N.P.R.

COLLEGE OF ENGINEERING & TECHNOLOGY

N.P.R. Nagar, Natham - 624 401, Tamil Nadu, India.

AN ISO 9001:2008 Certified Institution

(Approved by AICTE, New Delhi, Affiliated to Anna University, Tiruchirappalli)
No. : 04544 - 291333, 291334, 245422, 245423 & Fax No.: 04544-245392, 93
Website: www.nprcet.org, www.nprcolleges.org E-Mail: nprgc@nprcolleges.org

ISO 9001:2008

PR1204 MANUFACTURING TECHNOLOGY I

III SEMESTER MECHANICAL ENGINEERING

Prepared by
S. Paul Singarayar,

Lecturer
Department of Mechanical Engineering,
N.P.R.College of Engineering and Technology,
Natham.
MT-I/SPS /MECH/NPR

Page 1

PR1204 MANUFACTURING TECHNOLOGY I

LTPC

3003

UNIT I METAL CASTING PROCESSES 9

Sand casting Sand moulds - Type of patterns Pattern materials Pattern allowances Types
of
Moulding sand Properties Core making Methods of Sand testing Moulding machines
Types
of moulding machines - Melting furnaces Working principle of Special casting processes
Shell
investment casting Ceramic mould Lost Wax process Pressure die casting Centrifugal
casting
CO2 process Sand Casting defects.
UNIT II JOINING PROCESSES 9
Fusion welding processes Types of Gas welding Equipments used Flame characteristics
Filler
and Flux materials - Arc welding equipments - Electrodes Coating and specifications
Principles of
Resistance welding Spot/butt Seam Projection welding Percusion welding GS metal arc
welding Flux cored Submerged arc welding Electro slag welding TIG welding Principle
and
application of special welding processes Plasma arc welding Thermit welding Electron
beam
welding Friction welding Diffusion welding Weld defects Brazing Soldering process
Methods and process capabilities Filler materials and fluxes Types of Adhesive bonding.
UNIT III BULK DEFORMATION PROCESSES 9
Hot working and cold working of metals Forging processes Open impression and closed die
forging Characteristics of the process Types of Forging Machines Typical forging
operations
Rolling of metals Types of Rolling mills Flat strip rolling Shape rolling operations
Defects in

MT-I/SPS /MECH/NPR

Page 2

rolled parts Principle of rod and wire drawing Tube drawing Principles of Extrusion
Types of
Extrusion Hot and Cold extrusion Equipments used.
UNIT IV SHEET METAL PROCESSES 9
Sheet metal characteristics Typical shearing operations Bending Drawing operations
Stretch forming operations Formability of sheet metal Test methods Working principle
and application of special forming processes Hydro forming Rubber pad forming Metal
spinning Introduction to Explosive forming Magnetic pulse forming Peen forming Super
plastic forming.

UNIT V MANUFACTURING OF PLASTIC COMPONENTS 9

Types of plastics Characteristics of the forming and shaping processes Moulding of
Thermoplastics Working principles and typical applications of Injection moulding Plunger
and screw machines Compression moulding Transfer moulding Typical industrial
applications Introduction to Blow moulding Rotational moulding Film blowing Extrusion
Thermoforming Bonding of Thermoplastics.
Total: 45
TEXT BOOKS
1. Hajra Choudhury, Elements of Workshop Technology, Vol. I and II, Media Promotors Pvt
Ltd., 2001
2. S.Gowri, P.Hariharan, and A.Suresh Babu, Manufacturing Technology I, Pearson
Education,2008.
REFERENCES
1. B.S. Magendran Parashar & R.K. Mittal, Elements of Manufacturing Processes, Prentice
Hall of India, 2003.
2. P.N. Rao, Manufacturing Technology, 2nd Edition, Tata McGraw-Hill Publishing Limited,
2002.
3. P.C. Sharma, A Text Book of Production Technology, 4th Edition, S. Chand and Company,
2003.

MT-I/SPS /MECH/NPR

Page 3

UNIT I
Metal Casting Process
Manufacturing
Manufacturing in its broadest sense is the process of converting raw materials into useful
products.
It includes
i) Design of the product
ii) Selection of raw materials and
iii) The sequence of processes through which the product will be manufactured.
Casting
Casting is the process of producing metal parts by pouring molten metal into the mould
cavity of the required shape and allowing the metal to solidify. The solidified metal piece is
called as casting.
Types of casting

Casting
Conventional Methods
Green sand mould
Dry sand mould

Unconventional Methods
CO2 Moulding (Strong mould)
Permanent (Metal mould)
Shell Moulding (Thinn mould)
Investment casting (Precision)
Centrifugal (without core)
Continuous Casting (Open)

Advantages
Design flexibility
Reduced costs
Dimensional accuracy
Versatility in production
Disadvantages
Lot of molten metal is wasted in riser & gating
Casting may require machining to remove rough surfaces

Sand Casting
MT-I/SPS /MECH/NPR

Page 4

Sand Casting is simply melting the metal and pouring it into a preformed cavity, called mold,
allowing (the metal to solidify and then breaking up the mold to remove casting. In sand casting
expandable molds are used. So for each casting operation you have to form a new mold.
Most widely used casting process.
Parts ranging in size from small to very large
Production quantities from one to millions
Sand mold is used.
Patterns and Cores
Solid, Split, Match-plate and Cope-and-drag Patterns
Cores achieve the internal surface of the part
Molds
Sand with a mixture of water and bonding clay
Typical mix: 90% sand, 3% water, and 7% clay
to enhance strength and/or permeability
Sand Refractory for high temperature
Size and shape of sand
Small grain size -> better surface finish
Large grain size -> to allow escape of gases during pouring
Irregular grain shapes -> strengthen molds due to interlocking but to reduce permeability
Types of sand
a) Green-sand molds - mixture of sand, clay, and water; Green" means mold contains moisture
at time of pouring.
b) Dry-sand mold - organic binders rather than clay and mold is baked to improve strength
c) Skin-dried mold - drying mold cavity surface of a green-sand
mold to a depth of 10 to 25 mm, using torches or heating
Steps in Sand Casting
The cavity in the sand mold is formed by packing sand around a pattern, separating the
mold into two halves
The mold must also contain gating and riser system
For internal cavity, a core must be included in mold
A new sand mold must be made for each part
1. Pour molten metal into sand mold
2. Allow metal to solidify
3. Break up the mold to remove casting
4. Clean and inspect casting
5. Heat treatment of casting is sometimes required to improve metallurgical properties

MT-I/SPS /MECH/NPR

Page 5

Types of patterns used in sand casting

(a) solid pattern
(b) split pattern
(c) match-plate pattern
(d) cope and drag pattern

Pattern Allowances
Five types of allowances were taken into consideration for various reasons. They are
described as follows:
1.
Shrinkage
allowance
2.
Draft
allowance
3.
Finish
allowance
4.
Shake
allowance
5. Distortion allowance
Desirable Mold Properties and Characteristics
Strength - to maintain shape and resist erosion
Permeability - to allow hot air and gases to pass through voids in sand
Thermal stability - to resist cracking on contact with molten metal
Collapsibility - ability to give way and allow casting to shrink without cracking the casting
Reusability - can sand from broken mold be reused to make other molds.

MT-I/SPS /MECH/NPR

Page 6

Testing of Mould & Core sand

1) Preparation of standard test specimen
2) Mould hardness test
3) Core hardness test
4) Moisture content test on foundry sand
5) Sieve analysis
6) Clay content test
7) Permeability test
8) Compression, shear test
Other Expendable Mold Casting
Shell Molding
Vacuum Molding
Expanded Polystyrene Process
Investment casting
Plaster and Ceramic Mold casting
Steps in shell-molding
Shell-mold casting yields better surface quality and tolerances. The process is described as
follows:
The 2-piece pattern is made of metal (e.g. aluminum or steel), it is heated to between 175C- 370C,
and coated with a lubricant, e.g. silicone spray.
Each heated half-pattern is covered with a mixture of sand and a thermoset resin/epoxy binder.
The binder glues a layer of sand to the pattern, forming a shell. The process may be repeated to get a
thicker shell.
The assembly is baked to cure it.
The patterns are removed, and the two half-shells joined together to form the mold; metal is poured
into the mold.
When the metal solidifies, the shell is broken to get the part.

