Networking Basics

Aeronomy and RadioPropagation Lab

The Abdus Salam
International Centre of Theoretical Physics

Carlo Fonda
cfonda@ictp.it

Marco Zennaro
mzennaro@ictp.it
 Copyright
This lecture notes are released under the
Creative Common license:
Attribution-NonCommercial-ShareAlike 2.0
You are free:
to copy, distribute, display, and
perform the work
to make derivative works
Under the following conditions:
Attribution.
You must give the original author credit.
Noncommercial.
You may not use this work for commercial purposes.
Share Alike.
If you alter, transform, or build upon this work, you
may distribute the resulting work only under a
license identical to this one.

http://creativecommons.org/licenses/by-nc-sa/2.0/
 Agenda
Why a network?
Standardisation
Theory: the OSI Model
Reality: the Internet
Network classification
 Agenda
Media and Hardware
Internet Addressing
Subnets
Domain Names System
Host configuration
 Why a computer
network?
Distribute pieces of computation
among computers (nodes)

Coordination between processes

running on different nodes

Remote I/O Devices

Remote Data/File Access

Personal communications
(em@il, chat, audio/video
conference, messaging)

World Wide Web

Why standards?
There are:
Many types of
connection media :
telephone lines, optical
fibers, cables, radios,
etc...
Many different types of
machines and operating
systems: Macs, PCs, ...
Many different network
applications: em@il
clients, web browsers, ...
Many... many :)
 Why standards?

So the need to find a

common set of
agreements for
different aspects of
the communication
technology.
This is called
standardisation.
What is a “standard”?
Agreements must be at many
levels ...
How many volts for 0? And for 1?
How to determine the end of a
message?
How to handle lost messages?
How many bits for different data
types? Integers/Strings, etc.
Are characters coded in ASCII ?
How machines are identified in a
network? Names, numbers ?
How to find the way to reach a
machine ? How if there are more
choices ?
How different applications (and OSs)
speaks together through the
network ?
 The ISO
Model
ISO is the International
Organization for
Standardisation
ISO developed a
standard model for
communications, called
the OSI (Open Systems
Interface) Model
OSI Model

Open Systems Interface

Model:
Model = it means that it's only
theory! In fact the OSI model is not
yet fully implemented in real
networks

Open System = It can communicate

with any other system that follows
the specified standards, formats,
and semantics.
Protocols

The rules that specify

how the parties may
communicate are often
named PROTOCOLS.
A standard may be
seen as a collection of
protocols (and other
additional rules).
 OSI Protocols

The OSI Model supports two general

types of protocols. Both are common:
Connection-Oriented
1. Sender and receiver first establish a connection, possibly
negotiate on a protocol. (”virtual circuit”)
2. Transmit the stream of data.
3. Release the connection when done.
E.g. Telephone connection.
Connectionless
No advance setup is needed.
Transmit the message (”datagrams”) when sender is ready.
E.g. surface mail.
7 Layers
7 layers
The OSI model
consists of 7 layers.
Each layer deals with
a specific aspect of
the communication.
Each layer provides
an interface to the
layer above. The set
of operations define
the service provided
by that layer.
7 layers
A message sent by
the top layer is
passed on to the next
lower layer until the
most bottom one.
At each level a
header may be
prepended to the
message. Some
layers add both a
header and a trailer.
7 layers

The lowest layer

transmits the
message over the
network link to the
receiving machine.
It communicates with
the most bottom
layer of the receiver.
7 layers
At the receiving side,
each layer strips the
header (trailer),
handles the message
using the protocol
provided by the layer
and passes it on to
the next higher layer.
Finally the message
arrives to the highest
layer in the receiver.
 1: Physical
Concerned with the transmission of bits.

How many volts for 0, how many for 1?

Number of bits of second to be transmitted.

Two way or one-way transmission

Standardized protocol dealing with electrical, mechanical

and signaling interfaces.

