10 PDF

I N D E X
O F
ARCHITECTURAL
S H E E T S
ELECTRICAL
A1 - PERSPECTIVE VIEW, SUMMARY OF QUANTITIES

INDEX OF SHEETS, SITE DEVELOPMENT PLAN,
VICINITY MAP
A2 - GROUND FLOOR PLAN
SECOND TO FOURTH FLOOR PLAN
A3 - ROOF PLAN, REAR ELEVATION, FRONT ELEVATION
A4 - SCHEDULE OF DOORS & WINDOWS,
CROSS-SECTION
A5 - RIGHT SIDE ELEVATION, LEFT SIDE ELEVATION
A6 - LONGITUDINAL SECTION, BLOW UP PLAN AT
STAGE FRONT ELEVATION AT STAGE, SECTION
A7 - ICONIC DESIGN ELEVATION, CURB PRATT TRUSS
DETAIL, HAND RAIL DETAIL, BLOW UP DETAIL,
TAPERED COLUMN DETAIL
A8 - BLOW UP PLAN AT STAIRS, NOSING DETAIL, CRASH
DETAIL, STAIR DETAIL
A9 - CR DETAIL AT GROUND FLOOR (PWD),
CR DETAIL AT GROUND FLOOR (SHE),
CR DETAIL AT GROUND FLOOR (HE),
SECTION A-A, SECTION B-B, SECTION C-C, SECTION
D-D,SECTION E-E, SECTION F-F
A10 - BLOW UP DETAILS
A11 - BLOW UP PLANS OF STAIRS @ GROUND FLOOR,
SECOND TO FOURTH FLOOR, (FIRE EXIT), DETAIL
SECTION OF STAIRS, SPOT DETAIL (CRASH RAILING)
SPOT DETAIL 'A-A' SPOT DETAIL 'B-B', HANDRAIL
DETAIL, CROSS SECTION
E1 - GENERAL NOTES, RISER DIAGRAM, SCHEDULE OF PANELBOARD

E2 - GROUND FLOOR & TYPICAL 2ND TO 4TH FLOOR LIGHTING LAYOUT
E3 - GROUND FLOOR & TYPICAL 2ND TO 4TH FLOOR POWER LAYOUT
PLUMBING
P1 - GROUND FLOOR & TYPICAL 2ND TO 4TH FLOOR
SEWER LINE LAYOUT
WATER LINE LAYOUT
STORM DRAINAGE LAYOUT
P4 - GENERAL NOTES, LEGENDS,CATCH BASIN DETAILS,
AND SEPTIC TANK DETAILS
SUMMARY OF QUANTITIES
STRUCTURAL
A
A 1
SCALE:
S1 - GENERAL CONSTRUCTION NOTES

S2 - STRUCTURAL SPECIFICATION
S3 - FOUNDATION PLAN, MAT FOOTING, SECOND FLOOR
FRAMING PLAN
S4 - THIRD FLOOR FRAMING PLAN, FOURTH FLOOR
FRAMING PLAN
S5 - ROOF FRAMING PLAN, ROOF BEAM FRAMING PLAN
S6 - SCHEDULE OF SLAB, TYPICAL SLAB ELEVATION,
TRANSVERSE BEAM, REINFORCEMENT DETAIL,
TYPICAL ARRANGEMENT OF LONGITUDINAL
REINFORCEMENT, STAIR DETAILS,
S7 - ELEVATION OF COLUMN, SECTION - 1, SCHEDULE OF
BEAMS, TYPICAL TRUSS ANCHORAGE DETAIL, MAT
FOOTING SECTION DETAIL, SCHEDULE OF COLUMNS
S8 - SPOT DETAIL OF PARAPPET AND TRUSS DETAIL,
SCHEDULE OF SLAB REINFORCEMENT, C2F1 DETAIL,
CONCRETE SUNBREAKER DETAIL, DETAIL OF T - 1,
DETAL OF T - 2, DETAIL OF T - 3
S9 - DETAIL OF LT - 1, DETAIL HT - 1 TO HT - 5, DETAIL
G 1 - 3, PARAPPET AND TRUSS DETAIL
S10 - DETAIL / ELEVATION OF RAMP, PLAN OF RAMP,
SPOT DETAIL 'A - A' SPOT DETAIL 'B - B'
NOT TO SCALE
E . JACIN
SITE
TO
VE.
SHOE A
FLOREN
LEGEND :
Z
CIO PA
CONSTRUCTION OF (4) FOUR STOREY (20)

TWENTY CLASSROOM SCHOOL BUILDING
STA. ELENA HIGH SCHOOL, MARIKINA CITY
EXISTING BUILDING
CONCURRED BY:
V I C I N I T Y
REPUBLIC OF THE PHILIPPINES
NATIONAL CAPITAL REGION
FIRST METRO MANILA ENGINEERING DISTRICT

WEST BANK ROAD, MANGGAHAN FLOODWAY
ROSARIO, PASIG CITY
SITE DEVELOPMENT PLAN
M A P
PROJECT/LOCATION:
CONSTRUCTION OF (4) FOUR STOREY

(20) TWENTY CLASSROOM SCHOOL
BUILDING STA. ELENA HIGH SCHOOL,
MARIKINA CITY
DANILO M. MARCIAL
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SPECIAL PROJECT ENGINEER

PAGCOR
SUBMITTED BY:
RECOMMENDING APPROVAL:
APPROVED BY:
SET NO.:
SHEET NO.:
JERWIN ANDES
DATA ENCODER I
PERSPECTIVE VIEW, INDEX OF SHEETS,

SUMMARY OF QUANTITIES, SITE
DEVELOPMENT PLAN, VICINITY MAP
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-1
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS
REYNALDO G. TAGUDANDO
OIC - CHIEF PLANNING AND DESIGN SECTION

ENGINEER III
OIC - ASSISTANT DISTRICT ENGINEER
DISTRICT ENGINEER
REGIONAL DIRECTOR
1 28
C
A 10
A
A 10
BLOW UP DET.
B
A 10
BLOW UP DET.
BLOW UP DET.
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
BLOW UP DETAILS
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A - 10
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
10 28
B
A 11
A
A 11
C
A 11
- -
LANDING (F.F.L.)
UP
LANDING
FF1
B
A 11
5
4
3
2
1
CORRIDOR
FOURTH FLOOR
CORRIDOR
FOURTH FLOOR LVL.
CLASSROOMS
UP
LANDING
DETAIL SECTION OF STAIRS
B
A 11
A
A 11
SCALE:
1:20m
BLOW UP PLAN OF STAIRS @ GROUND FLOOR (FIRE EXIT)

SCALE:
THIRD FLOOR
CORRIDOR
1:75m
THIRD FLOOR LVL
D
A 11
LANDING
SECOND FLOOR
CORRIDOR
SECOND FLOOR LVL
A 11
UP
- -
FF1
H
A 11
LANDING
DN
K
CORRIDOR
H
A 11
CLASSROOMS
CRASH RAILING DETAIL

SCALE:
GROUND FLOOR
CORRIDOR
1:20m
FINISH GROUND LVL
NATURAL GROUND LVL
I
A 11
BLOW UP PLAN OF STAIRS @ 2ND FLOOR TO 4TH FLOOR (FIRE EXIT)

SCALE:
1:75m
C
A 11
G
A 11
SPOT DETAIL (CRASH RAILING)

SCALE:
1:5m


ROSARIO, PASIG CITY
F
A 11
SPOT DETAIL 'B - B'

SCALE:
1:5m
PROJECT/LOCATION:

MARIKINA CITY
E
A 11
SPOT DETAIL 'A - A'

SCALE:
SHEET CONTENT:
BLOW UP PLAN OF STAIRS GROUND
FLOOR, 2ND TO 4TH FLOOR ( FIRE EXIT ),
DETAIL SECTION OF STAIRS, SPOT DETAIL (
CRASH RAILING ), SPOT DETAIL A - A, B- B,
HANDRAIL DETAIL, CROSS SECTION
D
A 11
1:20m
S E C T I O N
SCALE:
SCALE:
1:20m
CONCURRED BY:
HANDRAIL DETAIL
DANILO M. MARCIAL
1:20m

PAGCOR
CHECKED BY:
DRAWN BY:
C R O S S
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A - 11
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
11 28
GENERAL CONSTRUCTION NOTES

TYPICAL BAR BENDING AND CUTTING DETAILS FOR SLABS
1. GENERAL NOTES AND TYPICAL STRUCTURAL DETAILS SHALL BE APPLIED TO ALL DRAWINGS
UNLESS OTHERWISE SHOWN OR NOTED
IF SLABS ARE REINFORCED BOTHWAYS BARS ALONG THE SHORTER SPAN SHALL BE
PLACED BELOW THOSE ALONG THE LONG SPAN AT THE CENTER AND OVER THE LONGER
SPAN FOR REINFORCING BARS NEAR THE SUPPORTS, THE SPACING OF THE BARS AT THE
2. FOR SIMILAR CONDITIONS MODIFY TYPICAL DETAILS AS REQUIRED TO MEET SPECIAL

CONDITIONS.
COLUMN STRIPS SHALL BE APPROXIMATELY ONE AND A HALF (1 1/2) SLAB THICKNESS
OR 45 CENTIMETERS.
TENSION AND SHALL NOT BE LESS THAN 0.0025 BT. ( SEE SCHEDULE BELOW )
5. ALL MATERIAL AND WORKSMASHIP SHALL CONFORM WITH THE LATEST APPLICABLE STANDARDS
OR SPECIFICATIONS ALL WORKS SHALL CONFORM WITH THE BEST PRACTICE PREVAILING IN THE
VARIOUS TRADES.
BEAMS---------------------------------------------------------------------------14 DAYS
6. INSPECTION - ALL WORKSMANSHIP AND CONSTRUCTIONS SHALL BE SUBJECT TO INSPECTION

EXAMINATION AND TESTING BY ENGINEER / ARCHITECT. THE ENGINEER / ARCHITECT SHALL HAVE
THE RIGHT TO REJECT DEFECTIVE MATERIALS AND WORKSMANSHIP OR REQUIRE ITS
CORRECTIONS.
8. THE CONTRACTOR SHALL SUBMIT THE SCHEDULE OF POURING AND THE

LOCATION OF THE CONSTRUCTION JOINTS TO THE STRUCTURAL ENGINEER
AT LEAST (4) DAYS PRIOR TO THE POURING FOR APPROVAL.
COLUMNS-----------------------------------------------------------------------21 DAYS
100 mm
100 mm
300mm EACH WAY
125 mm
100 mm
250mm EACH WAY
150 mm
100 mm
200mm EACH WAY
175 mm
100 mm
175mm EACH WAY
200 mm
100 mm
150mm EACH WAY
5.
9. THE CONTRACTOR SHALL FURNISH AND MAINTAIN ADEQUATE FORMS

SHORINGS UNTIL THE CONCRETE MEMBERS HAVE ATTAINED THEIR
WORKING CONDITION AND STRENGTH.
UNLESS OTHERWISE NOTED IN THE PLANS ALL BEDDED SLABS SHALL BE REINFORCED
WITH 10mm O AT 250mm O.C EACH WAY TO CENTER OF SLAB AND. CONSTRUCTION
JOINTS FOR SAME SHALL NOT BE LESS THAN 3.65 METER APART.
6.
EXTERIOR
COLUMN
SUPPORT
PROVIDE EXTRA REINFORCEMENTS FOR CORNER SLAB (TWO ADJACENT
7.
NOTES OF FOOTINGS.
CONCRETE SLAB REINFORCEMENTS SHALL BE PROPERLY SUPPORTED WITH 10mm O

STEEL CHAIR OR APPROVED EQUIVALENT SPACED AT 1.0 METER ON CENTER
BOTHWAYS.
1. FOOTINGARE DESIGNER FOR AN ALLOWABLE SOIL BEARING PRESSURE

