CLYDESDALE

1 100%C, 91%M, 6%K
Powering the Future
Winches & Jetting Equipment
Winches & Jetting

Equipment
CLYDESDALE
CLYDESDALE
Powering the Future
Underground Cable Winch 3200

A modern machine designed specifically for the installation of underground cables in the
telecom and electricity industries. The 3200 has a capstan system that means the pulling
force and speed are infinitely variable. The wire bond is integral to the machine and is fitted
with an automatic rope-layering device to protect the bond and reduce the operating time.
Part No.
Pulling Force:
Speed:
Engine:
Weight (without rope):
3200 000
2000kg
0-40m/min
4 Stroke Petrol 18hp
650kg
3200
Underground Cable Winch 3300

The Underground Cable Winch 3300 is a hydraulically operated 3-tonne winch with variable
pulling speed and force. The winch is equipped with double bullwheels and an auto layering
system on the collecting drum. By having double bullwheels, this winch differs from a drum
winch as follows:
Always the same uniform pulling force and speed no matter how much cable/rope there is
on the collecting drum.
Fixed input point, that is, no lateral wander of the cable/rope.
3300
The wire bond is integral to the machine and is fitted with an automatic rope-layering device
to protect the bond and reduce the operating time. The winch features infinite control of
speed and pulling force, both forwards and backwards.
Part No.
Pulling Force:
Speed:
Bond (rope):
Operation:
Engine:
Chassis:
Dimensions:
Weight:
3300 0000
Max 3000kg
0-55m/min
Steel cable, 500m x 12mm
Hydraulic
Diesel engine 28hp
Push brake, spring suspended wheel axle,
adjustable support legs and wheels
L 3630mm, W 1850mm, H 1250mm
1290kg
Electronic Data Recorder for underground winches
761 0010
With this control unit the permitted or required pulling force can be reset so that the winch
stops when reaching the preset level. The unit gives information of pulled length of cable and
pulled force. All shown on a digital display via thermoprinted paper.
Part No.
Dimensions:
Weight:
CLY 761 0010

L 400mm, W 300mm, H 130mm
8kg
Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk
www.clydesdale.ltd.uk
CLYDESDALE
Powering the Future
Mini Winch
Mini Winch used for running pilot ropes. The winch fits into the duct opening.
Part No.
Pulling Force:
Speed:
Engine:
Dimensions:
Weight:
CLY 760 200

Approx. 200kg
Max 40m/min
Honda 4 Stroke dev. 2hp
640 x 640 x 370mm
21kg
760 200
Overhead Line Winch 206

The latest descendant in our range of pole mounted winches, the 206 was developed to
comply with the new CE regulations. The drive unit has a built in dead mans handle, meaning
instant stop should the handle be released. The capstan operation gives a constant output
thus giving better control. The winch is supplied in kit format to aid transportation, the
standard kit comprises Engine & Gearbox, Pole Frame, V Belt Drive, Exhaust Pipe,
Linespreader and storage boxes. Drums (split or rope) are supplied separately.
Part No.
Pulling Force:
Speed:
Engine:
Weight:
206
206 000
400kg
0-30m/min
4 Stroke Petrol 5.5hp
56kg (without rope)
Multi-Purpose Winch 210

This particular winch is designed for use on both Overhead Lines and Underground Cables.
A very compact and lightweight trailer winch the 210 has a dynamometer which allows us to
preset the pulling force at 850kg which can be adjusted upto 1,000kg for specific occasions.
This makes the machine ideally suited to ABC work.
When used on underground cable work the additional boom is required to allow horizontal
line pulls in ducts and open trenches. As standard the winch is supplied for ABC work
including a rope drum & 400m of 8mm Paracore rope.
Part No.
Pulling Force:
Speed:
Engine:
Weight:
210
210 000
Up to 1000kg
0-15m/min
4 Stroke Petrol 8hp
260kg (without rope)
CLYDESDALE
Powering the Future
Overhead Line Winch 900 / 902

Widely regarded as the industry standard, these 2 machines have proven reliability, due
mainly to their excellent design & manufacture. Their in built robustness allows use in almost
any environment. The machines can be used for either new construction or refurbishment
works, with the use of rope drums or split drums respectively.
Both machines are fitted with a dead mans handle, which means if the control is released
the load is maintained, and hydraulically controlled prop legs and Linespreader to make
operation simple and quick.
Both machines are supplied with a shaft, but drums / accessories are delivered separately,
for details please see the Winch Drums & Accessories table (below).
Part No.
Drum Pulling Force:
Speed:
Engine:
Weight:
900
2,000kg
0-100m/min
400kg (without drums)
900 / 902
902
3,000kg
0-100m/min
800kg (without drums)
Overhead Line Winch 2240

Our latest generation of machine is designed to fit between the 2 capacities of the 900 / 902,
with the design very similar to that of its predecessors. The latest manufacturing processes
have been incorporated to give even more reliability and ease of use.
Part No.
Pulling Force:
Speed:
Engine:
Weight:
Winch Model Number

Split Drum (Single)
Split Drum (Set of 3)
Rope Drum (Single)
Rope Drum (Set of 3)
Shaft
Weatherproof Cover
Drum Tensioning Device
Linespreader
Linespreader (Hydraulic)
2240
2,500kg
0-100m/min
700kg (without rope)
206
206 001
N/A
206 002
N/A
N/A
N/A
N/A
206 002
N/A
210
204 001
N/A
204 003
N/A
N/A
210 001
N/A
210 118
N/A
2240
3200
N/A
N/A
N/A
N/A
N/A
3200 001
N/A
N/A
N/A
900
900 004
900 116
900 114
900 006
900 113
900 001
640 403
N/A
900 100
902
902 004
900 116
900 114
900 006
900 005
902 001
640 403
N/A
902 015
2240
900 004
900 116
900 114
900 006
2240 005
2240 001
640 403
N/A
2240 100
CLYDESDALE
Powering the Future
DF5 Hydraulic Cable Pusher

Designed to be used in conjunction with a cable winch. The Cable Pusher exerts an assertive
push force of up to 500daN onto the cable; this force will not damage the cable but will
decrease the necessary pull load exerted by the winch. This has the net result of protecting
the cable and increasing efficiency. Ideally suited for the installation of cables into pre-laid
ducts, the cable pusher can also be used for more conventional cable pulls into trenches. The
latest development has seen the installation of multiple cables into multiple ducts in one
pull.
Able to assist cables with an outside diameter ranging from 20-160mm the cable pusher can
also be used for the placing of sub ducts into mainline ducts.
DF5
DF5 Parts Description

Description
DF5 Cable Pusher
Petrol Engine Power Pack
Pressure Roller Small
Pressure Roller Medium
Pressure Roller Large
Pressure Roller X Large
For Cables / Ducts
20-50mm O/D
28-90mm O/D
45-130mm O/D
55-160mm O/D
LxWxH
1,170 x 380 x 700mm
1,100 x 430 x 600mm
Weight
95kg
82kg
5kg
5kg
5kg
5kg
Drum Cradle
A hot dipped galvanised frame, ideal for transporting drums around depot yards. The
Clydesdale version can be taken apart for easy storage. Suitable for drums up to 2,000kg
and 1400mm in diameter.
Part No.
640 115
Weight
25kg
640 115
Roller Drumstands
Simplest type of Drumstand available the Roller Type Drumstand is ideal for use within the
depot for the measuring of cable lengths etc. As this type of Drumstand has no brake
mechanism care should be taken not to spin the drum at too high a speed. Rated to take a
drum of almost any diameter or width the only restriction is its SWL of 1,000kg.
Part No.
640 1000
LxWxH
1,000 x 220 x 140mm
Weight
7kg (Ea.)
640 1000
CLYDESDALE
Powering the Future
Ratchet Operated Cable Drumstand

This unique patented design of cable Drumstand avoids the problems associated with
hydraulic ram type Drumstands with the use of a ratchet mechanism to lift the shaft vertically.
Instead of pumping the hydraulic ram you simply turn the mechanical lever. This is a lot easier
on the operatives back, as well as raising the drum in a smoother manner.
Part No.
Max Drum Dia. / Width / Weight
Length / Width / Weight (complete)
640 150
1800mm / 1200mm / 3,000kg
1220mm / 360mm / 113kg
640 150
Hydraulic Cable Drumstand
The more traditional type of cable Drumstand used extensively for many years now. Often
seen as the lower cost alternative to the revolutionary Ratchet type. Pump the hydraulic rams
on each side of the stand to raise the drum smoothly and easily.
Part No.
Max Drum Dia. / Weight
Length / weight (complete)
640 100
640 200
640 400
1800mm / 4000kg 3000mm / 1000kg 1600mm / 1500kg
1700mm / 157kg 2550mm / 515kg 1150mm / 91kg
640 100
Aluminium Drumstands
Made from Aluminium to reduce weight and with the wheels mounted on the base, these
Drumstands are ideal for the stores environment, or where the drum is changed on a more
regular basis. Design means that an enormous range of cable drum sizes can be managed,
however, due to vertical positioning the stand can only be used on flat surfaces. Available in
two sizes 4,000kg & 6,000kg
Part No.
Max Drum Dia. / Weight
640 4000AL
2000mm / 4000kg
640 6000AL
2800mm / 6000kg
640 6000AL
Vertical Shaft Drumstand RUBE
Ideal for dispensing service cable either in stores or out in the field, the RUBE features many
unique features often copied but never to the high quality that Clydesdale prides itself upon.
Its roller race suspension ensures ease of movement. Easy to use because of its integral
handle and pull out extender arms the RUBE is also self-balanced and galvanised for
long life.
Part No.
640 1076
Weight
13.5kg
Max. Drum Weight

3200kg
640 1076
CLYDESDALE
Powering the Future
Blowing Systems
Cable laying with MicroJet, CableJet or SuperJet consists of using a mechanical feeder to
push a cable into a duct, through which flows a powerful air stream. This high-speed airflow
exerts a drag on the entire surface of the cable, assisting its progress.
As the cable is not pulled, but pushed and carried along by the airflow it moves easily through
the duct following any undulations or changes of direction. As no tractive force is exerted at
the front of the cable, it is not subjected to the usual stresses encountered with conventional
methods.
This jetting creates a method of efficient installation of long sections of fibre optic, co-axial,
multi-pair or even power cables.
The compressor required for the system must have the following characteristics:
12 bar max pressure (minimum 8 bar) and 10m3/min flow rate for placing cables in ducts
with an internal diameter of up to 42mm. To secure performance when ambient temperature
exceeds 30C, the use of a built in Aftercooler is recommended. A separate Aftercooler can
be supplied, should the compressor not be equipped with an Aftercooler.
Any of the three machines can be used in a cascade method, and as there is no limit to the
amount of machines that can be cascaded, almost limitless lengths can be installed using
this method.
Please contact Clydesdale if you would like a demonstration.
MicroJet
This machine is designed to install cables between 2.5mm and 6mm diameter into preinstalled microducts.
The MicroJet ER60 can be used in several methods of installation, as a cable thruster, puller,
or a push/pull device by jetting in compressed air. These multiple modes of operation each
have their own advantages. Jetting allows you to install microcables safely over tortuous
routes. Push/pull mode installation inside buildings using an air bottle instead of a
compressor, thus reducing noise, weight and inconvenience to third parties. Thrusting is safe
and efficient for short cable runs up to 20m.
ER 60
MicroJet ER60 has a very compact design allowing the operator to work in confined spaces
and weighs only 5.5kg.
CableJet
ER 60
Performance of the CableJet machines can be defined as follows:

Installation lengths of range from 1000m to 3000m and more, dependant on quality and
characteristics of duct cable and ambient temperature.
Laying speed varies between 40m and 100m per minute depending on conditions. With a
weight not exceeding 20kg in operational mode, the CableJet is a very compact cable laying
machine. Its air-powered pushing mechanism consists of 8 notched drive wheels.
The CableJet comes supplied with cable inserts and seals covering 9-18mm diameter
cables, but extra inserts covering 6-9mm diameters can be supplied. As standard it is
supplied with 3 duct inserts of 32, 40, and 50mm O/D but other sizes or extra sizes may be
specified when ordering, and these can range from 25 to 63mm.
An indicator showing installed length and laying speed is supplied with each CableJet, the
distance meter assists the operator in locating the front end of the cable at any time.
740 2001
Part No. CLY 740 2001

6
CLYDESDALE
Powering the Future
SuperJet
The SuperJet operates by two hydraulic motors that drive chains covered in synthetic
material. Power is supplied by a hydraulic power pack driven by either an electric motor or
more commonly a 4 stroke petrol engine.
It is designed for installing similar cables to the CableJet, but due to its greater pushing force
it allows the efficient placement of larger cables such as armoured, fibre optic, co-axial
multipair and even power cables.
In its standard form it is supplied with inserts ranging from 15-28mm, but many operators
have successfully installed cables with a diameter of 11mm or below. Duct inserts as per
CableJet are supplied as standard, as is the speed and distance counter.
Using special bespoke adaptor kits for the chains, the SuperJet can also be used to install
bundles of microducts 7 or 10mm in diameter and various quantity configurations. The
microducts are installed concurrently and are jetted-in in much the same way as a cable
would be, and enjoying the same benefits of non-kink, stress free installation. After the
installation of the microducts, the MicroJet could be used to install the individual cables.
Hydraulic SuperJet
Figaro
The Figaro (figure O) is a useful accessory to the CableJetting system, particularly when the
drum length exceeds the installation capacity of one machine.
It achieves this by using several steps, which can entail coiling the uninstalled cable off the
drum to reach the end. It places the cable safely in a basket at up to 100m/min, and can
store up to 2km (subject to diameter) in limited space. Therefore cumbersome figure eight
fleeting is avoided.
The Figaro weighs approx. 100kg with a diameter of 2.25m. It can be dismantled into four
pieces for easy transportation, or can be trailer mounted if desired.
Figaro
Figaro Family
Figarino For small diameter Microcables.
Figaro Suitable for most cables between 8 and 18mm diameter.
Figarone For larger, heavier cables above 20mm in diameter.
Figaro family
Compressor
For efficient blowing results, the use of a reliable high performance compressor is imperative.
Clydesdale recommends the CompAir 12 bar machine. Trailer mounted this precision built
direct drive, oil injected, rotary screw type compressor has a large 73l air reservoir. For
further details please request our datasheet.
Aftercooler AHP-400
The Aftercooler is an essential accessory to all compressors. The temperature of the air
exiting the compressor without the aftercooler is 25-30C above ambient temperature. Above
50C the PE material used for the cable jacket and the duct begins to soften. This will
significantly increase the friction between cable and duct, therefore causing a noticeable
reduction of the system performance. The Aftercooler is placed between the compressor and
the CableJet or SuperJet unit. The compressed air temperature rise, above ambient
temperature, is limited to 10C. The AHP-400 can accept an air flow of up to 14m3/min.
Part No.
Weight:
Length:
Width:
Height:
CLY 740 AHP400

2300kg
4235mm
1870mm
1635mm
Compressor
Aftercooler AHP-400
CLYDESDALE
Powering the Future
Sonic Head
The Sonic Head is an open shuttle, which allows the air stream to flow through its centre
bore. Its use is recommended under the following circumstances:
a) When the cable diameter is very small compared to the internal diameter of the duct
b) When the cable lacks stiffness. The Sonic Head exerts a low pulling force at the front end
of the cable (only a few kg), thus improving the system performance.
Part No.
Use
Weight
CLY 741 N271 000
For Ducts with an internal Dia. 29-32mm
0.21kg
CLY 741 N271 001
0.31kg
CLY 741 N271 002
0.61kg
Sonic Head
Cable End Cap (Bullet)

Manufactured from aluminium, these cable bullets are designed to protect the end of the
cable, and also to guide the cable along its desired route.
Part No.
Use
CLY 741 C70 QCO11
To fit Cable Diameter 10-12mm
CLY 741 C70 QCO13
CLY 741 C70 QCO15
CLY 741 C70 QCO17
CLY 741 C70 QCO19
Cable End Cap
The Y Connector
The Y connector is a CableJet and SuperJet accessory designed for the placement of an
additional cable in an already occupied duct (subject to available space). One branch of the
Y-connector is attached to the CableJet or SuperJet and is used to place the additional cable.
The other branch is used to seal off and hold the first cable. The Y-connector is supplied with
two 50mm duct-sealing inserts.
Pilot Rope Blower (ATCC)
Designed to quickly and easily install steel or wire winch bond into pre-laid PVC duct, the
ATCC is quickly revolutionising the cable pulling industry. The ATCC takes compressed air and
uses it to effectively push the Duct Bird down the pre-laid duct. The Duct Bird having already
been attached to the winch bond simply pulls it down the duct. In a recent demonstration it
has been proven to pull 500m of 11mm wire winch bond in just 7 minutes. When the Duct
Bird exits the duct upon completion of the pull the effective vacuum is broken and the pull
ceases automatically without any risk of injury to operatives or passers by. The ATCC does
away with the three-stage rodding process which up until now has effectively been the only
method available for the placement of the winch bond. The ATCC as such allows winching to
commence almost immediately upon arrival on site, as opposed to the usual several hours
wait for the rodding process to be completed.
Part No.
Duct Sizes
Kit Weight
CLY 730 100
4"-6"
31kg
CLY 730 101
3"-6"
34kg
The Y Connector
Jetplanner Software
The Jetplanner Software allows accurate planning and design of cable routes at the click of
a mouse. Variables such as cable weight, diameter and stiffness are considered along with
duct diameter and topography. The Jetplanner then calculates maximum jetting distances for
the particular circumstances, allowing for accurate design of joints, manhole positions and
cable types and lengths. The Jetplanner Software is an invaluable tool for the serious installer.
730 100
CLYDESDALE
Powering the Future
Sub-Duct Pusher
This hydraulically powered feeder has been specially developed for the placing of plastic subduct into an existing duct. Several feeder units can be connected electronically or
hydraulically in series when the placing distance is long. Control of both force and speed is
either mounted on the frame or can be supplied in a hand held unit (Part No. 506 0110) for
greater flexibility.
Dimensions for all three units are the same at 550mm long x 220mm wide x 340mm high
and a weight of 24kg. The feeder will except duct diameters from 8-35mm.
Safety has also been considered during the design process with many features included,
principally the dead mans handle, control unit with auto stop when the handle is released.
The maximum pressure exerted onto the duct by the holding clamps is 230kg.
Part No.
506 100
506 200
506 300
Max. Pull Force

200kg
300kg
350kg
506 100
Max. Speed @
3hp
5hp
20m/min
29m/min
13m/min
18m/min
8m/min
11m/min
The feeder can also be supplemented with a capstan wheel that is designed for the pulling
of a pilot rope, Part No. 506 0010
506 0110
Hydraulic Power Unit for Sub-Duct Pusher

Principally designed to power the Fibre Optic cable feeder this power pack can also power
various other equipment, both supplied and not supplied by Clydesdale. Manufactured from
only the highest quality components to be robust, efficient and reliable the unit is relatively
lightweight and can be used to run such things as auger drills and earth drivers to name
but two.
The unit is both air cooled and sealed and develops either 3 or 5hp. Dimensions of the unit
are as follows 600mm long x 350mm wide x 480mm high with a weight of 39kg for the
3hp unit and 42kg for the 5hp unit.
Part No.
506 1010
506 1011
Engine
3hp
5hp
Max. Pressure
130 bar
160 bar
Max. Flow
7l/min
11l/min
Tank Cap
9l
9l
506 1010
Note: The hydraulic unit can also be supplied with an electric motor. Clydesdale can
manufacture almost any capacity, flow or output that your requirements demand.
CLYDESDALE
Powering the Future
Vibrating Cable Plough

Designed to be used in all types of soil, the plough also filters away small stones and rocks
ensuring that the furrowed trench is filled with fine earth. Despite its heavy duty trenching
capacity the plough is surprisingly gentle to cable, ensuring that no damage is done to
the cable.
The plough is fitted with a hydraulically operated support wheel to achieve the correct depth
of trench. For lateral adjustment of the depth simply turn the lever. The machine is also fitted
with vibration insulation dampers between plough and carrying vehicle.
408 000
Extensive experience has now been gained in using the vibrating cable plough on both JCB
and Volvo diggers. Should you require mounting on an alternative machine please enquire for
further details.
The speed of the machine is limited to a maximum of 40m/min on cables ranging from 8mm
to 35mm in diameter.
When installing fibre optic cable, there is an accessory device that will hydraulically feed the
cable into the plastic duct automatically in a single action. This process does however limit
cable size to 16mm in diameter.
Part No.
408 000
Weight
980kg
408 000
Static Winch Plough
Suitable for laying cables in gardens and other sensitive areas. The principle here is that an
external winch pulls the plough and the blade digs the trench, suitable winches are available
from Clydesdale.
Depth of trench is adjustable between 300mm and 650mm. If it is required to trench duct
then an accessory torpedo is available.
405 300
As an alternative to aid transportation and storage, Clydesdale has chopped this plough in
half, so that now all you need to do is bolt both halves back in place.
Part No.
405 300
405 300 ENG
405 311
10
Description
Single Section
Two Section
Torpedo
Length
2.5m fixed
1.3m x 2 sides
Weight
110kg
113kg
5kg
CLYDESDALE
Powering the Future
Link Lifters
Used as a pair in conjunction with a two-legged chain strop.
Part No.
640 930 3005
640 930 3006
Drum
400 1600mm
1800 3000mm
Max Drum Weight

6,000kg
6,000kg
Weight (Pair)
3.3kg
6.5kg
Bucket Mounted Drum Lifter

Ideal for use in depots or new locations where bucket trucks or JCBs are readily available.
Bucket sizes determine that the maximum width of drum that can be transported is 1210mm.
Kit consists of bucket attachment, chain straps and bearing mounted drum shaft. Not suitable
for road transportation under RTA regulations.
Part No.
640 930 3019
Drum
Up to 2400m
640 930 3005
Max. Drum Weight

3000kg
Rotating Drum Lifter

Simply insert the unit into the centre hole of the drum and the retractable arms will grip the
inner skirt of the drum. The inner components are mounted on bearings to allow smooth
rotation of the drum.
Part No.
640 930 2930
640 930 2945
640 930 2950
Max. Pull Force

1200kg
2200kg
4000kg
Max. Centre Hole

75mm
110mm
130mm
640 930 3019
Weight
3.5kg
8kg
20kg
Rotating Drum Lifter Feeder Arm

Designed to be used in conjunction with any of the above-mentioned Rotating Drum Lifters
although sold separately, the arm rotates with the drum allowing cable or conductor to be fed
off the drum. The arm also acts as a brake on the drum, although obviously tensioning is not
possible. Kit comprises arm and roller pieces.
640 930 2945
Part No. 640 930 2970

Lifting Shoe
Simpler version of the rotating drum lifter, works on the same principle except is not bearing
mounted.
Part No.
640 930 2955
640 930 2960
Max. Drum Weight

1300kg
2800kg
Max. Drum
400 1600mm
1100 3000mm
Weight
3.5kg
6.5kg
640 930 2970
640 930 2955

11
CLYDESDALE
Powering the Future
Cable Drum Trailers

All Cable Drum Trailers manufactured and supplied by Clydesdale are designed and tested to
comply with the latest standards. All our Cable Drum Trailers are CE marked and come
complete with a full lighting pack to allow them to be used safely and legally on highways
within the EC (should you wish use a Clydesdale Cable Drum Trailer outside of the EC then
please consult your local authorities for any specific requirement for your location).
All trailers manufactured and supplied by Clydesdale are steel welded and hot dipped
galvanised to ensure the longest possible useful life. All of our trailers are also equipped with
full road suspension with overrun (auto reverse), parking brakes and comply in full with
current RTA regulations.
All trailers are supplied with a 50mm ball coupling as standard, however, should you prefer
we offer either a 40mm or 76mm NATO eye, as alternatives.
350kg Service Cable Drum Trailer (Baby Trailer)
Used to transport and pay out service cable, the baby trailer is designed to be towed behind
a small van or car (Ford Escort or equivalent). The drum is raised / lowered by using the hand
winch which is geared so as to reduce operator fatigue. As standard the trailer is also
supplied with drum cones to secure the drum onto the drumshaft so as to ensure safe
transportation of the drums.
Unladen
Max. Drum
Part No.
Length
Width Height Weight
Dia.
Width Weight
CLY 760 260
2.2m
1.55m
0.5m
165kg
0.6m
0.5m
350kg
1,300kg Cable Drum Trailer
Ideal for use on either overhead line or underground cable installations, the 1300kg
Clydesdale trailer is simple to use and manoeuvre. The drum is raised and lowered by using
the hand winch which is geared so as to reduce operator fatigue. The rear prop legs are used
to ensure total stability when the trailer is in use.
As standard the trailer comes complete with a friction brake band which is used to control
the speed of the drum during pay out. This allows a reasonable level of tension to be
maintained on the conductor, when the trailer is used on overhead line installation.
Disc brakes can be fitted as an option for even greater control of the tension / sagging of
conductors.
Unladen
Max. Drum
Part No.
Length
Width Height Weight
Dia.
Width Weight
000 1061
2.5m
1.9m
1.8m
400kg
1.8m
1.1m 1,300kg
1,300kg Cable Drum Trailer Road / Rail Version

Based on the Clydesdale 1300kg Cable Drum Trailer, this trailer comes with the added
feature of permanently secured rail wheels. Standard UK rail gauge wheels are used. Simply
tow the trailer onto the track by means of a conventional road going vehicle and then lower
the rail wheel on to the track. The road wheels are then locked in position, which has the
secondary effect of raising the road wheels off of the ground.
Unladen
Max. Drum
Part No.
Length
Width Height Weight
Dia.
Width Weight
000 1061 R
2.6m
1.9m
1.8m
430kg
1.8m
1.1m 1,300kg
12
CLYDESDALE
Powering the Future
2,500kg Cable Drum Trailer

Specifically designed to handle the larger drums used on underground cable installations, the
drum is raised by means of a single pump handle. This pump activates both the left and right
side rams (simply adjust each side to give extra flow as required) so as to provide a smooth
and level raising of the drum.
The drum is then locked in the raised position by the locking of the rams. When you need to
lower the drum simply release the hydraulics and the drum lowers in a controlled manner.
Each trailer is supplied complete with a handy toolbox for the storage of all necessary
pins etc.
As an optional extra a drum brake can be fitted to the trailer. This comprises a disc brake
assembly which can be either fitted as a quick release device or a permanent feature.
Unladen
Max. Drum
Part No.
Length
Width Height Weight
Dia.
Width Weight
CLY 760 2500 3.3m
2.3m
1.8m
870kg
2.5m
1.4m 2,500kg
Large 3 Drum Cable Drum Trailer
000 1071 3
Probably the most innovative development to have occurred in the field of drum trailers for
years, the Clydesdale three drum trailer has revolutionised the world of three phase
conductor stringing. There is no need to have 3 separate drumstands on site, all three drums
can be handled by one easy to use, easy to tow Cable Drum Trailer.
In the past it has been necessary to have several vehicles simply to enable all of the
equipment required to be transported to the site. Now all that is required is one vehicle to tow
the three phase conductor stringing winch and one to tow the 3 Drum Cable Drum Trailer.
The trailer can be loaded, with all 3 drums, in the depot. The loading of the 3 drums should
take no more than 10 minutes, and then straight out to site for almost immediate stringing
to commence.
The trailer is a one man operation, with a centrally located operation station where control of
the individually disc braked drums can be maintained. The latest generation even comes
complete with a small engine to power the raising / lowering of the A frame to assist set up
and reduce operator effort.
If you have not seen the either of 3 Drum Cable Drum Trailers in action, simply call us so that
we may arrange an on site demonstration at your convenience.
Please note the 3 Drum Cable Drum Trailer is a patented product under Patent No.
GB 2277316A
Unladen
Max. Drum x3
Part No.
Length
Width Height Weight
Dia.
Width Weight
000 1071 3
4m
2.15m
2.3m
900kg
1.2m
1.0m
670kg
000 1061 3
3.7m
1.9m
2.3m
600kg
1.0m
0.8m
400kg
000 1061 3
13
CLYDESDALE
Powering the Future
Wire Winch Ropes

It has been proven by a wide variety of investigations that when pulling cable through a
plastic duct that the use of wire pulling bonds significantly reduces the damage to the duct,
this is predominantly due to the heat dissipation of the wire rope as opposed to a synthetic
rope. The variety and choice of wire rope bonds currently available are far too extensive to
list here, if you have a requirement that is not listed please contact us for further assistance.
Wire ropes are available with a fibre core or independent wire rope core (IWRC).
14
2 100%C, 9%M, 6%K
CLYDESDALE
Powering the Future
Pulling & Lifting
Equipment
Pulling & Lifting Equipment
CLYDESDALE
Powering the Future
Glass-fibre Duct Rod

Unlike other rodding systems available, the Clydesdale rodding system has a purpose
designed to meet the requirements of several specialist industries.
The coating of weather and cold resistant HD Polyethylene gives the rod extreme durability
and a very low co-efficient of friction.
The rod itself is available in 4 diameters 3, 6, 9 & 11mm and almost any length. Thus
allowing you to pick the perfect size for any particular job. As well as various sizes of rod there
are also 4 sizes of frame to choose from:
804
1200mm dia for use with 11mm rod
805
806
803
Plastic frame for use with 3mm rod in place of fishtape type device
A breakdown of the most common part numbers is laid out below, however almost any
variation is available on request.
3 - Loose
6 - Loose
6 - On Frame
9 - Loose
9 - On Frame
11 - Loose
11 - On Frame
30m
803 030
40m
50m
60m
80m
100m
120m
150m
200m
250m
803 040
803 050
806 040
806 050
806 060
806 080
806 100
806 040 0500 806 050 0500 806 060 0500 806 080 0500 806 100 0500
809 100
809 100
809 120
809 150
809 100 0800 809 100 0800 809 120 0800 809 150 0800
811 100
811 120
811 150
811 200
811 250
811 100 1200 811 120 1200 811 150 1200 811 200 1200 811 250 1200
Minirod
Stored in the plastic fishtape type carry case, this size of rod (3mm) does not have the
copper core, but is no less an invaluable aid when installing electrical wires in buildings,
either domestic or industrial.
800 0304
M5
800 0604
Minirod
800 0301
M6
800 0302
800 0905
800 0602
800 0601
800 0603
800 0912
800 0911
800 0602
800 0601
800 0910
800 0909
800 0902
800 0901
800 0907
800 1102
Brushes 25mm to 100mm

