Separatoare

Final Drawings
Customer:
DSME
Hull / Project:
H1195 / H1196
WS-Ordernumber: 452946646 / 452946721
Contents
1.
Installation Instruction, Graphical Symbols
2.
HFO
3.
LO
Installation Instructions
For
Separators
No.
2058-9601-020
Edition
0211
GEA Mechanical Equipment / GEA Westfalia Separator Group
2058-9601-020 / 0211
ORIGINAL INSTRUCTION MANUAL

Subject to modification!
The authors are always grateful for comments and suggestions for improving
the documentation. They can be addressed to:
GEA Mechanical Equipment
GEA Westfalia Separator Group GmbH

Werner-Habig-Str. 1, 59302 Oelde (Germany)
Phone +49 2522 77-0, Fax +49 2522 77-2488
ws.info@geagroup.com, www.westfalia-separator.com
Westfalia Separator
2058-9601-020 / 0211
Preface
These installation guidelines
are part of the overall documentation compiled for the separator.
describe the procedures for constructing, manufacturing and designing separators.
contain fundamental instructions for installing separator installations.
contain general guidelines for separator installations.
These guidelines specify the minimum specifications for designing and
constructing frames, tanks, piping and the electrical installation.
Putting together and installing the installation components must be
carried out in accordance with the order-specific documents:
Installation diagram and equipment list
Dimensioned drawing (notes on required space for operating and
servicing, minimum clearance from walls/pillars or other machines)
We reserve the right to carry out technical modifications on the
separator!
Attention must be paid to the operating, maintenance and mounting
instruction manuals of all units and fittings.
For your safety

Take special care when carrying out operations marked with this
symbol otherwise danger to life!
Strictly adhere to instructions marked with this symbol.
This avoids damage to the separator and other equipment.
Note: This symbol is not a safety precaution but rather a reference to infor-
mation which help to better understand the separator or plant components and the processes.
Use only genuine spare parts from GEA Westfalia Separator. The original spare parts are listed in the spare parts catalog.
The use of non-genuine parts leads to:
safety risks,
reduced durability of these parts,
reduced availability of the separator and
increased service requirement.
If a safety risk occurs when using non-original spare parts, this may have legal
consequences for the responsible persons. In such cases, GEA Westfalia
Separator accepts no liability or warranty claims.
Westfalia Separator
2058-9601-020 / 0211
General
1.1
1.2
1.3
1.4
1.4.1
1.5
1.5.1
1.6
2.7
2.7.1
2.8
2.9
2.9.1
2.9.2
37
Compressed air quality .......................................................................... 38

Supply pressure ..................................................................................... 38
Compressed air consumption of the separators OSD, OSE and OTC.. 38
Product lines
5.1
5.2
5.3
33
Water quality .......................................................................................... 34

Supply pressure and temperature ......................................................... 34
Water connection for operating, filling and displacement water ............ 35
Dimensions and number of consumers ................................................. 35
Water quantity ........................................................................................ 36
Compressed air
4.1
4.2
4.3
19
Space requirement for separators ......................................................... 20

Separators with belt drive ...................................................................... 20
Bowl weights .......................................................................................... 22
Required hoist specifications for separators.......................................... 23
Ventilating the separator room .............................................................. 23
Foundations ........................................................................................... 25
Securing the separators ......................................................................... 27
Separators OSD 6, 18, 35, 60, OSE 5, 10, 20, 40, 80 and
OTC 5, 10, 20 ........................................................................................ 28
Welding procedure for fastening the foundation frame ......................... 29
Installing the separator .......................................................................... 30
Vibrations ............................................................................................... 31
Pipelines on the separator ..................................................................... 32
Product line ............................................................................................ 32
Operating, filling and displacement water lines ..................................... 32
Operating, filling and displacement water

3.1
3.2
3.3
3.4
3.5
Safety precautions ................................................................................... 8

Material .................................................................................................... 8
Installation ................................................................................................ 8
Storage .................................................................................................. 10
Installation of controls ............................................................................ 10
Transport................................................................................................ 12
Transporting the separator .................................................................... 14
Preservation measures on site .............................................................. 18
Separator
2.1
2.1.1
2.2
2.3
2.4
2.5
2.6
2.6.1
39
General .................................................................................................. 40
Pipe cross-sections ................................................................................ 40
Functional description ............................................................................ 40
Westfalia Separator
2058-9601-020 / 0211
5.4
5.5
5.6
5.6.1
5.6.2
5.7
5.8
5.9
5.9.1
5.9.2
5.9.3
5.9.4
5.10
5.11
Solids tank
6.1
6.1.1
6.1.2
6.2
6.2.1
6.2.2
6.2.3
6.3
6.3.1
Information on pressure monitoring ....................................................... 40

Piping ..................................................................................................... 42
Maximum suction head .......................................................................... 43
Pressure line .......................................................................................... 43
Pre-filter ................................................................................................. 44
Feed pump ............................................................................................. 44
Oil pre-heater ......................................................................................... 44
Installation examples ............................................................................. 45
Steam-heated plate heat exchanger with (PI controlled) control valve . 45
Steam-heated tubular heat exchanger with (PI controlled)
control valve ........................................................................................... 46
Thermal oil-heated plate heat exchanger with (PI controlled) control
valve....................................................................................................... 47
Thermal-oil-heated tubular heat exchanger with (PI controlled)
control valve ........................................................................................... 48
Securing plate heat exchangers ............................................................ 49
Safety valve ........................................................................................... 50
Recommended criteria for solids tank ................................................... 52

Tank vent ............................................................................................... 53
Set-up of the solids tank venting ........................................................... 54
Solids discharge lines ............................................................................ 55
Solids discharge lines with shut-off flap................................................. 56
Standard installation of shut-off flaps .................................................... 56
Installation recommendation for shut-off flaps ....................................... 57
Operating and dirty water discharge lines ............................................. 58
Separators of OSD and OSE ................................................................. 58
Electrical installation
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.2
7.3
7.3.1
7.3.2
7.3.3
7.4
7.5
7.6
7.6.1
7.6.2
7.6.3
7.6.4
7.6.5
7.7
7.8
51
61
Control cabinet ....................................................................................... 62

Electrical connection .............................................................................. 64
External voltages ................................................................................... 64
Shipboard operation .............................................................................. 65
Onshore operation ................................................................................. 65
Electro-magnetically compatible installation .......................................... 66
Valves .................................................................................................... 67
Solenoid valve block .............................................................................. 67
Terminal box .......................................................................................... 68
Separator with sensor bloc .................................................................... 69
Dual-purpose thermometer .................................................................... 70
Electrical installation of transmitters and electric motors ....................... 71
Electrical execution ................................................................................ 71
Earthing the separator ........................................................................... 72
Voltage equalisation of the separator .................................................... 72
Voltage equalization of the electric heater ............................................. 73
Voltage equalization of the foundation frame ........................................ 73
Voltage equalisation of the control cabinet ............................................ 74
Electric motors procured by the customer ............................................. 75
Installation and operation of control units .............................................. 76
Westfalia Separator
2058-9601-020 / 0211
Note
Notes
Notizen
Anotaciones

Muistiinpanot
Notater
Notes
Note
Westfalia Separator
2058-9601-020 / 0211
General
1.1
1.2
1.3
1.4
1.4.1
1.5
1.5.1
1.6
Safety precautions ................................................................................... 8

Material .................................................................................................... 8
Installation ................................................................................................ 8
Storage .................................................................................................. 10
Installation of controls ............................................................................ 10
Transport................................................................................................ 12
Transporting the separator .................................................................... 14
Preservation measures on site .............................................................. 18
Westfalia Separator
2058-9601-020 / 0211
1.1
Safety precautions
Pay special attention to the safety precautions contained in the
overall documentation compiled for the separator!
1.2
Material
The specified material must conform to the standards set out in these installation guidelines as a minimum requirement.
All materials used must be new and from the same series.
1.3
Installation
Fig. 1
1
2
3
4
5
6
Installation example
Separator:
Separator foundation
Control unit
Control cabinet
Preheater
Solids tank
7
8
9
10
11
Solids tank venting

Crane
Cleaning table
Aeration
Venting
The applicable regulations and standards of classification societies or other

authorised bodies must be observed.
All lubricating points and the gear / drive housing of the separator must be
easily accessible without having to remove pipes or gratings.
All operating elements must be within comfortable reach of the operator and
at a suitable height.
Operating elements must not be mounted higher than 1800 mm above the
working platform.
All units must be arranged so that they do not cramp the working area and so
that they can be safely serviced and operated.
Westfalia Separator
2058-9601-020 / 0211
All fixed piping and fittings must be safely supported to reduce vibrations and
movement to a minimum.
Contact points or supports must be fitted so that the pipes are able to move
with changing temperatures without creating tension in the pipes.
Pipes and pipe connections must be accessible for maintenance.
Pipes must not be used for supporting distributors or appliances.
These regulations and standards do not apply to small purpose-built parts
whose durability, accessibility and operation are not influenced. They must be
fitted in accordance with the manufacturer's recommendations.
No galvanized parts may be fitted in product-carrying lines (e.g. heavy oil,
diesel oil, steam lines and thermal oil lines). This does not apply if type-tested
pipe joints are fitted in pipe trace heating systems.
Y-strainers should preferably be fitted horizontally with the strainer insert
pointing downwards or to the side (turned through 90).
If this is not possible for space reasons, the dirt pan can be fitted vertically
with a throughflow from top to bottom. In this case, ensure that the strainer
can be dismantled.
Westfalia Separator
10
2058-9601-020 / 0211
1.4
Storage
Parts may be stored only in original GEA Westfalia Separator transport packaging.
A storage time of more than 12 months is only possible after consulting the
manufacturer.
The storage site should be a closed, dry room.
The storage temperature must not be below 5C (41 F) and must not exceed
50 C (122 F).
IMPORTANT:
Outdoor exposure is not admissible!
Pay attention to the following points on storage and transport packaging.
Handle fragile goods with care!
Protect the goods against moisture and humidity.
Protect the goods against heat!
Pay attention when erecting the goods.
1.4.1 Installation of controls

IMPORTANT:
Select the installation site so that
the control unit is not exposed to dust and aggressive atmosphere.
the control unit is not installed in an excessively humid environment or
damp area.
the sun cannot shine on the control panel or displays making operation and
observation more difficult.
heating up of the control unit is avoided.
Where appropriate, check screw-type and plug-type connectors for secure
contact.
Westfalia Separator
11
2058-9601-020 / 0211
Connect thermostatically controlled cabinet heating to external voltage and

switch it on.
The control cabinet heating must switch on before the temperature drops below the dew point.
Bedewing can occur during the night which is not good for electronic apparatus.
Check that the line voltage and frequency conform to the connection data of
the control unit (see nameplate).
Pay attention to admissible installation and operating data:
Voltage fluctuations
Frequency fluctuations
Ambient temperatures
Atmospheric humidity
Installation height
Transport temperatures
+/- 10 % of the line voltage

+ 5 to + 45 C (41 to 113 F)
max. 50 % at 40 C (104 F)
max. 90 % at 20 C (68 F)
above sea level up to 1000 m
25 to + 55 C (13 to 131 F)
IMPORTANT:
Improper installation and operation discharges the supplier from the warranty
obligation.
Westfalia Separator
12
2058-9601-020 / 0211
1.5
Transport
The adjacent packing illustrates a
seaworthy packaging from GEA Westfalia Separator.
Fig. 2
After removing the side boards and

filling material, the bottom board can
be used as a special pallet for fork
lift trucks.
Fig. 3
If no forklift trucks are available,

transport the case with the aid of a
crane (see diagram).
Attach the ropes to the points on the
packing case as marked on the
packing case.
Fig. 4
Westfalia Separator
13
2058-9601-020 / 0211
Attach ropes round the case and

hang them into the load hook of the
crane.
CAUTION!
Wind one piece of rope twice
round the hook to prevent the
ropes from slipping.
Fig. 5
Westfalia Separator
14
2058-9601-020 / 0211
1.5.1 Transporting the separator

IMPORTANT:
To avoid damage, the bowl must be
removed from the separator before
transport.
The separator is normally delivered
without installed bowl.
Exception:
The OTC 2, OTC 3, OSD 2 and
OSE 5 separators are delivered and
transported with installed bowl.
Fig. 6
CAUTION!
Prevent accidents by using suitably rated hoists for transport and installation.
When transporting rope, make sure
that one piece of rope is wound
twice round the hook to prevent the
The rope must be properly attached
to the separator.
Ensure that no pulling or pushing
forces act on machine parts when
using ropes.
Fig. 7
The following examples show how the transport ropes must be attached on the
different frame designs (see Fig. 8 Fig. 13).
Westfalia Separator
15
2058-9601-020 / 0211
For OSD 6 or 18 and OSE 5, 10 and 20 separator with belt drive

Screw double nipple 1 into the hole
in the frame.
Fig. 8
Attach the transport ropes

to the machine as illustrated and
hang them into the load hook of
the hoist as illustrated.
Make sure that the ropes do not
damage any machine components.
Do not use the eye bolt of the
motor to suspend the separator.
Make sure the machine touches
down gently.
Fig. 9
Westfalia Separator
16
2058-9601-020 / 0211
For OSD 35 and OSE 40 separator with belt drive

Screw two eye bolts 1 into the upper
section of the frame.
Screw double nipple 2 into the hole
in the frame.
Fig. 10

around the double nipple.
Thread through the eye bolts and
down gently.
Fig. 11
Westfalia Separator
17
2058-9601-020 / 0211
For OSD 60, OSE 80 and 120 separator with belt drive
Check that
two eye bolts 1 are screwed into
the upper section of the frame.
Screw two eye bolts 2 with washers 3 into the intermediate flange /
frame holes.
Fig. 12

Thread through the four eye bolts
and
down gently.
Fig. 13
Westfalia Separator
18
2058-9601-020 / 0211
1.6
Preservation measures on site

After installation until commissioning
All parts such as tools, spare parts and bowl must be stored in the original
packaging in a suitable place until commissioning.
The parts must be stored at 5 to 50 C (41 - 122 F) in dry, weatherproof
rooms to prevent the packaging from getting damaged.
The spindle and gear/drive chamber are lubricated at the factory which protects them for a period of 12 months.
In the case of a storage and standstill period of longer than 12 months, the
time-dependent maintenance intervals specified in the instruction manual
must be adhered to before putting the machine back into operation.
After this time (12 months) has expired, it must be checked at 12 monthly intervals that all bearings and the spindle have sufficient lubrication.
Oil to be used:
Shell oil S.7294 (SAE 30/SAE 50) for bearings and spindle,
roller bearing grease for the spindle cap.
Westfalia Separator
19
2058-9601-020 / 0211
Separator
2.1
2.1.1
2.2
2.3
2.4
2.5
2.6
2.6.1
2.7
2.7.1
2.8
2.9
2.9.1
2.9.2
Space requirement for separators ......................................................... 20

Separators with belt drive ...................................................................... 20
Bowl weights .......................................................................................... 22
Required hoist specifications for separators.......................................... 23
Ventilating the separator room .............................................................. 23
Foundations ........................................................................................... 25
Securing the separators ......................................................................... 27
Separators OSD 6, 18, 35, 60, OSE 5, 10, 20, 40, 80 and
OTC 5, 10, 20 ........................................................................................ 28
Welding procedure for fastening the foundation frame ......................... 29
Installing the separator .......................................................................... 30
Vibrations ............................................................................................... 31
Pipelines on the separator ..................................................................... 32
Product line ............................................................................................ 32
Operating, filling and displacement water lines ..................................... 32
Westfalia Separator
20
2058-9601-020 / 0211
2.1
Space requirement for separators

No piping may be laid in the operating area apart from the feed and discharge
lines for the separator.
2.1.1 Separators with belt drive

The hatched area represents the operating area.
See the following table to determine the operating area.
Before installing the separator, pay special attention to the removal dimension
X for the electric motors!
Front view of separator
Fig. 14
Side view of separator
Fig. 15
Top view of separator
Fig. 16
Westfalia Separator
21
2058-9601-020 / 0211
Table for determining the operating area for separators with belt drive
Separator
model
OTC 2
OTC 3
OTC 5
OTC 10
OTC 20
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
A
800
800
1400
1400
1400
800
1400
1400
1800
2000
1400
1400
1400
1800
2000
B
300
300
600
600
600
300
600
600
700
800
600
600
600
700
800
Dimensions in mm
D
E
F
G
800
120
280
800
120
280
1200 400 1250 375
1400 550 1450 540
1400 550 1550 630
800
200
280
1400 550 1450 540
1400 550 1550 630
1800 650 1950 850
2000 700 2500 1000
1200 400 1250 375
1400 550 1500 540
1400 550 1650 630
1800 650 2080 850
2000 700 2250 1000
X
100
100
540
540
630
100
180
180
230
300
540
180
180
230
300
Y
150
150
150
150
150
150
150
150
200
200
150
150
150
200
200
Westfalia Separator
22
2058-9601-020 / 0211
2.2
Bowl weights
Fig. 17
Table with data for rating the lifting device

Separator model
OSD 6
OSD 18
OSD 35
OSD 60
OTC 5
OTC 10
OTC 20
Separator model
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
Bowl weight
[kg]
255
300
425
536
220
260
315
270
320
420
530
225
265
310
42
72
190
360
25
40
52
Bowl weight
[kg]
220
260
315
440
560
225
265
310
450
570
30
45
65
205
400
Westfalia Separator
23
2058-9601-020 / 0211
2.3
Required hoist specifications for separators

Flat belt separators
The hoist must be travel-type or swivel-type.
The hoist must be arranged so as to enable the following:
Vertical fitting and removal of the bowl (see section 2.1.1, table - dimension
F).
Horizontal removal and fitting of the drive motor (see section 2.1.1, table dimension X).
2.4
Ventilating the separator room

Pay attention to the correct arrangement of the air feed and discharge lines so
that
the separator room is efficiently ventilated,
the admissible room temperature normally max. 45 C (113 F) is not
exceeded.
The rating of the electrical apparatus is critical in this respect.
IMPORTANT:
If the admissible temperatures are exceeded, additional measures must be
taken. Maintenance intervals and maintenance measures may have to be adjusted accordingly.
Installation example of a ventilation
system
1
2
Aeration
Venting
Fig. 18
Approximate values for air exchange

For small closed separator rooms
For large separator rooms
For niches in engine rooms
-1
30 - 50 h
-1
15 - 20 h
-1
50 - 70 h
Westfalia Separator
24
2058-9601-020 / 0211
Table for air volumes pressed out of the housing

Separator
model
OTC 2
OTC 3
OTC 5
OTC 10
OTC 20
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
Air volume
[m/h]
10
10
10
10
10
10
10
30
100
150
10
10
30
100
150
Westfalia Separator
25
2058-9601-020 / 0211
2.5
Foundations
In order to avoid the influence of external vibrations,
Foundations and foundation frames for separators must not be rigidly connected to other foundations.
IMPORTANT:
If the foundation does not have adequate rigidity and flexural strength, this
may result in loss of warranty.
Installation example for a foundation frame
1 Foundation
Fig. 19
The foundation frames must be designed so that dimensions a and b in

the table below are adhered to.
When using other sections, the section modulus of the U-sections must
not be lower than the value specified
in DIN 1026.
The foundation must be rigid with a
maximum admissible deflection of
1:250.
The separator feet must be fastened
on the neutral axis of the frame.
Fig. 20
Westfalia Separator
26
2058-9601-020 / 0211
Table for dimensioning foundation frames

Separator
model
OTC 2
OTC 3
OTC 5
OTC 10
OTC 20
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
Dimensions in mm
a
b
80
60
80
60
80
60
80
60
80
60
80
60
140
60
140
60
180
70
180
70
140
60
140
60
140
60
180
70
180
70
Westfalia Separator
27
2058-9601-020 / 0211
2.6
Securing the separators

The following sections show how to secure the different separators:
Separators OTC 2, OTC 3, OSD 2
Assembly of separators with the aid of
rubber-metal cushions on a steel foundation frame.
Fig. 21
Screw rubber-metal cushions 4 into

foundation 5.
Screw studs 2 into rubber-metal
cushions 4.
Place plate 3 over the studs.
Place the separator on plate 3 and
bolt tight with hexagon nuts 1.
Fig. 22
ATTENTION!
The tightening torque for the stud screw 2 (M10) must be 30 Nm.
Westfalia Separator
28
2058-9601-020 / 0211
2.6.1 Separators OSD 6, 18, 35, 60, OSE 5, 10, 20, 40, 80 and OTC 5, 10, 20
Align separator 1 with feet 2 and
plates 3 on foundation 4.
Tack plates 3.
Unscrew screws 5.
Lift separator with feet (see section
1.5.1).
Weld plates 3 to foundation 4.
Place the separator on plates 3 and
bolt tight with hexagon nuts 5.
Screw tight hex head screws 6.
Fig. 23
ATTENTION!
The torques for the hex head screw 6 are specified in the table below.
Separator model
OSD 6
OSD 18
OSD 35
OSD 60
Hex head screw
Torque
M 12
52 Nm
M 16
100 Nm
M 12
52 Nm
M 16
100 Nm
M 12
52 Nm
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
OTC 5
OTC 10
OTC 20
Westfalia Separator
29
2058-9601-020 / 0211
2.7
Welding procedure for fastening the foundation frame

The following sections show the welding procedure for fastening the foundation
frame:
Mounting the separator installations
on board of a ship
The foundation frame 2 can be directly welded onto the steel structure
2 from the shipyard.
Fig. 24
Example 1
The length of the weld seams must
be 100 mm.
The distance between the weld
seams must be approx. 350 mm.
This means that that there are 3 weld
seams with a length of 100 mm along
a length of one metre.
Fig. 25
Example 2
The foundation frame can likewise
be welded all the way round.
Detail view
In this view you can see an example
for welding the foundation frame to the
steel structure.
The letter X indicates a fillet weld.
Fig. 26
Westfalia Separator
30
2058-9601-020 / 0211
2.7.1 Installing the separator

Mounting the separator installations
on board of a ship
The frames must be fitted beneath
the separator feet.
The dimension a for the frame distance must be observed.
The position of the separator feet is
given in section 2.1.1.
Fig. 27
The dimension a for the frame distance is given in the table below for
the respective separator model.
Fig. 28
Separator model
OTC 2
OTC 3
OTC 5
OTC 10
OTC 20
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
Dimension a
[mm]
452 mm
452 mm
326 mm
350 mm
425 mm
452 mm
350 mm
425 mm
555 mm
700 mm
326 mm
350 mm
425 mm
555 mm
700 mm
Westfalia Separator
31
2058-9601-020 / 0211
2.8
Vibrations
Fig. 29
Admissible vibration value at the

reference point
[mm/s]
OTC 2
1,8
2,8
OTC 3
1,8
2,8
OTC 5
2,8
4,5
OTC 10
2,8
4,5
OTC 20
2,8
4,5
OSD 2
1,8
2,8
OSD 6
2,8
4,5
OSD 18
2,8
4,5
OSD 35
2,8
4,5
OSD 60
2,8
4,5
OSE 5
3,5
5,5
OSE 10
2,8
4,5
OSE 20
2,8
4,5
OSE 40
2,8
4,5
OSE 80
2,8
4,5
Measured at separator standstill and normal ship operating conditions
Measured with separators in operation
The Vibro sensor is attached in this range
Separator
model
Tolerable vibration values at the

separator installation surface
max. [mm/s]
Limit values for Vibro 1

with installed vibration
sensor
[mm/s]
2,8
2,8
4,5
4,5
4,5
2,8
4,5
4,5
4,5
4,5
5,5
4,5
4,5
4,5
4,5
Westfalia Separator
32
2058-9601-020 / 0211
2.9
Pipelines on the separator

The following sections describe the general set-up of the piping system in the
separator installation:
2.9.1 Product line

Product lines must be laid
in accordance with the guidelines of GEA Westfalia Separator or
in accordance with the requirements of the classification societies.
Use only genuine parts from GEA Westfalia Separator!
The lines must be flushed before commissioning to protect the valves and
units.
The following lines must have no rigid connection with the separator in order
to prevent vibrations:
Product feed and discharge
Water connection
Solids discharge
Dirty water discharge
Frame drain
This can be realised by means of hoses or compensators, whereby there are
special requirements for shockproof separators.
Hose pipes must be laid so that they cannot be twisted, kinked, clamped or
rubbed.
Use only hoses from GEA Westfalia Separator!
2.9.2 Operating, filling and displacement water lines

Water lines must be laid so that they can be completely drained at the lowest
point with no dismantling.
Y-strainers are fitted horizontally at the factory with the strainer insert pointing downwards. See section 1.3 Installation.
The solenoid valves for operating, filling and displacement water to the separator are fitted so that the hose between the separator and solenoid valves
cannot empty.
Westfalia Separator
33
2058-9601-020 / 0211
Operating, filling and displacement water

3.1
3.2
3.3
3.4
3.5
Water quality .......................................................................................... 34

Supply pressure and temperature ......................................................... 34
Water connection for operating, filling and displacement water ............ 35
Dimensions and number of consumers ................................................. 35
Water quantity ........................................................................................ 36
Westfalia Separator
34
2058-9601-020 / 0211
3.1
Water quality
The water should be as pure as possible and meet the following standards:
Hardness:
up to 55 C (131 F) separating temperature
< 12 dH
above 55 C (131 F) separating temperature
< 6 dH
Note:
When using demineralised water or condensate, corrosion must be
reckoned with.
The use of boiler feed water is not permissible!
Land water is not recommended because the degrees of hardness are
normally too high.
To convert the hardness values stated, use the following equation:
1 dH = 1,79 fH = 1,25 eH = 17,9 ppm CaCO3
pH
Chloride ions
Suspended matter
Particle size
3.2
6,5 8,5
< 100 mg/l
max. 10 mg/l
max. 50 m
Supply pressure and temperature
Fig. 30
Note:
The pressure after the water pressure reducer must not drop below 0.2 Mpa
with open operating water valve.
The supply pressure and the temperature for the operating, filling and displacement water must meet the following specifications:
Temperature
min. 10 C (50 F)
max. 85 C (185 F)
Supply pressure
0.3 1.0 MPa
Westfalia Separator
35
2058-9601-020 / 0211
3.3
Water connection for operating, filling and displacement water

Pay special attention to section 2.9.2!
3.4
Dimensions and number of consumers

Collective lines must be dimensioned so that the separators are always supplied with an adequate water volume to assure perfect functioning.
Lines must be laid so that manual override of the valves and filter replacement are possible.
The maximum length between pressure reducer and solenoid valve must not
exceed 5 m.
In the case of 1 consumer, the collective line must have the same
nominal diameter as the feed lines
to the separator.
The nominal diameter R is given in
the table below.
Fig. 31
Fig. 32
In the case of 2 consumers:

the collective line must have a nominal diameter S (see table).
the supply lines to the separator must have a nominal diameter R (see table).
Note:
When two separators request water at different times, the water supply can be
rated as for one separator.
Westfalia Separator
36
2058-9601-020 / 0211
In the case of 3 consumers:

the collective line must have a nominal diameter of DN 32.
the supply lines to the separator must have a nominal diameter R (see table).
Table for selecting the nominal diameters S and R.

Nominal diameter (DN)
Separator model
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
3.5
Collective line
S
Supply line
R
25
25
25
32
32
25
25
25
32
32
20
20
20
20
20
20
20
20
20
20
Water quantity
For exact program control, with simultaneous actuation of the valves, the following water quantities are required:
Separator
model
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
V2
V2
V3
Filling water
Displacement water
Operating
water
l/s
0,25
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
l/s
0,25
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
l/s
0,25
0,5
0,8
0,8
0,8
0,5
0,5
0,5
0,8
0,8
Total consumption
per cycle
Total consumption
per cycle
without
filling water
Approx. 1
2
1,5
3
2
5
3,5
10
6,5
23
13
1,6
1,1
2,3
1,5
3,2
2,0
11,6
7,6
25,4
15,4
* Ejection cycle = (filling water + displacement water + operating water)
Westfalia Separator
37
2058-9601-020 / 0211
Compressed air
4.1
4.2
4.3
Compressed air quality .......................................................................... 38

Supply pressure ..................................................................................... 38
Compressed air consumption of the separators OSD, OSE and OTC.. 38
Westfalia Separator
38
2058-9601-020 / 0211
4.1
Compressed air quality

The compressed air must be free from impurities and dry.
4.2
Supply pressure
Recommended set-up of compressed air line per treatment system.
Fig. 33
OSD separators
A supply pressure of 0.3 to max. 1.0 MPa is admissible.

