedgelocks

ST-Locks

RamLocks

Super Shears

Tandem Boosters

Open

Close

Open

Close

Open

Close

Open

Close

Close

Open

13-5/8 10,000 psi

172.52"

43.02"

N/A

N/A

N/A

18-3/4 5000 psi

207.00"

148.00"

180.03"

147.10"

187.75"

150.86"

N/A

219.25"

182.36"

18-3/4 10,000 psi


18-3/4 15,000

Close

202.95"

167.25"

187.51"

150.86"

N/A

N/A

N/A

228.50"

163.26"

N/A

N/A

215.59"

173.86"

197.64"

155.91"

151.89"

264.27"*

222.53"*

* With ST-Locks

TL BOPs with RamLocks

TL BOPs with Manual Lock Screws


BOP Size and
Working Pressure

Closing
Opening
Volume (gal.) Volume (gal.)

Closing
Ratio

Opening
Ratio

BOP Size and


Working Pressure

Closing
Opening
Volume (gal.) Volume (gal.)

Closing
Ratio

Opening
Ratio

13-5/8" 10,000

5.8

5.5

7.0:1

2.3:1

18-3/4" 5000 psi

21.3

19.3

10.89:1

3.13:1

18-3/4" 5000 psi

20.1

19.3

10.3:1

2.3:1

18-3/4" 10,000 psi

21.3

19.3

10.89:1

3.13:1

18-3/4" 15,000 psi

24.6

23.4

6.7:1

3.1:1

18-3/4" 15,000 psi

25.9

22.3

7.13:1

3.10:1

Closing
Ratio

Opening
Ratio

Note: 18-3/4 5000/10,000 psi - RamLock Lock/Unlock 7.6 gal.


Note: 18-3/4 15,000 psi - RamLock Lock/Unlock 11 gal.

TL BOPs with Wedgelocks


BOP Size and
Working Pressure

TL BOPs with ST-Locks

Closing
Opening
Volume (gal.) Volume (gal.)

Closing
Ratio

Opening
Ratio

BOP Size and


Working Pressure

Closing
Opening
Volume (gal.) Volume (gal.)

18-3/4" 5000 psi

20.1

19.3

10.3:1

2.3:1

18-3/4" 10,000 psi

24.6

23.4

6.7:1

3.1:1

18-3/4" 15,000 psi

24.6

23.4

6.7:1

3.1:1

18-3/4" 15,000 psi

24.6

23.4

6.7:1

3.1:1

Closing
Ratio

Opening
Ratio

17.3:1

8.9:1

Note: 18-3/4 5000 psi - Wedgelock Closing .32 gal


Note: 18-3/4 5000 psi - Wedgelock Opening 5.75 gal.

Note: ST-Lock Lock 3.4 Gal

TL BOPs with RamLocks and Tandem Boosters

TL BOPs with Super Shear Rams

BOP Size and


Working Pressure
18-3/4" 5000 psi

Closing
Opening
Volume (gal.) Volume (gal.)
28.7

26.7

Closing
Ratio

Opening
Ratio

33.56:1

11.2:1

Closing
Ratio

Opening
Ratio

14.3:1

6.9:1

BOP Size and


Working Pressure
18-3/4" 15,000 psi

TL BOPs with ST-Locks and Tandem Boosters


BOP Size and
Working Pressure
18-3/4" 15,000 psi

Closing
Opening
Volume (gal.) Volume (gal.)
45.4

54.1

Note: ST-Lock Lock 3.4 Gal

35

To Contents Page

Closing
Opening
Volume (gal.) Volume (gal.)
71.3

67.1

TL BOP with RamLock Components


9
10
12
11
13
18
14
15
39
32
31
45

28

RamLock Bonnet Subassembly

33

35

3
29

26
27
5
27
6
30

SD-25383

34
35

15

35

14

46

16

35

17
7
8
19
24
25
23
2
38
36
37
21
31
41
39
42

62

20
61

40
24

60
61

22

59
63

44

57

35

63

43

58
65
65
64
49
51
52
48
50

RamLock Operating Piston Subassembly

53
54
56
55
56
55

36

To Contents Page

TL BOP with RamLock Components


RamLock Bonnet Subassembly Components

RamLock Operating Piston Subassembly Components


Item

Qty

1
2

1
1

Bonnet
Operating Piston with RamLock Subassembly
(see page 36 for exploded view)

48
49

1
1

Secondary Piston
Polypak

50

Whistle Piston

Ram Change Piston (Open)

51

Sealing Shoulder Screw

Ram Change Piston (Close)

52

O-Ring

Ram Change Cylinder

53

Main Piston

Ram Change Access Cap

O-Ring

54
55

6
12

Lock Component (Main Piston with Keys and Screws)


Alignment Key (Main Piston)

8
9

1
1

Back-Up Ring
Retaining Ring, Spirolox (Connecting Rod)

56
57

12
1

Socket Head Cap Screw


Piston Front Plate

10

Retainer Ring (Primary Connecting Rod)

58

11

Back-Up Ring (Connecting Rod)

59

16

12

Seal Ring (Primary Connecting Rod Seal)

60

Front Plate Connecting Rod

13

Ring Spacer (Connecting Rod)

61

Socket Head Set Screw (Half Dog Rod-to-Front Plate) Optional

14
15

2
2

Seal Ring (Secondary Connecting Rod Seal)


Back-Up Ring (Connecting Rod)

62
63

1
1

Button for Operating Piston (Connecting Rod)


Pipe-Threaded Hex Socket Plug (Front Plate)

16

Retainer Ring (Primary Connecting Rod)

17

Retaining Ring, Spirolox (Connecting Rod)

64
65

1
1

Front Plate Stinger


Seal Ring (Three-Function Stinger)

18
19

1
1

Wear Ring
Operating Piston Cylinder

66

Thread Sealant

Adhesive (Loctite 242 50 cc Bottle)

20

Hydraulic RamLock Cylinder Head

21

Double-Ended Stud (Cylinder Head-to-Bonnet)

22

Cap Nut

23

Seal Ring (Operating Piston Seal

24
25

2
1

O-Ring (Operating Cylinder and End Cap)


Wear Ring (Operating Piston)

26

Wear Ring (Ram Change Piston)

27

O-Ring (Ram Change Cylinder)

28

Seal Ring (Ram Change Piston)

29
30

2
2

Seal Ring (Ram Change Piston)


O-Ring (Ram Change Access Cap)

31

Lifting Eye

32

Tubing Gland (Bonnet and Cylinder Head)

33

Blind Plug (Bonnet and Cylinder Head)

34

Check Valve

35

Pipe Plug (2 Bonnet, 2 Cylinder Head, 1 Cap,


1 Lower Bonnet Drain Plug)

36

Seal Ring (Cylinder Head)

37

Hydraulic RamLock Seal Sleeve (Cylinder Head)

38

Seal Retainer for Lock Cylinder (Cylinder Head)

39

8 ft

40

90-Degree Male Elbow (Cylinder Head)

41
42

1
1

Make Tubing Connector (Cylinder Head)


Male Branch Tubing Tee (Cylinder Head)

43

32

44

Hydraulic RamLock End Cap (Cylinder Head)

45
46

2
1

Bonnet Flange Bearing


Blind Flange (Cylinder Head)

47

Thread Sealant

Paste #503 Molybedenum Disulfide (4 lb can)

Seal Repair Kit (Parts for One Bonnet)

Item

Qty

Description

* Not Shown

316L Stainless Steel Hydraulic Tubing (Cylinder Head)

Socket Head Cap Screw

* Not Shown

37

To Contents Page

Description

O-Ring (Front Plate)


Socket Head Cap Screw (Front Plate-to-Main Piston)

TL BOP with ST-Lock Components


9

15

34

31 31

35 36

7
8
19

15

20
33

10

12

30

30

14

32
29 29
2

27
27

11

21

40

1
17 16

14

20

13

23

36
34 35

25

26 28

29
22 29
SD-016682

30

30

3
32

37 24
39

38

ST-Lock Bonnet Assembly

41
33

ST-Lock Bonnet Subassembly Components


Item

Qty

Item

Qty

1
2

1
1

Bonnet
Operating Piston Subassembly

Description

24
25

1
1

Back-Up Ring (Tail Rod)


Retaining Ring, Spirolox (Tail Rod)

Ram Change Piston (Open)

Ram Change Piston (Close)

26
27

1
1

Seal Ring
O-Ring (Operating Piston)

Ram Change Cylinder

28

Wear Ring

6
7

2
2

Ram Change Access Cap


Hydraulic Bonnet Subassembly (Cylinder Head)

29

Wear Ring (Ram Change Piston)

30

O-Ring (Ram Change Cylinder)

O-Ring

31

Seal Ring (Ram Change Piston Seal)

Retaining Ring, Spirolox (Connecting Rod)

32

Seal Ring (Ran Change Piston Seal)

10

Retainer Ring (Primary Connecting Rod)

33

O-Ring (Ram Change Access Cap)

11
12

1
1

Back-Up Ring (Connecting Rod)


Seal Ring (Primary Connecting Rod Seal)

34
35

2
2

Lifting Eye
Tubing Gland

13

Ring Spacer (Connecting Rod)

36

Blind Plug

14

Seal Ring (Secondary Connecting Rod Seal)

37

Back-Up Ring (Connecting Rod)

15
16

2
1

Back-Up Ring (Connecting Rod)


Retainer Ring (Primary Connecting Rod)

38
39

1
1

ST Lock Assembly (see page 39 for exploded view)


Sequencing Valve Assembly (see page 39 for exploded view)

17

Retaining Ring, Spirolox (Connecting Rod)

40

Check Valve

18

Wear Ring

41

12-Point Cap Screw

19

Operating Piston Cylinder

42

Threaded Pipe Plug

20

Cylnder Head

43

Threaded Pipe Plug

21

Double-Ended Stud

44

O-Ring

22

Heavy Hex Nut

45

Back-Up Ring

23

Seal Ring (Tail Rod)

38

To Contents Page

Description

TL BOP with ST-Lock Components

59
50

66

ST-Lock Assembly Components

75
60

Item

Qty

Description

46
47

1
1

Stem and Locking Wedge Assembly


Locking Cylinder

68

48

Brake Hub

69

49

Brake Ring with Dowel Pins

50

Unlock Piston

51

Spring

52
53

1
1

O-Ring
Alignment Key Assembly

54

End Cap

55

O-Ring

56
57

1
1

O-Ring
End Cap (Brake Piston End)