OF 95.708 Kpa ( 2000 psf ). CONTRACTOR SHALL REPORT TO THE
ENGINEER, IN WRITING, SOIL CONDITIONS, UNCOVERED AND CONFIRM
ACTUAL BEARING CAPACITY OF SOIL BEFORE DEPOSITING CONCRETE.
DOWN INTO EDGE BEAM EXTENDED 412 @ 1800 LONG TOP BARS BEND BARS
MIN. OF 1,200 (4' - 0") INTO BARS.
2. FOOTING SHALL REST AT LEAST 1500mm BELOW NATURAL GRADE LINE

UNLESS OTHERWISE INDICATE IN PLANS. NO. OF FOOTING SHALL REST N
FILL.
3. MINIMUM CNCRETE PROTECTION FOR REINFORCEMENTS SHALL BE
75mm CLEAR DEPOSITED AGAINST A FORMWORK.
1- 12 TOP
& BOTT. &
BARS
4- 12
BOTT. BARS
SHALL BE:
TYPICAL CORNER SLAB DETAIL
B. COLUMNS AND SHEAR WALLS---------------------------------fy = 414 Mpa ( 60,000 psi )
(27.6 Mpa)
20mm
100mm
300
300
12 mm
300
300
300
16 mm
300
400
300
20 mm
400
550
4000 PSI
(27.6 Mpa)
20mm
100mm
SLAB ON GRADE
4000 PSI
(27.6 Mpa)
20mm
100m
MAINTAIN MINIMUM CONCRETE COVER FOR REINFORCING STEEL AS FOLLOWS.
2.
ALL REINFORCING BARS SIZE 10mm OR BIGGER SHALL BE DEFORMD IN
NOTES ON COLUMNS
1.
ACCORDANCE W/ ASTM A 706, BARS.

3.
SPLICES SHALL BE SECURELY WIRED TOGETHER & SHALL LAP OR EXTEND IN
SUSPENDED SLABS--------------------------------------------------------------20mm
ACCORDANCE W/ TABLE A & TABLE B ( TABLE OF LAP SPLICE & ANCHORAGE
SLAB ON GRADE-----------------------------------------------------------------40mm
LENGTH ) UNLESS OTHERWISE SHOWN ON DRAWINGS, SPLICES SHALL BE

STAGGERED WHENEVER POSSIBLE.
WALLS ABOVE GRADE----------------------------------------------------------25mm
NOTES ON CONCRETE SLABS

1.
EARTH BUT POURED AGAINST FORMS-------------------------------------50mm
ALL SLAB REINFORCEMENTS SHALL BE 20mm CLEAR MINIMUM FROM

BOTTOM AND FROM THE TOP
OF SLAB.
UNLESS OTHERWISE DETAILED IN CONTINOUS SLAB HAVING SAME
REINFORCEMENT RUNNING IN
ONE DIRECTION, REINFORCING BRS SHALL
BE BENT UP, OR CUT AS FOLLOWS.
2.
WHERE CONCRETE IS DEPOSITED.
2.
COLUMN TIES SHALL BE PROTECTED EVERYWHERE BY

A COVERING OF CONCRETE CAST MONOLITHICALLY
WITH THE CORE WITH THE MINIMUM SIZE OF COARSE
AGGREGATES IN MILLIMETERS.
3.
WHERE COLUMN CHANGE IN SIZE, VERTICAL

REINFORCEMENTS SHALL BE OFFSETAT A SLOPE OF
NOT MORE THAN 1 IN 6 AND EXTRA 10mm AT 100mm
SHALL BE PROVIDED THRU OUT THE OFFSET REGION.
DIRECTLY AGAINST EARTH----------------------------------------------------75mm

3. CONCRETE SHALL BE DEPOSITED IN ITS FINAL POSITION WITHOUT SEGRATION,
RE-HANDLING OR FLOWING PLACING SHALL BE DONE PREFERABLY WITH BUGGIES,
BUCKETS OR WHEELBARROWS, NO CHUTES WILL BE ALLOWED EXEPT TO TRANSFER
CONCRETE FROM HOPPERS TO BUGGIES, WHEEL BARROWS OR BUCKETS IN WHICH
CASE THEY SHALL NOT EXCEED SIX (6) METERS IN AGGREGATE LEGTH.
L 1/3
L 2/4
L 3/4
L 3/3
L 2/3
L 1/3
4.
0.20 MIN.
4. NO DEPOSITING OF CONCRETE SHALL BE ALLOWED WITHOUT THE USE OF

VIBRATORS UNLESS AUTHORIZE IN WRITING BY THE DESIGNER AND ONLY FOR
UNUSUAL CONDITIONS WHERE VIBRATIONS IS EXTREMELY DIFFICULT TO ACCOMPLISH.
5. ALL ANCHOR BOLTS, DOWELS, AND OTHER INSERTS, SHALL BE PRPERLY POSITIONED
& SECURED IN PLACE PRIOR TO PLACING OF CONCRETE.
L 1/4
L 1/3
L 1/3
L1
L 1/3
0.15 MIN.
L 1/3
L 1/3
L 1/3
L2
0.15 MIN.
L 1/3
L 1/3
L3
PROVIDE EXTRA SET OF TIES AT 100mm O.C FOR TIED

COLUMN REINFORCEMENT ABOVE AND BELOW
BEAM- COLUMN CONNECTIONS FOR A DISTANCE FROM
FACE OF CONNECTION EQUAL TO GREATER OF THE
OVERALL THICKNESS OF COLUMN, 1/6 THE CLEAR
HEIGHT OF COLUMN OR 450mm.
BEAM STRIRRUPS & COLUMN TIES-----------------------------------------40mm

WHERE CONCRETE IS EXPOSE TO
EDGE BARS
2 BARS
L 1/3
UNLESS OTHERWISE INDICATED IN THE PLANS, LAP

SPLICES FOR COLUMN REINFORCEMENT SHALL BE
MADE WITH THE CENTER HALF OF COLUMN HEIGHT.
AND THE SPLICE LENGTH SHALL NOT BE LESS THAN 40
BAR DIAMETERS. WELDING OR APPROVED
MECHANICAL DEVICES MAY BE USED PROVIDED THAT
NOT MORE THAN ALTERNATE BARS ARE WELDED OR
MECHANICALLY SPLICED AT ANY LEVEL AND THE
VERTICAL DISTANCES BETWEEN THESE WELDS OR
SPLICES OF ADJACENT BARS IS NOT LESS THAN 600mm.
L4
6. ALL CONCRETE SHALL BE KEPT MOIST FOR A MINIMM OF SEVEN CONSECUTIVE

DAYS IMMEDIATELY AFTER POURING BY THE USE OF WET BURLAP FOG SPRAYING,
CURING COMPOUNDS OR OTHER APPROVED METHODS.


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
BAR SIZE
(DEFORMED)
fe'= 20.7 MPa,(3000psi)

EMBEDMENT
LAPPED
EMBEDMENT
LAPPED
10 mm
225
300
200
300
300
12 mm
275
300
250
300
400
16 mm
350
400
325
400
350
500
20 mm
450
500
475
500
600
800
550
750
25 mm
550
625
550
625
28 mm
750
1000
650
850
28 mm
625
675
625
675
32 mm
950
850
850
850
32 mm
700
775
700
775
IF THE BEAM REINFORCING BARS END IN

A WAL, TH CLEAR DISTANCE FROM THE
BAR TO THE FARTHER FACE OF THE
WALL NOT BE LESS THAN 25mm.
EMBEDMENT LENGHT SHALL BE AS
SHOWN IN A TABLE "A" FOR TENSION
BARS AND TABLE "B" FOR
COMPRESSION BARS WITH A DISTANCE
TWICE THE MEMBER DEPTH FROM THE
FACE OF THE COLUMN. AT LEAST TWO
STRRUPS SHALL BE PROIVIDED AT ALL
SPLICES.
4.
WEB BARS
SEE
NOTE
SEE NOTE
SEE NOTE
SEPARATOR
NOTE 1
20mm CLEAR FOR JOIST

40mm CLEAR FOR BEAMS
AND GIRDERS
FIG. B-2
IF THERE ARE TWO OR MORE LAYERS

BAR SEPARATORS SPACED AT 1.0M ON
CENTER, IN NO CASE SHALL THERE BE
LESS THANTWO (2) SEPARATORS
BETWEEN TWO LAYERS OF BARS.
5.
MINIMUM CONCRETE PROTECTION FOR
JOINT HOOP SPACE @ "25" WHEN

THERE ARE BEAMS HAVING WIDTH OF
AT LEAST ONE HALF THE COLUMN
WIDTH & DEPTHS NOT LESS THAN
THREE QUARTERS OF THE DEEPEST
BEAM THAT FRAME INTO FOUR SIDES
OF THE COLUMN. ALL OTHER
CONDITIONS USE HOOPS @ "5"
CENTERS.
SEPARATORS BETWEEN TWO

LAYERS OF BARS.
TYP. DET. SLEEVES THRU. CONCRETE BEAM

FIG. B-3
6.
LAP SPLICE LENGTH:

AT ANY LEVEL NO MORE THAN
ALTERNATE BARS SHOULD BE
SPLICED. MIN. DISTANCE BET. TWO
ADJACENT BARS SPLICES SHALL BE
600mm
L/4
TOP BARS @ SUPPORT (CONT.)
REQ.D BOTT. BARS @ SUPPORT
20
TYP. DETAIL OF COL. LAP SPLICE &

EXT. GIRDER TO COOL. CONNECT.
SPLICE
SLEEVES FOR
UTILITY PIPES
MAX. 1/5 D
EXTRA STIRR. EACH

SIDE OF SLEEVES
7.
TYPICAL COLUMN
ELEV. SHOWING
DOWELS AND
TIES SPACING.
fe'=27.6 MPa,(4000psi)
25 mm
BEAMS, SLABS
(27.6 Mpa)
D. NON- LOAD BEARING WALL PARTITIONS, BEDDED SLABS, FLOOR & ROOF SLABS,
PARAPETS, CATCH BASIN, SIDE WALK----------------------fy = 227.5 Mpa ( 33,000 psi )
IN
4000 PSI
fe'=27.6 MPa,(4000psi)
CROSS TIE
dM
10
COLUMNS
2.
20mm
100mm
fe'= 20.7 MPa,(3000psi)
300
WITHIN CENTER
4000 PSI
D JOINT REINF.
D
PER
CONF.
REINF.
CONF.
SCHEDULE REINF.
SUSPENDED SLABS
C. BEAMS AND GIRDER--------------------------------------------fy = 414 Mpa ( 60,000 psi )
EMBEDMENT LENGTHS AND LAPPED

SPLICED IN MILLIMETERS
300
TYPICAL SLAB OPENING DET.
ALL OTHER INCLUDING
EMBEDMENT LENGTHS AND LAPPED

SPLICED IN MILLIMETERS
JOINT REINF.
AGGREGATE
EXTERIOR
COLUMN
SUPPORT
TABLE "B"
10 mm
OMIT TRIMMER BARS WHERE

OPENING IS FRAMED BY BEAM
A. FOOTINGS, FOOTING BEAMS AND GIRDERS-----------------fy = 414 Mpa ( 60,000 psi )
350mm. MAX
MAX. SLUMP
COLUMN TIES AS
MAX. SIZE OF
15 MIN.
TENSION BARS
LAPPED
38 mm
CLEAR
JOINT REINF.
D
D
CONF. REINF.
CONF.
REINF.
28 DAYS STRENGTH
60
LOCATION
15 MIN. ( WHEN COUNTED