After the reducer station 0.3 MPa must still be available to the consumers.
Note:
On OSD separators, a compressed air control unit is no longer included in the
standard scope of supply.
If other pneumatic components are operated, the corresponding instructions
relating to air quality and air lubrication must be observed.
4.3
Compressed air consumption of the separators OSD, OSE and OTC

The maximum compressed air consumption per separator is approx. 0.01
3
Nm /h.
Westfalia Separator
39
2058-9601-020 / 0211
Product lines
5.1
5.2
5.3
5.4
5.5
5.6
5.6.1
5.6.2
5.7
5.8
5.9
5.9.1
5.9.2
5.9.3
5.9.4
5.10
5.11
General .................................................................................................. 40
Pipe cross-sections ................................................................................ 40
Functional description ............................................................................ 40
Information on pressure monitoring ....................................................... 40
Piping ..................................................................................................... 42
Maximum suction head .......................................................................... 43
Pressure line .......................................................................................... 43
Pre-filter ................................................................................................. 44
Feed pump ............................................................................................. 44
Oil pre-heater ......................................................................................... 44
Installation examples ............................................................................. 45
Steam-heated plate heat exchanger with (PI controlled) control valve . 45
Steam-heated tubular heat exchanger with (PI controlled)
control valve ........................................................................................... 46
Thermal oil-heated plate heat exchanger with (PI controlled) control
valve....................................................................................................... 47
Thermal-oil-heated tubular heat exchanger with (PI controlled)
control valve ........................................................................................... 48
Securing plate heat exchangers ............................................................ 49
Safety valve ........................................................................................... 50
Westfalia Separator
40
2058-9601-020 / 0211
5.1
General
Pay special attention to section 1.3!
The suction lines should be as short as possible to avoid pressure losses.
The pipes must be installed with adequate clearance from the electronic
parts.
Water pockets must be avoided! (water must be able to flow off freely).
When different products are run through the same separator, it must be ensured that the corresponding product lines cannot be interchanged.
5.2
Pipe cross-sections
All pipes, valves, fittings and instruments must be laid so that an insulation of
40 mm is possible.
Dimensioning of the pipes is specified on the respective P&ID.
The pipes can be selected with the aid of the following diagram. The specifications on the P&IDs have priority!
Pipe resistances must be kept as low as possible.
Taking into account the total pressure losses, the flow velocities must be
between 0.5 m/s and < 1 m/s in suction lines,
between 1 m/s and 3 m/s in pressure lines.
5.3
Functional description
The liquid is discharged from the separator by means of a pumping device, in
the following referred to as centripetal pump. At small capacities, the discharge
can be without pressure; in the case of larger capacities the centripetal pump
generates the required pressure to convey the liquid out of the separator
through the downstream lines by immersing more deeply into the liquid.
The pressure values can differ significantly. The following rule applies: The values are lower on small separators than on large separators.
Further influencing factors are capacity, system resistances (valve position, tank
position), product properties and process specifications.
5.4
Information on pressure monitoring

When the liquid is discharged from the separator under pressure, the operator
knows that the separator bowl is hydraulically closed.
A discharge pressure adjusts given a constant capacity or it is adjusted to the
desired value by throttling in the discharge.
In the standard application, the pressure sensor responds to falling discharge
pressure, an alarm is triggered via the control system. The control system can
also evaluate rising pressure and trigger an alarm.
Generally, the discharge pressure is set to 0.1 0.2 MPa. The pressure level
can deviate from this when separator size, capacity, product properties and
process specifications require. (for further information, see the order-specific
documentation)
Westfalia Separator
41
2058-9601-020 / 0211
A change in the discharge pressure may be caused by the following factors:

Change in feed capacity
Change in product data such as temperature, density, viscosity
Change in discharge resistance
Leakage at the separator bowl
This represents important information for the operator.
Selection diagram
Fig. 34
Q
v
Flow
Velocity in m/s
Example:
3
A flow rate of 5 m /h produces a velocity of 1.2 m/s with a nominal diameter of

40.
Westfalia Separator
42
2058-9601-020 / 0211
5.5
Piping
Fig. 35
Lubrication oil schematic
1 LO tank
When separating lube oil, the return line of the 3/2-way valve can be led into
the product discharge line of the separator.
Fig. 36
Diesel oil schematic
1 DO tank
2 Service tank
When separating diesel oil, the return line of the 3/2-way valve must be led
into the DO tank 1.
WS does not permit leading the return line into the suction side of the
pump!
Westfalia Separator
43
2058-9601-020 / 0211
Fig. 37
Heavy fuel oil schematic
1 Settling tank
2 Service tank
When separating heavy oil, the return line of the 3/2-way valve must be led
into the settling tank 1.
5.6
Maximum suction head

The suction head of the feed pump (gear pump) is max. 0.04 Mpa.
The suction head of the feed pump (screw pump) is max. 0.05 MPa.
The viscosity of the oil to be conveyed must be kept < 1 000 cSt, if necessary
by adequate pre-heating and trace heating.
When dimensioning the suction line, it must be ensured that the total pressure
loss in the pipe does not exceed the maximum suction head of the pump.
The maximum feed pressure in the suction line must not exceed 0.05 MPa.
5.6.1 Pressure line

The pressure head of the feed pump is set to approx. 0.3 MPa.
The pressure line from the feed pump via the pre-set valve, the pre-heater
and the 3/2-way valve to the separator must be kept as short as possible.
When dimensioning the pressure line, it must be ensured that the total pressure loss in the pipes does not exceed the maximum pressure head of the
pump.
Westfalia Separator
44
2058-9601-020 / 0211
5.6.2 Pre-filter
The pre-filters are fitted in the suction line of the feed pump to protect it from
coarse impurities.
During the installation, special attention must be paid to the operability.
Use only strainers with a mesh width
of the strainer insert of 1 to 1.25
mm.
Pay special attention to section 1.3!
Fig. 38
Use only pre-strainers with a mesh

width of the strainer insert of 0.63
mm.
Fig. 39
5.7
Feed pump
To prevent the pre-heater from overheating,
a pump post-running time must be programmed for pump units and product
pre-heating.
5.8
Oil pre-heater
It must be installed so that there is no heat dissipation to the control cabinet.
To prevent a risk of accidents when venting due to discharging hot vapours and liquids,
the discharge lines from vent valves must be laid at least to floor plate height.
Discharge lines of safety valves must be laid so that there is no danger
of accident when the valve responds due to discharging liquid.
The discharge line must be laid so that it can always be observed. It must not
be concealed by pipes, valves or other units!
Westfalia Separator
45
2058-9601-020 / 0211
Steam traps
must be fitted horizontally between two unions.
should not be insulated to assure correct functioning.
must be installed so that no condensate accumulation can occur on the preheaters.
5.9
Installation examples
The following sections show installation examples for
Tubular heat exchanger
Steam-heated plate heat exchanger with (PI controlled) control valve
Steam-heated tubular heat exchanger with (PI controlled) control valve
Thermal oil-heated plate heat exchanger with (PI controlled) control valve
Thermal-oil-heated tubular heat exchanger with (PI controlled) control valve
5.9.1 Steam-heated plate heat exchanger with (PI controlled) control

valve
Fig. 40
A
B
C
D
Oil inlet
Oil outlet
Steam inlet
Condensate outlet
0.1
1.0
1.1
2.1
2.2
2.3
Spring safety valve

Plate heat exchanger
Resistance thermometer (PT 100)
Strainer
Motor control valve
Ball float condensate trap
Westfalia Separator
46
2058-9601-020 / 0211
5.9.2 Steam-heated tubular heat exchanger with (PI controlled) control

valve
Fig. 41
A
B
C
D
Oil inlet
Oil outlet
Steam inlet
Condensate outlet
0.1
1.0
1.1
2.1
2.2
2.3
Spring safety valve

Strainer
Motor control valve
Ball float condensate trap
Westfalia Separator
47
2058-9601-020 / 0211
5.9.3 Thermal oil-heated plate heat exchanger with (PI controlled) control
valve
Fig. 42
A
B
C
D
Oil inlet
Oil outlet
Thermal oil inlet
Thermal oil outlet
0.1
1.0
1.1
2.1
Spring safety valve

Plate heat exchanger
Motor control valve
Westfalia Separator
48
2058-9601-020 / 0211
5.9.4 Thermal-oil-heated tubular heat exchanger with (PI controlled)

control valve
Fig. 43
A
B
C
D
Oil inlet
Oil outlet
Thermal oil inlet
Thermal oil outlet
0.1
1.0
1.1
2.1
Spring safety valve

Motor control valve
Westfalia Separator
49
2058-9601-020 / 0211
5.10
Securing plate heat exchangers

Assembly instructions for soldered
plate heat exchanger
Prepare an assembly plate support
and weld it to the foundation.
Fasten assembly plate 50 with
screws 70 and nuts 80 to the assembly plate support.
The assembly plate must be installed vertically relative to the pipe
axis.
IMPORTANT:
Welding the assembly plate to the
support is not permitted.
Fasten heat exchanger with gaskets
40 counterflanges 30, lock washers
20 and screws 10 to the assembly
plate.
Attach the pipes to the counterflanges by tack-welding.
Dismantle the heat exchanger and
gaskets.
Completely weld the pipes to the
counterflanges.
Finally, re-assemble the parts as per
instruction.
Fig. 44
A
B
The illustrated channel steel must be provided by the shipyard.

GEA Westfalia Separator recommendation as example channel steel according to DIN1026-1-50.
IMPORTANT:
Distortion or warping or other stress of the soldered connection points must be
avoided!
Pipelines must be correspondingly arrested.
Pos./
type
10
20
30
40
50
70
80
Allen screw
Lock
washer
Groovefaced
flange
Gasket
Plate
Hex head
screw
Hexagon
nut
B 10
ISO 4762 M10 x 45

(16 x)
DIN127 B10
(16 x)
1 in SAE3000P
SI
(4 x)
32.92 x 3.53
(8 x)
352 x 125 x
12
(1 x)
ISO 4017 M12 x 40

(2 x)
ISO 3032 M12

(2 x)
B 45
ISO 4762 M12 x 55

(16 x)
DIN127 B12
(16 x)
2 in SAE3000P
SI
(4 x)
56.74 x 3.53
(8 x)
563 x 290 x
12
(1 x)
ISO 4017 M12 x 40

(2 x)
ISO 3032 M12

(2 x)
Westfalia Separator
50
2058-9601-020 / 0211
5.11
Safety valve
Safety valve in vertical fitting position
Fig. 45
The safety valve outlet should be led

via a funnel (pos. 1).
A discharge line is welded to the
funnel via which the medium can be
discharged.
IMPORTANT:
Do not use galvanized components and hoses.
Fig. 46
Westfalia Separator
51
2058-9601-020 / 0211
Solids tank
6.1
6.1.1
6.1.2
6.2
6.2.1
6.2.2
6.2.3
6.3
6.3.1
Recommended criteria for solids tank ................................................... 52

Tank vent ............................................................................................... 53
Set-up of the solids tank venting ........................................................... 54
Solids discharge lines ............................................................................ 55
Solids discharge lines with shut-off flap................................................. 56
Standard installation of shut-off flaps .................................................... 56
Installation recommendation for shut-off flaps ....................................... 57
Operating and dirty water discharge lines ............................................. 58
Separators of OSD and OSE ................................................................. 58
Westfalia Separator
52
2058-9601-020 / 0211
6.1
Recommended criteria for solids tank

Note:
This information does not apply to sludge transfer units on compact units.
There should always be separate solids tanks for the lube oil and fuel systems.
Tank heating should be installed in dependence of the viscosity or ambient
temperature.
The general designs and constructions are subject to the valid regulations.
1
2
3
4
Monitoring
Venting
Tank heating
Utilizable volume
Fig. 47
Minimum solids tank volume

Separator model
OSD 2
OSD 6
OSD 18
OSD 35
OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
Volume
[l]
Maximum utilizable volume

[%]
80
200
200
300
300
80
200
200
300
300
60
60
60
60
60
60
60
60
60
60
Westfalia Separator
53
2058-9601-020 / 0211
6.1.1 Tank vent

In the case of one or more separators which are connected to a solids tank,
the nominal widths DN to be used are given in the table below:
Note:
Connect the tank vent to the on-board venting system.
Separators
per solids tank
1
2
3
1
2
3
OSD 2
50
50
80
OSD 6
80
100
125
OSE 5
50
50
80
OSE 10
80
100
125
Tank vent
DN in mm
OSD 18 OSD 35
80
125
100
150
125
150
OSE 20
80
100
125
OSE 40
125
150
150
OSD 60
125
150
150
OSE 80
125
150
150
In the case of a combination of separator models on one solids tank

the total number of all separators must be taken as a basis
and the nominal width of the largest model used.
The following criteria must be taken into consideration when venting the tank:
Installation in accordance with the guidelines of the classification societies
Controlled discharge of oil vapours
An uncontrolled discharge of the sludge must be avoided.
The vent lines must be laid so that a chimney effect develops.
All possible loops in the vent lines must be stepwise.
Westfalia Separator
54
2058-9601-020 / 0211
6.1.2 Set-up of the solids tank venting

Solids tank with one separator
The nominal width DN is given in the
table above (section 6.1.1).
Fig. 48
Solids tank with several separators

The nominal width DN is given in the
table above (section 6.1.1).
Fig. 49
Solids tank with wash plates

A solids tank with wash plates is required when movements of the ship
cause faulty functioning of the level
monitoring.
When using wash plates, each section must be vented.
The vent lines must be brought together.
Fig. 50
Westfalia Separator
55
2058-9601-020 / 0211
6.2
Solids discharge lines
Fig. 51
The solids discharge lines should

always be vertical if possible.
The solids discharge must always
end 50 100 mm below the tank
top.
The maximum level in the solids
tank must be monitored by means of
a float switch.
The piping for the solids discharge
should be without reduction and with
vibration compensators.
The length of 2 m may not be exceeded without trace heating.
If there is a deviation from the vertical, an angle of 45 must not be exceeded.
Fig. 52
IMPORTANT:
This piping arrangement is not admissible!
Fig. 53
Westfalia Separator
56
2058-9601-020 / 0211
6.2.1 Solids discharge lines with shut-off flap

A shut-off flap in the solids discharge line prevents the penetration of vapours
into a stationary separator during the desludging of another separator.
If more than one separator is used for a sludge tank, a shut-off flap must be
installed in the sludge discharge at the shipyard.
Shut-off flaps are not included in the standard scope of supply of GEA Westfalia Separator but can be ordered from GEA Westfalia Separator.
CP units or modules equipped with a sludge tank supplied by GEA Westfalia
Separator and equipped with more than one separator are always delivered
with shut-off flaps.
6.2.2 Standard installation of shut-off flaps

Separators of OSD and OSE
Fig. 54
I
II
Solids discharge
Hood and frame drain
III
IV
Tank vent
Shut-off flap
Discharges I, and III must be configured as illustrated in Fig. 57.

See section 6.1.1, table for tank vent connection.
ATTENTION!
It must be ensured that the shut-off flaps are open during separator operation.
Westfalia Separator
57
2058-9601-020 / 0211
6.2.3 Installation recommendation for shut-off flaps

The solids discharge must always
end below the tank top.
For dimension X, see section 6.2,
Fig. 51.
I
II
III
IV
V
Shut-off flap
Flange
Pipe
Hose (supplied with separator)
Solids tank cover
Fig. 55
Fig. 56
Westfalia Separator
58
2058-9601-020 / 0211
6.3
Operating and dirty water discharge lines

The discharges for operating and dirty water can be conveyed into a separate
tank for oily water.
The piping for the operating and dirty water discharge should be vertical,
without reduction and with vibration compensators. There is no upper length
limit.
IMPORTANT:
Operating and dirty water discharges may not be discharged into public
canals, draining ditches and waters!
6.3.1 Separators of OSD, OSE and OTC

The water discharges must be submerged
under
all
conditions
(roll/pitch).
Dimension h is:
min. 50 mm for shipboard operation,
min. 20 mm for stationary plants.
I
II
III

Solids discharge
Tank vent
Fig. 57
When a siphon is installed, the

frame drain need not be submerged
below the minimum level because a
liquid seal is assured.
Dimension h1 is given in the table
below.
I
II
III
IV
Solids discharge
Tank vent
Siphon for hood and
frame drain
Fig. 58
Westfalia Separator
59
2058-9601-020 / 0211
Table for defining siphon length, dimension h1

Separator model
OSD 6 / OSD 18
OSD 35 / OSD 60
OSE 5
OSE 10
OSE 20
OSE 40
OSE 80
OTC 2
OTC 3
OTC 5
OTC 10
OTC 20
Siphon length [mm]

h1
500
800
500
500
500
800
800
Westfalia Separator
60
2058-9601-020 / 0211
Note
Notes
Notizen
Anotaciones

Muistiinpanot
Notater
Notes
Note
Westfalia Separator
61
2058-9601-020 / 0211
Electrical installation
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.2
7.3
7.3.1
7.3.2
7.3.3
7.4
7.5
7.6
7.6.1
7.6.2
7.6.3
7.6.4
7.6.5
7.7
7.8
Control cabinet ....................................................................................... 62

Electrical connection .............................................................................. 64
External voltages ................................................................................... 64
Shipboard operation .............................................................................. 65
Onshore operation ................................................................................. 65
Electro-magnetically compatible installation .......................................... 66
Valves .................................................................................................... 67
Solenoid valve block .............................................................................. 67
Terminal box .......................................................................................... 68
Separator with sensor bloc .................................................................... 69
Dual-purpose thermometer .................................................................... 70
Electrical installation of transmitters and electric motors ....................... 71
Electrical execution ................................................................................ 71
Earthing the separator ........................................................................... 72
Voltage equalisation of the separator .................................................... 72
Voltage equalization of the electric heater ............................................. 73
Voltage equalization of the foundation frame ........................................ 73
Voltage equalisation of the control cabinet ............................................ 74
Electric motors procured by the customer ............................................. 75
Installation and operation of control units .............................................. 76
Westfalia Separator
62
2058-9601-020 / 0211
7.1
Control cabinet
Control cabinet configuration
Fig. 59
Fig. 60
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Lock
Control Unit D10
OFF/ON keys for separator
OFF/ON keys for feed pump
HAND/0/AUTOMATIC selector for

solids pump (option)
Main switch
Front view
Interior view
Isolating amplifier for analog output (option)

WMS (Water Content Monitoring System) relay, if provided
Full-motor-protection module
Interface relay
Auxiliary contactor
Main contactor
Current transformer
Power supply for PLC (Programmable Logic Control) and valves
Terminal Strip
Control transformer for heating and venting facilities (option)
Main switch
Control voltage transformer (option)
Motor protection switch
Safety outcut
Westfalia Separator
63
2058-9601-020 / 0211
Mounting example
1
2
3
4
5
6
Gasket 10,5x23x5
Threaded bolt M 8 (embedded
in the wall)
Washer
Rear panel of control cabinet
Washer
Wall
Fig. 61
The control cabinet

must be allocated to the corresponding separator by means of its designation.
must be mounted on a frame or wall in the vicinity of the separator.
conforms to enclosure IP 54.
It must be possible to open the control cabinet door wide so that the door
latch can lock into place.
it can be easily operated and observed.
an ambient temperature of 50 C (122 F) is not exceeded. If necessary,
make sure there is an adequate supply of fresh air.
If the control cabinet is mounted on a wall, a wall clearance of 20 m must be
observed to achieve a vibration-free fastening arrangement.
Although buttons and switches and the electronic control unit are protected
against moisture by protective foil and door seal, the cabinet must nevertheless not be installed in an excessively humid environment or damp area.
To keep the temperature inside the unit constant after commissioning, the
main switch should be kept turned on even when the separator is at a standstill.
Westfalia Separator
64
2058-9601-020 / 0211
7.1.1 Electrical connection

The control unit is designed for a connected voltage as indicated on the
nameplate inside the control cabinet.
In the case of a version without motor starter, the rated connection voltage is
115 VAC or 230 VAC which must be protected by a 6 A slow-blow fuse.
7.1.2 External voltages

carry external voltage (even when the main switch is off!).
can be identified by the orange coloured wiring.
can be used in external control systems up to 250 VAC.
2
A cross-section of 1.5 mm Cu is adequate for all control and interlocking

lines.
The voltage-free contacts of the output modules
Westfalia Separator
65
2058-9601-020 / 0211
7.1.3 Shipboard operation

For shipboard operation
Only lines type "MGCH" according to DIN 89 158 may be used.
All cables must meet the flame test requirements for bunched cables acc.
to IEC 60332-3 / IEEE 45-18.13.
All cable materials must be free of halogens acc. to IEC 60754-1, no
toxicity acc. to 60754 and no corrosivity acc. to IEC 60754-2.
All cables must have an approval of the relevant classification society.
Insulating strength: 0.6/1KV
GEA WSPN Standard: Nexans MPRX 0.6/1kV
The standard control cabinets are equipped with plastic non halogen oil
resident. WS standart is Ernst Heinrich GmbH
load and control lines can be laid jointly without clearance
In the case of HFO separators in series operation, the signal exchange between the control cabinets as per the terminal diagram for the connecting cable must be taken into account (see section 7.2).
Cable glands for shipboard installation

Female
thread
M 16 x 1.5
M 20 x 1.5
M 25 x 1.5
M 32 x 1.5
M 40 x 1.5
Cable outer
Cable gland
[mm]
4 11
8 13
11 17
15 21
19 28
Earthing device +
Inner parts design
M 24 x 1.5
M 24 x 1.5
M 36 x 1.5
M 36 x 1.5
M 36 x 1.5
7.1.4 Onshore operation

The local rules and regulations of the operator must be observed!
for onshore operation
Normally, "lflex" cables are used and "NSSHU" for outside installation.
commercially available cable glands can be used.
separate cable routing must be used for the load and control lines.
Cable entries with plastic or metal glands are admissible.
Westfalia Separator
66
2058-9601-020 / 0211
7.2
Electro-magnetically compatible installation

The control cabinet is designed to be electro-magnetically compatible.
The following must be taken into account with electro-magnetically compatible
installations:
Earthing straps
Voltage equalization
Screening lines
Separate line routing
Use of erase elements in case of inductance.
In the case of HFO series operation, proceed in accordance with the following
wiring diagram:
Fig. 62
A Switch ON
B Control cabinet HFO No. 1
C Control cabinet HFO No. 2
D Connecting terminals
F Cable type
E Customer shipboard installation
IMPORTANT:
Use only data cable UNITRONIC-BUS-FD P L2/F.I.P (1 x 2 x 0.25 mm +
Screen).
Do not lay data cables directly next to load cables as this can cause problems with electromagnetic compatibility.
Pay attention to the different software status on the C7 units:
1. unit has the MPI addresses 1 / 2
Faulty or broken cable connections are displayed with error code no. 551.
Check all connections.
Westfalia Separator
67
2058-9601-020 / 0211
7.3
Valves
Only original valves from GEA Westfalia Separator with integrated suppressor
diode and reverse battery protection in the connection head may be used in
filling, displacement and operating water lines.
7.3.1 Solenoid valve block

This diagram shows an original valve
block from GEA Westfalia Separator
which is used in filling, displacement
and operating water lines.
Fig. 63
Connections
A
B
C
D
Connecting terminal + 24 V DC
Connecting terminal + 0 V DC
Earth
Status LED
Fig. 64
Westfalia Separator
68
2058-9601-020 / 0211
7.3.2 Terminal box

All valves and monitoring instruments
are installed ready-to-connect on a
local terminal box at the separator.
The connection to the control cabinet must be carried out by means of
a joint cable in accordance with the
adjacent connection diagram.
A
B
C
D
E
F
G
H
I
J
K
Control cabinet
Product discharge pressure
Self-Think system
Water sensor
Circuit valve
Water discharge valve
Filling, displacement water valve
Operating water valve
Circulation valve
Operating Water
Filling, displacement water
Fig. 65
Westfalia Separator
69
2058-9601-020 / 0211
7.3.3 Separator with sensor bloc
Fig. 66
The components on the hood are wired to the terminal box.
Westfalia Separator
70
2058-9601-020 / 0211
7.4
Dual-purpose thermometer
The dual-purpose thermometer is used
to monitor the temperature of the dirty oil after the pre-heater and
for local temperature indication.
ATTENTION!
The dual-purpose thermometer is used only in conjunction with a C7 control
system.
Fig. 67
Fig. 68
The dual-purpose thermometer must always be fitted before the 3-way piston
control valve.
All sensors must be installed so that they are continuously flushed with oil.
Westfalia Separator
71
2058-9601-020 / 0211
7.5
Electrical installation of transmitters and electric motors

The connection of motors and transmitters by means of cable loop enables
easy replacement and function testing of the components.
Example 1
Fig. 69
Example 2
Fig. 70
7.6
Electrical execution
The electrical execution must be in accordance with the following standards and
recommendations in so far as specifications and standards issued by the classification societies do not have to be met.
The applicable standards at GEA Westfalia Separator are
the European standard EN 60 204 Part 1 or
VDE 0113 Part 1
Westfalia Separator
72
2058-9601-020 / 0211
7.6.1 Earthing the separator

The separator
earthed.
must
always
be
The earthing connection A is always

located on the motor side beneath the
motor flange.
Fig. 71
7.6.2 Voltage equalisation of the separator

Including the insulated installed separator in the voltage equalisation of the
installation is done via the voltage
equalisation connection on the motor
side. This applies always.
Fig. 72
If there is no protective conductor in

multi-core cables and leads (e.g. in the
armoured marine cable), the drive
motor must likewise be included in the
voltage equalisation.
The same applies for pump motors
and electric pre-heaters.
The cross-section of the voltage
equalisation conductor, normally insulated green-yellow, is dimensioned to
the largest external conductor on the
respective consumer.
In practice, table 1 in EN 60204-1 is
used for this.
GEA Westfalia Separator selects:
2
2
10 mm < S < 25 mm Cu
Fig. 73
Westfalia Separator
73
2058-9601-020 / 0211
7.6.3 Voltage equalization of the electric heater
Fig. 74
7.6.4 Voltage equalization of the foundation frame

The foundation frame must be fitted
with a marked connecting bolt for
voltage equalisation by the customer.
Fig. 75
Fig. 76
Westfalia Separator
74
2058-9601-020 / 0211
7.6.5 Voltage equalisation of the control cabinet

The connection is via the PE-bar or terminal inside the cabinet to the frame
connection.
PE connection
Fig. 77
PE connection
Fig. 78
PE connection
Fig. 79
Westfalia Separator
75
2058-9601-020 / 0211
7.7
Electric motors procured by the customer

When the motors are procured by the customer, they must have the following
specifications and comply with the following standards:
Design
IM B5* according to IEC 34 Part 7
Rating
Classification according to IEC 72 Part 2
Enclosure
IM B5 according to IEC 34 Part 5
Vibration severity
Synchronous speed
Quality stage N * / S *according to IEC 34 Part

14,
Full key balanced * / Half key balanced *
50 Hz
60 Hz
3000 * / 1500 *
3600 * / 1800 *
Type of cooling
1C411 according to IEC 34 Part 6
Flange dimensions
according to IEC 72
Shaft dimensions
according to IEC 72
Direction of rotation
according to IEC 34 Part 8
Insulation material class
F according to IEC 34 Part 1

PTC thermistors as full motor protection
Motor protection
Operating mode
The PTC resistors mist be fitted in the end

windings one per strand.
PTC resistors temperature feelers which are
mounted on the winding package from the
outside are not acceptable!
SI according to IEC 34 Part 1
* dependent on separator model
ATTENTION!
Consequential damage on the separator caused by motors procured by
the customer cannot be accepted as a warranty claim by GEA Westfalia
Separator.
Westfalia Separator
76
2058-9601-020 / 0211
7.8
Installation and operation of control units

IMPORTANT:
the control unit is not exposed to dust and aggressive atmosphere.
the control unit is not installed in an excessively humid environment or
damp area.
the sun cannot shine on the control panel or displays making operation and
observation more difficult.
heating up of the control unit is avoided.
Where appropriate, check screw-type and plug-type connectors for secure
contact.
Connect thermostatically controlled cabinet heating to external voltage and
switch it on.
The control cabinet heating must switch on before the temperature drops below the dew point.
Bedewing can occur during the night which is not good for electronic apparatus.
Check that the line voltage and frequency conform to the connection data of
the control unit (see nameplate).
Pay attention to admissible installation and operating data:
Voltage fluctuations
Frequency fluctuations
Ambient temperatures
Atmospheric humidity
Installation height
Transport temperatures

+ 5 to + 45 C (41 to 113 F)
max. 50 % at 40 C (104 F)
max. 90 % at 20 C (68 F)
above sea level up to 1000 m
25 to + 55 C (13 to 131 F)
ATTENTION!
Improper installation and operation discharges the supplier from the warranty obligation.
Westfalia Separator
77
2058-9601-020 / 0211
Note
Notes
Notizen
Anotaciones

Muistiinpanot
Notater
Notes
Note
Westfalia Separator
78
2058-9601-020 / 0211
Note
Notes
Notizen
Anotaciones

Muistiinpanot
Notater
Notes
Note
Westfalia Separator
2058-9601-020 / 0211
79
Westfalia Separator
GEA Mechanical Equipment
GEA Westfalia Separator Group GmbH

Werner-Habig-Str. 1, 59302 Oelde (Germany)
Phone +49 2522 77-0, Fax +49 2522 77-2488
ws.info@geagroup.com, www.westfalia-separator.com
Contents
2.
HFO
Data sheet
P&ID
Equipment list
Dimensioned drawing
Detail drawings:
2063-4100-000
3/2-Way feed valve
9901-8105-390
Dimensioned drawing for motor
9901-8105-305
Starting characteristics
9997-0142-020
Circuit diagram
8106-2004-058
Commissioning equipment, spare parts and tools list
GEA Westfalia Separator Systems GmbH
Process Condition Data Sheet

Manufacurer:
Customer:
Hull No.:
Classification:
DSME
43223
44608
ABS
Project No.:
Oil to be Processed
Application:
Viscosity:
Density:
Inlet Temperature:
Separating Temperature:
Effec.throughput capacity:
Ambient Conditions
Ambient Temperature:
Humidity:
Atmospheric Pressure:
Separator
Type:
Operation Mode:
Ejection Method:
Clean Oil Discharge:
Finish color:
Total weight:
Bowl speed
Bowl weight
Control Unit
Type:
Infeed voltage:
Frequency:
Valve Voltage:
Control Voltage:
Finish Color:
Weight:
Rev. No. 0
HFO
H1195
H1196
600
1,01
60
98
4.500
mm /s 50C
g/ml 15C
C
C
l/h
IMO No.:
WS Order No:
Drawing No.:
P452946646-9913-PDS000
Operating Water
Hardness:
Chloride Ions:
PH - Value:
Temperature:
Feed Pressure:
Required Capacity:
Consumption / Ejection:
45 C
up to 92%
up to 1000 m Above Sea Level
2 x OSE 40-0136-067/30
total
1,5
Munsell 7.5 BG 7/2
1600
8200
255
D 10
440
60
24
230
Munsell 7.5 BG 7/2
55
bar g
kg
rpm
kg
Volt
Hz
DC
Volt
kg
< 55C 12 dH
> 55C 6 dH
< 100 mg/l
6,5 - 7,5
+10C up to +85C
3-10 bar (min.3bar)
0,5 l/s
3-4 l
Compressed Air
Pressure:
7
Standard operating compressed air
Min. 3 bar / max. 10 bar
Separator Motor
Type:
Frame size 160
Voltage:
440
Frequency:
60
Output:
17,5
Speed:
3600
Weight:
107
Feed Pump
Type:
Rated Capacity:
Suction Height:
Delivery Height:
Voltage:
Frequency:
Output:
Weight:
Set Points
bar
Volt
Hz
kW
rpm
kg
l/h
m Ws
m Ws
440 Volt
60 Hz
kW
kg
Adjustment
Inlet Temperature Controler TC
ID No.
*0-9-007
Inlet Temperature Alarm high TAH
*0-9-006
108 C
Inlet Temperature Alarm low TAL
*0-9-006
88 C
Water Pressure Reducer PCV
*9-7-003
3 -10 bar g
Pressure Alarm low PAL Clean Oil Discharge
*1-9-002
1 bar
Pressure Switch PSL Sludge Monitoring System
*1-9-003
1 bar for -91-/0136 0,5 bar for -0196-
Subject to technical modification
452946646
452946721
98 C
12.10.2010
Customer: DSME
Project-/Order-No.:
43223 / 402946646
Location:
Project-title:
2XOSE 40-0136
H1195/H1196
GEA Westfalia Separator
Equipment List
Order-No.:
402946646
Project - title:
2XOSE 40-0136
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Date: 12.10.2010
Dept.: 4420
Type: OSE 40
Corr. Drawing: P402946646-9913-PID000
Belongs to:
Repl for: ---
Repl. by: ---
Std. checked: ---
Explanations:
Priority(A):
Procurement (B):
Scope of supply (C):
N = Obligatory
E = Recommended
P = Possible
U = ---
M = Must be obtained from Westfalia

K = May be obtained from Westfalia
Z = Supplied by client
V = ---
L = Scope of supply by WS
S = Supplied by client
F = to be removed
W = loose supply
Created Date: 04.10.2010
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P402946646-9913-DVL000
4110-NIE
Copyright. All rights reserved
Revison:
Page:
1/5
Customer: DSME
Project-/Order-No.:
43223 / 402946646
Location:
Project-title:
2XOSE 40-0136
H1195/H1196
Equipment List
ID
Quantity
Description
Usage
Size/Type
Nominal Bore
10-1-001
1 Stck
Separator
10-1-001/M1
1 Stck
Motor
10-7-005
1 Stck
Throttle Valve
Power
Part-No.
OSE 40-0136-067
Frame size 160
belongs to 10-7-006
0018-8091-110
Comments
PID Code
DN50
10-7-006
1 Stck
3/2-Way Feed Valve Assembly

DN50
10-7-010
1 Stck
2/2 Way Solenoid Valve
0331
0018-8133-600
10-7-011
1 Stck
0331
0018-8133-600
10-7-012
1 Stck
Pressure Gauge Cock
belongs to 10-1-001
TE
belongs to 10-7-006
1/4"
10-9-006
1 Stck
Resistance Thermometer
10-9-009
1 Stck
Flow Sensor
FI
0001-1701-600
10-9-010
1 Stck
TE
installed in Motor
10-9-011
1 Stck
Current Transformer
TAI 233
IAL
0005-0924-220
10-9-013
1 Stck
Water Detector
SK1-HT125-HFO
CS
0005-1464-050
10-9-014
1 Stck
Pressure Transmitter
NAE
1/4"
PT
0005-1529-300
10-9-018
1 Stck
Proximity sensor
SIS
0005-0868-000
11-7-001
1 Stck
Non-Return Valve
0018-2992-650
2 x PT 100
1/2"
1 1/2"
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P402946646-9913-DVL000
4110-NIE
Revison:
Page:
2/5
Customer: DSME
Project-/Order-No.:
43223 / 402946646
Location:
Project-title:
2XOSE 40-0136
H1195/H1196
Equipment List
ID
Quantity
Description
Usage
11-7-003
1 Stck
Pressure Gauge Cock
Size/Type
Nominal Bore
Power
Part-No.
belongs to 10-1-001
Comments
PID Code
1/4"
11-9-001
1 Stck
Pressure Gauge
213.40 / 0..40bar
1/4"
PI
0001-1572-600
11-9-002
1 Stck
NAE
1/4"
PT
0005-1529-300
12-7-001
1 Stck
Non-Return Flap
belongs to 10-7-006
belongs to 10-7-006
0018-1763-630/belongs
to 19-7-003
0018-7614-000
belongs to 19-7-003
belongs to 19-7-004
belongs to 19-7-005
0001-1572-600/belongs
to 19-7-003
L
L
DN 50
18-7-002
1 Stck
Solenoid Valve
1/4"
19-7-002
1 Stck
Ball Valve
3/4"
19-7-003
1 Stck
Solenoid Valve Assembly compl.

