UNIX TOOLBOX

This document is a collection of Unix/Linux/BSD commands and tasks which are useful for IT
work or for advanced users. This is a practical guide with concise explanations, however the
reader is supposed to know what s/he is doing.

1. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. SSH SCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6. VPN with SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. RSYNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8. SUDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
9. Encrypt Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
10. Encrypt Partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
11. SSL Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
12. CVS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
13. SVN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
14. Useful Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
15. Install Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
16. Convert Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
17. Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
18. Databases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
19. Disk Quota . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
20. Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
21. Scripting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
22. Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
23. Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Unix Toolbox revision 12

The latest version of this document can be found at http://cb.vu/unixtoolbox.xhtml. Replace
.xhtml on the link with .pdf for the PDF version and with .book.pdf for the booklet version. On a
duplex printer the booklet will create a small book ready to bind. See also the about page.
Error reports and comments are most welcome - c@cb.vu Colin Barschel.
 — System —

1 SYSTEM
Hardware (p2) | Statistics (p2) | Users (p3) | Limits (p3) | Runlevels (p4) | root password (p5) |
Compile kernel (p6)

Running kernel and system information

# uname -a # Get the kernel version (and BSD version)
# lsb_release -a # Full release info of any LSB distribution
# cat /etc/SuSE-release # Get SuSE version
# cat /etc/debian_version # Get Debian version

Use /etc/DISTR-release with DISTR= lsb (Ubuntu), redhat, gentoo, mandrake, sun (Solaris), and
so on.
# uptime # Show how long the system has been running + load
# hostname # system's host name
# hostname -i # Display the IP address of the host.
# man hier # Description of the file system hierarchy
# last reboot # Show system reboot history

1 .1 H a r d w a re I n fo rma t io ns

Kernel detected hardware

# dmesg # Detected hardware and boot messages
# lsdev # information about installed hardware
# dd if=/dev/mem bs=1k skip=768 count=256 2>/dev/null | strings -n 8 # Read BIOS

Linux

# cat /proc/cpuinfo # CPU model

# cat /proc/meminfo # Hardware memory
# grep MemTotal /proc/meminfo # Display the physical memory
# watch -n1 'cat /proc/interrupts' # Watch changeable interrupts continuously
# free -m # Used and free memory (-m for MB)
# cat /proc/devices # Configured devices
# lspci -tv # Show PCI devices
# lsusb -tv # Show USB devices
# lshal # Show a list of all devices with their properties
# dmidecode # Show DMI/SMBIOS: hw info from the BIOS

FreeBSD

# sysctl hw.model # CPU model

# sysctl hw # Gives a lot of hardware information
# sysctl vm # Memory usage
# dmesg | grep "real mem" # Hardware memory
# sysctl -a | grep mem # Kernel memory settings and info
# sysctl dev # Configured devices
# pciconf -l -cv # Show PCI devices
# usbdevs -v # Show USB devices
# atacontrol list # Show ATA devices

1 .2 L o a d, s ta t i s t ic s a nd me s s a g e s

The following commands are useful to find out what is going on on the system.
# top # display and update the top cpu processes
# mpstat 1 # display processors related statistics
# vmstat 2 # display virtual memory statistics
# iostat 2 # display I/O statistics (2 s intervals)
# systat -vmstat 1 # BSD summary of system statistics (1 s intervals)

2
 — System —
# systat -tcp 1 # BSD tcp connections (try also -ip)
# systat -netstat 1 # BSD active network connections
# systat -ifstat 1 # BSD network traffic through active interfaces
# systat -iostat 1 # BSD CPU and and disk throughput
# tail -n 500 /var/log/messages # Last 500 kernel/syslog messages
# tail /var/log/warn # System warnings messages see syslog.conf

1 .3 U s e r s

# id # Show the active user id with login and group

# last # Show last logins on the system
# who # Show who is logged on the system
# groupadd admin # Add group "admin" and user colin (Linux/Solaris)
# useradd -c "Colin Barschel" -g admin -m colin
# userdel colin # Delete user colin (Linux/Solaris)
# adduser joe # FreeBSD add user joe (interactive)
# rmuser joe # FreeBSD delete user joe (interactive)
# pw groupadd admin # Use pw on FreeBSD
# pw groupmod admin -m newmember # Add a new member to a group
# pw useradd colin -c "Colin Barschel" -g admin -m -s /bin/tcsh
# pw userdel colin; pw groupdel admin

Encrypted passwords are stored in /etc/shadow for Linux and Solaris and /etc/master.passwd on
FreeBSD. If the master.passwd is modified manually (say to delete a password), run # pwd_mkdb
-p master.passwd to rebuild the database.

To temporarily prevent logins system wide (for all users but root) use nologin. The message in
nologin will be displayed (might not work with ssh pre-shared keys).
# echo "Sorry no login now" > /etc/nologin # (Linux)
# echo "Sorry no login now" > /var/run/nologin # (FreeBSD)

1 .4 L i m i t s

Some application require higher limits on open files and sockets (like a proxy web server,
database). The default limits are usually too low.

Linux

Per shell/script
The shell limits are governed by ulimit. The status is checked with ulimit -a. For example to
change the open files limit from 1024 to 10240 do:
# ulimit -n 10240 # This is only valid within the shell

The ulimit command can be used in a script to change the limits for the script only.

Per user/process
Login users and applications can be configured in /etc/security/limits.conf. For example:
# cat /etc/security/limits.conf
* hard nproc 250 # Limit user processes
asterisk hard nofile 409600 # Limit application open files

System wide
Kernel limits are set with sysctl. Permanent limits are set in /etc/sysctl.conf.
# sysctl -a # View all system limits
# sysctl fs.file-max # View max open files limit
# sysctl fs.file-max=102400 # Change max open files limit
# echo "1024 50000" > /proc/sys/net/ipv4/ip_local_port_range # port range

3
 — System —
# cat /etc/sysctl.conf
fs.file-max=102400 # Permanent entry in sysctl.conf
# cat /proc/sys/fs/file-nr # How many file descriptors are in use

FreeBSD

Per shell/script
Use the command limits in csh or tcsh or as in Linux, use ulimit in an sh or bash shell.

Per user/process
The default limits on login are set in /etc/login.conf. An unlimited value is still limited by the
system maximal value.

System wide
Kernel limits are also set with sysctl. Permanent limits are set in /etc/sysctl.conf or /boot/
loader.conf. The syntax is the same as Linux but the keys are different.
# sysctl -a # View all system limits
# sysctl kern.maxfiles=XXXX # maximum number of file descriptors
kern.ipc.nmbclusters=32768 # Permanent entry in /etc/sysctl.conf
kern.maxfiles=65536 # Typical values for Squid
kern.maxfilesperproc=32768
kern.ipc.somaxconn=8192 # TCP queue. Better for apache/sendmail
# sysctl kern.openfiles # How many file descriptors are in use
# sysctl kern.ipc.numopensockets # How many open sockets are in use
# sysctl -w net.inet.ip.portrange.last=50000 # Default is 1024-5000

See The FreeBSD handbook Chapter 111 for details.

Solaris

The following values in /etc/system will increase the maximum file descriptors per proc:
set rlim_fd_max = 4096 # Hard limit on file descriptors for a single proc
set rlim_fd_cur = 1024 # Soft limit on file descriptors for a single proc

1 .5 R u n l e ve ls

Linux

Once booted, the kernel starts init which then starts rc which starts all scripts belonging to a
runlevel. The scripts are stored in /etc/init.d and are linked into /etc/rc.d/rcN.d with N the
runlevel number.
The default runlevel is configured in /etc/inittab. It is usually 3 or 5:
# grep default: /etc/inittab
id:3:initdefault:

The actual runlevel (the list is shown below) can be changed with init. For example to go from 3
to 5:
# init 5 # Enters runlevel 5

0 Shutdown and halt

1 Single-User mode (also S)
2 Multi-user without network
3 Multi-user with network
5 Multi-user with X
6 Reboot
Use chkconfig to configure the programs that will be started at boot in a runlevel.

1.http://www.freebsd.org/handbook/configtuning-kernel-limits.html

4
 — System —
# chkconfig --list # List all init scripts
# chkconfig --list sshd # Report the status of sshd
# chkconfig sshd --level 35 on # Configure sshd for levels 3 and 5
# chkconfig sshd off # Disable sshd for all runlevels

Debian and Debian based distributions like Ubuntu or Knoppix use the command update-rc.d to
manage the runlevels scripts. Default is to start in 2,3,4 and 5 and shutdown in 0,1 and 6.
# update-rc.d sshd defaults # Activate sshd with the default runlevels
# update-rc.d sshd start 20 2 3 4 5 . stop 20 0 1 6 . # With explicit arguments
# update-rc.d -f sshd remove # Disable sshd for all runlevels
# shutdown -h now (or # poweroff) # Shutdown and halt the system

FreeBSD

The BSD boot approach is different from the SysV, there are no runlevels. The final boot state
(single user, with or without X) is configured in /etc/ttys. All OS scripts are located in /etc/
rc.d/ and in /usr/local/etc/rc.d/ for third-party applications. The activation of the service is
configured in /etc/rc.conf and /etc/rc.conf.local. The default behavior is configured in
/etc/defaults/rc.conf. The scripts responds at least to start|stop|status.
# /etc/rc.d/sshd status
sshd is running as pid 552.
# shutdown now # Go into single-user mode
# exit # Go back to multi-user mode
# shutdown -p now # Shutdown and halt the system
# shutdown -r now # Reboot

The process init can also be used to reach one of the following states level. For example # init
6 for reboot.
0 Halt and turn the power off (signal USR2)
1 Go to single-user mode (signal TERM)
6 Reboot the machine (signal INT)
c Block further logins (signal TSTP)
q Rescan the ttys(5) file (signal HUP)

1 .6 R e s e t r o o t p a s s w o rd

Linux method 1

At the boot loader (lilo or grub), enter the following boot option:
init=/bin/sh

The kernel will mount the root partition and init will start the bourne shell instead of rc and
then a runlevel. Use the command passwd at the prompt to change the password and then
reboot. Forget the single user mode as you need the password for that.
If, after booting, the root partition is mounted read only, remount it rw:
# mount -o remount,rw /
# passwd # or delete the root password (/etc/shadow)
# sync; mount -o remount,ro / # sync before to remount read only
# reboot

FreeBSD method 1

On FreeBSD, boot in single user mode, remount / rw and use passwd. You can select the single
user mode on the boot menu (option 4) which is displayed for 10 seconds at startup. The single
user mode will give you a root shell on the / partition.
# mount -u /; mount -a # will mount / rw
# passwd
# reboot

5
 — System —
Unixes and FreeBSD and Linux method 2

Other Unixes might not let you go away with the simple init trick. The solution is to mount the
root partition from an other OS (like a rescue CD) and change the password on the disk.
• Boot a live CD or installation CD into a rescue mode which will give you a shell.
• Find the root partition with fdisk e.g. fdisk /dev/sda
• Mount it and use chroot:
# mount -o rw /dev/ad4s3a /mnt
# chroot /mnt # chroot into /mnt
# passwd
# reboot

1 .7 K e r n e l m o d u le s

Linux

# lsmod # List all modules loaded in the kernel

# modprobe isdn # To load a module (here isdn)

FreeBSD

# kldstat # List all modules loaded in the kernel

# kldload crypto # To load a module (here crypto)

1 .8 C om p i l e K e rne l

Linux

# cd /usr/src/linux
# make mrproper # Clean everything, including config files
# make oldconfig # Reuse the old .config if existent
# make menuconfig # or xconfig (Qt) or gconfig (GTK)
# make # Create a compressed kernel image
# make modules # Compile the modules
# make modules_install # Install the modules
# make install # Install the kernel
# reboot

FreeBSD

To modify and rebuild the kernel, copy the generic configuration file to a new name and edit it as
needed. It is however also possible to edit the file GENERIC directly.
# cd /usr/src/sys/i386/conf/
# cp GENERIC MYKERNEL
# cd /usr/src
# make buildkernel KERNCONF=MYKERNEL
# make installkernel KERNCONF=MYKERNEL

To rebuild the full OS:

# make buildworld # Build the full OS but not the kernel
# make buildkernel # Use KERNCONF as above if appropriate
# make installkernel
# reboot
# mergemaster -p # Compares only files known to be essential
# make installworld
# mergemaster # Update all configuration and other files
# reboot

For small changes in the source, sometimes the short version is enough:

6
 — Processes —
# make kernel world # Compile/install all (for the brave only)
# mergemaster
# reboot

2 PROCESSES
Listing (p7) | Priority (p7) | Background/Foreground (p7) | Top (p8) | Kill (p8)

2 .1 L i s t i n g a nd P I D s

Each process has a unique number, the PID. A list of all running process is retrieved with ps.
# ps -auxefw # Extensive list of all running process

However more typical usage is with a pipe or with pgrep:

# ps axww | grep cron
586 ?? Is 0:01.48 /usr/sbin/cron -s
# ps aux | grep 'ss[h]' # Find all ssh pids without the grep pid
# pgrep -l sshd # Find the PIDs of processes by (part of) name
# echo $$ # The PID of your shell
# fuser -va 22/tcp # List processes using port 22 (Linux)
# fuser -va /home # List processes accessing the /home partiton
# strace df # Trace system calls and signals
# truss df # same as above on FreeBSD/Solaris/Unixware
# history | tail -50 # Display the last 50 used commands

2 .2 P r i or i t y

Change the priority of a running process with renice. Negative numbers have a higher priority,
the lowest is -20 and "nice" have a positive value.
# renice -5 586 # Stronger priority
586: old priority 0, new priority -5

Start the process with a defined priority with nice. Positive is "nice" or weak, negative is strong
scheduling priority. Make sure you know if /usr/bin/nice or the shell built-in is used (check
with # which nice).
# nice -n -5 top # Stronger priority (/usr/bin/nice)
# nice -n 5 top # Weaker priority (/usr/bin/nice)
# nice +5 top # tcsh builtin nice (same as above!)

While nice changes the CPU scheduler, an other useful command ionice will schedule the disk
IO. This is very useful for intensive IO application which can bring a machine to its knees while
still in a lower priority. The command is only available on Linux (AFAIK). You can select a class
(idle - best effort - real time), the man page is short and well explained.
# ionice c3 -p123 # set idle class for pid 123
# ionice -c2 -n0 firefox # Run firefox with best effort and high priority
# ionice -c3 -p$$ # Set the actual shell to idle priority

For example last command is very useful to compile (or debug) a large project. Every command
launched from this shell will have a lover priority and will not disturb the system. $$ is your shell
pid (try echo $$).

2 .3 Ba ck gr o un d / F o re g ro u n d

When started from a shell, processes can be brought in the background and back to the
foreground with [Ctrl]-[Z] (^Z), bg and fg. For example start two processes, bring them in the
background, list the processes with jobs and bring one in the foreground.

7
 — File System —
# ping cb.vu > ping.log
^Z # ping is suspended (stopped) with [Ctrl]-[Z]
# bg # put in background and continues running
# jobs -l # List processes in background
[1] - 36232 Running ping cb.vu > ping.log
[2] + 36233 Suspended (tty output) top
# fg %2 # Bring process 2 back in foreground

Use nohup to start a process which has to keep running when the shell is closed (immune to
hangups).
# nohup ping -i 60 > ping.log &

2 .4 T o p

The program top displays running information of processes. The program htop from
htop.sourceforge.net is a very nice alternative and a more powerful version of top. Runs on Linux
and FreeBSD (ports/sysutils/htop/).
# top

While top is running press the key h for a help overview. Useful keys are:
• u [user name] To display only the processes belonging to the user. Use + or blank to
see all users
• k [pid] Kill the process with pid.
• 1 To display all processors statistics (Linux only)
• R Toggle normal/reverse sort.

2 .5 Si gn a l s / K ill

Terminate or send a signal with kill or killall.

# ping -i 60 cb.vu > ping.log &
[1] 4712
# kill -s TERM 4712 # same as kill -15 4712
# killall -1 httpd # Kill HUP processes by exact name
# pkill -9 http # Kill TERM processes by (part of) name
# pkill -TERM -u www # Kill TERM processes owned by www
# fuser -k -TERM -m /home # Kill every process accessing /home (to umount)

Important signals are:

1 HUP (hang up)
2 INT (interrupt)
3 QUIT (quit)
9 KILL (non-catchable, non-ignorable kill)
15 TERM (software termination signal)

3 FILE SYSTEM
Disk info (p9) | Boot (p9) | Disk usage (p9) | Opened files (p9) | Mount/remount (p10) | Mount
SMB (p11) | Mount image (p12) | Burn ISO (p12) | Create image (p13) | Memory disk (p14) |
Disk performance (p14)

3 .1 P e r m i s s i o ns

Change permission and ownership with chmod and chown. The default umask can be changed for
all users in /etc/profile for Linux or /etc/login.conf for FreeBSD. The default umask is usually 022.
The umask is subtracted from 777, thus umask 022 results in a permission 0f 755.