FOR COMPRESSIION
EXTEND 20 DIA. BEYOND
DEPOSIT FACE SUPPORT
TABLE "A"
EMBEDMENT
IN TWO WAY SLAB EXTENDED

BARS UP TO BEAM SUPPORT
1. UNLESS OTHERWISE NOTED IN PLANS, THE YIELD STRENGTH OF REINFORCING BARS
L1/5
INTERIOR
COLUMN
SUPPORT
LAPPED
400
NOTES ON REINFORCEMENT
L1/3
SEE TABLE "A" FOR

LENGTH OF LAPPED
SPLICE
EMBEDMENT
3.
SLAB
OPENING
L1/4
TENSION BARS
BAR SIZE
(DEFORMED)
12 X 1000 LONG
AT MID- DEPTH
OF SLAB AT EACH
CORNER
L2
L1/4
INTERIOR
COLUMN
SUPPORT
DISCONTINUOUS EDGES) AS SHOWN BELOW.
END OF TWENTY EIGHT (28) DAYS W/ CORRESPONDING MAXIMUM SIZE AGGREGATE &
SLUMPS AS FOLLOWS.
L2
L1/3
SEE TABLE "A" FOR

LENGTH OF EMBEDMENT
NOTES ON CONCRETE MIXES & PLACING

1. WELDS SHALL ALL CONCRETE SHALL DEVELOP A MIN. COMPRESSIVE STREGTH AT THE
L1
L1/3
HALF OF "H"
11. THE CONTRACTOR IS GIVEN THE OPTION TO UTILZE ALTERNATIVE METHODS OF DESIGN AND
ALTERNATIVE METHOD OF CONSTRUCTION AS DEEMED SUITABLE PROVIDED THAT SUCH OPTION
IS IN CONFORMANCE TI THE DESIGN CONCEPT OF THE PROJECT AND IN ACCOMPLIANCE WITH THE
INFORMATION GIVEN IN THE CONTRACT DOCUMENTS
WALLS----------------------------------------------------------------------------21 DAYS
SEE TABLE "A"

FOR LENGTH OF
EMBEDMENT
MINIMUM TEMPERATURE BARS
60
0
10. SPECIAL NOTE: DIMENSIONS INDICATED ON THE STRUCTURAL DRAWINGS SHALL BE

COORDINATED WITH THE ARCHITECTURAL DRAWINGS. ARCHITECTURAL DRAWINGS SHALL BE
USED TO DEFINE DETAIL CONFIGURATIONS, ELEVATIONS, OPENINGS, JOINTS, SLOPES ETC.
THICKNESS
60
0
9. DO NOT SCALE DRAWINGS, CALLED OUT DIMENSIONS AND STANDARD CODE REQUIREMENTS
SHALL GOVERN OVER UNSCALED DRAWINGS.
20 BAR DIA.
LAPPED SPLICE ON
COMPRESSION BARS
SCHEDULE OF MINIMUM SLAB REINFORCEMENT
ADDITIONAL LOADS ARE IIMPOSED--------------------------------------8DAYS
SHOWN
t OR 1/4 D
FOUNDATION-------------------------------------------------------------------24hrs.
4. IT SHALL BE THE CONTRACTORS RESPONSIBILITY TO PROVIDE ADEQUATE SHORING AND

BRACING OF THE STRUCTURE FOR ALL LOADS THAT MAY BE IMPOSED DURING THE
CONSTRUCTION.
8. THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE COORDINATION OF WORK AMING THE
VARIOUS TRADES AS NECESSARY TO AVOID CONFLICTS AND TO INSURE THE INSTALLATION OF
ALL WORKS WITHIN THE AVAILABLE SPACE.
TYPICAL BARS BENDING AND CUTTING DETAILS FOR BEAMS SHALL BE AS

IN FIG. B-1.
TEMPERATURE BARS FOR SLABS SHALL BE GENERALY PLACED NEAR THE FACE IN
SUSPENDED SLAB EXEPT WHEN
7. UNLESS SPECIFICALLY DETAILED ELSEWHERE SHALL FOLLOW TYPICAL DETAILS AS SHOWN IN

THIS DRAWINGS.
2.
ht
4.
UNLESS, OTHERWISE NOTED IN PLANS, CAMBER ALL BEAMS AND GIRDER ATLEAST
6mm.S, FOR EVERY 4.50M SPAN , EXEPT CANTILEVERS FOR WHICH THE
CAMBER SHALL BE AS NOTED IN PLANS OR AS ORDERED BY THE ENGINEER BUT IN
NO CASE LESS THAN 20mm FOR EVERY 3.0M OF FREE SPAN.
400
3. THE CONTRACTOR SHALL EXAMINE THE DRAWING AND SHALL NOTIFY THE ENGINEER /
ARCHITECTS OF ANY DESCRIPANCIES HE MAY FIND BEFORE PROCEEDING WITH THE WORK OR
DURING THE CONSTRUCTION
7. STRIPPING OF FORMS AND SHORES:
1.
3.
NOTES ON BEAMS AND GIRDERS
GENERAL NOTES
WHEN A BEAM CROSSES A

GIRDER, REST BEAM ON TOP OF
GIRDER BARS, BEAM
REINFORCING BAR SHALL BE
SYMMETRICAL ABOUT CENTER
LINE WHENEVER POSSIBLE.
GENERALLY NO SPLICES SHALL BE
PERMITTED AT POINTS WHERE
CRITICAL BENDING STRESSES
OCCUR, SPLICES WHERE SO
PERMITTED SHALL BE INDICATED
IN THE TABLE "S" "B" WELDED
SPLICES SHALL DEVELOP IN A
TENSION AT LEAST 125% OF
SPECIFIED YIELD STRENGTH OF
THE BAR, NOT MORE THAN 50%
OF THE BARS AT ANY ONE
SECTION IS ALLOWED TO BE
SPLICED THEREIN.
"THE CONSULTANT, ENGR. ROMEO D. ROBLES , SHALL BE HELD FULLY RESPONSIBLE FOR
FAILURE OF THE FACILITY DUE TO FAULTY DESIGN EXCEPT FOR THE CHANGES MADE
WITHOUT THE CONFORMITY OF THE CONSULTANTS."
ENGR. ROMEO D. ROBLES msce, m.asep

STRUCTURAL ENGINEER
SHEET CONTENT:
CHECKED BY:
PREPARED BY:
DRAWN BY:
GENERAL CONSTRUCTION
NOTES
DESIGNED BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S-1
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
12 28
STRUCTURAL SPECIFICATIONS
B. PROVIDE RIGHT ANGLED REINFORCEMENT

AT CORNERS 0.92M LONG
125 mm
10 mm
@ 600mm O.C.
10 mm
@ 600mm O.C.
150 mm
10 mm
@ 600mm O.C.
10 mm
@ 600mm O.C.
200 mm
12 mm
@ 600mm O.C.
12 mm
@ 600mm O.C.
C. WHERE CHB OR CER. BLK. WALL DOWELS

JOIN COL. R.C. BEAMS AND WALL DOWELS
WITH THE SAME SIZE AS VERT. OR HOR.
REINFORCEMENTS SHALL BE PROVIDED.
HORIZONTAL BARS
125 mm
10 mm
@ 200mm O.C.
10 mm
@ 250mm O.C.
AT CENTERS VERTICAL
150 mm
12 mm
@ 250mm O.C.
12 mm
@ 300mm O.C. BARS STAGGERED OUT
VERT.
BARS
MAIN REINFORCEMENT TO BE
CONTINUOUS
30 BAR DIA
HOR.
BARS
2.
CARRY VERTICAL BARS AT LEAST 50mm ABOVE FLOOR LEVEL TO PROVIDE FOR SPLICES
WHEN NECESSARY STOP AT 50mm BELOW TOP SLAB OR SOLID BAND WHERE THE WALL
ENDS VERTICAL AND HORIZONTAL BARS SHALL BE SPLICED BY LAPPING A DISTANCE
EQUAL TO 30 DIAMETERS AND WIRED SECURELY WITH 16 G.I. WIRE PROVIDED THAT
SPLICES IN ADJACENT BARS ARE STAGGERED AT LEAST 1.50M.O.C.
3.
UNLESS OTHERWISE NOTED IN THE PLANS, ALL OPENINGS IN WALLS 250mm OR

THICKER SHALL BE REINFORCED AROUND WITH 2-20mm BARS FOR 225mm, 200mm,
175mm, 150mm, USE 2-16mm . FOR 125mm AND 100mm WALLS, USE 2-12mm BARS.
ALL WALLS SPANNING SHALL HAVE VERTICAL REINFORCEMENT BENT TO A U-FORM LIKE
STIRRUPS AND SPACED ACCORDING TO THE SCHEDULE UNLESS OTHERWISE NOTE (SEE
FIG.1).
SEE CONSTRUCTION NOTES FOR

MASONRY WALL REINFORCEMENTS
(TYPICAL)
VARIES
FIN. FLR. LVL.
DOWEL BARS TO MATCH CHB

VERT. BARS
6mm @ 200 mm
6mm @ 200 mm
6mm @ 200 mm
17.0
250
250
250
1- 12
1- 12
1- 16
1- 10
1- 10
1- 12
6mm @ 200 mm
6mm @ 200 mm
10mm @ 200 mm
300
300
300
1- 16
1- 16
1- 20
1- 12
1- 12
1- 12
10mm @ 200 mm
10mm @ 200 mm
10mm @ 200 mm
400

VERT. BARS
300
(TYP.)
FIN. FLR. LVL.
12 THK. EXPANSION JOINT WITH

MASTIC FILLER
1-
BEAM
TYPICAL SLAB & BEAM

CONSTRUCTION JOINT DET.
NOTE:
DOOR
OPENING

VERT. BARS
NOTES ON WELDS
WHERE DEPRESSED SLAB

OCCURS
400
(TYP.)
DOWEL BARS TO MATCH

CHB HOR. BARS
2.
REINFORCEMENT PARTIALLY EMBEDDED IN CONCRETE SHALL NOT BE FILLED BENT,

EXCEPT AS SHOWN IN THE DESIGN DRAWINGS OR PERMITTED BY THE STRUCTURAL
ENGINEER.
12 THK. EXPANSION JOINT WITH

MASTIC FILLER
12 THK. EXPANSION JOINT

WITH MASTIC FILLER
CHB WALL
3-
FOR SIZE AND SPACING OF HOR.