3/4"
19-7-004
1 Stck
2/2-Way Solenoid Valve

1/2"
19-7-005
1 Stck

1/4"
19-8-001
1 Stck
Y-Strainer
3/4"
19-9-001
1 Stck
Pressure Gauge
213.40 / 0..10bar
PI
20-1-001
1 Stck
Separator
OSE 40-0136-067
20-1-001/M1
1 Stck
Motor
Frame size 160
20-7-005
1 Stck
Throttle Valve
belongs to 10-7-006
0018-8091-110
DN50
20-7-006
1 Stck

DN50
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P402946646-9913-DVL000
4110-NIE
Revison:
Page:
3/5
Customer: DSME
Project-/Order-No.:
43223 / 402946646
Location:
Project-title:
2XOSE 40-0136
H1195/H1196
Equipment List
ID
Quantity
Description
Usage
Size/Type
Nominal Bore
20-7-010
1 Stck
20-7-011
1 Stck
20-7-012
1 Stck
Pressure Gauge Cock
Power
Part-No.
0331
0018-8133-600
0331
0018-8133-600
belongs to 10-1-001
TE
belongs to 10-7-006
Comments
PID Code
1/4"
20-9-006
1 Stck
20-9-009
1 Stck
Flow Sensor
FI
0001-1701-600
20-9-010
1 Stck
TE
installed in Motor
20-9-011
1 Stck
Current Transformer
TAI 233
IAL
0005-0924-220
20-9-013
1 Stck
Water Detector
SK1-HT125-HFO
CS
0005-1464-050
20-9-014
1 Stck
NAE
1/4"
PT
0005-1529-300
20-9-018
1 Stck
Proximity sensor
SIS
0005-0868-000
21-7-001
1 Stck
Non-Return Valve
0018-2992-650
belongs to 10-1-001
2 x PT 100
1/2"
1 1/2"
21-7-003
1 Stck
Pressure Gauge Cock

1/4"
21-9-001
1 Stck
Pressure Gauge
213.40 / 0..40bar
1/4"
PI
0001-1572-600
21-9-002
1 Stck
NAE
1/4"
PT
0005-1529-300
22-7-001
1 Stck
Non-Return Flap
belongs to 10-7-006
DN 50
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P402946646-9913-DVL000
4110-NIE
Revison:
Page:
4/5
Customer: DSME
Project-/Order-No.:
43223 / 402946646
Location:
Project-title:
2XOSE 40-0136
H1195/H1196
Equipment List
ID
Quantity
Description
Usage
28-7-002
1 Stck
Solenoid Valve
Size/Type
Nominal Bore
Power
Part-No.
belongs to 10-7-006
0018-1763-630/belongs
to 19-7-003
0018-7614-000
belongs to 19-7-003
belongs to 19-7-004
belongs to 19-7-005
0001-1572-600/belongs
to 19-7-003
Comments
PID Code
1/4"
29-7-002
1 Stck
Ball Valve
3/4"
29-7-003
1 Stck

3/4"
29-7-004
1 Stck

1/2"
29-7-005
1 Stck

1/4"
29-8-001
1 Stck
Y-Strainer
3/4"
29-9-001
1 Stck
Pressure Gauge
213.40 / 0..10bar
PI
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P402946646-9913-DVL000
4110-NIE
Revison:
Page:
5/5

Werner-Habig-Str. 1 - 59302 Oelde ( Germany ) - Phone +49 2522 77-0
Kunde
Customer
: -
Anlagenbezeichnung
Designation of plant
: -
Zeichnungsnummer
Drawing no.
: 8106-2004-058
Kommission
Internal order no.
: -
Hersteller (Firma)
Manufacturer (Company)
: GEA Westfalia Separator
Projektname
Name of project
: -
Typ
Type
: D10 / OSE 40-0136
Sprache
Language
: de/en
Technische Daten
Technical data
: 230V AC
Erstellt am
Prepared
: 07.10.2010
GEA Projektsachbearbeiter : M. Kalb

GEA project contact
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
60 Hz
Bearbeitet am
Processed
: 04.03.2011
Telefon
Telephone
: +49 2522 77-2802
GEA Westfalia
Separator
This document is COPYRIGHTED by GEA Westfalia Separator Group GmbH. All rights being reserved.
+/-5 %
Benennung/Description:
Titel- / Deckblatt
Title- / cover sheet
Angewandte Normen:
Applied standards:
Rev.01 =
As built +
Sprache:
Language:
IEC 61346
IEC 61355
IEC 60617
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EAA
Bl./Sh.
1
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EAA
Titel- / Deckblatt
03.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
03.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
03.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
03.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
03.03.2011
GRO/PLE
&EBH
Revisionsbersicht
Revision overview
03.03.2011
GRO/PLE
&EDB
Strukturkennzeichenbersicht
Structure indicator
03.03.2011
GRO/PLE
&EDB
Informations-Blatt
Information-sheet
03.03.2011
GRO/PLE
&EDB
Informations-Blatt
Information-sheet
03.03.2011
GRO/PLE
&EFS
10
Einspeisung
Incoming
=0
03.03.2011
GRO/PLE
&EFS
11
Steuerspannung 24VDC
Control voltage 24VDC
=0
03.03.2011
GRO/PLE
&EFS
12
Not-Halt
Emergency stop
=0
03.03.2011
GRO/PLE
&EFS
13
Separator
Separator
=01
03.03.2011
GRO/PLE
&EFS
14
Separator
Separator
=01
03.03.2011
GRO/PLE
&EFS
15
Separator Drehzahlmessung
Separator speed measuring
=01
03.03.2011
GRO/PLE
&EFS
16
Separator Signale
Separator signals
=01
03.03.2011
GRO/PLE
&EFS
17
Separator Vibro
Separator vibro
=01
03.03.2011
GRO/PLE
&EFS
18
Separator Ventile
Separator valves
=01
03.03.2011
GRO/PLE
&EFS
19
Freigabe Produkt Temperaturregelung

Release product temperature control
=11
03.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EAB
Bl./Sh.
2
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EFS
20
Produkt Temperaturregelung
Product temperature control
=11
03.03.2011
GRO/PLE
&EFS
21
Signalaustausch
Signal exchange
=100
03.03.2011
GRO/PLE
&EFS
22
SPS bersicht
PLC overview
=00
03.03.2011
GRO/PLE
&EFS
23
SPS Spannungsversorgung
PLC power supply
=00
03.03.2011
GRO/PLE
&EFS
24
SPS bersicht
PLC overview
=00
03.03.2011
GRO/PLE
&EFS
25
SPS bersicht
PLC overview
=00
03.03.2011
GRO/PLE
&EFS
26
SPS bersicht
PLC overview
=00
03.03.2011
GRO/PLE
&ELU
27
Aufbauplan
Arrangement drawing
03.03.2011
GRO/PLE
&ELU
28
Aufbauplan
Arrangement drawing
03.03.2011
GRO/PLE
&ELU
29
D10
D10
03.03.2011
GRO/PLE
&ELU
30
Not-Halt-Box
Energency stop box
03.03.2011
GRO/PLE
&ELU
31
Stromwandler
Current transformer
03.03.2011
GRO/PLE
&ELU
32
Motorvollschutzrelais
Motor protection relay
03.03.2011
GRO/PLE
&EMA
33
Klemmenplan =0+-GLAND
Terminal connection diagram =0+-GLAND
=0
03.03.2011
GRO/PLE
&EMA
34
=0
03.03.2011
GRO/PLE
&EMA
35
Klemmenplan =0+-24M
Terminal connection diagram =0+-24M
=0
03.03.2011
GRO/PLE
&EMA
36
Klemmenplan =0+-PE
Terminal connection diagram =0+-PE
=0
03.03.2011
GRO/PLE
&EMA
37
Klemmenplan =0+-SC
Terminal connection diagram =0+-SC
=0
03.03.2011
GRO/PLE
&EMA
38
Klemmenplan =0+-X1
Terminal connection diagram =0+-X1
=0
03.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EAB
Bl./Sh.
3
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EMA
39
Klemmenplan =0+-X2
=0
03.03.2011
GRO/PLE
&EMA
40
Klemmenplan =01+-X1
=01
03.03.2011
GRO/PLE
&EMA
41
Klemmenplan =01+-X2
=01
03.03.2011
GRO/PLE
&EMA
42
Klemmenplan =01+JB-1X10
Terminal connection diagram =01+JB-1X10
=01
+JB
03.03.2011
GRO/PLE
&EMA
43
Klemmenplan =01+JB-1X10_GLAND
Terminal connection diagram =01+JB-1X10_GLAND
=01
+JB
03.03.2011
GRO/PLE
&EMA
44
Klemmenplan =01+SB-1X20
Terminal connection diagram =01+SB-1X20
=01
+SB
03.03.2011
GRO/PLE
&EMA
45
Klemmenplan =100+-X2
=100
03.03.2011
GRO/PLE
&EMA
46
Klemmenplan =11+-X2
=11
03.03.2011
GRO/PLE
&EMB
47
Kabelbersicht
Cable layout
03.03.2011
GRO/PLE
&EMB
48
Kabelbersicht
Cable layout
03.03.2011
GRO/PLE
&EMB
49
Klemmenkasten bersicht
Terminal box overview
03.03.2011
GRO/PLE
&EMB
50
Hinweise zur Installation

Instructions for installation
03.03.2011
GRO/PLE
&EMB
51
Potentialausgleich Separator
Potential equalization Separator
03.03.2011
GRO/PLE
&EMC
52
Klemmenanschlussplan =0+-GLAND
Terminal connecting plan =0+-GLAND
03.03.2011
GRO/PLE
&EMC
53
Klemmenanschlussplan =0+-24M
Terminal connecting plan =0+-24M
03.03.2011
GRO/PLE
&EMC
54
Klemmenanschlussplan =0+-PE
Terminal connecting plan =0+-PE
03.03.2011
GRO/PLE
&EMC
55
Klemmenanschlussplan =0+-SC
Terminal connecting plan =0+-SC
03.03.2011
GRO/PLE
&EMC
56
Klemmenanschlussplan =0+-X1
Terminal connecting plan =0+-X1
03.03.2011
GRO/PLE
&EMC
57
03.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EAB
Bl./Sh.
4
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EMC
58
03.03.2011
GRO/PLE
&EMC
59
03.03.2011
GRO/PLE
&EMC
60
Klemmenanschlussplan =01+JB-1X10
Terminal connecting plan =01+JB-1X10
03.03.2011
GRO/PLE
&EMC
61
Klemmenanschlussplan =01+JB-1X10_GLAND
Terminal connecting plan =01+JB-1X10_GLAND
03.03.2011
GRO/PLE
&EMC
62
Klemmenanschlussplan =01+SB-1X20
Terminal connecting plan =01+SB-1X20
03.03.2011
GRO/PLE
&EMC
63
03.03.2011
GRO/PLE
&EMC
64
03.03.2011
GRO/PLE
&EPB
65
Stckliste
Parts list
03.03.2011
GRO/PLE
&EPB
66
Stckliste
Parts list
03.03.2011
GRO/PLE
&EPB
67
Stckliste
Parts list
03.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EAB
Bl./Sh.
5
67 Bl./Sh.
Revisionsbersicht
Revision overview
Revisionsname
Revision name
Revisionskommentar
Revision comment
Rev.01
As built
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Revisionsnderungsgrund
Revision on the basis of change
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Revisionsbersicht
Revision overview
Seitenname
Page name
Ersteller
Author
Datum
Date
GRO/PLE
03.02.2011
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EBH
Bl./Sh.
6
67 Bl./Sh.
Structure indicator
Vollstndige Bezeichnung
Complete name
&EAA
Dokumentenart
&EAB
Dokumentenart
&EBH
Dokumentenart
&EDB
Dokumentenart
&EFS
Dokumentenart
&ELU
Dokumentenart
&EMA
Dokumentenart
&EMB
Dokumentenart
&EMC
Dokumentenart
&EPB
Dokumentenart
=0
Anlage
=00
Anlage
=01
Anlage
=100
Anlage
=11
Anlage
=Additions
Anlage
=Customer
Anlage
=MCC
Anlage
+JB
Einbauort
+L
Einbauort
+SB
Einbauort
Date
Editor
Tested
Changes
Beschriftung
Labelling
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Strukturbeschreibung
Structure descprition
Complete name
Beschriftung
Labelling
Deckblatt
Cover sheet
Inhaltsverzeichnis
Table of contents
Revisionsbersicht
Revision overview
Strukturkennzeichen bersicht / Vorschriften
Structure indentification overview / instructions
Stromlaufplan
Circuit diagram
Aufbauplan
Arrangement drawing
Klemmenplan
Terminal connection diagram
Kabelbersicht
Cable layout
Klemmenanschlussplan
Terminal connecting plan
Stckliste
Parts list
Einspeisung
Incoming
SPS
PLC
Separator
Separator
Signalaustausch
Signal exchange
Zulaufpumpe
Feed pump
Zugabe
Addition
Kunde
Customer
Motorsteuerung
Motor starter
Abzweigdose
Junction box
Lokal
Local
Sensorblock
Sensor bloc
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Structure indicator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EDB
Bl./Sh.
7
67 Bl./Sh.
Vorschriften / Spezifikation
Instruction / specification
Schaltschrank :
Control cabinet :
Bezeichnung Schaltschrank
Name control cabinet
Ausfhrung:
Version:
CC
Aderkennzeichnung
Core indentification
YES
Lackierung Gehuse
Painting cabinet
Munsell 7.5 BG 7/2
Potentialbezeichnung
Potential designation
NO
Schutzart
Protective rating
IP54
Halogenfreie Verdrahtung / Kanle

Halogen free wiring / channels
YES
Umgebungstemperatur
Ambient temperature
~45 C
Kabelkennzeichnungsschilder
Cable marking plates
YES
Klassifizierung
Classification
...
Kennzeichnungsschilder
Marking plates
PLASTIC WHITE, LETTERS BLACK
Schnittstelle:
Interface:
Bus Verbindung zum Kunden PLC
Bus connection to customer PLC
NO
Einspeisung:
Incoming:
Netz-/ Anschlussspannung
Mains- / side voltage
230V AC
Netzfrequenz
Mains frequency
60 Hz
Drehfeld
Rotary field
CLOCKWISE ROTATION
Spannungstoleranz
Voltage tolerance
+/-5 %
Kabeleinfhrung
Cable inlet
BOTTOM
Einspeisung redundant
Incoming redundant
NO
Steuerspannungen:
Control voltages:
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Steuerspannung 1
Control voltage 1
230V AC
Steuerspannung 2
Control voltage 2
24V DC
Informations-Blatt
Information-sheet
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EDB
Bl./Sh.
8
67 Bl./Sh.
Verdrahtung
Wiring
Stromkreise
Electrical circuits
Leiter
Conductor
Hauptstromkreise
Main circuits
230V AC
L1
L2
L3
N
PE
Farbe
Colour
Schwarz
Black
Schwarz
Black
Schwarz
Black
Hellblau
Light blue
Grn / Gelb
Green / yellow
Querschnitt
Cross-section
Stromkreise
Electrical circuits
Steuerspannung
Control voltage
1,5mm
Leiter
Conductor
Farbe
Colour
Rot
Red
Rot / Wei
Red / white
Querschnitt
Cross-section
Rot
Red
Blau
Blue
Wei
White
Braun
Brown
Messleitung
Measuring circuit
Wei
White
0,75mm
Stromwandlerleitungen
Current transformer lines
Schwarz
Black
2,5mm
Verriegelungsleitungen (AC/DC)
Interlocking conductors (AC/DC)
Orange
0,75mm
230V AC
L
N
"
1,5mm
2,5mm
24V DC
+
-
Analog abgeschirmt
Analog screened
L+
M
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
0,75mm
"
"
Steuerspannung
Control voltage
Date
Editor
Tested
GEA Westfalia
Separator
Informations-Blatt
Information-sheet
"
0,75mm
"
Rev.01 =
As built +
Sprache:
Language:
0,75mm
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EDB
Bl./Sh.
9
67 Bl./Sh.
23
31
24
/21.1 32
13
230V AC
L1 / 11.0
N / 11.0
14
-S1
-F1
C 6A
Daten Einspeisung:
Data incoming:
-WD001
MPRXCX
2x2,5 mm
Date
Editor
Tested
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Filterlfter
Filter fan
GEA Westfalia
Separator
Umgebungstemperatur:
Ambient temperature:
~45 C
50 m
PE
PE
PE
-1M
-1T
-1G
U:
Einspeisung
Incoming
230V AC
60 Hz
f:
P:
Erdung Gehuse 1
Earthing cabinet 1
PE
M
1~
Erdung Tr 1
Earthing door 1
Einspeisung
Incoming
max. Kabellnge:
Max. Cable length:
Erdung Montageplatte 1
Earthing mounting plate 1
Erdung Schirm
Earthing screen
=Customer
+L-X
Vorsicherung:
Pre-fuse:
L
N
L1
PE
19/18W
Schaltschranklfter
Cabinet fan
2,5 mm
-PE
-PE
-M1
Changes
-PE
-X1
-PE
4
-SC
3
-PE
GLAND
-X1
-PE
min. Querschnitt:
Min. Cross-section:
Icn:
Vollaststrom:
Full load current:
Rev.01 = 0
As built +
Sprache:
Language:
~2 A
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
10
67 Bl./Sh.
N/L2
230V AC
L1
10.9 / L1
10.9 / N
-T2
INPUT
GEA
power
-P1
x2
ON
OFF
x1
120/230VAC
24VDC/5A
A
B
M'
PE
L+'
L+
OUTPUT
M.A / 13.6
M.K / 22.0
M.R / 12.0
1
-24M
-PE
-PE
M.X / 18.0
24V DC
24V DC
24V DC
Steuerspannung DC
Control voltage DC
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
L+.A / 13.6
L+.K / 23.0
L+.X / 12.0
Spannungsversorgung
Power supply
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
11
67 Bl./Sh.
24V DC
11.9 / L+.X
24V DC
L+.X / 16.0
=00-K1
/24.4
E2.7
8
X10
11.9 / M.R
M.R / 14.0
GLAND
-X2
-PE
Brcke entfernen bei

Anschlu eines
externen Not-Halt!
Remove link in case of
an external
emergency stop!
-WG008
MPRXCX
2x1,5 mm
=MCC
PE
/13.0
PE
Separator
Not-Halt
Separator
emergency stop
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Not-Halt
Emergency stop
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
12
67 Bl./Sh.
Separatormotor
Separator motor
11.9 / L+.A
11.9 / M.A
24V DC
24V DC
L+.A / 14.0
M.A / 15.0
=MCC
/12.1
/14.1
/19.1
Strommessung Separator
Current measuring separator
...V/50/60Hz
L1
L2
L3
=00-K1
4-20mA = 0-50A
/25.5
-WG006
MPRXCX
2x1,5 mm
AI0-I
X13
2
11
-X2
-X2
1
A1
A2
14
2
GLAND
-PE
PE
12
-K1
/14.4
-Q1
-X1
8
output
0/4-20mA
A1
T1
input
0-1A
GLAND
-PE
PE
7+
-X1
9-
0-.../.../1A
S2
50/1A
*0_9_011
S1
-B1
-T1
-WG007
MPRXCX
2x2,5 mm
-B2
-F1
A2
T2
-PE
M
3~
*0_1_001
...kW/...A
T1
T2
Separator
Separator
Date
Editor
Tested
Changes
Date
Name
PE
W1
V1
Linkslauf
Anti-clockwise rotation
U1
GEA_Westfalia_Separator
03.03.2011
BEE/PLE
03.02.2011 KA
PTC-Fhler
Separator
PTC-feeler
separator
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Separator
Separator
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
13
67 Bl./Sh.
13.9 / L+.A
24V DC
24V DC
=00-K1
L+.A / 15.0
=00-K1
/24.5
/24.5
E0.0
E0.1
2
X11
X11
=00-K1
/25.4
A1.0
A1
X12
A2
-K1
12.9 / M.R
M.R / 19.0
-X2
WG009 / 16.2
GLAND
21
20
-PE
WG009. / 16.3
-WG009
MPRXCX
4x1,5 mm
=MCC
14
11 /13.5
/13.0
PE
12
PE
Separator
Betrieb
Separator
operation
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Separator
Strung
Separator
failure
Kunde:
Customer:
Projekt:
Project:
Separator
Start/Stop
Separator
start/stop
GEA Westfalia
Separator
Separator
Separator
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
14
67 Bl./Sh.
14.9 / L+.A
13.9 / M.A
24V DC
24V DC
L+.A / 22.0
=00-K1
0-8200 r.p.m.
/24.5
E0.3
4+
X11
24VDC
-X2
2-
1+
5+
6-
-T2
-WG004
MPRXCX
7x1,5 mm
+JB
-1X10
*0_9_020
SI
-WG101
.-O
2x0,34 mm
+ BN = brown
- BU = blue
Drehzahlberwachung
Speed monitoring device
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
15
67 Bl./Sh.
=00-K1
=00-K1
4-20mA
/25.5
4-20mA
/25.5
AI1-I
AI2-I
X13
=00-K1
X13
/24.5
E0.5
6
X11
24V DC
12.9 / L+.X
24V DC
L+.X / 19.0
14.1 / WG009
-WG004
MPRXCX
7x1,5 mm
GLAND
10
-X2
-PE
14.2 / WG009.
L+_1X10 / 17.1
PE
GLAND
-1X10
+JB
PE
-WG121
MPRXCX
4x1,5 mm
+SB
*1_9_002
*0_9_014
P
PSL/H
4-20mA
Reinoel
Ablaufdruck
Clean-oil
discharge pressure
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
A/Q
-WG203
.-O
3x0,75 mm
1
-WG202
.-O
2x0,34 mm
1
-WG201
.-O
2x0,34 mm
-1X20
PE_1X20 / 18.6
M_1X20 / 18.5
*0_9_013
P
SMS
4-20mA
WMS
Schlammraumberwachung
Sludge space monitoring
Kunde:
Customer:
Projekt:
Project:
Wasserabfuhr
Water monitoring system
GEA Westfalia
Separator
Separator Signale
Separator signals
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
16
67 Bl./Sh.
=00-K1
/24.5
E1.7
-X2
11
16
X11
-WG011
MPRXCX
7x1,5 mm
+JB
16.3 / L+_1X10
M_1X10 / 18.3
-1X10
11
Reserve
Spare
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
10
Reserve
Spare
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Separator Vibro
Separator vibro
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
17
67 Bl./Sh.
=00-K1
=00-K1
=00-K1
=00-K1
/25.4
/25.4
/25.4
/25.4
/25.4
A0.2
A0.1
A0.4
A0.5
X12
6
X12
5
X12
X12
X12
=00-K1
A0.0
11.9 / M.X
19
GLAND
17
GLAND
10
PE
18
18
11
17
16
14
15
-PE
GLAND
13
-X2
12
-PE
-WG011
MPRXCX
7x1,5 mm
17.1 / M_1X10
14
PE
-PE
-1X10
PE
16
-PE
-PE
GLAND
13
GLAND
-1X10
12
-PE
15
+JB
-WG122
MPRXCX
3x1,5 mm
+SB
16.3 / M_1X20
16.3
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Verdrngungs- und
Fllwasser
Displacem- and
filling water
GEA Westfalia
Separator
PE
Separator Ventile
Separator valves
PE
*0_7_011
-
*0_7_010
PE
-WG205
.-J
3x0,75 mm
*9_7_005
Steuerwasser
Operating water
PE
-WG204
.-J
3x0,75 mm
Zulaufventil
Feed valve
PE
*9_7_004
-
*8_7_002
Date
Editor
Tested
-WG106
MPRXCX
2x1,5 mm
+
-WG105
MPRXCX
2x1,5 mm
+
-WG010
MPRXCX
2x1,5 mm
-1X20
PE_1X20
Kreislaufventil
Circulation valve
Wasserabfuhrventil
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
18
67 Bl./Sh.
24V DC
16.9 / L+.X
=00-K1
/24.5
E1.0
9
X11
14.9 / M.R
M.R / 21.0
GLAND
-X2
-PE
1
Brcke entfernen bei

Anschlu einer
Zulaufpumpe!
(Option)
Link remove at
connection of an feed
pump! (optional)
-WG005
MPRXCX
2x1,5 mm
=MCC
PE
/13.0
PE
Rckmeldung Zulaufpumpe
Feed back feed pump
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator

Rev.01 = 11
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
19
67 Bl./Sh.
min / max
Temperaturberwachung
Min / max
temperature monitoring
=00-K1
4-20mA = 0-120C
/25.5
/25.5
AIR-P
16
X13
15
X13
AIR-N
SC
-X2
=0-SC
-SC
-WG003
.CY-O
4x1,5 mm
*0_9_006
PT100
2
PT100
Reserve
Spare
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
min / max
Min / max
Rev.01 = 11
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
20
67 Bl./Sh.
=00-K1
=00-K1
=00-K1
/25.4
/25.4
/25.4
/25.4
A1.3
A1.4
A1.5
14
A1
A1
A1
8
A1
A2
-K4
A2
-K3
A2
-K2
A2
-K1
X12
13
X12
12
X12
=00-K1
A0.7
X12
19.9 / M.R
Sammelstrung
Common failure
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GLAND
TAH Temperatur
Alarm max
TAH temperature
alarm max
GEA Westfalia
Separator
PE
-WG004
MPRXCX
2x1,5 mm
PE
-X
PE
7
GLAND
Wasserschlossalarm
Water seal broken alarm
14
12
11
11
-X
PE
-WG003
MPRXCX
2x1,5 mm
PE
-X
Kunde
3
-WG002
MPRXCX
2x1,5 mm
PE
=Customer
+L-X
/21.5
PE
GLAND
-X2
-K4
/21.3
-PE
-WG001
MPRXCX
2x1,5 mm
14
12
14
12
31
/10.1
-K3
/21.2
32
11
/21.1
12
12
-K2
=0-S1
11 /21.5
11 /21.3
12
14
12
12
-K1
14
14
11 /21.2
11
14
11 /21.0
GLAND
14
-X
TAL Temperatur
Alarm min
TAL temperature
alarm min
Signalaustausch
Signal exchange
Rev.01 = 100
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
21
67 Bl./Sh.
=00-K1
=00-K1
/25.5
/25.5
/25.5
/25.5
AI1-C
AI2-C
-
AI3-C
X13
X13
12
X13
X13
=00-K1
AI0-C
-
8
Name
=00-K1
24V DC
M.K / 23.0
Date
Editor
Tested
Date
/24.5
Masse Analog
Ground analog
Changes
=00-K1
E0.7
X11
15.9 / L+.A
11.9 / M.K
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Masse Analog
Ground analog
Masse Analog
Ground analog
GEA Westfalia
Separator
Masse Analog
Ground analog
SPS bersicht
PLC overview
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
22
67 Bl./Sh.
-K1
-X12
...
...
...
...
+1.7
+2.7
+0.7
+1.7
8
7
6
5
4
3
2
10
11
12
13
14
15
16
AI1-C
AI2-U
AI2-I
AI2-C
AI3-U
AI3-I
AI3-C
M ana
M ana
AIR-P
AIR-N
16
15
14
13
12
11
10
+2.0
+2.1
+2.2
+2.3
+2.4
+2.5
+2.6
+2.7
2L+
2L+
2M
3L+
3L+
3M
1L+
1M
13
12
11
10
9
8
7
6
5
4
3
2
1
-X1
L+
M
AT1
AT2
4
3
2
1
1M /24.4
X10:16
1L+ /24.4
X10:15
3M /24.4
X10:14
3L+ /24.4
X10:12
X10:11
X10:9
2M /24.4
DO/DI 24VDC
Pover Supply
2L+ /24.4
6
M ana
AO1-I
4
AO1-U
M ana
2
AO0-I
AO0-U
L+
AT2
Digital Input 24VDC
X1:4
X1:3
X1:2
X1:1
AT1
Analog Output
-X10
14
-PE
Date
Editor
Tested
Name
PT100
11.9 / L+.K
22.9 / M.K
Date
10
-X14
A
B
SC
Changes
11
AI1-I
3
AI0-C
Analog Input
A
B
SC
12
AI1-U
2
AI0-I
X2/MPI
-X13
AI0-U
A
B
SC
13
15
PE
A
B
SC
DI +0.0
DI +0.0
DO +0.0
DO +1.0
14
16
X10:PE
1L+
=
1M
=
2L+,2M=
3L+,3M=
X5/P-BUS
15
Input 24VDC, 4A
MMC
-X7
+1.7
+1.6
+1.5
+1.4
+1.3
+1.2
+1.1
+1.0
+0.7
+0.6
+0.5
+0.4
+0.3
+0.2
+0.1
+0.0
16
Digital Output 24VDC 0,5A
+1.7
+1.6
+1.5
+1.4
+1.3
+1.2
+1.1
+1.0
+0.7
+0.6
+0.5
+0.4
+0.3
+0.2
+0.1
+0.0
-X11
Digital Input 24VDC
6ES7613-1SB02-0AC0
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
PLC power supply
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
23
67 Bl./Sh.
-K1
X10:1
X10:2
X10:3
X10:4
X10:5
X10:6
X10:7
Separator Not-Halt
Separator emergency stop
24V
=0-T2:L+
/12.1
/23.5
X10:8
X10:9
X10:10
0V
/23.5
24V
/23.5
X10:11
X10:12
X10:13
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
0V
/23.5
24V
/23.5
0V
/23.5
X10:14
X10:15
X10:16
E2.0
E0.0
E2.1
E0.1
E2.2
E0.2
E2.3
E0.3
E2.4
E0.4
E2.5
E0.5
E2.6
E0.6
E2.7
E0.7
2L+
E1.0
2L+
E1.1
2M
E1.2
3L+
E1.3
3L+
E1.4
3M
E1.5
1L+
E1.6
1M
E1.7
GEA Westfalia
Separator
SPS bersicht
PLC overview
X11:1
X11:2
/14.1
=01-X2:20
Separator Strung
Separator failure
/14.2
=01-X2:21
Separator Strung
Separator failure
/15.2
=01-T2:4+
Drehzahlberwachung
/16.3
=01-X2:10
Wasserabfuhr
/22.1
=01-T2:5+
/19.1
=MCC
Separator Strung
Separator failure
/17.4
=01-X2:11
Reserve
Spare
X11:3
X11:4
X11:5
X11:6
X11:7
X11:8
X11:9
X11:10
X11:11
X11:12
X11:13
X11:14
X11:15
X11:16
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
24
67 Bl./Sh.
-K1
Zulaufventil
Feed valve
=01-X2:12
/18.1
Verdrngungs- und Fllwasser

Displacem- and filling water
=01-X2:15
/18.4
Steuerwasser
Operating water
=01-X2:14
/18.3
X12:1
X12:2
X12:3
X12:4
Kreislaufventil
Circulation valve
=01-X2:17
/18.5
Wasserabfuhrventil
=01-X2:18
/18.6
X12:5
X12:6
X12:7
Sammelstrung
Common failure
=100-K1:A1
/21.1
X12:8
A0.0
AI0-U
A0.1
AI0-I
A0.2
AI0-C
A0.3
A0.4
AI1-U
AI1-I
A0.5
AI1-C
A0.6
V
AI2-U
AI2-I
A0.7
AI2-C
-
Separator Start/Stop
Separator start/stop
=01-K1:A1
/14.4
X12:9
X12:10
X12:11
Wasserschlossalarm
=100-K2:A1
/21.2
TAH Temperatur Alarm max

TAH temperature alarm max
=100-K3:A1
/21.3
TAL Temperatur Alarm min

TAL temperature alarm min
=100-K4:A1
/21.5
X12:12
X12:13
X12:14
X12:15
X12:16
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
AI3-U
AI3-I
A1.0
A1.1
AI3-C
X13:1
X13:2
X13:3
/13.7
=01-T1:8
Masse Analog
Ground analog
/22.2
X13:4
X13:5
X13:6
/16.1
=01-X2:6
/22.3
-K1:3
/16.2
=01-X2:8
Reinoel Ablaufdruck
Clean-oil discharge pressure
Masse Analog
Ground analog
X13:7
X13:8
X13:9
/22.4
Masse Analog
Ground analog
/22.5
Masse Analog
Ground analog
X13:10
X13:11
X13:12
A1.2
A1.3
MANA
A1.4
Mana
X13:13
X13:14
A1.5
A1.6
AIR-P
PT100
A1.7
GEA Westfalia
Separator
AIR-N
SPS bersicht
PLC overview
X13:15
X13:16
/20.6
=11-X2:5
min / max Temperaturberwachung

Min / max temperature monitoring
/20.6
=11-X2:6

Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
25
67 Bl./Sh.
-K1
AO0-U
AO0-I
MANA
X14:1
X14:2
X14:3
X14:4
AO1-I
MANA
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
SPS bersicht
PLC overview
X14:5
X14:6
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EFS
Bl./Sh.
26
67 Bl./Sh.
410 mm
380 mm
54 mm
Terminals
=00-K1
PE
Cable
route
Terminals
PE
=0-S1
=0-P1
=0-M1
pocket for circuit diagram
10 mm
NO. _ HFO PURIFIER

CONTROL PANEL
600 mm
582 mm
360 mm
350 mm
Cabinet
Custody
space
for key
330
150
M10
=00-K1
=0-M1
=0-P1
=0-S1
27
Steuergert Timing unit

Filter / Lfter Filter / fan
Spannungsversorgung Power supply
Hauptschalter Isolator
36
54
15
10,2
Mastab 1:4,5 mm
Scale 1:4,5 mm
HFO 1/2
Gewicht: ca. 30kg

Weight: ca. 30kg
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Aufbauplan
Arrangement drawing
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& ELU
Bl./Sh.
27
67 Bl./Sh.
Mountingplate
37x75
=01-T2
=01-T1
=01-K1
=100-K1
=100-K2
=100-K3
=100-K4
=0-F1
=0-T2
=0-24M
37x75
=11-X2
=100-X2
37x75
PE
37x75
=01-X2
=01-X1
=0-X2
=0-X1
37x75
37x75
PE
Date
Editor
Tested
Changes
Date
Name
Cable glands
Yard cable size
8x M20
6x M20
3x M20
10,0 - 12,5mm
12,0 - 14,5mm
Spare
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
0005-4515-600
0005-4516-600
0005-4443-630
GEA Westfalia
Separator
Aufbauplan
Arrangement drawing
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& ELU
Bl./Sh.
28
67 Bl./Sh.
Regelung Gert D10

Control unit D10
Taste
Button
Prozess Stop
Process stop
Prozess Start
Process start
Lampentest
Lamp test
Serienbetrieb
Series operation
Hilfe
Help
Separator
Separator
Zulauf
Feed
Schlamm
Sludge
1
2
3
4
S
F2
F3
F4
165
F1
6
7
SF
DC5V
ESC
FRCE
RUN
STOP
EDIT
202x155mm
Tiefe:
depth:
88mm
Gewicht:
weight:
1,35kg
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
PID
Zurck
Return
Process
STOP
Process
START
LAMPTEST
SERIES
1
D10
D10
FEED
SLUDGE
PID
HOME
DIR
Bestell-nr.
order no.
0005-4050-430
Programm-Nr.
program-no.
8106-0D10-101
Rev.01 =
As built +
Sprache:
Language:
HELP
ENTER
215
Ausschnittmass:
cutout dimension:
Symbol
Symbol
Benennung
Designation
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& ELU
Bl./Sh.
29
67 Bl./Sh.
Not-Halt Gehuse mit Schutzkragen

Emergency stop cabinet with protective collar
=Additions
-S01
71 mm
54 mm
85 mm
Not-Halt-Box
m
5
109 mm
85 mm
61 mm
protection class: "IP 65"
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Note: Installation should be carry out by customer!
18 mm
M20
8-13mm
GEA Westfalia
Separator
Not-Halt-Box
Energency stop box
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& ELU
Bl./Sh.
30
67 Bl./Sh.
Stromwandler
Current transformer
(TAID)
42
=Additions
-B1
84
50/1A
Stromwandler
Current transformer
60
57
56
4mm
5,5
50
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stromwandler
Current transformer
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& ELU
Bl./Sh.
31
67 Bl./Sh.
(3RN10 10)
=Additions
-F1
91
22,5
5
A1
T1
86
A1 / A2 =
T2
T1 / T2 =
95 / 96 =
80
74
95
96
97
98
A2
10
10
90
62
97 / 98 =
Spannungsversorgung
power supply
PTC
PTC
Schliesser
NO-contact
Oeffner
NC-contact
28
57
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& ELU
Bl./Sh.
32
67 Bl./Sh.
SC
SC
SC
SC
SC
SC
SC
SC
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Kabeltyp
Cable type
Kabeltyp
Cable type
GLAND
-PE
&EFS/10.1
-WG008
SC
GLAND
-PE
&EFS/12.2
=01-WG006
SC
GLAND
-PE
&EFS/13.4
=01-WG007
SC
GLAND
-PE
&EFS/13.4
=01-WG009
SC
GLAND
-PE
&EFS/14.3
GLAND
GLAND
-PE
&EFS/16.3
SC
GLAND
-PE
&EFS/18.2
GLAND
GLAND
-PE
&EFS/18.7
=11-WG005
SC
GLAND
-PE
&EFS/19.2
=100-WG001
SC
GLAND
-PE
&EFS/21.1
=01+JB-1X10_GLAND
=01-WG010
=01+JB-1X10_GLAND
GEA Westfalia
Separator
Zielbezeichnung
Target designation
Kabelname
Cable name
SC
Brcke
Link
-WD001
Zielbezeichnung
Target designation
Anschluss
Connection
=0+-GLAND
Klemme
Terminal
SC
Klemmenleistenbezeichnung
Terminal strip designation
Kabelname
Cable name
MPRXCX 2x2,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x2,5 mm
MPRXCX 4x1,5 mm
MPRXCX 7x1,5 mm
MPRXCX 2x1,5 mm
SC
Date
Editor
Tested
Name
Anschluss
Connection
Einspeisung
Incoming
Separator Not-Halt
Separator Aus
Separator off
Entleerungsberwachung
Ejection monitoring
Separator Strung
Separator failure
Wasserabfuhr
Zulaufventil
Feed valve
Wasserabfuhrventil
Feed back feed pump
Sammelstrung
Common failure
Date
=100
WG001
=11
WG005
=01
WG011
=01
WG010
=01
WG004
=01
WG009
=01
WG007
=01
WG006
=0
WG008
=0
WD001
Funktionstext
Function text
Changes
MPRXCX 7x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
33
67 Bl./Sh.
SC
SC
Date
Editor
Tested
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Kabeltyp
Cable type
Kabeltyp
Cable type
GLAND
-PE
&EFS/21.2
=100-WG003
SC
GLAND
-PE
&EFS/21.4
=100-WG004
SC
GLAND
-PE
&EFS/21.5
GEA Westfalia
Separator
Zielbezeichnung
Target designation
Kabelname
Cable name
SC
Brcke
Link
=100-WG002
Zielbezeichnung
Target designation
Anschluss
Connection
=0+-GLAND
Klemme
Terminal
SC
Anschluss
Connection
Wasserschlossalarm
Kabelname
Cable name
=100
WG004
=100
WG003
=100
WG002
Funktionstext
Function text
Changes
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
34
67 Bl./Sh.
Kabeltyp
Cable type
Kabeltyp
Cable type
-T2
&EFS/11.6
-PE
PE
=01-K1
A2
&EFS/11.6
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-24M
Zielbezeichnung
Target designation
Kabelname
Cable name
13
Zielbezeichnung
Target designation
Anschluss
Connection
=01-X2
Funktionstext
Function text
Brcke
Link
Klemme
Terminal
Steuerspannung DC
Control voltage DC
Kabelname
Cable name
Anschluss
Connection
=0+-24M
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
35
67 Bl./Sh.
Kabeltyp
Cable type
Kabeltyp
Cable type
-PE
&EFS/10.3
-M1
PE
PE
-PE
&EFS/10.5
-1M
PE
PE
-PE
&EFS/10.6
-1T
PE
PE
-PE
&EFS/10.6
-1G
PE
PE
-PE
&EFS/10.6
-PE
PE
-T2
PE
&EFS/11.6
-PE
PE
-24M
&EFS/11.6
Steuergert
Timing unit
-PE
PE
=00-K1
X10:PE
&EFS/23.6
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-PE
Zielbezeichnung
Target designation
Kabelname
Cable name
PE
Erdung Schirm
Earthing screen
Filterlfter
Filter fan
Erdung Tr 1
Earthing door 1
Erdung Gehuse 1
Earthing cabinet 1
Steuerspannung DC
Control voltage DC
Zielbezeichnung
Target designation
Anschluss
Connection
SC
Funktionstext
Function text
Brcke
Link
Klemme
Terminal
-SC
Kabelname
Cable name
Anschluss
Connection
=0+-PE
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
36
67 Bl./Sh.
Changes
Date
Name
SC
-SC
&EFS/10.3
=11-X2
SC
SC
-SC
&EFS/20.7
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-SC
Kabelname
Cable name
PE
Zielbezeichnung
Target designation
Anschluss
Connection
Klemme
Terminal
-PE
Zielbezeichnung
Target designation
Brcke
Link
Anschluss
Connection
Erdung Schirm
Earthing screen
Date
Editor
Tested
=0+-SC
Kabelname
Cable name
Funktionstext
Function text
Kabeltyp
Cable type
Kabeltyp
Cable type
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
37
67 Bl./Sh.
Kabeltyp
Cable type
=Customer+L-X
L1
-F1
&EFS/10.1
=Customer+L-X
-F1
&EFS/10.1
-S1
13
&EFS/10.4
Reserve
Spare
Filterlfter
Filter fan
=
-M1
-M1
Seite / Spalte
Page / column
&EFS/10.4
-S1
23
&EFS/10.5
Date
Editor
Tested
Changes
Zielbezeichnung
Target designation
Kabelname
Cable name
Zielbezeichnung
Target designation
Anschluss
Connection
Einspeisung
Incoming
Funktionstext
Function text
Brcke
Link
Klemme
Terminal
=0+-X1
Anschluss
Connection
Kabeltyp
Cable type
Kabelname
Cable name
MPRXCX 2x2,5 mm
=0
WD001
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-X1
&EFS/10.5
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
38
67 Bl./Sh.
Separator Not-Halt
Separator Not-Halt
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
=MCC-X
=MCC-X
GEA Westfalia
Separator
Klemmenplan =0+-X2
Zielbezeichnung
Target designation
-T2
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Anschluss
Connection
=0+-X2
Kabelname
Cable name
Kabeltyp
Cable type
Kabeltyp
Cable type
Funktionstext
Function text
Kabelname
Cable name
MPRXCX 2x1,5 mm
=0
WG008
Seite / Spalte
Page / column
L+
=01-X2
=00-K1
X10:8
&EFS/12.1
&EFS/12.1
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
39
67 Bl./Sh.
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Anschluss
Connection
=01+-X1
Kabelname
Cable name
Kabeltyp
Cable type
Kabeltyp
Cable type
Funktionstext
Function text
Kabelname
Cable name
MPRXCX 2x2,5 mm
=01
WG007
Seite / Spalte
Page / column
Ejection monitoring
=MCC-X_
-T1
&EFS/13.4
=MCC-X_
-T1
&EFS/13.4
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =01+-X1
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
40
67 Bl./Sh.
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=01+-X2
Anschluss
Connection
Funktionstext
Function text
Kabelname
Cable name
=01
WG010
=01
WG011
=01
WG009
=01
WG004
=01
WG006
MPRXCX 2x1,5 mm
MPRXCX 7x1,5 mm
MPRXCX 4x1,5 mm
MPRXCX 7x1,5 mm
MPRXCX 2x1,5 mm
Seite / Spalte
Page / column
Separator Aus
Separator off
=MCC-X_
-K1
11
&EFS/13.4
=MCC-X_
-K1
12
&EFS/13.4
Drehzahlberwachung
+JB-1X10
-T2
1+
&EFS/15.2
+JB-1X10
-T2
2-
&EFS/15.2
Reinoel Ablaufdruck
+JB-1X10
=0-X2
&EFS/16.1
+JB-1X10
=00-K1
X13:5
&EFS/16.1
Separator Betrieb
Separator operation
Separator Strung
Separator failure
Wasserabfuhr
Reserve
Spare
Zulaufventil
Feed valve
1
5
2
=00-K1
X13:8
&EFS/16.2
=11-X2
&EFS/16.3
10
=00-K1
X11:6
&EFS/16.3
+JB-1X10
10
11
=00-K1
X11:16
&EFS/17.4
-*8_7_002
12
=00-K1
X12:1
&EFS/18.1
-*8_7_002
13
=0-24M
&EFS/18.1
+JB-1X10
12
14
=00-K1
X12:3
&EFS/18.3
+JB-1X10
15
15
=00-K1
X12:2
&EFS/18.4
16
Kreislaufventil
Circulation valve
Wasserabfuhrventil
=
Betrieb
operation
Strung
failure
Date
Editor
Tested
Changes
Separator
Separator
Separator
Separator
&EFS/16.2
+JB-1X10
Steuerwasser
Operating water
+JB-1X10
=MCC
=MCC
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
&EFS/18.4
+JB-1X10
16
17
=00-K1
X12:5
&EFS/18.5
+JB-1X10
18
18
=00-K1
X12:6
&EFS/18.6
+JB-1X10
17
19
&EFS/18.7
=MCC
20
=00-K1
X11:1
&EFS/14.1
=MCC
21
=00-K1
X11:2
&EFS/14.2
GEA Westfalia
Separator
Klemmenplan =01+-X2
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
41
67 Bl./Sh.
Steuerwasser
Operating water
Wasserabfuhr
Drehzahlberwachung
PE
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=01+JB-1X10
MPRXCX 7x1,5 mm
MPRXCX 7x1,5 mm
=01
WG004
=01
WG011
Anschluss
Connection
Funktionstext
Function text
Kabelname
Cable name
=01
WG122
=01
WG106
=01
WG105
=01
WG121
=01
WG101
.-O 2x0,34 mm
MPRXCX 4x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 3x1,5 mm
Seite / Spalte
Page / column
-PE
&EFS/18.3
PE
&EFS/16.4
BN
-*0_9_020
-X2
&EFS/15.2
BU
-*0_9_020
-X2
&EFS/15.2
Reinoel Ablaufdruck
+SB-1X20
-X2
&EFS/16.1
+SB-1X20
-X2
&EFS/16.1
=
Wasserabfuhr
Reserve
Spare
&EFS/16.1
+SB-1X20
-X2
&EFS/16.2
+SB-1X20
-X2
10
&EFS/16.3
&EFS/17.1
&EFS/17.3
10
11
-X2
11
&EFS/17.4
&EFS/17.1
Steuerwasser
Operating water
-*9_7_004
12
-*9_7_004
13
&EFS/18.3
&EFS/18.4
-X2
14
&EFS/18.3

-*9_7_005
14
-*9_7_005
15
-X2
15
&EFS/18.4
+SB-1X20
16
-X2
17
&EFS/18.5
+SB-1X20
10
17
-X2
19
&EFS/18.7
+SB-1X20
11
18
-X2
18
&EFS/18.6
PE
-PE
Kreislaufventil
Circulation valve
Wasserabfuhrventil
=
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
&EFS/18.4
Rev.01 = 01
As built + JB
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
42
67 Bl./Sh.
SC
SC
SC
Date
Editor
Tested
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
Kabeltyp
Cable type
Kabeltyp
Cable type
=0-GLAND
GLAND
+SB-1X20
PE:PE
GLAND
=0-GLAND
GLAND
-WG105
SC
GLAND
-PE
&EFS/18.3
-WG106
SC
GLAND
-PE
&EFS/18.4
GEA Westfalia
Separator
=01
WG004
=01
WG011
GLAND
Zielbezeichnung
Target designation
Kabelname
Cable name
PE:PE
Brcke
Link
+SB-1X20
Zielbezeichnung
Target designation
Anschluss
Connection
=01+JB-1X10_GLAND
MPRXCX 7x1,5 mm
MPRXCX 7x1,5 mm
Klemme
Terminal
SC
Anschluss
Connection
Wasserabfuhr
Wasserabfuhrventil
Steuerwasser
Operating water
Kabelname
Cable name
=01
WG106
=01
WG105
=01
WG122
=01
WG121
Funktionstext
Function text
Changes
MPRXCX 4x1,5 mm
MPRXCX 3x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
SC
&EFS/16.3
SC
&EFS/18.7
Rev.01 = 01
As built + JB
Sprache:
Language:
Seite / Spalte
Page / column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
43
67 Bl./Sh.
Kabeltyp
Cable type
+JB-1X10
&EFS/16.1
BK
-*1_9_002
+JB-1X10
&EFS/16.1
=01
WG121
=01
WG122
Kabelname
Cable name
Zielbezeichnung
Target designation
Anschluss
Connection
-*1_9_002
Zielbezeichnung
Target designation
Brcke
Link
Klemme
Terminal
WH
Funktionstext
Function text
Kabelname
Cable name
Reinoel Ablaufdruck
=01
WG205
=01
WG204
=01
WG203
=01
WG202
=01
WG201
Anschluss
Connection
=01+SB-1X20
MPRXCX 3x1,5 mm
MPRXCX 4x1,5 mm
Kabeltyp
Cable type
.-O 2x0,34 mm
.-O 2x0,34 mm
.-O 3x0,75 mm
.-J 3x0,75 mm
.-J 3x0,75 mm
Seite / Spalte
Page / column
WH
-*0_9_014
BK
-*0_9_014
+JB-1X10
&EFS/16.2
+JB-1X10
&EFS/16.3
&EFS/16.2
Wasserabfuhr
BK
-*0_9_013
A/Q
BN
-*0_9_013
&EFS/16.3
GY
-*0_9_013
&EFS/16.3
Kreislaufventil
Circulation valve
BN
-*0_7_010
BU
-*0_7_010
+JB-1X10
16
&EFS/18.5
&EFS/18.5
Wasserabfuhrventil
BN
-*0_7_011
10
+JB-1X10
17
&EFS/18.7
BU
-*0_7_011
11
+JB-1X10
18
&EFS/18.6
-*0_7_010
PE
PE
+JB-1X10_GLAND
GLAND
-*0_7_011
PE
PE
+JB-1X10_GLAND
GLAND
Kreislaufventil
Circulation valve
Wasserabfuhrventil
PE
PE
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
SC
SC
&EFS/18.7
Rev.01 = 01
As built + SB
Sprache:
Language:
&EFS/18.6
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
44
67 Bl./Sh.
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=100+-X2
Anschluss
Connection
Funktionstext
Function text
Kabelname
Cable name
=100
WG004
=100
WG003
=100
WG002
=100
WG001
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
Seite / Spalte
Page / column
Sammelstrung
Common failure
=Customer+L-X
-K1
11
&EFS/21.1
=Customer+L-X
-K1
14
&EFS/21.1
Wasserschlossalarm
=Customer+L-X
-K2
11
&EFS/21.2
=Customer+L-X
-K2
14
&EFS/21.2

=Customer+L-X
-K3
11
&EFS/21.3
=Customer+L-X
-K3
14
&EFS/21.4

=Customer+L-X
-K4
11
&EFS/21.5
=Customer+L-X
-K4
14
&EFS/21.5
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 = 100
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
45
67 Bl./Sh.
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=11+-X2
Anschluss
Connection
=11
WG003
=11
WG005
Funktionstext
Function text
Kabelname
Cable name
MPRXCX 2x1,5 mm
.CY-O 4x1,5 mm
Seite / Spalte
Page / column
Feed back feed pump
=MCC
=01-X2
&EFS/19.1
=MCC
=00-K1
X11:9
&EFS/19.1
Reserve
Spare
-*0_9_006
&EFS/20.5
-*0_9_006
&EFS/20.5
-*0_9_006
=00-K1
X13:15
&EFS/20.6
-*0_9_006
=00-K1
X13:16
&EFS/20.6
SC
SC
=0-SC
SC
&EFS/20.7

=
SC
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
-WG003
GEA Westfalia
Separator
Klemmenplan =11+-X2
Rev.01 = 11
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMA
Bl./Sh.
46
67 Bl./Sh.
Kabelbersicht
Cable layout
Kabelname
Cable name
/Seite.Pfad
/page.path
Ziel (bis)
Target (up to)
Kabeltyp
Cable type
Adern gesamt
Wires total
Adern
verwendet
Wires used
Querschnitt
Cross-section
Lnge
Length
Verschraubung / Klemmbereich
Cable gland / clamping range
=0-WD001
&EFS/10.1
=0-GLAND;=0-X1
=Customer+L-X
MPRXCX
2x
2,5 mm
M20x1,5 / 12-14,5mm
=0-WG008
&EFS/12.1
=0-GLAND;=0-X2
=MCC-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG004
&EFS/15.1
=0-GLAND;=01-X2
=01+JB-1X10_GLAND;
=01+JB-1X10
MPRXCX
7x
1,5 mm
M20x1,5 / 12-14,5mm
=01-WG006
&EFS/13.4
=0-GLAND;=01-X2
=MCC-X_
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG007
&EFS/13.4
=0-GLAND;=01-X1
=MCC-X_
MPRXCX
2x
2,5 mm
M20x1,5 / 12-14,5mm
=01-WG009
&EFS/14.1
=0-GLAND;=01-X2
=MCC
MPRXCX
4x
1,5 mm
M20x1,5 / 12-14,5mm
=01-WG010
&EFS/18.1
=0-GLAND;=01-X2
=01-*8_7_002
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG011
&EFS/18.3
=0-GLAND;=01-X2
=01+JB-1X10_GLAND;
=01+JB-1X10
MPRXCX
7x
1,5 mm
M20x1,5 / 12-14,5mm
=01-WG101
&EFS/15.1
=01+JB-1X10
=01-*0_9_020
.-O
2x
0,34 mm
M12x1,5 / 3-6mm
=01-WG105
&EFS/18.3
=01+JB-1X10;
=01+JB-1X10_GLAND
=01-*9_7_004
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG106
&EFS/18.4
=01+JB-1X10;
=01+JB-1X10_GLAND
=01-*9_7_005
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG121
&EFS/16.1
=01+JB-1X10;
=01+JB-1X10_GLAND
=01+SB-1X20
MPRXCX
4x
1,5 mm
M20 Z14 / 12-14,5mm
=01-WG122
&EFS/18.5
=01+JB-1X10;
=01+JB-1X10_GLAND
=01+SB-1X20
MPRXCX
3x
1,5 mm
M20 Z14 / 12-14,5mm
=01-WG201
&EFS/16.1
=01+SB-1X20
=01-*1_9_002
.-O
2x
0,34 mm
Integrated in the sensor

block
=01-WG202
&EFS/16.2
=01+SB-1X20
=01-*0_9_014
.-O
2x
0,34 mm

block
=01-WG203
&EFS/16.3
=01+SB-1X20
=01-*0_9_013
.-O
3x
0,75 mm

block
=01-WG204
&EFS/18.5
=01+SB-1X20
=01-*0_7_010
.-J
3x
0,75 mm

block
=01-WG205
&EFS/18.6
=01+SB-1X20
=01-*0_7_011
.-J
3x
0,75 mm

block
=100-WG001
&EFS/21.1
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
Date
Editor
Tested
Changes
Quelle (von)
Source (from)
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Kabelbersicht
Cable layout
Rev.01 =
As built +
Sprache:
Language:
Bemerkung
Remark
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMB
Bl./Sh.
47
67 Bl./Sh.
Kabelbersicht
Cable layout
Kabelname
Cable name
/Seite.Pfad
/page.path
Ziel (bis)
Target (up to)
Kabeltyp
Cable type
Adern gesamt
Wires total
Adern
verwendet
Wires used
Querschnitt
Cross-section
Lnge
Length
=100-WG002
&EFS/21.2
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=100-WG003
&EFS/21.3
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=100-WG004
&EFS/21.5
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=11-WG003
&EFS/20.5
=11-X2
=11-*0_9_006
.CY-O
4x
1,5 mm
M20x1,5 / 12-14,5mm
=11-WG005
&EFS/19.1
=0-GLAND;=11-X2
=MCC
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
Date
Editor
Tested
Changes
Quelle (von)
Source (from)
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Kabelbersicht
Cable layout
Rev.01 =
As built +
Sprache:
Language:
Bemerkung
Remark
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMB
Bl./Sh.
48
67 Bl./Sh.
Klemmenkasten Separator -1X10

Terminal box separator -1X10
Sensorblock -1X20
Sensor bloc -1X20
Verschraubung
Cable gland
Schaltschrank
Control cabinet
+JB-1X10
PE
-X2
PE
+
S
+
-
blue
blue
11
brown
PE
PE
PE
PE
brown
10
PE
Verdraengungs-u. fuellwasser
displacem. a. filling water
P
I
2x0,34mm
-WG202
3x0,75mm
-WG203
PSL/H Reinoel
Ablaufdruck
PSL/H clean oil
discharge pressure
SMS Schlammraumueberwachung
SMS sludge space monitoring
Wasserabfuhr
water monitoring system
grey
2x1,5mm
-WG106
brown
PE
Steuerwasser
operating water
black
2x0,34mm
-WG201
black
white
2x1,5mm
-WG105
black
blue
white
+
blue
brown
PE
19
18
18
-WG122
3x1,5mm
M20 (10-12,5mm)
17
17
16
-WG121
4x1,5mm
M20 (12-14,5mm)
15
16
14
15
+SB-1X20
1
brown
13
14
-WG011
7x1,5mm
M20 (12-14,5mm)
12
13
11
12
2
Drehzahlueberwachung
speed monitoring device
10
11
10
8
+
2x0,34mm
-WG101
blue
-WG004
7x1,5mm
M20 (12-14,5mm)
brown
2
1
PE
3x0,75mm
-WG204
3x0,75mm
-WG205
Kreislaufventil
circulation valve
Wasserabfuhrventil
water discharge valve
2
3
PE
Verschraubung
Cable gland
PE
Bestell-Nr.:0005-1827-280
order-no.:0005-1827-280
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMB
Bl./Sh.
49
67 Bl./Sh.
Hinweise zur Installation von Kabeln und Leitungen

Directions for installation from cables and conductors
*
Schutzmanahmen nach Bestimmungen des VDE bzw. zustndigen EVU ausfhren!