Many standards have been developed,

E.g. RS-232 (for serial communication lines), X.21

 2: Datalink
Handles errors in the physical layer.
Groups bits into frames and ensures their correct delivery.
Adds some bits at the beginning and end of each frame
plus the checksum.
Receiver verifies the checksum.
If the checksum is not correct, it asks for retransmission.
(send a control message).
Consists of two sublayers:
Logical Link Control (LLC) defines how data is
transferred over the cable and provides data link
service to the higher layers.
Medium Access Control (MAC) defines who can use
the network when multiple computers are trying to
access it simultaneously (i.e. Token passing, Ethernet
[CSMA/CD], etc...).
 3: Network
Concerned with the transmission of packets.
Choose the best path to send a packet (routing).
It may be complex in a large network (e.g. Internet).
Shortest (distance) route vs. route with least delay.
Static (long term average) vs. dynamic (current load)
routing.
Two protocols are most widely used.
X.25
Connection Oriented.
Public networks, telephone, European PTT.
Send a call request at the outset to the destination.
If destination accepts the connection, it sends an connection
identifier.
IP (Internet Protocol)
Connectionless.
Part of Internet protocol suite.
An IP packet can be sent without a connection being established.
Each packet is routed to its destination independently.
 4: Transport
Network layer does not deal with lost messages.
Transport layer ensures reliable service.
Breaks the message (from sessions layer) into smaller
packets, assigns sequence number and sends them.
Reliable transport connections are built on top of X.25 or
IP.
In case IP, lost packets arriving out of order must be
reordered.
Two examples:
TCP(Transport Control Protocol): Internet
connection–oriented transport protocol.
TCP/IP is widely used for network/transport layer.
UDP (Universal Datagram Protocol): Internet
connectionless transport protocol.
Application programs that do not need
connection–oriented protocol generally use UDP.
 5: Session
Just theory! Very few applications use it.
Enhanced version of transport layer.
Dialog control, synchronization facilities.
Rarely supported (Internet suite does not).
Supposed to be the right place for security and
authentication.
6: Presentation
Just theory! Very few applications use it.
Concerned with the semantics of the bits.
Define records and fields in them.
Sender can tell the receiver of the format.
Makes machines with different internal representations to
communicate.
If implemented, the best layer for cryptography.
 7: Application
Collection of miscellaneous protocols for high level
applications
Electronic mail, file transfer, connecting remote terminals,
etc.
E.g. SMTP, POP, IMAP, FTP, Telnet, SSH, HTTP, HTTPS,
SNMP, etc...
The real standard
The Atlantic cable of 1858 was
established to carry instantaneous
communications across the ocean
for the first time. Although the laying
of this first cable was seen as a
landmark event in society, it was a
technical failure. It only remained in
service a few days. Subsequent
cables laid in 1866 were completely
successful and compare to events
like the moon landing of a century
later... the cable ... remained in use
for almost 100 years.

The Internet was born

in 1969
 The real standard
Around Labor Day in 1969,
BBN delivered an Interface
Message Processor (IMP) to
UCLA that was based on a
Honeywell DDP 516, and when
they turned it on, it just started
running. It was hooked by 50
Kbps circuits to two other sites
(SRI and UCSB) in the
four–node network: UCLA,
Stanford Research Institute
(SRI), UC Santa Barbara
(UCSB), and the University of
Utah in Salt Lake City.

The first LOG: UCLA–Stanford

The Internet Model

The INTERNET and TCP/IP Reference

model (aka "the Internet suite")
Is the standard de facto for the
majority of networks
It is simpler than the OSI Model. It has
only four layers:
OSI Presentation and Session layers are missing
The Internet layer (OSI: Network) handles packets
The Host-To-Network layer (OSI: Datalink + Physical) handles
frames and bits
 The Internet Model

OSI Internet Suite

7. Application Application
6. Presentation
5. Session
4. Transport Transport
3. Network Internet
2. Data link
Host-to-network
1. Physical
Measuring a Network
Measuring the “speed”
Performance
parameters:
Latency
Data transfer rate
Bandwidth
Measuring the “speed”
Latency
It’s the time required to transfer an empty
message between relevant computers.
Sum total of
1. delay introduced by the sender software.
2. delay introduced by the receiver software.
3. delay in accessing the network.
4. delay introduced by the network.