AND VERTICAL BARS SEE
CONSTRUCTION NOTES.
400
(DOWEL)
INTERSECTING R.C COL. OR WALL

30 BAR DIA.
(MIN.)
400
200
(DOWEL)

CONSTRUCTION NOTES.
D = FOR BEAM
t = FOR SLAB
10 STIRRUPS
@ 150 O.C.
1.
STRUCTURAL STEEL TO BE USED FOR FABRICATION AND ERECTION OF THIS STRUCTURE SHALL
COMPLY WITH ALL THE PERTINENT PROVISION OF AISC SPECIFICATION FOR THE DESIGN.
FABRICATION AND ERECTION OF STRUCTURAL STEEL FOR BUILDING LATEST EDITION.
2.
ALL STRUCTURAL STEEL SHAPES SHALL BE ASTM A 36 STRUCTURAL STEEL UNLESS

OTHERWISE INDICATED.
ALL WELDED CONNECTION SHALL DEVELOP THE FULL STRENGTH OF THE MEMBERS CONNECTED.
3.
30 BAR DIA.
(MIN.)
12 TOP BARS
2-
12 TOP BARS
SECTION
ELEVATION
4.
ALL BOLTS USED UNLESS OTHERWISE SPECIFIED SHALL BE ASTM A
307
BOLTS.
L1
MAIN BAR END HOOK

(ALL GRADES)
NOTES ON EMBEDED PIPES

A.
ALL EMBEDDED PIPES FOR UTILITIES, ETC. THAT PASS THRU BEAMS SHALL BE MAXIMUM 100mm
OR D/3 WHICHEVER IS LESS DIAMETER SINGLE RIGID GALVANIZED IRON PIPE UNLESS
OTHERWISE OR APPROVED IN WRITING BY THE STRUCTURAL ENGINEER.
B.
NO PIPES SHALL BE ALLOWED TO PASS THRU BEAMS VERTICALLY.
C.
NO PIPES SHALL BE EMBEDDED TO COLUMNS.
DOWEL BARS TO MATCH

CHB HOR. BARS
2-
db
4db or 85mm
10 BOTT. BARS @ 300 O.C.
200(MIN)
FIN. FLR. LVL
NOTES ON STRUCTURAL STEEL
10 BARS (AS SHOWN)
TYPICAL CHB FOOTING DETAILS

( WHERE APPLICABLE )
TYPICAL CONNECTION DETAIL OF MASONRY WALL
1 - 16 VERT.
BARS TYPICAL
WELDS SHALL DEVELOP THE FULL STRENGTH OF MEMBERS JOINED UNLESS OTHERWISE
SHOWN OR DETAILED IN THE DRAWINGS.
L
VERIFY DEPRESSION
INTERSECTION WALL
OPENING
2.
b
6d
400
CHB WALL.
USE E70xx ELECTRODES FOR ALL MEMBERS WELDED.
12db
L
16 VERT. BARS
1.
250
1-
(DOWEL)
300
R.C COLUMN OR WALL
400
(DOWEL)
ALL REINFORCEMENT SHALL BE BENT COLD UNLESS OTHERWISE PERMITTED BY

THE STRUCTURAL ENGINEER.
D db
400
(DOWEL)
CORNER WALL
200(MIN)
1.
db
OPENING OR END WALL
WINDOW
OPENING
NOTES OF STIRRUPS
TYPICAL CONNECTION DETAIL

OF R.C. WALL AT CORNERS
16 VERT. BARS

CONSTRUCTION NOTES.
38mm
CLEAR
550
10 BOTT. BARS @ 300 O.C.
CHB WALL
PROVIDE THESE ADDITIONAL BARS FOR

ALL OPENING PLUS BARS (NOT SHOWN)
PARALLEL TO SIDE OF OPENING EQUAL TO
THE NUMBER OF TERMINATED BARS AT
OPENING
4 - 16 VERT. BARS
550
10 BARS (AS SHOWN)
400

CONSTRUCTION NOTES.
SLAB
TYP. EXTERIOR WINDOW & DOOR OPENING
CHB WALL
1-
40
4 - 16 VERT. BARS
16 VERT. BARS
3-
10 x 1000 LONG
@300 O.C.
SEE ARCHITECTURAL & MECHANICAL

PLANS FOR SLAB OPENING LOCATION
550
1- 10
1- 10
1- 10
400
1- 10
1- 10
1- 12
3 - 10 BOTT. BARS
30 BAR DIA
50 (MIN.)
(MIN.)
250
14.0
200
200
200
10 BOTT. BARS @
300 O.C.
250
600
(MIN.)
MIN HEIGTH OF
CLEAR
TOTAL
REINFOCEMENT
SPAN
LENGTH
LINTEL
fc'
("L") (L+0.40M) (MPa)
(MM)
BOTTOM TOP
STIRRUPS
NAT. GRD. LVL
(DOWEL)
LINTELS IN BLOCK WALLS
20.0
@ 300mm O.C.
REINFORCED BAR SHALL HAVE 25mm CLEAR CONCRETE COVER FROM FACE OF WALL EXCEPT
FOR WALLS IN CONTACT WITH THE GROUND WHERE A MINIMUM OF 60mm SHALL BE PROVIDED.
AND FOR EXPOSED FACES OF FORMED WALLS WHERE THE MINIMUM SHALL BE 50mm CLEAR.
TYP. SECTION OF MASONRY

PARTITION REINFORCEMENTS
REINFORCING CONCRETE LINTEL BEAM IN CONCRETE BLOCK WALLS
3.40 M
3.70 M
4.00M
10 mm
@ 600mm O.C.
3.00 M
3.30 M
3.60M
@ 250mm O.C.
10 mm
2.50 M
2.90 M
3.10 M
10 mm
@ 600mm O.C.
2.10 M
2.40 M
2.70 M
100 mm
WHERE JOINTS IS AT POINT OF

STRESS, PROVIDE SHEAR RODS
WITH ENGINEERS APPROVAL
t/3
10 mm
1.60M
1.90 M
2.20 M
REMARKS
t/3
1 - 16 CONT. HOR. BARS

FOR FLOOR SLAB ONLY
VERTICAL
t/3
2. FOR REINFORCEMENTS SEE

CONSTRUCTION NOTES.
HORIZONTAL
VERTICAL
SECTION
WALL
THICKNESS
MAIN REINFORCEMENT TO BE
CONTINUOUS (TOP & BOTT BARS.)
A. MINIMUM LAPS AT SLICE = 0.25
75 mm
1.20 M
1.50 M
1.80 M
REINFORCEMENT
1.
WHERE A CONSTRUCTION JOINT IS TO BE MADE. THE SURFACE OF CONCRETE
SHALL BE CLEANED AND ALL LAITANCE AND STANDING WATER REMOVED.
D + 2db
NOTES
REINFORCEMENT
HORIZONTAL
VERTICAL
1. ALL JOINTS AND CELLS

CONTAINING REINFORCING
BARS SHALL BE FILLED WITH
CONCRETE GROUT.
ALL WALLS SHALL BE REINFORCED ACCORDING TO THE FOLLOWING SCHEDULE OF WALL

REINFORCEMENT UNLESS OTHERWISE INDICATED IN THE PLANS.
550
BLOCK THICKNESS
1.
NOTES ON CONCRETE HOLLOW BLOCKS WALL
D/3
400
SCHEDULE OF CONCRETE HOLLOW BLOCK AND CERAMIC BLOCK REINFORCEMENT
(DOWEL)
PROVIDE 150mm x 300mm STIFFENER COLUMN REINFORCED WITH 4-12mm WITH 6mm TIES AT
150mm ON CENTER WHERE CONCRETE HOLLOW BLOCK TERMINATES AND AT VERY 3.0M LENGTH OF
CONCRETE HOLLOW BLOCK WALLS UNLESS NOTED IN STRUCTURAL PLANS.
VERIFY ARCHITECTURAL
2.
FLR. SLAB OR BEAM
UNLESS OTHERWISE SHOWN IN PLANS ALL CONCRETE BLOCKS AND CERAMIC BLOCKS SHALL BE
REINFORCED AS SHOWN IN THE SCHEDULE OF CONCRETE HOLLOW BLOCKS AND CERAMIC BLOCK
REINFORCEMENT.
400
(DOWEL)
1.
NOTES ON CONCRETE WALL
DOWEL BARS TO MATCH

CHB VERT. BARS
D/3 D/3
NOTES ON CONCRETE HOLLOW BLOCKS WALL
D = FOR BEAM
2t = FOR SLAB
30 BAR DIA.
(MIN.)
BAR SIZE DIAMETER

(DEFORMED)
(mm)
10mm
60
75
12mm
16mm
95
20mm
115
25mm
150
28mm
240
32mm
300
D + 2db
75
100
125
150
200
300
335
TYPICAL DETAIL FOR BEAM

OR SLAB CHANGE SOFFIT
L
125
150
175
200
230
350
450
STIRRUP AND TIE HOOKS

(ALL GRADES)
L
150
200
250
300
450
550
600
BAR SIZE DIAMETER

(DEFORMED)
(mm)
10mm
40
12mm
50
16mm
65
20mm
115
25mm
150
D + 2db
125
165
200
250
365
L
85
115
140
165
230
L
100
115
150
300
450
TYP. DET. OF LINTEL BEAM AT CHB WALL OPENING

STRUCTURAL ENGINEER

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
PREPARED BY:
DRAWN BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
S-2
DATA ENCODER I
STRUCTURAL SPECIFICATIONS
DESIGNED BY:
SUBMITTED BY:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
13 28
B
A.1
2
A
S 3
5.A
6.A
SCALE:
1:125m
PROJECT/LOCATION:

MARIKINA CITY
2
B
FOUNDATION PLAN MAT FOOTING

ROSARIO, PASIG CITY
A.1
S 3
SHEET CONTENT:
CHECKED BY:
PREPARED BY:
DRAWN BY:
FOUNDATION PLAN MAT FOOTING

SECOND FLOOR FRAMING PLAN
DESIGNED BY:
5.A
SUBMITTED BY:
SECOND FLOOR FRAMING PLAN

SCALE:
6.A
1:125m

STRUCTURAL ENGINEER
APPROVED BY:
SET NO.:
CHARLES MARIN
S-3
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
14 28
B
A.1
2
A
S 4
5.A
6.A
SCALE:
1:125m
PROJECT/LOCATION:

MARIKINA CITY
2
B
THIRD FLOOR FRAMING PLAN

ROSARIO, PASIG CITY
A.1
S 4
SHEET CONTENT:
CHECKED BY:
PREPARED BY:
DRAWN BY:
THIRD FLOOR FRAMING PLAN

FOURTH FLOOR FRAMING PLAN
DESIGNED BY:
5.A
SUBMITTED BY:
FOURTH FLOOR FRAMING PLAN

SCALE:
6.A
1:125m

STRUCTURAL ENGINEER
APPROVED BY:
SET NO.:
CHARLES MARIN
S-4
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
15 28
DS
DS
DS
DS
DS
DS
T-1
DS
LT - 1
HT
-5
DS
HT
T-1
G-1
DS
T-1
LT - 1
DS
T-1
G-1
DS
LT - 1
DS
HT - 4
HT - 3
DS
G-2
G-1
LT - 1
T-2
T-2
HT - 3
T-2
DS
T-2
DS
T-2
DS
-2
DS
HT
DS
G-3
T-1
G-1
LT - 1
DS
DS
A.1
-1
HT
A.1
HT
A.1
HT - 3
DS
1
1
2
A
S 5
5.A
6.A
A
A 2
ROOFBEAM FRAMING PLAN

SCALE:


ROSARIO, PASIG CITY
DS
DS
R O O F
DS
F R A M I N G
SCALE:
5.A
P L A N
6.A
DS
DS
1:125m
1:125m
PROJECT/LOCATION:

MARIKINA CITY

STRUCTURAL ENGINEER
SHEET CONTENT:
CHECKED BY:
PREPARED BY:
DRAWN BY:
ROOF FRAMING PLAN

ROOF BEAM FRAMING PLAN
DESIGNED BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S-5
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
16 28
NOTES ON CONCRETE WORKS:

1. THESE DRAWINGS SHALL BE
READ IN CONJUNCTION WITH
RELEVANT ARCHITECTURAL
DRAWINGS.
2. MINIMUM COMPREHENSIVE
STRENGTH (f'c) OF CONCRETE
AT 28 DAYS SHALL BE 27.6 MPa.
U.N.O
0.15
10mm DIA. FRAMING BAR
12mm @300mm O.C.

12mm @150mm O.C.
12mm @300mm O.C.
12mm @300mm O.C.
12mm @ 150mm O.C.

12mm @300mm O.C.
12mm @300mm O.C.
12mm @300mm O.C.
3. MINIMUM YIELD STRENGTH

(f'y) OF REINFORCING BARS
SHALL BE :
- 414 MPa FOR BARS 16mm AND
BIGGER
-275 MPa FOR BARS 12mm AND
SMALLER
0.30
4. REINFORCING BARS SHALL
COMPLY WITH ASTM A705M.
12mm @150mm O.C.