58

Socket Head Cap Screw

59

O-Ring

60

O-Ring

61

O-Ring

62
63

1
1

Bearing
Bearing Subassembly

64

Overhauling Nut

65

Seal Ring

66

Sequence Cap Head

67
68

1
1

Sequence Cap Body


Sequence Cap Valve Poppet

69

Sequence Cap Seat

70

Spring

71

O-Ring

72
73

1
1

O-Ring
O-Ring

74

O-Ring

75

12-Point Cap Screw

71

64

70

73
72

63

67

63

74

63

57
53
61
47
51
49

65
46

62
58

55

48

54
56
52

ST-Lock Assembly

SD-016680

88

93

ST-Lock Sequencing Valve Subassembly Components


Item

Qty

76

Poppet

77

Compression Spring

78

Valve Seat

79

Actuator

80

O-Ring

81

O-Ring

82
83

1
2

Liner
O-Ring

84

Compression Spring

85

Cap

86
87

4
1

Hex Head Cap Screw


Body

88

O-Ring

89

Balance Piston

90

Poppet Stop

91

O-Ring

92
93

1
1

O-Ring
O-Ring

Adhesive, Loctite

* Not Shown

87

Description
82

91
89

81

92

79

83

90

77
84
76
85

78
86
83

80

ST-Lock Sequencing Valve Subassembly


39

To Contents Page

SD-016681

Annular BOPs
D BOP

DL BOP

To Contents Page

D and DL Annular Blowout Preventer


Twin seals separated by a vented chamber positively isolate the BOP
operating system from well bore pressure. High strength polymer bearing
rings prevent metal-to-metal contact and reduce wear between all moving
parts of the operating systems.
All Cameron DL BOPs are manufactured to comply with NACE specification
MR-01-75 for H 2S service.
Packers for DL BOPs have the capacity to strip pipe as well as close and seal
on almost any size or shape object that will fit into the wellbore. These
packers will also close and seal on open hole. Some annular packers can
also be split for installation while pipe is in the hole. Popular sizes of the
DL BOP are available with high-performance CAMULAR annular packing
subassemblies. See page 46 for information on high temperature
CAMULAR products.
The Cameron DL BOP is available in sizes from 7-1/16 to 21-1/4 and in
working pressures from 2000 to 20,000 psi.

In the unique design of the Cameron DL Annular BOP, closing pressure


forces the operating piston and pusher plate upward to displace the solid
elastomer donut and force the packer to close inward. As the packer closes,
steel reinforcing inserts rotate inward to form a continuous support ring of steel
at the top and bottom of the packer. The inserts remain in contact with each
other whether the packer is open, closed on pipe or closed on open hole. Other
features of the DL BOP include:
The Cameron DL BOP is shorter in height than comparable annular
preventers.
A quick-release top with a one-piece split lock ring permits quick packer
change-out with no loose parts involved. The design also provides visual
indication of whether the top is locked or unlocked.
The DL BOP is designed to simplify field maintenance. Components subject
to wear are field-replaceable and the entire operating system may be
removed in the field for immediate change-out without removing the BOP
from the stack.

Packer Inserts
Bore of Top
Quick-Release Top

Access Flaps

Outer Cylinder Lock-Down

Locking Grooves in Body

Packer
Vent

Donut

Pusher Plate

Opening Side of Piston

Closing Side of Piston


Opening Hydraulic Ports
Closing Hydraulic Ports

SD-203-03

Operating Piston

Vent

DL Annular BOP

42

To Contents Page

D and DL Annular BOP Dimensions, Weights and Components


Comparative Size and Weight Data (All Models Flanged)
16

Size and
Working Pressure

17
11

37
10

46

12

45

67

66

Height
(Inches)

Diameter
(Inches)

7-1/16" 3000 psi

23-15/16

27-7/8

7-1/16" 5000 psi

25-1/2

27-7/8

7-1/16" 10,000 psi

34-7/32

7-1/16", 15,000 psi

Weight
(Pounds)

Gallons
to Close

Gallons
to Open

2738

1.69

1.39

2778

1.69

1.39

37-3/8

7255

2.94

2.55

44-3/4

43-1/4

12,000

6.94

6.12

7-1/16", 20,000 psi

50-3/4

48

17,716

8.38

7.56

11", 3000 psi

32-1/2

41-1/4

8255

5.65

4.69

11", 5000 psi

34-15/16

41-1/4

8447

5.65

4.69

11", 10,000 psi

41-1/16

48-1/2

13,954

10.15

9.05

11", 15,000 psi

62-1/2

61

36,500

23.50

21.30

13-5/8" 3000 psi

36-11/16

50

12,855

12.12

10.34

13-5/8", 5000 psi

40-3/16

52-3/8

16,215

12.12

10.34

13-5/8", 10,000 psi

49-3/32

61

27,262

18.10

16.15

16-3/4" 3000 psi

47

60-1/2

25,950

22.30

19.00

16-3/4" 5000 psi

49

60-1/2

26,300

22.30

19.00

18-3/4" 5000 psi

60-13/16

62

29,560

35.60

29.00

18-3/4" 10,000 psi

70-1/2

67

40,632

51.00

45.10

20-3/4" 3000 psi

54-3/4

66

29,500

40.50

28.40

21-1/4" 2000 psi

53-5/16

66

29,000

40.50

28.40

Annular Blowout Preventer Components


7

Item
No.

36
6
55

50
31

69
57
60
52
58
4

59
14

13

53
63

68

64

56

65

3
51
62

54

61
29
34

30

Item
No.

Description

Body

43

Stud

Top

44

Nut

Piston

45

Bushing Retaining Screw

46

Oil Injection Fitting

To Contents Page
4
Inner Cylinder Head

15

Outer Cylinder Head

47

Lifting Eye*

Pusher Plate

50

Support Plate Bearing Ring

Donut & Packer**

51

Piston ID Bearing Ring

Lock Ring

52

Inner Cylinder OD Bearing Ring

10

Actuator Ring

53

Outer Cylinder ID Bearing Ring

11

Actuator Screw

54

Piston OD Bearing Ring

12

Actuator Screw Bushing

55

Pusher Plate Bearing Ring

13

Outer Cylinder Lock Segment

56

Outer Cylinder ID Wiper Ring

14

Lock Segment Retaining Ring

57

Inner Cylinder OD Wiper Ring

15

Support Plate

58

Inner Cylinder ID Lip Seal

16

Top Trash Seal

59

Inner Cylinder ID Lip Seal

17

Actuator Screw Bearing

60

Inner Cylinder OD Lip Seal

29

Anchor Shackle

61

Piston ID Lip Seal

30

Inner Cylinder Stud

62

Piston OD Lip Seal

31

Inner Cylinder Nut

63

Outer Cylinder ID Lip Seal

32

Stud

64

Outer Cylinder OD Lip Seal

33

Nut

65

Outer Cylinder OD Lip Seal

34

Lock Ring Access Port Plug

66

Top ID Lip Seal

35

Hydraulic Port Plug

67

Top OD Lip Seal

36

Pusher Plate Screw

68

Outer Cylinder ID Lip Seal

37

Actuator Ring Stop Screw

69

Inner Cylinder OD Lip Seal

38

Lifting Eye*

75

Inner Cylinder ID Backup Ring*

39

Lifting Eye*

76

Inner Cylinder OD Backup Ring*

40

Lifting Eye*

77

Outer Cylinder ID Backup Ring*

41
42

Lifting Eye*
Lifting Eye*

78

Top ID Backup Ring*

A complete replacement kit for seals, bearings and scrapers is available.


*Not shown on the illustration.
**CAMULAR high-performance donuts and packers are available for most sizes and working pressures
of the annular BOP.

1
35

Description

SD-5306

Annular BOP Components


43

To Contents Page

7-1/16" 3000 - 11" 15,000 psi WP D and DL Annular BOP Part Numbers
Item

Description

3
4
5
6
7
9
10
11
12
13
14
15
16
17
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
75
76
77
78
***

Piston
Inner Cylinder Head
Outer Cylinder Head`
Pusher Plate
Donut & Packer****
Lock Ring
Actuator Ring
Actuator Screw
Actuator Screw Bushing
Outer Cylinder Lock Segment
Lock Segment Retaining Ring
Support Plate
Top Trash Seal
Actuator Screw Bearing
Anchor Shackle
Inner Cylinder Stud
Inner Cylinder Nut
Stud
Nut
Lock Ring Access Port Plug
Hydraulic Port Plug
Pusher Plate Screw
Actuator Ring Stop Screw
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Stud
Nut
Bushing Retaining Screw
Oil Injection Fitting
Lifting Eye*
Support Plate Bearing Ring
Piston ID Bearing Ring
Inner Cyl. OD Bearing Ring
Outer Cyl. ID Bearing Ring
Piston OD Bearing Ring
Pusher Plate Bearing Ring
Outer Cyl. ID Wiper Ring
Inner Cyl. OD Wiper Ring
Inner Cylinder ID Lip Seal
Inner Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Piston ID Lip Seal
Piston OD Lip Seal
Outer Cylinder ID Lip Seal
Outer Cylinder OD Lip Seal
Outer Cylinder OD Lip Seal
Top ID Lip Seal
Top OD Lip Seal
Outer Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Inner Cyl. ID Backup Ring*
Inner Cyl. OD Backup Ring*
Outer Cyl. ID Backup Ring*
Top ID Backup Ring*
Complete Replacement Kit

7-1/16" 3000 and


5000 psi
Qty

1
1
1
1
1
1
1
4
4
1
1
8
4
8
8
2
2
24
4
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1

Part No.

699333-01
699334-01-02
699335-01
699336-01

7-1/16" 10,000
psi
Qty

1
1
1
1
644856-02
1
644856-03-00-02 1
699338-01
1
049089-03
4
699343-03
4
__
__
2010341-01
1
046045-19
1
046045-19
8
701002
4
046037-24
12
049800-01
12
__
__
005930-04-10
2
005930-04-10
2
046052-04
24
046052-03
4
700734
4
012185-03
4
012185-02
4
700735
4
__
__
__
005940-01-18
4
700710
4
__
4
049122-01
1
2010196-13
1
2010196-01
1
2010196-02
1
2010196-14
1
699345-04
1
700713
1
700715
1
615851-31-01
1
615851-32-01
1
615847-30-01
2
615851-33-01
1
615847-31-01
1
615851-30-01
2
615847-29-01
1
615847-28-01
1
615851-29-01
1
706258-11
1
__
__
__
__
__
__
049742-01
1

Part No.