Part nos. 800 0906 025 to 100
800 0908
800 1101
CLYDESDALE
Powering the Future
Insulator Mounted Straight Line Roller

Specifically designed for reconductoring operations, this patented roller allows the
conductor to be brought in at final installation height. All sagging adjustments etc. can
therefore be carried out whilst the conductor is still on the rollers. At the same time the
conductor is always fully boxed in, so it cannot escape when being pulled or transferred.
CLY 680 200
The hardened alloy roller runs freely on ball race suspension minimising the tractive effort.
The insulator clamps are specially treated with rubber so as not to damage the insulators.
Roller fits all types of ceramic insulators. For 33kV installation or high uplift applications a
special conductor lifter is also available for use with this roller
Part No.
CLY 680 200
CLY 680 250
Description
Insulator Mounted Straight Line Roller
Phase Lift for CLY 680 200
Weight
3kg
1kg
Patent Ref.
GB 2169151
GB 2169151
Insulator Mounted Angle Roller

This unique patented roller has 2 adjustable angle rollers and 2 support rollers that allow
the conductor to be brought in at final installation height and adjusted to any required angle
alongside the insulator. At all times the conductor is fully boxed in and cannot escape. When
adjustments are complete the locking pins are opened and the roller removed, leaving the
conductor in its correct position on the insulator.
CLY 680 250
Ball race suspension assists smooth running of the conductor. The insulator clamps are
specially treated with rubber so as not to damage the insulators. Roller fits all types of
ceramic insulators.
Part No.
CLY 680 300
Description
Insulator Mounted Angle Roller
Weight
6kg
Patent Ref.
GB 2218858
CLY 680 300

Cross Arm Mounted Roller
This design fits all ESI cross arms. The dual pin holding facility allows the top roller to be
opened from either side, for convenient, insertion of the conductor. The uplift roller is of
hardwearing abrasion resistant nylon, while the main roller is of hardened alloy with free
running ball race suspension to minimise tractive effort. The high quality steel frame is fully
galvanised after manufacture.
The straight line roller is a solid fixture, whilst the angle version rotates through 180 with
5 fixing points +90, -90, +45, -45 and 0, thereby allowing all types of angle
installation to be carried out.
CLY 680 160
Part No.
CLY 680 160
CLY 680 170
Weight
Cross Arm Mounted Roller Straight
Cross Arm Mounted Roller Angle
Safe Working Load

3.2kg
9kg
CLY 680 170
CLYDESDALE
Powering the Future
Aerial Bundle Cable (ABC) Rollers

A range specially designed and engineered in the UK to meet all requirements of ABC
construction. Webbing straps are fitted, for details please contact Clydesdale. All rollers are
issued with a unique serial number, test certificates bearing serial number, safe working load
and proof load are issued as a matter of course. All parts are galvanised for increased life
expectancy. Cast alloy rollers are used which are mounted with ball race suspension.
Straight Line Hanging Roller

Probably the most versatile and commonly used roller mounted on any standard hook design.
This roller is ideal for straight line pulls but will accommodate slight angles.
Part No.
CLY 680 130
Weight
2.5kg
CLY 680 130
Safe Working Load

300kg
Slight Angle Roller

Designed to swing out from the pole to allow use primarily on straight line pulls but also on
slight angles. 50mm webbing strap secures roller to pole.
Part No.
CLY 680 110
Weight
7.5kg
Safe Working Load

500kg
Heavy Angle Roller

Designed to perform very similarly to the CLY 680 110 in that it swings out from the pole,
except that the second support roller gives greater strength and flexibility.
Part No.
CLY 680 120
Weight
10kg
Safe Working Load

750kg
CLY 680 110
Positioning Roller
Designed to swing into and past the pole so that the cable can be fed straight into a
suspension clamp, the most adaptable roller, as it can be used to also perform all of the
duties of the other three variations
Part No.
CLY 680 180
Weight
13.5kg
Safe Working Load

850kg
CLY 680 120
CLYDESDALE
Powering the Future
Conductor Running Out Block

Single pulley block ideal for the running out of conductors (ABC included) and the
tensioning of conductors. The moulded aluminium alloy sheave, with interchangeable nylon
protection sleeves, is mounted on ball race suspension for smooth running. Swivel hook
attachment is standard.
Part No.
CLY 681 025/1
CLY 681 025/2
CLY 681 025/3
CLY 681 025/4
CLY 680 025/2
Dimensions
Dia. of Sheave
Width of
Outside
Inside
Sheave
300mm
230mm
38mm
440mm
350mm
48mm
770mm
650mm
68mm
920mm
800mm
68mm
SWL
1200kg
1500kg
2000kg
2000kg
Weight
6.5kg
9.7kg
28.5kg
34.0kg
Heavy Duty Snatch Block

Made from high quality steel these blocks open from the side allowing easy access for the
rope. Simple locking / unlocking of this side movement allows quick erection. Swivel hook
attachment is standard.
Nylon Sheave
Part No.
CLY 681 020/0.5N
CLY 681 020/1.0N
CLY 681 020/1.5N
Dimensions
Maximum
Total
Rope Dia.
Length
18mm
305mm
18mm
315mm
20mm
330mm
Sheave
Dia.
160mm
170mm
180mm
SWL
500kg
1000kg
1500kg
Weight
1.6kg
1.7kg
2.0kg
Dimensions
Total
Length
340mm
410mm
440mm
510mm
Sheave
Dia.
180mm
220mm
240mm
290mm
SWL
1500kg
2000kg
3000kg
5000kg
Weight
3.4kg
6.6kg
7.2kg
13.0kg
Steel Sheave
CLY 680 020/1.0N
Part No.
CLY 681 020/1.5S
CLY 681 020/2S
CLY 681 020/3S
CLY 681 020/5S
Maximum
Rope Dia.
20mm
25mm
25mm
30mm
CLYDESDALE
Powering the Future
Underground Cable Roller Straight

Made from galvanised steel frame. Main roller is mounted on shielded and waterproof ball
bearings.
Part No.
CLY 682 500
Weight
5kg
Underground Cable Roller Angle

Made from galvanised steel frame. Main roller is mounted on shielded and waterproof ball
bearings.
Part No.
CLY 682 503
CLY 682 500
Weight
15kg
Cable Duct Entry Chutes

Clydesdale offers 3 variations for protecting the ductmouth straight, curved and with rollers.
All made from galvanised steel with the roller version mounted on shielded and waterproof
ball bearings
Part No.
CLY 682 507/1
CLY 682 507/2
CLY 682 507/3
CLY 682 507/4
CLY 682 507C/1
CLY 682 507C/2
CLY 682 507C/3
CLY 682 507C/4
CLY 682 508/1
CLY 682 508/2
CLY 682 508/3
CLY 682 508/4
CLY 682 508/5
CLY 682 508/6
Type
Straight
Straight
Straight
Straight
Curved
Curved
Curved
Curved
With Rollers
With Rollers
With Rollers
With Rollers
With Rollers
With Rollers
Diameter
80mm
100mm
120mm
150mm
80mm
100mm
120mm
150mm
60mm
80mm
100mm
120mm
140mm
160mm
Weight
1.7kg
2.0kg
2.5kg
2.8kg
1.7kg
2.0kg
2.5kg
2.8kg
4.0kg
4.5kg
5.0kg
6.0kg
7.0kg
7.5kg
CLY 682 503
CLY 682 507/2
CLYDESDALE
Powering the Future
Cable Stockings & Grips

Clydesdale can supply approximately 1,000 variants of the cable stocking. Indicated below
are details of our common stockings. Contained within this catalogue are details on just ten
varieties of stockings, Clydesdale has a separate leaflet specifically for cable stockings and
swivels, so if the type you require is not shown here please contact Clydesdale for the
Stockings and Swivels leaflet. Other varieties of stocking available include the following;
Double Eye
Single Eye Fleeting
Lace Up (split)
Triple Weave
Cable Stockings
Double Eye Lace Up

Sleeve (Open Ended)
Closed Loop
Threaded Anchor
Light Duty
Joining Grips
Made to Order
Non Conductive
Single Eye Stocking, Double Weave, General Duty

Cable
6 - 10
10 - 20
20 - 30
30 - 40
40 - 50
50 - 65
65 - 80
80 - 95
95 - 110
110 - 130
130 - 150
150 - 180
Part No. (prefix by CLY 000)

L = 600 (a)
L = 900 (b)
106/06
109/06
106/10
109/10
106/20
109/20
106/30
109/30
106/40
109/40
106/50
109/50
106/65
109/65
106/80
109/80
106/95
109/95
106/110
109/110
106/130
109/130
106/150
109/150
Weight (kg)
(a)
(b)
0.12
0.32
0.17
0.38
0.20
0.47
0.29
0.52
0.63
0.95
0.65
0.94
0.83
1.20
0.91
1.31
1.30
2.10
1.30
2.10
1.40
2.50
1.45
2.50
Min. Break
Load (kg)
1504
1860
2256
3696
5490
5490
7320
7320
10613
10613
10613
12736
Non Conductive Cable Stockings
Cable
10 - 20
20 - 30
SINGLE WEAVE
Single Eye
Double Eye
Part No.
Part No.
P1106/10
P1206/10
P1106/20
P1206/20
30 - 40
P1106/30
P1206/30
2688
P2106/30
40 - 50
50 - 65
65 - 80
80 - 100
P1106/40
P1106/50
P1106/65
P1106/80
P1206/40
P1206/50
P1206/65
P1206/80
2688
2688
3584
3584
P2106/40
P2106/50
P2106/65
P2106/80
Min. Break
Load (kg)
1120
1680
DOUBLE WEAVE
Single Eye Double Eye
Part No.
Part No.
P2106/10
P2206/10
P2106/20
P2206/20
Min. Break
Load (kg)
2240
3360
Weight
(kg)
0.1
0.1
P2206/30
4480
0.1
P2206/40
P2206/50
P2206/65
P2206/80
5376
7168
7168
7168
0.2
0.2
0.2
0.3
ABC Size
Applicable
2 x 35 / 50
4 x 35 / 50
2 x 70 / 95
4 x 70 / 95
4 x 120
CLYDESDALE
Powering the Future
Double Eye Stocking, Double Weave, General Duty

Cable
10 - 20
20 - 30
30 - 40
40 - 50
50 - 65
65 - 80
80 - 95
95 - 110
110 - 130

L = 600 (a)
L = 900 (b)
206/10
209/10
206/20
209/20
206/30
209/30
206/40
209/40
206/50
209/50
206/65
209/65
206/80
209/80
206/95
209/95
206/110
209/110
Min. Break
Load (kg)
1860
2256
3696
5490
5490
7320
7320
10613
10613
Weight (kg)
(a)
(b)
0.25
0.40
0.27
0.42
0.41
0.58
0.60
0.76
0.65
0.84
0.83
1.15
0.85
1.23
1.40
2.3
1.40
2.3
Triple Weave Stocking, for use when extra high loads are needed
Cable
6 - 13
12 - 19
19 - 25
25 - 32
32 - 38
38 - 48
48 - 63

Single Eye
Double Eye
TW1/FE6
TW2/FE6
TW1/FE12
TW2/FE12
TW1/FE19
TW2/FE19
TW1/FE25
TW2/FE25
TW1/FE32
TW2/FE32
TW1/FE38
TW2/FE38
TW1/FE48
TW2/FE48
Length
(mm)
700
825
1050
1300
1500
1900
1900
Min. Break
Load (kg)
2250
3380
5540
9550
11456
11456
15051
Weight
(kg)
0.22
0.39
0.80
1.50
1.96
2.10
2.20
Swivels
Clydesdale offers 2 types of Swivel Articulated and Straight Bearing. Both are manufactured
of high quality tensile steel and galvanised for long life.
Swivel
Number
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Diameter
Swivel
Rope
Straight
7
Straight
9
Straight
10
Straight
12
Straight
14
Straight
19
Straight
30
Straight
16
Straight
10
Articulated
9
Articulated
10
Articulated
15
Articulated
20
Articulated
24
Articulated
15
Length
80mm
90mm
100mm
105mm
115mm
165mm
270mm
130mm
125mm
60mm
125mm
195mm
205mm
205mm
195mm
Weight
0.2kg
0.2kg
0.3kg
0.4kg
0.5kg
1.7kg
1.8kg
0.5kg
0.5kg
0.2kg
0.5kg
1.4kg
2.9kg
3.0kg
1.5kg
SWL
500kg
1000kg
1500kg
2000kg
3000kg
6000kg
15000kg
2000kg
2000kg
800kg
2000kg
4000kg
7000kg
12000kg
4000kg
Articulated Swivel
Straight Swivel
CLYDESDALE
Powering the Future
Round Slings
Made from 100% Polyester, the round slings are light-weight, low stretch and very high in
strength. The slings are all lined for SWL identification and contain no stitching.
Colour
Violet
Green
Yellow
Grey
Red
Brown
Blue
Maximum SWL Straight Lift

1,000kg
2,000kg
3,000kg
4,000kg
5,000kg
6,000kg
8,000kg
Standard Lengths Available

1, 2, 3, 4, 5, or 6m circumference
2, 3, 4, 5, or 6m circumference
Single Thickness Sling
Double Thickness Sling
Endless Sling
Round Sling
Colour
Other strengths are available on request.
50
100
150
200
250
300
N/A
N/A
50
75
100
N/A
150
200
25
50
75
100
N/A
150
200
Violet
Green
Yellow
Grey
Red
Brown
Blue
1.0T
2.0T
3.0T
4.0T
5.0T
6.0T
8.0T
0.8T
1.6T
2.4T
3.2T
4.0T
4.8T
6.4T
2.0T
4.0T
6.0T
8.0T
10.0T
12.0T
16.0T
1.8T
3.6T
5.4T
7.2T
9.0T
10.8T
14.4T
1.4T
2.8T
4.2T
5.6T
7.0T
8.4T
11.2T
1.0T
2.0T
3.0T
4.0T
5.0T
6.0T
8.0T
CLYDESDALE
Powering the Future
Pulling Ropes
Clydesdale is able to supply a vast variety of pulling ropes both synthetic and wire. Used for
many purposes from sash line to winch bonds. If the rope that you require is not mentioned
here please contact us for further assistance. It is not standard practice for Clydesdale to test
certificate rope, however if you require this please state accordingly when ordering.
Synthetic Sash Line Ropes
Synthetic ropes supplied by Clydesdale fall into 2 main categories Sash Line and Winch
Bonds. For sash line, what is required is a rope that is easy to manipulate, loop etc. but that
is also easy to handle. As such we have tended to supply a basic hempex rope for sash line
This rope is constructed from three strands making the tying of knots simple and aiding the
looping of the rope through shackles, pulley blocks etc.
Part No.
CLY 913 03 16
CLY 913 03 24
CLY 913 03 32
CLY 913 03 40
16mm
24mm
32mm
40mm
MBL
2,180kg
4,830kg
8,300kg
12,900kg
Weight / 100m
10.4kg
23.0kg
40.1kg
62.3kg
Synthetic Winch Ropes

Obviously this is the area in which Clydesdale has the most experience, having supplied
cable-pulling winches for over 20 years. When selecting a winch rope you should consider
three critical areas, strength, stretch and wear. Over the years Clydesdale has evaluated
many manufacturers variations and we are confident that the rope which we supply for this
purpose, Paracore is of the highest possible specification. With a stretch characteristic of less
than 4%. Offering excellent UV resistance this rope consists of a core of low twist parallel
yarns of high tenacity polyester fibre tightly encased in a 16, 24 or 32 plait ( dependant).
Abrasion resistant polyester outer cover gives exceptional strength to weight ratio with
extremely low elongation for a polyester rope (never more than 4%). Paracore has a relative
density of 1.38 and can be used in extremes of temperature from -70C to +200C, however,
extremely high temperatures (over 100C) will reduce MBL. Paracore is supplied as standard
with soft eyes at each end unless requested otherwise.
Part No.
Colour
MBL
Weight / 100m
Winch
CLY 913 01 07 B
7mm
Black
2,000kg
4.2kg
900 3 Phase
CLY 913 01 07 R
7mm
Red
2,000kg
4.2kg
900 3 Phase
CLY 913 01 07 W
7mm
White
2,000kg
4.2kg
900 3 Phase
CLY 913 01 08
8mm
White
2,500kg
5.0kg
210
CLY 913 01 10 B
10mm
Black
3,250kg
6.6kg
902 / 2240 3 Phase
CLY 913 01 10 R
10mm
Red
3,250kg
6.6kg
902 / 2240 3 Phase
CLY 913 01 10 W
10mm
White
3,250kg
6.6kg
902 / 2240 3 Phase
CLY 913 01 12
12mm
White
4,080kg
7.9kg
Certain other winching activities require a larger diameter synthetic winch rope, for these requirements
Clydesdale suggests Dyneema, probably the highest specification of rope currently available, in terms
of strength, wear and stretch.
Part No.
CLY 913 02 16
CLY 913 02 20
CLY 913 02 24
16mm
20mm
24mm
MBL
12,000kg
19,000kg
25,500kg
Weight / 100m
17.5kg
28.0kg
38.9kg
CLYDESDALE
Powering the Future
X-Arm Lifter
CLY 1019
Designed to lift any X-Arm easily and smoothly without undue effort from the construction
crew. This device makes new construction or refurbishment of overhead lines safer and
simpler. If the bracket is used (extra cost) the X-Arm can also be balanced to avoid any sway
whatsoever.
Part No. CLY 1019
Double X-Arm Lifter

CLY 1020
Specifically designed for use on the new ESI 43-40 type of X-Arm, the Double X-Arm Lifter
is an invaluable tool. Its double action allows erection of 2 X-Arms without alteration of its
position. The bracket is supplied as part of the lifter to enable parallel lifting, improving safety
and reducing damage that may be caused.
Part No.
Description
Weight
SWL
Bracket
CLY 1019
X-Arm Lifter
7.5kg
150kg
CLY 1018
CLY 1020
Double X-Arm Lifter
18kg
300kg
Included
Conductor Lifter
This appliance has been specially devised to facilitate the replacement of old or damaged
insulators. The unit fixes directly onto the X-Arm. A built in ratchet puller allows the conductor
to be lifted effortlessly clear of the insulator and then lowered back into place. Fully
galvanised high quality steel.
Part No.
CLY 1021
Weight
SWL
Max. Lift
9kg
250kg
540mm
CLY 1104
Pole Lifting Jack
When you need to remove old or decayed poles, there are 2 versions of our Pole Lifting Jack
available. Firstly the vehicle driven unit which will work off the hydraulic system of your truck.
We will need to know various details as all are made to order. Secondly, a manually operated
version which can be set up almost anywhere. Both versions are set to have a lifting
force of 10,000kg, however, as each item is made to suit, further details are available
upon request.
Part No. CLY 1104 Manually operated
CLY 1104A Vehicle driven
Transformer Lifting Gin
Top and bottom welded attachment rings make it easy to hoist the Lifting Gin to working
height. The quick release nylon webbing straps are then ratchet tightened to secure the unit.
The top section is hinged to allow the wire lifting rope to pass through and over 2 lifting
pulleys, the rope is then locked in place with the locking pins and chains. The transformer is
then hoisted to the required height, and as the bearing arm rotates through 180 the
transformer can be lowered exactly into place. The alloy rollers run on ball race suspension
to reduce tractive effort.
10
Part No.
Weight
SWL
CLY 1022
17.5kg
1,000kg
Max. Wire Rope Dia

12mm
CLYDESDALE
Powering the Future
Ratchet Puller / Pull-Lifts

Fundamentally there are three types of pull-lift currently available, Clydesdale is able to
supply all three varieties, these are Wire Rope, Chain & Webbing. Each type has its own
advantages and disadvantages, a brief summary of these advantages is laid out below;
Wire Rope
Chain
Webbing
Lightweight
Industry Standard
Very Lightweight
Compact
Wide Variety
Visible
Easy to Maintain
Incredibly Robust
Live Working Applications
Once you have selected the type of pull lift that suits your requirements please select model
from table. Other makes / sizes are also available including Yale, Lung-All and Little Mule,
please ask for further details.
Part No.
Type
Standard Lift
Weight
SWL (Lift)
CLY 700 Y11-25
Chain Block
1.0m
2.0kg
250kg
CLY 700 500
Wire Rope
1.3m
2.4kg
500kg
CLY 700 N500
Webbing
1.2m
2.8kg
500kg
Chain Block
1.5m
3.6kg
500kg
CLY 700 Y11-50

CLY 700 750
Chain Pull-Lift
1.0m
4.1kg
750kg
CLY 700 Y11-80
Chain Block
1.5m
6.2kg
800kg
CLY 700 1000
Wire Rope
1.2m
3.1kg
1000kg
CLY 700 N1000
Webbing
1.0m
3.2kg
1000kg
CLY 700 N1000P
Webbing
1.5m
3.3kg
1000kg
CLY 700 N1500
Webbing
1.0m
4.5kg
1500kg
CLY 700 N1500P
Webbing
1.5m
4.6kg
1500kg
CLY 700 P1500
Wire Rope
1.5m
4.1kg
1500kg
CLY 700 P1500P
Wire Rope
3.0m
5.0kg
1500kg
CLY 700 Y11-16
Chain Block
1.5m
9.5kg
1600kg
CLY 700 Y11-32
Chain Block
1.5m
15.5kg
3200kg
CLY 700 Y11-63
Chain Block
1.5m
26.5kg
6300kg
Note: Not to Scale
700 N1000
700 Y11-50
Dynamometers
These truly compact dynamometers are astonishingly small in size and weight, yet big on
performance and accuracy. The accuracy is stated at 3% full scale.
Part No.
CLY 940 A01
Capacity
Graduation
Weight
100kg
2kg
0.8kg
CLY 940 A05
500kg
10kg
0.7kg
CLY 940 A10
1000kg
20kg
0.8kg
CLY 940 A20
2000kg
50kg
1.2kg
CLY 940 A30
3000kg
50kg
2.3kg
CLY 940 A50
5000kg
100kg
3.5kg
700 1000
940 A20
Digital Dynamometers
Highly accurate (0.3%) and lightweight, this dynamometer is ideally suited for those
environments where accurate measurements are required. Details are provided of our most
common variant, other sizes and specifications are available upon request. Supplied in
wooden carry box with two shackles.
Part No.
CLY 940 300029
Capacity
Graduation
Weight
12KN
100N
3.5kg
940 300 029
11
CLYDESDALE
Powering the Future
Chicago Grips Grips for Large-Diameter Conductors

Each of these grips is custom finished to cable specifications. Designed for hollow conductors
and other large-diameter cables, the round jaws of these grips are shaped to provide
maximum contact with the circumference of the cable, virtually eliminating conductor
damage. Because we hold these grips in blank and finish each grip to your specs, allow 60
to 90 days for delivery. Since these grips are made to special order, they are not returnable.
Part No. 1628-50 is furnished with removable floating jaw which allows maximum coverage
of cables and minimal conductor damage, particularly under heavy load. The removable jaw
is held in place by a bolt swaged into the lever arm of grip, secured by a nut and cotter pin.
Jaw must be removed to insert cable.
Your order must specify exact outside diameter of cables, circular mill with strand
combination or manufacturers code. Each grip for large diameter cable is made for one-size
cable only.
Minimum*
Cable
Maximum*
Cable
SWL
1628-16P
7.87mm
22.35mm
2500kg
7.73kg
1628-30
21.59mm
31.50mm
2500kg
12.27kg
1628-40
31.50mm
39.12mm
2500kg
15.45kg
1628-50
25.40mm
46.23mm
2500kg
15.45kg
Part No.
Approx. Weight
Each
*Minimum-maximum sizes listed indicate the unfinished size range capability for each Cat. No. Each
grip is finished to fit one specific cable size only within range shown.
Grips for Bare A.C.S.R., Aluminium and Stranded-Copper Cables

The round, smooth inside conductor jaw on this series of grips is ideal for bare A.C.S.R.,
aluminium and stranded-copper cables. The smooth jaw grips with maximum contact and are
less likely to damage conductors.
1656-30
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1656-20
5.08mm
10.16mm
900kg
1.36kg
10.2cm
1656-30
7.87mm
13.46mm
900kg
1.70kg
12.1cm
1656-40
13.46mm
18.80mm
1600kg
3.41kg
14.0cm
1656-50
18.8mm
21.84mm
1600kg
3.41kg
14.0cm
1656-60
21.84mm
24.38mm
1600kg
3.41kg
14.0cm
Grips for Aluminium Conductors

Lightweight grips designed for use on aluminium conductors in distribution work. Round jaw
shaped to provide maximum contact with circumference of cable, less likely to damage
conductors. Supplied with spring and locking loop handles, allowing jaws to be held in an
open position for easier placement on cable.
1678-30
12
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1678-20
24.38mm
25.91mm
1600kg
3.41kg
14.0cm
1678-30
25.91mm
27.43mm
900kg
3.41kg
14.0cm
1678-40
27.43mm
28.96mm
900kg
3.41kg
14.0cm
1678-50
28.96mm
30.48mm
900kg
3.41kg
14.0cm
CLYDESDALE
Powering the Future
Grip for Bare Wire

A lightweight, especially economical grip for working with solid and stranded bare wire from
2mm to 5.1mm. Single V groove jaw.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1613-30
2.03mm
5.08mm
250kg
0.68kg
7.6cm
1613-30
Grips for Weatherproof Wire

Round inside jaw contour for weatherproof coated wire. Notches in jaw provide firm grip on
insulation.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1611-20
5.08mm
10.16mm
900kg
1.36kg
10.2cm
1611-30
7.87mm
13.46mm
900kg
1.70kg
12.1cm
1611-40
13.46mm
18.8mm
1600kg
3.52kg
14.0cm
1611-50
19.81mm
22.35mm
1600kg
3.52kg
14.0cm
1611-30
Note: Due to various types of weatherproof coatings available, selection of proper grips is
determined by outside diameter of cable.
Grips for PVC-Covered Conductors
The serpentine jaws of this grip series are specially machined to allow insertion of insulated
conductor through the jaws, which reduce danger of slippage which might result in insulation
damage. Eliminates necessity of stripping insulation from conductor. Round inside-jaw
contour.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1659-20
5.08mm
10.67mm
900kg
1.36kg
10.2cm
1659-30
7.87mm
12.70mm
900kg
1.70kg
12.1cm
1659-40
12.45mm
20.07mm
1600kg
3.52kg
14.0cm
1659-50
20.07mm
25.65mm
1600kg
3.52kg
14.0cm
1659-30
Parallel Jaw Grips

These lightweight, compact grips pull an exceptionally wide range of cable sizes and types.
Each grip is designed with round inside-jaw contours. The lower jaw is serrated to firmly
grip insulated cables and conductors. The design includes a latch that prevents the grip from
falling in case of jaw disengagement from the cable, plus a large-diameter eye that
accommodates large hooks on hoists, winches and tackle blocks.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1685-20
4mm
22mm
900kg
1.3kg
6.0cm
1685-31
16mm
32mm
1600kg
2.3kg
11.43cm
1685-20
13
CLYDESDALE
Powering the Future
Grips for Extra-High-Strength Cables, Messenger, Guy Strand and Conductors

A family of grips for cable sizes from 3.10mm to 25.4mm. Double V grooves give four-point
contract, reducing chance of slipping and providing proper alignment. For larger conductors,
see our grips with round inside-jaw contour.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1613-40
3.05mm
9.4mm
900kg
1.36kg
10.2cm
1684-5
5.54mm
13.97mm
1600kg
2.84kg
12.7cm
1692-5
5.54mm
13.97mm
1600kg
2.89kg
12.7cm
1684-5F*
4.06mm
13.97mm
1600kg
7.05kg
18.4cm
1628-16
7.87mm
15.75mm
2500kg
7.05kg
18.4cm
1628-17
12.7mm
19.05mm
2500kg
7.73kg
18.4cm
1628-18
19.05mm
25.4mm
2500kg
7.73kg
18.4cm
*Similar to No. 1684-5 above except with a file inserted in jaw for extra gripping power.
Replacement file No. 578 and screws No. 573 are also available.
Hot-Line Grips for Bare Conductors
1613-40H
Hot-Line Grips for both bare and insulated conductors. Grip may be placed on wire with hotline stick. When stick is removed, latch closes automatically to guard against grip accidentally
disengaging from wire. Standard hot-line grips are not supplied with springs or lock-open
features. When these features are desired, add prefix letter S before part number (example:
S1684-5H).
Part No.*
Minimum
Cable
Maximum
Cable
1613-40H
3.05mm
9.4mm
900kg
1.48kg
10.2cm
1684-5H
5.54mm
13.97mm
1600kg
2.84kg
12.7cm
1656-20H
5.08mm
10.16mm
900kg
1.48kg
10.2cm
1656-30H
7.87mm
13.46mm
900kg
1.82kg
12.1cm
1656-40H
13.46mm
18.8mm
1600kg
3.52kg
14.0cm
1656-50H
18.8mm
21.84mm
1600kg
3.52kg
14.0cm
1656-60H
21.84mm
24.84mm
1600kg
3.41kg
14.0cm
SWL
Approx. Weight
Each
Jaw
Length
Klein Haven Grips

Designed for use when light, compact grip is desired and where conductor damage is not
a factor. Gripping pressure of the knurled jaw is applied to a 6.35mm cable area.
1604-20L and 1625 series have a swing latch to help hold cable in the jaw.
1604-20
14
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
1604-10
1.52mm
6.35mm
450kg
0.45kg
1604-20
3.18mm
12.7mm
900kg
1.14kg
1604-20L
3.18mm
12.7mm
900kg
1.14kg
1625-20
7.11mm
19.05mm
1600kg
1.50kg
1625-20 7/8
9.65mm
22.35mm
1600kg
1.59kg
1625-20 1
12.7mm
25.4mm
1600kg
1.59kg
CLYDESDALE
Powering the Future
Bell-System Type Grips