MT-I/SPS /MECH/NPR

Page 7

Advantages
Smoother cavity surface permits easier flow of molten metal and better surface finish on
casting
Good dimensional accuracy
Machining often not required
Mold collapsibility usually avoids cracks in casting
Can be mechanized for mass production
Disadvantages
More expensive metal pattern
Difficult to justify for small quantities
Investment Casting
Investment casting produces very high surface quality and dimensional accuracy.
Investment casting is commonly used for precision equipment such as surgical equipment,
for complex geometries and for precious metals.
This process is commonly used by artisans to produce highly detailed artwork.
The first step is to produce a pattern or replica of the finished mould. Wax is most
commonly used to form the pattern, although plastic is also used.
Patterns are typically mass-produced by injecting liquid or semi-liquid wax into a
permanent die.
Prototypes, small production runs and specialty projects can also be undertaken by carving
wax models.
Cores are typically unnecessary but can be used for complex internal structures. Rapid
prototyping techniques have been developed to produce expendable patterns.
Several replicas are often attached to a gating system constructed of the same material to
form a tree assembly. In this way multiple castings can be produced in a single pouring.
Casting with expendable mould: Investment Casting

Advantages
Parts of great complexity and intricacy can be cast
Close dimensional control and good surface finish
Wax can usually be recovered for reuse
Additional machining is not normally required - this is a net shape process
Disadvantages
Many processing steps are required
Relatively expensive process
MT-I/SPS /MECH/NPR

Page 8

Plaster Molding
Similar to sand casting except mold is made of plaster of Paris (gypsum - CaSO4-2H2O)
Plaster and water mixture is poured over plastic or metal pattern to make a mold
Advantages
Good dimensional accuracy and surface finish
Capability to make thin cross-sections in casting
Disadvantages
Moisture in plaster mold causes problems:
Mold must be baked to remove moisture
Mold strength is lost when is over-baked, yet moisture content can cause defects in product
Plaster molds cannot stand high temperatures
Permanent Mold Casting
Basic Permanent Mold Process
Uses a metal mold constructed of two sections designed for easy, precise opening and closing
Molds for lower melting point alloys: steel or cast iron and Molds for steel: refractory material,
due to the very high pouring temperatures
Permanent Mold Casting Process
The two halves of the mold are made of metal, usually cast iron, steel, or refractory
alloys. The cavity, including the runners and gating system are machined into the mold
halves.
For hollow parts, either permanent cores (made of metal) or sand-bonded ones may be
used, depending on whether the core can be extracted from the part without damage after
casting.
The surface of the mold is coated with clay or other hard refractory material this
improves the life of the mold. Before molding, the surface is covered with a spray of
graphite or silica, which acts as a lubricant. This has two purposes it improves the flow
of the liquid metal, and it allows the cast part to be withdrawn from the mold more easily.
The process can be automated, and therefore yields high throughput rates.
It produces very good tolerance and surface finish.
It is commonly used for producing pistons used in car engines; gear blanks, cylinder
heads, and other parts made of low melting point metals, e.g. copper, bronze, aluminum,
magnesium, etc.
Advantage
- Good surface finish and dimensional control and Fine grain due to rapid solidification.
Disadvantage
- Simple geometric part, expensive mold.
Example
It is commonly used for producing pistons used in car engines; gear blanks, cylinder
heads, and other parts made of low melting point metals, e.g. copper, bronze, aluminum,
magnesium, etc.
MT-I/SPS /MECH/NPR

Page 9

Basic Permanent Mold Process

Advantages
Good dimensional control and surface finish
More rapid solidification caused by the cold metal mold results in a finer grain structure, so
stronger castings are produced
Limitations
Generally limited to metals of lower melting point
Simple part geometries compared to sand casting because of the need to open the mold
High cost of mold
Due to high mold cost, process is best suited to automated high volume production
Testing of Mould & Core sand
1) Preparation of standard test specimen
2) Mould hardness test
3) Core hardness test
4) Moisture content test on foundry sand
5) Sieve analysis
6) Clay content test
7) Permeability test
8) Compression, shear test
Die Casting
Die casting is a very commonly used type of permanent mold casting process.
It is used for producing many components of home appliances (e.g rice cookers, stoves, fans,
washing and drying machines, fridges), motors, toys and hand-tools
The molten metal is injected into mold cavity (die) under high pressure (7-350MPa).
Pressure maintained during solidification.
Hot Chamber (Pressure of 7 to 35MPa)
The injection system is submerged under the molten metals (low melting point metals such as
lead, zinc, tin and magnesium)
Cold Chamber (Pressure of 14 to 140MPa)
External melting container (in addition aluminum, brass and magnesium)
Molds are made of tool steel, mold steel, maraging steel, tungsten and molybdenum.
Single or multiple cavity
Lubricants and Ejector pins to free the parts
MT-I/SPS /MECH/NPR

Page 10

 Venting holes and passageways in die

Formation of flash that needs to be trimmed
Properties of die-casting
1) Huge numbers of small, light castings can be produced with great accuracy.
2) Little surface finishing is required.
3) Permanent mold (dies can be used over and over)
Advantages
High production, Economical, close tolerance, good surface finish, thin sections, rapid cooling
Hot-Chamber Die Casting
In a hot chamber process (used for Zinc alloys, magnesium) the pressure chamber
connected to the die cavity is filled permanently in the molten metal.
The basic cycle of operation is as follows:
(i)
die is closed and gooseneck cylinder is filled with molten metal;
(ii)
plunger pushes molten metal through gooseneck passage and nozzle and into the die
cavity; metal is held under pressure until it solidifies;
(iii) die opens and cores, if any, are retracted; casting stays in ejector die; plunger returns,
pulling molten metal back through nozzle and gooseneck;
(iv)
ejector pins push casting out of ejector die. As plunger uncovers inlet hole, molten
metal refills gooseneck cylinder.
The hot chamber process is used for metals that (a) have low melting points and (b) do not alloy
with the die material, steel; common examples are tin, zinc, and lead.

Cold Chamber Die Casting

In a cold chamber process, the molten metal is poured into the cold chamber in each
cycle. The operating cycle is
(i)

Die is closed and molten metal is ladled into the cold chamber cylinder;

(ii)

plunger pushes molten metal into die cavity; the metal is held under high pressure
until it solidifies;

(iii)

die opens and plunger follows to push the solidified slug from the cylinder, if
there are cores, they are retracted away;

(iv)

ejector pins push casting off ejector die and plunger returns to original position

MT-I/SPS /MECH/NPR

Page 11

This process is particularly useful for high melting point metals such as Aluminum, and Copper
(and its alloys).

Advantages
Economical for large production quantities
Good dimensional accuracy and surface finish
Thin sections are possible
Rapid cooling provides small grain size and good strength to casting
Disadvantages
Generally limited to metals with low metal points
Part geometry must allow removal from die cavity
Centrifugal casting
Centrifugal casting uses a permanent mold that is rotated about its axis at a speed between
300 to 3000 rpm as the molten metal is poured.
Centrifugal forces cause the metal to be pushed out towards the mold walls, where it
solidifies after cooling.
Centrifugal casting has greater reliability than static castings. They are relatively free from
gas and shrinkage porosity.
Surface treatments such as case carburizing, flame hardening and have to be used when a
wear resistant surface must be combined with a hard tough exterior surface.
One such application is bimetallic pipe consisting of two separate concentric layers of
different alloys/metals bonded together.

Carbon Dioxide Moulding

This sand is mixed with 3 to 5 % sodium silicate liquid base binder in muller for 3 to 4
minutes. Additives such as coal powder, wood flour sea coal, dextrine may be added to improve
its properties.
Aluminium oxide Kaolin clay may also added to the sand .
MT-I/SPS /MECH/NPR

Page 12

 Patterns used in this method may be coated with Zinc of 0.05 mm to 0.13 mm and then
spraying a layer of aluminium or brass of about 0.25 mm thickness for good surface finish and
good results.
Advantages
Operation is speedy since we can use the mould and cores immediately after processing.
Heavy and rush orders
Floor space requirement is less
Semi skilled labour may be used.
Disadvantages
Difficult in reusing the moulding sand.
Process
Sand

Shell mold

Expendable
pattern
Plaster mold
Ceramic mold

Investment
Permanent mold

Die

Centrifugal

Advantages
Wide range of
metals,
sizes,
shapes, low cost
better
accuracy,
finish,
higher
production rate
Wide range of
metals,
sizes,
shapes
complex
shapes,
good surface finish
complex
shapes,
high
accuracy,
good finish
complex
shapes,
excellent finish
good finish, low
porosity,
high
production rate
Excellent
dimensional
accuracy,
high
production rate
Large cylindrical
parts, good quality

Disadvantages
Examples
poor finish, wide engine
blocks,
tolerance
cylinder heads
limited part size

connecting
rods,
gear housings

patterns have low cylinder

heads,
strength
brake components
non-ferrous metals, prototypes
of
low production rate mechanical parts
small sizes
impellers, injection
mold tooling
small
parts, jewellery
expensive
Costly
mold, gears,
simpler shapes only housings

gear

costly dies, small precision

gears,
parts,
camera bodies, car
non-ferrous metals wheels
Expensive, limited pipes,
shapes
flywheels

boilers,

Furnaces
Cupola Furnace
A continuous flow of iron emerges from the bottom of the furnace.
Depending on the size of the furnace, the flow rate can be as high as 100 tonnes per hour.
At the metal melts it is refined to some extent, which removes contaminants. This makes this
process more suitable than electric furnaces for dirty charges.
MT-I/SPS /MECH/NPR