8
 — File System —
1 --x execute # Mode 764 = exec/read/write | read/write | read
2 -w- write # For: |-- Owner --| |- Group-| |Oth|
4 r-- read
ugo=a u=user, g=group, o=others, a=everyone

# chmod [OPTION] MODE[,MODE] FILE # MODE is of the form [ugoa]*([-+=]([rwxXst]))

# chmod 640 /var/log/maillog # Restrict the log -rw-r-----
# chmod u=rw,g=r,o= /var/log/maillog # Same as above
# chmod -R o-r /home/* # Recursive remove other readable for all users
# chmod u+s /path/to/prog # Set SUID bit on executable (know what you do!)
# find / -perm -u+s -print # Find all programs with the SUID bit
# chown user:group /path/to/file # Change the user and group ownership of a file
# chgrp group /path/to/file # Change the group ownership of a file
# chmod 640 `find ./ -type f -print` # Change permissions to 640 for all files
# chmod 751 `find ./ -type d -print` # Change permissions to 751 for all directories

3 .2 D i s k i n f o rma t io n

# diskinfo -v /dev/ad2 # information about disk (sector/size) FreeBSD

# hdparm -I /dev/sda # information about the IDE/ATA disk (Linux)
# fdisk /dev/ad2 # Display and manipulate the partition table
# smartctl -a /dev/ad2 # Display the disk SMART info

3 .3 Bo o t

FreeBSD

To boot an old kernel if the new kernel doesn't boot, stop the boot at during the count down.
# unload
# load kernel.old
# boot

3 .4 Sy s t e m mo un t p o int s / D i s k u s a g e

# mount | column -t # Show mounted file-systems on the system

# df # display free disk space and mounted devices
# cat /proc/partitions # Show all registered partitions (Linux)

Disk usage

# du -sh * # Directory sizes as listing

# du -csh # Total directory size of the current directory
# du -ks * | sort -n -r # Sort everything by size in kilobytes
# ls -lSr # Show files, biggest last

3 .5 W h o h a s w hi c h file s o p en e d

This is useful to find out which file is blocking a partition which has to be unmounted and gives a
typical error of:
# umount /home/
umount: unmount of /home # umount impossible because a file is locking home
failed: Device busy

FreeBSD and most Unixes

# fstat -f /home # for a mount point

# fstat -p PID # for an application with PID
# fstat -u user # for a user name

9
 — File System —
Find opened log file (or other opened files), say for Xorg:
# ps ax | grep Xorg | awk '{print $1}'
1252
# fstat -p 1252
USER CMD PID FD MOUNT INUM MODE SZ|DV R/W
root Xorg 1252 root / 2 drwxr-xr-x 512 r
root Xorg 1252 text /usr 216016 -rws--x--x 1679848 r
root Xorg 1252 0 /var 212042 -rw-r--r-- 56987 w

The file with inum 212042 is the only file in /var:

# find -x /var -inum 212042
/var/log/Xorg.0.log

Linux

Find opened files on a mount point with fuser or lsof:

# fuser -m /home # List processes accessing /home
# lsof /home
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
tcsh 29029 eedcoba cwd DIR 0,18 12288 1048587 /home/eedcoba (guam:/home)
lsof 29140 eedcoba cwd DIR 0,18 12288 1048587 /home/eedcoba (guam:/home)

About an application:
ps ax | grep Xorg | awk '{print $1}'
3324
# lsof -p 3324
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
Xorg 3324 root 0w REG 8,6 56296 12492 /var/log/Xorg.0.log

About a single file:

# lsof /var/log/Xorg.0.log
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
Xorg 3324 root 0w REG 8,6 56296 12492 /var/log/Xorg.0.log

3 .6 Mou n t / re m o un t a file s y s t em

For example the cdrom. If listed in /etc/fstab:

# mount /cdrom

Or find the device in /dev/ or with dmesg

FreeBSD

# mount -v -t cd9660 /dev/cd0c /mnt # cdrom

# mount_cd9660 /dev/wcd0c /cdrom # other method
# mount -v -t msdos /dev/fd0c /mnt # floppy

Entry in /etc/fstab:
# Device Mountpoint FStype Options Dump Pass#
/dev/acd0 /cdrom cd9660 ro,noauto 0 0

To let users do it:

# sysctl vfs.usermount=1 # Or insert the line "vfs.usermount=1" in /etc/sysctl.conf

Linux

# mount -t auto /dev/cdrom /mnt/cdrom # typical cdrom mount command

# mount /dev/hdc -t iso9660 -r /cdrom # typical IDE
# mount /dev/scd0 -t iso9660 -r /cdrom # typical SCSI cdrom
# mount /dev/sdc0 -t ntfs-3g /windows # typical SCSI

10
 — File System —
Entry in /etc/fstab:
/dev/cdrom /media/cdrom subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec 0 0

Mount a FreeBSD partition with Linux

Find the partition number containing with fdisk, this is usually the root partition, but it could be
an other BSD slice too. If the FreeBSD has many slices, they are the one not listed in the fdisk
table, but visible in /dev/sda* or /dev/hda*.
# fdisk /dev/sda # Find the FreeBSD partition
/dev/sda3 * 5357 7905 20474842+ a5 FreeBSD
# mount -t ufs -o ufstype=ufs2,ro /dev/sda3 /mnt
/dev/sda10 = /tmp; /dev/sda11 /usr # The other slices

Remount

Remount a device without unmounting it. Necessary for fsck for example
# mount -o remount,ro / # Linux
# mount -o ro / # FreeBSD

Copy the raw data from a cdrom into an iso image:

# dd if=/dev/cd0c of=file.iso

3 .7 A d d s wa p o n- t h e - f ly

Suppose you need more swap (right now), say a 2GB file /swap2gb (Linux only).
# dd if=/dev/zero of=/swap2gb bs=1024k count=2000
# mkswap /swap2gb # create the swap area
# swapon /swap2gb # activate the swap. It now in use
# swapoff /swap2gb # when done deactivate the swap
# rm /swap2gb

3 .8 Mou n t an S M B s ha re

Suppose we want to access the SMB share myshare on the computer smbserver, the address as
typed on a Windows PC is \\smbserver\myshare\. We mount on /mnt/smbshare. Warning> cifs
wants an IP or DNS name, not a Windows name.

Linux

# smbclient -U user -I 192.168.16.229 -L //smbshare/ # List the shares

# mount -t smbfs -o username=winuser //smbserver/myshare /mnt/smbshare
# mount -t cifs -o username=winuser,password=winpwd //192.168.16.229/myshare /mnt/share

Additionally with the package mount.cifs it is possible to store the credentials in a file, for
example /home/user/.smb:
username=winuser
password=winpwd

And mount as follow:

# mount -t cifs -o credentials=/home/user/.smb //192.168.16.229/myshare /mnt/smbshare

FreeBSD

Use -I to give the IP (or DNS name); smbserver is the Windows name.
# smbutil view -I 192.168.16.229 //winuser@smbserver # List the shares
# mount_smbfs -I 192.168.16.229 //winuser@smbserver/myshare /mnt/smbshare

11
 — File System —
3 .9 Mou n t an ima g e

Linux loop-back

# mount -t iso9660 -o loop file.iso /mnt # Mount a CD image

# mount -t ext3 -o loop file.img /mnt # Mount an image with ext3 fs

FreeBSD

With memory device (do # kldload md.ko if necessary):

# mdconfig -a -t vnode -f file.iso -u 0
# mount -t cd9660 /dev/md0 /mnt
# umount /mnt; mdconfig -d -u 0 # Cleanup the md device

Or with virtual node:

# vnconfig /dev/vn0c file.iso; mount -t cd9660 /dev/vn0c /mnt
# umount /mnt; vnconfig -u /dev/vn0c # Cleanup the vn device

Solaris and FreeBSD

with loop-back file interface or lofi:

# lofiadm -a file.iso
# mount -F hsfs -o ro /dev/lofi/1 /mnt
# umount /mnt; lofiadm -d /dev/lofi/1 # Cleanup the lofi device

3 .10 C r e a t e a nd b urn a n I S O i m a g e

This will copy the cd or DVD sector for sector. Without conv=notrunc, the image will be smaller if
there is less content on the cd. See below and the dd examples (page 41).
# dd if=/dev/hdc of=/tmp/mycd.iso bs=2048 conv=notrunc

Use mkisofs to create a CD/DVD image from files in a directory. To overcome the file names
restrictions: -r enables the Rock Ridge extensions common to UNIX systems, -J enables Joliet
extensions used by Microsoft systems. -L allows ISO9660 filenames to begin with a period.
# mkisofs -J -L -r -V TITLE -o imagefile.iso /path/to/dir

On FreeBSD, mkisofs is found in the ports in sysutils/cdrtools.

Burn a CD/DVD ISO image

FreeBSD
FreeBSD does not enable DMA on ATAPI drives by default. DMA is enabled with the sysctl
command and the arguments below, or with /boot/loader.conf with the following entries:
hw.ata.ata_dma="1"
hw.ata.atapi_dma="1"

Use burncd with an ATAPI device (burncd is part of the base system) and cdrecord (in sysutils/
cdrtools) with a SCSI drive.
# burncd -f /dev/acd0 data imagefile.iso fixate # For ATAPI drive
# cdrecord -scanbus # To find the burner device (like 1,0,0)
# cdrecord dev=1,0,0 imagefile.iso

Linux
Also use cdrecord with Linux as described above. Additionally it is possible to use the native
ATAPI interface which is found with:
# cdrecord dev=ATAPI -scanbus

And burn the CD/DVD as above.

12
 — File System —
dvd+rw-tools
The dvd+rw-tools package (FreeBSD: ports/sysutils/dvd+rw-tools) can do it all and includes
growisofs to burn CDs or DVDs. The examples refere to the dvd device as /dev/dvd which could
be a symlink to /dev/scd0 (typical scsi on Linux) or /dev/cd0 (typical FreeBSD) or /dev/rcd0c
(typical NetBSD/OpenBSD character SCSI) or /dev/rdsk/c0t1d0s2 (Solaris example of a
character SCSI/ATAPI CD-ROM device). There is a nice documentation with examples on the
FreeBSD handbook chapter 18.72.
# -dvd-compat closes the disk
# growisofs -dvd-compat -Z /dev/dvd=imagefile.iso # Burn existing iso image
# growisofs -dvd-compat -Z /dev/dvd -J -R /p/to/data # Burn directly

Convert a Nero .nrg file to .iso

Nero simply adds a 300Kb header to a normal iso image. This can be trimmed with dd.
# dd bs=1k if=imagefile.nrg of=imagefile.iso skip=300

Convert a bin/cue image to .iso

The little bchunk program3 can do this. It is in the FreeBSD ports in sysutils/bchunk.
# bchunk imagefile.bin imagefile.cue imagefile.iso

3 .11 C r e a t e a file b a s e d im a g e

For example a partition of 1GB using the file /usr/vdisk.img. Here we use the vnode 0, but it
could also be 1.

FreeBSD

# dd if=/dev/random of=/usr/vdisk.img bs=1K count=1M

# mdconfig -a -t vnode -f /usr/vdisk.img -u 0 # Creates device /dev/md1
# bsdlabel -w /dev/md0
# newfs /dev/md0c
# mount /dev/md0c /mnt
# umount /mnt; mdconfig -d -u 0; rm /usr/vdisk.img # Cleanup the md device

The file based image can be automatically mounted during boot with an entry in /etc/rc.conf and
/etc/fstab. Test your setup with # /etc/rc.d/mdconfig start (first delete the md0 device with
# mdconfig -d -u 0).
Note however that this automatic setup will only work if the file image is NOT on the root
partition. The reason is that the /etc/rc.d/mdconfig script is executed very early buring boot and
the root partition is still read-only. Images located outside the root partition will be mounted later
with the script /etc/rc.d/mdconfig2.
/boot/loader.conf:
md_load="YES"

/etc/rc.conf:
# mdconfig_md0="-t vnode -f /usr/vdisk.img" # /usr is not on the root partition

/etc/fstab: (The 0 0 at the end is important, it tell fsck to ignore this device, as is does not exist
yet)
/dev/md0 /usr/vdisk ufs rw 0 0

It is also possible to increase the size of the image afterward, say for example 300 MB larger.
# umount /mnt; mdconfig -d -u 0
# dd if=/dev/zero bs=1m count=300 >> /usr/vdisk.img

2.http://www.freebsd.org/handbook/creating-dvds.html
3.http://freshmeat.net/projects/bchunk/

13
 — Network —
# mdconfig -a -t vnode -f /usr/vdisk.img -u 0
# growfs /dev/md0
# mount /dev/md0c /mnt # File partition is now 300 MB larger

Linux

# dd if=/dev/zero of=/usr/vdisk.img bs=1024k count=1024

# mkfs.ext3 /usr/vdisk.img
# mount -o loop /usr/vdisk.img /mnt
# umount /mnt; rm /usr/vdisk.img # Cleanup

Linux with losetup

/dev/zero is much faster than urandom, but less secure for encryption.
# dd if=/dev/urandom of=/usr/vdisk.img bs=1024k count=1024
# losetup /dev/loop0 /usr/vdisk.img # Creates and associates /dev/loop0
# mkfs.ext3 /dev/loop0
# mount /dev/loop0 /mnt
# losetup -a # Check used loops
# umount /mnt
# losetup -d /dev/loop0 # Detach
# rm /usr/vdisk.img

3 .12 C r e a t e a me m o ry file s y s t e m

A memory based file system is very fast for heavy IO application. How to create a 64 MB
partition mounted on /memdisk:

FreeBSD

# mount_mfs -o rw -s 64M md /memdisk

# umount /memdisk; mdconfig -d -u 0 # Cleanup the md device
md /memdisk mfs rw,-s64M 0 0 # /etc/fstab entry

Linux

# mount -t tmpfs -osize=64m tmpfs /memdisk

3 .13 D i s k p e rf o rma nc e

Read and write a 1 GB file on partition ad4s3c (/home)

# time dd if=/dev/ad4s3c of=/dev/null bs=1024k count=1000
# time dd if=/dev/zero bs=1024k count=1000 of=/home/1Gb.file
# hdparm -tT /dev/hda # Linux only

4 NETWORK
Routing (p15) | Additional IP (p16) | Change MAC (p16) | Ports (p16) | Firewall (p16) | IP
Forward (p17) | NAT (p17) | DNS (p18) | DHCP (p19) | Traffic (p19) | QoS (p20) | NIS (p21)

4 .1 D e bu gg i ng ( S e e a ls o Tr a f f i c a n a l y s i s ) ( p a g e 1 9 )

Linux

# ethtool eth0 # Show the ethernet status (replaces mii-diag)

# ethtool -s eth0 speed 100 duplex full # Force 100Mbit Full duplex
# ethtool -s eth0 autoneg off # Disable auto negotiation

14
 — Network —
# ethtool -p eth1 # Blink the ethernet led - very useful when supported
# ip link show # Display all interfaces on Linux (similar to ifconfig)
# ip link set eth0 up # Bring device up (or down). Same as "ifconfig eth0 up"
# ip addr show # Display all IP addresses on Linux (similar to ifconfig)
# ip neigh show # Similar to arp -a

Other OSes

# ifconfig fxp0 # Check the "media" field on FreeBSD

# arp -a # Check the router (or host) ARP entry (all OS)
# ping cb.vu # The first thing to try...
# traceroute cb.vu # Print the route path to destination
# ifconfig fxp0 media 100baseTX mediaopt full-duplex # 100Mbit full duplex (FreeBSD)
# netstat -s # System-wide statistics for each network protocol

Additional commands which are not always installed per default but easy to find:
# arping 192.168.16.254 # Ping on ethernet layer
# tcptraceroute -f 5 cb.vu # uses tcp instead of icmp to trace throught firewalls

4 .2 R ou t i n g

Print routing table

# route -n # Linux or use "ip route"

# netstat -rn # Linux, BSD and UNIX
# route print # Windows

Add and delete a route

FreeBSD
# route add 212.117.0.0/16 192.168.1.1
# route delete 212.117.0.0/16
# route add default 192.168.1.1

Add the route permanently in /etc/rc.conf

static_routes="myroute"
route_myroute="-net 212.117.0.0/16 192.168.1.1"

Linux
# route add -net 192.168.20.0 netmask 255.255.255.0 gw 192.168.16.254
# ip route add 192.168.20.0/24 via 192.168.16.254 # same as above with ip route
# route add -net 192.168.20.0 netmask 255.255.255.0 dev eth0
# route add default gw 192.168.51.254
# ip route add default via 192.168.51.254 dev eth0 # same as above with ip route
# route delete -net 192.168.20.0 netmask 255.255.255.0

Solaris
# route add -net 192.168.20.0 -netmask 255.255.255.0 192.168.16.254
# route add default 192.168.51.254 1 # 1 = hops to the next gateway
# route change default 192.168.50.254 1

Permanent entries are set in entry in /etc/defaultrouter.