1684-5AT is identical to Bell-System type L strand puller; 1628-16AT is identical to
Bell-System H strand puller. All are equipped with chain, toggle and shackle.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1684-5AT
5.54mm
13.97mm
1600kg
2.84kg
12.7cm
1628-16AT
7.87mm
15.75mm
2500kg
7.05kg
18.4cm
1692-5AT
5.54mm
13.97mm
1600kg
2.89kg
12.7cm
1684-5AT
Type B Strand Puller

This grip is similar to Bell-System Type B Strand Puller. Designed to pull 6.35mm figure-8
telephone cable. Serpentine grooves grip insulation on strand, preventing slippage. Equipped
with chain, toggle and shackle.
Part No.
Minimum
Cable
Maximum
Cable
SWL
Approx. Weight
Each
Jaw
Length
1659-5AT
5.08mm
9.4mm
900kg
2.72kg
12.7cm
Range Taking ABC Come Along Clamp
1659-5AT
Rather than having a multitude of Come Alongs for the various sizes of Aerial Bundled
Conductor, this clamp will cover nearly all of the sizes in one clamp. Sizes covered are 2 core
35mm, 50mm, 95mm and 120mm and all 4 and 5 core variants.
Part No.
CLY 920 1174
SWL
850kg
Weight
3kg
Come Along Clamps for ABC

Made of steel with fine grooved aluminium jaws that give a strong and safe grip on the
conductor. Each clamp is specifically finished to match the size of Aerial Bundled Conductor.
Part No.
CLY 920 0625
CLY 920 0650
CLY 920 0695
ABC Size
4 x 25
4 x 50
4 x 95
SWL
300kg
600kg
850kg
920 1174
Weight
2.2kg
3.6kg
4.7kg
Come Along Clamps for Steel Stay Wire & Copper Conductor
Made of forged steel with fine grooved jaws. A built in spring holds the grip in position even
when there is no pulling force applied.
Part No.
CLY 920 4101
CLY 920 4102
CLY 920 4103
CLY 920 4104
CLY 920 4105
Cable
1 - 4mm
3 - 8mm
5 - 10mm
8 - 16mm
14 - 23mm
SWL
200kg
700kg
1100kg
1400kg
2000kg
Weight
0.25kg
0.95kg
1.15kg
1.95kg
3.50kg
920 0695
920 4102
15
CLYDESDALE
Powering the Future
Lubricants
Clydesdale supplies various types of lubricants to assist the pulling, jetting, blowing and
general installation of cables. The significant part of our range of lubricants is illustrated
below in relatively brief terms, further details including COSHH / MSDS are available upon
request.
Silicone Plus Cable Pulling Lubricant

A cream coloured pourable lubricant specially formulated to assist the pulling of cables into
plastic ducts. Supplied either with (NN) or without (NB) small frictionless roller balls as part of
its make up, Silicone Plus is, despite its name free of any wax, silicone or grease and as such
will degrade naturally. Also available in a winter grade formulation for use at extremes of
temperature. Silicone Plus will cause absolutely no damage to the cable sheathing.
Part No.
CLY 745 NN-19
CLY 745 NB-19
CLY 745 WN-19
CLY 745 WB-19
745 NB-19
With Balls
No
Yes
No
Yes
Pack Size
36 x 19L
36 x 19L
36 x 19L
36 x 19L
Temp Range
-5C to +45C
-5C to +45C
-30C to +45C
-30C to +45C
Jetlube Cable Blowing / Jetting Lubricant

Specifically designed to be used whilst blowing cables into air tight ducts, Jetlube reduces
the frictional drag on both cable and duct thus increasing the installed distance significantly.
Jetlube can also be used to pre-lubricate the duct prior to the blowing process commencing,
this will have the effect of cleaning the duct. Jetlube can also be used to pre-lubricate a duct
prior to PULLING in a cable thus avoiding burn-through when a synthetic rope is being used.
Also available in a winter grade formulation for use at extremes of temperature. Jetlube will
cause absolutely no damage to the cable sheathing.
Part No.
CLY 745 JL-95
CLY 745 JW-95
745 JL-95
16
Pack Size
12 x 95cL
12 x 95cL
Temp Range
-5C to +45C
-30C to +45C
CLYDESDALE
Powering the Future
Cleaners
Clydesdale supplies many different types of cleaner for both the cleaning of cables, ducts,
hotsticks, as well as more general purpose cleaners.
S-1 Hotstick Wipe
It is commonly recognised that all tools will last longer if they are cared for and cleaned by
the operator. The S-1 Silicon wipe is the ideal tool for the care of hotsticks. The wipe removes
any foreign material and leaves a silicon residue on the hotstick stick itself. The silicon
residue causes water to bead up thus ensuring safe use. Each wipe comes in a convenient
one-time use pocket and should be discarded properly after use.
Part No.
CLY 745 S-1
Pack Size
144 Wipes
745 S-1
W-1 Wax Wipe

A more general-purpose wipe, used to clean and care for general tools, the W-1 leaves a
non-conductive water coating on the surface of the cleaned item. Also suitable for the
cleaning of rubber and porcelain items.
Part No.
CLY 745 W-1
Pack Size
72 Wipes
745 W-1
FST Duct Sealant Kit

There are a number of reasons why it may be necessary to seal a duct, to stop water ingress
and containment of rodents to name but two, the FST Duct Sealant Kit is a proven method.
Simply insert the two foam blocks into the end of the ducts, one further into the duct and one
at the edge, then inject the two-part foam formulation into the resulting gap. The two-part
foam will set almost immediately to quickly and permanently seal your duct.
Each kit comprises: 1 x 6oz cartridge (FST-180), 2 x 24" Foam damming strips (FST-DAM),
3 x Mixing nozzles, 1 x Pair disposable gloves, 1 x Positioning rod for foam dam, 1 x Pretreating wipe (CD-1), 1 x Resealing cap & 1 x Instruction sheet
Part No. CLY 745 FST
745 FST
17
3 Pantone Reflex Blue
CLYDESDALE
Powering the Future
Insulated Tools
Insulated
Tools
CLYDESDALE
Powering the Future
A range of Insulated Hand Tools Designed, Tested and Approved / Certified to Industry,
National and European Standards. This range of tools offers 6 key safety characteristics;
1 A white shell is moulded onto the metal parts of the tool. This insulating shell is both
unbreakable and irremovable, and ensures, instantaneously and permanently, total
insulation of the tool.
2 The orange coloured PVC which covers the shell coated tool is totally irremovable,
non-flammable and ensures a perfect grip of the tool when held.
3 Coating the handles with ridge marks ensures a perfect grip of the tool when held with
greasy hands or gloves.
4 The two finger stop (or Buffers) (where used) are made from treated Rilsan, which has
insulation properties in excess of 15,000 Volts.
5 The end of the handles are reinforced with several layers of PVC onto the shell, in order
to withstand the highest of impacts.
6 All insulating properties are guaranteed for temperatures from -20C to +60C
(-4F to 140F).
The exceptional quality of this range of Insulated Tools ensures their use over many years.
Every Insulated Tool within this range undergoes 7 separate tests prior to the end of the
manufacturing process thus allowing us to offer a full guarantee on each and every tool. This
range of Insulated Hand Tools complies with the following standards;
EN 60900, ESI 26-3, VDE 0680 & NFC 18-400
Cut through view
Insulated Reversible Ratchet Wrench

Available in 1/4", 3/8" and 1/2" square drive formats. These tools are made from forged alloy
steel with a high carbon content. Drive direction controlled by a central control, these Ratchet
Drivers feature 17 separate tooth engagements when the force is being applied.
Part No.
Drive Size
Torque
Length
Weight
CLY 350 MS55
1/4" Sq.
7Nm
125mm
140g
CLY 350 MS85
3/8" Sq.
20Nm
185mm
250g
CLY 350 MS65
1/2" Sq.
35Nm
255mm
580g
MS55
Insulated Torque Wrench

Featuring a linear graduation allowing simple and accurate reading of the toque during
adjustment. These tools are extremely light and robust as the main body is made from
aluminium alloy. The graduation is clearly marked in both Imperial and Metric units of
measurement (lbf and Nm), also there is an auto reset function. Designed to be used in
conjunction with our range of drive enlargers and reducer allowing these tools to be used with
an extremely large range of head types. Further specifications available upon request.
MS100
Part No.
Drive Reversible
Torque Range
Length
Weight
CLY 350 MS100
3/8"
No
8-54Nm
5-40lbf
330mm
850g
CLY 350 MS100R
3/8"
Yes
8-54Nm
5-40lbf
330mm
850g
CLY 350 MS100N2 1/2"
No
30-150Nm
20-110lbf
450mm
930g
CLYDESDALE
Powering the Future
Insulated T Bar Driver

These tools are forged from high strength chromium alloy steel.
MS72S
Part No.
Drive
Length
Weight
CLY 350 MS72J-130
3/8"
130mm
380g
CLY 350 MS72J-206
3/8"
206mm
420g
CLY 350 MS72S
1/2"
310mm
800g
Insulated Drive Enlarger

Designed to allow different drive size socket heads to be used on a single Ratchet Wrench
simply by adding the chosen enlarger to the drive pin of the ratchet and thus changing the
drive size. These tools are forged from high strength chromium alloy steel.
MS70
Part No.
From
To
Length
Weight
CLY 350 MS95
1/4"
3/8"
50mm
20g
CLY 350 MS91
3/8"
1/2"
64.5mm
40g
Insulated Drive Reducer

Designed to allow different drive size socket heads to be used on a single Ratchet Wrench
simply by adding the chosen reducer to the drive pin of the ratchet and thus changing the
drive size. These tools are forged from high strength chromium alloy steel.
Part No.
From
To
Length
Weight
CLY 350 MS70
1/2"
1/4"
75mm
60g
CLY 350 MS90
1/2"
3/8"
68mm
40g
CLY 350 MS96
3/8"
1/4"
64mm
20g
Insulated Ratchet Extension Bar

Used to extend the reach of the Ratchet Wrench, these extension bars simply snap onto the
drive pin. These tools are forged from high strength chromium alloy steel.
MS71
Part No.
Drive
Length
Weight
CLY 350 MS54
1/4"
114mm
50g
CLY 350 MS54L
1/4"
164mm
70g
CLY 350 MS84
3/8"
140mm
124g
CLY 350 MS84L
3/8"
264mm
270g
CLY 350 MS71
1/2"
144mm
245g
CLY 350 MS71L
1/2"
264mm
435g
CLYDESDALE
Powering the Future
Insulated 1/4" Square Drive Socket Heads

Metric Sizes
Part No.
Size
Length
Weight
CLY 350 MS56-04
4mm
38mm
10g
CLY 350 MS56-05
5mm
38mm
12g
5.5mm
38mm
14g
CLY 350 MS56-06
6mm
38mm
16g
CLY 350 MS56-07
7mm
38mm
18g
CLY 350 MS56-08
8mm
38mm
20g
CLY 350 MS56-09
9mm
38mm
22g
CLY 350 MS56-10
10mm
38mm
24g
CLY 350 MS56-11
11mm
38mm
26g
CLY 350 MS56-12
12mm
38mm
28g
CLY 350 MS56-13
13mm
38mm
30g
CLY 350 MS56-14
14mm
38mm
32g
Part No.
Size
Length
Weight
CLY 350 MS56-W03
3/16"
38mm
12g
CLY 350 MS56-05.5
MS56
Imperial Sizes
CLY 350 MS56-W04
1/4"
38mm
16g
CLY 350 MS56-W05
5/16"
38mm
20g
CLY 350 MS56-W06
3/8"
38mm
24g
CLY 350 MS56-W07
7/16"
38mm
28g
CLY 350 MS56-W08
1/2"
38mm
30g
CLY 350 MS56-W09
9/16"
38mm
32g
Insulated 1/4" Square Drive Male Hex Key (Allen) Heads

Metric Sizes
Part No.
Size
Length
Weight
CLY 350 MS57-03
3mm
58.5mm
16g
CLY 350 MS57-04
4mm
58.5mm
18g
CLY 350 MS57-05
5mm
58.5mm
20g
CLY 350 MS57-06
6mm
58.5mm
22g
CLY 350 MS57-07
7mm
58.5mm
24g
MS57
Imperial Sizes
Part No.
Size
Length
Weight
CLY 350 MS57-W02
1/8"
58.5mm
16g
CLY 350 MS57-W03
3/16"
58.5mm
20g
CLY 350 MS57-W04
1/4"
58.5mm
24g
CLY 350 MS57-W05
5/16"
58.5mm
26g
CLYDESDALE
Powering the Future

Metric Sizes
MS86
Part No.
Size
Length
Weight
CLY 350 MS86-08
8mm
40.5mm
35g
CLY 350 MS86-09
9mm
40.5mm
35g
CLY 350 MS86-10
10mm
40.5mm
40g
CLY 350 MS86-11
11mm
40.5mm
40g
CLY 350 MS86-12
12mm
40.5mm
40g
CLY 350 MS86-13
13mm
43.5mm
45g
CLY 350 MS86-14
14mm
43.5mm
45g
CLY 350 MS86-15
15mm
43.5mm
45g
CLY 350 MS86-16
16mm
43.5mm
50g
CLY 350 MS86-17
17mm
43.5mm
50g
CLY 350 MS86-18
18mm
46.5mm
70g
CLY 350 MS86-19
19mm
46.5mm
70g
CLY 350 MS86-20
20mm
46.5mm
80g
CLY 350 MS86-21
21mm
46.5mm
110g
CLY 350 MS86-22
22mm
46.5mm
120g
CLY 350 MS86-23
23mm
46.5mm
130g
Imperial Sizes
MS86
Part No.
Size
Length
Weight
CLY 350 MS86-W05
5/16"
40.5mm
35g
CLY 350 MS86-W06
3/8"
40.5mm
40g
CLY 350 MS86-W07
7/16"
40.5mm
40g
CLY 350 MS86-W08
1/2"
43.5mm
45g
CLY 350 MS86-W09
9/16"
43.5mm
45g
CLY 350 MS86-W10
5/8"
43.5mm
50g
CLY 350 MS86-W11
11/16"
43.5mm
50g
CLY 350 MS86-W12
3/4"
46.5mm
70g
CLY 350 MS86-W13
13/16"
46.5mm
110g
CLY 350 MS86-W14
7/8"
46.5mm
120g
CLYDESDALE
Powering the Future
Insulated 3/8" Square Drive Socket Heads Long Series

MS86L
Metric Sizes
Part No.
CLY 350 MS86L-08
CLY 350 MS86L-09
CLY 350 MS86L-10
CLY 350 MS86L-11
CLY 350 MS86L-12
CLY 350 MS86L-13
CLY 350 MS86L-14
CLY 350 MS86L-15
CLY 350 MS86L-16
CLY 350 MS86L-17
CLY 350 MS86L-18
CLY 350 MS86L-19
CLY 350 MS86L-21
CLY 350 MS86L-22
Size
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
21mm
22mm
Length
67.5mm
67.5mm
67.5mm
67.5mm
67.5mm
67.5mm
73.5mm
73.5mm
73.5mm
80.5mm
80.5mm
80.5mm
80.5mm
80.5mm
Weight
50g
55g
60g
70g
70g
80g
90g
100g
120g
150g
160g
170g
210g
225g
Imperial Sizes
Part No.
CLY 350 MS86L-W05
CLY 350 MS86L-W06
CLY 350 MS86L-W07
CLY 350 MS86L-W08
CLY 350 MS86L-W09
CLY 350 MS86L-W10
CLY 350 MS86L-W11
CLY 350 MS86L-W12
CLY 350 MS86L-W13
CLY 350 MS86L-W14
Size
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
Length
67.5mm
67.5mm
67.5mm
67.5mm
73.5mm
73.5mm
80.5mm
80.5mm
80.5mm
80.5mm
Weight
50g
60g
70g
75g
90g
120g
150g
170g
210g
225g
MS86L
MS87

Metric Sizes
Part No.
CLY 350 MS87-03
CLY 350 MS87-04
CLY 350 MS87-05
CLY 350 MS87-06
CLY 350 MS87-07
CLY 350 MS87-08
CLY 350 MS87-10
Size
3mm
4mm
5mm
6mm
7mm
8mm
10mm
Length
64mm
64mm
64mm
64mm
69mm
69mm
69mm
Weight
40g
40g
50g
50g
50g
60g
60g
Imperial Sizes
Part No.
CLY 350 MS87-W02
CLY 350 MS87-W03
CLY 350 MS87-W04
CLY 350 MS87-W05
CLY 350 MS87-W06
Size
1/8"
3/16"
1/4"
5/16"
3/8"
Length
55mm
55mm
55mm
60mm
60mm
Weight
40g
50g
50g
60g
60g
MS87
CLYDESDALE
Powering the Future

MS66
MS66
Metric Sizes
Part No.
CLY 350 MS66-08
CLY 350 MS66-09
CLY 350 MS66-10
CLY 350 MS66-11
CLY 350 MS66-12
CLY 350 MS66-13
CLY 350 MS66-14
CLY 350 MS66-15
CLY 350 MS66-16
CLY 350 MS66-17
CLY 350 MS66-18
CLY 350 MS66-19
CLY 350 MS66-20
CLY 350 MS66-21
CLY 350 MS66-22
CLY 350 MS66-23
CLY 350 MS66-24
CLY 350 MS66-25
CLY 350 MS66-26
CLY 350 MS66-27
CLY 350 MS66-28
CLY 350 MS66-29
CLY 350 MS66-30
CLY 350 MS66-32
Size
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
21mm
22mm
23mm
24mm
25mm
26mm
27mm
28mm
29mm
30mm
32mm
Length
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
52mm
54mm
54mm
54mm
54mm
54mm
56mm
56mm
56mm
58mm
60mm
Weight
60g
60g
60g
60g
80g
80g
80g
80g
80g
80g
80g
100g
100g
100g
120g
120g
140g
140g
160g
160g
160g
160g
180g
200g
Imperial Sizes
Part No.
CLY 350 MS66-W03
CLY 350 MS66-W04
CLY 350 MS66-W05
CLY 350 MS66-W06
CLY 350 MS66-W07
CLY 350 MS66-W08
CLY 350 MS66-W09
CLY 350 MS66-W10
CLY 350 MS66-W11
CLY 350 MS66-W12
CLY 350 MS66-W13
CLY 350 MS66-W14
CLY 350 MS66-W15
CLY 350 MS66-W16
CLY 350 MS66-W17
CLY 350 MS66-W18
CLY 350 MS66-W20
Size
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1 1/16"
1 1/8"
1 1/4"
Length
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
Weight
50g
50g
60g
60g
60g
80g
80g
80g
80g
100g
100g
100g
140g
160g
160g
160g
200g
CLYDESDALE
Powering the Future
Insulated 1/2" Square Drive Socket Heads Long Series

Metric Sizes
Part No.
Size
Length
Weight
CLY 350 MS66L-12
12mm
96mm
120g
CLY 350 MS66L-13
13mm
96mm
120g
CLY 350 MS66L-14
14mm
96mm
140g
CLY 350 MS66L-15
15mm
96mm
140g
CLY 350 MS66L-16
16mm
96mm
140g
CLY 350 MS66L-17
17mm
96mm
160g
CLY 350 MS66L-18
18mm
96mm
160g
CLY 350 MS66L-19
19mm
96mm
160g
CLY 350 MS66L-21
21mm
96mm
240g
CLY 350 MS66L-22
22mm
96mm
280g
CLY 350 MS66L-23
23mm
96mm
320g
CLY 350 MS66L-24
24mm
96mm
340g
CLY 350 MS66L-26
26mm
96mm
420g
CLY 350 MS66L-27
27mm
96mm
420g
CLY 350 MS66L-28
28mm
96mm
420g
CLY 350 MS66L-29
29mm
96mm
420g
CLY 350 MS66L-30
30mm
96mm
460g
CLY 350 MS66L-32
32mm
96mm
500g
Part No.
Size
Length
Weight
CLY 350 MS66L-W08
1/2"
90mm
120g
CLY 350 MS66L-W09
9/16"
90mm
135g
CLY 350 MS66L-W10
5/8"
90mm
145g
CLY 350 MS66L-W11
11/16"
90mm
160g
CLY 350 MS66L-W12
3/4"
90mm
170g
CLY 350 MS66L-W13
13/16"
90mm
220g
CLY 350 MS66L-W14
7/8"
100mm
270g
CLY 350 MS66L-W15
15/16"
100mm
350g
CLY 350 MS66L-W16
1"
100mm
420g
CLY 350 MS66L-W17
1 1/16"
100mm
420g
CLY 350 MS66L-W18
1 1/8"
100mm
425g
CLY 350 MS66L-W20
1 1/4"
100mm
515g
MS66L
MS66L
Imperial Sizes
CLYDESDALE
Powering the Future

Metric Sizes
MS67
Part No.
Size
Length
Weight
CLY 350 MS67-06
6mm
92mm
100g
CLY 350 MS67-08
8mm
92mm
100g
CLY 350 MS67-10
10mm
92mm
100g
CLY 350 MS67-11
11mm
92mm
120g
CLY 350 MS67-12
12mm
102mm
160g
CLY 350 MS67-14
14mm
102mm
160g
CLY 350 MS67-17
17mm
102mm
180g
CLY 350 MS67-19
19mm
102mm
220g
Part No.
Size
Length
Weight
CLY 350 MS67-W04
1/4"
92mm
100g
CLY 350 MS67-W05
5/16"
92mm
100g
CLY 350 MS67-W06
3/8"
92mm
100g
CLY 350 MS67-W07
7/16"
92mm
120g
MS67
Imperial Sizes
CLY 350 MS67-W08
1/2"
102mm
160g
CLY 350 MS67-W09
9/16"
102mm
160g
CLY 350 MS67-W10
5/8"
102mm
180g
CLY 350 MS67-W12
3/4"
102mm
220g
Insulated Adjustable Spanner (Shifter)

Forged from alloy steel and treated by a means of high frequency tempering, this spanner is
of the highest quality available. Please note that the head is not insulated, if insulation of the
head is required see below for extensive range.
Part No.
MS7
Size
Max. Jaw Open
Length
Weight
CLY 350 MS7-115
4"
13mm
115mm
80g
CLY 350 MS7-160
6"
20mm
160mm
170g
CLY 350 MS7-210
8"
27mm
210mm
330g
CLY 350 MS7-260
10"
30mm
260mm
550g
CLY 350 MS7-310
12"
34mm
310mm
830g
CLY 350 MS7-385
15"
44mm
385mm
1290g
Totally Insulated Adjustable Spanner (Shifter) with moving head insulation

of the highest quality available. The jaw opening is controlled by the dial on the side of the
head, this dial is fabricated by PVC which is completely non conductive.
Part No.
MS7S
Size
Max. Jaw Open
Length
CLY 350 MS7S-210
8"
27mm
210mm
Weight
360g
CLY 350 MS7S-260
10"
30mm
260mm
600g
CLY 350 MS7S-310
12"
34mm
310mm
1050g
CLYDESDALE
Powering the Future
Totally Insulated Adjustable Spanner (Shifter) with fixed head insulation

of the highest quality available. The jaw opening is controlled by the dial on the side of the
head, this dial is fabricated by PVC which is completely non conductive.
Part No.
Size
Max. Jaw Open
Length
Weight
CLY 350 MS7SC-210

CLY 350 MS7SC-260
CLY 350 MS7SC-310
8"
10"
12"
27mm
30mm
34mm
210mm
260mm
310mm
370g
615g
1120g
MS7SC
Insulated Single Open Ended (SOE) Spanner

Forged from heat treated chrome vanadium steel these spanners feature some of the
thinnest head dimensions available.
Metric Sizes
Part No.
CLY 350 MS16-05
CLY 350 MS16-05.5
CLY 350 MS16-06
CLY 350 MS16-07
CLY 350 MS16-08
CLY 350 MS16-09
CLY 350 MS16-10
CLY 350 MS16-11
CLY 350 MS16-12
CLY 350 MS16-13
CLY 350 MS16-14
CLY 350 MS16-15
CLY 350 MS16-16
CLY 350 MS16-17
CLY 350 MS16-18
CLY 350 MS16-19
CLY 350 MS16-20
CLY 350 MS16-21
CLY 350 MS16-22
CLY 350 MS16-23
CLY 350 MS16-24
CLY 350 MS16-25
CLY 350 MS16-26
CLY 350 MS16-27
CLY 350 MS16-28
CLY 350 MS16-29
CLY 350 MS16-30
CLY 350 MS16-31
CLY 350 MS16-32
CLY 350 MS16-33
CLY 350 MS16-34
CLY 350 MS16-35
CLY 350 MS16-36
CLY 350 MS16-37
CLY 350 MS16-38
Size
5mm
5.5mm
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
21mm
22mm
23mm
24mm
25mm
26mm
27mm
28mm
29mm
30mm
31mm
32mm
33mm
34mm
35mm
36mm
37mm
38mm
Length
95mm
100mm
105mm
107mm
110mm
115mm
120mm
125mm
130mm
135mm
140mm
145mm
150mm
155mm
160mm
167mm
172mm
177mm
182mm
190mm
200mm
210mm
220mm
225mm
230mm
235mm
240mm
245mm
250mm
255mm
260mm
265mm
270mm
275mm
280mm
Weight
20g
20g
25g
30g
30g
35g
40g
45g
50g
60g
75g
80g
100g
110g
125g
130g
160g
170g
190g
200g
220g
260g
270g
290g
300g
360g
365g
370g
380g
410g
420g
450g
580g
650g
650g
MS16
CLYDESDALE
Powering the Future
Imperial Sizes / Insulated Single Open Ended (SOE) Spanner
MS16
Part No.
CLY 350 MS16-W04
CLY 350 MS16-W05
CLY 350 MS16-W06
CLY 350 MS16-W07
CLY 350 MS16-W08
CLY 350 MS16-W09
CLY 350 MS16-W10
CLY 350 MS16-W11
CLY 350 MS16-W12
CLY 350 MS16-W13
CLY 350 MS16-W14
CLY 350 MS16-W15
Size
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Length
85mm
90mm
100mm
100mm
130mm
135mm
155mm
160mm
167mm
172mm
200mm
210mm
Weight
30g
30g
40g
45g
55g
75g
100g
120g
130g
180g
190g
220g
Insulated Single Ended Ring Spanner
Forged from heat treated chrome vanadium steel these spanners feature a cranked head for
easier access and increased torque.
MS21
10
Part No.
CLY 350 MS21-06
CLY 350 MS21-07
CLY 350 MS21-08
CLY 350 MS21-09
CLY 350 MS21-10
CLY 350 MS21-11
CLY 350 MS21-12
CLY 350 MS21-13
CLY 350 MS21-14
CLY 350 MS21-15
CLY 350 MS21-16
CLY 350 MS21-17
CLY 350 MS21-18
CLY 350 MS21-19
CLY 350 MS21-20
CLY 350 MS21-21
CLY 350 MS21-22
CLY 350 MS21-23
CLY 350 MS21-24
CLY 350 MS21-25
CLY 350 MS21-26
CLY 350 MS21-27
CLY 350 MS21-28
CLY 350 MS21-29
CLY 350 MS21-30
CLY 350 MS21-32
CLY 350 MS21-36
CLY 350 MS21-41
CLY 350 MS21-46
CLY 350 MS21-50
Size
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
21mm
22mm
23mm
24mm
25mm
26mm
27mm
28mm
29mm
30mm
31mm
36mm
41mm
46mm
50mm
Length
135mm
138mm
146mm
150mm
161mm
163mm
179mm
185mm
198mm
203mm
208mm
218mm
228mm
243mm
248mm
257mm
262mm
270mm
280mm
282mm
285mm
290mm
295mm
300mm
302mm
310mm
360mm
385mm
445mm
460mm
Weight
50g
60g
75g
80g
90g
95g
100g
120g
165g
170g
190g
200g
230g
250g
300g
330g
340g
360g
420g
450g
470g
490g
510g
550g
580g
590g
950g
1000g
1100g
1200g
CLYDESDALE
Powering the Future
Imperial Sizes / Insulated Single Ended Ring Spanner

Part No.
Size
Length
CLY 350 MS21-W04
1/4"
152mm
CLY 350 MS21-W05
5/16"
158mm
CLY 350 MS21-W06
3/8"
163mm
CLY 350 MS21-W07
7/16"
172mm
CLY 350 MS21-W08
1/2"
188mm
CLY 350 MS21-W09
9/16"
198mm
CLY 350 MS21-W10
5/8"
208mm
CLY 350 MS21-W11
11/16"
218mm
CLY 350 MS21-W12
3/4"
228mm
CLY 350 MS21-W13
13/16"
248mm
CLY 350 MS21-W14
7/8"
262mm
CLY 350 MS21-W15
15/16"
270mm
CLY 350 MS21-W16
1"
282mm
CLY 350 MS21-W17
1 1/16"
285mm
CLY 350 MS21-W18
1 1/8"
290mm
CLY 350 MS21-W19
1 3/16"
300mm
CLY 350 MS21-W20
1 1/4"
302mm
CLY 350 MS21-W21
1 15/16"
306mm
CLY 350 MS21-W24
1 1/2"
360mm
Weight
50g
75g
85g
95g
125g
165g
190g
215g
250g
315g
340g
390g
450g
490g
430g
580g
585g
600g
700g
MS21
Insulated Nut Spinner