Page 13

Direct Fuel-fired furnace

Crucible Furnace
Electric-arc Furnace
Induction Furnace
Pouring with ladle
Solidification watch for oxidation
Trimming, surface cleaning, repair and heat treat, inspection

Three types: (a) lift-out crucible, (b) stationary pot, from which molten metal must be ladled, and
(c) tilting-pot furnace

MT-I/SPS /MECH/NPR

Page 14

Induction Furnace:

Casting defects
Defects may occur due to one or more of the following reasons:
Fault in design of casting pattern
Fault in design on mold and core
Fault in design of gating system and riser
Improper choice of moulding sand
Improper metal composition
Inadequate melting temperature and rate of pouring
Some common defects in castings:
a) Misruns b) Cold Shut c) Cold Shot d) Shrinkage Cavity e) Microporosity f) Hot Tearing
Misruns:
a)Misruns
It is a casting that has solidified before completely filling the mold cavity.
Typical causes include
1) Fluidity of the molten metal is insufficient,
2) Pouring Temperature is too low,
3) Pouring is done too slowly and/or
4) Cross section of the mold cavity is too thin.
b) Cold Shut
A cold shut occurs when two portion of the metal flow together, but there is lack of
fusion between them due to premature freezing, Its causes are similar to those of a Misruns.
c) Cold Shots
When splattering occurs during pouring, solid globules of the metal are formed that
become entrapped in the casting. Poring procedures and gating system designs that avoid
splattering can prevent these defects.
d) Shrinkage Cavity
This defects is a depression in the surface or an internal void in the casting caused by
solidification shrinkage that restricts the amount of the molten metal available in the last region
to freeze.
e) Microporosity
This refers to a network of a small voids distributed throughout the casting caused by
localized solidification shrinkage of the final molten metal in the dendritic structure.
f) Hot Tearing
This defect, also called hot cracking, occurs when the casting is restrained or early stages
of cooling after solidification.
MT-I/SPS /MECH/NPR

Page 15

QUESTION BANK
Manufacturing Technology-I
UNIT- I
PART A (2 Marks)
1. How special forming process is defined?
1. What is metal spinning process? Define casting?
2. When do you make core (or) what is function of core in moulding sand?
3. Explain the core making process?
4. Mention the specific advantages of carbon di oxide process?
5. Write the composition of good moulding sand?
6. What are chaplets?
7. List the factors to be considered in the choice of metal melting furnace?
8. What are the reasons for the casting defects of cold shuts and misrun?
9. Name four different casting defects.
10. How casting defects are identified?
Part-B (16 Marks)
1. What are the pattern allowances? Explain briefly each. (16)
2. Discuss the properties of moulding sand. (16)
3. Explain the CO2 process of core making state its advantages and applications. (16)
4. State the different type of mould. Write a short note on Green sand mould and shell
moulding (16)
5. Write a neat sketch of a cupola, Explain its operate. (16)
6. Explain with a simple sketch how metal is melted in a Electric arc furnace. (16)
7. What are the different types of furnace used in foundry? Describe in detail with neat
sketches any one of them. (16)
8. Explain briefly the various moulding method used in foundries. (16)
9. Enumerate the continuous casting defects and suggest suitable remedies. (16)
10. Explain the various non destructive inspection methods of cast products. (16)

MT-I/SPS /MECH/NPR

Page 16

Unit II JOINING PROCESSES

Welding
Welding is a materials joining process which produces coalescence of materials by
heating them to suitable temperatures with or without the application of pressure or by the
application of pressure alone, and with or without the use of filler material.
Welding is used for making permanent joints.
It is used in the manufacture of automobile bodies, aircraft frames, railway wagons,
machine frames, structural works, tanks, furniture, boilers, general repair work and ship building.
Classification of welding processes
(i) Arc welding

Carbon arc
Metal arc
Metal inert gas
Tungsten inert gas
Plasma arc
Submerged arc
Electro-slag

(ii) Gas Welding

Oxy-acetylene
Air-acetylene
Oxy-hydrogen

iii) Resistance Welding

Butt
Spot
Seam
Projection
Percussion
(iv)Thermit Welding

MT-I/SPS /MECH/NPR

Page 17

(v)Solid State Welding

Friction
Ultrasonic
Diffusion
Explosive
(vi) Newer Welding
Electron-beam
Laser
(vii)Related Process
Oxy-acetylene cutting
Arc cutting
Hard facing
Brazing
Soldering
Welding practice & equipment
STEPS :
Prepare the edges to be joined and maintain the proper position
Open the acetylene valve and ignite the gas at tip of the torch
Hold the torch at about 45deg to the work piece plane
Inner flame near the work piece and filler rod at about 30 40 deg
Touch filler rod at the joint and control the movement according to the flow of the
material
Two Basic Types of AW Electrodes
Consumable consumed during welding process
Source of filler metal in arc welding
Nonconsumable not consumed during welding process
Filler metal must be added separately
Consumable Electrodes
Forms of consumable electrodes
Welding rods (a.k.a. sticks) are 9 to 18 inches and 3/8 inch or less in diameter and
must be changed frequently
Weld wire can be continuously fed from spools with long lengths of wire,
avoiding frequent interruptions
In both rod and wire forms, electrode is consumed by arc and added to weld joint as filler metal.
Nonconsumable Electrodes
Made of tungsten which resists melting
Gradually depleted during welding (vaporization is principal mechanism)
Any filler metal must be supplied by a separate wire fed into weld pool
MT-I/SPS /MECH/NPR

Page 18

Flux
A substance that prevents formation of oxides and other contaminants in welding, or
dissolves them and facilitates removal
Provides protective atmosphere for welding
Stabilizes arc
Reduces spattering
Arc welding
Uses an electric arc to coalesce metals
Arc welding is the most common method of welding metals
Electricity travels from electrode to base metal to ground
Arc welding Equipments
A welding generator (D.C.) or Transformer (A.C.)
Two cables- one for work and one for electrode
Electrode holder
Electrode
Protective shield
Gloves
Wire brush
Chipping hammer
Goggles

Advantages
Most efficient way to join metals
Lowest-cost joining method
Affords lighter weight through better utilization of materials
Joins all commercial metals
Provides design flexibility
Disadvantages
Manually applied, therefore high labor cost.
Need high energy causing danger
Not convenient for disassembly.
Defects are hard to detect at joints.

MT-I/SPS /MECH/NPR

Page 19

GAS WELDING
Sound weld is obtained by selecting proper size of flame, filler material and method of
moving torch
The temperature generated during the process is 33000c.
When the metal is fused, oxygen from the atmosphere and the torch combines with
molten metal and forms oxides, results defective weld
Fluxes are added to the welded metal to remove oxides
Common fluxes used are made of sodium, potassium. Lithium and borax.
Flux can be applied as paste, powder, liquid. solid coating or gas.
GAS WELDING EQUIPMENT
1.Gas Cylinders
Pressure
Oxygen 125 kg/cm2
Acetylene 16 kg/cm2
2. Regulators
Working pressure of oxygen 1 kg/cm2
Working pressure of acetylene 0.15 kg/cm2
Working pressure varies depends upon the thickness of the work pieces welded.
3. Pressure Gauges
4. Hoses
5. Welding torch
6. Check valve
7. Non return valve
Types of Flames

Oxygen is turned on, flame immediately changes into a long white inner area (Feather)
surrounded by a transparent blue envelope is called Carburizing flame (30000c)
Addition of little more oxygen give a bright whitish cone surrounded by the transparent
blue envelope is called Neutral flame (It has a balance of fuel gas and oxygen) (32000c)
Used for welding steels, aluminium, copper and cast iron
If more oxygen is added, the cone becomes darker and more pointed, while the envelope
becomes shorter and more fierce is called Oxidizing flame
Has the highest temperature about 34000c
Used for welding brass and brazing operation

MT-I/SPS /MECH/NPR

Page 20

Three basic types of oxyacetylene flames used in oxyfuel-gas welding and cutting
operations:
(a) neutral flame; (b) oxidizing flame; (c) carburizing, or reducing flame.
Fusion welding processes
Definition : Fusion Welding is defined as melting together and coalescing materials by
means of heat
Energy is supplied by thermal or electrical means
Fusion welds made without filler metals are known as autogenous welds
Filler Metals:
Additional material to weld the weld zone
Available as rod or wire
They can be used bare or coated with flux
The purpose of the flux is to retard the
MT-I/SPS /MECH/NPR

Page 21

Shielded metal arc welding process

An electric arc is generated between a coated electrode and the parent metal
The coated electrode carries the electric current to form the arc, produces a gas to control
the atmosphere and provides filler metal for the weld bead
Electric current may be AC or DC. If the current is DC, the polarity will affect the weld
size and application

Process

Intense heat at the arc melts the tip of the electrode

Tiny drops of metal enter the arc stream and are deposited on the parent metal
As molten metal is deposited, a slag forms over the bead which serves as an
insulation against air contaminants during cooling
After a weld pass is allowed the cool, the oxide layer is removed by a chipping
hammer and then cleaned with a wirebrush before the next pass.