0.20
12mm @150mm O.C.
12mm @300mm O.C.
NOTES ON STEEL WORKS:
10mm DIA. TEMP BARS
1. ALL STEEL ELEMENTS (PLATES

AND ANGLES) SHALL COMPLY
WITH ASTM A36.
12mm @300mm O.C.
16mm DIA. @ 200mm O.C.

TYPICAL TWO-WAY SLAB SHOWING
ARRANGEMENT OF TOP REINFORCEMENTS
TYPICAL TWO-WAY SLAB SHOWING

ARRANGEMENT OF BOTTOM REINFORCEMENTS
L1
L2
TOP
BAR
L
1/3
L
1/3
TOP
BAR
L
1/3
2. WELDING ELECTRODES SHALL

BE E70XX AND SHALL COMPLY
WITH AWS CODE.
12mm DIA. @ 200mm O.C.
3. WELDS AND WELDING

PROCEDURE SHALL COMPLY
WITH THE REQUIREMENTS OF
AWS CODE.
SCHEDULE OF SLAB
NOT
SLAB
SLAB
MARK THICKNESS
(mm)
BAR
DIAMETER
(mm)
4S-1
130
12
3S-1
130
12
2S-1
130
12
TB
BB
TB
BB
TB
BB
TO
SCALE
SHORT SPAN
BAR SPACING IN mm
COL STRIP
COL STRIP
DISCONT. MIDDLE
CONT.
150
300
150
300
150
300
150
300
150
300
150
300
150
150
150
BOTTOM
BAR
LONG SPAN
BAR SPACING IN mm
COL STRIP
COL STRIP
DISCONT. MIDDLE
CONT.
150
300
150
300
150
300
REMARKS
150
150
TYPICAL STAIR DETAILS

SCALE:
150
300
150
300
150
300
150
4. ANCHOR BOLTS SHALL

COMPLY WITH ASTM A307.
BOTTOM
BAR
ABBREVIATIONS:
1:20m
TB - TOP BARS
BB - BOTTOM BARS
O.C. - ON CENTER
TWO-WAY
L
1/6
TWO-WAY
L
1/5
L
2/5
LEGEND:
TWO-WAY
TYPICAL SLAB ELEVATION
TB - TOP BARS
BB - BOTTOM BARS
NOT
TO
ST1 - FABRICATED BOX SECTION

FROM 2L-X2X2X1/4 ANGLES
SCALE
VS1 - 12MM VERT. CROSS

BRACING
NOTES ON FOUNDATION:
2.50
2.25
1. FOOTINGS ARE DESIGNED

FOR AN ALLOWABLE SOIL
BEARING CAPACITY OF 95 KPa..
THE CONTRACTOR SHALL
REPORT TO THE ENGINEER IN
WRITING ACTUAL SOIL
CONDITIONS UNCOVERED AND
CONFIRMED ACTUAL BEARING
CAPACITY OF SOIL BEFORE
DEPOSITING CONCRETE.
3.00
8 EQUAL TREADS = 2400
1600
2. NO FOOTING SHALL REST ON

FILL.
1.00
TRANSVERSE BEAM REINFORCEMENT DETAIL

1:60m
L2/4 OR L3/4
12mm DIA. @
250mm O.C. BOTH
FACES
L2/4 OR L3/4
L1/8
L1/8
L2/8
L2/8
10 EQUAL RISERS @ 160 = 1600
L1/4 OR L2/4
L1/4 OR L2/4
2.00
L1/4
2 - 20mm DIA.
L3/8
2 - 16mm DIA.
600mm MIN.
2 - 16mm DIA.
40mm CONCRETE COVER
135
700
12mm dia. TOP BARS @ 250mm O.C.
W/ 10mm dia. @ 300mm O.C. TEMP BARS
LANDING LEVEL
550
STAIR SLAB THK. = 150mm & FIN (TYPICAL)
550
450
10mm dia. NOSING BARS (TYPICAL)
450
12mm dia. @ 270mm O.C. BOTTOM BARS

CUT-OFF ALTERNATE @ 450mm FROM
FACE OF SUPPORT W/ 10mm dia. TEMP.
BARS UP TO LOCATION OF CUT-OFF
BARS ONLY
700
10mm dia. @ 300mm O.C. CHAIR BARS (TYPICAL)
12mm dia. BOTTOM BARS @ 260mm O.C.

CUT-OFF ALTERNATE @ 500mm FROM
FACE OF SUPPORT (TYPICAL)
12mm dia. TOP BARS @

200mm O.C. (TYPICAL)
TOP BAR
WEB BAR
2B2
BEAM SPLICE DETAILS
5 - 20mm DIA.
STIRRUPS
12mm dia. VERTICAL BARS @ 250 mm O.C.

W/ 10mm dia. @ 300mm O.C. HORIZONTAL BARS
0.25
BEAM SECTION
TOP OF GRADE BEAM
GB-1
SECTION 2 - 2
TYPICAL ARRANGEMENT OF LONGITUDINAL REINFORCEMENTS

SCALE:
FIN. GRD. LN.
500
BOTTOM BAR
B
GROUND FLR. LN.
900
0.60
3200
SCALE:
2ND. FLR. LVL.
100
8.00
10 EQUAL RISERS @ 160 = 1600
1.00
3. ALL FOOTING SHALL BE

PROVIDED WITH 50mm THK.
LEAN CONCRETE.
SCALE:
1:20m
1:50m
DETAIL OF STAIRS

STRUCTURAL ENGINEER

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
SCHEDULE OF SLAB
TYP. SLAB ELEVATION
TRANSVERSE BEAM
REINFORCEMENTDETAIL
TYP. ARRANGEMENT OF
LONGITUDINALREINFORCEMENT
STAIR DETAILS
CHECKED BY:
PREPARED BY:
DRAWN BY:
DESIGNED BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S-6
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
17 28
MARK/
FLR.
6" CHB
0.65
SPLICING
1.00
Lv
Ln
25mm at 300mm O.C. B.W.

8.00
150mm LEAN CONCRETE

3.00
1.00
SCALE:
FROM FTG TO GD FLR
MAT FOOTING SECTIONAL DETAIL

NTS
75mm CONCRETE COVER
200
Lo
50
50
50
50
400
500
8 - 20mm DIA.
400
500
3 SETS 10mm DIA. TIES, FIRST 10 @ 100mm,
REST @ 200MM O.C.
40mm CONCRETE COVER

REST @ 200mm O.C.
40mm CONCRETE COVER
12- 25mm DIA.
8 - 25mm DIA.
400
500
REST @ 200MM O.C.
40mm CONCRETE COVER

REST @ 200mm O.C.
40mm CONCRETE COVER
12- 25mm DIA.
8 - 25mm DIA.
470
570
REST @ 200MM O.C.
75mm CONCRETE COVER

REST @ 200mm O.C.
75mm CONCRETE COVER
Lj
0.50
0.50
12- 20mm DIA.
400
6" CHB
Lo
6" CHB
C2
470
2.00
NGL
COLUMNS
C1
500
GB1
OF
570
FGL
GB1
Lj
40mm CONCRETE COVER
GB1
FROM GD FLR TO 4TH FROM 4th TO ROOF
VARIES
SCHEDULE
2.50
SECTION 1 - 1
SCALE:
150mm LEAN CONCRETE
MARK
TYPICAL TRUSS ACHORAGE DETAIL
ELEVATION OF COLUMN
BEAM SECTION
SCALE:
SCALE:
NTS
LONGITUDINAL REINFORCEMENTS
WEB BARS STIRRUPS
SPACING
WIDTH (mm) DEPTH (mm) BAR DIAM. DISCONT. END CONT. END MIDSPAN CONT. END DISCONT. END EACH FACE DIAMETER
RB1
200
350
RB2
200
350
4B1
250
600
4B2
250
500
4B3
250
500
4B4
250
450
4B5
200
500
3B1
300
600
3B2
250
500
3B3
250
550
SECTION
1:40m
16 TB
BB
16 TB
BB
20 TB
BB
20 TB
BB
20 TB
BB
20 TB
BB
16 TB
BB
25 TB
BB
25 TB
BB
25 TB
BB
4
2
3
2
5
2
4
2
4
2
4
2
5
2
4
2
3
2
3
2
4
2
3
2
5
2
4
2
4
2
4
2
5
2
4
2
3
2
3
2
2
4
2
3
2
5
2
4
2
4
4
2
2
5
2
4
2
3
2
3
4
2
3
2
5
2
4
2
4
2
4
2
5
2
4
2
3
2
3
2
4
2
3
2
5
2
4
2
4
2
4
2
5
2
4
2
3
2
3
2
10
10
1 - 12
10
1 - 12
10
1 - 12
10
1 - 12
10
1 - 12
10
1 - 16
10
1 - 16
10
1 - 16
10
MARK
FIRST 8 @ 100mm
REST @ 200mm O.C.
FIRST 8 @ 100mm
REST @ 200mm O.C.
FIRST 8 @ 100mm, NEXT 4 @ 150mm
REST @ 200mm O.C.
REST @ 200mm O.C.
REST @ 200mm O.C.
REST @ 200mm O.C.
REST @ 200mm O.C.
REST @ 200mm O.C.
REST @ 200mm O.C.
REST @ 200mm O.C.
NTS
BEAM SECTION
LONGITUDINAL REINFORCEMENTS
WEB BARS STIRRUPS
SPACING
WIDTH (mm) DEPTH (mm) BAR DIAM. DISCONT. END CONT. END MIDSPAN CONT. END DISCONT. END EACH FACE DIAMETER
3B4
250
450
3B5
200
500
2B1
300
650
2B2
300
550
2B3
300
550
2B4
300
450
2B5
200
500
GB1
250
500
LB-1
220
400
25 TB
BB
16 TB
BB
25 TB
BB
25 TB
BB
25 TB
BB
25 TB
BB
16 TB
BB
20 TB
BB
TB
BB
3
2
2
2
4
2
3
2
3
2
3
2
5
2
3
3
2
3
3
2
2
2
4
2
3
2
3
2
3
2
5
2
3
3
2
3
2
3
2
2
2
4
2
3
2
3
2
3
2
5
3
3
3
2
3
2
2
2
4
2
3
2
3
2
3
2
5
2
3
3
3
2
3
2
2
2
4
2
3
2
3
2
3
2
5
2
3
3
2
3
10
1 - 12
10
1 - 16
10
1 - 16
10
1 - 16
10
1 - 12
10
1 - 12
10
10
10

REST @ 200mm O.C.
FIRST 5 @ 100mm
REST @ 200mm O.C.
FIRST 10 @ 100mm, NEXT 4@150mm
REST @ 200mm O.C.
REST @ 250mm O.C.
REST @ 250mm O.C.
REST @ 250mm O.C.
FIRST 6 @ 100mm
REST @ 200mm O.C.
FIRST 5 @ 100mm
REST @ 200mm O.C.
FIRST 1 @ 50mm 2ND 6 @ 100mm
REST @ 150mm O.C.
SCHEDULE OF BEAMS

STRUCTURAL ENGINEER

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
ELEVATION OF CLOMUN
SECTION - 1
SCHEDULE OF BEAMS
TYPICAL TRUSS ACHORAGE DETAIL
MAT FOOTING SECTION DETAIL
SCHEDULE OF COLUMNS
CHECKED BY:
PREPARED BY:
DRAWN BY:
DESIGNED BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S-7
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
18 28
LEGEND:
A
2L 2 1/2" x 2 1/2" x 1/4"
2L 2" x 2" x 1/4"
L 2" x 2" x 1/4"
B
C
C
B
C
C
C
D E T A I L
A
S 8
O F
SCALE:
C
A
1:50m
PLAN
TOP OF TAPERED COLUMN
LEGEND:
A
2L 2 1/2" x 2 1/2" x 1/4"
2L 2" x 2" x 1/4"
L 2" x 2" x 1/4"
B
C
C
C
B
C
B
C
C
A
C
C
B
C
C
A
CONCRETE SUNBREAKER DETAIL
D
S 9
D E T A I L
F
S 8
O F
SCALE:
SCALE:
1:10m
1:50m
FINISH GROUND LVL.
SECTION
LEGEND:
CURVE PRATT TRUSS; 1-1/2"