All protective measures are to be taken in accordance with electric codes, rules and regulations!
Generell sind die Vorgaben des lokalen Energieversorgers zwingend einzuhalten

In general the the rules and regulations of the lokal power authorities has to be followed.
Kabel und Leitungen sind so auszuwhlen und zu verlegen, dass eine Gefhrdung von Personen und der Umgebung ausgeschlossen ist.
Die angegebenen Kabelquerschnitte sind bezogen auf eine Kabellnge von 50m, Kupfer als Leitematerial, Verlegeart "C" und
eine maximale Umgebungstemperatur von 30C. Siehe hierzu DIN VDE 0298-4 (Verwendung von Kabeln und isolierten Leitungen fr Starkstromanlagen - Teil 4:
Empfohlene Werte fr die Strombelastbarkeit von Kabeln und Leitungen fr feste Verlegung in und an Gebuden und von flexiblen Leitungen).
Neben der Strombelastung sind bei der Errichtung von Kabel- und Leitungsanlagen weitere Faktoren zu bercksichtigen.
Siehe hierzu IEC 60364-5-52 (Errichten von Niederspannungsanlagen - Teil 5: Auswahl und Errichtung elektrischer Betriebsmittel - Kapitel 52: Kabel- und Leitungsanlagen)
Cables and lines must be selected and laid in a way to eliminate any risk to persons and the environment.
The cable cross-sections specified in these drawings are based on a max. length of 50m, copper as conducting material,laying version "C" and a maximum ambient temperature of 30C.
Refer also to DIN VDE 0298-4 (Usage of cables and cords in power installations - Part 4:
Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords).
Besides the current load are in the erection of wiring systems additional parameters to take into account.
Refer also to IEC 60364-5-52 (Erection of low voltage installations - Part 5: Selection and erection of electrical equipment - Chapter 52: Wiring systems)
Messleitungen sind grundstzlich abgeschirmt zu verlegen!

Measuring lines must always be laid shielded!
WD-Kabel getrennt vom WF-/WG-Kabeln verlegen!

WD-cables to be installed separate from WF-/WG-cable!
Alle Kabel mssen den Flammentest Anforderungen fr gebndelte Kabel nach IEC 60332-3 / IEEE 45-18.13 gerecht werden.
All cables must meet the flame test requirements for bunched cables acc. to IEC 60332-3 / IEEE 45-18.13.
Das gesamte Kabelmaterial muss halogenfrei nach IEC 60754-1, giftfrei nach IEC 60754 und korrosionsfrei nach IEC 60754-2 sein
All cable materials must be free of halogens acc. to IEC 60754-1, no toxicity acc. to 60754 and no corrosivity acc. to IEC 60754-2.
Alle Kabel mssen eine Abnahme der relevante Abnahmegesellschaft haben. Isolierungsfestigkeit: 0.6/1KV
All cables must have an approval of the relevant classification society. Insulating strength: 0.6/1KV
Date
GEA WSPN Standard: Nexans MPRX 0.6/1kV.
WD-Kabel
WD-cable
Energiekabel < 1kV

Energy cable < 1kV
WE-Kabel
WE-cable
Erdungs-/Potentialausgleichsleiterleiter
Earth-/ Equipotential bonding conductor
WF-Kabel
WF-cable
Datenbus
Data bus
WG-Kabel
WG-cable
Steuer-/ Messkabel
Control-/measuring cable
WH-Kabel
WH-cable
Lichtwellenleiter
Optical fibre
Legende Kabeltypen (Kabelliste)

Legend cable typ (list of cables)
-J
Kabel / Leitung mit Schutzleiter

Cable / conductor with protective conductor
FC.CY
Motorkabel FU mit konzentrischem Auenleiter (PE)

Motor cable FC with concentric outer (PE)
-O
Kabel / Leitung ohne Schutzleiter

Cable / conductor without protective conductor
PL
Potentialausgleichsleiter
Equipotential bonding conductor
CY-J
Kabel / Leitung mit Schutzleiter geschirmt

Cable / conductor with protective conductor screened
Ex-CY
Steuerleitung blau fr eigensichere Stromkreise

Control line blue for intrinsically safecircuits
CY-O
Kabel / Leitung ohne Schutzleiter geschirmt

Cable / conductor without protective conductor screened
CY-TP
Datenleitung paarverseilt
Data line twisted pair
FC.CY-J
Motorkabel FU geschirmt mit Schutzleiter

Motor cable FC screened with protective conductor
Date
Editor
Tested
Changes
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator

Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMB
Bl./Sh.
50
67 Bl./Sh.
FU
FC
Generelle Information zum Potentialausgleich.

Die Informationen auf diesem Blatt sind nicht
kundenspezifisch angepasst.
=..-U.
IP54
General Information for the equipotential bonding system.

Please note, that the information shown on this page are
not customised.
10 mm
GN YE
PE-Schiene
protective earth - rail
IDM
25 mm
GN YE
10 mm
GN YE
PA
PA1
PA2
PA3
PA4
PA5
PA6
PA7
Potentialausgleichsschiene
equipotential bonding strip
Potentialausgleich Gebude
equipotential bonding building
10 mm
GN YE
25 mm
GN YE
Fundamenterder
foundation earth
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMB
Bl./Sh.
51
67 Bl./Sh.
Changes
Date
Name
Date
Editor
Tested
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
=100-WG004
SC
SC
GLAND
GLAND
GLAND
GLAND
X
X
X
X
X
SC
SC
MPRXCX 2x1,5 mm
=100-WG004
MPRXCX 2x1,5 mm
=100-WG003
MPRXCX 2x1,5 mm
=100-WG002
MPRXCX 2x1,5 mm
=100-WG001
MPRXCX 2x1,5 mm
-PE
&EFS/21.5
&EFS/21.4
&EFS/21.2
&EFS/21.1
&EFS/19.2
&EFS/18.7
&EFS/18.2
&EFS/16.3
&EFS/14.3
&EFS/13.4
&EFS/13.4

=100-WG003
SC
SC

=100-WG002
SC
SC
Wasserschlossalarm
=100-WG001
GLAND
SC
GLAND
GLAND
-PE
-PE
-PE
-PE
&EFS/12.2
Sammelstrung
Common failure
SC
SC
=11-WG005
=11-WG005
MPRXCX 7x1,5 mm
GLAND
GLAND
=01-WG011
GLAND
Feed back feed pump
SC
GLAND
=01+JB-1X10_GLAND
GLAND
MPRXCX 2x1,5 mm
=01-WG010
MPRXCX 7x1,5 mm
GLAND
Wasserabfuhrventil
=01-WG010
SC
SC
=01-WG004
MPRXCX 4x1,5 mm
=01-WG009
MPRXCX 2x2,5 mm
=01-WG007
GLAND
-PE
&EFS/10.1
Zulaufventil
Feed valve
=01+JB-1X10_GLAND
SC
SC
Wasserabfuhr
SC
SC
=01-WG009
=01-WG007
MPRXCX 2x1,5 mm
=01-WG006
GLAND
-PE
1
Separator Strung
Separator failure
Ejection monitoring
=01-WG006
SC
SC
Separator Aus
Separator off
SC
SC
MPRXCX 2x1,5 mm
-WG008
GLAND
Ziel intern
Target intern
MPRXCX 2x2,5 mm
-WD001
Klemmennummer
Terminal number
-WG008
-WD001
Querverweis
Cross reference
Separator Not-Halt
Einspeisung
Incoming
=0+-GLAND
0
5
6
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
SC
SC
GLAND
Rev.01 =
As built +
8106-2004-058
DCC
& EMC
Bl./Sh.
52
67 Bl./Sh.
A2
-T2
Klemmennummer
Terminal number
Brcken
Bridges
=0+-24M
Ziel intern
Target intern
BU
13
GN/YE
PE
Name
=01-X2
Steuerspannung DC
Control voltage DC
Date
Editor
Tested
Date
PE
-PE
13
Changes
=01-K1
Querverweis
Cross reference
&EFS/11.6
&EFS/11.6
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
53
67 Bl./Sh.
&EFS/23.6
-24M
-PE
-PE
Ziel intern
Target intern
-PE
&EFS/11.6
&EFS/11.6
&EFS/10.6
&EFS/10.6
&EFS/10.6
Querverweis
Cross reference
&EFS/10.5
&EFS/10.3
PE
PE
PE
PE
PE
PE
PE
SC
GN/YE
PE
L
GN/YE
PE
GN/YE
PE
GN/YE
PE
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
PE
PE
Steuergert
Timing unit
-PE
Steuerspannung DC
Control voltage DC
-1G
Erdung Gehuse 1
Earthing cabinet 1
Erdung Tr 1
Earthing door 1
-1M
-1T
PE
Filterlfter
Filter fan
-M1
-SC
Erdung Schirm
Earthing screen
Changes
PE
M
1~
SC
Date
Editor
Tested
N
N
Klemmennummer
Terminal number
PE
=0+-PE
Brcken
Bridges
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
54
67 Bl./Sh.
-SC
Ziel intern
Target intern
-SC
Querverweis
Cross reference
&EFS/20.7
&EFS/10.3
SC
Klemmennummer
Terminal number
SC
=0+-SC
Brcken
Bridges
PE
SC
Date
Name

Erdung Schirm
Earthing screen
Date
Editor
Tested
Changes
SC
=11-X2
-PE
PE
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
55
67 Bl./Sh.
&EFS/10.5
&EFS/10.5
-S1
23
&EFS/10.4
&EFS/10.4
-S1
13
-F1
Ziel intern
Target intern
-F1
Querverweis
Cross reference
&EFS/10.1
&EFS/10.1
2
2
RD
L
RD/WH
PE
-WD001
1
L1
MPRXCX 2x2,5 mm
Klemmennummer
Terminal number
=0+-X1
Brcken
Bridges
PE
M
1~
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Filterlfter
Filter fan
Reserve
Spare
Einspeisung
Incoming
-M1
=Customer+L-X
L1
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
56
67 Bl./Sh.
=MCC-X
Ziel intern
Target intern
=MCC-X
Querverweis
Cross reference
&EFS/12.1
&EFS/12.1
2
-WG008
MPRXCX 2x1,5 mm
Klemmennummer
Terminal number
=0+-X2
Brcken
Bridges
Date
Editor
Tested
Changes
Date
Name
Separator Not-Halt
=MCC-X
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
57
67 Bl./Sh.
-T1
-WG007
MPRXCX 2x2,5 mm
Klemmennummer
Terminal number
Brcken
Bridges
=01+-X1
Ziel intern
Target intern
-T1
Querverweis
Cross reference
&EFS/13.4
&EFS/13.4
Date
Editor
Tested
Changes
Date
Name
Ejection monitoring
=MCC-X_
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
58
67 Bl./Sh.
Changes
Date
Editor
Tested
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
2
12
3
15
7
4
16
5
18
6
17
3
MPRXCX 4x1,5 mm
-WG009
MPRXCX 7x1,5 mm
-WG011
21
20
19
18
17
16
15
14
13
12
11
10
=00-K1
=00-K1
=00-K1
=00-K1
=00-K1
=00-K1
=0-24M
=00-K1
=00-K1
=00-K1
=11-X2
=00-K1
X11:2
X11:1
X12:6
X12:5
X12:2
X12:3
X12:1
X11:16
X11:6
X13:8
&EFS/14.2
&EFS/14.1
&EFS/18.7
&EFS/18.6
&EFS/18.5
&EFS/18.4
&EFS/18.4
&EFS/18.3
&EFS/18.1
&EFS/18.1
&EFS/17.4
&EFS/16.3
&EFS/16.3
&EFS/16.2
&EFS/16.2
&EFS/16.1
&EFS/16.1
Separator Strung
Separator failure
=MCC
Separator Betrieb
Separator operation
Wasserabfuhrventil
+
MPRXCX 2x1,5 mm
-WG010
MPRXCX 7x1,5 mm
-WG011
MPRXCX 7x1,5 mm
-WG004
MPRXCX 4x1,5 mm
-WG009
X13:5
&EFS/15.2
&EFS/15.2
&EFS/13.4
Kreislaufventil
Circulation valve
6
1
10

+JB-1X10
Steuerwasser
Operating water
1
MPRXCX 7x1,5 mm
-WG004
=00-K1
=0-X2
2-
1+
12
&EFS/13.4
-*8_7_002
Zulaufventil
Feed valve
Reserve
Spare
+JB-1X10
Wasserabfuhr
=MCC
4
MPRXCX 4x1,5 mm
-WG009
-T2
-T2
-K1
11
Separator Strung
Separator failure
+JB-1X10
=MCC
1
MPRXCX 7x1,5 mm
-WG004
-K1
Separator Betrieb
Separator operation
Reinoel Ablaufdruck
+JB-1X10
MPRXCX 2x1,5 mm
-WG006
Klemmennummer
Terminal number
1
Ziel intern
Target intern
Drehzahlberwachung
=MCC-X_
Querverweis
Cross reference
Separator Aus
Separator off
=01+-X2
0
6
7
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
12
Rev.01 =
As built +
8106-2004-058
DCC
& EMC
Bl./Sh.
59
67 Bl./Sh.
Changes
Date
Name
Date
Editor
Tested
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
1
+
2
8
1
1
MPRXCX 3x1,5 mm
-WG122
MPRXCX 2x1,5 mm
-WG106
2
10
PE
18
17
16
15
14
13
-PE
-X2
-X2
-X2
-X2
-X2
-X2
-X2
-X2
18
19
17
15
14
11
10
&EFS/18.4
&EFS/18.6
&EFS/18.7
&EFS/18.5
&EFS/18.4
&EFS/18.4
&EFS/18.3
&EFS/18.3
&EFS/17.1
&EFS/17.4
&EFS/17.3
&EFS/17.1
&EFS/16.3
&EFS/16.2
&EFS/16.1
&EFS/16.1
&EFS/16.1
&EFS/15.2
&EFS/15.2

Wasserabfuhrventil
+SB-1X20
Kreislaufventil
Circulation valve
4
MPRXCX 2x1,5 mm
-WG105
12
11
10
-X2
-X2
-X2
-*9_7_005

-*9_7_004
Steuerwasser
Operating water
2
MPRXCX 4x1,5 mm
-X2
Reserve
Spare
BU
Wasserabfuhr
BN
-WG121
.-O 2x0,34 mm
-WG101
&EFS/16.4
&EFS/18.3
+SB-1X20
Reinoel Ablaufdruck
-*0_9_020
-PE
Ziel intern
Target intern
Drehzahlberwachung
PE
Klemmennummer
Terminal number
PE
Querverweis
Cross reference
Wasserabfuhr
Steuerwasser
Operating water
=01+JB-1X10
0
5
6
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
3
11
Rev.01 =
As built +
8106-2004-058
DCC
& EMC
Bl./Sh.
60
67 Bl./Sh.
&EFS/18.4
&EFS/18.3
=0-GLANDGLAND
=0-GLANDGLAND
Ziel intern
Target intern
-WG106
SC
SC
SC
SC
PE
SC
SC
PE:PE PE:PE
MPRXCX 2x1,5 mm
GLAND
MPRXCX 2x1,5 mm
GLAND
-WG105
MPRXCX 3x1,5 mm
GLAND
-WG122
Klemmennummer
Terminal number
MPRXCX 4x1,5 mm
GLAND
Brcken
Bridges
-WG121
=01+JB-1X10_GLAND
Querverweis
Cross reference
&EFS/18.7
&EFS/16.3
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
-WG106
Steuerwasser
Operating water
Wasserabfuhrventil
Wasserabfuhr
-WG105
+SB-1X20
PE
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
61
67 Bl./Sh.
Changes
Date
Name
Date
Editor
Tested
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
P
-
BN
+
BU
PE
-*0_7_011
BU
PE
PE
PE
11
X
X
PE
PE
GEA Westfalia
Separator
.-J 3x0,75 mm
-WG205
.-J 3x0,75 mm
-WG204
.-J 3x0,75 mm
-WG205
10
18
17
16
+JB-1X10_GLAND
GLAND
+JB-1X10_GLAND
GLAND
+JB-1X10
+JB-1X10
+JB-1X10
+JB-1X10
+JB-1X10
&EFS/18.7
&EFS/18.6
&EFS/18.6
&EFS/18.7
&EFS/18.5
&EFS/18.5
&EFS/16.3
&EFS/16.3
&EFS/16.3
&EFS/16.2
&EFS/16.2
&EFS/16.1
&EFS/16.1
Wasserabfuhrventil
-*0_7_010
BN
Kreislaufventil
Circulation valve
-*0_7_011
GY
.-J 3x0,75 mm
-WG204
.-O 3x0,75 mm
+JB-1X10
Wasserabfuhrventil
BN
Kreislaufventil
Circulation valve
BK
A/Q
-WG203
.-O 2x0,34 mm
-WG202
+JB-1X10
BK
A/Q
WH
-*0_7_010
-*0_9_013
BK
Wasserabfuhr
WH
-*0_9_014
2
.-O 2x0,34 mm
-WG201
Klemmennummer
Terminal number
Ziel intern
Target intern
-*1_9_002
Querverweis
Cross reference
Reinoel Ablaufdruck
=01+SB-1X20
0
4
5
6
7
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
PE
PE
Rev.01 =
As built +
8106-2004-058
DCC
& EMC
Bl./Sh.
62
67 Bl./Sh.
&EFS/21.5
-K4
14
&EFS/21.5
-K4
11
&EFS/21.4
-K3
14
&EFS/21.3
-K3
11
&EFS/21.2
-K2
14
&EFS/21.2
11
-K2
14
-K1
8
-WG004
MPRXCX 2x1,5 mm
6
-WG003
MPRXCX 2x1,5 mm
4
MPRXCX 2x1,5 mm
3
2
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:


Wasserschlossalarm
Sammelstrung
Common failure
=Customer+L-X
-WG002
-WG001
MPRXCX 2x1,5 mm
Klemmennummer
Terminal number
Brcken
Bridges
=100+-X2
Ziel intern
Target intern
-K1
11
Querverweis
Cross reference
&EFS/21.1
&EFS/21.1
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
63
67 Bl./Sh.
&EFS/20.7
SC
&EFS/20.6
=0-SC
=00-K1
X13:16
&EFS/20.6
=MCC
=MCC
SC
5
2
3
3
4
4
.CY-O 4x1,5 mm
-WG003
-WG005
MPRXCX 2x1,5 mm
Klemmennummer
Terminal number
Brcken
Bridges
=11+-X2
Ziel intern
Target intern
=00-K1
X13:15
&EFS/20.5
&EFS/20.5
Querverweis
Cross reference
&EFS/19.1
&EFS/19.1
Date
Editor
Tested
Changes
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:


Reserve
Spare
Feed back feed pump
-*0_9_006
=MCC
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EMC
Bl./Sh.
64
67 Bl./Sh.
Stckliste
Parts list
Funktionszeichen
Function sign
/Seite.Pfad
/page.path
Bezeichnung
Name
Hersteller
Manufacturer
=0-F1
&EFS/10.1
0005-1551-010
Sicherungsautomat , C 6A , 2 pol
AEG
=0-M1
&EFS/10.4
0005-1409-320
Filterlfter, 207-253V, 50/60Hz, 19/18W, 44/52m/h, IP54, RAL 7035
Pfannenberg
=0-M1
&EFS/10.4
0005-1409-230
Austrittsfilter
Pfannenberg
=0-S1
&EFS/10.1
0005-1439-000
Schwenksteller komplett, rastend, rot, 0-I, 1x 2NO + 1x1NC
Plenge
=0-X1
&EFS/10.1
2002-1201
2-Leiter-Durchgangsklemme 0,08-2,5mm
Wago
=0-24M
&EFS/11.6
1031400000
Durchgangs-Reihenklemme, 1,5 mm, Schraubanschluss, Wemid, dunkelbeige, TS 35
Weidmueller
=0-P1
&EFS/11.8
0005-4396-040
VORSATZ, RUND LEUCHTMELDER LINSE WEISS MIT HALTER
Siemens
=0-P1
&EFS/11.8
3SB3400-1RE
LAMPENFASSUNG MIT INTEGRIERTER LED, AC 230V, WEISS
Siemens
=0-P1
&EFS/11.8
3SB3922-0AV
SCHILDTRAEGER FLACH, FUER BEZEICHNUNGSSCHILD 12,5 X 27MM
Siemens
=0-P1
&EFS/11.8
3SB1901-2AA
BEZEICHNUNGSSCHILD, SILBERFARBEN, FR SELBSTBESCHRIFTUNG, 12,5x27MM
Siemens
=0-T2
&EFS/11.5
0005-1407-020
Einphasennetzgeraet Prim.: 120/230V, 50/60Hz, Sec.: 24VDC, 5A
Siemens
=0-X2
&EFS/12.1
2002-1201
Wago
=01-T1
&EFS/13.5
0005-3482-070
Stromberwachung, 0...1 A AC/ 0...5 A AC/ 0...10 A AC , 1 , 0(4)...20 mA , 0...10 V , 1 Schraubanschluss
Weidmueller
=01-X1
&EFS/13.4
2002-1201
Wago
=01-X2
&EFS/13.4
2002-1201
Wago
=01-K1
&EFS/14.4
0005-4033-040
Relais Einzelkontakt, PLC-Interface, Miniaturrelais mit Leistungskontakt, 1 Wechsler, Un=24 VDC
Phoenix Contakt
=01-T2
&EFS/15.1
0005-4509-000
Sensor-Endstufenklemme, Eingang fr NAMUR-Sensoren, 24V DC Speisespannung
Pepperl & Fuchs
=11-X2
&EFS/19.1
2002-1201
Wago
=100-K1
&EFS/21.1
0005-4033-040
Phoenix Contakt
Date
Editor
Tested
Changes
Bestell-Nr.
Order no..
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stckliste
Parts list
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EPB
Bl./Sh.
65
67 Bl./Sh.
Stckliste
Parts list
Funktionszeichen
Function sign
/Seite.Pfad
/page.path
Bezeichnung
Name
Hersteller
Manufacturer
=100-K2
&EFS/21.2
0005-4033-040
Phoenix Contakt
=100-K3
&EFS/21.3
0005-4033-040
Phoenix Contakt
=100-K4
&EFS/21.5
0005-4033-040
Phoenix Contakt
=100-X2
&EFS/21.1
2002-1201
Wago
=00-K1
&EFS/23.1
0005-4050-430
Komplettgert GEA, C7-613, 24DE/16DA/5AE/2AA, SIMATIC C7
Siemens
-Cabinet
&ELU/27.1
1338500
Kompakt-Schaltschrank AE, lackiert RAL 7035, mit Montageplatte, eintrig
Rittal
-Cabinet
&ELU/27.1
2508000
Wandbefestigungshalter Stahlblech, Wandabstand 10mm
Rittal
-Cabinet
&ELU/27.1
0005-1412-000
Trarretierung fr das AE Programm
Rittal
-Cabinet
&ELU/27.1
2510000
Schaltplantaschen aus Kunststoff Din A4
Rittal
-Cabinet
&ELU/27.1
Lack_AE1030-1338
Lackierung
Plenge
-Cabinet
&ELU/27.1
8556-9999-000
Kleinmaterial Schaltschrank
Plenge
-Cabinet
&ELU/27.1
RESOPALSCHILD100/130
Resopalschild
Kaiser
-Cabinet
&ELU/27.1
4568000
Transportsen fr PS/ES und TS
Rittal
-Cabinet
&ELU/27.1
ADERKENNZEICHNUNG
Aderkennzeichnung
Plenge
-Cabinet
&ELU/27.1
Halogenfreie Kanle
Plenge
-Cabinet
&ELU/27.1
Halogenfreie Verdrahtung
Plenge
-Ground_plate
&ELU/28.1
0005-4515-600
Verschraubung, Z12-A6A, 10-12,5mm
Heinrich
-Ground_plate
&ELU/28.1
0005-4516-600
Verschraubung, Z14, 12-14,5mm
Heinrich
-Ground_plate
&ELU/28.1
0005-4443-630
Blindstopfen Messing, M20x1,5
Jacob
Date
Editor
Tested
Changes
Bestell-Nr.
Order no..
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stckliste
Parts list
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EPB
Bl./Sh.
66
67 Bl./Sh.
Stckliste
Parts list
Funktionszeichen
Function sign
/Seite.Pfad
/page.path
Bezeichnung
Name
Hersteller
Manufacturer
-Ground_plate
&ELU/28.1
22-20-02-2
EMV-Gegenmutter M20/EMV
Heinrich
=Additions
&ELU/28.8
0005-1554-000
Kabelbezeichnung, polyamid
Weidmueller
=Additions
&ELU/28.8
8555-9001-010
Betriebsanleitung D10 NewDesign, englisch
WS Mineraloil Systems
=Additions-S01
&ELU/30.1
0005-0081-030
Pilzdrucktaster Gehuse, verrastend, mit Schutzkragen, 1NC, 2x M20
Siemens
=Additions-S01
&ELU/30.1
0005-4515-600
Heinrich
=Additions-S01
&ELU/30.1
22-20-02-2
Heinrich
=Additions-B1
&ELU/31.2
0005-0924-220
Stromwandler, 50/1A
IME
=Additions-F1
&ELU/32.2
0005-1100-070
THERMISTOR-MOTORSCHUTZ, STANDARD-AUSWERTEGERT, AUTO, 1S+1OE, AC 230V
Siemens
Date
Editor
Tested
Changes
Bestell-Nr.
Order no..
Date
Name
03.03.2011
BEE/PLE
03.02.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stckliste
Parts list
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-058
& EPB
Bl./Sh.
67
67 Bl./Sh.
Contents
3.
LO
Data sheet
P&ID
Equipment list
Dimensioned drawing
Detail drawings:
2064-4100-000
3/2-Way feed valve
9901-8105-440
Dimensioned drawing for motor
9901-8105-305
Starting characteristics
9997-0142-020
Circuit diagram
8106-2004-059
Commissioning equipment, spare parts and tools list
GEA Westfalia Separator Systems GmbH
Process Condition Data Sheet

Manufacurer:
Customer:
Hull No.:
Classification:
DSME
43223
44608
ABS
Project No.:
Oil to be Processed
Application:
Viscosity:
Density:
Inlet Temperature:
Separating Temperature:
Effec.throughput capacity:
Ambient Conditions
Ambient Temperature:
Humidity:
Atmospheric Pressure:
Separator
Type:
Operation Mode:
Ejection Method:
Clean Oil Discharge:
Finish color:
Total weight:
Bowl speed
Bowl weight
Control Unit
Type:
Infeed voltage:
Frequency:
Valve Voltage:
Control Voltage:
Finish Color:
Weight:
Rev. No. 0
H1195
H1196
HD Oil
30
1,01
50
90
3.000
SAE
g/ml 15C
C
C
l/h
IMO No.:
WS Order No:
Drawing No.:
P452946646-9913-PDS010
Operating Water
Hardness:
Chloride Ions:
PH - Value:
Temperature:
Feed Pressure:
Required Capacity:
Consumption / Ejection:
45 C
up to 92%
up to 1000 m Above Sea Level
2 x OSE 20-0196-067/15
total
1,5
Munsell 7.5 BG 7/2
320
12000
71
D 10
440
60
24
230
Munsell 7.5 BG 7/2
55
bar g
kg
rpm
kg
Volt
Hz
DC
Volt
kg
< 55C 12 dH
> 55C 6 dH
< 100 mg/l
6,5 - 7,5
+10C up to +85C
3-10 bar (min.3bar)
0,5 l/s
3-4 l
Compressed Air
Pressure:
7
Standard operating compressed air
Min. 3 bar / max. 10 bar
Separator Motor
Type:
Frame size 132
Voltage:
440
Frequency:
60
Output:
8,6
Speed:
3600
Weight:
48
Feed Pump
Type:
Rated Capacity:
Suction Height:
Delivery Height:
Voltage:
Frequency:
Output:
Weight:
Set Points
bar
Volt
Hz
kW
rpm
kg
l/h
m Ws
m Ws
440 Volt
60 Hz
kW
kg
Adjustment
Inlet Temperature Controler TC
ID No.
*0-9-007
Inlet Temperature Alarm high TAH
*0-9-006
100 C
Inlet Temperature Alarm low TAL
*0-9-006
80 C
Water Pressure Reducer PCV
*9-7-003
3 -10 bar g
Pressure Alarm low PAL Clean Oil Discharge
*1-9-002
1 bar
Pressure Switch PSL Sludge Monitoring System
*1-9-003
1 bar for -91-/0136 0,5 bar for -0196-
Subject to technical modification
452946646
452946721
90 C
26.10.2010
Customer: DSME
Project-/Order-No.:
43223 / 452946646
Location:
Project-title:
OSE 20-0196
H1195/H1196
Equipment List
Order-No.:
452946646
Project - title:
OSE 20-0196
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Date: 05.12.2011
Dept.: 4420
Type:
Corr. Drawing: P452946646-9913-PID010
Belongs to:
Repl for: ---
Repl. by: ---
Std. checked: ---
Explanations:
Priority(A):
Procurement (B):
Scope of supply (C):
N = Obligatory
E = Recommended
P = Possible
U = ---
M = Must be obtained from Westfalia