The blade is forged from heat treated chrome vanadium steel these spinners feature 6 points.
Specially designed for screwing and unscrewing the most inaccessible nuts, these spinners
are fitted with the same handle / grip as our range of screwdrivers.
Metric Sizes
Part No.
CLY 350 IS36-04
CLY 350 IS36-05
CLY 350 IS36-06
CLY 350 IS36-07
CLY 350 IS36-08
CLY 350 IS36-09
CLY 350 IS36-10
CLY 350 IS36-11
CLY 350 IS36-12
CLY 350 IS36-13
CLY 350 IS36-14
CLY 350 IS36-17
Size
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
17mm
Blade Length
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
Handle Length
105mm
105mm
105mm
105mm
117mm
117mm
117mm
117mm
117mm
128mm
128mm
128mm
Weight
80g
94g
106g
144g
170g
192g
196g
214g
216g
254g
282g
292g
Imperial Sizes
Part No.
CLY 350 IS36-W03
CLY 350 IS36-W04
CLY 350 IS36-W05
CLY 350 IS36-W06
CLY 350 IS36-W07
CLY 350 IS36-W08
CLY 350 IS36-W09
CLY 350 IS36-W10
Size
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
Blade Length
130mm
130mm
130mm
130mm
130mm
130mm
130mm
130mm
Handle Length
105mm
105mm
117mm
117mm
117mm
128mm
128mm
128mm
Weight
160g
170g
175g
185g
205g
210g
215g
220g
IS36
11
CLYDESDALE
Powering the Future
Insulated Socket Spanner with T Handle

Forged from heat treated alloy steel these spanners are designed for easier access and
increased torque.
MS19
Metric Sizes
Part No.
CLY 350 MS19-14
CLY 350 MS19-16
CLY 350 MS19-17
CLY 350 MS19-19
CLY 350 MS19-21
CLY 350 MS19-23
Size
14mm
16mm
17mm
19mm
21mm
23mm
Length
700mm
700mm
700mm
700mm
700mm
700mm
Weight
1600g
1650g
1700g
1750g
1800g
1850g
Imperial Sizes
Part No.
CLY 350 MS19-W08
CLY 350 MS19-W09
CLY 350 MS19-W10
CLY 350 MS19-W11
CLY 350 MS19-W12
CLY 350 MS19-W13
CLY 350 MS19-W14
CLY 350 MS19-W15
CLY 350 MS19-W16
CLY 350 MS19-W17
CLY 350 MS19-W18
CLY 350 MS19-W20
Size
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1 1/16"
1 1/8"
1 1/4"
Length
700mm
700mm
700mm
700mm
700mm
700mm
700mm
700mm
700mm
700mm
700mm
700mm
Weight
1450g
1630g
1640g
1700g
1750g
1800g
1850g
1860g
1900g
1920g
1950g
2550g
Insulated Pipe Wrench

Forged from heat treated chrome vanadium steel these 12 sided socket head pipe wrenches
are offset to allow increased access.
Part No.
CLY 350 MS20-06
CLY 350 MS20-07
CLY 350 MS20-08
CLY 350 MS20-10
CLY 350 MS20-11
CLY 350 MS20-12
CLY 350 MS20-13
CLY 350 MS20-14
CLY 350 MS20-15
CLY 350 MS20-16
CLY 350 MS20-17
CLY 350 MS20-18
CLY 350 MS20-19
CLY 350 MS20-21
CLY 350 MS20-22
CLY 350 MS20-23
CLY 350 MS20-24
CLY 350 MS20-25
CLY 350 MS20-26
CLY 350 MS20-27
CLY 350 MS20-28
CLY 350 MS20-29
CLY 350 MS20-30
MS20
12
Size
6mm
7mm
8mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
21mm
22mm
23mm
24mm
25mm
26mm
27mm
28mm
29mm
30mm
Length
82mm
90mm
94mm
118mm
130mm
135mm
150mm
160mm
166mm
172mm
189mm
196mm
208mm
233mm
240mm
260mm
265mm
280mm
290mm
300mm
310mm
320mm
327mm
Weight
30g
35g
50g
90g
95g
130g
160g
170g
220g
230g
280g
320g
370g
510g
660g
690g
710g
780g
810g
1000g
1050g
1150g
1280g
CLYDESDALE
Powering the Future
Insulated Allen Keys

The blades of the entire range of allen keys are forged from chrome vanadium steel which
has undergone a high frequency heat treatment in order to achieve a hardness of between
160 and 180kg/mm2. The quality of this steel allows a reduction in the thickness of the
resulting key, meaning that after the insulation process the Clydesdale / Sibille range of keys
is comparable in thickness to other non insulated keys of the same usable size. The
tightening torques achieved by Clydesdale / Sibille keys are greater by approx. 60% than
those specified by the nut and bolt industries by their standards worldwide.
MS23TS
Insulated Allen Key - T Handle

Metric Sizes
Part No.
CLY 350 MS23TS-03
CLY 350 MS23TS-04
CLY 350 MS23TS-05
CLY 350 MS23TS-06
CLY 350 MS23TS-07
CLY 350 MS23TS-08
CLY 350 MS23TS-09
CLY 350 MS23TS-10
CLY 350 MS23TS-11
Size
3mm
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
Length
172mm
172mm
172mm
178mm
178mm
178mm
178mm
178mm
178mm
Weight
90g
95g
100g
105g
110g
140g
180g
210g
230g
Imperial Sizes
Part No.
CLY 350 MS23TS-W02
CLY 350 MS23TS-W03
CLY 350 MS23TS-W04
CLY 350 MS23TS-W05
CLY 350 MS23TS-W06
CLY 350 MS23TS-W07
CLY 350 MS23TS-W08
Size
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
Length
175mm
175mm
175mm
178mm
178mm
178mm
180mm
Weight
90g
100g
108g
140g
226g
230g
300g
Insulated Allen Key Standard Series

Metric Sizes
Part No.
CLY 350 MS23-03
CLY 350 MS23-04
CLY 350 MS23-05
CLY 350 MS23-06
CLY 350 MS23-07
CLY 350 MS23-08
CLY 350 MS23-09
CLY 350 MS23-10
CLY 350 MS23-11
Size
3mm
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
Length
123mm
124mm
125mm
125mm
126mm
126mm
127mm
128mm
128mm
Weight
20g
30g
50g
70g
85g
110g
140g
190g
190g
Imperial Sizes
Part No.
CLY 350 MS23-W02
CLY 350 MS23-W03
CLY 350 MS23-W04
CLY 350 MS23-W05
CLY 350 MS23-W06
CLY 350 MS23-W07
Size
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
Length
123mm
124mm
125mm
126mm
127mm
128mm
Weight
20g
30g
70g
110g
155g
190g
MS23
13
CLYDESDALE
Powering the Future
Insulated Allen Key Screwdriver Handle
IS64
Metric Sizes
Part No.
CLY 350 IS64-02.5
CLY 350 IS64-03
CLY 350 IS64-04
CLY 350 IS64-05
CLY 350 IS64-06
CLY 350 IS64-07
CLY 350 IS64-08
Size
2.5mm
3mm
4mm
5mm
6mm
7mm
8mm
Length
87mm
87mm
95mm
95mm
105mm
117mm
117mm
Weight
42g
44g
78g
80g
124g
148g
212g
Imperial Sizes
Part No.
CLY 350 IS64-W03
CLY 350 IS64-W04
CLY 350 IS64-W05
CLY 350 IS64-W06
Size
3/16"
1/4"
5/16"
3/8"
Length
95mm
117mm
117mm
127mm
Weight
78g
124g
148g
212g
Insulated Screwdrivers
In compliance with the many different types of electrical work, Sibille has produced a
multitude of sizes of screwdriver, with the aim of satisfying almost every specific need. Each
screwdriver has gone through a rigorous series of research, development, design and test
procedures to ensure that the tool not only performs the required task well but so that it
performs it time and time again for the many years of its expected life.
One of the key advantages of this range of Insulated Screwdrivers is that the diameter
(including insulation) of the blade is the same as that of the screw head. This has been
achieved by recessing the blade length so that there is no requirement of the user to peel
back the insulation as is required by other inferior brands. The handle is designed so as to
give a positive tight grip even when wearing gloves, also allowing a high torque generation.
All Clydesdale / Sibille Insulated Screwdrivers are manufactured from the highest quality
materials and then undergo a high frequency heat treatment to ensure a hardness of
between 160 and 180kg/mm. The advantage of the constant diameter insulated blade is that
the screwdriver may be inserted anywhere without damaging the insulation, thus preventing
any risk to the user.
Insulated Screwdriver Slothead
IS18
14
Part No.
CLY 350 IS18-02
CLY 350 IS18-03
CLY 350 IS18-04
CLY 350 IS18-05.5
CLY 350 IS18-06.5
CLY 350 IS18-08
CLY 350 IS18-08-2
CLY 350 IS18-10
CLY 350 IS18-10-2
CLY 350 IS18-12
CLY 350 IS18B-06.5
Blade
Angle
Width
2mm
3mm
4mm
5.5mm
6.5mm
8mm
8mm
10mm
10mm
12mm
6.5mm
Blade
Thickness
0.36mm
0.44mm
0.71mm
0.91mm
1.08mm
1.08mm
1.08mm
1.42mm
1.42mm
1.79mm
1.08mm
Length
70mm
100mm
120mm
150mm
150mm
150mm
200mm
150mm
250mm
200mm
40mm
Handle
Length
75mm
87mm
95mm
95mm
105mm
117mm
117mm
127mm
127mm
127mm
50mm
Weight
16g
30g
52g
72g
92g
142g
166g
216g
282g
318g
36g
CLYDESDALE
Powering the Future
Insulated Screwdriver Offset Blade Slothead

These screwdrivers provide a handy aid for very difficult access screws, provided in variants
where the blade angle is in line with the length of the blade and against the length of the
blade, the handle is moulded like a standard allen key to allow even greater access to
recessed cabinets.
Part No.
CLY 350 MS37LL-05
CLY 350 MS37LL-06
CLY 350 MS37LL-08
CLY 350 MS37LL-10
CLY 350 MS37LT-05
CLY 350 MS37LT-06
CLY 350 MS37LT-08
CLY 350 MS37LT-10
Blade
Angle
With
With
With
With
Against
Against
Against
Against
Width
5mm
6mm
8mm
10mm
5mm
6mm
8mm
10mm
Blade
Thickness
0.91mm
1.01mm
1.21mm
1.42mm
0.91mm
1.01mm
1.21mm
1.42mm
Length
23mm
28mm
33mm
42mm
23mm
28mm
33mm
42mm
Handle
Length
153mm
100mm
135mm
150mm
150mm
100mm
130mm
150mm
MS7LL
Weight
40g
25g
45g
70g
40g
25g
45g
70g
Insulated Magnetic Screwdriver with detachable tips

Supplied as a standard set with 4 of the most commonly required tips (slothead 5.5 &
6.5mm, cross head 4.5 & 6mm), this tool is made from chrome vanadium steel and simply
has been magnetised to allow the holding of screws for areas of extremely limited access.
For other tip sizes please contact Clydesdale.
Part No.
CLY 350 TM18
Length
245mm
Head
16mm
TM18
Weight
120g
Insulated Screwdriver Pozidrive

Part No.
CLY 350 IP18-0
CLY 350 IP18-1
CLY 350 IP18-2
CLY 350 IP18-3
CLY 350 IP18-4
CLY 350 IP18B-1
CLY 350 IP18B-2
Pozi No.
Width
Blade
Thickness
Length
Handle
Length
Weight
0
1
2
3
4
1
2
4mm
5mm
6mm
8mm
10mm
5mm
6mm
0.71mm
0.81mm
1.01mm
1.08mm
1.42mm
0.81mm
1.01mm
150mm
100mm
125mm
150mm
200mm
40mm
40mm
95mm
95mm
105mm
117mm
127mm
50mm
50mm
55g
60g
82g
146g
256g
34g
34g
Blade
Thickness
0.71mm
0.81mm
1.01mm
1.08mm
1.42mm
Length
150mm
100mm
125mm
150mm
200mm
Handle
Length
95mm
95mm
105mm
117mm
127mm
Weight
55g
60g
82g
146g
256g
IP18
IC18
Insulated Screwdriver Philips

Part No.
CLY 350 IC18-0
CLY 350 IC18-1
CLY 350 IC18-2
CLY 350 IC18-3
CLY 350 IC18-4
Phil No.
0
1
2
3
4
Width
4mm
5mm
6mm
8mm
10mm
TC4
Insulated Screwdriver Countersunk
Part No.
CLY 350 TC4-1
CLY 350 TC4-2
CLY 350 TC4-3
CS No.
1
2
3
Width
2.5mm
3mm
3.5mm
Blade
Thickness
0.38mm
0.48mm
0.59mm
Length
120mm
120mm
100mm
Handle
Length
120mm
120mm
120mm
Weight
90g
90g
90g
15
CLYDESDALE
Powering the Future
Insulated Knives
All of the insulation used on our range of Insulated Knives is moulded in one piece, thus
avoiding possible air gaps or other potential hazards. All blades used are of 70K steel, giving
extreme strength and long lasting sharpness. All knives have been designed with the end
user in mind, the knives are well balanced which allows effortless cutting, also safety is key,
hence the addition of the finger stops. The blade insulation is locked by 6 fixing points to
ensure that both the blade and the insulation stay in place.
All Knives are supplied in a protective storage sheath (as pictured).
N.B. Sharpening is recommended using Sharpener A02
IS77
Part No.
CLY 350 IS77
CLY 350 IS78
CLY 350 IS79
IS79
MS22J
Blade Length
64mm
64mm
62mm
Blade Thickness
6mm
6mm
6mm
Blade Type
Straight & curved tip
Straight & curved tip
Curved
Total Length
180mm
175mm
160mm
Insulated Hacksaw
Each hacksaw is supplied complete with a blade, which is easily replaceable. The standard
hacksaw frame is an injection moulded unit giving one of the most ergonomically designed
hacksaws available. Another feature of the hacksaw is the inclusion of a blade tension lever
and the possibility of offsetting the blade for side cutting. The Junior hacksaw is of the dipped
insulation type.
IS22
Part No.
CLY 350 MS22J
CLY 350 IS22
Type
Junior
Standard
Length
263mm
450mm
Blade Length
145mm
297 or 304mm
Spare Blade Ref.

CLY 351 L22J
CLY 351 L10
Sharpening Stone
Used from the sharpening of any blade, this sharpening stone comes complete with a
protective plastic handle.
AO2
Part No.
CLY 350 A02
Length
255mm
Weight
220g
Insulated Scissors
Available in 2 versions, either with the upper parts of the blades insulated or plain. These
scissors have been designed with special handle opening so as to be used comfortably with
gloves. They are ambi-dextrous, and the blades are constructed from stainless steel. They are
suitable for wire cutting.
MS2E
Part No.
CLY 350 MS2
CLY 350 MS2E
Type
Plain Blade
Ins. Blade
Length
132mm
135mm
Weight
80g
85g
Insulated Cable Cutter
MS2
Forged from nickel chromium steel the blades on these cable cutters are replaceable. Its anti
crossing design avoids cable crushing and deformation. The incredible gearing allows much
harder materials to be cut than would be expected from such a lightweight range of cable
cutters.
Part No.
CLY 350 MS61-160
CLY 350 MS61-330
CLY 350 MS61-630
MS61
16
Max. Jaw Open

5.5mm
12mm
14mm
Length
160mm
330mm
630mm
Weight
290g
970g
2550g
Spare Blade Ref.
CLY 351 MS61M

CLY 351 MS61C
CLYDESDALE
Powering the Future
Insulated Bolt Cutter

Forged from steel with a very high mechanical strength the blades of this bolt cutter are
double heat treated to give even higher cutting strength.
Part No.
CLY 350 MS29D
Length
465mm
Length
18"
Weight
1700g
MS29D
Spare Blade Ref.

CLY 351 MS29DM
Insulated Ratchet Cable Cutter

Manufactured from a treated forged steel blade with a hardness rated at 50 HRC, the blade
can be released at any point during the cutting process. This cutter should only be used to
cut either Copper or Aluminium conductors and will not cut steel, ACSR or hard drawn
Copper.
Part No.
CLY 350 MS76S
Length
270mm
Length
10"
Weight
730g
Spare
Moving Blade
CLY 351 MS76NM
Spare
Fixed Blade
CLY 351 MS76MF
MS76S
Insulated Ratchet Cable Cutter Slim Design

Design to be used in areas where access is limited these ratchet cutters feature a chromium
tipped forged steel blade. The blade can be released at any point during the cutting process.
This cutter should only be used to cut either Copper or Aluminium conductors and will not
cut steel, ACSR or hard drawn Copper.
Part No.
CLY 350 MS46
Length
330mm
Length
13"
Weight
1100g
Spare
Moving Blade
CLY 351 MS46M
MS46
Spare
Fixed Blade
CLY 351 MS46F
Insulated Cable Cutting Pliers

The shape of the nose of the blade makes these pliers the tool of choice for professionals.
Its small size allows use in very confined areas, and its pawl lock allows the blade to
protected whilst not in use. The blades are individually heat treated to give a hardness of
HRC 56. Suitable for Cu and Al only.
Part No.
CLY 350 MS45-195
CLY 350 MS45-230
Max. Jaw
Opening
15mm
20mm
Length
195mm
230mm
MS45
Weight
430g
500g
Insulated Cable Cutting Plier Telephone Cable

Specially designed for the cutting of the telephone cables, hence double section shaping.
Part No.
CLY 350 MS30S
Max. Jaw
Opening
14mm
Length
160mm
MS30S
Weight
200g
Insulated Flush Cutting Pliers

Again specifically designed for the cutting of telephone cables the truncated nose gives a
completely flush finish.
Part No.
CLY 350 MS5S
Length
150mm
Weight
100g
MS5S
17
CLYDESDALE
Powering the Future
Insulated Profiling Shear Pliers

Used to precision cut sheet steel along an exact outline.
Part No.
CLY 350 MS62-225
CLY 350 MS62-275
MS62
Length
225mm
275mm
Weight
430g
660g
Capacity
1mm
1.2mm
Insulated End Cutting Pliers

These tools are forged from chrome vanadium steel with a high carbon content, and are
individually heat treated for added strength.
MS31
Part No.
CLY 350 MS6-135
CLY 350 MS6-170
CLY 350 MS6-210
Length
135mm
170mm
210mm
Length
5"
6.5"
8"
Jaw Gap
7mm
8mm
10mm
Max.
Jaw Opening
19mm
23mm
27mm
Weight
210g
290g
410g
Insulated End Cutting Pliers Extended Reach

These tools are forged from chrome vanadium steel with a high carbon content, and are
individually heat treated for added strength.
Part No.
CLY 350 MS31-170
CLY 350 MS31-185
Length
170mm
185mm
Length
6.5"
7"
Jaw Gap
13.5mm
14.5mm
Max.
Jaw Opening
30mm
32mm
Weight
270g
350g
Insulated Diagonal Cutting Plier
Manufactured from chrome vanadium steel with a high carbon content, these pliers are
individually induction heat treated.
MS60
Part No.
CLY 350 MS60-145
CLY 350 MS5-150
CLY 350 MS60-168
CLY 350 MS5-175
CLY 350 MS60-185
CLY 350 MS5-195
MS60E
Length
145mm
150mm
168mm
175mm
185mm
195mm
Length
5.5"
5.5"
6.5"
6.5"
7"
7.5"
Weight
200g
210g
260g
300g
350g
400g
Test Material
160kg/mm2
200kg/mm2
160kg/mm2
200kg/mm2
160kg/mm2
200kg/mm2
Capacity
1.6mm
1.4mm
1.6mm
1.6mm
1.6mm
1.8mm
Fully Insulated Diagonal Cutting Plier

The same as the MS60 tool but with fully Insulated blades, the insulation is achieved during
a one dip process.
Part No.
CLY 350 MS60E-168
Length
168mm
Length
6.5"
Weight
260g
Test Material
160kg/mm2
Capacity
1.6mm
Insulated Offset Diagonal Cutting Pliers
MS24
individually induction heat treated. The head is angled at 35.
Part No.
CLY 350 MS24-165
18
Length
165mm
Length
6.5"
Weight
230g
CLYDESDALE
Powering the Future
Insulated Universal / Combination Pliers

Part No.
CLY 350 MS4-145
CLY 350 MS4-165
CLY 350 MS4-185
CLY 350 MS4-210
CLY 350 MS4-220
Length
145mm
165mm
185mm
210mm
220mm
Length
5.5"
6.5"
7"
8"
9"
Weight
190g
250g
340g
490g
450g
Test Material
200kg/mm2
200kg/mm2
200kg/mm2
200kg/mm2
200kg/mm2
Capacity
1.4mm
1.6mm
1.8mm
2.0mm
2.0mm
Fully Insulated Universal / Combination Pliers

The same as the MS4 tool but with fully Insulated blades, the insulation is achieved during a
one dip process.
Part No.
CLY 350 MS4E-185
Length
185mm
Length
7"
Weight
340g
Test Material
200kg/mm2
Capacity
1.8mm
MS4E
Insulated Flat Nosed Pliers

Part No.
CLY 350 MS11-150
CLY 350 MS11-170S
CLY 350 MS11-170L
CLY 350 MS11-205
Length
1501.1mm
1701.1mm
1701.1mm
2051.1mm
Length
5.5"
6.5"
6.5"
8"
Nose Style
Short
Short
Long
Long
Nose Length
30mm
39mm
50mm
70mm
Weight
150g
170g
170g
260g
Fully Insulated Flat Nosed Pliers

a one dip process.
Part No.
CLY 350 MS11E-170
Length
170mm
Length
6.5"
Nose Style
n/a
Nose Length
45mm
Weight
180g
MS11E
19
CLYDESDALE
Powering the Future
Insulated Rounded Nose Pliers

Part No.
Length Length
CLY 350 MS10-170 170mm
6.5"
CLY 350 MS10-205 205mm
8"
CLY 350 MS13-165 165mm
6.5"
CLY 350 MS13-205 205mm
8"
CLY 350 MS15-170 170mm
6.5"
Nose
Nose
Test
Capacity
Style
Length Material
2
Straight
50
160kg/mm
1.0mm
Half Round
Straight
70
160kg/mm2 1.6mm
Half Round
Bent 45
46
160kg/mm2 1.0mm
Half Round
Bent 45
67
160kg/mm2 1.6mm
Half Round
Straight
51
n/a
n/a
Full Round
Weight
180g
240g
180g
230g
170g
Fully Insulated Rounded Nose Pliers
MS13E
a one dip process.
Part No.
Length Length
CLY 350 MS13E-170 170mm
6.5"
Nose
Nose
Test
Capacity
Style
Length Material
2
Bent 45
46
160kg/mm
1.0mm
Half Round
Weight
180g
Insulated Slip Joint / Scotch Gas Pliers

MS8
Forged from the highest quality chrome vanadium steel, this tool is used for any task involving
the twisting of another object.
Part No.
CLY 350 MS8-205
CLY 350 MS8-250
CLY 350 MS8-310
CLY 350 MS26-250
CLY 350 MS27-250
CLY 350 MS32-360
MS26
Length
205mm
250mm
310mm
250mm
250mm
360mm
Length
8"
10"
12"
10"
10"
14.5"
Nose
Max.
Style Jaw Opening
Tapered
30
Tapered
40
Tapered
55
Straight
45
Curved
45
Curved
75
Locking
Positions
6
6
6
5
5-Double rack
7
Weight
230g
400g
670g
490g
440g
1010g
MS32
20
CLYDESDALE
Powering the Future
Insulated Cable Stripping Pliers

A simple to use, automatically adjustable tool which enables the user to access even the most
inaccessible places. The cutting edge is replaceable. To use simply position the wire to be stripped
between the cutting edges, press the pliers together and turn, ensure to only use sufficient force and
not to over grip.
Part No.
CLY 350 MS43-10
Length
155mm
CSA Range
0.5 to 10mm2
Weight
210g
MS43-10
Insulated Axe
Manufactured from the highest quality materials this axe is insulated to allow cutting of trees, bushes
etc in close proximity to LV power lines.
Part No.
CLY 350 MS104
Length
380mm
Length
15"
Weight
1,200g
MS104
Universal Composite Pliers

Containing absolutely no metal parts, this tool represents the next generation of Insulated Hand Tools
Non Conductive Hand Tools. Totally non-corroding and due to its composite material is approx. 2/3 the
weight of a traditional universal pliers.
Part No.
CLY 350 MC4
Length
200mm
Length
8"
Weight
150g
MC4
21
ure
ure
Powering the Future
PPE / Arc Flash Protection

Powering the Future
Powering the Future
re
re
Powering the Future
IMPORTANT SAFETY INFORMATION

Arc Protection
P
o w eClothing
r i Requirements
ng the Future
Powering the Future
Factors Affecting the Extent & Seriousness of Worker Injury when Exposed
to Arc Flash
Whenever possible, always de-energise circuits before working on or

around them.
1. Electric arc intensity

Fault current
System voltage
Electrode gap
Number of phases involved
Open arc configuration or enclosure
2. Electric arc duration
3. Distance of the worker from the electric arc
4. Type and fit of clothing worn
5. Age and health factors
OSHA CFR 1910.269 The employer shall ensure that each employee who is
exposed to the hazards of flames or electric arcs does not wear clothing that, when
exposed to flames or electric arcs, could increase the extent of injury that would be
sustained by the employee. (I)(6)(iii)
Clothing made from acetate, nylon, polyester and rayon either pure or blended
should not be worn when working in hazardous environments. Clothing made from
100% cotton or wool must be determined acceptable for the conditions the worker
will be exposed to. Clothing made from flame-resistant materials, that meet current
ASTM F1506, is acceptable.
ASTM F1506 details the specifications of a textile to be used by an electrical
Clydesdale FR Fabrics
worker as a means of electrical arc protection. A garment must include a label,

which states the following information: Tracking I.D. Code, Meets ASTM F1506,
Manufacturers name, Care Instructions & Fibre Content, Size, and Arc Rating
ATPV or EBT.
Clydesdale uses Westex Indura Ultra Soft
exclusively. Indura Ultra Soft blend of

88% cotton and 12% high tenacity nylon substantially increase the fabrics
abrasion resistance helping the garment last over 50% longer than 100% cotton
garments. Plus the new softer feel further enhances the breathable all-weather
comfort of cotton. The treatment process for Indura flame resistant fabrics forms a
long chain flame retardant polymer impregnated into the core of each cotton fibre.
Guaranteed flame resistant for the life of the garment. An excellent value equation.
ASTM F2178 is the test method used to measure arc rated products intended to
protect the face of workers exposed to electrical arcs.
To evaluate FR clothing materials in order to measure the heat transferred through

the fabric, two values are calculated: arc-thermal performance value (ATPV) and
heat attenuation factor (HAF).
ATPV is the minimum energy causing the predicted onset of second-degree burns.
HAF is the percentage of total energy of the arc that the fabric prevents from
passing through.
NOMEX
is a man made fibre resistant to heat, flame and chemicals. NOMEX and
KEVLAR are registered trademarks of E.I. du Pont de Nemours and Company.
Effects of Electrical Shock

Even relatively low voltages can be fatal. For example, electrical shocks produced from
common 50 Hz ac power passing from hand to foot for a duration of one second can
have the following effects:
Heavier or layers of FR fabrics give higher ATP values.

Always Perform a Hazard Assessment
The NFPA 70E Standard for Electrical Safety Requirements for Employee Workplaces
requires employers to perform an Electrical Arc Hazard Assessment. Each situation is
unique and needs to be evaluated on its own merits. ASTM F1959 details the
standardised test that must be used to determine the thermal protective value of
textiles in an electric arc application.
Clothing selected for a particular application shall have an arc protective rating of (EBT
or APTV) higher than the potential hazard to prevent the onset of 2nd degree burns.
Above right are factors affecting potential energy exposures based on the Duke Heat
Flux Calculator on our site (www.clydesdale.ltd.uk/calculator) to compute potential
thermal exposure.
Current
Effects
1-3 Milliamps
Tingling Sensation
3+ Milliamps
Shock (pain)
10+ Milliamps
Muscular Contractions (cant let go)
30+ Milliamps
Respiratory Paralysis (may be fatal)
60+ Milliamps
Ventricular Fibrillation (usually fatal)
4+ Amps
Heart Paralysis (fatal)
5+ Amps
Tissue Burning (fatal, vital organs destroyed)
NFPA 70E 2000 Edition

Table 3-3.9.3 Protective Clothing Characteristics Typical Protective Clothing Systems
Clydesdale Clothing
Colour Code
Hazardous Risk
Category
Clothing Description
(Number of clothing layers
given in brackets)
Total Weight
oz. / yd2
Minimum Arc Thermal

Performance Exposure Value
(ATPV)* or Breakopen Threshold
Energy (EBT)* Rating of PPE cal / cm2
Untreated cotton
(1) 4.5 - 7
FR shirt & FR Trousers
(1) 4.5 - 8
Cotton underwear plus FR

shirt and FR trousers (2)
9 - 12
Royal Blue
Cotton underwear plus FR shirt and

FR trousers plus FR coverall (3)
16 - 20
25
Grey
Cotton underwear plus FR shirt and

FR trousers plus double layer
switching jacket and trousers (4)
24 - 30
40
Blue
*ATPV is defined in the ASTM F1959 standard arc test method for flame resistant (FR) fabrics as the incident energy that would just cause the onset
of a second degree burn. EBT is the average of the five highest incident energy exposure values below the Stoll curve where the fabric does not exhibit
breakopen. EBT is reported when ATPV cannot be measured due to FR fabric breakopen.
the Future
Powering the F
Trust the No.1

Clydesdale is the leading specialist
in overhead
Pow
e r i line
n and
g cable
t hinstallation
e F uequipment
t u rforethe
Electricity and Telecommunication industries.
Expertise
For many years Clydesdale has been supporting the Electricity and Telecommunication
markets in the UK and Ireland. If you have a job that requires a bespoke solution, utilise our
expertise, talk to Clydesdale.
If you have questions or require further information please contact our Customer Services
Department on +44 (0)1234 855855 who will be pleased to answer your request.
the Future
Contents
Clydesdale PRO-WEAR Flash Jackets
Safety Glasses
Clydesdale PRO-HOOD Arc Flash Protection Hood
Replacement Arc Flash Protection Lenses, Brackets and Helmets
Clydesdale PRO-WEAR Arc Flash Protection Bib Overalls & Coveralls
Kit Bag
Arc Flash Protection Kits
Clydesdale Insulating Gloves
Clydesdale Leather Protector Gloves
Glove Inflator
Roll Blankets
Arc Suppression Blanket
Blanket Pegs
Insulated Rescue Hook
Static Discharge Stick
Switchboard Matting
Powering the F
ering the Future
CLY 574 020
ering the Future
Powering
Clydesdale PRO-WEAR Flash Jackets

Dualostage
cal/cm
P
w front
e rclosure
i n with
g plastic
t h zip
e andFFRuVelcro
t ustorm
r eflap on 31-100 P
o jacket
wering
2
designs.
8 cal/cm to 100 cal/cm protection

Indura Ultra Soft material Excellent breathability & cotton comfort
All Clydesdale PRO-WEAR sewn with Nomex thread
32" long and available in sizes S, M, L, XL, 2XL and 3XL
Other sizes available by special order
Jackets designed to interface with PRO-HOOD
Meets current ASTM F1506 and NFPA 70E standards
2
Part No.
CLY 574 075
CLY 574 008
8 cal/cm2, 7oz./yd2 material, expansion back for added comfort,

FR Velcro front closure, Nomex wristlets, navy blue
CLY 574 011
11 cal/cm2, 9oz./yd2 material, expansion back for added comfort,

FR Velcro front closure, Nomex wristlets, navy blue
CLY 574 020
20 cal/cm2, 13oz./yd2 material, expansion back for added

comfort, FR Velcro front closure, Nomex wristlets, navy blue
CLY 574 031
31 cal/cm2, 2 layer (9oz./yd2 & 7oz./yd2) material, expansion

back for added comfort, dual stage front closure with plastic zip
and FR Velcro storm flap, Nomex wristlets, royal blue
CLY 574 040

and FR Velcro storm flap, Nomex wristlets, grey
CLY 574 055

CLY 574 075
75 cal/cm2, 3 layer (7oz./yd2 & 2-13oz./yd2) material, expansion

CLY 574 100
100 cal/cm2, 4 layer (2-7oz./yd2 & 2-13oz./yd2) material,

expansion back for added comfort, dual stage front closure with
plastic zip and FR Velcro storm flap, Nomex wristlets, grey
CLY 574 031
Dual stage front closure with plastic

zip and FR Velcro storm flap on
31-100 cal/cm2 jacket designs.
Description
Note: Add suffix S for small, M for medium etc.