PIPE VERT. & DIAGONAL
WEB MEMBERS
G.I.
E
S 8
D E T A I L
O F
SCALE:
PLAN
1:50m
C
S 9
C
S 9


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
SPOT DETAIL OF PARAPET AND TRUSS
DETAIL
SCHEDULE OF SLAB REINFORCEMENT
C2F1 DETAIL
CONCRETE SUNBREAKER DETAIL
DETAIL OF T - 1,DETAIL OF T - 2
DETAIL OF T - 3
DRAWN BY:
DESIGNED BY:
SCALE:
SCALE:
D E T A I L
1:50m
SPOT DETAIL OF PARAPET AND TRUSS DETAIL
CHECKED BY:
PREPARED BY:
C 2 F 1

STRUCTURAL ENGINEER
1:20m
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S-8
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
19 28
UP
LANDING
FF1
PARAPPET WALL LN.
A 11
D
1
W
1
W
2
CLASSROOM
FF1
CLASSROOM
FF1
W
2
W
1
CORRIDOR
FF1
CORRIDOR
FF1
W
2
W
1
D
1
PARAPPET WALL LN.
PARAPPET WALL LN.
PARAPPET WALL LN.
D
1
W
1
D
1
W
1
C
A 2
CLASSROOM
C
A 2
CLASSROOM
W
2
W
2
W
1
D
1
CORRIDOR
FF1
D
1
G
D
1
D
1
FF1
C
A 9
A
A 9
PARAPPET WALL LN.

1
2
3
4
D
1
D
4
D
2
FF1
D
4
D
4
B
B
A 9
UP
A.1
9 10 11 12
STO
W
3
D
2
W
1
W
1
W
3
RAMP UP
STAGE
FF1
UP
PARAPPET WALL LN.
A
A 8
1 2
5 4 3
2
1
CORRIDOR
FF1
W
2
W
2
D
1
D
1
W
2
D
1
W
2
MALE (CR)
FF2
D
2
D
2
D
4
8 7 6 5 4 3 2 1
D
4
W
3
D
4
CLASSROOM
CLASSROOM
FF1
FF1
UP
9 10 11 12
A.1
14 15 16
DN
W
3
UP
3 4 5
D
4
W
3
8 7 6 5 4 3 2 1
D
4
W
3
D
S 10
CORRIDOR
FF1
D
1
FEMALE (CR)
FF2
MULTI PURPOSE AREA

P.E. AREA
PARAPPET WALL LN.
D
3
FF1
B
A 9
D
2
D
1
URINAL
FF2
HE (CR)
FF2
W
3
A
A 9
C
A 9
SHE (CR)
FF2
PARAPPET WALL LN.
D
4
PARAPPET WALL LN.
W
2
W
1
URINAL
D
4
FF1
UP
W
2
CLASSROOM
W
2
W
2
CLASSROOM
G
W
1
W
1
FF1
FF1
W
1
W
2
W
2
W
1
W
2
D
1
UP
W
1
5
4
3
2
1
D
1
DN
PARAPPET WALL LN.
PARAPPET WALL LN.
D
A 5
D
A 5
A 11
CORRIDOR
FF1
W
1
W
1
W
3
PARAPPET WALL LN.
D
S 5
2 1
W
4
A
A 8
2
1
W
4
W
5
UP
UP
LEGEND:
1
A
G R O U N D
A 1


ROSARIO, PASIG CITY
F L O O R
SCALE:
5.A
6.A
FF1
- PLAIN CEMENT FINISH
FF2
- 200mmX200mm VITRIFIED
FLOOR TILES (UNGLAZED)
1
B
P L A N

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
5.A
SCALE:
SUBMITTED BY:
6.A
CONCURRED BY:
TYPICAL 2ND TO 4TH FLOOR PLAN
A 1
1:125m
PROJECT/LOCATION:
DANILO M. MARCIAL
1:125m

PAGCOR
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
GROUND FLOOR PLAN

SECOND FLOOR PLAN
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-2
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
2 28
B
B
LEGEND:
LINE OF T - 1
LINE OF T - 1
A
B
C
2L 2 1/2" x 2 1/2" x 1/4"
2L 2" x 2" x 1/4"
C
C
L 2" x 2" x 1/4"
2L 2 1/2" x 2 1/2" x 1/4"
2L 2" x 2" x 1/4"
L 2" x 2" x 1/4"
LEGEND:
B
C
C
D E T A I L
S 9
O F
D E T A I L
L T - 1
1:40m
S 9
SCALE:
O F
H T - 1
SCALE:
C
C
D E T A I L
C
S 9
1:50m
O F
SCALE:
H T - 2
1:50m
LEGEND:
B
B
B
C
C
C
2L 2" x 2" x 1/4"
L 2" x 2" x 1/4"
2L 2 1/2" x 2 1/2" x 1/4"
C
C
C
C
A
A
D E T A I L
H
S 9
O F
H T - 3
SCALE:
1:50m
D E T A I L
S 9
O F
D E T A I L
H T - 4
SCALE:
D E T A I L
S 9
1:50m
G
S 9
SCALE:
G - 1
F
S 9
1:30m
O F
SCALE:
H T - 5
1:50m
O F
D E T A I L
SCALE:
O F
G - 2
E
S 9
1:30m
D E T A I L
SCALE:
O F
G - 3
1:30m
D
S 9
PARAPET AND TRUSS DETAIL

SCALE:
1:30m

STRUCTURAL ENGINEER

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
DETAIL OF LT - 1
DETAIL OF HT - 1 TO HT -5
DETAIL OF G1 - G3, PARAPPET AND
TRUSS DETAIL
CHECKED BY:
PREPARED BY:
DRAWN BY:
DESIGNED BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S-9
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
20 28
A.1
RAMP UP
C
S 10
8
D
S 10
D
S 10
A
S 10
P L A N
O F
O F
SCALE:
R A M P
C
S 10
1:10m
SPOT DETAIL 'A - A'

SCALE:
1:5m
R A M P
SCALE:
1:75m
NON SKID
B
S 10
P L A N
PLAIN CEM
ENT
SPOT DETAIL 'B - B'

SCALE:
1:50m
B
S 10
C
S 10
DETAIL - ELEVATION OF RAMP

SCALE:
1:50m

STRUCTURAL ENGINEER

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
DETAIL - ELEVATION OF RAMP

PLAN OF RAMP
SPOT DETAIL 'A - A'
SPOT DETAIL 'B - B'
CHECKED BY:
PREPARED BY:
DRAWN BY:
DESIGNED BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
CHARLES MARIN
S - 10
DATA ENCODER I
MANUEL Y. MADRID
ENGINEER II
SHEET NO.:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
21 28
LEGEND :
SYMBOLS
GENERAL NOTES:
DESCRIPTION
SYMBOLS
DESCRIPTION
1.
S3W
M
- CEILING LIGHT OUTLET
- CIRCUIT HOMERUN
EXISITNG APPLICABLE ORDINANCES, RULES & REGULATIONS OF THELOCAL GOVERNMENT & WITH THE REQUIREMENTS OF THE LOCAL POWER
- DISTRIBUTION PANEL BOARD W/ SOLID NEUTRAL
- JUNCTION BOX OR PULL BOX WITH COVER
COMPANY.
- THREE WAY DEVICE SWITCH
- UNDERGROUND OR UNDER FLOOR CONDUIT RUN
2.
THE TYPE OF POWER SUPPLY SHALL BE SINGLE PHASE 220V, 2 - WIRE 60 HZ A.C.
- FIRE ALARM CONTROL PANEL
3.
ALL WIRINGS SHALL BE INSTALLED IN STANDARD RIGID STEEL CONDUITS RUN EMBEDDED INSIDE THE CONCRETE AND HOLLOW BLOCKS STRUCTURES,
- ELECTRIC SERVICE METER
FACP
- SERVICE ENTRANCE
B
ALL ELECTRICAL WORKS SHALL BE DONE IN ACCORDANCE WITH THE PROVISIONS OF THE LATEST EDITION OF THE PHILIPPINE ELECTRICAL CODE,
SLABS, COLUMNS, WALLS, PARTITIONS AND / OR CONCEALED BETWEEN DOUBLE WALL WOODEN PARTITIONS AND INSIDE THE CEILING SPACES,
- ELECTRIC RISER
- VIBRATING BELL OUTLET
- FIRE ALARM BELL OUTLET
WHERE THE USE OF CONCEALED CONDUIT WIRING IS IMPRACTICABLE, SURFACE METAL MOUDLING MAY BE USED.
- SINGLE POLE TUMBLER SWITCH

4.
- DUPLEX CONVENIENCE OUTLET
DIAMETER, RESPECTIVELY.
- CONCEALED OR EMBEDDED CONDUIT RUN
- WEATHER PROOF CONVENIENCE OUTLET
- MAIN DISTRIBUTION PANEL BOARD
- EMERGENCY LIGHT
S3
- GROUNDING SYSTEM
UNLESS OTHERWISE INDICATED ON THE PLANS, THE MINIMUM SIZES OF WIRE AND RIGID STEEL CONDUIT TO BE USED SHALL BE 2.0mm2 AND 15mm
5.
ALL LIGHTING CIRCUIT HOMERUNS AND CONVENIENCE OUTLETS SHALL BE WIRED WITH NOT LESS THAN 3.5mm2 TW IN SIZE, UNLESS OTHERWISE
INDICATED ON THE PLANS.
- THREE WAY TUMBLER SWITCH
6.
- PUSH BUTTON
WHEREVER REQUIRED AND NECESSARY, PULL BOXES AND JUNCTION BOXES OF PROPER SIZES SHALL BE INSTALLED AT CONVENIENT AND
INCONSPICUOUS LOCATIONS, ALTHOUGH SUCH BOXES ARE NOT SHOWN ON THE PLANS NOR MENTIONED IN THE SPECIFICATIONS.
7.
ALL NON-CURRENT METAL PARTS OF EQUIPMENT / DEVICES SUCH AS PANELBOARD ACB AND THE LIKE SHALL BE PROPERLY GROUNDED IN
ACCORDANCE WITH THE PROVISIONS OF ARTICLE 4, PHILIPPINE ELECTRICAL CODE.
8.
9.
ALL WALL OUTLETS SHALL BE INSTALLED AT THE FOLLOWING HEIGHTS ABOVE THE FINISHED FLOOR LEVEL UNLESS OTHERWISE NOTED:
A. WALL SWITCHES
1200mm
C. FIRE ALARM STATION OUTLET
1500mm
B. CONVENIENCE OUTLETS
300mm
D. PUSH BUTTON OUTLET
1200mm
ALL ELECTRICAL WORKS / INSTALLATIONS SHALL BE DONE IN STANDARD WORKSMANSHIP MANNER WITH SKILLED MANPOWER DULYSUPERVISED BY A
REGISTERED ELECTRICAL ENGINEER.
CEILING LINE
DPD
B
THHN )
SYMBOL
MOUNTINGL /
INSTALLATION
DESCRIPTION
T-5 2-28W FLOURESCENT LAMP
REFLECTORIZED SURFACE
MOUNTED W/OUT LOUVRE
ELECTRONIC BALLAST 220V 60HZ
FOURTH FLOOR LINE
FS
TO MDP-4
DPC
B
THHN )
SURFACE CEILING
MOUNTED
THIRD FLOOR LINE
FS
TO MDP-3
DPB
T-5 1-28W FLOURESCENT LAMP