Windows
# Route add 192.168.50.0 mask 255.255.255.0 192.168.51.253
# Route add 0.0.0.0 mask 0.0.0.0 192.168.51.254

Use add -p to make the route persistent.

15
 — Network —
4 .3 C on f i g ure a d d it io na l I P a d d r es s e s

Linux

# ifconfig eth0 192.168.50.254 netmask 255.255.255.0 # First IP

# ifconfig eth0:0 192.168.51.254 netmask 255.255.255.0 # Second IP
# ip addr add 192.168.50.254/24 dev eth0 # Equivalent ip commands
# ip addr add 192.168.51.254/24 dev eth0 label eth0:1

FreeBSD

# ifconfig fxp0 inet 192.168.50.254/24 # First IP

# ifconfig fxp0 alias 192.168.51.254 netmask 255.255.255.0 # Second IP

Permanent entries in /etc/rc.conf

ifconfig_fxp0="inet 192.168.50.254 netmask 255.255.255.0"
ifconfig_fxp0_alias0="192.168.51.254 netmask 255.255.255.0"

Solaris

Check the settings with ifconfig -a

# ifconfig hme0 plumb # Enable the network card
# ifconfig hme0 192.168.50.254 netmask 255.255.255.0 up # First IP
# ifconfig hme0:1 192.168.51.254 netmask 255.255.255.0 up # Second IP

4 .4 C h a n g e M A C a d d re s s

Normally you have to bring the interface down before the change. Don't tell me why you want to
change the MAC address...
# ifconfig eth0 down
# ifconfig eth0 hw ether 00:01:02:03:04:05 # Linux
# ifconfig fxp0 link 00:01:02:03:04:05 # FreeBSD
# ifconfig hme0 ether 00:01:02:03:04:05 # Solaris
# sudo ifconfig en0 ether 00:01:02:03:04:05 # Mac OS X Tiger
# sudo ifconfig en0 lladdr 00:01:02:03:04:05 # Mac OS X Leopard

Many tools exist for Windows. For example etherchange4. Or look for "Mac Makeup", "smac".

4 .5 P or t s i n us e

Listening open ports:

# netstat -an | grep LISTEN
# lsof -i # Linux list all Internet connections
# socklist # Linux display list of open sockets
# sockstat -4 # FreeBSD application listing
# netstat -anp --udp --tcp | grep LISTEN # Linux
# netstat -tup # List active connections to/from system (Linux)
# netstat -tupl # List listening ports from system (Linux)
# netstat -ano # Windows

4 .6 F i r e w a l l

Check if a firewall is running (typical configuration only):

4.http://ntsecurity.nu/toolbox/etherchange

16
 — Network —
Linux

# iptables -L -n -v # For status

Open the iptables firewall
# iptables -P INPUT ACCEPT # Open everything
# iptables -P FORWARD ACCEPT
# iptables -P OUTPUT ACCEPT
# iptables -Z # Zero the packet and byte counters in all chains
# iptables -F # Flush all chains
# iptables -X # Delete all chains

FreeBSD

# ipfw show # For status

# ipfw list 65535 # if answer is "65535 deny ip from any to any" the fw is disabled
# sysctl net.inet.ip.fw.enable=0 # Disable
# sysctl net.inet.ip.fw.enable=1 # Enable

4 .7 I P F or w a rd fo r ro ut i ng

Linux

Check and then enable IP forward with:

# cat /proc/sys/net/ipv4/ip_forward # Check IP forward 0=off, 1=on
# echo 1 > /proc/sys/net/ipv4/ip_forward

or edit /etc/sysctl.conf with:

net.ipv4.ip_forward = 1

FreeBSD

Check and enable with:

# sysctl net.inet.ip.forwarding # Check IP forward 0=off, 1=on
# sysctl net.inet.ip.forwarding=1
# sysctl net.inet.ip.fastforwarding=1 # For dedicated router or firewall
Permanent with entry in /etc/rc.conf:
gateway_enable="YES" # Set to YES if this host will be a gateway.

Solaris

# ndd -set /dev/ip ip_forwarding 1 # Set IP forward 0=off, 1=on

4 .8 N A T N e tw o rk A d d re s s T r a n s l a t i o n

Linux

# iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # to activate NAT

# iptables -t nat -A PREROUTING -p tcp -d 78.31.70.238 --dport 20022 -j DNAT \
--to 192.168.16.44:22 # Port forward 20022 to internal IP port ssh
# iptables -t nat -A PREROUTING -p tcp -d 78.31.70.238 --dport 993:995 -j DNAT \
--to 192.168.16.254:993:995 # Port forward of range 993-995
# ip route flush cache
# iptables -L -t nat # Check NAT status

Delete the port forward with -D instead of -A.

FreeBSD

# natd -s -m -u -dynamic -f /etc/natd.conf -n fxp0

Or edit /etc/rc.conf with:

17
 — Network —
firewall_enable="YES" # Set to YES to enable firewall functionality
firewall_type="open" # Firewall type (see /etc/rc.firewall)
natd_enable="YES" # Enable natd (if firewall_enable == YES).
natd_interface="tun0" # Public interface or IP address to use.
natd_flags="-s -m -u -dynamic -f /etc/natd.conf"

Port forward with:

# cat /etc/natd.conf
same_ports yes
use_sockets yes
unregistered_only
# redirect_port tcp insideIP:2300-2399 3300-3399 # port range
redirect_port udp 192.168.51.103:7777 7777

4 .9 D N S

On Unix the DNS entries are valid for all interfaces and are stored in /etc/resolv.conf. The domain
to which the host belongs is also stored in this file. A minimal configuration is:
nameserver 78.31.70.238
search sleepyowl.net intern.lab
domain sleepyowl.net

Check the system domain name with:

# hostname -d # Same as dnsdomainname

Windows

On Windows the DNS are configured per interface. To display the configured DNS and to flush the
DNS cache use:
# ipconfig /? # Display help
# ipconfig /all # See all information including DNS
# ipconfig /flushdns # Flush the DNS cache

Forward queries

Dig is you friend to test the DNS settings. For example the public DNS server 213.133.105.2
ns.second-ns.de can be used for testing. See from which server the client receives the answer
(simplified answer).
# dig sleepyowl.net
sleepyowl.net. 600 IN A 78.31.70.238
;; SERVER: 192.168.51.254#53(192.168.51.254)

The router 192.168.51.254 answered and the response is the A entry. Any entry can be queried
and the DNS server can be selected with @:
# dig MX google.com
# dig @127.0.0.1 NS sun.com # To test the local server
# dig @204.97.212.10 NS MX heise.de # Query an external server
# dig AXFR @ns1.xname.org cb.vu # Get the full zone (zone transfer)

The program host is also powerful.

# host -t MX cb.vu # Get the mail MX entry
# host -t NS -T sun.com # Get the NS record over a TCP connection
# host -a sleepyowl.net # Get everything

Reverse queries

Find the name belonging to an IP address (in-addr.arpa.). This can be done with dig, host and
nslookup:

18
 — Network —
# dig -x 78.31.70.238
# host 78.31.70.238
# nslookup 78.31.70.238

/etc/hosts

Single hosts can be configured in the file /etc/hosts instead of running named locally to resolve
the hostname queries. The format is simple, for example:
78.31.70.238 sleepyowl.net sleepyowl

The priority between hosts and a dns query, that is the name resolution order, can be configured
in /etc/nsswitch.conf AND /etc/host.conf. The file also exists on Windows, it is usually in:
C:\WINDOWS\SYSTEM32\DRIVERS\ETC

4 .10 D H C P

Linux

Some distributions (SuSE) use dhcpcd as client. The default interface is eth0.
# dhcpcd -n eth0 # Trigger a renew (does not always work)
# dhcpcd -k eth0 # release and shutdown

The lease with the full information is stored in:

/var/lib/dhcpcd/dhcpcd-eth0.info

FreeBSD

FreeBSD (and Debian) uses dhclient. To configure an interface (for example bge0) run:
# dhclient bge0

The lease with the full information is stored in:

/var/db/dhclient.leases.bge0

Use
/etc/dhclient.conf

to prepend options or force different options:

# cat /etc/dhclient.conf
interface "rl0" {
prepend domain-name-servers 127.0.0.1;
default domain-name "sleepyowl.net";
supersede domain-name "sleepyowl.net";
}

Windows

The dhcp lease can be renewed with ipconfig:

# ipconfig /renew # renew all adapters
# ipconfig /renew LAN # renew the adapter named "LAN"
# ipconfig /release WLAN # release the adapter named "WLAN"

Yes it is a good idea to rename you adapter with simple names!

4 .11 T r a f f i c a na l ys i s

Bmon5 is a small console bandwidth monitor and can display the flow on different interfaces.

5.http://people.suug.ch/~tgr/bmon/

19
 — Network —
Sniff with tcpdump

# tcpdump -nl -i bge0 not port ssh and src \(192.168.16.121 or 192.168.16.54\)
# tcpdump -l > dump && tail -f dump # Buffered output
# tcpdump -i rl0 -w traffic.rl0 # Write traffic in binary file
# tcpdump -r traffic.rl0 # Read from file (also for ethereal
# tcpdump port 80 # The two classic commands
# tcpdump host google.com
# tcpdump -i eth0 -X port \(110 or 143\) # Check if pop or imap is secure
# tcpdump -n -i eth0 icmp # Only catch pings
# tcpdump -i eth0 -s 0 -A port 80 | grep GET # -s 0 for full packet -A for ASCII

Additional important options:

-A Print each packets in clear text (without header)
-X Print packets in hex and ASCII
-l Make stdout line buffered
-D Print all interfaces available
On Windows use windump from www.winpcap.org. Use windump -D to list the interfaces.

Scan with nmap

Nmap6 is a port scanner with OS detection, it is usually installed on most distributions and is also
available for Windows. If you don't scan your servers, hackers do it for you...
# nmap cb.vu # scans all reserved TCP ports on the host
# nmap -sP 192.168.16.0/24 # Find out which IP are used and by which host on 0/24
# nmap -sS -sV -O cb.vu # Do a stealth SYN scan with version and OS detection
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 3.8.1p1 FreeBSD-20060930 (protocol 2.0)
25/tcp open smtp Sendmail smtpd 8.13.6/8.13.6
80/tcp open http Apache httpd 2.0.59 ((FreeBSD) DAV/2 PHP/4.
[...]
Running: FreeBSD 5.X
Uptime 33.120 days (since Fri Aug 31 11:41:04 2007)

Other non standard but useful tools are hping (www.hping.org) an IP packet assembler/analyzer
and fping (fping.sourceforge.net). fping can check multiple hosts in a round-robin fashion.

4 .12 T r a f f i c c o n t ro l ( Q o S )

Traffic control manages the queuing, policing, scheduling, and other traffic parameters for a
network. The following examples are simple practical uses of the Linux and FreeBSD capabilities
to better use the available bandwidth.

Limit upload

DSL or cable modems have a long queue to improve the upload throughput. However filling the
queue with a fast device (e.g. ethernet) will dramatically decrease the interactivity. It is therefore
useful to limit the device upload rate to match the physical capacity of the modem, this should
greatly improve the interactivity. Set to about 90% of the modem maximal (cable) speed.

Linux
For a 512 Kbit upload modem.
# tc qdisc add dev eth0 root tbf rate 480kbit latency 50ms burst 1540
# tc -s qdisc ls dev eth0 # Status
# tc qdisc del dev eth0 root # Delete the queue
# tc qdisc change dev eth0 root tbf rate 220kbit latency 50ms burst 1540

6.http://insecure.org/nmap/

20
 — Network —
FreeBSD
FreeBSD uses the dummynet traffic shaper which is configured with ipfw. Pipes are used to set
limits the bandwidth in units of [K|M]{bit/s|Byte/s}, 0 means unlimited bandwidth. Using the
same pipe number will reconfigure it. For example limit the upload bandwidth to 500 Kbit.
# kldload dummynet # load the module if necessary
# ipfw pipe 1 config bw 500Kbit/s # create a pipe with limited bandwidth
# ipfw add pipe 1 ip from me to any # divert the full upload into the pipe

Quality of service

Linux
Priority queuing with tc to optimize VoIP. See the full example on voip-info.org or
www.howtoforge.com. Suppose VoIP uses udp on ports 10000:11024 and device eth0 (could also
be ppp0 or so). The following commands define the QoS to three queues and force the VoIP
traffic to queue 1 with QoS 0x1e (all bits set). The default traffic flows into queue 3 and QoS
Minimize-Delay flows into queue 2.
# tc qdisc add dev eth0 root handle 1: prio priomap 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 0
# tc qdisc add dev eth0 parent 1:1 handle 10: sfq
# tc qdisc add dev eth0 parent 1:2 handle 20: sfq
# tc qdisc add dev eth0 parent 1:3 handle 30: sfq
# tc filter add dev eth0 protocol ip parent 1: prio 1 u32 \
match ip dport 10000 0x3C00 flowid 1:1 # use server port range
match ip dst 123.23.0.1 flowid 1:1 # or/and use server IP

Status and remove with

# tc -s qdisc ls dev eth0 # queue status
# tc qdisc del dev eth0 root # delete all QoS

Calculate port range and mask

The tc filter defines the port range with port and mask which you have to calculate. Find the 2^N
ending of the port range, deduce the range and convert to HEX. This is your mask. Example for
10000 -> 11024, the range is 1024.
# 2^13 (8192) < 10000 < 2^14 (16384) # ending is 2^14 = 16384
# echo "obase=16;(2^14)-1024" | bc # mask is 0x3C00

FreeBSD
The max link bandwidth is 500Kbit/s and we define 3 queues with priority 100:10:1 for
VoIP:ssh:all the rest.
# ipfw pipe 1 config bw 500Kbit/s
# ipfw queue 1 config pipe 1 weight 100
# ipfw queue 2 config pipe 1 weight 10
# ipfw queue 3 config pipe 1 weight 1
# ipfw add 10 queue 1 proto udp dst-port 10000-11024
# ipfw add 11 queue 1 proto udp dst-ip 123.23.0.1 # or/and use server IP
# ipfw add 20 queue 2 dsp-port ssh
# ipfw add 30 queue 3 from me to any # all the rest

Status and remove with

# ipfw list # rules status
# ipfw pipe list # pipe status
# ipfw flush # deletes all rules but default

4 .13 N I S D e b ug g i ng

Some commands which should work on a well configured NIS client:

# ypwhich # get the connected NIS server name
# domainname # The NIS domain name as configured

21
 — SSH SCP —
# ypcat group # should display the group from the NIS server
# cd /var/yp && make # Rebuild the yp database

Is ypbind running?
# ps auxww | grep ypbind
/usr/sbin/ypbind -s -m -S servername1,servername2 # FreeBSD
/usr/sbin/ypbind # Linux
# yppoll passwd.byname
Map passwd.byname has order number 1190635041. Mon Sep 24 13:57:21 2007
The master server is servername.domain.net.

Linux

# cat /etc/yp.conf
ypserver servername
domain domain.net broadcast

5 SSH SCP
Public key (p22) | Fingerprint (p23) | SCP (p23) | Tunneling (p23)

5 .1 P u bl i c ke y a ut h e n t ic a t i o n

Connect to a host without password using public key authentication. The idea is to append your
public key to the authorized_keys2 file on the remote host. For this example let's connect
host-client to host-server, the key is generated on the client.
• Use ssh-keygen to generate a key pair. ~/.ssh/id_dsa is the private key, ~/.ssh/
id_dsa.pub is the public key.
• Copy only the public key to the server and append it to the file ~/.ssh/
authorized_keys2 on your home on the server.
# ssh-keygen -t dsa -N ''
# cat ~/.ssh/id_dsa.pub | ssh you@host-server "cat - >> ~/.ssh/authorized_keys2"

Using the Windows client from ssh.com

The non commercial version of the ssh.com client can be downloaded the main ftp site:
ftp.ssh.com/pub/ssh/. Keys generated by the ssh.com client need to be converted for the
OpenSSH server. This can be done with the ssh-keygen command.
• Create a key pair with the ssh.com client: Settings - User Authentication - Generate
New....
• I use Key type DSA; key length 2048.
• Copy the public key generated by the ssh.com client to the server into the ~/.ssh folder.
• The keys are in C:\Documents and Settings\%USERNAME%\Application
Data\SSH\UserKeys.
• Use the ssh-keygen command on the server to convert the key:
# cd ~/.ssh
# ssh-keygen -i -f keyfilename.pub >> authorized_keys2

Notice: We used a DSA key, RSA is also possible. The key is not protected by a password.