699333-02
699334-02-02
699335-02
699336-02

7-1/16" 15,000
psi
Qty

1
1
1
1
644856-03-00-02 1
699337-02
1
699338-02
1
049089-01
4
699343-01
4
__
__
2010341-02
1
046045-20
1
644868-01
8
701003
4
046037-16
12
049800-01
12
__
__
005930-05-10
2
005930-05-10
2
046052-05
24
046052-01
4
700734
4
012185-03
4
012185-02
4
700735
4
__
__
__
702514-25-20-08 4
700710
4
012185-01
049122-02
1
2010196-15
1
2010196-03
1
2010196-04
1
2010196-16
1
699345-05
1
700810
1
700809
1
615850-24-01
1
615851-26-01
1
615847-26-01
1
615851-27-01
1
615847-27-01
1
615851-25-01
1
615847-25-01
1
615847-24-01
1
615850-23-01
1
706258-04
1
__
1
__
1
__
__
__
__
1
049742-02
1

Part No.

699333-10
699334-10
699335-10
699336-10
644856-11-00-01
699337-10
699338-10
049089-01
699343-01
__
__

7-1/16" 20,000
psi
Qty

1
1
1
1
1
1
1
4
4
3
1
2010341-15
1
046045-14
1
644868-01
8
663311-13
4
046037-30
12
049800-08
12
__
__
005930-07-10
2
005930-05-10
2
046052-08
24
046052-01
4
012185-03
4
012185-02
4
700735
4
700734
2
__
__
__
702514-25-20-08 4
700710
4
__
049122-07
1
2010196-36
1
2010196-33
1
2010196-34
1
2010196-35
1
699345-08
1
705151
1
705152
1
615850-37-01
1
615851-35-01
1
615846-26-01
1
615851-36-01
1
615847-35-01
1
615850-36-01
1
615847-32-01
1
615847-33-01
1
615850-35-01
1
706258-01
1
615851-34-01
1
615847-34-01
1
__
1
__
1
__
1
615399-07
1
049742-13
1

Part No.

699333-11
699334-11-01
699335-11
699336-11
644856-11-00-01
699337-11
699338-11
049089-01
699343-01
614350-02
049416-02
2010341-11
046045-10
644868-01
663311-13
392002-09-00-70
049800-03
__
__

11" 3000 and


5000 psi
Qty

1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
6
6
005930-07-10
2
005930-05-10
2
046052-08
24
046052-01
4
012185-03
4
012185-02
4
700735
2
700734
4
__
2
__
__
702514-25-20-08 4
700710
2
__
2
049122-07
1
2010196-32
1
2010196-33
1
2010196-34
1
2010196-31
1
699345-08
1
705151
1
705152
1
615851-35-01
1
615850-37-01
1
615846-26-01
2
615851-36-01
1
615847-37-01
1
615850-36-01
2
615847-36-01
1
615847-36-01
1
615850-35-01
1
706258-05
1
615851-34-01
615847-34-01
615378-02
615622-02
615378-03
615378-04
049742-03
1

*Not shown on the drawing


***Seals, bearings and scrapers
****These items are sold as a subassembly (packer and donut).
CAMULAR

44

To Contents Page

Part No.

699333-03
699334-27
699335-27
699336-03

11" 10,000
psi
Qty

1
1
1
1
644856-04-00-02 1
699337-27
1
699338-27
1
049089-01
4
699343-01
4
614350-03
3
049416-03
1
2010341-03
1
046045-11
1
644868-01
8
701004
4
046037-17
8
049800-04
8
__
__
005930-05-10
2
005930-05-10
2
046052-06
24
049477-01
4
011849
4
012185-03
4
012185-01
2
012185-02
700735
__
__
702514-25-20-08 4
700594
2
701960
049122-03
1
2010196-17
1
2010196-05
1
2010196-06
1
2010196-18
1
699345-02
1
700619
1
700618
1
615850-15-01
1
615850-14-01
1
615847-17-01
1
615851-16-01
1
615847-16-01
1
615851-17-01
1
615846-04-01
615846-03-01
1
615850-13-01
1
706258-02
1
__
1
__
1
__
__
__
__
049742-09
1

Part No.

699333-04
699334-28
699335-28
699336-04

11" 15,000
psi
Qty

1
1
1
1
644856-05-00-02 1
699337-28
1
699338-28
1
049089-01
4
699343-01
4
614350-04
3
049416-04
1
2010341-07
1
046045-12
1
699344-01
8
663311-13
4
046037-19
12
049800-05
12
__
__
005930-07-10
2
005930-05-10
2
046052-07
24
049477-01
4
011849
4
012185-03
4
012185-02
2
__
__
__
__
702514-25-20-08 4
700594
2
__
049122-04
1
2010196-19
1
2010196-07
1
2010196-08
1
2010196-20
1
699345-06
1
700812
1
700811
1
615850-40-01
1
615850-41-01
1
615847-38-01
1
615851-38-01
1
615847-39-01
1
615851-37-01
1
__
1
615846-27-01
615850-38-01
1
706258-03
1
615850-39-01
1
615846-28-01
1
__
1
__
1
__
1
__
1
049742-10
1

Part No.

699333-38
699334-38
699335-38
699336-38
644800-38-00-01

699337-38
699338-38
049089-01
699343-01
614350-09
049416-09
2010341-13
046045-15
699344-02
663311-13
046037-26
049800-05
__
__
614271-03
005930-06-10
046052-10
046052-01
011849
012185-03
012185-02
__
__
__
__
702514-25-20-08
700594
__
049122-10
2010196-40
614246-49
614246-50
2010196-39
699345-10
706452
706451
615850-28-01
615850-27-01
615846-21-01
615850-25-01
615846-19-01
615850-26-01
615846-20-01
__
615850-29-01
046001-01-42
615850-28-01
615846-21-01
615378-01
615378-06
615378-06
615378-05
049742-14

13-5/8" 5000 - 21-1/4" 2000 psi WP D and DL Annular BOP Part Numbers
Item
3
4
5
6
7
9
10
11
12
13
14
15
16
17
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
75
76
77
78
***

13-5/8"
5000 psi

Description
Piston
Inner Cylinder Head
Outer Cylinder Head`
Pusher Plate
Donut & Packer****
Lock Ring
Actuator Ring
Actuator Screw
Actuator Screw Bushing
Outer Cylinder Lock Segment
Lock Segment Retaining Ring
Support Plate
Top Trash Seal
Actuator Screw Bearing
Anchor Shackle
Inner Cylinder Stud
Inner Cylinder Nut
Stud
Nut
Lock Ring Access Port Plug
Hydraulic Port Plug
Pusher Plate Screw
Actuator Ring Stop Screw
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Stud
Nut
Bushing Retaining Screw
Oil Injection Fitting
Lifting Eye*
Support Plate Bearing Ring
Piston ID Bearing Ring
Inner Cyl. OD Bearing Ring
Outer Cyl. ID Bearing Ring
Piston OD Bearing Ring
Pusher Plate Bearing Ring
Outer Cyl. ID Wiper Ring
Inner Cyl. OD Wiper Ring
Inner Cylinder ID Lip Seal
Inner Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Piston ID Lip Seal
Piston OD Lip Seal
Outer Cylinder ID Lip Seal
Outer Cylinder OD Lip Seal
Outer Cylinder OD Lip Seal
Top ID Lip Seal
Top OD Lip Seal
Outer Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Inner Cyl. ID Backup Ring*
Inner Cyl. OD Backup Ring*
Outer Cyl. ID Backup Ring*
Top ID Backup Ring*
Complete Replacement Kit

Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
6
6
2
2
24
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1

13-5/8"
10,000 psi

16-3/4"
3000 and 5000 psi

Part No.
Qty Part No.
699333-05
1 699333-06
699334-05-02 1 699334-30
699335-05
1 699335-30
699336-05
1 699336-06
644856-06-00-02 1 644856-07
699337-05
1 699337-30
699338-05
1 699338-30
049089-01
4 049089-02
699343-01
4 699343-02
614350-05
3 614350-01
049416-05
1 049416-01
2010341-05
1 2010341-06
046045-01
1 046045-09
644868-01
8 699344-02
663311-13
4 663311-13
046037-19
12 0046037-20
049800-05
12 049800-05
__
__
__
__
005930-07-10
005930-05-10
046052-08
046052-01
011849
012185-03
012185-02
__
__
__
__
702514-2520-08
700594
__
049122-05
2010196-21
2010196-09
2010196-10
2010196-22
699345-01
700320
700581
615850-21-01
615850-20-01
615847-22-01
615851-23-01
615847-21-01
615851-24-01
615846-11-01
615846-10-01
615850-19-01
706258-07
__
__
__
__
__
__
049742-11

Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
8
8
2 005930-08-10 2
2 005930-06-10 2
24 046052-09
24
4 046052-02
4
4 011849
4
4 700649
4
2 012185-01
2
4 012185-03
4
2 700446
__
__
4 702514-254
20-08
2 700594
2
__
1 049122-06
1
1 2010196-23
1
1 2010196-11
1
1 2010196-12
1
1 2010196-24
1
1 699345-03
1
1 700319
1
1 700320
1
1 615850-32-01 1
1 615850-33-01 1
1 615847-40-01 2
1 615850-30-01 1
1 615846-22-01 1
2 615850-31-01 1
1 615846-23-01 1 615846-24-01 1
1 615850-34-01 1
1 706258-10
1
1 615851-28-01 1 615846-25-01 __
__
__
__
1 049742-12
1

18-3/4"
5,000 psi

Part No.
699333-18
699334-18
699335-18
699336-18

Qty
1
1
1
1
644800-18-00-01 1
699337-18
1
699338-18
1
049089-02
4
699343-02
4
614350-07
3
049416-07
1
2010341-12
1
046045-08
1
699344-02
8
663311-13
4
046037-25
16
049800-06
16
__
__
614271-01
2
005930-06-10 2
046052-09
24
046052-02
4
011849
4
012185-02
4
012185-01
2
700446
4
__
__
__
702514-254
20-08
700594
4
__
049122-08
1
2010196-30
1
2010196-25
1
2010196-26
1
2010196-42
1
699345-07
1
700994
1
700993
1
615850-44-01 1
615850-45-01 1
615846-27-01 2
615850-46-01 1
615846-29-01 1
615850-43-01 2
__
615846-29-01 1
615850-42-01 1
706258-09
__
__
__
__
__
__
049742-08
1

**Exploded view on page 43 is not representative of this assembly.


***Seals, bearings and scrapers.
****These items are sold as a subassembly (packer and donut).
CAMULAR

45

To Contents Page

Part No.
699333-44
699334-44
699335-44
699336-44
644856-09
699337-44
699338-44
049089-04
699343-04
614350-13
049416-09
2010341-17
046045-22
699344-02
663311-13
046037-32
049800-07
__
__

Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
16
16
614271-02
2
005930-06-10 2
046052-14
24
046052-02
4
011849
4
700649
4
012185-03
2
012185-02
4
__
__
__
702514-254
20-08
700594
2
__
049122-11
1
2010196-51
1
2010196-49
1
2010196-50
1
2010196-52
1
699345-14
708000
1
708003
1
615850-04-01 1
615851-01-01 1
615846-05-01 2
615850-03-01 1
615846-01-01 1
615850-02-01 2
__
615846-02-01 1
615850-01-01 1
__
1
__
__
__
__
__
__
1
049742-16
1

18-3/4"
10,000 psi
Part No.
699333-21
699334-21
699335-21
699336-21
644856-01
699337-21
699338-21
049089-02
699343-02
614350-06
049416-06
615483-01
046045-16
699344-02
663311-13
046037-27
049800-07
__
__

Qty
1
1
1
1
1
1
4
16
16
20
20
614271-01
2
005930-06-10 046052-11
24
046052-02
4
011849
2
700649
2
012185-03
012185-02
__
__
36
__
36
702514-2520-08
700594
__
615482-01
1
2010196-29
1
2010196-47
1
2010196-28
1
2010196-30
1
699345-13
705710
705711
1
615851-02-01 1
615850-08-01 1
615846-16-01 1
615850-09-01 1
615846-15-01 1
615850-07-01 __
2
615846-14-01 615850-01-01 706258-12
__
__
__
__
__
615378-01
049742-17
1

20-3/4"
3000 psi**
Part No.
699333-47
699334-47
644172-01
699336-47
644800-47
__
__
__
__
__
__
2010341-18
__
__
663311-13
046037-34
049800-12
005919-08-10
2709000-18-09
005930-06-10
__
046052-15
046052-16
700649
012185-02
__
__
__
615447-01-10
2709000-19-09
__
__
__
049122-12
2010196-53
2010196-54
2010196-55
2010196-56
__
__
615399-12
615850-12-01
615851-03-01
615846-18-01
615850-11-01
615846-17-01
__
615850-10-01
__
__
__
__
__
__
__
__
__
049742-18

21-1/4"
2000 psi**
Qty
1
1
1
1
1
1
4
12
12
24
24
2
24
4
2
4
24
24
-

Part No.
699333-47
699334-47
644172-01
699336-47
644800-47
__
__
__
__
__
__

1
1
1
1
1
1
1
1
1
1
1
2
1

__
__

2010341-18
__
__
663311-13
046037-34
049800-12
006306-16-10
2709000-15-09
005930-06-10
__
046052-15
046052-16
700649
012185-02
__
__
__
615447-02-10
2709000-19-09
__

049122-12
2010196-53
2010196-54
2010196-55
2010196-56
__
__
615399-12
615851-03-01
615850-12-01
615846-18-01
615850-11-01
615846-17-01
__
615850-10-01
__
__
__
__
__
__
__
__
__
049742-18

D and DL BOP Replacement Part Kits


design will fill most voids created from excessive wear and tear to the seal
groove. Seal kits have been created which include all the operating system seals
for the annular BOPs listed below.

For popular size D and DL BOPs, a BOP replacement part kit is available to
provide all seals, bearings and scrapers required during normal maintenance.
Kit parts are shrink-film packed to prevent loss and assure long shelf life and
are less expensive than individual parts. All parts in each kit are identified with
part numbers and parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal
is available for service in annular BOPs that have pitted, corroded or oversized
seal grooves. To enhance the performance life of the used annular BOP, this seal

16
17

D BOP Replacement Part Kit Part Numbers


BOP Size
7-1/16"

Pressure Rating (psi)


3000, 5000

Replacement Kit
049742-01

'D' Seal Kit


__

7-1/16"

10,000

049742-02

__

7-1/16"

15,000

049742-13

__

7-1/16"

20,000

049742-03

__

11"

3000,5000

049742-09

__

11"

10,000

049742-10

__

11"

15,000

049742-14

__

13-5/8"

5000

049742-11

2010006-01

13-5/8"

10,000

049742-12

16-3/4"

3000,5000

049742-08

2010006-05
__

18-3/4"

5000

049742-16

2010006-04

18-3/4"

10,000

049742-17

20-3/4"

3000

049742-18

2010006-03
__

21-1/4"

2000

049742-19

__

67

66

55
50

57

Replacement Part Kit Components


Item Number*
16
17
50
51
52
53
54
55
56
57
58
59
60
61
62

Quantity
1
8
1
1
1
1
1
1
1
1
1
1
2
1
1

63
64

2
1

Seal Ring
Seal Ring

65
66
67

1
1
2

Seal Ring
Seal Ring
Seal Ring

52

Description
Top Trash Seal
Actuator Screw Bearing
Inner Cylinder Head Ring
Bearing
Bearing
Bearing
Bearing
Wear Ring
Wiper Ring
Wiper Ring
Seal Ring
Seal Ring
Seal Ring
Seal Ring
Seal Ring

60
58
59
53
56
64
63

65

51

61

54

62

SD-5306

D BOP

*Item numbers are standard bill of material numbers for a complete assembly.

Higher Temperatures
Packer

For temperatures greater than 250F and high H2S levels, CAMULAR severe
service elastomer is recommended. The D BOP packing element comes only as
a complete subassembly, which includes packer and donut Contact your local
Cameron representative for details. CAMULAR part numbers are listed on
pages 44-45.

Donut
SD-5306

D BOP Packing Element Subassembly


46

To Contents Page

Workover BOPs
C BOP S/QRC BOP
G-2 Snubbing BOP

To Contents Page

C BOP
Provides maximum shearing capacity to ensure reliable shearing and sealing
with a maximum closing pressure of 2800 psi achieved with a 15" diameter
operating piston coupled with DSI Shear Rams

The Cameron C BOP was designed as an emergency safety head for


snubbing coiled tubing workover applications. The main function of the C BOP
is to shear whatever is in the hole from braided cable to perforating guns
and form a safe, pressure-tight seal. Features of the C BOP include:
C BOPs are compact

DSI Shear Rams shear and seal wireline, braided cable, perforating guns,
gravel pack screen assemblies, etc.

Visual position indicators clearly show the lock and unlock status, as well as
the ram position

Rams are mounted on removable buttons that may be easily changed out if
required

Bonnet contains an auxiliary connecting rod seal for back-up in emergency


situations

Close and Lock functions are independent, allowing shearing without


automatically locking

BOP can be installed in different orientations through the use of duplicate


plumbing ports

Rams are automatically unlocked prior to opening through the use of a


sequence valve

Ram changeout is simple because of the elongated top bonnet stud

Available in 7" and 11" 10,000 and 15,000 psi WP models


Meets all applicable API, DNV, NORSK and HSE specifications

SD-25380

C Blowout Preventer

C BOP Fluid Requirements


Size

Working
Pressure

Rams Open
(One Set)

Rams Close
(One Set)

Ram Closing
Ratio

Ram Opening
Ratio

Wedgelocks
Lock (2)

7-1/16"

10,000 psi

9.6 gal.

9.6 gal

32.3:1

32.3:1

1 gal.

Size

Working
Pressure

Length
(Bonnets Closed)

Length
(Bonnets Open)

Width

Height

Weight

7-1/16"

10,000 psi

81.37"

100.37"

44.41"

30.19"

6154 lb

C BOP Dimensions

Dual String Interlocking (DSI) Rams


DSI rams were developed to shear multiple tubing strings regardless of their
orientation to the centerline of the ram bore. They are spring-loaded and
interlocked to prevent vertical separation between the upper and lower blades.
This feature also provides the capability to maintain a seal and shear wireline
and braided cable with zero tension in the line. The efficient shear blade
geometry on both upper and lower rams reduces the required shearing force.
The tool steel inlayed cutting edges include a secondary cutting edge, which
cuts and wipes away any cable strands or shrapnel, which may have survived
the initial shear edges. Clearance below the shear blades is maximized to allow
the fish to collect when shearing large assemblies.

SD-25385

DSI Shear Ram


47

To Contents Page

S/QRC and G-2 Snubbing BOPs


Safety packers seal around tubing in the well bore. Tubing can be stripped or
snubbed through these packers, if necessary.
Wear insert packers are for stripping and snubbing service. These
subassemblies have a wear insert which can be easily replaced to renew the
packer.
Slip inserts are used to hold the tubing string after shearing or during
workover operations by supporting upward and downward forces as well as
torsional forces.
Wireline ram guides have hardened steel guiding surfaces and are
replaceable.
No special operating system is required for shearing.
All S/QRC and G-2 rams are suited for H2S service per NACE MR-01-75.

The Cameron S/QRC and G-2 snubbing blowout preventers are used in well
workover and servicing operations. S/QRCs are ram-type preventers which
maintain pressure control for all types of workover wells. The Cameron G-2 BOP
is suitable for wells requiring a 4-1/16" 5000 or 10,000 psi or 7-1/16" 5000 psi
snubbing preventer.

S/QRC and G-2 BOP Rams


Cameron S/QRC and G-2 snubbing BOPs can be equipped with the proper
rams to perform a full range of snubbing preventer operations.
Four types of ram bodies are available for the 4-1/16" 10,000, 15,000 and
25,000 psi S/QRC and 4-1/16" 5000 and 10,000 psi G-2 BOPs. These include
blind, pipe, shear and wireline rams. Pipe rams can be fitted with safety packers,
wear insert packers or slip inserts. Blind and pipe rams are available for all
sizes. Features include:

SD-10821

S/QRC Workover BOP


(Available in 3-1/16" 20,000 psi, 4-1/16" 10,000, 15,000 and 25,000 psi and 7-1/16" 20,000 psi)

SD-10822

G-2 Workover BOP


(Available in 4-1/16" 5000 and 10,000 psi and 7-1/16" 5000 psi)

48

To Contents Page

S/QRC and G-2 BOP Rams


Wear Insert Packer
Wear Insert Subassembly

SD-5169-3

SD-5169-2

Safety Packer

SD-5169-4

Slip Insert Subassembly

Wear Insert Packer Subassembly

Pipe Ram Part Numbers


(4-1/16" 10,000 and 15,000 psi S/QRC and 4-1/16" 5000 and 10,000 psi G-2)

Tubing
Size

Safety Packer*
Ram Assembly**

Safety
Packer**

Pipe
Ram Body**

Top
Seal**

Blind

046955-01

046941-01

046938

046950

Wear Insert
Packer Subassembly**
__

Wear Insert
Packer**
__

Wear Insert
Subassembly**
__

Slip Insert
Subassembly**
__

1.050"

046955-02

046941-04

046940-03

046950

614267-01

614262-01

614259-01

614442-01

1.315"

046955-03

046941-03

046940-02

046950

614267-02

614262-02

614259-02

614442-02

1.660"

046955-04

046941-02

046940-01

046950

614267-03

614262-03

614259-03

614442-03

1.900"

046955-05

046942-01

046940-04

046950

614267-04

614262-04

614259-04

614442-04

2.000"

046955-06

046942-02

046940-05

046950

614267-05

614262-05

614259-05

614442-05

2.062"

046955-07

046942-03

046940-06

046950

614267-06

614262-06

614259-06

614442-06

2.375"

046955-08

046942-04

046939-01

046950

2.875"

046955-09

046942-05

046939-02

046950

614267-07
__

614262-07
__

614259-07
__

614442-08

614442-07

*Includes pipe ram body, top seal and safety packer.