Fig : Schematic illustration of the shielded metal-arc welding process. About 50% of all largescale industrial welding operations use this process.

Fig : Schematic illustration of the shielded metal-arc welding process ( also known as stick
welding, because the electrode is in the shape of a stick).
Submerged arc welding
Weld arc is shielded by a granular flux , consisting of silica, lime, manganese oxide,
calcium fluoride and other compounds.
Flux is fed into the weld zone by gravity flow through nozzle
MT-I/SPS /MECH/NPR

Page 22

Thick layer of flux covers molten metal

Flux acts as a thermal insulator ,promoting deep penetration of heat into the work piece
Consumable electrode is a coil of bare round wire fed automatically through a tube
Power is supplied by 3-phase or 2-phase power lines

Fig : Schematic illustration of the submerged-arc welding process and equipment. The unfused
flux is recovered and reused.
Gas metal arc welding
GMAW is a metal inert gas welding (MIG)
Weld area shielded by an effectively inert atmosphere of argon,helium,carbon
dioxide,various other gas mixtures
Metal can be transferred by 3 methods :
Spray transfer
Globular transfer
Short circuiting
Process capabilities
GMAV process is suitable for welding a variety of ferrous and non-ferrous metals
Process is versatile ,rapid, economical, welding productivity is double that of SMAW
Flux cored arc welding
Flux cored arc welding is similar to a gas metal arc welding
Electrode is tubular in shape and is filled with flux
Cored electrodes produce more stable arc improve weld contour and produce better
mechanical properties
Flux is more flexible than others

MT-I/SPS /MECH/NPR

Page 23

Fig : Schematic illustration of the flux-cored arc-welding process. This operation is similar to gas
metal-arc welding.
Electro gas Welding
EGW is welding the edges of sections vertically in one pass with the pieces placed edge
to edge
Similar to Electro gas welding
Weld metal is deposited into weld cavity between the two pieces to be joined
Difference is Arc is started between electrode tip and bottom part of the part to be welded
Flux added first and then melted by the heat on the arc
Molten slag reaches the tip of the electrode and the arc is extinguished
Heat is then continuously produced by electrical resistance of the molten slag
Single or multiple solid as well as flux-cored electrodes may be used
Process capabilities
Weld thickness ranges from 12mm to 75mm
Metals welded are steels, titanium, aluminum alloys
Applications are construction of bridges, pressure vessels, thick walled and large
diameter pipes, storage tanks and ships.

Fig : Schematic illustration of the electrogas welding process

Brazing
MT-I/SPS /MECH/NPR

Page 24

It is a low temperature joining process. It is performed at temperatures above 840 F and it

generally affords strengths comparable to those of the metal which it joins. It is low temperature
in that it is done below the melting point of the base metal. It is achieved by diffusion without
fusion (melting) of the base
Brazing can be classified as
Torch brazing
Dip brazing
Furnace brazing
Induction brazing

Advantages
Dissimilar metals which canot be welded can be joined by brazing
Very thin metals can be joined
Metals with different thickness can be joined easily
In brazing thermal stresses are not produced in the work piece. Hence there is no
distortion
Using this process, carbides tips are brazed on the steel tool holders
Disadvantages
Brazed joints have lesser strength compared to welding
Joint preparation cost is more
Can be used for thin sheet metal sections
Soldering
It is a low temperature joining process. It is performed at temperatures below 840F for
joining.
Soldering is used for,
Sealing, as in automotive radiators or tin cans
Electrical Connections
Joining thermally sensitive components
Joining dissimilar metals

MT-I/SPS /MECH/NPR

Page 25

Inert Gas Welding

For materials such as Al or Ti which quickly form oxide layers, a method to place an inert
atmosphere around the weld puddle had to be developed
Metal Inert Gas (MIG)
Uses a consumable electrode (filler wire made of the base metal)
Inert gas is typically Argon
Gas Tungsten Arc Welding (GTAW)
Uses a non-consumable tungsten electrode and an inert gas for arc shielding
Melting point of tungsten = 3410 C (6170 F)
A.k.a. Tungsten Inert Gas (TIG) welding
In Europe, called "WIG welding"
Used with or without a filler metal
When filler metal used, it is added to weld pool from separate rod or wire
Applications: aluminum and stainless steel most common

Advantages
High quality welds for suitable applications
No spatter because no filler metal through arc
Little or no post-weld cleaning because no flux
Disadvantages
Generally slower and more costly than consumable electrode AW processes
Plasma Arc Welding (PAW)
Special form of GTAW in which a constricted plasma arc is directed at weld area
MT-I/SPS /MECH/NPR

Page 26

Tungsten electrode is contained in a nozzle that focuses a high velocity stream of inert
gas (argon) into arc region to form a high velocity, intensely hot plasma arc stream
Temperatures in PAW reach 28,000 C (50,000 F), due to constriction of arc, producing a
plasma jet of small diameter and very high energy density

Resistance Welding (RW)

A group of fusion welding processes that use a combination of heat and pressure to
accomplish coalescence
Heat generated by electrical resistance to current flow at junction to be welded
Principal RW process is resistance spot welding (RSW)

Fig: Resistance welding, showing the components in spot welding, the main process in the
RW group.
Components in Resistance Spot Welding
Parts to be welded (usually sheet metal)
Two opposing electrodes
Means of applying pressure to squeeze parts between electrodes
Power supply from which a controlled current can be applied for a specified time
duration
Advantages
No filler metal required
MT-I/SPS /MECH/NPR

Page 27

High production rates possible

Lends itself to mechanization and automation
Lower operator skill level than for arc welding
Good repeatability and reliability

Disadvantages
High initial equipment cost
Limited to lap joints for most RW processes
Resistance Seam Welding

Electron Beam Welding (EBW)

Fusion welding process in which heat for welding is provided by a highly-focused,
high-intensity stream of electrons striking work surface
Electron beam gun operates at:
High voltage (e.g., 10 to 150 kV typical) to accelerate electrons
Beam currents are low (measured in milliamps)
Power in EBW not exceptional, but power density is
Advantages
High-quality welds, deep and narrow profiles
Limited heat affected zone, low thermal distortion
High welding speeds
No flux or shielding gases needed
Disadvantages
High equipment cost
Precise joint preparation & alignment required
Vacuum chamber required
Safety concern: EBW generates x-rays
Laser Beam Welding (LBW)
Fusion welding process in which coalescence is achieved by energy of a highly
concentrated, coherent light beam focused on joint
Laser = "light amplification by stimulated emission of radiation"
LBW normally performed with shielding gases to prevent oxidation
MT-I/SPS /MECH/NPR

Page 28

Filler metal not usually added

High power density in small area, so LBW often used for small parts

Comparison: LBW vs. EBW

No vacuum chamber required for LBW

No x-rays emitted in LBW
Laser beams can be focused and directed by optical lenses and mirrors
LBW not capable of the deep welds and high depth-to-width ratios of EBW
Maximum LBW depth = ~ 19 mm (3/4 in), whereas EBW depths = 50 mm (2 in)

Thermit Welding (TW)

FW process in which heat for coalescence is produced by superheated molten metal from the
chemical reaction of thermite
Thermite = mixture of Al and Fe3O4 fine powders that produce an exothermic reaction
when ignited
Also used for incendiary bombs
Filler metal obtained from liquid metal
Process used for joining, but has more in common with casting than welding

Fig: Thermit welding: (1) Thermit ignited; (2) crucible tapped, superheated metal flows into
mold; (3) metal solidifies to produce weld joint.
Applications
Joining of railroad rails
Repair of cracks in large steel castings and forgings
Weld surface is often smooth enough that no finishing is required
Diffusion Welding (DFW)
SSW process uses heat and pressure, usually in a controlled atmosphere, with sufficient time
for diffusion and coalescence to occur
Temperatures 0.5 Tm
Plastic deformation at surfaces is minimal
Primary coalescence mechanism is solid state diffusion
Limitation: time required for diffusion can range from seconds to hours
MT-I/SPS /MECH/NPR

