Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
31 views

Transmission Lines and Waveguides: Assignment # 1

The document discusses different units used to measure signal strength and power levels in decibels (dB). It explains that the decibel is used to express the ratio between two power or intensity values, such as sound intensity above the threshold of hearing. It then defines dBm as the power ratio in decibels referenced to one milliwatt and provides the formula to calculate signal strength in dBm. Finally, it introduces dBW as the measurement of signal strength expressed in decibels relative to one watt, giving examples of common power levels in dBW.

Uploaded by

ArslanZafar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31 views

Transmission Lines and Waveguides: Assignment # 1

The document discusses different units used to measure signal strength and power levels in decibels (dB). It explains that the decibel is used to express the ratio between two power or intensity values, such as sound intensity above the threshold of hearing. It then defines dBm as the power ratio in decibels referenced to one milliwatt and provides the formula to calculate signal strength in dBm. Finally, it introduces dBW as the measurement of signal strength expressed in decibels relative to one watt, giving examples of common power levels in dBW.

Uploaded by

ArslanZafar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

TRANSMISSION LINES AND WAVEGUIDES

ASSIGNMENT # 1
GROUP : ARSLAN ZAFAR
RAZI AKBAR
DAUD BIN HABIB
MUHAMMAD USMAN
SECTION :

BETE 51C

SUBMISSION DATE : 15-2-16

Decibel (dB)
The decibel (dB) is a logarithmic unit used to express the ratio of two values of a physical
quantity, e.g power or intensity.
The sound intensity I may be expressed in decibels above the standard threshold of hearing I0 .
The expression is

The decibel ( dB) is used to measure sound level, but it is also widely used in electronics.

(dBm)
dBm is an abbreviation for the power ratio in decibels (dB) of the measured power
referenced to one mill watt (mW).
The expression dBm is used to define signal strength in wires and cables at RF and AF
frequencies.
one milliwatt (1 mW) equals 1/1000 of a watt (0.001 W or 10 -3 W).
Then the signal strength in dBm, symbolized SdBm , is:

dBm

= 10 log

10

(dBW)
The decibel watt or dBW is a unit for the measurement of the strength of a signal expressed
in decibels relative to one watt.
It is used because of its capability to express both very large and very small values of power in a
short range of number; e.g., 1 milliwatt = 30 dBW, 1 watt = 0 dBW, 10 watts = 10 dBW, 100
watts = 20 dBW, and 1,000,000 W = 60 dBW.

You might also like