Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Bleach-Thickener: Product Contact Time Extender

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Bleach-Thickener

Product Contact Time Extender

PRODUCT CODE
53007 Bleach-Thickener
SIZES AVAILABLE
53007-01CS Case of 4 1 gallons

Weighs 40 lbs. in a box


53007-05 5 Gallon Container

Weighs 50 lbs.
BLEACH-THICKENER is an additive that is designed to
thicken and aid in extending the contact time of 12.5%
sodium hypochlorite bleach to cling on to roofs, walls, etc.
This also contains an extra penetrating surfactant to
accelerate bleach cleaning. It will not thin out over time and
does not reduce the stability of the bleach.

TECHNICAL INFORMATION
Color: Water white to straw
pH Concentrate 7-9
Odor: Mild

This is a non-hazardous substance.


CAUTION: Do not allow to freeze. Do
not store at temperatures above 120 F.
Keep out of the reach of children. Use
eye, face and hand protection when
handling. For industrial use only.
0

DIRECTIONS FOR USE:


This is a liquid just mix into the bleach or bleach solution.
We recommend adding 2 quarts (64 oz.) per 5 gallons of
12.5% bleach or bleach solution. This is an acceptable spray
viscosity with vertical cling. Apply from the bottom up, rinse
from top down. Rinses free in hot or cold water, but cold
water at low pressure may take longer. You may add more
or less depending on the conditions and the equipment
used.

NOTE: If mixed too strong it will thicken the bleach excessively


and it may become difficult to spray on to surfaces.

You might also like