**2 of each required.

Shear Blade
Upper Ram Body
Lower Ram Body
Bolt

SD-5219

Blade Retainer

Shear Ram

Shear Ram Part Numbers


(Sealing-Type Shear Ram Available for 4-1/16" and 7-1/16" 5000 psi Not Shown)

BOP BOP
Description
Description

Shear Ram Assembly*

Upper Ram Body

Lower Ram Body

Shear Blade

Blade Retainer

Qty Part Number

Qty Part Number

Qty Part Number

Qty Part Number

Bolts

Qty

Part Number

Qty

Part Number

4-1/16" 5000 and 10,000 psi G-2

614411-01

614402-02

614402-01

614413-01

614414-01

4-1/16" 10,000 and 15,000 psi S/QRC

614411-01

614402-02

614402-01

614413-01

614414-01

4 702585-14-00-24

4-1/6" 25,000 psi S/QRC

644254-01

644253-01

644253-02

644252-01

644252-01

4 702585-14-00-24
701683

*Shear ram assembly includes upper and lower shear rams.

Top Seal

Wireline Guide
Upper Ram Body
SD-10819

Wireline Packer
Lower Ram Body
Screw**

Wireline Ram

Wireline Ram Part Numbers


(4-1/16" 5000 and 10,000 psi G-2 and 4-1/16" 10,000 and 15,000 psi S/QRC)

Wireline
Size
(In.)

Wireline Ram
Assembly*
(1 Required)

Upper Ram
Body
(1 Required)

Lower Ram
Body
(1 Required)

Top
Seal
(2 Required)

Wireline
Packer
(2 Required)

Wireline
Guide
(2 Required)

0-0.250

614263-06

614236-01

614235-01

046950

046941-10

614264-01

0.312

614263-01

614236-01

614235-01

046950

046941-05

614264-01

0.438

614263-02

614236-02

614235-02

046950

046941-06

614264-02

0.562

614263-03

614236-03

614235-03

046950

046941-07

614264-03

0.750

614263-04

614236-04

614235-04

046950

046941-08

614264-04

0.875

614263-05

614236-05

614235-05

046950

046941-09

614264-05

*Wireline ram assembly includes upper and lower wireline rams.


**Screw part number: 702507-06-00-06.

49

To Contents Page

Clamp Connections
Bearing Ring

Load Ring

SD-7039

Nut

Forged Thru-Bolt Cameron Clamp Part Numbers


Bore Size
and
Working Pressures
(psi)
1-13/16" 10,000
1-13/16" 15,000
1-13/16" 20,000
2-1/16" 5000
2-1/16" 10,000
2-1/16" 15,000
2-1/16" 20,000
2-9/16" 5000
2-9/16" 10,000
2-9/16" 15,000
2-9/16" 20,000
3-1/8" 5000
3-1/8" 10,000
3-1/8" 15,000
3-1/8" 20,000
4-1/16" 5000
4-1/16" 10,000
4-1/16" 15,000
4-1/16" 20,000
7-1/16" 2000
7-1/16" 5000 (RX)
7-1/16" 5000 (BX)
7-1/16" 10,000 (RX)
7-1/16" 10,000 (BX)
7-1/16" 15,000 (RX)
7-1/16" 15,000 (BX)
7-1/16" 20,000
9" 5000
9" 10,000
11" 3000
11" 5000
11" 10,000
11" 15,000
13-5/8" 3000
13-5/8" 5000
13-5/8" 10,000
13-5/8" 15,000
16-3/4" 2000
16-3/4" 3000
16-3/4" 5000
16-3/4" 10,000
18-3/4" 10,000
18-3/4" 15,000
18-3/4" 15,000 (HBC)
20-3/4" 2000
20-3/4" 3000
21-1/4" 2000
21-1/4" 5000
21-1/4" 7500
21-1/4" 10,000
24-1/4" 1000
30-1/2" 1000
34" 1000
36" 1000

Seal
Ring
Number
RX
20
20
__

BX
151
151
151
152
152
152
152
153
153
153
153
154
154
154
154
155
155
155
155
__
__

AX
__
__
__
__
__
__
__
__
__
__
__

CX
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__

Clamp
Assembly
Part No.

Clamp
Part No.
644021
(2 Reqd)

Bolt
Part No.
(4 Reqd)

Nut
Part No.
(8 Reqd)

Load Ring
Part No.
(8 Reqd)

Bearing Ring
Part No.
(8 Reqd)

()-01
()-02
()-03
()-01
()-02
()-03
()-03
()-02
()-04
()-03
()-06
()-04
()-05
()-06
()-08
()-05
()-06
()-08
()-10
()-25
()-07
()-08
()-08
()-10
()-10
()-22
()-15
()-08
()-10
()-09
()-10
()-22
()-15
()-11
()-13
()-15
()-28
()-12
()-14
()-19
()-28
()-27
()-26
()-32
()-18
()-18
()-18
()-27
()-26
()-26
()-21
()-20
()-24

005912-60-10
702533-08-10-80
702533-09-10-90
005912-60-10
702533-08-10-80
702533-09-10-90
702533-09-10-90
702533-08-10-80
702533-09-10-82
702533-09-10-90
709949
702533-09-10-82
702533-09-10-82
709949
702533-13-11-32
702533-09-10-82
702533-10-10-93
702533-13-11-32
702533-14-11-61
702533-08-10-82
702533-12-11-20
702533-13-11-32
702533-13-11-32
702533-14-11-61
702533-14-11-61
702533-19-11-80
702533-21-11-91
702533-13-11-32
702533-14-11-61
702533-12-11-30
702533-14-11-61
702533-19-11-80
702533-21-11-91
702533-12-11-50
702533-19-12
702533-21-11-91
702533-25-12-60
702533-12-11-50
702533-14-11-81
702533-21-12-32
702533-25-12-60
707902
709446
644970-01-00-01
702533-19-12-00
702533-19-12-00
702533-19-12-00
707902
709446
709446
702533-11-11-50
702533-13-11-70
702533-14-11-80

2709000-09-01
2709000-09-01
2709000-10-01
2709000-09-01
2709000-09-01
2709000-10-01
2709000-10-01
2709000-09-01
2709000-10-01
2709000-10-01
012955-53-10
2709000-10-01
2709000-10-01
012955-53-10
2709000-14-01
2709000-10-01
12955-53-10
2709000-14-01
2709000-15-01
2709000-09-01
2709000-13-01
2709000-14-01
2709000-14-01
2709000-15-01
2709000-15-01
2709000-19-01
2709000-20-01
2709000-14-01
2709000-15-01
2709000-13-01
2709000-15-01
2709000-19-01
2709000-20-01
2709000-13-01
2709000-19-01
2709000-20-01
049800-11
2709000-13-01
2709000-15-01
2709000-20-01
049800-11
713034
644076-01
645015-01
2709000-19-01
2709000-19-01
2709000-19-01
713034
644076-01
644076-01
2709000-12-01
2709000-14-01
2709000-15-01

697491-05
697491-05
697491-06
697491-05
697491-05
697491-06
697491-06
697491-05
697491-06
697491-06
697491-07
697491-06
697491-06
697491-07
697491-10
697491-06
697491-07
697491-10
697491-11
697491-05
697491-09
697491-10
697491-10
697491-11
697491-11
697491-12
697491-04
697491-10
697491-11
697491-09
697491-11
697491-12
697491-04
697491-09
697491-12
697491-04
697491-01
697491-09
697491-11
697491-04
697491-01
697491-03
697491-02
697491-14*
697491-12
697491-12
697491-12
697491-03
697491-02
697491-02
697491-08
697491-10
697491-11

697492-05
697492-05
697492-06
697492-05
697492-05
697492-06
697492-06
697492-05
697492-06
697492-06
697492-07
697492-06
697492-06
697492-07
697492-10
697492-06
697492-07
697492-10
697492-11
697492-05
697492-09
697492-10
697492-10
697492-11
697492-11
697492-12
697492-04
697492-10
697492-11
697492-09
697492-11
697492-12
697492-04
697492-09
697492-12
697492-04
697492-01
697492-09
697492-11
697492-04
697492-01
697492-03
697492-02
697492-14*
697492-12
697492-12
697492-12
697492-03
697492-02
697492-02
697492-08
697492-10
697492-11

*
*
*
**
**
*
**
**
***
*
*
**
***
***
***
***
**
**
**
***
***
***
*
***
***

713114-01
713114-01
713114-04
713114-01
713114-01
713114-04
713114-04
713114-01
713114-04
713114-04
713114-05
713114-04
713114-04
713114-05
713114-08
713114-04
713114-05
713114-08
713114-09
713114-01
713114-07
713114-08
713114-08
713114-09
713114-09
713114-13
713114-14
713114-08
713114-09
713114-07
713114-09
713114-13
713114-14
713114-07
713114-13
713114-14

713114-07
713114-09
713114-14

713114-13
713114-13
713114-13

713114-06
713114-08
713114-09

()-23

702533-19-12-12

2709000-19-01

697491-12

697492-12

***

713114-13

73
74
73
__
__
__
__
__
__

162 041700-19
__
162
__
164
__
164
__
164
__
__
__
__
__
__
__
165
__
166
__
166
__
__
__
__
__
__

21
21
21
__
__
__

615236-01
615236-02
615236-03
615236-01
615236-02
615236-03
615236-03
615236-02
615236-04
615236-03
615236-06
615236-04
615236-05
615236-06
615236-08
615236-05
615236-06
615236-08
615236-10
615236-25
615236-07
615236-08
615236-08
615236-10
615236-10
615236-22
615236-15
615236-08
615236-10
615236-09
615236-10
615236-22
615236-15
615236-11
615236-13
615236-15
615236-28
615236-12
615236-14
615236-19
615236-28
615236-27
615236-26
615236-32
615236-18
615236-18
615236-18
615236-27
615236-26
615236-26
615236-21
615236-20
615236-24

__

__

__

615236-23

24
24
24
__
27
27
27
__
35
35
35
__
39
39
__
__
45
46
__
46
__
46
__
__
50
49
53
54
__
__
57
57
57
__
65
66
__
__
__
__
__

156
__
156
__

041700-27
041700-25
041700-25
__
__
041700-24
__
__
__
041700-02
__
__
__
__
__
__
__
__

156
156
157
157
__ 041700-06
158 041700-08
158 041700-08
__
158
__ 041700-11
160 041700-13
159 041700-15
__
159
__ 041700-17
__
__

__

13
13
__
__
__
__
18
18
18
__
__
__

* (6) 650696-01 Safety Hoist; (6) 712193 Screw


** (4) 650696-01 Safety Hoist; (4) 712193 Screw and (2) 650704-01 Safety Hoist; (2) 712193 Screw
*** (6) 650704-01 Safety Hoist; (6) 712192 Screw

50

To Contents Page

Safety
Hoist

*
*
**
**

Cameron
Wrench
Part No.