Page 29

Applications
Joining of high-strength and refractory metals in aerospace and nuclear industries
Can be used to join either similar and dissimilar metals
For joining dissimilar metals, a filler layer of different metal is often sandwiched between
base metals to promote diffusion
Friction Welding (FRW)
SSW process in which coalescence is achieved by frictional heat combined with pressure
When properly carried out, no melting occurs at faying surfaces
No filler metal, flux, or shielding gases normally used
Process yields a narrow HAZ
Can be used to join dissimilar metals
Widely used commercial process, amenable to automation and mass production

Fig: Friction welding (FRW): (1) rotating part, no contact; (2) parts brought into contact to
generate friction heat; (3) rotation stopped and axial pressure applied; and (4) weld created.
Applications
Shafts and tubular parts
Industries: automotive, aircraft, farm equipment, petroleum and natural gas
Limitations
At least one of the parts must be rotational
Flash must usually be removed
Upsetting reduces the part lengths (which must be taken into consideration in product
design)
Weld Defects
Undercuts/Overlaps
Grain Growth
A wide T will exist between base metal and HAZ. Preheating and cooling
methods will affect the brittleness of the metal in this region
Blowholes
MT-I/SPS /MECH/NPR

Page 30

Are cavities caused by gas entrapment during the solidification of the weld
puddle. Prevented by proper weld technique (even temperature and speed)
Inclusions
Impurities or foreign substances which are forced into the weld puddle during the
welding process. Has the same effect as a crack. Prevented by proper technique/cleanliness.
Segregation
Condition where some regions of the metal are enriched with an alloy ingredient and
others arent. Can be prevented by proper heat treatment and cooling.
Porosity
The formation of tiny pinholes generated by atmospheric contamination.
Prevented by keeping a protective shield over the molten weld puddle.

UNIT - 2
PART A (2 Marks)
1. Define welding process.
2. Define fusion welding .
3. What are different method of welding you know ?
4. Define arc crater.
5. Mention any two advantages of D .C and A. C welding.
6. What do you under stand by straight polarity?
7. When is the straight polarity used for arc welding?
8. What is the purpose of coating on an arc welding electrode?
9. What are the two main different of consumable electrode and non consumable electrode?
10. How does MIG welding differ from TIG welding?
11. What is the main different between upset butt welding and flash butt welding ?
12. What are the various types of flame?
13. Define plasma arc welding ?
Part-B (16 Marks)
1. Explain the method of laser beam welding and give their applications (16)
2. Explain the method of electron beam welding and given their applications (16)
3. Describe plasma Arc welding and given their applications. (16)
4. Describe and explain Ultrasonic welding and give their applications. (16)
5. Explain Thermit welding and given their applications. (16)
6. What is frication welding? give their advantage and limitations. (16)
MT-I/SPS /MECH/NPR

Page 31

7. Distinguish between brazing, soldering and welding. (16)

8. Write briefly on testing and inspection of welding. (16)
9. Describe brazing process and its types. (16)
10. What are the advantages and disadvantages and limitations of adhesive bonding. (16)

MT-I/SPS /MECH/NPR

Page 32

UNIT III BULK DEFORMATION PROCESSES

Cold working
The process is usually performed at room temperature, but mildly elevated temperatures
may be used to provide increased ductility and reduced strength
For example: Deforming lead at room temperature is a hot working process because the
recrystallization temperature of lead is about room temperature.
Effects of Cold Working
Deformation using cold working results in

Higher stiffness, and strength, but

Reduced malleability and ductility of the metal.

Anisotropy
Advantages
No heating is required
Strength, fatigue and wear properties are improved through strain hardening
Superior dimensional control is achieved, so little, if any, secondary machining is
required
Better surface finish is obtained
Products possess better reproducibility and interchangeability
Directional properties can be imparted
Contamination problems are minimized
Disadvantages
Higher forces are required to initiate and complete the deformation
Less ductility is available
Intermediate anneals may be required to compensate for the loss of ductility that
accompanies strain hardening
Heavier and more powerful equipment is required
Metal surfaces must be clean and scale-free
Imparted directional properties may be detrimental
Undesirable residual stresses may be produced
Hot working
Hot working is the deformation that is carried out above the recrystallization temperature.

Effects of hot working

At high temperature, scaling and oxidation exist. Scaling and oxidation produce
undesirable surface finish. Most ferrous metals needs to be cold worked after hot working in
order to improve the surface finish.
The amount of force needed to perform hot working is less than that for cold work.
The mechanical properties of the material remain unchanged during hot working.
MT-I/SPS /MECH/NPR

Page 33

 The metal usually experiences a decrease in yield strength when hot worked. Therefore,
it is possible to hot work the metal without causing any fracture.
Quenching is the sudden immersion of a heated metal into cold water or oil. It is used to
make the metal very hard. To reverse the effects of quenching, tempering is used (reheated of the
metal for a period of time)
To reverse the process of quenching, tempering is used, which is the reheat of the metal.
Cold-working Processes
Squeezing
Bending
Shearing
Drawing
Presses
Classifications of Squeezing Processes

Rolling
Cold Forging
Sizing
Staking
Staking
Coining
Burnishing
Extrusion
Peening
Hubbing
Riveting
Thread Rolling

ROLLING
Process used in sheets, strips, bars, and rods to obtain products that have smooth surfaces
and accurate dimensions; most cold-rolling is performed on four-high or cluster-type rolling
mills

Flat Rolling

MT-I/SPS /MECH/NPR

Page 34

A sheet or block or strip stock is introduced between rollers and then compressed and
squeezed. Thickness is reduced. The amount of strain (deformation) introduced determines the
hardness, strength and other material properties of the finished product.
Used to produce sheet metals predominantly
Swaging
Process that reduces/increases the diameter, tapers, rods or points round bars or tubes by
external hammering

Cold Forging
Process in which slugs of material are squeezed into shaped die cavities to produce
finished parts of precise shape and size.

Extrusion
Process which is commonly used to make collapsible tubes such as toothpaste tubes, cans
usually using soft materials such as aluminum, lead, tin. Usually a small shot of solid material is
placed in the die and is impacted by a ram, which causes cold flow in the material.

MT-I/SPS /MECH/NPR

Page 35

Sizing
Process of squeezing all or selected areas of forgings, ductile castings, or powder
metallurgy products to achieve a desired thickness or precision
Riveting
Process where a head is formed on the shrank end of a fastener to permanently join sheets or
plates of material;
Staking
Process of permanently joining parts together when one part protrudes through a hole in
the other; a shaped punch is driven into the end of the protruding piece where a deformation is
formed causing a radial expansion, mechanically locking the two pieces together

MT-I/SPS /MECH/NPR

Page 36

Coining
Process where metal while it is confined in a closed set of dies; used to produce coins,
medals, and other products where exact size and fine details are required, and thickness varies
about a well-defined average

Peening
Process where the surface of the metal is blasted by shot pellets; the mechanical working
of surfaces by repeated blows of impelled shot or a round-nose tool
Burnishing
Process by which a smooth hard tools is rubbed on the metal surface and flattens the high
spots by applying compressive force and plastically flowing the material

Hubbing
Process is used to form recessed cavities in various types of female tooling dies. This is
often used to make plastic extrusion dies in an economical manner

MT-I/SPS /MECH/NPR

Page 37

Thread Rolling
Process is used for making external threads; in this process, a die, which is a hardened
tool with the thread profile, is pressed on to a rotating workpiece

The Presses
There are many kinds of machines
Hydraulic presses
Mechanical presses
C frame
Straight sided
Others

C-frame mechanical press

MT-I/SPS /MECH/NPR

Page 38

Types of Forging Presses

Impression Die Forging

MT-I/SPS /MECH/NPR

Page 39

Forging operations
Forging is a process in which the workpiece is shaped by compressive forces applied through
various dies and tools. It is one of the oldest metalworking operations. Most forgings require a
set of dies and a press or a forging hammer.
A Forged metal can result in the following: Decrease in height, increase in section - open die forging
Increase length, decrease cross-section, called drawing out.
Decrease length, increase in cross-section on a portion of the length upsetting
Change length, change cross-section, by squeezing in closed impression
dies - closed die forging. This results in favorable grain flow for strong
parts
Types of forging
Closed/impression die forging
Electro-upsetting
Forward extrusion
Backward extrusion
Radial forging
Hobbing
Isothermal forging
Open-die forgig
Upsetting
Nosing
Coining
Commonly used materials include
Ferrous materials: low carbon steels
Nonferrous materials: copper, aluminum and their alloys
Open-Die Forging
Open-die forging is a hot forging process in which metal is shaped by hammering or
pressing between flat or simple contoured dies.

Equipment. Hydraulic presses, hammers.