Using putty for Windows

Putty7 is a simple and free ssh client for Windows.

• Create a key pair with the puTTYgen program.
• Save the public and private keys (for example into C:\Documents and
Settings\%USERNAME%\.ssh).
• Copy the public key to the server into the ~/.ssh folder:
7.http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

22
 — SSH SCP —
# scp .ssh/puttykey.pub root@192.168.51.254:.ssh/

• Use the ssh-keygen command on the server to convert the key for OpenSSH:
# cd ~/.ssh
# ssh-keygen -i -f puttykey.pub >> authorized_keys2

• Point the private key location in the putty settings: Connection - SSH - Auth

5 .2 C h e ck f ing e rp rint

At the first login, ssh will ask if the unknown host with the fingerprint has to be stored in the
known hosts. To avoid a man-in-the-middle attack the administrator of the server can send you
the server fingerprint which is then compared on the first login. Use ssh-keygen -l to get the
fingerprint (on the server):
# ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key.pub # For RSA key
2048 61:33:be:9b:ae:6c:36:31:fd:83:98:b7:99:2d:9f:cd /etc/ssh/ssh_host_rsa_key.pub
# ssh-keygen -l -f /etc/ssh/ssh_host_dsa_key.pub # For DSA key (default)
2048 14:4a:aa:d9:73:25:46:6d:0a:48:35:c7:f4:16:d4:ee /etc/ssh/ssh_host_dsa_key.pub

Now the client connecting to this server can verify that he is connecting to the right server:
# ssh linda
The authenticity of host 'linda (192.168.16.54)' can't be established.
DSA key fingerprint is 14:4a:aa:d9:73:25:46:6d:0a:48:35:c7:f4:16:d4:ee.
Are you sure you want to continue connecting (yes/no)? yes

5 .3 Se c u r e f i le t ra ns f e r

Some simple commands:

# scp file.txt host-two:/tmp
# scp joe@host-two:/www/*.html /www/tmp
# scp -r joe@host-two:/www /www/tmp

In Konqueror or Midnight Commander it is possible to access a remote file system with the
address fish://user@gate. However the implementation is very slow.
Furthermore it is possible to mount a remote folder with sshfs a file system client based on SCP.
See fuse sshfs8.

5 .4 T u n n e l i n g

SSH tunneling allows to forward or reverse forward a port over the SSH connection, thus
securing the traffic and accessing ports which would otherwise be blocked. This only works with
TCP. The general nomenclature for forward and reverse is (see also ssh and NAT example):
# ssh -L localport:desthost:destport user@gate # desthost as seen from the gate
# ssh -R destport:desthost:localport user@gate # forwards your localport to destination
# ssh -X user@gate # To force X forwarding

This will connect to gate and forward the local port to the host desthost:destport. Note desthost
is the destination host as seen by the gate, so if the connection is to the gate, then desthost is
localhost. More than one port forward is possible.

Direct forward on the gate

Let say we want to access the CVS (port 2401) and http (port 80) which are running on the gate.
This is the simplest example, desthost is thus localhost, and we use the port 8080 locally instead
of 80 so we don't need to be root. Once the ssh session is open, both services are accessible on
the local ports.
# ssh -L 2401:localhost:2401 -L 8080:localhost:80 user@gate

8.http://fuse.sourceforge.net/sshfs.html

23
 — SSH SCP —
Netbios and remote desktop forward to a second server

Let say a Windows smb server is behind the gate and is not running ssh. We need access to the
smb share and also remote desktop to the server.
# ssh -L 139:smbserver:139 -L 3388:smbserver:3389 user@gate

The smb share can now be accessed with \\127.0.0.1\, but only if the local share is disabled,
because the local share is listening on port 139.
It is possible to keep the local share enabled, for this we need to create a new virtual device with
a new IP address for the tunnel, the smb share will be connected over this address. Furthermore
the local RDP is already listening on 3389, so we choose 3388. For this example let's use a virtual
IP of 10.1.1.1.
• With putty use Source port=10.1.1.1:139. It is possible to create multiple loop devices
and tunnel. On Windows 2000, only putty worked for me.
• With the ssh.com client, disable "Allow local connections only". Since ssh.com will bind to
all addresses, only a single share can be connected.
Now create the loopback interface with IP 10.1.1.1:
• # System->Control Panel->Add Hardware # Yes, Hardware is already connected # Add a
new hardware device (at bottom).
• # Install the hardware that I manually select # Network adapters # Microsoft , Microsoft
Loopback Adapter.
• Configure the IP address of the fake device to 10.1.1.1 mask 255.255.255.0, no gateway.
• advanced->WINS, Enable LMHosts Lookup; Disable NetBIOS over TCP/IP.
• # Enable Client for Microsoft Networks. # Disable File and Printer Sharing for Microsoft
Networks.
I HAD to reboot for this to work. Now connect to the smb share with \\10.1.1.1 and remote
desktop to 10.1.1.1:3388.

Debug
If it is not working:
• Are the ports forwarded: netstat -an? Look at 0.0.0.0:139 or 10.1.1.1:139
• Does telnet 10.1.1.1 139 connect?
• You need the checkbox "Local ports accept connections from other hosts".
• Is "File and Printer Sharing for Microsoft Networks" disabled on the loopback interface?

Connect two clients behind NAT

Suppose two clients are behind a NAT gateway and client cliadmin has to connect to client cliuser
(the destination), both can login to the gate with ssh and are running Linux with sshd. You don't
need root access anywhere as long as the ports on gate are above 1024. We use 2022 on gate.
Also since the gate is used locally, the option GatewayPorts is not necessary.
On client cliuser (from destination to gate):
# ssh -R 2022:localhost:22 user@gate # forwards client 22 to gate:2022

On client cliadmin (from host to gate):

# ssh -L 3022:localhost:2022 admin@gate # forwards client 3022 to gate:2022

Now the admin can connect directly to the client cliuser with:
# ssh -p 3022 admin@localhost # local:3022 -> gate:2022 -> client:22

Connect to VNC behind NAT

Suppose a Windows client with VNC listening on port 5900 has to be accessed from behind NAT.
On client cliwin to gate:
# ssh -R 15900:localhost:5900 user@gate

On client cliadmin (from host to gate):

# ssh -L 5900:localhost:15900 admin@gate

24
 — VPN with SSH —
Now the admin can connect directly to the client VNC with:
# vncconnect -display :0 localhost

6 VPN WITH SSH

As of version 4.3, OpenSSH can use the tun/tap device to encrypt a tunnel. This is very similar to
other TLS based VPN solutions like OpenVPN. One advantage with SSH is that there is no need to
install and configure additional software. Additionally the tunnel uses the SSH authentication like
pre shared keys. The drawback is that the encapsulation is done over TCP which might result in
poor performance on a slow link. Also the tunnel is relying on a single (fragile) TCP connection.
This technique is very useful for a quick IP based VPN setup. There is no limitation as with the
single TCP port forward, all layer 3/4 protocols like ICMP, TCP/UDP, etc. are forwarded over the
VPN. In any case, the following options are needed in the sshd_conf file:
PermitRootLogin yes
PermitTunnel yes

6 .1 Si n g l e P 2 P c o n ne c t i o n

Here we are connecting two hosts, hclient and hserver with a peer to peer tunnel. The connection
is started from hclient to hserver and is done as root. The tunnel end points are 10.0.1.1 (server)
and 10.0.1.2 (client) and we create a device tun5 (this could also be an other number). The
procedure is very simple:
• Connect with SSH using the tunnel option -w
• Configure the IP addresses of the tunnel. Once on the server and once on the client.

Connect to the server

Connection started on the client and commands are executed on the server.

Server is on Linux
cli># ssh -w5:5 root@hserver
srv># ifconfig tun5 10.0.1.1 netmask 255.255.255.252 # Executed on the server shell

Server is on FreeBSD
cli># ssh -w5:5 root@hserver
srv># ifconfig tun5 10.0.1.1 10.0.1.2 # Executed on the server shell

Configure the client

Commands executed on the client:

cli># ifconfig tun5 10.0.1.2 netmask 255.255.255.252 # Client is on Linux
cli># ifconfig tun5 10.0.1.2 10.0.1.1 # Client is on FreeBSD

The two hosts are now connected and can transparently communicate with any layer 3/4 protocol
using the tunnel IP addresses.

6 .2 C on n e ct t w o ne t w o rk s

In addition to the p2p setup above, it is more useful to connect two private networks with an
SSH VPN using two gates. Suppose for the example, netA is 192.168.51.0/24 and netB
192.168.16.0/24. The procedure is similar as above, we only need to add the routing. NAT must
be activated on the private interface only if the gates are not the same as the default gateway of
their network.
192.168.51.0/24 (netA)|gateA <-> gateB|192.168.16.0/24 (netB)
• Connect with SSH using the tunnel option -w.

25
 — RSYNC —
• Configure the IP addresses of the tunnel. Once on the server and once on the client.
• Add the routing for the two networks.
• If necessary, activate NAT on the private interface of the gate.
The setup is started from gateA in netA.

Connect from gateA to gateB

Connection is started from gateA and commands are executed on gateB.

gateB is on Linux
gateA># ssh -w5:5 root@gateB
gateB># ifconfig tun5 10.0.1.1 netmask 255.255.255.252 # Executed on the gateB shell
gateB># route add -net 192.168.51.0 netmask 255.255.255.0 dev tun5
gateB># echo 1 > /proc/sys/net/ipv4/ip_forward # Only needed if not default gw
gateB># iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

gateB is on FreeBSD
gateA># ssh -w5:5 root@gateB # Creates the tun5 devices
gateB># ifconfig tun5 10.0.1.1 10.0.1.2 # Executed on the gateB shell
gateB># route add 192.168.51.0/24 10.0.1.2
gateB># sysctl net.inet.ip.forwarding=1 # Only needed if not default gw
gateB># natd -s -m -u -dynamic -n fxp0 # see NAT (page 17)
gateA># sysctl net.inet.ip.fw.enable=1

Configure gateA

Commands executed on gateA:

gateA is on Linux
gateA># ifconfig tun5 10.0.1.2 netmask 255.255.255.252
gateA># route add -net 192.168.16.0 netmask 255.255.255.0 dev tun5
gateA># echo 1 > /proc/sys/net/ipv4/ip_forward
gateA># iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

gateA is on FreeBSD
gateA># ifconfig tun5 10.0.1.2 10.0.1.1
gateA># route add 192.168.16.0/24 10.0.1.2
gateA># sysctl net.inet.ip.forwarding=1
gateA># natd -s -m -u -dynamic -n fxp0 # see NAT (page 17)
gateA># sysctl net.inet.ip.fw.enable=1

The two private networks are now transparently connected via the SSH VPN. The IP forward and
NAT settings are only necessary if the gates are not the default gateways. In this case the clients
would not know where to forward the response, and nat must be activated.

7 RSYNC
Rsync can almost completely replace cp and scp, furthermore interrupted transfers are efficiently
restarted. A trailing slash (and the absence thereof) has different meanings, the man page is
good... Here some examples:
Copy the directories with full content:
# rsync -a /home/colin/ /backup/colin/
# rsync -a /var/ /var_bak/
# rsync -aR --delete-during /home/user/ /backup/ # use relative (see below)

Same as before but over the network and with compression. Rsync uses SSH for the transport
per default and will use the ssh key if they are set. Use ":" as with SCP. A typical remote copy:
# rsync -axSRzv /home/user/ user@server:/backup/user/

26
 — RSYNC —
Exclude any directory tmp within /home/user/ and keep the relative folders hierarchy, that is the
remote directory will have the structure /backup/home/user/. This is typically used for backups.
# rsync -azR --exclude /tmp/ /home/user/ user@server:/backup/

Use port 20022 for the ssh connection:

# rsync -az -e 'ssh -p 20022' /home/colin/ user@server:/backup/colin/

Using the rsync daemon (used with "::") is much faster, but not encrypted over ssh. The location
of /backup is defined by the configuration in /etc/rsyncd.conf. The variable RSYNC_PASSWORD
can be set to avoid the need to enter the password manually.
# rsync -axSRz /home/ ruser@hostname::rmodule/backup/
# rsync -axSRz ruser@hostname::rmodule/backup/ /home/ # To copy back

Some important options:

-a, --archive archive mode; same as -rlptgoD (no -H)
-r, --recursive recurse into directories
-R, --relative use relative path names
-H, --hard-links preserve hard links
-S, --sparse handle sparse files efficiently
-x, --one-file-system don't cross file system boundaries
--exclude=PATTERN exclude files matching PATTERN
--delete-during receiver deletes during xfer, not before
--delete-after receiver deletes after transfer, not before

7 .1 R s y n c o n W ind o w s

Rsync is available for Windows through cygwin or as stand-alone packaged in cwrsync9. This is
very convenient for automated backups. Install one of them (not both) and add the path to the
Windows system variables: # Control Panel -> System -> tab Advanced, button Environment
Variables. Edit the "Path" system variable and add the full path to the installed rsync, e.g.
C:\Program Files\cwRsync\bin or C:\cygwin\bin. This way the commands rsync and ssh are
available in a Windows command shell.

Public key authentication

Rsync is automatically tunneled over SSH and thus uses the SSH authentication on the server.
Automatic backups have to avoid a user interaction, for this the SSH public key authentication
can be used and the rsync command will run without a password.
All the following commands are executed within a Windows console. In a console (Start -> Run
-> cmd) create and upload the key as described in SSH, change "user" and "server" as
appropriate. If the file authorized_keys2 does not exist yet, simply copy id_dsa.pub to
authorized_keys2 and upload it.
# ssh-keygen -t dsa -N '' # Creates a public and a private key
# rsync user@server:.ssh/authorized_keys2 . # Copy the file locally from the server
# cat id_dsa.pub >> authorized_keys2 # Or use an editor to add the key
# rsync authorized_keys2 user@server:.ssh/ # Copy the file back to the server
# del authorized_keys2 # Remove the local copy

Now test it with (in one line):

rsync -rv "/cygdrive/c/Documents and Settings/%USERNAME%/My Documents/" \
'user@server:My\ Documents/'

Automatic backup

Use a batch file to automate the backup and add the file in the scheduled tasks (Programs ->
Accessories -> System Tools -> Scheduled Tasks). For example create the file backup.bat and
replace user@server.
9.http://sourceforge.net/projects/sereds

27
 — SUDO —
@ECHO OFF
REM rsync the directory My Documents
SETLOCAL
SET CWRSYNCHOME=C:\PROGRAM FILES\CWRSYNC
SET CYGWIN=nontsec
SET CWOLDPATH=%PATH%
REM uncomment the next line when using cygwin
SET PATH=%CWRSYNCHOME%\BIN;%PATH%
echo Press Control-C to abort
rsync -av "/cygdrive/c/Documents and Settings/%USERNAME%/My Documents/" \
'user@server:My\ Documents/'
pause

8 SUDO
Sudo is a standard way to give users some administrative rights without giving out the root
password. Sudo is very useful in a multi user environment with a mix of server and workstations.
Simply call the command with sudo:
# sudo /etc/init.d/dhcpd restart # Run the rc script as root
# sudo -u sysadmin whoami # Run cmd as an other user

8 .1 C on f i g ura t i o n

Sudo is configured in /etc/sudoers and must only be edited with visudo. The basic syntax is
(the lists are comma separated):
user hosts = (runas) commands # In /etc/sudoers

users one or more users or %group (like %wheel) to gain the rights
hosts list of hosts (or ALL)
runas list of users (or ALL) that the command rule can be run as. It is enclosed in ( )!
commands list of commands (or ALL) that will be run as root or as (runas)
Additionally those keywords can be defined as alias, they are called User_Alias, Host_Alias,
Runas_Alias and Cmnd_Alias. This is useful for larger setups. Here a sudoers example:
# cat /etc/sudoers
# Host aliases are subnets or hostnames.
Host_Alias DMZ = 212.118.81.40/28
Host_Alias DESKTOP = work1, work2

# User aliases are a list of users which can have the same rights
User_Alias ADMINS = colin, luca, admin
User_Alias DEVEL = joe, jack, julia
Runas_Alias DBA = oracle,pgsql

# Command aliases define the full path of a list of commands

Cmnd_Alias SYSTEM = /sbin/reboot,/usr/bin/kill,/sbin/halt,/sbin/shutdown,/etc/init.d/
Cmnd_Alias PW = /usr/bin/passwd [A-z]*, !/usr/bin/passwd root # Not root pwd!
Cmnd_Alias DEBUG = /usr/sbin/tcpdump,/usr/bin/wireshark,/usr/bin/nmap

# The actual rules

root,ADMINS ALL = (ALL) NOPASSWD: ALL # ADMINS can do anything w/o a password.
DEVEL DESKTOP = (ALL) NOPASSWD: ALL # Developers have full right on desktops
DEVEL DMZ = (ALL) NOPASSWD: DEBUG # Developers can debug the DMZ servers.