Cameron Locations
MANUFACTURING/AFTERMARKET
WESTERN HEMISPHERE
Canada
Cooper Cameron - Edmonton
5003 93RD Street
Edmonton, Alberta T6E 5S9
Tel: 780-434-3476
Fax: 780-437-7397
Mexico
Cooper Cameron Mexico, SA de CV
Av. Acacias Esq. Av.
Ciruelos S/N
CD. IND. Bruno Pagliai
Veracruz, Ver. Mexico, C.P. 91697
Tel: 52-29-891-700
Fax: 52-29-891-701
Cooper Cameron Mexico, SA de CV
Carretera a Monterey, KM 104
Cd. Reynosa/Tamaulipas Mexico
Tel: 52-89-24-7410
Fax: 52-89-24-7420
South America
Equipetrol S.A.
Casilla 156
Carretera Antigua a CBBA, Km 8
Santa Cruz, Bolivia
Tel: 591-3-57=8787
Fax: 591-3-57-8777
Cooper Cameron do Brazil, Ltda
Rod Amaral Peiscoto,
KM 164,5 Imboassica
Macae, Rio de Janeiro, Brazil
CEP 27920-340
Tel: 55-24-773-6331
Fax: 55-24-773-6322

Cameron
710 23 1/4 Road
Grand Junction CO 81505
Tel: 970-241-5711
Fax: 970-241-5730

Cameron Marta-Co
102 Foothill Blvd
Rock Springs WY 82901
Tel: 307-382-3134
Fax: 307-382-3190

Cameron
HIighway 182
Berwick LA 70342
Tel: 504-395-6171
Fax: 504-395-1257

Cameron
1442 East Highway 40
Vernal UT 84078
Tel: 801-781-0434
Fax: 435-789-5656

Cameron
Highway 90 East
Patterson LA 70392
Tel: 504-395-6171
Fax: 504-395-1257

EASTERN HEMISPHERE
Africa
Cameron (Luanda Office)
C/O Cosal lda
Rua Major Kanhanguio No 90
Luanda Rep of Angola
Tel: 244-2-33-13-19
Fax: 244-2-39-04-36

Cameron
1020 Hillcrest Dr.
Laurel MS 39440
Tel: 601-649-8900
Fax: 601-649-8909
Cameron Wellhead Services
503 South Behrend Avenue
Farmington, NM 84701
Tel: 505-327-3402
Fax: 505-327-0454
Cameron
500 North Leech
Hobbs NM 88240
Tel: 505-397-1325
Fax: 505-393-5957

Cameron Argentina S.A.I.C.


AV. Antartida Argentina 2711
2800 Zarate, Argentina
Tel: 54-3487-422297
Fax: 54-3487-423404

Cameron
6441 I.H. 37
Corpus Christi TX 78409
Tel: 361-289-1455
Fax: 361-289-6251

Cameron Venezolana, S.A.


Apartdo 1467
Carretera A. Perija KM 7 1/2
Calle 166 NO. 49 F-180
Barrio el Silencio
Maracaibo, Venezuela 4001-A
Tel: 58-61-312-960
Fax: 58-61-310-638

Cameron Elastomer Technology


29501 Katy Freeway
Katy TX 77494
Tel: 281-391-4600
Fax: 281-391-4640

Cameron Venezolana, S.A.


Zona Industrial de Maturin (Zimca)
Manzana 49, Calle #2,
deras de Vicson
Maturin, Estado Monagas
Tel: 58-91-52-6412
Fax: 58-91-51-6946

Cameron
Highway 90 & FM 1909
Liberty TX 77575
Tel: 936-336-8811
Fax: 936-336-2822
Cameron
2705 E. Marshall Ave.
Longview TX 75602
Tel: 903-236-4884
Fax: 903-234-0336

United States
Cameron
600 East 7th Place, Suite A
Anchorage, AK 99518-5761
Tel: 907-562-2332
Fax: 907-562-3880

Cameron
270 South Grandview
Odessa TX 79761
Tel: 915-337-5475
Fax: 915-337-3001

Cameron
3004 Jewett Ave.
Bakersfield CA 93301
Tel: 661-323-8183
Fax: 661-323-0946

Cameron
7048 Zero Road
Mills WY 82604
Tel: 307-472-0222
Fax: 307-265-1318

Cameron Norway A/S


Mekjarvik 1,
4070 Randaberg
Stavanger, Norway
Tel: 47-51-415-000
Fax: 47-51-418-160
Cameron, The Netherlands
Produktieweg 14, 9601 MA
P.O. Box 121 9600 AC
Hoogezand, The Netherlands
Tel: 31-598-361-900
Fax: 1-598-361-929

Cameron France
92400 Courbevoie
Pointe Noire
Congo, West Africa
Tel: 242-945-563
Fax: 242-940-283

United Kingdom
Cooper Cameron (U.K.) Limited
Queen Street, Stourton
West Yorkshire LS10 ISB
Tel: 44-113-270-1144
Fax: 44-113-276-4751

Cameron
Cilla El Baraka
No. 8 Road 2799
New Maadi
Cairo, Egypt A.R.E.
Tel: 20-2-516-4463
Fax: 20-2-516-4789

Cooper Cameron (U.K.) Limited


Badentoy Avenue
PortlethenAberdeenshire
Scotland AB12 4YB
Tel: 44-1224-282-000
Fax: 44-1224-781-800

Port Gentil
Cameron Gabon, S.A.
B. P. NO. 869
Port Gentil, Republique Gabonaise
Tel: 241-553-026
Fax: 241-555-897

Cameron
7500 SW 29th St.
Oklahoma City OK 73179
Tel: 405-745-2715
Fax: 405-745-4071

Cameron Norway A/S


P. O. BOX 96
5346 Aagotnes
Bergen, Norway
Tel: 47-56-322-811
Fax: 47-56-334-593

ASIA PACIFIC
Cameron
Lot 1 Ballarate Road
Deer Park, Victoria, Australia
Tel: 61-3-9361-4444
Fax: 61-3-9361-4400

Cooper Cameron Corp. - Nigeria


Plot 45 Trans Amadi Ind. Layout
P.M.B. 995
Port Harcourt, Nigeria
Tel: 234-84-236-761
Fax: 234-84-238-742

Cooper Cameron (Singapore) Pte Ltd


Kav 21 C/O P. T. Imeco
Jalan Ampera Raya No. 9 & 10
Cilandak Timur
Jakarta # 12550, Indonesia
Tel: 62-21-780-4125/4102
Fax: 62-21-782-2428

Cooper Cameron Corp. - Nigeria


Ogunu Road
P.M.B. 1066
Warri, Nigeria
Tel: 871-53-230-512 OR 473
Fax: 871-53-230-512

Cooper Cameron Malaysia - Sdn Bhd


2MC, Asian Supply Base
Ranca Ranca Induatrial Estate
Lubuan Federal Territory Malaysia
Tel: 60-87-413-914
Fax: 60-87-415-921

Europe
Cooper Cameron Aktobe
80 Maresyev ST
Bldg.,2,APT.35,41
Kazakhstan
Tel: 7-3132-540-615
Fax: 7-3132-542-519

Cooper Cameron Malaysia - Sdn Bhd


Warehouse 5
Kemaman Supply Base
24007 Kemaman
Terengganu, Malaysia
Tel: 60-9-863-1145
Fax: 60-9-863-1410

Cameron France, S.A.


Plaine Saint Pierre, C S 620
34535 Beziers Cedex France
Tel: 33-4-67-111-502
Fax: 33-4-67-111-504

Akbar Associates
No 12/Street 12
F- 7/2 P.O. Box 1416
Islamabad, Pakistan
Tel: 92-51-274-952
Fax: 92-51-824-141

Cameron GMBH
Lueckenweg 1
29227 Celle, Germany
Tel: 49-5141-8060
Fax: 49-5141-806-333

51

To Contents Page

Cooper Cameron Singapore Pte. Ltd.


No.2 Gul Circle
Jurong Indusrial Estate
Singapore 629560
Tel: 65-861-3355
Fax: 65-861-6197

Cameron Locations
Middle East
Kuala Belait
Cameron SDN BHD
Lot 4007, Kawasan G22
Simpang 17
Seria, Brunei Darussalam
Tel: 673-3-222-613
Fax: 673-3-224-284
Cooper Cameron
c/o Oman United Agencies
P. O. Box 985, Postal Code 112
Muscat, Sultanate of Oman
Tel: 968-591-608
Fax: 968-593-980
Cooper Cameron
c/o Al Rushaid Trading Co.
P.O. Box 31684
Al Khobar 31952
Saudi Arabia
Tel: 966-3-893-3333 ext.399
Fax: 966-3-894-6426
Cameron Middle East Region
C/O Sigma Enterprizes Bldg.
Mussafah Area 7th Street
Abu Dhabi, U.A.E
Tel: 971-2-551-1313
Fax: 971-2-551-0441
SALES OFFICES
WESTERN HEMPISPHERE
Canada
Cooper Cameron - Brooks
#4, 440 Aquaduct Drive
Brooks, Alberta T1R 1C4
Tel: 403-793-2700
Fax: 403-793-2200
Cooper Cameron - Calgary
600 715 5th Avenue SW
Calgary, Alberta T2P 2X6
Tel: 403-261-2800
Fax: 403-262-5181