K = May be obtained from Westfalia
Z = Supplied by client
V = ---
L = Scope of supply by WS
S = Supplied by client
F = to be removed
W = loose supply
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P452946646-9913-DVL010
4110-NIE.
Revison:
Page:
1/3
Customer: DSME
Project-/Order-No.:
43223 / 452946646
Location:
Project-title:
OSE 20-0196
H1195/H1196
Equipment List
ID
Quantity
Description
Usage
Size/Type
Nominal Bore
10-1-001
1 Stck
Separator
10-1-001/M1
1 Stck
Motor
10-7-005
1 Stck
Throttle Valve
Power
Part-No.
OSE 20-0196-067
Frame size 132
belongs to *0-7-006
0018-7621-110
Comments
PID Code
DN25
10-7-006
1 Stck

DN25
10-7-010
1 Stck
0331
0018-8133-600
10-7-011
1 Stck
0331
0018-8133-600
10-7-012
1 Stck
Pressure Gauge Cock
belongs to *0-1-001
TE
belongs to *0-7-006
1/4"
10-9-006
1 Stck
10-9-009
1 Stck
Flow Sensor
FI
0001-1701-600
10-9-010
1 Stck
TE
installed in Motor
10-9-011
1 Stck
Current Transformer
TAI 233
IAL
0005-0924-220
10-9-013
1 Stck
Water Detector
SK1-HT125-LO
CS
0005-1464-060
10-9-014
1 Stck
NAE
1/4"
PT
0005-1529-300
10-9-018
1 Stck
Proximity sensor
SIS
0005-0868-000
11-7-001
1 Stck
Non-Return Valve
0018-2990-650
2 x PT 100
1/2"
1"
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P452946646-9913-DVL010
4110-NIE.
Revison:
Page:
2/3
Customer: DSME
Project-/Order-No.:
43223 / 452946646
Location:
Project-title:
OSE 20-0196
H1195/H1196
Equipment List
ID
Quantity
Description
Usage
11-7-003
1 Stck
Pressure Gauge Cock
Size/Type
Nominal Bore
Power
Part-No.
belongs to *0-1-001
Comments
PID Code
1/4"
11-9-001
1 Stck
Pressure Gauge
213.40 / 0..40bar
1/4"
PI
0001-1572-600
11-9-002
1 Stck
NAE
1/4"
PT
0005-1529-300
12-7-001
1 Stck
Non-Return Flap
belongs to *0-7-006
belongs to *0-7-006
0018-1763-630/belongs
to *9-7-003
0018-7614-000
belongs to *9-7-003
belongs to *9-7-003
belongs to *9-7-003
0001-1572-600/belongs
to *9-7-003
DN 25
18-7-002
1 Stck
Solenoid Valve
1/4"
19-7-002
1 Stck
Ball Valve
3/4"
19-7-003
1 Stck

3/4"
19-7-004
1 Stck

1/2"
19-7-005
1 Stck

1/4"
19-8-001
1 Stck
Y-Strainer
3/4"
19-9-001
1 Stck
Pressure Gauge
213.40 / 0..10bar
PI
Checked Date:
Approved Date:
Document No.:
By:
By:
By:
P452946646-9913-DVL010
4110-NIE.
Revison:
Page:
3/3

Werner-Habig-Str. 1 - 59302 Oelde ( Germany ) - Phone +49 2522 77-0
Kunde
Customer
: -
Anlagenbezeichnung
Designation of plant
: -
Zeichnungsnummer
Drawing no.
: 8106-2004-059
Kommission
Internal order no.
: -
Hersteller (Firma)
Manufacturer (Company)
: GEA Westfalia Separator
Projektname
Name of project
: -
Typ
Type
: D10 / OSE 20-0196
Sprache
Language
: de/en
Technische Daten
Technical data
: 230V AC
Erstellt am
Prepared
: 07.10.2010
GEA Projektsachbearbeiter : M. Kalb

GEA project contact
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
60 Hz
Bearbeitet am
Processed
: 04.03.2011
Telefon
Telephone
: +49 2522 77-2802
GEA Westfalia
Separator
This document is COPYRIGHTED by GEA Westfalia Separator Production GmbH. All rights being reserved.
+/-5 %
Titel- / Deckblatt
Angewandte Normen:
Applied standards:
Rev.01 =
As built +
Sprache:
Language:
IEC 61346
IEC 61355
IEC 60617
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EAA
Bl./Sh.
1
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EAA
Titel- / Deckblatt
04.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
04.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
04.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
04.03.2011
GRO/PLE
&EAB
Inhaltsverzeichnis
Table of contents
04.03.2011
GRO/PLE
&EBH
Revisionsbersicht
Revision overview
04.03.2011
GRO/PLE
&EDB
Structure indicator
04.03.2011
GRO/PLE
&EDB
Informations-Blatt
Information-sheet
04.03.2011
GRO/PLE
&EDB
Informations-Blatt
Information-sheet
04.03.2011
GRO/PLE
&EFS
10
Einspeisung
Incoming
=0
04.03.2011
GRO/PLE
&EFS
11
=0
04.03.2011
GRO/PLE
&EFS
12
Not-Halt
Emergency stop
=0
04.03.2011
GRO/PLE
&EFS
13
Separator
Separator
=01
04.03.2011
GRO/PLE
&EFS
14
Separator
Separator
=01
04.03.2011
GRO/PLE
&EFS
15
=01
04.03.2011
GRO/PLE
&EFS
16
Separator Signale
Separator signals
=01
04.03.2011
GRO/PLE
&EFS
17
Separator Vibro
Separator vibro
=01
04.03.2011
GRO/PLE
&EFS
18
Separator Ventile
Separator valves
=01
04.03.2011
GRO/PLE
&EFS
19

=11
04.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EAB
Bl./Sh.
2
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EFS
20
=11
04.03.2011
GRO/PLE
&EFS
21
Signalaustausch
Signal exchange
=100
04.03.2011
GRO/PLE
&EFS
22
SPS bersicht
PLC overview
=00
04.03.2011
GRO/PLE
&EFS
23
PLC power supply
=00
04.03.2011
GRO/PLE
&EFS
24
SPS bersicht
PLC overview
=00
04.03.2011
GRO/PLE
&EFS
25
SPS bersicht
PLC overview
=00
04.03.2011
GRO/PLE
&EFS
26
SPS bersicht
PLC overview
=00
04.03.2011
GRO/PLE
&ELU
27
Aufbauplan
Arrangement drawing
04.03.2011
GRO/PLE
&ELU
28
Aufbauplan
Arrangement drawing
04.03.2011
GRO/PLE
&ELU
29
D10
D10
04.03.2011
GRO/PLE
&ELU
30
Not-Halt-Box
Energency stop box
04.03.2011
GRO/PLE
&ELU
31
Stromwandler
Current transformer
04.03.2011
GRO/PLE
&ELU
32
04.03.2011
GRO/PLE
&EMA
33
=0
04.03.2011
GRO/PLE
&EMA
34
=0
04.03.2011
GRO/PLE
&EMA
35
Klemmenplan =0+-24M
=0
04.03.2011
GRO/PLE
&EMA
36
Klemmenplan =0+-PE
=0
04.03.2011
GRO/PLE
&EMA
37
Klemmenplan =0+-SC
=0
04.03.2011
GRO/PLE
&EMA
38
Klemmenplan =0+-X1
=0
04.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EAB
Bl./Sh.
3
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EMA
39
Klemmenplan =0+-X2
=0
04.03.2011
GRO/PLE
&EMA
40
Klemmenplan =01+-X1
=01
04.03.2011
GRO/PLE
&EMA
41
Klemmenplan =01+-X2
=01
04.03.2011
GRO/PLE
&EMA
42
=01
+JB
04.03.2011
GRO/PLE
&EMA
43
=01
+JB
04.03.2011
GRO/PLE
&EMA
44
=01
+SB
04.03.2011
GRO/PLE
&EMA
45
=100
04.03.2011
GRO/PLE
&EMA
46
Klemmenplan =11+-X2
=11
04.03.2011
GRO/PLE
&EMB
47
Kabelbersicht
Cable layout
04.03.2011
GRO/PLE
&EMB
48
Kabelbersicht
Cable layout
04.03.2011
GRO/PLE
&EMB
49
04.03.2011
GRO/PLE
&EMB
50

04.03.2011
GRO/PLE
&EMB
51
04.03.2011
GRO/PLE
&EMC
52
04.03.2011
GRO/PLE
&EMC
53
04.03.2011
GRO/PLE
&EMC
54
04.03.2011
GRO/PLE
&EMC
55
04.03.2011
GRO/PLE
&EMC
56
04.03.2011
GRO/PLE
&EMC
57
04.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EAB
Bl./Sh.
4
67 Bl./Sh.
Inhaltsverzeichnis
Table of contents
Dokumentenart
Document type
Seite
Page
Date
Anlage
Plant
Einbauort
Mounting place
Datum
Date
Bearbeiter
Editor
&EMC
58
04.03.2011
GRO/PLE
&EMC
59
04.03.2011
GRO/PLE
&EMC
60
04.03.2011
GRO/PLE
&EMC
61
04.03.2011
GRO/PLE
&EMC
62
04.03.2011
GRO/PLE
&EMC
63
04.03.2011
GRO/PLE
&EMC
64
04.03.2011
GRO/PLE
&EPB
65
Stckliste
Parts list
04.03.2011
GRO/PLE
&EPB
66
Stckliste
Parts list
04.03.2011
GRO/PLE
&EPB
67
Stckliste
Parts list
04.03.2011
GRO/PLE
Date
Editor
Tested
Changes
Seitenbeschreibung
Page description
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Inhaltsverzeichnis
Table of contents
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EAB
Bl./Sh.
5
67 Bl./Sh.
Revisionsbersicht
Revision overview
Revisionsname
Revision name
Revisionskommentar
Revision comment
Rev.01
As built
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Revisionsnderungsgrund
Revision on the basis of change
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Revisionsbersicht
Revision overview
Seitenname
Page name
Ersteller
Author
Datum
Date
GRO/PLE
04.03.2011
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EBH
Bl./Sh.
6
67 Bl./Sh.
Structure indicator
Complete name
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Dokumentenart
Document type
Anlage
Plant
Anlage
Plant
Anlage
Plant
Anlage
Plant
Anlage
Plant
Anlage
Plant
Anlage
Plant
Anlage
Plant
Einbauort
Mounting place
Einbauort
Mounting place
Einbauort
Mounting place
&EAA
&EAB
&EBH
&EDB
&EFS
&ELU
&EMA
&EMB
&EMC
&EPB
=0
=00
=01
=100
=11
=Additions
=Customer
=MCC
+JB
+L
+SB
Date
Editor
Tested
Changes
Date
Name
Beschriftung
Labelling
04.03.2011
BEE/PLE
04.03.2011 KA
Complete name
Beschriftung
Labelling
Deckblatt
Cover sheet
Inhaltsverzeichnis
Table of contents
Revisionsbersicht
Revision overview
Strukturkennzeichen bersicht / Vorschriften
Structure indentification overview / instructions
Stromlaufplan
Circuit diagram
Aufbauplan
Arrangement drawing
Klemmenplan
Terminal connection diagram
Kabelbersicht
Cable layout
Klemmenanschlussplan
Terminal connecting plan
Stckliste
Parts list
Einspeisung
Incoming
SPS
PLC
Separator
Separator
Signalaustausch
Signal exchange
Zulaufpumpe
Feed pump
Zugabe
Addition
Kunde
Customer
Motorsteuerung
Motor starter
Abzweigdose
Junction box
Lokal
Local
Sensorblock
Sensor bloc
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Structure indicator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EDB
Bl./Sh.
7
67 Bl./Sh.
Vorschriften / Spezifikation
Instruction / specification
Schaltschrank :
Control cabinet :
Bezeichnung Schaltschrank
Name control cabinet
Ausfhrung:
Version:
CC
Aderkennzeichnung
Core indentification
YES
Lackierung Gehuse
Painting cabinet
Munsell 7.5 BG 7/2
Potentialbezeichnung
Potential designation
NO
Schutzart
Protective rating
IP54
Halogenfreie Verdrahtung / Kanle

Halogen free wiring / channels
YES
Umgebungstemperatur
Ambient temperature
~45 C
Kabelkennzeichnungsschilder
Cable marking plates
YES
Klassifizierung
Classification
...
Kennzeichnungsschilder
Marking plates
PLASTIC WHITE, LETTERS BLACK
Schnittstelle:
Interface:
Bus Verbindung zum Kunden PLC
Bus connection to customer PLC
NO
Einspeisung:
Incoming:
Netz-/ Anschlussspannung
Mains- / side voltage
230V AC
Netzfrequenz
Mains frequency
60 Hz
Drehfeld
Rotary field
CLOCKWISE ROTATION
Spannungstoleranz
Voltage tolerance
+/-5 %
Kabeleinfhrung
Cable inlet
BOTTOM
Einspeisung redundant
Incoming redundant
NO
Steuerspannungen:
Control voltages:
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Steuerspannung 1
Control voltage 1
230V AC
Steuerspannung 2
Control voltage 2
24V DC
Informations-Blatt
Information-sheet
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EDB
Bl./Sh.
8
67 Bl./Sh.
Verdrahtung
Wiring
Stromkreise
Electrical circuits
Leiter
Conductor
Hauptstromkreise
Main circuits
230V AC
L1
L2
L3
N
PE
Farbe
Colour
Schwarz
Black
Schwarz
Black
Schwarz
Black
Hellblau
Light blue
Grn / Gelb
Green / yellow
Querschnitt
Cross-section
Stromkreise
Electrical circuits
Steuerspannung
Control voltage
1,5mm
Leiter
Conductor
Farbe
Colour
Rot
Red
Rot / Wei
Red / white
Querschnitt
Cross-section
Rot
Red
Blau
Blue
Wei
White
Braun
Brown
Messleitung
Measuring circuit
Wei
White
0,75mm
Stromwandlerleitungen
Current transformer lines
Schwarz
Black
2,5mm
Verriegelungsleitungen (AC/DC)
Interlocking conductors (AC/DC)
Orange
0,75mm
230V AC
L
N
"
1,5mm
2,5mm
24V DC
+
-
Analog abgeschirmt
Analog screened
L+
M
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
0,75mm
"
"
Steuerspannung
Control voltage
Date
Editor
Tested
GEA Westfalia
Separator
Informations-Blatt
Information-sheet
"
0,75mm
"
Rev.01 =
As built +
Sprache:
Language:
0,75mm
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EDB
Bl./Sh.
9
67 Bl./Sh.
23
31
24
/21.1 32
13
230V AC
L1 / 11.0
N / 11.0
14
-S1
-F1
C 6A
Daten Einspeisung:
Data incoming:
-WD001
MPRXCX
2x2,5 mm
Date
Editor
Tested
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Filterlfter
Filter fan
GEA Westfalia
Separator
Umgebungstemperatur:
Ambient temperature:
~45 C
50 m
PE
PE
PE
-1M
-1T
-1G
U:
Einspeisung
Incoming
230V AC
60 Hz
f:
P:
Erdung Gehuse 1
Earthing cabinet 1
PE
M
1~
Erdung Tr 1
Earthing door 1
Einspeisung
Incoming
max. Kabellnge:
Max. Cable length:
Erdung Schirm
Earthing screen
=Customer
+L-X
Vorsicherung:
Pre-fuse:
L
N
L1
PE
19/18W
Schaltschranklfter
Cabinet fan
2,5 mm
-PE
-PE
-M1
Changes
-PE
-X1
-PE
4
-SC
3
-PE
GLAND
-X1
-PE
min. Querschnitt:
Min. Cross-section:
Icn:
Vollaststrom:
Full load current:
Rev.01 = 0
As built +
Sprache:
Language:
~2 A
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
10
67 Bl./Sh.
N/L2
230V AC
L1
10.9 / L1
10.9 / N
-T2
INPUT
GEA
power
-P1
x2
ON
OFF
x1
120/230VAC
24VDC/5A
A
B
M'
PE
L+'
L+
OUTPUT
M.A / 13.6
M.K / 22.0
M.R / 12.0
1
-24M
-PE
-PE
M.X / 18.0
24V DC
24V DC
24V DC
Steuerspannung DC
Control voltage DC
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
L+.A / 13.6
L+.K / 23.0
L+.X / 12.0
Spannungsversorgung
Power supply
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
11
67 Bl./Sh.
24V DC
11.9 / L+.X
24V DC
L+.X / 16.0
=00-K1
/24.4
E2.7
8
X10
11.9 / M.R
M.R / 14.0
GLAND
-X2
-PE
Brcke entfernen bei

Anschlu eines
externen Not-Halt!
Remove link in case of
an external
emergency stop!
-WG008
MPRXCX
2x1,5 mm
=MCC
PE
/13.0
PE
Separator
Not-Halt
Separator
emergency stop
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Not-Halt
Emergency stop
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
12
67 Bl./Sh.
Separatormotor
Separator motor
11.9 / L+.A
11.9 / M.A
24V DC
24V DC
L+.A / 14.0
M.A / 15.0
=MCC
/12.1
/14.1
/19.1
...V/50/60Hz
L1
L2
L3
=00-K1
-X2
AI0-I
X13
2
11
-WG006
MPRXCX
2x1,5 mm
4-20mA = 0-50A
/25.5
-X2
1
A1
A2
14
2
GLAND
-PE
PE
12
-K1
/14.4
-Q1
0-.../.../1A
S2
50/1A
-X1
8
output
0/4-20mA
A1
T1
input
0-1A
GLAND
-PE
PE
7+
9-
-B1
-X1
S1
-T1
*0_9_011
-WG007
MPRXCX
2x2,5 mm
-B2
-F1
A2
T2
-PE
M
3~
*0_1_001
...kW/...A
T1
T2
Separator
Separator
Date
Editor
Tested
Changes
Date
Name
PE
W1
V1
Linkslauf
Anti-clockwise rotation
U1
GEA_Westfalia_Separator
04.03.2011
BEE/PLE
04.03.2011 KA
PTC-Fhler
Separator
PTC-feeler
separator
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Separator
Separator
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
13
67 Bl./Sh.
13.9 / L+.A
24V DC
24V DC
=00-K1
L+.A / 15.0
=00-K1
/24.5
/24.5
E0.0
E0.1
2
X11
X11
=00-K1
/25.4
A1.0
A1
X12
A2
-K1
12.9 / M.R
M.R / 19.0
-X2
WG009 / 16.2
GLAND
21
20
-PE
WG009. / 16.3
-WG009
MPRXCX
4x1,5 mm
=MCC
14
11 /13.5
/13.0
PE
12
PE
Separator
Betrieb
Separator
operation
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Separator
Strung
Separator
failure
Kunde:
Customer:
Projekt:
Project:
Separator
Start/Stop
Separator
start/stop
GEA Westfalia
Separator
Separator
Separator
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
14
67 Bl./Sh.
14.9 / L+.A
13.9 / M.A
24V DC
24V DC
L+.A / 22.0
=00-K1
0-12000 r.p.m.
/24.5
E0.3
4+
X11
24VDC
-X2
2-
1+
5+
6-
-T2
-WG004
MPRXCX
7x1,5 mm
+JB
-1X10
*0_9_020
SI
-WG101
.-O
2x0,34 mm
+ BN = brown
- BU = blue
Drehzahlberwachung
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
15
67 Bl./Sh.
=00-K1
=00-K1
4-20mA
/25.5
4-20mA
/25.5
AI1-I
AI2-I
X13
=00-K1
X13
/24.5
E0.5
6
X11
24V DC
12.9 / L+.X
24V DC
L+.X / 19.0
14.1 / WG009
-WG004
MPRXCX
7x1,5 mm
GLAND
10
-X2
-PE
14.2 / WG009.
L+_1X10 / 17.1
PE
GLAND
-1X10
+JB
PE
-WG121
MPRXCX
4x1,5 mm
+SB
*1_9_002
*0_9_014
P
PSL/H
4-20mA
Reinoel
Ablaufdruck
Clean-oil
discharge pressure
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
A/Q
-WG203
.-O
3x0,75 mm
1
-WG202
.-O
2x0,34 mm
1
-WG201
.-O
2x0,34 mm
-1X20
PE_1X20 / 18.6
M_1X20 / 18.5
*0_9_013
P
SMS
4-20mA
WMS
Kunde:
Customer:
Projekt:
Project:
Wasserabfuhr
GEA Westfalia
Separator
Separator Signale
Separator signals
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
16
67 Bl./Sh.
=00-K1
/24.5
E1.7
-X2
11
16
X11
-WG011
MPRXCX
7x1,5 mm
+JB
16.3 / L+_1X10
M_1X10 / 18.3
-1X10
11
Reserve
Spare
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
10
Reserve
Spare
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Separator Vibro
Separator vibro
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
17
67 Bl./Sh.
=00-K1
=00-K1
=00-K1
=00-K1
/25.4
/25.4
/25.4
/25.4
/25.4
A0.2
A0.1
A0.4
A0.5
X12
6
X12
5
X12
X12
X12
=00-K1
A0.0
11.9 / M.X
19
GLAND
17
GLAND
10
PE
18
18
11
17
16
14
15
-PE
GLAND
13
-X2
12
-PE
-WG011
MPRXCX
7x1,5 mm
17.1 / M_1X10
14
PE
-PE
-1X10
PE
16
-PE
-PE
GLAND
13
GLAND
-1X10
12
-PE
15
+JB
-WG122
MPRXCX
3x1,5 mm
+SB
16.3 / M_1X20
16.3
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Verdrngungs- und
Fllwasser
Displacem- and
filling water
GEA Westfalia
Separator
PE
Separator Ventile
Separator valves
PE
*0_7_011
-
*0_7_010
PE
-WG205
.-J
3x0,75 mm
*9_7_005
Steuerwasser
Operating water
PE
-WG204
.-J
3x0,75 mm
Zulaufventil
Feed valve
PE
*9_7_004
-
*8_7_002
Date
Editor
Tested
-WG106
MPRXCX
2x1,5 mm
+
-WG105
MPRXCX
2x1,5 mm
+
-WG010
MPRXCX
2x1,5 mm
-1X20
PE_1X20
Kreislaufventil
Circulation valve
Wasserabfuhrventil
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
18
67 Bl./Sh.
24V DC
16.9 / L+.X
=00-K1
/24.5
E1.0
9
X11
14.9 / M.R
M.R / 21.0
GLAND
-X2
-PE
1
Brcke entfernen bei

Anschlu einer
Zulaufpumpe!
(Option)
Link remove at
connection of an feed
pump! (optional)
-WG005
MPRXCX
2x1,5 mm
=MCC
PE
/13.0
PE
Feed back feed pump
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator

Rev.01 = 11
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
19
67 Bl./Sh.
min / max
Min / max
=00-K1
4-20mA = 0-120C
/25.5
/25.5
AIR-P
16
X13
15
X13
AIR-N
SC
-X2
=0-SC
-SC
-WG003
.CY-O
4x1,5 mm
*0_9_006
PT100
2
PT100
Reserve
Spare
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
min / max
Min / max
Rev.01 = 11
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
20
67 Bl./Sh.
=00-K1
=00-K1
=00-K1
/25.4
/25.4
/25.4
/25.4
A1.3
A1.4
A1.5
14
A1
A1
A1
8
A1
A2
-K4
A2
-K3
A2
-K2
A2
-K1
X12
13
X12
12
X12
=00-K1
A0.7
X12
19.9 / M.R
Sammelstrung
Common failure
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GLAND
TAH Temperatur
Alarm max
TAH temperature
alarm max
GEA Westfalia
Separator
PE
-WG004
MPRXCX
2x1,5 mm
PE
-X
PE
7
GLAND
Wasserschlossalarm
14
12
11
11
-X
PE
-WG003
MPRXCX
2x1,5 mm
PE
-X
Kunde
3
-WG002
MPRXCX
2x1,5 mm
PE
=Customer
+L-X
/21.5
PE
GLAND
-X2
-K4
/21.3
-PE
-WG001
MPRXCX
2x1,5 mm
14
12
14
12
31
/10.1
-K3
/21.2
32
11
/21.1
12
12
-K2
=0-S1
11 /21.5
11 /21.3
12
14
12
12
-K1
14
14
11 /21.2
11
14
11 /21.0
GLAND
14
-X
TAL Temperatur
Alarm min
TAL temperature
alarm min
Signalaustausch
Signal exchange
Rev.01 = 100
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
21
67 Bl./Sh.
=00-K1
=00-K1
/25.5
/25.5
/25.5
/25.5
AI1-C
AI2-C
-
AI3-C
X13
X13
12
X13
X13
=00-K1
AI0-C
-
8
Name
=00-K1
24V DC
M.K / 23.0
Date
Editor
Tested
Date
/24.5
Masse Analog
Ground analog
Changes
=00-K1
E0.7
X11
15.9 / L+.A
11.9 / M.K
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Masse Analog
Ground analog
Masse Analog
Ground analog
GEA Westfalia
Separator
Masse Analog
Ground analog
SPS bersicht
PLC overview
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
22
67 Bl./Sh.
-K1
-X12
...
...
...
...
+1.7
+2.7
+0.7
+1.7
8
7
6
5
4
3
2
10
11
12
13
14
15
16
AI1-C
AI2-U
AI2-I
AI2-C
AI3-U
AI3-I
AI3-C
M ana
M ana
AIR-P
AIR-N
16
15
14
13
12
11
10
+2.0
+2.1
+2.2
+2.3
+2.4
+2.5
+2.6
+2.7
2L+
2L+
2M
3L+
3L+
3M
1L+
1M
13
12
11
10
9
8
7
6
5
4
3
2
1
-X1
L+
M
AT1
AT2
4
3
2
1
1M /24.4
X10:16
1L+ /24.4
X10:15
3M /24.4
X10:14
3L+ /24.4
X10:12
X10:11
X10:9
2M /24.4
DO/DI 24VDC
Pover Supply
2L+ /24.4
6
M ana
AO1-I
4
AO1-U
M ana
2
AO0-I
AO0-U
L+
AT2
Digital Input 24VDC
X1:4
X1:3
X1:2
X1:1
AT1
Analog Output
-X10
14
-PE
Date
Editor
Tested
Name
PT100
11.9 / L+.K
22.9 / M.K
Date
10
-X14
A
B
SC
Changes
11
AI1-I
3
AI0-C
Analog Input
A
B
SC
12
AI1-U
2
AI0-I
X2/MPI
-X13
AI0-U
A
B
SC
13
15
PE
A
B
SC
DI +0.0
DI +0.0
DO +0.0
DO +1.0
14
16
X10:PE
1L+
=
1M
=
2L+,2M=
3L+,3M=
X5/P-BUS
15
Input 24VDC, 4A
MMC
-X7
+1.7
+1.6
+1.5
+1.4
+1.3
+1.2
+1.1
+1.0
+0.7
+0.6
+0.5
+0.4
+0.3
+0.2
+0.1
+0.0
16
Digital Output 24VDC 0,5A
+1.7
+1.6
+1.5
+1.4
+1.3
+1.2
+1.1
+1.0
+0.7
+0.6
+0.5
+0.4
+0.3
+0.2
+0.1
+0.0
-X11
Digital Input 24VDC
6ES7613-1SB02-0AC0
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
PLC power supply
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
23
67 Bl./Sh.
-K1
X10:1
X10:2
X10:3
X10:4
X10:5
X10:6
X10:7
Separator Not-Halt
24V
=0-T2:L+
/12.1
/23.5
X10:8
X10:9
X10:10
0V
/23.5
24V
/23.5
X10:11
X10:12
X10:13
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
0V
/23.5
24V
/23.5
0V
/23.5
X10:14
X10:15
X10:16
E2.0
E0.0
E2.1
E0.1
E2.2
E0.2
E2.3
E0.3
E2.4
E0.4
E2.5
E0.5
E2.6
E0.6
E2.7
E0.7
2L+
E1.0
2L+
E1.1
2M
E1.2
3L+
E1.3
3L+
E1.4
3M
E1.5
1L+
E1.6
1M
E1.7
GEA Westfalia
Separator
SPS bersicht
PLC overview
X11:1
X11:2
/14.1
=01-X2:20
Separator Strung
Separator failure
/14.2
=01-X2:21
Separator Strung
Separator failure
/15.2
=01-T2:4+
Drehzahlberwachung
/16.3
=01-X2:10
Wasserabfuhr
/22.1
=01-T2:5+
/19.1
=MCC
Separator Strung
Separator failure
/17.4
=01-X2:11
Reserve
Spare
X11:3
X11:4
X11:5
X11:6
X11:7
X11:8
X11:9
X11:10
X11:11
X11:12
X11:13
X11:14
X11:15
X11:16
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
24
67 Bl./Sh.
-K1
Zulaufventil
Feed valve
=01-X2:12
/18.1