# User sysadmin can mess around in the DMZ servers with some commands.
sysadmin DMZ = (ALL) NOPASSWD: SYSTEM,PW,DEBUG
sysadmin ALL,!DMZ = (ALL) NOPASSWD: ALL # Can do anything outside the DMZ.
%dba ALL = (DBA) ALL # Group dba can run as database user.

28
 — Encrypt Files —
# anyone can mount/unmount a cd-rom on the desktop machines
ALL DESKTOP = NOPASSWD: /sbin/mount /cdrom,/sbin/umount /cdrom

9 ENCRYPT FILES

9 .1 Op e n SS L

A single file

Encrypt and decrypt:

# openssl des -salt -in file -out file.des
# openssl des -d -salt -in file.des -out file

Note that the file can of course be a tar archive.

tar and encrypt a whole directory

# tar -cf - directory | openssl des -salt -out directory.tar.des # Encrypt

# openssl des -d -salt -in directory.tar.des | tar -x # Decrypt

tar zip and encrypt a whole directory

# tar -zcf - directory | openssl des -salt -out directory.tar.gz.des # Encrypt

# openssl des -d -salt -in directory.tar.gz.des | tar -xz # Decrypt

• Use -k mysecretpassword after des to avoid the interactive password request. However
note that this is highly insecure.
• Use des3 instead of des to get even stronger encryption (Triple-DES Cipher). This uses
also more CPU.

9 .2 GP G

GnuPG is well known to encrypt and sign emails or any data. Furthermore gpg and also provides
an advanced key management system. This section only covers files encryption, not email usage,
signing or the Web-Of-Trust.
The simplest encryption is with a symmetric cipher. In this case the file is encrypted with a
password and anyone who knows the password can decrypt it, thus the keys are not needed.
Gpg adds an extention ".gpg" to the encrypted file names.
# gpg -c file # Encrypt file with password
# gpg file.gpg # Decrypt file (optionally -o otherfile)

Using keys

For more details see GPG Quick Start10 and GPG/PGP Basics11 and the gnupg documentation12
among others.
The private and public keys are the heart of asymmetric cryptography. What is important to
remember:
• Your public key is used by others to encrypt files that only you as the receiver can
decrypt (not even the one who encrypted the file can decrypt it). The public key is thus
meant to be distributed.
• Your private key is encrypted with your passphrase and is used to decrypt files which
where encrypted with your public key. The private key must be kept secure. Also if the
key or passphrase is lost, so are all the files encrypted with your public key.
• The key files are called keyrings as they can contain more than one key.

10.http://www.madboa.com/geek/gpg-quickstart
11.http://aplawrence.com/Basics/gpg.html
12.http://gnupg.org/documentation

29
 — Encrypt Partitions —
First generate a key pair. The defaults are fine, however you will have to enter at least your full
name and email and optionally a comment. The comment is useful to create more than one key
with the same name and email. Also you should use a "passphrase", not a simple password.
# gpg --gen-key # This can take a long time

The keys are stored in ~/.gnupg/ on Unix, on Windows they are typically stored in
C:/Documents and Settings/%USERNAME%/Application Data/gnupg/.
~/.gnupg/pubring.gpg # Contains your public keys and all others imported
~/.gnupg/secring.gpg # Can contain more than one private key

Short reminder on most used options:

-e encrypt data
-d decrypt data
-r NAME encrypt for recipient NAME (or 'Full Name' or 'email@domain')
-a create ascii armored output of a key
-o use as output file
The examples use 'Your Name' and 'Alice' as the keys are referred to by the email or full name or
partial name. For example I can use 'Colin' or 'c@cb.vu' for my key [Colin Barschel (cb.vu)
<c@cb.vu>].

Encrypt for personal use only

No need to export/import any key for this. You have both already.
# gpg -e -r 'Your Name' file # Encrypt with your public key
# gpg -o file -d file.gpg # Decrypt. Use -o or it goes to stdout

Encrypt - Decrypt with keys

First you need to export your public key for someone else to use it. And you need to import the
public say from Alice to encrypt a file for her. You can either handle the keys in simple ascii files
or use a public key server.
For example Alice export her public key and you import it, you can then encrypt a file for her.
That is only Alice will be able to decrypt it.
# gpg -a -o alicekey.asc --export 'Alice' # Alice exported her key in ascii file.
# gpg --send-keys --keyserver subkeys.pgp.net KEYID # Alice put her key on a server.
# gpg --import alicekey.asc # You import her key into your pubring.
# gpg --search-keys --keyserver subkeys.pgp.net 'Alice' # or get her key from a server.

Once the keys are imported it is very easy to encrypt or decrypt a file:
# gpg -e -r 'Alice' file # Encrypt the file for Alice.
# gpg -d file.gpg -o file # Decrypt a file encrypted by Alice for you.

Key administration

# gpg --list-keys # list public keys and see the KEYIDS

The KEYID follows the '/' e.g. for: pub 1024D/D12B77CE the KEYID is D12B77CE
# gpg --gen-revoke 'Your Name' # generate revocation certificate
# gpg --list-secret-keys # list private keys
# gpg --delete-keys NAME # delete a public key from local key ring
# gpg --delete-secret-key NAME # delete a secret key from local key ring
# gpg --fingerprint KEYID # Show the fingerprint of the key
# gpg --edit-key KEYID # Edit key (e.g sign or add/del email)

10 ENCRYPT PARTITIONS
Linux with LUKS (p31) | Linux dm-crypt only (p31) | FreeBSD GELI (p31) | FBSD pwd only (p32)

There are (many) other alternative methods to encrypt disks, I only show here the methods I
know and use. Keep in mind that the security is only good as long the OS has not been tempered

30
 — Encrypt Partitions —
with. An intruder could easily record the password from the keyboard events. Furthermore the
data is freely accessible when the partition is attached and will not prevent an intruder to have
access to it in this state.

1 0.1 L i n u x

Those instructions use the Linux dm-crypt (device-mapper) facility available on the 2.6 kernel. In
this example, lets encrypt the partition /dev/sdc1, it could be however any other partition or
disk, or USB or a file based partition created with losetup. In this case we would use /dev/
loop0. See file image partition. The device mapper uses labels to identify a partition. We use
sdc1 in this example, but it could be any string.

dm-crypt with LUKS

LUKS with dm-crypt has better encryption and makes it possible to have multiple passphrase for
the same partition or to change the password easily. To test if LUKS is available, simply type #
cryptsetup --help, if nothing about LUKS shows up, use the instructions below Without LUKS.
First create a partition if necessary: fdisk /dev/sdc.

Create encrypted partition

# dd if=/dev/urandom of=/dev/sdc1 # Optional. For paranoids only (takes days)
# cryptsetup -y luksFormat /dev/sdc1 # This destroys any data on sdc1
# cryptsetup luksOpen /dev/sdc1 sdc1
# mkfs.ext3 /dev/mapper/sdc1 # create ext3 file system
# mount -t ext3 /dev/mapper/sdc1 /mnt
# umount /mnt
# cryptsetup luksClose sdc1 # Detach the encrypted partition

Attach
# cryptsetup luksOpen /dev/sdc1 sdc1
# mount -t ext3 /dev/mapper/sdc1 /mnt

Detach
# umount /mnt
# cryptsetup luksClose sdc1

dm-crypt without LUKS

# cryptsetup -y create sdc1 /dev/sdc1 # or any other partition like /dev/loop0

# dmsetup ls # check it, will display: sdc1 (254, 0)
# mkfs.ext3 /dev/mapper/sdc1 # This is done only the first time!
# mount -t ext3 /dev/mapper/sdc1 /mnt
# umount /mnt/
# cryptsetup remove sdc1 # Detach the encrypted partition

Do exactly the same (without the mkfs part!) to re-attach the partition. If the password is not
correct, the mount command will fail. In this case simply remove the map sdc1 (cryptsetup
remove sdc1) and create it again.

1 0.2 F r e e BS D

The two popular FreeBSD disk encryption modules are gbde and geli. I now use geli because it
is faster and also uses the crypto device for hardware acceleration. See The FreeBSD handbook
Chapter 18.613 for all the details. The geli module must be loaded or compiled into the kernel:

13.http://www.freebsd.org/handbook/disks-encrypting.html

31
 — Encrypt Partitions —
options GEOM_ELI
device crypto # or as module:
# echo 'geom_eli_load="YES"' >> /boot/loader.conf # or do: kldload geom_eli

Use password and key

I use those settings for a typical disk encryption, it uses a passphrase AND a key to encrypt the
master key. That is you need both the password and the generated key /root/ad1.key to attach
the partition. The master key is stored inside the partition and is not visible. See below for typical
USB or file based image.

Create encrypted partition

# dd if=/dev/random of=/root/ad1.key bs=64 count=1 # this key encrypts the mater key
# geli init -s 4096 -K /root/ad1.key /dev/ad1 # -s 8192 is also OK for disks
# geli attach -k /root/ad1.key /dev/ad1 # DO make a backup of /root/ad1.key
# dd if=/dev/random of=/dev/ad1.eli bs=1m # Optional and takes a long time
# newfs /dev/ad1.eli # Create file system
# mount /dev/ad1.eli /mnt

Attach
# geli attach -k /root/ad1.key /dev/ad1
# fsck -ny -t ffs /dev/ad1.eli # In doubt check the file system
# mount /dev/ad1.eli /mnt

Detach
The detach procedure is done automatically on shutdown.
# umount /mnt
# geli detach /dev/ad1.eli

/etc/fstab
The encrypted partition can be configured to be mounted with /etc/fstab. The password will be
prompted when booting. The following settings are required for this example:
# grep geli /etc/rc.conf
geli_devices="ad1"
geli_ad1_flags="-k /root/ad1.key"
# grep geli /etc/fstab
/dev/ad1.eli /home/private ufs rw 0 0

Use password only

It is more convenient to encrypt a USB stick or file based image with a passphrase only and no
key. In this case it is not necessary to carry the additional key file around. The procedure is very
much the same as above, simply without the key file. Let's encrypt a file based image
/cryptedfile of 1 GB.
# dd if=/dev/zero of=/cryptedfile bs=1M count=1000 # 1 GB file
# mdconfig -at vnode -f /cryptedfile
# geli init /dev/md0 # encrypts with password only
# geli attach /dev/md0
# newfs -U -m 0 /dev/md0.eli
# mount /dev/md0.eli /mnt
# umount /dev/md0.eli
# geli detach md0.eli

It is now possible to mount this image on an other system with the password only.
# mdconfig -at vnode -f /cryptedfile
# geli attach /dev/md0
# mount /dev/md0.eli /mnt

32
 — SSL Certificates —

11 SSL CERTIFICATES
So called SSL/TLS certificates are cryptographic public key certificates and are composed of a
public and a private key. The certificates are used to authenticate the endpoints and encrypt the
data. They are used for example on a web server (https) or mail server (imaps).

1 1.1 P r o ce d u re

• We need a certificate authority to sign our certificate. This step is usually provided by a
vendor like Thawte, Verisign, etc., however we can also create our own.
• Create a certificate signing request. This request is like an unsigned certificate (the public
part) and already contains all necessary information. The certificate request is normally
sent to the authority vendor for signing. This step also creates the private key on the
local machine.
• Sign the certificate with the certificate authority.
• If necessary join the certificate and the key in a single file to be used by the application
(web server, mail server etc.).

1 1.2 C on f i g u re O p e nS S L

We use /usr/local/certs as directory for this example check or edit /etc/ssl/openssl.cnf

accordingly to your settings so you know where the files will be created. Here are the relevant
part of openssl.cnf:
[ CA_default ]
dir = /usr/local/certs/CA # Where everything is kept
certs = $dir/certs # Where the issued certs are kept
crl_dir = $dir/crl # Where the issued crl are kept
database = $dir/index.txt # database index file.

Make sure the directories exist or create them

# mkdir -p /usr/local/certs/CA
# cd /usr/local/certs/CA
# mkdir certs crl newcerts private
# echo "01" > serial # Only if serial does not exist
# touch index.txt

1 1.3 C r e a t e a c e rt ific a t e a u t h o r i t y

If you do not have a certificate authority from a vendor, you'll have to create your own. This step
is not necessary if one intend to use a vendor to sign the request. To make a certificate authority
(CA):
# openssl req -new -x509 -days 730 -config /etc/ssl/openssl.cnf \
-keyout CA/private/cakey.pem -out CA/cacert.pem

1 1.4 C r e a t e a c e rt ific a t e s ig n i n g r eq u es t

To make a new certificate (for mail server or web server for example), first create a request
certificate with its private key. If your application do not support encrypted private key (for
example UW-IMAP does not), then disable encryption with -nodes.
# openssl req -new -keyout newkey.pem -out newreq.pem \
-config /etc/ssl/openssl.cnf
# openssl req -nodes -new -keyout newkey.pem -out newreq.pem \
-config /etc/ssl/openssl.cnf # No encryption for the key

33
 — CVS —
1 1.5 Si gn t h e c e rt ific a t e

The certificate request has to be signed by the CA to be valid, this step is usually done by the
vendor. Note: replace "servername" with the name of your server in the next commands.
# cat newreq.pem newkey.pem > new.pem
# openssl ca -policy policy_anything -out servernamecert.pem \
-config /etc/ssl/openssl.cnf -infiles new.pem
# mv newkey.pem servernamekey.pem

Now servernamekey.pem is the private key and servernamecert.pem is the server certificate.

1 1.6 C r e a t e un it e d c e rt ific at e

The IMAP server wants to have both private key and server certificate in the same file. And in
general, this is also easier to handle, but the file has to be kept securely!. Apache also can deal
with it well. Create a file servername.pem containing both the certificate and key.
• Open the private key (servernamekey.pem) with a text editor and copy the private key
into the "servername.pem" file.
• Do the same with the server certificate (servernamecert.pem).
The final servername.pem file should look like this:

-----BEGIN RSA PRIVATE KEY-----

MIICXQIBAAKBgQDutWy+o/XZ/[...]qK5LqQgT3c9dU6fcR+WuSs6aejdEDDqBRQ
-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIIERzCCA7CgAwIBAgIBBDANB[...]iG9w0BAQQFADCBxTELMAkGA1UEBhMCREUx
-----END CERTIFICATE-----

What we have now in the directory /usr/local/certs/:

CA/private/cakey.pem (CA server private key)
CA/cacert.pem (CA server public key)
certs/servernamekey.pem (server private key)
certs/servernamecert.pem (server signed certificate)
certs/servername.pem (server certificate with private key)
Keep the private key secure!

1 1.7 Vi e w c e rt i fic a t e inf o rm a t i o n

To view the certificate information simply do:

# openssl x509 -text -in servernamecert.pem # View the certificate info
# openssl req -noout -text -in server.csr # View the request info
# openssl s_client -connect cb.vu:443 # Check a web server certificate

12 CVS
Server setup (p34) | CVS test (p36) | SSH tunneling (p36) | CVS usage (p37)

1 2.1 Se r ve r s e t u p

Initiate the CVS

Decide where the main repository will rest and create a root cvs. For example /usr/local/cvs (as
root):
# mkdir -p /usr/local/cvs
# setenv CVSROOT /usr/local/cvs # Set CVSROOT to the new location (local)
# cvs init # Creates all internal CVS config files
# cd /root

34
 — CVS —
# cvs checkout CVSROOT # Checkout the config files to modify them
# cd CVSROOT
edit config ( fine as it is)
# cvs commit config
cat >> writers # Create a writers file (optionally also readers)
colin
^D # Use [Control][D] to quit the edit
# cvs add writers # Add the file writers into the repository
# cvs edit checkoutlist
# cat >> checkoutlist
writers
^D # Use [Control][D] to quit the edit
# cvs commit # Commit all the configuration changes

Add a readers file if you want to differentiate read and write permissions Note: Do not (ever)
edit files directly into the main cvs, but rather checkout the file, modify it and check it in. We did
this with the file writers to define the write access.
There are three popular ways to access the CVS at this point. The first two don't need any further
configuration. See the examples on CVSROOT below for how to use them:
• Direct local access to the file system. The user(s) need sufficient file permission to access
the CS directly and there is no further authentication in addition to the OS login. However
this is only useful if the repository is local.
• Remote access with ssh with the ext protocol. Any use with an ssh shell account and
read/write permissions on the CVS server can access the CVS directly with ext over ssh
without any additional tunnel. There is no server process running on the CVS for this to
work. The ssh login does the authentication.
• Remote access with pserver. This is the preferred use for larger user base as the users
are authenticated by the CVS pserver with a dedicated password database, there is
therefore no need for local users accounts. This setup is explained below.