Cooper Cameron Mexico, SA de CV


Avenida Homero 1804, Ste 403
Col. Chapultepec Morales
11510 Mexico D.F. Mexico
Tel: 52-5-580-0296
Fax: 52-5-395-8669
Cooper Cameron Mexico, SA de CV
AV. Paseo Tabasco No. 17
Col. Municipal
Villahermosa, Tabasco,
Mexico, C.P. 86090
Tel: 52-93-141-755
Fax: 52-93-141-755
South America
Buenos Aires
Cameron Argentina
Maipu 971, Piso 1 DTO D
1006 Buenos Aires, Argentina
Tel: 54-11-4-314-5520
Fax: 54-11-4-311-2838
Cooper Cameron do Brazil, Ltda.
Avendia Paulista, 2.421-Jardins
Sao Paulo - S.P. - Brazil
CEP 01311-300
Tel: 55-11-3066-3600
Fax: 55-11-3064-6228
Cooper Cameron do Brazil, Ltda.
AV. Arcenia Riemma
1451 - Bairro do Una
CEP 120300-000
Taubate - Sao Paulo Brazil
Tel: 55-12-210-1000
Fax: 55-12-218-2319
Cameron
Balfer LTDA
Zona Fraca
P. O. BOX 117-D
Punta Arenas, Chile
Tel: 56-61-213-931
Fax: 56-61-214-379

Cooper Cameron - Ft St. John


259A Tundra Road
British Columbia T1A 1C4
Tel: 250-785-2700
Fax: 250-785-0700

United States
Cameron
950 W Landsel Road
Calipatria CA 92233
Tel: 760-348-2230
Fax: 760-348-2231

Cooper Cameron - Grand Prairie


11302 - 89th Avenue
Grand Prairie, Alberta T8V 5V8
Tel: 780-539-2333
Fax: 780-532-0770

Cameron
418 Baylor Drive
Woodland CA 95695
Tel: 530-668-8069
Fax: 530-668-0948

Cameron
41 Atlantic Street
Darmouth, Nova Scotia B2Y 4P4
Tel: 902-461-4444
Fax: 902-461-0493

Cameron
1660 Lincoln, Suite 2940
Denver CO 80264
Tel: 303-861-1850
Fax: 303-861-1868

Cooper Cameron - Red Deer


Tundra Sales and Service
#9, 4830 - 78Tth Street
Red Deer, Alberta T4P SB3
Tel: 780-342-2700
Fax: 780-340-0700

Cameron
650 Poydras St
Poydras Center, Suite 2310
New Orleans LA 70130
Tel: 504-529-7634
Fax: 504-522-8837

Mexico
Cooper Cameron Mexico, SA de CV
Calle 37 NO. 147-A
Col. Hector Perez Martinez
24100, C.D. Delcarmen, Camp Mexico
Tel: 52-938-27924
Fax: 52-938-27924

Cameron
4341 S. W. 33rd Street
Oklahoma City OK 73119
Tel: 405-682-1661
Fax: 405-682-1051

Cameron
1600 Pacific Place, Suite 1575
Dallas TX 75201
Tel: 214-855-7823
Fax: 214-855-0033
Cameron
307 W. 7th Street, Suite 1800
Fort Worth TX 76102
Tel: 817-870-4810
Fax: 817-870-4814
Cameron - Division Headquarters
13013 Northwest Freeway
Houston TX 77040
Tel: 713-939-2211
Fax: 713-939-2620
Cameron
Route 5, BOX 279-2
Jasper TX 75951
Tel: 409-383-0558
Cameron
306 W. Wall, Suite 1310
Midland TX 79702
Tel: 915-682-4688
Fax: 915-682-4692
EASTERN HEMISPHERE
Africa
Cameron France
92038 Paris-La- Defense Cedex
45 Rue Louis Blanc
92400 Courbevoie
Tel: 242-945-563
Fax: 242-940-283
Cooper Cameron Corp. - Nigeria
18B Thompson Avenue
Ikoya Lagos, Nigeria
Tel: 2341-269-4003
Fax: 2341-269-4003
Europe
Cameron France, S.A.
92038 Paris-La-Defense Cedex
45 Rue Louis Blance
Tel: 33-1-471-76059
Fax: 33-1-471-76099
Cameron France, S.A.
15 Avenue du General de Gaulle
64000 Pau France
Tel: 33-5-59-807-640
Fax: 33-5-59-807-649
Cameron Norway A/S
P. O. BOX 96
5346 Aagotnes
Bergen, Norway
Tel: 47-56-322-811
Fax: 47-56-334-593
Cooper Cameron Corporation
Per. Sadovskikh, 4 Apt. 12
Moscow 103001, Russia
Tel: 7-502-221-3422
Fax: 7-502-221-3010
Cameron, The Netherlands
Sweelinckplein 11
2517GK The Hague
The Netherlands
Tel: 31-70-365-7904
Fax: 31-70-364-5941

52

To Contents Page

United Kingdom
Cooper Cameron
Units 1 & 2 Boundary Road
Harfreys Industrial Estate
Great Yarmouth, Norfolk
England NR31 OLY
Tel: 44-1493-440-438
Fax: 44-1493-655-405
Cooper Cameron (U.K.) Limited
5 Mondial Way
Harlington
Hayes UB3 5AR
Tel: 44-208-990-1800
Fax: 44-208-990-1888
ASIA PACIFIC
Cameron Australasia Pty. Ltd
45-47 Colin Street
West Perth, 6872
Western Australia
Tel: 61-08-9226-1444
Fax: 61-08-9226-1555
Auckland
Cameron
P. O. BOX 672
Papakura, Auckland, New Zealand
Tel: 64-9-299-8103
Fax: 64-9-299-8103
Cooper Cameron Malaysia Sdn Bhd
Lot 1431
Piasau Jaya Industrial Estate
98000 Miri Sarawak
East Malaysia
Tel: 60-85-657-335
Fax: 60-85-656-335
Cooper Cameron Malaysia Sdn Bhd
Jalan Utas 15/7,
Kawasan Perusahaan,
Section 15, 40200 Shah Alam,
Selangor, Malaysia
Tel: 60-3-550-8850
Fax: 60-3-550-4772
Karachi
Indentors
P.O. Box 8926
Karachi, Pakistan
Tel: 2-21-439-794
Fax: 92-21-437-010
Cooper Cameron Corporation
C-O Level 23, CP Tower
313 Silon Road, Bangruk
Bangkok 10500 Thailand
Tel: 66-2-231-8320
Fax: 66-2-231-8321
Middle East
Sultanate of Oman
Cameron Services Middle East L.L.C
P.O. Box 130, Postal Code 124
Road 15
Rusayl Industrial Estate
Sultanate of Oman
Tel: 968-629156
Fax: 968-626923
Cameron
P.O. Box 3266
Doha, Qatar
Tel: 974-410-797
Fax: 974-411-582

CAMERON AND COOPER CAMERON VALVES TERMS AND CONDITIONS OF SALE


1. CONTRACT ACCEPTANCE:
Any written or oral purchase order received from Buyer by Cooper Cameron Corporation, Cameron
Division and Cooper Cameron Valves (Seller) shall be construed as a written acceptance of Sellers offer
to sell and shall be filled in accordance with the terms and conditions of sale set forth herein. SELLERS
ACCEPTANCE OF THIS ORDER IS EXPRESSLY CONDITIONED ON BUYERS ASSENT TO THE TERMS CONTAINED HEREIN. The terms and conditions of Sellers proposal (if any) and acknowledgement shall prevail
over any conflicting or different terms in Buyers order unless Buyer notifies Seller in writing of its objections thereto within fifteen (15) days from receipt of Sellers acknowledgement. Buyers standard terms of
purchase will not be considered a counteroffer to Sellers terms and conditions of sale. The failure of Seller
to object to any provision in conflict herewith whether contained on Buyers purchase order or otherwise
shall not be construed as a waiver of the provisions hereof nor as an acceptance thereof.
2. QUOTATIONS AND PRICES:
All quotations are made for prompt acceptance and any terms quoted therein are subject to change without notice
after thirty (30) days from the date quoted unless specifically stated otherwise on the quotation. Any product, service capability or manufacturing capability which may be available at the time a quotation is made is subject to
prior sale. Prices quoted are valid for thirty (30) days unless specifically stated otherwise on the quotation and are
subject to change without notice. The price in effect at the time of shipment including any escalation formula will
apply, unless a valid quotation or written agreement to the contrary exists between Buyer and Seller. All prices
shown are in U.S. dollars and are F.O.B. Seller s shipping point. Any documentation pertaining to traceability
requirements for raw materials or products or documentation required for any routine or special processes must be
identified by the Buyer at the time of quotation (if any) or at the time of order placement.

3. TAXES:

its option and its own expense, to answer such claim or threat of suit, assume the control of the defense of said
suit, and settle or compromise same in any way Seller sees fit. Other than court-awarded judgments as aforesaid
Seller shall not be liable for any delays, loss of use or for other direct, indirect, incidental or consequential damages
incurred by reason of any such judgment. Seller does not warrant that such material or apparatus (a) will not
infringe any such patent when not manufactured by or for Seller or when specially made in whole or in part to the
Buyers design specification and such infringement arises from the inclusion of such specified design or (b), if used
or sold in combination with other material or apparatus, or if used in the practice of a process, will not, as a result
of such combination or use, infringe any patent covering such combination or process; and Seller shall not be liable
for and does not indemnify Buyer for damages or losses of any nature whatsoever resulting from actual or alleged
patent infringement arising pursuant to (a) or (b) above.

11. SELLERS RIGHT TO MANUFACTURE:


Seller in its sole discretion shall have the right to manufacture the products provided hereunder as far in advance
of its estimated shipping schedule as it deems appropriate. Seller expressly reserves the right to change or modify
the design and construction of any product in due course of Sellers manufacturing procedure without incurring
any obligation or liability to furnish or install such changes, modifications or improvements to products previously
or subsequently sold.

12. ENGINEERING AND SERVICE:


Upon request, Seller will provide engineering and/or technical information regarding its products and their uses
and, if feasible, will provide personnel to assist Buyer in effecting field installations and/or field service. Any such
information, service or assistance so provided, whether with or without charge, shall be advisory only. In that
regard, neither Seller nor Buyer assumes any liability for the acts or omissions of the other party except as may be
provided in these terms.

Any tax or other charge imposed by law on the sale or production of goods or the performance of services shall
be paid by the Buyer, unless the law specifically provides that such payment must be made by Seller, in which case
Buyer shall reimburse Seller for such payment as part of the purchase price. Custom duties, consular fees, insurance charges and other comparable charges will be borne by Buyer.