=01-X2:15
/18.4
Steuerwasser
Operating water
=01-X2:14
/18.3
X12:1
X12:2
X12:3
X12:4
Kreislaufventil
Circulation valve
=01-X2:17
/18.5
Wasserabfuhrventil
=01-X2:18
/18.6
X12:5
X12:6
X12:7
Sammelstrung
Common failure
=100-K1:A1
/21.1
X12:8
A0.0
AI0-U
A0.1
AI0-I
A0.2
AI0-C
A0.3
A0.4
AI1-U
AI1-I
A0.5
AI1-C
A0.6
V
AI2-U
AI2-I
A0.7
AI2-C
-
Separator Start/Stop
Separator start/stop
=01-K1:A1
/14.4
X12:9
X12:10
X12:11
Wasserschlossalarm
=100-K2:A1
/21.2

=100-K3:A1
/21.3

=100-K4:A1
/21.5
X12:12
X12:13
X12:14
X12:15
X12:16
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
AI3-U
AI3-I
A1.0
A1.1
AI3-C
X13:1
X13:2
X13:3
/13.7
=01-T1:8
Masse Analog
Ground analog
/22.2
X13:4
X13:5
X13:6
/16.1
=01-X2:6
/22.3
-K1:3
/16.2
=01-X2:8
Reinoel Ablaufdruck
Masse Analog
Ground analog
X13:7
X13:8
X13:9
/22.4
Masse Analog
Ground analog
/22.5
Masse Analog
Ground analog
X13:10
X13:11
X13:12
A1.2
A1.3
MANA
A1.4
Mana
X13:13
X13:14
A1.5
A1.6
AIR-P
PT100
A1.7
GEA Westfalia
Separator
AIR-N
SPS bersicht
PLC overview
X13:15
X13:16
/20.6
=11-X2:5

/20.6
=11-X2:6

Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
25
67 Bl./Sh.
-K1
AO0-U
AO0-I
MANA
X14:1
X14:2
X14:3
X14:4
AO1-I
MANA
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
SPS bersicht
PLC overview
X14:5
X14:6
Rev.01 = 00
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EFS
Bl./Sh.
26
67 Bl./Sh.
410 mm
380 mm
54 mm
Terminals
=00-K1
PE
Cable
route
Terminals
PE
=0-S1
=0-P1
=0-M1
pocket for circuit diagram
10 mm
NO. _ LO-ME PURIFIER

CONTROL PANEL
600 mm
582 mm
360 mm
350 mm
Cabinet
Custody
space
for key
330
150
M10
=00-K1
=0-M1
=0-P1
=0-S1
27
Steuergert Timing unit

Filter / Lfter Filter / fan
Spannungsversorgung Power supply
Hauptschalter Isolator
36
54
15
10,2
Mastab 1:4,5 mm
Scale 1:4,5 mm
LO-ME 1/2
Gewicht: ca. 30kg

Weight: ca. 30kg
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Aufbauplan
Arrangement drawing
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& ELU
Bl./Sh.
27
67 Bl./Sh.
Mountingplate
37x75
=01-T2
=01-T1
=01-K1
=100-K1
=100-K2
=100-K3
=100-K4
=0-F1
=0-T2
=0-24M
37x75
=11-X2
=100-X2
37x75
PE
37x75
=01-X2
=01-X1
=0-X2
=0-X1
37x75
37x75
PE
Date
Editor
Tested
Changes
Date
Name
Cable glands
Yard cable size
8x M20
6x M20
3x M20
10,0 - 12,5mm
12,0 - 14,5mm
Spare
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
0005-4515-600
0005-4516-600
0005-4443-630
GEA Westfalia
Separator
Aufbauplan
Arrangement drawing
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& ELU
Bl./Sh.
28
67 Bl./Sh.
Regelung Gert D10

Control unit D10
Taste
Button
Prozess Stop
Process stop
Prozess Start
Process start
Lampentest
Lamp test
Serienbetrieb
Series operation
Hilfe
Help
Separator
Separator
Zulauf
Feed
Schlamm
Sludge
1
2
3
4
S
F2
F3
F4
165
F1
6
7
SF
DC5V
ESC
FRCE
RUN
STOP
EDIT
202x155mm
Tiefe:
depth:
88mm
Gewicht:
weight:
1,35kg
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
PID
Zurck
Return
Process
STOP
Process
START
LAMPTEST
SERIES
1
D10
D10
FEED
SLUDGE
PID
HOME
DIR
Bestell-nr.
order no.
0005-4050-430
Programm-Nr.
program-no.
8106-0D10-101
Rev.01 =
As built +
Sprache:
Language:
HELP
ENTER
215
Ausschnittmass:
cutout dimension:
Symbol
Symbol
Benennung
Designation
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& ELU
Bl./Sh.
29
67 Bl./Sh.
Not-Halt Gehuse mit Schutzkragen

Emergency stop cabinet with protective collar
=Additions
-S01
71 mm
54 mm
85 mm
Not-Halt-Box
m
5
109 mm
85 mm
61 mm
protection class: "IP 65"
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Note: Installation should be carry out by customer!
18 mm
M20
8-13mm
GEA Westfalia
Separator
Not-Halt-Box
Energency stop box
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& ELU
Bl./Sh.
30
67 Bl./Sh.
Stromwandler
Current transformer
(TAID)
42
=Additions
-B1
84
50/1A
Stromwandler
Current transformer
60
57
56
4mm
5,5
50
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stromwandler
Current transformer
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& ELU
Bl./Sh.
31
67 Bl./Sh.
(3RN10 10)
=Additions
-F1
91
22,5
5
A1
T1
86
A1 / A2 =
T2
T1 / T2 =
95 / 96 =
80
74
95
96
97
98
A2
10
10
90
62
97 / 98 =
Spannungsversorgung
power supply
PTC
PTC
Schliesser
NO-contact
Oeffner
NC-contact
28
57
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& ELU
Bl./Sh.
32
67 Bl./Sh.
SC
SC
SC
SC
SC
SC
SC
SC
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Kabeltyp
Cable type
Kabeltyp
Cable type
GLAND
-PE
&EFS/10.1
-WG008
SC
GLAND
-PE
&EFS/12.2
=01-WG006
SC
GLAND
-PE
&EFS/13.4
=01-WG007
SC
GLAND
-PE
&EFS/13.4
=01-WG009
SC
GLAND
-PE
&EFS/14.3
GLAND
GLAND
-PE
&EFS/16.3
SC
GLAND
-PE
&EFS/18.2
GLAND
GLAND
-PE
&EFS/18.7
=11-WG005
SC
GLAND
-PE
&EFS/19.2
=100-WG001
SC
GLAND
-PE
&EFS/21.1
=01+JB-1X10_GLAND
=01-WG010
=01+JB-1X10_GLAND
GEA Westfalia
Separator
Zielbezeichnung
Target designation
Kabelname
Cable name
SC
Brcke
Link
-WD001
Zielbezeichnung
Target designation
Anschluss
Connection
=0+-GLAND
Klemme
Terminal
SC
Kabelname
Cable name
MPRXCX 2x2,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x2,5 mm
MPRXCX 4x1,5 mm
MPRXCX 7x1,5 mm
MPRXCX 2x1,5 mm
SC
Date
Editor
Tested
Name
Anschluss
Connection
Einspeisung
Incoming
Separator Not-Halt
Separator Aus
Separator off
Ejection monitoring
Separator Strung
Separator failure
Wasserabfuhr
Zulaufventil
Feed valve
Wasserabfuhrventil
Feed back feed pump
Sammelstrung
Common failure
Date
=100
WG001
=11
WG005
=01
WG011
=01
WG010
=01
WG004
=01
WG009
=01
WG007
=01
WG006
=0
WG008
=0
WD001
Funktionstext
Function text
Changes
MPRXCX 7x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / Column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
33
67 Bl./Sh.
SC
SC
Date
Editor
Tested
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Kabeltyp
Cable type
Kabeltyp
Cable type
GLAND
-PE
&EFS/21.2
=100-WG003
SC
GLAND
-PE
&EFS/21.4
=100-WG004
SC
GLAND
-PE
&EFS/21.5
GEA Westfalia
Separator
Zielbezeichnung
Target designation
Kabelname
Cable name
SC
Brcke
Link
=100-WG002
Zielbezeichnung
Target designation
Anschluss
Connection
=0+-GLAND
Klemme
Terminal
SC
Anschluss
Connection
Wasserschlossalarm
Kabelname
Cable name
=100
WG004
=100
WG003
=100
WG002
Funktionstext
Function text
Changes
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / Column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
34
67 Bl./Sh.
Kabeltyp
Cable type
Kabeltyp
Cable type
-T2
&EFS/11.6
-PE
PE
=01-K1
A2
&EFS/11.6
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-24M
Zielbezeichnung
Target designation
Kabelname
Cable name
13
Zielbezeichnung
Target designation
Anschluss
Connection
=01-X2
Funktionstext
Function text
Brcke
Link
Klemme
Terminal
Steuerspannung DC
Control voltage DC
Kabelname
Cable name
Anschluss
Connection
=0+-24M
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / Column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
35
67 Bl./Sh.
Kabeltyp
Cable type
Kabeltyp
Cable type
-PE
&EFS/10.3
-M1
PE
PE
-PE
&EFS/10.5
-1M
PE
PE
-PE
&EFS/10.6
-1T
PE
PE
-PE
&EFS/10.6
-1G
PE
PE
-PE
&EFS/10.6
-PE
PE
-T2
PE
&EFS/11.6
-PE
PE
-24M
&EFS/11.6
Steuergert
Timing unit
-PE
PE
=00-K1
X10:PE
&EFS/23.6
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-PE
Zielbezeichnung
Target designation
Kabelname
Cable name
PE
Erdung Schirm
Earthing screen
Filterlfter
Filter fan
Erdung Tr 1
Earthing door 1
Erdung Gehuse 1
Earthing cabinet 1
Steuerspannung DC
Control voltage DC
Zielbezeichnung
Target designation
Anschluss
Connection
SC
Funktionstext
Function text
Brcke
Link
Klemme
Terminal
-SC
Kabelname
Cable name
Anschluss
Connection
=0+-PE
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / Column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
36
67 Bl./Sh.
Changes
Date
Name
SC
-SC
&EFS/10.3
=11-X2
SC
SC
-SC
&EFS/20.7
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-SC
Kabelname
Cable name
PE
Zielbezeichnung
Target designation
Anschluss
Connection
Klemme
Terminal
-PE
Zielbezeichnung
Target designation
Brcke
Link
Anschluss
Connection
Erdung Schirm
Earthing screen
Date
Editor
Tested
=0+-SC
Kabelname
Cable name
Funktionstext
Function text
Kabeltyp
Cable type
Kabeltyp
Cable type
Rev.01 = 0
As built +
Sprache:
Language:
Seite / Spalte
Page / Column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
37
67 Bl./Sh.
Kabeltyp
Cable type
=Customer+L-X
L1
-F1
&EFS/10.1
=Customer+L-X
-F1
&EFS/10.1
-S1
13
&EFS/10.4
Reserve
Spare
Filterlfter
Filter fan
=
-M1
-M1
Seite / Spalte
Page / Column
&EFS/10.4
-S1
23
&EFS/10.5
Date
Editor
Tested
Changes
Zielbezeichnung
Target designation
Kabelname
Cable name
Zielbezeichnung
Target designation
Anschluss
Connection
Einspeisung
Incoming
Funktionstext
Function text
Brcke
Link
Klemme
Terminal
=0+-X1
Anschluss
Connection
Kabeltyp
Cable type
Kabelname
Cable name
MPRXCX 2x2,5 mm
=0
WD001
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =0+-X1
&EFS/10.5
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
38
67 Bl./Sh.
Separator Not-Halt
Separator Not-Halt
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
=MCC-X
=MCC-X
GEA Westfalia
Separator
Klemmenplan =0+-X2
Zielbezeichnung
Target designation
-T2
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Anschluss
Connection
=0+-X2
Kabelname
Cable name
Kabeltyp
Cable type
Kabeltyp
Cable type
Funktionstext
Function text
Kabelname
Cable name
MPRXCX 2x1,5 mm
=0
WG008
Seite / Spalte
Page / Column
L+
=01-X2
=00-K1
X10:8
&EFS/12.1
&EFS/12.1
Rev.01 = 0
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
39
67 Bl./Sh.
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Anschluss
Connection
=01+-X1
Kabelname
Cable name
Kabeltyp
Cable type
Kabeltyp
Cable type
Funktionstext
Function text
Kabelname
Cable name
MPRXCX 2x2,5 mm
=01
WG007
Seite / Spalte
Page / Column
Ejection monitoring
=MCC-X_
-T1
&EFS/13.4
=MCC-X_
-T1
&EFS/13.4
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Klemmenplan =01+-X1
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
40
67 Bl./Sh.
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=01+-X2
Anschluss
Connection
Funktionstext
Function text
Kabelname
Cable name
=01
WG010
=01
WG011
=01
WG009
=01
WG004
=01
WG006
MPRXCX 2x1,5 mm
MPRXCX 7x1,5 mm
MPRXCX 4x1,5 mm
MPRXCX 7x1,5 mm
MPRXCX 2x1,5 mm
Seite / Spalte
Page / Column
Separator Aus
Separator off
=MCC-X_
-K1
11
&EFS/13.4
=MCC-X_
-K1
12
&EFS/13.4
Drehzahlberwachung
+JB-1X10
-T2
1+
&EFS/15.2
+JB-1X10
-T2
2-
&EFS/15.2
Reinoel Ablaufdruck
+JB-1X10
=0-X2
&EFS/16.1
+JB-1X10
=00-K1
X13:5
&EFS/16.1
Separator Betrieb
Separator operation
Separator Strung
Separator failure
Wasserabfuhr
Reserve
Spare
Zulaufventil
Feed valve
1
5
2
=00-K1
X13:8
&EFS/16.2
=11-X2
&EFS/16.3
10
=00-K1
X11:6
&EFS/16.3
+JB-1X10
10
11
=00-K1
X11:16
&EFS/17.4
-*8_7_002
12
=00-K1
X12:1
&EFS/18.1
-*8_7_002
13
=0-24M
&EFS/18.1
+JB-1X10
12
14
=00-K1
X12:3
&EFS/18.3
+JB-1X10
15
15
=00-K1
X12:2
&EFS/18.4
16
Kreislaufventil
Circulation valve
Wasserabfuhrventil
=
Betrieb
operation
Strung
failure
Date
Editor
Tested
Changes
Separator
Separator
Separator
Separator
&EFS/16.2
+JB-1X10
Steuerwasser
Operating water
+JB-1X10
=MCC
=MCC
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
&EFS/18.4
+JB-1X10
16
17
=00-K1
X12:5
&EFS/18.5
+JB-1X10
18
18
=00-K1
X12:6
&EFS/18.6
+JB-1X10
17
19
&EFS/18.7
=MCC
20
=00-K1
X11:1
&EFS/14.1
=MCC
21
=00-K1
X11:2
&EFS/14.2
GEA Westfalia
Separator
Klemmenplan =01+-X2
Rev.01 = 01
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
41
67 Bl./Sh.
Steuerwasser
Operating water
Wasserabfuhr
Drehzahlberwachung
PE
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=01+JB-1X10
MPRXCX 7x1,5 mm
MPRXCX 7x1,5 mm
=01
WG004
=01
WG011
Anschluss
Connection
Funktionstext
Function text
Kabelname
Cable name
=01
WG122
=01
WG106
=01
WG105
=01
WG121
=01
WG101
.-O 2x0,34 mm
MPRXCX 4x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 3x1,5 mm
Seite / Spalte
Page / Column
-PE
&EFS/18.3
PE
&EFS/16.4
BN
-*0_9_020
-X2
&EFS/15.2
BU
-*0_9_020
-X2
&EFS/15.2
Reinoel Ablaufdruck
+SB-1X20
-X2
&EFS/16.1
+SB-1X20
-X2
&EFS/16.1
=
Wasserabfuhr
Reserve
Spare
&EFS/16.1
+SB-1X20
-X2
&EFS/16.2
+SB-1X20
-X2
10
&EFS/16.3
&EFS/17.1
&EFS/17.3
10
11
-X2
11
&EFS/17.4
&EFS/17.1
Steuerwasser
Operating water
-*9_7_004
12
-*9_7_004
13
&EFS/18.3
&EFS/18.4
-X2
14
&EFS/18.3

-*9_7_005
14
-*9_7_005
15
-X2
15
&EFS/18.4
+SB-1X20
16
-X2
17
&EFS/18.5
+SB-1X20
10
17
-X2
19
&EFS/18.7
+SB-1X20
11
18
-X2
18
&EFS/18.6
PE
-PE
Kreislaufventil
Circulation valve
Wasserabfuhrventil
=
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
&EFS/18.4
Rev.01 = 01
As built + JB
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
42
67 Bl./Sh.
SC
SC
SC
Date
Editor
Tested
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
Kabeltyp
Cable type
Kabeltyp
Cable type
=0-GLAND
GLAND
+SB-1X20
PE:PE
GLAND
=0-GLAND
GLAND
-WG105
SC
GLAND
-PE
&EFS/18.3
-WG106
SC
GLAND
-PE
&EFS/18.4
GEA Westfalia
Separator
=01
WG004
=01
WG011
GLAND
Zielbezeichnung
Target designation
Kabelname
Cable name
PE:PE
Brcke
Link
+SB-1X20
Zielbezeichnung
Target designation
Anschluss
Connection
=01+JB-1X10_GLAND
MPRXCX 7x1,5 mm
MPRXCX 7x1,5 mm
Klemme
Terminal
SC
Anschluss
Connection
Wasserabfuhr
Wasserabfuhrventil
Steuerwasser
Operating water
Kabelname
Cable name
=01
WG106
=01
WG105
=01
WG122
=01
WG121
Funktionstext
Function text
Changes
MPRXCX 4x1,5 mm
MPRXCX 3x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
SC
&EFS/16.3
SC
&EFS/18.7
Rev.01 = 01
As built + JB
Sprache:
Language:
Seite / Spalte
Page / Column
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
43
67 Bl./Sh.
Kabeltyp
Cable type
+JB-1X10
&EFS/16.1
BK
-*1_9_002
+JB-1X10
&EFS/16.1
=01
WG121
=01
WG122
Kabelname
Cable name
Zielbezeichnung
Target designation
Anschluss
Connection
-*1_9_002
Zielbezeichnung
Target designation
Brcke
Link
Klemme
Terminal
WH
Funktionstext
Function text
Kabelname
Cable name
Reinoel Ablaufdruck
=01
WG205
=01
WG204
=01
WG203
=01
WG202
=01
WG201
Anschluss
Connection
=01+SB-1X20
MPRXCX 3x1,5 mm
MPRXCX 4x1,5 mm
Kabeltyp
Cable type
.-O 2x0,34 mm
.-O 2x0,34 mm
.-O 3x0,75 mm
.-J 3x0,75 mm
.-J 3x0,75 mm
Seite / Spalte
Page / Column
WH
-*0_9_014
BK
-*0_9_014
+JB-1X10
&EFS/16.2
+JB-1X10
&EFS/16.3
&EFS/16.2
Wasserabfuhr
BK
-*0_9_013
A/Q
BN
-*0_9_013
&EFS/16.3
GY
-*0_9_013
&EFS/16.3
Kreislaufventil
Circulation valve
BN
-*0_7_010
BU
-*0_7_010
+JB-1X10
16
&EFS/18.5
&EFS/18.5
Wasserabfuhrventil
BN
-*0_7_011
10
+JB-1X10
17
&EFS/18.7
BU
-*0_7_011
11
+JB-1X10
18
&EFS/18.6
-*0_7_010
PE
PE
+JB-1X10_GLAND
GLAND
-*0_7_011
PE
PE
+JB-1X10_GLAND
GLAND
Kreislaufventil
Circulation valve
Wasserabfuhrventil
PE
PE
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
SC
SC
&EFS/18.7
Rev.01 = 01
As built + SB
Sprache:
Language:
&EFS/18.6
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
44
67 Bl./Sh.
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=100+-X2
Anschluss
Connection
Funktionstext
Function text
Kabelname
Cable name
=100
WG004
=100
WG003
=100
WG002
=100
WG001
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
MPRXCX 2x1,5 mm
Seite / Spalte
Page / Column
Sammelstrung
Common failure
=Customer+L-X
-K1
11
&EFS/21.1
=Customer+L-X
-K1
14
&EFS/21.1
Wasserschlossalarm
=Customer+L-X
-K2
11
&EFS/21.2
=Customer+L-X
-K2
14
&EFS/21.2

=Customer+L-X
-K3
11
&EFS/21.3
=Customer+L-X
-K3
14
&EFS/21.4

=Customer+L-X
-K4
11
&EFS/21.5
=Customer+L-X
-K4
14
&EFS/21.5
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 = 100
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
45
67 Bl./Sh.
Kabeltyp
Cable type
Zielbezeichnung
Target designation
Anschluss
Connection
Brcke
Link
Klemme
Terminal
Zielbezeichnung
Target designation
Kabelname
Cable name
Kabeltyp
Cable type
=11+-X2
Anschluss
Connection
=11
WG003
=11
WG005
Funktionstext
Function text
Kabelname
Cable name
MPRXCX 2x1,5 mm
.CY-O 4x1,5 mm
Seite / Spalte
Page / Column
Feed back feed pump
=MCC
=01-X2
&EFS/19.1
=MCC
=00-K1
X11:9
&EFS/19.1
Reserve
Spare
-*0_9_006
&EFS/20.5
-*0_9_006
&EFS/20.5
-*0_9_006
=00-K1
X13:15
&EFS/20.6
-*0_9_006
=00-K1
X13:16
&EFS/20.6
SC
SC
=0-SC
SC
&EFS/20.7

=
SC
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
-WG003
GEA Westfalia
Separator
Klemmenplan =11+-X2
Rev.01 = 11
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMA
Bl./Sh.
46
67 Bl./Sh.
Kabelbersicht
Cable layout
Kabelname
Cable name
/Seite.Pfad
/page.path
Ziel (bis)
Target (up to)
Kabeltyp
Cable type
Adern gesamt
Wires total
Adern
verwendet
Wires used
Querschnitt
Cross-section
Lnge
Length
=0-WD001
&EFS/10.1
=0-GLAND;=0-X1
=Customer+L-X
MPRXCX
2x
2,5 mm
M20x1,5 / 12-14,5mm
=0-WG008
&EFS/12.1
=0-GLAND;=0-X2
=MCC-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG004
&EFS/15.1
=0-GLAND;=01-X2
=01+JB-1X10_GLAND;
=01+JB-1X10
MPRXCX
7x
1,5 mm
M20x1,5 / 12-14,5mm
=01-WG006
&EFS/13.4
=0-GLAND;=01-X2
=MCC-X_
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG007
&EFS/13.4
=0-GLAND;=01-X1
=MCC-X_
MPRXCX
2x
2,5 mm
M20x1,5 / 12-14,5mm
=01-WG009
&EFS/14.1
=0-GLAND;=01-X2
=MCC
MPRXCX
4x
1,5 mm
M20x1,5 / 12-14,5mm
=01-WG010
&EFS/18.1
=0-GLAND;=01-X2
=01-*8_7_002
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG011
&EFS/18.3
=0-GLAND;=01-X2
=01+JB-1X10_GLAND;
=01+JB-1X10
MPRXCX
7x
1,5 mm
M20x1,5 / 12-14,5mm
=01-WG101
&EFS/15.1
=01+JB-1X10
=01-*0_9_020
.-O
2x
0,34 mm
M12x1,5 / 3-6mm
=01-WG105
&EFS/18.3
=01+JB-1X10;
=01+JB-1X10_GLAND
=01-*9_7_004
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG106
&EFS/18.4
=01+JB-1X10;
=01+JB-1X10_GLAND
=01-*9_7_005
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=01-WG121
&EFS/16.1
=01+JB-1X10;
=01+JB-1X10_GLAND
=01+SB-1X20
MPRXCX
4x
1,5 mm
M20 Z14 / 12-14,5mm
=01-WG122
&EFS/18.5
=01+JB-1X10;
=01+JB-1X10_GLAND
=01+SB-1X20
MPRXCX
3x
1,5 mm
M20 Z14 / 12-14,5mm
=01-WG201
&EFS/16.1
=01+SB-1X20
=01-*1_9_002
.-O
2x
0,34 mm

block
=01-WG202
&EFS/16.2
=01+SB-1X20
=01-*0_9_014
.-O
2x
0,34 mm

block
=01-WG203
&EFS/16.3
=01+SB-1X20
=01-*0_9_013
.-O
3x
0,75 mm

block
=01-WG204
&EFS/18.5
=01+SB-1X20
=01-*0_7_010
.-J
3x
0,75 mm

block
=01-WG205
&EFS/18.6
=01+SB-1X20
=01-*0_7_011
.-J
3x
0,75 mm

block
=100-WG001
&EFS/21.1
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
Date
Editor
Tested
Changes
Quelle (von)
Source (from)
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Kabelbersicht
Cable layout
Rev.01 =
As built +
Sprache:
Language:
Bemerkung
Remark
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMB
Bl./Sh.
47
67 Bl./Sh.
Kabelbersicht
Cable layout
Kabelname
Cable name
/Seite.Pfad
/page.path
Ziel (bis)
Target (up to)
Kabeltyp
Cable type
Adern gesamt
Wires total
Adern
verwendet
Wires used
Querschnitt
Cross-section
Lnge
Length
=100-WG002
&EFS/21.2
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=100-WG003
&EFS/21.3
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=100-WG004
&EFS/21.5
=0-GLAND;=100-X2
=Customer+L-X
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
=11-WG003
&EFS/20.5
=11-X2
=11-*0_9_006
.CY-O
4x
1,5 mm
M20x1,5 / 12-14,5mm
=11-WG005
&EFS/19.1
=0-GLAND;=11-X2
=MCC
MPRXCX
2x
1,5 mm
M20x1,5 / 10-12,5mm
Date
Editor
Tested
Changes
Quelle (von)
Source (from)
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Kabelbersicht
Cable layout
Rev.01 =
As built +
Sprache:
Language:
Bemerkung
Remark
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMB
Bl./Sh.
48
67 Bl./Sh.
Klemmenkasten Separator -1X10

Terminal box separator -1X10
Sensorblock -1X20
Sensor bloc -1X20
Verschraubung
Cable gland
Schaltschrank
Control cabinet
+JB-1X10
PE
-X2
PE
+
S
+
-
blue
blue
11
brown
PE
PE
PE
PE
brown
10
PE
Verdraengungs-u. fuellwasser
displacem. a. filling water
P
I
2x0,34mm
-WG202
3x0,75mm
-WG203
PSL/H Reinoel
Ablaufdruck
PSL/H clean oil
discharge pressure
SMS Schlammraumueberwachung
SMS sludge space monitoring
Wasserabfuhr
water monitoring system
grey
2x1,5mm
-WG106
brown
PE
Steuerwasser
operating water
black
2x0,34mm
-WG201
black
white
2x1,5mm
-WG105
black
blue
white
+
blue
brown
PE
19
18
18
-WG122
3x1,5mm
M20 (10-12,5mm)
17
17
16
-WG121
4x1,5mm
M20 (12-14,5mm)
15
16
14
15
+SB-1X20
1
brown
13
14
-WG011
7x1,5mm
M20 (12-14,5mm)
12
13
11
12
2
Drehzahlueberwachung
speed monitoring device
10
11
10
8
+
2x0,34mm
-WG101
blue
-WG004
7x1,5mm
M20 (12-14,5mm)
brown
2
1
PE
3x0,75mm
-WG204
3x0,75mm
-WG205
Kreislaufventil
circulation valve
Wasserabfuhrventil
water discharge valve
2
3
PE
Verschraubung
Cable gland
PE
Bestell-Nr.:0005-1827-280
order-no.:0005-1827-280
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMB
Bl./Sh.
49
67 Bl./Sh.
Hinweise zur Installation von Kabeln und Leitungen

Directions for installation from cables and conductors
*
Schutzmanahmen nach Bestimmungen des VDE bzw. zustndigen EVU ausfhren!

All protective measures are to be taken in accordance with electric codes, rules and regulations!
Generell sind die Vorgaben des lokalen Energieversorgers zwingend einzuhalten

In general the the rules and regulations of the lokal power authorities has to be followed.
Kabel und Leitungen sind so auszuwhlen und zu verlegen, dass eine Gefhrdung von Personen und der Umgebung ausgeschlossen ist.
Die angegebenen Kabelquerschnitte sind bezogen auf eine Kabellnge von 50m, Kupfer als Leitematerial, Verlegeart "C" und
eine maximale Umgebungstemperatur von 30C. Siehe hierzu DIN VDE 0298-4 (Verwendung von Kabeln und isolierten Leitungen fr Starkstromanlagen - Teil 4:
Empfohlene Werte fr die Strombelastbarkeit von Kabeln und Leitungen fr feste Verlegung in und an Gebuden und von flexiblen Leitungen).
Neben der Strombelastung sind bei der Errichtung von Kabel- und Leitungsanlagen weitere Faktoren zu bercksichtigen.
Siehe hierzu IEC 60364-5-52 (Errichten von Niederspannungsanlagen - Teil 5: Auswahl und Errichtung elektrischer Betriebsmittel - Kapitel 52: Kabel- und Leitungsanlagen)
Cables and lines must be selected and laid in a way to eliminate any risk to persons and the environment.
The cable cross-sections specified in these drawings are based on a max. length of 50m, copper as conducting material,laying version "C" and a maximum ambient temperature of 30C.
Refer also to DIN VDE 0298-4 (Usage of cables and cords in power installations - Part 4:
Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords).
Besides the current load are in the erection of wiring systems additional parameters to take into account.
Refer also to IEC 60364-5-52 (Erection of low voltage installations - Part 5: Selection and erection of electrical equipment - Chapter 52: Wiring systems)
Messleitungen sind grundstzlich abgeschirmt zu verlegen!

Measuring lines must always be laid shielded!
WD-Kabel getrennt vom WF-/WG-Kabeln verlegen!