Network setup with inetd

The CVS can be run locally only if a network access is not needed. For a remote access, the
daemon inetd can start the pserver with the following line in /etc/inetd.conf (/etc/xinetd.d/cvs on
SuSE):
cvspserver stream tcp nowait cvs /usr/bin/cvs cvs \
--allow-root=/usr/local/cvs pserver

It is a good idea to block the cvs port from the Internet with the firewall and use an ssh tunnel to
access the repository remotely.

Separate authentication

It is possible to have cvs users which are not part of the OS (no local users). This is actually
probably wanted too from the security point of view. Simply add a file named passwd (in the
CVSROOT directory) containing the users login and password in the crypt format. This is can be
done with the apache htpasswd tool.
Note: This passwd file is the only file which has to be edited directly in the CVSROOT directory.
Also it won't be checked out. More info with htpasswd --help
# htpasswd -cb passwd user1 password1 # -c creates the file
# htpasswd -b passwd user2 password2

Now add :cvs at the end of each line to tell the cvs server to change the user to cvs (or
whatever your cvs server is running under). It looks like this:
# cat passwd
user1:xsFjhU22u8Fuo:cvs
user2:vnefJOsnnvToM:cvs

35
 — CVS —
1 2.2 T e s t i t

Test the login as normal user (for example here me)

# cvs -d :pserver:colin@192.168.50.254:/usr/local/cvs login
Logging in to :pserver:colin@192.168.50.254:2401/usr/local/cvs
CVS password:

CVSROOT variable

This is an environment variable used to specify the location of the repository we're doing
operations on. For local use, it can be just set to the directory of the repository. For use over the
network, the transport protocol must be specified. Set the CVSROOT variable with setenv
CVSROOT string on a csh, tcsh shell, or with export CVSROOT=string on a sh, bash shell.
# setenv CVSROOT :pserver:<username>@<host>:/cvsdirectory
For example:
# setenv CVSROOT /usr/local/cvs # Used locally only
# setenv CVSROOT :local:/usr/local/cvs # Same as above
# setenv CVSROOT :ext:user@cvsserver:/usr/local/cvs # Direct access with SSH
# setenv CVS_RSH ssh # for the ext access
# setenv CVSROOT :pserver:user@cvsserver.254:/usr/local/cvs # network with pserver

When the login succeeded one can import a new project into the repository: cd into your project
root directory
cvs import <module name> <vendor tag> <initial tag>
cvs -d :pserver:colin@192.168.50.254:/usr/local/cvs import MyProject MyCompany START

Where MyProject is the name of the new project in the repository (used later to checkout). Cvs
will import the current directory content into the new project.

To checkout:
# cvs -d :pserver:colin@192.168.50.254:/usr/local/cvs checkout MyProject
or
# setenv CVSROOT :pserver:colin@192.168.50.254:/usr/local/cvs
# cvs checkout MyProject

1 2.3 SSH t u n ne ling fo r C V S

We need 2 shells for this. On the first shell we connect to the cvs server with ssh and
port-forward the cvs connection. On the second shell we use the cvs normally as if it where
running locally.
on shell 1:
# ssh -L2401:localhost:2401 colin@cvs_server # Connect directly to the CVS server. Or:
# ssh -L2401:cvs_server:2401 colin@gateway # Use a gateway to reach the CVS

on shell 2:
# setenv CVSROOT :pserver:colin@localhost:/usr/local/cvs
# cvs login
Logging in to :pserver:colin@localhost:2401/usr/local/cvs
CVS password:
# cvs checkout MyProject/src

36
 — SVN —
1 2.4 C VS co mma nd s a nd us a g e

Import

The import command is used to add a whole directory, it must be run from within the directory to
be imported. Say the directory /devel/ contains all files and subdirectories to be imported. The
directory name on the CVS (the module) will be called "myapp".
# cvs import [options] directory-name vendor-tag release-tag
# cd /devel # Must be inside the project to import it
# cvs import myapp Company R1_0 # Release tag can be anything in one word

After a while a new directory "/devel/tools/" was added and it has to be imported too.
# cd /devel/tools
# cvs import myapp/tools Company R1_0

Checkout update add commit

# cvs co myapp/tools # Will only checkout the directory tools

# cvs co -r R1_1 myapp # Checkout myapp at release R1_1 (is sticky)
# cvs -q -d update -P # A typical CVS update
# cvs update -A # Reset any sticky tag (or date, option)
# cvs add newfile # Add a new file
# cvs add -kb newfile # Add a new binary file
# cvs commit file1 file2 # Commit the two files only
# cvs commit -m "message" # Commit all changes done with a message

Create a patch

It is best to create and apply a patch from the working development directory related to the
project, or from within the source directory.
# cd /devel/project
# diff -Naur olddir newdir > patchfile # Create a patch from a directory or a file
# diff -Naur oldfile newfile > patchfile

Apply a patch

Sometimes it is necessary to strip a directory level from the patch, depending how it was
created. In case of difficulties, simply look at the first lines of the patch and try -p0, -p1 or -p2.
# cd /devel/project
# patch --dry-run -p0 < patchfile # Test the path without applying it
# patch -p0 < patchfile
# patch -p1 < patchfile # strip off the 1st level from the path

13 SVN
Server setup (p37) | SVN+SSH (p38) | SVN over http (p38) | SVN usage (p39)

Subversion (SVN)14 is a version control system designed to be the successor of CVS (Concurrent
Versions System). The concept is similar to CVS, but many shortcomings where improved. See
also the SVN book15.

1 3.1 Se r ve r s e t u p

The initiation of the repository is fairly simple (here for example /home/svn/ must exist):
# svnadmin create --fs-type fsfs /home/svn/project1

14.http://subversion.tigris.org/
15.http://svnbook.red-bean.com/en/1.4/

37
 — SVN —
Now the access to the repository is made possible with:
• file:// Direct file system access with the svn client with. This requires local permissions
on the file system.
• svn:// or svn+ssh:// Remote access with the svnserve server (also over SSH). This
requires local permissions on the file system.
• http:// Remote access with webdav using apache. No local users are necessary for this
method.
Using the local file system, it is now possible to import and then check out an existing project.
Unlike with CVS it is not necessary to cd into the project directory, simply give the full path:
# svn import /project1/ file:///home/svn/project1/trunk -m 'Initial import'
# svn checkout file:///home/svn/project1

The new directory "trunk" is only a convention, this is not required.

Remote access with ssh

No special setup is required to access the repository via ssh, simply replace file:// with
svn+ssh/hostname. For example:
# svn checkout svn+ssh://hostname/home/svn/project1

As with the local file access, every user needs an ssh access to the server (with a local account)
and also read/write access. This method might be suitable for a small group. All users could
belong to a subversion group which owns the repository, for example:
# groupadd subversion
# groupmod -A user1 subversion
# chown -R root:subversion /home/svn
# chmod -R 770 /home/svn

Remote access with http (apache)

Remote access over http (https) is the only good solution for a larger user group. This method
uses the apache authentication, not the local accounts. This is a typical but small apache
configuration:
LoadModule dav_module modules/mod_dav.so
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so # Only for access control
<Location /svn>
DAV svn
# any "/svn/foo" URL will map to a repository /home/svn/foo
SVNParentPath /home/svn
AuthType Basic
AuthName "Subversion repository"
AuthzSVNAccessFile /etc/apache2/svn.acl
AuthUserFile /etc/apache2/svn-passwd
Require valid-user
</Location>

The apache server needs full access to the repository:

# chown -R www:www /home/svn

Create a user with htpasswd2:

# htpasswd -c /etc/svn-passwd user1 # -c creates the file

Access control svn.acl example

# Default it read access. "* =" would be default no access
[/]
* = r
[groups]
project1-developers = joe, jack, jane

38
 — Useful Commands —
# Give write access to the developers
[project1:]
@project1-developers = rw

1 3.2 SVN c o m ma nd s a nd us a g e

See also the Subversion Quick Reference Card16. Tortoise SVN17 is a nice Windows interface.

Import

A new project, that is a directory with some files, is imported into the repository with the import
command. Import is also used to add a directory with its content to an existing project.
# svn help import # Get help for any command
# Add a new directory (with content) into the src dir on project1
# svn import /project1/newdir http://host.url/svn/project1/trunk/src -m 'add newdir'

Typical SVN commands

# svn co http://host.url/svn/project1/trunk # Checkout the most recent version

# Tags and branches are created by copying
# svn mkdir http://host.url/svn/project1/tags/ # Create the tags directory
# svn copy -m "Tag rc1 rel." http://host.url/svn/project1/trunk \
http://host.url/svn/project1/tags/1.0rc1
# svn status [--verbose] # Check files status into working dir
# svn add src/file.h src/file.cpp # Add two files
# svn commit -m 'Added new class file' # Commit the changes with a message
# svn ls http://host.url/svn/project1/tags/ # List all tags
# svn move foo.c bar.c # Move (rename) files
# svn delete some_old_file # Delete files

14 USEFUL COMMANDS
less (p39) | vi (p39) | mail (p40) | tar (p40) | dd (p41) | screen (p42) | find (p43) |
Miscellaneous (p43)

1 4.1 l e s s

The less command displays a text document on the console. It is present on most installation.
# less unixtoolbox.xhtml

Some important commands are (^N stands for [control]-[N]):

hH good help on display
f ^F ^V SPACE Forward one window (or N lines).
b ^B ESC-v Backward one window (or N lines).
F Forward forever; like "tail -f".
/pattern Search forward for (N-th) matching line.
?pattern Search backward for (N-th) matching line.
n Repeat previous search (for N-th occurrence).
N Repeat previous search in reverse direction.
q quit

1 4.2 v i

Vi is present on ANY Linux/Unix installation (not gentoo?) and it is therefore useful to know some
basic commands. There are two modes: command mode and insertion mode. The commands

16.http://www.cs.put.poznan.pl/csobaniec/Papers/svn-refcard.pdf
17.http://tortoisesvn.tigris.org

39
 — Useful Commands —
mode is accessed with [ESC], the insertion mode with i. Use : help if you are lost.
The editors nano and pico are usually available too and are easier (IMHO) to use.

Quit

:w newfilename save the file to newfilename

:wq or :x save and quit
:q! quit without saving

Search and move

/string Search forward for string

?string Search back for string
n Search for next instance of string
N Search for previous instance of string
{ Move a paragraph back
} Move a paragraph forward
1G Move to the first line of the file
nG Move to the n th line of the file
G Move to the last line of the file
:%s/OLD/NEW/g Search and replace every occurrence

Delete text

dd delete current line

D Delete to the end of the line
dw Delete word
x Delete character
u Undo last
U Undo all changes to current line

1 4.3 m a i l

The mail command is a basic application to read and send email, it is usually installed. To send
an email simply type "mail user@domain". The first line is the subject, then the mail content.
Terminate and send the email with a single dot (.) in a new line. Example:
# mail c@cb.vu
Subject: Your text is full of typos
"For a moment, nothing happened. Then, after a second or so,
nothing continued to happen."
.
EOT
#

This is also working with a pipe:

# echo "This is the mail body" | mail c@cb.vu

This is also a simple way to test the mail server.

1 4.4 t a r

The command tar (tape archive) creates and extracts archives of file and directories. The
archive .tar is uncompressed, a compressed archive has the extension .tgz or .tar.gz (zip) or .tbz
(bzip2). Do not use absolute path when creating an archive, you probably want to unpack it
somewhere else. Some typical commands are:

40
 — Useful Commands —
Create

# cd /
# tar -cf home.tar home/ # archive the whole /home directory (c for create)
# tar -czf home.tgz home/ # same with zip compression
# tar -cjf home.tbz home/ # same with bzip2 compression

Only include one (or two) directories from a tree, but keep the relative structure. For example
archive /usr/local/etc and /usr/local/www and the first directory in the archive should be local/.
# tar -C /usr -czf local.tgz local/etc local/www
# tar -C /usr -xzf local.tgz # To untar the local dir into /usr
# cd /usr; tar -xzf local.tgz # Is the same as above

Extract

# tar -tzf home.tgz # look inside the archive without extracting (list)
# tar -xf home.tar # extract the archive here (x for extract)
# tar -xzf home.tgz # same with zip compression
# tar -xjf home.tgz # same with bzip2 compression
# tar -xjf home.tgz home/colin/file.txt # Restore a single file

More advanced

# tar c dir/ | gzip | ssh user@remote 'dd of=dir.tgz' # arch dir/ and store remotely.
# tar cvf - `find . -print` > backup.tar # arch the current directory.
# tar -cf - -C /etc . | tar xpf - -C /backup/etc # Copy directories
# tar -cf - -C /etc . | ssh user@remote tar xpf - -C /backup/etc # Remote copy.
# tar -czf home.tgz --exclude '*.o' --exclude 'tmp/' home/

1 4.5 d d

The program dd (disk dump or destroy disk or see the meaning of dd) is used to copy partitions
and disks and for other copy tricks. Typical usage:
# dd if=<source> of=<target> bs=<byte size> conv=<conversion>

Important conv options:

notrunc do not truncate the output file, all zeros will be written as zeros.
noerror continue after read errors (e.g. bad blocks)
sync pad every input block with Nulls to ibs-size
The default byte size is 512 (one block). The MBR, where the partiton table is located, is on the
first block, the first 63 blocks of a disk are empty. Larger byte sizes are faster to copy but require
also more memory.

Backup and restore

# dd if=/dev/hda of=/dev/hdc bs=16065b # Copy disk to disk (same size)

# dd if=/dev/sda7 of /home/root.img bs=4096 conv=notrunc,noerror # Backup /
# dd if /home/root.img of=/dev/sda7 bs=4096 conv=notrunc,noerror # Restore /
# dd bs=1M if=/dev/ad4s3e | gzip -c > ad4s3e.gz # Zip the backup
# gunzip -dc ad4s3e.gz | dd of=/dev/ad0s3e bs=1M # Restore the zip
# dd bs=1M if=/dev/ad4s3e | gzip | ssh eedcoba@fry 'dd of=ad4s3e.gz' # also remote
# gunzip -dc ad4s3e.gz | ssh eedcoba@host 'dd of=/dev/ad0s3e bs=1M'
# dd if=/dev/ad0 of=/dev/ad2 skip=1 seek=1 bs=4k conv=noerror # Skip MBR
# This is necessary if the destination (ad2) is smaller.

Recover

The command dd will read every single block of the partiton, even the blocks. In case of
problems it is better to use the option conv=sync,noerror so dd will skip the bad block and write
zeros at the destination. Accordingly it is important to set the block size equal or smaller than the

41
 — Useful Commands —
disk block size. A 1k size seems safe, set it with bs=1k. If a disk has bad sectors and the data
should be recovered from a partiton, create an image file with dd, mount the image and copy the
content to a new disk. With the option noerror, dd will skip the bad sectors and write zeros
instead, thus only the data contained in the bad sectors will be lost.
# dd if=/dev/hda of=/dev/null bs=1m # Check for bad blocks
# dd bs=1k if=/dev/hda1 conv=sync,noerror,notrunc | gzip | ssh \ # Send to remote
root@fry 'dd of=hda1.gz bs=1k'
# dd bs=1k if=/dev/hda1 conv=sync,noerror,notrunc of=hda1.img # Store into an image
# mount -o loop /hda1.img /mnt # Mount the image (page 13)
# rsync -ax /mnt/ /newdisk/ # Copy on a new disk
# dd if=/dev/hda of=/dev/hda # Refresh the magnetic state
# The above is useful to refresh a disk. It is perfectly safe, but must be unmounted.