Materials. Carbon and alloy steels, aluminum alloys, copper alloys, titanium alloys, all
forgeable materials.
MT-I/SPS /MECH/NPR

Page 40

Process Variations. Slab forging, shaft forging, mandrel forging, ring forging, upsetting
between flat or curved dies, drawing out.
Application. Forging ingots, large and bulky forgings, preforms for finished forgings.
Closed Die Forging
In this process, a billet is formed (hot) in dies (usually with two halves) such that the flow
of metal from the die cavity is restricted. The excess material is extruded through a restrictive
narrow gap and appears as flash around the forging at the die parting line.
Equipment. Anvil and counterblow hammers, hydraulic, mechanical, and screw presses.
Materials. Carbon and alloy steels, aluminum alloys, copper alloys, magnesium alloys,
beryllium, stainless steels, nickel alloys, titanium and titanium alloys, iron and nickel and cobalt
super alloys.
Process Variations. Closed-die forging with lateral flash, closed-die forging with longitudinal
flash, closed-die forging without flash.
Application. Production of forgings for automobiles, trucks, tractors, off-highway equipment,
aircraft, railroad and mining equipment, general mechanical industry, and energy-related
engineering production.
Forward extrusion
Forward extrusion reduces slug diameter and increases its length to produce parts such as
stepped shafts and cylinders.

backward extrusion
In backward extrusion, the steel flows back and around the descending punch to form
cup-shaped pieces.

Upsetting, or heading
Upsetting, or heading, a common technique for making fasteners, gathers steel in the
head and other sections along the length of the part.

MT-I/SPS /MECH/NPR

Page 41

Electro-Upsetting (Fig. 2.4)

Electro-upsetting is the hot forging process of gathering a large amount of material at one
end of a round bar by heating the bar end electrically and pushing it against a flat anvil or shaped
die cavity.

A, anvil electrode; B, gripping electrode; C, workpiece; D, upset end of workpiece

Equipment. Electric upsetters.
Materials. Carbon and alloy steels, titanium.
Application. Preforms for finished forgings.
Hobbing
Hobbing is the process of indenting or coining an impression into a cold orhot die block
by pressing with a punch.
Equipment. Hydraulic presses, hammers.
Materials. Carbon and alloy steels.
Process Variations. Die hobbing, die typing.
Application. Manufacture of dies and molds with relatively shallow impressions.
Nosing
Nosing is a hot or cold forging process in which the open end of a shell or tubular
component is closed by axial pressing with a shaped die.
Equipment. Mechanical and hydraulic presses, hammers.
Materials. Carbon and alloy steels, aluminum alloys, titanium alloys.
Process Variations. Tube sinking, tube expanding.
Applications. Forging of open ends of ammunition shells; forging of gas pressure containers.

MT-I/SPS /MECH/NPR

Page 42

Coining
In sheet metal working, coining is used to form indentations and raised sections in the
part. During the process, metal is intentionally thinned or thickened to achieve the required
indentations or raised sections. It is widely used for lettering on sheet metal or components such
as coins. Bottoming is a type of coining process where bottoming pressure causes reduction in
thickness at the bending area.

Ironing
Ironing is the process of smoothing and thinning the wall of a shell or cup (cold or hot)
by forcing the shell through a die with a punch.

Equipment. Mechanical presses and hydraulic presses.

Materials. Carbon and alloy steels, aluminum and aluminum alloys, titanium alloys.
Applications. Shells and cups for various
MT-I/SPS /MECH/NPR

Page 43

Swaging
Uses hammering dies to decrease the diameter of the part

Defects in Forging

Extrusion and Drawing Processes

MT-I/SPS /MECH/NPR

Page 44

Extrusion
Process by which long straight metal parts can be produced.
Cross-sections that can be produced vary from solid round, rectangular, to L shapes, T
Shapes, tubes and many other different types
Done by squeezing metal in a closed cavity through a die using either a mechanical or
hydraulic press.
Extrusion produces compressive and shear forces in the stock.
No tension is produced, which makes high deformation possible without tearing the metal.
Can be done Hot or cold
Drawing
Section of material reduced by pulling through die.
Similar to extrusion except material is under TENSILE force since it is pulled through the die
Various types of sections: - round, square, profiles
Tube Drawing
Utilizes a special tool called a MANDREL is inserted in a tube hollow section to draw a
seamless tube
Mandrel and die reduce both the tube's outside diameter and its wall thickness.
The mandrel also makes the tube's inside surface smoother

UNIT-III
Part-A (2 Marks)
1. Define cold working of metals
2. Define re crystallization temperature
3. Give some examples for mechanical working of metals
4. Define forging
5. Give some basic forging operations
6. Define extrusion ratio
7. Define tube drawing
8. Define degree of drawing
9. Name four different press-working operations
10. What are the defects in forging operations?
Part-B (16 Marks)
1. Explain the hot working and cold working with suitable examples. (16)
2. Define rolling and discuss according to the classification. (16)
3. Discuss the various forging operations and its types. (16)
MT-I/SPS /MECH/NPR

Page 45

4. (i)Give the advantage of press forging over drop forging. (8)

(ii)Discuss closed die forging and open die forging. (8)
5. What are the defects in forgings? Explain it. (16)
6. How the pipe and tubes are manufacturing? (16)
7. Define drawing and discuss the classification with neat sketch. (16)
8. What are the defects in rolled parts? (16)
9. Explain the flat strip rolling process. (16)
10. Explain the shape rolling process. (16)

MT-I/SPS /MECH/NPR

Page 46

UNIT IV SHEET METAL PROCESSES

Sheet Metal Forming
Involves methods in which sheet metal is cut into required dimensions and shape; and/or
forming by stamping, drawing, or pressing to the final shape
A special class of metal forming where the thickness of the piece of material is small
compared to the other dimensions
Cutting into shape involve shear forces
Forming Processes involve tensile stresses
The Major operations of sheet Metal are;
1) Shearing,
2) Bending,
3) Drawing and
4) Squeezing
Shearing
The mechanical cutting of materials without the information of chips or the use of
burning or melting for straight cutting blades: shearing for curved blades: blanking, piercing,
notching, trimming

Classifications of Shearing Processes

Slitting
Piercing
Blanking
Notching
Shaving
Trimming
Cutoff
Dinking
Slitting
MT-I/SPS /MECH/NPR

Page 47

shearing process used to cut rolls of sheet metal into several rolls of narrower width
used to cut a wide coil of metal into a number of narrower coils as the main coil is moved
through the slitter.

Blanking
during which a metal workpiece is removed from the primary metal strip or sheet when it is
punched.

Piercing

Notching
same as piercing
- edge of the strip or black forms part of the punch-out perimeter
Nibbling
Produces a series of overlapping slits/notches
Shaving
MT-I/SPS /MECH/NPR

Page 48

finishing operation in which a small amount of metal is sheared away from the edge of an
already blanked part
- can be used to produce a smoother edge
Trimming

Cutoff
Punch and die operation used to separate a stamping or other product from a strip or stock

Dinking
Used to blank shapes from low-strength materials such as rubber, fiber and cloth
Bending
The plastic deformation of metals about a linear axis with little or no change in the
surface area.
The purpose of bending is to form sheet metal along a straight line
Springback
The elastic recovery of the material after unloading of the tools

MT-I/SPS /MECH/NPR

Page 49

To compensate with the unbending action of the springback, the metal should be slightly
overbent.
Classifications of Bending Processes
Angle
Straightening
Roll Forming
Draw and Compression
Seaming
Roll
Flanging
Roll Bending
Bending where plates, sheets and rolled shapes can be bent to a desired curvature
Roll bending toll can bend plate up to 6 inches thick
Angle Bending

Drawing Bending
Workpiece is clamped against a bending form and the entire assemble rotates to draw the
workpiece across a stationary tool

MT-I/SPS /MECH/NPR

Page 50

Compression Bending
The bending form remains stationary and the pressure tool moves along the workpiece

Roll Forming
Involves the progressive bending of metal strip as it passes through a series of forming rolls
Any material that can be bent can be roll- formed
Seaming
- bending operation that can be used to join the ends of sheet metal to form containers such as
cans, pails and drums
Flanging
-the process of rolling on sheet metal in essentially the same manner as seaming

Straightening
also known as flattening
opposite of bending
Drawing- Stretch forming
Sheet metal clamped along its edges and stretched over a die or form block in required
directions.