WD-cables to be installed separate from WF-/WG-cable!
Alle Kabel mssen den Flammentest Anforderungen fr gebndelte Kabel nach IEC 60332-3 / IEEE 45-18.13 gerecht werden.
All cables must meet the flame test requirements for bunched cables acc. to IEC 60332-3 / IEEE 45-18.13.
Das gesamte Kabelmaterial muss halogenfrei nach IEC 60754-1, giftfrei nach IEC 60754 und korrosionsfrei nach IEC 60754-2 sein
All cable materials must be free of halogens acc. to IEC 60754-1, no toxicity acc. to 60754 and no corrosivity acc. to IEC 60754-2.
Alle Kabel mssen eine Abnahme der relevante Abnahmegesellschaft haben. Isolierungsfestigkeit: 0.6/1KV
All cables must have an approval of the relevant classification society. Insulating strength: 0.6/1KV
Date
GEA WSPN Standard: Nexans MPRX 0.6/1kV.
WD-Kabel
WD-cable
Energiekabel < 1kV

Energy cable < 1kV
WE-Kabel
WE-cable
Erdungs-/Potentialausgleichsleiterleiter
Earth-/ Equipotential bonding conductor
WF-Kabel
WF-cable
Datenbus
Data bus
WG-Kabel
WG-cable
Steuer-/ Messkabel
Control-/measuring cable
WH-Kabel
WH-cable
Lichtwellenleiter
Optical fibre
Legende Kabeltypen (Kabelliste)

Legend cable typ (list of cables)
-J
Kabel / Leitung mit Schutzleiter

Cable / conductor with protective conductor
FC.CY
Motorkabel FU mit konzentrischem Auenleiter (PE)

Motor cable FC with concentric outer (PE)
-O
Kabel / Leitung ohne Schutzleiter

Cable / conductor without protective conductor
PL
Potentialausgleichsleiter
Equipotential bonding conductor
CY-J
Kabel / Leitung mit Schutzleiter geschirmt

Cable / conductor with protective conductor screened
Ex-CY
Steuerleitung blau fr eigensichere Stromkreise

Control line blue for intrinsically safecircuits
CY-O
Kabel / Leitung ohne Schutzleiter geschirmt

Cable / conductor without protective conductor screened
CY-TP
Datenleitung paarverseilt
Data line twisted pair
FC.CY-J
Motorkabel FU geschirmt mit Schutzleiter

Motor cable FC screened with protective conductor
Date
Editor
Tested
Changes
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator

Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMB
Bl./Sh.
50
67 Bl./Sh.
FU
FC
Generelle Information zum Potentialausgleich.

Die Informationen auf diesem Blatt sind nicht
kundenspezifisch angepasst.
=..-U.
IP54
General Information for the equipotential bonding system.

Please note, that the information shown on this page are
not customised.
10 mm
GN YE
PE-Schiene
protective earth - rail
IDM
25 mm
GN YE
10 mm
GN YE
PA
PA1
PA2
PA3
PA4
PA5
PA6
PA7
Potentialausgleichsschiene
equipotential bonding strip
Potentialausgleich Gebude
equipotential bonding building
10 mm
GN YE
25 mm
GN YE
Fundamenterder
foundation earth
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMB
Bl./Sh.
51
67 Bl./Sh.
Changes
Date
Name
Date
Editor
Tested
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
=100-WG004
SC
SC
GLAND
GLAND
GLAND
GLAND
X
X
X
X
X
SC
SC
MPRXCX 2x1,5 mm
=100-WG004
MPRXCX 2x1,5 mm
=100-WG003
MPRXCX 2x1,5 mm
=100-WG002
MPRXCX 2x1,5 mm
=100-WG001
MPRXCX 2x1,5 mm
-PE
&EFS/21.5
&EFS/21.4
&EFS/21.2
&EFS/21.1
&EFS/19.2
&EFS/18.7
&EFS/18.2
&EFS/16.3
&EFS/14.3
&EFS/13.4
&EFS/13.4

=100-WG003
SC
SC

=100-WG002
SC
SC
Wasserschlossalarm
=100-WG001
GLAND
SC
GLAND
GLAND
-PE
-PE
-PE
-PE
&EFS/12.2
Sammelstrung
Common failure
SC
SC
=11-WG005
=11-WG005
MPRXCX 7x1,5 mm
GLAND
GLAND
=01-WG011
GLAND
Feed back feed pump
SC
GLAND
=01+JB-1X10_GLAND
GLAND
MPRXCX 2x1,5 mm
=01-WG010
MPRXCX 7x1,5 mm
GLAND
Wasserabfuhrventil
=01-WG010
SC
SC
=01-WG004
MPRXCX 4x1,5 mm
=01-WG009
MPRXCX 2x2,5 mm
=01-WG007
GLAND
-PE
&EFS/10.1
Zulaufventil
Feed valve
=01+JB-1X10_GLAND
SC
SC
Wasserabfuhr
SC
SC
=01-WG009
=01-WG007
MPRXCX 2x1,5 mm
=01-WG006
GLAND
-PE
1
Separator Strung
Separator failure
Ejection monitoring
=01-WG006
SC
SC
Separator Aus
Separator off
SC
SC
MPRXCX 2x1,5 mm
-WG008
GLAND
Ziel intern
Target intern
MPRXCX 2x2,5 mm
-WD001
Klemmennummer
Terminal number
-WG008
-WD001
Querverweis
Cross reference
Separator Not-Halt
Einspeisung
Incoming
=0+-GLAND
0
5
6
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
SC
SC
GLAND
Rev.01 =
As built +
8106-2004-059
DCC
& EMC
Bl./Sh.
52
67 Bl./Sh.
A2
-T2
Klemmennummer
Terminal number
Brcken
Bridges
=0+-24M
Ziel intern
Target intern
BU
13
GN/YE
PE
Name
=01-X2
Steuerspannung DC
Control voltage DC
Date
Editor
Tested
Date
PE
-PE
13
Changes
=01-K1
Querverweis
Cross reference
&EFS/11.6
&EFS/11.6
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
53
67 Bl./Sh.
&EFS/23.6
-24M
-PE
-PE
Ziel intern
Target intern
-PE
&EFS/11.6
&EFS/11.6
&EFS/10.6
&EFS/10.6
&EFS/10.6
Querverweis
Cross reference
&EFS/10.5
&EFS/10.3
PE
PE
PE
PE
PE
PE
PE
SC
GN/YE
PE
L
GN/YE
PE
GN/YE
PE
GN/YE
PE
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
PE
PE
Steuergert
Timing unit
-PE
Steuerspannung DC
Control voltage DC
-1G
Erdung Gehuse 1
Earthing cabinet 1
Erdung Tr 1
Earthing door 1
-1M
-1T
PE
Filterlfter
Filter fan
-M1
-SC
Erdung Schirm
Earthing screen
Changes
PE
M
1~
SC
Date
Editor
Tested
N
N
Klemmennummer
Terminal number
PE
=0+-PE
Brcken
Bridges
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
54
67 Bl./Sh.
-SC
Ziel intern
Target intern
-SC
Querverweis
Cross reference
&EFS/20.7
&EFS/10.3
SC
Klemmennummer
Terminal number
SC
=0+-SC
Brcken
Bridges
PE
SC
Date
Name

Erdung Schirm
Earthing screen
Date
Editor
Tested
Changes
SC
=11-X2
-PE
PE
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
55
67 Bl./Sh.
&EFS/10.5
&EFS/10.5
-S1
23
&EFS/10.4
&EFS/10.4
-S1
13
-F1
Ziel intern
Target intern
-F1
Querverweis
Cross reference
&EFS/10.1
&EFS/10.1
2
2
RD
L
RD/WH
PE
-WD001
1
L1
MPRXCX 2x2,5 mm
Klemmennummer
Terminal number
=0+-X1
Brcken
Bridges
PE
M
1~
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Filterlfter
Filter fan
Reserve
Spare
Einspeisung
Incoming
-M1
=Customer+L-X
L1
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
56
67 Bl./Sh.
=MCC-X
Ziel intern
Target intern
=MCC-X
Querverweis
Cross reference
&EFS/12.1
&EFS/12.1
2
-WG008
MPRXCX 2x1,5 mm
Klemmennummer
Terminal number
=0+-X2
Brcken
Bridges
Date
Editor
Tested
Changes
Date
Name
Separator Not-Halt
=MCC-X
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
57
67 Bl./Sh.
-T1
-WG007
MPRXCX 2x2,5 mm
Klemmennummer
Terminal number
Brcken
Bridges
=01+-X1
Ziel intern
Target intern
-T1
Querverweis
Cross reference
&EFS/13.4
&EFS/13.4
Date
Editor
Tested
Changes
Date
Name
Ejection monitoring
=MCC-X_
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
58
67 Bl./Sh.
Changes
Date
Editor
Tested
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
2
12
3
15
7
4
16
5
18
6
17
3
MPRXCX 4x1,5 mm
-WG009
MPRXCX 7x1,5 mm
-WG011
21
20
19
18
17
16
15
14
13
12
11
10
=00-K1
=00-K1
=00-K1
=00-K1
=00-K1
=00-K1
=0-24M
=00-K1
=00-K1
=00-K1
=11-X2
=00-K1
X11:2
X11:1
X12:6
X12:5
X12:2
X12:3
X12:1
X11:16
X11:6
X13:8
&EFS/14.2
&EFS/14.1
&EFS/18.7
&EFS/18.6
&EFS/18.5
&EFS/18.4
&EFS/18.4
&EFS/18.3
&EFS/18.1
&EFS/18.1
&EFS/17.4
&EFS/16.3
&EFS/16.3
&EFS/16.2
&EFS/16.2
&EFS/16.1
&EFS/16.1
Separator Strung
Separator failure
=MCC
Separator Betrieb
Separator operation
Wasserabfuhrventil
+
MPRXCX 2x1,5 mm
-WG010
MPRXCX 7x1,5 mm
-WG011
MPRXCX 7x1,5 mm
-WG004
MPRXCX 4x1,5 mm
-WG009
X13:5
&EFS/15.2
&EFS/15.2
&EFS/13.4
Kreislaufventil
Circulation valve
6
1
10

+JB-1X10
Steuerwasser
Operating water
-*8_7_002
1
MPRXCX 7x1,5 mm
-WG004
=00-K1
=0-X2
2-
1+
12
&EFS/13.4
Zulaufventil
Feed valve
Reserve
Spare
+JB-1X10
Wasserabfuhr
=MCC
4
MPRXCX 4x1,5 mm
-WG009
-T2
-T2
-K1
11
Separator Strung
Separator failure
+JB-1X10
=MCC
1
MPRXCX 7x1,5 mm
-WG004
-K1
Separator Betrieb
Separator operation
Reinoel Ablaufdruck
+JB-1X10
MPRXCX 2x1,5 mm
-WG006
Klemmennummer
Terminal number
1
Ziel intern
Target intern
Drehzahlberwachung
=MCC-X_
Querverweis
Cross reference
Separator Aus
Separator off
=01+-X2
0
6
7
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
12
Rev.01 =
As built +
8106-2004-059
DCC
& EMC
Bl./Sh.
59
67 Bl./Sh.
Changes
Date
Name
Date
Editor
Tested
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
1
+
2
8
1
1
MPRXCX 3x1,5 mm
-WG122
MPRXCX 2x1,5 mm
-WG106
MPRXCX 2x1,5 mm
-WG105
2
10
PE
18
17
16
15
14
13
12
-PE
-X2
-X2
-X2
-X2
-X2
-X2
-X2
-X2
18
19
17
15
14
11
10
&EFS/18.4
&EFS/18.6
&EFS/18.7
&EFS/18.5
&EFS/18.4
&EFS/18.4
&EFS/18.3
&EFS/18.3
&EFS/17.1
&EFS/17.4
&EFS/17.3
&EFS/17.1
&EFS/16.3
&EFS/16.2
&EFS/16.1
&EFS/16.1
&EFS/16.1
&EFS/15.2
&EFS/15.2

Wasserabfuhrventil
+SB-1X20
Kreislaufventil
Circulation valve
-*9_7_005
11
10
-X2
-X2
-X2

-*9_7_004
Steuerwasser
Operating water
2
MPRXCX 4x1,5 mm
-X2
Reserve
Spare
BU
Wasserabfuhr
BN
-WG121
.-O 2x0,34 mm
-WG101
&EFS/16.4
&EFS/18.3
+SB-1X20
Reinoel Ablaufdruck
-*0_9_020
-PE
Ziel intern
Target intern
Drehzahlberwachung
PE
Klemmennummer
Terminal number
PE
Querverweis
Cross reference
Wasserabfuhr
Steuerwasser
Operating water
=01+JB-1X10
0
5
6
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
3
11
Rev.01 =
As built +
8106-2004-059
DCC
& EMC
Bl./Sh.
60
67 Bl./Sh.
&EFS/18.4
&EFS/18.3
=0-GLANDGLAND
=0-GLANDGLAND
Ziel intern
Target intern
-WG106
SC
SC
SC
SC
PE
SC
SC
PE:PE PE:PE
MPRXCX 2x1,5 mm
GLAND
MPRXCX 2x1,5 mm
GLAND
-WG105
MPRXCX 3x1,5 mm
GLAND
-WG122
Klemmennummer
Terminal number
MPRXCX 4x1,5 mm
GLAND
Brcken
Bridges
-WG121
=01+JB-1X10_GLAND
Querverweis
Cross reference
&EFS/18.7
&EFS/16.3
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
-WG106
Steuerwasser
Operating water
Wasserabfuhrventil
Wasserabfuhr
-WG105
+SB-1X20
PE
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
61
67 Bl./Sh.
Changes
Date
Name
Date
Editor
Tested
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
P
-
BN
+
BU
I
PE
-*0_7_011
BU
PE
PE
PE
11
X
X
PE
PE
GEA Westfalia
Separator
.-J 3x0,75 mm
-WG205
.-J 3x0,75 mm
-WG204
.-J 3x0,75 mm
-WG205
10
18
17
16
+JB-1X10_GLAND
GLAND
+JB-1X10_GLAND
GLAND
+JB-1X10
+JB-1X10
+JB-1X10
+JB-1X10
+JB-1X10
&EFS/18.7
&EFS/18.6
&EFS/18.6
&EFS/18.7
&EFS/18.5
&EFS/18.5
&EFS/16.3
&EFS/16.3
&EFS/16.3
&EFS/16.2
&EFS/16.2
&EFS/16.1
&EFS/16.1
Wasserabfuhrventil
-*0_7_010
BN
Kreislaufventil
Circulation valve
-*0_7_011
GY
.-J 3x0,75 mm
-WG204
.-O 3x0,75 mm
+JB-1X10
Wasserabfuhrventil
BN
Kreislaufventil
Circulation valve
BK
A/Q
-WG203
.-O 2x0,34 mm
-WG202
+JB-1X10
BK
A/Q
WH
-*0_7_010
-*0_9_013
BK
Wasserabfuhr
WH
-*0_9_014
2
.-O 2x0,34 mm
-WG201
Klemmennummer
Terminal number
Ziel intern
Target intern
-*1_9_002
Querverweis
Cross reference
Reinoel Ablaufdruck
=01+SB-1X20
0
4
5
6
7
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
9
Brcken
Bridges
PE
PE
Rev.01 =
As built +
8106-2004-059
DCC
& EMC
Bl./Sh.
62
67 Bl./Sh.
&EFS/21.5
-K4
14
&EFS/21.5
-K4
11
&EFS/21.4
-K3
14
&EFS/21.3
-K3
11
&EFS/21.2
-K2
14
&EFS/21.2
11
-K2
14
-K1
8
-WG004
MPRXCX 2x1,5 mm
6
-WG003
MPRXCX 2x1,5 mm
4
MPRXCX 2x1,5 mm
3
2
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:


Wasserschlossalarm
Sammelstrung
Common failure
=Customer+L-X
-WG002
-WG001
MPRXCX 2x1,5 mm
Klemmennummer
Terminal number
Brcken
Bridges
=100+-X2
Ziel intern
Target intern
-K1
11
Querverweis
Cross reference
&EFS/21.1
&EFS/21.1
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
63
67 Bl./Sh.
&EFS/20.7
SC
&EFS/20.6
=0-SC
=00-K1
X13:16
&EFS/20.6
=MCC
=MCC
SC
5
2
3
3
4
4
.CY-O 4x1,5 mm
-WG003
-WG005
MPRXCX 2x1,5 mm
Klemmennummer
Terminal number
Brcken
Bridges
=11+-X2
Ziel intern
Target intern
=00-K1
X13:15
&EFS/20.5
&EFS/20.5
Querverweis
Cross reference
&EFS/19.1
&EFS/19.1
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:

Reserve
Spare
Feed back feed pump
-*0_9_006
=MCC
GEA Westfalia
Separator
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EMC
Bl./Sh.
64
67 Bl./Sh.
Stckliste
Parts list
Funktionszeichen
Function sign
/Seite.Pfad
/page.path
=0-F1
&EFS/10.1
WS Teil - Nr.
WS part - no.
Hersteller Bestell-Nr.
Manufacturer order no..
Bezeichnung
Name
Hersteller
Manufacturer
0005-1551-010
566556
Sicherungsautomat, C 6A , 2 pol
AEG
Circuit breaker
=0-M1
&EFS/10.4
0005-1409-320
116 22 10 1 055
Filterlfter, 207-253V, 50/60Hz, 19/18W, 44/52m/h, IP54, RAL 7035
Pfannenberg
Filter fan
=0-M1
&EFS/10.4
0005-1409-230
117 20 00 1 055
Austrittsfilter
Pfannenberg
Discharge filter
=0-S1
&EFS/10.1
0005-1439-000
3SB3000-2KA21-DC
Schwenksteller komplett, rastend, rot, 0-I, 1x 2NO + 1x1NC
Plenge
Selector switch complete

=0-X1
&EFS/10.1;
2002-1201
2002-1201
Wago
2-Conductor through terminal block

=0-24M
&EFS/11.6
0005-4708-890
1031400000
Durchgangs-Reihenklemme, 1,5 mm, Schraubanschluss, Wemid, dunkelbeige, TS 35
Weidmueller
Feed-through terminal
=0-P1
&EFS/11.8
0005-4396-040
3SB3001-6AA60
VORSATZ, RUND LEUCHTMELDER LINSE WEISS MIT HALTER
Siemens
INDICATOR LIGHT WITH HOLDER, SMOOTH LENS LENS WHITE

=0-P1
&EFS/11.8
3SB3400-1RE
3SB3400-1RE
LAMPENFASSUNG MIT INTEGRIERTER LED, AC 230V, WEISS
Siemens
LAMPHOLDER WITH INTEGRATED LED, 230V AC, WHITE

=0-P1
&EFS/11.8
3SB3922-0AV
3SB3922-0AV
SCHILDTRAEGER FLACH, FUER BEZEICHNUNGSSCHILD 12,5 X 27MM
Siemens
FLAT HOLDER FOR INSCRIPTION PLATE 12.5 X 27 MM

=0-P1
&EFS/11.8
3SB1901-2AA
3SB1901-2AA
BEZEICHNUNGSSCHILD, SILBERFARBEN, FR SELBSTBESCHRIFTUNG, 12,5x27MM
Siemens
LABEL
=0-T2
&EFS/11.5
0005-1407-020
6EP1333-2AA01-0AA0
Einphasennetzgeraet Prim.: 120/230V, 50/60Hz, Sec.: 24VDC, 5A
Siemens
Single phase power supply

=0-X2
&EFS/12.1
2002-1201
2002-1201
Wago

=01-T1
&EFS/13.5
0005-3482-070
1073490000
Stromberwachung, 0...1 A AC/ 0...5 A AC/ 0...10 A AC , 1 , 0(4)...20 mA , 0...10 V , 1
Weidmueller
Current monitoring
=01-X1
&EFS/13.4
2002-1201
2002-1201
Wago

=01-X2
&EFS/13.4;
2002-1201
2002-1201
Wago

=01-K1
&EFS/14.4
0005-4033-040
2966171
Relais Einzelkontakt, PLC-Interface, Miniaturrelais mit Leistungskontakt, 1 Wechsler, Un=24
Phoenix Contakt
Relay single contact

=01-T2
&EFS/15.1
0005-4509-000
KCD2-E2
Sensor-Endstufenklemme, Eingang fr NAMUR-Sensoren, 24V DC Speisespannung
Pepperl & Fuchs
Converters- Amplifier to convert NAMUR sensor

=11-X2
&EFS/19.1;
2002-1201
2002-1201
Wago

=100-K1
&EFS/21.1
0005-4033-040
2966171
Phoenix Contakt

Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stckliste
Parts list
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EPB
Bl./Sh.
65
67 Bl./Sh.
Stckliste
Parts list
Funktionszeichen
Function sign
/Seite.Pfad
/page.path
=100-K2
&EFS/21.2
WS Teil - Nr.
WS part - no.
Bezeichnung
Name
Hersteller
Manufacturer
0005-4033-040
2966171
Phoenix Contakt

=100-K3
&EFS/21.3
0005-4033-040
2966171
Phoenix Contakt

=100-K4
&EFS/21.5
0005-4033-040
2966171
Phoenix Contakt

=100-X2
&EFS/21.1..
2002-1201
2002-1201
Wago

=00-K1
&EFS/23.1
0005-4050-430
6ES7613-1SB02-0AC0
Komplettgert GEA, C7-613, 24DE/16DA/5AE/2AA, SIMATIC C7
Siemens
Control system GEA, C7-613, 24DI/16DO/5AI/2AO, SIMATIC C7

-Cabinet
&ELU/27.1
1338500
1338500
Kompakt-Schaltschrank AE, lackiert RAL 7035, mit Montageplatte, eintrig
Rittal
Compact enclosure AE, painted RAL 7035, with mount. plate, single door
-Cabinet
&ELU/27.1
2508000
2508000
Wandbefestigungshalter Stahlblech, Wandabstand 10mm
Rittal
Wall mounting bracket sheet steel, zinc-plated & passivated wall distance 10 mm
-Cabinet
&ELU/27.1
0005-1412-000
2519000
Trarretierung fr das AE Programm
Rittal
Door stay for the AE range

-Cabinet
&ELU/27.1
2510000
2510000
Schaltplantaschen aus Kunststoff Din A4
Rittal
Wiring plan pockets of plastic Din A4

-Cabinet
&ELU/27.1
Lack_AE1030-1338
Lack_AE1030-1338
Lackierung AE-Schrank
Plenge
Painting
-Cabinet
&ELU/27.1
8556-9999-000
KLEINMATERIAL
Kleinmaterial Schaltschrank
Plenge
Incidentals control cabinet

-Cabinet
&ELU/27.1
RESOPALSCHILD100/130 RESOPALSCHILD100/130 Resopalschild
Kaiser
Resopal plate
-Cabinet
&ELU/27.1
4568000
4568000
Transportsen fr PS/ES und TS
Rittal
Eyebolts for PS/ES and TS

-Cabinet
&ELU/27.1
ADERKENNZEICHNUNG
ADERKENNZEICHNUNG
Aderkennzeichnung
Plenge
Wire marking
-Cabinet
&ELU/27.1
Halogenfreie Kanle
Plenge
Halogen free Channels

-Cabinet
&ELU/27.1
Halogenfreie Verdrahtung
Plenge
Halogen free Wiring

-Ground_plate
&ELU/28.1
0005-4515-600
11-24-000-200-12
Heinrich
cable gland
-Ground_plate
&ELU/28.1
0005-4516-600
11-24-000-200-14
Verschraubung, Z14, 12-14,5mm
Heinrich
cable gland
-Ground_plate
&ELU/28.1
0005-4443-630
81-20-802-0001-04
Blindstopfen Messing, M20x1,5
Jacob
Blanking plug brass nickeled

Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stckliste
Parts list
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EPB
Bl./Sh.
66
67 Bl./Sh.
Stckliste
Parts list
Funktionszeichen
Function sign
/Seite.Pfad
/page.path
-Ground_plate
&ELU/28.1
WS Teil - Nr.
WS part - no.
Bezeichnung
Name
Hersteller
Manufacturer
22-20-02-2
22-20-02-2
Heinrich
EMV-Counter nut
=Additions
&ELU/28.8
0005-1554-000
1646461044
Kabelbezeichnung, polyamid
Weidmueller
Cable designation
=Additions
&ELU/28.8
8555-9001-010
8555-9001-010
Betriebsanleitung D10 NewDesign, englisch
WS Mineraloil Systems
Instruction manual
=Additions-S01
&ELU/30.1
0005-0081-030
3SB3801-0DF3
Pilzdrucktaster Gehuse, verrastend, mit Schutzkragen, 1NC, 2x M20
Siemens
Mushroom push button box

=Additions-S01
&ELU/30.1
0005-4515-600
11-24-000-200-12
Heinrich
cable gland
=Additions-S01
&ELU/30.1
22-20-02-2
22-20-02-2
Heinrich
EMV-Counter nut
=Additions-B1
&ELU/31.2
0005-0924-220
TAID10B500
Stromwandler, 50/1A
IME
Current transformer
=Additions-F1
&ELU/32.2
0005-1100-070
3RN1010-1CM00
THERMISTOR-MOTORSCHUTZ, STANDARD-AUSWERTEGERT, AUTO, 1S+1OE, AC 230V
Siemens
THERMISTOR MOTOR PROTECTION STANDARD EVALUATION UNIT AUTO, 1NO+1NC, AC
Date
Editor
Tested
Changes
Date
Name
04.03.2011
BEE/PLE
04.03.2011 KA
Kunde:
Customer:
Projekt:
Project:
GEA Westfalia
Separator
Stckliste
Parts list
Rev.01 =
As built +
Sprache:
Language:
de/en
Zeichnungs Nr.:
Drawing No.:
DCC
8106-2004-059
& EPB
Bl./Sh.
67
67 Bl./Sh.
Commissioning Equipment,
Tools and Spare Parts List
LO
OSE 20-0196-067
Quantity
2
1
Part no.:
2064-9769-020
2064-9901-000
Description
Set of commissioning equipment
Set of tools and accessories
A company of GEA group

Note: SUBJECT TO ODIFICATION
Part no. 2064-9769-020
Packing list of accessories :
2064-9769-020
SET OF COMMISSIONING EQUIPMENT
Pos.
Part no.
Part description
Quantity Unit of Qty
0010
0007-1936-750
Gasket
PC
0020
0007-2925-750
Gasket
PC
0030
0007-2485-600
Gasket
PC
0040
0007-1904-750
Gasket
PC
0050
0007-1936-750
Gasket
PC
0060
0007-1861-750
Gasket
PC
0070
0007-1987-750
Gasket
PC
0080
0015-0003-080
Lubricating oil ( for initial filling oil )
PC
0090
0021-3337-900
Drive belt
PC
0095
0015-0082-000
Lubricating grease
PC
Part no. 2064-9901-000
Packing list of accessories :
2064-9901-000
SET OF TOOLS AND ACCESSORIES
Pos.
Part no.
Part description
Quantity Unit of Qty
0010
0003-0644-300
Mallet
PC
0015
0003-0596-320
Socket wrench, compl
PC
0020
0003-3796-320
Offset screwdriver
PC
0030
0003-3685-000
Double hook wrench, compl
PC
0040
0013-0279-300
Hexagon nut
PC
0050
0019-6959-300
Hex head screw
PC
0060
0026-0356-300
Washer/ disk
PC
0070
2064-9982-000
Eye bolt, compl
PC
0080
2064-9822-000
Bell-shaped piece
PC
0090
2064-9860-000
Mounting tool, compl
PC
0100
2064-9943-000
Annular wrench, compl
PC
0110
2064-9823-000
Mounting ring
PC
0120
0018-2916-050
Double nipple
PC
0130
0019-6340-300
Threaded pin
PC
0140
2058-9939-000
Washer/ disk
PC
0150
2142-9935-000
Pressure piece
PC
0160
0013-0280-300
Hexagon nut
PC
0170
0019-6994-300
Hex head screw
PC

Separatoare

Uploaded by

Document Informationclick to expand document informationsaffdh

Document Informationclick to expand document information

Copyright:

Available Formats

Separatoare

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Separatoare

Uploaded by

Copyright:

Available Formats

Final Drawings

WS-Ordernumber: 452946646 / 452946721

Installation Instruction, Graphical Symbols

GEA Mechanical Equipment / GEA Westfalia Separator Group

ORIGINAL INSTRUCTION MANUAL

GEA Westfalia Separator Group GmbH

For your safety

Compressed air quality .......................................................................... 38

Water quality .......................................................................................... 34

Space requirement for separators ......................................................... 20

Operating, filling and displacement water

Safety precautions ................................................................................... 8

Information on pressure monitoring ....................................................... 40

Recommended criteria for solids tank ................................................... 52

Control cabinet ....................................................................................... 62

Safety precautions ................................................................................... 8

Solids tank venting

The applicable regulations and standards of classification societies or other

Pay attention to the following points on storage and transport packaging.

Handle fragile goods with care!

Protect the goods against moisture and humidity.

Protect the goods against heat!

Pay attention when erecting the goods.

1.4.1 Installation of controls

Connect thermostatically controlled cabinet heating to external voltage and

+/- 10 % of the line voltage

After removing the side boards and

If no forklift trucks are available,

Attach ropes round the case and

1.5.1 Transporting the separator

For OSD 6 or 18 and OSE 5, 10 and 20 separator with belt drive

Attach the transport ropes

For OSD 35 and OSE 40 separator with belt drive

Attach the transport ropes

Attach the transport ropes

Preservation measures on site

Space requirement for separators ......................................................... 20

Space requirement for separators

2.1.1 Separators with belt drive

Side view of separator

Top view of separator

Table with data for rating the lifting device

Required hoist specifications for separators

Ventilating the separator room

Approximate values for air exchange

Table for air volumes pressed out of the housing

The foundation frames must be designed so that dimensions a and b in

Table for dimensioning foundation frames

Securing the separators

Screw rubber-metal cushions 4 into

Hex head screw

Welding procedure for fastening the foundation frame

2.7.1 Installing the separator

Admissible vibration value at the

Tolerable vibration values at the

Limit values for Vibro 1

Pipelines on the separator

2.9.1 Product line