Delete

# dd if=/dev/zero of=/dev/hdc # Delete full disk

# dd if=/dev/urandom of=/dev/hdc # Delete full disk better
# kill -USR1 PID # View dd progress (Linux only!)

MBR tricks

The MBR contains the boot loader and the partition table and is 512 bytes small. The first 446 are
for the boot loader, the bytes 446 to 512 are for the partition table.
# dd if=/dev/sda of=/mbr_sda.bak bs=512 count=1 # Backup the full MBR
# dd if=/dev/zero of=/dev/sda bs=512 count=1 # Delete MBR and partiton table
# dd if=/mbr_sda.bak of=/dev/sda bs=512 count=1 # Restore the full MBR
# dd if=/mbr_sda.bak of=/dev/sda bs=446 count=1 # Restore only the boot loader
# dd if=/mbr_sda.bak of=/dev/sda bs=1 count=64 skip=446 seek=446 # Restore partition table

1 4.6 s cr e e n

Screen has two main functionalities:

• Run multiple terminal session within a single terminal.
• A started program is decoupled from the real terminal and can thus run in the
background. The real terminal can be closed and reattached later.

Short start example

start screen with:

# screen

Within the screen session we can start a long lasting program (like top). Detach the terminal and
reattach the same terminal from an other machine (over ssh for example).
# top

Now detach with Ctrl-a Ctrl-d. Reattach the terminal with

# screen -r

or better:
# screen -R -D

Attach here and now. In detail this means: If a session is running, then reattach. If necessary
detach and logout remotely first. If it was not running create it and notify the user.

Screen commands (within screen)

All screen commands start with Ctrl-a.

• Ctrl-a ? help and summary of functions
• Ctrl-a c create an new window (terminal)

42
 — Useful Commands —
• Ctrl-a Ctrl-n and Ctrl-a Ctrl-p to switch to the next or previous window in the list, by
number.
• Ctrl-a Ctrl-N where N is a number from 0 to 9, to switch to the corresponding window.
• Ctrl-a " to get a navigable list of running windows
• Ctrl-a a to clear a missed Ctrl-a
• Ctrl-a Ctrl-d to disconnect and leave the session running in the background
• Ctrl-a x lock the screen terminal with a password
The screen session is terminated when the program within the running terminal is closed and you
logout from the terminal.

1 4.7 F i n d

Some important options:

-x (on BSD) -xdev (on Linux) Stay on the same file system (dev in fstab).
-exec cmd {} \; Execute the command and replace {} with the full path
-iname Like -name but is case insensitive
-ls Display information about the file (like ls -la)
-size n n is +-n (k M G T P)
-cmin n File's status was last changed n minutes ago.
# find . -type f ! -perm -444 # Find files not readable by all
# find . -type d ! -perm -111 # Find dirs not accessible by all
# find /home/user/ -cmin 10 -print # Files created or modified in the last 10 min.
# find . -name '*.[ch]' | xargs grep -E 'expr' # Search 'expr' in this dir and below.
# find / -name "*.core" | xargs rm # Find core dumps and delete them (also try core.*)
# find / -name "*.core" -print -exec rm {} \; # Other syntax
# Find images and create an archive, iname is not case sensitive. -r for append
# find . \( -iname "*.png" -o -iname "*.jpg" \) -print -exec tar -rf images.tar {} \;
# find . -type f -name "*.txt" ! -name README.txt -print # Exclude README.txt files
# find /var/ -size +10M -exec ls -lh {} \; # Find large files > 10 MB
# find /var/ -size +10M -ls # This is simpler
# find . -size +10M -size -50M -print
# find /usr/ports/ -name work -type d -print -exec rm -rf {} \; # Clean the ports
# Find files with SUID; those file are vulnerable and must be kept secure
# find / -type f -user root -perm -4000 -exec ls -l {} \;

Be careful with xarg or exec as it might or might not honor quotings and can return wrong results
when files or directories contain spaces. In doubt use "-print0 | xargs -0" instead of "| xargs".
The option -print0 must be the last in the find command. See this nice mini tutorial for find18.
# find . -type f | xargs ls -l # Will not work with spaces in names
# find . -type f -print0 | xargs -0 ls -l # Will work with spaces in names
# find . -type f -exec ls -l '{}' \; # Or use quotes '{}' with -exec

1 4.8 Mi s c e l l a n e o u s

# which command # Show full path name of command

# time command # See how long a command takes to execute
# time cat # Use time as stopwatch. Ctrl-c to stop
# set | grep $USER # List the current environment
# cal -3 # Display a three month calendar
# date [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]]
# date 10022155 # Set date and time
# whatis grep # Display a short info on the command or word
# whereis java # Search path and standard directories for word
# setenv varname value # Set env. variable varname to value (csh/tcsh)
# export varname="value" # set env. variable varname to value (sh/ksh/bash)
# pwd # Print working directory
# mkdir -p /path/to/dir # no error if existing, make parent dirs as needed
# mkdir -p project/{bin,src,obj,doc/{html,man,pdf},debug/some/more/dirs}
18.http://www.hccfl.edu/pollock/Unix/FindCmd.htm

43
 — Install Software —
# rmdir /path/to/dir # Remove directory
# rm -rf /path/to/dir # Remove directory and its content (force)
# cp -la /dir1 /dir2 # Archive and hard link files instead of copy
# cp -lpR /dir1 /dir2 # Same for FreeBSD
# cp unixtoolbox.xhtml{,.bak} # Short way to copy the file with a new extension
# mv /dir1 /dir2 # Rename a directory

15 INSTALL SOFTWARE

1 5.1 L i s t i ns t a l le d p a c k a g e s

# rpm -qa # List installed packages (RH, SuSE, RPM based)

# dpkg -l # Debian, Ubuntu
# pkg_info # FreeBSD list all installed packages
# pkg_info -W smbd # FreeBSD show which package smbd belongs to
# pkginfo # Solaris

1 5.2 A d d/ r e mo v e s o ft w a re

Front ends: yast2/yast for SuSE, redhat-config-packages for Red Hat.

# rpm -i pkgname.rpm # install the package (RH, SuSE, RPM based)
# rpm -e pkgname # Remove package

Debian

# apt-get update # First update the package lists

# apt-get install emacs # Install the package emacs
# dpkg --remove emacs # Remove the package emacs
# dpkg -S file # find what package a file belongs to

Gentoo

Gentoo uses emerge as the heart of its "Portage" package management system.
# emerge --sync # First sync the local portage tree
# emerge -u packagename # Install or upgrade a package
# emerge -C packagename # Remove the package
# revdep-rebuild # Repair dependencies

Solaris

The <cdrom> path is usually /cdrom/cdrom0.

# pkgadd -d <cdrom>/Solaris_9/Product SUNWgtar
# pkgadd -d SUNWgtar # Add downloaded package (bunzip2 first)
# pkgrm SUNWgtar # Remove the package

FreeBSD

# pkg_add -r rsync # Fetch and install rsync.

# pkg_delete /var/db/pkg/rsync-xx # Delete the rsync package

Set where the packages are fetched from with the PACKAGESITE variable. For example:
# export PACKAGESITE=ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages/Latest/
# or ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/

44
 — Convert Media —
FreeBSD ports

The port tree /usr/ports/ is a collection of software ready to compile and install. The ports are
updated with the program portsnap.
# portsnap fetch extract # Create the tree when running the first time
# portsnap fetch update # Update the port tree
# cd /usr/ports/net/rsync/ # Select the package to install
# make install distclean # Install and cleanup (also see man ports)
# make package # Make a binary package for the port

1 5.3 L i b r a r y p a t h

Due to complex dependencies and runtime linking, programs are difficult to copy to an other
system or distribution. However for small programs with little dependencies, the missing libraries
can be copied over. The runtime libraries (and the missing one) are checked with ldd and
managed with ldconfig.
# ldd /usr/bin/rsync # List all needed runtime libraries
# ldconfig -n /path/to/libs/ # Add a path to the shared libraries directories
# ldconfig -m /path/to/libs/ # FreeBSD
# LD_LIBRARY_PATH # The variable set the link library path

16 CONVERT MEDIA
Sometimes one simply need to convert a video, audio file or document to another format.

1 6.1 T e xt e n c o d i ng

Text encoding can get totally wrong, specially when the language requires special characters like
àäç. The command iconv can convert from one encoding to an other.
# iconv -f <from_encoding> -t <to_encoding> <input_file>
# iconv -f ISO8859-1 -t UTF-8 -o file.input > file_utf8
# iconv -l # List known coded character sets

Without the -f option, iconv will use the local char-set, which is usually fine if the document
displays well.

1 6.2 U n i x - D O S ne w line s

Convert DOS (CR/LF) to Unix (LF) newlines within a Unix shell. See also dos2unix and unix2dos
if you have them.
# sed 's/.$//' dosfile.txt > unixfile.txt

Convert Unix to DOS newlines within a Windows environment. Use sed from mingw or cygwin.
# sed -n p unixfile.txt > dosfile.txt

1 6.3 P D F t o J p e g a nd c o n c at e n a t e P D F f i l e s

Convert a PDF document with gs (GhostScript) to jpeg (or png) images for each page. Also much
shorter with convert (from ImageMagick or GraphicsMagick).
# gs -dBATCH -dNOPAUSE -sDEVICE=jpeg -r150 -dTextAlphaBits=4 -dGraphicsAlphaBits=4 \
-dMaxStripSize=8192 -sOutputFile=unixtoolbox_%d.jpg unixtoolbox.pdf
# convert unixtoolbox.pdf unixtoolbox-%03d.png
# convert *.jpeg images.pdf # Create a simple PDF with all pictures

45
 — Printing —
Ghostscript can also concatenate multiple pdf files into a single one. This only works well if the
PDF files are "well behaved".
# gs -q -sPAPERSIZE=a4 -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -sOutputFile=all.pdf \
file1.pdf file2.pdf ... # On Windows use '#' instead of '='

1 6.4 C on v e rt v id e o

Compress the Canon digicam video with an mpeg4 codec and repair the crappy sound.
# mencoder -o videoout.avi -oac mp3lame -ovc lavc -srate 11025 \
-channels 1 -af-adv force=1 -lameopts preset=medium -lavcopts \
vcodec=msmpeg4v2:vbitrate=600 -mc 0 vidoein.AVI

See sox for sound processing.

1 6.5 C opy a n a ud i o c d

The program cdparanoia19 can save the audio tracks (FreeBSD port in audio/cdparanoia/),
oggenc can encode in Ogg Vorbis format, lame converts to mp3.
# cdparanoia -B # Copy the tracks to wav files in current dir
# lame -b 256 in.wav out.mp3 # Encode in mp3 256 kb/s
# for i in *.wav; do lame -b 256 $i `basename $i .wav`.mp3; done
# oggenc in.wav -b 256 out.ogg # Encode in Ogg Vorbis 256 kb/s

17 PRINTING

1 7.1 P r i n t w i t h lp r

# lpr unixtoolbox.ps # Print on default printer

# export PRINTER=hp4600 # Change the default printer
# lpr -Php4500 #2 unixtoolbox.ps # Use printer hp4500 and print 2 copies
# lpr -o Duplex=DuplexNoTumble ... # Print duplex along the long side
# lpr -o PageSize=A4,Duplex=DuplexNoTumble ...
# lpq # Check the queue on default printer
# lpq -l -Php4500 # Queue on printer hp4500 with verbose
# lprm - # Remove all users jobs on default printer
# lprm -Php4500 3186 # Remove job 3186. Find job nbr with lpq
# lpc status # List all available printers
# lpc status hp4500 # Check if printer is online and queue length

Some devices are not postscript and will print garbage when fed with a pdf file. This might be
solved with:
# gs -dSAFER -dNOPAUSE -sDEVICE=deskjet -sOutputFile=\|lpr file.pdf

18 DATABASES

1 8.1 P os t g re S Q L

Change root or a username password

# psql -d template1 -U pgsql

> alter user pgsql with password 'pgsql_password'; # Use username instead of "pgsql"

19.http://xiph.org/paranoia/

46
 — Databases —
Create user and database

The commands createuser, dropuser, createdb and dropdb are convenient shortcuts
equivalent to the SQL commands. The new user is bob with database bobdb ; use as root with
pgsql the database super user:
# createuser -U pgsql -P bob # -P will ask for password
# createdb -U pgsql -O bob bobdb # new bobdb is owned by bob
# dropdb bobdb # Delete database bobdb
# dropuser bob # Delete user bob

The general database authentication mechanism is configured in pg_hba.conf

Grant remote access

The file $PGSQL_DATA_D/postgresql.conf specifies the address to bind to. Typically

listen_addresses = '*' for Postgres 8.x.
The file $PGSQL_DATA_D/pg_hba.conf defines the access control. Examples:
# TYPE DATABASE USER IP-ADDRESS IP-MASK METHOD
host bobdb bob 212.117.81.42 255.255.255.255 password
host all all 0.0.0.0/0 password

Backup and restore

The backups and restore are done with the user pgsql or postgres. Backup and restore a single
database:
# pg_dump --clean dbname > dbname_sql.dump
# psql dbname < dbname_sql.dump

Backup and restore all databases (including users):

# pg_dumpall --clean > full.dump
# psql -f full.dump postgres

In this case the restore is started with the database postgres which is better when reloading an
empty cluster.

1 8.2 My S Q L

Change mysql root or username password

Method 1
# /etc/init.d/mysql stop
or
# killall mysqld
# mysqld --skip-grant-tables
# mysqladmin -u root password 'newpasswd'
# /etc/init.d/mysql start

Method 2
# mysql -u root mysql
mysql> UPDATE USER SET PASSWORD=PASSWORD("newpassword") where user='root';
mysql> FLUSH PRIVILEGES; # Use username instead of "root"
mysql> quit

Create user and database

# mysql -u root mysql

mysql> CREATE DATABASE bobdb;
mysql> GRANT ALL ON *.* TO 'bob'@'%' IDENTIFIED BY 'pwd'; # Use localhost instead of %
# to restrict the network access
mysql> DROP DATABASE bobdb; # Delete database

47
 — Disk Quota —
mysql> DROP USER bob; # Delete user
mysql> DELETE FROM mysql.user WHERE user='bob and host='hostname'; # Alt. command
mysql> FLUSH PRIVILEGES;

Grant remote access

Remote access is typically permitted for a database, and not all databases. The file /etc/my.cnf
contains the IP address to bind to. Typically comment the line bind-address = out.
# mysql -u root mysql
mysql> GRANT ALL ON bobdb.* TO bob@'xxx.xxx.xxx.xxx' IDENTIFIED BY 'PASSWORD';
mysql> REVOKE GRANT OPTION ON foo.* FROM bar@'xxx.xxx.xxx.xxx';
mysql> FLUSH PRIVILEGES; # Use 'hostname' or also '%' for full access

Backup and restore

Backup and restore a single database:

# mysqldump -u root -psecret --add-drop-database dbname > dbname_sql.dump
# mysql -u root -psecret -D dbname < dbname_sql.dump

Backup and restore all databases:

# mysqldump -u root -psecret --add-drop-database --all-databases > full.dump
# mysql -u root -psecret < full.dump

Here is "secret" the mysql root password, there is no space after -p. When the -p option is used
alone (w/o password), the password is asked at the command prompt.

1 8.3 SQL i t e

SQLite20 is a small powerfull self-contined, serverless, zero-configuration SQL database.

Dump and restore

It can be useful to dump and restore an SQLite database. For example you can edit the dump file
to change a column attribute or type and then restore the database. This is easier than messing
with SQL commands. Use the command sqlite3 for a 3.x database.
# sqlite database.db .dump > dump.sql # dump
# sqlite database.db < dump.sql # restore

Convert 2.x to 3.x database

sqlite database_v2.db .dump | sqlite3 database_v3.db

19 DISK QUOTA
A disk quota allows to limit the amount of disk space and/or the number of files a user or (or
member of group) can use. The quotas are allocated on a per-file system basis and are enforced
by the kernel.

1 9.1 L i n u x s e t u p

The quota tools package usually needs to be installed, it contains the command line tools.
Activate the user quota in the fstab and remount the partition. If the partition is busy, either all
locked files must be closed, or the system must be rebooted. Add usrquota to the fstab mount
options, for example:

20.http://www.sqlite.org

48
 — Disk Quota —
/dev/sda2 /home reiserfs rw,acl,user_xattr,usrquota 1 1
# mount -o remount /home
# mount # Check if usrquota is active, otherwise reboot

Initialize the quota.user file with quotacheck.

# quotacheck -vum /home
# chmod 644 /home/aquota.user # To let the users check their own quota

Activate the quota either with the provided script (e.g. /etc/init.d/quotad on SuSE) or with
quotaon:
quotaon -vu /home

Check that the quota is active with:

quota -v

1 9.2 F r e e BS D s e t u p

The quota tools are part of the base system, however the kernel needs the option quota. If it is
not there, add it and recompile the kernel.
options QUOTA

As with Linux, add the quota to the fstab options (userquota, not usrquota):
/dev/ad0s1d /home ufs rw,noatime,userquota 2 2
# mount /home # To remount the partition

Enable disk quotas in /etc/rc.conf and start the quota.