13. LABOR STANDARDS:

4. SHIPPING SCHEDULE AND DELIVERY:

14. INSPECTION:

Shipment schedules are given as accurately as conditions permit and every effort will be made to make shipments
as scheduled. Seller will not be responsible for deviations in meeting shipping schedules nor for any losses or damages to Buyer (or any third party) occasioned by deviations in the shipping schedule, whether due to Acts of God,
orders bearing priority ratings established pursuant to law, differences with workmen, local labor shortages, fire,
flood, shortages or failure of raw materials, supplies, fuel, power or transportation, breakdown of equipment or
any other causes beyond Sellers reasonable control, whether of similar or dissimilar nature than those enumerated. Seller shall have additional time within which to perform as may be reasonably necessary under the circumstances and shall have the right to apportion its production among its customers in such a manner as it may consider to be equitable. Seller reserves the right to furnish commercially equivalent or better substitutes for materials
or to subcontract the Buyers order or portions thereof as Seller deems necessary. In no event shall Seller be liable
for any consequential damages for labor resulting from failure or delay in shipment. If Buyer requires drawings, procedures, standards or similar material for approval, shipping schedules will be calculated from the time such
approvals are received by Seller, since shipping schedules are based on Seller having all required information and a
firm order from Buyer which is enterable into production. Any hold points, witness points or the need for inspection by Buyers representatives must be identified by Buyer at the time of quotation (if any) and/or order placement
in order that the effect on the prices or shipping schedules (if any) can be taken into account. Additional inspection or testing required by Buyer which affects normal production sequence will be considered as extending the
shipping dates accordingly.

Unless otherwise agreed in writing, final inspection and acceptance of products must be made at Sellers plant or
other shipping or receiving point designated by Seller and shall be conclusive except as regards latent defects.
Buyers representatives may inspect at the Sellers plant or shipping point during working hours prior to shipment
in such manner as will not interfere with operations.

5. MINIMUM BILLING:
Seller reserves the right to impose a minimum billing charge on all sales, change orders or order supplements.

6. TERMS OF PAYMENT:
Terms of payment for all materials and service are 30 days from invoice date, at net price, provided satisfactory
credit has been established. All unpaid invoices are subject to the maximum legal interest rate per annum commencing with the due date.

7. CANCELLATIONS AND RETURNS:


Purchase orders once placed by Buyer and accepted by Seller can be canceled only with Sellers written consent
and upon terms which will save Seller from loss. No products may be returned for credit or adjustment without
written permission from Sellers office authorized to issue such permission.

8. WARRANTIES:
All products of Sellers manufacture are warranted against defects of material and workmanship for a period of
twelve (12) months from the date of installation or eighteen (18) months from date of shipment, whichever period first expires, when such products are used in the service and within the pressure range for which they were
manufactured. In the case of products or parts not wholly of Sellers manufacture, Sellers liability shall be limited
to the extent of its recovery from the manufacturer of such products or parts under its liability to Seller.
Any repair work performed by Seller is warranted for one year from completion of such repairs and applies only
to work performed.
If, within these specified periods, Seller receives notice from Buyer of any alleged defect in or nonconformance
of any product or repair and if in the Sellers sole judgment the product or repair does not conform or is found to
be defective in material or workmanship, then, Buyer shall, at Sellers request, return the part or product F.O.B. to
Sellers designated plant or service location. Seller, at its option and expense, shall repair or replace the defective
part or product, or repay to Buyer the full price paid by Buyer for such defective part, repair or product. Any repayment of purchase price shall be without interest.
Sellers warranty liability, including defects caused by Sellers negligence, shall be limited to such repair, replacement or refund, and shall not include claims for labor costs, expenses of Buyer resulting from such defects, recovery under general tort law or strict liability or for damages resulting from delays, loss of use, or other direct, indirect, incidental or consequential damages of any kind. Seller will not be responsible for failures of products which
have been in any way tampered with or altered by anyone other than an authorized representative of Seller, failures due to lack of compliance with recommended maintenance procedures or products which have been repaired
or altered in such a way (in Seller s judgment) as to affect the products adversely. THIS WARRANTY IS EXPRESSLY
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE WHICH EXCEED THE FOREGOING WARRANTY.

9. NUCLEAR SALES:
The products sold hereunder are not designed or manufactured for use in or with any atomic installation or activity. If the Buyer or ultimate user of these products intends to use them in such an installation or activity, Sellers
Nuclear Terms of Sale shall be part of and control this contract. Seller will furnish Buyer with a copy of its Nuclear
Terms of Sale upon request.

10. PATENT INFRINGEMENT:


Seller warrants that the use or sale of material or apparatus sold or rented by it to Buyer hereunder will not infringe
United States patents of others covering such material or apparatus by itself, and hereby agrees to indemnify Buyer
against judgment for damages for such infringement of any such patent, provided that Buyer shall, upon receipt
of any claim for infringement of any such patent or threat of suit for such infringement or upon the filing of any
suit for infringement, whichever comes first, promptly notify Seller in writing and afford Seller full opportunity, at

CAM/T&C/US/96
REV. 2/96

Seller hereby certifies that these products were produced in accordance with all applicable requirements of Section
6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States
Department of Labor issued under Section 14 thereof.

15. TITLE:
Title to the products sold hereunder passes to Buyer upon payment of the full purchase price.

16. TRANSPORTATION CHARGES, ALLOWANCES, CLAIMS:


All prices are F.O.B. Sellers plant or other designated shipping point.
No freight is allowed unless stated in Sellers quotation (if any) or in a written contract which may exist between
Seller and Buyer at the time of shipment. If Sellers quotation or a written contract states that all or a portion of
freight is allowed, all prices are F.O B. Sellers plant or other designated shipping point, with most economical surface transportation allowed. If the quoted or contractual price includes transportation, Seller reserves the right to
designate the common carrier and to ship in the manner it deems most economical. Added costs due to special
routing requested by the Buyer are chargeable to the Buyer. Under no circumstances is any freight allowance which
is absorbed by Seller to be deducted from the selling price. If the quoted price or contract includes transportation,
no deduction will be made in lieu thereof whether Buyer accepts shipment at plant, warehouse, freight station, or
otherwise supplies its own transportation. When sales are made from the Sellers warehouse, Seller reserves the
right to charge either actual or pro-rated freight from Sellers principle point of manufacture to Sellers warehouse.
Buyer assumes risk of loss upon delivery to the carrier, regardless of who pays shipping costs.
Seller endeavors to pack or prepare all shipments so that they will not break, rust or deteriorate in transit, but
does not guarantee against such damage. Unless requested in writing by the Buyer, no shipments are insured by
Seller against damage or loss in transit. Seller will place insurance as nearly as possible in accordance with Buyers
written instructions but in such case Seller acts only as agent between the insurance company and the Buyer and
assumes no liability whatsoever.
Any claims for shipping loss, breakage or damage (obvious or concealed) are Buyers responsibility and should be
made to the carrier. All claims regarding shortages must be made within thirty (30) days from receipt of shipment
and must be accompanied by the packing list(s) covering the shipment.

17. CONSULAR INVOICES:


Consular fees for legalizing invoices, stamping bills of lading, or other documents required by the laws of any country or destination are not included in quotations or selling prices. If instructed in writing, Seller will make arrangements for consular documents and declarations as agent of the Buyer, but Seller assumes no liability whatsoever
as a result of making such arrangements. Seller assumes no responsibility for any fines or other charges imposed
due to errors or incorrect declarations.

18. INDEMNIFICATION AND LIMITATION OF LIABILITY:


A. INDEMNIFICATION:
Seller agrees to indemnify Buyer and hold Buyer harmless against any claims, demands or causes of action for property damage or personal injury (including death) caused by the negligent act or omission of any employee, agent
or subcontractor of Seller and not contributed to by the negligence of Buyer, its employees, its agents or any third
party. Seller shall not be responsible for the acts and workmanship of employees, agents, contractors or subcontractors of Buyer or any third party, nor for failure or malfunction of any tools, materials, equipment, products, supplies, facilities or devices not manufactured and supplied by Seller. Buyer agrees to hold Seller harmless from any
and all losses, claims, or damages arising from subsurface damage, surface damage caused by subsurface damage,
loss of hydrocarbons and from pollution, regardless of whether such damages, losses or claims were caused by the
negligence or sole negligence of Seller, it being the intent of the parties that this indemnity shall apply to property of Buyer or to that of any third party.
B. LIMITATION OF LIABILITY:
UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS OF ANTICIPATED PROFITS, LOSS OF USE OF EQUIPMENT OR OF
ANY INSTALLATION, SYSTEM OR FACILITY INTO WHICH SELLERS EQUIPMENT MAY BE LOCATED OR AT WHICH
SELLER, ITS AGENT OR SUBCONTRACTOR MAY BE PERFORMING WORK. Sellers total responsibility for any claims,
damages, losses or liabilities arising out of or related to its performance of this contract or the products or services
covered hereunder shall not exceed the purchase price.

19. MODIFICATION, RESCISSION & WAIVER:


The terms herein may not be modified or rescinded nor any of its provisions waived unless such modification, rescission or waiver is in writing and signed by an authorized employee of Seller at its office in Houston, Texas.
Failure of Seller to insist in any one or more instances upon the performance of any of the terms and conditions
of the contract or the failure of Seller to exercise any of its rights hereunder shall not be construed as a waiver or
relinquishment of any such term, condition, or right hereunder and shall not affect Sellers right to insist upon strict
performance and compliance with regard to any unexecuted portions of this contract or future performance of
these terms and conditions.
All orders must be accepted by an authorized employee of Seller. The rights and duties of the parties and construction and effect of all provisions hereof shall be governed by and construed according to the internal laws of
the State of Texas. Any disputes which arise under this agreement shall be venued in the District Court of Harris
County, Texas or in the Southern District of Texas.

CAM-523-F

To Contents Page

Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com

Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
5 Mondial Way
Harlington
Hayes UB3 5AR
Tel 44 181 9901800
Fax 44 181 9901888
http://www.camerondiv.com

Asia Pacific/Middle East


Cooper Cameron (Singapore) Pte. Ltd.
No. 2 Gul Circle, Jurong Industrial Est
Locked Bag Service No. 3
Jurong Town Post Office
Singapore 629560
Republic Of Singapore
Tel 65 8613355
Fax 65 8616197
http://www.camerondiv.com

CAMSERV, CAMRAM, CAMRAM 350, CAMULAR, CAMLAST, U BOP, UII BOP, T BOP, TL BOP, UL BOP,
UM BOP, C BOP, S/QRC BOP, G-2 BOP, D BOP, DL BOP, FLEXPACKER, FLEXPACKER-NR, VBR, VBR-II,
RAMLOCK are trademarks of the Cameron Division of Cooper Cameron Corporation.
Cooper Cameron Corporation, Cameron Division, Printed in USA, 12/00, 0L/10M, WR10001/TC1001

To Cover Page

You might also like