Warning: Arc Flash Clothing protects from thermal effects of arc flash only.
Safety Glasses
CE marked, meets current EN166 standard

Anti-fog, anti-scratch, anti-static
99.9% UV protection
CLY 530 T565BC
Part No.
CLY 530 T565BC
Description
Clear lens, black frame
CLY 530 T565BS
Smoked lens, black frame
CLY 530 T565BA
Amber lens, black frame
the Future
Powering the F
Clydesdale PRO-HOOD Arc Flash Protection Hood
owering the Future

t h e F 8ucal/cm
t utor100e cal/cmPprotection
2

All Clydesdale PRO-HOOD sewn with Nomex thread
6" x 16" (152 x 406mm) viewing area
Wide, arc rated, anti-fog amber lens
Meets current ASTM F2178 and NFPA 70E standards and flammability requirements of
Powering the F
CLY 571 020
ASTM F1506
Universal hard hat bracket included
One size fits all
Part No.
Description
CLY 571 008
8 cal/cm2 protection,
single layer of 7oz./yd2 material, navy blue
CLY 571 011
CLY 571 020
CLY 571 031
2 layer (9oz./yd2 & 7oz./yd2) material, royal blue
CLY 571 040
2 layer (9oz./yd2 & 13oz./yd2) material, grey
CLY 571 055
2 layer (13oz./yd2 & 13oz./yd2) material, grey
CLY 571 075
3 layer (7oz./yd2 & 2-13oz./yd2) material, grey
CLY 571 100

4 layer (2-7oz./yd2 & 2-13oz./yd2) material, grey
CLY 571 040
CLY 571 031
CLY 540 SA29R03
Replacement Arc Flash Protection Lenses, Brackets and Helmets
11 cal/cm to 100 cal/cm protection

1.5mm thickness
6" x 16" (152 x 406mm) viewing area on replacement PRO-HOOD shield
Amber tint
Use with FR clothing
Works with Clydesdale PRO-HOOD
2
Part No.
CLY 540 SA29R03
Description
ANSI Type I, front brim with ratchet 4-point suspension
CLY 579 4000V
Replacement amber lens with Velcro attachment

for 11 cal/cm2 to 40 cal/cm2 Clydesdale PRO-HOOD
CLY 579 10000
Replacement face shield for 55 cal/cm2

and higher Clydesdale PRO-HOOD
CLY 579 001
Universal dielectric hard hat bracket to

interface with front brim hard hats
CLY 579 4000V
CLY 579 10000
CLY 579 001
ering the Future
CLY 573 011
ering the Future
Powering
Clydesdale PRO-WEAR Arc Flash Protection Bib Overalls & Coveralls
P
w eto 100
r ical/cm
n g protection
the Future
8ocal/cm
2
Powering

All Clydesdale PRO-WEAR sewn with Nomex thread
Bib front for added protection
Integrated heavy duty braces
Adjustable Velcro waist straps
Easy-on boot access
Meets current ASTM F1506 and NFPA 70E standards
Sizes S, M, L, XL, 2XL and 3XL available
Other sizes available by special order
Part No.
CLY 573 031
Description
CLY 573 011
11 cal/cm2, 9oz./yd2 material, relax cut for greater mobility

and heavy duty braces, navy blue
CLY 573 020
20 cal/cm2, 13oz./yd2 material, relax cut for greater mobility

and heavy duty braces, navy blue
CLY 573 031
31 cal/cm2, 2 layer (9oz./yd2 & 7oz./yd2) material,

relax cut for greater mobility and heavy duty braces, royal blue
CLY 573 040

relax cut for greater mobility and heavy duty braces, grey
CLY 573 055

CLY 573 075
75 cal/cm2, 3 layer (7oz./yd2 & 2-13oz./yd2) material,

CLY 573 100
100 cal/cm2, 4 layer (2-7oz./yd2 & 2-13oz./yd2) material,

CLY 572 008
8 cal/cm2, COVERALLS 7oz./yd2 material, full cut with set in

sleeves, front flame retardant closure, expansion back,
and 2-ply Nomex wristlets, navy blue
CLY 572 011

sleeves, front flame retardant closure, expansion back,
CLY 572 020

sleeves front flame retardant closure, expansion back,
CLY 573 040
CLY 572 011
Note: Add suffix S for small, M for medium, etc.

Kit Bag
Part No.
CLY 421 010
Description
Large Kit bag for storing Clydesdale PRO-WEAR
Arc Flash Clothing, gloves and other accessories
CLY 421 010
the Future
Powering the F
Arc Flash Protection Kits
t h e FKitsuwith
tu
re
Coveralls
Powering the Future
Part No.
cal/cm2 Rating
Glove Class
CLY 575
008
CLY 575
011
CLY 575
020
CLY 575
020
011
Glove Size
Garment Size
08, 09,
10 or 11
S = 1, M = 2,
L = 3, XL = 4,
2XL = 5 or
3XL = 6
09
Powering the F
CLY 575 011 0093
Example
CLY 575
CLY 575 011 0094 is an arc flash protection kit with a rating of 11 cal/cm2 containing Black
11" Rubber Insulating Gloves Class 0 size 9, Leather Protector Gloves 10" size 9, Orange
Hard Hat SA29R03, T565 BC Safety Glasses, PRO-WEAR Coveralls size XL , PRO-HOOD
Arc Flash Protection Hood, Glove Storage Bag all supplied in Arc Flash Kit Bag.
Kits with Bib Overalls & Jackets
Part No.
cal/cm2 Rating
Glove Class
CLY 576
011
CLY 576
020
CLY 576
020
CLY 576
031
CLY 576
031
CLY 576
040
CLY 576
055
CLY 576
075
CLY 576
100
040
Glove Size
Garment Size
08,
09,
10
or
11
S = 1,
M = 2,
L = 3,
XL = 4,
2XL = 5
or
3XL = 6
09
CLY 576 020 0103
Example
CLY 576
CLY 576 040 2094 is an arc flash protection kit with a rating of 40 cal/cm2 containing Black
14" Rubber Insulating Gloves Class 2 size 9, Leather Protector Gloves 12" size 9, Orange
Hard Hat SA29R03, T565 BC Safety Glasses, PRO-WEAR Flash Protection Bib Overalls
size XL, PRO-WEAR Flash Jacket size XL, PRO-HOOD Arc Flash Protection Hood, Glove
Storage Bag all supplied in Arc Flash Kit Bag.
Size Selector Chart
Chest
Waist
Inside Leg
Size
Size Code
34-36"
28-30"
28"
38-40"
32-34"
29"
42-44"
36-38"
30"
46-48"
40-42"
30"
XL
50-52"
44-46"
30"
2XL
54-56"
48-50"
30"
3XL
CLY 576 100 2104
ering the Future
Powering
Clydesdale Insulating Gloves
ering the Future
Clydesdale
in sizes
P
o w insulating
e r i ngloves
g aret available
he F
u t8-11.
u rProper
e fit is importantPtoominimise
wering
chafing and fatigue. To determine glove size, measure the circumference around the palm (in
inches). Allow for additional room if fabric glove liners are to be worn, especially with thermal
liners.
CLY 560 1410
CLY 552 1410
CLY 550 1409
Available in a variety of colours, material types and voltage classes Clydesdale insulating
gloves are extremely flexible and make working with small parts easy. All Clydesdale
Insulating Gloves meet or exceed EN 60903 and ASTM D120 standards
Part Number
Voltage Class
Length
Material Type
Colour
CLY 5600 11**
00 (500V working)
11"
I Latex
Orange
CLY 550 11**
0 (1000V working)
11"
I Natural Rubber
Black
CLY 550 14**
0 (1000V working)
14"
I Natural Rubber
Red / Yellow
CLY 560 14**
0 (1000V working)
14"
I Latex
Orange
CLY 570 16**
0 (1000V working)
16"
II EPDM
Blue
CLY 570 16**BO
0 (1000V working)
16"
II EPDM
Blue / Orange
CLY 551 14**
1 (7500V working)
14"
I Natural Rubber
Black
CLY 551 16**
1 (7500V working)
16"
I Natural Rubber
Black / Red
CLY 561 16"*
1 (7500V working)
16"
I Latex
Orange
CLY 552 14**
2 (17500V working)
14"
I Natural Rubber
Black
CLY 552 16**
2 (17500V working)
16"
I Natural Rubber
Yellow / Black
CLY 553 16**
3 (26000V working)
16"
I Natural Rubber
Yellow / Black
CLY 553 18**
3 (26000V working)
18"
I Natural Rubber
Yellow / Black
CLY 554 18**
4 (36000V working)
18"
I Natural Rubber
Yellow / Black
** Insert suffix for sizing, 08 for size 8, 10 for size 10 etc.

Note: Two Colour gloves, inside colour is first, i.e. Red / Yellow denotes a glove with an inner
colour of red and an outer colour of yellow.
Other configurations of class, length and material type are available. Please enquire for
further details.
Clydesdale Leather Protector Gloves
Leather protector gloves should always be worn over Insulating Gloves to provide necessary
mechanical protection against cuts, abrasions and punctures. Clydesdale leather protector
gloves are manufactured from cowhide or goatskin. Goatskin is softer and therefore more
flexible whilst cowhide is stronger and more economically priced.
Measure the
circumference around
the palm.
As laid down within the specifications of the EN and ASTM standards it is essential to ensure
the correct distance between the top of the protector glove cuff and the top end of the bead
of the insulating glove. The clearance table opposite details the applicable gap per class of
insulating glove.
Warning: Never use leather protector gloves on their own for protection against electric
shock as serious injury or death will result, always use the correctly specified insulating
gloves.
the Future
Powering the F
Part No.
CLY 555 07451 **
Material
P Goatskin
owe
CLY 555 156-4-**
Cowhide
12"
CLY 555 156-6-**
Cowhide
14"
CLY 555 ILP10 **

CLY 555 ILP3S **
Cowhide
Cowhide
10"
12"
the Future
rin
Glove Class
00
0
1
2
3
4
Length
g 13"t h
Description
FBuckle
uvisibility
ttieuand
r high
e
cuff
4" Salcor
Rubber Cuff
6" Salcor
Rubber Cuff
Elasticated cuff
Leather cuff palmside, vinyl reverse
Powering the F
Distance
1/2" / 13mm
1/2" / 13mm
1" / 26mm
2" / 51mm
3" / 76mm
4" / 102mm
CLY 555 07451 10
CLY 550 1109

CLY 555 ILP1009
Glove Bags
Part No.
CLY 420 GB112
CLY 420 GB114
CLY 420 GB116
CLY 420 GB118
Glove Length
in. (mm)
11(280)
14 (356)
16 (406)
18 (457)
Dimensions
in. (mm)
9" x 14" (229 x 356)
9" x 16" (229 x 406)
9" x 18" (229 x 457)
9" x 20" (229 x 508)
Weight
lbs. (kgs)
1 (.5)
1 (.5)
1.2 (.6)
1.5 (.7)
CLY 420 GB112
Glove Inflator
Electrical insulating gloves must be inspected before each use. Inspection is simplified by
using a portable glove inflator such as the G-99. The G-99 is a simple, easy to use, portable
glove inflator. The G-99 provides a quality means of inspecting gloves in the field. The glove
is secured to the inflator using a nylon strap, fastened with Velcro, or a rubber O ring.
Inflation is accomplished by pumping the bellows of the inflator.
Part No.
G-99
G-99B
G-99R
G-99S
G-99V
Description
Glove Inflator Kit
Replacement Bag
Replacement O Ring
Replacement Strap
Replacement Check Valve
Weight
Ibs (kgs)
2 (.91)
CLY 559 G-99
ering the Future
Powering
Roll Blankets
ering the Future

CLY 971 R1330
Clydesdale
P
o w has
e gone
r i tongreat
g lengths
t h eto protect
F uworkers
t u rfrome low voltage electrical
P ohazards
wering
by now offering insulating blanket material on a roll. Clydesdales insulating Roll Blankets,
made from a high strength, fabric-reinforced Type II rubber, allow workers to custom-cut
blankets to fit each application at the job site. This minimises the number of different low
voltage blanket sizes and shapes that would otherwise need to be carried from job to job.
All classes of Roll Blankets are easily cut with scissors, and are flexible to -40C. Highly
puncture and tear resistant, each class of blanket is also flame (self-extinguishing), oil, and
ozone resistant. Each comes in a convenient 36" wide roll, 30 feet in length in unique colours
making it easy to identify and highly visible in the work area.
Clear PVC Roll Blankets
CLY 971 R1330PVC
Clydesdales Roll Blanket line includes a Class 1 (7500V) clear PVC material that permits
complete visibility, yet provides the necessary insulating properties meeting ASTM F1742
standards.
Part No.
Description
Max. Use
Dimensions ft. (m)
CLY 971 R0330
Class 0 Yellow
1000 V ac
3' x 30' (.9 x 9 )
CLY 971 R1330
Class 1 Yellow / Orange
7500 V ac
3' x 30' (.9 x 9 )
Class 1 Clear PVC
7500 V ac
3' x 30' (.9 x 9 )
CLY 971 R1330PVC

Arc Suppression Blanket
The Arc Suppression Blanket is used as a barrier for protection from the explosive and
incendiary effects of electrical arcs and flashes. These hazardous electrical discharges can
be caused by faults in cables, cable splices joints and at transformer terminals, or they may
be generated by the operation of switchgear, circuit breakers and lightning arrestors. The
blanket can be used for worker protection in underground vaults, switchyards and other
locations where electrical equipment poses a risk of exposure to explosive electrical
discharges.
Caution: Because of the unpredictability of electrical discharges, the Arc Suppression
Blanket may not totally contain arcs and flashes, but only reduce or limit explosive and incendiary
effects. In such cases injuries may still occur, even when the blanket is properly used.
CLY 973 4860
Part No.
CLY 973 4860C
Dimension in. (mm)

48 x 60 (1219 x 1524)
Description
with Canister
CLY 973 4896C
48 x 96 (1219 x 2438)
with Canister
CLY 973 4860
48 x 60 (1219 x 1524)
Blanket Only
CLY 973 4896
48 x 96 (1219 x 2438)
Blanket Only
Blanket Pegs
Blanket Pegs can be effectively used to hold insulating blankets in place. Springs are used
for tension while extra holes in the body of the peg are used to grip conductors and prevent
line hose from sliding. Blanket pegs are made of fibreglass reinforced nylon and have
moulded rubber boots to increase slip resistance.
CLY 559 21
Part No.
CLY 559 21
Description
Nylon Peg
c/w boots
Length
in. (mm)
9.5 (241)
Jaw Opening
in. (mm)
5 (127)
Weight
lbs. (kgs)
.25 (.11)
the Future
Powering the F
Insulated Rescue Hook

to withdraw
P Hook
o wis aneinvaluable
r i n tool
g fort any
h workplace,
e F uused
tu
re
t h e FClydesdales
u t uInsulated
r e Rescue
Powering the F
an injured worker from a hazardous area. Confined spaces, in vaults or just near electrical
cabinets and switchgear are some of the places where this tool is a must. Featuring a foam
filled, fibreglass reinforced handle for superior electrical insulation and a coated heat treated
body hook with an 18" opening, the stick is available in standard lengths of 6 and 8 feet.
Other lengths are available as a special order. Contact us with your requirements.
Part No.
Length ft. (m)
Weight lbs. (kgs)
CLY 250 24401
6 (1.8)
4.5 (2)
CLY 250 24403
8 (2.4)
5.5 (2.5)
CLY 250 24401

The Static Discharge Stick is designed to safely remove the static charge after
de-energizing. This grounding tool is pre-assembled and includes a brass alloy U hook,
4 foot closed cell foam filled tubular fiberglass switch stick made in accordance with ASTM
Standard F711. Six feet of copper grounding cable attached to a Clydesdale 1814 flat jaw
grade 3 bronze serrated clamp with strain relief.
Part No.
CLY 250 20817
Cable Length
ft. (m)
Description
Weight
lbs. (kgs)
6 (1.8)

4' (1.2m) length
8 (3.6)
CLY 250 20817
Switchboard Matting
Switchboard Matting is permanently placed in front of switchgear, motor control centres and
other high voltage apparatus to provide personal protection for workers. Made from high
quality rubber, 1/4" (6.4mm) thick and tested to 20kV to comply with ASTM D178, Class 2
specifications. The corrugated surface acts as a safety tread while reducing the
possibility of metal particles becoming embedded. Switchboard matting is supplied in
25 yard rolls.
Maximum Use: 17000V
CLY 558 M24-2
Part No.
Dimensions in. (mm)
Weight lbs. (kgs) per yd.
CLY 558 M24-2
1/4 x 24 (6 x 610 )
9 (4.1)
CLY 558 M30-2
1/4 x 30 (6 x 762 )
12 (5.4)
CLY 558 M36-2
1/4 x 36 (6 x 914 )
15 (6.8)
CLY 558 M48-2
1/4 x 48 (6 x 1219 )
18 (8.2)
Matting cross section
ering the Future
Powering
Ground Tents & Shelters
ering the Future
All ground
P
o wtents
e rfeature:
ing the Future
Powering
One piece instant set-up in less than 10 seconds

No loose parts
Two screened windows
Tie-down cords through hubs
Ground flaps for weight anchoring
Rubber, non-slip feet
Carry case & tent stakes
A style tents include two screen windows with roll up flaps, a tie down cord through each
of the three hubs, ground flaps, single zippered front door, exterior roof line loops for tie
down, carry case and three tent stakes. The tent also features a vertical slit in the rear wall,
from the hub to ground. Used to allow entry of cable or pipe when jointing, splicing or fusion
welding in the tent, the slit is closed over by means of a Velcro style closure and a hook &
ring assembly.
6506A
Model
6504A
6506A
6508A
6510A
Size
122 x 122cm
178 x 178cm
239 x 239cm
299 x 299cm
Weight
8.2kg
9.1kg
14.1kg
15.4kg
Folded Dimensions
15 x 117cm
15 x 142cm
18 x 168cm
20 x 193cm
6506A
Manhole Tents
The Clydesdale manhole tent works in conjunction with a manhole shield with dual size,
84cm & 91cm diameter, and a manhole guard frame (see below). Model 6000 includes a
bowed metal frame, and fits guards with four vertical post openings. Standard colour is
yellow.
Model
6000 (for use
with Guard 4000)
Dimensions
102 x 102 x 168cm High
Weight
3.6kg
Folded Dimensions
15 x 15 x 96cm
Manhole Shields
Made from lightweight T6 Aluminium, the shield is reversible to fit both standard 68.5cm &
76cm manholes. No clamps or sealing compounds are required a water tight seal is formed
by inflating the tube to 5-10lbs of air.
Model
3336-12A
Dimensions
(84cm or 91cm dia.)
30.5cm high
Weight
11kg
Manhole Guards
These lightweight, rugged steel safety fences provide a rigid and highly visible traffic barrier
around open manholes. They help to eliminate wind hazards when used with a manhole
weather tent. Model 4000 clamps securely to the manhole shield.
Model
4000
10
Dimensions
107cm x 80cm x 82cm
Weight
16kg
Material
Steel
the Future
Powering the F
Trench Tents
o these
w etents
r i offer
n gprotection
t h efromFtheuelements
t u rduring
e
t h e FAvailable
u t inu two
r estandardPsizes,
Powering the F
trenching or boring operations. One piece construction allows for easy set up and take
down and openings on both ends allow easy access. One-piece structure features no
interior obstructions. This tent may be used as a modular set-up by adding as many units
(end-to-end) as required.
Model
6408A
6413A
Dimensions
240 x 490 x 200cm High
390 x 730 x 250cm High
Weight
19.5kg
49.5kg
Folded Dimensions
20 x 20 x 190cm
30.5 x 41 x 254cm
Non-Conductive Work Umbrellas

Heavy duty design for use in maintenance or installation, this work umbrella is ideal for Utility,
Railway and Communication companies. The frame is manufactured from fibreglass and is
therefore non-conductive. This also means that it will not corrode and makes it lightweight
in its use. The main handle is telescopic, extending 2 metres in height, with a 45 locking
tilt facility.
The cover is made from PU Nylon flame retardant material which has been proven in industry
over the last 18 years. Also available is a fabric skirt. When attached to the umbrella this
allows added cover. The skirt can be fitted by zip fasteners along the edges, and can be
secured to the ground by pegs.
The umbrella also features two guy ropes & pegs attached within the top cap to enable
secure fixing in windy conditions.
No loose components to be misplaced
Allows maximum light into work area
Lightweight
Flame retardant
Tear proof
Anti-mildew
Options include:
Logo/company branding
www.clydesdale.ltd.com
11
5 100% MY
CLYDESDALE
Powering the Future
Specialist Cable Installation Tools
Specialist Cable
Installation Tools
CLYDESDALE
Powering the Future
Portable Engine Drill

The most dependable petrol engine drill on the market, its heat-treated gears, heavy-duty
roller and ball bearing systems ensure reliability throughout its lifetime. Though compact and
lightweight (Dimensions 366 x 216 x 258mm), this drill is extremely powerful and can drill
through wood, metal or masonry due to the fact that the chuck speed is easily adjusted via
the throttle lever. The keyless chuck (12") option makes it ideal for use whilst working at the
top of O/H Line poles. The drilling capacity is 250 - 325rpm.
Part No.
CLY 610 100
CLY 610 105
Weight (Dry)
3.9kg
3.8kg
610 105
Option
Keyless Chuck
Keyed Chuck
Carry Box for Portable Engine Drill

This metal bound plywood carrying box is purpose designed for the Engine Drill. Robust in
nature it will give years of protection to the machine.
Part No.
CLY 610 110
Keyless Chuck
Weight
2.5kg
Metal Mixing Bit

610 110
Ideal for mixing of jointers compound, this bit effectively turns the Engine Drill into a large
food mixer. Widely used and now considered by many as indispensable equipment.
Part No.
CLY 610 116
Weight
1.5kg
Timber Auger Bits

Made to the highest levels of quality these auger bits are machine finished to guarantee
smooth holes. Distance marked for convenience, all sizes are stocked for quick despatch.
Generally available in 2 lengths either 330mm or 450mm. Special lengths and sizes are also
available, please ask for details.
Diameter
13mm
14mm
15mm
16mm
17mm
18mm
19mm
21mm
22mm
23mm
24mm
27mm
28mm
32mm
Length 330mm
611 113 L= 285mm
611 114 L=285mm
611 115
611 116
611 117
611 118
611 119
611 121
611 122
611 123
611 124
611 127
610 132
Length 450mm
612 113
612 114
612 115
612 116
612 117
612 118
612 119
612 121
612 122
612 123
612 124
612 127
612 128
612 132
Weight
0.4kg / 0.5kg
0.4kg / 0.5kg
0.4kg / 0.5kg
0.4kg / 0.5kg
0.4kg / 0.5kg
0.4kg / 0.6kg
0.4kg / 0.6kg
0.4kg / 0.6kg
0.5kg / 0.6kg
0.5kg / 0.7kg
0.6kg / 0.7kg
0.6kg / 0.7kg
/ 0.7kg
0.7kg / 0.8kg
610 116
611 119
CLYDESDALE
Powering the Future
MV Voltage Detector TAG 200

Every person involved with overhead power lines needs to know whether the network on
which they are working is LIVE or DEAD. This simple to use Voltage Detector has a number
of unique features, the most novel of all is its in-built self checking device which tests all of
its circuitry, battery connection, as well as the stability of the threshold voltage.
TAG 200
In the event of a live contact the device emits a flashing red light as well as an audible buzzer,
should the contact be dead then a constant green light and no audible signal is given. Should
either the battery voltage diminish or the operator fail to disengage the unit will automatically
turn itself off.
Frequency Range: 50 and 60Hz
Temperature Range: -25C to +40C
Weight: 0.38kg
Length: 188mm
Diameter: 49mm
Standard Kit comprises: 1 x Tester, 1 x Metal Carry Box, 1 x Universal electrode,
1 x Straight electrode
HV Voltage Detector TAG 300
Working on the same principle as the TAG 200 the TAG 300 is designed for use on High
Voltage ranges upto 400kV, the same self check system is employed but the live indication
is given by 3 flashing red lights and the audible buzzer. Should the network be dead and safe
to work then a single solid green light will appear and no buzzer. The same auto cut off is
also standard.
TAG 300

Weight: 0.42kg
Length: 210mm
Diameter: 90mm
Standard Kit comprises: 1 x Tester, 1 x Metal Carry Box, 1 x 60mm Hook electrode,
1 x 120mm Hook, 1 x Straight electrode
VHV Voltage Detector TAG 330
Again using the same principle of design and self checking as the aforementioned TAG 200
and TAG 300, TAG 330 is designed for use on Very High Voltage networks upto 735kV. The
live signal is the same as the TAG 200 by means of a flashing red light and audible buzzer,
dead signal is no buzzer and a constant green light.
TAG 330

Weight: 0.42kg
Length: 210mm
Diameter: 90mm
Standard Kit comprises: 1 x Tester, 1 x Metal Carry Box, 1 x 60mm Hook electrode,
1 x 120mm Hook electrode, 1 x 100mm Straight electrode
Part No.
CLY 300 2-1040
CLY 300 2-1133
CLY 300 3-3366
CLY 300 3-66132
CLY 300 33-240400
CLY 300 33-400735
Type
TAG 200
TAG 200
TAG 300
TAG 300
TAG 330
TAG 300
Voltage Range
10 to 40kV
11 to 33kV
33 to 66kV
66 to 132kV
240 to 400kV
400 to 735kV
Colour
Yellow
Blue
Red
Yellow
Red
Red
Other voltage ranges may well be available, please let us know your requirements.
CLYDESDALE
Powering the Future
TAG 2000 Electronic MV detector up to 80kV AC

The TAG 2000 device is designed to check absence or presence of nominal voltage by direct
contact to the line. It is usually used prior to earthing operation of a three-phase voltage
system. A sharp design, including specific configuration of sensors and digital processor,
provides the required accuracy to face most of field configurations.
The TAG 2000 can be used in all weather and at temperatures between -250C to +550C.
The device features A permanent standby mode, a sound indication beeper, light indication
by 3 red lights, a built in Allcheck test feature, a 40mm Y shape contact probe (straight
hook probe available), a 9V battery 6LR61 supply, a blue polycarbonate shell and weighs
0.270kg.
Each unit must be equipped with an insulating stick with the minimal insulating length in
accordance with the regulation in force. The device can be fitted to any insulating stick with
universal (sunrise) end fitting or to any others by means of adapters.
Description
Detector without accessory
Detector with multi-purpose probe and soft case
Detector with multi-purpose probe and metal case
Votage range to be specified when ordering in the ratio 1:4.
Description
40mm multi-purpose probe (M8)
40mm straight electrode (M8)
40mm Y-shape electrode (M8)
Soft carrying case
Metal carrying box
Reference
TAG 2000
TAG 2000GBS
TAG 2000GBC
TAG 2000
3 Red LEDs
1 Green LED
Reference
47 736
41 811B
42 029
SBH 1000
CT 200
Adapter for grip-all clamp stick

APV type Adapter
Test Button
Beeper
327 39
327 15V
Stick Adapters
Direct
Fitting
Adapters
Reference
327 39
327 39
Code
CR
APV
Sticks
Grip All Clamp Stick
40mm multi-purpose Electrode 47736
Stick End
Fittings
RTTE or TRS/TRE
CLYDESDALE
Powering the Future
Wireless Phasing Device TAG 5000

