Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
767 views

Technical Data - IP Protection Classification IEC 529

The document describes an international standard for classifying the protection levels of electrical equipment cases. The standard uses a two-digit coding system to indicate protection against intrusion of particles and penetration of liquids. The first digit refers to protection against external solids from 0 (no protection) to 6 (complete protection against dust). The second digit refers to protection against liquids from 0 (no protection) to 8 (indefinite immersion in water). The standard provides guidelines for classifying cases based on this two-digit coding system.

Uploaded by

sssf-doboj
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
767 views

Technical Data - IP Protection Classification IEC 529

The document describes an international standard for classifying the protection levels of electrical equipment cases. The standard uses a two-digit coding system to indicate protection against intrusion of particles and penetration of liquids. The first digit refers to protection against external solids from 0 (no protection) to 6 (complete protection against dust). The second digit refers to protection against liquids from 0 (no protection) to 8 (indefinite immersion in water). The standard provides guidelines for classifying cases based on this two-digit coding system.

Uploaded by

sssf-doboj
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IP PROTECTION CLASSIFICATION FOR CASES

According to International Standard IEC 529 (see note below)

1st digit

Protection against intrusion of external particle matter.

0
1
2
3
IP 4
5
6

No protection.

Protection against
ingress of large solid
foreign bodies,
larger than
50 mm (hands)
Protection against
ingress of medium
size solid foreign
bodies, larger than
12 mm (fingers)
Protection against
ingress of small solid
foreign bodies,
larger than 2.5 mm
(tools, wires).
Protection against
ingress of small solid
foreign bodies,
larger than 1 mm
(tools, wires).
Protection against
harmful deposits of dust,
which cannot enter in
an amount sufficient to
interfere with satisfactory
operation.

Complete protection
against ingress of dust.

As a specification for cases of rotary controls does


not exist, we refer to International Standard IEC 529
for protection classification of cases for electrical
machines, devices or materials.

2nd digit

Protection against penetration of liquids.

0
1
2
3
4
5
6
7
8

ELESA and GANTER models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.

No protection.

Protection against
drops of
condensed water
falling vertically.
Protection against
drops of liquid falling
at an angle equal
to or smaller than 15 with
respect to the vertical.
Protection against
drops of liquid falling
at an angle equal
to or smaller than 60
with respect to the vertical.

Protection against liquid


splashed from any
direction.

Protection against
water jets projected
by a nozzle from any
direction.

Protection against
water from heavy sea
on ships decks.

Protection against
immersion in water
under stated
conditions of
pressure and time.
Protection against
indefinite immersion
in water under stated
conditions of pressure.

7
503

Rotary controls

Symbol

You might also like