Typical values:
Local Ethernet: 0.2–1 msec
Wireless link: 1.5–3 msec
Long distance (many hops): 10–100 msec
Intercontinental/Satellite: 100–500 msec
Multiple Satellite hops: 500–1500 msec
Measuring the “speed”
Data transfer rate
It’s the speed at which data can be
transferred between sender and receiver in a
network, once transmission has begun.
bit/sec (bps)
bytes/sec (Bps)
Typical values:
100baseT Ethernet: 100 Mbps
10base2, 10base5 and 10baseT Ethernet: 10 Mbps
Wireless 802.11: 1–54 Mbps
Telephone modem: 56 Kbps
Packet Radio AX25: 1200–19200 bps
Measuring the “speed”
Message transfer time
= latency + (length of message) / (Data transfer rate)

Bandwidth: is the total volume of

traffic that can be transferred
across the network
High/low bandwidth
The real value may be much lower than the
theoretical one (i.e. due to collisions,
congestion, protocol overhead, etc...)
Network dimension

Networks can be
divided into three
types based on
geographical areas
covered:
LANs
MANs
WANs
 Network dimension

LAN
Local Area Network.
Typically it connects
computers in a single
building or campus.
E.g. Ethernet, WiFi
(WLAN).
 Network dimension
MAN
Metropolitan Area
Network.
It covers towns and
cities (50 km).
Optical fibers,
microwave links,
often operated by
Telecoms.
Network dimension

WAN
Wide Area Network.
It covers large
distances (regions,
countries, continents).
Satellites, optical
fibers, microwave
links. Very expensive.
Topology

Networks may be
structured according
to various topologies:
fully connected
partially connected
 Topology

Examples of simple network

topologies are:
Ring
E.g. Token Ring by IBM

Star
Used in the past, with many terminals connected to
one server

Bus
The bus is a shared media
Topology
More realistic and
complex network are
usually structured as
Tree
Hierarchical structure with many
branches

Mesh
A mixture of all previous kinds of
topology
Which medium?
There are four principal media for
network communications:
Coaxial cable (now obsolete)
Twisted pair cable
Optical fiber
Wireless
Network hardware

Common requirements are:

To connect networks of different types,
different vendors.

To provide common communication

facilities and hide different hardware
implementations and protocols of
constituent networks.

Standard network hardware is needed

for extensible open distributed systems.
 NIC

Network Interface
Card, or Network
Adapter.
It interfaces a
computer board with
the network medium.
Repeater
It’s a two-ports
electronic device that
just repeats what
receives from one
port to the other.
A multi-port repeater
is called hub.

8-ports ethernet hub

 Bridge
It’s a more
sophisticated
repeater with logic
capabilities.
A multi-port bridge is
called switch.
Both can
filter packets.
(OSI level 2).
 Router
It links two or more
networks, passing
messages with
appropriate routing
information.
It operates at OSI
level 3.
It must have
extensive knowledge
of the internetwork
(routing tables).
 Gateway
Similar to routers, it
links two networks.
It can also operate at
OSI levels higher
than 3.
When used for
network security
purposes, it is called
firewall.
Internet addressing
Internet (IP) address
It's a 32 bits, 4-part, period delimited
decimal number called IP number or IP
address:
www . xxx . yyy . zzz
each part can vary from 0 to 255 (but
the last 0 and 255 may be reserved for
network and broadcast address).
each network interface card attached
to the Internet mast have an unique IP
address.
Internet (IP) address
The IP address can be separated in two
parts:
network address (part)
host address (part)

 class A net: NNN.hhh.hhh.hhh   NNN: 1 to 127 

CLASSES:  class B net: NNN.nnn.hhh.hhh   NNN: 128 to 191 

 class C net: NNN.nnn.nnn.hhh   NNN: 192 to 223 

 Subnets

Subnetting allows a network to be split

into several parts for internal use but
still act like a single one to the outside
world.
How many IPs around?
Domain Names System
Domain Names System
For convenience a domain name is
normally assigned to each machine
(for humans is easier to remember
names than numbers).
The name is assigned meaning with
the most general part on the right
(opposite to IP addresses):
host.subdomain.organization.country
pc22.netlab.ictp.it
Domain Names System
This allows the IP number to be
changed while the user using the
name sees no change.
To convert names into numbers an
host need to query the Domain Name
System (DNS), a hierarchical
domain–based naming scheme with a
distributed database system.
DNS Servers for each domain.
How many names?
Network configuration
TCP/IP stack config
The information you should provide to
configure the TCP/IP stack for your host
are:
IP address (e.g. 140.105.28.51)
Domain name (not always needed)
Broadcast address (e.g. 140.105.28.255)
Network mask (aka netmask, e.g. 255.255.255.0)
Default gateway (e.g. 140.105.28.1)
DNS server(s) (e.g. 140.105.16.50 and 16.62)
Thank you!