The first phasing device available without cumbersome leads and wires as such, banishing
all of those disadvantages to history. Easy to use and together with its in built self checking
system which tests all of the internal circuits, battery connections, as well as the stability of
its threshold voltage reliability is almost beyond doubt. Further security features include an
auto stop mechanism for battery protection and an auto switch, which means should the
operator forget to engage the unit, and it comes into contact with a voltage presence the
device will automatically turn itself on.
The device consists of 2 parts, Transmitter and Receiver. The Transmitter (GREY) which also
acts as a voltage detector by means of an audible and visual signal, then measures the phase
angle and transmits this information to the receiver. The Receiver (BLUE) then compares the
information received to that of the phase it is in contact with, if the result is an in phase
situation then the receiver emits an audible and visual signal. Any obstacles such as walls or
doors do not hinder the signal sent by the Transmitter. The HF link is coded at 27MHz and as
such needs no type approval.
TAG 5000
Weight: 0.42kg (x2 parts)

Length: 210mm (x2 parts)
Diameter: 90mm (x2 parts)
Standard Kit comprises: 1 x Transmitter, 1 x Receiver, 1 x Metal Carry Box,
1 x 60mm Hook electrode, 1 x Y electrode
Part No.
CLY 300 5-1133
CLY 300 5-1040
Voltage Range
11 to 33kV
10 to 40kV
Other voltage ranges may well be available, please let us know your requirements.
Accessories for TAG series of detectors and devices
TAG 5000 in use
Description
Metal Carry Box
Metal Carry Box
Metal Carry Box
Straight Electrode 25mm
Hook Electrode 60mm dia
Y Electrode 25mm
Y Electrode 25mm
Y Electrode 40mm
Adapter for Grip All Stick
Adapter for Bowthorpe Rod
To Fit
TAG 200
TAG 200/300
TAG 5000
TAG 200
TAG 200
TAG 300/330
TAG 300/330
TAG 5000
TAG 300/330
TAG 300/330
TAG 200
TAG 5000
TAG 200
TAG 200/300/330/5000
TAG 200/300/330/5000
Part No.
CLY 300 CT200
CLY 300 CT300
CLY 300 CT500
CLY 300 4181 1/A
CLY 300 4181 1/B
CLY 300 AD 100
CLY 300 AC 60
CLY 300 EC500
CLY 300 AC 120
CLY 300 AC 200
CLY 300 4230/A
CLY 300 EV500
CLY 300 42029
CLY 300 327-39
CLY 300 UK3
CLYDESDALE
Powering the Future
TAG 700 Phase Rotation Indicator with in-built LV Voltage and Continuity test
features
TAG 700
A handy and easy to use three-in-one tester. The TAG 700 automatically recognises whether
the supply is AC or DC and measures voltage from 12 to 690V. The continuity test function
provides both audible and visual indication. Patented three-phase rotation detection system.
Powered by 2 x AAA batteries. For further specification please request full data sheet.
Part No.
CLY 300 700
Dimensions
320 x 80 x 40mm
Weight
240g
FC 2000
FC 2000F
The FC 2000 is a vocal cable identifier. It detects de-energised cables for LV, MV and HV
underground and overhead systems. It can be used to identify a particular cable in a trench
or a duct. The FC 2000 can also be used for the identification of the 3 conductors (A, B, C)
of a de-energised and a short circuited three-phase system, in a single operation.
The FC 2000 is linked to the use of the short-circuit/earthing systems in one or two of the
cable ends. There is no need to disconnect the earthing devices or to open the earthing
switches during the operation. This protects against supply feedback and simplifies the
operating procedure.
FC 5000
FC 5000
The FC 5000 is for live cable identification of up to 440V AC. This device provides safe
identification of low voltage live insulated cable before a live connection operation or before
de-energised operation (peak and cut). It also provides core (phase) identification on threephase voltage system. Its specific modulator draws a coded current that can be only detected
between the modulator connection point and the power source (HV / LV transformer).
Detection is available on high-loaded cables.
It can be used to find the right cable among other low or high voltage cables in a trench or
a duct. The device can be used to find the phase to make a connection, and the phase of
any customer. The FC 5000 has a voltage range of 180V 440V and a frequency of 50Hz
and 60Hz.
The modulator comes in a yellow shock-proof all weather case containing modulator and
carrying accessories. The modulator features 3 phases or phase and neutral supply for cable
identification and 3 phases for core (phase) identification. Other features include 800V
protection, weighs 9kg, low current connectors, an average current of 4A, a peak current of
18A at a max of 400V, a 1kHz signal, a transmission of signal on live cables, a built-in
Allcheck to simulate cable and phase identification and a maximum internal temperature
of 72C.
FC 5000D
CLYDESDALE
Powering the Future
Telescopic Sticks
Dielectric resistance 100kV / 30cm after exposure to humidity.
consisting of 2 or 3 parts in fibreglass
locked by push button in folded or unfolded position
upper tube in composite fibreglass on yellow foam, IEC / CEI 60855 quality
lower tube interior silicone-treated against damp
bast fitted with a protected connection for optional extension
The standard TR sticks are supplied with APV end fitting (female 12mm, hexagonal, with
automatic lock) or U end fitting (splined universal end fitting) or EAF end fitting (female 21mm
hexagonal socket with automatic lock), to be specified when ordering.
APV
Use:
Checking absence of voltage
Earthing in MV / LV stations Operating switches
All operations not requiring high mechanical loads
TR2 references
Length (retracted)
TR 245
(TP 34B)
0,85m
25kV
TR 275 (TD 23PE) 1,10m
36kV
TR 276
1,10m
36kV
TR 2225 (TP 34E)
1,75m
72kV
TR 2245 (TP 34F)
2,15m
110kV
TR 2330
2,65m
150kV
TR 3450
(TR 3)
1,65m
63kV
TR 3500
(TR 3)
1,85m
90kV
TR 3600
(TR 3)
2,15m
110kV
Length (extended)
1,5m
63kV
2m
90kV
2m
90kV
3.2m
225kV
4m
300kV
5m
330kV
4.5m
150kV
5m
250kV
6m
300kV
Weight
1,05kg
1,2kg
1,2kg
1,5kg
2,2kg
3kg
3kg
4kg
5kg
Extension ref.
not extendable
1m
RTR 100
not extendable
1,8m
RTR 180
2,15m
RTR 215
2,15m
RTR 215
not extendable
not extendable
not extendable
Cover
HTR 1 950
(TH 5)
HTR 11 100
(TH 6)
HTR 11 100
(TH 6)
HTR 11 850
(TH 7)
HRT 11
(TH 8)
HTR 12 750
HTR 11 850
(TH 7)
HTR 11 850
(TH 8)
H 11
(TH 8)
Salcor Tool Holders

Specifically designed to secure tools, including hotsticks, to trailers, compartments and even
to walls in buildings. The Salcor tool holders are ideal for the storage of fibreglass hotsticks,
they are constructed from Salcor Rubber and as such will not harm the fibreglass in any
way. Supplied in packs of 12.
Part No.
CLY 559 1191
CLY 559 1192
CLY 559 1193
Length
25.4mm
32mm
44mm
Weight
1.4kg
1.6kg
1.7kg
Salcor Tool Holders
CLYDESDALE
Powering the Future
External Rod Clampsticks

External Rod Clampsticks are constructed of closed cell foam-filled tubular fibreglass in
accordance with ASTM standard F711. The hook operating rod, made of solid 9.5mm diameter
fibreglass, is mounted on the exterior of the tool so that it can be easily wiped down prior to use.
Universal Switch Sticks
These foam filled FRP Hotsticks are manufactured using a pultrusion process that results in
a product with extremely high electrical and mechanical qualities.
External Rod Clampstick
Part No.
4007
4008
4009
4010
4011
4012
4013
Length
1.32m
1.62m
1.93m
2.54m
3.15m
3.76m
4.37m
Weight each
1.9kg
2.1kg
2.4kg
2.8kg
3.2kg
3.5kg
4.3kg
Dimensions:
Dia x Length
31.7mm x 1.8m
31.7mm x 2.4m
31.7mm x 3.0m
31.7mm x 3.6m
31.7mm x 4.3m
Weight each
1.5kg
1.8kg
2.2kg
2.5kg
2.8kg
Open Hook
4008
Double Ended Universal

Part No.
4230
4231
4232
4233
4234
4084 Rotary Prong
Universal w/ Rotary Prong or Blade

Part No.
4084 Rotary Prong
4085 Rotary Prong
4086 Rotary Blade
4087 Rotary Blade
Dimensions:
Dia x Length
31.7mm x 1.8m
31.7mm x 2.4m
31.7mm x 1.8m
31.7mm x 2.4m
Weight each
1.7kg
2.0kg
1.7kg
2.0kg
4086 Blade Head
Universal w/ Double Prong

Part No.
4088
4089
Dimensions:
Dia x Length
31.7mm x 1.8m
31.7mm x 2.4m
Weight each
1.7kg
2.0kg
Description
Rotary Blade Head
Double Prong Head
Blade Hanger
Weight each
0.4kg
0.4kg
0.1kg
Head Only
Part No.
4093
4096
4098
4088 Double Prong Head

Double Ended Universal Hotstick
CLYDESDALE
Powering the Future
Key
Universal Fittings
1. 2500 Shotgun Adapter (0.2kg)

2. 4236 Tree / Wire Hook (0.2kg)
3. 9878 Pig Tail Disconnect (0.2kg)
4. 9838 Chuck Blank (0.2kg)
5. 9971 Light Duty Cutout Prong (0.2kg)
6. 9969 Heavy Duty Disconnect Head
(0.3kg)
7. 9979 Prong Disconnect (0.2kg)
8. 4099 Rotary Prong Tie Head (0.27kg)
9. 4100 Rotary Blade Tie Head (0.3kg)
10
11
12
10. 9839 Pointed Disconnect (0.2kg)

11. 4101 Double Prong Tie Head (0.22kg)
12. 4102 Fixed Blade Tie Head (0.22kg)
CLYDESDALE
Powering the Future
Universal Fittings
Key
1. 4106 Tubular Line Cleaner (0.6kg)
2. 4111 V Line Cleaner (0.6kg)
3. 4113 Replacement Brushes x 10 (1.4kg)
4. 4106 Curved Blade Skinning Knife (0.2kg)
5. 4103 Pruning Saw Handle (0.22kg)
6. 4104 Pruning Saw (0.22kg)
7. 4181 Hack Saw, w/ replacement blades
(0.2kg)
8. 9834 Clamp Stick Head (0.6kg)
9. 4105 Tree Pruner on 3.6m Fibreglass

Pole, Complete with 7.62m of Line
(0.2kg)
10. UST Universal System Tool Blanket Pin
(0.45kg)
11. 4114 Flex Head Socket Wrench (0.5kg)
12. 4115 Ratchet Wrench 12sq. Drive
(0.22kg)
9
7
10
11
12
CLYDESDALE
Powering the Future
Compression Tools
A wide variety of manufacturers exist in this segment of our industry, but Clydesdale has long
been established as being the supplier of one of the best. The same manufacturer as for our
extensive range of hydraulic tools, now surely the industry standard, this range of
compression tools is made with the same high quality material and high levels of skill.
Manual / Hydraulic Operation Compression Tool
Suitable for the installation of a wide range of compression fittings for overhead line
construction. This tool feature fixed D3 and BG dies, so that this operation is continuously
available. Supplied complete with its own carry bag this tool readily accepts MD-6 (W) dies.
Dies are sold separately.
Part No.
CLY 936 MD6
CLY 936 Y-35
MD6
Y-35
Type.
Manual
Hydraulic
Output
4500kg
5400kg
Weight
2.8kg
3.7kg
Length
630mm
425mm
Battery Operated Compression Tool

Again used in conjunction with MD-6 W dies or equivalent, sold separately. The beauty of
battery power is there is no muscle power required, hence there is virtually no risk of muscle
injury. Giving an output of some 5 metric tonnes, this tool is lightweight and easy to use.
Manufactured from the very highest quality components this is probably the bench mark tool
by which other battery operated compression tools will be judged. As a matter of policy
Clydesdale goes to many lengths to see if products can be improved. In this case we have
had several of the parts Nickel plated to give a longer life expectancy as well as having the
head insulated with the same material as is used on our range of Insulated Hand Tools, this
material has been extensively tested to ESI 26-3.
As well as the high specification of the tool itself, the accessories are also high quality, with
the new charger coming complete with a discharge button so that memory effect can at last
be a thing of the past. As well as this the new super smart batteries re-charge within 22
minutes, completely. Obviously all spare parts and accessories are available individually,
however, for your convenience Clydesdale has assembled a complete working kit, details
below;
EDW-58I
Part No. CLY 937 EDW-58IB Kit
U-DIE
1 x EDW-561 Batt Op Comp Tool

2 x Super Smart Batteries
1 x Cigar Lighter Charger
1 x Shoulder Strap
1 x Plastic Carry Case
Please Note
A wide range of dies are also available for all types of compression tools, please stipulate tool
and conductor.
Clydesdale is also able to supply compression tools from several other manufacturers if your
company policy does not allow you to choose our variation. Please be assured that all
manufacturers have benefits to their compression tools, Clydesdale are here to help you
make the right decision from the mass of information that is available.
W-DIE
10
CLYDESDALE
Powering the Future
Battery Operated Compression Tool

Used in conjunction with Burndy U dies or equivalent, sold separately. The beauty of battery
power is there is no muscle power required, hence there is virtually no risk of muscle injury.
Giving an output of some 12 metric tonnes, this tool is lightweight and easy to use.
Manufactured from the very highest quality components this is probably the benchmark tool
by which the other battery operated compression tools will be judged. As a matter of policy
Clydesdale goes to many lengths to see if the products can be improved. The head can be
insulated (not shown) with the same material as is used on our range of insulated hand tools,
this material has been extensively tested to ESI 26-3.
As with the W die battery operated tool, the U die tool is also sold as a kit, details of the
standard kit are given below. However, please bear in mind that this service is carried out by
Clydesdale, not the manufacturer, so if you want a different kit, or indeed the component
parts individually please see the details at the foot of this page.
Part No. CLY 937 EC125IA
Kit comprises:
EC-125
1 x EC125I Batt Op Comp Tool

2 x Super Smart Batteries
1 x Cigar Lighter Charger
1 x Shoulder Strap
1 x Plastic Carry Case
Battery Operated Compression Tool Accessories

BA1420X
Batteries 14.4V DC, 2AH

Part No.
CLY 936 BA1420
CLY 936 BA1420X
Description
Standard Battery Pack
Standard Battery Pack
Charge Times
CT2415-D CD1457HB CT1415HB
1 Hour
15 minutes
1 Hour
1 Hour
15 minutes
1 Hour
Dimensions
LxHxW
100 x 137 x 70mm
100 x 137 x 70mm
Weight
730g
730g
Ensure that batteries are fully discharged and re-charged at least every 3 months. Both
batteries have a life expectancy of 600 re-charges, number of cycles per charge is
dependant on nature of use.
Charger Units
Part No.
CLY 936 CT1415-D
CLY 936 CT1417HB
CLY 936 CT1415HB
Description
Cigar Lighter Charger Unit
Super Charger Unit
c/w Discharge Button
Standard Charger Unit
Input Voltage
12 / 24V DC
220 / 240V
LxHxW
200 x 95 x 115mm
200 x 95 x 115mm
Weight
700g
770g
220 / 240V
212 x 95 x 105mm
1.9kg
If the super charger is used properly it is possible to almost eradicate memory loss effect, for
a full explanation please contact Clydesdale. For this to be possible, a routine discharge and
re-charge procedure must be entered into.
CT1415-D
11
CLYDESDALE
Powering the Future
Hydraulic Cutters & Heads

A vast range of conductors, cables, wire ropes and indeed around bars can be cut with the
Clydesdale range of hand held hydraulic cutters. All models shown are of the guillotine
variety, which jam far less frequently than the shear type equivalent.
Of course, the biggest advantage with these tools is that they are ready to cut instantly, there
is no set up time. The head rotates through 180 to allow for the best cutting position, indeed
it is imperative that all cutting can be done at an angle of 90 from the material which you
are cutting.
S-24
The alternative to hand held cutters are cutting heads which are operated remotely using
either a hand or foot pump. The heads can also be operated using any hydraulic pump with
a max oil pressure of 700kg/cm2 (10,000psi). As standard the units come with PT 3/8" highpressure couplers, alternatives available upon request.
Blades can be easily replaced, please find below a comprehensive parts list for all the cutters.
Cutter Selection Chart (Maximum Cutting Capacity)
Round Bar (mm)
Part No.
S-20
S-24
S-32A
S-75
P-85
P-100
P-130
Max.
Output
(tons)
4
7.8
20
2.5
3
7.5
7.5
Length
390mm
426mm
675mm
695mm
65mm
140mm
178mm
Weight
2.8kg
4kg
9.3kg
6.8kg
14kg
19kg
21kg
Handle
Load
18
28
29
16.5
7.2
13.5
15
Soft
Al Bar
16
18
32
Wire Strands (mm)

1x7 Guy
Soft Reinforcing Bare Cu Bare Al Lead Steel Wire
Steel Bar
Bar
Strands Strands ACSR
Strands
16
13
20
20
21
15
20
16
24
24
24
20
25
25
32
32
32
32
23
29
28
46
42
46
42
46
Cable (mm)
Sheath SWA
Cable Cable
18
24
32
75
50
85
50
100
75
130
75
Operating Pump Selection Chart
S-24
12
Pressure Rating
(Kgf/sq.cm)
Oil
(cc/stroke)
Hand Op
2 Speed
Low/0-20
12.26
FP-700S
Foot Op
2 Speed
High/200-700
13S-1
Foot Op
2 Speed
Low/0-20
High/200-700
Part No.
Type
HP-700S
Reservoir
Capacity Weight
Dimensions
LxWxH (mm)
720cc
10.5kg
580x140x160
2.26
1300cc
12kg
720x150x190
10.3
1L
1300cc
11kg
480x150x180
CLYDESDALE
Powering the Future
Bolt Cutters
Made from the highest quality materials, these Bolt Cutters have adjustable blades for easy
use. Lightweight Japanese construction ensures long reliable life.
Part No.
CLY 930 TP-1200
CLY 930 TP-1800
CLY 930 TP-2400
CLY 930 TP-3000
CLY 930 TP-3600
CLY 930 TP-4200
Size (Length)
12"/300mm
18"/450mm
24"/600mm
30"/750mm
36"/900mm
42"/1050mm
Cut
5mm
8mm
10mm
12mm
15mm
18mm
Weight
0.5kg
1.0kg
2.9kg
3.8kg
4.7kg
5.6kg
TP-1200 4200
Rod & Wire Cutters

Clydesdale currently has 4 variations of the Rod & Wire Cutters each with unique features,
ideal for different situations.
The series ME*N is made with hollow aluminium pipe handles which makes them
incredibly lightweight, without impacting on their performance.
The series ME*S has fibreglass handles which again makes them incredibly lightweight
but due to the non-conductivity of fibreglass means that they can be used in live
applications.
The series MI is the smallest type, its compact size allows use in confined space.
The series MSH is the strong cutter in the range, with a little skill and a lot of strength
these cutters can even be used to cut staywire. This cutting ability is due to the fact that
the blades are made from hardened high-speed steel laminated to carbon alloy steel.
Part No.
CLY 930 ME-200N
CLY 930 ME-400N
CLY 930 ME-150S
CLY 930 ME-250S
CLY 930 MI-060
CLY 930 MI-100
CLY 930 MI-200
CLY 930 MSH-65
Type
ME*N
ME*N
ME*S
ME*S
MI
MI
MI
MSH
Length
500mm
700mm
460mm
615mm
310mm
445mm
600mm
585mm
Cut Capacity
Cu/Al 200mm2
Cu/Al 400mm2
Cu/Al 150mm2
Cu/Al 250mm2
Wire Rope 7mm
Wire Rope 10mm
Wire Rope 12mm
Wire Rope 16mm
Weight
0.9kg
1.5kg
0.9kg
1.5kg
0.7kg
1.1kg
1.8kg
2.2kg
ME*N
ME*S
MI
MSH
Note: Not to Scale
13
CLYDESDALE
Powering the Future
Ratchet Cable Cutters
RC-32C
63060
930 K-3
Ratcheting Cable Cutter

With one hand, cleanly cut copper up to 400 MCM, and aluminium and multi-conductor
cables up to 600 MCM. The unique ratchet action holds the cable tight and allows rapid,
straight cuts with minimum effort. Hold open spring speeds the cutting action. The quick
release lever opens the blade at any time during operation. Large, finger-formed handles
have limit guards and plastic covering for comfortable, non-slip grip. This strong, light-weight
tool can be locked in a closed position for pouch carrying. This product is not designed for
cutting steel or ACSR.
Part No.
Length
CLY 930 63060
Length 255mm
Ratchet Cable Cutters

The third variety of hand held ratchet cable cutters supplied by Clydesdale are by far the
simplest to use. Simply action, no reverse gear on handle, simply pull the cutting blade back,
this can be achieved at any blade position. Designed for the cutting of Copper and Aluminium
cables only with a max. CSA of 500mm2.
Part No.
Length
Max. Cut CSA
Max Cut
Weight
2
CLY 930 K-3
255mm
300mm
34mm
0.9kg
52mm
1.3kg
CLY 930 K-4
340mm
500mm2
Heavy-Duty Ratcheting Cutter

The ratchet-action design of this cutter provides maximum leverage with minimum effort for
severe-service use in cutting ACSR and AAAC, common guy strand, steel wire rope, steel rod
(C.R.S. soft), and copper or aluminium cable. It features a drop forged, heat-treated,
shear-type blade, plus a 914mm steel handle with heavy vinyl grips for comfort and slip
resistance. The design incorporates a blade to engage the cable or other material being cut,
plus a quick-release mechanism, which allows removal of the cable or rod before completion
of the cut, if desired. Not designed for cutting EHS Guy Strand or reinforcement rod.
The Cutting Capacity of the Heavy-Duty Ratcheting Cutters is 32mm ACSR, AAAC, 11mm
Common Guy Strand, 16mm Steel Wire Rope, 13mm Steel Rod, 35mm Copper or Aluminium.
Part No.
Overall Length
Approx. Weight
CLY 930 63700
914mm
6kg
63700
14
Probably the highest quality ratchet cutters, of their size, currently available, the RCC-32 &
RCC-42 are in use in nearly all of the utilities in the UK, used because of their reliability and
their proven long lifespan their Japanese build quality has been a market leader for several
years now.
Part No.
Length
Weight
Max Cable
CLY 930 RCC-32C
230mm
0.5kg
32mm
CLY 930 RCC-42SC
260mm
1.2kg
42mm
CLYDESDALE
Powering the Future
Holstered Lock Knife

This superb quality precision made lock knife comes complete with its own moulded plastic
holder, which fits all sizes of workbelts and harness straps, and will not release the knife until
the release button is depressed. The 80mm hollow ground blade is made of stainless steel
to avoid corrosion and the holster features a grinding point for re-sharpening the blade. The
ergonomically designed handle increases usability due to its comfortable grip style.
Part No.
Length
Weight
CLY 930 LE-325
234mm
130g (including Holster)
LE-325
Lock Knife
Using the same 80mm hollow ground stainless steel blade as featured on the LE-325, this
knife is positioned in a hardwood handle with brass rivet components. Once opened and
locked in place the knife will not close until the release is depressed.
Part No.
Length
Weight
CLY 930 MDX-01
195mm (Open)
110g
MDX-01
Multi-Purpose Sharpening Tool

A knife sharpener and a lot more. Tungsten-carbide bonded to fine, medium and rough
sharpening surfaces, hardens this steel enough to dress any knife. The chisel point makes
this tool useful for hacking, prying, scraping, splitting, cutting sheet metal or other rough jobs
that would harm a knife. The leather-sheath handle folds out of the way for use as a
sharpener, provides a convenient way to hold the tool when using it as a chisel or other tool.
The leather lanyard holds the tool in sheath and secures it to belt or ring.
Part No. 44150
Overall size: 127 x 22 x 6mm
Compact Pocket Knives
Compact, lightweight knives in three sizes. Stainless steel handles and blades. Rose-wood
handle inserts on both sides. Modified spear-point blades lock open.
Part No.
Blade Length
Length Closed
44032
4.1cm
6.4cm
44033
5.1cm
7.6cm
44034
6.7cm
10.2cm
High Leverage Cable Cutter
This handy, economical tool handles most cable cutting jobs with ease. Special high-leverage
design gives it amazing cutting capability for its size. Cable-gripping, shear-type jaws cut up
to 4/0 aluminium (not ACSR), up to 2/0 soft copper, up to 100 pair, 24 gauge
communications cable. This tool makes clean efficient cuts. It is very compact at only 241mm
long, so can be carried in a tool pouch or holder. It is ideal for working in confined spaces.
The cutter has tough, comfortable, red plastic dipped handles. Not designed for cutting steel
or ACSR.
Part No.
Length
CLY 930 63050
241mm
44150
44032 - 34
63050
15
CLYDESDALE
Powering the Future
Ratchet Podger Spanner RM Series

These Ratchet Podger Spanners, with reversible changeover pawl, make construction
operations easy, even in adverse working conditions. Fully drop forged with heat-treated
tapered podger makes lining up of boltholes easy. When ordering please prefix sizes with
RM for part number.
Ratchet Podger
Spanner
Size
10 x 12mm
10 x 13mm
10 x 14mm
11 x 13mm
12 x 14mm
13 x 17mm
13 x 19mm
17 x 19mm
17 x 21mm
17 x 22mm
19 x 21mm
19 x 22mm
19 x 24mm
21 x 26mm
21 x 27mm
22 x 24mm
22 x 27mm
23 x 26mm
24 x 27mm
24 x 30mm
26 x 32mm
27 x 30mm
30 x 32mm
32 x 35mm
32 x 36mm
Length
235mm
235mm
235mm
235mm
235mm
278mm
278mm
312mm
312mm
312mm
312mm
312mm
358mm
358mm
358mm
358mm
358mm
358mm
358mm
415mm
415mm
415mm
415mm
460mm
460mm
Weight
190g
190g
190g
190g
190g
260g
260g
430g
430g
430g
470g
430g
460g
770g
760g
760g
760g
760g
760g
1100g
1100g
1100g
1140g
1540g
1540g
Metric Nut
Size
Equivalent
M6
RG 3
M6
M8
M6
M8
M8
M10
M8
M12
M10
M10
M12
M10
M14
M10
M12
M14
M12
M12
M16
M14
M14
M18
M16
M16
M18
M16
M20
M18
M20
M20
Grip Size
RG 3
RG 3
RG 3
RG 3
RG 3
RG 3
RG 4
RG 4
RG 4
RG 4
RG 4
RG 4
RG 5
RG 5
RG 5
RG 5
RG 5
RG 5
RG 6
RG 6
RG 6
RG 6
RG 6
RG 6
Please enquire if the size you require is not mentioned.