MT-I/SPS /MECH/NPR

Page 51

Fig: Schematic illustration of a stretch forming process. Aluminum skins for aircraft can be
made by this process
Special Forming Process
There are a great variety of sheet metal forming methods, mainly using shear and tensile
forces in the operation.
Progressive forming
Rubber hydroforming
Bending and contouring
Spinning processes
Explosive forming
Shearing and blanking
Stretch forming
Deep drawing
Progressive forming
Punches and dies are designed so that successive stages in the forming of the part are carried
out in the same die on each stroke of the press.
Progressive dies are also known as multi-stage dies.
Rubber forming
In bending and embossing of sheet metal, the female die is replaced with rubber pad
Hydro-form (or) fluid forming process
The pressure over rubber membrane is controlled throughout the forming cycle ,with max
pressure up to 100 Mpi
As a result the friction at the punch-cup interface increases, this increase reduces the
longitudinal tensile stresses in the cup and delays fracture
Spinning
Shaping thin sheets by pressing them against a form with a blunt tool to force the material
into a desired form
Conventional spinning
A circular blank if flat or performed sheet metal hold against a mandrel and rotated ,while a rigid
metal is held against a mandrel and rotated ,wile a rigid tool deforms and shapes the material
over the mandrel.
Shear Spinning
MT-I/SPS /MECH/NPR

Page 52

Fig .(a) Schematic illustration of the conventional spinning process (b) Types of parts
conventionally spun.
All parts are antisymmetric
Known as power spinning, flow turning, hydro-spinning, and spin forging
Produces axisymmetric conical or curvilinear shape
Single rollers and two rollers can be used
It has less wastage of material
Typical products are rocketmotor casing and missile nose cones.

Tube spinning
Thickness of cylindrical parts are reduced by spinning them on a cylindrical mandrel rollers
Parts can be spun in either direction
Large tensile elongation up to 2000 % are obtained within certain temperature ranges and at
low strain rates.

MT-I/SPS /MECH/NPR

Page 53

Advantages
Lower strength is required and less tooling costs
Complex shapes with close tolerances can be made
Weight and material savings
Little or no residual stress occurs in the formed parts
Disadvantages
Materials must not be super elastic at service temperatures
Longer cycle times
Explosive forming
Explosive energy used s metal forming
Sheet-metal blank is clamped over a die
Assembly is immersed in a tank with water
Rapid conversion of explosive charge into gas generates a shock wave .the pressure of this
wave is sufficient to form sheet metals

Beading
The periphery if the sheet metal is bent into the cavity of a die

MT-I/SPS /MECH/NPR

Page 54

Fig .(a) Bead forming with a single die (b) Bead forming with two dies,in a press brake
Hemming
The edge of the sheet is folded over itself
This increases stiffness of the part
The metal strip is bent in stages by passing it through a series of rolls
Seaming
Joining two edges of sheet metal by hemming.Specifically shaped rollers used for watertight
and airtight joints
Deep drawing
Punch forces a flat sheet metal into a deep die cavity.
Round sheet metal block is placed over a circular die opening and held in a place with
blank holder & punch forces down into the die cavity

Flanging
Flanging is a process of bending the edges of sheet metals to 90o
Shrink flanging subjected to compressive hoop stress.
Stretch flanging subjected to tensile stresses

MT-I/SPS /MECH/NPR

Page 55

Fig .Various flanging operations (a) Flanges on a flat sheet. (b) Dimpling. (c) The piercing of the
sheet metal to form a flange.
In this operation,a hole does not have to be prepunched before the bunch descends .Note
however,the rough edges along the circumference of the flange. (d) The flanging of a tube; note
the thinning of the edges of the flange
UNIT-IV
Part-A (2 Marks)
1. What is sheet metal work?
2. write down any four sheet metal characteristics
3. What is meant by clearance?
4. What is stretching?
5. Define the term spring back.
6. How force exerted on the form block is calculated
7. What are the formability test methods?
8. How special forming process is defined?
9. What is super plasticity of metals?
Part-B (16 Marks)
1. Describe shearing operations in a sheet metal work with a neat sketch. (16)
MT-I/SPS /MECH/NPR

Page 56

2. Describe various types of bending operations with its neat sketches. (16)
3. Explain any one method of stretch forming operation with a neat sketch. (16)
4. Explain hydro forming process with its neat sketches. State their advantage and
applications. (16)
5. Explain the power spinning process with a neat sketch .give their applications. (16)
6. How magnetic pulse forming process is carried out on sheet metal? (16)
7. Explain peen forming process with a neat sketch. (16)
8. What is super plastic of metal? how this process is carried out on sheet metals? (16)
9. What is stretch forming ?How it is carried out in sheet metal? (16)
10. Write short notes on super plastic forming materials. (16)

MT-I/SPS /MECH/NPR

Page 57

UNIT V MANUFACTURING OF PLASTIC COMPONENTS

Common Polymers
ABS
(Acrylanitrile
Butadiene
Styrene)
Amorphous, good Impact Strength, excellent appearance, easy to process, computer housings,
small appliances, automotive interior, & medical components
Acrylic
Amorphous polymers, excellent clarity, excellent weatherability, optical & outdoor applications
Cellulosics
Among the first thermoplastics developed: smell funny, very flammable
Nylon
6
Semi-crystalline polymer, good cost to performance ratio, lower numbered nylons, absorb
moisture and change their properties as a result
Polycarbonate
Amorphous material, excellent Impact Strength, clarity, & optical properties
Polyethylene
High
Density
widely used, inexpensive, thermoplastic, easy to process, good to excellent chemical resistance,
soft & not for use above 150 F.
Polypropylene
semi-crystalline material, low temperature material, excellent chemical resistance difficult to
mold to extremely close tolerances
Polystyrene
High
Impact
(HIPS)
few cents more than crystal styrene, to pay for the rubber modifier, opaque & very widely used,
lower modulus, better elongation, & less brittle than crystal styrene
PVC
Polyvinyl
Chloride
Rigid
properties similar to ABS (except appearance) at a slightly reduced cost primarily for water
pipe and pipe fittings, occasionally for electrical enclosures *in plastic phase PVC is corrosive
to molds & machines (non corrosive as a solid)

MT-I/SPS /MECH/NPR

Page 58

Plastics
Materials that can be reshaped (remolded) by applying heat and pressure. Most plastics
are made from synthetic resins (polymers) through the industrial process of polymerization. Two
main types of plastics are thermoplastics and thermosets.
Two basic types of plastics
Thermoset- Heat hardening/ Undergoes chemical change
Thermoplastic- Heat softening/ Undergoes physical change
1.Thermosets
General properties: more durable, harder, tough, light.
Typical uses: automobile parts, construction materials
Examples:
Unsaturated Polyesters: lacquers, varnishes, boat hulls, furniture
Epoxies and Resins: glues, coating of electrical circuits, composites: fiberglass in helicopter
blades, boats,
2. Elastomers
General properties: these are thermosets, and have rubber-like properties.
Typical uses: medical masks, gloves, rubber-substitutes
Examples:
Polyurethanes: mattress, cushion, insulation, toys
Silicones:surgical gloves, oxygen masks in medical applications joint seals
3. Thermoplastics
General properties: low melting point, softer, flexible.
MT-I/SPS /MECH/NPR

Page 59

Typical uses: bottles, food wrappers, toys,

Examples:
Polyethylene: packaging, electrical insulation, milk and water bottles, packaging film
Polypropylene: carpet fibers, automotive bumpers, microwave containers, prosthetics
Polyvinyl chloride (PVC): electrical cables cover, credit cards, car instrument panels
Polystyrene: disposable spoons, forks, Styrofoam
Acrylics (PMMA: polymethyl methacrylate): paints, fake fur, plexiglass
Polyamide (nylon): textiles and fabrics, gears, bushing and washers, bearings
PET (polyethylene terephthalate): bottles for acidic foods like juices, food trays
PTFE (polytetrafluoroethylene): non-stick coating, Gore-Tex (raincoats), dental floss
Advantages
Light Weight
High Strenght-to-Weight Ratio
Complex Parts - Net Shape
Variety of Colors (or Clear)
Corrosion Resistant
Electrical Insulation
Thermal Insulation
High Damping Coefficient
Low pressures and temp required
Disadvantages
Creep
Thermally Unstable- Cant withstand Extreme Heat
U-V Light Sensitive
Relatively low stiffness
Relatively low strength
Difficult to Repair/Rework
Difficult to Sort/Recycle
Plastic Manufacturing Processes
A wide variety of plastic manufacturing processes exist
Extrusion
Lamination (Calendering)
Thermal Forming
Foaming
Molding
Expansion
Solid-Phase Forming
Casting
Spinning

MT-I/SPS /MECH/NPR

Page 60

Injection Molding
Most widely used process. Suitable for high production of thermoplastics. Charge fed
from a hopper is heated in a barrel and forced under high pressure into a mold cavity. Several
types. Variety of parts can be made.
Basic components:
mold pieces (define the geometry of the part), and sprue, gates, runners, vents, ejection pins,
cooling system
Injection Molding: 2-piece and 3-piece molds

Designing injection molds

1. molding directions --- number of inserts/cams required, if any
2. parting lines
MT-I/SPS /MECH/NPR