# grep quotas /etc/rc.conf
enable_quotas="YES" # turn on quotas on startup (or NO).
check_quotas="YES" # Check quotas on startup (or NO).
# /etc/rc.d/quota start

1 9.3 A s s i gn q uo t a limit s

The quotas are not limited per default (set to 0). The limits are set with edquota for single users.
A quota can be also duplicated to many users. The file structure is different between the quota
implementations, but the principle is the same: the values of blocks and inodes can be limited.
Only change the values of soft and hard. If not specified, the blocks are 1k. The grace period is
set with edquota -t. For example:
# edquota -u colin

Linux

Disk quotas for user colin (uid 1007):

Filesystem blocks soft hard inodes soft hard
/dev/sda8 108 1000 2000 1 0 0

FreeBSD

Quotas for user colin:

/home: kbytes in use: 504184, limits (soft = 700000, hard = 800000)
inodes in use: 1792, limits (soft = 0, hard = 0)

For many users

The command edquota -p is used to duplicate a quota to other users. For example to duplicate a
reference quota to all users:

49
 — Shells —
# edquota -p refuser `awk -F: '$3 > 499 {print $1}' /etc/passwd`
# edquota -p refuser user1 user2 # Duplicate to 2 users

Checks

Users can check their quota by simply typing quota (the file quota.user must be readable). Root
can check all quotas.
# quota -u colin # Check quota for a user
# repquota /home # Full report for the partition for all users

20 SHELLS
Most Linux distributions use the bash shell while the BSDs use tcsh, the bourne shell is only used
for scripts. Filters are very useful and can be piped:
grep Pattern matching
sed Search and Replace strings or characters
cut Print specific columns from a marker
sort Sort alphabetically or numerically
uniq Remove duplicate lines from a file
For example used all at once:
# ifconfig | sed 's/ / /g' | cut -d" " -f1 | uniq | grep -E "[a-z0-9]+" | sort -r
# ifconfig | sed '/.*inet addr:/!d;s///;s/ .*//'|sort -t. -k1,1n -k2,2n -k3,3n -k4,4n

The first character in the sed pattern is a tab. To write a tab on the console, use ctrl-v ctrl-tab.

2 0.1 b a s h

Redirects and pipes for bash and sh:

# cmd 1> file # Redirect stdout to file.
# cmd 2> file # Redirect stderr to file.
# cmd 1>> file # Redirect and append stdout to file.
# cmd &> file # Redirect both stdout and stderr to file.
# cmd >file 2>&1 # Redirects stderr to stdout and then to file.
# cmd1 | cmd2 # pipe stdout to cmd2
# cmd1 2>&1 | cmd2 # pipe stdout and stderr to cmd2

Modify your configuration in ~/.bashrc (it can also be ~/.bash_profile). The following entries are
useful, reload with ". .bashrc".
# in .bashrc
bind '"\e[A"':history-search-backward # Use up and down arrow to search
bind '"\e[B"':history-search-forward # the history. Invaluable!
set -o emacs # Set emacs mode in bash (see below)
set bell-style visible # Do not beep, inverse colors
# Set a nice prompt like [user@host]/path/todir>
PS1="\[\033[1;30m\][\[\033[1;34m\]\u\[\033[1;30m\]"
PS1="$PS1@\[\033[0;33m\]\h\[\033[1;30m\]]\[\033[0;37m\]"
PS1="$PS1\w\[\033[1;30m\]>\[\033[0m\]"

# To check the currently active aliases, simply type alias

alias ls='ls -aF' # Append indicator (one of */=>@|)
alias ll='ls -aFls' # Listing
alias la='ls -all'
alias ..='cd ..'
alias ...='cd ../..'
export HISTFILESIZE=5000 # Larger history
export CLICOLOR=1 # Use colors (if possible)
export LSCOLORS=ExGxFxdxCxDxDxBxBxExEx

50
 — Scripting —
2 0.2 t c s h

Redirects and pipes for tcsh and csh (simple > and >> are the same as sh):
# cmd >& file # Redirect both stdout and stderr to file.
# cmd >>& file # Append both stdout and stderr to file.
# cmd1 | cmd2 # pipe stdout to cmd2
# cmd1 |& cmd2 # pipe stdout and stderr to cmd2

The settings for csh/tcsh are set in ~/.cshrc, reload with "source .cshrc". Examples:
# in .cshrc
alias ls 'ls -aF'
alias ll 'ls -aFls'
alias la 'ls -all'
alias .. 'cd ..'
alias ... 'cd ../..'
set prompt = "%B%n%b@%B%m%b%/> " # like user@host/path/todir>
set history = 5000
set savehist = ( 6000 merge )
set autolist # Report possible completions with tab
set visiblebell # Do not beep, inverse colors

# Bindkey and colors

bindkey -e Select Emacs bindings # Use emacs keys to edit the command prompt
bindkey -k up history-search-backward # Use up and down arrow to search
bindkey -k down history-search-forward
setenv CLICOLOR 1 # Use colors (if possible)
setenv LSCOLORS ExGxFxdxCxDxDxBxBxExEx

The emacs mode enables to use the emacs keys shortcuts to modify the command prompt line.
This is extremely useful (not only for emacs users). The most used commands are:
C-a Move cursor to beginning of line
C-e Move cursor to end of line
M-b Move cursor back one word
M-f Move cursor forward one word
M-d Cut the next word
C-w Cut the last word
C-u Cut everything before the cursor
C-k Cut everything after the cursor (rest of the line)
C-y Paste the last thing to be cut (simply paste)
C-_ Undo
Note: C- = hold control, M- = hold meta (which is usually the alt or escape key).

21 SCRIPTING
Basics (p51) | Script example (p52) | sed (p53) | Regular Expressions (p53) | useful commands
(p53)

The Bourne shell (/bin/sh) is present on all Unix installations and scripts written in this language
are (quite) portable; man 1 sh is a good reference.

2 1.1 Ba s i cs

Variables and arguments

Assign with variable=value and get content with $variable

MESSAGE="Hello World" # Assign a string
PI=3.1415 # Assign a decimal number
N=8
TWON=`expr $N * 2` # Arithmetic expression (only integers)
TWON=$(($N * 2)) # Other syntax

51
 — Scripting —
TWOPI=`echo "$PI * 2" | bc -l` # Use bc for floating point operations
ZERO=`echo "c($PI/4)-sqrt(2)/2" | bc -l`

The command line arguments are

$0, $1, $2, ... # $0 is the command itself
$# # The number of arguments
$* # All arguments (also $@)

Special Variables

$$ # The current process ID

$? # exit status of last command
command
if [ $? != 0 ]; then
echo "command failed"
fi
mypath=`pwd`
mypath=${mypath}/file.txt
echo ${mypath##*/} # Display the filename only
echo ${mypath%%.*} # Full path without extention
var2=${var:=string} # Use var if set, otherwise use string
# assign string to var and then to var2.

Constructs

for file in `ls`

do
echo $file
done

count=0
while [ $count -lt 5 ]; do
echo $count
sleep 1
count=$(($count + 1))
done

myfunction() {
find . -type f -name "*.$1" -print # $1 is first argument of the function
}
myfunction "txt"

Generate a file
MYHOME=/home/colin
cat > testhome.sh << _EOF
# All of this goes into the file testhome.sh
if [ -d "$MYHOME" ] ; then
echo $MYHOME exists
else
echo $MYHOME does not exist
fi
_EOF
sh testhome.sh

2 1.2 Bo u r n e s c ri p t e x a m p le

As a small example, the script used to create a PDF booklet from this xhtml document:

52
 — Scripting —
#!/bin/sh
# This script creates a book in pdf format ready to print on a duplex printer
if [ $# -ne 1 ]; then # Check the argument
echo 1>&2 "Usage: $0 HtmlFile"
exit 1 # non zero exit if error
fi

file=$1 # Assign the filename

fname=${file%.*} # Get the name of the file only
fext=${file#*.} # Get the extension of the file

prince $file -o $fname.pdf # from www.princexml.com

pdftops -paper A4 -noshrink $fname.pdf $fname.ps # create postscript booklet
cat $fname.ps |psbook|psnup -Pa4 -2 |pstops -b "2:0,1U(21cm,29.7cm)" > $fname.book.ps

ps2pdf13 -sPAPERSIZE=a4 -sAutoRotatePages=None $fname.book.ps $fname.book.pdf

# use #a4 and #None on Windows!
exit 0 # exit 0 means successful

2 1.3 Som e s e d c o m ma nd s

Here is the one liner gold mine21. And a good introduction and tutorial to sed22.
sed 's/string1/string2/g' # Replace string1 with string2
sed -i 's/wroong/wrong/g' *.txt # Replace a recurring word with g
sed 's/\(.*\)1/\12/g' # Modify anystring1 to anystring2
sed '/<p>/,/<\/p>/d' t.xhtml # Delete lines that start with <p>
# and end with </p>
sed '/ *#/d; /^ *$/d' # Remove comments and blank lines
sed 's/[ \t]*$//' # Remove trailing spaces (use tab as \t)
sed 's/^[ \t]*//;s/[ \t]*$//' # Remove leading and trailing spaces
sed 's/[^*]/[&]/' # Enclose first char with [] top->[t]op
sed = file | sed 'N;s/\n/\t/' > file.num # Number lines on a file

2 1.4 R e g u l a r E x p re s s io ns

Some basic regular expression useful for sed too. See Basic Regex Syntax23 for a good primer.
[\^$.|?*+() # special characters any other will match themselves
\ # escapes special characters and treat as literal
* # repeat the previous item zero or more times
. # single character except line break characters
.* # match zero or more characters
^ # match at the start of a line/string
$ # match at the end of a line/string
.$ # match a single character at the end of line/string
^ $ # match line with a single space
[^A-Z] # match any line beginning with any char from A to Z

2 1.5 Som e u s e f ul c o m ma nd s

The following commands are useful to include in a script or as one liners.

sort -t. -k1,1n -k2,2n -k3,3n -k4,4n # Sort IPv4 ip addresses
echo 'Test' | tr '[:lower:]' '[:upper:]' # Case conversion
echo foo.bar | cut -d . -f 1 # Returns foo
PID=$(ps | grep script.sh | grep bin | awk '{print $1}') # PID of a running script
PID=$(ps axww | grep [p]ing | awk '{print $1}') # PID of ping (w/o grep pid)
IP=$(ifconfig $INTERFACE | sed '/.*inet addr:/!d;s///;s/ .*//') # Linux

21.http://student.northpark.edu/pemente/sed/sed1line.txt
22.http://www.grymoire.com/Unix/Sed.html
23.http://www.regular-expressions.info/reference.html

53
 — Programming —
IP=$(ifconfig $INTERFACE | sed '/.*inet /!d;s///;s/ .*//') # FreeBSD
if [ `diff file1 file2 | wc -l` != 0 ]; then [...] fi # File changed?
cat /etc/master.passwd | grep -v root | grep -v \*: | awk -F":" \ # Create http passwd
'{ printf("%s:%s\n", $1, $2) }' > /usr/local/etc/apache2/passwd

testuser=$(cat /usr/local/etc/apache2/passwd | grep -v \ # Check user in passwd

root | grep -v \*: | awk -F":" '{ printf("%s\n", $1) }' | grep ^user$)
:(){ :|:& };: # bash fork bomb. Will kill your machine
tail +2 file > file2 # remove the first line from file

I use this little trick to change the file extension for many files at once. For example from .cxx to
.cpp. Test it first without the | sh at the end. You can also do this with the command rename if
installed. Or with bash builtins.
# ls *.cxx | awk -F. '{print "mv "$0" "$1".cpp"}' | sh
# ls *.c | sed "s/.*/cp & &.$(date "+%Y%m%d")/" | sh # e.g. copy *.c to *.c.20080401
# rename .cxx .cpp *.cxx # Rename all .cxx to cpp
# for i in *.cxx; do mv $i ${i%%.cxx}.cpp; done # with bash builtins

22 PROGRAMMING

2 2.1 C ba s i c s

strcpy(newstr,str) /* copy str to newstr */

expr1 ? expr2 : expr3 /* if (expr1) expr2 else expr3 */
x = (y > z) ? y : z; /* if (y > z) x = y; else x = z; */
int a[]={0,1,2}; /* Initialized array (or a[3]={0,1,2}; */
int a[2][3]={{1,2,3},{4,5,6}}; /* Array of array of ints */
int i = 12345; /* Convert in i to char str */
char str[10];
sprintf(str, "%d", i);

2 2.2 C e xa m p l e

A minimal c program simple.c:

#include <stdio.h>
main() {
int number=42;
printf("The answer is %i\n", number);
}

Compile with:
# gcc simple.c -o simple
# ./simple
The answer is 42

2 2.3 C ++ b a s i c s

*pointer // Object pointed to by pointer

&obj // Address of object obj
obj.x // Member x of class obj (object obj)
pobj->x // Member x of class pointed to by pobj
// (*pobj).x and pobj->x are the same

2 2.4 C ++ e x a mp le

As a slightly more realistic program in C++, let's create a class in its own header (IPv4.h) and
implementation (IPv4.cpp) and create a program which uses the class functionality. The class has

54
 — Programming —
a member to convert an IP address in integer format to the known quad format. This is a
minimal c++ program with a class and multi-source compile.

IPv4 class

IPv4.h:
#ifndef IPV4_H
#define IPV4_H
#include <string>

namespace GenericUtils { // create a namespace

class IPv4 { // class definition
public:
IPv4();
~IPv4();
std::string IPint_to_IPquad(unsigned long ip);// member interface
};
} //namespace GenericUtils
#endif // IPV4_H

IPv4.cpp:
#include "IPv4.h"
#include <string>
#include <sstream>
using namespace std; // use the namespaces
using namespace GenericUtils;

IPv4::IPv4() {} // default constructor/destructor

IPv4::~IPv4() {}
string IPv4::IPint_to_IPquad(unsigned long ip) { // member implementation
ostringstream ipstr; // use a stringstream
ipstr << ((ip &0xff000000) >> 24) // Bitwise right shift
<< "." << ((ip &0x00ff0000) >> 16)
<< "." << ((ip &0x0000ff00) >> 8)
<< "." << ((ip &0x000000ff));
return ipstr.str();
}

The program simplecpp.cpp

#include "IPv4.h"
#include <iostream>
#include <string>
using namespace std;

int main (int argc, char* argv[]) {

string ipstr; // define variables
unsigned long ipint = 1347861486; // The IP in integer form
GenericUtils::IPv4 iputils; // create an object of the class
ipstr = iputils.IPint_to_IPquad(ipint); // call the class member
cout << ipint << " = " << ipstr << endl; // print the result

return 0;
}

Compile and execute with:

# g++ -c IPv4.cpp simplecpp.cpp # Compile in objects
# g++ IPv4.o simplecpp.o -o simplecpp.exe # Link the objects to final executable
# ./simplecpp.exe
1347861486 = 80.86.187.238

Use ldd to check which libraries are used by the executable and where they are located. This
command is also used to check if a shared library is missing or if the executable is static.

55
 — Online Help —
# ldd /sbin/ifconfig

2 2.5 Si m p l e M a k e file

The corresponding minimal Makefile for the multi-source program is shown below. The lines with
instructions must begin with a tab! The back slash "\" can be used to cut long lines.
CC = g++
CFLAGS = -O
OBJS = IPv4.o simplecpp.o

simplecpp: ${OBJS}
${CC} -o simplecpp ${CFLAGS} ${OBJS}
clean:
rm -f ${TARGET} ${OBJS}

23 ONLINE HELP

2 3.1 D o cu m e n t a t io n

Linux Documentation en.tldp.org

Linux Man Pages www.linuxmanpages.com
Linux commands directory www.oreillynet.com/linux/cmd
Linux doc man howtos linux.die.net
FreeBSD Handbook www.freebsd.org/handbook
FreeBSD Man Pages www.freebsd.org/cgi/man.cgi
FreeBSD user wiki www.freebsdwiki.net
Solaris Man Pages docs.sun.com/app/docs/coll/40.10

2 3.2 Ot h e r Un ix / Linu x re f e r e n c es

Rosetta Stone for Unix bhami.com/rosetta.html (a Unix command translator)

Unix guide cross reference unixguide.net/unixguide.shtml
Linux commands line list www.linuxguide.it/commands_list.php
Short Linux reference www.pixelbeat.org/cmdline.html
Little command line goodies www.shell-fu.org

That's all folks!

This document: "Unix Toolbox revision 12" is licensed under a Creative Commons Licence
[Attribution - Share Alike]. © Colin Barschel 2007-2008. Some rights reserved.

56