Rubber Grip
Oil resistant rubber handle specifically supplied to aid grip when used on the Clydesdale
range of Ratchet Podger Spanners. To ensure you choose the correct grip for each Ratchet
Podger Spanner please refer to the Ratchet Podger Spanner specification table above.
Rubber Grip
16
CLYDESDALE
Powering the Future
Extension Sockets
For use on RM or RW series ratchet wrenches.
Part No.
HS 17
HS 19
HS 24
HS 27
HS 30
HS 32
Size
17mm
19mm
24mm
27mm
30mm
32mm
Max. Torque
48kgf/m
57kgf/m
80kgf/m
94kgf/m
107kgf/m
116kgf/m
Weight
50g
90g
150g
200g
260g
300g
Double Ended Ratchet Spanner RW Series

Top quality Chrome Vanadium steel construction makes these spanners an invaluable aid in
all industries.
Size
10 x 11mm
10 x 12mm
12 x 14mm
13 x 17mm
15 x 16mm
17 x 19mm
19 x 21mm
19 x 22mm
21 x 23mm
21 x 26mm
24 x 27mm
24 x 30mm
30 x 32mm
Weight
120g
130g
190g
270g
290g
360g
445g
435g
560g
620g
700g
780g
1050g
Size
M6
M6
M8
M10
M12
M12
M14
M14
M16
M16
M20
Double Ended
Ratchet Spanner
Metric Nut
Equivalent
M12
M14
M18
M20
PRW Quad Spanners

A new addition to the range of Clydesdale ratchet spanners, these handy 4 way ratchet
spanners are small and compact. They feature reversible ratchet actions in four sizes per
spanner.
Size
Part No.
1
2
3
4
Length
Weight
CLY 362 01
5.5
7
6
8
115mm
0.065kg
CLY 362 02
9
11
10
12
140mm
0.115kg
CLY 362 03
8
10
12
13
146mm
0.130kg
CLY 362 04
10
12
13
14
165mm
0.150kg
CLY 362 05
13
15
14
17
190mm
0.220kg
CLY 362 06
13
17
19
21
215mm
0.305kg
CLY 362 07
19
21
22
24
240mm
0.370kg
PRW Spanner
17
CLYDESDALE
Powering the Future
One Hand Wrench

HW-300
Allows the pipe to be gripped with one hand so that you have the other hand free, due to the
fact that no screw adjustment is required for the jaw opening. The slim head makes it ideal
for working in confined spaces. The ratcheting mechanism makes it possible to work on
rusted or seized bolts. High quality cast alloy head.
Part No.
CLY 365 HW-300
CLY 365 HW-350
CLY 365 HW-450
361 0112
Pipe Diameter
11 - 43mm
22 - 49mm
27 - 60mm
Length
335mm
385mm
490mm
Weight
0.85kg
1.01kg
1.93kg
Adjustable Shifting Spanner

With the head angled to 23 this spanner has been designed for maximum usage. Chrome
Vanadium finish extends life of spanner. Overall length is 300mm (12") and the maximum jaw
opening is 34mm.
Heavy Duty Linesmans Pliers

Combines all three features required in a set of pliers by Linesmen. 9" Long, diamond pattern
nose grip, radiused chain grip, extra long cutter blades, nut turning hex and crimping head.
Capable of crimping 2.5 to 6.0mm2. This tool is available insulated to ESI 26-3 (1000V).
364 MA-880
Part No. CLY 364 MA-880
Magnetic Spirit Level

Ingenious tool, that is proving to be an invaluable aid to linesmen all over the country. It simply
grips metal objects (including X-Arms) by means of the two magnetic strips on its base (not
shown). It also features a moveable angle indication vial. Very robust due to its steel
construction. Available in two sizes from stock.
365 ML-300AM
Part No.
CLY 365 ML-300AM
CLY 365 ML-600AM
Length
300mm
600mm
Non-Conductive Tape Measure

There are no metal parts within this tape measure, as it is not insulated it is non-conductive,
this I am sure you realise is a great difference, the tape will not hold a current, therefore can
be used in all sorts of circumstances.
111 001
The tape itself is made from the highest quality FRP material, that will not stretch or tear,
enabling the tape to last for several years of steady use. Proof tested to 20kV this tape is
proving to be an invaluable aid in the utitilies industry the world over.
Standard length of tape is 3.5m.
18
CLYDESDALE
Powering the Future
Pole Turning Arm

The Pole Turning Arm greatly reduces the effort required to turn wood poles to the correct
position. It is both safer and quicker than more traditional methods. Manufactured from high
quality steel the unit is fully adjustable for all pole diameters. Due to a request from one of
the electricity companies the pole Turning Arm now comes in 2 versions, chain or webbing
strap. The webbing strap has been used so as to reduce any damage to the pole caused
during the turning operation.
Pole Turning Arm Link Chain

Pole Turning Arm Webbing Strap
Patent App No. 9714401.8
Part No.
CLY 1007
CLY 1008
Weight
7.5kg
6.5kg
CLY 1007
Length
Closed
Open
1100mm 1400mm
1100mm 1400mm
Cable Bending Tool

Ideal tool to take the backache out of bending cables. Bends the cable to the desired radius
simply and easily. Telescopic handle aids use and storage. Be aware of cables minimum
bending radius before bending process commences.
Part No.
CLY 1005
Weight
5.5kg
CLY 1005
Jointers Cable Stand

Makes the working on cables easier by raising the cable to handier levels. Simply ratchet the
clamps into place to hold the cable firmly, thus allowing the cable to be worked on. Virtually
all sizes of cable can be fitted into the clamps.
Part No. CLY 640 930 1824
640 930 1824
19
CLYDESDALE
Powering the Future
Ground Dog (Anchoring System)

The dog itself is constructed of high quality steel and galvanised for long life. Its unique shape
hugs the ground to give maximum holding power. The ground pins are made of very high
tensile steel giving tremendous strength and can be used for all manor of purposes not only
with the dog. The extractor key makes removal of the ground pins easy.
1001
Part No.
CLY 1001
CLY 1002
CLY 1003
Ground Dog
Ground Pin
Extractor Key
1002
Weight
28kg
2.0kg
2.5kg
SWL
2,000kg
n/a
n/a
1003
Staywire Frame
Allows staywire be stored under tension and handled with complete safety, construction
includes tubular steel frame and ball race hub suspension. Galvanised against corrosion.
Part No.
CLY 1004
Weight
7.5kg
Diameter
850mm
Height
410mm
1004
Pole Bogie
Manufactured from high quality steel, the pole bogie can handle poles with ease, the two
webbing securing chains being adjustable to suit individual pole diameters. The wheels have
ball race suspension.
Part No.
CLY 1009
Weight
30kg
Length
122cm
Width
91cm
Ground Clearance
25cm
Running Earth
Cast Aluminium base with 2 ball raced pulley designed to be put between winch and first pole
during stringing operations. When connected to an earth this device provides extra protection
against back feed or lightening strikes.
Part No.
CLY 1006
Weight
2kg
1006
20
CLYDESDALE
Powering the Future
Phase Rotation Indicator

Robin K8031F is now widely used across the electricity industry because of its easy to use
format and reliability. Provides instant indication of phase sequence on three phase systems
to ensure correct connection. Can also be used to confirm direction of motor rotation prior to
connection of supply.
310 8031F
Part No. CLY 310 8031F
Cable Avoidance Tool and Signal Generator (CAT & Genny)

The Cable Avoidance Tool (CAT) is used to detect the signal generated by the signal generator
(Genny). The Genny is placed at the end of a duct rod and pushed through a duct, then when
the blockage is reached the CAT is used to detect its location and hence valuable time is
saved. Also can be used when the route of a duct is not plotted, simply use the CAT to follow
the route of the Genny plotting as you go.
Part No.
CLY 305 10-01
CLY 305 10-02
305 10-01
Description
Cable Avoidance Tool (CAT)
Signal Generator (Genny)
Digging Equipment
Clydesdale is able to supply most tools necessary for the digging of trenches, pole holes and
other pits. Illustrated here is just a brief array of the variations available. Variations include
fibreglass handles and shafts, as required under certain safety notices.
Part No.
CLY 120 001
CLY 120 002
CLY 120 003
CLY 120 004
CLY 120 005
CLY 120 006
CLY 120 007
CLY 120 008
CLY 120 009
Description
Square Mouth Shovel
Tapered Mouth Shovel
Rounded Mouth Shovel
Trenching Shovel
Cable Layers Shovel
Newcastle Draining Shovel
Trenching Fork
12lb Rammer / Punner
Rabbitting Spade
Handle
Length / Fibreglass
712mm / Yes
712mm / Yes
712mm / Yes
712mm / Yes
712mm / Yes
712mm / Yes
712mm / Yes
1140mm / No
1675mm / No
120 004
Blade
(Depth x Width)
320 x 255mm
320 x 215mm
320 x 267mm
280 x 190mm
280 x 114mm
320 x 267mm
310 x 210mm
n/a
320 x 124mm
120 006
120 008
120 007
Not to scale
21
CLYDESDALE
Powering the Future
Conductor Height Measuring Pole

Made from high quality, light durable fibreglass, these telescopic poles are ideal for the
measuring of conductor heights, or indeed any other overhead object. The dial features a
metric display, which makes allowance for the length of the rod, so you only have to line up
with the top of the object to get your measurement. Base and tops are sealed with a special
agent to ensure the poles are dust and water-resistant.
Tested to 75kV per 30cm for 5 minutes, it is possible to check the heights of conductors even
when they are live. Resistant to hot and cold (Temp range -50C to +150C). Supplied
complete in its own handy nylon carry bag, to aid life expectancy.
111 004
111 007
Part No.
CLY 111 003
CLY 111 004
Length
(Retracted)
1.42m
1.42m
Length
(Max. Extended)
8m
12m
Weight
1.95kg
2.76kg
Digital Surveyors Measuring Wheel

The compact retractable design means that the need for cumbersome wheels is no longer
necessary. The counter is sealed in a waterproof case for its own protection. Range is
0.1m to 1,000m.
Part No.
CLY 111 007
Weight
630g
Digital Electronic Conductor Height Measurer

This device measures the height of conductors from the ground, thus reducing the risk of
electrocution. With accuracy better than 99%, this device can measure the height of upto 3
successive conductors in one operation by pressing just one button. The maximum operating
height is 20m vertically or 46m horizontally.
305 SR600E
The device has an auto shut down which will turn the device off after 3 minutes. Battery life
is in excess of 50,000 operations. (Battery type 1x LR61). Device complete with its own
leather case and 12 month warranty.
Part No.
CLY 305 SR600E
305 01-73/77
Weight
600g
Multimeters
Industry standard Fluke 70 Series III Multimeter supplied complete with a set of fused leads.
This Multimeter does everything you would expect it to do, Voltage (AC/DC), Current (AC/DC)
and resistance. The Fluke 73 and 77 offer exactly the right fit for a wide range of
measurements. They are truly all-round performers. The 73 III is perfectly suited for many
electronic applications and has the classic 70 series design with removable holster. The 77
III has all the features and functions for a wide range of industrial applications packaged in
an ergonomic case with integrated holster. Both models come with the unique lifetime
warranty.
Max.
Max.
Max.
Part No.
Volt AC/DC Curr AC/DC Resistance Dimensions
Weight
CLY 305 01-73
600V
10A
32MW
166x75x28mm
340g
CLY 305 01-77
1000V
10A
32MW
190x89x37mm
365g
22
6 Pantone Orange 021
CLYDESDALE
Powering the Future
Overhead Line Hardware
Overhead
Line Hardware
CLYDESDALE
Powering the Future
Bird Flight Diverter

These diverters really do work, perhaps despite of their unusual appearance, by causing
birds, especially Swans, to veer upwards in flight. Large birds lack the manoeuvrability to
avoid overhead power lines, the Bird Flight Diverter simply makes the line look bigger, so that
it really is giving the bird more opportunity to change direction and hence save its life and
your power line.
The BFD can be fitted from the ground using switching rods using the special adapter shown.
This saves both time and cost, in that there is no need for an outage at any stage. The clamp
itself is deigned to securely grip all conductors up to a diameter of 70mm, so almost all
Overhead lines from LV to EHV can be protected.
Operating Tool
Greatly improved recently, we now use stainless steel rings to attach the roundel, gripper
hands have been added to aid opening of the jaws, as well as many other new features that
have improved this unbeatable nature preserver.
Part No.
CLY KL 70 FASTE
CLY E06 683 301
Descriptions
BFD Operating Tool
Weight
0.2kg
0.4kg
Staywire Markers
Ideal for use on stays that cross public footways or golf courses, both types of Clydesdale
staymarker can be easily fitted and clearly identify the location of stays. This helps to avoid
injury to both employees as well as the public and warns hedge trimmers of the possible
hazard.

Clydesdale
The Clydesdale staymarker consists of a pack of eight markers (2 small yellow, 2 small black,
2 large yellow & 2 large black) that just simply snap over the stay. The advantage of this type
of staymarker is threefold easy to store (both in the vehicle and at the warehouse), easy to
use and its low cost (approx. 1/3 of a traditional staymarker).
The American or more traditional staymarker consists of a single yellow 8 foot length that
snaps over the stay and then is tightened in place by either the means of a cable tie or nut
and bolt assembly.
Part No.
970 000
970 0CPU PV-01H
970 0CPU PV-01T
Descriptions
Clydesdale Staymarker (Pack of 8)
American Staymarker 8' Bolt Type
American Staymarker 8' Tie Type
Line Markers
Used to make an overhead line more visible to aircraft on distribution voltage overhead lines.
The sphere is positioned on the line by the use of a shotgun or grip all stick. Simply attach
the stick to the hook and screw the piercing connector onto the conductor. As with the
Clydesdale Bird Flight Diverter the Line Marker can be installed under live conditions.
Part No.
CLY 212 02-01
CLY 212 02-10
CLY 212 02-11
CLY 212 06-01
CLY 212 06-10
CLY 212 06-11
Colour
Red
White
Red / White
Red
White
Red / White
Diameter
200mm
200mm
200mm
600mm
600mm
600mm
Weight
0.4kg
0.4kg
0.4kg
7.0kg
7.0kg
7.0kg
American
212 02-01
CLYDESDALE
Powering the Future
Powerplate Labelling System

Guaranteed Not to fade for at least 10 years.
Ideal for the labelling of Overhead Line Poles, Switches, Terminals etc. The Clydesdale range
of Powerplate signs comes in 5 sizes H10 (character height 10mm), H25 (25mm), H50
(50mm), H80 (80mm) & H160 (160mm). Made from specially lacquered yellow painted
anodised aluminium these signs are guaranteed not to fade for up to 10 years.
H25, the most popular size, ideal for pole labelling, consists of a punched out character. When
this character is slid into the black painted anodised aluminium baseplate it gives the effect
of a black character on a yellow background.
H10, H50, H80 & H160 are made from the same material but are actually black screen
printed characters onto a yellow surface, these signs are also treated with the special lacquer
giving at least the guaranteed 10 year lifetime.
Characters available are all numbers 0-9, letters A-Z as well as various punctuation symbols
and blanks for spacing. Baseplates are available in 2 lengths 500mm and 1000mm.
The signs can be mounted either vertically or horizontally. Simply by mounting H25
characters in the H10 baseplate the sign will read vertically, the same applies by mounting
the following H50 in H25 baseplate, H80 in H50 baseplate & H160 in H80 baseplate.
The special Combi-Crimp tool provides the perfect accompaniment to the system as it cuts
and seals the baseplate as well as piercing a nail hole in the baseplate so that erection of the
sign is simplicity itself. The Combi-Crimp tool works on all sizes of characters except H160.
Please use part number chart opposite.
Baseplates
As mentioned above the Powerplate sign is positioned into the baseplate. The baseplate is
also manufactured from anodised Aluminium to guarantee a long life. The baseplate can be
used in either a horizontal or vertical plain depending on requirement.
Part No.
CLY 261 010 01
CLY 261 025 01
CLY 261 025 02
CLY 261 025 03
CLY 261 025 04
CLY 261 050 01
CLY 261 050 02
CLY 261 080 01
CLY 261 080 01
Length
330mm
500mm
500mm with Slots
1,000mm
330mm
500mm
500mm
1,000mm
1,000mm
Use
H10 Horizontal
H25 Horizontal
H25 Horizontal
H25 Horizontal
H25 Vertical
H50 Horizontal
H50 Vertical
H80 Horizontal
H80 Horizontal
H25 Starter Kits

The ideal way to get started or indeed to store your equipment, the Powerplate labelling
system can be supplied in a handy easy to use starter kit form. Each kit comprises 25 of
every character 0-9, A-Z as well as ./:-, plus 10 of the 500mm baseplates and a CombiCrimp tool.
263 2500
If the kit contents do not exactly match your requirements, please tell us as special kits can
be made up very easily.
Whilst the H25 starter kit is a standard product kit, product kits are also available for the other
4 sizes of Powerplate labelling system H10, H50, H80 & H160.
CLYDESDALE
Powering the Future
Powerplate Labelling System Table

Character
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
.
BLANK
/
:
-
H10
CLY 260 010 00
CLY 260 010 01
CLY 260 010 02
CLY 260 010 03
CLY 260 010 04
CLY 260 010 05
CLY 260 010 06
CLY 260 010 07
CLY 260 010 08
CLY 260 010 09
CLY 260 010 10
CLY 260 010 11
CLY 260 010 12
CLY 260 010 13
CLY 260 010 14
CLY 260 010 15
CLY 260 010 16
CLY 260 010 17
CLY 260 010 18
CLY 260 010 19
CLY 260 010 20
CLY 260 010 21
CLY 260 010 22
CLY 260 010 23
CLY 260 010 24
CLY 260 010 25
CLY 260 010 26
CLY 260 010 27
CLY 260 010 28
CLY 260 010 29
CLY 260 010 30
CLY 260 010 31
CLY 260 010 32
CLY 260 010 33
CLY 260 010 34
CLY 260 010 35
CLY 260 010 36
CLY 260 010 37
CLY 260 010 38
CLY 260 010 39
CLY 260 010 40
Part No. Guide

H25
H50
CLY 260 025 00
CLY 260 050 00
CLY 260 025 01
CLY 260 050 01
CLY 260 025 02
CLY 260 050 02
CLY 260 025 03
CLY 260 050 03
CLY 260 025 04
CLY 260 050 04
CLY 260 025 05
CLY 260 050 05
CLY 260 025 06
CLY 260 050 06
CLY 260 025 07
CLY 260 050 07
CLY 260 025 08
CLY 260 050 08
CLY 260 025 09
CLY 260 050 09
CLY 260 025 10
CLY 260 050 10
CLY 260 025 11
CLY 260 050 11
CLY 260 025 12
CLY 260 050 12
CLY 260 025 13
CLY 260 050 13
CLY 260 025 14
CLY 260 050 14
CLY 260 025 15
CLY 260 050 15
CLY 260 025 16
CLY 260 050 16
CLY 260 025 17
CLY 260 050 17
CLY 260 025 18
CLY 260 050 18
CLY 260 025 19
CLY 260 050 19
CLY 260 025 20
CLY 260 050 20
CLY 260 025 21
CLY 260 050 21
CLY 260 025 22
CLY 260 050 22
CLY 260 025 23
CLY 260 050 23
CLY 260 025 24
CLY 260 050 24
CLY 260 025 25
CLY 260 050 25
CLY 260 025 26
CLY 260 050 26
CLY 260 025 27
CLY 260 050 27
CLY 260 025 28
CLY 260 050 28
CLY 260 025 29
CLY 260 050 29
CLY 260 025 30
CLY 260 050 30
CLY 260 025 31
CLY 260 050 31
CLY 260 025 32
CLY 260 050 32
CLY 260 025 33
CLY 260 050 33
CLY 260 025 34
CLY 260 050 34
CLY 260 025 35
CLY 260 050 35
CLY 260 025 36
CLY 260 050 36
CLY 260 025 37
CLY 260 050 37
CLY 260 025 38
CLY 260 050 38
CLY 260 025 39
CLY 260 050 39
CLY 260 025 40
CLY 260 050 40
H80
CLY 260 080 00
CLY 260 080 01
CLY 260 080 02
CLY 260 080 03
CLY 260 080 04
CLY 260 080 05
CLY 260 080 06
CLY 260 080 07
CLY 260 080 08
CLY 260 080 09
CLY 260 080 10
CLY 260 080 11
CLY 260 080 12
CLY 260 080 13
CLY 260 080 14
CLY 260 080 15
CLY 260 080 16
CLY 260 080 17
CLY 260 080 18
CLY 260 080 19
CLY 260 080 20
CLY 260 080 21
CLY 260 080 22
CLY 260 080 23
CLY 260 080 24
CLY 260 080 25
CLY 260 080 26
CLY 260 080 27
CLY 260 080 28
CLY 260 080 29
CLY 260 080 30
CLY 260 080 31
CLY 260 080 32
CLY 260 080 33
CLY 260 080 34
CLY 260 080 35
CLY 260 080 36
CLY 260 080 37
CLY 260 080 38
CLY 260 080 39
CLY 260 080 40
H160
CLY 260 160 00
CLY 260 160 01
CLY 260 160 02
CLY 260 160 03
CLY 260 160 04
CLY 260 160 05
CLY 260 160 06
CLY 260 160 07
CLY 260 160 08
CLY 260 160 09
CLY 260 160 10
CLY 260 160 11
CLY 260 160 12
CLY 260 160 13
CLY 260 160 14
CLY 260 160 15
CLY 260 160 16
CLY 260 160 17
CLY 260 160 18
CLY 260 160 19
CLY 260 160 20
CLY 260 160 21
CLY 260 160 22
CLY 260 160 23
CLY 260 160 24
CLY 260 160 25
CLY 260 160 26
CLY 260 160 27
CLY 260 160 28
CLY 260 160 29
CLY 260 160 30
CLY 260 160 31
CLY 260 160 32
CLY 260 160 33
CLY 260 160 34
CLY 260 160 35
CLY 260 160 36
CLY 260 160 37
CLY 260 160 38
CLY 260 160 39
CLY 260 160 40
CLYDESDALE
Powering the Future
Speciality Signs
Due to our experience we have made many variations of the Powerplate sign, from coloured
phase plates (blue, red and yellow) to specific pole decay signs. Examples of some of these
signs are given here, however, if you require something different please contact Clydesdale
and specify your requirements.
Part No.
CLY 262 101
CLY 262 102
CLY 262 103
CLY 262 104
CLY 262 011
CLY 262 012
CLY 262 013
CLY 262 104
CLY 262 014
Description
Blue, Red & Yellow Phase Plate
mounted in Baseplate
Blue Phase Plate
Red Phase Plate
Yellow Phase Plate
Blue Phase Plate with Nail Hole
Red Phase Plate with Nail Hole
Yellow Phase Plate with Nail Hole
Red H50 D mounted in Baseplate
Yellow H50 D with 4 Nail Holes
Suggested Use
Transformer Plate
Transformer Plate
Transformer Plate
Transformer Plate
Phase Plate
Phase Plate
Phase Plate
Decayed Pole Sign
Decayed Pole Sign
Danger Plates
Due to our experience we have made many variations of the Powerplate sign, from coloured
phase plates (blue, red and yellow) to specific pole decay signs. Examples of some of these
signs are given here, however, if you require something different please contact Clydesdale
and specify your requirements.
Part No.
CLY 264 001
CLY 264 002
CLY 264 003
CLY 264 004
Description
Pole Sign Danger of Death /
Do Not Climb
Pole Sign Danger of Death /
Keep Off
Tower Sign Danger of Death /
Do Not Climb
Substation Sign Danger of Death /
Keep Out
Size
240 x 480mm
240 x 480mm
480 x 480mm
480 x 480mm
Danger Plate Installation Clamp

An invaluable clamp used to attach danger signs / notices to towers without the need for
specific holes to be drilled, these revolutionary clamps are guaranteed to stay in place and
are not a temporary but a completely permanent attaching tool. These clamps offer obvious
safety as opposed to the more traditional steel punching devices often used specifically for
this purpose. Sold in packs of 10.
CLYDESDALE
Powering the Future
Woodpecker Scarer
If you live in an area where there is a high concentration of woodpeckers you will no doubt
be aware of the damage that they can cause to overhead line wood poles. This device works
on the woodpeckers inherent fear of large males of the species, originating from Scandinavia
this sign is simply bolted in place and is proven to have worked very successfully in banishing
woodpeckers from its vicinity.
Plastic Bird Protector for Bushings, Jumpers, Insulators and Conductors
SP 31-3
Made from weather and UV resistant plastic these variations of the plastic guard are ideal for
the protection of various parts of the Overhead Line Network. Each set is complete and ready
for installation, supplied with all necessary cable ties. Each type has its own specific benefit,
for further details please do not hesitate to contact Clydesdale.
Part No.
ENS SP 31-3
ENS SP 36-3
ENS SP 38-3
Dimensions
647mm L
Dome 168mm
100mm H
Dome 70mm
Package
Complete Set of 3
Complete Set of 3
Complete Set of 3
Flat Packed
Weight
660g
550g
550g
SP 36-3
Plastic Pole Hat

Used to protect the top wooden poles, normally left un-creosoted by suppliers. Hats are nailed
in place by means of the three hot dip galvanised nails supplied with the hats. Made from
weather and UV resistant plastic
Part No.
ENS SP 18
ENS SP 19
ENS SP 20
Diameter
180mm
220mm
270mm
SP 38-3
Weight
47g
55g
90g
SP 18
Silicon Rubber Insulators

The advantages of Silicon Rubber Insulators against the more traditional porcelain type are
now well known. In short, they are significantly less prone to damage through mishandling or
vandalism whilst having improved electrical properties. Clydesdale is able to supply a wide
range of Silicon Rubber Insulators, illustrated here is just a brief outline of the most common
types. It is possible for us to have units manufactured to your exact requirements, quantity
dependant, so if your specification is not listed below then please let us know.
Flying Section Line Insulators
Distribution Dead End / Suspension Insulators
Transmission Dead End / Suspension Insulators
Extended Length Dead End Insulators
Liner Spacer Insulators
Line Post Insulators
Pin Insulators
Stay Insulators
15 to 46kV
15 to 46kV
69 to 138kV
15 to 351kV
15 to 46kV
15 to 69kV
15 to 46kV
15 to 46kV
CLYDESDALE
Powering the Future
Main Features
Air Break Switch Disconnectors (ABSD)
Modular Design
Fits any X-Arm
3 Types of insulator material Porcelain,
Air Break Switch Disconnectors are a vital part of any overhead line network, providing crucial
points of isolation. Most overhead line networks are designed so that when a fault occurs or
maintenance work needs to be carried out it is relatively simple, by means of a systematic
series of switching operations, to isolate a certain section of overhead line. When this
switching process is carried out it is absolutely imperative that the Air Break Switch
Disconnector is reliable and effective.
Epoxy or Silicon
Telescopic Op Rods
Approx. 5 week lead time
Based on IEC 129
Designed and Manufactured under
ISO 9000
Lightweight
Easy to erect
Widely used throughout Europe
Many Accessories
Assembly instructions included
Clydesdale distributes a range of Air Break Switch Disconnectors manufactured by AB Gevea

of Sweden. In Scandinavia the distribution network is rated slightly differently to that in the
UK, as such the Air Break Switch Disconnectors that are supplied by Clydesdale are rated at
24 and 36kV. Effectively what this means is that if a 24kV Air Break Switch Disconnector is
installed on an 11 or 20kV network then there is inherently more protection being built into
the network.
The Clydesdale range of Air Break Switch Disconnectors is of a lightweight modular design,
the base of this modular design being the phase elements themselves. Onto the phase
elements you can add numerous accessories for the attachment of cables or fusegear. The
possibilities are almost endless, for example, if you are contracted to purchase an Air Break
Switch Disconnector without loadbreaking (interrupter) heads, but you have a specific
location that requires this loadbreaking facility, then simply contact Clydesdale and we will
supply the loadbreaking heads as a bolt on accessory.
Technical Specifications
Rated Voltage
Impulse withstand Voltage phase-earth
Power frequency withstand Voltage
Rated Current
Peak withstand Current
Short time Current 1 sec
Short time Current 3 sec
Breaking capacity mainly active load CO = 0.7
With breaking whip
With Loadbreaking Head
Short circuit-making capacity with main contact
GDS20
24kV
125kV
50kV
630A
50kA
20kA
16kA
GDS36
36kV
170kV
70kV
630A
50kA
20kA
16kA
25A
630A
5kA
16A
400A
5kA
All Clydesdale Air Break Switch Disconnectors have been tested to open / close when
covered with 10mm of ice as is common in Scandinavian winters.
CLYDESDALE
Powering the Future
Air Break Switch Disconnector Insulators

Clydesdale is able to supply its Air Break Switch Disconnectors with a choice of three types
of insulator material Porcelain, Outdoor Epoxy Resin or Silicon Rubber. The Porcelain
Insulators are of low weight design and provide the most traditional look of an Air Break
Switch Disconnector. The next grades of insulators are cychloalifatic epoxy resin, are also of
a low weight design and are less susceptible to damage through mishandling or vandalism.
Finally the highest grade of insulator is of Silicon Rubber which has the lowest weight of the
three grades and also the highest resistance to damage through mishandling or vandalism.
Air Break Switch Disconnector Operating Mechanisms
Clydesdale is obviously able to supply the traditional ground level handle mechanism which
has the built in padlocking capability (padlock not supplied). Alternatively Clydesdale is
able to supply a Hotstick Operating Mechanism. The Hotstick Mechanism is designed to
overcentre towards the open position so if good contact is lost by the operating Hotstick the
Air Break Switch Disconnector will not fall into the closed position.
Part No.
CLY 202 A6941
CLY 202 A7380
CLY 202 A6941-01
CLY 202 A6941-02
Description
Handle Operating Mechanism (Lockable)
Hotstick Operating Mechanism
Handle Operating Mechanism (Lockable) with Interlocking
Wheel Disconnector
Handle Operating Mechanism (Lockable) with Interlocking
Wheel Earth Switch
Air Break Switch Disconnector Loadbreaking (Interrupter) Heads

The Clydesdale Loadbreaking Head is of the dry construction type where a specially
formulated plastic is used to extinguish the arc during the loadbreaking process. The
Clydesdale Loadbreak head can be mounted in either the traditional horizontal or vertical
positions. The Loadbreak head is attached to the phase element by the means of four bolts,
is easily adjusted and can be supplied as a retro fit accessory. Loadbreak Heads are sold as
individual units (1 required per phase).
Part No.
CLY 202 GLBD1
CLY 202 GLBD2
Description
Loadbreak Head 24kV
Loadbreak Head 36kV
Breaking Capacity
630A
400A
CLYDESDALE
Powering the Future
Air Break Switch Disconnector Operating Rods

One unique feature of the Clydesdale Air Break Switch Disconnector is the telescopic
operating rods that are used in conjunction with the ground level handle mechanism. The
advantage of this telescopic operating rod is that the rod extends by upto 2m ensuring that
the Air Break Switch Disconnector is set to operate perfectly. This telescopic rod also avoids
the necessity of cutting the operating rod to length as is required by some competitor rod
sets. In conjunction with the telescopic rod Clydesdale also supplies a fixed length rod (Top
Rod), this clamps to the phase coupling tube which opens / closes the Air Break Switch
Disconnector on the operation of the Handle Operating Mechanism.
Part No.
CLY 202 A7352-1
CLY 202 A7552-2
CLY 202 A7352-3
CLY 202 A7352-4
CLY 202 A7373
CLY 202 A7435
CLY 202 2862032
Description
Top Rod with Fork
Intermediate Rod
Lower Telescoping Rod
Extension Rod with Socket & extra Guide
Hotstick Op Rod Fork both ends
Complete Rod Set with Top & Lower
Complete Rod Set with Top & Lower
Length
3.25m
3.25m
1.7m extending to 3.5m
2.00m
Please note that neither individual rods (except CLY 202 A7352-4) nor complete rod sets are
supplied with any joining piece, please specify joining piece required from the detailed
alternatives below.
Air Break Switch Disconnector Phase Coupling Tubes
Mounted between the phase elements and connected to the operating rod by the axis
coupling the phase coupling tube is a box section rod which turns to open / close the Air
Break Switch Disconnector. For 36kV rated Air Break Switch Disconnector the phase coupling
tube is double lined to ensure sufficient torque strength.
Part No.
CLY 202 A6616-01
CLY 202 A6616-02
CLY 202 A6616-03
CLY 202 A6616-04
CLY 202 A6616-11
CLY 202 A6616-12
CLY 202 A6616-13
CLY 202 A6616-14
Description
Phase Coupling Tube 24kV
Length
1.25m
1.65m
2.00m
2.50m
2.00m
2.50m
3.00m
3.30m
Air Break Switch Disconnector Earth Switches

Predominantly on the 33kV overhead line network it is necessary to add the provision of an
earth switch to the Air Break Switch Disconnector, this is also available from Clydesdale.
CLYDESDALE
Powering the Future
Air Break Switch Disconnector Other Spare Parts