Page 61

3. parting planes --- by extending the parting line outwards

4. gating design --- where to locate the gate(s) ?
5. multiple cavity mold --- fix relative positions of the multiple parts
6. runners: flow of plastic into the cavity
7. sprue located:
8. functional parts of the mold
- ejection system: to eject the molded part
- systems to eject the solidified runners
- alignment rods: to keep all mold components aligned
Considerations in design of injection molded parts
The two biggest geometric concerns
(i) proper flow of plastic to all parts of the mold cavity before solidification
(ii) shrinking of the plastic resulting in sink holes
Blow Molding
used to make thermoplastic bottles and hollow sections. Starting material is a round
heated solid-bottom hollow tube perform.
Perform inserted into two die halves and air is blown inside to complete the process
General steps
Melting the resin- done in extruder
Form the molten resin into a cylinder or tube (this tube is called parison)
The parison is placed inside a mold, and inflated so that the plastic is pushed outward
against the cavity wall
The part is allowed to cool in the mold and is then ejected
The part is trimmed

The parison can be formed by

A)Extrusion process
B)Injection molding process
a)Extrusion blow molding
Parison is formed from by forcing the plastic through an extrusion die.
MT-I/SPS /MECH/NPR

Page 62

Material enters the die, flow around the mandrel so that extrudate would be
cylindrical
The die would have a hole at the center so that air could be blown into the
cylinder
In some blow molding operations, the air is introduced from the bottom through
an inlet

This process can be;

continuous extrusion blow molding
During the process, the extrusion runs continuously, thus making a
continuous parison.
using multiple mold to match the mold cycle to the extrusion speed
Intermittent extrusion blow molding
During the process, the extruder is stopped during the time that the
molding occur
use either reciprocating screw or an accumulator system
In this system, the output of the extruder is matched by having multiple molds which seal
and blow the parison and then move away from extruder to cool and eject
In practical case, the mold cycle is longer than time required to extrude a new parison
If the mold cycle is twice than time needed for creating a parison, a two mold system can
be used
The method is sometimes called rising mold system - system of which two or more molds
are used to mold parts from one extruder during continuous process
b) Injection Blow Molding
The parison is formed by the injection of molten resin into a mold cavity and around a
core pin
The parison is not a finished product, but it is subjected to subsequent step to form the
final shape
Second step, blowing of the intermediate part in a second mold
Because of distinct separation of the two steps, the parison made by injection molding is
called a perform
Process
The mold is closed
Resin is then injected to form a cylindrical part
The mold is opened and perform is ejected
The perform can be stored until the finished blow molded is needed.
The flexibility of separating the two cycles has proven useful in manufacture of soda pop
bottle.
Comparison of extrusion and injection blow molding
Extrusion blow molding
It is best suited for bottle over 200g in weight, shorter runs and quick tool
changeover
Machine costs are comparable to injection blow molding
Tooling costs are 50% to 75% less than injection machine
MT-I/SPS /MECH/NPR

Page 63

It requires sprue and head trimming

Total cycle is shorter than injection (since the parison and blowing can be done
using the same machine)
Wider choice of resin
Final part design flexibility
Injection blow molding
Best suited for long runs and smaller bottles
No trim scrap
Higher accuracy in final part
Uniform wall thickness
Better transparencies with injection blow molding, because crystallization
can be better controlled
Can lead to improve mechanical properties from improved parison design.
Common plastics for blow molding
HDPE (stiff bottle, toys, cases, drum)
LDPE (flexible bottle)
PP (higher temperature bottle)
PVC (clear bottle, oil resistant containers)
PET (soda pop bottle)
Nylon (automotive coolant bottle, power steering reservoir)
Compression Molding
The process of molding a material in a confined shape by applying pressure and usually
heat.
Almost exclusively for thermoset materials
Used to produce mainly electrical products
Thermoset granules are compressed in a heated mold to shape required.
Examples: plugs, pot handles, dishware

Process

MT-I/SPS /MECH/NPR

Page 64

Transfer Molding
A process of forming articles by fusing a plastic material in a chamber then forcing the
whole mass into a hot mold to solidify.
Used to make products such as electrical wall receptacles and circuit breakers
Similar to compression molding except thermosetting charge is forced into a heated mold
cavity using a ram or plunger.
Examples: electrical switchgear, structural parts
Process Variables
Amount of charge
Molding pressure
Closing speed
Mold temperature
Charge temperature
Cycle time
Advantages
Little waste (no gates, sprues, or runners in many molds)
Lower tooling cost than injection molding
Good surface finish
Less damage to fibers
Process may be automated or hand-operated
Material flow is short, less chance of disturbing inserts, causing product stress,
and/or eroding molds.
Disadvantages
High initial capital investment
Labor intensive
Secondary operations maybe required
Long molding cycles may be needed.
Cold Molding
Charge is pressed into shape while cold then cured in an oven. Economical but usually
poor surface finish
Extrusion

MT-I/SPS /MECH/NPR

Page 65

Extrusion is the process of squeezing metal in a closed cavity through a tool, known as a
die using either a mechanical or hydraulic press.
Similar to injection molding except long uniform sections are produced e.g. pipes, rods,
profiles.
Extrusion often minimizes the need for secondary machining,and as a result could result in
financial savings. However extruded objects are not of the same dimensional accuracy or surface
finish as machined parts.

Thermoforming
Sheet material heated to working temperature then formed into desired shape by vacuum
suction or pressure. Suitable for large items such as bath tubs

Rotational Molding
Used to form hollow seamless products such as bins. Molten charge is rotated in a mold
in two perpendicular axes simultaneously, or rotated while tilting.
Foam Molding
Foaming agent is combined with the charge to release gas, or air is blown into mixture
while forming.
Used to make foams. Amount of gas determines the density
Calendaring:
Molten plastic forced between two counter-rotating rolls to produce very thin sheets e.g.
polyethylene sheets
Spinning
Modified form of extrusion in which very thin fibers or yarns are produced
Machining
Material removal process such as drilling, turning, thread cutting. E.g. nylon fasteners. In
general thermoplastics have poor machinability.
Pressure Forming
MT-I/SPS /MECH/NPR

Page 66

It is nothing more than Vacuum Forming with pressure assist to the forming process to
enable crisper detail and sharper features. Pressure Forming utilizes pressurized air to push the
heated sheet into the cavity. Pressure formed parts can resemble the detail of injection molded
parts at a fraction of the tooling cost.
Vacuum Forming
It is accomplished by heating the plastic sheet until it is pliable enough to be vacuumed
either into a female mold or over a male mold.

MT-I/SPS /MECH/NPR

Page 67

UINT-V
PART-A (2 Marks)
1. How the plastic is defined?
2. Give some examples of additives
3. Give some examples for thermosetting plastics.
4. Give some example of thermo plastics.
5. Give some additives added to the manufacturing of rubber.
6. What are the processes of thermoplastics?
7. What are the two types of injection moulding?
8. What are the types of compression moulding?
9. define co polymerization
10. What are the foamed plastics?
Part-B (16 Marks)
1. What are the characteristics of the forming and shaping processes? (16)
2. What are the types of moulding and thermoplastics? (16)
3. Explain the working principles and application of injection moulding. (4)
a. blow moulding . (4)
b. rotational moulding. (4)
c. film blowing . (4)
4. Explain the thermoforming process. (16)
5. Explain induction and ultrasonic methods. (16)
6. Explain working and principle of applications of compression moulding. (8)
a. transfer moulding. (8)
7.What is bonding of thermo plastics?Explain. (16)
8.What are the fusion and solvent methods? (16)
9.Explain induction and ultrasonic methods. (16)

MT-I/SPS /MECH/NPR

Page 68

University Question Bank

Model 1
Part A (2 x 10 = 20)
1.Mention the specific advantages of carbon di oxide process?
2. Write the composition of good moulding sand?
3.Define welding process.
4. Define fusion welding .
5.Define forging
6. Give some basic forging operations
7.What is stretching?
8. Define the term spring back.
9.What are the types of compression moulding?
10. define co polymerization.

Part- B(5 x 16 = 80 )
11.State the different type of mould. Write a short note on Green sand mould and shell
moulding (16) OR
12. Write a neat sketch of a cupola, Explain its operate. (16)
13. Explain the method of electron beam welding and given their applications OR
14. (i)Give the advantage of press forging over drop forging. (8)
(ii)Discuss closed die forging and open die forging. (8)
15. What are the defects in forgings? Explain it. (16) OR
16. Describe various types of bending operations with its neat sketches. (16)
17. Explain any one method of stretch forming operation with a neat sketch. (16) OR
18. Explain the working principles and application of injection moulding. (4)
a. blow moulding . (4)
b. rotational moulding. (4)
c. film blowing . (4)
19. Explain the thermoforming process. (16) OR
20. Explain induction and ultrasonic methods. (16)

MT-I/SPS /MECH/NPR

Page 69