REFLECTORIZED SURFACE
MOUNTED W/OUT LOUVRE
ELECTRONIC BALLAST 220V 60HZ
SURFACE CEILING
MOUNTED
THHN )
SECOND FLOOR LINE
FS
TO MDP-2
5400
MDP
DPA
TO MDP LINESIDE
P.B.
1800
TW )
FS
CONNECT TO NEAREST O.C.
2-22mm2 BARE COPPER
FACP
GROUND FLOOR LINE

FINISH GRADE LINE
FIRE ALARM
FIRE ALARM
ENCLOSED ACB RATED

20AT, 2P, 240V
GROUNDIN ROD COPPER WELD
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
GENERAL NOTES, RISER DIAGRAM,

SCHEDULE OF PANELBOARD
PREPARED BY:
ANTHONY C. GONZALES
ENGINEER II
E-1
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
22 28
2c
3Sabc
3Sabc
2b
1a
2b
2a
3Sabc
2a
DPA
1
2a
2c
3Sabc
3Sabc
1d
G
2c
1e
2Sef
2b
2c
2b
2b
1d
G
2c
2b
2Scd
2Scd
DPA
1
1c
2b
1e
2b
2Sef
2a
2c
1c
I
2c
3Sabc
2a
2a
2c
2b
J
1b
2a
2b
2Sab
2Sab
1a
2c
1b
2c
UP
2b
2a
2c
2b
DN
K
2c
UP
LANDING
UP
1f
2a
2a
1n
Sgh
1 k
2Sjk
1g
2Slm
1i
DPA
2Si
MDD
DPA
3
2Sno
2Spq
2Sab
2Scd
2a
2c
2b
2d
FACP
A.1
1
1m
2a
2c
2b
DPC
1
DPD
1
1 k
A.1
2d
DPC
2
Sgh
j
2Sjk
2Si
DPD
2
1n
URINAL
1g
2Sno
2Spq
2Sabc
2Sdef
2a
2a
A.1
DPB
DPC
S3W
1 l
A.1
DPB
3
DPC
3
1m
STO
S
DPB
1
2a
S3W
1 l
2a
S = 1:16
1 j
2Slm
DPB
2
1f
DPD
3
2c
2b
UP
RAMP UP
UP
ELECTRIC SERVICE ENTRANCE

220V, 1 - PHRASE 2 WIRE
UP
UP
TO CONNECT TO S3W @ 2ND FLOOR
STAIRWAY LANDING
4
A
E 2
GROUND FLOOR LIGHTING LAYOUT

SCALE:
1:125m
E 2
TYPICAL 2ND TO 4TH FLOOR
LIGHTING LAYOUT
SCALE:
1:125m
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
GROUND FLOOR & TYPICAL 2ND TO 4TH

FLOOR LIGHTING LAYOUT
PREPARED BY:
ANTHONY C. GONZALES
ENGINEER II
E-2
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
23 28
UP
FF
FF
J
WP
FF
FF
2Sef
2Sef
WP
FD
FD
H
WP
RISER UP TO SIMILAR
OUTLET
FS
RISER UP TO SIMILAR
OUTLET
FS
FC
FC
2Scd
2Scd
WP
FB
FB
F
WP
DPC
4
UP
DPD
4
DPA
5
FA
2Sab
DPB
5
DPC
5
DPD
5
D
WP
WP
FACP
A.1
A.1
DPB
6
DPA
7
STO
3Scde
WP
A
E 3
UP
WP
UP
UP
A.1
DPD
6
RAMP UP
UP
DPC
6
WP
3Sfgh
WP
C
DPB
DPC
DPD
A.1
WP
F j
MDD
2Sij
2Sgh
S = 1:16
DPA
WP
FH
WP
WP
FG
URINAL
DPA
6
2Sab
DPB DPC DPD

7
7
7
F i
2Sab
FA
DPB
4
F
WP
DN
UP
LANDING
GROUND FLOOR POWER LAYOUT

SCALE:
2
E 3
1:125m
TYPICAL 2ND TO 4TH FLOOR POWER LAYOUT

SCALE:
1:125m
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I

FLOOR POWER LAYOUT
PREPARED BY:
ANTHONY C. GONZALES
ENGINEER II
E-3
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
24 28
LANDING
UP
DN
UP
SEPTIC
VAULT
UP
(SEE DETAIL)
E
D
FD
PVCSS
WC
WC
FD
LAV
PVCSP
LAV
CO
URI
FD
PVCSS
WC
WC
FD
LAV
WC
PVCSP
LAV
CO
URI
CO
FD
SS
SS
S = 1:16
CO
FD
FD
B
WC
UP
PVCSP
PVCSS
DN
CO
RAMP UP
UP
2
1
4
A
P 1
PVCSS
PVCSP
2 1
2
1
UP
UP
CO
UP
5 4 3
A.1
FD
CO
CO
A.1
STO
PVCSP
UP
PVCSP
WC
WC
FD
CO
CO
A.1
LAV
WC
WC
CO
WC
A.1
FD
SS
LAV
GROUND FLOOR SEWER LINE LAYOUT

SCALE:
1:125m
P 1
TYPICAL 2ND TO 4TH FLOOR SEWER LINE LAYOUT

SCALE:
CONCURRED BY:
1:125m
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I

FLOOR SEWER LINE LAYOUT
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
P-1
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
25 28
UP
LANDING
DN
UP
F
UP
WC
WC
LAV
WC
URI
PVC CWL
PVC CWL
D
LAV
SS
PVC CWL
WC
LAV
URI
SS
S = 1:16
SS
WC
SS
B
WC
WC
UP
A.1
WC
UP
A.1
LAV
WC
A.1
WC
A.1
F
LAV
WC
STO
RAMP UP
UP
DN
UP
TAP TO MAIN
WATER LINE
5 4 3
2
1
2 1
2
1
UP
UP
4
A
P 2
3
B
GROUND FLOOR WATER LINE LAYOUT

SCALE:
P 2
1:125m
TYPICAL 2ND TO 4TH WATER LINE LAYOUT

SCALE:
1:125m
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I

FLOOR WATER LINE LAYOUT
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
P-2
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
26 28
LANDING
CB
CB
CB
CB
PVCDS
PVCDS
CB
PVCDS
DN
CB
CDP
UP
PVCDS
TAP TO MAIN
STORM DRAIN
CB
CB
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
UP
A.1
A.1
UP
A.1
F
DN
A
PVCDS
PVCDS
STO
PVCDS
PVCDS
C
B
PVCDS
A.1
F
PVCDS
D
C
CB
LAV
C
B
PVCDS
PVCDS
E
CB
PVCDS
E
D
PVCDS
CB
PVCDS
CB
PVCDS
CB
PVCDS
CB
PVCDS
PVCDS
CB
PVCDS
PVCDS
CB
PVCDS
PVCDS
CB
PVCDS
PVCDS
CB
PVCDS
PVCDS
UP
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
PVCDS
UP
CB
CB
CB
CB
CB
5 4 3
2
1
2
1
UP
CB
CDP
CB
TAP TO MAIN
STORM DRAIN
2
A
P 3
G R O U N D
5
F L O O R
S T O R M
6
D R A I N A G E
3
B
L A Y O U T
SCALE:
1:125m
P 3
TYPICAL 2ND TO 4TH STORM DRAINAGE LAYOUT

SCALE:
CONCURRED BY:
1:125m
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I

FLOOR STORM DRAINAGE LAYOUT
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
P-3
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
27 28
SCALE : NOT TO SCALE
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
GENERAL NOTES, LEGENDS,CATCH BASIN

DETAILS, AND SEPTIC TANK DETAILS
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
P-4
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
28 28
8
1
5.A
6.A
APEX OF ROOF
DS
DS
TOP OF ROOF BEAM
DS
DS
DS
DS
DS
W
3
W
3
W
3
W
3
W
3
W
3
W
3
W
3
W
5
W
4
W
1
W
1
W
1
W
1
W
1
THIRD FLOOR LVL
SECOND FLOOR LVL
GROUND FLOOR LVL
F R O N T
E L E V A T I O N
SCALE:
1:125m
DS
DS
DS
DS
DS
E
D
W
4
W
1
FOURTH FLOOR LVL
NATURAL GRADE LINE
A 2
DS
W
1
DS
W
1
DS
DS
CEILING LN.
1
APEX OF ROOF
DS
DS
C
B
TOP OF ROOF BEAM
DS
DS
CEILING LN.
A.1
A
A.1
D
1
W
2
D
1
W
2
D
1
W
2
W
2
D
1
D
1
W
2
D
1
D
1
W
2
D
1
D
1
W
2
W
2
D
1
FOURTH FLOOR LVL
DS
DS
DS
2
A
A 2
DS
4
P
5
L
SCALE:
DS
5.A
6.A
DS

ROSARIO, PASIG CITY
W
2
W
2
W
2
D
1
THIRD FLOOR LVL
D
1
SECOND FLOOR LVL
GROUND FLOOR LVL
N
CONCURRED BY:
1:125m
C
A 2
W
2
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
R E A R
E L E V A T I O N
SCALE:
DANILO M. MARCIAL
PAGCOR
1:125m
SUBMITTED BY:
NATURAL GRADE LINE
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
ROOF PLAN
REAR ELEVATION
FRONT ELEVATION
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-3
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
3 28
5.A
6.A
APEX OF ROOF
TOP OF ROOF BEAM
SEE TRUSS DETAIL
CEILING LN.
CORRIDOR
FOURTH FLOOR LVL
CORRIDOR
THIRD FLOOR LVL
CORRIDOR
SECOND FLOOR LVL
CORRIDOR
GROUND FLOOR LVL
SHE (CR)
SHE (CR)
SHE (CR)
SHE (CR)
STO
EARTHFILL / EMBANKMENT
W
4
DESCRIPTION:
W
5
AWNING WINDOW WITH FIXED

GLASS PANEL, 14" THK.
TEMPERED CLR. GLASS ON
ANALOK FINISH ALUMINUM
FRAMING
NATURAL GRADE LINE
AWNING WINDOW WITH FIXED

GLASS PANEL, 14" THK.
TEMPERED CLR. GLASS ON
ANALOK FINISH ALUMINUM
FRAMING
SETS:
2 SETS
1 SETS
LOCATION:
FACADE
FACADE
A 2
C R O S S
S E C T I O N
SCALE:
1:125m
F.F.L
F.F.L
D
1
DESCRIPTION:
SOLID CORE PANEL DOOR SWING

TYPE w/ TRANSOM, 14" THK., ORD.
CLR. FIXED GLASS, ON 50x150mm
WOOD JAMBS/FRAMES
SETS:
LOCATION:
D
2
HOLLOW CORE FLUSH TYPE SWING DOOR ON
50x150mm YACAL GUIJO JAMB W/ MARINE PLYWOOD
FACING INSIDE AND ORDINARY OUTSIDE COMPLETE W/
HARDWARE AND ACCESSORIES
D
3
D
4
TOILET (DISABLED)
HOLLOW CORE FLUSH TYPE SWING DOOR ON 50x150mm GUIJO/YACAL JAMB w/

MARINE PLYWOOD FACING INSIDE AND ORDINARY OUTSIDE COMPLETE W/
HARDWARE AND ACCESSORIES PROVIDE KICK PLATE
W
1
TOILET (CUBICLE)
HOLLOW CORE FLUSH TYPE SWING DOOR, (MARINE

PLYWOOD, BOTH SIDES) ON 50X100 YACAL/GUIJO DOOR
JAMB COMPLETE WITH HARDWARE ACCESSORIES
36 SETS
12 SETS
1 SETS
20 SETS
CLASSROOMS
(SHE/HE) / STAIRS
DISABLED
COMFORT ROOM
S C H E D U L E
O F
DESCRIPTION:
W
2
STEEL CASEMENT WINDOW WITH 41" THK. ORD.

