Arduino - DigitalRead
Arduino - DigitalRead
digitalRead()
Description
Reads the value from a specied digital pin, either HIGH (//www.arduino.cc/en/Reference/Constants) or LOW
(//www.arduino.cc/en/Reference/Constants).
Syntax
digitalRead(pin)
Parameters
pin: the number of the digital pin you want to read (int)
Returns
HIGH (//www.arduino.cc/en/Reference/Constants) or LOW (//www.arduino.cc/en/Reference/Constants)
Example
Sets pin 13 to the same value as pin 7, declared as an input.
int ledPin = 13; // LED connected to digital pin 13
int inPin = 7; // pushbutton connected to digital pin 7
int val = 0; // variable to store the read value
void setup()
{
pinMode(ledPin, OUTPUT); // sets the digital pin 13 as output
pinMode(inPin, INPUT); // sets the digital pin 7 as input
}
void loop()
{
val = digitalRead(inPin); // read the input pin
digitalWrite(ledPin, val); // sets the LED to the button's value
}
[Get Code] (//www.arduino.cc/en/Reference/DigitalRead?action=sourceblock&num=1)
Note
If the pin isn't connected to anything, digitalRead() can return either HIGH or LOW (and this can change randomly).
The analog input pins can be used as digital pins, referred to as A0, A1, etc.
See also
-
pinMode (//www.arduino.cc/en/Reference/PinMode)()
digitalWrite (//www.arduino.cc/en/Reference/DigitalWrite)()
Share
NEWSLETTER
2016 Arduino
About us (//www.arduino.cc/en/Main/AboutUs)
(https://twitter.com/arduino)
Contact us (//www.arduino.cc/en/Main/ContactUs)
Careers (//www.arduino.cc/Careers)
(https://www.facebook.com/ocial.arduino)
(https://www.ickr.com/photos/arduino_cc)
(https://youtube.com/arduinoteam)
(https://plus.google.com/+Arduino)