Part No.
CLY 202 A6742
CLY 202 A7550
CLY 202 A6734
CLY 202 A7635
CLY 202 A6743
CLY 202 A7354
CLY 202 A7435SW
CLY 202 A7335
CLY 202 A7460
Description
Silicon Rubber Rod Insulator upto 24kV
Silicon Rubber Rod Insulator upto 36kV
Operating lever / Axis Disconnector Blade
Operating lever / Axis Earth Blades
Guide for Operating Rod
Operating Rod Coupling Socket
Temporary steelwork for H/S Op
Connection Palm / Starplate
Auxiliary Contact Block (1xNO / 1xNC)
Pack Size
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
A6742
A6734
Air Break Switch Disconnector Complete Units
A6743
Obviously the vast array of possibilities make it almost impossible to list every possible
variation of Air Break Switch Disconnector within these pages, however, listed below are the
most common units supplied by Clydesdale, if the exact specification required is not listed
please refer to Clydesdale for further assistance.
Line Switches with Silicon Rubber Insulators
Description
Voltage
Interrupting
Capacity
CLY 200 A7435S
Line Loadbreak Switch 630A

Ground Level Handle Operation
24kV
630A at 24kV
Phase Elements fixed connections on

both sides Includes Rods, Rod Guides and
Rod Insulator, Mounting X-Arm
for underslung installation
CLY 200 A7435HS

Hotstick Operation
24kV
630A at 24kV

both sides Includes Rod & Rod Guide,
Mounting X-Arm for underslung installation
CLY 200 A7522-1S
Line Disconnector 630A

24kV
25A at 24kV
Phase Elements fixed connections on both

sides Includes X-Arm clamps for
mounting on standard C-channels
Suitable for mast head or underslung
installation, also includes Rods, Rod Guides
and Rod Insulator
Part No.
Specification
CLYDESDALE
Powering the Future
Line Switches with Porcelain Insulators

Description
Voltage
Interrupting
Capacity
CLY 200 A7611

24kV
25A at 24kV

underslung installation also includes Rods,
Rod Guides and Rod Insulator
CLY 200 A7612

24kV
630A at 24kV

underslung installation also includes Rods,
Rod Guides and Rod Insulator
CLY 200 A7522-1

24kV
25A at 24kV

both sides Includes X-Arm clamps for
mounting on standard C-channels
Suitable for mast head or underslung
installation also includes Rods, Rod Guides
and Rod Insulator
CLY 201 A7411

Mast Head Installation
36kV
16A at 36kV

mounting on 2 x U-channels Phase
Distance Max. 1450mm Max. Installation
Height above ground 10m also includes
Rods, Rod Guides and Rod Insulator
CLY 201 A7411L

36kV
400A at 36kV

CLY 201 A7411E

Earth Switch
36kV
16A at 36kV

Mechanical Interlock between
Earth Blades and Disconnector
CLY 201 A7411LE

Earth Switch
36kV
400A at 36kV

Mechanical Interlock between
Earth Blades and Disconnector
Part No.
10
Specification
CLYDESDALE
Powering the Future
Substation Switches
Substation Switches are supplied with porcelain insulators as standard, Silicon Rubber Insulators are available upon request.
Description
Voltage
Interrupting
Capacity
CLY 201 A7784
Substation Disconnector 800A

36kV
16A at 36kV

sides Includes clamps for installation on
Steel Structure Phase Distance Max.
1200mm Installation Height 3.5-4.5m
Includes clamps for handle to structure and
Operating Rod
CLY 201 A7784L
Substation Loadbreak Switch

800A
36kV
400A at 36kV

Operating Rod
CLY 201 A7784E
Substation Disconnector 800A

Earth Switch
36kV
16A at 36kV

Operating Rod Includes clamps for
handle to structure, Operating Rod and
Mechanical Interlock between Earth Blades
and Disconnector
CLY 201 A7784LE
Substation Loadbreak Switch

800A
Earth Switch
36kV
400A at 36kV

Operating Rod Includes clamps for
handle to structure, Operating Rod and
Mechanical Interlock between Earth Blades
and Disconnector
Part No.
Specification
11
CLYDESDALE
Powering the Future
ABC Anchor Clamps

Used for the termination of the 2 or 4 core type ABC (Aerial Bundled Conductor), to poles or
walls by means of standard hook. The clamps are easy to install and have been tested to
international standards including ESI 43-14. The plastic parts are made of frost, heat and UV
resistant material and the aluminium parts are of a weather resistant type.
As well as the standard type anchor clamp, there is also the range taking variation which
handle all core sizes from 50 to 120mm2.
34-95
118-1202
Part No.
ENS SO 34-225
ENS SO 34-25
ENS SO 34-250
ENS SO 34-50
ENS SO 34-295
ENS SO 34-95
ENS SO 118-1202
For Conductors
2 x 25
4 x 25
2 x 25
4 x 50
2 x 95
4 x 95
4 x 50 - 120
Torque
25
25
48
48
80
80
44
Weight
0.30kg
0.41kg
0.80kg
0.93kg
1.10kg
1.69kg
1.20kg
Diameter
M20
M20
M20
M20
Length
200mm
240mm
320mm
350mm
Weight
1.22kg
1.32kg
1.51kg
1.58kg
Diameter
M16
M20
M16
M20
M24
Length
76mm
76mm
200mm
200mm
290mm
Weight
0.44kg
0.55kg
1.50kg
1.90kg
3.40kg
Diameter
M16
M16
Length
65mm
85mm
Weight
0.69kg
0.61kg
Suspension Hooks
Part No.
ENS SOT 21-00
ENS SOT 21-01
ENS SOT 21-02
ENS SOT 21-03
21-01
Nut Hooks
Part No.
ENS PD 2-3
ENS PD 2-2
ENS PD 3-3
ENS PD 3-2
ENS SOT 74
PD 2-2
Hook Plates
Part No.
ENS SOT 28-2
ENS SOT 29
SOT 28-2
ABC Wedge Set

Ideal for splitting up the cores of ABC when installing a connector, anchor or suspension
clamp.
Part No.
ENS ST 31
Weight
0.10kg
ST 31
12
CLYDESDALE
Powering the Future
SO 130
Range Taking & Multi Purpose ABC Fittings

These fittings will revolutionise the way that ABC is installed in the future. Now instead of the
confusing variety of fittings, you need, broadly speaking, only need one suspension clamp
SO 99, one anchor clamp SO 118-1202 and one wall bracket SO 125. All fittings shown
on this page have been extensively tested to and comply with ESI 43-14.
ABC Suspension Clamp Range Taking
The SO 130 & SO 136 are along the lines of traditional suspension clamps, however, these
clamps will take almost every size of ABC. This is achieved by the integral insert replacing
the traditional rubber insert. This means no mistakes by linesman taking the wrong
equipment to site and vastly reduced quantities of stock both centrally and regionally.
The SO 99 is a completely new design, the same as the SO 130 & SO 136 in that it takes
almost all sizes of ABC it also has in-built rollers, which allows the clamp to act as the
intermediate roller during erection as well. Used with the extension roller ST 26-99 it can also
act at an angle upto 90.
Part No.
ENS SO 130
ABC Sizes
2 x 50-120 / 4 x 25-120
Angle upto
60
Weight
0.3kg
ENS SO 136
2 x 50-120 / 4 x 25-120
90
0.5kg
ENS SO 99
2 x 50-120 / 4 x 25-120
30
0.9kg
n/a
90
2.3kg
ENS ST 26-99
SO 99
ABC Wall Clamp Range Taking

Works on the same basis of as the range taking Suspension Clamps in that there is an
in-built rubber insert and accepts almost all sizes of ABC.
Part No.
ENS SO 125
ABC Sizes
2 x 50-120 / 4 x 25-120
Angle upto
30
Weight
0.5kg
SO 125
Distance Nail
Used to position ABC away from a wall or a structure thus avoiding cable damage.
Part No. ENS SO 70.11
SO 70.11
ABC End Caps Range Taking
These grease filled end caps fit every size of ABC (including 120mm2), the grease is designed
to prevent water entry and seal the conductor tightly and securely.
Part No. ENS PK 99-2595 (Supplied in packs of 3)
PK 99-2595
13
7 100% Yellow
CLYDESDALE
Powering the Future
Technical Information
CLYDESDALE
Powering the Future
Technical
Information
CLYDESDALE
Powering the Future
Technical Spec. for Aerial Bundled Conductor (ABC) to ESI 43-13 Issue 2 : 1990
Nominal CSA
of Conduction
mm2
25
35
50
70
95
25
35
50
70
95
120
No. of
Cores
mm2
2
2
2
2
2
4
4
4
4
4
4
Nom. no.
of wires
in Cores
m
7
7
19
19
19
7
7
19
19
19
19
Cove
Min
mm
5.6
6.6
7.7
9.3
11.0
5.6
6.6
7.7
9.3
11.0
12.9
Max
mm
6.5
7.5
8.5
10.2
12.0
6.5
7.5
8.5
10.2
12.0
13.1
Overall
m
19.9
21.9
24.7
28.1
32.7
23.8
26.2
29.6
33.7
39.3
42.0
Weight
kg/m
0.20
0.26
0.35
0.48
0.65
0.40
0.52
0.70
0.96
1.30
1.55
Calculated
Breaking
Load
kN
8.1
11.3
15.3
22.1
30.6
16.3
22.4
30.4
44.0
61.2
79.6
Calculated Min. bending

dc resistance
radius of
@ 20C
bundle
Uohmns/km
m
1200
159
868
175
641
198
443
225
320
262
1200
190
868
210
641
237
443
270
320
314
253
336
Technical Specification for Hard Drawn Copper to BS 125

Nominal
Area
mm2
16
32
70
100
125
Nominal Imperial
Cu. Equivalent
in2
0.025
0.05
0.1
0.15
0.2
Stranding
mm
3/2.65
3/3.75
7/3.55
7/4.30
19/2.90
Overall
mm
5.69
8.05
10.65
12.9
14.5
Weight
kg/km
148.3
296.9
621.0
911.2
1130
Calculate
Breaking Load
kN
672.0
1296
2741
3838
4929
Clydesdale can take no responsibility under any circumstances, for any mistakes that may be contained within these
tables, or indeed in any other part of this catalogue. Check facts with your companys own records before making
decisions based on information received.
CLYDESDALE
Powering the Future
Technical Specification for All Aluminium Alloy Conductor (AAAC) to BS 3242:1970

Code
Name
Calculated
dc resistance
@ 20
Uohmns/km
2.771
1.749
1.384
1.093
0.9281
Breaking
Length
km
10.63
10.53
10.46
10.5
10.45
11.82
13.41
16.78
20.08
23.56
0.7804
0.6881
0.5498
0.4594
0.3917
10.48
10.44
10.43
10.45
10.44
2564
2758
3112
3398
3393
25.15
27.05
30.52
33.32
33.27
0.3669
0.3411
0.3023
0.2769
0.2787
10.47
10.45
10.44
10.46
10.41
415
497
580
659
744
4312
5164
6030
6841
7724
42.29
50.64
59.13
67.09
75.75
0.2192
0.1831
0.1568
0.1385
0.1227
10.39
10.39
10.4
10.38
10.38
835
997
1162
1319
1372
1620
2266
8664
10350
12053
13685
14233
16771
23450
84.97
101.5
118.2
134.2
139.6
164.5
230.0
0.1093
0.09156
0.07860
0.06921
0.06656
0.05662
0.04047
10.38
10.38
10.37
10.38
10.37
10.35
10.35
Box
Acacia
Almond
Cedar
Nominal
Al area
mm2
10
15
20
25
30
Stranding
& wire
m
7/1.47
7/1.85
7/2.08
7/2.34
7/2.54
Actual
area
mm2
11.88
18.82
23.79
30.10
35.47
Overall
kg/km
4.41
5.55
6.24
7.02
7.62
Weight
m
32
51
65
82
97
Fir
Hazel
Pine
35
40
50
60
70
7/2.77
7/2.95
7/3.30
7/3.61
7/3.91
42.18
47.84
59.87
71.65
84.05
8.31
8.85
9.90
10.83
11.73
115
131
164
196
230
1205
1367
1711
2048
2402
Willow
Oak
75
80
90
100
100
7/4.04
7/4.19
7/4.45
7/4.65
19/2.82
89.73
96.52
108.9
118.9
118.7
12.12
12.57
13.35
13.95
14.10
245
264
298
325
326
Mulberry
Ash
Elm
Poplar
125
150
175
200
225
19/3.18
19/3.48
19/3.76
32/2.87
37/3.05
150.9
180.7
211.0
239.4
270.3
15.90
17.40
18.80
20.09
21.35
Sycamore
Upas
Walnut
Yew
Totara
Rubus
Araucaria
250
300
350
400
425
500
700
37/3.23
37/3.53
37/3.81
37/4.06
37/4.14
61/3.50
61/4.14
303.2
362.1
421.8
479.0
498.1
586.9
821.1
22.61
24.71
26.67
28.42
28.98
31.50
37.26
Calculated
Breaking Load
kgt
kN
340
3.33
537
5.27
680
6.67
861
8.44
1014
9.94
CLYDESDALE
Powering the Future
Technical Specification for Aluminium Conductor Steel Reinforced (ACSR) to BS 215 Part 2:1970
Code
Name
Mole
Squirrel
Gopher
Weasel
Fox
Ferret
Rabbit
Mink
Skunk
Beaver
Horse
Racoon
Otter
Cat
Hare
Dog
Hyena
Cougar
Leopard
Tiger
Dingo
Wolf
Caracal
Lynx
Jaguar
Panther
Lion
Bear
Goat
Sheep
Antelope
Bison
Deer
Zebra
Elk
Camel
Moose
Nominal
Al area
mm2
10
20
25
30
35
40
50
60
60
70
70
75
80
90
100
100
100
125
125
125
150
150
175
175
200
200
225
250
300
350
350
350
400
400
450
450
500
Al
m
6/1.50
6/2.11
6/2.36
6/2.59
6/2.79
6/3.00
6/3.35
6/3.66
12/2.59
6/3.99
12/2.79
6/4.10
6/4.22
6/4.50
6/4.72
6/4.72
7/4.39
18/3.05
6/5.28
30/2.36
18/3.35
30/2.59
18/3.61
30/2.79
18/3.86
30/3.00
30/3.18
30/3.35
30/3.71
30/3.99
54/2.97
54/3.00
30/4.27
54/3.18
30/4.50
54/3.35
54/3.35
Steel
m
1/1.50
1/2.11
1/2.36
1/2.59
1/2.79
1/3.00
1/3.35
1/3.66
7/2.59
1/3.99
7/2.79
1/4.10
1/4.22
1/4.50
1/4.72
7/1.57
7/1.93
1/3.05
7/1.75
7/2.36
1/3.35
7/2.59
1/3.61
7/2.79
1/3.86
7/3.00
7/3.18
7/3.35
7/3.71
7/3.99
7/2.97
7/3.00
7/4.27
7/3.18
7/4.50
7/3.35
7/3.53
Actual
Area
mm2
4.50
6.33
7.08
7.77
8.37
9.00
10.05
10.98
12.95
11.97
13.95
12.30
12.66
13.50
14.16
14.15
14.57
15.25
15.81
16.52
16.75
18.13
18.05
19.53
19.30
21.00
22.26
23.45
25.97
27.93
26.73
27.00
29.89
28.62
31.50
30.15
31.77
Weight
kg/km
43.4
85.7
106.9
129.0
150.2
172.4
215.7
257.1
470.7
305.5
545.8
322.6
341.8
389.2
428.5
396.5
456.7
428.3
496.1
620.0
517.0
746.0
600.0
865.0
686.0
1001
1125
1248
1530
1771
1467
1497
2027
1683
2251
1849
2025
Calculated
Breaking Load
kgt
kN
421
4.13
807
7.91
979
9.60
1167
11.44
1342
13.16
1553
15.23
1872
18.36
2223
21.8
5396
52.92
2626
25.75
6240
61.19
2774
27.2
2939
28.82
3330
32.66
3666
35.95
3332
32.68
4183
41.02
3062
30.03
4156
40.76
5914
58.00
3642
35.72
7061
69.24
4191
41.10
8136
79.79
4749
46.57
9407
92.25
10248
100.5
11339
111.2
13848
135.8
15938
156.3
12084
118.5
12328
120.9
18202
178.5
13450
131.9
20221
198.3
14878
145.9
16417
161.00
Calculated
dc resistance
@ 20
Uohmns/km
2.707
1.368
1.093
0.9077
0.7823
0.6766
0.5426
0.4545
0.4568
0.3825
0.3936
0.3622
0.3419
0.3007
0.2733
0.2733
0.2728
0.2190
0.2184
0.2203
0.1814
0.1828
0.1563
0.1576
0.1367
0.1362
0.1213
0.1093
0.08911
0.07704
0.07727
0.07573
0.06727
0.06740
0.06057
0.06073
0.0547
Breaking
Length
km
9.79
9.49
9.24
9.12
9.01
9.08
8.75
8.72
11.6
8.67
11.6
8.67
8.67
8.63
8.63
8.46
9.23
7.31
8.43
9.81
7.20
9.73
7.14
9.66
7.08
9.66
9.36
9.34
9.30
9.25
8.55
8.54
9.23
8.29
9.23
9.25
9.41
CLYDESDALE
Powering the Future
Metric to Imperial Conversion Chart

To Convert
Centimetre to inches
Metres to feet
Metres to yards
Kilometres to miles
Sq.cm to sq. inches
Sq.m to sq. feet
Sq.m to sq. yards
Sq.km to sq. miles
Hectares to acres
Sq.km to acres
Cu.cm to cu. inches
Cu.m to cu. feet
Cu.m to cu. yards
Litres to cu. inches
Litres to UK pints
Litres to gallons
Grams to grains
Grams to ounces
Grams to pounds
Kilograms to pounds
Kilograms to tons
Tonnes to tons
Feet per minute to miles per hour
Kilometres per hour to miles per hour
Kg per sq.cm to lb. per sq.inch
Multiply by
0.3937
3.2810
1.0940
0.6214
0.1550
10.760
1.1960
0.3861
2.4710
247.105
0.0610
35.310
1.3080
61.0300
1.7598
0.2200
15.430
0.0352
0.0022
2.2050
0.0009
0.9842
0.1134
0.6213
14.200
Technical Specification for the selection of Voltage Class to ASTM D120

ASTM Voltage
Class
0
1
2
3
4
Label
Colour
Red
White
Yellow
Green
Orange
Proof Test Voltage (kV)

AC
DC
5
20
10
40
30
50
30
60
40
70
Max. Use
Voltage
1000V
7500V
17000V
26500V
36000V
CLYDESDALE
Powering the Future
Temperature
F
32
40
50
60
70
75
85
95
105
140
175
212
10
15
20
25
30
35
40
60
80
100
mph
20
30
40
50
60
70
80
90
100
110
120
130
km/h
32
48
64
80
96
112
128
144
160
176
192
208
lb./sq. ins
20
22
24
26
28
30
32
34
36
38
40
42
kg/sq.cm
1.41
1.55
1.69
1.83
1.97
2.11
2.24
2.39
2.53
2.67
2.81
2.95
Speed
Pressure
Shoe Size Converter

UK
5.5
6.5
7.5
8.5
9.5
10
10.5
11
12
USA
6.5
7.5
8.5
9.5
10
10.5
11
11.5
12.5
EURO
39
40
40.5
41
42
42.5
43
44
44.5
45
45.5
46
47
CLYDESDALE
Powering the Future
No.
Description
Code
Qty
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
M6 Hex. Nut
M6 Lock Washer
Stud Bolt (1)
Head Shear
Spacer
Main Head
Spring (144)
Slide Pin
CE-8 Snap Ring
Pin (46)
Latch
M5 x 10 Screw (D.P)
Body Head
Blade
Spring (75)
Blade Screw
Ram
P-29 Back-Up Ring (B.C)
P-29 0-Ring
Valve Screw (3)
Spring (2)
7/32" Ball
P-3 0-Ring
Release Valve Stem
E-3.2 Snap Ring
Release Lever
Release Lever Insulation
Spring (77)
E-2.5 Snap Ring
Pin (26)
Pump Piston
VC8 Oil Seal
PS-8 Pent Steal
Body
M4 x 6 Screw (F.P)
M10 x 10 Screw (F.P)
9/32" Ball
Spring (76)
M3 Flat Washer
Pin (47)
CE-6 Snap Ring
Pump Handle
Pump Handle Grip
Spring (4)
3/16" Ball
Copper Gasket
Suction Valve Screw Assy
P-26 0-Ring
Oil Reservoir (4)
Reservoir Cap
S-36 0-Ring
Body Handle
Body Handle Grip
16-01
16-02
16-03
20-02
20-70
20-04
85-37
20-71
16-09
16-10
16-11
55A-11
20A-01
20-07
16-17
16-19
16-21
16-22
16-23
16-24
16-25
16-26
16-36
16-35
16-33
20-08
20-09
16-37
16-28
16-27
16-47
40A-05
85-33
16-44
20A-02
16-42
16-41
16-40
16-39
16-38
16-29
16-30
16-31
20-10
16-48
16-49
16-50
16-51
16-55
20A-03
410-55
85-51
16-63
20-11
8
8
4
1
1
1
1
1
4
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
Model S-20 Parts List
CLYDESDALE
Powering the Future
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Description
M8 Hex. Nut
M8 Lock Washer
Main Head
Spacer
Head Shear
Stud Bolt (21)
Slide Pin
Spring (144)
2 x 10 Drive Pin
Pin (142)
CE-10 Snap Ring
Latch
Blade
M5 X 10 Screw (D.P)
Body Head
Spring (375)
Ram
Blade Screw
P-32 Back Up Ring
P-32 0-Ring
Valve Screw (3)
Spring (2)
7/32" Ball
2.5 x 10 Dowel Pin (D)
Pump Piston
VC8 Oil Seal
PS-8 Pent Seal
Body
P-3 0-Ring
Release Valve Stem
Release Lever
E-3.2 Snap Ring
Pin (26)
E-2.5 Snap Ring
Spring (371)
M10 x 12 Screw (F.P.)
9/32" Ball
Spring (76)
M3 Flat Washer
Pin (131)
CE-6 Snap Ring
4 x 16 Dowel Pin (G)
Rubber
Pump Handle
Pump Handle Grip
S-36 0-Ring
Spring (4)
3/16" Ball
Copper Gasket (6)
P-26 0-Ring
Oil Reservoir (4)
Reservoir Cap
Body Handle
Body Handle Grip
Code
40-24
40-25
24-02
24-03
24-04
24-05
20-71
85-37
5-09
24-06
40-16
24-07
24-08
55A-11
24-09
24-10
24-11
16-19
40-43
40-44
16-24
16-25
16-26
40A-03
24-12
40A-05
85-33
16-44
24-13
16-36
24-14
24-15
16-33
16-27
16-28
51-17
40-47
16-40
16-39
16-38
51-23
16-30
24-01
24-16
24-17
51-25
85-51
16-48
16-49
16-50
16-51
16-55
20A-03
410-55
24-18
24-19
Qty
8
8
1
1
1
4
1
1
1
2
4
1
2
1
1
1
1
2
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CLYDESDALE
Powering the Future
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
Description
M10 Hex. Nut
M10 Lock Washer
Main Head
4 x 36 Drive Pin
Pin (31)
CE-12.7 Snap Ring
Latch
Spring Holder
Spring (81)
Head Shear
Stud Bolt (2)
Spacer
M5 X 10 Screw (D.P)
Body Head
Blade
Spring (375)
Ram
Blade Screw
P-45 Back Up Ring (B.C)
P-45 0-Ring
Exhaust Valve Screw
Copper Gasket (4)
Spring (68)
1/4" Ball
Spring (4)
3/16" Ball
M6 x 15 Screw (F.P.|)
2.5 x 20 Drive Pin
Release Knob Label
Release knob
Release Valve Stem
P-3 0-Ring
7/32" Ball
Spring (76)
9/32" Ball
M10 x 10 Srew (F.P.)
PS-9 Pent Seal
OS-9 Oil Seal
Pump Piston
Pin (5)
CE-7 Snap Ring
Pump Handle
Pump Handle Grip
Body
Suction Tube
Filter Base Assy
P-38 0-Ring
Oil Reservoir (10)
Reservoir Cap
M4 x 5 Screw (C.P.)
Body Handle
Body Handle Grip
Code
40-31
40-32
32-01
26-02
26-03
26-04
26-05
26-06
26-07
32-02
26-09
32-03
55A-11
32-05
32-06
32-07
32-08
32-09
32-10
32-11
26-19
26-20
26-21
26-22
16-48
16-49
32-23
32-13
32-14
32-15
32-16
16-36
16-26
16-39
16-40
16-41
32-18
32A-01
32A-02
32-21
26-29
40-49
26-30
26-31
32A-04
26-34
26-35
26-37
32A-03
410-55
55A-24
26-39
26-40
Qty
8
8
1
1
2
4
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
CLYDESDALE
Powering the Future
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
Description
M8 Hex. Nut
M8 Lock Washer
Head Shear
Spacer
Head Shear Plate
Stud Bolt (9)
CE-9 Snap Ring
Pin (49)
Lock Pin
Support Plate (2)
Roller
Stud Bolt (10)
Blade
Body Head (New Style)
Cover
1.6 x 120 Piano Wire
Spring (93)
Blade Screw
Ram
P-22A Back-Up Ring (B.C)
P-22A 0-Ring
Cylinder (New Style)
G-30 Back-Up Ring (B.C)
G-30 0-Ring
1.6 x 110 Piano Wire
Valve Screw (3)
Spring (2)
7/32" Ball
Body
E-2.5 Snap Ring
Pin (26)
E-3.2 Snap Ring
Release Lever
Release Valve Stem
P-3 0-Ring
Spring (77)
M4 x 6 Screw (F.P)
M3 Flat Washer
Spring (76)
9/32" Ball
M10 x 10 Screw (F.P)
Pin (47)
CE-9 Snap Ring
Pump Handle
Pump Handle Grip
PS-8 Pent Seal
P-8 Back-Up Ring (E.L.)
Gland
Pump Piston
Spring (4)
3/16" Ball
Copper Gasket (6)
P-26 0-Ring
Oil Reservoir
Reservoir Cap
M4 x 5 Screw (C.P)
Body Handle
Grip Base
Body Handle Grip
5 x 14 Drive Pin
2 x 12 Drive Pin
Code
40-24
40-25
75-01
75-02
75-03
75-04
75-05
75-06
75-07
75-10
75-11
75-12
75-13
75-15
16-12
75-16
75-17
75-18
75-20
75-21
75-22
75-24
75-25
75-26
75-28
16-24
16-25
16-26
75-30
16-28
16-27
16-33
16-34
16-35
16-36
16-37
16-42
16-38
16-36
16-40
16-41
16-29
16-30
16-31
16-32
16-44
16-45
16-46
16-47
16-48
16-49
16-50
16-51
16-55
40A-07
410-55
55A-24
75-31
40-56
40-57
75-32
40-21
Qty
20
20
1
2
2
6
2
1
1
2
2
4
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
CLYDESDALE
Powering the Future
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
10
Description
M10 Hex. Nut
M10 Lock Washer
Main Head
4 x 36 Drive Pin
Pin (31)
CE-12.7 Snap Ring
Latch
Spring Holder
Spring (81)
Head Shear
Stud Bolt (2)
Spacer
M5 X 10 Screw (D.P)
Body Head
Blade
Spring (375)
Ram
Blade Screw
P-45 Back Up Ring (B.C)
P-45 0-Ring
Exhaust Valve Screw
Copper Gasket (4)
Spring (68)
1/4" Ball
Spring (4)
3/16" Ball
M6 x 15 Screw (F.P.|)
2.5 x 20 Drive Pin
Release Knob Label
Release Knob
Release Valve Stem
P-3 0-Ring
7/32" Ball
Spring (76)
9/32" Ball
M10 x 10 Srew (F.P.)
PS-9 Pent Seal
Code
40-31
40-32
32-01
26-02
26-03
26-04
26-05
26-06
26-07
32-02
26-09
32-03
55A-11
32-05
32-06
32-07
32-08
32-09
32-10
32-11
26-19
26-20
26-21
26-22
16-48
16-49
32-23
32-13
32-14
32-15
32-16
16-36
16-26
16-39
16-40
16-41
32-18
Qty
8
8
1
1
2
4
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
Model P-100 Parts List

CLYDESDALE

Uploaded by

Copyright:

Available Formats

CLYDESDALE

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CLYDESDALE

Uploaded by

Copyright:

Available Formats

1 100%C, 91%M, 6%K

Powering the Future

Winches & Jetting Equipment

Winches & Jetting

Underground Cable Winch 3200

Underground Cable Winch 3300

Electronic Data Recorder for underground winches

CLY 761 0010

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

CLY 760 200

Overhead Line Winch 206

Multi-Purpose Winch 210

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Overhead Line Winch 900 / 902

Overhead Line Winch 2240

Winch Model Number

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

DF5 Hydraulic Cable Pusher

DF5 Parts Description

For Cables / Ducts

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Ratchet Operated Cable Drumstand

Max. Drum Weight

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Performance of the CableJet machines can be defined as follows:

Part No. CLY 740 2001

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

CLY 740 AHP400

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Cable End Cap (Bullet)

Cable End Cap

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Max. Pull Force

Hydraulic Power Unit for Sub-Duct Pusher

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Vibrating Cable Plough

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

Max Drum Weight

Bucket Mounted Drum Lifter

640 930 3005

Max. Drum Weight

Rotating Drum Lifter

Max. Pull Force

Max. Centre Hole

640 930 3019

Rotating Drum Lifter Feeder Arm

640 930 2945

Part No. 640 930 2970

Max. Drum Weight

640 930 2955

Cable Drum Trailers

1,300kg Cable Drum Trailer Road / Rail Version

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

2,500kg Cable Drum Trailer

Large 3 Drum Cable Drum Trailer

Clydesdale Ltd t: 01234 855855 f: 01234 855800 e: sales@clydesdale.ltd.uk

Wire Winch Ropes

Clydesdale Ltd t: 01234 854944 f: 01234 856845 e: sales@clydesdale.ltd.uk

2 100%C, 9%M, 6%K