CLEAR GLASS
JALOUSIE TYPE WINDOW WITH 14" THK. ORD. CLR.

GLASS TRANSOM

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
AWNING WINDOW WITH 41" THK. ORD. CLEAR

GLASS
SETS:
32 SETS
36 SETS
8 SETS
LOCATION:
@ CLASSROOMS
@ CORRIDOR / CLASSROOMS
@ STAIRS / COMFORT ROOM
D O O R S
A N D
W I N D O W S
SCALE:
W
3
CONCURRED BY:
DANILO M. MARCIAL
1:40m
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:

PAGCOR
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
SCHEDULE OF DOORS AND WINDOWS

CROSS SECTION
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-4
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS
REYNALDO
ROBERTOG.S.TAGUDANDO
NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL
DISTRICT ENGINEER
DIRECTOR
4 28
ROOF APEX LINE
TOP OF BEAM
CEILING LINE
W
3
W
1
W
1
W
1
W
1
W
1
W
3
W
1
FOURTH FLOOR CORRIDOR

FINISH FLOOR LINE
W
3
W
1
W
1
W
1
W
1
W
1
W
3
W
1
THIRD FLOOR CORRIDOR

FINISH FLOOR LINE
W
3
W
1
W
1
W
1
W
1
W
1
W
3
W
1
SECOND FLOOR CORRIDOR

FINISH FLOOR LINE
F
W
3
W
1
W
1
W
1
W
1
W
1
A 6
W
3
W
1
GROUND FLOOR CORRIDOR

FINISH FLOOR LINE
A.1
L E F T
A 4
SCALE:
S I D E
NATURAL GRADE LINE
E L E V A T I O N
1:125m
ROOF APEX LINE
TOP OF BEAM
CEILING LINE
W
2
D
1
D
1
W
2
W
2
D
1
D
1
W
2
W
2
D
1
A
A 6

FINISH FLOOR LINE
W
2
D
1
D
1
W
2
W
2
D
1
D
1
W
2
W
2
D
1
FINISH FLOOR LINE
W
2
D
1
D
1
W
2
W
2
D
1
D
1
W
2
W
2
D
1
FINISH FLOOR LINE
F
A 6
D
3
W
2
D
3
D
1
D
1
W
2
W
2
D
1
D
1
W
2
W
2
D
1
FINISH FLOOR LINE
B
A 4


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
RIGHT
NATURAL GRADE LINE
SCALE:
DANILO M. MARCIAL
1:125m
CHECKED BY:
DRAWN BY:
CONCURRED BY:
SIDE ELEVATION

PAGCOR
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
RIGHT SIDE ELEVATION

LEFT SIDE ELEVATION
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-5
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
5 28
A.1
ROOF APEX LINE
SEE TRUSS DETAIL

TOP OF BEAM
CEILING LINE
D
4
D
4
D
3
D
4

FINISH FLOOR LINE
D
3
FINISH FLOOR LINE
D
3
FINISH FLOOR LINE
F
A 6
D
3
D
3
FINISH FLOOR LINE
A
A 5
5.A
6.A
LONGIT UDINAL
SCALE:
NATURAL GRADE LINE
SECTION
1:125m
5.A
6.A
A 8
W
1
W
1
W
1
W
1
PB
PB
B
STAGE
PLAIN CEMENT FIN
ELEV = + 0.90m
UP
ELEV = + 0.54m
2
1
PB
A 5
5 4 3
PB
ELEV = + 0.54m
3 4 5
1 2
A 8
UP
PLANT BOX
PB
FRONT
ELEVATION
STAGE
SCALE:
SCALE:
1:50m
1:100m
2 1
2
1
PB
UP
UP
ELEV = + 0.00m
ELEV = + 0.00m
D
A 5
BLOW UP PLAN @ STAGE WITH STAIRS

SCALE:
CONCURRED BY:
1:75m
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
LONGITUDINAL SECTION
BLOW UP PLAN @ STAGE
FRONT ELEVATION @ STAGE
SECTION
DATA ENCODER I
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-6
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
6 28
A
A 6
HANDRAIL ELEVATION
B
A 6
BLOW UP DETAIL
E
A 6
BLOW-UP DET.
C
A 6
F
A 6
TAPERED COLUMN DET.
ICONIC DESIGN ELEVATION

CONCURRED BY:
D
A 6

ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
DANILO M. MARCIAL
CURVE PRATT TRUSS DET.
SUBMITTED BY:

PAGCOR
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
ICONIC DESIGN ELEVATION
CURVE PRATT TRUSS DETAIL
HANDRAIL DETAIL
BLOW UP DETAIL
TAPERED COLUMN DETAIL
DATA ENCODER I
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-7
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
7 28
2
B
2
B
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
UP
A.1
UP
A.1
A.1
9 10 11 12
9 10 11 12
STO
D
3
DN
9 10 11 12 13 14 15 16
DN
W
3
W
3
W
3
@ SECOND TO THIRD FLOOR
@ FOURTH FLOOR
@ GROUND FLOOR
A
A 8
B L O W
U P
P L A N
S T A I R S
SCALE:
1:50m
B
A8
C
A8
D
A8
NOSING DETAIL
STAIR DETAIL
CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
BLOW UP PLAN @ STAIRS
NOSING DETAIL
STAIR DETAIL
DATA ENCODER I
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-8
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
8 28
2
C'
3
B
D
4
A'
A.1
D
3
D
4
D'
B'
A
A9
D
4
W
3
MALE (CR)
FF2
E'
D
3
F'
D'
W
3
C.R. DETAIL @ GROUND FLOOR (PWD)
D
4
E'
D
4
W
3
FEMALE (CR)
FF2
D
A'
F'
D
3
B'
C
A9
C.R. DETAIL @ GROUND FLOOR (HE)
C'
B
A9
C.R. DETAIL @ GROUND FLOOR (SHE)
W
3
F
A9
W
3
SECTION B'- B'
D
A9
SECTION F'- F'

B
A 10
SECTION C'- C'
E
A9
W
3
G
A9
I
A9
SECTION A'- A'

A
A 10
H
A9
C
A 10
SECTION E'- E'
SECTION D'- D'

CONCURRED BY:
DANILO M. MARCIAL
PAGCOR


ROSARIO, PASIG CITY
PROJECT/LOCATION:

MARIKINA CITY
SHEET CONTENT:
C.R. DETAIL @GROUND FLOOR DETAIL
(PWD) / C.R. DETAIL @GROUND FLOOR
DETAIL (SHE) / C.R. DETAIL @GROUND
FLOOR DETAIL (HE) / SECTION A' - A' /
SECTION B' - B' / SECTION C' - C' /
SECTION D' - D' / SECTION E' - E' /
SECTION F' - F'
CHECKED BY:
DRAWN BY:
SUBMITTED BY:
APPROVED BY:
SET NO.:
SHEET NO.:
CHARLES MARIN
DATA ENCODER I
PREPARED BY:
MANUEL Y. MADRID
ENGINEER II
A-9
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR
9 28


ROSARIO, PASIG CITY
LOCATION / NAME OF PROJECT :
PREPARED BY:
CONSTRUCTION OF (4) FOUR STOREY (20)

TWENTY CLASSROOM SCHOOL BUILDING STA.
ELENA HIGH SCHOOL, MARIKINA CITY
CHECKED BY:
MANUEL Y. MADRID
ENGINEER II
SUBMITTED BY:
APPROVED BY:
LUISITO C. PONCIANO
EULOGIO V. YDIO
ROBERTO S. NICOLAS

ENGINEER III
DISTRICT ENGINEER
REGIONAL DIRECTOR

10 PDF

Uploaded by

Copyright:

Available Formats

10 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

10 PDF

Uploaded by

Copyright:

Available Formats

I N D E X

A1 - PERSPECTIVE VIEW, SUMMARY OF QUANTITIES

E1 - GENERAL NOTES, RISER DIAGRAM, SCHEDULE OF PANELBOARD

S1 - GENERAL CONSTRUCTION NOTES

CONSTRUCTION OF (4) FOUR STOREY (20)

FIRST METRO MANILA ENGINEERING DISTRICT

SITE DEVELOPMENT PLAN

CONSTRUCTION OF (4) FOUR STOREY

SPECIAL PROJECT ENGINEER

PERSPECTIVE VIEW, INDEX OF SHEETS,

OIC - CHIEF PLANNING AND DESIGN SECTION

OIC - ASSISTANT DISTRICT ENGINEER

REPUBLIC OF THE PHILIPPINES

FIRST METRO MANILA ENGINEERING DISTRICT

CONSTRUCTION OF (4) FOUR STOREY

OIC - CHIEF PLANNING AND DESIGN SECTION

OIC - ASSISTANT DISTRICT ENGINEER

FOURTH FLOOR LVL.

DETAIL SECTION OF STAIRS

BLOW UP PLAN OF STAIRS @ GROUND FLOOR (FIRE EXIT)

THIRD FLOOR LVL

SECOND FLOOR LVL

CRASH RAILING DETAIL

FINISH GROUND LVL

NATURAL GROUND LVL

BLOW UP PLAN OF STAIRS @ 2ND FLOOR TO 4TH FLOOR (FIRE EXIT)

SPOT DETAIL (CRASH RAILING)

REPUBLIC OF THE PHILIPPINES

FIRST METRO MANILA ENGINEERING DISTRICT

SPOT DETAIL 'B - B'

CONSTRUCTION OF (4) FOUR STOREY

SPOT DETAIL 'A - A'

SPECIAL PROJECT ENGINEER

OIC - CHIEF PLANNING AND DESIGN SECTION

OIC - ASSISTANT DISTRICT ENGINEER

GENERAL CONSTRUCTION NOTES

2. FOR SIMILAR CONDITIONS MODIFY TYPICAL DETAILS AS REQUIRED TO MEET SPECIAL

6. INSPECTION - ALL WORKSMANSHIP AND CONSTRUCTIONS SHALL BE SUBJECT TO INSPECTION

8. THE CONTRACTOR SHALL SUBMIT THE SCHEDULE OF POURING AND THE

300mm EACH WAY

250mm EACH WAY

200mm EACH WAY

175mm EACH WAY

150mm EACH WAY

9. THE CONTRACTOR SHALL FURNISH AND MAINTAIN ADEQUATE FORMS

PROVIDE EXTRA REINFORCEMENTS FOR CORNER SLAB (TWO ADJACENT

CONCRETE SLAB REINFORCEMENTS SHALL BE PROPERLY SUPPORTED WITH 10mm O

1. FOOTINGARE DESIGNER FOR AN ALLOWABLE SOIL BEARING PRESSURE

2. FOOTING SHALL REST AT LEAST 1500mm BELOW NATURAL GRADE LINE

TYPICAL CORNER SLAB DETAIL

B. COLUMNS AND SHEAR WALLS---------------------------------fy = 414 Mpa ( 60,000 psi )

MAINTAIN MINIMUM CONCRETE COVER FOR REINFORCING STEEL AS FOLLOWS.

ALL REINFORCING BARS SIZE 10mm OR BIGGER SHALL BE DEFORMD IN

ACCORDANCE W/ ASTM A 706, BARS.

SPLICES SHALL BE SECURELY WIRED TOGETHER & SHALL LAP OR EXTEND IN

ACCORDANCE W/ TABLE A & TABLE B ( TABLE OF LAP SPLICE & ANCHORAGE

LENGTH ) UNLESS OTHERWISE SHOWN ON DRAWINGS, SPLICES SHALL BE

WALLS ABOVE GRADE----------------------------------------------------------25mm

NOTES ON CONCRETE SLABS